From e5fd91f1ef340da553f7a79da9540c3db711c937 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Tue, 8 Sep 2015 01:01:14 -0300 Subject: Linux-libre 4.2-gnu --- .../devicetree/bindings/net/amd-xgbe-phy.txt | 48 ---------------------- 1 file changed, 48 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/amd-xgbe-phy.txt (limited to 'Documentation/devicetree/bindings/net/amd-xgbe-phy.txt') diff --git a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt deleted file mode 100644 index 8db32384a..000000000 --- a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt +++ /dev/null @@ -1,48 +0,0 @@ -* AMD 10GbE PHY driver (amd-xgbe-phy) - -Required properties: -- compatible: Should be "amd,xgbe-phy-seattle-v1a" and - "ethernet-phy-ieee802.3-c45" -- reg: Address and length of the register sets for the device - - SerDes Rx/Tx registers - - SerDes integration registers (1/2) - - SerDes integration registers (2/2) -- interrupt-parent: Should be the phandle for the interrupt controller - that services interrupts for this device -- interrupts: Should contain the amd-xgbe-phy interrupt. - -Optional properties: -- amd,speed-set: Speed capabilities of the device - 0 - 1GbE and 10GbE (default) - 1 - 2.5GbE and 10GbE - -The following optional properties are represented by an array with each -value corresponding to a particular speed. The first array value represents -the setting for the 1GbE speed, the second value for the 2.5GbE speed and -the third value for the 10GbE speed. All three values are required if the -property is used. -- amd,serdes-blwc: Baseline wandering correction enablement - 0 - Off - 1 - On -- amd,serdes-cdr-rate: CDR rate speed selection -- amd,serdes-pq-skew: PQ (data sampling) skew -- amd,serdes-tx-amp: TX amplitude boost -- amd,serdes-dfe-tap-config: DFE taps available to run -- amd,serdes-dfe-tap-enable: DFE taps to enable - -Example: - xgbe_phy@e1240800 { - compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45"; - reg = <0 0xe1240800 0 0x00400>, - <0 0xe1250000 0 0x00060>, - <0 0xe1250080 0 0x00004>; - interrupt-parent = <&gic>; - interrupts = <0 323 4>; - amd,speed-set = <0>; - amd,serdes-blwc = <1>, <1>, <0>; - amd,serdes-cdr-rate = <2>, <2>, <7>; - amd,serdes-pq-skew = <10>, <10>, <30>; - amd,serdes-tx-amp = <15>, <15>, <10>; - amd,serdes-dfe-tap-config = <3>, <3>, <1>; - amd,serdes-dfe-tap-enable = <0>, <0>, <127>; - }; -- cgit v1.2.3-54-g00ecf