From 03dd4cb26d967f9588437b0fc9cc0e8353322bb7 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Fri, 25 Mar 2016 03:53:42 -0300 Subject: Linux-libre 4.5-gnu --- Documentation/devicetree/bindings/usb/usb3503.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/usb/usb3503.txt') diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt index 52493b148..c1a0a9191 100644 --- a/Documentation/devicetree/bindings/usb/usb3503.txt +++ b/Documentation/devicetree/bindings/usb/usb3503.txt @@ -18,7 +18,8 @@ Optional properties: - refclk: Clock used for driving REFCLK signal (optional, if not provided the driver assumes that clock signal is always available, its rate is specified by REF_SEL pins and a value from the primary - reference clock frequencies table is used) + reference clock frequencies table is used). Use clocks and + clock-names in order to assign it - refclk-frequency: Frequency of the REFCLK signal as defined by REF_SEL pins (optional, if not provided, driver will not set rate of the REFCLK signal and assume that a value from the primary reference @@ -33,4 +34,6 @@ Examples: intn-gpios = <&gpx3 4 1>; reset-gpios = <&gpx3 5 1>; initial-mode = <1>; + clocks = <&clks 80>; + clock-names = "refclk"; }; -- cgit v1.2.3-54-g00ecf