From 670027c507e99521d416994a18a498def9ef2ea3 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?=
 <emulatorman@parabola.nu>
Date: Sat, 22 Oct 2016 19:31:08 -0300
Subject: Linux-libre 4.8.3-gnu

---
 .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 107 ---------------------
 1 file changed, 107 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt

(limited to 'Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt')

diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
deleted file mode 100644
index a1f2683c4..000000000
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-Xilinx AXI VDMA engine, it does transfers between memory and video devices.
-It can be configured to have one channel or two channels. If configured
-as two channels, one is to transmit to the video device and another is
-to receive from the video device.
-
-Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream
-target devices. It can be configured to have one channel or two channels.
-If configured as two channels, one is to transmit to the device and another
-is to receive from the device.
-
-Xilinx AXI CDMA engine, it does transfers between memory-mapped source
-address and a memory-mapped destination address.
-
-Required properties:
-- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" or
-	      "xlnx,axi-cdma-1.00.a""
-- #dma-cells: Should be <1>, see "dmas" property below
-- reg: Should contain VDMA registers location and length.
-- xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits).
-- dma-ranges: Should be as the following <dma_addr cpu_addr max_len>.
-- dma-channel child node: Should have at least one channel and can have up to
-	two channels per device. This node specifies the properties of each
-	DMA channel (see child node properties below).
-- clocks: Input clock specifier. Refer to common clock bindings.
-- clock-names: List of input clocks
-	For VDMA:
-	Required elements: "s_axi_lite_aclk"
-	Optional elements: "m_axi_mm2s_aclk" "m_axi_s2mm_aclk",
-			   "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"
-	For CDMA:
-	Required elements: "s_axi_lite_aclk", "m_axi_aclk"
-	FOR AXIDMA:
-	Required elements: "s_axi_lite_aclk"
-	Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
-			   "m_axi_sg_aclk"
-
-Required properties for VDMA:
-- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
-
-Optional properties:
-- xlnx,include-sg: Tells configured for Scatter-mode in
-	the hardware.
-Optional properties for VDMA:
-- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
-	It takes following values:
-	{1}, flush both channels
-	{2}, flush mm2s channel
-	{3}, flush s2mm channel
-
-Required child node properties:
-- compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or
-	"xlnx,axi-vdma-s2mm-channel".
-- interrupts: Should contain per channel VDMA interrupts.
-- xlnx,datawidth: Should contain the stream data width, take values
-	{32,64...1024}.
-
-Optional child node properties:
-- xlnx,include-dre: Tells hardware is configured for Data
-	Realignment Engine.
-Optional child node properties for VDMA:
-- xlnx,genlock-mode: Tells Genlock synchronization is
-	enabled/disabled in hardware.
-
-Example:
-++++++++
-
-axi_vdma_0: axivdma@40030000 {
-	compatible = "xlnx,axi-vdma-1.00.a";
-	#dma_cells = <1>;
-	reg = < 0x40030000 0x10000 >;
-	dma-ranges = <0x00000000 0x00000000 0x40000000>;
-	xlnx,num-fstores = <0x8>;
-	xlnx,flush-fsync = <0x1>;
-	xlnx,addrwidth = <0x20>;
-	clocks = <&clk 0>, <&clk 1>, <&clk 2>, <&clk 3>, <&clk 4>;
-	clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
-		      "m_axis_mm2s_aclk", "s_axis_s2mm_aclk";
-	dma-channel@40030000 {
-		compatible = "xlnx,axi-vdma-mm2s-channel";
-		interrupts = < 0 54 4 >;
-		xlnx,datawidth = <0x40>;
-	} ;
-	dma-channel@40030030 {
-		compatible = "xlnx,axi-vdma-s2mm-channel";
-		interrupts = < 0 53 4 >;
-		xlnx,datawidth = <0x40>;
-	} ;
-} ;
-
-
-* DMA client
-
-Required properties:
-- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
-	where Channel ID is '0' for write/tx and '1' for read/rx
-	channel.
-- dma-names: a list of DMA channel names, one per "dmas" entry
-
-Example:
-++++++++
-
-vdmatest_0: vdmatest@0 {
-	compatible ="xlnx,axi-vdma-test-1.00.a";
-	dmas = <&axi_vdma_0 0
-		&axi_vdma_0 1>;
-	dma-names = "vdma0", "vdma1";
-} ;
-- 
cgit v1.2.3