From 376027f2a3888ef3dec73ee41f85d90e51162d78 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?= Date: Tue, 8 Sep 2015 11:24:16 -0300 Subject: Add TuxOnIce support --- Documentation/kernel-parameters.txt | 3 + Documentation/power/tuxonice-internals.txt | 532 ++++++++++++++++ Documentation/power/tuxonice.txt | 948 +++++++++++++++++++++++++++++ 3 files changed, 1483 insertions(+) create mode 100644 Documentation/power/tuxonice-internals.txt create mode 100644 Documentation/power/tuxonice.txt (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1d6f0459c..8e379fae1 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3896,6 +3896,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted. HIGHMEM regardless of setting of CONFIG_HIGHPTE. + uuid_debug= (Boolean) whether to enable debugging of TuxOnIce's + uuid support. + vdso= [X86,SH] On X86_32, this is an alias for vdso32=. Otherwise: diff --git a/Documentation/power/tuxonice-internals.txt b/Documentation/power/tuxonice-internals.txt new file mode 100644 index 000000000..0c6a2163a --- /dev/null +++ b/Documentation/power/tuxonice-internals.txt @@ -0,0 +1,532 @@ + TuxOnIce 4.0 Internal Documentation. + Updated to 23 March 2015 + +(Please note that incremental image support mentioned in this document is work +in progress. This document may need updating prior to the actual release of +4.0!) + +1. Introduction. + + TuxOnIce 4.0 is an addition to the Linux Kernel, designed to + allow the user to quickly shutdown and quickly boot a computer, without + needing to close documents or programs. It is equivalent to the + hibernate facility in some laptops. This implementation, however, + requires no special BIOS or hardware support. + + The code in these files is based upon the original implementation + prepared by Gabor Kuti and additional work by Pavel Machek and a + host of others. This code has been substantially reworked by Nigel + Cunningham, again with the help and testing of many others, not the + least of whom are Bernard Blackham and Michael Frank. At its heart, + however, the operation is essentially the same as Gabor's version. + +2. Overview of operation. + + The basic sequence of operations is as follows: + + a. Quiesce all other activity. + b. Ensure enough memory and storage space are available, and attempt + to free memory/storage if necessary. + c. Allocate the required memory and storage space. + d. Write the image. + e. Power down. + + There are a number of complicating factors which mean that things are + not as simple as the above would imply, however... + + o The activity of each process must be stopped at a point where it will + not be holding locks necessary for saving the image, or unexpectedly + restart operations due to something like a timeout and thereby make + our image inconsistent. + + o It is desirous that we sync outstanding I/O to disk before calculating + image statistics. This reduces corruption if one should suspend but + then not resume, and also makes later parts of the operation safer (see + below). + + o We need to get as close as we can to an atomic copy of the data. + Inconsistencies in the image will result in inconsistent memory contents at + resume time, and thus in instability of the system and/or file system + corruption. This would appear to imply a maximum image size of one half of + the amount of RAM, but we have a solution... (again, below). + + o In 2.6 and later, we choose to play nicely with the other suspend-to-disk + implementations. + +3. Detailed description of internals. + + a. Quiescing activity. + + Safely quiescing the system is achieved using three separate but related + aspects. + + First, we use the vanilla kerne's support for freezing processes. This code + is based on the observation that the vast majority of processes don't need + to run during suspend. They can be 'frozen'. The kernel therefore + implements a refrigerator routine, which processes enter and in which they + remain until the cycle is complete. Processes enter the refrigerator via + try_to_freeze() invocations at appropriate places. A process cannot be + frozen in any old place. It must not be holding locks that will be needed + for writing the image or freezing other processes. For this reason, + userspace processes generally enter the refrigerator via the signal + handling code, and kernel threads at the place in their event loops where + they drop locks and yield to other processes or sleep. The task of freezing + processes is complicated by the fact that there can be interdependencies + between processes. Freezing process A before process B may mean that + process B cannot be frozen, because it stops at waiting for process A + rather than in the refrigerator. This issue is seen where userspace waits + on freezeable kernel threads or fuse filesystem threads. To address this + issue, we implement the following algorithm for quiescing activity: + + - Freeze filesystems (including fuse - userspace programs starting + new requests are immediately frozen; programs already running + requests complete their work before being frozen in the next + step) + - Freeze userspace + - Thaw filesystems (this is safe now that userspace is frozen and no + fuse requests are outstanding). + - Invoke sys_sync (noop on fuse). + - Freeze filesystems + - Freeze kernel threads + + If we need to free memory, we thaw kernel threads and filesystems, but not + userspace. We can then free caches without worrying about deadlocks due to + swap files being on frozen filesystems or such like. + + b. Ensure enough memory & storage are available. + + We have a number of constraints to meet in order to be able to successfully + suspend and resume. + + First, the image will be written in two parts, described below. One of + these parts needs to have an atomic copy made, which of course implies a + maximum size of one half of the amount of system memory. The other part + ('pageset') is not atomically copied, and can therefore be as large or + small as desired. + + Second, we have constraints on the amount of storage available. In these + calculations, we may also consider any compression that will be done. The + cryptoapi module allows the user to configure an expected compression ratio. + + Third, the user can specify an arbitrary limit on the image size, in + megabytes. This limit is treated as a soft limit, so that we don't fail the + attempt to suspend if we cannot meet this constraint. + + c. Allocate the required memory and storage space. + + Having done the initial freeze, we determine whether the above constraints + are met, and seek to allocate the metadata for the image. If the constraints + are not met, or we fail to allocate the required space for the metadata, we + seek to free the amount of memory that we calculate is needed and try again. + We allow up to four iterations of this loop before aborting the cycle. If + we do fail, it should only be because of a bug in TuxOnIce's calculations + or the vanilla kernel code for freeing memory. + + These steps are merged together in the prepare_image function, found in + prepare_image.c. The functions are merged because of the cyclical nature + of the problem of calculating how much memory and storage is needed. Since + the data structures containing the information about the image must + themselves take memory and use storage, the amount of memory and storage + required changes as we prepare the image. Since the changes are not large, + only one or two iterations will be required to achieve a solution. + + The recursive nature of the algorithm is miminised by keeping user space + frozen while preparing the image, and by the fact that our records of which + pages are to be saved and which pageset they are saved in use bitmaps (so + that changes in number or fragmentation of the pages to be saved don't + feedback via changes in the amount of memory needed for metadata). The + recursiveness is thus limited to any extra slab pages allocated to store the + extents that record storage used, and the effects of seeking to free memory. + + d. Write the image. + + We previously mentioned the need to create an atomic copy of the data, and + the half-of-memory limitation that is implied in this. This limitation is + circumvented by dividing the memory to be saved into two parts, called + pagesets. + + Pageset2 contains most of the page cache - the pages on the active and + inactive LRU lists that aren't needed or modified while TuxOnIce is + running, so they can be safely written without an atomic copy. They are + therefore saved first and reloaded last. While saving these pages, + TuxOnIce carefully ensures that the work of writing the pages doesn't make + the image inconsistent. With the support for Kernel (Video) Mode Setting + going into the kernel at the time of writing, we need to check for pages + on the LRU that are used by KMS, and exclude them from pageset2. They are + atomically copied as part of pageset 1. + + Once pageset2 has been saved, we prepare to do the atomic copy of remaining + memory. As part of the preparation, we power down drivers, thereby providing + them with the opportunity to have their state recorded in the image. The + amount of memory allocated by drivers for this is usually negligible, but if + DRI is in use, video drivers may require significants amounts. Ideally we + would be able to query drivers while preparing the image as to the amount of + memory they will need. Unfortunately no such mechanism exists at the time of + writing. For this reason, TuxOnIce allows the user to set an + 'extra_pages_allowance', which is used to seek to ensure sufficient memory + is available for drivers at this point. TuxOnIce also lets the user set this + value to 0. In this case, a test driver suspend is done while preparing the + image, and the difference (plus a margin) used instead. TuxOnIce will also + automatically restart the hibernation process (twice at most) if it finds + that the extra pages allowance is not sufficient. It will then use what was + actually needed (plus a margin, again). Failure to hibernate should thus + be an extremely rare occurence. + + Having suspended the drivers, we save the CPU context before making an + atomic copy of pageset1, resuming the drivers and saving the atomic copy. + After saving the two pagesets, we just need to save our metadata before + powering down. + + As we mentioned earlier, the contents of pageset2 pages aren't needed once + they've been saved. We therefore use them as the destination of our atomic + copy. In the unlikely event that pageset1 is larger, extra pages are + allocated while the image is being prepared. This is normally only a real + possibility when the system has just been booted and the page cache is + small. + + This is where we need to be careful about syncing, however. Pageset2 will + probably contain filesystem meta data. If this is overwritten with pageset1 + and then a sync occurs, the filesystem will be corrupted - at least until + resume time and another sync of the restored data. Since there is a + possibility that the user might not resume or (may it never be!) that + TuxOnIce might oops, we do our utmost to avoid syncing filesystems after + copying pageset1. + + e. Incremental images + + TuxOnIce 4.0 introduces a new incremental image mode which changes things a + little. When incremental images are enabled, we save a 'normal' image the + first time we hibernate. One resume however, we do not free the image or + the associated storage. Instead, it is retained until the next attempt at + hibernating and a mechanism is enabled which is used to track which pages + of memory are modified between the two cycles. The modified pages can then + be added to the existing image, rather than unmodified pages being saved + again unnecessarily. + + Incremental image support is available in 64 bit Linux only, due to the + requirement for extra page flags. + + This support is accomplished in the following way: + + 1) Tracking of pages. + + The tracking of changed pages is accomplished using the page fault + mechanism. When we reach a point at which we want to start tracking + changes, most pages are marked read-only and also flagged as being + read-only because of this support. Since this cannot happen for every page + of RAM, some are marked as untracked and always treated as modified whn + preparing an incremental iamge. When a process attempts to modify a page + that is marked read-only in this way, a page fault occurs, with TuxOnIce + code marking the page writable and dirty before allowing the write to + continue. In this way, the effect of incremental images on performance is + minimised - a page only causes a fault once. Small modifications to the + page allocator further reduce the number of faults that occur - free pages + are not tracked; they are made writable and marked as dirty as part of + being allocated. + + 2) Saving the incremental image / atomicity. + + The page fault mechanism is also used to improve the means by which + atomicity of the image is acheived. When it is time to do an atomic copy, + the flags for pages are reset, with the result being that it is no longer + necessary for us to do an atomic of pageset1. Instead, we normally write + the uncopied pages to disk. When an attempt is made to modify a page that + has not yet been saved, the page-fault mechanism makes a copy of the page + prior to allowing the write. This copy is then written to disk. Likewise, + on resume, if a process attempts to write to a page that has been read + while the rest of the image is still being loaded, a copy of that page is + made prior to the write being allowed. At the end of loading the image, + modified pages can thus be restored to their 'atomic copy' contents prior + to restarting normal operation. We also mark pages that are yet to be read + as invalid PFNs, so that we can capture as a bug any attempt by a + half-restored kernel to access a page that hasn't yet been reloaded. + + f. Power down. + + Powering down uses standard kernel routines. TuxOnIce supports powering down + using the ACPI S3, S4 and S5 methods or the kernel's non-ACPI power-off. + Supporting suspend to ram (S3) as a power off option might sound strange, + but it allows the user to quickly get their system up and running again if + the battery doesn't run out (we just need to re-read the overwritten pages) + and if the battery does run out (or the user removes power), they can still + resume. + +4. Data Structures. + + TuxOnIce uses three main structures to store its metadata and configuration + information: + + a) Pageflags bitmaps. + + TuxOnIce records which pages will be in pageset1, pageset2, the destination + of the atomic copy and the source of the atomically restored image using + bitmaps. The code used is that written for swsusp, with small improvements + to match TuxOnIce's requirements. + + The pageset1 bitmap is thus easily stored in the image header for use at + resume time. + + As mentioned above, using bitmaps also means that the amount of memory and + storage required for recording the above information is constant. This + greatly simplifies the work of preparing the image. In earlier versions of + TuxOnIce, extents were used to record which pages would be stored. In that + case, however, eating memory could result in greater fragmentation of the + lists of pages, which in turn required more memory to store the extents and + more storage in the image header. These could in turn require further + freeing of memory, and another iteration. All of this complexity is removed + by having bitmaps. + + Bitmaps also make a lot of sense because TuxOnIce only ever iterates + through the lists. There is therefore no cost to not being able to find the + nth page in order 0 time. We only need to worry about the cost of finding + the n+1th page, given the location of the nth page. Bitwise optimisations + help here. + + b) Extents for block data. + + TuxOnIce supports writing the image to multiple block devices. In the case + of swap, multiple partitions and/or files may be in use, and we happily use + them all (with the exception of compcache pages, which we allocate but do + not use). This use of multiple block devices is accomplished as follows: + + Whatever the actual source of the allocated storage, the destination of the + image can be viewed in terms of one or more block devices, and on each + device, a list of sectors. To simplify matters, we only use contiguous, + PAGE_SIZE aligned sectors, like the swap code does. + + Since sector numbers on each bdev may well not start at 0, it makes much + more sense to use extents here. Contiguous ranges of pages can thus be + represented in the extents by contiguous values. + + Variations in block size are taken account of in transforming this data + into the parameters for bio submission. + + We can thus implement a layer of abstraction wherein the core of TuxOnIce + doesn't have to worry about which device we're currently writing to or + where in the device we are. It simply requests that the next page in the + pageset or header be written, leaving the details to this lower layer. + The lower layer remembers where in the sequence of devices and blocks each + pageset starts. The header always starts at the beginning of the allocated + storage. + + So extents are: + + struct extent { + unsigned long minimum, maximum; + struct extent *next; + } + + These are combined into chains of extents for a device: + + struct extent_chain { + int size; /* size of the extent ie sum (max-min+1) */ + int allocs, frees; + char *name; + struct extent *first, *last_touched; + }; + + For each bdev, we need to store a little more info (simplified definition): + + struct toi_bdev_info { + struct block_device *bdev; + + char uuid[17]; + dev_t dev_t; + int bmap_shift; + int blocks_per_page; + }; + + The uuid is the main means used to identify the device in the storage + image. This means we can cope with the dev_t representation of a device + changing between saving the image and restoring it, as may happen on some + bioses or in the LVM case. + + bmap_shift and blocks_per_page apply the effects of variations in blocks + per page settings for the filesystem and underlying bdev. For most + filesystems, these are the same, but for xfs, they can have independant + values. + + Combining these two structures together, we have everything we need to + record what devices and what blocks on each device are being used to + store the image, and to submit i/o using bio_submit. + + The last elements in the picture are a means of recording how the storage + is being used. + + We do this first and foremost by implementing a layer of abstraction on + top of the devices and extent chains which allows us to view however many + devices there might be as one long storage tape, with a single 'head' that + tracks a 'current position' on the tape: + + struct extent_iterate_state { + struct extent_chain *chains; + int num_chains; + int current_chain; + struct extent *current_extent; + unsigned long current_offset; + }; + + That is, *chains points to an array of size num_chains of extent chains. + For the filewriter, this is always a single chain. For the swapwriter, the + array is of size MAX_SWAPFILES. + + current_chain, current_extent and current_offset thus point to the current + index in the chains array (and into a matching array of struct + suspend_bdev_info), the current extent in that chain (to optimise access), + and the current value in the offset. + + The image is divided into three parts: + - The header + - Pageset 1 + - Pageset 2 + + The header always starts at the first device and first block. We know its + size before we begin to save the image because we carefully account for + everything that will be stored in it. + + The second pageset (LRU) is stored first. It begins on the next page after + the end of the header. + + The first pageset is stored second. It's start location is only known once + pageset2 has been saved, since pageset2 may be compressed as it is written. + This location is thus recorded at the end of saving pageset2. It is page + aligned also. + + Since this information is needed at resume time, and the location of extents + in memory will differ at resume time, this needs to be stored in a portable + way: + + struct extent_iterate_saved_state { + int chain_num; + int extent_num; + unsigned long offset; + }; + + We can thus implement a layer of abstraction wherein the core of TuxOnIce + doesn't have to worry about which device we're currently writing to or + where in the device we are. It simply requests that the next page in the + pageset or header be written, leaving the details to this layer, and + invokes the routines to remember and restore the position, without having + to worry about the details of how the data is arranged on disk or such like. + + c) Modules + + One aim in designing TuxOnIce was to make it flexible. We wanted to allow + for the implementation of different methods of transforming a page to be + written to disk and different methods of getting the pages stored. + + In early versions (the betas and perhaps Suspend1), compression support was + inlined in the image writing code, and the data structures and code for + managing swap were intertwined with the rest of the code. A number of people + had expressed interest in implementing image encryption, and alternative + methods of storing the image. + + In order to achieve this, TuxOnIce was given a modular design. + + A module is a single file which encapsulates the functionality needed + to transform a pageset of data (encryption or compression, for example), + or to write the pageset to a device. The former type of module is called + a 'page-transformer', the later a 'writer'. + + Modules are linked together in pipeline fashion. There may be zero or more + page transformers in a pipeline, and there is always exactly one writer. + The pipeline follows this pattern: + + --------------------------------- + | TuxOnIce Core | + --------------------------------- + | + | + --------------------------------- + | Page transformer 1 | + --------------------------------- + | + | + --------------------------------- + | Page transformer 2 | + --------------------------------- + | + | + --------------------------------- + | Writer | + --------------------------------- + + During the writing of an image, the core code feeds pages one at a time + to the first module. This module performs whatever transformations it + implements on the incoming data, completely consuming the incoming data and + feeding output in a similar manner to the next module. + + All routines are SMP safe, and the final result of the transformations is + written with an index (provided by the core) and size of the output by the + writer. As a result, we can have multithreaded I/O without needing to + worry about the sequence in which pages are written (or read). + + During reading, the pipeline works in the reverse direction. The core code + calls the first module with the address of a buffer which should be filled. + (Note that the buffer size is always PAGE_SIZE at this time). This module + will in turn request data from the next module and so on down until the + writer is made to read from the stored image. + + Part of definition of the structure of a module thus looks like this: + + int (*rw_init) (int rw, int stream_number); + int (*rw_cleanup) (int rw); + int (*write_chunk) (struct page *buffer_page); + int (*read_chunk) (struct page *buffer_page, int sync); + + It should be noted that the _cleanup routine may be called before the + full stream of data has been read or written. While writing the image, + the user may (depending upon settings) choose to abort suspending, and + if we are in the midst of writing the last portion of the image, a portion + of the second pageset may be reread. This may also happen if an error + occurs and we seek to abort the process of writing the image. + + The modular design is also useful in a number of other ways. It provides + a means where by we can add support for: + + - providing overall initialisation and cleanup routines; + - serialising configuration information in the image header; + - providing debugging information to the user; + - determining memory and image storage requirements; + - dis/enabling components at run-time; + - configuring the module (see below); + + ...and routines for writers specific to their work: + - Parsing a resume= location; + - Determining whether an image exists; + - Marking a resume as having been attempted; + - Invalidating an image; + + Since some parts of the core - the user interface and storage manager + support - have use for some of these functions, they are registered as + 'miscellaneous' modules as well. + + d) Sysfs data structures. + + This brings us naturally to support for configuring TuxOnIce. We desired to + provide a way to make TuxOnIce as flexible and configurable as possible. + The user shouldn't have to reboot just because they want to now hibernate to + a file instead of a partition, for example. + + To accomplish this, TuxOnIce implements a very generic means whereby the + core and modules can register new sysfs entries. All TuxOnIce entries use + a single _store and _show routine, both of which are found in + tuxonice_sysfs.c in the kernel/power directory. These routines handle the + most common operations - getting and setting the values of bits, integers, + longs, unsigned longs and strings in one place, and allow overrides for + customised get and set options as well as side-effect routines for all + reads and writes. + + When combined with some simple macros, a new sysfs entry can then be defined + in just a couple of lines: + + SYSFS_INT("progress_granularity", SYSFS_RW, &progress_granularity, 1, + 2048, 0, NULL), + + This defines a sysfs entry named "progress_granularity" which is rw and + allows the user to access an integer stored at &progress_granularity, giving + it a value between 1 and 2048 inclusive. + + Sysfs entries are registered under /sys/power/tuxonice, and entries for + modules are located in a subdirectory named after the module. + diff --git a/Documentation/power/tuxonice.txt b/Documentation/power/tuxonice.txt new file mode 100644 index 000000000..3bf0575ef --- /dev/null +++ b/Documentation/power/tuxonice.txt @@ -0,0 +1,948 @@ + --- TuxOnIce, version 3.0 --- + +1. What is it? +2. Why would you want it? +3. What do you need to use it? +4. Why not just use the version already in the kernel? +5. How do you use it? +6. What do all those entries in /sys/power/tuxonice do? +7. How do you get support? +8. I think I've found a bug. What should I do? +9. When will XXX be supported? +10 How does it work? +11. Who wrote TuxOnIce? + +1. What is it? + + Imagine you're sitting at your computer, working away. For some reason, you + need to turn off your computer for a while - perhaps it's time to go home + for the day. When you come back to your computer next, you're going to want + to carry on where you left off. Now imagine that you could push a button and + have your computer store the contents of its memory to disk and power down. + Then, when you next start up your computer, it loads that image back into + memory and you can carry on from where you were, just as if you'd never + turned the computer off. You have far less time to start up, no reopening of + applications or finding what directory you put that file in yesterday. + That's what TuxOnIce does. + + TuxOnIce has a long heritage. It began life as work by Gabor Kuti, who, + with some help from Pavel Machek, got an early version going in 1999. The + project was then taken over by Florent Chabaud while still in alpha version + numbers. Nigel Cunningham came on the scene when Florent was unable to + continue, moving the project into betas, then 1.0, 2.0 and so on up to + the present series. During the 2.0 series, the name was contracted to + Suspend2 and the website suspend2.net created. Beginning around July 2007, + a transition to calling the software TuxOnIce was made, to seek to help + make it clear that TuxOnIce is more concerned with hibernation than suspend + to ram. + + Pavel Machek's swsusp code, which was merged around 2.5.17 retains the + original name, and was essentially a fork of the beta code until Rafael + Wysocki came on the scene in 2005 and began to improve it further. + +2. Why would you want it? + + Why wouldn't you want it? + + Being able to save the state of your system and quickly restore it improves + your productivity - you get a useful system in far less time than through + the normal boot process. You also get to be completely 'green', using zero + power, or as close to that as possible (the computer may still provide + minimal power to some devices, so they can initiate a power on, but that + will be the same amount of power as would be used if you told the computer + to shutdown. + +3. What do you need to use it? + + a. Kernel Support. + + i) The TuxOnIce patch. + + TuxOnIce is part of the Linux Kernel. This version is not part of Linus's + 2.6 tree at the moment, so you will need to download the kernel source and + apply the latest patch. Having done that, enable the appropriate options in + make [menu|x]config (under Power Management Options - look for "Enhanced + Hibernation"), compile and install your kernel. TuxOnIce works with SMP, + Highmem, preemption, fuse filesystems, x86-32, PPC and x86_64. + + TuxOnIce patches are available from http://tuxonice.net. + + ii) Compression support. + + Compression support is implemented via the cryptoapi. You will therefore want + to select any Cryptoapi transforms that you want to use on your image from + the Cryptoapi menu while configuring your kernel. We recommend the use of the + LZO compression method - it is very fast and still achieves good compression. + + You can also tell TuxOnIce to write its image to an encrypted and/or + compressed filesystem/swap partition. In that case, you don't need to do + anything special for TuxOnIce when it comes to kernel configuration. + + iii) Configuring other options. + + While you're configuring your kernel, try to configure as much as possible + to build as modules. We recommend this because there are a number of drivers + that are still in the process of implementing proper power management + support. In those cases, the best way to work around their current lack is + to build them as modules and remove the modules while hibernating. You might + also bug the driver authors to get their support up to speed, or even help! + + b. Storage. + + i) Swap. + + TuxOnIce can store the hibernation image in your swap partition, a swap file or + a combination thereof. Whichever combination you choose, you will probably + want to create enough swap space to store the largest image you could have, + plus the space you'd normally use for swap. A good rule of thumb would be + to calculate the amount of swap you'd want without using TuxOnIce, and then + add the amount of memory you have. This swapspace can be arranged in any way + you'd like. It can be in one partition or file, or spread over a number. The + only requirement is that they be active when you start a hibernation cycle. + + There is one exception to this requirement. TuxOnIce has the ability to turn + on one swap file or partition at the start of hibernating and turn it back off + at the end. If you want to ensure you have enough memory to store a image + when your memory is fully used, you might want to make one swap partition or + file for 'normal' use, and another for TuxOnIce to activate & deactivate + automatically. (Further details below). + + ii) Normal files. + + TuxOnIce includes a 'file allocator'. The file allocator can store your + image in a simple file. Since Linux has the concept of everything being a + file, this is more powerful than it initially sounds. If, for example, you + were to set up a network block device file, you could hibernate to a network + server. This has been tested and works to a point, but nbd itself isn't + stateless enough for our purposes. + + Take extra care when setting up the file allocator. If you just type + commands without thinking and then try to hibernate, you could cause + irreversible corruption on your filesystems! Make sure you have backups. + + Most people will only want to hibernate to a local file. To achieve that, do + something along the lines of: + + echo "TuxOnIce" > /hibernation-file + dd if=/dev/zero bs=1M count=512 >> /hibernation-file + + This will create a 512MB file called /hibernation-file. To get TuxOnIce to use + it: + + echo /hibernation-file > /sys/power/tuxonice/file/target + + Then + + cat /sys/power/tuxonice/resume + + Put the results of this into your bootloader's configuration (see also step + C, below): + + ---EXAMPLE-ONLY-DON'T-COPY-AND-PASTE--- + # cat /sys/power/tuxonice/resume + file:/dev/hda2:0x1e001 + + In this example, we would edit the append= line of our lilo.conf|menu.lst + so that it included: + + resume=file:/dev/hda2:0x1e001 + ---EXAMPLE-ONLY-DON'T-COPY-AND-PASTE--- + + For those who are thinking 'Could I make the file sparse?', the answer is + 'No!'. At the moment, there is no way for TuxOnIce to fill in the holes in + a sparse file while hibernating. In the longer term (post merge!), I'd like + to change things so that the file could be dynamically resized and have + holes filled as needed. Right now, however, that's not possible and not a + priority. + + c. Bootloader configuration. + + Using TuxOnIce also requires that you add an extra parameter to + your lilo.conf or equivalent. Here's an example for a swap partition: + + append="resume=swap:/dev/hda1" + + This would tell TuxOnIce that /dev/hda1 is a swap partition you + have. TuxOnIce will use the swap signature of this partition as a + pointer to your data when you hibernate. This means that (in this example) + /dev/hda1 doesn't need to be _the_ swap partition where all of your data + is actually stored. It just needs to be a swap partition that has a + valid signature. + + You don't need to have a swap partition for this purpose. TuxOnIce + can also use a swap file, but usage is a little more complex. Having made + your swap file, turn it on and do + + cat /sys/power/tuxonice/swap/headerlocations + + (this assumes you've already compiled your kernel with TuxOnIce + support and booted it). The results of the cat command will tell you + what you need to put in lilo.conf: + + For swap partitions like /dev/hda1, simply use resume=/dev/hda1. + For swapfile `swapfile`, use resume=swap:/dev/hda2:0x242d. + + If the swapfile changes for any reason (it is moved to a different + location, it is deleted and recreated, or the filesystem is + defragmented) then you will have to check + /sys/power/tuxonice/swap/headerlocations for a new resume_block value. + + Once you've compiled and installed the kernel and adjusted your bootloader + configuration, you should only need to reboot for the most basic part + of TuxOnIce to be ready. + + If you only compile in the swap allocator, or only compile in the file + allocator, you don't need to add the "swap:" part of the resume= + parameters above. resume=/dev/hda2:0x242d will work just as well. If you + have compiled both and your storage is on swap, you can also use this + format (the swap allocator is the default allocator). + + When compiling your kernel, one of the options in the 'Power Management + Support' menu, just above the 'Enhanced Hibernation (TuxOnIce)' entry is + called 'Default resume partition'. This can be used to set a default value + for the resume= parameter. + + d. The hibernate script. + + Since the driver model in 2.6 kernels is still being developed, you may need + to do more than just configure TuxOnIce. Users of TuxOnIce usually start the + process via a script which prepares for the hibernation cycle, tells the + kernel to do its stuff and then restore things afterwards. This script might + involve: + + - Switching to a text console and back if X doesn't like the video card + status on resume. + - Un/reloading drivers that don't play well with hibernation. + + Note that you might not be able to unload some drivers if there are + processes using them. You might have to kill off processes that hold + devices open. Hint: if your X server accesses an USB mouse, doing a + 'chvt' to a text console releases the device and you can unload the + module. + + Check out the latest script (available on tuxonice.net). + + e. The userspace user interface. + + TuxOnIce has very limited support for displaying status if you only apply + the kernel patch - it can printk messages, but that is all. In addition, + some of the functions mentioned in this document (such as cancelling a cycle + or performing interactive debugging) are unavailable. To utilise these + functions, or simply get a nice display, you need the 'userui' component. + Userui comes in three flavours, usplash, fbsplash and text. Text should + work on any console. Usplash and fbsplash require the appropriate + (distro specific?) support. + + To utilise a userui, TuxOnIce just needs to be told where to find the + userspace binary: + + echo "/usr/local/sbin/tuxoniceui_fbsplash" > /sys/power/tuxonice/user_interface/program + + The hibernate script can do this for you, and a default value for this + setting can be configured when compiling the kernel. This path is also + stored in the image header, so if you have an initrd or initramfs, you can + use the userui during the first part of resuming (prior to the atomic + restore) by putting the binary in the same path in your initrd/ramfs. + Alternatively, you can put it in a different location and do an echo + similar to the above prior to the echo > do_resume. The value saved in the + image header will then be ignored. + +4. Why not just use the version already in the kernel? + + The version in the vanilla kernel has a number of drawbacks. The most + serious of these are: + - it has a maximum image size of 1/2 total memory; + - it doesn't allocate storage until after it has snapshotted memory. + This means that you can't be sure hibernating will work until you + see it start to write the image; + - it does not allow you to press escape to cancel a cycle; + - it does not allow you to press escape to cancel resuming; + - it does not allow you to automatically swapon a file when + starting a cycle; + - it does not allow you to use multiple swap partitions or files; + - it does not allow you to use ordinary files; + - it just invalidates an image and continues to boot if you + accidentally boot the wrong kernel after hibernating; + - it doesn't support any sort of nice display while hibernating; + - it is moving toward requiring that you have an initrd/initramfs + to ever have a hope of resuming (uswsusp). While uswsusp will + address some of the concerns above, it won't address all of them, + and will be more complicated to get set up; + - it doesn't have support for suspend-to-both (write a hibernation + image, then suspend to ram; I think this is known as ReadySafe + under M$). + +5. How do you use it? + + A hibernation cycle can be started directly by doing: + + echo > /sys/power/tuxonice/do_hibernate + + In practice, though, you'll probably want to use the hibernate script + to unload modules, configure the kernel the way you like it and so on. + In that case, you'd do (as root): + + hibernate + + See the hibernate script's man page for more details on the options it + takes. + + If you're using the text or splash user interface modules, one feature of + TuxOnIce that you might find useful is that you can press Escape at any time + during hibernating, and the process will be aborted. + + Due to the way hibernation works, this means you'll have your system back and + perfectly usable almost instantly. The only exception is when it's at the + very end of writing the image. Then it will need to reload a small (usually + 4-50MBs, depending upon the image characteristics) portion first. + + Likewise, when resuming, you can press escape and resuming will be aborted. + The computer will then powerdown again according to settings at that time for + the powerdown method or rebooting. + + You can change the settings for powering down while the image is being + written by pressing 'R' to toggle rebooting and 'O' to toggle between + suspending to ram and powering down completely). + + If you run into problems with resuming, adding the "noresume" option to + the kernel command line will let you skip the resume step and recover your + system. This option shouldn't normally be needed, because TuxOnIce modifies + the image header prior to the atomic restore, and will thus prompt you + if it detects that you've tried to resume an image before (this flag is + removed if you press Escape to cancel a resume, so you won't be prompted + then). + + Recent kernels (2.6.24 onwards) add support for resuming from a different + kernel to the one that was hibernated (thanks to Rafael for his work on + this - I've just embraced and enhanced the support for TuxOnIce). This + should further reduce the need for you to use the noresume option. + +6. What do all those entries in /sys/power/tuxonice do? + + /sys/power/tuxonice is the directory which contains files you can use to + tune and configure TuxOnIce to your liking. The exact contents of + the directory will depend upon the version of TuxOnIce you're + running and the options you selected at compile time. In the following + descriptions, names in brackets refer to compile time options. + (Note that they're all dependant upon you having selected CONFIG_TUXONICE + in the first place!). + + Since the values of these settings can open potential security risks, the + writeable ones are accessible only to the root user. You may want to + configure sudo to allow you to invoke your hibernate script as an ordinary + user. + + - alloc/failure_test + + This debugging option provides a way of testing TuxOnIce's handling of + memory allocation failures. Each allocation type that TuxOnIce makes has + been given a unique number (see the source code). Echo the appropriate + number into this entry, and when TuxOnIce attempts to do that allocation, + it will pretend there was a failure and act accordingly. + + - alloc/find_max_mem_allocated + + This debugging option will cause TuxOnIce to find the maximum amount of + memory it used during a cycle, and report that information in debugging + information at the end of the cycle. + + - alt_resume_param + + Instead of powering down after writing a hibernation image, TuxOnIce + supports resuming from a different image. This entry lets you set the + location of the signature for that image (the resume= value you'd use + for it). Using an alternate image and keep_image mode, you can do things + like using an alternate image to power down an uninterruptible power + supply. + + - block_io/target_outstanding_io + + This value controls the amount of memory that the block I/O code says it + needs when the core code is calculating how much memory is needed for + hibernating and for resuming. It doesn't directly control the amount of + I/O that is submitted at any one time - that depends on the amount of + available memory (we may have more available than we asked for), the + throughput that is being achieved and the ability of the CPU to keep up + with disk throughput (particularly where we're compressing pages). + + - checksum/enabled + + Use cryptoapi hashing routines to verify that Pageset2 pages don't change + while we're saving the first part of the image, and to get any pages that + do change resaved in the atomic copy. This should normally not be needed, + but if you're seeing issues, please enable this. If your issues stop you + being able to resume, enable this option, hibernate and cancel the cycle + after the atomic copy is done. If the debugging info shows a non-zero + number of pages resaved, please report this to Nigel. + + - compression/algorithm + + Set the cryptoapi algorithm used for compressing the image. + + - compression/expected_compression + + These values allow you to set an expected compression ratio, which TuxOnice + will use in calculating whether it meets constraints on the image size. If + this expected compression ratio is not attained, the hibernation cycle will + abort, so it is wise to allow some spare. You can see what compression + ratio is achieved in the logs after hibernating. + + - debug_info: + + This file returns information about your configuration that may be helpful + in diagnosing problems with hibernating. + + - did_suspend_to_both: + + This file can be used when you hibernate with powerdown method 3 (ie suspend + to ram after writing the image). There can be two outcomes in this case. We + can resume from the suspend-to-ram before the battery runs out, or we can run + out of juice and and up resuming like normal. This entry lets you find out, + post resume, which way we went. If the value is 1, we resumed from suspend + to ram. This can be useful when actions need to be run post suspend-to-ram + that don't need to be run if we did the normal resume from power off. + + - do_hibernate: + + When anything is written to this file, the kernel side of TuxOnIce will + begin to attempt to write an image to disk and power down. You'll normally + want to run the hibernate script instead, to get modules unloaded first. + + - do_resume: + + When anything is written to this file TuxOnIce will attempt to read and + restore an image. If there is no image, it will return almost immediately. + If an image exists, the echo > will never return. Instead, the original + kernel context will be restored and the original echo > do_hibernate will + return. + + - */enabled + + These option can be used to temporarily disable various parts of TuxOnIce. + + - extra_pages_allowance + + When TuxOnIce does its atomic copy, it calls the driver model suspend + and resume methods. If you have DRI enabled with a driver such as fglrx, + this can result in the driver allocating a substantial amount of memory + for storing its state. Extra_pages_allowance tells TuxOnIce how much + extra memory it should ensure is available for those allocations. If + your attempts at hibernating end with a message in dmesg indicating that + insufficient extra pages were allowed, you need to increase this value. + + - file/target: + + Read this value to get the current setting. Write to it to point TuxOnice + at a new storage location for the file allocator. See section 3.b.ii above + for details of how to set up the file allocator. + + - freezer_test + + This entry can be used to get TuxOnIce to just test the freezer and prepare + an image without actually doing a hibernation cycle. It is useful for + diagnosing freezing and image preparation issues. + + - full_pageset2 + + TuxOnIce divides the pages that are stored in an image into two sets. The + difference between the two sets is that pages in pageset 1 are atomically + copied, and pages in pageset 2 are written to disk without being copied + first. A page CAN be written to disk without being copied first if and only + if its contents will not be modified or used at any time after userspace + processes are frozen. A page MUST be in pageset 1 if its contents are + modified or used at any time after userspace processes have been frozen. + + Normally (ie if this option is enabled), TuxOnIce will put all pages on the + per-zone LRUs in pageset2, then remove those pages used by any userspace + user interface helper and TuxOnIce storage manager that are running, + together with pages used by the GEM memory manager introduced around 2.6.28 + kernels. + + If this option is disabled, a much more conservative approach will be taken. + The only pages in pageset2 will be those belonging to userspace processes, + with the exclusion of those belonging to the TuxOnIce userspace helpers + mentioned above. This will result in a much smaller pageset2, and will + therefore result in smaller images than are possible with this option + enabled. + + - ignore_rootfs + + TuxOnIce records which device is mounted as the root filesystem when + writing the hibernation image. It will normally check at resume time that + this device isn't already mounted - that would be a cause of filesystem + corruption. In some particular cases (RAM based root filesystems), you + might want to disable this check. This option allows you to do that. + + - image_exists: + + Can be used in a script to determine whether a valid image exists at the + location currently pointed to by resume=. Returns up to three lines. + The first is whether an image exists (-1 for unsure, otherwise 0 or 1). + If an image eixsts, additional lines will return the machine and version. + Echoing anything to this entry removes any current image. + + - image_size_limit: + + The maximum size of hibernation image written to disk, measured in megabytes + (1024*1024). + + - last_result: + + The result of the last hibernation cycle, as defined in + include/linux/suspend-debug.h with the values SUSPEND_ABORTED to + SUSPEND_KEPT_IMAGE. This is a bitmask. + + - late_cpu_hotplug: + + This sysfs entry controls whether cpu hotplugging is done - as normal - just + before (unplug) and after (replug) the atomic copy/restore (so that all + CPUs/cores are available for multithreaded I/O). The alternative is to + unplug all secondary CPUs/cores at the start of hibernating/resuming, and + replug them at the end of resuming. No multithreaded I/O will be possible in + this configuration, but the odd machine has been reported to require it. + + - lid_file: + + This determines which ACPI button file we look in to determine whether the + lid is open or closed after resuming from suspend to disk or power off. + If the entry is set to "lid/LID", we'll open /proc/acpi/button/lid/LID/state + and check its contents at the appropriate moment. See post_wake_state below + for more details on how this entry is used. + + - log_everything (CONFIG_PM_DEBUG): + + Setting this option results in all messages printed being logged. Normally, + only a subset are logged, so as to not slow the process and not clutter the + logs. Useful for debugging. It can be toggled during a cycle by pressing + 'L'. + + - no_load_direct: + + This is a debugging option. If, when loading the atomically copied pages of + an image, TuxOnIce finds that the destination address for a page is free, + it will normally allocate the image, load the data directly into that + address and skip it in the atomic restore. If this option is disabled, the + page will be loaded somewhere else and atomically restored like other pages. + + - no_flusher_thread: + + When doing multithreaded I/O (see below), the first online CPU can be used + to _just_ submit compressed pages when writing the image, rather than + compressing and submitting data. This option is normally disabled, but has + been included because Nigel would like to see whether it will be more useful + as the number of cores/cpus in computers increases. + + - no_multithreaded_io: + + TuxOnIce will normally create one thread per cpu/core on your computer, + each of which will then perform I/O. This will generally result in + throughput that's the maximum the storage medium can handle. There + shouldn't be any reason to disable multithreaded I/O now, but this option + has been retained for debugging purposes. + + - no_pageset2 + + See the entry for full_pageset2 above for an explanation of pagesets. + Enabling this option causes TuxOnIce to do an atomic copy of all pages, + thereby limiting the maximum image size to 1/2 of memory, as swsusp does. + + - no_pageset2_if_unneeded + + See the entry for full_pageset2 above for an explanation of pagesets. + Enabling this option causes TuxOnIce to act like no_pageset2 was enabled + if and only it isn't needed anyway. This option may still make TuxOnIce + less reliable because pageset2 pages are normally used to store the + atomic copy - drivers that want to do allocations of larger amounts of + memory in one shot will be more likely to find that those amounts aren't + available if this option is enabled. + + - pause_between_steps (CONFIG_PM_DEBUG): + + This option is used during debugging, to make TuxOnIce pause between + each step of the process. It is ignored when the nice display is on. + + - post_wake_state: + + TuxOnIce provides support for automatically waking after a user-selected + delay, and using a different powerdown method if the lid is still closed. + (Yes, we're assuming a laptop). This entry lets you choose what state + should be entered next. The values are those described under + powerdown_method, below. It can be used to suspend to RAM after hibernating, + then powerdown properly (say) 20 minutes. It can also be used to power down + properly, then wake at (say) 6.30am and suspend to RAM until you're ready + to use the machine. + + - powerdown_method: + + Used to select a method by which TuxOnIce should powerdown after writing the + image. Currently: + + 0: Don't use ACPI to power off. + 3: Attempt to enter Suspend-to-ram. + 4: Attempt to enter ACPI S4 mode. + 5: Attempt to power down via ACPI S5 mode. + + Note that these options are highly dependant upon your hardware & software: + + 3: When succesful, your machine suspends to ram instead of powering off. + The advantage of using this mode is that it doesn't matter whether your + battery has enough charge to make it through to your next resume. If it + lasts, you will simply resume from suspend to ram (and the image on disk + will be discarded). If the battery runs out, you will resume from disk + instead. The disadvantage is that it takes longer than a normal + suspend-to-ram to enter the state, since the suspend-to-disk image needs + to be written first. + 4/5: When successful, your machine will be off and comsume (almost) no power. + But it might still react to some external events like opening the lid or + trafic on a network or usb device. For the bios, resume is then the same + as warm boot, similar to a situation where you used the command `reboot' + to reboot your machine. If your machine has problems on warm boot or if + you want to protect your machine with the bios password, this is probably + not the right choice. Mode 4 may be necessary on some machines where ACPI + wake up methods need to be run to properly reinitialise hardware after a + hibernation cycle. + 0: Switch the machine completely off. The only possible wakeup is the power + button. For the bios, resume is then the same as a cold boot, in + particular you would have to provide your bios boot password if your + machine uses that feature for booting. + + - progressbar_granularity_limit: + + This option can be used to limit the granularity of the progress bar + displayed with a bootsplash screen. The value is the maximum number of + steps. That is, 10 will make the progress bar jump in 10% increments. + + - reboot: + + This option causes TuxOnIce to reboot rather than powering down + at the end of saving an image. It can be toggled during a cycle by pressing + 'R'. + + - resume: + + This sysfs entry can be used to read and set the location in which TuxOnIce + will look for the signature of an image - the value set using resume= at + boot time or CONFIG_PM_STD_PARTITION ("Default resume partition"). By + writing to this file as well as modifying your bootloader's configuration + file (eg menu.lst), you can set or reset the location of your image or the + method of storing the image without rebooting. + + - replace_swsusp (CONFIG_TOI_REPLACE_SWSUSP): + + This option makes + + echo disk > /sys/power/state + + activate TuxOnIce instead of swsusp. Regardless of whether this option is + enabled, any invocation of swsusp's resume time trigger will cause TuxOnIce + to check for an image too. This is due to the fact that at resume time, we + can't know whether this option was enabled until we see if an image is there + for us to resume from. (And when an image exists, we don't care whether we + did replace swsusp anyway - we just want to resume). + + - resume_commandline: + + This entry can be read after resuming to see the commandline that was used + when resuming began. You might use this to set up two bootloader entries + that are the same apart from the fact that one includes a extra append= + argument "at_work=1". You could then grep resume_commandline in your + post-resume scripts and configure networking (for example) differently + depending upon whether you're at home or work. resume_commandline can be + set to arbitrary text if you wish to remove sensitive contents. + + - swap/swapfilename: + + This entry is used to specify the swapfile or partition that + TuxOnIce will attempt to swapon/swapoff automatically. Thus, if + I normally use /dev/hda1 for swap, and want to use /dev/hda2 for specifically + for my hibernation image, I would + + echo /dev/hda2 > /sys/power/tuxonice/swap/swapfile + + /dev/hda2 would then be automatically swapon'd and swapoff'd. Note that the + swapon and swapoff occur while other processes are frozen (including kswapd) + so this swap file will not be used up when attempting to free memory. The + parition/file is also given the highest priority, so other swapfiles/partitions + will only be used to save the image when this one is filled. + + The value of this file is used by headerlocations along with any currently + activated swapfiles/partitions. + + - swap/headerlocations: + + This option tells you the resume= options to use for swap devices you + currently have activated. It is particularly useful when you only want to + use a swap file to store your image. See above for further details. + + - test_bio + + This is a debugging option. When enabled, TuxOnIce will not hibernate. + Instead, when asked to write an image, it will skip the atomic copy, + just doing the writing of the image and then returning control to the + user at the point where it would have powered off. This is useful for + testing throughput in different configurations. + + - test_filter_speed + + This is a debugging option. When enabled, TuxOnIce will not hibernate. + Instead, when asked to write an image, it will not write anything or do + an atomic copy, but will only run any enabled compression algorithm on the + data that would have been written (the source pages of the atomic copy in + the case of pageset 1). This is useful for comparing the performance of + compression algorithms and for determining the extent to which an upgrade + to your storage method would improve hibernation speed. + + - user_interface/debug_sections (CONFIG_PM_DEBUG): + + This value, together with the console log level, controls what debugging + information is displayed. The console log level determines the level of + detail, and this value determines what detail is displayed. This value is + a bit vector, and the meaning of the bits can be found in the kernel tree + in include/linux/tuxonice.h. It can be overridden using the kernel's + command line option suspend_dbg. + + - user_interface/default_console_level (CONFIG_PM_DEBUG): + + This determines the value of the console log level at the start of a + hibernation cycle. If debugging is compiled in, the console log level can be + changed during a cycle by pressing the digit keys. Meanings are: + + 0: Nice display. + 1: Nice display plus numerical progress. + 2: Errors only. + 3: Low level debugging info. + 4: Medium level debugging info. + 5: High level debugging info. + 6: Verbose debugging info. + + - user_interface/enable_escape: + + Setting this to "1" will enable you abort a hibernation cycle or resuming by + pressing escape, "0" (default) disables this feature. Note that enabling + this option means that you cannot initiate a hibernation cycle and then walk + away from your computer, expecting it to be secure. With feature disabled, + you can validly have this expectation once TuxOnice begins to write the + image to disk. (Prior to this point, it is possible that TuxOnice might + about because of failure to freeze all processes or because constraints + on its ability to save the image are not met). + + - user_interface/program + + This entry is used to tell TuxOnice what userspace program to use for + providing a user interface while hibernating. The program uses a netlink + socket to pass messages back and forward to the kernel, allowing all of the + functions formerly implemented in the kernel user interface components. + + - version: + + The version of TuxOnIce you have compiled into the currently running kernel. + + - wake_alarm_dir: + + As mentioned above (post_wake_state), TuxOnIce supports automatically waking + after some delay. This entry allows you to select which wake alarm to use. + It should contain the value "rtc0" if you're wanting to use + /sys/class/rtc/rtc0. + + - wake_delay: + + This value determines the delay from the end of writing the image until the + wake alarm is triggered. You can set an absolute time by writing the desired + time into /sys/class/rtc//wakealarm and leaving these values + empty. + + Note that for the wakeup to actually occur, you may need to modify entries + in /proc/acpi/wakeup. This is done by echoing the name of the button in the + first column (eg PBTN) into the file. + +7. How do you get support? + + Glad you asked. TuxOnIce is being actively maintained and supported + by Nigel (the guy doing most of the kernel coding at the moment), Bernard + (who maintains the hibernate script and userspace user interface components) + and its users. + + Resources availble include HowTos, FAQs and a Wiki, all available via + tuxonice.net. You can find the mailing lists there. + +8. I think I've found a bug. What should I do? + + By far and a way, the most common problems people have with TuxOnIce + related to drivers not having adequate power management support. In this + case, it is not a bug with TuxOnIce, but we can still help you. As we + mentioned above, such issues can usually be worked around by building the + functionality as modules and unloading them while hibernating. Please visit + the Wiki for up-to-date lists of known issues and work arounds. + + If this information doesn't help, try running: + + hibernate --bug-report + + ..and sending the output to the users mailing list. + + Good information on how to provide us with useful information from an + oops is found in the file REPORTING-BUGS, in the top level directory + of the kernel tree. If you get an oops, please especially note the + information about running what is printed on the screen through ksymoops. + The raw information is useless. + +9. When will XXX be supported? + + If there's a feature missing from TuxOnIce that you'd like, feel free to + ask. We try to be obliging, within reason. + + Patches are welcome. Please send to the list. + +10. How does it work? + + TuxOnIce does its work in a number of steps. + + a. Freezing system activity. + + The first main stage in hibernating is to stop all other activity. This is + achieved in stages. Processes are considered in fours groups, which we will + describe in reverse order for clarity's sake: Threads with the PF_NOFREEZE + flag, kernel threads without this flag, userspace processes with the + PF_SYNCTHREAD flag and all other processes. The first set (PF_NOFREEZE) are + untouched by the refrigerator code. They are allowed to run during hibernating + and resuming, and are used to support user interaction, storage access or the + like. Other kernel threads (those unneeded while hibernating) are frozen last. + This leaves us with userspace processes that need to be frozen. When a + process enters one of the *_sync system calls, we set a PF_SYNCTHREAD flag on + that process for the duration of that call. Processes that have this flag are + frozen after processes without it, so that we can seek to ensure that dirty + data is synced to disk as quickly as possible in a situation where other + processes may be submitting writes at the same time. Freezing the processes + that are submitting data stops new I/O from being submitted. Syncthreads can + then cleanly finish their work. So the order is: + + - Userspace processes without PF_SYNCTHREAD or PF_NOFREEZE; + - Userspace processes with PF_SYNCTHREAD (they won't have NOFREEZE); + - Kernel processes without PF_NOFREEZE. + + b. Eating memory. + + For a successful hibernation cycle, you need to have enough disk space to store the + image and enough memory for the various limitations of TuxOnIce's + algorithm. You can also specify a maximum image size. In order to attain + to those constraints, TuxOnIce may 'eat' memory. If, after freezing + processes, the constraints aren't met, TuxOnIce will thaw all the + other processes and begin to eat memory until its calculations indicate + the constraints are met. It will then freeze processes again and recheck + its calculations. + + c. Allocation of storage. + + Next, TuxOnIce allocates the storage that will be used to save + the image. + + The core of TuxOnIce knows nothing about how or where pages are stored. We + therefore request the active allocator (remember you might have compiled in + more than one!) to allocate enough storage for our expect image size. If + this request cannot be fulfilled, we eat more memory and try again. If it + is fulfiled, we seek to allocate additional storage, just in case our + expected compression ratio (if any) isn't achieved. This time, however, we + just continue if we can't allocate enough storage. + + If these calls to our allocator change the characteristics of the image + such that we haven't allocated enough memory, we also loop. (The allocator + may well need to allocate space for its storage information). + + d. Write the first part of the image. + + TuxOnIce stores the image in two sets of pages called 'pagesets'. + Pageset 2 contains pages on the active and inactive lists; essentially + the page cache. Pageset 1 contains all other pages, including the kernel. + We use two pagesets for one important reason: We need to make an atomic copy + of the kernel to ensure consistency of the image. Without a second pageset, + that would limit us to an image that was at most half the amount of memory + available. Using two pagesets allows us to store a full image. Since pageset + 2 pages won't be needed in saving pageset 1, we first save pageset 2 pages. + We can then make our atomic copy of the remaining pages using both pageset 2 + pages and any other pages that are free. While saving both pagesets, we are + careful not to corrupt the image. Among other things, we use lowlevel block + I/O routines that don't change the pagecache contents. + + The next step, then, is writing pageset 2. + + e. Suspending drivers and storing processor context. + + Having written pageset2, TuxOnIce calls the power management functions to + notify drivers of the hibernation, and saves the processor state in preparation + for the atomic copy of memory we are about to make. + + f. Atomic copy. + + At this stage, everything else but the TuxOnIce code is halted. Processes + are frozen or idling, drivers are quiesced and have stored (ideally and where + necessary) their configuration in memory we are about to atomically copy. + In our lowlevel architecture specific code, we have saved the CPU state. + We can therefore now do our atomic copy before resuming drivers etc. + + g. Save the atomic copy (pageset 1). + + TuxOnice can then write the atomic copy of the remaining pages. Since we + have copied the pages into other locations, we can continue to use the + normal block I/O routines without fear of corruption our image. + + f. Save the image header. + + Nearly there! We save our settings and other parameters needed for + reloading pageset 1 in an 'image header'. We also tell our allocator to + serialise its data at this stage, so that it can reread the image at resume + time. + + g. Set the image header. + + Finally, we edit the header at our resume= location. The signature is + changed by the allocator to reflect the fact that an image exists, and to + point to the start of that data if necessary (swap allocator). + + h. Power down. + + Or reboot if we're debugging and the appropriate option is selected. + + Whew! + + Reloading the image. + -------------------- + + Reloading the image is essentially the reverse of all the above. We load + our copy of pageset 1, being careful to choose locations that aren't going + to be overwritten as we copy it back (We start very early in the boot + process, so there are no other processes to quiesce here). We then copy + pageset 1 back to its original location in memory and restore the process + context. We are now running with the original kernel. Next, we reload the + pageset 2 pages, free the memory and swap used by TuxOnIce, restore + the pageset header and restart processes. Sounds easy in comparison to + hibernating, doesn't it! + + There is of course more to TuxOnIce than this, but this explanation + should be a good start. If there's interest, I'll write further + documentation on range pages and the low level I/O. + +11. Who wrote TuxOnIce? + + (Answer based on the writings of Florent Chabaud, credits in files and + Nigel's limited knowledge; apologies to anyone missed out!) + + The main developers of TuxOnIce have been... + + Gabor Kuti + Pavel Machek + Florent Chabaud + Bernard Blackham + Nigel Cunningham + + Significant portions of swsusp, the code in the vanilla kernel which + TuxOnIce enhances, have been worked on by Rafael Wysocki. Thanks should + also be expressed to him. + + The above mentioned developers have been aided in their efforts by a host + of hundreds, if not thousands of testers and people who have submitted bug + fixes & suggestions. Of special note are the efforts of Michael Frank, who + had his computers repetitively hibernate and resume for literally tens of + thousands of cycles and developed scripts to stress the system and test + TuxOnIce far beyond the point most of us (Nigel included!) would consider + testing. His efforts have contributed as much to TuxOnIce as any of the + names above. -- cgit v1.2.3