diff options
Diffstat (limited to 'sound/oss/sb_common.c')
| -rw-r--r-- | sound/oss/sb_common.c | 1287 |
1 files changed, 1287 insertions, 0 deletions
diff --git a/sound/oss/sb_common.c b/sound/oss/sb_common.c new file mode 100644 index 000000000..cabe46240 --- /dev/null +++ b/sound/oss/sb_common.c @@ -0,0 +1,1287 @@ +/* + * sound/oss/sb_common.c + * + * Common routines for Sound Blaster compatible cards. + * + * + * Copyright (C) by Hannu Savolainen 1993-1997 + * + * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) + * Version 2 (June 1991). See the "COPYING" file distributed with this software + * for more info. + * + * + * Daniel J. Rodriksson: Modified sbintr to handle 8 and 16 bit interrupts + * for full duplex support ( only sb16 by now ) + * Rolf Fokkens: Added (BETA?) support for ES1887 chips. + * (fokkensr@vertis.nl) Which means: You can adjust the recording levels. + * + * 2000/01/18 - separated sb_card and sb_common - + * Jeff Garzik <jgarzik@pobox.com> + * + * 2000/09/18 - got rid of attach_uart401 + * Arnaldo Carvalho de Melo <acme@conectiva.com.br> + * + * 2001/01/26 - replaced CLI/STI with spinlocks + * Chris Rankin <rankinc@zipworld.com.au> + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/slab.h> + +#include "sound_config.h" +#include "sound_firmware.h" + +#include "mpu401.h" + +#include "sb_mixer.h" +#include "sb.h" +#include "sb_ess.h" + +/* + * global module flag + */ + +int sb_be_quiet; + +static sb_devc *detected_devc; /* For communication from probe to init */ +static sb_devc *last_devc; /* For MPU401 initialization */ + +static unsigned char jazz_irq_bits[] = { + 0, 0, 2, 3, 0, 1, 0, 4, 0, 2, 5, 0, 0, 0, 0, 6 +}; + +static unsigned char jazz_dma_bits[] = { + 0, 1, 0, 2, 0, 3, 0, 4 +}; + +void *smw_free; + +/* + * Jazz16 chipset specific control variables + */ + +static int jazz16_base; /* Not detected */ +static unsigned char jazz16_bits; /* I/O relocation bits */ +static DEFINE_SPINLOCK(jazz16_lock); + +/* + * Logitech Soundman Wave specific initialization code + */ + +#ifdef SMW_MIDI0001_INCLUDED +#include "smw-midi0001.h" +#else +static unsigned char *smw_ucode; +static int smw_ucodeLen; + +#endif + +static sb_devc *last_sb; /* Last sb loaded */ + +int sb_dsp_command(sb_devc * devc, unsigned char val) +{ + int i; + unsigned long limit; + + limit = jiffies + HZ / 10; /* Timeout */ + + /* + * Note! the i<500000 is an emergency exit. The sb_dsp_command() is sometimes + * called while interrupts are disabled. This means that the timer is + * disabled also. However the timeout situation is a abnormal condition. + * Normally the DSP should be ready to accept commands after just couple of + * loops. + */ + + for (i = 0; i < 500000 && (limit-jiffies)>0; i++) + { + if ((inb(DSP_STATUS) & 0x80) == 0) + { + outb((val), DSP_COMMAND); + return 1; + } + } + printk(KERN_WARNING "Sound Blaster: DSP command(%x) timeout.\n", val); + return 0; +} + +int sb_dsp_get_byte(sb_devc * devc) +{ + int i; + + for (i = 1000; i; i--) + { + if (inb(DSP_DATA_AVAIL) & 0x80) + return inb(DSP_READ); + } + return 0xffff; +} + +static void sb_intr (sb_devc *devc) +{ + int status; + unsigned char src = 0xff; + + if (devc->model == MDL_SB16) + { + src = sb_getmixer(devc, IRQ_STAT); /* Interrupt source register */ + + if (src & 4) /* MPU401 interrupt */ + if(devc->midi_irq_cookie) + uart401intr(devc->irq, devc->midi_irq_cookie); + + if (!(src & 3)) + return; /* Not a DSP interrupt */ + } + if (devc->intr_active && (!devc->fullduplex || (src & 0x01))) + { + switch (devc->irq_mode) + { + case IMODE_OUTPUT: + DMAbuf_outputintr(devc->dev, 1); + break; + + case IMODE_INPUT: + DMAbuf_inputintr(devc->dev); + break; + + case IMODE_INIT: + break; + + case IMODE_MIDI: + sb_midi_interrupt(devc); + break; + + default: + /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */ + ; + } + } + else if (devc->intr_active_16 && (src & 0x02)) + { + switch (devc->irq_mode_16) + { + case IMODE_OUTPUT: + DMAbuf_outputintr(devc->dev, 1); + break; + + case IMODE_INPUT: + DMAbuf_inputintr(devc->dev); + break; + + case IMODE_INIT: + break; + + default: + /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */ + ; + } + } + /* + * Acknowledge interrupts + */ + + if (src & 0x01) + status = inb(DSP_DATA_AVAIL); + + if (devc->model == MDL_SB16 && src & 0x02) + status = inb(DSP_DATA_AVL16); +} + +static void pci_intr(sb_devc *devc) +{ + int src = inb(devc->pcibase+0x1A); + src&=3; + if(src) + sb_intr(devc); +} + +static irqreturn_t sbintr(int irq, void *dev_id) +{ + sb_devc *devc = dev_id; + + devc->irq_ok = 1; + + switch (devc->model) { + case MDL_ESSPCI: + pci_intr (devc); + break; + + case MDL_ESS: + ess_intr (devc); + break; + default: + sb_intr (devc); + break; + } + return IRQ_HANDLED; +} + +int sb_dsp_reset(sb_devc * devc) +{ + int loopc; + + if (devc->model == MDL_ESS) return ess_dsp_reset (devc); + + /* This is only for non-ESS chips */ + + outb(1, DSP_RESET); + + udelay(10); + outb(0, DSP_RESET); + udelay(30); + + for (loopc = 0; loopc < 1000 && !(inb(DSP_DATA_AVAIL) & 0x80); loopc++); + + if (inb(DSP_READ) != 0xAA) + { + DDB(printk("sb: No response to RESET\n")); + return 0; /* Sorry */ + } + + return 1; +} + +static void dsp_get_vers(sb_devc * devc) +{ + int i; + + unsigned long flags; + + DDB(printk("Entered dsp_get_vers()\n")); + spin_lock_irqsave(&devc->lock, flags); + devc->major = devc->minor = 0; + sb_dsp_command(devc, 0xe1); /* Get version */ + + for (i = 100000; i; i--) + { + if (inb(DSP_DATA_AVAIL) & 0x80) + { + if (devc->major == 0) + devc->major = inb(DSP_READ); + else + { + devc->minor = inb(DSP_READ); + break; + } + } + } + spin_unlock_irqrestore(&devc->lock, flags); + DDB(printk("DSP version %d.%02d\n", devc->major, devc->minor)); +} + +static int sb16_set_dma_hw(sb_devc * devc) +{ + int bits; + + if (devc->dma8 != 0 && devc->dma8 != 1 && devc->dma8 != 3) + { + printk(KERN_ERR "SB16: Invalid 8 bit DMA (%d)\n", devc->dma8); + return 0; + } + bits = (1 << devc->dma8); + + if (devc->dma16 >= 5 && devc->dma16 <= 7) + bits |= (1 << devc->dma16); + + sb_setmixer(devc, DMA_NR, bits); + return 1; +} + +static void sb16_set_mpu_port(sb_devc * devc, struct address_info *hw_config) +{ + /* + * This routine initializes new MIDI port setup register of SB Vibra (CT2502). + */ + unsigned char bits = sb_getmixer(devc, 0x84) & ~0x06; + + switch (hw_config->io_base) + { + case 0x300: + sb_setmixer(devc, 0x84, bits | 0x04); + break; + + case 0x330: + sb_setmixer(devc, 0x84, bits | 0x00); + break; + + default: + sb_setmixer(devc, 0x84, bits | 0x02); /* Disable MPU */ + printk(KERN_ERR "SB16: Invalid MIDI I/O port %x\n", hw_config->io_base); + } +} + +static int sb16_set_irq_hw(sb_devc * devc, int level) +{ + int ival; + + switch (level) + { + case 5: + ival = 2; + break; + case 7: + ival = 4; + break; + case 9: + ival = 1; + break; + case 10: + ival = 8; + break; + default: + printk(KERN_ERR "SB16: Invalid IRQ%d\n", level); + return 0; + } + sb_setmixer(devc, IRQ_NR, ival); + return 1; +} + +static void relocate_Jazz16(sb_devc * devc, struct address_info *hw_config) +{ + unsigned char bits = 0; + unsigned long flags; + + if (jazz16_base != 0 && jazz16_base != hw_config->io_base) + return; + + switch (hw_config->io_base) + { + case 0x220: + bits = 1; + break; + case 0x240: + bits = 2; + break; + case 0x260: + bits = 3; + break; + default: + return; + } + bits = jazz16_bits = bits << 5; + jazz16_base = hw_config->io_base; + + /* + * Magic wake up sequence by writing to 0x201 (aka Joystick port) + */ + spin_lock_irqsave(&jazz16_lock, flags); + outb((0xAF), 0x201); + outb((0x50), 0x201); + outb((bits), 0x201); + spin_unlock_irqrestore(&jazz16_lock, flags); +} + +static int init_Jazz16(sb_devc * devc, struct address_info *hw_config) +{ + char name[100]; + /* + * First try to check that the card has Jazz16 chip. It identifies itself + * by returning 0x12 as response to DSP command 0xfa. + */ + + if (!sb_dsp_command(devc, 0xfa)) + return 0; + + if (sb_dsp_get_byte(devc) != 0x12) + return 0; + + /* + * OK so far. Now configure the IRQ and DMA channel used by the card. + */ + if (hw_config->irq < 1 || hw_config->irq > 15 || jazz_irq_bits[hw_config->irq] == 0) + { + printk(KERN_ERR "Jazz16: Invalid interrupt (IRQ%d)\n", hw_config->irq); + return 0; + } + if (hw_config->dma < 0 || hw_config->dma > 3 || jazz_dma_bits[hw_config->dma] == 0) + { + printk(KERN_ERR "Jazz16: Invalid 8 bit DMA (DMA%d)\n", hw_config->dma); + return 0; + } + if (hw_config->dma2 < 0) + { + printk(KERN_ERR "Jazz16: No 16 bit DMA channel defined\n"); + return 0; + } + if (hw_config->dma2 < 5 || hw_config->dma2 > 7 || jazz_dma_bits[hw_config->dma2] == 0) + { + printk(KERN_ERR "Jazz16: Invalid 16 bit DMA (DMA%d)\n", hw_config->dma2); + return 0; + } + devc->dma16 = hw_config->dma2; + + if (!sb_dsp_command(devc, 0xfb)) + return 0; + + if (!sb_dsp_command(devc, jazz_dma_bits[hw_config->dma] | + (jazz_dma_bits[hw_config->dma2] << 4))) + return 0; + + if (!sb_dsp_command(devc, jazz_irq_bits[hw_config->irq])) + return 0; + + /* + * Now we have configured a standard Jazz16 device. + */ + devc->model = MDL_JAZZ; + strcpy(name, "Jazz16"); + + hw_config->name = "Jazz16"; + devc->caps |= SB_NO_MIDI; + return 1; +} + +static void relocate_ess1688(sb_devc * devc) +{ + unsigned char bits; + + switch (devc->base) + { + case 0x220: + bits = 0x04; + break; + case 0x230: + bits = 0x05; + break; + case 0x240: + bits = 0x06; + break; + case 0x250: + bits = 0x07; + break; + default: + return; /* Wrong port */ + } + + DDB(printk("Doing ESS1688 address selection\n")); + + /* + * ES1688 supports two alternative ways for software address config. + * First try the so called Read-Sequence-Key method. + */ + + /* Reset the sequence logic */ + inb(0x229); + inb(0x229); + inb(0x229); + + /* Perform the read sequence */ + inb(0x22b); + inb(0x229); + inb(0x22b); + inb(0x229); + inb(0x229); + inb(0x22b); + inb(0x229); + + /* Select the base address by reading from it. Then probe using the port. */ + inb(devc->base); + if (sb_dsp_reset(devc)) /* Bingo */ + return; + +#if 0 /* This causes system lockups (Nokia 386/25 at least) */ + /* + * The last resort is the system control register method. + */ + + outb((0x00), 0xfb); /* 0xFB is the unlock register */ + outb((0x00), 0xe0); /* Select index 0 */ + outb((bits), 0xe1); /* Write the config bits */ + outb((0x00), 0xf9); /* 0xFB is the lock register */ +#endif +} + +int sb_dsp_detect(struct address_info *hw_config, int pci, int pciio, struct sb_module_options *sbmo) +{ + sb_devc sb_info; + sb_devc *devc = &sb_info; + + memset((char *) &sb_info, 0, sizeof(sb_info)); /* Zero everything */ + + /* Copy module options in place */ + if(sbmo) memcpy(&devc->sbmo, sbmo, sizeof(struct sb_module_options)); + + sb_info.my_mididev = -1; + sb_info.my_mixerdev = -1; + sb_info.dev = -1; + + /* + * Initialize variables + */ + + DDB(printk("sb_dsp_detect(%x) entered\n", hw_config->io_base)); + + spin_lock_init(&devc->lock); + devc->type = hw_config->card_subtype; + + devc->base = hw_config->io_base; + devc->irq = hw_config->irq; + devc->dma8 = hw_config->dma; + + devc->dma16 = -1; + devc->pcibase = pciio; + + if(pci == SB_PCI_ESSMAESTRO) + { + devc->model = MDL_ESSPCI; + devc->caps |= SB_PCI_IRQ; + hw_config->driver_use_1 |= SB_PCI_IRQ; + hw_config->card_subtype = MDL_ESSPCI; + } + + if(pci == SB_PCI_YAMAHA) + { + devc->model = MDL_YMPCI; + devc->caps |= SB_PCI_IRQ; + hw_config->driver_use_1 |= SB_PCI_IRQ; + hw_config->card_subtype = MDL_YMPCI; + + printk("Yamaha PCI mode.\n"); + } + + if (devc->sbmo.acer) + { + unsigned long flags; + + spin_lock_irqsave(&devc->lock, flags); + inb(devc->base + 0x09); + inb(devc->base + 0x09); + inb(devc->base + 0x09); + inb(devc->base + 0x0b); + inb(devc->base + 0x09); + inb(devc->base + 0x0b); + inb(devc->base + 0x09); + inb(devc->base + 0x09); + inb(devc->base + 0x0b); + inb(devc->base + 0x09); + inb(devc->base + 0x00); + spin_unlock_irqrestore(&devc->lock, flags); + } + /* + * Detect the device + */ + + if (sb_dsp_reset(devc)) + dsp_get_vers(devc); + else + devc->major = 0; + + if (devc->type == 0 || devc->type == MDL_JAZZ || devc->type == MDL_SMW) + if (devc->major == 0 || (devc->major == 3 && devc->minor == 1)) + relocate_Jazz16(devc, hw_config); + + if (devc->major == 0 && (devc->type == MDL_ESS || devc->type == 0)) + relocate_ess1688(devc); + + if (!sb_dsp_reset(devc)) + { + DDB(printk("SB reset failed\n")); +#ifdef MODULE + printk(KERN_INFO "sb: dsp reset failed.\n"); +#endif + return 0; + } + if (devc->major == 0) + dsp_get_vers(devc); + + if (devc->major == 3 && devc->minor == 1) + { + if (devc->type == MDL_AZTECH) /* SG Washington? */ + { + if (sb_dsp_command(devc, 0x09)) + if (sb_dsp_command(devc, 0x00)) /* Enter WSS mode */ + { + int i; + + /* Have some delay */ + for (i = 0; i < 10000; i++) + inb(DSP_DATA_AVAIL); + devc->caps = SB_NO_AUDIO | SB_NO_MIDI; /* Mixer only */ + devc->model = MDL_AZTECH; + } + } + } + + if(devc->type == MDL_ESSPCI) + devc->model = MDL_ESSPCI; + + if(devc->type == MDL_YMPCI) + { + printk("YMPCI selected\n"); + devc->model = MDL_YMPCI; + } + + /* + * Save device information for sb_dsp_init() + */ + + + detected_devc = kmemdup(devc, sizeof(sb_devc), GFP_KERNEL); + if (detected_devc == NULL) + { + printk(KERN_ERR "sb: Can't allocate memory for device information\n"); + return 0; + } + MDB(printk(KERN_INFO "SB %d.%02d detected OK (%x)\n", devc->major, devc->minor, hw_config->io_base)); + return 1; +} + +int sb_dsp_init(struct address_info *hw_config, struct module *owner) +{ + sb_devc *devc; + char name[100]; + extern int sb_be_quiet; + int mixer22, mixer30; + +/* + * Check if we had detected a SB device earlier + */ + DDB(printk("sb_dsp_init(%x) entered\n", hw_config->io_base)); + name[0] = 0; + + if (detected_devc == NULL) + { + MDB(printk("No detected device\n")); + return 0; + } + devc = detected_devc; + detected_devc = NULL; + + if (devc->base != hw_config->io_base) + { + DDB(printk("I/O port mismatch\n")); + release_region(devc->base, 16); + return 0; + } + /* + * Now continue initialization of the device + */ + + devc->caps = hw_config->driver_use_1; + + if (!((devc->caps & SB_NO_AUDIO) && (devc->caps & SB_NO_MIDI)) && hw_config->irq > 0) + { /* IRQ setup */ + + /* + * ESS PCI cards do shared PCI IRQ stuff. Since they + * will get shared PCI irq lines we must cope. + */ + + int i=(devc->caps&SB_PCI_IRQ)?IRQF_SHARED:0; + + if (request_irq(hw_config->irq, sbintr, i, "soundblaster", devc) < 0) + { + printk(KERN_ERR "SB: Can't allocate IRQ%d\n", hw_config->irq); + release_region(devc->base, 16); + return 0; + } + devc->irq_ok = 0; + + if (devc->major == 4) + if (!sb16_set_irq_hw(devc, devc->irq)) /* Unsupported IRQ */ + { + free_irq(devc->irq, devc); + release_region(devc->base, 16); + return 0; + } + if ((devc->type == 0 || devc->type == MDL_ESS) && + devc->major == 3 && devc->minor == 1) + { /* Handle various chipsets which claim they are SB Pro compatible */ + if ((devc->type != 0 && devc->type != MDL_ESS) || + !ess_init(devc, hw_config)) + { + if ((devc->type != 0 && devc->type != MDL_JAZZ && + devc->type != MDL_SMW) || !init_Jazz16(devc, hw_config)) + { + DDB(printk("This is a genuine SB Pro\n")); + } + } + } + if (devc->major == 4 && devc->minor <= 11 ) /* Won't work */ + devc->irq_ok = 1; + else + { + int n; + + for (n = 0; n < 3 && devc->irq_ok == 0; n++) + { + if (sb_dsp_command(devc, 0xf2)) /* Cause interrupt immediately */ + { + int i; + + for (i = 0; !devc->irq_ok && i < 10000; i++); + } + } + if (!devc->irq_ok) + printk(KERN_WARNING "sb: Interrupt test on IRQ%d failed - Probable IRQ conflict\n", devc->irq); + else + { + DDB(printk("IRQ test OK (IRQ%d)\n", devc->irq)); + } + } + } /* IRQ setup */ + + last_sb = devc; + + switch (devc->major) + { + case 1: /* SB 1.0 or 1.5 */ + devc->model = hw_config->card_subtype = MDL_SB1; + break; + + case 2: /* SB 2.x */ + if (devc->minor == 0) + devc->model = hw_config->card_subtype = MDL_SB2; + else + devc->model = hw_config->card_subtype = MDL_SB201; + break; + + case 3: /* SB Pro and most clones */ + switch (devc->model) { + case 0: + devc->model = hw_config->card_subtype = MDL_SBPRO; + if (hw_config->name == NULL) + hw_config->name = "Sound Blaster Pro (8 BIT ONLY)"; + break; + case MDL_ESS: + ess_dsp_init(devc, hw_config); + break; + } + break; + + case 4: + devc->model = hw_config->card_subtype = MDL_SB16; + /* + * ALS007 and ALS100 return DSP version 4.2 and have 2 post-reset !=0 + * registers at 0x3c and 0x4c (output ctrl registers on ALS007) whereas + * a "standard" SB16 doesn't have a register at 0x4c. ALS100 actively + * updates register 0x22 whenever 0x30 changes, as per the SB16 spec. + * Since ALS007 doesn't, this can be used to differentiate the 2 cards. + */ + if ((devc->minor == 2) && sb_getmixer(devc,0x3c) && sb_getmixer(devc,0x4c)) + { + mixer30 = sb_getmixer(devc,0x30); + sb_setmixer(devc,0x22,(mixer22=sb_getmixer(devc,0x22)) & 0x0f); + sb_setmixer(devc,0x30,0xff); + /* ALS100 will force 0x30 to 0xf8 like SB16; ALS007 will allow 0xff. */ + /* Register 0x22 & 0xf0 on ALS100 == 0xf0; on ALS007 it == 0x10. */ + if ((sb_getmixer(devc,0x30) != 0xff) || ((sb_getmixer(devc,0x22) & 0xf0) != 0x10)) + { + devc->submodel = SUBMDL_ALS100; + if (hw_config->name == NULL) + hw_config->name = "Sound Blaster 16 (ALS-100)"; + } + else + { + sb_setmixer(devc,0x3c,0x1f); /* Enable all inputs */ + sb_setmixer(devc,0x4c,0x1f); + sb_setmixer(devc,0x22,mixer22); /* Restore 0x22 to original value */ + devc->submodel = SUBMDL_ALS007; + if (hw_config->name == NULL) + hw_config->name = "Sound Blaster 16 (ALS-007)"; + } + sb_setmixer(devc,0x30,mixer30); + } + else if (hw_config->name == NULL) + hw_config->name = "Sound Blaster 16"; + + if (hw_config->dma2 == -1) + devc->dma16 = devc->dma8; + else if (hw_config->dma2 < 5 || hw_config->dma2 > 7) + { + printk(KERN_WARNING "SB16: Bad or missing 16 bit DMA channel\n"); + devc->dma16 = devc->dma8; + } + else + devc->dma16 = hw_config->dma2; + + if(!sb16_set_dma_hw(devc)) { + free_irq(devc->irq, devc); + release_region(hw_config->io_base, 16); + return 0; + } + + devc->caps |= SB_NO_MIDI; + } + + if (!(devc->caps & SB_NO_MIXER)) + if (devc->major == 3 || devc->major == 4) + sb_mixer_init(devc, owner); + + if (!(devc->caps & SB_NO_MIDI)) + sb_dsp_midi_init(devc, owner); + + if (hw_config->name == NULL) + hw_config->name = "Sound Blaster (8 BIT/MONO ONLY)"; + + sprintf(name, "%s (%d.%02d)", hw_config->name, devc->major, devc->minor); + conf_printf(name, hw_config); + + /* + * Assuming that a sound card is Sound Blaster (compatible) is the most common + * configuration error and the mother of all problems. Usually sound cards + * emulate SB Pro but in addition they have a 16 bit native mode which should be + * used in Unix. See Readme.cards for more information about configuring OSS/Free + * properly. + */ + if (devc->model <= MDL_SBPRO) + { + if (devc->major == 3 && devc->minor != 1) /* "True" SB Pro should have v3.1 (rare ones may have 3.2). */ + { + printk(KERN_INFO "This sound card may not be fully Sound Blaster Pro compatible.\n"); + printk(KERN_INFO "In many cases there is another way to configure OSS so that\n"); + printk(KERN_INFO "it works properly with OSS (for example in 16 bit mode).\n"); + printk(KERN_INFO "Please ignore this message if you _really_ have a SB Pro.\n"); + } + else if (!sb_be_quiet && devc->model == MDL_SBPRO) + { + printk(KERN_INFO "SB DSP version is just %d.%02d which means that your card is\n", devc->major, devc->minor); + printk(KERN_INFO "several years old (8 bit only device) or alternatively the sound driver\n"); + printk(KERN_INFO "is incorrectly configured.\n"); + } + } + hw_config->card_subtype = devc->model; + hw_config->slots[0]=devc->dev; + last_devc = devc; /* For SB MPU detection */ + + if (!(devc->caps & SB_NO_AUDIO) && devc->dma8 >= 0) + { + if (sound_alloc_dma(devc->dma8, "SoundBlaster8")) + { + printk(KERN_WARNING "Sound Blaster: Can't allocate 8 bit DMA channel %d\n", devc->dma8); + } + if (devc->dma16 >= 0 && devc->dma16 != devc->dma8) + { + if (sound_alloc_dma(devc->dma16, "SoundBlaster16")) + printk(KERN_WARNING "Sound Blaster: can't allocate 16 bit DMA channel %d.\n", devc->dma16); + } + sb_audio_init(devc, name, owner); + hw_config->slots[0]=devc->dev; + } + else + { + MDB(printk("Sound Blaster: no audio devices found.\n")); + } + return 1; +} + +/* if (sbmpu) below we allow mpu401 to manage the midi devs + otherwise we have to unload them. (Andrzej Krzysztofowicz) */ + +void sb_dsp_unload(struct address_info *hw_config, int sbmpu) +{ + sb_devc *devc; + + devc = audio_devs[hw_config->slots[0]]->devc; + + if (devc && devc->base == hw_config->io_base) + { + if ((devc->model & MDL_ESS) && devc->pcibase) + release_region(devc->pcibase, 8); + + release_region(devc->base, 16); + + if (!(devc->caps & SB_NO_AUDIO)) + { + sound_free_dma(devc->dma8); + if (devc->dma16 >= 0) + sound_free_dma(devc->dma16); + } + if (!(devc->caps & SB_NO_AUDIO && devc->caps & SB_NO_MIDI)) + { + if (devc->irq > 0) + free_irq(devc->irq, devc); + + sb_mixer_unload(devc); + /* We don't have to do this bit any more the UART401 is its own + master -- Krzysztof Halasa */ + /* But we have to do it, if UART401 is not detected */ + if (!sbmpu) + sound_unload_mididev(devc->my_mididev); + sound_unload_audiodev(devc->dev); + } + kfree(devc); + } + else + release_region(hw_config->io_base, 16); + + kfree(detected_devc); +} + +/* + * Mixer access routines + * + * ES1887 modifications: some mixer registers reside in the + * range above 0xa0. These must be accessed in another way. + */ + +void sb_setmixer(sb_devc * devc, unsigned int port, unsigned int value) +{ + unsigned long flags; + + if (devc->model == MDL_ESS) { + ess_setmixer (devc, port, value); + return; + } + + spin_lock_irqsave(&devc->lock, flags); + + outb(((unsigned char) (port & 0xff)), MIXER_ADDR); + udelay(20); + outb(((unsigned char) (value & 0xff)), MIXER_DATA); + udelay(20); + + spin_unlock_irqrestore(&devc->lock, flags); +} + +unsigned int sb_getmixer(sb_devc * devc, unsigned int port) +{ + unsigned int val; + unsigned long flags; + + if (devc->model == MDL_ESS) return ess_getmixer (devc, port); + + spin_lock_irqsave(&devc->lock, flags); + + outb(((unsigned char) (port & 0xff)), MIXER_ADDR); + udelay(20); + val = inb(MIXER_DATA); + udelay(20); + + spin_unlock_irqrestore(&devc->lock, flags); + + return val; +} + +void sb_chgmixer + (sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val) +{ + int value; + + value = sb_getmixer(devc, reg); + value = (value & ~mask) | (val & mask); + sb_setmixer(devc, reg, value); +} + +/* + * MPU401 MIDI initialization. + */ + +static void smw_putmem(sb_devc * devc, int base, int addr, unsigned char val) +{ + unsigned long flags; + + spin_lock_irqsave(&jazz16_lock, flags); /* NOT the SB card? */ + + outb((addr & 0xff), base + 1); /* Low address bits */ + outb((addr >> 8), base + 2); /* High address bits */ + outb((val), base); /* Data */ + + spin_unlock_irqrestore(&jazz16_lock, flags); +} + +static unsigned char smw_getmem(sb_devc * devc, int base, int addr) +{ + unsigned long flags; + unsigned char val; + + spin_lock_irqsave(&jazz16_lock, flags); /* NOT the SB card? */ + + outb((addr & 0xff), base + 1); /* Low address bits */ + outb((addr >> 8), base + 2); /* High address bits */ + val = inb(base); /* Data */ + + spin_unlock_irqrestore(&jazz16_lock, flags); + return val; +} + +static int smw_midi_init(sb_devc * devc, struct address_info *hw_config) +{ + int mpu_base = hw_config->io_base; + int mp_base = mpu_base + 4; /* Microcontroller base */ + int i; + unsigned char control; + + + /* + * Reset the microcontroller so that the RAM can be accessed + */ + + control = inb(mpu_base + 7); + outb((control | 3), mpu_base + 7); /* Set last two bits to 1 (?) */ + outb(((control & 0xfe) | 2), mpu_base + 7); /* xxxxxxx0 resets the mc */ + + mdelay(3); /* Wait at least 1ms */ + + outb((control & 0xfc), mpu_base + 7); /* xxxxxx00 enables RAM */ + + /* + * Detect microcontroller by probing the 8k RAM area + */ + smw_putmem(devc, mp_base, 0, 0x00); + smw_putmem(devc, mp_base, 1, 0xff); + udelay(10); + + if (smw_getmem(devc, mp_base, 0) != 0x00 || smw_getmem(devc, mp_base, 1) != 0xff) + { + DDB(printk("SM Wave: No microcontroller RAM detected (%02x, %02x)\n", smw_getmem(devc, mp_base, 0), smw_getmem(devc, mp_base, 1))); + return 0; /* No RAM */ + } + /* + * There is RAM so assume it's really a SM Wave + */ + + devc->model = MDL_SMW; + smw_mixer_init(devc); + +#ifdef MODULE + if (!smw_ucode) + { + smw_ucodeLen = mod_firmware_load("/*(DEBLOBBED)*/", (void *) &smw_ucode); + smw_free = smw_ucode; + } +#endif + if (smw_ucodeLen > 0) + { + if (smw_ucodeLen != 8192) + { + printk(KERN_ERR "SM Wave: Invalid microcode (MIDI0001.BIN) length\n"); + return 1; + } + /* + * Download microcode + */ + + for (i = 0; i < 8192; i++) + smw_putmem(devc, mp_base, i, smw_ucode[i]); + + /* + * Verify microcode + */ + + for (i = 0; i < 8192; i++) + if (smw_getmem(devc, mp_base, i) != smw_ucode[i]) + { + printk(KERN_ERR "SM Wave: Microcode verification failed\n"); + return 0; + } + } + control = 0; +#ifdef SMW_SCSI_IRQ + /* + * Set the SCSI interrupt (IRQ2/9, IRQ3 or IRQ10). The SCSI interrupt + * is disabled by default. + * + * FIXME - make this a module option + * + * BTW the Zilog 5380 SCSI controller is located at MPU base + 0x10. + */ + { + static unsigned char scsi_irq_bits[] = { + 0, 0, 3, 1, 0, 0, 0, 0, 0, 3, 2, 0, 0, 0, 0, 0 + }; + control |= scsi_irq_bits[SMW_SCSI_IRQ] << 6; + } +#endif + +#ifdef SMW_OPL4_ENABLE + /* + * Make the OPL4 chip visible on the PC bus at 0x380. + * + * There is no need to enable this feature since this driver + * doesn't support OPL4 yet. Also there is no RAM in SM Wave so + * enabling OPL4 is pretty useless. + */ + control |= 0x10; /* Uses IRQ12 if bit 0x20 == 0 */ + /* control |= 0x20; Uncomment this if you want to use IRQ7 */ +#endif + outb((control | 0x03), mpu_base + 7); /* xxxxxx11 restarts */ + hw_config->name = "SoundMan Wave"; + return 1; +} + +static int init_Jazz16_midi(sb_devc * devc, struct address_info *hw_config) +{ + int mpu_base = hw_config->io_base; + int sb_base = devc->base; + int irq = hw_config->irq; + + unsigned char bits = 0; + unsigned long flags; + + if (irq < 0) + irq *= -1; + + if (irq < 1 || irq > 15 || + jazz_irq_bits[irq] == 0) + { + printk(KERN_ERR "Jazz16: Invalid MIDI interrupt (IRQ%d)\n", irq); + return 0; + } + switch (sb_base) + { + case 0x220: + bits = 1; + break; + case 0x240: + bits = 2; + break; + case 0x260: + bits = 3; + break; + default: + return 0; + } + bits = jazz16_bits = bits << 5; + switch (mpu_base) + { + case 0x310: + bits |= 1; + break; + case 0x320: + bits |= 2; + break; + case 0x330: + bits |= 3; + break; + default: + printk(KERN_ERR "Jazz16: Invalid MIDI I/O port %x\n", mpu_base); + return 0; + } + /* + * Magic wake up sequence by writing to 0x201 (aka Joystick port) + */ + spin_lock_irqsave(&jazz16_lock, flags); + outb(0xAF, 0x201); + outb(0x50, 0x201); + outb(bits, 0x201); + spin_unlock_irqrestore(&jazz16_lock, flags); + + hw_config->name = "Jazz16"; + smw_midi_init(devc, hw_config); + + if (!sb_dsp_command(devc, 0xfb)) + return 0; + + if (!sb_dsp_command(devc, jazz_dma_bits[devc->dma8] | + (jazz_dma_bits[devc->dma16] << 4))) + return 0; + + if (!sb_dsp_command(devc, jazz_irq_bits[devc->irq] | + (jazz_irq_bits[irq] << 4))) + return 0; + + return 1; +} + +int probe_sbmpu(struct address_info *hw_config, struct module *owner) +{ + sb_devc *devc = last_devc; + int ret; + + if (last_devc == NULL) + return 0; + + last_devc = NULL; + + if (hw_config->io_base <= 0) + { + /* The real vibra16 is fine about this, but we have to go + wipe up after Cyrix again */ + + if(devc->model == MDL_SB16 && devc->minor >= 12) + { + unsigned char bits = sb_getmixer(devc, 0x84) & ~0x06; + sb_setmixer(devc, 0x84, bits | 0x02); /* Disable MPU */ + } + return 0; + } + +#if defined(CONFIG_SOUND_MPU401) + if (devc->model == MDL_ESS) + { + struct resource *ports; + ports = request_region(hw_config->io_base, 2, "mpu401"); + if (!ports) { + printk(KERN_ERR "sbmpu: I/O port conflict (%x)\n", hw_config->io_base); + return 0; + } + if (!ess_midi_init(devc, hw_config)) { + release_region(hw_config->io_base, 2); + return 0; + } + hw_config->name = "ESS1xxx MPU"; + devc->midi_irq_cookie = NULL; + if (!probe_mpu401(hw_config, ports)) { + release_region(hw_config->io_base, 2); + return 0; + } + attach_mpu401(hw_config, owner); + if (last_sb->irq == -hw_config->irq) + last_sb->midi_irq_cookie = + (void *)(long) hw_config->slots[1]; + return 1; + } +#endif + + switch (devc->model) + { + case MDL_SB16: + if (hw_config->io_base != 0x300 && hw_config->io_base != 0x330) + { + printk(KERN_ERR "SB16: Invalid MIDI port %x\n", hw_config->io_base); + return 0; + } + hw_config->name = "Sound Blaster 16"; + if (hw_config->irq < 3 || hw_config->irq == devc->irq) + hw_config->irq = -devc->irq; + if (devc->minor > 12) /* What is Vibra's version??? */ + sb16_set_mpu_port(devc, hw_config); + break; + + case MDL_JAZZ: + if (hw_config->irq < 3 || hw_config->irq == devc->irq) + hw_config->irq = -devc->irq; + if (!init_Jazz16_midi(devc, hw_config)) + return 0; + break; + + case MDL_YMPCI: + hw_config->name = "Yamaha PCI Legacy"; + printk("Yamaha PCI legacy UART401 check.\n"); + break; + default: + return 0; + } + + ret = probe_uart401(hw_config, owner); + if (ret) + last_sb->midi_irq_cookie=midi_devs[hw_config->slots[4]]->devc; + return ret; +} + +void unload_sbmpu(struct address_info *hw_config) +{ +#if defined(CONFIG_SOUND_MPU401) + if (!strcmp (hw_config->name, "ESS1xxx MPU")) { + unload_mpu401(hw_config); + return; + } +#endif + unload_uart401(hw_config); +} + +EXPORT_SYMBOL(sb_dsp_init); +EXPORT_SYMBOL(sb_dsp_detect); +EXPORT_SYMBOL(sb_dsp_unload); +EXPORT_SYMBOL(sb_be_quiet); +EXPORT_SYMBOL(probe_sbmpu); +EXPORT_SYMBOL(unload_sbmpu); +EXPORT_SYMBOL(smw_free); +MODULE_LICENSE("GPL"); |