diff options
Diffstat (limited to 'sound/soc/tegra/Kconfig')
| -rw-r--r-- | sound/soc/tegra/Kconfig | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig new file mode 100644 index 000000000..a6768f832 --- /dev/null +++ b/sound/soc/tegra/Kconfig @@ -0,0 +1,140 @@ +config SND_SOC_TEGRA + tristate "SoC Audio for the Tegra System-on-Chip" + depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST + depends on COMMON_CLK + depends on RESET_CONTROLLER + select REGMAP_MMIO + select SND_SOC_GENERIC_DMAENGINE_PCM + help + Say Y or M here if you want support for SoC audio on Tegra. + +config SND_SOC_TEGRA20_AC97 + tristate + depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC + select SND_SOC_AC97_BUS + select SND_SOC_TEGRA20_DAS + help + Say Y or M if you want to add support for codecs attached to the + Tegra20 AC97 interface. You will also need to select the individual + machine drivers to support below. + +config SND_SOC_TEGRA20_DAS + tristate + depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC + help + Say Y or M if you want to add support for the Tegra20 DAS module. + You will also need to select the individual machine drivers to + support below. + +config SND_SOC_TEGRA20_I2S + tristate + depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC + select SND_SOC_TEGRA20_DAS + help + Say Y or M if you want to add support for codecs attached to the + Tegra20 I2S interface. You will also need to select the individual + machine drivers to support below. + +config SND_SOC_TEGRA20_SPDIF + tristate + depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC + default m + help + Say Y or M if you want to add support for the Tegra20 SPDIF interface. + You will also need to select the individual machine drivers to support + below. + +config SND_SOC_TEGRA30_AHUB + tristate + depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC + help + Say Y or M if you want to add support for the Tegra20 AHUB module. + You will also need to select the individual machine drivers to + support below. + +config SND_SOC_TEGRA30_I2S + tristate + depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC + select SND_SOC_TEGRA30_AHUB + help + Say Y or M if you want to add support for codecs attached to the + Tegra30 I2S interface. You will also need to select the individual + machine drivers to support below. + +config SND_SOC_TEGRA_RT5640 + tristate "SoC Audio support for Tegra boards using an RT5640 codec" + depends on SND_SOC_TEGRA && I2C && GPIOLIB + select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC + select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC + select SND_SOC_RT5640 + help + Say Y or M here if you want to add support for SoC audio on Tegra + boards using the RT5640 codec, such as Dalmore. + +config SND_SOC_TEGRA_WM8753 + tristate "SoC Audio support for Tegra boards using a WM8753 codec" + depends on SND_SOC_TEGRA && I2C && GPIOLIB + select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC + select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC + select SND_SOC_WM8753 + help + Say Y or M here if you want to add support for SoC audio on Tegra + boards using the WM8753 codec, such as Whistler. + +config SND_SOC_TEGRA_WM8903 + tristate "SoC Audio support for Tegra boards using a WM8903 codec" + depends on SND_SOC_TEGRA && I2C && GPIOLIB + select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC + select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC + select SND_SOC_WM8903 + help + Say Y or M here if you want to add support for SoC audio on Tegra + boards using the WM8093 codec. Currently, the supported boards are + Harmony, Ventana, Seaboard, Kaen, and Aebl. + +config SND_SOC_TEGRA_WM9712 + tristate "SoC Audio support for Tegra boards using a WM9712 codec" + depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC && GPIOLIB + select SND_SOC_TEGRA20_AC97 + select SND_SOC_WM9712 + help + Say Y or M here if you want to add support for SoC audio on Tegra + boards using the WM9712 (or compatible) codec. + +config SND_SOC_TEGRA_TRIMSLICE + tristate "SoC Audio support for TrimSlice board" + depends on SND_SOC_TEGRA && I2C + select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC + select SND_SOC_TLV320AIC23_I2C + help + Say Y or M here if you want to add support for SoC audio on the + TrimSlice platform. + +config SND_SOC_TEGRA_ALC5632 + tristate "SoC Audio support for Tegra boards using an ALC5632 codec" + depends on SND_SOC_TEGRA && I2C && GPIOLIB + select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC + select SND_SOC_ALC5632 + help + Say Y or M here if you want to add support for SoC audio on the + Toshiba AC100 netbook. + +config SND_SOC_TEGRA_MAX98090 + tristate "SoC Audio support for Tegra boards using a MAX98090 codec" + depends on SND_SOC_TEGRA && I2C && GPIOLIB + select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC + select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC + select SND_SOC_MAX98090 + help + Say Y or M here if you want to add support for SoC audio on Tegra + boards using the MAX98090 codec, such as Venice2. + +config SND_SOC_TEGRA_RT5677 + tristate "SoC Audio support for Tegra boards using a RT5677 codec" + depends on SND_SOC_TEGRA && I2C && GPIOLIB + select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC + select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC + select SND_SOC_RT5677 + help + Say Y or M here if you want to add support for SoC audio on Tegra + boards using the RT5677 codec, such as Ryu. |