From 8d91c1e411f55d7ea91b1183a2e9f8088fb4d5be Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?= Date: Tue, 15 Dec 2015 14:52:16 -0300 Subject: Linux-libre 4.3.2-gnu --- Documentation/usb/power-management.txt | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'Documentation/usb') diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index b5f839117..4a15c90bc 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -521,10 +521,10 @@ enabling hardware LPM, the host can automatically put the device into lower power state(L1 for usb2.0 devices, or U1/U2 for usb3.0 devices), which state device can enter and resume very quickly. -The user interface for controlling USB2 hardware LPM is located in the +The user interface for controlling hardware LPM is located in the power/ subdirectory of each USB device's sysfs directory, that is, in /sys/bus/usb/devices/.../power/ where "..." is the device's ID. The -relevant attribute files is usb2_hardware_lpm. +relevant attribute files are usb2_hardware_lpm and usb3_hardware_lpm. power/usb2_hardware_lpm @@ -537,6 +537,17 @@ relevant attribute files is usb2_hardware_lpm. can write y/Y/1 or n/N/0 to the file to enable/disable USB2 hardware LPM manually. This is for test purpose mainly. + power/usb3_hardware_lpm + + When a USB 3.0 lpm-capable device is plugged in to a + xHCI host which supports link PM, it will check if U1 + and U2 exit latencies have been set in the BOS + descriptor; if the check is is passed and the host + supports USB3 hardware LPM, USB3 hardware LPM will be + enabled for the device and this file will be created. + The file holds a string value (enable or disable) + indicating whether or not USB3 hardware LPM is + enabled for the device. USB Port Power Control ---------------------- -- cgit v1.2.3