From 670027c507e99521d416994a18a498def9ef2ea3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?= Date: Sat, 22 Oct 2016 19:31:08 -0300 Subject: Linux-libre 4.8.3-gnu --- Documentation/video4linux/cx2341x/fw-upload.txt | 49 ------------------------- 1 file changed, 49 deletions(-) delete mode 100644 Documentation/video4linux/cx2341x/fw-upload.txt (limited to 'Documentation/video4linux/cx2341x/fw-upload.txt') diff --git a/Documentation/video4linux/cx2341x/fw-upload.txt b/Documentation/video4linux/cx2341x/fw-upload.txt deleted file mode 100644 index 60c502ce3..000000000 --- a/Documentation/video4linux/cx2341x/fw-upload.txt +++ /dev/null @@ -1,49 +0,0 @@ -This document describes how to upload the cx2341x firmware to the card. - -How to find -=========== - -See the web pages of the various projects that uses this chip for information -on how to obtain the firmware. - -The firmware stored in a Windows driver can be detected as follows: - -- Each firmware image is 256k bytes. -- The 1st 32-bit word of the Encoder image is 0x0000da7 -- The 1st 32-bit word of the Decoder image is 0x00003a7 -- The 2nd 32-bit word of both images is 0xaa55bb66 - -How to load -=========== - -- Issue the FWapi command to stop the encoder if it is running. Wait for the - command to complete. -- Issue the FWapi command to stop the decoder if it is running. Wait for the - command to complete. -- Issue the I2C command to the digitizer to stop emitting VSYNC events. -- Issue the FWapi command to halt the encoder's firmware. -- Sleep for 10ms. -- Issue the FWapi command to halt the decoder's firmware. -- Sleep for 10ms. -- Write 0x00000000 to register 0x2800 to stop the Video Display Module. -- Write 0x00000005 to register 0x2D00 to stop the AO (audio output?). -- Write 0x00000000 to register 0xA064 to ping? the APU. -- Write 0xFFFFFFFE to register 0x9058 to stop the VPU. -- Write 0xFFFFFFFF to register 0x9054 to reset the HW blocks. -- Write 0x00000001 to register 0x9050 to stop the SPU. -- Sleep for 10ms. -- Write 0x0000001A to register 0x07FC to init the Encoder SDRAM's pre-charge. -- Write 0x80000640 to register 0x07F8 to init the Encoder SDRAM's refresh to 1us. -- Write 0x0000001A to register 0x08FC to init the Decoder SDRAM's pre-charge. -- Write 0x80000640 to register 0x08F8 to init the Decoder SDRAM's refresh to 1us. -- Sleep for 512ms. (600ms is recommended) -- Transfer the encoder's firmware image to offset 0 in Encoder memory space. -- Transfer the decoder's firmware image to offset 0 in Decoder memory space. -- Use a read-modify-write operation to Clear bit 0 of register 0x9050 to - re-enable the SPU. -- Sleep for 1 second. -- Use a read-modify-write operation to Clear bits 3 and 0 of register 0x9058 - to re-enable the VPU. -- Sleep for 1 second. -- Issue status API commands to both firmware images to verify. - -- cgit v1.2.3