From e5fd91f1ef340da553f7a79da9540c3db711c937 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Tue, 8 Sep 2015 01:01:14 -0300 Subject: Linux-libre 4.2-gnu --- arch/arc/kernel/irq.c | 210 -------------------------------------------------- 1 file changed, 210 deletions(-) (limited to 'arch/arc/kernel/irq.c') diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index 620ec2fe3..2989a7bcf 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -8,115 +8,9 @@ */ #include -#include -#include -#include #include -#include "../../drivers/irqchip/irqchip.h" -#include -#include #include -/* - * Early Hardware specific Interrupt setup - * -Platform independent, needed for each CPU (not foldable into init_IRQ) - * -Called very early (start_kernel -> setup_arch -> setup_processor) - * - * what it does ? - * -Optionally, setup the High priority Interrupts as Level 2 IRQs - */ -void arc_init_IRQ(void) -{ - int level_mask = 0; - - /* setup any high priority Interrupts (Level2 in ARCompact jargon) */ - level_mask |= IS_ENABLED(CONFIG_ARC_IRQ3_LV2) << 3; - level_mask |= IS_ENABLED(CONFIG_ARC_IRQ5_LV2) << 5; - level_mask |= IS_ENABLED(CONFIG_ARC_IRQ6_LV2) << 6; - - /* - * Write to register, even if no LV2 IRQs configured to reset it - * in case bootloader had mucked with it - */ - write_aux_reg(AUX_IRQ_LEV, level_mask); - - if (level_mask) - pr_info("Level-2 interrupts bitset %x\n", level_mask); -} - -/* - * ARC700 core includes a simple on-chip intc supporting - * -per IRQ enable/disable - * -2 levels of interrupts (high/low) - * -all interrupts being level triggered - * - * To reduce platform code, we assume all IRQs directly hooked-up into intc. - * Platforms with external intc, hence cascaded IRQs, are free to over-ride - * below, per IRQ. - */ - -static void arc_irq_mask(struct irq_data *data) -{ - unsigned int ienb; - - ienb = read_aux_reg(AUX_IENABLE); - ienb &= ~(1 << data->irq); - write_aux_reg(AUX_IENABLE, ienb); -} - -static void arc_irq_unmask(struct irq_data *data) -{ - unsigned int ienb; - - ienb = read_aux_reg(AUX_IENABLE); - ienb |= (1 << data->irq); - write_aux_reg(AUX_IENABLE, ienb); -} - -static struct irq_chip onchip_intc = { - .name = "ARC In-core Intc", - .irq_mask = arc_irq_mask, - .irq_unmask = arc_irq_unmask, -}; - -static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hw) -{ - if (irq == TIMER0_IRQ) - irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq); - else - irq_set_chip_and_handler(irq, &onchip_intc, handle_level_irq); - - return 0; -} - -static const struct irq_domain_ops arc_intc_domain_ops = { - .xlate = irq_domain_xlate_onecell, - .map = arc_intc_domain_map, -}; - -static struct irq_domain *root_domain; - -static int __init -init_onchip_IRQ(struct device_node *intc, struct device_node *parent) -{ - if (parent) - panic("DeviceTree incore intc not a root irq controller\n"); - - root_domain = irq_domain_add_legacy(intc, NR_CPU_IRQS, 0, 0, - &arc_intc_domain_ops, NULL); - - if (!root_domain) - panic("root irq domain not avail\n"); - - /* with this we don't need to export root_domain */ - irq_set_default_host(root_domain); - - return 0; -} - -IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ); - /* * Late Interrupt system init called from start_kernel for Boot CPU only * @@ -178,107 +72,3 @@ void arc_request_percpu_irq(int irq, int cpu, enable_percpu_irq(irq, 0); } - -/* - * arch_local_irq_enable - Enable interrupts. - * - * 1. Explicitly called to re-enable interrupts - * 2. Implicitly called from spin_unlock_irq, write_unlock_irq etc - * which maybe in hard ISR itself - * - * Semantics of this function change depending on where it is called from: - * - * -If called from hard-ISR, it must not invert interrupt priorities - * e.g. suppose TIMER is high priority (Level 2) IRQ - * Time hard-ISR, timer_interrupt( ) calls spin_unlock_irq several times. - * Here local_irq_enable( ) shd not re-enable lower priority interrupts - * -If called from soft-ISR, it must re-enable all interrupts - * soft ISR are low prioity jobs which can be very slow, thus all IRQs - * must be enabled while they run. - * Now hardware context wise we may still be in L2 ISR (not done rtie) - * still we must re-enable both L1 and L2 IRQs - * Another twist is prev scenario with flow being - * L1 ISR ==> interrupted by L2 ISR ==> L2 soft ISR - * here we must not re-enable Ll as prev Ll Interrupt's h/w context will get - * over-written (this is deficiency in ARC700 Interrupt mechanism) - */ - -#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS /* Complex version for 2 IRQ levels */ - -void arch_local_irq_enable(void) -{ - - unsigned long flags; - flags = arch_local_save_flags(); - - /* Allow both L1 and L2 at the onset */ - flags |= (STATUS_E1_MASK | STATUS_E2_MASK); - - /* Called from hard ISR (between irq_enter and irq_exit) */ - if (in_irq()) { - - /* If in L2 ISR, don't re-enable any further IRQs as this can - * cause IRQ priorities to get upside down. e.g. it could allow - * L1 be taken while in L2 hard ISR which is wrong not only in - * theory, it can also cause the dreaded L1-L2-L1 scenario - */ - if (flags & STATUS_A2_MASK) - flags &= ~(STATUS_E1_MASK | STATUS_E2_MASK); - - /* Even if in L1 ISR, allowe Higher prio L2 IRQs */ - else if (flags & STATUS_A1_MASK) - flags &= ~(STATUS_E1_MASK); - } - - /* called from soft IRQ, ideally we want to re-enable all levels */ - - else if (in_softirq()) { - - /* However if this is case of L1 interrupted by L2, - * re-enabling both may cause whaco L1-L2-L1 scenario - * because ARC700 allows level 1 to interrupt an active L2 ISR - * Thus we disable both - * However some code, executing in soft ISR wants some IRQs - * to be enabled so we re-enable L2 only - * - * How do we determine L1 intr by L2 - * -A2 is set (means in L2 ISR) - * -E1 is set in this ISR's pt_regs->status32 which is - * saved copy of status32_l2 when l2 ISR happened - */ - struct pt_regs *pt = get_irq_regs(); - if ((flags & STATUS_A2_MASK) && pt && - (pt->status32 & STATUS_A1_MASK)) { - /*flags &= ~(STATUS_E1_MASK | STATUS_E2_MASK); */ - flags &= ~(STATUS_E1_MASK); - } - } - - arch_local_irq_restore(flags); -} - -#else /* ! CONFIG_ARC_COMPACT_IRQ_LEVELS */ - -/* - * Simpler version for only 1 level of interrupt - * Here we only Worry about Level 1 Bits - */ -void arch_local_irq_enable(void) -{ - unsigned long flags; - - /* - * ARC IDE Drivers tries to re-enable interrupts from hard-isr - * context which is simply wrong - */ - if (in_irq()) { - WARN_ONCE(1, "IRQ enabled from hard-isr"); - return; - } - - flags = arch_local_save_flags(); - flags |= (STATUS_E1_MASK | STATUS_E2_MASK); - arch_local_irq_restore(flags); -} -#endif -EXPORT_SYMBOL(arch_local_irq_enable); -- cgit v1.2.3-54-g00ecf