From 670027c507e99521d416994a18a498def9ef2ea3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?= Date: Sat, 22 Oct 2016 19:31:08 -0300 Subject: Linux-libre 4.8.3-gnu --- .../video4linux/cx2341x/fw-decoder-regs.txt | 817 --------------------- 1 file changed, 817 deletions(-) delete mode 100644 Documentation/video4linux/cx2341x/fw-decoder-regs.txt (limited to 'Documentation/video4linux/cx2341x/fw-decoder-regs.txt') diff --git a/Documentation/video4linux/cx2341x/fw-decoder-regs.txt b/Documentation/video4linux/cx2341x/fw-decoder-regs.txt deleted file mode 100644 index cf52c8f20..000000000 --- a/Documentation/video4linux/cx2341x/fw-decoder-regs.txt +++ /dev/null @@ -1,817 +0,0 @@ -PVR350 Video decoder registers 0x02002800 -> 0x02002B00 -======================================================= - -This list has been worked out through trial and error. There will be mistakes -and omissions. Some registers have no obvious effect so it's hard to say what -they do, while others interact with each other, or require a certain load -sequence. Horizontal filter setup is one example, with six registers working -in unison and requiring a certain load sequence to correctly configure. The -indexed colour palette is much easier to set at just two registers, but again -it requires a certain load sequence. - -Some registers are fussy about what they are set to. Load in a bad value & the -decoder will fail. A firmware reload will often recover, but sometimes a reset -is required. For registers containing size information, setting them to 0 is -generally a bad idea. For other control registers i.e. 2878, you'll only find -out what values are bad when it hangs. - --------------------------------------------------------------------------------- -2800 - bit 0 - Decoder enable - 0 = disable - 1 = enable --------------------------------------------------------------------------------- -2804 - bits 0:31 - Decoder horizontal Y alias register 1 ---------------- -2808 - bits 0:31 - Decoder horizontal Y alias register 2 ---------------- -280C - bits 0:31 - Decoder horizontal Y alias register 3 ---------------- -2810 - bits 0:31 - Decoder horizontal Y alias register 4 ---------------- -2814 - bits 0:31 - Decoder horizontal Y alias register 5 ---------------- -2818 - bits 0:31 - Decoder horizontal Y alias trigger - - These six registers control the horizontal aliasing filter for the Y plane. - The first five registers must all be loaded before accessing the trigger - (2818), as this register actually clocks the data through for the first - five. - - To correctly program set the filter, this whole procedure must be done 16 - times. The actual register contents are copied from a lookup-table in the - firmware which contains 4 different filter settings. - --------------------------------------------------------------------------------- -281C - bits 0:31 - Decoder horizontal UV alias register 1 ---------------- -2820 - bits 0:31 - Decoder horizontal UV alias register 2 ---------------- -2824 - bits 0:31 - Decoder horizontal UV alias register 3 ---------------- -2828 - bits 0:31 - Decoder horizontal UV alias register 4 ---------------- -282C - bits 0:31 - Decoder horizontal UV alias register 5 ---------------- -2830 - bits 0:31 - Decoder horizontal UV alias trigger - - These six registers control the horizontal aliasing for the UV plane. - Operation is the same as the Y filter, with 2830 being the trigger - register. - --------------------------------------------------------------------------------- -2834 - bits 0:15 - Decoder Y source width in pixels - - bits 16:31 - Decoder Y destination width in pixels ---------------- -2838 - bits 0:15 - Decoder UV source width in pixels - - bits 16:31 - Decoder UV destination width in pixels - - NOTE: For both registers, the resulting image must be fully visible on - screen. If the image exceeds the right edge both the source and destination - size must be adjusted to reflect the visible portion. For the source width, - you must take into account the scaling when calculating the new value. --------------------------------------------------------------------------------- - -283C - bits 0:31 - Decoder Y horizontal scaling - Normally = Reg 2854 >> 2 ---------------- -2840 - bits 0:31 - Decoder ?? unknown - horizontal scaling - Usually 0x00080514 ---------------- -2844 - bits 0:31 - Decoder UV horizontal scaling - Normally = Reg 2854 >> 2 ---------------- -2848 - bits 0:31 - Decoder ?? unknown - horizontal scaling - Usually 0x00100514 ---------------- -284C - bits 0:31 - Decoder ?? unknown - Y plane - Usually 0x00200020 ---------------- -2850 - bits 0:31 - Decoder ?? unknown - UV plane - Usually 0x00200020 ---------------- -2854 - bits 0:31 - Decoder 'master' value for horizontal scaling ---------------- -2858 - bits 0:31 - Decoder ?? unknown - Usually 0 ---------------- -285C - bits 0:31 - Decoder ?? unknown - Normally = Reg 2854 >> 1 ---------------- -2860 - bits 0:31 - Decoder ?? unknown - Usually 0 ---------------- -2864 - bits 0:31 - Decoder ?? unknown - Normally = Reg 2854 >> 1 ---------------- -2868 - bits 0:31 - Decoder ?? unknown - Usually 0 - - Most of these registers either control horizontal scaling, or appear linked - to it in some way. Register 2854 contains the 'master' value & the other - registers can be calculated from that one. You must also remember to - correctly set the divider in Reg 2874. - - To enlarge: - Reg 2854 = (source_width * 0x00200000) / destination_width - Reg 2874 = No divide - - To reduce from full size down to half size: - Reg 2854 = (source_width/2 * 0x00200000) / destination width - Reg 2874 = Divide by 2 - - To reduce from half size down to quarter size: - Reg 2854 = (source_width/4 * 0x00200000) / destination width - Reg 2874 = Divide by 4 - - The result is always rounded up. - --------------------------------------------------------------------------------- -286C - bits 0:15 - Decoder horizontal Y buffer offset - - bits 15:31 - Decoder horizontal UV buffer offset - - Offset into the video image buffer. If the offset is gradually incremented, - the on screen image will move left & wrap around higher up on the right. - --------------------------------------------------------------------------------- -2870 - bits 0:15 - Decoder horizontal Y output offset - - bits 16:31 - Decoder horizontal UV output offset - - Offsets the actual video output. Controls output alignment of the Y & UV - planes. The higher the value, the greater the shift to the left. Use - reg 2890 to move the image right. - --------------------------------------------------------------------------------- -2874 - bits 0:1 - Decoder horizontal Y output size divider - 00 = No divide - 01 = Divide by 2 - 10 = Divide by 3 - - bits 4:5 - Decoder horizontal UV output size divider - 00 = No divide - 01 = Divide by 2 - 10 = Divide by 3 - - bit 8 - Decoder ?? unknown - 0 = Normal - 1 = Affects video output levels - - bit 16 - Decoder ?? unknown - 0 = Normal - 1 = Disable horizontal filter - --------------------------------------------------------------------------------- -2878 - bit 0 - ?? unknown - - bit 1 - osd on/off - 0 = osd off - 1 = osd on - - bit 2 - Decoder + osd video timing - 0 = NTSC - 1 = PAL - - bits 3:4 - ?? unknown - - bit 5 - Decoder + osd - Swaps upper & lower fields - --------------------------------------------------------------------------------- -287C - bits 0:10 - Decoder & osd ?? unknown - Moves entire screen horizontally. Starts at 0x005 with the screen - shifted heavily to the right. Incrementing in steps of 0x004 will - gradually shift the screen to the left. - - bits 11:31 - ?? unknown - - Normally contents are 0x00101111 (NTSC) or 0x1010111d (PAL) - --------------------------------------------------------------------------------- -2880 -------- ?? unknown -2884 -------- ?? unknown --------------------------------------------------------------------------------- -2888 - bit 0 - Decoder + osd ?? unknown - 0 = Normal - 1 = Misaligned fields (Correctable through 289C & 28A4) - - bit 4 - ?? unknown - - bit 8 - ?? unknown - - Warning: Bad values will require a firmware reload to recover. - Known to be bad are 0x000,0x011,0x100,0x111 --------------------------------------------------------------------------------- -288C - bits 0:15 - osd ?? unknown - Appears to affect the osd position stability. The higher the value the - more unstable it becomes. Decoder output remains stable. - - bits 16:31 - osd ?? unknown - Same as bits 0:15 - --------------------------------------------------------------------------------- -2890 - bits 0:11 - Decoder output horizontal offset. - - Horizontal offset moves the video image right. A small left shift is - possible, but it's better to use reg 2870 for that due to its greater - range. - - NOTE: Video corruption will occur if video window is shifted off the right - edge. To avoid this read the notes for 2834 & 2838. --------------------------------------------------------------------------------- -2894 - bits 0:23 - Decoder output video surround colour. - - Contains the colour (in yuv) used to fill the screen when the video is - running in a window. --------------------------------------------------------------------------------- -2898 - bits 0:23 - Decoder video window colour - Contains the colour (in yuv) used to fill the video window when the - video is turned off. - - bit 24 - Decoder video output - 0 = Video on - 1 = Video off - - bit 28 - Decoder plane order - 0 = Y,UV - 1 = UV,Y - - bit 29 - Decoder second plane byte order - 0 = Normal (UV) - 1 = Swapped (VU) - - In normal usage, the first plane is Y & the second plane is UV. Though the - order of the planes can be swapped, only the byte order of the second plane - can be swapped. This isn't much use for the Y plane, but can be useful for - the UV plane. - --------------------------------------------------------------------------------- -289C - bits 0:15 - Decoder vertical field offset 1 - - bits 16:31 - Decoder vertical field offset 2 - - Controls field output vertical alignment. The higher the number, the lower - the image on screen. Known starting values are 0x011E0017 (NTSC) & - 0x01500017 (PAL) --------------------------------------------------------------------------------- -28A0 - bits 0:15 - Decoder & osd width in pixels - - bits 16:31 - Decoder & osd height in pixels - - All output from the decoder & osd are disabled beyond this area. Decoder - output will simply go black outside of this region. If the osd tries to - exceed this area it will become corrupt. --------------------------------------------------------------------------------- -28A4 - bits 0:11 - osd left shift. - - Has a range of 0x770->0x7FF. With the exception of 0, any value outside of - this range corrupts the osd. --------------------------------------------------------------------------------- -28A8 - bits 0:15 - osd vertical field offset 1 - - bits 16:31 - osd vertical field offset 2 - - Controls field output vertical alignment. The higher the number, the lower - the image on screen. Known starting values are 0x011E0017 (NTSC) & - 0x01500017 (PAL) --------------------------------------------------------------------------------- -28AC -------- ?? unknown - | - V -28BC -------- ?? unknown --------------------------------------------------------------------------------- -28C0 - bit 0 - Current output field - 0 = first field - 1 = second field - - bits 16:31 - Current scanline - The scanline counts from the top line of the first field - through to the last line of the second field. --------------------------------------------------------------------------------- -28C4 -------- ?? unknown - | - V -28F8 -------- ?? unknown --------------------------------------------------------------------------------- -28FC - bit 0 - ?? unknown - 0 = Normal - 1 = Breaks decoder & osd output --------------------------------------------------------------------------------- -2900 - bits 0:31 - Decoder vertical Y alias register 1 ---------------- -2904 - bits 0:31 - Decoder vertical Y alias register 2 ---------------- -2908 - bits 0:31 - Decoder vertical Y alias trigger - - These three registers control the vertical aliasing filter for the Y plane. - Operation is similar to the horizontal Y filter (2804). The only real - difference is that there are only two registers to set before accessing - the trigger register (2908). As for the horizontal filter, the values are - taken from a lookup table in the firmware, and the procedure must be - repeated 16 times to fully program the filter. --------------------------------------------------------------------------------- -290C - bits 0:31 - Decoder vertical UV alias register 1 ---------------- -2910 - bits 0:31 - Decoder vertical UV alias register 2 ---------------- -2914 - bits 0:31 - Decoder vertical UV alias trigger - - These three registers control the vertical aliasing filter for the UV - plane. Operation is the same as the Y filter, with 2914 being the trigger. --------------------------------------------------------------------------------- -2918 - bits 0:15 - Decoder Y source height in pixels - - bits 16:31 - Decoder Y destination height in pixels ---------------- -291C - bits 0:15 - Decoder UV source height in pixels divided by 2 - - bits 16:31 - Decoder UV destination height in pixels - - NOTE: For both registers, the resulting image must be fully visible on - screen. If the image exceeds the bottom edge both the source and - destination size must be adjusted to reflect the visible portion. For the - source height, you must take into account the scaling when calculating the - new value. --------------------------------------------------------------------------------- -2920 - bits 0:31 - Decoder Y vertical scaling - Normally = Reg 2930 >> 2 ---------------- -2924 - bits 0:31 - Decoder Y vertical scaling - Normally = Reg 2920 + 0x514 ---------------- -2928 - bits 0:31 - Decoder UV vertical scaling - When enlarging = Reg 2930 >> 2 - When reducing = Reg 2930 >> 3 ---------------- -292C - bits 0:31 - Decoder UV vertical scaling - Normally = Reg 2928 + 0x514 ---------------- -2930 - bits 0:31 - Decoder 'master' value for vertical scaling ---------------- -2934 - bits 0:31 - Decoder ?? unknown - Y vertical scaling ---------------- -2938 - bits 0:31 - Decoder Y vertical scaling - Normally = Reg 2930 ---------------- -293C - bits 0:31 - Decoder ?? unknown - Y vertical scaling ---------------- -2940 - bits 0:31 - Decoder UV vertical scaling - When enlarging = Reg 2930 >> 1 - When reducing = Reg 2930 ---------------- -2944 - bits 0:31 - Decoder ?? unknown - UV vertical scaling ---------------- -2948 - bits 0:31 - Decoder UV vertical scaling - Normally = Reg 2940 ---------------- -294C - bits 0:31 - Decoder ?? unknown - UV vertical scaling - - Most of these registers either control vertical scaling, or appear linked - to it in some way. Register 2930 contains the 'master' value & all other - registers can be calculated from that one. You must also remember to - correctly set the divider in Reg 296C - - To enlarge: - Reg 2930 = (source_height * 0x00200000) / destination_height - Reg 296C = No divide - - To reduce from full size down to half size: - Reg 2930 = (source_height/2 * 0x00200000) / destination height - Reg 296C = Divide by 2 - - To reduce from half down to quarter. - Reg 2930 = (source_height/4 * 0x00200000) / destination height - Reg 296C = Divide by 4 - --------------------------------------------------------------------------------- -2950 - bits 0:15 - Decoder Y line index into display buffer, first field - - bits 16:31 - Decoder Y vertical line skip, first field --------------------------------------------------------------------------------- -2954 - bits 0:15 - Decoder Y line index into display buffer, second field - - bits 16:31 - Decoder Y vertical line skip, second field --------------------------------------------------------------------------------- -2958 - bits 0:15 - Decoder UV line index into display buffer, first field - - bits 16:31 - Decoder UV vertical line skip, first field --------------------------------------------------------------------------------- -295C - bits 0:15 - Decoder UV line index into display buffer, second field - - bits 16:31 - Decoder UV vertical line skip, second field --------------------------------------------------------------------------------- -2960 - bits 0:15 - Decoder destination height minus 1 - - bits 16:31 - Decoder destination height divided by 2 --------------------------------------------------------------------------------- -2964 - bits 0:15 - Decoder Y vertical offset, second field - - bits 16:31 - Decoder Y vertical offset, first field - - These two registers shift the Y plane up. The higher the number, the - greater the shift. --------------------------------------------------------------------------------- -2968 - bits 0:15 - Decoder UV vertical offset, second field - - bits 16:31 - Decoder UV vertical offset, first field - - These two registers shift the UV plane up. The higher the number, the - greater the shift. --------------------------------------------------------------------------------- -296C - bits 0:1 - Decoder vertical Y output size divider - 00 = No divide - 01 = Divide by 2 - 10 = Divide by 4 - - bits 8:9 - Decoder vertical UV output size divider - 00 = No divide - 01 = Divide by 2 - 10 = Divide by 4 --------------------------------------------------------------------------------- -2970 - bit 0 - Decoder ?? unknown - 0 = Normal - 1 = Affect video output levels - - bit 16 - Decoder ?? unknown - 0 = Normal - 1 = Disable vertical filter - --------------------------------------------------------------------------------- -2974 -------- ?? unknown - | - V -29EF -------- ?? unknown --------------------------------------------------------------------------------- -2A00 - bits 0:2 - osd colour mode - 000 = 8 bit indexed - 001 = 16 bit (565) - 010 = 15 bit (555) - 011 = 12 bit (444) - 100 = 32 bit (8888) - - bits 4:5 - osd display bpp - 01 = 8 bit - 10 = 16 bit - 11 = 32 bit - - bit 8 - osd global alpha - 0 = Off - 1 = On - - bit 9 - osd local alpha - 0 = Off - 1 = On - - bit 10 - osd colour key - 0 = Off - 1 = On - - bit 11 - osd ?? unknown - Must be 1 - - bit 13 - osd colour space - 0 = ARGB - 1 = AYVU - - bits 16:31 - osd ?? unknown - Must be 0x001B (some kind of buffer pointer ?) - - When the bits-per-pixel is set to 8, the colour mode is ignored and - assumed to be 8 bit indexed. For 16 & 32 bits-per-pixel the colour depth - is honoured, and when using a colour depth that requires fewer bytes than - allocated the extra bytes are used as padding. So for a 32 bpp with 8 bit - index colour, there are 3 padding bytes per pixel. It's also possible to - select 16bpp with a 32 bit colour mode. This results in the pixel width - being doubled, but the color key will not work as expected in this mode. - - Colour key is as it suggests. You designate a colour which will become - completely transparent. When using 565, 555 or 444 colour modes, the - colour key is always 16 bits wide. The colour to key on is set in Reg 2A18. - - Local alpha works differently depending on the colour mode. For 32bpp & 8 - bit indexed, local alpha is a per-pixel 256 step transparency, with 0 being - transparent and 255 being solid. For the 16bpp modes 555 & 444, the unused - bit(s) act as a simple transparency switch, with 0 being solid & 1 being - fully transparent. There is no local alpha support for 16bit 565. - - Global alpha is a 256 step transparency that applies to the entire osd, - with 0 being transparent & 255 being solid. - - It's possible to combine colour key, local alpha & global alpha. --------------------------------------------------------------------------------- -2A04 - bits 0:15 - osd x coord for left edge - - bits 16:31 - osd y coord for top edge ---------------- -2A08 - bits 0:15 - osd x coord for right edge - - bits 16:31 - osd y coord for bottom edge - - For both registers, (0,0) = top left corner of the display area. These - registers do not control the osd size, only where it's positioned & how - much is visible. The visible osd area cannot exceed the right edge of the - display, otherwise the osd will become corrupt. See reg 2A10 for - setting osd width. --------------------------------------------------------------------------------- -2A0C - bits 0:31 - osd buffer index - - An index into the osd buffer. Slowly incrementing this moves the osd left, - wrapping around onto the right edge --------------------------------------------------------------------------------- -2A10 - bits 0:11 - osd buffer 32 bit word width - - Contains the width of the osd measured in 32 bit words. This means that all - colour modes are restricted to a byte width which is divisible by 4. --------------------------------------------------------------------------------- -2A14 - bits 0:15 - osd height in pixels - - bits 16:32 - osd line index into buffer - osd will start displaying from this line. --------------------------------------------------------------------------------- -2A18 - bits 0:31 - osd colour key - - Contains the colour value which will be transparent. --------------------------------------------------------------------------------- -2A1C - bits 0:7 - osd global alpha - - Contains the global alpha value (equiv ivtvfbctl --alpha XX) --------------------------------------------------------------------------------- -2A20 -------- ?? unknown - | - V -2A2C -------- ?? unknown --------------------------------------------------------------------------------- -2A30 - bits 0:7 - osd colour to change in indexed palette ---------------- -2A34 - bits 0:31 - osd colour for indexed palette - - To set the new palette, first load the index of the colour to change into - 2A30, then load the new colour into 2A34. The full palette is 256 colours, - so the index range is 0x00-0xFF --------------------------------------------------------------------------------- -2A38 -------- ?? unknown -2A3C -------- ?? unknown --------------------------------------------------------------------------------- -2A40 - bits 0:31 - osd ?? unknown - - Affects overall brightness, wrapping around to black --------------------------------------------------------------------------------- -2A44 - bits 0:31 - osd ?? unknown - - Green tint --------------------------------------------------------------------------------- -2A48 - bits 0:31 - osd ?? unknown - - Red tint --------------------------------------------------------------------------------- -2A4C - bits 0:31 - osd ?? unknown - - Affects overall brightness, wrapping around to black --------------------------------------------------------------------------------- -2A50 - bits 0:31 - osd ?? unknown - - Colour shift --------------------------------------------------------------------------------- -2A54 - bits 0:31 - osd ?? unknown - - Colour shift --------------------------------------------------------------------------------- -2A58 -------- ?? unknown - | - V -2AFC -------- ?? unknown --------------------------------------------------------------------------------- -2B00 - bit 0 - osd filter control - 0 = filter off - 1 = filter on - - bits 1:4 - osd ?? unknown - --------------------------------------------------------------------------------- - -v0.4 - 12 March 2007 - Ian Armstrong (ian@iarmst.demon.co.uk) - -- cgit v1.2.3