summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/wm8904.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/wm8904.c')
-rw-r--r--sound/soc/codecs/wm8904.c2308
1 files changed, 2308 insertions, 0 deletions
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
new file mode 100644
index 000000000..215e93c1d
--- /dev/null
+++ b/sound/soc/codecs/wm8904.c
@@ -0,0 +1,2308 @@
+/*
+ * wm8904.c -- WM8904 ALSA SoC Audio driver
+ *
+ * Copyright 2009-12 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+#include <sound/wm8904.h>
+
+#include "wm8904.h"
+
+enum wm8904_type {
+ WM8904,
+ WM8912,
+};
+
+#define WM8904_NUM_DCS_CHANNELS 4
+
+#define WM8904_NUM_SUPPLIES 5
+static const char *wm8904_supply_names[WM8904_NUM_SUPPLIES] = {
+ "DCVDD",
+ "DBVDD",
+ "AVDD",
+ "CPVDD",
+ "MICVDD",
+};
+
+/* codec private data */
+struct wm8904_priv {
+ struct regmap *regmap;
+ struct clk *mclk;
+
+ enum wm8904_type devtype;
+
+ struct regulator_bulk_data supplies[WM8904_NUM_SUPPLIES];
+
+ struct wm8904_pdata *pdata;
+
+ int deemph;
+
+ /* Platform provided DRC configuration */
+ const char **drc_texts;
+ int drc_cfg;
+ struct soc_enum drc_enum;
+
+ /* Platform provided ReTune mobile configuration */
+ int num_retune_mobile_texts;
+ const char **retune_mobile_texts;
+ int retune_mobile_cfg;
+ struct soc_enum retune_mobile_enum;
+
+ /* FLL setup */
+ int fll_src;
+ int fll_fref;
+ int fll_fout;
+
+ /* Clocking configuration */
+ unsigned int mclk_rate;
+ int sysclk_src;
+ unsigned int sysclk_rate;
+
+ int tdm_width;
+ int tdm_slots;
+ int bclk;
+ int fs;
+
+ /* DC servo configuration - cached offset values */
+ int dcs_state[WM8904_NUM_DCS_CHANNELS];
+};
+
+static const struct reg_default wm8904_reg_defaults[] = {
+ { 4, 0x0018 }, /* R4 - Bias Control 0 */
+ { 5, 0x0000 }, /* R5 - VMID Control 0 */
+ { 6, 0x0000 }, /* R6 - Mic Bias Control 0 */
+ { 7, 0x0000 }, /* R7 - Mic Bias Control 1 */
+ { 8, 0x0001 }, /* R8 - Analogue DAC 0 */
+ { 9, 0x9696 }, /* R9 - mic Filter Control */
+ { 10, 0x0001 }, /* R10 - Analogue ADC 0 */
+ { 12, 0x0000 }, /* R12 - Power Management 0 */
+ { 14, 0x0000 }, /* R14 - Power Management 2 */
+ { 15, 0x0000 }, /* R15 - Power Management 3 */
+ { 18, 0x0000 }, /* R18 - Power Management 6 */
+ { 20, 0x945E }, /* R20 - Clock Rates 0 */
+ { 21, 0x0C05 }, /* R21 - Clock Rates 1 */
+ { 22, 0x0006 }, /* R22 - Clock Rates 2 */
+ { 24, 0x0050 }, /* R24 - Audio Interface 0 */
+ { 25, 0x000A }, /* R25 - Audio Interface 1 */
+ { 26, 0x00E4 }, /* R26 - Audio Interface 2 */
+ { 27, 0x0040 }, /* R27 - Audio Interface 3 */
+ { 30, 0x00C0 }, /* R30 - DAC Digital Volume Left */
+ { 31, 0x00C0 }, /* R31 - DAC Digital Volume Right */
+ { 32, 0x0000 }, /* R32 - DAC Digital 0 */
+ { 33, 0x0008 }, /* R33 - DAC Digital 1 */
+ { 36, 0x00C0 }, /* R36 - ADC Digital Volume Left */
+ { 37, 0x00C0 }, /* R37 - ADC Digital Volume Right */
+ { 38, 0x0010 }, /* R38 - ADC Digital 0 */
+ { 39, 0x0000 }, /* R39 - Digital Microphone 0 */
+ { 40, 0x01AF }, /* R40 - DRC 0 */
+ { 41, 0x3248 }, /* R41 - DRC 1 */
+ { 42, 0x0000 }, /* R42 - DRC 2 */
+ { 43, 0x0000 }, /* R43 - DRC 3 */
+ { 44, 0x0085 }, /* R44 - Analogue Left Input 0 */
+ { 45, 0x0085 }, /* R45 - Analogue Right Input 0 */
+ { 46, 0x0044 }, /* R46 - Analogue Left Input 1 */
+ { 47, 0x0044 }, /* R47 - Analogue Right Input 1 */
+ { 57, 0x002D }, /* R57 - Analogue OUT1 Left */
+ { 58, 0x002D }, /* R58 - Analogue OUT1 Right */
+ { 59, 0x0039 }, /* R59 - Analogue OUT2 Left */
+ { 60, 0x0039 }, /* R60 - Analogue OUT2 Right */
+ { 61, 0x0000 }, /* R61 - Analogue OUT12 ZC */
+ { 67, 0x0000 }, /* R67 - DC Servo 0 */
+ { 69, 0xAAAA }, /* R69 - DC Servo 2 */
+ { 71, 0xAAAA }, /* R71 - DC Servo 4 */
+ { 72, 0xAAAA }, /* R72 - DC Servo 5 */
+ { 90, 0x0000 }, /* R90 - Analogue HP 0 */
+ { 94, 0x0000 }, /* R94 - Analogue Lineout 0 */
+ { 98, 0x0000 }, /* R98 - Charge Pump 0 */
+ { 104, 0x0004 }, /* R104 - Class W 0 */
+ { 108, 0x0000 }, /* R108 - Write Sequencer 0 */
+ { 109, 0x0000 }, /* R109 - Write Sequencer 1 */
+ { 110, 0x0000 }, /* R110 - Write Sequencer 2 */
+ { 111, 0x0000 }, /* R111 - Write Sequencer 3 */
+ { 112, 0x0000 }, /* R112 - Write Sequencer 4 */
+ { 116, 0x0000 }, /* R116 - FLL Control 1 */
+ { 117, 0x0007 }, /* R117 - FLL Control 2 */
+ { 118, 0x0000 }, /* R118 - FLL Control 3 */
+ { 119, 0x2EE0 }, /* R119 - FLL Control 4 */
+ { 120, 0x0004 }, /* R120 - FLL Control 5 */
+ { 121, 0x0014 }, /* R121 - GPIO Control 1 */
+ { 122, 0x0010 }, /* R122 - GPIO Control 2 */
+ { 123, 0x0010 }, /* R123 - GPIO Control 3 */
+ { 124, 0x0000 }, /* R124 - GPIO Control 4 */
+ { 126, 0x0000 }, /* R126 - Digital Pulls */
+ { 128, 0xFFFF }, /* R128 - Interrupt Status Mask */
+ { 129, 0x0000 }, /* R129 - Interrupt Polarity */
+ { 130, 0x0000 }, /* R130 - Interrupt Debounce */
+ { 134, 0x0000 }, /* R134 - EQ1 */
+ { 135, 0x000C }, /* R135 - EQ2 */
+ { 136, 0x000C }, /* R136 - EQ3 */
+ { 137, 0x000C }, /* R137 - EQ4 */
+ { 138, 0x000C }, /* R138 - EQ5 */
+ { 139, 0x000C }, /* R139 - EQ6 */
+ { 140, 0x0FCA }, /* R140 - EQ7 */
+ { 141, 0x0400 }, /* R141 - EQ8 */
+ { 142, 0x00D8 }, /* R142 - EQ9 */
+ { 143, 0x1EB5 }, /* R143 - EQ10 */
+ { 144, 0xF145 }, /* R144 - EQ11 */
+ { 145, 0x0B75 }, /* R145 - EQ12 */
+ { 146, 0x01C5 }, /* R146 - EQ13 */
+ { 147, 0x1C58 }, /* R147 - EQ14 */
+ { 148, 0xF373 }, /* R148 - EQ15 */
+ { 149, 0x0A54 }, /* R149 - EQ16 */
+ { 150, 0x0558 }, /* R150 - EQ17 */
+ { 151, 0x168E }, /* R151 - EQ18 */
+ { 152, 0xF829 }, /* R152 - EQ19 */
+ { 153, 0x07AD }, /* R153 - EQ20 */
+ { 154, 0x1103 }, /* R154 - EQ21 */
+ { 155, 0x0564 }, /* R155 - EQ22 */
+ { 156, 0x0559 }, /* R156 - EQ23 */
+ { 157, 0x4000 }, /* R157 - EQ24 */
+ { 161, 0x0000 }, /* R161 - Control Interface Test 1 */
+ { 204, 0x0000 }, /* R204 - Analogue Output Bias 0 */
+ { 247, 0x0000 }, /* R247 - FLL NCO Test 0 */
+ { 248, 0x0019 }, /* R248 - FLL NCO Test 1 */
+};
+
+static bool wm8904_volatile_register(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case WM8904_SW_RESET_AND_ID:
+ case WM8904_REVISION:
+ case WM8904_DC_SERVO_1:
+ case WM8904_DC_SERVO_6:
+ case WM8904_DC_SERVO_7:
+ case WM8904_DC_SERVO_8:
+ case WM8904_DC_SERVO_9:
+ case WM8904_DC_SERVO_READBACK_0:
+ case WM8904_INTERRUPT_STATUS:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool wm8904_readable_register(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case WM8904_SW_RESET_AND_ID:
+ case WM8904_REVISION:
+ case WM8904_BIAS_CONTROL_0:
+ case WM8904_VMID_CONTROL_0:
+ case WM8904_MIC_BIAS_CONTROL_0:
+ case WM8904_MIC_BIAS_CONTROL_1:
+ case WM8904_ANALOGUE_DAC_0:
+ case WM8904_MIC_FILTER_CONTROL:
+ case WM8904_ANALOGUE_ADC_0:
+ case WM8904_POWER_MANAGEMENT_0:
+ case WM8904_POWER_MANAGEMENT_2:
+ case WM8904_POWER_MANAGEMENT_3:
+ case WM8904_POWER_MANAGEMENT_6:
+ case WM8904_CLOCK_RATES_0:
+ case WM8904_CLOCK_RATES_1:
+ case WM8904_CLOCK_RATES_2:
+ case WM8904_AUDIO_INTERFACE_0:
+ case WM8904_AUDIO_INTERFACE_1:
+ case WM8904_AUDIO_INTERFACE_2:
+ case WM8904_AUDIO_INTERFACE_3:
+ case WM8904_DAC_DIGITAL_VOLUME_LEFT:
+ case WM8904_DAC_DIGITAL_VOLUME_RIGHT:
+ case WM8904_DAC_DIGITAL_0:
+ case WM8904_DAC_DIGITAL_1:
+ case WM8904_ADC_DIGITAL_VOLUME_LEFT:
+ case WM8904_ADC_DIGITAL_VOLUME_RIGHT:
+ case WM8904_ADC_DIGITAL_0:
+ case WM8904_DIGITAL_MICROPHONE_0:
+ case WM8904_DRC_0:
+ case WM8904_DRC_1:
+ case WM8904_DRC_2:
+ case WM8904_DRC_3:
+ case WM8904_ANALOGUE_LEFT_INPUT_0:
+ case WM8904_ANALOGUE_RIGHT_INPUT_0:
+ case WM8904_ANALOGUE_LEFT_INPUT_1:
+ case WM8904_ANALOGUE_RIGHT_INPUT_1:
+ case WM8904_ANALOGUE_OUT1_LEFT:
+ case WM8904_ANALOGUE_OUT1_RIGHT:
+ case WM8904_ANALOGUE_OUT2_LEFT:
+ case WM8904_ANALOGUE_OUT2_RIGHT:
+ case WM8904_ANALOGUE_OUT12_ZC:
+ case WM8904_DC_SERVO_0:
+ case WM8904_DC_SERVO_1:
+ case WM8904_DC_SERVO_2:
+ case WM8904_DC_SERVO_4:
+ case WM8904_DC_SERVO_5:
+ case WM8904_DC_SERVO_6:
+ case WM8904_DC_SERVO_7:
+ case WM8904_DC_SERVO_8:
+ case WM8904_DC_SERVO_9:
+ case WM8904_DC_SERVO_READBACK_0:
+ case WM8904_ANALOGUE_HP_0:
+ case WM8904_ANALOGUE_LINEOUT_0:
+ case WM8904_CHARGE_PUMP_0:
+ case WM8904_CLASS_W_0:
+ case WM8904_WRITE_SEQUENCER_0:
+ case WM8904_WRITE_SEQUENCER_1:
+ case WM8904_WRITE_SEQUENCER_2:
+ case WM8904_WRITE_SEQUENCER_3:
+ case WM8904_WRITE_SEQUENCER_4:
+ case WM8904_FLL_CONTROL_1:
+ case WM8904_FLL_CONTROL_2:
+ case WM8904_FLL_CONTROL_3:
+ case WM8904_FLL_CONTROL_4:
+ case WM8904_FLL_CONTROL_5:
+ case WM8904_GPIO_CONTROL_1:
+ case WM8904_GPIO_CONTROL_2:
+ case WM8904_GPIO_CONTROL_3:
+ case WM8904_GPIO_CONTROL_4:
+ case WM8904_DIGITAL_PULLS:
+ case WM8904_INTERRUPT_STATUS:
+ case WM8904_INTERRUPT_STATUS_MASK:
+ case WM8904_INTERRUPT_POLARITY:
+ case WM8904_INTERRUPT_DEBOUNCE:
+ case WM8904_EQ1:
+ case WM8904_EQ2:
+ case WM8904_EQ3:
+ case WM8904_EQ4:
+ case WM8904_EQ5:
+ case WM8904_EQ6:
+ case WM8904_EQ7:
+ case WM8904_EQ8:
+ case WM8904_EQ9:
+ case WM8904_EQ10:
+ case WM8904_EQ11:
+ case WM8904_EQ12:
+ case WM8904_EQ13:
+ case WM8904_EQ14:
+ case WM8904_EQ15:
+ case WM8904_EQ16:
+ case WM8904_EQ17:
+ case WM8904_EQ18:
+ case WM8904_EQ19:
+ case WM8904_EQ20:
+ case WM8904_EQ21:
+ case WM8904_EQ22:
+ case WM8904_EQ23:
+ case WM8904_EQ24:
+ case WM8904_CONTROL_INTERFACE_TEST_1:
+ case WM8904_ADC_TEST_0:
+ case WM8904_ANALOGUE_OUTPUT_BIAS_0:
+ case WM8904_FLL_NCO_TEST_0:
+ case WM8904_FLL_NCO_TEST_1:
+ return true;
+ default:
+ return true;
+ }
+}
+
+static int wm8904_configure_clocking(struct snd_soc_codec *codec)
+{
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ unsigned int clock0, clock2, rate;
+
+ /* Gate the clock while we're updating to avoid misclocking */
+ clock2 = snd_soc_read(codec, WM8904_CLOCK_RATES_2);
+ snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
+ WM8904_SYSCLK_SRC, 0);
+
+ /* This should be done on init() for bypass paths */
+ switch (wm8904->sysclk_src) {
+ case WM8904_CLK_MCLK:
+ dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8904->mclk_rate);
+
+ clock2 &= ~WM8904_SYSCLK_SRC;
+ rate = wm8904->mclk_rate;
+
+ /* Ensure the FLL is stopped */
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_OSC_ENA | WM8904_FLL_ENA, 0);
+ break;
+
+ case WM8904_CLK_FLL:
+ dev_dbg(codec->dev, "Using %dHz FLL clock\n",
+ wm8904->fll_fout);
+
+ clock2 |= WM8904_SYSCLK_SRC;
+ rate = wm8904->fll_fout;
+ break;
+
+ default:
+ dev_err(codec->dev, "System clock not configured\n");
+ return -EINVAL;
+ }
+
+ /* SYSCLK shouldn't be over 13.5MHz */
+ if (rate > 13500000) {
+ clock0 = WM8904_MCLK_DIV;
+ wm8904->sysclk_rate = rate / 2;
+ } else {
+ clock0 = 0;
+ wm8904->sysclk_rate = rate;
+ }
+
+ snd_soc_update_bits(codec, WM8904_CLOCK_RATES_0, WM8904_MCLK_DIV,
+ clock0);
+
+ snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
+ WM8904_CLK_SYS_ENA | WM8904_SYSCLK_SRC, clock2);
+
+ dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm8904->sysclk_rate);
+
+ return 0;
+}
+
+static void wm8904_set_drc(struct snd_soc_codec *codec)
+{
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ struct wm8904_pdata *pdata = wm8904->pdata;
+ int save, i;
+
+ /* Save any enables; the configuration should clear them. */
+ save = snd_soc_read(codec, WM8904_DRC_0);
+
+ for (i = 0; i < WM8904_DRC_REGS; i++)
+ snd_soc_update_bits(codec, WM8904_DRC_0 + i, 0xffff,
+ pdata->drc_cfgs[wm8904->drc_cfg].regs[i]);
+
+ /* Reenable the DRC */
+ snd_soc_update_bits(codec, WM8904_DRC_0,
+ WM8904_DRC_ENA | WM8904_DRC_DAC_PATH, save);
+}
+
+static int wm8904_put_drc_enum(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ struct wm8904_pdata *pdata = wm8904->pdata;
+ int value = ucontrol->value.integer.value[0];
+
+ if (value >= pdata->num_drc_cfgs)
+ return -EINVAL;
+
+ wm8904->drc_cfg = value;
+
+ wm8904_set_drc(codec);
+
+ return 0;
+}
+
+static int wm8904_get_drc_enum(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+
+ ucontrol->value.enumerated.item[0] = wm8904->drc_cfg;
+
+ return 0;
+}
+
+static void wm8904_set_retune_mobile(struct snd_soc_codec *codec)
+{
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ struct wm8904_pdata *pdata = wm8904->pdata;
+ int best, best_val, save, i, cfg;
+
+ if (!pdata || !wm8904->num_retune_mobile_texts)
+ return;
+
+ /* Find the version of the currently selected configuration
+ * with the nearest sample rate. */
+ cfg = wm8904->retune_mobile_cfg;
+ best = 0;
+ best_val = INT_MAX;
+ for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) {
+ if (strcmp(pdata->retune_mobile_cfgs[i].name,
+ wm8904->retune_mobile_texts[cfg]) == 0 &&
+ abs(pdata->retune_mobile_cfgs[i].rate
+ - wm8904->fs) < best_val) {
+ best = i;
+ best_val = abs(pdata->retune_mobile_cfgs[i].rate
+ - wm8904->fs);
+ }
+ }
+
+ dev_dbg(codec->dev, "ReTune Mobile %s/%dHz for %dHz sample rate\n",
+ pdata->retune_mobile_cfgs[best].name,
+ pdata->retune_mobile_cfgs[best].rate,
+ wm8904->fs);
+
+ /* The EQ will be disabled while reconfiguring it, remember the
+ * current configuration.
+ */
+ save = snd_soc_read(codec, WM8904_EQ1);
+
+ for (i = 0; i < WM8904_EQ_REGS; i++)
+ snd_soc_update_bits(codec, WM8904_EQ1 + i, 0xffff,
+ pdata->retune_mobile_cfgs[best].regs[i]);
+
+ snd_soc_update_bits(codec, WM8904_EQ1, WM8904_EQ_ENA, save);
+}
+
+static int wm8904_put_retune_mobile_enum(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ struct wm8904_pdata *pdata = wm8904->pdata;
+ int value = ucontrol->value.integer.value[0];
+
+ if (value >= pdata->num_retune_mobile_cfgs)
+ return -EINVAL;
+
+ wm8904->retune_mobile_cfg = value;
+
+ wm8904_set_retune_mobile(codec);
+
+ return 0;
+}
+
+static int wm8904_get_retune_mobile_enum(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+
+ ucontrol->value.enumerated.item[0] = wm8904->retune_mobile_cfg;
+
+ return 0;
+}
+
+static int deemph_settings[] = { 0, 32000, 44100, 48000 };
+
+static int wm8904_set_deemph(struct snd_soc_codec *codec)
+{
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ int val, i, best;
+
+ /* If we're using deemphasis select the nearest available sample
+ * rate.
+ */
+ if (wm8904->deemph) {
+ best = 1;
+ for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) {
+ if (abs(deemph_settings[i] - wm8904->fs) <
+ abs(deemph_settings[best] - wm8904->fs))
+ best = i;
+ }
+
+ val = best << WM8904_DEEMPH_SHIFT;
+ } else {
+ val = 0;
+ }
+
+ dev_dbg(codec->dev, "Set deemphasis %d\n", val);
+
+ return snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_1,
+ WM8904_DEEMPH_MASK, val);
+}
+
+static int wm8904_get_deemph(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+
+ ucontrol->value.integer.value[0] = wm8904->deemph;
+ return 0;
+}
+
+static int wm8904_put_deemph(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ int deemph = ucontrol->value.integer.value[0];
+
+ if (deemph > 1)
+ return -EINVAL;
+
+ wm8904->deemph = deemph;
+
+ return wm8904_set_deemph(codec);
+}
+
+static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
+static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
+static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
+static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+
+static const char *input_mode_text[] = {
+ "Single-Ended", "Differential Line", "Differential Mic"
+};
+
+static SOC_ENUM_SINGLE_DECL(lin_mode,
+ WM8904_ANALOGUE_LEFT_INPUT_1, 0,
+ input_mode_text);
+
+static SOC_ENUM_SINGLE_DECL(rin_mode,
+ WM8904_ANALOGUE_RIGHT_INPUT_1, 0,
+ input_mode_text);
+
+static const char *hpf_mode_text[] = {
+ "Hi-fi", "Voice 1", "Voice 2", "Voice 3"
+};
+
+static SOC_ENUM_SINGLE_DECL(hpf_mode, WM8904_ADC_DIGITAL_0, 5,
+ hpf_mode_text);
+
+static int wm8904_adc_osr_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ unsigned int val;
+ int ret;
+
+ ret = snd_soc_put_volsw(kcontrol, ucontrol);
+ if (ret < 0)
+ return ret;
+
+ if (ucontrol->value.integer.value[0])
+ val = 0;
+ else
+ val = WM8904_ADC_128_OSR_TST_MODE | WM8904_ADC_BIASX1P5;
+
+ snd_soc_update_bits(codec, WM8904_ADC_TEST_0,
+ WM8904_ADC_128_OSR_TST_MODE | WM8904_ADC_BIASX1P5,
+ val);
+
+ return ret;
+}
+
+static const struct snd_kcontrol_new wm8904_adc_snd_controls[] = {
+SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8904_ADC_DIGITAL_VOLUME_LEFT,
+ WM8904_ADC_DIGITAL_VOLUME_RIGHT, 1, 119, 0, digital_tlv),
+
+SOC_ENUM("Left Caputure Mode", lin_mode),
+SOC_ENUM("Right Capture Mode", rin_mode),
+
+/* No TLV since it depends on mode */
+SOC_DOUBLE_R("Capture Volume", WM8904_ANALOGUE_LEFT_INPUT_0,
+ WM8904_ANALOGUE_RIGHT_INPUT_0, 0, 31, 0),
+SOC_DOUBLE_R("Capture Switch", WM8904_ANALOGUE_LEFT_INPUT_0,
+ WM8904_ANALOGUE_RIGHT_INPUT_0, 7, 1, 1),
+
+SOC_SINGLE("High Pass Filter Switch", WM8904_ADC_DIGITAL_0, 4, 1, 0),
+SOC_ENUM("High Pass Filter Mode", hpf_mode),
+SOC_SINGLE_EXT("ADC 128x OSR Switch", WM8904_ANALOGUE_ADC_0, 0, 1, 0,
+ snd_soc_get_volsw, wm8904_adc_osr_put),
+};
+
+static const char *drc_path_text[] = {
+ "ADC", "DAC"
+};
+
+static SOC_ENUM_SINGLE_DECL(drc_path, WM8904_DRC_0, 14, drc_path_text);
+
+static const struct snd_kcontrol_new wm8904_dac_snd_controls[] = {
+SOC_SINGLE_TLV("Digital Playback Boost Volume",
+ WM8904_AUDIO_INTERFACE_0, 9, 3, 0, dac_boost_tlv),
+SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8904_DAC_DIGITAL_VOLUME_LEFT,
+ WM8904_DAC_DIGITAL_VOLUME_RIGHT, 1, 96, 0, digital_tlv),
+
+SOC_DOUBLE_R_TLV("Headphone Volume", WM8904_ANALOGUE_OUT1_LEFT,
+ WM8904_ANALOGUE_OUT1_RIGHT, 0, 63, 0, out_tlv),
+SOC_DOUBLE_R("Headphone Switch", WM8904_ANALOGUE_OUT1_LEFT,
+ WM8904_ANALOGUE_OUT1_RIGHT, 8, 1, 1),
+SOC_DOUBLE_R("Headphone ZC Switch", WM8904_ANALOGUE_OUT1_LEFT,
+ WM8904_ANALOGUE_OUT1_RIGHT, 6, 1, 0),
+
+SOC_DOUBLE_R_TLV("Line Output Volume", WM8904_ANALOGUE_OUT2_LEFT,
+ WM8904_ANALOGUE_OUT2_RIGHT, 0, 63, 0, out_tlv),
+SOC_DOUBLE_R("Line Output Switch", WM8904_ANALOGUE_OUT2_LEFT,
+ WM8904_ANALOGUE_OUT2_RIGHT, 8, 1, 1),
+SOC_DOUBLE_R("Line Output ZC Switch", WM8904_ANALOGUE_OUT2_LEFT,
+ WM8904_ANALOGUE_OUT2_RIGHT, 6, 1, 0),
+
+SOC_SINGLE("EQ Switch", WM8904_EQ1, 0, 1, 0),
+SOC_SINGLE("DRC Switch", WM8904_DRC_0, 15, 1, 0),
+SOC_ENUM("DRC Path", drc_path),
+SOC_SINGLE("DAC OSRx2 Switch", WM8904_DAC_DIGITAL_1, 6, 1, 0),
+SOC_SINGLE_BOOL_EXT("DAC Deemphasis Switch", 0,
+ wm8904_get_deemph, wm8904_put_deemph),
+};
+
+static const struct snd_kcontrol_new wm8904_snd_controls[] = {
+SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8904_DAC_DIGITAL_0, 4, 8, 15, 0,
+ sidetone_tlv),
+};
+
+static const struct snd_kcontrol_new wm8904_eq_controls[] = {
+SOC_SINGLE_TLV("EQ1 Volume", WM8904_EQ2, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ2 Volume", WM8904_EQ3, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ3 Volume", WM8904_EQ4, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ4 Volume", WM8904_EQ5, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ5 Volume", WM8904_EQ6, 0, 24, 0, eq_tlv),
+};
+
+static int cp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ if (WARN_ON(event != SND_SOC_DAPM_POST_PMU))
+ return -EINVAL;
+
+ /* Maximum startup time */
+ udelay(500);
+
+ return 0;
+}
+
+static int sysclk_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ /* If we're using the FLL then we only start it when
+ * required; we assume that the configuration has been
+ * done previously and all we need to do is kick it
+ * off.
+ */
+ switch (wm8904->sysclk_src) {
+ case WM8904_CLK_FLL:
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_OSC_ENA,
+ WM8904_FLL_OSC_ENA);
+
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_ENA,
+ WM8904_FLL_ENA);
+ break;
+
+ default:
+ break;
+ }
+ break;
+
+ case SND_SOC_DAPM_POST_PMD:
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_OSC_ENA | WM8904_FLL_ENA, 0);
+ break;
+ }
+
+ return 0;
+}
+
+static int out_pga_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ int reg, val;
+ int dcs_mask;
+ int dcs_l, dcs_r;
+ int dcs_l_reg, dcs_r_reg;
+ int timeout;
+ int pwr_reg;
+
+ /* This code is shared between HP and LINEOUT; we do all our
+ * power management in stereo pairs to avoid latency issues so
+ * we reuse shift to identify which rather than strcmp() the
+ * name. */
+ reg = w->shift;
+
+ switch (reg) {
+ case WM8904_ANALOGUE_HP_0:
+ pwr_reg = WM8904_POWER_MANAGEMENT_2;
+ dcs_mask = WM8904_DCS_ENA_CHAN_0 | WM8904_DCS_ENA_CHAN_1;
+ dcs_r_reg = WM8904_DC_SERVO_8;
+ dcs_l_reg = WM8904_DC_SERVO_9;
+ dcs_l = 0;
+ dcs_r = 1;
+ break;
+ case WM8904_ANALOGUE_LINEOUT_0:
+ pwr_reg = WM8904_POWER_MANAGEMENT_3;
+ dcs_mask = WM8904_DCS_ENA_CHAN_2 | WM8904_DCS_ENA_CHAN_3;
+ dcs_r_reg = WM8904_DC_SERVO_6;
+ dcs_l_reg = WM8904_DC_SERVO_7;
+ dcs_l = 2;
+ dcs_r = 3;
+ break;
+ default:
+ WARN(1, "Invalid reg %d\n", reg);
+ return -EINVAL;
+ }
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ /* Power on the PGAs */
+ snd_soc_update_bits(codec, pwr_reg,
+ WM8904_HPL_PGA_ENA | WM8904_HPR_PGA_ENA,
+ WM8904_HPL_PGA_ENA | WM8904_HPR_PGA_ENA);
+
+ /* Power on the amplifier */
+ snd_soc_update_bits(codec, reg,
+ WM8904_HPL_ENA | WM8904_HPR_ENA,
+ WM8904_HPL_ENA | WM8904_HPR_ENA);
+
+
+ /* Enable the first stage */
+ snd_soc_update_bits(codec, reg,
+ WM8904_HPL_ENA_DLY | WM8904_HPR_ENA_DLY,
+ WM8904_HPL_ENA_DLY | WM8904_HPR_ENA_DLY);
+
+ /* Power up the DC servo */
+ snd_soc_update_bits(codec, WM8904_DC_SERVO_0,
+ dcs_mask, dcs_mask);
+
+ /* Either calibrate the DC servo or restore cached state
+ * if we have that.
+ */
+ if (wm8904->dcs_state[dcs_l] || wm8904->dcs_state[dcs_r]) {
+ dev_dbg(codec->dev, "Restoring DC servo state\n");
+
+ snd_soc_write(codec, dcs_l_reg,
+ wm8904->dcs_state[dcs_l]);
+ snd_soc_write(codec, dcs_r_reg,
+ wm8904->dcs_state[dcs_r]);
+
+ snd_soc_write(codec, WM8904_DC_SERVO_1, dcs_mask);
+
+ timeout = 20;
+ } else {
+ dev_dbg(codec->dev, "Calibrating DC servo\n");
+
+ snd_soc_write(codec, WM8904_DC_SERVO_1,
+ dcs_mask << WM8904_DCS_TRIG_STARTUP_0_SHIFT);
+
+ timeout = 500;
+ }
+
+ /* Wait for DC servo to complete */
+ dcs_mask <<= WM8904_DCS_CAL_COMPLETE_SHIFT;
+ do {
+ val = snd_soc_read(codec, WM8904_DC_SERVO_READBACK_0);
+ if ((val & dcs_mask) == dcs_mask)
+ break;
+
+ msleep(1);
+ } while (--timeout);
+
+ if ((val & dcs_mask) != dcs_mask)
+ dev_warn(codec->dev, "DC servo timed out\n");
+ else
+ dev_dbg(codec->dev, "DC servo ready\n");
+
+ /* Enable the output stage */
+ snd_soc_update_bits(codec, reg,
+ WM8904_HPL_ENA_OUTP | WM8904_HPR_ENA_OUTP,
+ WM8904_HPL_ENA_OUTP | WM8904_HPR_ENA_OUTP);
+ break;
+
+ case SND_SOC_DAPM_POST_PMU:
+ /* Unshort the output itself */
+ snd_soc_update_bits(codec, reg,
+ WM8904_HPL_RMV_SHORT |
+ WM8904_HPR_RMV_SHORT,
+ WM8904_HPL_RMV_SHORT |
+ WM8904_HPR_RMV_SHORT);
+
+ break;
+
+ case SND_SOC_DAPM_PRE_PMD:
+ /* Short the output */
+ snd_soc_update_bits(codec, reg,
+ WM8904_HPL_RMV_SHORT |
+ WM8904_HPR_RMV_SHORT, 0);
+ break;
+
+ case SND_SOC_DAPM_POST_PMD:
+ /* Cache the DC servo configuration; this will be
+ * invalidated if we change the configuration. */
+ wm8904->dcs_state[dcs_l] = snd_soc_read(codec, dcs_l_reg);
+ wm8904->dcs_state[dcs_r] = snd_soc_read(codec, dcs_r_reg);
+
+ snd_soc_update_bits(codec, WM8904_DC_SERVO_0,
+ dcs_mask, 0);
+
+ /* Disable the amplifier input and output stages */
+ snd_soc_update_bits(codec, reg,
+ WM8904_HPL_ENA | WM8904_HPR_ENA |
+ WM8904_HPL_ENA_DLY | WM8904_HPR_ENA_DLY |
+ WM8904_HPL_ENA_OUTP | WM8904_HPR_ENA_OUTP,
+ 0);
+
+ /* PGAs too */
+ snd_soc_update_bits(codec, pwr_reg,
+ WM8904_HPL_PGA_ENA | WM8904_HPR_PGA_ENA,
+ 0);
+ break;
+ }
+
+ return 0;
+}
+
+static const char *lin_text[] = {
+ "IN1L", "IN2L", "IN3L"
+};
+
+static SOC_ENUM_SINGLE_DECL(lin_enum, WM8904_ANALOGUE_LEFT_INPUT_1, 2,
+ lin_text);
+
+static const struct snd_kcontrol_new lin_mux =
+ SOC_DAPM_ENUM("Left Capture Mux", lin_enum);
+
+static SOC_ENUM_SINGLE_DECL(lin_inv_enum, WM8904_ANALOGUE_LEFT_INPUT_1, 4,
+ lin_text);
+
+static const struct snd_kcontrol_new lin_inv_mux =
+ SOC_DAPM_ENUM("Left Capture Inveting Mux", lin_inv_enum);
+
+static const char *rin_text[] = {
+ "IN1R", "IN2R", "IN3R"
+};
+
+static SOC_ENUM_SINGLE_DECL(rin_enum, WM8904_ANALOGUE_RIGHT_INPUT_1, 2,
+ rin_text);
+
+static const struct snd_kcontrol_new rin_mux =
+ SOC_DAPM_ENUM("Right Capture Mux", rin_enum);
+
+static SOC_ENUM_SINGLE_DECL(rin_inv_enum, WM8904_ANALOGUE_RIGHT_INPUT_1, 4,
+ rin_text);
+
+static const struct snd_kcontrol_new rin_inv_mux =
+ SOC_DAPM_ENUM("Right Capture Inveting Mux", rin_inv_enum);
+
+static const char *aif_text[] = {
+ "Left", "Right"
+};
+
+static SOC_ENUM_SINGLE_DECL(aifoutl_enum, WM8904_AUDIO_INTERFACE_0, 7,
+ aif_text);
+
+static const struct snd_kcontrol_new aifoutl_mux =
+ SOC_DAPM_ENUM("AIFOUTL Mux", aifoutl_enum);
+
+static SOC_ENUM_SINGLE_DECL(aifoutr_enum, WM8904_AUDIO_INTERFACE_0, 6,
+ aif_text);
+
+static const struct snd_kcontrol_new aifoutr_mux =
+ SOC_DAPM_ENUM("AIFOUTR Mux", aifoutr_enum);
+
+static SOC_ENUM_SINGLE_DECL(aifinl_enum, WM8904_AUDIO_INTERFACE_0, 5,
+ aif_text);
+
+static const struct snd_kcontrol_new aifinl_mux =
+ SOC_DAPM_ENUM("AIFINL Mux", aifinl_enum);
+
+static SOC_ENUM_SINGLE_DECL(aifinr_enum, WM8904_AUDIO_INTERFACE_0, 4,
+ aif_text);
+
+static const struct snd_kcontrol_new aifinr_mux =
+ SOC_DAPM_ENUM("AIFINR Mux", aifinr_enum);
+
+static const struct snd_soc_dapm_widget wm8904_core_dapm_widgets[] = {
+SND_SOC_DAPM_SUPPLY("SYSCLK", WM8904_CLOCK_RATES_2, 2, 0, sysclk_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8904_CLOCK_RATES_2, 1, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("TOCLK", WM8904_CLOCK_RATES_2, 0, 0, NULL, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8904_adc_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("IN1L"),
+SND_SOC_DAPM_INPUT("IN1R"),
+SND_SOC_DAPM_INPUT("IN2L"),
+SND_SOC_DAPM_INPUT("IN2R"),
+SND_SOC_DAPM_INPUT("IN3L"),
+SND_SOC_DAPM_INPUT("IN3R"),
+
+SND_SOC_DAPM_SUPPLY("MICBIAS", WM8904_MIC_BIAS_CONTROL_0, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_MUX("Left Capture Mux", SND_SOC_NOPM, 0, 0, &lin_mux),
+SND_SOC_DAPM_MUX("Left Capture Inverting Mux", SND_SOC_NOPM, 0, 0,
+ &lin_inv_mux),
+SND_SOC_DAPM_MUX("Right Capture Mux", SND_SOC_NOPM, 0, 0, &rin_mux),
+SND_SOC_DAPM_MUX("Right Capture Inverting Mux", SND_SOC_NOPM, 0, 0,
+ &rin_inv_mux),
+
+SND_SOC_DAPM_PGA("Left Capture PGA", WM8904_POWER_MANAGEMENT_0, 1, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("Right Capture PGA", WM8904_POWER_MANAGEMENT_0, 0, 0,
+ NULL, 0),
+
+SND_SOC_DAPM_ADC("ADCL", NULL, WM8904_POWER_MANAGEMENT_6, 1, 0),
+SND_SOC_DAPM_ADC("ADCR", NULL, WM8904_POWER_MANAGEMENT_6, 0, 0),
+
+SND_SOC_DAPM_MUX("AIFOUTL Mux", SND_SOC_NOPM, 0, 0, &aifoutl_mux),
+SND_SOC_DAPM_MUX("AIFOUTR Mux", SND_SOC_NOPM, 0, 0, &aifoutr_mux),
+
+SND_SOC_DAPM_AIF_OUT("AIFOUTL", "Capture", 0, SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_AIF_OUT("AIFOUTR", "Capture", 1, SND_SOC_NOPM, 0, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8904_dac_dapm_widgets[] = {
+SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
+
+SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &aifinl_mux),
+SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &aifinr_mux),
+
+SND_SOC_DAPM_DAC("DACL", NULL, WM8904_POWER_MANAGEMENT_6, 3, 0),
+SND_SOC_DAPM_DAC("DACR", NULL, WM8904_POWER_MANAGEMENT_6, 2, 0),
+
+SND_SOC_DAPM_SUPPLY("Charge pump", WM8904_CHARGE_PUMP_0, 0, 0, cp_event,
+ SND_SOC_DAPM_POST_PMU),
+
+SND_SOC_DAPM_PGA("HPL PGA", SND_SOC_NOPM, 1, 0, NULL, 0),
+SND_SOC_DAPM_PGA("HPR PGA", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA("LINEL PGA", SND_SOC_NOPM, 1, 0, NULL, 0),
+SND_SOC_DAPM_PGA("LINER PGA", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA_E("Headphone Output", SND_SOC_NOPM, WM8904_ANALOGUE_HP_0,
+ 0, NULL, 0, out_pga_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+ SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_PGA_E("Line Output", SND_SOC_NOPM, WM8904_ANALOGUE_LINEOUT_0,
+ 0, NULL, 0, out_pga_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+ SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+
+SND_SOC_DAPM_OUTPUT("HPOUTL"),
+SND_SOC_DAPM_OUTPUT("HPOUTR"),
+SND_SOC_DAPM_OUTPUT("LINEOUTL"),
+SND_SOC_DAPM_OUTPUT("LINEOUTR"),
+};
+
+static const char *out_mux_text[] = {
+ "DAC", "Bypass"
+};
+
+static SOC_ENUM_SINGLE_DECL(hpl_enum, WM8904_ANALOGUE_OUT12_ZC, 3,
+ out_mux_text);
+
+static const struct snd_kcontrol_new hpl_mux =
+ SOC_DAPM_ENUM("HPL Mux", hpl_enum);
+
+static SOC_ENUM_SINGLE_DECL(hpr_enum, WM8904_ANALOGUE_OUT12_ZC, 2,
+ out_mux_text);
+
+static const struct snd_kcontrol_new hpr_mux =
+ SOC_DAPM_ENUM("HPR Mux", hpr_enum);
+
+static SOC_ENUM_SINGLE_DECL(linel_enum, WM8904_ANALOGUE_OUT12_ZC, 1,
+ out_mux_text);
+
+static const struct snd_kcontrol_new linel_mux =
+ SOC_DAPM_ENUM("LINEL Mux", linel_enum);
+
+static SOC_ENUM_SINGLE_DECL(liner_enum, WM8904_ANALOGUE_OUT12_ZC, 0,
+ out_mux_text);
+
+static const struct snd_kcontrol_new liner_mux =
+ SOC_DAPM_ENUM("LINER Mux", liner_enum);
+
+static const char *sidetone_text[] = {
+ "None", "Left", "Right"
+};
+
+static SOC_ENUM_SINGLE_DECL(dacl_sidetone_enum, WM8904_DAC_DIGITAL_0, 2,
+ sidetone_text);
+
+static const struct snd_kcontrol_new dacl_sidetone_mux =
+ SOC_DAPM_ENUM("Left Sidetone Mux", dacl_sidetone_enum);
+
+static SOC_ENUM_SINGLE_DECL(dacr_sidetone_enum, WM8904_DAC_DIGITAL_0, 0,
+ sidetone_text);
+
+static const struct snd_kcontrol_new dacr_sidetone_mux =
+ SOC_DAPM_ENUM("Right Sidetone Mux", dacr_sidetone_enum);
+
+static const struct snd_soc_dapm_widget wm8904_dapm_widgets[] = {
+SND_SOC_DAPM_SUPPLY("Class G", WM8904_CLASS_W_0, 0, 1, NULL, 0),
+SND_SOC_DAPM_PGA("Left Bypass", SND_SOC_NOPM, 0, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Right Bypass", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_MUX("Left Sidetone", SND_SOC_NOPM, 0, 0, &dacl_sidetone_mux),
+SND_SOC_DAPM_MUX("Right Sidetone", SND_SOC_NOPM, 0, 0, &dacr_sidetone_mux),
+
+SND_SOC_DAPM_MUX("HPL Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
+SND_SOC_DAPM_MUX("HPR Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
+SND_SOC_DAPM_MUX("LINEL Mux", SND_SOC_NOPM, 0, 0, &linel_mux),
+SND_SOC_DAPM_MUX("LINER Mux", SND_SOC_NOPM, 0, 0, &liner_mux),
+};
+
+static const struct snd_soc_dapm_route core_intercon[] = {
+ { "CLK_DSP", NULL, "SYSCLK" },
+ { "TOCLK", NULL, "SYSCLK" },
+};
+
+static const struct snd_soc_dapm_route adc_intercon[] = {
+ { "Left Capture Mux", "IN1L", "IN1L" },
+ { "Left Capture Mux", "IN2L", "IN2L" },
+ { "Left Capture Mux", "IN3L", "IN3L" },
+
+ { "Left Capture Inverting Mux", "IN1L", "IN1L" },
+ { "Left Capture Inverting Mux", "IN2L", "IN2L" },
+ { "Left Capture Inverting Mux", "IN3L", "IN3L" },
+
+ { "Right Capture Mux", "IN1R", "IN1R" },
+ { "Right Capture Mux", "IN2R", "IN2R" },
+ { "Right Capture Mux", "IN3R", "IN3R" },
+
+ { "Right Capture Inverting Mux", "IN1R", "IN1R" },
+ { "Right Capture Inverting Mux", "IN2R", "IN2R" },
+ { "Right Capture Inverting Mux", "IN3R", "IN3R" },
+
+ { "Left Capture PGA", NULL, "Left Capture Mux" },
+ { "Left Capture PGA", NULL, "Left Capture Inverting Mux" },
+
+ { "Right Capture PGA", NULL, "Right Capture Mux" },
+ { "Right Capture PGA", NULL, "Right Capture Inverting Mux" },
+
+ { "AIFOUTL Mux", "Left", "ADCL" },
+ { "AIFOUTL Mux", "Right", "ADCR" },
+ { "AIFOUTR Mux", "Left", "ADCL" },
+ { "AIFOUTR Mux", "Right", "ADCR" },
+
+ { "AIFOUTL", NULL, "AIFOUTL Mux" },
+ { "AIFOUTR", NULL, "AIFOUTR Mux" },
+
+ { "ADCL", NULL, "CLK_DSP" },
+ { "ADCL", NULL, "Left Capture PGA" },
+
+ { "ADCR", NULL, "CLK_DSP" },
+ { "ADCR", NULL, "Right Capture PGA" },
+};
+
+static const struct snd_soc_dapm_route dac_intercon[] = {
+ { "DACL Mux", "Left", "AIFINL" },
+ { "DACL Mux", "Right", "AIFINR" },
+
+ { "DACR Mux", "Left", "AIFINL" },
+ { "DACR Mux", "Right", "AIFINR" },
+
+ { "DACL", NULL, "DACL Mux" },
+ { "DACL", NULL, "CLK_DSP" },
+
+ { "DACR", NULL, "DACR Mux" },
+ { "DACR", NULL, "CLK_DSP" },
+
+ { "Charge pump", NULL, "SYSCLK" },
+
+ { "Headphone Output", NULL, "HPL PGA" },
+ { "Headphone Output", NULL, "HPR PGA" },
+ { "Headphone Output", NULL, "Charge pump" },
+ { "Headphone Output", NULL, "TOCLK" },
+
+ { "Line Output", NULL, "LINEL PGA" },
+ { "Line Output", NULL, "LINER PGA" },
+ { "Line Output", NULL, "Charge pump" },
+ { "Line Output", NULL, "TOCLK" },
+
+ { "HPOUTL", NULL, "Headphone Output" },
+ { "HPOUTR", NULL, "Headphone Output" },
+
+ { "LINEOUTL", NULL, "Line Output" },
+ { "LINEOUTR", NULL, "Line Output" },
+};
+
+static const struct snd_soc_dapm_route wm8904_intercon[] = {
+ { "Left Sidetone", "Left", "ADCL" },
+ { "Left Sidetone", "Right", "ADCR" },
+ { "DACL", NULL, "Left Sidetone" },
+
+ { "Right Sidetone", "Left", "ADCL" },
+ { "Right Sidetone", "Right", "ADCR" },
+ { "DACR", NULL, "Right Sidetone" },
+
+ { "Left Bypass", NULL, "Class G" },
+ { "Left Bypass", NULL, "Left Capture PGA" },
+
+ { "Right Bypass", NULL, "Class G" },
+ { "Right Bypass", NULL, "Right Capture PGA" },
+
+ { "HPL Mux", "DAC", "DACL" },
+ { "HPL Mux", "Bypass", "Left Bypass" },
+
+ { "HPR Mux", "DAC", "DACR" },
+ { "HPR Mux", "Bypass", "Right Bypass" },
+
+ { "LINEL Mux", "DAC", "DACL" },
+ { "LINEL Mux", "Bypass", "Left Bypass" },
+
+ { "LINER Mux", "DAC", "DACR" },
+ { "LINER Mux", "Bypass", "Right Bypass" },
+
+ { "HPL PGA", NULL, "HPL Mux" },
+ { "HPR PGA", NULL, "HPR Mux" },
+
+ { "LINEL PGA", NULL, "LINEL Mux" },
+ { "LINER PGA", NULL, "LINER Mux" },
+};
+
+static const struct snd_soc_dapm_route wm8912_intercon[] = {
+ { "HPL PGA", NULL, "DACL" },
+ { "HPR PGA", NULL, "DACR" },
+
+ { "LINEL PGA", NULL, "DACL" },
+ { "LINER PGA", NULL, "DACR" },
+};
+
+static int wm8904_add_widgets(struct snd_soc_codec *codec)
+{
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_dapm_context *dapm = &codec->dapm;
+
+ snd_soc_dapm_new_controls(dapm, wm8904_core_dapm_widgets,
+ ARRAY_SIZE(wm8904_core_dapm_widgets));
+ snd_soc_dapm_add_routes(dapm, core_intercon,
+ ARRAY_SIZE(core_intercon));
+
+ switch (wm8904->devtype) {
+ case WM8904:
+ snd_soc_add_codec_controls(codec, wm8904_adc_snd_controls,
+ ARRAY_SIZE(wm8904_adc_snd_controls));
+ snd_soc_add_codec_controls(codec, wm8904_dac_snd_controls,
+ ARRAY_SIZE(wm8904_dac_snd_controls));
+ snd_soc_add_codec_controls(codec, wm8904_snd_controls,
+ ARRAY_SIZE(wm8904_snd_controls));
+
+ snd_soc_dapm_new_controls(dapm, wm8904_adc_dapm_widgets,
+ ARRAY_SIZE(wm8904_adc_dapm_widgets));
+ snd_soc_dapm_new_controls(dapm, wm8904_dac_dapm_widgets,
+ ARRAY_SIZE(wm8904_dac_dapm_widgets));
+ snd_soc_dapm_new_controls(dapm, wm8904_dapm_widgets,
+ ARRAY_SIZE(wm8904_dapm_widgets));
+
+ snd_soc_dapm_add_routes(dapm, adc_intercon,
+ ARRAY_SIZE(adc_intercon));
+ snd_soc_dapm_add_routes(dapm, dac_intercon,
+ ARRAY_SIZE(dac_intercon));
+ snd_soc_dapm_add_routes(dapm, wm8904_intercon,
+ ARRAY_SIZE(wm8904_intercon));
+ break;
+
+ case WM8912:
+ snd_soc_add_codec_controls(codec, wm8904_dac_snd_controls,
+ ARRAY_SIZE(wm8904_dac_snd_controls));
+
+ snd_soc_dapm_new_controls(dapm, wm8904_dac_dapm_widgets,
+ ARRAY_SIZE(wm8904_dac_dapm_widgets));
+
+ snd_soc_dapm_add_routes(dapm, dac_intercon,
+ ARRAY_SIZE(dac_intercon));
+ snd_soc_dapm_add_routes(dapm, wm8912_intercon,
+ ARRAY_SIZE(wm8912_intercon));
+ break;
+ }
+
+ return 0;
+}
+
+static struct {
+ int ratio;
+ unsigned int clk_sys_rate;
+} clk_sys_rates[] = {
+ { 64, 0 },
+ { 128, 1 },
+ { 192, 2 },
+ { 256, 3 },
+ { 384, 4 },
+ { 512, 5 },
+ { 786, 6 },
+ { 1024, 7 },
+ { 1408, 8 },
+ { 1536, 9 },
+};
+
+static struct {
+ int rate;
+ int sample_rate;
+} sample_rates[] = {
+ { 8000, 0 },
+ { 11025, 1 },
+ { 12000, 1 },
+ { 16000, 2 },
+ { 22050, 3 },
+ { 24000, 3 },
+ { 32000, 4 },
+ { 44100, 5 },
+ { 48000, 5 },
+};
+
+static struct {
+ int div; /* *10 due to .5s */
+ int bclk_div;
+} bclk_divs[] = {
+ { 10, 0 },
+ { 15, 1 },
+ { 20, 2 },
+ { 30, 3 },
+ { 40, 4 },
+ { 50, 5 },
+ { 55, 6 },
+ { 60, 7 },
+ { 80, 8 },
+ { 100, 9 },
+ { 110, 10 },
+ { 120, 11 },
+ { 160, 12 },
+ { 200, 13 },
+ { 220, 14 },
+ { 240, 16 },
+ { 200, 17 },
+ { 320, 18 },
+ { 440, 19 },
+ { 480, 20 },
+};
+
+
+static int wm8904_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ int ret, i, best, best_val, cur_val;
+ unsigned int aif1 = 0;
+ unsigned int aif2 = 0;
+ unsigned int aif3 = 0;
+ unsigned int clock1 = 0;
+ unsigned int dac_digital1 = 0;
+
+ /* What BCLK do we need? */
+ wm8904->fs = params_rate(params);
+ if (wm8904->tdm_slots) {
+ dev_dbg(codec->dev, "Configuring for %d %d bit TDM slots\n",
+ wm8904->tdm_slots, wm8904->tdm_width);
+ wm8904->bclk = snd_soc_calc_bclk(wm8904->fs,
+ wm8904->tdm_width, 2,
+ wm8904->tdm_slots);
+ } else {
+ wm8904->bclk = snd_soc_params_to_bclk(params);
+ }
+
+ switch (params_width(params)) {
+ case 16:
+ break;
+ case 20:
+ aif1 |= 0x40;
+ break;
+ case 24:
+ aif1 |= 0x80;
+ break;
+ case 32:
+ aif1 |= 0xc0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+
+ dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm8904->bclk);
+
+ ret = wm8904_configure_clocking(codec);
+ if (ret != 0)
+ return ret;
+
+ /* Select nearest CLK_SYS_RATE */
+ best = 0;
+ best_val = abs((wm8904->sysclk_rate / clk_sys_rates[0].ratio)
+ - wm8904->fs);
+ for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
+ cur_val = abs((wm8904->sysclk_rate /
+ clk_sys_rates[i].ratio) - wm8904->fs);
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
+ clk_sys_rates[best].ratio);
+ clock1 |= (clk_sys_rates[best].clk_sys_rate
+ << WM8904_CLK_SYS_RATE_SHIFT);
+
+ /* SAMPLE_RATE */
+ best = 0;
+ best_val = abs(wm8904->fs - sample_rates[0].rate);
+ for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
+ /* Closest match */
+ cur_val = abs(wm8904->fs - sample_rates[i].rate);
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
+ sample_rates[best].rate);
+ clock1 |= (sample_rates[best].sample_rate
+ << WM8904_SAMPLE_RATE_SHIFT);
+
+ /* Enable sloping stopband filter for low sample rates */
+ if (wm8904->fs <= 24000)
+ dac_digital1 |= WM8904_DAC_SB_FILT;
+
+ /* BCLK_DIV */
+ best = 0;
+ best_val = INT_MAX;
+ for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
+ cur_val = ((wm8904->sysclk_rate * 10) / bclk_divs[i].div)
+ - wm8904->bclk;
+ if (cur_val < 0) /* Table is sorted */
+ break;
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ wm8904->bclk = (wm8904->sysclk_rate * 10) / bclk_divs[best].div;
+ dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
+ bclk_divs[best].div, wm8904->bclk);
+ aif2 |= bclk_divs[best].bclk_div;
+
+ /* LRCLK is a simple fraction of BCLK */
+ dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8904->bclk / wm8904->fs);
+ aif3 |= wm8904->bclk / wm8904->fs;
+
+ /* Apply the settings */
+ snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_1,
+ WM8904_DAC_SB_FILT, dac_digital1);
+ snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_1,
+ WM8904_AIF_WL_MASK, aif1);
+ snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_2,
+ WM8904_BCLK_DIV_MASK, aif2);
+ snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_3,
+ WM8904_LRCLK_RATE_MASK, aif3);
+ snd_soc_update_bits(codec, WM8904_CLOCK_RATES_1,
+ WM8904_SAMPLE_RATE_MASK |
+ WM8904_CLK_SYS_RATE_MASK, clock1);
+
+ /* Update filters for the new settings */
+ wm8904_set_retune_mobile(codec);
+ wm8904_set_deemph(codec);
+
+ return 0;
+}
+
+
+static int wm8904_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+ unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8904_priv *priv = snd_soc_codec_get_drvdata(codec);
+
+ switch (clk_id) {
+ case WM8904_CLK_MCLK:
+ priv->sysclk_src = clk_id;
+ priv->mclk_rate = freq;
+ break;
+
+ case WM8904_CLK_FLL:
+ priv->sysclk_src = clk_id;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ dev_dbg(dai->dev, "Clock source is %d at %uHz\n", clk_id, freq);
+
+ wm8904_configure_clocking(codec);
+
+ return 0;
+}
+
+static int wm8904_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ unsigned int aif1 = 0;
+ unsigned int aif3 = 0;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM:
+ aif3 |= WM8904_LRCLK_DIR;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ aif1 |= WM8904_BCLK_DIR;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ aif1 |= WM8904_BCLK_DIR;
+ aif3 |= WM8904_LRCLK_DIR;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_B:
+ aif1 |= 0x3 | WM8904_AIF_LRCLK_INV;
+ case SND_SOC_DAIFMT_DSP_A:
+ aif1 |= 0x3;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ aif1 |= 0x2;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ aif1 |= 0x1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
+ /* frame inversion not valid for DSP modes */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif1 |= WM8904_AIF_BCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ case SND_SOC_DAIFMT_I2S:
+ case SND_SOC_DAIFMT_RIGHT_J:
+ case SND_SOC_DAIFMT_LEFT_J:
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ aif1 |= WM8904_AIF_BCLK_INV | WM8904_AIF_LRCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif1 |= WM8904_AIF_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ aif1 |= WM8904_AIF_LRCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_1,
+ WM8904_AIF_BCLK_INV | WM8904_AIF_LRCLK_INV |
+ WM8904_AIF_FMT_MASK | WM8904_BCLK_DIR, aif1);
+ snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_3,
+ WM8904_LRCLK_DIR, aif3);
+
+ return 0;
+}
+
+
+static int wm8904_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
+ unsigned int rx_mask, int slots, int slot_width)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ int aif1 = 0;
+
+ /* Don't need to validate anything if we're turning off TDM */
+ if (slots == 0)
+ goto out;
+
+ /* Note that we allow configurations we can't handle ourselves -
+ * for example, we can generate clocks for slots 2 and up even if
+ * we can't use those slots ourselves.
+ */
+ aif1 |= WM8904_AIFADC_TDM | WM8904_AIFDAC_TDM;
+
+ switch (rx_mask) {
+ case 3:
+ break;
+ case 0xc:
+ aif1 |= WM8904_AIFADC_TDM_CHAN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+
+ switch (tx_mask) {
+ case 3:
+ break;
+ case 0xc:
+ aif1 |= WM8904_AIFDAC_TDM_CHAN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+out:
+ wm8904->tdm_width = slot_width;
+ wm8904->tdm_slots = slots / 2;
+
+ snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_1,
+ WM8904_AIFADC_TDM | WM8904_AIFADC_TDM_CHAN |
+ WM8904_AIFDAC_TDM | WM8904_AIFDAC_TDM_CHAN, aif1);
+
+ return 0;
+}
+
+struct _fll_div {
+ u16 fll_fratio;
+ u16 fll_outdiv;
+ u16 fll_clk_ref_div;
+ u16 n;
+ u16 k;
+};
+
+/* The size in bits of the FLL divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_FLL_SIZE ((1 << 16) * 10)
+
+static struct {
+ unsigned int min;
+ unsigned int max;
+ u16 fll_fratio;
+ int ratio;
+} fll_fratios[] = {
+ { 0, 64000, 4, 16 },
+ { 64000, 128000, 3, 8 },
+ { 128000, 256000, 2, 4 },
+ { 256000, 1000000, 1, 2 },
+ { 1000000, 13500000, 0, 1 },
+};
+
+static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
+ unsigned int Fout)
+{
+ u64 Kpart;
+ unsigned int K, Ndiv, Nmod, target;
+ unsigned int div;
+ int i;
+
+ /* Fref must be <=13.5MHz */
+ div = 1;
+ fll_div->fll_clk_ref_div = 0;
+ while ((Fref / div) > 13500000) {
+ div *= 2;
+ fll_div->fll_clk_ref_div++;
+
+ if (div > 8) {
+ pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
+ Fref);
+ return -EINVAL;
+ }
+ }
+
+ pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
+
+ /* Apply the division for our remaining calculations */
+ Fref /= div;
+
+ /* Fvco should be 90-100MHz; don't check the upper bound */
+ div = 4;
+ while (Fout * div < 90000000) {
+ div++;
+ if (div > 64) {
+ pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
+ Fout);
+ return -EINVAL;
+ }
+ }
+ target = Fout * div;
+ fll_div->fll_outdiv = div - 1;
+
+ pr_debug("Fvco=%dHz\n", target);
+
+ /* Find an appropriate FLL_FRATIO and factor it out of the target */
+ for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
+ if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
+ fll_div->fll_fratio = fll_fratios[i].fll_fratio;
+ target /= fll_fratios[i].ratio;
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(fll_fratios)) {
+ pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
+ return -EINVAL;
+ }
+
+ /* Now, calculate N.K */
+ Ndiv = target / Fref;
+
+ fll_div->n = Ndiv;
+ Nmod = target % Fref;
+ pr_debug("Nmod=%d\n", Nmod);
+
+ /* Calculate fractional part - scale up so we can round. */
+ Kpart = FIXED_FLL_SIZE * (long long)Nmod;
+
+ do_div(Kpart, Fref);
+
+ K = Kpart & 0xFFFFFFFF;
+
+ if ((K % 10) >= 5)
+ K += 5;
+
+ /* Move down to proper range now rounding is done */
+ fll_div->k = K / 10;
+
+ pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
+ fll_div->n, fll_div->k,
+ fll_div->fll_fratio, fll_div->fll_outdiv,
+ fll_div->fll_clk_ref_div);
+
+ return 0;
+}
+
+static int wm8904_set_fll(struct snd_soc_dai *dai, int fll_id, int source,
+ unsigned int Fref, unsigned int Fout)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ struct _fll_div fll_div;
+ int ret, val;
+ int clock2, fll1;
+
+ /* Any change? */
+ if (source == wm8904->fll_src && Fref == wm8904->fll_fref &&
+ Fout == wm8904->fll_fout)
+ return 0;
+
+ clock2 = snd_soc_read(codec, WM8904_CLOCK_RATES_2);
+
+ if (Fout == 0) {
+ dev_dbg(codec->dev, "FLL disabled\n");
+
+ wm8904->fll_fref = 0;
+ wm8904->fll_fout = 0;
+
+ /* Gate SYSCLK to avoid glitches */
+ snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
+ WM8904_CLK_SYS_ENA, 0);
+
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_OSC_ENA | WM8904_FLL_ENA, 0);
+
+ goto out;
+ }
+
+ /* Validate the FLL ID */
+ switch (source) {
+ case WM8904_FLL_MCLK:
+ case WM8904_FLL_LRCLK:
+ case WM8904_FLL_BCLK:
+ ret = fll_factors(&fll_div, Fref, Fout);
+ if (ret != 0)
+ return ret;
+ break;
+
+ case WM8904_FLL_FREE_RUNNING:
+ dev_dbg(codec->dev, "Using free running FLL\n");
+ /* Force 12MHz and output/4 for now */
+ Fout = 12000000;
+ Fref = 12000000;
+
+ memset(&fll_div, 0, sizeof(fll_div));
+ fll_div.fll_outdiv = 3;
+ break;
+
+ default:
+ dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
+ return -EINVAL;
+ }
+
+ /* Save current state then disable the FLL and SYSCLK to avoid
+ * misclocking */
+ fll1 = snd_soc_read(codec, WM8904_FLL_CONTROL_1);
+ snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
+ WM8904_CLK_SYS_ENA, 0);
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_OSC_ENA | WM8904_FLL_ENA, 0);
+
+ /* Unlock forced oscilator control to switch it on/off */
+ snd_soc_update_bits(codec, WM8904_CONTROL_INTERFACE_TEST_1,
+ WM8904_USER_KEY, WM8904_USER_KEY);
+
+ if (fll_id == WM8904_FLL_FREE_RUNNING) {
+ val = WM8904_FLL_FRC_NCO;
+ } else {
+ val = 0;
+ }
+
+ snd_soc_update_bits(codec, WM8904_FLL_NCO_TEST_1, WM8904_FLL_FRC_NCO,
+ val);
+ snd_soc_update_bits(codec, WM8904_CONTROL_INTERFACE_TEST_1,
+ WM8904_USER_KEY, 0);
+
+ switch (fll_id) {
+ case WM8904_FLL_MCLK:
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_5,
+ WM8904_FLL_CLK_REF_SRC_MASK, 0);
+ break;
+
+ case WM8904_FLL_LRCLK:
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_5,
+ WM8904_FLL_CLK_REF_SRC_MASK, 1);
+ break;
+
+ case WM8904_FLL_BCLK:
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_5,
+ WM8904_FLL_CLK_REF_SRC_MASK, 2);
+ break;
+ }
+
+ if (fll_div.k)
+ val = WM8904_FLL_FRACN_ENA;
+ else
+ val = 0;
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_FRACN_ENA, val);
+
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_2,
+ WM8904_FLL_OUTDIV_MASK | WM8904_FLL_FRATIO_MASK,
+ (fll_div.fll_outdiv << WM8904_FLL_OUTDIV_SHIFT) |
+ (fll_div.fll_fratio << WM8904_FLL_FRATIO_SHIFT));
+
+ snd_soc_write(codec, WM8904_FLL_CONTROL_3, fll_div.k);
+
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_4, WM8904_FLL_N_MASK,
+ fll_div.n << WM8904_FLL_N_SHIFT);
+
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_5,
+ WM8904_FLL_CLK_REF_DIV_MASK,
+ fll_div.fll_clk_ref_div
+ << WM8904_FLL_CLK_REF_DIV_SHIFT);
+
+ dev_dbg(codec->dev, "FLL configured for %dHz->%dHz\n", Fref, Fout);
+
+ wm8904->fll_fref = Fref;
+ wm8904->fll_fout = Fout;
+ wm8904->fll_src = source;
+
+ /* Enable the FLL if it was previously active */
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_OSC_ENA, fll1);
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_ENA, fll1);
+
+out:
+ /* Reenable SYSCLK if it was previously active */
+ snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
+ WM8904_CLK_SYS_ENA, clock2);
+
+ return 0;
+}
+
+static int wm8904_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ int val;
+
+ if (mute)
+ val = WM8904_DAC_MUTE;
+ else
+ val = 0;
+
+ snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_1, WM8904_DAC_MUTE, val);
+
+ return 0;
+}
+
+static int wm8904_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ int ret;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ clk_prepare_enable(wm8904->mclk);
+ break;
+
+ case SND_SOC_BIAS_PREPARE:
+ /* VMID resistance 2*50k */
+ snd_soc_update_bits(codec, WM8904_VMID_CONTROL_0,
+ WM8904_VMID_RES_MASK,
+ 0x1 << WM8904_VMID_RES_SHIFT);
+
+ /* Normal bias current */
+ snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
+ WM8904_ISEL_MASK, 2 << WM8904_ISEL_SHIFT);
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8904->supplies),
+ wm8904->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev,
+ "Failed to enable supplies: %d\n",
+ ret);
+ return ret;
+ }
+
+ regcache_cache_only(wm8904->regmap, false);
+ regcache_sync(wm8904->regmap);
+
+ /* Enable bias */
+ snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
+ WM8904_BIAS_ENA, WM8904_BIAS_ENA);
+
+ /* Enable VMID, VMID buffering, 2*5k resistance */
+ snd_soc_update_bits(codec, WM8904_VMID_CONTROL_0,
+ WM8904_VMID_ENA |
+ WM8904_VMID_RES_MASK,
+ WM8904_VMID_ENA |
+ 0x3 << WM8904_VMID_RES_SHIFT);
+
+ /* Let VMID ramp */
+ msleep(1);
+ }
+
+ /* Maintain VMID with 2*250k */
+ snd_soc_update_bits(codec, WM8904_VMID_CONTROL_0,
+ WM8904_VMID_RES_MASK,
+ 0x2 << WM8904_VMID_RES_SHIFT);
+
+ /* Bias current *0.5 */
+ snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
+ WM8904_ISEL_MASK, 0);
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ /* Turn off VMID */
+ snd_soc_update_bits(codec, WM8904_VMID_CONTROL_0,
+ WM8904_VMID_RES_MASK | WM8904_VMID_ENA, 0);
+
+ /* Stop bias generation */
+ snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
+ WM8904_BIAS_ENA, 0);
+
+ regcache_cache_only(wm8904->regmap, true);
+ regcache_mark_dirty(wm8904->regmap);
+
+ regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies),
+ wm8904->supplies);
+ clk_disable_unprepare(wm8904->mclk);
+ break;
+ }
+ codec->dapm.bias_level = level;
+ return 0;
+}
+
+#define WM8904_RATES SNDRV_PCM_RATE_8000_96000
+
+#define WM8904_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static const struct snd_soc_dai_ops wm8904_dai_ops = {
+ .set_sysclk = wm8904_set_sysclk,
+ .set_fmt = wm8904_set_fmt,
+ .set_tdm_slot = wm8904_set_tdm_slot,
+ .set_pll = wm8904_set_fll,
+ .hw_params = wm8904_hw_params,
+ .digital_mute = wm8904_digital_mute,
+};
+
+static struct snd_soc_dai_driver wm8904_dai = {
+ .name = "wm8904-hifi",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8904_RATES,
+ .formats = WM8904_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8904_RATES,
+ .formats = WM8904_FORMATS,
+ },
+ .ops = &wm8904_dai_ops,
+ .symmetric_rates = 1,
+};
+
+static void wm8904_handle_retune_mobile_pdata(struct snd_soc_codec *codec)
+{
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ struct wm8904_pdata *pdata = wm8904->pdata;
+ struct snd_kcontrol_new control =
+ SOC_ENUM_EXT("EQ Mode",
+ wm8904->retune_mobile_enum,
+ wm8904_get_retune_mobile_enum,
+ wm8904_put_retune_mobile_enum);
+ int ret, i, j;
+ const char **t;
+
+ /* We need an array of texts for the enum API but the number
+ * of texts is likely to be less than the number of
+ * configurations due to the sample rate dependency of the
+ * configurations. */
+ wm8904->num_retune_mobile_texts = 0;
+ wm8904->retune_mobile_texts = NULL;
+ for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) {
+ for (j = 0; j < wm8904->num_retune_mobile_texts; j++) {
+ if (strcmp(pdata->retune_mobile_cfgs[i].name,
+ wm8904->retune_mobile_texts[j]) == 0)
+ break;
+ }
+
+ if (j != wm8904->num_retune_mobile_texts)
+ continue;
+
+ /* Expand the array... */
+ t = krealloc(wm8904->retune_mobile_texts,
+ sizeof(char *) *
+ (wm8904->num_retune_mobile_texts + 1),
+ GFP_KERNEL);
+ if (t == NULL)
+ continue;
+
+ /* ...store the new entry... */
+ t[wm8904->num_retune_mobile_texts] =
+ pdata->retune_mobile_cfgs[i].name;
+
+ /* ...and remember the new version. */
+ wm8904->num_retune_mobile_texts++;
+ wm8904->retune_mobile_texts = t;
+ }
+
+ dev_dbg(codec->dev, "Allocated %d unique ReTune Mobile names\n",
+ wm8904->num_retune_mobile_texts);
+
+ wm8904->retune_mobile_enum.items = wm8904->num_retune_mobile_texts;
+ wm8904->retune_mobile_enum.texts = wm8904->retune_mobile_texts;
+
+ ret = snd_soc_add_codec_controls(codec, &control, 1);
+ if (ret != 0)
+ dev_err(codec->dev,
+ "Failed to add ReTune Mobile control: %d\n", ret);
+}
+
+static void wm8904_handle_pdata(struct snd_soc_codec *codec)
+{
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ struct wm8904_pdata *pdata = wm8904->pdata;
+ int ret, i;
+
+ if (!pdata) {
+ snd_soc_add_codec_controls(codec, wm8904_eq_controls,
+ ARRAY_SIZE(wm8904_eq_controls));
+ return;
+ }
+
+ dev_dbg(codec->dev, "%d DRC configurations\n", pdata->num_drc_cfgs);
+
+ if (pdata->num_drc_cfgs) {
+ struct snd_kcontrol_new control =
+ SOC_ENUM_EXT("DRC Mode", wm8904->drc_enum,
+ wm8904_get_drc_enum, wm8904_put_drc_enum);
+
+ /* We need an array of texts for the enum API */
+ wm8904->drc_texts = kmalloc(sizeof(char *)
+ * pdata->num_drc_cfgs, GFP_KERNEL);
+ if (!wm8904->drc_texts)
+ return;
+
+ for (i = 0; i < pdata->num_drc_cfgs; i++)
+ wm8904->drc_texts[i] = pdata->drc_cfgs[i].name;
+
+ wm8904->drc_enum.items = pdata->num_drc_cfgs;
+ wm8904->drc_enum.texts = wm8904->drc_texts;
+
+ ret = snd_soc_add_codec_controls(codec, &control, 1);
+ if (ret != 0)
+ dev_err(codec->dev,
+ "Failed to add DRC mode control: %d\n", ret);
+
+ wm8904_set_drc(codec);
+ }
+
+ dev_dbg(codec->dev, "%d ReTune Mobile configurations\n",
+ pdata->num_retune_mobile_cfgs);
+
+ if (pdata->num_retune_mobile_cfgs)
+ wm8904_handle_retune_mobile_pdata(codec);
+ else
+ snd_soc_add_codec_controls(codec, wm8904_eq_controls,
+ ARRAY_SIZE(wm8904_eq_controls));
+}
+
+
+static int wm8904_probe(struct snd_soc_codec *codec)
+{
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+
+ switch (wm8904->devtype) {
+ case WM8904:
+ break;
+ case WM8912:
+ memset(&wm8904_dai.capture, 0, sizeof(wm8904_dai.capture));
+ break;
+ default:
+ dev_err(codec->dev, "Unknown device type %d\n",
+ wm8904->devtype);
+ return -EINVAL;
+ }
+
+ wm8904_handle_pdata(codec);
+
+ wm8904_add_widgets(codec);
+
+ return 0;
+}
+
+static int wm8904_remove(struct snd_soc_codec *codec)
+{
+ struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+
+ kfree(wm8904->retune_mobile_texts);
+ kfree(wm8904->drc_texts);
+
+ return 0;
+}
+
+static struct snd_soc_codec_driver soc_codec_dev_wm8904 = {
+ .probe = wm8904_probe,
+ .remove = wm8904_remove,
+ .set_bias_level = wm8904_set_bias_level,
+ .idle_bias_off = true,
+};
+
+static const struct regmap_config wm8904_regmap = {
+ .reg_bits = 8,
+ .val_bits = 16,
+
+ .max_register = WM8904_MAX_REGISTER,
+ .volatile_reg = wm8904_volatile_register,
+ .readable_reg = wm8904_readable_register,
+
+ .cache_type = REGCACHE_RBTREE,
+ .reg_defaults = wm8904_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(wm8904_reg_defaults),
+};
+
+#ifdef CONFIG_OF
+static enum wm8904_type wm8904_data = WM8904;
+static enum wm8904_type wm8912_data = WM8912;
+
+static const struct of_device_id wm8904_of_match[] = {
+ {
+ .compatible = "wlf,wm8904",
+ .data = &wm8904_data,
+ }, {
+ .compatible = "wlf,wm8912",
+ .data = &wm8912_data,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, wm8904_of_match);
+#endif
+
+static int wm8904_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8904_priv *wm8904;
+ unsigned int val;
+ int ret, i;
+
+ wm8904 = devm_kzalloc(&i2c->dev, sizeof(struct wm8904_priv),
+ GFP_KERNEL);
+ if (wm8904 == NULL)
+ return -ENOMEM;
+
+ wm8904->mclk = devm_clk_get(&i2c->dev, "mclk");
+ if (IS_ERR(wm8904->mclk)) {
+ ret = PTR_ERR(wm8904->mclk);
+ dev_err(&i2c->dev, "Failed to get MCLK\n");
+ return ret;
+ }
+
+ wm8904->regmap = devm_regmap_init_i2c(i2c, &wm8904_regmap);
+ if (IS_ERR(wm8904->regmap)) {
+ ret = PTR_ERR(wm8904->regmap);
+ dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ if (i2c->dev.of_node) {
+ const struct of_device_id *match;
+
+ match = of_match_node(wm8904_of_match, i2c->dev.of_node);
+ if (match == NULL)
+ return -EINVAL;
+ wm8904->devtype = *((enum wm8904_type *)match->data);
+ } else {
+ wm8904->devtype = id->driver_data;
+ }
+
+ i2c_set_clientdata(i2c, wm8904);
+ wm8904->pdata = i2c->dev.platform_data;
+
+ for (i = 0; i < ARRAY_SIZE(wm8904->supplies); i++)
+ wm8904->supplies[i].supply = wm8904_supply_names[i];
+
+ ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8904->supplies),
+ wm8904->supplies);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
+ return ret;
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8904->supplies),
+ wm8904->supplies);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_read(wm8904->regmap, WM8904_SW_RESET_AND_ID, &val);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to read ID register: %d\n", ret);
+ goto err_enable;
+ }
+ if (val != 0x8904) {
+ dev_err(&i2c->dev, "Device is not a WM8904, ID is %x\n", val);
+ ret = -EINVAL;
+ goto err_enable;
+ }
+
+ ret = regmap_read(wm8904->regmap, WM8904_REVISION, &val);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to read device revision: %d\n",
+ ret);
+ goto err_enable;
+ }
+ dev_info(&i2c->dev, "revision %c\n", val + 'A');
+
+ ret = regmap_write(wm8904->regmap, WM8904_SW_RESET_AND_ID, 0);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to issue reset: %d\n", ret);
+ goto err_enable;
+ }
+
+ /* Change some default settings - latch VU and enable ZC */
+ regmap_update_bits(wm8904->regmap, WM8904_ADC_DIGITAL_VOLUME_LEFT,
+ WM8904_ADC_VU, WM8904_ADC_VU);
+ regmap_update_bits(wm8904->regmap, WM8904_ADC_DIGITAL_VOLUME_RIGHT,
+ WM8904_ADC_VU, WM8904_ADC_VU);
+ regmap_update_bits(wm8904->regmap, WM8904_DAC_DIGITAL_VOLUME_LEFT,
+ WM8904_DAC_VU, WM8904_DAC_VU);
+ regmap_update_bits(wm8904->regmap, WM8904_DAC_DIGITAL_VOLUME_RIGHT,
+ WM8904_DAC_VU, WM8904_DAC_VU);
+ regmap_update_bits(wm8904->regmap, WM8904_ANALOGUE_OUT1_LEFT,
+ WM8904_HPOUT_VU | WM8904_HPOUTLZC,
+ WM8904_HPOUT_VU | WM8904_HPOUTLZC);
+ regmap_update_bits(wm8904->regmap, WM8904_ANALOGUE_OUT1_RIGHT,
+ WM8904_HPOUT_VU | WM8904_HPOUTRZC,
+ WM8904_HPOUT_VU | WM8904_HPOUTRZC);
+ regmap_update_bits(wm8904->regmap, WM8904_ANALOGUE_OUT2_LEFT,
+ WM8904_LINEOUT_VU | WM8904_LINEOUTLZC,
+ WM8904_LINEOUT_VU | WM8904_LINEOUTLZC);
+ regmap_update_bits(wm8904->regmap, WM8904_ANALOGUE_OUT2_RIGHT,
+ WM8904_LINEOUT_VU | WM8904_LINEOUTRZC,
+ WM8904_LINEOUT_VU | WM8904_LINEOUTRZC);
+ regmap_update_bits(wm8904->regmap, WM8904_CLOCK_RATES_0,
+ WM8904_SR_MODE, 0);
+
+ /* Apply configuration from the platform data. */
+ if (wm8904->pdata) {
+ for (i = 0; i < WM8904_GPIO_REGS; i++) {
+ if (!wm8904->pdata->gpio_cfg[i])
+ continue;
+
+ regmap_update_bits(wm8904->regmap,
+ WM8904_GPIO_CONTROL_1 + i,
+ 0xffff,
+ wm8904->pdata->gpio_cfg[i]);
+ }
+
+ /* Zero is the default value for these anyway */
+ for (i = 0; i < WM8904_MIC_REGS; i++)
+ regmap_update_bits(wm8904->regmap,
+ WM8904_MIC_BIAS_CONTROL_0 + i,
+ 0xffff,
+ wm8904->pdata->mic_cfg[i]);
+ }
+
+ /* Set Class W by default - this will be managed by the Class
+ * G widget at runtime where bypass paths are available.
+ */
+ regmap_update_bits(wm8904->regmap, WM8904_CLASS_W_0,
+ WM8904_CP_DYN_PWR, WM8904_CP_DYN_PWR);
+
+ /* Use normal bias source */
+ regmap_update_bits(wm8904->regmap, WM8904_BIAS_CONTROL_0,
+ WM8904_POBCTRL, 0);
+
+ /* Can leave the device powered off until we need it */
+ regcache_cache_only(wm8904->regmap, true);
+ regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
+
+ ret = snd_soc_register_codec(&i2c->dev,
+ &soc_codec_dev_wm8904, &wm8904_dai, 1);
+ if (ret != 0)
+ return ret;
+
+ return 0;
+
+err_enable:
+ regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
+ return ret;
+}
+
+static int wm8904_i2c_remove(struct i2c_client *client)
+{
+ snd_soc_unregister_codec(&client->dev);
+ return 0;
+}
+
+static const struct i2c_device_id wm8904_i2c_id[] = {
+ { "wm8904", WM8904 },
+ { "wm8912", WM8912 },
+ { "wm8918", WM8904 }, /* Actually a subset, updates to follow */
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8904_i2c_id);
+
+static struct i2c_driver wm8904_i2c_driver = {
+ .driver = {
+ .name = "wm8904",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(wm8904_of_match),
+ },
+ .probe = wm8904_i2c_probe,
+ .remove = wm8904_i2c_remove,
+ .id_table = wm8904_i2c_id,
+};
+
+module_i2c_driver(wm8904_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC WM8904 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");