From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?=
 <emulatorman@parabola.nu>
Date: Wed, 5 Aug 2015 17:04:01 -0300
Subject: Initial import

---
 arch/arm/boot/Makefile | 118 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 118 insertions(+)
 create mode 100644 arch/arm/boot/Makefile

(limited to 'arch/arm/boot/Makefile')

diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
new file mode 100644
index 000000000..9eca7aee9
--- /dev/null
+++ b/arch/arm/boot/Makefile
@@ -0,0 +1,118 @@
+#
+# arch/arm/boot/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995-2002 Russell King
+#
+
+ifneq ($(MACHINE),)
+include $(MACHINE)/Makefile.boot
+endif
+
+# Note: the following conditions must always be true:
+#   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+ZRELADDR    := $(zreladdr-y)
+PARAMS_PHYS := $(params_phys-y)
+INITRD_PHYS := $(initrd_phys-y)
+
+export ZRELADDR INITRD_PHYS PARAMS_PHYS
+
+targets := Image zImage xipImage bootpImage uImage
+
+ifeq ($(CONFIG_XIP_KERNEL),y)
+
+$(obj)/xipImage: vmlinux FORCE
+	$(call if_changed,objcopy)
+	@$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+
+$(obj)/Image $(obj)/zImage: FORCE
+	@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
+	@echo 'Only the xipImage target is available in this case'
+	@false
+
+else
+
+$(obj)/xipImage: FORCE
+	@echo 'Kernel not configured for XIP (CONFIG_XIP_KERNEL!=y)'
+	@false
+
+$(obj)/Image: vmlinux FORCE
+	$(call if_changed,objcopy)
+	@$(kecho) '  Kernel: $@ is ready'
+
+$(obj)/compressed/vmlinux: $(obj)/Image FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
+
+$(obj)/zImage:	$(obj)/compressed/vmlinux FORCE
+	$(call if_changed,objcopy)
+	@$(kecho) '  Kernel: $@ is ready'
+
+endif
+
+ifneq ($(LOADADDR),)
+  UIMAGE_LOADADDR=$(LOADADDR)
+else
+  ifeq ($(CONFIG_ZBOOT_ROM),y)
+    UIMAGE_LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
+  else
+    UIMAGE_LOADADDR=$(ZRELADDR)
+  endif
+endif
+
+check_for_multiple_loadaddr = \
+if [ $(words $(UIMAGE_LOADADDR)) -ne 1 ]; then \
+	echo 'multiple (or no) load addresses: $(UIMAGE_LOADADDR)'; \
+	echo 'This is incompatible with uImages'; \
+	echo 'Specify LOADADDR on the commandline to build an uImage'; \
+	false; \
+fi
+
+$(obj)/uImage:	$(obj)/zImage FORCE
+	@$(check_for_multiple_loadaddr)
+	$(call if_changed,uimage)
+	@$(kecho) '  Image $@ is ready'
+
+$(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
+	@:
+
+$(obj)/bootpImage: $(obj)/bootp/bootp FORCE
+	$(call if_changed,objcopy)
+	@$(kecho) '  Kernel: $@ is ready'
+
+PHONY += initrd FORCE
+initrd:
+	@test "$(INITRD_PHYS)" != "" || \
+	(echo This machine does not support INITRD; exit -1)
+	@test "$(INITRD)" != "" || \
+	(echo You must specify INITRD; exit -1)
+
+install:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
+	$(obj)/Image System.map "$(INSTALL_PATH)"
+
+zinstall:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
+	$(obj)/zImage System.map "$(INSTALL_PATH)"
+
+uinstall:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
+	$(obj)/uImage System.map "$(INSTALL_PATH)"
+
+zi:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
+	$(obj)/zImage System.map "$(INSTALL_PATH)"
+
+i:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
+	$(obj)/Image System.map "$(INSTALL_PATH)"
+
+subdir-	    := bootp compressed dts
-- 
cgit v1.2.3