From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?=
 <emulatorman@parabola.nu>
Date: Wed, 5 Aug 2015 17:04:01 -0300
Subject: Initial import

---
 arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 440 ++++++++++++++++++++++++++++++++
 1 file changed, 440 insertions(+)
 create mode 100644 arch/arm/boot/dts/vexpress-v2m-rs1.dtsi

(limited to 'arch/arm/boot/dts/vexpress-v2m-rs1.dtsi')

diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
new file mode 100644
index 000000000..2efb2058b
--- /dev/null
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -0,0 +1,440 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * original variant (vexpress-v2m.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m.dtsi!
+ */
+
+	motherboard {
+		model = "V2M-P1";
+		arm,hbi = <0x190>;
+		arm,vexpress,site = <0>;
+		arm,v2m-memory-map = "rs1";
+		compatible = "arm,vexpress,v2m-p1", "simple-bus";
+		#address-cells = <2>; /* SMB chipselect number and offset */
+		#size-cells = <1>;
+		#interrupt-cells = <1>;
+		ranges;
+
+		flash@0,00000000 {
+			compatible = "arm,vexpress-flash", "cfi-flash";
+			reg = <0 0x00000000 0x04000000>,
+			      <4 0x00000000 0x04000000>;
+			bank-width = <4>;
+		};
+
+		psram@1,00000000 {
+			compatible = "arm,vexpress-psram", "mtd-ram";
+			reg = <1 0x00000000 0x02000000>;
+			bank-width = <4>;
+		};
+
+		v2m_video_ram: vram@2,00000000 {
+			compatible = "arm,vexpress-vram";
+			reg = <2 0x00000000 0x00800000>;
+		};
+
+		ethernet@2,02000000 {
+			compatible = "smsc,lan9118", "smsc,lan9115";
+			reg = <2 0x02000000 0x10000>;
+			interrupts = <15>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,irq-active-high;
+			smsc,irq-push-pull;
+			vdd33a-supply = <&v2m_fixed_3v3>;
+			vddvario-supply = <&v2m_fixed_3v3>;
+		};
+
+		usb@2,03000000 {
+			compatible = "nxp,usb-isp1761";
+			reg = <2 0x03000000 0x20000>;
+			interrupts = <16>;
+			port1-otg;
+		};
+
+		iofpga@3,00000000 {
+			compatible = "arm,amba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 3 0 0x200000>;
+
+			v2m_sysreg: sysreg@010000 {
+				compatible = "arm,vexpress-sysreg";
+				reg = <0x010000 0x1000>;
+
+				v2m_led_gpios: sys_led@08 {
+					compatible = "arm,vexpress-sysreg,sys_led";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				v2m_mmc_gpios: sys_mci@48 {
+					compatible = "arm,vexpress-sysreg,sys_mci";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				v2m_flash_gpios: sys_flash@4c {
+					compatible = "arm,vexpress-sysreg,sys_flash";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+
+			v2m_sysctl: sysctl@020000 {
+				compatible = "arm,sp810", "arm,primecell";
+				reg = <0x020000 0x1000>;
+				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+				clock-names = "refclk", "timclk", "apb_pclk";
+				#clock-cells = <1>;
+				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+			};
+
+			/* PCI-E I2C bus */
+			v2m_i2c_pcie: i2c@030000 {
+				compatible = "arm,versatile-i2c";
+				reg = <0x030000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pcie-switch@60 {
+					compatible = "idt,89hpes32h8";
+					reg = <0x60>;
+				};
+			};
+
+			aaci@040000 {
+				compatible = "arm,pl041", "arm,primecell";
+				reg = <0x040000 0x1000>;
+				interrupts = <11>;
+				clocks = <&smbclk>;
+				clock-names = "apb_pclk";
+			};
+
+			mmci@050000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0x050000 0x1000>;
+				interrupts = <9 10>;
+				cd-gpios = <&v2m_mmc_gpios 0 0>;
+				wp-gpios = <&v2m_mmc_gpios 1 0>;
+				max-frequency = <12000000>;
+				vmmc-supply = <&v2m_fixed_3v3>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "mclk", "apb_pclk";
+			};
+
+			kmi@060000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x060000 0x1000>;
+				interrupts = <12>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+
+			kmi@070000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x070000 0x1000>;
+				interrupts = <13>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+
+			v2m_serial0: uart@090000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x090000 0x1000>;
+				interrupts = <5>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial1: uart@0a0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0a0000 0x1000>;
+				interrupts = <6>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial2: uart@0b0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0b0000 0x1000>;
+				interrupts = <7>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial3: uart@0c0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0c0000 0x1000>;
+				interrupts = <8>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			wdt@0f0000 {
+				compatible = "arm,sp805", "arm,primecell";
+				reg = <0x0f0000 0x1000>;
+				interrupts = <0>;
+				clocks = <&v2m_refclk32khz>, <&smbclk>;
+				clock-names = "wdogclk", "apb_pclk";
+			};
+
+			v2m_timer01: timer@110000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x110000 0x1000>;
+				interrupts = <2>;
+				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+				clock-names = "timclken1", "timclken2", "apb_pclk";
+			};
+
+			v2m_timer23: timer@120000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x120000 0x1000>;
+				interrupts = <3>;
+				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+				clock-names = "timclken1", "timclken2", "apb_pclk";
+			};
+
+			/* DVI I2C bus */
+			v2m_i2c_dvi: i2c@160000 {
+				compatible = "arm,versatile-i2c";
+				reg = <0x160000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dvi-transmitter@39 {
+					compatible = "sil,sii9022-tpi", "sil,sii9022";
+					reg = <0x39>;
+				};
+
+				dvi-transmitter@60 {
+					compatible = "sil,sii9022-cpi", "sil,sii9022";
+					reg = <0x60>;
+				};
+			};
+
+			rtc@170000 {
+				compatible = "arm,pl031", "arm,primecell";
+				reg = <0x170000 0x1000>;
+				interrupts = <4>;
+				clocks = <&smbclk>;
+				clock-names = "apb_pclk";
+			};
+
+			compact-flash@1a0000 {
+				compatible = "arm,vexpress-cf", "ata-generic";
+				reg = <0x1a0000 0x100
+				       0x1a0100 0xf00>;
+				reg-shift = <2>;
+			};
+
+			clcd@1f0000 {
+				compatible = "arm,pl111", "arm,primecell";
+				reg = <0x1f0000 0x1000>;
+				interrupt-names = "combined";
+				interrupts = <14>;
+				clocks = <&v2m_oscclk1>, <&smbclk>;
+				clock-names = "clcdclk", "apb_pclk";
+				memory-region = <&v2m_video_ram>;
+				max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
+
+				port {
+					v2m_clcd_pads: endpoint {
+						remote-endpoint = <&v2m_clcd_panel>;
+						arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+					};
+				};
+
+				panel {
+					compatible = "panel-dpi";
+
+					port {
+						v2m_clcd_panel: endpoint {
+							remote-endpoint = <&v2m_clcd_pads>;
+						};
+					};
+
+					panel-timing {
+						clock-frequency = <25175000>;
+						hactive = <640>;
+						hback-porch = <40>;
+						hfront-porch = <24>;
+						hsync-len = <96>;
+						vactive = <480>;
+						vback-porch = <32>;
+						vfront-porch = <11>;
+						vsync-len = <2>;
+					};
+				};
+			};
+		};
+
+		v2m_fixed_3v3: fixedregulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		v2m_clk24mhz: clk24mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "v2m:clk24mhz";
+		};
+
+		v2m_refclk1mhz: refclk1mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+			clock-output-names = "v2m:refclk1mhz";
+		};
+
+		v2m_refclk32khz: refclk32khz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "v2m:refclk32khz";
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			user@1 {
+				label = "v2m:green:user1";
+				gpios = <&v2m_led_gpios 0 0>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			user@2 {
+				label = "v2m:green:user2";
+				gpios = <&v2m_led_gpios 1 0>;
+				linux,default-trigger = "mmc0";
+			};
+
+			user@3 {
+				label = "v2m:green:user3";
+				gpios = <&v2m_led_gpios 2 0>;
+				linux,default-trigger = "cpu0";
+			};
+
+			user@4 {
+				label = "v2m:green:user4";
+				gpios = <&v2m_led_gpios 3 0>;
+				linux,default-trigger = "cpu1";
+			};
+
+			user@5 {
+				label = "v2m:green:user5";
+				gpios = <&v2m_led_gpios 4 0>;
+				linux,default-trigger = "cpu2";
+			};
+
+			user@6 {
+				label = "v2m:green:user6";
+				gpios = <&v2m_led_gpios 5 0>;
+				linux,default-trigger = "cpu3";
+			};
+
+			user@7 {
+				label = "v2m:green:user7";
+				gpios = <&v2m_led_gpios 6 0>;
+				linux,default-trigger = "cpu4";
+			};
+
+			user@8 {
+				label = "v2m:green:user8";
+				gpios = <&v2m_led_gpios 7 0>;
+				linux,default-trigger = "cpu5";
+			};
+		};
+
+		mcc {
+			compatible = "arm,vexpress,config-bus";
+			arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+			osc@0 {
+				/* MCC static memory clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 0>;
+				freq-range = <25000000 60000000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk0";
+			};
+
+			v2m_oscclk1: osc@1 {
+				/* CLCD clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 1>;
+				freq-range = <23750000 65000000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk1";
+			};
+
+			v2m_oscclk2: osc@2 {
+				/* IO FPGA peripheral clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 2>;
+				freq-range = <24000000 24000000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk2";
+			};
+
+			volt@0 {
+				/* Logic level voltage */
+				compatible = "arm,vexpress-volt";
+				arm,vexpress-sysreg,func = <2 0>;
+				regulator-name = "VIO";
+				regulator-always-on;
+				label = "VIO";
+			};
+
+			temp@0 {
+				/* MCC internal operating temperature */
+				compatible = "arm,vexpress-temp";
+				arm,vexpress-sysreg,func = <4 0>;
+				label = "MCC";
+			};
+
+			reset@0 {
+				compatible = "arm,vexpress-reset";
+				arm,vexpress-sysreg,func = <5 0>;
+			};
+
+			muxfpga@0 {
+				compatible = "arm,vexpress-muxfpga";
+				arm,vexpress-sysreg,func = <7 0>;
+			};
+
+			shutdown@0 {
+				compatible = "arm,vexpress-shutdown";
+				arm,vexpress-sysreg,func = <8 0>;
+			};
+
+			reboot@0 {
+				compatible = "arm,vexpress-reboot";
+				arm,vexpress-sysreg,func = <9 0>;
+			};
+
+			dvimode@0 {
+				compatible = "arm,vexpress-dvimode";
+				arm,vexpress-sysreg,func = <11 0>;
+			};
+		};
+	};
-- 
cgit v1.2.3