summaryrefslogtreecommitdiff
path: root/sound/pci/aw2/aw2-saa7146.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/pci/aw2/aw2-saa7146.c')
-rw-r--r--sound/pci/aw2/aw2-saa7146.c461
1 files changed, 461 insertions, 0 deletions
diff --git a/sound/pci/aw2/aw2-saa7146.c b/sound/pci/aw2/aw2-saa7146.c
new file mode 100644
index 000000000..1d7890459
--- /dev/null
+++ b/sound/pci/aw2/aw2-saa7146.c
@@ -0,0 +1,461 @@
+/*****************************************************************************
+ *
+ * Copyright (C) 2008 Cedric Bregardis <cedric.bregardis@free.fr> and
+ * Jean-Christian Hassler <jhassler@free.fr>
+ *
+ * This file is part of the Audiowerk2 ALSA driver
+ *
+ * The Audiowerk2 ALSA driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2.
+ *
+ * The Audiowerk2 ALSA driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Audiowerk2 ALSA driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA.
+ *
+ *****************************************************************************/
+
+#define AW2_SAA7146_M
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#include "saa7146.h"
+#include "aw2-saa7146.h"
+
+#include "aw2-tsl.c"
+
+#define WRITEREG(value, addr) writel((value), chip->base_addr + (addr))
+#define READREG(addr) readl(chip->base_addr + (addr))
+
+static struct snd_aw2_saa7146_cb_param
+ arr_substream_it_playback_cb[NB_STREAM_PLAYBACK];
+static struct snd_aw2_saa7146_cb_param
+ arr_substream_it_capture_cb[NB_STREAM_CAPTURE];
+
+static int snd_aw2_saa7146_get_limit(int size);
+
+/* chip-specific destructor */
+int snd_aw2_saa7146_free(struct snd_aw2_saa7146 *chip)
+{
+ /* disable all irqs */
+ WRITEREG(0, IER);
+
+ /* reset saa7146 */
+ WRITEREG((MRST_N << 16), MC1);
+
+ /* Unset base addr */
+ chip->base_addr = NULL;
+
+ return 0;
+}
+
+void snd_aw2_saa7146_setup(struct snd_aw2_saa7146 *chip,
+ void __iomem *pci_base_addr)
+{
+ /* set PCI burst/threshold
+
+ Burst length definition
+ VALUE BURST LENGTH
+ 000 1 Dword
+ 001 2 Dwords
+ 010 4 Dwords
+ 011 8 Dwords
+ 100 16 Dwords
+ 101 32 Dwords
+ 110 64 Dwords
+ 111 128 Dwords
+
+ Threshold definition
+ VALUE WRITE MODE READ MODE
+ 00 1 Dword of valid data 1 empty Dword
+ 01 4 Dwords of valid data 4 empty Dwords
+ 10 8 Dwords of valid data 8 empty Dwords
+ 11 16 Dwords of valid data 16 empty Dwords */
+
+ unsigned int acon2;
+ unsigned int acon1 = 0;
+ int i;
+
+ /* Set base addr */
+ chip->base_addr = pci_base_addr;
+
+ /* disable all irqs */
+ WRITEREG(0, IER);
+
+ /* reset saa7146 */
+ WRITEREG((MRST_N << 16), MC1);
+
+ /* enable audio interface */
+#ifdef __BIG_ENDIAN
+ acon1 |= A1_SWAP;
+ acon1 |= A2_SWAP;
+#endif
+ /* WS0_CTRL, WS0_SYNC: input TSL1, I2S */
+
+ /* At initialization WS1 and WS2 are disabled (configured as input) */
+ acon1 |= 0 * WS1_CTRL;
+ acon1 |= 0 * WS2_CTRL;
+
+ /* WS4 is not used. So it must not restart A2.
+ This is why it is configured as output (force to low) */
+ acon1 |= 3 * WS4_CTRL;
+
+ /* WS3_CTRL, WS3_SYNC: output TSL2, I2S */
+ acon1 |= 2 * WS3_CTRL;
+
+ /* A1 and A2 are active and asynchronous */
+ acon1 |= 3 * AUDIO_MODE;
+ WRITEREG(acon1, ACON1);
+
+ /* The following comes from original windows driver.
+ It is needed to have a correct behavior of input and output
+ simultenously, but I don't know why ! */
+ WRITEREG(3 * (BurstA1_in) + 3 * (ThreshA1_in) +
+ 3 * (BurstA1_out) + 3 * (ThreshA1_out) +
+ 3 * (BurstA2_out) + 3 * (ThreshA2_out), PCI_BT_A);
+
+ /* enable audio port pins */
+ WRITEREG((EAP << 16) | EAP, MC1);
+
+ /* enable I2C */
+ WRITEREG((EI2C << 16) | EI2C, MC1);
+ /* enable interrupts */
+ WRITEREG(A1_out | A2_out | A1_in | IIC_S | IIC_E, IER);
+
+ /* audio configuration */
+ acon2 = A2_CLKSRC | BCLK1_OEN;
+ WRITEREG(acon2, ACON2);
+
+ /* By default use analog input */
+ snd_aw2_saa7146_use_digital_input(chip, 0);
+
+ /* TSL setup */
+ for (i = 0; i < 8; ++i) {
+ WRITEREG(tsl1[i], TSL1 + (i * 4));
+ WRITEREG(tsl2[i], TSL2 + (i * 4));
+ }
+
+}
+
+void snd_aw2_saa7146_pcm_init_playback(struct snd_aw2_saa7146 *chip,
+ int stream_number,
+ unsigned long dma_addr,
+ unsigned long period_size,
+ unsigned long buffer_size)
+{
+ unsigned long dw_page, dw_limit;
+
+ /* Configure DMA for substream
+ Configuration informations: ALSA has allocated continuous memory
+ pages. So we don't need to use MMU of saa7146.
+ */
+
+ /* No MMU -> nothing to do with PageA1, we only configure the limit of
+ PageAx_out register */
+ /* Disable MMU */
+ dw_page = (0L << 11);
+
+ /* Configure Limit for DMA access.
+ The limit register defines an address limit, which generates
+ an interrupt if passed by the actual PCI address pointer.
+ '0001' means an interrupt will be generated if the lower
+ 6 bits (64 bytes) of the PCI address are zero. '0010'
+ defines a limit of 128 bytes, '0011' one of 256 bytes, and
+ so on up to 1 Mbyte defined by '1111'. This interrupt range
+ can be calculated as follows:
+ Range = 2^(5 + Limit) bytes.
+ */
+ dw_limit = snd_aw2_saa7146_get_limit(period_size);
+ dw_page |= (dw_limit << 4);
+
+ if (stream_number == 0) {
+ WRITEREG(dw_page, PageA2_out);
+
+ /* Base address for DMA transfert. */
+ /* This address has been reserved by ALSA. */
+ /* This is a physical address */
+ WRITEREG(dma_addr, BaseA2_out);
+
+ /* Define upper limit for DMA access */
+ WRITEREG(dma_addr + buffer_size, ProtA2_out);
+
+ } else if (stream_number == 1) {
+ WRITEREG(dw_page, PageA1_out);
+
+ /* Base address for DMA transfert. */
+ /* This address has been reserved by ALSA. */
+ /* This is a physical address */
+ WRITEREG(dma_addr, BaseA1_out);
+
+ /* Define upper limit for DMA access */
+ WRITEREG(dma_addr + buffer_size, ProtA1_out);
+ } else {
+ pr_err("aw2: snd_aw2_saa7146_pcm_init_playback: "
+ "Substream number is not 0 or 1 -> not managed\n");
+ }
+}
+
+void snd_aw2_saa7146_pcm_init_capture(struct snd_aw2_saa7146 *chip,
+ int stream_number, unsigned long dma_addr,
+ unsigned long period_size,
+ unsigned long buffer_size)
+{
+ unsigned long dw_page, dw_limit;
+
+ /* Configure DMA for substream
+ Configuration informations: ALSA has allocated continuous memory
+ pages. So we don't need to use MMU of saa7146.
+ */
+
+ /* No MMU -> nothing to do with PageA1, we only configure the limit of
+ PageAx_out register */
+ /* Disable MMU */
+ dw_page = (0L << 11);
+
+ /* Configure Limit for DMA access.
+ The limit register defines an address limit, which generates
+ an interrupt if passed by the actual PCI address pointer.
+ '0001' means an interrupt will be generated if the lower
+ 6 bits (64 bytes) of the PCI address are zero. '0010'
+ defines a limit of 128 bytes, '0011' one of 256 bytes, and
+ so on up to 1 Mbyte defined by '1111'. This interrupt range
+ can be calculated as follows:
+ Range = 2^(5 + Limit) bytes.
+ */
+ dw_limit = snd_aw2_saa7146_get_limit(period_size);
+ dw_page |= (dw_limit << 4);
+
+ if (stream_number == 0) {
+ WRITEREG(dw_page, PageA1_in);
+
+ /* Base address for DMA transfert. */
+ /* This address has been reserved by ALSA. */
+ /* This is a physical address */
+ WRITEREG(dma_addr, BaseA1_in);
+
+ /* Define upper limit for DMA access */
+ WRITEREG(dma_addr + buffer_size, ProtA1_in);
+ } else {
+ pr_err("aw2: snd_aw2_saa7146_pcm_init_capture: "
+ "Substream number is not 0 -> not managed\n");
+ }
+}
+
+void snd_aw2_saa7146_define_it_playback_callback(unsigned int stream_number,
+ snd_aw2_saa7146_it_cb
+ p_it_callback,
+ void *p_callback_param)
+{
+ if (stream_number < NB_STREAM_PLAYBACK) {
+ arr_substream_it_playback_cb[stream_number].p_it_callback =
+ (snd_aw2_saa7146_it_cb) p_it_callback;
+ arr_substream_it_playback_cb[stream_number].p_callback_param =
+ (void *)p_callback_param;
+ }
+}
+
+void snd_aw2_saa7146_define_it_capture_callback(unsigned int stream_number,
+ snd_aw2_saa7146_it_cb
+ p_it_callback,
+ void *p_callback_param)
+{
+ if (stream_number < NB_STREAM_CAPTURE) {
+ arr_substream_it_capture_cb[stream_number].p_it_callback =
+ (snd_aw2_saa7146_it_cb) p_it_callback;
+ arr_substream_it_capture_cb[stream_number].p_callback_param =
+ (void *)p_callback_param;
+ }
+}
+
+void snd_aw2_saa7146_pcm_trigger_start_playback(struct snd_aw2_saa7146 *chip,
+ int stream_number)
+{
+ unsigned int acon1 = 0;
+ /* In aw8 driver, dma transfert is always active. It is
+ started and stopped in a larger "space" */
+ acon1 = READREG(ACON1);
+ if (stream_number == 0) {
+ WRITEREG((TR_E_A2_OUT << 16) | TR_E_A2_OUT, MC1);
+
+ /* WS2_CTRL, WS2_SYNC: output TSL2, I2S */
+ acon1 |= 2 * WS2_CTRL;
+ WRITEREG(acon1, ACON1);
+
+ } else if (stream_number == 1) {
+ WRITEREG((TR_E_A1_OUT << 16) | TR_E_A1_OUT, MC1);
+
+ /* WS1_CTRL, WS1_SYNC: output TSL1, I2S */
+ acon1 |= 1 * WS1_CTRL;
+ WRITEREG(acon1, ACON1);
+ }
+}
+
+void snd_aw2_saa7146_pcm_trigger_stop_playback(struct snd_aw2_saa7146 *chip,
+ int stream_number)
+{
+ unsigned int acon1 = 0;
+ acon1 = READREG(ACON1);
+ if (stream_number == 0) {
+ /* WS2_CTRL, WS2_SYNC: output TSL2, I2S */
+ acon1 &= ~(3 * WS2_CTRL);
+ WRITEREG(acon1, ACON1);
+
+ WRITEREG((TR_E_A2_OUT << 16), MC1);
+ } else if (stream_number == 1) {
+ /* WS1_CTRL, WS1_SYNC: output TSL1, I2S */
+ acon1 &= ~(3 * WS1_CTRL);
+ WRITEREG(acon1, ACON1);
+
+ WRITEREG((TR_E_A1_OUT << 16), MC1);
+ }
+}
+
+void snd_aw2_saa7146_pcm_trigger_start_capture(struct snd_aw2_saa7146 *chip,
+ int stream_number)
+{
+ /* In aw8 driver, dma transfert is always active. It is
+ started and stopped in a larger "space" */
+ if (stream_number == 0)
+ WRITEREG((TR_E_A1_IN << 16) | TR_E_A1_IN, MC1);
+}
+
+void snd_aw2_saa7146_pcm_trigger_stop_capture(struct snd_aw2_saa7146 *chip,
+ int stream_number)
+{
+ if (stream_number == 0)
+ WRITEREG((TR_E_A1_IN << 16), MC1);
+}
+
+irqreturn_t snd_aw2_saa7146_interrupt(int irq, void *dev_id)
+{
+ unsigned int isr;
+ unsigned int iicsta;
+ struct snd_aw2_saa7146 *chip = dev_id;
+
+ isr = READREG(ISR);
+ if (!isr)
+ return IRQ_NONE;
+
+ WRITEREG(isr, ISR);
+
+ if (isr & (IIC_S | IIC_E)) {
+ iicsta = READREG(IICSTA);
+ WRITEREG(0x100, IICSTA);
+ }
+
+ if (isr & A1_out) {
+ if (arr_substream_it_playback_cb[1].p_it_callback != NULL) {
+ arr_substream_it_playback_cb[1].
+ p_it_callback(arr_substream_it_playback_cb[1].
+ p_callback_param);
+ }
+ }
+ if (isr & A2_out) {
+ if (arr_substream_it_playback_cb[0].p_it_callback != NULL) {
+ arr_substream_it_playback_cb[0].
+ p_it_callback(arr_substream_it_playback_cb[0].
+ p_callback_param);
+ }
+
+ }
+ if (isr & A1_in) {
+ if (arr_substream_it_capture_cb[0].p_it_callback != NULL) {
+ arr_substream_it_capture_cb[0].
+ p_it_callback(arr_substream_it_capture_cb[0].
+ p_callback_param);
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+unsigned int snd_aw2_saa7146_get_hw_ptr_playback(struct snd_aw2_saa7146 *chip,
+ int stream_number,
+ unsigned char *start_addr,
+ unsigned int buffer_size)
+{
+ long pci_adp = 0;
+ size_t ptr = 0;
+
+ if (stream_number == 0) {
+ pci_adp = READREG(PCI_ADP3);
+ ptr = pci_adp - (long)start_addr;
+
+ if (ptr == buffer_size)
+ ptr = 0;
+ }
+ if (stream_number == 1) {
+ pci_adp = READREG(PCI_ADP1);
+ ptr = pci_adp - (size_t) start_addr;
+
+ if (ptr == buffer_size)
+ ptr = 0;
+ }
+ return ptr;
+}
+
+unsigned int snd_aw2_saa7146_get_hw_ptr_capture(struct snd_aw2_saa7146 *chip,
+ int stream_number,
+ unsigned char *start_addr,
+ unsigned int buffer_size)
+{
+ size_t pci_adp = 0;
+ size_t ptr = 0;
+ if (stream_number == 0) {
+ pci_adp = READREG(PCI_ADP2);
+ ptr = pci_adp - (size_t) start_addr;
+
+ if (ptr == buffer_size)
+ ptr = 0;
+ }
+ return ptr;
+}
+
+void snd_aw2_saa7146_use_digital_input(struct snd_aw2_saa7146 *chip,
+ int use_digital)
+{
+ /* FIXME: switch between analog and digital input does not always work.
+ It can produce a kind of white noise. It seams that received data
+ are inverted sometime (endian inversion). Why ? I don't know, maybe
+ a problem of synchronization... However for the time being I have
+ not found the problem. Workaround: switch again (and again) between
+ digital and analog input until it works. */
+ if (use_digital)
+ WRITEREG(0x40, GPIO_CTRL);
+ else
+ WRITEREG(0x50, GPIO_CTRL);
+}
+
+int snd_aw2_saa7146_is_using_digital_input(struct snd_aw2_saa7146 *chip)
+{
+ unsigned int reg_val = READREG(GPIO_CTRL);
+ if ((reg_val & 0xFF) == 0x40)
+ return 1;
+ else
+ return 0;
+}
+
+
+static int snd_aw2_saa7146_get_limit(int size)
+{
+ int limitsize = 32;
+ int limit = 0;
+ while (limitsize < size) {
+ limitsize *= 2;
+ limit++;
+ }
+ return limit;
+}