summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/nau8825.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/nau8825.c')
-rw-r--r--sound/soc/codecs/nau8825.c295
1 files changed, 197 insertions, 98 deletions
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c
index c1b87c580..683769f0f 100644
--- a/sound/soc/codecs/nau8825.c
+++ b/sound/soc/codecs/nau8825.c
@@ -84,6 +84,7 @@ static const struct nau8825_fll_attr fll_pre_scalar[] = {
static const struct reg_default nau8825_reg_defaults[] = {
{ NAU8825_REG_ENA_CTRL, 0x00ff },
+ { NAU8825_REG_IIC_ADDR_SET, 0x0 },
{ NAU8825_REG_CLK_DIVIDER, 0x0050 },
{ NAU8825_REG_FLL1, 0x0 },
{ NAU8825_REG_FLL2, 0x3126 },
@@ -158,8 +159,7 @@ static const struct reg_default nau8825_reg_defaults[] = {
static bool nau8825_readable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
- case NAU8825_REG_ENA_CTRL:
- case NAU8825_REG_CLK_DIVIDER ... NAU8825_REG_FLL_VCO_RSV:
+ case NAU8825_REG_ENA_CTRL ... NAU8825_REG_FLL_VCO_RSV:
case NAU8825_REG_HSD_CTRL ... NAU8825_REG_JACK_DET_CTRL:
case NAU8825_REG_INTERRUPT_MASK ... NAU8825_REG_KEYDET_CTRL:
case NAU8825_REG_VDET_THRESHOLD_1 ... NAU8825_REG_DACR_CTRL:
@@ -184,8 +184,7 @@ static bool nau8825_readable_reg(struct device *dev, unsigned int reg)
static bool nau8825_writeable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
- case NAU8825_REG_RESET ... NAU8825_REG_ENA_CTRL:
- case NAU8825_REG_CLK_DIVIDER ... NAU8825_REG_FLL_VCO_RSV:
+ case NAU8825_REG_RESET ... NAU8825_REG_FLL_VCO_RSV:
case NAU8825_REG_HSD_CTRL ... NAU8825_REG_JACK_DET_CTRL:
case NAU8825_REG_INTERRUPT_MASK:
case NAU8825_REG_INT_CLR_KEY_STATUS ... NAU8825_REG_KEYDET_CTRL:
@@ -227,10 +226,42 @@ static bool nau8825_volatile_reg(struct device *dev, unsigned int reg)
static int nau8825_pump_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
+ struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+ struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec);
+
switch (event) {
case SND_SOC_DAPM_POST_PMU:
/* Prevent startup click by letting charge pump to ramp up */
msleep(10);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_JAMNODCLOW, NAU8825_JAMNODCLOW);
+ break;
+ case SND_SOC_DAPM_PRE_PMD:
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_JAMNODCLOW, 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int nau8825_output_dac_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+ struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec);
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ /* Disables the TESTDAC to let DAC signal pass through. */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
+ NAU8825_BIAS_TESTDAC_EN, 0);
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
+ NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN);
break;
default:
return -EINVAL;
@@ -312,14 +343,17 @@ static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = {
SND_SOC_DAPM_SUPPLY("ADC Power", NAU8825_REG_ANALOG_ADC_2, 6, 0, NULL,
0),
- /* ADC for button press detection */
- SND_SOC_DAPM_ADC("SAR", NULL, NAU8825_REG_SAR_CTRL,
- NAU8825_SAR_ADC_EN_SFT, 0),
+ /* ADC for button press detection. A dapm supply widget is used to
+ * prevent dapm_power_widgets keeping the codec at SND_SOC_BIAS_ON
+ * during suspend.
+ */
+ SND_SOC_DAPM_SUPPLY("SAR", NAU8825_REG_SAR_CTRL,
+ NAU8825_SAR_ADC_EN_SFT, 0, NULL, 0),
- SND_SOC_DAPM_DAC("ADACL", NULL, NAU8825_REG_RDAC, 12, 0),
- SND_SOC_DAPM_DAC("ADACR", NULL, NAU8825_REG_RDAC, 13, 0),
- SND_SOC_DAPM_SUPPLY("ADACL Clock", NAU8825_REG_RDAC, 8, 0, NULL, 0),
- SND_SOC_DAPM_SUPPLY("ADACR Clock", NAU8825_REG_RDAC, 9, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_S("ADACL", 2, NAU8825_REG_RDAC, 12, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_S("ADACR", 2, NAU8825_REG_RDAC, 13, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_S("ADACL Clock", 3, NAU8825_REG_RDAC, 8, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_S("ADACR Clock", 3, NAU8825_REG_RDAC, 9, 0, NULL, 0),
SND_SOC_DAPM_DAC("DDACR", NULL, NAU8825_REG_ENA_CTRL,
NAU8825_ENABLE_DACR_SFT, 0),
@@ -330,29 +364,48 @@ static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = {
SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &nau8825_dacl_mux),
SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &nau8825_dacr_mux),
- SND_SOC_DAPM_PGA("HP amp L", NAU8825_REG_CLASSG_CTRL, 1, 0, NULL, 0),
- SND_SOC_DAPM_PGA("HP amp R", NAU8825_REG_CLASSG_CTRL, 2, 0, NULL, 0),
- SND_SOC_DAPM_SUPPLY("HP amp power", NAU8825_REG_CLASSG_CTRL, 0, 0, NULL,
- 0),
+ SND_SOC_DAPM_PGA_S("HP amp L", 0,
+ NAU8825_REG_CLASSG_CTRL, 1, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_S("HP amp R", 0,
+ NAU8825_REG_CLASSG_CTRL, 2, 0, NULL, 0),
- SND_SOC_DAPM_SUPPLY("Charge Pump", NAU8825_REG_CHARGE_PUMP, 5, 0,
- nau8825_pump_event, SND_SOC_DAPM_POST_PMU),
+ SND_SOC_DAPM_PGA_S("Charge Pump", 1, NAU8825_REG_CHARGE_PUMP, 5, 0,
+ nau8825_pump_event, SND_SOC_DAPM_POST_PMU |
+ SND_SOC_DAPM_PRE_PMD),
- SND_SOC_DAPM_PGA("Output Driver R Stage 1",
+ SND_SOC_DAPM_PGA_S("Output Driver R Stage 1", 4,
NAU8825_REG_POWER_UP_CONTROL, 5, 0, NULL, 0),
- SND_SOC_DAPM_PGA("Output Driver L Stage 1",
+ SND_SOC_DAPM_PGA_S("Output Driver L Stage 1", 4,
NAU8825_REG_POWER_UP_CONTROL, 4, 0, NULL, 0),
- SND_SOC_DAPM_PGA("Output Driver R Stage 2",
+ SND_SOC_DAPM_PGA_S("Output Driver R Stage 2", 5,
NAU8825_REG_POWER_UP_CONTROL, 3, 0, NULL, 0),
- SND_SOC_DAPM_PGA("Output Driver L Stage 2",
+ SND_SOC_DAPM_PGA_S("Output Driver L Stage 2", 5,
NAU8825_REG_POWER_UP_CONTROL, 2, 0, NULL, 0),
- SND_SOC_DAPM_PGA_S("Output Driver R Stage 3", 1,
+ SND_SOC_DAPM_PGA_S("Output Driver R Stage 3", 6,
NAU8825_REG_POWER_UP_CONTROL, 1, 0, NULL, 0),
- SND_SOC_DAPM_PGA_S("Output Driver L Stage 3", 1,
+ SND_SOC_DAPM_PGA_S("Output Driver L Stage 3", 6,
NAU8825_REG_POWER_UP_CONTROL, 0, 0, NULL, 0),
- SND_SOC_DAPM_PGA_S("Output DACL", 2, NAU8825_REG_CHARGE_PUMP, 8, 1, NULL, 0),
- SND_SOC_DAPM_PGA_S("Output DACR", 2, NAU8825_REG_CHARGE_PUMP, 9, 1, NULL, 0),
+ SND_SOC_DAPM_PGA_S("Output DACL", 7,
+ NAU8825_REG_CHARGE_PUMP, 8, 1, nau8825_output_dac_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_PGA_S("Output DACR", 7,
+ NAU8825_REG_CHARGE_PUMP, 9, 1, nau8825_output_dac_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+
+ /* HPOL/R are ungrounded by disabling 16 Ohm pull-downs on playback */
+ SND_SOC_DAPM_PGA_S("HPOL Pulldown", 8,
+ NAU8825_REG_HSD_CTRL, 0, 1, NULL, 0),
+ SND_SOC_DAPM_PGA_S("HPOR Pulldown", 8,
+ NAU8825_REG_HSD_CTRL, 1, 1, NULL, 0),
+
+ /* High current HPOL/R boost driver */
+ SND_SOC_DAPM_PGA_S("HP Boost Driver", 9,
+ NAU8825_REG_BOOST, 9, 1, NULL, 0),
+
+ /* Class G operation control*/
+ SND_SOC_DAPM_PGA_S("Class G", 10,
+ NAU8825_REG_CLASSG_CTRL, 0, 0, NULL, 0),
SND_SOC_DAPM_OUTPUT("HPOL"),
SND_SOC_DAPM_OUTPUT("HPOR"),
@@ -375,24 +428,27 @@ static const struct snd_soc_dapm_route nau8825_dapm_routes[] = {
{"DACR Mux", "DACR", "DDACR"},
{"HP amp L", NULL, "DACL Mux"},
{"HP amp R", NULL, "DACR Mux"},
- {"HP amp L", NULL, "HP amp power"},
- {"HP amp R", NULL, "HP amp power"},
- {"ADACL", NULL, "HP amp L"},
- {"ADACR", NULL, "HP amp R"},
- {"ADACL", NULL, "ADACL Clock"},
- {"ADACR", NULL, "ADACR Clock"},
- {"Output Driver L Stage 1", NULL, "ADACL"},
- {"Output Driver R Stage 1", NULL, "ADACR"},
+ {"Charge Pump", NULL, "HP amp L"},
+ {"Charge Pump", NULL, "HP amp R"},
+ {"ADACL", NULL, "Charge Pump"},
+ {"ADACR", NULL, "Charge Pump"},
+ {"ADACL Clock", NULL, "ADACL"},
+ {"ADACR Clock", NULL, "ADACR"},
+ {"Output Driver L Stage 1", NULL, "ADACL Clock"},
+ {"Output Driver R Stage 1", NULL, "ADACR Clock"},
{"Output Driver L Stage 2", NULL, "Output Driver L Stage 1"},
{"Output Driver R Stage 2", NULL, "Output Driver R Stage 1"},
{"Output Driver L Stage 3", NULL, "Output Driver L Stage 2"},
{"Output Driver R Stage 3", NULL, "Output Driver R Stage 2"},
{"Output DACL", NULL, "Output Driver L Stage 3"},
{"Output DACR", NULL, "Output Driver R Stage 3"},
- {"HPOL", NULL, "Output DACL"},
- {"HPOR", NULL, "Output DACR"},
- {"HPOL", NULL, "Charge Pump"},
- {"HPOR", NULL, "Charge Pump"},
+ {"HPOL Pulldown", NULL, "Output DACL"},
+ {"HPOR Pulldown", NULL, "Output DACR"},
+ {"HP Boost Driver", NULL, "HPOL Pulldown"},
+ {"HP Boost Driver", NULL, "HPOR Pulldown"},
+ {"Class G", NULL, "HP Boost Driver"},
+ {"HPOL", NULL, "Class G"},
+ {"HPOR", NULL, "Class G"},
};
static int nau8825_hw_params(struct snd_pcm_substream *substream,
@@ -554,6 +610,16 @@ static bool nau8825_is_jack_inserted(struct regmap *regmap)
static void nau8825_restart_jack_detection(struct regmap *regmap)
{
+ /* Chip needs one FSCLK cycle in order to generate interrupts,
+ * as we cannot guarantee one will be provided by the system. Turning
+ * master mode on then off enables us to generate that FSCLK cycle
+ * with a minimum of contention on the clock bus.
+ */
+ regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
+ NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER);
+ regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
+ NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE);
+
/* this will restart the entire jack detection process including MIC/GND
* switching and create interrupts. We have to go from 0 to 1 and back
* to 0 to restart.
@@ -659,11 +725,10 @@ static int nau8825_jack_insert(struct nau8825 *nau8825)
break;
}
- if (type & SND_JACK_HEADPHONE) {
- /* Unground HPL/R */
- regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 0x3, 0);
- }
-
+ /* Leaving HPOL/R grounded after jack insert by default. They will be
+ * ungrounded as part of the widget power up sequence at the beginning
+ * of playback to reduce pop.
+ */
return type;
}
@@ -676,7 +741,10 @@ static irqreturn_t nau8825_interrupt(int irq, void *data)
struct regmap *regmap = nau8825->regmap;
int active_irq, clear_irq = 0, event = 0, event_mask = 0;
- regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq);
+ if (regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq)) {
+ dev_err(nau8825->dev, "failed to read irq status\n");
+ return IRQ_NONE;
+ }
if ((active_irq & NAU8825_JACK_EJECTION_IRQ_MASK) ==
NAU8825_JACK_EJECTION_DETECTED) {
@@ -768,6 +836,8 @@ static void nau8825_init_regs(struct nau8825 *nau8825)
{
struct regmap *regmap = nau8825->regmap;
+ /* Latch IIC LSB value */
+ regmap_write(regmap, NAU8825_REG_IIC_ADDR_SET, 0x0001);
/* Enable Bias/Vmid */
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
NAU8825_BIAS_VMID, NAU8825_BIAS_VMID);
@@ -780,10 +850,10 @@ static void nau8825_init_regs(struct nau8825 *nau8825)
nau8825->vref_impedance << NAU8825_BIAS_VMID_SEL_SFT);
/* Disable Boost Driver, Automatic Short circuit protection enable */
regmap_update_bits(regmap, NAU8825_REG_BOOST,
- NAU8825_PRECHARGE_DIS | NAU8825_HP_BOOST_G_DIS |
- NAU8825_SHORT_SHUTDOWN_EN,
- NAU8825_PRECHARGE_DIS | NAU8825_HP_BOOST_G_DIS |
- NAU8825_SHORT_SHUTDOWN_EN);
+ NAU8825_PRECHARGE_DIS | NAU8825_HP_BOOST_DIS |
+ NAU8825_HP_BOOST_G_DIS | NAU8825_SHORT_SHUTDOWN_EN,
+ NAU8825_PRECHARGE_DIS | NAU8825_HP_BOOST_DIS |
+ NAU8825_HP_BOOST_G_DIS | NAU8825_SHORT_SHUTDOWN_EN);
regmap_update_bits(regmap, NAU8825_REG_GPIO12_CTRL,
NAU8825_JKDET_OUTPUT_EN,
@@ -822,6 +892,35 @@ static void nau8825_init_regs(struct nau8825 *nau8825)
NAU8825_ADC_SYNC_DOWN_MASK, NAU8825_ADC_SYNC_DOWN_128);
regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1,
NAU8825_DAC_OVERSAMPLE_MASK, NAU8825_DAC_OVERSAMPLE_128);
+ /* Disable DACR/L power */
+ regmap_update_bits(regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL,
+ NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL);
+ /* Enable TESTDAC. This sets the analog DAC inputs to a '0' input
+ * signal to avoid any glitches due to power up transients in both
+ * the analog and digital DAC circuit.
+ */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
+ NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN);
+ /* CICCLP off */
+ regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1,
+ NAU8825_DAC_CLIP_OFF, NAU8825_DAC_CLIP_OFF);
+
+ /* Class AB bias current to 2x, DAC Capacitor enable MSB/LSB */
+ regmap_update_bits(regmap, NAU8825_REG_ANALOG_CONTROL_2,
+ NAU8825_HP_NON_CLASSG_CURRENT_2xADJ |
+ NAU8825_DAC_CAPACITOR_MSB | NAU8825_DAC_CAPACITOR_LSB,
+ NAU8825_HP_NON_CLASSG_CURRENT_2xADJ |
+ NAU8825_DAC_CAPACITOR_MSB | NAU8825_DAC_CAPACITOR_LSB);
+ /* Class G timer 64ms */
+ regmap_update_bits(regmap, NAU8825_REG_CLASSG_CTRL,
+ NAU8825_CLASSG_TIMER_MASK,
+ 0x20 << NAU8825_CLASSG_TIMER_SFT);
+ /* DAC clock delay 2ns, VREF */
+ regmap_update_bits(regmap, NAU8825_REG_RDAC,
+ NAU8825_RDAC_CLK_DELAY_MASK | NAU8825_RDAC_VREF_MASK,
+ (0x2 << NAU8825_RDAC_CLK_DELAY_SFT) |
+ (0x3 << NAU8825_RDAC_VREF_SFT));
}
static const struct regmap_config nau8825_regmap_config = {
@@ -1058,33 +1157,74 @@ static int nau8825_set_bias_level(struct snd_soc_codec *codec,
return ret;
}
}
-
- ret = regcache_sync(nau8825->regmap);
- if (ret) {
- dev_err(codec->dev,
- "Failed to sync cache: %d\n", ret);
- return ret;
- }
}
-
break;
case SND_SOC_BIAS_OFF:
if (nau8825->mclk_freq)
clk_disable_unprepare(nau8825->mclk);
-
- regcache_mark_dirty(nau8825->regmap);
break;
}
return 0;
}
+#ifdef CONFIG_PM
+static int nau8825_suspend(struct snd_soc_codec *codec)
+{
+ struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec);
+
+ disable_irq(nau8825->irq);
+ regcache_cache_only(nau8825->regmap, true);
+ regcache_mark_dirty(nau8825->regmap);
+
+ return 0;
+}
+
+static int nau8825_resume(struct snd_soc_codec *codec)
+{
+ struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec);
+
+ /* The chip may lose power and reset in S3. regcache_sync restores
+ * register values including configurations for sysclk, irq, and
+ * jack/button detection.
+ */
+ regcache_cache_only(nau8825->regmap, false);
+ regcache_sync(nau8825->regmap);
+
+ /* Check the jack plug status directly. If the headset is unplugged
+ * during S3 when the chip has no power, there will be no jack
+ * detection irq even after the nau8825_restart_jack_detection below,
+ * because the chip just thinks no headset has ever been plugged in.
+ */
+ if (!nau8825_is_jack_inserted(nau8825->regmap)) {
+ nau8825_eject_jack(nau8825);
+ snd_soc_jack_report(nau8825->jack, 0, SND_JACK_HEADSET);
+ }
+
+ enable_irq(nau8825->irq);
+
+ /* Run jack detection to check the type (OMTP or CTIA) of the headset
+ * if there is one. This handles the case where a different type of
+ * headset is plugged in during S3. This triggers an IRQ iff a headset
+ * is already plugged in.
+ */
+ nau8825_restart_jack_detection(nau8825->regmap);
+
+ return 0;
+}
+#else
+#define nau8825_suspend NULL
+#define nau8825_resume NULL
+#endif
+
static struct snd_soc_codec_driver nau8825_codec_driver = {
.probe = nau8825_codec_probe,
.set_sysclk = nau8825_set_sysclk,
.set_pll = nau8825_set_pll,
.set_bias_level = nau8825_set_bias_level,
.suspend_bias_off = true,
+ .suspend = nau8825_suspend,
+ .resume = nau8825_resume,
.controls = nau8825_controls,
.num_controls = ARRAY_SIZE(nau8825_controls),
@@ -1194,16 +1334,6 @@ static int nau8825_setup_irq(struct nau8825 *nau8825)
regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL,
NAU8825_ENABLE_DACR, NAU8825_ENABLE_DACR);
- /* Chip needs one FSCLK cycle in order to generate interrupts,
- * as we cannot guarantee one will be provided by the system. Turning
- * master mode on then off enables us to generate that FSCLK cycle
- * with a minimum of contention on the clock bus.
- */
- regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
- NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER);
- regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
- NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE);
-
ret = devm_request_threaded_irq(nau8825->dev, nau8825->irq, NULL,
nau8825_interrupt, IRQF_TRIGGER_LOW | IRQF_ONESHOT,
"nau8825", nau8825);
@@ -1271,36 +1401,6 @@ static int nau8825_i2c_remove(struct i2c_client *client)
return 0;
}
-#ifdef CONFIG_PM_SLEEP
-static int nau8825_suspend(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct nau8825 *nau8825 = dev_get_drvdata(dev);
-
- disable_irq(client->irq);
- regcache_cache_only(nau8825->regmap, true);
- regcache_mark_dirty(nau8825->regmap);
-
- return 0;
-}
-
-static int nau8825_resume(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct nau8825 *nau8825 = dev_get_drvdata(dev);
-
- regcache_cache_only(nau8825->regmap, false);
- regcache_sync(nau8825->regmap);
- enable_irq(client->irq);
-
- return 0;
-}
-#endif
-
-static const struct dev_pm_ops nau8825_pm = {
- SET_SYSTEM_SLEEP_PM_OPS(nau8825_suspend, nau8825_resume)
-};
-
static const struct i2c_device_id nau8825_i2c_ids[] = {
{ "nau8825", 0 },
{ }
@@ -1327,7 +1427,6 @@ static struct i2c_driver nau8825_driver = {
.name = "nau8825",
.of_match_table = of_match_ptr(nau8825_of_ids),
.acpi_match_table = ACPI_PTR(nau8825_acpi_match),
- .pm = &nau8825_pm,
},
.probe = nau8825_i2c_probe,
.remove = nau8825_i2c_remove,