diff options
Diffstat (limited to 'sound/soc/samsung/Kconfig')
| -rw-r--r-- | sound/soc/samsung/Kconfig | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig new file mode 100644 index 000000000..0632a3685 --- /dev/null +++ b/sound/soc/samsung/Kconfig @@ -0,0 +1,236 @@ +config SND_SOC_SAMSUNG + tristate "ASoC support for Samsung" + depends on (PLAT_SAMSUNG || ARCH_EXYNOS) + depends on S3C64XX_PL080 || !ARCH_S3C64XX + depends on S3C24XX_DMAC || !ARCH_S3C24XX + select SND_SOC_GENERIC_DMAENGINE_PCM + help + Say Y or M if you want to add support for codecs attached to + the Samsung SoCs' Audio interfaces. You will also need to + select the audio interfaces to support below. + +config SND_S3C24XX_I2S + tristate + +config SND_S3C_I2SV2_SOC + tristate + +config SND_S3C2412_SOC_I2S + tristate + select SND_S3C_I2SV2_SOC + +config SND_SAMSUNG_PCM + tristate + +config SND_SAMSUNG_AC97 + tristate + select SND_SOC_AC97_BUS + +config SND_SAMSUNG_SPDIF + tristate + select SND_SOC_SPDIF + +config SND_SAMSUNG_I2S + tristate + +config SND_SOC_SAMSUNG_NEO1973_WM8753 + tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)" + depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA02 + select SND_S3C24XX_I2S + select SND_SOC_WM8753 + select SND_SOC_BT_SCO + help + Say Y here to enable audio support for the Openmoko Neo1973 + Smartphones. + +config SND_SOC_SAMSUNG_JIVE_WM8750 + tristate "SoC I2S Audio support for Jive" + depends on SND_SOC_SAMSUNG && MACH_JIVE && I2C + select SND_SOC_WM8750 + select SND_S3C2412_SOC_I2S + help + Say Y if you want to add support for SoC audio on the Jive. + +config SND_SOC_SAMSUNG_SMDK_WM8580 + tristate "SoC I2S Audio support for WM8580 on SMDK" + depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110) + depends on I2C + select SND_SOC_WM8580 + select SND_SAMSUNG_I2S + help + Say Y if you want to add support for SoC audio on the SMDKs. + +config SND_SOC_SAMSUNG_SMDK_WM8994 + tristate "SoC I2S Audio support for WM8994 on SMDK" + depends on SND_SOC_SAMSUNG + depends on I2C=y + select MFD_WM8994 + select SND_SOC_WM8994 + select SND_SAMSUNG_I2S + help + Say Y if you want to add support for SoC audio on the SMDKs. + +config SND_SOC_SAMSUNG_SMDK2443_WM9710 + tristate "SoC AC97 Audio support for SMDK2443 - WM9710" + depends on SND_SOC_SAMSUNG && MACH_SMDK2443 + select AC97_BUS + select SND_SOC_AC97_CODEC + select SND_SAMSUNG_AC97 + help + Say Y if you want to add support for SoC audio on smdk2443 + with the WM9710. + +config SND_SOC_SAMSUNG_LN2440SBC_ALC650 + tristate "SoC AC97 Audio support for LN2440SBC - ALC650" + depends on SND_SOC_SAMSUNG && ARCH_S3C24XX + select AC97_BUS + select SND_SOC_AC97_CODEC + select SND_SAMSUNG_AC97 + help + Say Y if you want to add support for SoC audio on ln2440sbc + with the ALC650. + +config SND_SOC_SAMSUNG_S3C24XX_UDA134X + tristate "SoC I2S Audio support UDA134X wired to a S3C24XX" + depends on SND_SOC_SAMSUNG && ARCH_S3C24XX + select SND_S3C24XX_I2S + select SND_SOC_L3 + select SND_SOC_UDA134X + +config SND_SOC_SAMSUNG_SIMTEC + tristate + help + Internal node for common S3C24XX/Simtec suppor + +config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23 + tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards" + depends on SND_SOC_SAMSUNG && ARCH_S3C24XX && I2C + select SND_S3C24XX_I2S + select SND_SOC_TLV320AIC23_I2C + select SND_SOC_SAMSUNG_SIMTEC + +config SND_SOC_SAMSUNG_SIMTEC_HERMES + tristate "SoC I2S Audio support for Simtec Hermes board" + depends on SND_SOC_SAMSUNG && ARCH_S3C24XX && I2C + select SND_S3C24XX_I2S + select SND_SOC_TLV320AIC3X + select SND_SOC_SAMSUNG_SIMTEC + +config SND_SOC_SAMSUNG_H1940_UDA1380 + tristate "Audio support for the HP iPAQ H1940" + depends on SND_SOC_SAMSUNG && ARCH_H1940 && I2C + select SND_S3C24XX_I2S + select SND_SOC_UDA1380 + help + This driver provides audio support for HP iPAQ h1940 PDA. + +config SND_SOC_SAMSUNG_RX1950_UDA1380 + tristate "Audio support for the HP iPAQ RX1950" + depends on SND_SOC_SAMSUNG && MACH_RX1950 && I2C + select SND_S3C24XX_I2S + select SND_SOC_UDA1380 + help + This driver provides audio support for HP iPAQ RX1950 PDA. + +config SND_SOC_SAMSUNG_SMDK_WM9713 + tristate "SoC AC97 Audio support for SMDK with WM9713" + depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110) + select SND_SOC_WM9713 + select SND_SAMSUNG_AC97 + help + Say Y if you want to add support for SoC audio on the SMDK. + +config SND_SOC_SMARTQ + tristate "SoC I2S Audio support for SmartQ board" + depends on SND_SOC_SAMSUNG && MACH_SMARTQ && I2C + select SND_SAMSUNG_I2S + select SND_SOC_WM8750 + +config SND_SOC_SAMSUNG_SMDK_SPDIF + tristate "SoC S/PDIF Audio support for SMDK" + depends on SND_SOC_SAMSUNG + select SND_SAMSUNG_SPDIF + help + Say Y if you want to add support for SoC S/PDIF audio on the SMDK. + +config SND_SOC_SMDK_WM8580_PCM + tristate "SoC PCM Audio support for WM8580 on SMDK" + depends on SND_SOC_SAMSUNG && (MACH_SMDKV210 || MACH_SMDKC110) + depends on I2C + select SND_SOC_WM8580 + select SND_SAMSUNG_PCM + help + Say Y if you want to add support for SoC audio on the SMDK. + +config SND_SOC_SMDK_WM8994_PCM + tristate "SoC PCM Audio support for WM8994 on SMDK" + depends on SND_SOC_SAMSUNG + depends on I2C=y + select MFD_WM8994 + select SND_SOC_WM8994 + select SND_SAMSUNG_PCM + help + Say Y if you want to add support for SoC audio on the SMDK + +config SND_SOC_SPEYSIDE + tristate "Audio support for Wolfson Speyside" + depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && I2C && SPI_MASTER + select SND_SAMSUNG_I2S + select SND_SOC_WM8996 + select SND_SOC_WM9081 + select SND_SOC_WM0010 + select SND_SOC_WM1250_EV1 + +config SND_SOC_TOBERMORY + tristate "Audio support for Wolfson Tobermory" + depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && INPUT && I2C + select SND_SAMSUNG_I2S + select SND_SOC_WM8962 + +config SND_SOC_BELLS + tristate "Audio support for Wolfson Bells" + depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && MFD_ARIZONA && I2C && SPI_MASTER + select SND_SAMSUNG_I2S + select SND_SOC_WM5102 + select SND_SOC_WM5110 + select SND_SOC_WM9081 + select SND_SOC_WM0010 + select SND_SOC_WM1250_EV1 + +config SND_SOC_LOWLAND + tristate "Audio support for Wolfson Lowland" + depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && I2C + select SND_SAMSUNG_I2S + select SND_SOC_WM5100 + select SND_SOC_WM9081 + +config SND_SOC_LITTLEMILL + tristate "Audio support for Wolfson Littlemill" + depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && I2C + select SND_SAMSUNG_I2S + select MFD_WM8994 + select SND_SOC_WM8994 + +config SND_SOC_SNOW + tristate "Audio support for Google Snow boards" + depends on SND_SOC_SAMSUNG && I2C + select SND_SOC_MAX98090 + select SND_SOC_MAX98095 + select SND_SAMSUNG_I2S + help + Say Y if you want to add audio support for various Snow + boards based on Exynos5 series of SoCs. + +config SND_SOC_ODROIDX2 + tristate "Audio support for Odroid-X2 and Odroid-U3" + depends on SND_SOC_SAMSUNG && I2C + select SND_SOC_MAX98090 + select SND_SAMSUNG_I2S + help + Say Y here to enable audio support for the Odroid-X2/U3. + +config SND_SOC_ARNDALE_RT5631_ALC5631 + tristate "Audio support for RT5631(ALC5631) on Arndale Board" + depends on SND_SOC_SAMSUNG && I2C + select SND_SAMSUNG_I2S + select SND_SOC_RT5631 |