diff options
Diffstat (limited to 'sound/soc/omap/Kconfig')
| -rw-r--r-- | sound/soc/omap/Kconfig | 124 |
1 files changed, 124 insertions, 0 deletions
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig new file mode 100644 index 000000000..30d010970 --- /dev/null +++ b/sound/soc/omap/Kconfig @@ -0,0 +1,124 @@ +config SND_OMAP_SOC + tristate "SoC Audio for the Texas Instruments OMAP chips" + depends on (ARCH_OMAP && DMA_OMAP) || (ARM && COMPILE_TEST) + select SND_DMAENGINE_PCM + +config SND_OMAP_SOC_DMIC + tristate + +config SND_OMAP_SOC_MCBSP + tristate + +config SND_OMAP_SOC_MCPDM + tristate + +config SND_OMAP_SOC_HDMI_AUDIO + tristate "HDMI audio support for OMAP4+ based SoCs" + depends on SND_OMAP_SOC + help + For HDMI audio to work OMAPDSS HDMI support should be + enabled. + The hdmi audio driver implements cpu-dai component using the + callbacks provided by OMAPDSS and registers the component + under DSS HDMI device. Omap-pcm is registered for platform + component also under DSS HDMI device. Dummy codec is used as + as codec component. The hdmi audio driver implements also + the card and registers it under its own platform device. + The device for the dirver is registered by OMAPDSS hdmi + driver. + +config SND_OMAP_SOC_N810 + tristate "SoC Audio support for Nokia N810" + depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C + depends on OMAP_MUX + select SND_OMAP_SOC_MCBSP + select SND_SOC_TLV320AIC3X + help + Say Y if you want to add support for SoC audio on Nokia N810. + +config SND_OMAP_SOC_RX51 + tristate "SoC Audio support for Nokia N900 (RX-51)" + depends on SND_OMAP_SOC && ARM && I2C + select SND_OMAP_SOC_MCBSP + select SND_SOC_TLV320AIC3X + select SND_SOC_TPA6130A2 + depends on GPIOLIB + help + Say Y if you want to add support for SoC audio on Nokia N900 + cellphone. + +config SND_OMAP_SOC_AMS_DELTA + tristate "SoC Audio support for Amstrad E3 (Delta) videophone" + depends on SND_OMAP_SOC && MACH_AMS_DELTA && TTY + select SND_OMAP_SOC_MCBSP + select SND_SOC_CX20442 + help + Say Y if you want to add support for SoC audio device connected to + a handset and a speakerphone found on Amstrad E3 (Delta) videophone. + + Note that in order to get those devices fully supported, you have to + build the kernel with standard serial port driver included and + configured for at least 4 ports. Then, from userspace, you must load + a line discipline #19 on the modem (ttyS3) serial line. The simplest + way to achieve this is to install util-linux-ng and use the included + ldattach utility. This can be started automatically from udev, + a simple rule like this one should do the trick (it does for me): + ACTION=="add", KERNEL=="controlC0", \ + RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" + +config SND_OMAP_SOC_OSK5912 + tristate "SoC Audio support for omap osk5912" + depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C + select SND_OMAP_SOC_MCBSP + select SND_SOC_TLV320AIC23_I2C + help + Say Y if you want to add support for SoC audio on osk5912. + +config SND_OMAP_SOC_AM3517EVM + tristate "SoC Audio support for OMAP3517 / AM3517 EVM" + depends on SND_OMAP_SOC && MACH_OMAP3517EVM && I2C + select SND_OMAP_SOC_MCBSP + select SND_SOC_TLV320AIC23_I2C + help + Say Y if you want to add support for SoC audio on the OMAP3517 / AM3517 + EVM. + +config SND_OMAP_SOC_OMAP_TWL4030 + tristate "SoC Audio support for TI SoC based boards with twl4030 codec" + depends on TWL4030_CORE && SND_OMAP_SOC + select SND_OMAP_SOC_MCBSP + select SND_SOC_TWL4030 + help + Say Y if you want to add support for SoC audio on TI SoC based boards + using twl4030 as c codec. This driver currently supports: + - Beagleboard or Devkit8000 + - Gumstix Overo or CompuLab CM-T35/CM-T3730 + - IGEP v2 + - OMAP3EVM + - SDP3430 + - Zoom2 + +config SND_OMAP_SOC_OMAP_ABE_TWL6040 + tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" + depends on TWL6040_CORE && SND_OMAP_SOC + depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST + select SND_OMAP_SOC_DMIC + select SND_OMAP_SOC_MCPDM + select SND_SOC_TWL6040 + select SND_SOC_DMIC + select COMMON_CLK_PALMAS if (SOC_OMAP5 && MFD_PALMAS) + help + Say Y if you want to add support for SoC audio on OMAP boards using + ABE and twl6040 codec. This driver currently supports: + - SDP4430/Blaze boards + - PandaBoard (4430) + - PandaBoardES (4460) + - omap5-uevm (5432) + +config SND_OMAP_SOC_OMAP3_PANDORA + tristate "SoC Audio support for OMAP3 Pandora" + depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA + select SND_OMAP_SOC_MCBSP + select SND_SOC_TWL4030 + help + Say Y if you want to add support for SoC audio on the OMAP3 Pandora. |