From b4b7ff4b08e691656c9d77c758fc355833128ac0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 20 Jan 2016 14:01:31 -0300 Subject: Linux-libre 4.4-gnu --- .../devicetree/bindings/display/brcm,bcm-vc4.txt | 65 ++++++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt (limited to 'Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt') diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt new file mode 100644 index 000000000..56a961aa5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt @@ -0,0 +1,65 @@ +Broadcom VC4 (VideoCore4) GPU + +The VC4 device present on the Raspberry Pi includes a display system +with HDMI output and the HVS (Hardware Video Scaler) for compositing +display planes. + +Required properties for VC4: +- compatible: Should be "brcm,bcm2835-vc4" + +Required properties for Pixel Valve: +- compatible: Should be one of "brcm,bcm2835-pixelvalve0", + "brcm,bcm2835-pixelvalve1", or "brcm,bcm2835-pixelvalve2" +- reg: Physical base address and length of the PV's registers +- interrupts: The interrupt number + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt + +Required properties for HVS: +- compatible: Should be "brcm,bcm2835-hvs" +- reg: Physical base address and length of the HVS's registers +- interrupts: The interrupt number + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt + +Required properties for HDMI +- compatible: Should be "brcm,bcm2835-hdmi" +- reg: Physical base address and length of the two register ranges + ("HDMI" and "HD", in that order) +- interrupts: The interrupt numbers + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +- ddc: phandle of the I2C controller used for DDC EDID probing +- clocks: a) hdmi: The HDMI state machine clock + b) pixel: The pixel clock. + +Optional properties for HDMI: +- hpd-gpios: The GPIO pin for HDMI hotplug detect (if it doesn't appear + as an interrupt/status bit in the HDMI controller + itself). See bindings/pinctrl/brcm,bcm2835-gpio.txt + +Example: +pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; + interrupts = <2 10>; /* pixelvalve */ +}; + +hvs@7e400000 { + compatible = "brcm,bcm2835-hvs"; + reg = <0x7e400000 0x6000>; + interrupts = <2 1>; +}; + +hdmi: hdmi@7e902000 { + compatible = "brcm,bcm2835-hdmi"; + reg = <0x7e902000 0x600>, + <0x7e808000 0x100>; + interrupts = <2 8>, <2 9>; + ddc = <&i2c2>; + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + clocks = <&clocks BCM2835_PLLH_PIX>, + <&clocks BCM2835_CLOCK_HSM>; + clock-names = "pixel", "hdmi"; +}; + +vc4: gpu { + compatible = "brcm,bcm2835-vc4"; +}; -- cgit v1.2.3-54-g00ecf