From e5fd91f1ef340da553f7a79da9540c3db711c937 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Tue, 8 Sep 2015 01:01:14 -0300 Subject: Linux-libre 4.2-gnu --- arch/arc/mm/cache_arc700.c | 723 --------------------------------------------- 1 file changed, 723 deletions(-) delete mode 100644 arch/arc/mm/cache_arc700.c (limited to 'arch/arc/mm/cache_arc700.c') diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c deleted file mode 100644 index 12b2100db..000000000 --- a/arch/arc/mm/cache_arc700.c +++ /dev/null @@ -1,723 +0,0 @@ -/* - * ARC700 VIPT Cache Management - * - * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * vineetg: May 2011: for Non-aliasing VIPT D-cache following can be NOPs - * -flush_cache_dup_mm (fork) - * -likewise for flush_cache_mm (exit/execve) - * -likewise for flush_cache_range,flush_cache_page (munmap, exit, COW-break) - * - * vineetg: Apr 2011 - * -Now that MMU can support larger pg sz (16K), the determiniation of - * aliasing shd not be based on assumption of 8k pg - * - * vineetg: Mar 2011 - * -optimised version of flush_icache_range( ) for making I/D coherent - * when vaddr is available (agnostic of num of aliases) - * - * vineetg: Mar 2011 - * -Added documentation about I-cache aliasing on ARC700 and the way it - * was handled up until MMU V2. - * -Spotted a three year old bug when killing the 4 aliases, which needs - * bottom 2 bits, so we need to do paddr | {0x00, 0x01, 0x02, 0x03} - * instead of paddr | {0x00, 0x01, 0x10, 0x11} - * (Rajesh you owe me one now) - * - * vineetg: Dec 2010 - * -Off-by-one error when computing num_of_lines to flush - * This broke signal handling with bionic which uses synthetic sigret stub - * - * vineetg: Mar 2010 - * -GCC can't generate ZOL for core cache flush loops. - * Conv them into iterations based as opposed to while (start < end) types - * - * Vineetg: July 2009 - * -In I-cache flush routine we used to chk for aliasing for every line INV. - * Instead now we setup routines per cache geometry and invoke them - * via function pointers. - * - * Vineetg: Jan 2009 - * -Cache Line flush routines used to flush an extra line beyond end addr - * because check was while (end >= start) instead of (end > start) - * =Some call sites had to work around by doing -1, -4 etc to end param - * =Some callers didnt care. This was spec bad in case of INV routines - * which would discard valid data (cause of the horrible ext2 bug - * in ARC IDE driver) - * - * vineetg: June 11th 2008: Fixed flush_icache_range( ) - * -Since ARC700 caches are not coherent (I$ doesnt snoop D$) both need - * to be flushed, which it was not doing. - * -load_module( ) passes vmalloc addr (Kernel Virtual Addr) to the API, - * however ARC cache maintenance OPs require PHY addr. Thus need to do - * vmalloc_to_phy. - * -Also added optimisation there, that for range > PAGE SIZE we flush the - * entire cache in one shot rather than line by line. For e.g. a module - * with Code sz 600k, old code flushed 600k worth of cache (line-by-line), - * while cache is only 16 or 32k. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -char *arc_cache_mumbojumbo(int c, char *buf, int len) -{ - int n = 0; - -#define PR_CACHE(p, cfg, str) \ - if (!(p)->ver) \ - n += scnprintf(buf + n, len - n, str"\t\t: N/A\n"); \ - else \ - n += scnprintf(buf + n, len - n, \ - str"\t\t: %uK, %dway/set, %uB Line, %s%s%s\n", \ - (p)->sz_k, (p)->assoc, (p)->line_len, \ - (p)->vipt ? "VIPT" : "PIPT", \ - (p)->alias ? " aliasing" : "", \ - IS_ENABLED(cfg) ? "" : " (not used)"); - - PR_CACHE(&cpuinfo_arc700[c].icache, CONFIG_ARC_HAS_ICACHE, "I-Cache"); - PR_CACHE(&cpuinfo_arc700[c].dcache, CONFIG_ARC_HAS_DCACHE, "D-Cache"); - - return buf; -} - -/* - * Read the Cache Build Confuration Registers, Decode them and save into - * the cpuinfo structure for later use. - * No Validation done here, simply read/convert the BCRs - */ -void read_decode_cache_bcr(void) -{ - struct cpuinfo_arc_cache *p_ic, *p_dc; - unsigned int cpu = smp_processor_id(); - struct bcr_cache { -#ifdef CONFIG_CPU_BIG_ENDIAN - unsigned int pad:12, line_len:4, sz:4, config:4, ver:8; -#else - unsigned int ver:8, config:4, sz:4, line_len:4, pad:12; -#endif - } ibcr, dbcr; - - p_ic = &cpuinfo_arc700[cpu].icache; - READ_BCR(ARC_REG_IC_BCR, ibcr); - - if (!ibcr.ver) - goto dc_chk; - - BUG_ON(ibcr.config != 3); - p_ic->assoc = 2; /* Fixed to 2w set assoc */ - p_ic->line_len = 8 << ibcr.line_len; - p_ic->sz_k = 1 << (ibcr.sz - 1); - p_ic->ver = ibcr.ver; - p_ic->vipt = 1; - p_ic->alias = p_ic->sz_k/p_ic->assoc/TO_KB(PAGE_SIZE) > 1; - -dc_chk: - p_dc = &cpuinfo_arc700[cpu].dcache; - READ_BCR(ARC_REG_DC_BCR, dbcr); - - if (!dbcr.ver) - return; - - BUG_ON(dbcr.config != 2); - p_dc->assoc = 4; /* Fixed to 4w set assoc */ - p_dc->line_len = 16 << dbcr.line_len; - p_dc->sz_k = 1 << (dbcr.sz - 1); - p_dc->ver = dbcr.ver; - p_dc->vipt = 1; - p_dc->alias = p_dc->sz_k/p_dc->assoc/TO_KB(PAGE_SIZE) > 1; -} - -/* - * 1. Validate the Cache Geomtery (compile time config matches hardware) - * 2. If I-cache suffers from aliasing, setup work arounds (difft flush rtn) - * (aliasing D-cache configurations are not supported YET) - * 3. Enable the Caches, setup default flush mode for D-Cache - * 3. Calculate the SHMLBA used by user space - */ -void arc_cache_init(void) -{ - unsigned int __maybe_unused cpu = smp_processor_id(); - char str[256]; - - printk(arc_cache_mumbojumbo(0, str, sizeof(str))); - - if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) { - struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache; - - if (!ic->ver) - panic("cache support enabled but non-existent cache\n"); - - if (ic->line_len != L1_CACHE_BYTES) - panic("ICache line [%d] != kernel Config [%d]", - ic->line_len, L1_CACHE_BYTES); - - if (ic->ver != CONFIG_ARC_MMU_VER) - panic("Cache ver [%d] doesn't match MMU ver [%d]\n", - ic->ver, CONFIG_ARC_MMU_VER); - } - - if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE)) { - struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache; - int handled; - - if (!dc->ver) - panic("cache support enabled but non-existent cache\n"); - - if (dc->line_len != L1_CACHE_BYTES) - panic("DCache line [%d] != kernel Config [%d]", - dc->line_len, L1_CACHE_BYTES); - - /* check for D-Cache aliasing */ - handled = IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING); - - if (dc->alias && !handled) - panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n"); - else if (!dc->alias && handled) - panic("Don't need CONFIG_ARC_CACHE_VIPT_ALIASING\n"); - } -} - -#define OP_INV 0x1 -#define OP_FLUSH 0x2 -#define OP_FLUSH_N_INV 0x3 -#define OP_INV_IC 0x4 - -/* - * Common Helper for Line Operations on {I,D}-Cache - */ -static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr, - unsigned long sz, const int cacheop) -{ - unsigned int aux_cmd, aux_tag; - int num_lines; - const int full_page_op = __builtin_constant_p(sz) && sz == PAGE_SIZE; - - if (cacheop == OP_INV_IC) { - aux_cmd = ARC_REG_IC_IVIL; -#if (CONFIG_ARC_MMU_VER > 2) - aux_tag = ARC_REG_IC_PTAG; -#endif - } - else { - /* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */ - aux_cmd = cacheop & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL; -#if (CONFIG_ARC_MMU_VER > 2) - aux_tag = ARC_REG_DC_PTAG; -#endif - } - - /* Ensure we properly floor/ceil the non-line aligned/sized requests - * and have @paddr - aligned to cache line and integral @num_lines. - * This however can be avoided for page sized since: - * -@paddr will be cache-line aligned already (being page aligned) - * -@sz will be integral multiple of line size (being page sized). - */ - if (!full_page_op) { - sz += paddr & ~CACHE_LINE_MASK; - paddr &= CACHE_LINE_MASK; - vaddr &= CACHE_LINE_MASK; - } - - num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES); - -#if (CONFIG_ARC_MMU_VER <= 2) - /* MMUv2 and before: paddr contains stuffed vaddrs bits */ - paddr |= (vaddr >> PAGE_SHIFT) & 0x1F; -#else - /* if V-P const for loop, PTAG can be written once outside loop */ - if (full_page_op) - write_aux_reg(aux_tag, paddr); -#endif - - while (num_lines-- > 0) { -#if (CONFIG_ARC_MMU_VER > 2) - /* MMUv3, cache ops require paddr seperately */ - if (!full_page_op) { - write_aux_reg(aux_tag, paddr); - paddr += L1_CACHE_BYTES; - } - - write_aux_reg(aux_cmd, vaddr); - vaddr += L1_CACHE_BYTES; -#else - write_aux_reg(aux_cmd, paddr); - paddr += L1_CACHE_BYTES; -#endif - } -} - -#ifdef CONFIG_ARC_HAS_DCACHE - -/*************************************************************** - * Machine specific helpers for Entire D-Cache or Per Line ops - */ - -static inline unsigned int __before_dc_op(const int op) -{ - unsigned int reg = reg; - - if (op == OP_FLUSH_N_INV) { - /* Dcache provides 2 cmd: FLUSH or INV - * INV inturn has sub-modes: DISCARD or FLUSH-BEFORE - * flush-n-inv is achieved by INV cmd but with IM=1 - * So toggle INV sub-mode depending on op request and default - */ - reg = read_aux_reg(ARC_REG_DC_CTRL); - write_aux_reg(ARC_REG_DC_CTRL, reg | DC_CTRL_INV_MODE_FLUSH) - ; - } - - return reg; -} - -static inline void __after_dc_op(const int op, unsigned int reg) -{ - if (op & OP_FLUSH) /* flush / flush-n-inv both wait */ - while (read_aux_reg(ARC_REG_DC_CTRL) & DC_CTRL_FLUSH_STATUS); - - /* Switch back to default Invalidate mode */ - if (op == OP_FLUSH_N_INV) - write_aux_reg(ARC_REG_DC_CTRL, reg & ~DC_CTRL_INV_MODE_FLUSH); -} - -/* - * Operation on Entire D-Cache - * @cacheop = {OP_INV, OP_FLUSH, OP_FLUSH_N_INV} - * Note that constant propagation ensures all the checks are gone - * in generated code - */ -static inline void __dc_entire_op(const int cacheop) -{ - unsigned int ctrl_reg; - int aux; - - ctrl_reg = __before_dc_op(cacheop); - - if (cacheop & OP_INV) /* Inv or flush-n-inv use same cmd reg */ - aux = ARC_REG_DC_IVDC; - else - aux = ARC_REG_DC_FLSH; - - write_aux_reg(aux, 0x1); - - __after_dc_op(cacheop, ctrl_reg); -} - -/* For kernel mappings cache operation: index is same as paddr */ -#define __dc_line_op_k(p, sz, op) __dc_line_op(p, p, sz, op) - -/* - * D-Cache : Per Line INV (discard or wback+discard) or FLUSH (wback) - */ -static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr, - unsigned long sz, const int cacheop) -{ - unsigned long flags; - unsigned int ctrl_reg; - - local_irq_save(flags); - - ctrl_reg = __before_dc_op(cacheop); - - __cache_line_loop(paddr, vaddr, sz, cacheop); - - __after_dc_op(cacheop, ctrl_reg); - - local_irq_restore(flags); -} - -#else - -#define __dc_entire_op(cacheop) -#define __dc_line_op(paddr, vaddr, sz, cacheop) -#define __dc_line_op_k(paddr, sz, cacheop) - -#endif /* CONFIG_ARC_HAS_DCACHE */ - - -#ifdef CONFIG_ARC_HAS_ICACHE - -/* - * I-Cache Aliasing in ARC700 VIPT caches - * - * ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag. - * The orig Cache Management Module "CDU" only required paddr to invalidate a - * certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry. - * Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching - * the exact same line. - * - * However for larger Caches (way-size > page-size) - i.e. in Aliasing config, - * paddr alone could not be used to correctly index the cache. - * - * ------------------ - * MMU v1/v2 (Fixed Page Size 8k) - * ------------------ - * The solution was to provide CDU with these additonal vaddr bits. These - * would be bits [x:13], x would depend on cache-geometry, 13 comes from - * standard page size of 8k. - * H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits - * of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the - * orig 5 bits of paddr were anyways ignored by CDU line ops, as they - * represent the offset within cache-line. The adv of using this "clumsy" - * interface for additional info was no new reg was needed in CDU programming - * model. - * - * 17:13 represented the max num of bits passable, actual bits needed were - * fewer, based on the num-of-aliases possible. - * -for 2 alias possibility, only bit 13 needed (32K cache) - * -for 4 alias possibility, bits 14:13 needed (64K cache) - * - * ------------------ - * MMU v3 - * ------------------ - * This ver of MMU supports variable page sizes (1k-16k): although Linux will - * only support 8k (default), 16k and 4k. - * However from hardware perspective, smaller page sizes aggrevate aliasing - * meaning more vaddr bits needed to disambiguate the cache-line-op ; - * the existing scheme of piggybacking won't work for certain configurations. - * Two new registers IC_PTAG and DC_PTAG inttoduced. - * "tag" bits are provided in PTAG, index bits in existing IVIL/IVDL/FLDL regs - */ - -/*********************************************************** - * Machine specific helper for per line I-Cache invalidate. - */ - -static inline void __ic_entire_inv(void) -{ - write_aux_reg(ARC_REG_IC_IVIC, 1); - read_aux_reg(ARC_REG_IC_CTRL); /* blocks */ -} - -static inline void -__ic_line_inv_vaddr_local(unsigned long paddr, unsigned long vaddr, - unsigned long sz) -{ - unsigned long flags; - - local_irq_save(flags); - __cache_line_loop(paddr, vaddr, sz, OP_INV_IC); - local_irq_restore(flags); -} - -#ifndef CONFIG_SMP - -#define __ic_line_inv_vaddr(p, v, s) __ic_line_inv_vaddr_local(p, v, s) - -#else - -struct ic_inv_args { - unsigned long paddr, vaddr; - int sz; -}; - -static void __ic_line_inv_vaddr_helper(void *info) -{ - struct ic_inv_args *ic_inv = info; - - __ic_line_inv_vaddr_local(ic_inv->paddr, ic_inv->vaddr, ic_inv->sz); -} - -static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr, - unsigned long sz) -{ - struct ic_inv_args ic_inv = { - .paddr = paddr, - .vaddr = vaddr, - .sz = sz - }; - - on_each_cpu(__ic_line_inv_vaddr_helper, &ic_inv, 1); -} - -#endif /* CONFIG_SMP */ - -#else /* !CONFIG_ARC_HAS_ICACHE */ - -#define __ic_entire_inv() -#define __ic_line_inv_vaddr(pstart, vstart, sz) - -#endif /* CONFIG_ARC_HAS_ICACHE */ - - -/*********************************************************** - * Exported APIs - */ - -/* - * Handle cache congruency of kernel and userspace mappings of page when kernel - * writes-to/reads-from - * - * The idea is to defer flushing of kernel mapping after a WRITE, possible if: - * -dcache is NOT aliasing, hence any U/K-mappings of page are congruent - * -U-mapping doesn't exist yet for page (finalised in update_mmu_cache) - * -In SMP, if hardware caches are coherent - * - * There's a corollary case, where kernel READs from a userspace mapped page. - * If the U-mapping is not congruent to to K-mapping, former needs flushing. - */ -void flush_dcache_page(struct page *page) -{ - struct address_space *mapping; - - if (!cache_is_vipt_aliasing()) { - clear_bit(PG_dc_clean, &page->flags); - return; - } - - /* don't handle anon pages here */ - mapping = page_mapping(page); - if (!mapping) - return; - - /* - * pagecache page, file not yet mapped to userspace - * Make a note that K-mapping is dirty - */ - if (!mapping_mapped(mapping)) { - clear_bit(PG_dc_clean, &page->flags); - } else if (page_mapped(page)) { - - /* kernel reading from page with U-mapping */ - void *paddr = page_address(page); - unsigned long vaddr = page->index << PAGE_CACHE_SHIFT; - - if (addr_not_cache_congruent(paddr, vaddr)) - __flush_dcache_page(paddr, vaddr); - } -} -EXPORT_SYMBOL(flush_dcache_page); - - -void dma_cache_wback_inv(unsigned long start, unsigned long sz) -{ - __dc_line_op_k(start, sz, OP_FLUSH_N_INV); -} -EXPORT_SYMBOL(dma_cache_wback_inv); - -void dma_cache_inv(unsigned long start, unsigned long sz) -{ - __dc_line_op_k(start, sz, OP_INV); -} -EXPORT_SYMBOL(dma_cache_inv); - -void dma_cache_wback(unsigned long start, unsigned long sz) -{ - __dc_line_op_k(start, sz, OP_FLUSH); -} -EXPORT_SYMBOL(dma_cache_wback); - -/* - * This is API for making I/D Caches consistent when modifying - * kernel code (loadable modules, kprobes, kgdb...) - * This is called on insmod, with kernel virtual address for CODE of - * the module. ARC cache maintenance ops require PHY address thus we - * need to convert vmalloc addr to PHY addr - */ -void flush_icache_range(unsigned long kstart, unsigned long kend) -{ - unsigned int tot_sz; - - WARN(kstart < TASK_SIZE, "%s() can't handle user vaddr", __func__); - - /* Shortcut for bigger flush ranges. - * Here we don't care if this was kernel virtual or phy addr - */ - tot_sz = kend - kstart; - if (tot_sz > PAGE_SIZE) { - flush_cache_all(); - return; - } - - /* Case: Kernel Phy addr (0x8000_0000 onwards) */ - if (likely(kstart > PAGE_OFFSET)) { - /* - * The 2nd arg despite being paddr will be used to index icache - * This is OK since no alternate virtual mappings will exist - * given the callers for this case: kprobe/kgdb in built-in - * kernel code only. - */ - __sync_icache_dcache(kstart, kstart, kend - kstart); - return; - } - - /* - * Case: Kernel Vaddr (0x7000_0000 to 0x7fff_ffff) - * (1) ARC Cache Maintenance ops only take Phy addr, hence special - * handling of kernel vaddr. - * - * (2) Despite @tot_sz being < PAGE_SIZE (bigger cases handled already), - * it still needs to handle a 2 page scenario, where the range - * straddles across 2 virtual pages and hence need for loop - */ - while (tot_sz > 0) { - unsigned int off, sz; - unsigned long phy, pfn; - - off = kstart % PAGE_SIZE; - pfn = vmalloc_to_pfn((void *)kstart); - phy = (pfn << PAGE_SHIFT) + off; - sz = min_t(unsigned int, tot_sz, PAGE_SIZE - off); - __sync_icache_dcache(phy, kstart, sz); - kstart += sz; - tot_sz -= sz; - } -} -EXPORT_SYMBOL(flush_icache_range); - -/* - * General purpose helper to make I and D cache lines consistent. - * @paddr is phy addr of region - * @vaddr is typically user vaddr (breakpoint) or kernel vaddr (vmalloc) - * However in one instance, when called by kprobe (for a breakpt in - * builtin kernel code) @vaddr will be paddr only, meaning CDU operation will - * use a paddr to index the cache (despite VIPT). This is fine since since a - * builtin kernel page will not have any virtual mappings. - * kprobe on loadable module will be kernel vaddr. - */ -void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len) -{ - __dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV); - __ic_line_inv_vaddr(paddr, vaddr, len); -} - -/* wrapper to compile time eliminate alignment checks in flush loop */ -void __inv_icache_page(unsigned long paddr, unsigned long vaddr) -{ - __ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE); -} - -/* - * wrapper to clearout kernel or userspace mappings of a page - * For kernel mappings @vaddr == @paddr - */ -void ___flush_dcache_page(unsigned long paddr, unsigned long vaddr) -{ - __dc_line_op(paddr, vaddr & PAGE_MASK, PAGE_SIZE, OP_FLUSH_N_INV); -} - -noinline void flush_cache_all(void) -{ - unsigned long flags; - - local_irq_save(flags); - - __ic_entire_inv(); - __dc_entire_op(OP_FLUSH_N_INV); - - local_irq_restore(flags); - -} - -#ifdef CONFIG_ARC_CACHE_VIPT_ALIASING - -void flush_cache_mm(struct mm_struct *mm) -{ - flush_cache_all(); -} - -void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr, - unsigned long pfn) -{ - unsigned int paddr = pfn << PAGE_SHIFT; - - u_vaddr &= PAGE_MASK; - - ___flush_dcache_page(paddr, u_vaddr); - - if (vma->vm_flags & VM_EXEC) - __inv_icache_page(paddr, u_vaddr); -} - -void flush_cache_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end) -{ - flush_cache_all(); -} - -void flush_anon_page(struct vm_area_struct *vma, struct page *page, - unsigned long u_vaddr) -{ - /* TBD: do we really need to clear the kernel mapping */ - __flush_dcache_page(page_address(page), u_vaddr); - __flush_dcache_page(page_address(page), page_address(page)); - -} - -#endif - -void copy_user_highpage(struct page *to, struct page *from, - unsigned long u_vaddr, struct vm_area_struct *vma) -{ - void *kfrom = page_address(from); - void *kto = page_address(to); - int clean_src_k_mappings = 0; - - /* - * If SRC page was already mapped in userspace AND it's U-mapping is - * not congruent with K-mapping, sync former to physical page so that - * K-mapping in memcpy below, sees the right data - * - * Note that while @u_vaddr refers to DST page's userspace vaddr, it is - * equally valid for SRC page as well - */ - if (page_mapped(from) && addr_not_cache_congruent(kfrom, u_vaddr)) { - __flush_dcache_page(kfrom, u_vaddr); - clean_src_k_mappings = 1; - } - - copy_page(kto, kfrom); - - /* - * Mark DST page K-mapping as dirty for a later finalization by - * update_mmu_cache(). Although the finalization could have been done - * here as well (given that both vaddr/paddr are available). - * But update_mmu_cache() already has code to do that for other - * non copied user pages (e.g. read faults which wire in pagecache page - * directly). - */ - clear_bit(PG_dc_clean, &to->flags); - - /* - * if SRC was already usermapped and non-congruent to kernel mapping - * sync the kernel mapping back to physical page - */ - if (clean_src_k_mappings) { - __flush_dcache_page(kfrom, kfrom); - set_bit(PG_dc_clean, &from->flags); - } else { - clear_bit(PG_dc_clean, &from->flags); - } -} - -void clear_user_page(void *to, unsigned long u_vaddr, struct page *page) -{ - clear_page(to); - clear_bit(PG_dc_clean, &page->flags); -} - - -/********************************************************************** - * Explicit Cache flush request from user space via syscall - * Needed for JITs which generate code on the fly - */ -SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags) -{ - /* TBD: optimize this */ - flush_cache_all(); - return 0; -} -- cgit v1.2.3-54-g00ecf