From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- Documentation/ABI/testing/sysfs-class-net-mesh | 108 +++++++++++++++++++++++++ 1 file changed, 108 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-net-mesh (limited to 'Documentation/ABI/testing/sysfs-class-net-mesh') diff --git a/Documentation/ABI/testing/sysfs-class-net-mesh b/Documentation/ABI/testing/sysfs-class-net-mesh new file mode 100644 index 000000000..c46406296 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-net-mesh @@ -0,0 +1,108 @@ + +What: /sys/class/net//mesh/aggregated_ogms +Date: May 2010 +Contact: Marek Lindner +Description: + Indicates whether the batman protocol messages of the + mesh shall be aggregated or not. + +What: /sys/class/net//mesh//ap_isolation +Date: May 2011 +Contact: Antonio Quartulli +Description: + Indicates whether the data traffic going from a + wireless client to another wireless client will be + silently dropped. is empty when referring + to the untagged lan. + +What: /sys/class/net//mesh/bonding +Date: June 2010 +Contact: Simon Wunderlich +Description: + Indicates whether the data traffic going through the + mesh will be sent using multiple interfaces at the + same time (if available). + +What: /sys/class/net//mesh/bridge_loop_avoidance +Date: November 2011 +Contact: Simon Wunderlich +Description: + Indicates whether the bridge loop avoidance feature + is enabled. This feature detects and avoids loops + between the mesh and devices bridged with the soft + interface . + +What: /sys/class/net//mesh/fragmentation +Date: October 2010 +Contact: Andreas Langer +Description: + Indicates whether the data traffic going through the + mesh will be fragmented or silently discarded if the + packet size exceeds the outgoing interface MTU. + +What: /sys/class/net//mesh/gw_bandwidth +Date: October 2010 +Contact: Marek Lindner +Description: + Defines the bandwidth which is propagated by this + node if gw_mode was set to 'server'. + +What: /sys/class/net//mesh/gw_mode +Date: October 2010 +Contact: Marek Lindner +Description: + Defines the state of the gateway features. Can be + either 'off', 'client' or 'server'. + +What: /sys/class/net//mesh/gw_sel_class +Date: October 2010 +Contact: Marek Lindner +Description: + Defines the selection criteria this node will use + to choose a gateway if gw_mode was set to 'client'. + +What: /sys/class/net//mesh/hop_penalty +Date: Oct 2010 +Contact: Linus Lüssing +Description: + Defines the penalty which will be applied to an + originator message's tq-field on every hop. + +What: /sys/class/net//mesh/isolation_mark +Date: Nov 2013 +Contact: Antonio Quartulli +Description: + Defines the isolation mark (and its bitmask) which + is used to classify clients as "isolated" by the + Extended Isolation feature. + +What: /sys/class/net//mesh/multicast_mode +Date: Feb 2014 +Contact: Linus Lüssing +Description: + Indicates whether multicast optimizations are enabled + or disabled. If set to zero then all nodes in the + mesh are going to use classic flooding for any + multicast packet with no optimizations. + +What: /sys/class/net//mesh/network_coding +Date: Nov 2012 +Contact: Martin Hundeboll +Description: + Controls whether Network Coding (using some magic + to send fewer wifi packets but still the same + content) is enabled or not. + +What: /sys/class/net//mesh/orig_interval +Date: May 2010 +Contact: Marek Lindner +Description: + Defines the interval in milliseconds in which batman + sends its protocol messages. + +What: /sys/class/net//mesh/routing_algo +Date: Dec 2011 +Contact: Marek Lindner +Description: + Defines the routing procotol this mesh instance + uses to find the optimal paths through the mesh. -- cgit v1.2.3-54-g00ecf