From b4b7ff4b08e691656c9d77c758fc355833128ac0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 20 Jan 2016 14:01:31 -0300 Subject: Linux-libre 4.4-gnu --- .../devicetree/bindings/c6x/interrupt.txt | 104 --------------------- 1 file changed, 104 deletions(-) delete mode 100644 Documentation/devicetree/bindings/c6x/interrupt.txt (limited to 'Documentation/devicetree/bindings/c6x') diff --git a/Documentation/devicetree/bindings/c6x/interrupt.txt b/Documentation/devicetree/bindings/c6x/interrupt.txt deleted file mode 100644 index 42bb796cc..000000000 --- a/Documentation/devicetree/bindings/c6x/interrupt.txt +++ /dev/null @@ -1,104 +0,0 @@ -C6X Interrupt Chips -------------------- - -* C64X+ Core Interrupt Controller - - The core interrupt controller provides 16 prioritized interrupts to the - C64X+ core. Priority 0 and 1 are used for reset and NMI respectively. - Priority 2 and 3 are reserved. Priority 4-15 are used for interrupt - sources coming from outside the core. - - Required properties: - -------------------- - - compatible: Should be "ti,c64x+core-pic"; - - #interrupt-cells: <1> - - Interrupt Specifier Definition - ------------------------------ - Single cell specifying the core interrupt priority level (4-15) where - 4 is highest priority and 15 is lowest priority. - - Example - ------- - core_pic: interrupt-controller@0 { - interrupt-controller; - #interrupt-cells = <1>; - compatible = "ti,c64x+core-pic"; - }; - - - -* C64x+ Megamodule Interrupt Controller - - The megamodule PIC consists of four interrupt mupliplexers each of which - combine up to 32 interrupt inputs into a single interrupt output which - may be cascaded into the core interrupt controller. The megamodule PIC - has a total of 12 outputs cascading into the core interrupt controller. - One for each core interrupt priority level. In addition to the combined - interrupt sources, individual megamodule interrupts may be cascaded to - the core interrupt controller. When an individual interrupt is cascaded, - it is no longer handled through a megamodule interrupt combiner and is - considered to have the core interrupt controller as the parent. - - Required properties: - -------------------- - - compatible: "ti,c64x+megamod-pic" - - interrupt-controller - - #interrupt-cells: <1> - - reg: base address and size of register area - - interrupt-parent: must be core interrupt controller - - interrupts: This should have four cells; one for each interrupt combiner. - The cells contain the core priority interrupt to which the - corresponding combiner output is wired. - - Optional properties: - -------------------- - - ti,c64x+megamod-pic-mux: Array of 12 cells correspnding to the 12 core - priority interrupts. The first cell corresponds to - core priority 4 and the last cell corresponds to - core priority 15. The value of each cell is the - megamodule interrupt source which is MUXed to - the core interrupt corresponding to the cell - position. Allowed values are 4 - 127. Mapping for - interrupts 0 - 3 (combined interrupt sources) are - ignored. - - Interrupt Specifier Definition - ------------------------------ - Single cell specifying the megamodule interrupt source (4-127). Note that - interrupts mapped directly to the core with "ti,c64x+megamod-pic-mux" will - use the core interrupt controller as their parent and the specifier will - be the core priority level, not the megamodule interrupt number. - - Examples - -------- - megamod_pic: interrupt-controller@1800000 { - compatible = "ti,c64x+megamod-pic"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x1800000 0x1000>; - interrupt-parent = <&core_pic>; - interrupts = < 12 13 14 15 >; - }; - - This is a minimal example where all individual interrupts go through a - combiner. Combiner-0 is mapped to core interrupt 12, combiner-1 is mapped - to interrupt 13, etc. - - - megamod_pic: interrupt-controller@1800000 { - compatible = "ti,c64x+megamod-pic"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x1800000 0x1000>; - interrupt-parent = <&core_pic>; - interrupts = < 12 13 14 15 >; - ti,c64x+megamod-pic-mux = < 0 0 0 0 - 32 0 0 0 - 0 0 0 0 >; - }; - - This the same as the first example except that megamodule interrupt 32 is - mapped directly to core priority interrupt 8. The node using this interrupt - must set the core controller as its interrupt parent and use 8 in the - interrupt specifier value. -- cgit v1.2.3-54-g00ecf