diff options
Diffstat (limited to 'sound/arm/pxa2xx-ac97-lib.c')
| -rw-r--r-- | sound/arm/pxa2xx-ac97-lib.c | 415 |
1 files changed, 415 insertions, 0 deletions
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c new file mode 100644 index 000000000..39c3969ac --- /dev/null +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -0,0 +1,415 @@ +/* + * Based on sound/arm/pxa2xx-ac97.c and sound/soc/pxa/pxa2xx-ac97.c + * which contain: + * + * Author: Nicolas Pitre + * Created: Dec 02, 2004 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <sound/ac97_codec.h> +#include <sound/pxa2xx-lib.h> + +#include <mach/irqs.h> +#include <mach/regs-ac97.h> +#include <mach/audio.h> + +static DEFINE_MUTEX(car_mutex); +static DECLARE_WAIT_QUEUE_HEAD(gsr_wq); +static volatile long gsr_bits; +static struct clk *ac97_clk; +static struct clk *ac97conf_clk; +static int reset_gpio; + +extern void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio); + +/* + * Beware PXA27x bugs: + * + * o Slot 12 read from modem space will hang controller. + * o CDONE, SDONE interrupt fails after any slot 12 IO. + * + * We therefore have an hybrid approach for waiting on SDONE (interrupt or + * 1 jiffy timeout if interrupt never comes). + */ + +unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg) +{ + unsigned short val = -1; + volatile u32 *reg_addr; + + mutex_lock(&car_mutex); + + /* set up primary or secondary codec space */ + if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS) + reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE; + else + reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; + reg_addr += (reg >> 1); + + /* start read access across the ac97 link */ + GSR = GSR_CDONE | GSR_SDONE; + gsr_bits = 0; + val = *reg_addr; + if (reg == AC97_GPIO_STATUS) + goto out; + if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1) <= 0 && + !((GSR | gsr_bits) & GSR_SDONE)) { + printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n", + __func__, reg, GSR | gsr_bits); + val = -1; + goto out; + } + + /* valid data now */ + GSR = GSR_CDONE | GSR_SDONE; + gsr_bits = 0; + val = *reg_addr; + /* but we've just started another cycle... */ + wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1); + +out: mutex_unlock(&car_mutex); + return val; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_read); + +void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, + unsigned short val) +{ + volatile u32 *reg_addr; + + mutex_lock(&car_mutex); + + /* set up primary or secondary codec space */ + if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS) + reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE; + else + reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; + reg_addr += (reg >> 1); + + GSR = GSR_CDONE | GSR_SDONE; + gsr_bits = 0; + *reg_addr = val; + if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1) <= 0 && + !((GSR | gsr_bits) & GSR_CDONE)) + printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n", + __func__, reg, GSR | gsr_bits); + + mutex_unlock(&car_mutex); +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_write); + +#ifdef CONFIG_PXA25x +static inline void pxa_ac97_warm_pxa25x(void) +{ + gsr_bits = 0; + + GCR |= GCR_WARM_RST; +} + +static inline void pxa_ac97_cold_pxa25x(void) +{ + GCR &= GCR_COLD_RST; /* clear everything but nCRST */ + GCR &= ~GCR_COLD_RST; /* then assert nCRST */ + + gsr_bits = 0; + + GCR = GCR_COLD_RST; +} +#endif + +#ifdef CONFIG_PXA27x +static inline void pxa_ac97_warm_pxa27x(void) +{ + gsr_bits = 0; + + /* warm reset broken on Bulverde, so manually keep AC97 reset high */ + pxa27x_configure_ac97reset(reset_gpio, true); + udelay(10); + GCR |= GCR_WARM_RST; + pxa27x_configure_ac97reset(reset_gpio, false); + udelay(500); +} + +static inline void pxa_ac97_cold_pxa27x(void) +{ + GCR &= GCR_COLD_RST; /* clear everything but nCRST */ + GCR &= ~GCR_COLD_RST; /* then assert nCRST */ + + gsr_bits = 0; + + /* PXA27x Developers Manual section 13.5.2.2.1 */ + clk_prepare_enable(ac97conf_clk); + udelay(5); + clk_disable_unprepare(ac97conf_clk); + GCR = GCR_COLD_RST | GCR_WARM_RST; +} +#endif + +#ifdef CONFIG_PXA3xx +static inline void pxa_ac97_warm_pxa3xx(void) +{ + gsr_bits = 0; + + /* Can't use interrupts */ + GCR |= GCR_WARM_RST; +} + +static inline void pxa_ac97_cold_pxa3xx(void) +{ + /* Hold CLKBPB for 100us */ + GCR = 0; + GCR = GCR_CLKBPB; + udelay(100); + GCR = 0; + + GCR &= GCR_COLD_RST; /* clear everything but nCRST */ + GCR &= ~GCR_COLD_RST; /* then assert nCRST */ + + gsr_bits = 0; + + /* Can't use interrupts on PXA3xx */ + GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); + + GCR = GCR_WARM_RST | GCR_COLD_RST; +} +#endif + +bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97) +{ + unsigned long gsr; + unsigned int timeout = 100; + +#ifdef CONFIG_PXA25x + if (cpu_is_pxa25x()) + pxa_ac97_warm_pxa25x(); + else +#endif +#ifdef CONFIG_PXA27x + if (cpu_is_pxa27x()) + pxa_ac97_warm_pxa27x(); + else +#endif +#ifdef CONFIG_PXA3xx + if (cpu_is_pxa3xx()) + pxa_ac97_warm_pxa3xx(); + else +#endif + snd_BUG(); + + while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) + mdelay(1); + + gsr = GSR | gsr_bits; + if (!(gsr & (GSR_PCR | GSR_SCR))) { + printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n", + __func__, gsr); + + return false; + } + + return true; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset); + +bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97) +{ + unsigned long gsr; + unsigned int timeout = 1000; + +#ifdef CONFIG_PXA25x + if (cpu_is_pxa25x()) + pxa_ac97_cold_pxa25x(); + else +#endif +#ifdef CONFIG_PXA27x + if (cpu_is_pxa27x()) + pxa_ac97_cold_pxa27x(); + else +#endif +#ifdef CONFIG_PXA3xx + if (cpu_is_pxa3xx()) + pxa_ac97_cold_pxa3xx(); + else +#endif + snd_BUG(); + + while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) + mdelay(1); + + gsr = GSR | gsr_bits; + if (!(gsr & (GSR_PCR | GSR_SCR))) { + printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n", + __func__, gsr); + + return false; + } + + return true; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_cold_reset); + + +void pxa2xx_ac97_finish_reset(struct snd_ac97 *ac97) +{ + GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); + GCR |= GCR_SDONE_IE|GCR_CDONE_IE; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_finish_reset); + +static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id) +{ + long status; + + status = GSR; + if (status) { + GSR = status; + gsr_bits |= status; + wake_up(&gsr_wq); + + /* Although we don't use those we still need to clear them + since they tend to spuriously trigger when MMC is used + (hardware bug? go figure)... */ + if (cpu_is_pxa27x()) { + MISR = MISR_EOC; + PISR = PISR_EOC; + MCSR = MCSR_EOC; + } + + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +#ifdef CONFIG_PM +int pxa2xx_ac97_hw_suspend(void) +{ + GCR |= GCR_ACLINK_OFF; + clk_disable_unprepare(ac97_clk); + return 0; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_suspend); + +int pxa2xx_ac97_hw_resume(void) +{ + clk_prepare_enable(ac97_clk); + return 0; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume); +#endif + +int pxa2xx_ac97_hw_probe(struct platform_device *dev) +{ + int ret; + pxa2xx_audio_ops_t *pdata = dev->dev.platform_data; + + if (pdata) { + switch (pdata->reset_gpio) { + case 95: + case 113: + reset_gpio = pdata->reset_gpio; + break; + case 0: + reset_gpio = 113; + break; + case -1: + break; + default: + dev_err(&dev->dev, "Invalid reset GPIO %d\n", + pdata->reset_gpio); + } + } else { + if (cpu_is_pxa27x()) + reset_gpio = 113; + } + + if (cpu_is_pxa27x()) { + /* + * This gpio is needed for a work-around to a bug in the ac97 + * controller during warm reset. The direction and level is set + * here so that it is an output driven high when switching from + * AC97_nRESET alt function to generic gpio. + */ + ret = gpio_request_one(reset_gpio, GPIOF_OUT_INIT_HIGH, + "pxa27x ac97 reset"); + if (ret < 0) { + pr_err("%s: gpio_request_one() failed: %d\n", + __func__, ret); + goto err_conf; + } + pxa27x_configure_ac97reset(reset_gpio, false); + + ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK"); + if (IS_ERR(ac97conf_clk)) { + ret = PTR_ERR(ac97conf_clk); + ac97conf_clk = NULL; + goto err_conf; + } + } + + ac97_clk = clk_get(&dev->dev, "AC97CLK"); + if (IS_ERR(ac97_clk)) { + ret = PTR_ERR(ac97_clk); + ac97_clk = NULL; + goto err_clk; + } + + ret = clk_prepare_enable(ac97_clk); + if (ret) + goto err_clk2; + + ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, 0, "AC97", NULL); + if (ret < 0) + goto err_irq; + + return 0; + +err_irq: + GCR |= GCR_ACLINK_OFF; +err_clk2: + clk_put(ac97_clk); + ac97_clk = NULL; +err_clk: + if (ac97conf_clk) { + clk_put(ac97conf_clk); + ac97conf_clk = NULL; + } +err_conf: + return ret; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_probe); + +void pxa2xx_ac97_hw_remove(struct platform_device *dev) +{ + if (cpu_is_pxa27x()) + gpio_free(reset_gpio); + GCR |= GCR_ACLINK_OFF; + free_irq(IRQ_AC97, NULL); + if (ac97conf_clk) { + clk_put(ac97conf_clk); + ac97conf_clk = NULL; + } + clk_disable_unprepare(ac97_clk); + clk_put(ac97_clk); + ac97_clk = NULL; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_remove); + +MODULE_AUTHOR("Nicolas Pitre"); +MODULE_DESCRIPTION("Intel/Marvell PXA sound library"); +MODULE_LICENSE("GPL"); + |