From d0b2f91bede3bd5e3d24dd6803e56eee959c1797 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Thu, 20 Oct 2016 00:10:27 -0300 Subject: Linux-libre 4.8.2-gnu --- Documentation/media/uapi/v4l/standard.rst | 183 ++++++++++++++++++++++++++++++ 1 file changed, 183 insertions(+) create mode 100644 Documentation/media/uapi/v4l/standard.rst (limited to 'Documentation/media/uapi/v4l/standard.rst') diff --git a/Documentation/media/uapi/v4l/standard.rst b/Documentation/media/uapi/v4l/standard.rst new file mode 100644 index 000000000..c4f678f54 --- /dev/null +++ b/Documentation/media/uapi/v4l/standard.rst @@ -0,0 +1,183 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _standard: + +*************** +Video Standards +*************** + +Video devices typically support one or more different video standards or +variations of standards. Each video input and output may support another +set of standards. This set is reported by the ``std`` field of struct +:ref:`v4l2_input ` and struct +:ref:`v4l2_output ` returned by the +:ref:`VIDIOC_ENUMINPUT` and +:ref:`VIDIOC_ENUMOUTPUT` ioctls, respectively. + +V4L2 defines one bit for each analog video standard currently in use +worldwide, and sets aside bits for driver defined standards, e. g. +hybrid standards to watch NTSC video tapes on PAL TVs and vice versa. +Applications can use the predefined bits to select a particular +standard, although presenting the user a menu of supported standards is +preferred. To enumerate and query the attributes of the supported +standards applications use the :ref:`VIDIOC_ENUMSTD` +ioctl. + +Many of the defined standards are actually just variations of a few +major standards. The hardware may in fact not distinguish between them, +or do so internal and switch automatically. Therefore enumerated +standards also contain sets of one or more standard bits. + +Assume a hypothetic tuner capable of demodulating B/PAL, G/PAL and I/PAL +signals. The first enumerated standard is a set of B and G/PAL, switched +automatically depending on the selected radio frequency in UHF or VHF +band. Enumeration gives a "PAL-B/G" or "PAL-I" choice. Similar a +Composite input may collapse standards, enumerating "PAL-B/G/H/I", +"NTSC-M" and "SECAM-D/K". [#f1]_ + +To query and select the standard used by the current video input or +output applications call the :ref:`VIDIOC_G_STD ` and +:ref:`VIDIOC_S_STD ` ioctl, respectively. The +*received* standard can be sensed with the +:ref:`VIDIOC_QUERYSTD` ioctl. + +..note:: The parameter of all these ioctls is a pointer to a + :ref:`v4l2_std_id ` type (a standard set), *not* an + index into the standard enumeration. Drivers must implement all video + standard ioctls when the device has one or more video inputs or outputs. + +Special rules apply to devices such as USB cameras where the notion of +video standards makes little sense. More generally for any capture or +output device which is: + +- incapable of capturing fields or frames at the nominal rate of the + video standard, or + +- that does not support the video standard formats at all. + +Here the driver shall set the ``std`` field of struct +:ref:`v4l2_input ` and struct +:ref:`v4l2_output ` to zero and the :ref:`VIDIOC_G_STD `, +:ref:`VIDIOC_S_STD `, :ref:`VIDIOC_QUERYSTD` and :ref:`VIDIOC_ENUMSTD` ioctls +shall return the ``ENOTTY`` error code or the ``EINVAL`` error code. + +Applications can make use of the :ref:`input-capabilities` and +:ref:`output-capabilities` flags to determine whether the video +standard ioctls can be used with the given input or output. + +Example: Information about the current video standard +===================================================== + +.. code-block:: c + + v4l2_std_id std_id; + struct v4l2_standard standard; + + if (-1 == ioctl(fd, VIDIOC_G_STD, &std_id)) { + /* Note when VIDIOC_ENUMSTD always returns ENOTTY this + is no video device or it falls under the USB exception, + and VIDIOC_G_STD returning ENOTTY is no error. */ + + perror("VIDIOC_G_STD"); + exit(EXIT_FAILURE); + } + + memset(&standard, 0, sizeof(standard)); + standard.index = 0; + + while (0 == ioctl(fd, VIDIOC_ENUMSTD, &standard)) { + if (standard.id & std_id) { + printf("Current video standard: %s\\n", standard.name); + exit(EXIT_SUCCESS); + } + + standard.index++; + } + + /* EINVAL indicates the end of the enumeration, which cannot be + empty unless this device falls under the USB exception. */ + + if (errno == EINVAL || standard.index == 0) { + perror("VIDIOC_ENUMSTD"); + exit(EXIT_FAILURE); + } + +Example: Listing the video standards supported by the current input +=================================================================== + +.. code-block:: c + + struct v4l2_input input; + struct v4l2_standard standard; + + memset(&input, 0, sizeof(input)); + + if (-1 == ioctl(fd, VIDIOC_G_INPUT, &input.index)) { + perror("VIDIOC_G_INPUT"); + exit(EXIT_FAILURE); + } + + if (-1 == ioctl(fd, VIDIOC_ENUMINPUT, &input)) { + perror("VIDIOC_ENUM_INPUT"); + exit(EXIT_FAILURE); + } + + printf("Current input %s supports:\\n", input.name); + + memset(&standard, 0, sizeof(standard)); + standard.index = 0; + + while (0 == ioctl(fd, VIDIOC_ENUMSTD, &standard)) { + if (standard.id & input.std) + printf("%s\\n", standard.name); + + standard.index++; + } + + /* EINVAL indicates the end of the enumeration, which cannot be + empty unless this device falls under the USB exception. */ + + if (errno != EINVAL || standard.index == 0) { + perror("VIDIOC_ENUMSTD"); + exit(EXIT_FAILURE); + } + +Example: Selecting a new video standard +======================================= + +.. code-block:: c + + struct v4l2_input input; + v4l2_std_id std_id; + + memset(&input, 0, sizeof(input)); + + if (-1 == ioctl(fd, VIDIOC_G_INPUT, &input.index)) { + perror("VIDIOC_G_INPUT"); + exit(EXIT_FAILURE); + } + + if (-1 == ioctl(fd, VIDIOC_ENUMINPUT, &input)) { + perror("VIDIOC_ENUM_INPUT"); + exit(EXIT_FAILURE); + } + + if (0 == (input.std & V4L2_STD_PAL_BG)) { + fprintf(stderr, "Oops. B/G PAL is not supported.\\n"); + exit(EXIT_FAILURE); + } + + /* Note this is also supposed to work when only B + or G/PAL is supported. */ + + std_id = V4L2_STD_PAL_BG; + + if (-1 == ioctl(fd, VIDIOC_S_STD, &std_id)) { + perror("VIDIOC_S_STD"); + exit(EXIT_FAILURE); + } + +.. [#f1] + Some users are already confused by technical terms PAL, NTSC and + SECAM. There is no point asking them to distinguish between B, G, D, + or K when the software or hardware can do that automatically. -- cgit v1.2.3-54-g00ecf