diff options
Diffstat (limited to 'net/wireless/reg.c')
| -rw-r--r-- | net/wireless/reg.c | 3205 |
1 files changed, 3205 insertions, 0 deletions
diff --git a/net/wireless/reg.c b/net/wireless/reg.c new file mode 100644 index 000000000..0e347f888 --- /dev/null +++ b/net/wireless/reg.c @@ -0,0 +1,3205 @@ +/* + * Copyright 2002-2005, Instant802 Networks, Inc. + * Copyright 2005-2006, Devicescape Software, Inc. + * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> + * Copyright 2008-2011 Luis R. Rodriguez <mcgrof@qca.qualcomm.com> + * Copyright 2013-2014 Intel Mobile Communications GmbH + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + + +/** + * DOC: Wireless regulatory infrastructure + * + * The usual implementation is for a driver to read a device EEPROM to + * determine which regulatory domain it should be operating under, then + * looking up the allowable channels in a driver-local table and finally + * registering those channels in the wiphy structure. + * + * Another set of compliance enforcement is for drivers to use their + * own compliance limits which can be stored on the EEPROM. The host + * driver or firmware may ensure these are used. + * + * In addition to all this we provide an extra layer of regulatory + * conformance. For drivers which do not have any regulatory + * information CRDA provides the complete regulatory solution. + * For others it provides a community effort on further restrictions + * to enhance compliance. + * + * Note: When number of rules --> infinity we will not be able to + * index on alpha2 any more, instead we'll probably have to + * rely on some SHA1 checksum of the regdomain for example. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/ctype.h> +#include <linux/nl80211.h> +#include <linux/platform_device.h> +#include <linux/moduleparam.h> +#include <net/cfg80211.h> +#include "core.h" +#include "reg.h" +#include "rdev-ops.h" +#include "regdb.h" +#include "nl80211.h" + +#ifdef CONFIG_CFG80211_REG_DEBUG +#define REG_DBG_PRINT(format, args...) \ + printk(KERN_DEBUG pr_fmt(format), ##args) +#else +#define REG_DBG_PRINT(args...) +#endif + +/* + * Grace period we give before making sure all current interfaces reside on + * channels allowed by the current regulatory domain. + */ +#define REG_ENFORCE_GRACE_MS 60000 + +/** + * enum reg_request_treatment - regulatory request treatment + * + * @REG_REQ_OK: continue processing the regulatory request + * @REG_REQ_IGNORE: ignore the regulatory request + * @REG_REQ_INTERSECT: the regulatory domain resulting from this request should + * be intersected with the current one. + * @REG_REQ_ALREADY_SET: the regulatory request will not change the current + * regulatory settings, and no further processing is required. + */ +enum reg_request_treatment { + REG_REQ_OK, + REG_REQ_IGNORE, + REG_REQ_INTERSECT, + REG_REQ_ALREADY_SET, +}; + +static struct regulatory_request core_request_world = { + .initiator = NL80211_REGDOM_SET_BY_CORE, + .alpha2[0] = '0', + .alpha2[1] = '0', + .intersect = false, + .processed = true, + .country_ie_env = ENVIRON_ANY, +}; + +/* + * Receipt of information from last regulatory request, + * protected by RTNL (and can be accessed with RCU protection) + */ +static struct regulatory_request __rcu *last_request = + (void __force __rcu *)&core_request_world; + +/* To trigger userspace events */ +static struct platform_device *reg_pdev; + +/* + * Central wireless core regulatory domains, we only need two, + * the current one and a world regulatory domain in case we have no + * information to give us an alpha2. + * (protected by RTNL, can be read under RCU) + */ +const struct ieee80211_regdomain __rcu *cfg80211_regdomain; + +/* + * Number of devices that registered to the core + * that support cellular base station regulatory hints + * (protected by RTNL) + */ +static int reg_num_devs_support_basehint; + +/* + * State variable indicating if the platform on which the devices + * are attached is operating in an indoor environment. The state variable + * is relevant for all registered devices. + */ +static bool reg_is_indoor; +static spinlock_t reg_indoor_lock; + +/* Used to track the userspace process controlling the indoor setting */ +static u32 reg_is_indoor_portid; + +/* Max number of consecutive attempts to communicate with CRDA */ +#define REG_MAX_CRDA_TIMEOUTS 10 + +static u32 reg_crda_timeouts; + +static const struct ieee80211_regdomain *get_cfg80211_regdom(void) +{ + return rtnl_dereference(cfg80211_regdomain); +} + +const struct ieee80211_regdomain *get_wiphy_regdom(struct wiphy *wiphy) +{ + return rtnl_dereference(wiphy->regd); +} + +static const char *reg_dfs_region_str(enum nl80211_dfs_regions dfs_region) +{ + switch (dfs_region) { + case NL80211_DFS_UNSET: + return "unset"; + case NL80211_DFS_FCC: + return "FCC"; + case NL80211_DFS_ETSI: + return "ETSI"; + case NL80211_DFS_JP: + return "JP"; + } + return "Unknown"; +} + +enum nl80211_dfs_regions reg_get_dfs_region(struct wiphy *wiphy) +{ + const struct ieee80211_regdomain *regd = NULL; + const struct ieee80211_regdomain *wiphy_regd = NULL; + + regd = get_cfg80211_regdom(); + if (!wiphy) + goto out; + + wiphy_regd = get_wiphy_regdom(wiphy); + if (!wiphy_regd) + goto out; + + if (wiphy_regd->dfs_region == regd->dfs_region) + goto out; + + REG_DBG_PRINT("%s: device specific dfs_region " + "(%s) disagrees with cfg80211's " + "central dfs_region (%s)\n", + dev_name(&wiphy->dev), + reg_dfs_region_str(wiphy_regd->dfs_region), + reg_dfs_region_str(regd->dfs_region)); + +out: + return regd->dfs_region; +} + +static void rcu_free_regdom(const struct ieee80211_regdomain *r) +{ + if (!r) + return; + kfree_rcu((struct ieee80211_regdomain *)r, rcu_head); +} + +static struct regulatory_request *get_last_request(void) +{ + return rcu_dereference_rtnl(last_request); +} + +/* Used to queue up regulatory hints */ +static LIST_HEAD(reg_requests_list); +static spinlock_t reg_requests_lock; + +/* Used to queue up beacon hints for review */ +static LIST_HEAD(reg_pending_beacons); +static spinlock_t reg_pending_beacons_lock; + +/* Used to keep track of processed beacon hints */ +static LIST_HEAD(reg_beacon_list); + +struct reg_beacon { + struct list_head list; + struct ieee80211_channel chan; +}; + +static void reg_check_chans_work(struct work_struct *work); +static DECLARE_DELAYED_WORK(reg_check_chans, reg_check_chans_work); + +static void reg_todo(struct work_struct *work); +static DECLARE_WORK(reg_work, reg_todo); + +static void reg_timeout_work(struct work_struct *work); +static DECLARE_DELAYED_WORK(reg_timeout, reg_timeout_work); + +/* We keep a static world regulatory domain in case of the absence of CRDA */ +static const struct ieee80211_regdomain world_regdom = { + .n_reg_rules = 8, + .alpha2 = "00", + .reg_rules = { + /* IEEE 802.11b/g, channels 1..11 */ + REG_RULE(2412-10, 2462+10, 40, 6, 20, 0), + /* IEEE 802.11b/g, channels 12..13. */ + REG_RULE(2467-10, 2472+10, 40, 6, 20, + NL80211_RRF_NO_IR), + /* IEEE 802.11 channel 14 - Only JP enables + * this and for 802.11b only */ + REG_RULE(2484-10, 2484+10, 20, 6, 20, + NL80211_RRF_NO_IR | + NL80211_RRF_NO_OFDM), + /* IEEE 802.11a, channel 36..48 */ + REG_RULE(5180-10, 5240+10, 160, 6, 20, + NL80211_RRF_NO_IR), + + /* IEEE 802.11a, channel 52..64 - DFS required */ + REG_RULE(5260-10, 5320+10, 160, 6, 20, + NL80211_RRF_NO_IR | + NL80211_RRF_DFS), + + /* IEEE 802.11a, channel 100..144 - DFS required */ + REG_RULE(5500-10, 5720+10, 160, 6, 20, + NL80211_RRF_NO_IR | + NL80211_RRF_DFS), + + /* IEEE 802.11a, channel 149..165 */ + REG_RULE(5745-10, 5825+10, 80, 6, 20, + NL80211_RRF_NO_IR), + + /* IEEE 802.11ad (60gHz), channels 1..3 */ + REG_RULE(56160+2160*1-1080, 56160+2160*3+1080, 2160, 0, 0, 0), + } +}; + +/* protected by RTNL */ +static const struct ieee80211_regdomain *cfg80211_world_regdom = + &world_regdom; + +static char *ieee80211_regdom = "00"; +static char user_alpha2[2]; + +module_param(ieee80211_regdom, charp, 0444); +MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); + +static void reg_free_request(struct regulatory_request *request) +{ + if (request != get_last_request()) + kfree(request); +} + +static void reg_free_last_request(void) +{ + struct regulatory_request *lr = get_last_request(); + + if (lr != &core_request_world && lr) + kfree_rcu(lr, rcu_head); +} + +static void reg_update_last_request(struct regulatory_request *request) +{ + struct regulatory_request *lr; + + lr = get_last_request(); + if (lr == request) + return; + + reg_free_last_request(); + rcu_assign_pointer(last_request, request); +} + +static void reset_regdomains(bool full_reset, + const struct ieee80211_regdomain *new_regdom) +{ + const struct ieee80211_regdomain *r; + + ASSERT_RTNL(); + + r = get_cfg80211_regdom(); + + /* avoid freeing static information or freeing something twice */ + if (r == cfg80211_world_regdom) + r = NULL; + if (cfg80211_world_regdom == &world_regdom) + cfg80211_world_regdom = NULL; + if (r == &world_regdom) + r = NULL; + + rcu_free_regdom(r); + rcu_free_regdom(cfg80211_world_regdom); + + cfg80211_world_regdom = &world_regdom; + rcu_assign_pointer(cfg80211_regdomain, new_regdom); + + if (!full_reset) + return; + + reg_update_last_request(&core_request_world); +} + +/* + * Dynamic world regulatory domain requested by the wireless + * core upon initialization + */ +static void update_world_regdomain(const struct ieee80211_regdomain *rd) +{ + struct regulatory_request *lr; + + lr = get_last_request(); + + WARN_ON(!lr); + + reset_regdomains(false, rd); + + cfg80211_world_regdom = rd; +} + +bool is_world_regdom(const char *alpha2) +{ + if (!alpha2) + return false; + return alpha2[0] == '0' && alpha2[1] == '0'; +} + +static bool is_alpha2_set(const char *alpha2) +{ + if (!alpha2) + return false; + return alpha2[0] && alpha2[1]; +} + +static bool is_unknown_alpha2(const char *alpha2) +{ + if (!alpha2) + return false; + /* + * Special case where regulatory domain was built by driver + * but a specific alpha2 cannot be determined + */ + return alpha2[0] == '9' && alpha2[1] == '9'; +} + +static bool is_intersected_alpha2(const char *alpha2) +{ + if (!alpha2) + return false; + /* + * Special case where regulatory domain is the + * result of an intersection between two regulatory domain + * structures + */ + return alpha2[0] == '9' && alpha2[1] == '8'; +} + +static bool is_an_alpha2(const char *alpha2) +{ + if (!alpha2) + return false; + return isalpha(alpha2[0]) && isalpha(alpha2[1]); +} + +static bool alpha2_equal(const char *alpha2_x, const char *alpha2_y) +{ + if (!alpha2_x || !alpha2_y) + return false; + return alpha2_x[0] == alpha2_y[0] && alpha2_x[1] == alpha2_y[1]; +} + +static bool regdom_changes(const char *alpha2) +{ + const struct ieee80211_regdomain *r = get_cfg80211_regdom(); + + if (!r) + return true; + return !alpha2_equal(r->alpha2, alpha2); +} + +/* + * The NL80211_REGDOM_SET_BY_USER regdom alpha2 is cached, this lets + * you know if a valid regulatory hint with NL80211_REGDOM_SET_BY_USER + * has ever been issued. + */ +static bool is_user_regdom_saved(void) +{ + if (user_alpha2[0] == '9' && user_alpha2[1] == '7') + return false; + + /* This would indicate a mistake on the design */ + if (WARN(!is_world_regdom(user_alpha2) && !is_an_alpha2(user_alpha2), + "Unexpected user alpha2: %c%c\n", + user_alpha2[0], user_alpha2[1])) + return false; + + return true; +} + +static const struct ieee80211_regdomain * +reg_copy_regd(const struct ieee80211_regdomain *src_regd) +{ + struct ieee80211_regdomain *regd; + int size_of_regd; + unsigned int i; + + size_of_regd = + sizeof(struct ieee80211_regdomain) + + src_regd->n_reg_rules * sizeof(struct ieee80211_reg_rule); + + regd = kzalloc(size_of_regd, GFP_KERNEL); + if (!regd) + return ERR_PTR(-ENOMEM); + + memcpy(regd, src_regd, sizeof(struct ieee80211_regdomain)); + + for (i = 0; i < src_regd->n_reg_rules; i++) + memcpy(®d->reg_rules[i], &src_regd->reg_rules[i], + sizeof(struct ieee80211_reg_rule)); + + return regd; +} + +#ifdef CONFIG_CFG80211_INTERNAL_REGDB +struct reg_regdb_search_request { + char alpha2[2]; + struct list_head list; +}; + +static LIST_HEAD(reg_regdb_search_list); +static DEFINE_MUTEX(reg_regdb_search_mutex); + +static void reg_regdb_search(struct work_struct *work) +{ + struct reg_regdb_search_request *request; + const struct ieee80211_regdomain *curdom, *regdom = NULL; + int i; + + rtnl_lock(); + + mutex_lock(®_regdb_search_mutex); + while (!list_empty(®_regdb_search_list)) { + request = list_first_entry(®_regdb_search_list, + struct reg_regdb_search_request, + list); + list_del(&request->list); + + for (i = 0; i < reg_regdb_size; i++) { + curdom = reg_regdb[i]; + + if (alpha2_equal(request->alpha2, curdom->alpha2)) { + regdom = reg_copy_regd(curdom); + break; + } + } + + kfree(request); + } + mutex_unlock(®_regdb_search_mutex); + + if (!IS_ERR_OR_NULL(regdom)) + set_regdom(regdom, REGD_SOURCE_INTERNAL_DB); + + rtnl_unlock(); +} + +static DECLARE_WORK(reg_regdb_work, reg_regdb_search); + +static void reg_regdb_query(const char *alpha2) +{ + struct reg_regdb_search_request *request; + + if (!alpha2) + return; + + request = kzalloc(sizeof(struct reg_regdb_search_request), GFP_KERNEL); + if (!request) + return; + + memcpy(request->alpha2, alpha2, 2); + + mutex_lock(®_regdb_search_mutex); + list_add_tail(&request->list, ®_regdb_search_list); + mutex_unlock(®_regdb_search_mutex); + + schedule_work(®_regdb_work); +} + +/* Feel free to add any other sanity checks here */ +static void reg_regdb_size_check(void) +{ + /* We should ideally BUILD_BUG_ON() but then random builds would fail */ + WARN_ONCE(!reg_regdb_size, "db.txt is empty, you should update it..."); +} +#else +static inline void reg_regdb_size_check(void) {} +static inline void reg_regdb_query(const char *alpha2) {} +#endif /* CONFIG_CFG80211_INTERNAL_REGDB */ + +/* + * This lets us keep regulatory code which is updated on a regulatory + * basis in userspace. + */ +static int call_crda(const char *alpha2) +{ + char country[12]; + char *env[] = { country, NULL }; + + snprintf(country, sizeof(country), "COUNTRY=%c%c", + alpha2[0], alpha2[1]); + + /* query internal regulatory database (if it exists) */ + reg_regdb_query(alpha2); + + if (reg_crda_timeouts > REG_MAX_CRDA_TIMEOUTS) { + pr_info("Exceeded CRDA call max attempts. Not calling CRDA\n"); + return -EINVAL; + } + + if (!is_world_regdom((char *) alpha2)) + pr_info("Calling CRDA for country: %c%c\n", + alpha2[0], alpha2[1]); + else + pr_info("Calling CRDA to update world regulatory domain\n"); + + return kobject_uevent_env(®_pdev->dev.kobj, KOBJ_CHANGE, env); +} + +static enum reg_request_treatment +reg_call_crda(struct regulatory_request *request) +{ + if (call_crda(request->alpha2)) + return REG_REQ_IGNORE; + + queue_delayed_work(system_power_efficient_wq, + ®_timeout, msecs_to_jiffies(3142)); + return REG_REQ_OK; +} + +bool reg_is_valid_request(const char *alpha2) +{ + struct regulatory_request *lr = get_last_request(); + + if (!lr || lr->processed) + return false; + + return alpha2_equal(lr->alpha2, alpha2); +} + +static const struct ieee80211_regdomain *reg_get_regdomain(struct wiphy *wiphy) +{ + struct regulatory_request *lr = get_last_request(); + + /* + * Follow the driver's regulatory domain, if present, unless a country + * IE has been processed or a user wants to help complaince further + */ + if (lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && + lr->initiator != NL80211_REGDOM_SET_BY_USER && + wiphy->regd) + return get_wiphy_regdom(wiphy); + + return get_cfg80211_regdom(); +} + +static unsigned int +reg_get_max_bandwidth_from_range(const struct ieee80211_regdomain *rd, + const struct ieee80211_reg_rule *rule) +{ + const struct ieee80211_freq_range *freq_range = &rule->freq_range; + const struct ieee80211_freq_range *freq_range_tmp; + const struct ieee80211_reg_rule *tmp; + u32 start_freq, end_freq, idx, no; + + for (idx = 0; idx < rd->n_reg_rules; idx++) + if (rule == &rd->reg_rules[idx]) + break; + + if (idx == rd->n_reg_rules) + return 0; + + /* get start_freq */ + no = idx; + + while (no) { + tmp = &rd->reg_rules[--no]; + freq_range_tmp = &tmp->freq_range; + + if (freq_range_tmp->end_freq_khz < freq_range->start_freq_khz) + break; + + freq_range = freq_range_tmp; + } + + start_freq = freq_range->start_freq_khz; + + /* get end_freq */ + freq_range = &rule->freq_range; + no = idx; + + while (no < rd->n_reg_rules - 1) { + tmp = &rd->reg_rules[++no]; + freq_range_tmp = &tmp->freq_range; + + if (freq_range_tmp->start_freq_khz > freq_range->end_freq_khz) + break; + + freq_range = freq_range_tmp; + } + + end_freq = freq_range->end_freq_khz; + + return end_freq - start_freq; +} + +unsigned int reg_get_max_bandwidth(const struct ieee80211_regdomain *rd, + const struct ieee80211_reg_rule *rule) +{ + unsigned int bw = reg_get_max_bandwidth_from_range(rd, rule); + + if (rule->flags & NL80211_RRF_NO_160MHZ) + bw = min_t(unsigned int, bw, MHZ_TO_KHZ(80)); + if (rule->flags & NL80211_RRF_NO_80MHZ) + bw = min_t(unsigned int, bw, MHZ_TO_KHZ(40)); + + /* + * HT40+/HT40- limits are handled per-channel. Only limit BW if both + * are not allowed. + */ + if (rule->flags & NL80211_RRF_NO_HT40MINUS && + rule->flags & NL80211_RRF_NO_HT40PLUS) + bw = min_t(unsigned int, bw, MHZ_TO_KHZ(20)); + + return bw; +} + +/* Sanity check on a regulatory rule */ +static bool is_valid_reg_rule(const struct ieee80211_reg_rule *rule) +{ + const struct ieee80211_freq_range *freq_range = &rule->freq_range; + u32 freq_diff; + + if (freq_range->start_freq_khz <= 0 || freq_range->end_freq_khz <= 0) + return false; + + if (freq_range->start_freq_khz > freq_range->end_freq_khz) + return false; + + freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz; + + if (freq_range->end_freq_khz <= freq_range->start_freq_khz || + freq_range->max_bandwidth_khz > freq_diff) + return false; + + return true; +} + +static bool is_valid_rd(const struct ieee80211_regdomain *rd) +{ + const struct ieee80211_reg_rule *reg_rule = NULL; + unsigned int i; + + if (!rd->n_reg_rules) + return false; + + if (WARN_ON(rd->n_reg_rules > NL80211_MAX_SUPP_REG_RULES)) + return false; + + for (i = 0; i < rd->n_reg_rules; i++) { + reg_rule = &rd->reg_rules[i]; + if (!is_valid_reg_rule(reg_rule)) + return false; + } + + return true; +} + +static bool reg_does_bw_fit(const struct ieee80211_freq_range *freq_range, + u32 center_freq_khz, u32 bw_khz) +{ + u32 start_freq_khz, end_freq_khz; + + start_freq_khz = center_freq_khz - (bw_khz/2); + end_freq_khz = center_freq_khz + (bw_khz/2); + + if (start_freq_khz >= freq_range->start_freq_khz && + end_freq_khz <= freq_range->end_freq_khz) + return true; + + return false; +} + +/** + * freq_in_rule_band - tells us if a frequency is in a frequency band + * @freq_range: frequency rule we want to query + * @freq_khz: frequency we are inquiring about + * + * This lets us know if a specific frequency rule is or is not relevant to + * a specific frequency's band. Bands are device specific and artificial + * definitions (the "2.4 GHz band", the "5 GHz band" and the "60GHz band"), + * however it is safe for now to assume that a frequency rule should not be + * part of a frequency's band if the start freq or end freq are off by more + * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 10 GHz for the + * 60 GHz band. + * This resolution can be lowered and should be considered as we add + * regulatory rule support for other "bands". + **/ +static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range, + u32 freq_khz) +{ +#define ONE_GHZ_IN_KHZ 1000000 + /* + * From 802.11ad: directional multi-gigabit (DMG): + * Pertaining to operation in a frequency band containing a channel + * with the Channel starting frequency above 45 GHz. + */ + u32 limit = freq_khz > 45 * ONE_GHZ_IN_KHZ ? + 10 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ; + if (abs(freq_khz - freq_range->start_freq_khz) <= limit) + return true; + if (abs(freq_khz - freq_range->end_freq_khz) <= limit) + return true; + return false; +#undef ONE_GHZ_IN_KHZ +} + +/* + * Later on we can perhaps use the more restrictive DFS + * region but we don't have information for that yet so + * for now simply disallow conflicts. + */ +static enum nl80211_dfs_regions +reg_intersect_dfs_region(const enum nl80211_dfs_regions dfs_region1, + const enum nl80211_dfs_regions dfs_region2) +{ + if (dfs_region1 != dfs_region2) + return NL80211_DFS_UNSET; + return dfs_region1; +} + +/* + * Helper for regdom_intersect(), this does the real + * mathematical intersection fun + */ +static int reg_rules_intersect(const struct ieee80211_regdomain *rd1, + const struct ieee80211_regdomain *rd2, + const struct ieee80211_reg_rule *rule1, + const struct ieee80211_reg_rule *rule2, + struct ieee80211_reg_rule *intersected_rule) +{ + const struct ieee80211_freq_range *freq_range1, *freq_range2; + struct ieee80211_freq_range *freq_range; + const struct ieee80211_power_rule *power_rule1, *power_rule2; + struct ieee80211_power_rule *power_rule; + u32 freq_diff, max_bandwidth1, max_bandwidth2; + + freq_range1 = &rule1->freq_range; + freq_range2 = &rule2->freq_range; + freq_range = &intersected_rule->freq_range; + + power_rule1 = &rule1->power_rule; + power_rule2 = &rule2->power_rule; + power_rule = &intersected_rule->power_rule; + + freq_range->start_freq_khz = max(freq_range1->start_freq_khz, + freq_range2->start_freq_khz); + freq_range->end_freq_khz = min(freq_range1->end_freq_khz, + freq_range2->end_freq_khz); + + max_bandwidth1 = freq_range1->max_bandwidth_khz; + max_bandwidth2 = freq_range2->max_bandwidth_khz; + + if (rule1->flags & NL80211_RRF_AUTO_BW) + max_bandwidth1 = reg_get_max_bandwidth(rd1, rule1); + if (rule2->flags & NL80211_RRF_AUTO_BW) + max_bandwidth2 = reg_get_max_bandwidth(rd2, rule2); + + freq_range->max_bandwidth_khz = min(max_bandwidth1, max_bandwidth2); + + intersected_rule->flags = rule1->flags | rule2->flags; + + /* + * In case NL80211_RRF_AUTO_BW requested for both rules + * set AUTO_BW in intersected rule also. Next we will + * calculate BW correctly in handle_channel function. + * In other case remove AUTO_BW flag while we calculate + * maximum bandwidth correctly and auto calculation is + * not required. + */ + if ((rule1->flags & NL80211_RRF_AUTO_BW) && + (rule2->flags & NL80211_RRF_AUTO_BW)) + intersected_rule->flags |= NL80211_RRF_AUTO_BW; + else + intersected_rule->flags &= ~NL80211_RRF_AUTO_BW; + + freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz; + if (freq_range->max_bandwidth_khz > freq_diff) + freq_range->max_bandwidth_khz = freq_diff; + + power_rule->max_eirp = min(power_rule1->max_eirp, + power_rule2->max_eirp); + power_rule->max_antenna_gain = min(power_rule1->max_antenna_gain, + power_rule2->max_antenna_gain); + + intersected_rule->dfs_cac_ms = max(rule1->dfs_cac_ms, + rule2->dfs_cac_ms); + + if (!is_valid_reg_rule(intersected_rule)) + return -EINVAL; + + return 0; +} + +/* check whether old rule contains new rule */ +static bool rule_contains(struct ieee80211_reg_rule *r1, + struct ieee80211_reg_rule *r2) +{ + /* for simplicity, currently consider only same flags */ + if (r1->flags != r2->flags) + return false; + + /* verify r1 is more restrictive */ + if ((r1->power_rule.max_antenna_gain > + r2->power_rule.max_antenna_gain) || + r1->power_rule.max_eirp > r2->power_rule.max_eirp) + return false; + + /* make sure r2's range is contained within r1 */ + if (r1->freq_range.start_freq_khz > r2->freq_range.start_freq_khz || + r1->freq_range.end_freq_khz < r2->freq_range.end_freq_khz) + return false; + + /* and finally verify that r1.max_bw >= r2.max_bw */ + if (r1->freq_range.max_bandwidth_khz < + r2->freq_range.max_bandwidth_khz) + return false; + + return true; +} + +/* add or extend current rules. do nothing if rule is already contained */ +static void add_rule(struct ieee80211_reg_rule *rule, + struct ieee80211_reg_rule *reg_rules, u32 *n_rules) +{ + struct ieee80211_reg_rule *tmp_rule; + int i; + + for (i = 0; i < *n_rules; i++) { + tmp_rule = ®_rules[i]; + /* rule is already contained - do nothing */ + if (rule_contains(tmp_rule, rule)) + return; + + /* extend rule if possible */ + if (rule_contains(rule, tmp_rule)) { + memcpy(tmp_rule, rule, sizeof(*rule)); + return; + } + } + + memcpy(®_rules[*n_rules], rule, sizeof(*rule)); + (*n_rules)++; +} + +/** + * regdom_intersect - do the intersection between two regulatory domains + * @rd1: first regulatory domain + * @rd2: second regulatory domain + * + * Use this function to get the intersection between two regulatory domains. + * Once completed we will mark the alpha2 for the rd as intersected, "98", + * as no one single alpha2 can represent this regulatory domain. + * + * Returns a pointer to the regulatory domain structure which will hold the + * resulting intersection of rules between rd1 and rd2. We will + * kzalloc() this structure for you. + */ +static struct ieee80211_regdomain * +regdom_intersect(const struct ieee80211_regdomain *rd1, + const struct ieee80211_regdomain *rd2) +{ + int r, size_of_regd; + unsigned int x, y; + unsigned int num_rules = 0; + const struct ieee80211_reg_rule *rule1, *rule2; + struct ieee80211_reg_rule intersected_rule; + struct ieee80211_regdomain *rd; + + if (!rd1 || !rd2) + return NULL; + + /* + * First we get a count of the rules we'll need, then we actually + * build them. This is to so we can malloc() and free() a + * regdomain once. The reason we use reg_rules_intersect() here + * is it will return -EINVAL if the rule computed makes no sense. + * All rules that do check out OK are valid. + */ + + for (x = 0; x < rd1->n_reg_rules; x++) { + rule1 = &rd1->reg_rules[x]; + for (y = 0; y < rd2->n_reg_rules; y++) { + rule2 = &rd2->reg_rules[y]; + if (!reg_rules_intersect(rd1, rd2, rule1, rule2, + &intersected_rule)) + num_rules++; + } + } + + if (!num_rules) + return NULL; + + size_of_regd = sizeof(struct ieee80211_regdomain) + + num_rules * sizeof(struct ieee80211_reg_rule); + + rd = kzalloc(size_of_regd, GFP_KERNEL); + if (!rd) + return NULL; + + for (x = 0; x < rd1->n_reg_rules; x++) { + rule1 = &rd1->reg_rules[x]; + for (y = 0; y < rd2->n_reg_rules; y++) { + rule2 = &rd2->reg_rules[y]; + r = reg_rules_intersect(rd1, rd2, rule1, rule2, + &intersected_rule); + /* + * No need to memset here the intersected rule here as + * we're not using the stack anymore + */ + if (r) + continue; + + add_rule(&intersected_rule, rd->reg_rules, + &rd->n_reg_rules); + } + } + + rd->alpha2[0] = '9'; + rd->alpha2[1] = '8'; + rd->dfs_region = reg_intersect_dfs_region(rd1->dfs_region, + rd2->dfs_region); + + return rd; +} + +/* + * XXX: add support for the rest of enum nl80211_reg_rule_flags, we may + * want to just have the channel structure use these + */ +static u32 map_regdom_flags(u32 rd_flags) +{ + u32 channel_flags = 0; + if (rd_flags & NL80211_RRF_NO_IR_ALL) + channel_flags |= IEEE80211_CHAN_NO_IR; + if (rd_flags & NL80211_RRF_DFS) + channel_flags |= IEEE80211_CHAN_RADAR; + if (rd_flags & NL80211_RRF_NO_OFDM) + channel_flags |= IEEE80211_CHAN_NO_OFDM; + if (rd_flags & NL80211_RRF_NO_OUTDOOR) + channel_flags |= IEEE80211_CHAN_INDOOR_ONLY; + if (rd_flags & NL80211_RRF_GO_CONCURRENT) + channel_flags |= IEEE80211_CHAN_GO_CONCURRENT; + if (rd_flags & NL80211_RRF_NO_HT40MINUS) + channel_flags |= IEEE80211_CHAN_NO_HT40MINUS; + if (rd_flags & NL80211_RRF_NO_HT40PLUS) + channel_flags |= IEEE80211_CHAN_NO_HT40PLUS; + if (rd_flags & NL80211_RRF_NO_80MHZ) + channel_flags |= IEEE80211_CHAN_NO_80MHZ; + if (rd_flags & NL80211_RRF_NO_160MHZ) + channel_flags |= IEEE80211_CHAN_NO_160MHZ; + return channel_flags; +} + +static const struct ieee80211_reg_rule * +freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq, + const struct ieee80211_regdomain *regd) +{ + int i; + bool band_rule_found = false; + bool bw_fits = false; + + if (!regd) + return ERR_PTR(-EINVAL); + + for (i = 0; i < regd->n_reg_rules; i++) { + const struct ieee80211_reg_rule *rr; + const struct ieee80211_freq_range *fr = NULL; + + rr = ®d->reg_rules[i]; + fr = &rr->freq_range; + + /* + * We only need to know if one frequency rule was + * was in center_freq's band, that's enough, so lets + * not overwrite it once found + */ + if (!band_rule_found) + band_rule_found = freq_in_rule_band(fr, center_freq); + + bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20)); + + if (band_rule_found && bw_fits) + return rr; + } + + if (!band_rule_found) + return ERR_PTR(-ERANGE); + + return ERR_PTR(-EINVAL); +} + +const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy, + u32 center_freq) +{ + const struct ieee80211_regdomain *regd; + + regd = reg_get_regdomain(wiphy); + + return freq_reg_info_regd(wiphy, center_freq, regd); +} +EXPORT_SYMBOL(freq_reg_info); + +const char *reg_initiator_name(enum nl80211_reg_initiator initiator) +{ + switch (initiator) { + case NL80211_REGDOM_SET_BY_CORE: + return "core"; + case NL80211_REGDOM_SET_BY_USER: + return "user"; + case NL80211_REGDOM_SET_BY_DRIVER: + return "driver"; + case NL80211_REGDOM_SET_BY_COUNTRY_IE: + return "country IE"; + default: + WARN_ON(1); + return "bug"; + } +} +EXPORT_SYMBOL(reg_initiator_name); + +#ifdef CONFIG_CFG80211_REG_DEBUG +static void chan_reg_rule_print_dbg(const struct ieee80211_regdomain *regd, + struct ieee80211_channel *chan, + const struct ieee80211_reg_rule *reg_rule) +{ + const struct ieee80211_power_rule *power_rule; + const struct ieee80211_freq_range *freq_range; + char max_antenna_gain[32], bw[32]; + + power_rule = ®_rule->power_rule; + freq_range = ®_rule->freq_range; + + if (!power_rule->max_antenna_gain) + snprintf(max_antenna_gain, sizeof(max_antenna_gain), "N/A"); + else + snprintf(max_antenna_gain, sizeof(max_antenna_gain), "%d", + power_rule->max_antenna_gain); + + if (reg_rule->flags & NL80211_RRF_AUTO_BW) + snprintf(bw, sizeof(bw), "%d KHz, %d KHz AUTO", + freq_range->max_bandwidth_khz, + reg_get_max_bandwidth(regd, reg_rule)); + else + snprintf(bw, sizeof(bw), "%d KHz", + freq_range->max_bandwidth_khz); + + REG_DBG_PRINT("Updating information on frequency %d MHz with regulatory rule:\n", + chan->center_freq); + + REG_DBG_PRINT("%d KHz - %d KHz @ %s), (%s mBi, %d mBm)\n", + freq_range->start_freq_khz, freq_range->end_freq_khz, + bw, max_antenna_gain, + power_rule->max_eirp); +} +#else +static void chan_reg_rule_print_dbg(const struct ieee80211_regdomain *regd, + struct ieee80211_channel *chan, + const struct ieee80211_reg_rule *reg_rule) +{ + return; +} +#endif + +/* + * Note that right now we assume the desired channel bandwidth + * is always 20 MHz for each individual channel (HT40 uses 20 MHz + * per channel, the primary and the extension channel). + */ +static void handle_channel(struct wiphy *wiphy, + enum nl80211_reg_initiator initiator, + struct ieee80211_channel *chan) +{ + u32 flags, bw_flags = 0; + const struct ieee80211_reg_rule *reg_rule = NULL; + const struct ieee80211_power_rule *power_rule = NULL; + const struct ieee80211_freq_range *freq_range = NULL; + struct wiphy *request_wiphy = NULL; + struct regulatory_request *lr = get_last_request(); + const struct ieee80211_regdomain *regd; + u32 max_bandwidth_khz; + + request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); + + flags = chan->orig_flags; + + reg_rule = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq)); + if (IS_ERR(reg_rule)) { + /* + * We will disable all channels that do not match our + * received regulatory rule unless the hint is coming + * from a Country IE and the Country IE had no information + * about a band. The IEEE 802.11 spec allows for an AP + * to send only a subset of the regulatory rules allowed, + * so an AP in the US that only supports 2.4 GHz may only send + * a country IE with information for the 2.4 GHz band + * while 5 GHz is still supported. + */ + if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && + PTR_ERR(reg_rule) == -ERANGE) + return; + + if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && + request_wiphy && request_wiphy == wiphy && + request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) { + REG_DBG_PRINT("Disabling freq %d MHz for good\n", + chan->center_freq); + chan->orig_flags |= IEEE80211_CHAN_DISABLED; + chan->flags = chan->orig_flags; + } else { + REG_DBG_PRINT("Disabling freq %d MHz\n", + chan->center_freq); + chan->flags |= IEEE80211_CHAN_DISABLED; + } + return; + } + + regd = reg_get_regdomain(wiphy); + chan_reg_rule_print_dbg(regd, chan, reg_rule); + + power_rule = ®_rule->power_rule; + freq_range = ®_rule->freq_range; + + max_bandwidth_khz = freq_range->max_bandwidth_khz; + /* Check if auto calculation requested */ + if (reg_rule->flags & NL80211_RRF_AUTO_BW) + max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule); + + if (max_bandwidth_khz < MHZ_TO_KHZ(40)) + bw_flags = IEEE80211_CHAN_NO_HT40; + if (max_bandwidth_khz < MHZ_TO_KHZ(80)) + bw_flags |= IEEE80211_CHAN_NO_80MHZ; + if (max_bandwidth_khz < MHZ_TO_KHZ(160)) + bw_flags |= IEEE80211_CHAN_NO_160MHZ; + + if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && + request_wiphy && request_wiphy == wiphy && + request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) { + /* + * This guarantees the driver's requested regulatory domain + * will always be used as a base for further regulatory + * settings + */ + chan->flags = chan->orig_flags = + map_regdom_flags(reg_rule->flags) | bw_flags; + chan->max_antenna_gain = chan->orig_mag = + (int) MBI_TO_DBI(power_rule->max_antenna_gain); + chan->max_reg_power = chan->max_power = chan->orig_mpwr = + (int) MBM_TO_DBM(power_rule->max_eirp); + + if (chan->flags & IEEE80211_CHAN_RADAR) { + chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS; + if (reg_rule->dfs_cac_ms) + chan->dfs_cac_ms = reg_rule->dfs_cac_ms; + } + + return; + } + + chan->dfs_state = NL80211_DFS_USABLE; + chan->dfs_state_entered = jiffies; + + chan->beacon_found = false; + chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags); + chan->max_antenna_gain = + min_t(int, chan->orig_mag, + MBI_TO_DBI(power_rule->max_antenna_gain)); + chan->max_reg_power = (int) MBM_TO_DBM(power_rule->max_eirp); + + if (chan->flags & IEEE80211_CHAN_RADAR) { + if (reg_rule->dfs_cac_ms) + chan->dfs_cac_ms = reg_rule->dfs_cac_ms; + else + chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS; + } + + if (chan->orig_mpwr) { + /* + * Devices that use REGULATORY_COUNTRY_IE_FOLLOW_POWER + * will always follow the passed country IE power settings. + */ + if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && + wiphy->regulatory_flags & REGULATORY_COUNTRY_IE_FOLLOW_POWER) + chan->max_power = chan->max_reg_power; + else + chan->max_power = min(chan->orig_mpwr, + chan->max_reg_power); + } else + chan->max_power = chan->max_reg_power; +} + +static void handle_band(struct wiphy *wiphy, + enum nl80211_reg_initiator initiator, + struct ieee80211_supported_band *sband) +{ + unsigned int i; + + if (!sband) + return; + + for (i = 0; i < sband->n_channels; i++) + handle_channel(wiphy, initiator, &sband->channels[i]); +} + +static bool reg_request_cell_base(struct regulatory_request *request) +{ + if (request->initiator != NL80211_REGDOM_SET_BY_USER) + return false; + return request->user_reg_hint_type == NL80211_USER_REG_HINT_CELL_BASE; +} + +bool reg_last_request_cell_base(void) +{ + return reg_request_cell_base(get_last_request()); +} + +#ifdef CONFIG_CFG80211_REG_CELLULAR_HINTS +/* Core specific check */ +static enum reg_request_treatment +reg_ignore_cell_hint(struct regulatory_request *pending_request) +{ + struct regulatory_request *lr = get_last_request(); + + if (!reg_num_devs_support_basehint) + return REG_REQ_IGNORE; + + if (reg_request_cell_base(lr) && + !regdom_changes(pending_request->alpha2)) + return REG_REQ_ALREADY_SET; + + return REG_REQ_OK; +} + +/* Device specific check */ +static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy) +{ + return !(wiphy->features & NL80211_FEATURE_CELL_BASE_REG_HINTS); +} +#else +static int reg_ignore_cell_hint(struct regulatory_request *pending_request) +{ + return REG_REQ_IGNORE; +} + +static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy) +{ + return true; +} +#endif + +static bool wiphy_strict_alpha2_regd(struct wiphy *wiphy) +{ + if (wiphy->regulatory_flags & REGULATORY_STRICT_REG && + !(wiphy->regulatory_flags & REGULATORY_CUSTOM_REG)) + return true; + return false; +} + +static bool ignore_reg_update(struct wiphy *wiphy, + enum nl80211_reg_initiator initiator) +{ + struct regulatory_request *lr = get_last_request(); + + if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) + return true; + + if (!lr) { + REG_DBG_PRINT("Ignoring regulatory request set by %s " + "since last_request is not set\n", + reg_initiator_name(initiator)); + return true; + } + + if (initiator == NL80211_REGDOM_SET_BY_CORE && + wiphy->regulatory_flags & REGULATORY_CUSTOM_REG) { + REG_DBG_PRINT("Ignoring regulatory request set by %s " + "since the driver uses its own custom " + "regulatory domain\n", + reg_initiator_name(initiator)); + return true; + } + + /* + * wiphy->regd will be set once the device has its own + * desired regulatory domain set + */ + if (wiphy_strict_alpha2_regd(wiphy) && !wiphy->regd && + initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && + !is_world_regdom(lr->alpha2)) { + REG_DBG_PRINT("Ignoring regulatory request set by %s " + "since the driver requires its own regulatory " + "domain to be set first\n", + reg_initiator_name(initiator)); + return true; + } + + if (reg_request_cell_base(lr)) + return reg_dev_ignore_cell_hint(wiphy); + + return false; +} + +static bool reg_is_world_roaming(struct wiphy *wiphy) +{ + const struct ieee80211_regdomain *cr = get_cfg80211_regdom(); + const struct ieee80211_regdomain *wr = get_wiphy_regdom(wiphy); + struct regulatory_request *lr = get_last_request(); + + if (is_world_regdom(cr->alpha2) || (wr && is_world_regdom(wr->alpha2))) + return true; + + if (lr && lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && + wiphy->regulatory_flags & REGULATORY_CUSTOM_REG) + return true; + + return false; +} + +static void handle_reg_beacon(struct wiphy *wiphy, unsigned int chan_idx, + struct reg_beacon *reg_beacon) +{ + struct ieee80211_supported_band *sband; + struct ieee80211_channel *chan; + bool channel_changed = false; + struct ieee80211_channel chan_before; + + sband = wiphy->bands[reg_beacon->chan.band]; + chan = &sband->channels[chan_idx]; + + if (likely(chan->center_freq != reg_beacon->chan.center_freq)) + return; + + if (chan->beacon_found) + return; + + chan->beacon_found = true; + + if (!reg_is_world_roaming(wiphy)) + return; + + if (wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS) + return; + + chan_before.center_freq = chan->center_freq; + chan_before.flags = chan->flags; + + if (chan->flags & IEEE80211_CHAN_NO_IR) { + chan->flags &= ~IEEE80211_CHAN_NO_IR; + channel_changed = true; + } + + if (channel_changed) + nl80211_send_beacon_hint_event(wiphy, &chan_before, chan); +} + +/* + * Called when a scan on a wiphy finds a beacon on + * new channel + */ +static void wiphy_update_new_beacon(struct wiphy *wiphy, + struct reg_beacon *reg_beacon) +{ + unsigned int i; + struct ieee80211_supported_band *sband; + + if (!wiphy->bands[reg_beacon->chan.band]) + return; + + sband = wiphy->bands[reg_beacon->chan.band]; + + for (i = 0; i < sband->n_channels; i++) + handle_reg_beacon(wiphy, i, reg_beacon); +} + +/* + * Called upon reg changes or a new wiphy is added + */ +static void wiphy_update_beacon_reg(struct wiphy *wiphy) +{ + unsigned int i; + struct ieee80211_supported_band *sband; + struct reg_beacon *reg_beacon; + + list_for_each_entry(reg_beacon, ®_beacon_list, list) { + if (!wiphy->bands[reg_beacon->chan.band]) + continue; + sband = wiphy->bands[reg_beacon->chan.band]; + for (i = 0; i < sband->n_channels; i++) + handle_reg_beacon(wiphy, i, reg_beacon); + } +} + +/* Reap the advantages of previously found beacons */ +static void reg_process_beacons(struct wiphy *wiphy) +{ + /* + * Means we are just firing up cfg80211, so no beacons would + * have been processed yet. + */ + if (!last_request) + return; + wiphy_update_beacon_reg(wiphy); +} + +static bool is_ht40_allowed(struct ieee80211_channel *chan) +{ + if (!chan) + return false; + if (chan->flags & IEEE80211_CHAN_DISABLED) + return false; + /* This would happen when regulatory rules disallow HT40 completely */ + if ((chan->flags & IEEE80211_CHAN_NO_HT40) == IEEE80211_CHAN_NO_HT40) + return false; + return true; +} + +static void reg_process_ht_flags_channel(struct wiphy *wiphy, + struct ieee80211_channel *channel) +{ + struct ieee80211_supported_band *sband = wiphy->bands[channel->band]; + struct ieee80211_channel *channel_before = NULL, *channel_after = NULL; + unsigned int i; + + if (!is_ht40_allowed(channel)) { + channel->flags |= IEEE80211_CHAN_NO_HT40; + return; + } + + /* + * We need to ensure the extension channels exist to + * be able to use HT40- or HT40+, this finds them (or not) + */ + for (i = 0; i < sband->n_channels; i++) { + struct ieee80211_channel *c = &sband->channels[i]; + + if (c->center_freq == (channel->center_freq - 20)) + channel_before = c; + if (c->center_freq == (channel->center_freq + 20)) + channel_after = c; + } + + /* + * Please note that this assumes target bandwidth is 20 MHz, + * if that ever changes we also need to change the below logic + * to include that as well. + */ + if (!is_ht40_allowed(channel_before)) + channel->flags |= IEEE80211_CHAN_NO_HT40MINUS; + else + channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS; + + if (!is_ht40_allowed(channel_after)) + channel->flags |= IEEE80211_CHAN_NO_HT40PLUS; + else + channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS; +} + +static void reg_process_ht_flags_band(struct wiphy *wiphy, + struct ieee80211_supported_band *sband) +{ + unsigned int i; + + if (!sband) + return; + + for (i = 0; i < sband->n_channels; i++) + reg_process_ht_flags_channel(wiphy, &sband->channels[i]); +} + +static void reg_process_ht_flags(struct wiphy *wiphy) +{ + enum ieee80211_band band; + + if (!wiphy) + return; + + for (band = 0; band < IEEE80211_NUM_BANDS; band++) + reg_process_ht_flags_band(wiphy, wiphy->bands[band]); +} + +static void reg_call_notifier(struct wiphy *wiphy, + struct regulatory_request *request) +{ + if (wiphy->reg_notifier) + wiphy->reg_notifier(wiphy, request); +} + +static bool reg_wdev_chan_valid(struct wiphy *wiphy, struct wireless_dev *wdev) +{ + struct cfg80211_chan_def chandef; + struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); + enum nl80211_iftype iftype; + + wdev_lock(wdev); + iftype = wdev->iftype; + + /* make sure the interface is active */ + if (!wdev->netdev || !netif_running(wdev->netdev)) + goto wdev_inactive_unlock; + + switch (iftype) { + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_P2P_GO: + if (!wdev->beacon_interval) + goto wdev_inactive_unlock; + chandef = wdev->chandef; + break; + case NL80211_IFTYPE_ADHOC: + if (!wdev->ssid_len) + goto wdev_inactive_unlock; + chandef = wdev->chandef; + break; + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_P2P_CLIENT: + if (!wdev->current_bss || + !wdev->current_bss->pub.channel) + goto wdev_inactive_unlock; + + if (!rdev->ops->get_channel || + rdev_get_channel(rdev, wdev, &chandef)) + cfg80211_chandef_create(&chandef, + wdev->current_bss->pub.channel, + NL80211_CHAN_NO_HT); + break; + case NL80211_IFTYPE_MONITOR: + case NL80211_IFTYPE_AP_VLAN: + case NL80211_IFTYPE_P2P_DEVICE: + /* no enforcement required */ + break; + default: + /* others not implemented for now */ + WARN_ON(1); + break; + } + + wdev_unlock(wdev); + + switch (iftype) { + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_P2P_GO: + case NL80211_IFTYPE_ADHOC: + return cfg80211_reg_can_beacon(wiphy, &chandef, iftype); + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_P2P_CLIENT: + return cfg80211_chandef_usable(wiphy, &chandef, + IEEE80211_CHAN_DISABLED); + default: + break; + } + + return true; + +wdev_inactive_unlock: + wdev_unlock(wdev); + return true; +} + +static void reg_leave_invalid_chans(struct wiphy *wiphy) +{ + struct wireless_dev *wdev; + struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); + + ASSERT_RTNL(); + + list_for_each_entry(wdev, &rdev->wdev_list, list) + if (!reg_wdev_chan_valid(wiphy, wdev)) + cfg80211_leave(rdev, wdev); +} + +static void reg_check_chans_work(struct work_struct *work) +{ + struct cfg80211_registered_device *rdev; + + REG_DBG_PRINT("Verifying active interfaces after reg change\n"); + rtnl_lock(); + + list_for_each_entry(rdev, &cfg80211_rdev_list, list) + if (!(rdev->wiphy.regulatory_flags & + REGULATORY_IGNORE_STALE_KICKOFF)) + reg_leave_invalid_chans(&rdev->wiphy); + + rtnl_unlock(); +} + +static void reg_check_channels(void) +{ + /* + * Give usermode a chance to do something nicer (move to another + * channel, orderly disconnection), before forcing a disconnection. + */ + mod_delayed_work(system_power_efficient_wq, + ®_check_chans, + msecs_to_jiffies(REG_ENFORCE_GRACE_MS)); +} + +static void wiphy_update_regulatory(struct wiphy *wiphy, + enum nl80211_reg_initiator initiator) +{ + enum ieee80211_band band; + struct regulatory_request *lr = get_last_request(); + + if (ignore_reg_update(wiphy, initiator)) { + /* + * Regulatory updates set by CORE are ignored for custom + * regulatory cards. Let us notify the changes to the driver, + * as some drivers used this to restore its orig_* reg domain. + */ + if (initiator == NL80211_REGDOM_SET_BY_CORE && + wiphy->regulatory_flags & REGULATORY_CUSTOM_REG) + reg_call_notifier(wiphy, lr); + return; + } + + lr->dfs_region = get_cfg80211_regdom()->dfs_region; + + for (band = 0; band < IEEE80211_NUM_BANDS; band++) + handle_band(wiphy, initiator, wiphy->bands[band]); + + reg_process_beacons(wiphy); + reg_process_ht_flags(wiphy); + reg_call_notifier(wiphy, lr); +} + +static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator) +{ + struct cfg80211_registered_device *rdev; + struct wiphy *wiphy; + + ASSERT_RTNL(); + + list_for_each_entry(rdev, &cfg80211_rdev_list, list) { + wiphy = &rdev->wiphy; + wiphy_update_regulatory(wiphy, initiator); + } + + reg_check_channels(); +} + +static void handle_channel_custom(struct wiphy *wiphy, + struct ieee80211_channel *chan, + const struct ieee80211_regdomain *regd) +{ + u32 bw_flags = 0; + const struct ieee80211_reg_rule *reg_rule = NULL; + const struct ieee80211_power_rule *power_rule = NULL; + const struct ieee80211_freq_range *freq_range = NULL; + u32 max_bandwidth_khz; + + reg_rule = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq), + regd); + + if (IS_ERR(reg_rule)) { + REG_DBG_PRINT("Disabling freq %d MHz as custom regd has no rule that fits it\n", + chan->center_freq); + if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) { + chan->flags |= IEEE80211_CHAN_DISABLED; + } else { + chan->orig_flags |= IEEE80211_CHAN_DISABLED; + chan->flags = chan->orig_flags; + } + return; + } + + chan_reg_rule_print_dbg(regd, chan, reg_rule); + + power_rule = ®_rule->power_rule; + freq_range = ®_rule->freq_range; + + max_bandwidth_khz = freq_range->max_bandwidth_khz; + /* Check if auto calculation requested */ + if (reg_rule->flags & NL80211_RRF_AUTO_BW) + max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule); + + if (max_bandwidth_khz < MHZ_TO_KHZ(40)) + bw_flags = IEEE80211_CHAN_NO_HT40; + if (max_bandwidth_khz < MHZ_TO_KHZ(80)) + bw_flags |= IEEE80211_CHAN_NO_80MHZ; + if (max_bandwidth_khz < MHZ_TO_KHZ(160)) + bw_flags |= IEEE80211_CHAN_NO_160MHZ; + + chan->dfs_state_entered = jiffies; + chan->dfs_state = NL80211_DFS_USABLE; + + chan->beacon_found = false; + + if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) + chan->flags = chan->orig_flags | bw_flags | + map_regdom_flags(reg_rule->flags); + else + chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags; + + chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain); + chan->max_reg_power = chan->max_power = + (int) MBM_TO_DBM(power_rule->max_eirp); + + if (chan->flags & IEEE80211_CHAN_RADAR) { + if (reg_rule->dfs_cac_ms) + chan->dfs_cac_ms = reg_rule->dfs_cac_ms; + else + chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS; + } + + chan->max_power = chan->max_reg_power; +} + +static void handle_band_custom(struct wiphy *wiphy, + struct ieee80211_supported_band *sband, + const struct ieee80211_regdomain *regd) +{ + unsigned int i; + + if (!sband) + return; + + for (i = 0; i < sband->n_channels; i++) + handle_channel_custom(wiphy, &sband->channels[i], regd); +} + +/* Used by drivers prior to wiphy registration */ +void wiphy_apply_custom_regulatory(struct wiphy *wiphy, + const struct ieee80211_regdomain *regd) +{ + enum ieee80211_band band; + unsigned int bands_set = 0; + + WARN(!(wiphy->regulatory_flags & REGULATORY_CUSTOM_REG), + "wiphy should have REGULATORY_CUSTOM_REG\n"); + wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG; + + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + if (!wiphy->bands[band]) + continue; + handle_band_custom(wiphy, wiphy->bands[band], regd); + bands_set++; + } + + /* + * no point in calling this if it won't have any effect + * on your device's supported bands. + */ + WARN_ON(!bands_set); +} +EXPORT_SYMBOL(wiphy_apply_custom_regulatory); + +static void reg_set_request_processed(void) +{ + bool need_more_processing = false; + struct regulatory_request *lr = get_last_request(); + + lr->processed = true; + + spin_lock(®_requests_lock); + if (!list_empty(®_requests_list)) + need_more_processing = true; + spin_unlock(®_requests_lock); + + cancel_delayed_work(®_timeout); + + if (need_more_processing) + schedule_work(®_work); +} + +/** + * reg_process_hint_core - process core regulatory requests + * @pending_request: a pending core regulatory request + * + * The wireless subsystem can use this function to process + * a regulatory request issued by the regulatory core. + * + * Returns one of the different reg request treatment values. + */ +static enum reg_request_treatment +reg_process_hint_core(struct regulatory_request *core_request) +{ + + core_request->intersect = false; + core_request->processed = false; + + reg_update_last_request(core_request); + + return reg_call_crda(core_request); +} + +static enum reg_request_treatment +__reg_process_hint_user(struct regulatory_request *user_request) +{ + struct regulatory_request *lr = get_last_request(); + + if (reg_request_cell_base(user_request)) + return reg_ignore_cell_hint(user_request); + + if (reg_request_cell_base(lr)) + return REG_REQ_IGNORE; + + if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) + return REG_REQ_INTERSECT; + /* + * If the user knows better the user should set the regdom + * to their country before the IE is picked up + */ + if (lr->initiator == NL80211_REGDOM_SET_BY_USER && + lr->intersect) + return REG_REQ_IGNORE; + /* + * Process user requests only after previous user/driver/core + * requests have been processed + */ + if ((lr->initiator == NL80211_REGDOM_SET_BY_CORE || + lr->initiator == NL80211_REGDOM_SET_BY_DRIVER || + lr->initiator == NL80211_REGDOM_SET_BY_USER) && + regdom_changes(lr->alpha2)) + return REG_REQ_IGNORE; + + if (!regdom_changes(user_request->alpha2)) + return REG_REQ_ALREADY_SET; + + return REG_REQ_OK; +} + +/** + * reg_process_hint_user - process user regulatory requests + * @user_request: a pending user regulatory request + * + * The wireless subsystem can use this function to process + * a regulatory request initiated by userspace. + * + * Returns one of the different reg request treatment values. + */ +static enum reg_request_treatment +reg_process_hint_user(struct regulatory_request *user_request) +{ + enum reg_request_treatment treatment; + + treatment = __reg_process_hint_user(user_request); + if (treatment == REG_REQ_IGNORE || + treatment == REG_REQ_ALREADY_SET) { + reg_free_request(user_request); + return treatment; + } + + user_request->intersect = treatment == REG_REQ_INTERSECT; + user_request->processed = false; + + reg_update_last_request(user_request); + + user_alpha2[0] = user_request->alpha2[0]; + user_alpha2[1] = user_request->alpha2[1]; + + return reg_call_crda(user_request); +} + +static enum reg_request_treatment +__reg_process_hint_driver(struct regulatory_request *driver_request) +{ + struct regulatory_request *lr = get_last_request(); + + if (lr->initiator == NL80211_REGDOM_SET_BY_CORE) { + if (regdom_changes(driver_request->alpha2)) + return REG_REQ_OK; + return REG_REQ_ALREADY_SET; + } + + /* + * This would happen if you unplug and plug your card + * back in or if you add a new device for which the previously + * loaded card also agrees on the regulatory domain. + */ + if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && + !regdom_changes(driver_request->alpha2)) + return REG_REQ_ALREADY_SET; + + return REG_REQ_INTERSECT; +} + +/** + * reg_process_hint_driver - process driver regulatory requests + * @driver_request: a pending driver regulatory request + * + * The wireless subsystem can use this function to process + * a regulatory request issued by an 802.11 driver. + * + * Returns one of the different reg request treatment values. + */ +static enum reg_request_treatment +reg_process_hint_driver(struct wiphy *wiphy, + struct regulatory_request *driver_request) +{ + const struct ieee80211_regdomain *regd, *tmp; + enum reg_request_treatment treatment; + + treatment = __reg_process_hint_driver(driver_request); + + switch (treatment) { + case REG_REQ_OK: + break; + case REG_REQ_IGNORE: + reg_free_request(driver_request); + return treatment; + case REG_REQ_INTERSECT: + /* fall through */ + case REG_REQ_ALREADY_SET: + regd = reg_copy_regd(get_cfg80211_regdom()); + if (IS_ERR(regd)) { + reg_free_request(driver_request); + return REG_REQ_IGNORE; + } + + tmp = get_wiphy_regdom(wiphy); + rcu_assign_pointer(wiphy->regd, regd); + rcu_free_regdom(tmp); + } + + + driver_request->intersect = treatment == REG_REQ_INTERSECT; + driver_request->processed = false; + + reg_update_last_request(driver_request); + + /* + * Since CRDA will not be called in this case as we already + * have applied the requested regulatory domain before we just + * inform userspace we have processed the request + */ + if (treatment == REG_REQ_ALREADY_SET) { + nl80211_send_reg_change_event(driver_request); + reg_set_request_processed(); + return treatment; + } + + return reg_call_crda(driver_request); +} + +static enum reg_request_treatment +__reg_process_hint_country_ie(struct wiphy *wiphy, + struct regulatory_request *country_ie_request) +{ + struct wiphy *last_wiphy = NULL; + struct regulatory_request *lr = get_last_request(); + + if (reg_request_cell_base(lr)) { + /* Trust a Cell base station over the AP's country IE */ + if (regdom_changes(country_ie_request->alpha2)) + return REG_REQ_IGNORE; + return REG_REQ_ALREADY_SET; + } else { + if (wiphy->regulatory_flags & REGULATORY_COUNTRY_IE_IGNORE) + return REG_REQ_IGNORE; + } + + if (unlikely(!is_an_alpha2(country_ie_request->alpha2))) + return -EINVAL; + + if (lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) + return REG_REQ_OK; + + last_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); + + if (last_wiphy != wiphy) { + /* + * Two cards with two APs claiming different + * Country IE alpha2s. We could + * intersect them, but that seems unlikely + * to be correct. Reject second one for now. + */ + if (regdom_changes(country_ie_request->alpha2)) + return REG_REQ_IGNORE; + return REG_REQ_ALREADY_SET; + } + + if (regdom_changes(country_ie_request->alpha2)) + return REG_REQ_OK; + return REG_REQ_ALREADY_SET; +} + +/** + * reg_process_hint_country_ie - process regulatory requests from country IEs + * @country_ie_request: a regulatory request from a country IE + * + * The wireless subsystem can use this function to process + * a regulatory request issued by a country Information Element. + * + * Returns one of the different reg request treatment values. + */ +static enum reg_request_treatment +reg_process_hint_country_ie(struct wiphy *wiphy, + struct regulatory_request *country_ie_request) +{ + enum reg_request_treatment treatment; + + treatment = __reg_process_hint_country_ie(wiphy, country_ie_request); + + switch (treatment) { + case REG_REQ_OK: + break; + case REG_REQ_IGNORE: + /* fall through */ + case REG_REQ_ALREADY_SET: + reg_free_request(country_ie_request); + return treatment; + case REG_REQ_INTERSECT: + reg_free_request(country_ie_request); + /* + * This doesn't happen yet, not sure we + * ever want to support it for this case. + */ + WARN_ONCE(1, "Unexpected intersection for country IEs"); + return REG_REQ_IGNORE; + } + + country_ie_request->intersect = false; + country_ie_request->processed = false; + + reg_update_last_request(country_ie_request); + + return reg_call_crda(country_ie_request); +} + +/* This processes *all* regulatory hints */ +static void reg_process_hint(struct regulatory_request *reg_request) +{ + struct wiphy *wiphy = NULL; + enum reg_request_treatment treatment; + + if (reg_request->wiphy_idx != WIPHY_IDX_INVALID) + wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx); + + switch (reg_request->initiator) { + case NL80211_REGDOM_SET_BY_CORE: + reg_process_hint_core(reg_request); + return; + case NL80211_REGDOM_SET_BY_USER: + treatment = reg_process_hint_user(reg_request); + if (treatment == REG_REQ_IGNORE || + treatment == REG_REQ_ALREADY_SET) + return; + return; + case NL80211_REGDOM_SET_BY_DRIVER: + if (!wiphy) + goto out_free; + treatment = reg_process_hint_driver(wiphy, reg_request); + break; + case NL80211_REGDOM_SET_BY_COUNTRY_IE: + if (!wiphy) + goto out_free; + treatment = reg_process_hint_country_ie(wiphy, reg_request); + break; + default: + WARN(1, "invalid initiator %d\n", reg_request->initiator); + goto out_free; + } + + /* This is required so that the orig_* parameters are saved */ + if (treatment == REG_REQ_ALREADY_SET && wiphy && + wiphy->regulatory_flags & REGULATORY_STRICT_REG) { + wiphy_update_regulatory(wiphy, reg_request->initiator); + reg_check_channels(); + } + + return; + +out_free: + reg_free_request(reg_request); +} + +static bool reg_only_self_managed_wiphys(void) +{ + struct cfg80211_registered_device *rdev; + struct wiphy *wiphy; + bool self_managed_found = false; + + ASSERT_RTNL(); + + list_for_each_entry(rdev, &cfg80211_rdev_list, list) { + wiphy = &rdev->wiphy; + if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) + self_managed_found = true; + else + return false; + } + + /* make sure at least one self-managed wiphy exists */ + return self_managed_found; +} + +/* + * Processes regulatory hints, this is all the NL80211_REGDOM_SET_BY_* + * Regulatory hints come on a first come first serve basis and we + * must process each one atomically. + */ +static void reg_process_pending_hints(void) +{ + struct regulatory_request *reg_request, *lr; + + lr = get_last_request(); + + /* When last_request->processed becomes true this will be rescheduled */ + if (lr && !lr->processed) { + reg_process_hint(lr); + return; + } + + spin_lock(®_requests_lock); + + if (list_empty(®_requests_list)) { + spin_unlock(®_requests_lock); + return; + } + + reg_request = list_first_entry(®_requests_list, + struct regulatory_request, + list); + list_del_init(®_request->list); + + spin_unlock(®_requests_lock); + + if (reg_only_self_managed_wiphys()) { + reg_free_request(reg_request); + return; + } + + reg_process_hint(reg_request); + + lr = get_last_request(); + + spin_lock(®_requests_lock); + if (!list_empty(®_requests_list) && lr && lr->processed) + schedule_work(®_work); + spin_unlock(®_requests_lock); +} + +/* Processes beacon hints -- this has nothing to do with country IEs */ +static void reg_process_pending_beacon_hints(void) +{ + struct cfg80211_registered_device *rdev; + struct reg_beacon *pending_beacon, *tmp; + + /* This goes through the _pending_ beacon list */ + spin_lock_bh(®_pending_beacons_lock); + + list_for_each_entry_safe(pending_beacon, tmp, + ®_pending_beacons, list) { + list_del_init(&pending_beacon->list); + + /* Applies the beacon hint to current wiphys */ + list_for_each_entry(rdev, &cfg80211_rdev_list, list) + wiphy_update_new_beacon(&rdev->wiphy, pending_beacon); + + /* Remembers the beacon hint for new wiphys or reg changes */ + list_add_tail(&pending_beacon->list, ®_beacon_list); + } + + spin_unlock_bh(®_pending_beacons_lock); +} + +static void reg_process_self_managed_hints(void) +{ + struct cfg80211_registered_device *rdev; + struct wiphy *wiphy; + const struct ieee80211_regdomain *tmp; + const struct ieee80211_regdomain *regd; + enum ieee80211_band band; + struct regulatory_request request = {}; + + list_for_each_entry(rdev, &cfg80211_rdev_list, list) { + wiphy = &rdev->wiphy; + + spin_lock(®_requests_lock); + regd = rdev->requested_regd; + rdev->requested_regd = NULL; + spin_unlock(®_requests_lock); + + if (regd == NULL) + continue; + + tmp = get_wiphy_regdom(wiphy); + rcu_assign_pointer(wiphy->regd, regd); + rcu_free_regdom(tmp); + + for (band = 0; band < IEEE80211_NUM_BANDS; band++) + handle_band_custom(wiphy, wiphy->bands[band], regd); + + reg_process_ht_flags(wiphy); + + request.wiphy_idx = get_wiphy_idx(wiphy); + request.alpha2[0] = regd->alpha2[0]; + request.alpha2[1] = regd->alpha2[1]; + request.initiator = NL80211_REGDOM_SET_BY_DRIVER; + + nl80211_send_wiphy_reg_change_event(&request); + } + + reg_check_channels(); +} + +static void reg_todo(struct work_struct *work) +{ + rtnl_lock(); + reg_process_pending_hints(); + reg_process_pending_beacon_hints(); + reg_process_self_managed_hints(); + rtnl_unlock(); +} + +static void queue_regulatory_request(struct regulatory_request *request) +{ + request->alpha2[0] = toupper(request->alpha2[0]); + request->alpha2[1] = toupper(request->alpha2[1]); + + spin_lock(®_requests_lock); + list_add_tail(&request->list, ®_requests_list); + spin_unlock(®_requests_lock); + + schedule_work(®_work); +} + +/* + * Core regulatory hint -- happens during cfg80211_init() + * and when we restore regulatory settings. + */ +static int regulatory_hint_core(const char *alpha2) +{ + struct regulatory_request *request; + + request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); + if (!request) + return -ENOMEM; + + request->alpha2[0] = alpha2[0]; + request->alpha2[1] = alpha2[1]; + request->initiator = NL80211_REGDOM_SET_BY_CORE; + + queue_regulatory_request(request); + + return 0; +} + +/* User hints */ +int regulatory_hint_user(const char *alpha2, + enum nl80211_user_reg_hint_type user_reg_hint_type) +{ + struct regulatory_request *request; + + if (WARN_ON(!alpha2)) + return -EINVAL; + + request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); + if (!request) + return -ENOMEM; + + request->wiphy_idx = WIPHY_IDX_INVALID; + request->alpha2[0] = alpha2[0]; + request->alpha2[1] = alpha2[1]; + request->initiator = NL80211_REGDOM_SET_BY_USER; + request->user_reg_hint_type = user_reg_hint_type; + + /* Allow calling CRDA again */ + reg_crda_timeouts = 0; + + queue_regulatory_request(request); + + return 0; +} + +int regulatory_hint_indoor(bool is_indoor, u32 portid) +{ + spin_lock(®_indoor_lock); + + /* It is possible that more than one user space process is trying to + * configure the indoor setting. To handle such cases, clear the indoor + * setting in case that some process does not think that the device + * is operating in an indoor environment. In addition, if a user space + * process indicates that it is controlling the indoor setting, save its + * portid, i.e., make it the owner. + */ + reg_is_indoor = is_indoor; + if (reg_is_indoor) { + if (!reg_is_indoor_portid) + reg_is_indoor_portid = portid; + } else { + reg_is_indoor_portid = 0; + } + + spin_unlock(®_indoor_lock); + + if (!is_indoor) + reg_check_channels(); + + return 0; +} + +void regulatory_netlink_notify(u32 portid) +{ + spin_lock(®_indoor_lock); + + if (reg_is_indoor_portid != portid) { + spin_unlock(®_indoor_lock); + return; + } + + reg_is_indoor = false; + reg_is_indoor_portid = 0; + + spin_unlock(®_indoor_lock); + + reg_check_channels(); +} + +/* Driver hints */ +int regulatory_hint(struct wiphy *wiphy, const char *alpha2) +{ + struct regulatory_request *request; + + if (WARN_ON(!alpha2 || !wiphy)) + return -EINVAL; + + wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG; + + request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); + if (!request) + return -ENOMEM; + + request->wiphy_idx = get_wiphy_idx(wiphy); + + request->alpha2[0] = alpha2[0]; + request->alpha2[1] = alpha2[1]; + request->initiator = NL80211_REGDOM_SET_BY_DRIVER; + + /* Allow calling CRDA again */ + reg_crda_timeouts = 0; + + queue_regulatory_request(request); + + return 0; +} +EXPORT_SYMBOL(regulatory_hint); + +void regulatory_hint_country_ie(struct wiphy *wiphy, enum ieee80211_band band, + const u8 *country_ie, u8 country_ie_len) +{ + char alpha2[2]; + enum environment_cap env = ENVIRON_ANY; + struct regulatory_request *request = NULL, *lr; + + /* IE len must be evenly divisible by 2 */ + if (country_ie_len & 0x01) + return; + + if (country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN) + return; + + request = kzalloc(sizeof(*request), GFP_KERNEL); + if (!request) + return; + + alpha2[0] = country_ie[0]; + alpha2[1] = country_ie[1]; + + if (country_ie[2] == 'I') + env = ENVIRON_INDOOR; + else if (country_ie[2] == 'O') + env = ENVIRON_OUTDOOR; + + rcu_read_lock(); + lr = get_last_request(); + + if (unlikely(!lr)) + goto out; + + /* + * We will run this only upon a successful connection on cfg80211. + * We leave conflict resolution to the workqueue, where can hold + * the RTNL. + */ + if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && + lr->wiphy_idx != WIPHY_IDX_INVALID) + goto out; + + request->wiphy_idx = get_wiphy_idx(wiphy); + request->alpha2[0] = alpha2[0]; + request->alpha2[1] = alpha2[1]; + request->initiator = NL80211_REGDOM_SET_BY_COUNTRY_IE; + request->country_ie_env = env; + + /* Allow calling CRDA again */ + reg_crda_timeouts = 0; + + queue_regulatory_request(request); + request = NULL; +out: + kfree(request); + rcu_read_unlock(); +} + +static void restore_alpha2(char *alpha2, bool reset_user) +{ + /* indicates there is no alpha2 to consider for restoration */ + alpha2[0] = '9'; + alpha2[1] = '7'; + + /* The user setting has precedence over the module parameter */ + if (is_user_regdom_saved()) { + /* Unless we're asked to ignore it and reset it */ + if (reset_user) { + REG_DBG_PRINT("Restoring regulatory settings including user preference\n"); + user_alpha2[0] = '9'; + user_alpha2[1] = '7'; + + /* + * If we're ignoring user settings, we still need to + * check the module parameter to ensure we put things + * back as they were for a full restore. + */ + if (!is_world_regdom(ieee80211_regdom)) { + REG_DBG_PRINT("Keeping preference on module parameter ieee80211_regdom: %c%c\n", + ieee80211_regdom[0], ieee80211_regdom[1]); + alpha2[0] = ieee80211_regdom[0]; + alpha2[1] = ieee80211_regdom[1]; + } + } else { + REG_DBG_PRINT("Restoring regulatory settings while preserving user preference for: %c%c\n", + user_alpha2[0], user_alpha2[1]); + alpha2[0] = user_alpha2[0]; + alpha2[1] = user_alpha2[1]; + } + } else if (!is_world_regdom(ieee80211_regdom)) { + REG_DBG_PRINT("Keeping preference on module parameter ieee80211_regdom: %c%c\n", + ieee80211_regdom[0], ieee80211_regdom[1]); + alpha2[0] = ieee80211_regdom[0]; + alpha2[1] = ieee80211_regdom[1]; + } else + REG_DBG_PRINT("Restoring regulatory settings\n"); +} + +static void restore_custom_reg_settings(struct wiphy *wiphy) +{ + struct ieee80211_supported_band *sband; + enum ieee80211_band band; + struct ieee80211_channel *chan; + int i; + + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + sband = wiphy->bands[band]; + if (!sband) + continue; + for (i = 0; i < sband->n_channels; i++) { + chan = &sband->channels[i]; + chan->flags = chan->orig_flags; + chan->max_antenna_gain = chan->orig_mag; + chan->max_power = chan->orig_mpwr; + chan->beacon_found = false; + } + } +} + +/* + * Restoring regulatory settings involves ingoring any + * possibly stale country IE information and user regulatory + * settings if so desired, this includes any beacon hints + * learned as we could have traveled outside to another country + * after disconnection. To restore regulatory settings we do + * exactly what we did at bootup: + * + * - send a core regulatory hint + * - send a user regulatory hint if applicable + * + * Device drivers that send a regulatory hint for a specific country + * keep their own regulatory domain on wiphy->regd so that does does + * not need to be remembered. + */ +static void restore_regulatory_settings(bool reset_user) +{ + char alpha2[2]; + char world_alpha2[2]; + struct reg_beacon *reg_beacon, *btmp; + LIST_HEAD(tmp_reg_req_list); + struct cfg80211_registered_device *rdev; + + ASSERT_RTNL(); + + /* + * Clear the indoor setting in case that it is not controlled by user + * space, as otherwise there is no guarantee that the device is still + * operating in an indoor environment. + */ + spin_lock(®_indoor_lock); + if (reg_is_indoor && !reg_is_indoor_portid) { + reg_is_indoor = false; + reg_check_channels(); + } + spin_unlock(®_indoor_lock); + + reset_regdomains(true, &world_regdom); + restore_alpha2(alpha2, reset_user); + + /* + * If there's any pending requests we simply + * stash them to a temporary pending queue and + * add then after we've restored regulatory + * settings. + */ + spin_lock(®_requests_lock); + list_splice_tail_init(®_requests_list, &tmp_reg_req_list); + spin_unlock(®_requests_lock); + + /* Clear beacon hints */ + spin_lock_bh(®_pending_beacons_lock); + list_for_each_entry_safe(reg_beacon, btmp, ®_pending_beacons, list) { + list_del(®_beacon->list); + kfree(reg_beacon); + } + spin_unlock_bh(®_pending_beacons_lock); + + list_for_each_entry_safe(reg_beacon, btmp, ®_beacon_list, list) { + list_del(®_beacon->list); + kfree(reg_beacon); + } + + /* First restore to the basic regulatory settings */ + world_alpha2[0] = cfg80211_world_regdom->alpha2[0]; + world_alpha2[1] = cfg80211_world_regdom->alpha2[1]; + + list_for_each_entry(rdev, &cfg80211_rdev_list, list) { + if (rdev->wiphy.regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) + continue; + if (rdev->wiphy.regulatory_flags & REGULATORY_CUSTOM_REG) + restore_custom_reg_settings(&rdev->wiphy); + } + + regulatory_hint_core(world_alpha2); + + /* + * This restores the ieee80211_regdom module parameter + * preference or the last user requested regulatory + * settings, user regulatory settings takes precedence. + */ + if (is_an_alpha2(alpha2)) + regulatory_hint_user(user_alpha2, NL80211_USER_REG_HINT_USER); + + spin_lock(®_requests_lock); + list_splice_tail_init(&tmp_reg_req_list, ®_requests_list); + spin_unlock(®_requests_lock); + + REG_DBG_PRINT("Kicking the queue\n"); + + schedule_work(®_work); +} + +void regulatory_hint_disconnect(void) +{ + REG_DBG_PRINT("All devices are disconnected, going to restore regulatory settings\n"); + restore_regulatory_settings(false); +} + +static bool freq_is_chan_12_13_14(u16 freq) +{ + if (freq == ieee80211_channel_to_frequency(12, IEEE80211_BAND_2GHZ) || + freq == ieee80211_channel_to_frequency(13, IEEE80211_BAND_2GHZ) || + freq == ieee80211_channel_to_frequency(14, IEEE80211_BAND_2GHZ)) + return true; + return false; +} + +static bool pending_reg_beacon(struct ieee80211_channel *beacon_chan) +{ + struct reg_beacon *pending_beacon; + + list_for_each_entry(pending_beacon, ®_pending_beacons, list) + if (beacon_chan->center_freq == + pending_beacon->chan.center_freq) + return true; + return false; +} + +int regulatory_hint_found_beacon(struct wiphy *wiphy, + struct ieee80211_channel *beacon_chan, + gfp_t gfp) +{ + struct reg_beacon *reg_beacon; + bool processing; + + if (beacon_chan->beacon_found || + beacon_chan->flags & IEEE80211_CHAN_RADAR || + (beacon_chan->band == IEEE80211_BAND_2GHZ && + !freq_is_chan_12_13_14(beacon_chan->center_freq))) + return 0; + + spin_lock_bh(®_pending_beacons_lock); + processing = pending_reg_beacon(beacon_chan); + spin_unlock_bh(®_pending_beacons_lock); + + if (processing) + return 0; + + reg_beacon = kzalloc(sizeof(struct reg_beacon), gfp); + if (!reg_beacon) + return -ENOMEM; + + REG_DBG_PRINT("Found new beacon on frequency: %d MHz (Ch %d) on %s\n", + beacon_chan->center_freq, + ieee80211_frequency_to_channel(beacon_chan->center_freq), + wiphy_name(wiphy)); + + memcpy(®_beacon->chan, beacon_chan, + sizeof(struct ieee80211_channel)); + + /* + * Since we can be called from BH or and non-BH context + * we must use spin_lock_bh() + */ + spin_lock_bh(®_pending_beacons_lock); + list_add_tail(®_beacon->list, ®_pending_beacons); + spin_unlock_bh(®_pending_beacons_lock); + + schedule_work(®_work); + + return 0; +} + +static void print_rd_rules(const struct ieee80211_regdomain *rd) +{ + unsigned int i; + const struct ieee80211_reg_rule *reg_rule = NULL; + const struct ieee80211_freq_range *freq_range = NULL; + const struct ieee80211_power_rule *power_rule = NULL; + char bw[32], cac_time[32]; + + pr_info(" (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)\n"); + + for (i = 0; i < rd->n_reg_rules; i++) { + reg_rule = &rd->reg_rules[i]; + freq_range = ®_rule->freq_range; + power_rule = ®_rule->power_rule; + + if (reg_rule->flags & NL80211_RRF_AUTO_BW) + snprintf(bw, sizeof(bw), "%d KHz, %d KHz AUTO", + freq_range->max_bandwidth_khz, + reg_get_max_bandwidth(rd, reg_rule)); + else + snprintf(bw, sizeof(bw), "%d KHz", + freq_range->max_bandwidth_khz); + + if (reg_rule->flags & NL80211_RRF_DFS) + scnprintf(cac_time, sizeof(cac_time), "%u s", + reg_rule->dfs_cac_ms/1000); + else + scnprintf(cac_time, sizeof(cac_time), "N/A"); + + + /* + * There may not be documentation for max antenna gain + * in certain regions + */ + if (power_rule->max_antenna_gain) + pr_info(" (%d KHz - %d KHz @ %s), (%d mBi, %d mBm), (%s)\n", + freq_range->start_freq_khz, + freq_range->end_freq_khz, + bw, + power_rule->max_antenna_gain, + power_rule->max_eirp, + cac_time); + else + pr_info(" (%d KHz - %d KHz @ %s), (N/A, %d mBm), (%s)\n", + freq_range->start_freq_khz, + freq_range->end_freq_khz, + bw, + power_rule->max_eirp, + cac_time); + } +} + +bool reg_supported_dfs_region(enum nl80211_dfs_regions dfs_region) +{ + switch (dfs_region) { + case NL80211_DFS_UNSET: + case NL80211_DFS_FCC: + case NL80211_DFS_ETSI: + case NL80211_DFS_JP: + return true; + default: + REG_DBG_PRINT("Ignoring uknown DFS master region: %d\n", + dfs_region); + return false; + } +} + +static void print_regdomain(const struct ieee80211_regdomain *rd) +{ + struct regulatory_request *lr = get_last_request(); + + if (is_intersected_alpha2(rd->alpha2)) { + if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { + struct cfg80211_registered_device *rdev; + rdev = cfg80211_rdev_by_wiphy_idx(lr->wiphy_idx); + if (rdev) { + pr_info("Current regulatory domain updated by AP to: %c%c\n", + rdev->country_ie_alpha2[0], + rdev->country_ie_alpha2[1]); + } else + pr_info("Current regulatory domain intersected:\n"); + } else + pr_info("Current regulatory domain intersected:\n"); + } else if (is_world_regdom(rd->alpha2)) { + pr_info("World regulatory domain updated:\n"); + } else { + if (is_unknown_alpha2(rd->alpha2)) + pr_info("Regulatory domain changed to driver built-in settings (unknown country)\n"); + else { + if (reg_request_cell_base(lr)) + pr_info("Regulatory domain changed to country: %c%c by Cell Station\n", + rd->alpha2[0], rd->alpha2[1]); + else + pr_info("Regulatory domain changed to country: %c%c\n", + rd->alpha2[0], rd->alpha2[1]); + } + } + + pr_info(" DFS Master region: %s", reg_dfs_region_str(rd->dfs_region)); + print_rd_rules(rd); +} + +static void print_regdomain_info(const struct ieee80211_regdomain *rd) +{ + pr_info("Regulatory domain: %c%c\n", rd->alpha2[0], rd->alpha2[1]); + print_rd_rules(rd); +} + +static int reg_set_rd_core(const struct ieee80211_regdomain *rd) +{ + if (!is_world_regdom(rd->alpha2)) + return -EINVAL; + update_world_regdomain(rd); + return 0; +} + +static int reg_set_rd_user(const struct ieee80211_regdomain *rd, + struct regulatory_request *user_request) +{ + const struct ieee80211_regdomain *intersected_rd = NULL; + + if (!regdom_changes(rd->alpha2)) + return -EALREADY; + + if (!is_valid_rd(rd)) { + pr_err("Invalid regulatory domain detected:\n"); + print_regdomain_info(rd); + return -EINVAL; + } + + if (!user_request->intersect) { + reset_regdomains(false, rd); + return 0; + } + + intersected_rd = regdom_intersect(rd, get_cfg80211_regdom()); + if (!intersected_rd) + return -EINVAL; + + kfree(rd); + rd = NULL; + reset_regdomains(false, intersected_rd); + + return 0; +} + +static int reg_set_rd_driver(const struct ieee80211_regdomain *rd, + struct regulatory_request *driver_request) +{ + const struct ieee80211_regdomain *regd; + const struct ieee80211_regdomain *intersected_rd = NULL; + const struct ieee80211_regdomain *tmp; + struct wiphy *request_wiphy; + + if (is_world_regdom(rd->alpha2)) + return -EINVAL; + + if (!regdom_changes(rd->alpha2)) + return -EALREADY; + + if (!is_valid_rd(rd)) { + pr_err("Invalid regulatory domain detected:\n"); + print_regdomain_info(rd); + return -EINVAL; + } + + request_wiphy = wiphy_idx_to_wiphy(driver_request->wiphy_idx); + if (!request_wiphy) { + queue_delayed_work(system_power_efficient_wq, + ®_timeout, 0); + return -ENODEV; + } + + if (!driver_request->intersect) { + if (request_wiphy->regd) + return -EALREADY; + + regd = reg_copy_regd(rd); + if (IS_ERR(regd)) + return PTR_ERR(regd); + + rcu_assign_pointer(request_wiphy->regd, regd); + reset_regdomains(false, rd); + return 0; + } + + intersected_rd = regdom_intersect(rd, get_cfg80211_regdom()); + if (!intersected_rd) + return -EINVAL; + + /* + * We can trash what CRDA provided now. + * However if a driver requested this specific regulatory + * domain we keep it for its private use + */ + tmp = get_wiphy_regdom(request_wiphy); + rcu_assign_pointer(request_wiphy->regd, rd); + rcu_free_regdom(tmp); + + rd = NULL; + + reset_regdomains(false, intersected_rd); + + return 0; +} + +static int reg_set_rd_country_ie(const struct ieee80211_regdomain *rd, + struct regulatory_request *country_ie_request) +{ + struct wiphy *request_wiphy; + + if (!is_alpha2_set(rd->alpha2) && !is_an_alpha2(rd->alpha2) && + !is_unknown_alpha2(rd->alpha2)) + return -EINVAL; + + /* + * Lets only bother proceeding on the same alpha2 if the current + * rd is non static (it means CRDA was present and was used last) + * and the pending request came in from a country IE + */ + + if (!is_valid_rd(rd)) { + pr_err("Invalid regulatory domain detected:\n"); + print_regdomain_info(rd); + return -EINVAL; + } + + request_wiphy = wiphy_idx_to_wiphy(country_ie_request->wiphy_idx); + if (!request_wiphy) { + queue_delayed_work(system_power_efficient_wq, + ®_timeout, 0); + return -ENODEV; + } + + if (country_ie_request->intersect) + return -EINVAL; + + reset_regdomains(false, rd); + return 0; +} + +/* + * Use this call to set the current regulatory domain. Conflicts with + * multiple drivers can be ironed out later. Caller must've already + * kmalloc'd the rd structure. + */ +int set_regdom(const struct ieee80211_regdomain *rd, + enum ieee80211_regd_source regd_src) +{ + struct regulatory_request *lr; + bool user_reset = false; + int r; + + if (!reg_is_valid_request(rd->alpha2)) { + kfree(rd); + return -EINVAL; + } + + if (regd_src == REGD_SOURCE_CRDA) + reg_crda_timeouts = 0; + + lr = get_last_request(); + + /* Note that this doesn't update the wiphys, this is done below */ + switch (lr->initiator) { + case NL80211_REGDOM_SET_BY_CORE: + r = reg_set_rd_core(rd); + break; + case NL80211_REGDOM_SET_BY_USER: + r = reg_set_rd_user(rd, lr); + user_reset = true; + break; + case NL80211_REGDOM_SET_BY_DRIVER: + r = reg_set_rd_driver(rd, lr); + break; + case NL80211_REGDOM_SET_BY_COUNTRY_IE: + r = reg_set_rd_country_ie(rd, lr); + break; + default: + WARN(1, "invalid initiator %d\n", lr->initiator); + return -EINVAL; + } + + if (r) { + switch (r) { + case -EALREADY: + reg_set_request_processed(); + break; + default: + /* Back to world regulatory in case of errors */ + restore_regulatory_settings(user_reset); + } + + kfree(rd); + return r; + } + + /* This would make this whole thing pointless */ + if (WARN_ON(!lr->intersect && rd != get_cfg80211_regdom())) + return -EINVAL; + + /* update all wiphys now with the new established regulatory domain */ + update_all_wiphy_regulatory(lr->initiator); + + print_regdomain(get_cfg80211_regdom()); + + nl80211_send_reg_change_event(lr); + + reg_set_request_processed(); + + return 0; +} + +static int __regulatory_set_wiphy_regd(struct wiphy *wiphy, + struct ieee80211_regdomain *rd) +{ + const struct ieee80211_regdomain *regd; + const struct ieee80211_regdomain *prev_regd; + struct cfg80211_registered_device *rdev; + + if (WARN_ON(!wiphy || !rd)) + return -EINVAL; + + if (WARN(!(wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED), + "wiphy should have REGULATORY_WIPHY_SELF_MANAGED\n")) + return -EPERM; + + if (WARN(!is_valid_rd(rd), "Invalid regulatory domain detected\n")) { + print_regdomain_info(rd); + return -EINVAL; + } + + regd = reg_copy_regd(rd); + if (IS_ERR(regd)) + return PTR_ERR(regd); + + rdev = wiphy_to_rdev(wiphy); + + spin_lock(®_requests_lock); + prev_regd = rdev->requested_regd; + rdev->requested_regd = regd; + spin_unlock(®_requests_lock); + + kfree(prev_regd); + return 0; +} + +int regulatory_set_wiphy_regd(struct wiphy *wiphy, + struct ieee80211_regdomain *rd) +{ + int ret = __regulatory_set_wiphy_regd(wiphy, rd); + + if (ret) + return ret; + + schedule_work(®_work); + return 0; +} +EXPORT_SYMBOL(regulatory_set_wiphy_regd); + +int regulatory_set_wiphy_regd_sync_rtnl(struct wiphy *wiphy, + struct ieee80211_regdomain *rd) +{ + int ret; + + ASSERT_RTNL(); + + ret = __regulatory_set_wiphy_regd(wiphy, rd); + if (ret) + return ret; + + /* process the request immediately */ + reg_process_self_managed_hints(); + return 0; +} +EXPORT_SYMBOL(regulatory_set_wiphy_regd_sync_rtnl); + +void wiphy_regulatory_register(struct wiphy *wiphy) +{ + struct regulatory_request *lr; + + /* self-managed devices ignore external hints */ + if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) + wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS | + REGULATORY_COUNTRY_IE_IGNORE; + + if (!reg_dev_ignore_cell_hint(wiphy)) + reg_num_devs_support_basehint++; + + lr = get_last_request(); + wiphy_update_regulatory(wiphy, lr->initiator); +} + +void wiphy_regulatory_deregister(struct wiphy *wiphy) +{ + struct wiphy *request_wiphy = NULL; + struct regulatory_request *lr; + + lr = get_last_request(); + + if (!reg_dev_ignore_cell_hint(wiphy)) + reg_num_devs_support_basehint--; + + rcu_free_regdom(get_wiphy_regdom(wiphy)); + RCU_INIT_POINTER(wiphy->regd, NULL); + + if (lr) + request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); + + if (!request_wiphy || request_wiphy != wiphy) + return; + + lr->wiphy_idx = WIPHY_IDX_INVALID; + lr->country_ie_env = ENVIRON_ANY; +} + +static void reg_timeout_work(struct work_struct *work) +{ + REG_DBG_PRINT("Timeout while waiting for CRDA to reply, restoring regulatory settings\n"); + rtnl_lock(); + reg_crda_timeouts++; + restore_regulatory_settings(true); + rtnl_unlock(); +} + +/* + * See http://www.fcc.gov/document/5-ghz-unlicensed-spectrum-unii, for + * UNII band definitions + */ +int cfg80211_get_unii(int freq) +{ + /* UNII-1 */ + if (freq >= 5150 && freq <= 5250) + return 0; + + /* UNII-2A */ + if (freq > 5250 && freq <= 5350) + return 1; + + /* UNII-2B */ + if (freq > 5350 && freq <= 5470) + return 2; + + /* UNII-2C */ + if (freq > 5470 && freq <= 5725) + return 3; + + /* UNII-3 */ + if (freq > 5725 && freq <= 5825) + return 4; + + return -EINVAL; +} + +bool regulatory_indoor_allowed(void) +{ + return reg_is_indoor; +} + +int __init regulatory_init(void) +{ + int err = 0; + + reg_pdev = platform_device_register_simple("regulatory", 0, NULL, 0); + if (IS_ERR(reg_pdev)) + return PTR_ERR(reg_pdev); + + spin_lock_init(®_requests_lock); + spin_lock_init(®_pending_beacons_lock); + spin_lock_init(®_indoor_lock); + + reg_regdb_size_check(); + + rcu_assign_pointer(cfg80211_regdomain, cfg80211_world_regdom); + + user_alpha2[0] = '9'; + user_alpha2[1] = '7'; + + /* We always try to get an update for the static regdomain */ + err = regulatory_hint_core(cfg80211_world_regdom->alpha2); + if (err) { + if (err == -ENOMEM) + return err; + /* + * N.B. kobject_uevent_env() can fail mainly for when we're out + * memory which is handled and propagated appropriately above + * but it can also fail during a netlink_broadcast() or during + * early boot for call_usermodehelper(). For now treat these + * errors as non-fatal. + */ + pr_err("kobject_uevent_env() was unable to call CRDA during init\n"); + } + + /* + * Finally, if the user set the module parameter treat it + * as a user hint. + */ + if (!is_world_regdom(ieee80211_regdom)) + regulatory_hint_user(ieee80211_regdom, + NL80211_USER_REG_HINT_USER); + + return 0; +} + +void regulatory_exit(void) +{ + struct regulatory_request *reg_request, *tmp; + struct reg_beacon *reg_beacon, *btmp; + + cancel_work_sync(®_work); + cancel_delayed_work_sync(®_timeout); + cancel_delayed_work_sync(®_check_chans); + + /* Lock to suppress warnings */ + rtnl_lock(); + reset_regdomains(true, NULL); + rtnl_unlock(); + + dev_set_uevent_suppress(®_pdev->dev, true); + + platform_device_unregister(reg_pdev); + + list_for_each_entry_safe(reg_beacon, btmp, ®_pending_beacons, list) { + list_del(®_beacon->list); + kfree(reg_beacon); + } + + list_for_each_entry_safe(reg_beacon, btmp, ®_beacon_list, list) { + list_del(®_beacon->list); + kfree(reg_beacon); + } + + list_for_each_entry_safe(reg_request, tmp, ®_requests_list, list) { + list_del(®_request->list); + kfree(reg_request); + } +} |