From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- arch/blackfin/kernel/bfin_dma.c | 612 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 612 insertions(+) create mode 100644 arch/blackfin/kernel/bfin_dma.c (limited to 'arch/blackfin/kernel/bfin_dma.c') diff --git a/arch/blackfin/kernel/bfin_dma.c b/arch/blackfin/kernel/bfin_dma.c new file mode 100644 index 000000000..4a32f2dd5 --- /dev/null +++ b/arch/blackfin/kernel/bfin_dma.c @@ -0,0 +1,612 @@ +/* + * bfin_dma.c - Blackfin DMA implementation + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* + * To make sure we work around 05000119 - we always check DMA_DONE bit, + * never the DMA_RUN bit + */ + +struct dma_channel dma_ch[MAX_DMA_CHANNELS]; +EXPORT_SYMBOL(dma_ch); + +static int __init blackfin_dma_init(void) +{ + int i; + + printk(KERN_INFO "Blackfin DMA Controller\n"); + + +#if ANOMALY_05000480 + bfin_write_DMAC_TC_PER(0x0111); +#endif + + for (i = 0; i < MAX_DMA_CHANNELS; i++) { + atomic_set(&dma_ch[i].chan_status, 0); + dma_ch[i].regs = dma_io_base_addr[i]; + } +#if defined(CH_MEM_STREAM3_SRC) && defined(CONFIG_BF60x) + /* Mark MEMDMA Channel 3 as requested since we're using it internally */ + request_dma(CH_MEM_STREAM3_DEST, "Blackfin dma_memcpy"); + request_dma(CH_MEM_STREAM3_SRC, "Blackfin dma_memcpy"); +#else + /* Mark MEMDMA Channel 0 as requested since we're using it internally */ + request_dma(CH_MEM_STREAM0_DEST, "Blackfin dma_memcpy"); + request_dma(CH_MEM_STREAM0_SRC, "Blackfin dma_memcpy"); +#endif + +#if defined(CONFIG_DEB_DMA_URGENT) + bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() + | DEB1_URGENT | DEB2_URGENT | DEB3_URGENT); +#endif + + return 0; +} +arch_initcall(blackfin_dma_init); + +#ifdef CONFIG_PROC_FS +static int proc_dma_show(struct seq_file *m, void *v) +{ + int i; + + for (i = 0; i < MAX_DMA_CHANNELS; ++i) + if (dma_channel_active(i)) + seq_printf(m, "%2d: %s\n", i, dma_ch[i].device_id); + + return 0; +} + +static int proc_dma_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_dma_show, NULL); +} + +static const struct file_operations proc_dma_operations = { + .open = proc_dma_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init proc_dma_init(void) +{ + proc_create("dma", 0, NULL, &proc_dma_operations); + return 0; +} +late_initcall(proc_dma_init); +#endif + +static void set_dma_peripheral_map(unsigned int channel, const char *device_id) +{ +#ifdef CONFIG_BF54x + unsigned int per_map; + + switch (channel) { + case CH_UART2_RX: per_map = 0xC << 12; break; + case CH_UART2_TX: per_map = 0xD << 12; break; + case CH_UART3_RX: per_map = 0xE << 12; break; + case CH_UART3_TX: per_map = 0xF << 12; break; + default: return; + } + + if (strncmp(device_id, "BFIN_UART", 9) == 0) + dma_ch[channel].regs->peripheral_map = per_map; +#endif +} + +/** + * request_dma - request a DMA channel + * + * Request the specific DMA channel from the system if it's available. + */ +int request_dma(unsigned int channel, const char *device_id) +{ + pr_debug("request_dma() : BEGIN\n"); + + if (device_id == NULL) + printk(KERN_WARNING "request_dma(%u): no device_id given\n", channel); + +#if defined(CONFIG_BF561) && ANOMALY_05000182 + if (channel >= CH_IMEM_STREAM0_DEST && channel <= CH_IMEM_STREAM1_DEST) { + if (get_cclk() > 500000000) { + printk(KERN_WARNING + "Request IMDMA failed due to ANOMALY 05000182\n"); + return -EFAULT; + } + } +#endif + + if (atomic_cmpxchg(&dma_ch[channel].chan_status, 0, 1)) { + pr_debug("DMA CHANNEL IN USE\n"); + return -EBUSY; + } + + set_dma_peripheral_map(channel, device_id); + dma_ch[channel].device_id = device_id; + dma_ch[channel].irq = 0; + + /* This is to be enabled by putting a restriction - + * you have to request DMA, before doing any operations on + * descriptor/channel + */ + pr_debug("request_dma() : END\n"); + return 0; +} +EXPORT_SYMBOL(request_dma); + +int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data) +{ + int ret; + unsigned int irq; + + BUG_ON(channel >= MAX_DMA_CHANNELS || !callback || + !atomic_read(&dma_ch[channel].chan_status)); + + irq = channel2irq(channel); + ret = request_irq(irq, callback, 0, dma_ch[channel].device_id, data); + if (ret) + return ret; + + dma_ch[channel].irq = irq; + dma_ch[channel].data = data; + + return 0; +} +EXPORT_SYMBOL(set_dma_callback); + +/** + * clear_dma_buffer - clear DMA fifos for specified channel + * + * Set the Buffer Clear bit in the Configuration register of specific DMA + * channel. This will stop the descriptor based DMA operation. + */ +static void clear_dma_buffer(unsigned int channel) +{ + dma_ch[channel].regs->cfg |= RESTART; + SSYNC(); + dma_ch[channel].regs->cfg &= ~RESTART; +} + +void free_dma(unsigned int channel) +{ + pr_debug("freedma() : BEGIN\n"); + BUG_ON(channel >= MAX_DMA_CHANNELS || + !atomic_read(&dma_ch[channel].chan_status)); + + /* Halt the DMA */ + disable_dma(channel); + clear_dma_buffer(channel); + + if (dma_ch[channel].irq) + free_irq(dma_ch[channel].irq, dma_ch[channel].data); + + /* Clear the DMA Variable in the Channel */ + atomic_set(&dma_ch[channel].chan_status, 0); + + pr_debug("freedma() : END\n"); +} +EXPORT_SYMBOL(free_dma); + +#ifdef CONFIG_PM +# ifndef MAX_DMA_SUSPEND_CHANNELS +# define MAX_DMA_SUSPEND_CHANNELS MAX_DMA_CHANNELS +# endif +# ifndef CONFIG_BF60x +int blackfin_dma_suspend(void) +{ + int i; + + for (i = 0; i < MAX_DMA_CHANNELS; ++i) { + if (dma_ch[i].regs->cfg & DMAEN) { + printk(KERN_ERR "DMA Channel %d failed to suspend\n", i); + return -EBUSY; + } + if (i < MAX_DMA_SUSPEND_CHANNELS) + dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map; + } + +#if ANOMALY_05000480 + bfin_write_DMAC_TC_PER(0x0); +#endif + return 0; +} + +void blackfin_dma_resume(void) +{ + int i; + + for (i = 0; i < MAX_DMA_CHANNELS; ++i) { + dma_ch[i].regs->cfg = 0; + if (i < MAX_DMA_SUSPEND_CHANNELS) + dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map; + } +#if ANOMALY_05000480 + bfin_write_DMAC_TC_PER(0x0111); +#endif +} +# else +int blackfin_dma_suspend(void) +{ + return 0; +} + +void blackfin_dma_resume(void) +{ +} +#endif +#endif + +/** + * blackfin_dma_early_init - minimal DMA init + * + * Setup a few DMA registers so we can safely do DMA transfers early on in + * the kernel booting process. Really this just means using dma_memcpy(). + */ +void __init blackfin_dma_early_init(void) +{ + early_shadow_stamp(); + bfin_write_MDMA_S0_CONFIG(0); + bfin_write_MDMA_S1_CONFIG(0); +} + +void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size) +{ + unsigned long dst = (unsigned long)pdst; + unsigned long src = (unsigned long)psrc; + struct dma_register *dst_ch, *src_ch; + + early_shadow_stamp(); + + /* We assume that everything is 4 byte aligned, so include + * a basic sanity check + */ + BUG_ON(dst % 4); + BUG_ON(src % 4); + BUG_ON(size % 4); + + src_ch = 0; + /* Find an avalible memDMA channel */ + while (1) { + if (src_ch == (struct dma_register *)MDMA_S0_NEXT_DESC_PTR) { + dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR; + src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR; + } else { + dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR; + src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR; + } + + if (!DMA_MMR_READ(&src_ch->cfg)) + break; + else if (DMA_MMR_READ(&dst_ch->irq_status) & DMA_DONE) { + DMA_MMR_WRITE(&src_ch->cfg, 0); + break; + } + } + + /* Force a sync in case a previous config reset on this channel + * occurred. This is needed so subsequent writes to DMA registers + * are not spuriously lost/corrupted. + */ + __builtin_bfin_ssync(); + + /* Destination */ + bfin_write32(&dst_ch->start_addr, dst); + DMA_MMR_WRITE(&dst_ch->x_count, size >> 2); + DMA_MMR_WRITE(&dst_ch->x_modify, 1 << 2); + DMA_MMR_WRITE(&dst_ch->irq_status, DMA_DONE | DMA_ERR); + + /* Source */ + bfin_write32(&src_ch->start_addr, src); + DMA_MMR_WRITE(&src_ch->x_count, size >> 2); + DMA_MMR_WRITE(&src_ch->x_modify, 1 << 2); + DMA_MMR_WRITE(&src_ch->irq_status, DMA_DONE | DMA_ERR); + + /* Enable */ + DMA_MMR_WRITE(&src_ch->cfg, DMAEN | WDSIZE_32); + DMA_MMR_WRITE(&dst_ch->cfg, WNR | DI_EN_X | DMAEN | WDSIZE_32); + + /* Since we are atomic now, don't use the workaround ssync */ + __builtin_bfin_ssync(); + +#ifdef CONFIG_BF60x + /* Work around a possible MDMA anomaly. Running 2 MDMA channels to + * transfer DDR data to L1 SRAM may corrupt data. + * Should be reverted after this issue is root caused. + */ + while (!(DMA_MMR_READ(&dst_ch->irq_status) & DMA_DONE)) + continue; +#endif +} + +void __init early_dma_memcpy_done(void) +{ + early_shadow_stamp(); + + while ((bfin_read_MDMA_S0_CONFIG() && !(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) || + (bfin_read_MDMA_S1_CONFIG() && !(bfin_read_MDMA_D1_IRQ_STATUS() & DMA_DONE))) + continue; + + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + bfin_write_MDMA_D1_IRQ_STATUS(DMA_DONE | DMA_ERR); + /* + * Now that DMA is done, we would normally flush cache, but + * i/d cache isn't running this early, so we don't bother, + * and just clear out the DMA channel for next time + */ + bfin_write_MDMA_S0_CONFIG(0); + bfin_write_MDMA_S1_CONFIG(0); + bfin_write_MDMA_D0_CONFIG(0); + bfin_write_MDMA_D1_CONFIG(0); + + __builtin_bfin_ssync(); +} + +#if defined(CH_MEM_STREAM3_SRC) && defined(CONFIG_BF60x) +#define bfin_read_MDMA_S_CONFIG bfin_read_MDMA_S3_CONFIG +#define bfin_write_MDMA_S_CONFIG bfin_write_MDMA_S3_CONFIG +#define bfin_write_MDMA_S_START_ADDR bfin_write_MDMA_S3_START_ADDR +#define bfin_write_MDMA_S_IRQ_STATUS bfin_write_MDMA_S3_IRQ_STATUS +#define bfin_write_MDMA_S_X_COUNT bfin_write_MDMA_S3_X_COUNT +#define bfin_write_MDMA_S_X_MODIFY bfin_write_MDMA_S3_X_MODIFY +#define bfin_write_MDMA_S_Y_COUNT bfin_write_MDMA_S3_Y_COUNT +#define bfin_write_MDMA_S_Y_MODIFY bfin_write_MDMA_S3_Y_MODIFY +#define bfin_write_MDMA_D_CONFIG bfin_write_MDMA_D3_CONFIG +#define bfin_write_MDMA_D_START_ADDR bfin_write_MDMA_D3_START_ADDR +#define bfin_read_MDMA_D_IRQ_STATUS bfin_read_MDMA_D3_IRQ_STATUS +#define bfin_write_MDMA_D_IRQ_STATUS bfin_write_MDMA_D3_IRQ_STATUS +#define bfin_write_MDMA_D_X_COUNT bfin_write_MDMA_D3_X_COUNT +#define bfin_write_MDMA_D_X_MODIFY bfin_write_MDMA_D3_X_MODIFY +#define bfin_write_MDMA_D_Y_COUNT bfin_write_MDMA_D3_Y_COUNT +#define bfin_write_MDMA_D_Y_MODIFY bfin_write_MDMA_D3_Y_MODIFY +#else +#define bfin_read_MDMA_S_CONFIG bfin_read_MDMA_S0_CONFIG +#define bfin_write_MDMA_S_CONFIG bfin_write_MDMA_S0_CONFIG +#define bfin_write_MDMA_S_START_ADDR bfin_write_MDMA_S0_START_ADDR +#define bfin_write_MDMA_S_IRQ_STATUS bfin_write_MDMA_S0_IRQ_STATUS +#define bfin_write_MDMA_S_X_COUNT bfin_write_MDMA_S0_X_COUNT +#define bfin_write_MDMA_S_X_MODIFY bfin_write_MDMA_S0_X_MODIFY +#define bfin_write_MDMA_S_Y_COUNT bfin_write_MDMA_S0_Y_COUNT +#define bfin_write_MDMA_S_Y_MODIFY bfin_write_MDMA_S0_Y_MODIFY +#define bfin_write_MDMA_D_CONFIG bfin_write_MDMA_D0_CONFIG +#define bfin_write_MDMA_D_START_ADDR bfin_write_MDMA_D0_START_ADDR +#define bfin_read_MDMA_D_IRQ_STATUS bfin_read_MDMA_D0_IRQ_STATUS +#define bfin_write_MDMA_D_IRQ_STATUS bfin_write_MDMA_D0_IRQ_STATUS +#define bfin_write_MDMA_D_X_COUNT bfin_write_MDMA_D0_X_COUNT +#define bfin_write_MDMA_D_X_MODIFY bfin_write_MDMA_D0_X_MODIFY +#define bfin_write_MDMA_D_Y_COUNT bfin_write_MDMA_D0_Y_COUNT +#define bfin_write_MDMA_D_Y_MODIFY bfin_write_MDMA_D0_Y_MODIFY +#endif + +/** + * __dma_memcpy - program the MDMA registers + * + * Actually program MDMA0 and wait for the transfer to finish. Disable IRQs + * while programming registers so that everything is fully configured. Wait + * for DMA to finish with IRQs enabled. If interrupted, the initial DMA_DONE + * check will make sure we don't clobber any existing transfer. + */ +static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u32 conf) +{ + static DEFINE_SPINLOCK(mdma_lock); + unsigned long flags; + + spin_lock_irqsave(&mdma_lock, flags); + + /* Force a sync in case a previous config reset on this channel + * occurred. This is needed so subsequent writes to DMA registers + * are not spuriously lost/corrupted. Do it under irq lock and + * without the anomaly version (because we are atomic already). + */ + __builtin_bfin_ssync(); + + if (bfin_read_MDMA_S_CONFIG()) + while (!(bfin_read_MDMA_D_IRQ_STATUS() & DMA_DONE)) + continue; + + if (conf & DMA2D) { + /* For larger bit sizes, we've already divided down cnt so it + * is no longer a multiple of 64k. So we have to break down + * the limit here so it is a multiple of the incoming size. + * There is no limitation here in terms of total size other + * than the hardware though as the bits lost in the shift are + * made up by MODIFY (== we can hit the whole address space). + * X: (2^(16 - 0)) * 1 == (2^(16 - 1)) * 2 == (2^(16 - 2)) * 4 + */ + u32 shift = abs(dmod) >> 1; + size_t ycnt = cnt >> (16 - shift); + cnt = 1 << (16 - shift); + bfin_write_MDMA_D_Y_COUNT(ycnt); + bfin_write_MDMA_S_Y_COUNT(ycnt); + bfin_write_MDMA_D_Y_MODIFY(dmod); + bfin_write_MDMA_S_Y_MODIFY(smod); + } + + bfin_write_MDMA_D_START_ADDR(daddr); + bfin_write_MDMA_D_X_COUNT(cnt); + bfin_write_MDMA_D_X_MODIFY(dmod); + bfin_write_MDMA_D_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S_START_ADDR(saddr); + bfin_write_MDMA_S_X_COUNT(cnt); + bfin_write_MDMA_S_X_MODIFY(smod); + bfin_write_MDMA_S_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S_CONFIG(DMAEN | conf); + if (conf & DMA2D) + bfin_write_MDMA_D_CONFIG(WNR | DI_EN_Y | DMAEN | conf); + else + bfin_write_MDMA_D_CONFIG(WNR | DI_EN_X | DMAEN | conf); + + spin_unlock_irqrestore(&mdma_lock, flags); + + SSYNC(); + + while (!(bfin_read_MDMA_D_IRQ_STATUS() & DMA_DONE)) + if (bfin_read_MDMA_S_CONFIG()) + continue; + else + return; + + bfin_write_MDMA_D_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S_CONFIG(0); + bfin_write_MDMA_D_CONFIG(0); +} + +/** + * _dma_memcpy - translate C memcpy settings into MDMA settings + * + * Handle all the high level steps before we touch the MDMA registers. So + * handle direction, tweaking of sizes, and formatting of addresses. + */ +static void *_dma_memcpy(void *pdst, const void *psrc, size_t size) +{ + u32 conf, shift; + s16 mod; + unsigned long dst = (unsigned long)pdst; + unsigned long src = (unsigned long)psrc; + + if (size == 0) + return NULL; + + if (dst % 4 == 0 && src % 4 == 0 && size % 4 == 0) { + conf = WDSIZE_32; + shift = 2; + } else if (dst % 2 == 0 && src % 2 == 0 && size % 2 == 0) { + conf = WDSIZE_16; + shift = 1; + } else { + conf = WDSIZE_8; + shift = 0; + } + + /* If the two memory regions have a chance of overlapping, make + * sure the memcpy still works as expected. Do this by having the + * copy run backwards instead. + */ + mod = 1 << shift; + if (src < dst) { + mod *= -1; + dst += size + mod; + src += size + mod; + } + size >>= shift; + +#ifndef DMA_MMR_SIZE_32 + if (size > 0x10000) + conf |= DMA2D; +#endif + + __dma_memcpy(dst, mod, src, mod, size, conf); + + return pdst; +} + +/** + * dma_memcpy - DMA memcpy under mutex lock + * + * Do not check arguments before starting the DMA memcpy. Break the transfer + * up into two pieces. The first transfer is in multiples of 64k and the + * second transfer is the piece smaller than 64k. + */ +void *dma_memcpy(void *pdst, const void *psrc, size_t size) +{ + unsigned long dst = (unsigned long)pdst; + unsigned long src = (unsigned long)psrc; + + if (bfin_addr_dcacheable(src)) + blackfin_dcache_flush_range(src, src + size); + + if (bfin_addr_dcacheable(dst)) + blackfin_dcache_invalidate_range(dst, dst + size); + + return dma_memcpy_nocache(pdst, psrc, size); +} +EXPORT_SYMBOL(dma_memcpy); + +/** + * dma_memcpy_nocache - DMA memcpy under mutex lock + * - No cache flush/invalidate + * + * Do not check arguments before starting the DMA memcpy. Break the transfer + * up into two pieces. The first transfer is in multiples of 64k and the + * second transfer is the piece smaller than 64k. + */ +void *dma_memcpy_nocache(void *pdst, const void *psrc, size_t size) +{ +#ifdef DMA_MMR_SIZE_32 + _dma_memcpy(pdst, psrc, size); +#else + size_t bulk, rest; + + bulk = size & ~0xffff; + rest = size - bulk; + if (bulk) + _dma_memcpy(pdst, psrc, bulk); + _dma_memcpy(pdst + bulk, psrc + bulk, rest); +#endif + return pdst; +} +EXPORT_SYMBOL(dma_memcpy_nocache); + +/** + * safe_dma_memcpy - DMA memcpy w/argument checking + * + * Verify arguments are safe before heading to dma_memcpy(). + */ +void *safe_dma_memcpy(void *dst, const void *src, size_t size) +{ + if (!access_ok(VERIFY_WRITE, dst, size)) + return NULL; + if (!access_ok(VERIFY_READ, src, size)) + return NULL; + return dma_memcpy(dst, src, size); +} +EXPORT_SYMBOL(safe_dma_memcpy); + +static void _dma_out(unsigned long addr, unsigned long buf, unsigned DMA_MMR_SIZE_TYPE len, + u16 size, u16 dma_size) +{ + blackfin_dcache_flush_range(buf, buf + len * size); + __dma_memcpy(addr, 0, buf, size, len, dma_size); +} + +static void _dma_in(unsigned long addr, unsigned long buf, unsigned DMA_MMR_SIZE_TYPE len, + u16 size, u16 dma_size) +{ + blackfin_dcache_invalidate_range(buf, buf + len * size); + __dma_memcpy(buf, size, addr, 0, len, dma_size); +} + +#define MAKE_DMA_IO(io, bwl, isize, dmasize, cnst) \ +void dma_##io##s##bwl(unsigned long addr, cnst void *buf, unsigned DMA_MMR_SIZE_TYPE len) \ +{ \ + _dma_##io(addr, (unsigned long)buf, len, isize, WDSIZE_##dmasize); \ +} \ +EXPORT_SYMBOL(dma_##io##s##bwl) +MAKE_DMA_IO(out, b, 1, 8, const); +MAKE_DMA_IO(in, b, 1, 8, ); +MAKE_DMA_IO(out, w, 2, 16, const); +MAKE_DMA_IO(in, w, 2, 16, ); +MAKE_DMA_IO(out, l, 4, 32, const); +MAKE_DMA_IO(in, l, 4, 32, ); -- cgit v1.2.3-54-g00ecf