From 376027f2a3888ef3dec73ee41f85d90e51162d78 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?= Date: Tue, 8 Sep 2015 11:24:16 -0300 Subject: Add TuxOnIce support --- Documentation/power/tuxonice-internals.txt | 532 +++++++++++++++++++++++++++++ 1 file changed, 532 insertions(+) create mode 100644 Documentation/power/tuxonice-internals.txt (limited to 'Documentation/power/tuxonice-internals.txt') diff --git a/Documentation/power/tuxonice-internals.txt b/Documentation/power/tuxonice-internals.txt new file mode 100644 index 000000000..0c6a2163a --- /dev/null +++ b/Documentation/power/tuxonice-internals.txt @@ -0,0 +1,532 @@ + TuxOnIce 4.0 Internal Documentation. + Updated to 23 March 2015 + +(Please note that incremental image support mentioned in this document is work +in progress. This document may need updating prior to the actual release of +4.0!) + +1. Introduction. + + TuxOnIce 4.0 is an addition to the Linux Kernel, designed to + allow the user to quickly shutdown and quickly boot a computer, without + needing to close documents or programs. It is equivalent to the + hibernate facility in some laptops. This implementation, however, + requires no special BIOS or hardware support. + + The code in these files is based upon the original implementation + prepared by Gabor Kuti and additional work by Pavel Machek and a + host of others. This code has been substantially reworked by Nigel + Cunningham, again with the help and testing of many others, not the + least of whom are Bernard Blackham and Michael Frank. At its heart, + however, the operation is essentially the same as Gabor's version. + +2. Overview of operation. + + The basic sequence of operations is as follows: + + a. Quiesce all other activity. + b. Ensure enough memory and storage space are available, and attempt + to free memory/storage if necessary. + c. Allocate the required memory and storage space. + d. Write the image. + e. Power down. + + There are a number of complicating factors which mean that things are + not as simple as the above would imply, however... + + o The activity of each process must be stopped at a point where it will + not be holding locks necessary for saving the image, or unexpectedly + restart operations due to something like a timeout and thereby make + our image inconsistent. + + o It is desirous that we sync outstanding I/O to disk before calculating + image statistics. This reduces corruption if one should suspend but + then not resume, and also makes later parts of the operation safer (see + below). + + o We need to get as close as we can to an atomic copy of the data. + Inconsistencies in the image will result in inconsistent memory contents at + resume time, and thus in instability of the system and/or file system + corruption. This would appear to imply a maximum image size of one half of + the amount of RAM, but we have a solution... (again, below). + + o In 2.6 and later, we choose to play nicely with the other suspend-to-disk + implementations. + +3. Detailed description of internals. + + a. Quiescing activity. + + Safely quiescing the system is achieved using three separate but related + aspects. + + First, we use the vanilla kerne's support for freezing processes. This code + is based on the observation that the vast majority of processes don't need + to run during suspend. They can be 'frozen'. The kernel therefore + implements a refrigerator routine, which processes enter and in which they + remain until the cycle is complete. Processes enter the refrigerator via + try_to_freeze() invocations at appropriate places. A process cannot be + frozen in any old place. It must not be holding locks that will be needed + for writing the image or freezing other processes. For this reason, + userspace processes generally enter the refrigerator via the signal + handling code, and kernel threads at the place in their event loops where + they drop locks and yield to other processes or sleep. The task of freezing + processes is complicated by the fact that there can be interdependencies + between processes. Freezing process A before process B may mean that + process B cannot be frozen, because it stops at waiting for process A + rather than in the refrigerator. This issue is seen where userspace waits + on freezeable kernel threads or fuse filesystem threads. To address this + issue, we implement the following algorithm for quiescing activity: + + - Freeze filesystems (including fuse - userspace programs starting + new requests are immediately frozen; programs already running + requests complete their work before being frozen in the next + step) + - Freeze userspace + - Thaw filesystems (this is safe now that userspace is frozen and no + fuse requests are outstanding). + - Invoke sys_sync (noop on fuse). + - Freeze filesystems + - Freeze kernel threads + + If we need to free memory, we thaw kernel threads and filesystems, but not + userspace. We can then free caches without worrying about deadlocks due to + swap files being on frozen filesystems or such like. + + b. Ensure enough memory & storage are available. + + We have a number of constraints to meet in order to be able to successfully + suspend and resume. + + First, the image will be written in two parts, described below. One of + these parts needs to have an atomic copy made, which of course implies a + maximum size of one half of the amount of system memory. The other part + ('pageset') is not atomically copied, and can therefore be as large or + small as desired. + + Second, we have constraints on the amount of storage available. In these + calculations, we may also consider any compression that will be done. The + cryptoapi module allows the user to configure an expected compression ratio. + + Third, the user can specify an arbitrary limit on the image size, in + megabytes. This limit is treated as a soft limit, so that we don't fail the + attempt to suspend if we cannot meet this constraint. + + c. Allocate the required memory and storage space. + + Having done the initial freeze, we determine whether the above constraints + are met, and seek to allocate the metadata for the image. If the constraints + are not met, or we fail to allocate the required space for the metadata, we + seek to free the amount of memory that we calculate is needed and try again. + We allow up to four iterations of this loop before aborting the cycle. If + we do fail, it should only be because of a bug in TuxOnIce's calculations + or the vanilla kernel code for freeing memory. + + These steps are merged together in the prepare_image function, found in + prepare_image.c. The functions are merged because of the cyclical nature + of the problem of calculating how much memory and storage is needed. Since + the data structures containing the information about the image must + themselves take memory and use storage, the amount of memory and storage + required changes as we prepare the image. Since the changes are not large, + only one or two iterations will be required to achieve a solution. + + The recursive nature of the algorithm is miminised by keeping user space + frozen while preparing the image, and by the fact that our records of which + pages are to be saved and which pageset they are saved in use bitmaps (so + that changes in number or fragmentation of the pages to be saved don't + feedback via changes in the amount of memory needed for metadata). The + recursiveness is thus limited to any extra slab pages allocated to store the + extents that record storage used, and the effects of seeking to free memory. + + d. Write the image. + + We previously mentioned the need to create an atomic copy of the data, and + the half-of-memory limitation that is implied in this. This limitation is + circumvented by dividing the memory to be saved into two parts, called + pagesets. + + Pageset2 contains most of the page cache - the pages on the active and + inactive LRU lists that aren't needed or modified while TuxOnIce is + running, so they can be safely written without an atomic copy. They are + therefore saved first and reloaded last. While saving these pages, + TuxOnIce carefully ensures that the work of writing the pages doesn't make + the image inconsistent. With the support for Kernel (Video) Mode Setting + going into the kernel at the time of writing, we need to check for pages + on the LRU that are used by KMS, and exclude them from pageset2. They are + atomically copied as part of pageset 1. + + Once pageset2 has been saved, we prepare to do the atomic copy of remaining + memory. As part of the preparation, we power down drivers, thereby providing + them with the opportunity to have their state recorded in the image. The + amount of memory allocated by drivers for this is usually negligible, but if + DRI is in use, video drivers may require significants amounts. Ideally we + would be able to query drivers while preparing the image as to the amount of + memory they will need. Unfortunately no such mechanism exists at the time of + writing. For this reason, TuxOnIce allows the user to set an + 'extra_pages_allowance', which is used to seek to ensure sufficient memory + is available for drivers at this point. TuxOnIce also lets the user set this + value to 0. In this case, a test driver suspend is done while preparing the + image, and the difference (plus a margin) used instead. TuxOnIce will also + automatically restart the hibernation process (twice at most) if it finds + that the extra pages allowance is not sufficient. It will then use what was + actually needed (plus a margin, again). Failure to hibernate should thus + be an extremely rare occurence. + + Having suspended the drivers, we save the CPU context before making an + atomic copy of pageset1, resuming the drivers and saving the atomic copy. + After saving the two pagesets, we just need to save our metadata before + powering down. + + As we mentioned earlier, the contents of pageset2 pages aren't needed once + they've been saved. We therefore use them as the destination of our atomic + copy. In the unlikely event that pageset1 is larger, extra pages are + allocated while the image is being prepared. This is normally only a real + possibility when the system has just been booted and the page cache is + small. + + This is where we need to be careful about syncing, however. Pageset2 will + probably contain filesystem meta data. If this is overwritten with pageset1 + and then a sync occurs, the filesystem will be corrupted - at least until + resume time and another sync of the restored data. Since there is a + possibility that the user might not resume or (may it never be!) that + TuxOnIce might oops, we do our utmost to avoid syncing filesystems after + copying pageset1. + + e. Incremental images + + TuxOnIce 4.0 introduces a new incremental image mode which changes things a + little. When incremental images are enabled, we save a 'normal' image the + first time we hibernate. One resume however, we do not free the image or + the associated storage. Instead, it is retained until the next attempt at + hibernating and a mechanism is enabled which is used to track which pages + of memory are modified between the two cycles. The modified pages can then + be added to the existing image, rather than unmodified pages being saved + again unnecessarily. + + Incremental image support is available in 64 bit Linux only, due to the + requirement for extra page flags. + + This support is accomplished in the following way: + + 1) Tracking of pages. + + The tracking of changed pages is accomplished using the page fault + mechanism. When we reach a point at which we want to start tracking + changes, most pages are marked read-only and also flagged as being + read-only because of this support. Since this cannot happen for every page + of RAM, some are marked as untracked and always treated as modified whn + preparing an incremental iamge. When a process attempts to modify a page + that is marked read-only in this way, a page fault occurs, with TuxOnIce + code marking the page writable and dirty before allowing the write to + continue. In this way, the effect of incremental images on performance is + minimised - a page only causes a fault once. Small modifications to the + page allocator further reduce the number of faults that occur - free pages + are not tracked; they are made writable and marked as dirty as part of + being allocated. + + 2) Saving the incremental image / atomicity. + + The page fault mechanism is also used to improve the means by which + atomicity of the image is acheived. When it is time to do an atomic copy, + the flags for pages are reset, with the result being that it is no longer + necessary for us to do an atomic of pageset1. Instead, we normally write + the uncopied pages to disk. When an attempt is made to modify a page that + has not yet been saved, the page-fault mechanism makes a copy of the page + prior to allowing the write. This copy is then written to disk. Likewise, + on resume, if a process attempts to write to a page that has been read + while the rest of the image is still being loaded, a copy of that page is + made prior to the write being allowed. At the end of loading the image, + modified pages can thus be restored to their 'atomic copy' contents prior + to restarting normal operation. We also mark pages that are yet to be read + as invalid PFNs, so that we can capture as a bug any attempt by a + half-restored kernel to access a page that hasn't yet been reloaded. + + f. Power down. + + Powering down uses standard kernel routines. TuxOnIce supports powering down + using the ACPI S3, S4 and S5 methods or the kernel's non-ACPI power-off. + Supporting suspend to ram (S3) as a power off option might sound strange, + but it allows the user to quickly get their system up and running again if + the battery doesn't run out (we just need to re-read the overwritten pages) + and if the battery does run out (or the user removes power), they can still + resume. + +4. Data Structures. + + TuxOnIce uses three main structures to store its metadata and configuration + information: + + a) Pageflags bitmaps. + + TuxOnIce records which pages will be in pageset1, pageset2, the destination + of the atomic copy and the source of the atomically restored image using + bitmaps. The code used is that written for swsusp, with small improvements + to match TuxOnIce's requirements. + + The pageset1 bitmap is thus easily stored in the image header for use at + resume time. + + As mentioned above, using bitmaps also means that the amount of memory and + storage required for recording the above information is constant. This + greatly simplifies the work of preparing the image. In earlier versions of + TuxOnIce, extents were used to record which pages would be stored. In that + case, however, eating memory could result in greater fragmentation of the + lists of pages, which in turn required more memory to store the extents and + more storage in the image header. These could in turn require further + freeing of memory, and another iteration. All of this complexity is removed + by having bitmaps. + + Bitmaps also make a lot of sense because TuxOnIce only ever iterates + through the lists. There is therefore no cost to not being able to find the + nth page in order 0 time. We only need to worry about the cost of finding + the n+1th page, given the location of the nth page. Bitwise optimisations + help here. + + b) Extents for block data. + + TuxOnIce supports writing the image to multiple block devices. In the case + of swap, multiple partitions and/or files may be in use, and we happily use + them all (with the exception of compcache pages, which we allocate but do + not use). This use of multiple block devices is accomplished as follows: + + Whatever the actual source of the allocated storage, the destination of the + image can be viewed in terms of one or more block devices, and on each + device, a list of sectors. To simplify matters, we only use contiguous, + PAGE_SIZE aligned sectors, like the swap code does. + + Since sector numbers on each bdev may well not start at 0, it makes much + more sense to use extents here. Contiguous ranges of pages can thus be + represented in the extents by contiguous values. + + Variations in block size are taken account of in transforming this data + into the parameters for bio submission. + + We can thus implement a layer of abstraction wherein the core of TuxOnIce + doesn't have to worry about which device we're currently writing to or + where in the device we are. It simply requests that the next page in the + pageset or header be written, leaving the details to this lower layer. + The lower layer remembers where in the sequence of devices and blocks each + pageset starts. The header always starts at the beginning of the allocated + storage. + + So extents are: + + struct extent { + unsigned long minimum, maximum; + struct extent *next; + } + + These are combined into chains of extents for a device: + + struct extent_chain { + int size; /* size of the extent ie sum (max-min+1) */ + int allocs, frees; + char *name; + struct extent *first, *last_touched; + }; + + For each bdev, we need to store a little more info (simplified definition): + + struct toi_bdev_info { + struct block_device *bdev; + + char uuid[17]; + dev_t dev_t; + int bmap_shift; + int blocks_per_page; + }; + + The uuid is the main means used to identify the device in the storage + image. This means we can cope with the dev_t representation of a device + changing between saving the image and restoring it, as may happen on some + bioses or in the LVM case. + + bmap_shift and blocks_per_page apply the effects of variations in blocks + per page settings for the filesystem and underlying bdev. For most + filesystems, these are the same, but for xfs, they can have independant + values. + + Combining these two structures together, we have everything we need to + record what devices and what blocks on each device are being used to + store the image, and to submit i/o using bio_submit. + + The last elements in the picture are a means of recording how the storage + is being used. + + We do this first and foremost by implementing a layer of abstraction on + top of the devices and extent chains which allows us to view however many + devices there might be as one long storage tape, with a single 'head' that + tracks a 'current position' on the tape: + + struct extent_iterate_state { + struct extent_chain *chains; + int num_chains; + int current_chain; + struct extent *current_extent; + unsigned long current_offset; + }; + + That is, *chains points to an array of size num_chains of extent chains. + For the filewriter, this is always a single chain. For the swapwriter, the + array is of size MAX_SWAPFILES. + + current_chain, current_extent and current_offset thus point to the current + index in the chains array (and into a matching array of struct + suspend_bdev_info), the current extent in that chain (to optimise access), + and the current value in the offset. + + The image is divided into three parts: + - The header + - Pageset 1 + - Pageset 2 + + The header always starts at the first device and first block. We know its + size before we begin to save the image because we carefully account for + everything that will be stored in it. + + The second pageset (LRU) is stored first. It begins on the next page after + the end of the header. + + The first pageset is stored second. It's start location is only known once + pageset2 has been saved, since pageset2 may be compressed as it is written. + This location is thus recorded at the end of saving pageset2. It is page + aligned also. + + Since this information is needed at resume time, and the location of extents + in memory will differ at resume time, this needs to be stored in a portable + way: + + struct extent_iterate_saved_state { + int chain_num; + int extent_num; + unsigned long offset; + }; + + We can thus implement a layer of abstraction wherein the core of TuxOnIce + doesn't have to worry about which device we're currently writing to or + where in the device we are. It simply requests that the next page in the + pageset or header be written, leaving the details to this layer, and + invokes the routines to remember and restore the position, without having + to worry about the details of how the data is arranged on disk or such like. + + c) Modules + + One aim in designing TuxOnIce was to make it flexible. We wanted to allow + for the implementation of different methods of transforming a page to be + written to disk and different methods of getting the pages stored. + + In early versions (the betas and perhaps Suspend1), compression support was + inlined in the image writing code, and the data structures and code for + managing swap were intertwined with the rest of the code. A number of people + had expressed interest in implementing image encryption, and alternative + methods of storing the image. + + In order to achieve this, TuxOnIce was given a modular design. + + A module is a single file which encapsulates the functionality needed + to transform a pageset of data (encryption or compression, for example), + or to write the pageset to a device. The former type of module is called + a 'page-transformer', the later a 'writer'. + + Modules are linked together in pipeline fashion. There may be zero or more + page transformers in a pipeline, and there is always exactly one writer. + The pipeline follows this pattern: + + --------------------------------- + | TuxOnIce Core | + --------------------------------- + | + | + --------------------------------- + | Page transformer 1 | + --------------------------------- + | + | + --------------------------------- + | Page transformer 2 | + --------------------------------- + | + | + --------------------------------- + | Writer | + --------------------------------- + + During the writing of an image, the core code feeds pages one at a time + to the first module. This module performs whatever transformations it + implements on the incoming data, completely consuming the incoming data and + feeding output in a similar manner to the next module. + + All routines are SMP safe, and the final result of the transformations is + written with an index (provided by the core) and size of the output by the + writer. As a result, we can have multithreaded I/O without needing to + worry about the sequence in which pages are written (or read). + + During reading, the pipeline works in the reverse direction. The core code + calls the first module with the address of a buffer which should be filled. + (Note that the buffer size is always PAGE_SIZE at this time). This module + will in turn request data from the next module and so on down until the + writer is made to read from the stored image. + + Part of definition of the structure of a module thus looks like this: + + int (*rw_init) (int rw, int stream_number); + int (*rw_cleanup) (int rw); + int (*write_chunk) (struct page *buffer_page); + int (*read_chunk) (struct page *buffer_page, int sync); + + It should be noted that the _cleanup routine may be called before the + full stream of data has been read or written. While writing the image, + the user may (depending upon settings) choose to abort suspending, and + if we are in the midst of writing the last portion of the image, a portion + of the second pageset may be reread. This may also happen if an error + occurs and we seek to abort the process of writing the image. + + The modular design is also useful in a number of other ways. It provides + a means where by we can add support for: + + - providing overall initialisation and cleanup routines; + - serialising configuration information in the image header; + - providing debugging information to the user; + - determining memory and image storage requirements; + - dis/enabling components at run-time; + - configuring the module (see below); + + ...and routines for writers specific to their work: + - Parsing a resume= location; + - Determining whether an image exists; + - Marking a resume as having been attempted; + - Invalidating an image; + + Since some parts of the core - the user interface and storage manager + support - have use for some of these functions, they are registered as + 'miscellaneous' modules as well. + + d) Sysfs data structures. + + This brings us naturally to support for configuring TuxOnIce. We desired to + provide a way to make TuxOnIce as flexible and configurable as possible. + The user shouldn't have to reboot just because they want to now hibernate to + a file instead of a partition, for example. + + To accomplish this, TuxOnIce implements a very generic means whereby the + core and modules can register new sysfs entries. All TuxOnIce entries use + a single _store and _show routine, both of which are found in + tuxonice_sysfs.c in the kernel/power directory. These routines handle the + most common operations - getting and setting the values of bits, integers, + longs, unsigned longs and strings in one place, and allow overrides for + customised get and set options as well as side-effect routines for all + reads and writes. + + When combined with some simple macros, a new sysfs entry can then be defined + in just a couple of lines: + + SYSFS_INT("progress_granularity", SYSFS_RW, &progress_granularity, 1, + 2048, 0, NULL), + + This defines a sysfs entry named "progress_granularity" which is rw and + allows the user to access an integer stored at &progress_granularity, giving + it a value between 1 and 2048 inclusive. + + Sysfs entries are registered under /sys/power/tuxonice, and entries for + modules are located in a subdirectory named after the module. + -- cgit v1.2.3