From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- Documentation/w1/slaves/w1_ds28e04 | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/w1/slaves/w1_ds28e04 (limited to 'Documentation/w1/slaves/w1_ds28e04') diff --git a/Documentation/w1/slaves/w1_ds28e04 b/Documentation/w1/slaves/w1_ds28e04 new file mode 100644 index 000000000..7819b65cf --- /dev/null +++ b/Documentation/w1/slaves/w1_ds28e04 @@ -0,0 +1,36 @@ +Kernel driver w1_ds28e04 +======================== + +Supported chips: + * Maxim DS28E04-100 4096-Bit Addressable 1-Wire EEPROM with PIO + +supported family codes: + W1_FAMILY_DS28E04 0x1C + +Author: Markus Franke, + +Description +----------- + +Support is provided through the sysfs files "eeprom" and "pio". CRC checking +during memory accesses can optionally be enabled/disabled via the device +attribute "crccheck". The strong pull-up can optionally be enabled/disabled +via the module parameter "w1_strong_pullup". + +Memory Access + + A read operation on the "eeprom" file reads the given amount of bytes + from the EEPROM of the DS28E04. + + A write operation on the "eeprom" file writes the given byte sequence + to the EEPROM of the DS28E04. If CRC checking mode is enabled only + fully aligned blocks of 32 bytes with valid CRC16 values (in bytes 30 + and 31) are allowed to be written. + +PIO Access + + The 2 PIOs of the DS28E04-100 are accessible via the "pio" sysfs file. + + The current status of the PIO's is returned as an 8 bit value. Bit 0/1 + represent the state of PIO_0/PIO_1. Bits 2..7 do not care. The PIO's are + driven low-active, i.e. the driver delivers/expects low-active values. -- cgit v1.2.3-54-g00ecf