From 863981e96738983919de841ec669e157e6bdaeb0 Mon Sep 17 00:00:00 2001
From: André Fabian Silva Delgado <emulatorman@parabola.nu>
Date: Sun, 11 Sep 2016 04:34:46 -0300
Subject: Linux-libre 4.7.1-gnu

---
 .../bindings/phy/brcm,brcmstb-sata-phy.txt         | 41 ----------------------
 1 file changed, 41 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt

(limited to 'Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt')

diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
deleted file mode 100644
index d87ab7c12..000000000
--- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Broadcom SATA3 PHY for STB
-
-Required properties:
-- compatible: should be one or more of
-     "brcm,bcm7425-sata-phy"
-     "brcm,bcm7445-sata-phy"
-     "brcm,phy-sata3"
-- address-cells: should be 1
-- size-cells: should be 0
-- reg: register range for the PHY PCB interface
-- reg-names: should be "phy"
-
-Sub-nodes:
-  Each port's PHY should be represented as a sub-node.
-
-Sub-nodes required properties:
-- reg: the PHY number
-- phy-cells: generic PHY binding; must be 0
-Optional:
-- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
-
-
-Example:
-
-	sata-phy@f0458100 {
-		compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
-		reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;
-		reg-names = "phy";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sata-phy@0 {
-			reg = <0>;
-			#phy-cells = <0>;
-		};
-
-		sata-phy@1 {
-			reg = <1>;
-			#phy-cells = <0>;
-		};
-	};
-- 
cgit v1.2.3-54-g00ecf