1 files changed, 101 insertions, 96 deletions

diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c
index 84ea37dae..bc8bd6577 100644
--- a/net/sunrpc/xprtrdma/rpc_rdma.c
+++ b/net/sunrpc/xprtrdma/rpc_rdma.c
@@ -71,6 +71,67 @@ static const char transfertypes[][12] = {
 };
 #endif
 
+/* The client can send a request inline as long as the RPCRDMA header
+ * plus the RPC call fit under the transport's inline limit. If the
+ * combined call message size exceeds that limit, the client must use
+ * the read chunk list for this operation.
+ */
+static bool rpcrdma_args_inline(struct rpc_rqst *rqst)
+{
+	unsigned int callsize = RPCRDMA_HDRLEN_MIN + rqst->rq_snd_buf.len;
+
+	return callsize <= RPCRDMA_INLINE_WRITE_THRESHOLD(rqst);
+}
+
+/* The client can't know how large the actual reply will be. Thus it
+ * plans for the largest possible reply for that particular ULP
+ * operation. If the maximum combined reply message size exceeds that
+ * limit, the client must provide a write list or a reply chunk for
+ * this request.
+ */
+static bool rpcrdma_results_inline(struct rpc_rqst *rqst)
+{
+	unsigned int repsize = RPCRDMA_HDRLEN_MIN + rqst->rq_rcv_buf.buflen;
+
+	return repsize <= RPCRDMA_INLINE_READ_THRESHOLD(rqst);
+}
+
+static int
+rpcrdma_tail_pullup(struct xdr_buf *buf)
+{
+	size_t tlen = buf->tail[0].iov_len;
+	size_t skip = tlen & 3;
+
+	/* Do not include the tail if it is only an XDR pad */
+	if (tlen < 4)
+		return 0;
+
+	/* xdr_write_pages() adds a pad at the beginning of the tail
+	 * if the content in "buf->pages" is unaligned. Force the
+	 * tail's actual content to land at the next XDR position
+	 * after the head instead.
+	 */
+	if (skip) {
+		unsigned char *src, *dst;
+		unsigned int count;
+
+		src = buf->tail[0].iov_base;
+		dst = buf->head[0].iov_base;
+		dst += buf->head[0].iov_len;
+
+		src += skip;
+		tlen -= skip;
+
+		dprintk("RPC:       %s: skip=%zu, memmove(%p, %p, %zu)\n",
+			__func__, skip, dst, src, tlen);
+
+		for (count = tlen; count; count--)
+			*dst++ = *src++;
+	}
+
+	return tlen;
+}
+
 /*
  * Chunk assembly from upper layer xdr_buf.
  *
@@ -122,6 +183,10 @@ rpcrdma_convert_iovs(struct xdr_buf *xdrbuf, unsigned int pos,
 	if (len && n == nsegs)
 		return -EIO;
 
+	/* When encoding the read list, the tail is always sent inline */
+	if (type == rpcrdma_readch)
+		return n;
+
 	if (xdrbuf->tail[0].iov_len) {
 		/* the rpcrdma protocol allows us to omit any trailing
 		 * xdr pad bytes, saving the server an RDMA operation. */
@@ -297,8 +362,7 @@ out:
  * pre-registered memory buffer for this request. For small amounts
  * of data, this is efficient. The cutoff value is tunable.
  */
-static int
-rpcrdma_inline_pullup(struct rpc_rqst *rqst, int pad)
+static void rpcrdma_inline_pullup(struct rpc_rqst *rqst)
 {
 	int i, npages, curlen;
 	int copy_len;
@@ -310,16 +374,9 @@ rpcrdma_inline_pullup(struct rpc_rqst *rqst, int pad)
 	destp = rqst->rq_svec[0].iov_base;
 	curlen = rqst->rq_svec[0].iov_len;
 	destp += curlen;
-	/*
-	 * Do optional padding where it makes sense. Alignment of write
-	 * payload can help the server, if our setting is accurate.
-	 */
-	pad -= (curlen + 36/*sizeof(struct rpcrdma_msg_padded)*/);
-	if (pad < 0 || rqst->rq_slen - curlen < RPCRDMA_INLINE_PAD_THRESH)
-		pad = 0;	/* don't pad this request */
 
-	dprintk("RPC:       %s: pad %d destp 0x%p len %d hdrlen %d\n",
-		__func__, pad, destp, rqst->rq_slen, curlen);
+	dprintk("RPC:       %s: destp 0x%p len %d hdrlen %d\n",
+		__func__, destp, rqst->rq_slen, curlen);
 
 	copy_len = rqst->rq_snd_buf.page_len;
 
@@ -355,7 +412,6 @@ rpcrdma_inline_pullup(struct rpc_rqst *rqst, int pad)
 		page_base = 0;
 	}
 	/* header now contains entire send message */
-	return pad;
 }
 
 /*
@@ -380,7 +436,7 @@ rpcrdma_marshal_req(struct rpc_rqst *rqst)
 	struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
 	struct rpcrdma_req *req = rpcr_to_rdmar(rqst);
 	char *base;
-	size_t rpclen, padlen;
+	size_t rpclen;
 	ssize_t hdrlen;
 	enum rpcrdma_chunktype rtype, wtype;
 	struct rpcrdma_msg *headerp;
@@ -402,28 +458,15 @@ rpcrdma_marshal_req(struct rpc_rqst *rqst)
 	/*
 	 * Chunks needed for results?
 	 *
+	 * o Read ops return data as write chunk(s), header as inline.
 	 * o If the expected result is under the inline threshold, all ops
-	 *   return as inline (but see later).
+	 *   return as inline.
 	 * o Large non-read ops return as a single reply chunk.
-	 * o Large read ops return data as write chunk(s), header as inline.
-	 *
-	 * Note: the NFS code sending down multiple result segments implies
-	 * the op is one of read, readdir[plus], readlink or NFSv4 getacl.
-	 */
-
-	/*
-	 * This code can handle read chunks, write chunks OR reply
-	 * chunks -- only one type. If the request is too big to fit
-	 * inline, then we will choose read chunks. If the request is
-	 * a READ, then use write chunks to separate the file data
-	 * into pages; otherwise use reply chunks.
 	 */
-	if (rqst->rq_rcv_buf.buflen <= RPCRDMA_INLINE_READ_THRESHOLD(rqst))
-		wtype = rpcrdma_noch;
-	else if (rqst->rq_rcv_buf.page_len == 0)
-		wtype = rpcrdma_replych;
-	else if (rqst->rq_rcv_buf.flags & XDRBUF_READ)
+	if (rqst->rq_rcv_buf.flags & XDRBUF_READ)
 		wtype = rpcrdma_writech;
+	else if (rpcrdma_results_inline(rqst))
+		wtype = rpcrdma_noch;
 	else
 		wtype = rpcrdma_replych;
 
@@ -432,21 +475,25 @@ rpcrdma_marshal_req(struct rpc_rqst *rqst)
 	 *
 	 * o If the total request is under the inline threshold, all ops
 	 *   are sent as inline.
-	 * o Large non-write ops are sent with the entire message as a
-	 *   single read chunk (protocol 0-position special case).
 	 * o Large write ops transmit data as read chunk(s), header as
 	 *   inline.
+	 * o Large non-write ops are sent with the entire message as a
+	 *   single read chunk (protocol 0-position special case).
 	 *
-	 * Note: the NFS code sending down multiple argument segments
-	 * implies the op is a write.
-	 * TBD check NFSv4 setacl
+	 * This assumes that the upper layer does not present a request
+	 * that both has a data payload, and whose non-data arguments
+	 * by themselves are larger than the inline threshold.
 	 */
-	if (rqst->rq_snd_buf.len <= RPCRDMA_INLINE_WRITE_THRESHOLD(rqst))
+	if (rpcrdma_args_inline(rqst)) {
 		rtype = rpcrdma_noch;
-	else if (rqst->rq_snd_buf.page_len == 0)
-		rtype = rpcrdma_areadch;
-	else
+	} else if (rqst->rq_snd_buf.flags & XDRBUF_WRITE) {
 		rtype = rpcrdma_readch;
+	} else {
+		r_xprt->rx_stats.nomsg_call_count++;
+		headerp->rm_type = htonl(RDMA_NOMSG);
+		rtype = rpcrdma_areadch;
+		rpclen = 0;
+	}
 
 	/* The following simplification is not true forever */
 	if (rtype != rpcrdma_noch && wtype == rpcrdma_replych)
@@ -458,7 +505,6 @@ rpcrdma_marshal_req(struct rpc_rqst *rqst)
 	}
 
 	hdrlen = RPCRDMA_HDRLEN_MIN;
-	padlen = 0;
 
 	/*
 	 * Pull up any extra send data into the preregistered buffer.
@@ -467,45 +513,15 @@ rpcrdma_marshal_req(struct rpc_rqst *rqst)
 	 */
 	if (rtype == rpcrdma_noch) {
 
-		padlen = rpcrdma_inline_pullup(rqst,
-						RPCRDMA_INLINE_PAD_VALUE(rqst));
-
-		if (padlen) {
-			headerp->rm_type = rdma_msgp;
-			headerp->rm_body.rm_padded.rm_align =
-				cpu_to_be32(RPCRDMA_INLINE_PAD_VALUE(rqst));
-			headerp->rm_body.rm_padded.rm_thresh =
-				cpu_to_be32(RPCRDMA_INLINE_PAD_THRESH);
-			headerp->rm_body.rm_padded.rm_pempty[0] = xdr_zero;
-			headerp->rm_body.rm_padded.rm_pempty[1] = xdr_zero;
-			headerp->rm_body.rm_padded.rm_pempty[2] = xdr_zero;
-			hdrlen += 2 * sizeof(u32); /* extra words in padhdr */
-			if (wtype != rpcrdma_noch) {
-				dprintk("RPC:       %s: invalid chunk list\n",
-					__func__);
-				return -EIO;
-			}
-		} else {
-			headerp->rm_body.rm_nochunks.rm_empty[0] = xdr_zero;
-			headerp->rm_body.rm_nochunks.rm_empty[1] = xdr_zero;
-			headerp->rm_body.rm_nochunks.rm_empty[2] = xdr_zero;
-			/* new length after pullup */
-			rpclen = rqst->rq_svec[0].iov_len;
-			/*
-			 * Currently we try to not actually use read inline.
-			 * Reply chunks have the desirable property that
-			 * they land, packed, directly in the target buffers
-			 * without headers, so they require no fixup. The
-			 * additional RDMA Write op sends the same amount
-			 * of data, streams on-the-wire and adds no overhead
-			 * on receive. Therefore, we request a reply chunk
-			 * for non-writes wherever feasible and efficient.
-			 */
-			if (wtype == rpcrdma_noch)
-				wtype = rpcrdma_replych;
-		}
-	}
+		rpcrdma_inline_pullup(rqst);
 
+		headerp->rm_body.rm_nochunks.rm_empty[0] = xdr_zero;
+		headerp->rm_body.rm_nochunks.rm_empty[1] = xdr_zero;
+		headerp->rm_body.rm_nochunks.rm_empty[2] = xdr_zero;
+		/* new length after pullup */
+		rpclen = rqst->rq_svec[0].iov_len;
+	} else if (rtype == rpcrdma_readch)
+		rpclen += rpcrdma_tail_pullup(&rqst->rq_snd_buf);
 	if (rtype != rpcrdma_noch) {
 		hdrlen = rpcrdma_create_chunks(rqst, &rqst->rq_snd_buf,
 					       headerp, rtype);
@@ -518,9 +534,9 @@ rpcrdma_marshal_req(struct rpc_rqst *rqst)
 	if (hdrlen < 0)
 		return hdrlen;
 
-	dprintk("RPC:       %s: %s: hdrlen %zd rpclen %zd padlen %zd"
+	dprintk("RPC:       %s: %s: hdrlen %zd rpclen %zd"
 		" headerp 0x%p base 0x%p lkey 0x%x\n",
-		__func__, transfertypes[wtype], hdrlen, rpclen, padlen,
+		__func__, transfertypes[wtype], hdrlen, rpclen,
 		headerp, base, rdmab_lkey(req->rl_rdmabuf));
 
 	/*
@@ -534,26 +550,15 @@ rpcrdma_marshal_req(struct rpc_rqst *rqst)
 	req->rl_send_iov[0].length = hdrlen;
 	req->rl_send_iov[0].lkey = rdmab_lkey(req->rl_rdmabuf);
 
+	req->rl_niovs = 1;
+	if (rtype == rpcrdma_areadch)
+		return 0;
+
 	req->rl_send_iov[1].addr = rdmab_addr(req->rl_sendbuf);
 	req->rl_send_iov[1].length = rpclen;
 	req->rl_send_iov[1].lkey = rdmab_lkey(req->rl_sendbuf);
 
 	req->rl_niovs = 2;
-
-	if (padlen) {
-		struct rpcrdma_ep *ep = &r_xprt->rx_ep;
-
-		req->rl_send_iov[2].addr = rdmab_addr(ep->rep_padbuf);
-		req->rl_send_iov[2].length = padlen;
-		req->rl_send_iov[2].lkey = rdmab_lkey(ep->rep_padbuf);
-
-		req->rl_send_iov[3].addr = req->rl_send_iov[1].addr + rpclen;
-		req->rl_send_iov[3].length = rqst->rq_slen - rpclen;
-		req->rl_send_iov[3].lkey = rdmab_lkey(req->rl_sendbuf);
-
-		req->rl_niovs = 4;
-	}
-
 	return 0;
 }