diff options
Diffstat (limited to 'sound/soc/soc-pcm.c')
| -rw-r--r-- | sound/soc/soc-pcm.c | 59 |
1 files changed, 53 insertions, 6 deletions
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 70e4b9d8b..c86dc96e8 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -34,6 +34,24 @@ #define DPCM_MAX_BE_USERS 8 +/* + * snd_soc_dai_stream_valid() - check if a DAI supports the given stream + * + * Returns true if the DAI supports the indicated stream type. + */ +static bool snd_soc_dai_stream_valid(struct snd_soc_dai *dai, int stream) +{ + struct snd_soc_pcm_stream *codec_stream; + + if (stream == SNDRV_PCM_STREAM_PLAYBACK) + codec_stream = &dai->driver->playback; + else + codec_stream = &dai->driver->capture; + + /* If the codec specifies any rate at all, it supports the stream. */ + return codec_stream->rates; +} + /** * snd_soc_runtime_activate() - Increment active count for PCM runtime components * @rtd: ASoC PCM runtime that is activated @@ -182,9 +200,9 @@ static int soc_pcm_apply_symmetry(struct snd_pcm_substream *substream, dev_dbg(soc_dai->dev, "ASoC: Symmetry forces %dHz rate\n", soc_dai->rate); - ret = snd_pcm_hw_constraint_minmax(substream->runtime, + ret = snd_pcm_hw_constraint_single(substream->runtime, SNDRV_PCM_HW_PARAM_RATE, - soc_dai->rate, soc_dai->rate); + soc_dai->rate); if (ret < 0) { dev_err(soc_dai->dev, "ASoC: Unable to apply rate constraint: %d\n", @@ -198,9 +216,8 @@ static int soc_pcm_apply_symmetry(struct snd_pcm_substream *substream, dev_dbg(soc_dai->dev, "ASoC: Symmetry forces %d channel(s)\n", soc_dai->channels); - ret = snd_pcm_hw_constraint_minmax(substream->runtime, + ret = snd_pcm_hw_constraint_single(substream->runtime, SNDRV_PCM_HW_PARAM_CHANNELS, - soc_dai->channels, soc_dai->channels); if (ret < 0) { dev_err(soc_dai->dev, @@ -215,9 +232,8 @@ static int soc_pcm_apply_symmetry(struct snd_pcm_substream *substream, dev_dbg(soc_dai->dev, "ASoC: Symmetry forces %d sample bits\n", soc_dai->sample_bits); - ret = snd_pcm_hw_constraint_minmax(substream->runtime, + ret = snd_pcm_hw_constraint_single(substream->runtime, SNDRV_PCM_HW_PARAM_SAMPLE_BITS, - soc_dai->sample_bits, soc_dai->sample_bits); if (ret < 0) { dev_err(soc_dai->dev, @@ -371,6 +387,20 @@ static void soc_pcm_init_runtime_hw(struct snd_pcm_substream *substream) /* first calculate min/max only for CODECs in the DAI link */ for (i = 0; i < rtd->num_codecs; i++) { + + /* + * Skip CODECs which don't support the current stream type. + * Otherwise, since the rate, channel, and format values will + * zero in that case, we would have no usable settings left, + * causing the resulting setup to fail. + * At least one CODEC should match, otherwise we should have + * bailed out on a higher level, since there would be no + * CODEC to support the transfer direction in that case. + */ + if (!snd_soc_dai_stream_valid(rtd->codec_dais[i], + substream->stream)) + continue; + codec_dai_drv = rtd->codec_dais[i]->driver; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) codec_stream = &codec_dai_drv->playback; @@ -827,6 +857,23 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_soc_dai *codec_dai = rtd->codec_dais[i]; struct snd_pcm_hw_params codec_params; + /* + * Skip CODECs which don't support the current stream type, + * the idea being that if a CODEC is not used for the currently + * set up transfer direction, it should not need to be + * configured, especially since the configuration used might + * not even be supported by that CODEC. There may be cases + * however where a CODEC needs to be set up although it is + * actually not being used for the transfer, e.g. if a + * capture-only CODEC is acting as an LRCLK and/or BCLK master + * for the DAI link including a playback-only CODEC. + * If this becomes necessary, we will have to augment the + * machine driver setup with information on how to act, so + * we can do the right thing here. + */ + if (!snd_soc_dai_stream_valid(codec_dai, substream->stream)) + continue; + /* copy params for each codec */ codec_params = *params; |