From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- arch/cris/arch-v32/mach-a3/Kconfig | 110 ++++++ arch/cris/arch-v32/mach-a3/Makefile | 8 + arch/cris/arch-v32/mach-a3/arbiter.c | 634 +++++++++++++++++++++++++++++++ arch/cris/arch-v32/mach-a3/dma.c | 184 +++++++++ arch/cris/arch-v32/mach-a3/dram_init.S | 118 ++++++ arch/cris/arch-v32/mach-a3/hw_settings.S | 53 +++ arch/cris/arch-v32/mach-a3/io.c | 149 ++++++++ arch/cris/arch-v32/mach-a3/pinmux.c | 388 +++++++++++++++++++ 8 files changed, 1644 insertions(+) create mode 100644 arch/cris/arch-v32/mach-a3/Kconfig create mode 100644 arch/cris/arch-v32/mach-a3/Makefile create mode 100644 arch/cris/arch-v32/mach-a3/arbiter.c create mode 100644 arch/cris/arch-v32/mach-a3/dma.c create mode 100644 arch/cris/arch-v32/mach-a3/dram_init.S create mode 100644 arch/cris/arch-v32/mach-a3/hw_settings.S create mode 100644 arch/cris/arch-v32/mach-a3/io.c create mode 100644 arch/cris/arch-v32/mach-a3/pinmux.c (limited to 'arch/cris/arch-v32/mach-a3') diff --git a/arch/cris/arch-v32/mach-a3/Kconfig b/arch/cris/arch-v32/mach-a3/Kconfig new file mode 100644 index 000000000..87547271a --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/Kconfig @@ -0,0 +1,110 @@ +if CRIS_MACH_ARTPEC3 + +menu "Artpec-3 options" + depends on CRIS_MACH_ARTPEC3 + +config ETRAX_DRAM_VIRTUAL_BASE + hex + default "c0000000" + +config ETRAX_L2CACHE + bool + default y + +config ETRAX_SERIAL_PORTS + int + default 5 + +config ETRAX_DDR2_MRS + hex "DDR2 MRS" + default "0" + +config ETRAX_DDR2_TIMING + hex "DDR2 SDRAM timing" + default "0" + help + SDRAM timing parameters. + +config ETRAX_DDR2_CONFIG + hex "DDR2 config" + default "0" + +config ETRAX_DDR2_LATENCY + hex "DDR2 latency" + default "0" + +config ETRAX_PIO_CE0_CFG + hex "PIO CE0 configuration" + default "0" + +config ETRAX_PIO_CE1_CFG + hex "PIO CE1 configuration" + default "0" + +config ETRAX_PIO_CE2_CFG + hex "PIO CE2 configuration" + default "0" + +config ETRAX_DEF_GIO_PA_OE + hex "GIO_PA_OE" + default "00000000" + help + Configures the direction of general port A bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_GIO_PA_OUT + hex "GIO_PA_OUT" + default "00000000" + help + Configures the initial data for the general port A bits. Most + products should use 00 here. + +config ETRAX_DEF_GIO_PB_OE + hex "GIO_PB_OE" + default "000000000" + help + Configures the direction of general port B bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_GIO_PB_OUT + hex "GIO_PB_OUT" + default "000000000" + help + Configures the initial data for the general port B bits. Most + products should use 00000 here. + +config ETRAX_DEF_GIO_PC_OE + hex "GIO_PC_OE" + default "00000" + help + Configures the direction of general port C bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_GIO_PC_OUT + hex "GIO_PC_OUT" + default "00000" + help + Configures the initial data for the general port C bits. Most + products should use 00000 here. + +endmenu + +endif diff --git a/arch/cris/arch-v32/mach-a3/Makefile b/arch/cris/arch-v32/mach-a3/Makefile new file mode 100644 index 000000000..18a227196 --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux kernel. +# + +obj-y := dma.o pinmux.o io.o arbiter.o + +clean: + diff --git a/arch/cris/arch-v32/mach-a3/arbiter.c b/arch/cris/arch-v32/mach-a3/arbiter.c new file mode 100644 index 000000000..ab5c421a4 --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/arbiter.c @@ -0,0 +1,634 @@ +/* + * Memory arbiter functions. Allocates bandwidth through the + * arbiter and sets up arbiter breakpoints. + * + * The algorithm first assigns slots to the clients that has specified + * bandwidth (e.g. ethernet) and then the remaining slots are divided + * on all the active clients. + * + * Copyright (c) 2004-2007 Axis Communications AB. + * + * The artpec-3 has two arbiters. The memory hierarchy looks like this: + * + * + * CPU DMAs + * | | + * | | + * -------------- ------------------ + * | foo arbiter|----| Internal memory| + * -------------- ------------------ + * | + * -------------- + * | L2 cache | + * -------------- + * | + * h264 etc | + * | | + * | | + * -------------- + * | bar arbiter| + * -------------- + * | + * --------- + * | SDRAM | + * --------- + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define D(x) + +struct crisv32_watch_entry { + unsigned long instance; + watch_callback *cb; + unsigned long start; + unsigned long end; + int used; +}; + +#define NUMBER_OF_BP 4 +#define SDRAM_BANDWIDTH 400000000 +#define INTMEM_BANDWIDTH 400000000 +#define NBR_OF_SLOTS 64 +#define NBR_OF_REGIONS 2 +#define NBR_OF_CLIENTS 15 +#define ARBITERS 2 +#define UNASSIGNED 100 + +struct arbiter { + unsigned long instance; + int nbr_regions; + int nbr_clients; + int requested_slots[NBR_OF_REGIONS][NBR_OF_CLIENTS]; + int active_clients[NBR_OF_REGIONS][NBR_OF_CLIENTS]; +}; + +static struct crisv32_watch_entry watches[ARBITERS][NUMBER_OF_BP] = +{ + { + {regi_marb_foo_bp0}, + {regi_marb_foo_bp1}, + {regi_marb_foo_bp2}, + {regi_marb_foo_bp3} + }, + { + {regi_marb_bar_bp0}, + {regi_marb_bar_bp1}, + {regi_marb_bar_bp2}, + {regi_marb_bar_bp3} + } +}; + +struct arbiter arbiters[ARBITERS] = +{ + { /* L2 cache arbiter */ + .instance = regi_marb_foo, + .nbr_regions = 2, + .nbr_clients = 15 + }, + { /* DDR2 arbiter */ + .instance = regi_marb_bar, + .nbr_regions = 1, + .nbr_clients = 9 + } +}; + +static int max_bandwidth[NBR_OF_REGIONS] = {SDRAM_BANDWIDTH, INTMEM_BANDWIDTH}; + +DEFINE_SPINLOCK(arbiter_lock); + +static irqreturn_t +crisv32_foo_arbiter_irq(int irq, void *dev_id); +static irqreturn_t +crisv32_bar_arbiter_irq(int irq, void *dev_id); + +/* + * "I'm the arbiter, I know the score. + * From square one I'll be watching all 64." + * (memory arbiter slots, that is) + * + * Or in other words: + * Program the memory arbiter slots for "region" according to what's + * in requested_slots[] and active_clients[], while minimizing + * latency. A caller may pass a non-zero positive amount for + * "unused_slots", which must then be the unallocated, remaining + * number of slots, free to hand out to any client. + */ + +static void crisv32_arbiter_config(int arbiter, int region, int unused_slots) +{ + int slot; + int client; + int interval = 0; + + /* + * This vector corresponds to the hardware arbiter slots (see + * the hardware documentation for semantics). We initialize + * each slot with a suitable sentinel value outside the valid + * range {0 .. NBR_OF_CLIENTS - 1} and replace them with + * client indexes. Then it's fed to the hardware. + */ + s8 val[NBR_OF_SLOTS]; + + for (slot = 0; slot < NBR_OF_SLOTS; slot++) + val[slot] = -1; + + for (client = 0; client < arbiters[arbiter].nbr_clients; client++) { + int pos; + /* Allocate the requested non-zero number of slots, but + * also give clients with zero-requests one slot each + * while stocks last. We do the latter here, in client + * order. This makes sure zero-request clients are the + * first to get to any spare slots, else those slots + * could, when bandwidth is allocated close to the limit, + * all be allocated to low-index non-zero-request clients + * in the default-fill loop below. Another positive but + * secondary effect is a somewhat better spread of the + * zero-bandwidth clients in the vector, avoiding some of + * the latency that could otherwise be caused by the + * partitioning of non-zero-bandwidth clients at low + * indexes and zero-bandwidth clients at high + * indexes. (Note that this spreading can only affect the + * unallocated bandwidth.) All the above only matters for + * memory-intensive situations, of course. + */ + if (!arbiters[arbiter].requested_slots[region][client]) { + /* + * Skip inactive clients. Also skip zero-slot + * allocations in this pass when there are no known + * free slots. + */ + if (!arbiters[arbiter].active_clients[region][client] || + unused_slots <= 0) + continue; + + unused_slots--; + + /* Only allocate one slot for this client. */ + interval = NBR_OF_SLOTS; + } else + interval = NBR_OF_SLOTS / + arbiters[arbiter].requested_slots[region][client]; + + pos = 0; + while (pos < NBR_OF_SLOTS) { + if (val[pos] >= 0) + pos++; + else { + val[pos] = client; + pos += interval; + } + } + } + + client = 0; + for (slot = 0; slot < NBR_OF_SLOTS; slot++) { + /* + * Allocate remaining slots in round-robin + * client-number order for active clients. For this + * pass, we ignore requested bandwidth and previous + * allocations. + */ + if (val[slot] < 0) { + int first = client; + while (!arbiters[arbiter].active_clients[region][client]) { + client = (client + 1) % + arbiters[arbiter].nbr_clients; + if (client == first) + break; + } + val[slot] = client; + client = (client + 1) % arbiters[arbiter].nbr_clients; + } + if (arbiter == 0) { + if (region == EXT_REGION) + REG_WR_INT_VECT(marb_foo, regi_marb_foo, + rw_l2_slots, slot, val[slot]); + else if (region == INT_REGION) + REG_WR_INT_VECT(marb_foo, regi_marb_foo, + rw_intm_slots, slot, val[slot]); + } else { + REG_WR_INT_VECT(marb_bar, regi_marb_bar, + rw_ddr2_slots, slot, val[slot]); + } + } +} + +extern char _stext, _etext; + +static void crisv32_arbiter_init(void) +{ + static int initialized; + + if (initialized) + return; + + initialized = 1; + + /* + * CPU caches are always set to active, but with zero + * bandwidth allocated. It should be ok to allocate zero + * bandwidth for the caches, because DMA for other channels + * will supposedly finish, once their programmed amount is + * done, and then the caches will get access according to the + * "fixed scheme" for unclaimed slots. Though, if for some + * use-case somewhere, there's a maximum CPU latency for + * e.g. some interrupt, we have to start allocating specific + * bandwidth for the CPU caches too. + */ + arbiters[0].active_clients[EXT_REGION][11] = 1; + arbiters[0].active_clients[EXT_REGION][12] = 1; + crisv32_arbiter_config(0, EXT_REGION, 0); + crisv32_arbiter_config(0, INT_REGION, 0); + crisv32_arbiter_config(1, EXT_REGION, 0); + + if (request_irq(MEMARB_FOO_INTR_VECT, crisv32_foo_arbiter_irq, + 0, "arbiter", NULL)) + printk(KERN_ERR "Couldn't allocate arbiter IRQ\n"); + + if (request_irq(MEMARB_BAR_INTR_VECT, crisv32_bar_arbiter_irq, + 0, "arbiter", NULL)) + printk(KERN_ERR "Couldn't allocate arbiter IRQ\n"); + +#ifndef CONFIG_ETRAX_KGDB + /* Global watch for writes to kernel text segment. */ + crisv32_arbiter_watch(virt_to_phys(&_stext), &_etext - &_stext, + MARB_CLIENTS(arbiter_all_clients, arbiter_bar_all_clients), + arbiter_all_write, NULL); +#endif + + /* Set up max burst sizes by default */ + REG_WR_INT(marb_bar, regi_marb_bar, rw_h264_rd_burst, 3); + REG_WR_INT(marb_bar, regi_marb_bar, rw_h264_wr_burst, 3); + REG_WR_INT(marb_bar, regi_marb_bar, rw_ccd_burst, 3); + REG_WR_INT(marb_bar, regi_marb_bar, rw_vin_wr_burst, 3); + REG_WR_INT(marb_bar, regi_marb_bar, rw_vin_rd_burst, 3); + REG_WR_INT(marb_bar, regi_marb_bar, rw_sclr_rd_burst, 3); + REG_WR_INT(marb_bar, regi_marb_bar, rw_vout_burst, 3); + REG_WR_INT(marb_bar, regi_marb_bar, rw_sclr_fifo_burst, 3); + REG_WR_INT(marb_bar, regi_marb_bar, rw_l2cache_burst, 3); +} + +int crisv32_arbiter_allocate_bandwidth(int client, int region, + unsigned long bandwidth) +{ + int i; + int total_assigned = 0; + int total_clients = 0; + int req; + int arbiter = 0; + + crisv32_arbiter_init(); + + if (client & 0xffff0000) { + arbiter = 1; + client >>= 16; + } + + for (i = 0; i < arbiters[arbiter].nbr_clients; i++) { + total_assigned += arbiters[arbiter].requested_slots[region][i]; + total_clients += arbiters[arbiter].active_clients[region][i]; + } + + /* Avoid division by 0 for 0-bandwidth requests. */ + req = bandwidth == 0 + ? 0 : NBR_OF_SLOTS / (max_bandwidth[region] / bandwidth); + + /* + * We make sure that there are enough slots only for non-zero + * requests. Requesting 0 bandwidth *may* allocate slots, + * though if all bandwidth is allocated, such a client won't + * get any and will have to rely on getting memory access + * according to the fixed scheme that's the default when one + * of the slot-allocated clients doesn't claim their slot. + */ + if (total_assigned + req > NBR_OF_SLOTS) + return -ENOMEM; + + arbiters[arbiter].active_clients[region][client] = 1; + arbiters[arbiter].requested_slots[region][client] = req; + crisv32_arbiter_config(arbiter, region, NBR_OF_SLOTS - total_assigned); + + /* Propagate allocation from foo to bar */ + if (arbiter == 0) + crisv32_arbiter_allocate_bandwidth(8 << 16, + EXT_REGION, bandwidth); + return 0; +} + +/* + * Main entry for bandwidth deallocation. + * + * Strictly speaking, for a somewhat constant set of clients where + * each client gets a constant bandwidth and is just enabled or + * disabled (somewhat dynamically), no action is necessary here to + * avoid starvation for non-zero-allocation clients, as the allocated + * slots will just be unused. However, handing out those unused slots + * to active clients avoids needless latency if the "fixed scheme" + * would give unclaimed slots to an eager low-index client. + */ + +void crisv32_arbiter_deallocate_bandwidth(int client, int region) +{ + int i; + int total_assigned = 0; + int arbiter = 0; + + if (client & 0xffff0000) + arbiter = 1; + + arbiters[arbiter].requested_slots[region][client] = 0; + arbiters[arbiter].active_clients[region][client] = 0; + + for (i = 0; i < arbiters[arbiter].nbr_clients; i++) + total_assigned += arbiters[arbiter].requested_slots[region][i]; + + crisv32_arbiter_config(arbiter, region, NBR_OF_SLOTS - total_assigned); +} + +int crisv32_arbiter_watch(unsigned long start, unsigned long size, + unsigned long clients, unsigned long accesses, + watch_callback *cb) +{ + int i; + int arbiter; + int used[2]; + int ret = 0; + + crisv32_arbiter_init(); + + if (start > 0x80000000) { + printk(KERN_ERR "Arbiter: %lX doesn't look like a " + "physical address", start); + return -EFAULT; + } + + spin_lock(&arbiter_lock); + + if (clients & 0xffff) + used[0] = 1; + if (clients & 0xffff0000) + used[1] = 1; + + for (arbiter = 0; arbiter < ARBITERS; arbiter++) { + if (!used[arbiter]) + continue; + + for (i = 0; i < NUMBER_OF_BP; i++) { + if (!watches[arbiter][i].used) { + unsigned intr_mask; + if (arbiter) + intr_mask = REG_RD_INT(marb_bar, + regi_marb_bar, rw_intr_mask); + else + intr_mask = REG_RD_INT(marb_foo, + regi_marb_foo, rw_intr_mask); + + watches[arbiter][i].used = 1; + watches[arbiter][i].start = start; + watches[arbiter][i].end = start + size; + watches[arbiter][i].cb = cb; + + ret |= (i + 1) << (arbiter + 8); + if (arbiter) { + REG_WR_INT(marb_bar_bp, + watches[arbiter][i].instance, + rw_first_addr, + watches[arbiter][i].start); + REG_WR_INT(marb_bar_bp, + watches[arbiter][i].instance, + rw_last_addr, + watches[arbiter][i].end); + REG_WR_INT(marb_bar_bp, + watches[arbiter][i].instance, + rw_op, accesses); + REG_WR_INT(marb_bar_bp, + watches[arbiter][i].instance, + rw_clients, + clients & 0xffff); + } else { + REG_WR_INT(marb_foo_bp, + watches[arbiter][i].instance, + rw_first_addr, + watches[arbiter][i].start); + REG_WR_INT(marb_foo_bp, + watches[arbiter][i].instance, + rw_last_addr, + watches[arbiter][i].end); + REG_WR_INT(marb_foo_bp, + watches[arbiter][i].instance, + rw_op, accesses); + REG_WR_INT(marb_foo_bp, + watches[arbiter][i].instance, + rw_clients, clients >> 16); + } + + if (i == 0) + intr_mask |= 1; + else if (i == 1) + intr_mask |= 2; + else if (i == 2) + intr_mask |= 4; + else if (i == 3) + intr_mask |= 8; + + if (arbiter) + REG_WR_INT(marb_bar, regi_marb_bar, + rw_intr_mask, intr_mask); + else + REG_WR_INT(marb_foo, regi_marb_foo, + rw_intr_mask, intr_mask); + + spin_unlock(&arbiter_lock); + + break; + } + } + } + spin_unlock(&arbiter_lock); + if (ret) + return ret; + else + return -ENOMEM; +} + +int crisv32_arbiter_unwatch(int id) +{ + int arbiter; + int intr_mask; + + crisv32_arbiter_init(); + + spin_lock(&arbiter_lock); + + for (arbiter = 0; arbiter < ARBITERS; arbiter++) { + int id2; + + if (arbiter) + intr_mask = REG_RD_INT(marb_bar, regi_marb_bar, + rw_intr_mask); + else + intr_mask = REG_RD_INT(marb_foo, regi_marb_foo, + rw_intr_mask); + + id2 = (id & (0xff << (arbiter + 8))) >> (arbiter + 8); + if (id2 == 0) + continue; + id2--; + if ((id2 >= NUMBER_OF_BP) || (!watches[arbiter][id2].used)) { + spin_unlock(&arbiter_lock); + return -EINVAL; + } + + memset(&watches[arbiter][id2], 0, + sizeof(struct crisv32_watch_entry)); + + if (id2 == 0) + intr_mask &= ~1; + else if (id2 == 1) + intr_mask &= ~2; + else if (id2 == 2) + intr_mask &= ~4; + else if (id2 == 3) + intr_mask &= ~8; + + if (arbiter) + REG_WR_INT(marb_bar, regi_marb_bar, rw_intr_mask, + intr_mask); + else + REG_WR_INT(marb_foo, regi_marb_foo, rw_intr_mask, + intr_mask); + } + + spin_unlock(&arbiter_lock); + return 0; +} + +extern void show_registers(struct pt_regs *regs); + + +static irqreturn_t +crisv32_foo_arbiter_irq(int irq, void *dev_id) +{ + reg_marb_foo_r_masked_intr masked_intr = + REG_RD(marb_foo, regi_marb_foo, r_masked_intr); + reg_marb_foo_bp_r_brk_clients r_clients; + reg_marb_foo_bp_r_brk_addr r_addr; + reg_marb_foo_bp_r_brk_op r_op; + reg_marb_foo_bp_r_brk_first_client r_first; + reg_marb_foo_bp_r_brk_size r_size; + reg_marb_foo_bp_rw_ack ack = {0}; + reg_marb_foo_rw_ack_intr ack_intr = { + .bp0 = 1, .bp1 = 1, .bp2 = 1, .bp3 = 1 + }; + struct crisv32_watch_entry *watch; + unsigned arbiter = (unsigned)dev_id; + + masked_intr = REG_RD(marb_foo, regi_marb_foo, r_masked_intr); + + if (masked_intr.bp0) + watch = &watches[arbiter][0]; + else if (masked_intr.bp1) + watch = &watches[arbiter][1]; + else if (masked_intr.bp2) + watch = &watches[arbiter][2]; + else if (masked_intr.bp3) + watch = &watches[arbiter][3]; + else + return IRQ_NONE; + + /* Retrieve all useful information and print it. */ + r_clients = REG_RD(marb_foo_bp, watch->instance, r_brk_clients); + r_addr = REG_RD(marb_foo_bp, watch->instance, r_brk_addr); + r_op = REG_RD(marb_foo_bp, watch->instance, r_brk_op); + r_first = REG_RD(marb_foo_bp, watch->instance, r_brk_first_client); + r_size = REG_RD(marb_foo_bp, watch->instance, r_brk_size); + + printk(KERN_DEBUG "Arbiter IRQ\n"); + printk(KERN_DEBUG "Clients %X addr %X op %X first %X size %X\n", + REG_TYPE_CONV(int, reg_marb_foo_bp_r_brk_clients, r_clients), + REG_TYPE_CONV(int, reg_marb_foo_bp_r_brk_addr, r_addr), + REG_TYPE_CONV(int, reg_marb_foo_bp_r_brk_op, r_op), + REG_TYPE_CONV(int, reg_marb_foo_bp_r_brk_first_client, r_first), + REG_TYPE_CONV(int, reg_marb_foo_bp_r_brk_size, r_size)); + + REG_WR(marb_foo_bp, watch->instance, rw_ack, ack); + REG_WR(marb_foo, regi_marb_foo, rw_ack_intr, ack_intr); + + printk(KERN_DEBUG "IRQ occurred at %X\n", (unsigned)get_irq_regs()); + + if (watch->cb) + watch->cb(); + + return IRQ_HANDLED; +} + +static irqreturn_t +crisv32_bar_arbiter_irq(int irq, void *dev_id) +{ + reg_marb_bar_r_masked_intr masked_intr = + REG_RD(marb_bar, regi_marb_bar, r_masked_intr); + reg_marb_bar_bp_r_brk_clients r_clients; + reg_marb_bar_bp_r_brk_addr r_addr; + reg_marb_bar_bp_r_brk_op r_op; + reg_marb_bar_bp_r_brk_first_client r_first; + reg_marb_bar_bp_r_brk_size r_size; + reg_marb_bar_bp_rw_ack ack = {0}; + reg_marb_bar_rw_ack_intr ack_intr = { + .bp0 = 1, .bp1 = 1, .bp2 = 1, .bp3 = 1 + }; + struct crisv32_watch_entry *watch; + unsigned arbiter = (unsigned)dev_id; + + masked_intr = REG_RD(marb_bar, regi_marb_bar, r_masked_intr); + + if (masked_intr.bp0) + watch = &watches[arbiter][0]; + else if (masked_intr.bp1) + watch = &watches[arbiter][1]; + else if (masked_intr.bp2) + watch = &watches[arbiter][2]; + else if (masked_intr.bp3) + watch = &watches[arbiter][3]; + else + return IRQ_NONE; + + /* Retrieve all useful information and print it. */ + r_clients = REG_RD(marb_bar_bp, watch->instance, r_brk_clients); + r_addr = REG_RD(marb_bar_bp, watch->instance, r_brk_addr); + r_op = REG_RD(marb_bar_bp, watch->instance, r_brk_op); + r_first = REG_RD(marb_bar_bp, watch->instance, r_brk_first_client); + r_size = REG_RD(marb_bar_bp, watch->instance, r_brk_size); + + printk(KERN_DEBUG "Arbiter IRQ\n"); + printk(KERN_DEBUG "Clients %X addr %X op %X first %X size %X\n", + REG_TYPE_CONV(int, reg_marb_bar_bp_r_brk_clients, r_clients), + REG_TYPE_CONV(int, reg_marb_bar_bp_r_brk_addr, r_addr), + REG_TYPE_CONV(int, reg_marb_bar_bp_r_brk_op, r_op), + REG_TYPE_CONV(int, reg_marb_bar_bp_r_brk_first_client, r_first), + REG_TYPE_CONV(int, reg_marb_bar_bp_r_brk_size, r_size)); + + REG_WR(marb_bar_bp, watch->instance, rw_ack, ack); + REG_WR(marb_bar, regi_marb_bar, rw_ack_intr, ack_intr); + + printk(KERN_DEBUG "IRQ occurred at %X\n", (unsigned)get_irq_regs()->erp); + + if (watch->cb) + watch->cb(); + + return IRQ_HANDLED; +} + diff --git a/arch/cris/arch-v32/mach-a3/dma.c b/arch/cris/arch-v32/mach-a3/dma.c new file mode 100644 index 000000000..47c64bf40 --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/dma.c @@ -0,0 +1,184 @@ +/* Wrapper for DMA channel allocator that starts clocks etc */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static char used_dma_channels[MAX_DMA_CHANNELS]; +static const char *used_dma_channels_users[MAX_DMA_CHANNELS]; + +static DEFINE_SPINLOCK(dma_lock); + +int crisv32_request_dma(unsigned int dmanr, const char *device_id, + unsigned options, unsigned int bandwidth, enum dma_owner owner) +{ + unsigned long flags; + reg_clkgen_rw_clk_ctrl clk_ctrl; + reg_strmux_rw_cfg strmux_cfg; + + if (crisv32_arbiter_allocate_bandwidth(dmanr, + options & DMA_INT_MEM ? INT_REGION : EXT_REGION, + bandwidth)) + return -ENOMEM; + + spin_lock_irqsave(&dma_lock, flags); + + if (used_dma_channels[dmanr]) { + spin_unlock_irqrestore(&dma_lock, flags); + if (options & DMA_VERBOSE_ON_ERROR) + printk(KERN_ERR "Failed to request DMA %i for %s, " + "already allocated by %s\n", + dmanr, + device_id, + used_dma_channels_users[dmanr]); + + if (options & DMA_PANIC_ON_ERROR) + panic("request_dma error!"); + spin_unlock_irqrestore(&dma_lock, flags); + return -EBUSY; + } + clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl); + strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg); + + switch (dmanr) { + case 0: + case 1: + clk_ctrl.dma0_1_eth = 1; + break; + case 2: + case 3: + clk_ctrl.dma2_3_strcop = 1; + break; + case 4: + case 5: + clk_ctrl.dma4_5_iop = 1; + break; + case 6: + case 7: + clk_ctrl.sser_ser_dma6_7 = 1; + break; + case 9: + case 11: + clk_ctrl.dma9_11 = 1; + break; +#if MAX_DMA_CHANNELS-1 != 11 +#error Check dma.c +#endif + default: + spin_unlock_irqrestore(&dma_lock, flags); + if (options & DMA_VERBOSE_ON_ERROR) + printk(KERN_ERR "Failed to request DMA %i for %s, " + "only 0-%i valid)\n", + dmanr, device_id, MAX_DMA_CHANNELS-1); + + if (options & DMA_PANIC_ON_ERROR) + panic("request_dma error!"); + return -EINVAL; + } + + switch (owner) { + case dma_eth: + if (dmanr == 0) + strmux_cfg.dma0 = regk_strmux_eth; + else if (dmanr == 1) + strmux_cfg.dma1 = regk_strmux_eth; + else + panic("Invalid DMA channel for eth\n"); + break; + case dma_ser0: + if (dmanr == 0) + strmux_cfg.dma0 = regk_strmux_ser0; + else if (dmanr == 1) + strmux_cfg.dma1 = regk_strmux_ser0; + else + panic("Invalid DMA channel for ser0\n"); + break; + case dma_ser3: + if (dmanr == 2) + strmux_cfg.dma2 = regk_strmux_ser3; + else if (dmanr == 3) + strmux_cfg.dma3 = regk_strmux_ser3; + else + panic("Invalid DMA channel for ser3\n"); + break; + case dma_strp: + if (dmanr == 2) + strmux_cfg.dma2 = regk_strmux_strcop; + else if (dmanr == 3) + strmux_cfg.dma3 = regk_strmux_strcop; + else + panic("Invalid DMA channel for strp\n"); + break; + case dma_ser1: + if (dmanr == 4) + strmux_cfg.dma4 = regk_strmux_ser1; + else if (dmanr == 5) + strmux_cfg.dma5 = regk_strmux_ser1; + else + panic("Invalid DMA channel for ser1\n"); + break; + case dma_iop: + if (dmanr == 4) + strmux_cfg.dma4 = regk_strmux_iop; + else if (dmanr == 5) + strmux_cfg.dma5 = regk_strmux_iop; + else + panic("Invalid DMA channel for iop\n"); + break; + case dma_ser2: + if (dmanr == 6) + strmux_cfg.dma6 = regk_strmux_ser2; + else if (dmanr == 7) + strmux_cfg.dma7 = regk_strmux_ser2; + else + panic("Invalid DMA channel for ser2\n"); + break; + case dma_sser: + if (dmanr == 6) + strmux_cfg.dma6 = regk_strmux_sser; + else if (dmanr == 7) + strmux_cfg.dma7 = regk_strmux_sser; + else + panic("Invalid DMA channel for sser\n"); + break; + case dma_ser4: + if (dmanr == 9) + strmux_cfg.dma9 = regk_strmux_ser4; + else + panic("Invalid DMA channel for ser4\n"); + break; + case dma_jpeg: + if (dmanr == 9) + strmux_cfg.dma9 = regk_strmux_jpeg; + else + panic("Invalid DMA channel for JPEG\n"); + break; + case dma_h264: + if (dmanr == 11) + strmux_cfg.dma11 = regk_strmux_h264; + else + panic("Invalid DMA channel for H264\n"); + break; + } + + used_dma_channels[dmanr] = 1; + used_dma_channels_users[dmanr] = device_id; + REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl); + REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg); + spin_unlock_irqrestore(&dma_lock, flags); + return 0; +} + +void crisv32_free_dma(unsigned int dmanr) +{ + spin_lock(&dma_lock); + used_dma_channels[dmanr] = 0; + spin_unlock(&dma_lock); +} diff --git a/arch/cris/arch-v32/mach-a3/dram_init.S b/arch/cris/arch-v32/mach-a3/dram_init.S new file mode 100644 index 000000000..ec8648be3 --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/dram_init.S @@ -0,0 +1,118 @@ +/* + * DDR SDRAM initialization - alter with care + * This file is intended to be included from other assembler files + * + * Note: This file may not modify r8 or r9 because they are used to + * carry information from the decompresser to the kernel + * + * Copyright (C) 2005-2007 Axis Communications AB + * + * Authors: Mikael Starvik + */ + +/* Just to be certain the config file is included, we include it here + * explicitely instead of depending on it being included in the file that + * uses this code. + */ + +#include +#include + + ;; WARNING! The registers r8 and r9 are used as parameters carrying + ;; information from the decompressor (if the kernel was compressed). + ;; They should not be used in the code below. + + ;; Refer to ddr2 MDS for initialization sequence + + ; 2. Wait 200us + move.d 10000, $r2 +1: bne 1b + subq 1, $r2 + + ; Start clock + move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_cfg), $r0 + move.d REG_STATE(ddr2, rw_phy_cfg, en, yes), $r1 + move.d $r1, [$r0] + + ; 2. Wait 200us + move.d 10000, $r2 +1: bne 1b + subq 1, $r2 + + ; Reset phy and start calibration + move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_ctrl), $r0 + move.d REG_STATE(ddr2, rw_phy_ctrl, rst, yes) | \ + REG_STATE(ddr2, rw_phy_ctrl, cal_rst, yes), $r1 + move.d $r1, [$r0] + move.d REG_STATE(ddr2, rw_phy_ctrl, cal_start, yes), $r1 + move.d $r1, [$r0] + + ; 2. Wait 200us + move.d 10000, $r2 +1: bne 1b + subq 1, $r2 + + ; Issue commands + move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_ctrl), $r0 + move.d sdram_commands_start, $r2 +command_loop: + movu.b [$r2+], $r1 + movu.w [$r2+], $r3 +do_cmd: + lslq 16, $r1 + or.d $r3, $r1 + move.d $r1, [$r0] + ; 2. Wait 200us + move.d 10000, $r4 +1: bne 1b + subq 1, $r4 + cmp.d sdram_commands_end, $r2 + blo command_loop + nop + + ; Set timing + move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_timing), $r0 + move.d CONFIG_ETRAX_DDR2_TIMING, $r1 + move.d $r1, [$r0] + + ; Set latency + move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_latency), $r0 + move.d CONFIG_ETRAX_DDR2_LATENCY, $r1 + move.d $r1, [$r0] + + ; Set configuration + move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_cfg), $r0 + move.d CONFIG_ETRAX_DDR2_CONFIG, $r1 + move.d $r1, [$r0] + + ba after_sdram_commands + nop + +sdram_commands_start: + .byte regk_ddr2_deselect + .word 0 + .byte regk_ddr2_pre + .word regk_ddr2_pre_all + .byte regk_ddr2_emrs2 + .word 0 + .byte regk_ddr2_emrs3 + .word 0 + .byte regk_ddr2_emrs + .word regk_ddr2_dll_en + .byte regk_ddr2_mrs + .word regk_ddr2_dll_rst + .byte regk_ddr2_pre + .word regk_ddr2_pre_all + .byte regk_ddr2_ref + .word 0 + .byte regk_ddr2_ref + .word 0 + .byte regk_ddr2_mrs + .word CONFIG_ETRAX_DDR2_MRS & 0xffff + .byte regk_ddr2_emrs + .word regk_ddr2_ocd_default | regk_ddr2_dll_en + .byte regk_ddr2_emrs + .word regk_ddr2_ocd_exit | regk_ddr2_dll_en | (CONFIG_ETRAX_DDR2_MRS >> 16) +sdram_commands_end: + .align 1 +after_sdram_commands: diff --git a/arch/cris/arch-v32/mach-a3/hw_settings.S b/arch/cris/arch-v32/mach-a3/hw_settings.S new file mode 100644 index 000000000..0145725a1 --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/hw_settings.S @@ -0,0 +1,53 @@ +/* + * This table is used by some tools to extract hardware parameters. + * The table should be included in the kernel and the decompressor. + * Don't forget to update the tools if you change this table. + * + * Copyright (C) 2001-2007 Axis Communications AB + * + * Authors: Mikael Starvik + */ + +#include +#include +#include + + .ascii "HW_PARAM_MAGIC" ; Magic number + .dword 0xc0004000 ; Kernel start address + + ; Debug port +#ifdef CONFIG_ETRAX_DEBUG_PORT0 + .dword 0 +#elif defined(CONFIG_ETRAX_DEBUG_PORT1) + .dword 1 +#elif defined(CONFIG_ETRAX_DEBUG_PORT2) + .dword 2 +#elif defined(CONFIG_ETRAX_DEBUG_PORT3) + .dword 3 +#else + .dword 4 ; No debug +#endif + + ; Register values + .dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_cfg) + .dword CONFIG_ETRAX_DDR2_CONFIG + .dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_latency) + .dword CONFIG_ETRAX_DDR2_LATENCY + .dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_timing) + .dword CONFIG_ETRAX_DDR2_TIMING + .dword CONFIG_ETRAX_DDR2_MRS + + .dword REG_ADDR(gio, regi_gio, rw_pa_dout) + .dword CONFIG_ETRAX_DEF_GIO_PA_OUT + .dword REG_ADDR(gio, regi_gio, rw_pa_oe) + .dword CONFIG_ETRAX_DEF_GIO_PA_OE + .dword REG_ADDR(gio, regi_gio, rw_pb_dout) + .dword CONFIG_ETRAX_DEF_GIO_PB_OUT + .dword REG_ADDR(gio, regi_gio, rw_pb_oe) + .dword CONFIG_ETRAX_DEF_GIO_PB_OE + .dword REG_ADDR(gio, regi_gio, rw_pc_dout) + .dword CONFIG_ETRAX_DEF_GIO_PC_OUT + .dword REG_ADDR(gio, regi_gio, rw_pc_oe) + .dword CONFIG_ETRAX_DEF_GIO_PC_OE + + .dword 0 ; No more register values diff --git a/arch/cris/arch-v32/mach-a3/io.c b/arch/cris/arch-v32/mach-a3/io.c new file mode 100644 index 000000000..090ceb99e --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/io.c @@ -0,0 +1,149 @@ +/* + * Helper functions for I/O pins. + * + * Copyright (c) 2005-2007 Axis Communications AB. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct crisv32_ioport crisv32_ioports[] = { + { + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_oe), + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_dout), + (unsigned long *)REG_ADDR(gio, regi_gio, r_pa_din), + 32 + }, + { + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_oe), + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_dout), + (unsigned long *)REG_ADDR(gio, regi_gio, r_pb_din), + 32 + }, + { + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_oe), + (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_dout), + (unsigned long *)REG_ADDR(gio, regi_gio, r_pc_din), + 16 + }, +}; + +#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports) + +struct crisv32_iopin crisv32_led_net0_green; +struct crisv32_iopin crisv32_led_net0_red; +struct crisv32_iopin crisv32_led2_green; +struct crisv32_iopin crisv32_led2_red; +struct crisv32_iopin crisv32_led3_green; +struct crisv32_iopin crisv32_led3_red; + +/* Dummy port used when green LED and red LED is on the same bit */ +static unsigned long io_dummy; +static struct crisv32_ioport dummy_port = { + &io_dummy, + &io_dummy, + &io_dummy, + 32 +}; +static struct crisv32_iopin dummy_led = { + &dummy_port, + 0 +}; + +static int __init crisv32_io_init(void) +{ + int ret = 0; + + u32 i; + + /* Locks *should* be dynamically initialized. */ + for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++) + spin_lock_init(&crisv32_ioports[i].lock); + spin_lock_init(&dummy_port.lock); + + /* Initialize LEDs */ +#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) + ret += crisv32_io_get_name(&crisv32_led_net0_green, + CONFIG_ETRAX_LED_G_NET0); + crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out); + if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) { + ret += crisv32_io_get_name(&crisv32_led_net0_red, + CONFIG_ETRAX_LED_R_NET0); + crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out); + } else + crisv32_led_net0_red = dummy_led; +#endif + + ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_V32_LED2G); + ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_V32_LED2R); + ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_V32_LED3G); + ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_V32_LED3R); + + crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out); + + return ret; +} + +__initcall(crisv32_io_init); + +int crisv32_io_get(struct crisv32_iopin *iopin, + unsigned int port, unsigned int pin) +{ + if (port > NBR_OF_PORTS) + return -EINVAL; + if (port > crisv32_ioports[port].pin_count) + return -EINVAL; + + iopin->bit = 1 << pin; + iopin->port = &crisv32_ioports[port]; + + if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio)) + return -EIO; + + return 0; +} + +int crisv32_io_get_name(struct crisv32_iopin *iopin, const char *name) +{ + int port; + int pin; + + if (toupper(*name) == 'P') + name++; + + if (toupper(*name) < 'A' || toupper(*name) > 'E') + return -EINVAL; + + port = toupper(*name) - 'A'; + name++; + pin = simple_strtoul(name, NULL, 10); + + if (pin < 0 || pin > crisv32_ioports[port].pin_count) + return -EINVAL; + + iopin->bit = 1 << pin; + iopin->port = &crisv32_ioports[port]; + + if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio)) + return -EIO; + + return 0; +} + +#ifdef CONFIG_PCI +/* PCI I/O access stuff */ +struct cris_io_operations *cris_iops = NULL; +EXPORT_SYMBOL(cris_iops); +#endif + diff --git a/arch/cris/arch-v32/mach-a3/pinmux.c b/arch/cris/arch-v32/mach-a3/pinmux.c new file mode 100644 index 000000000..591f77526 --- /dev/null +++ b/arch/cris/arch-v32/mach-a3/pinmux.c @@ -0,0 +1,388 @@ +/* + * Allocator for I/O pins. All pins are allocated to GPIO at bootup. + * Unassigned pins and GPIO pins can be allocated to a fixed interface + * or the I/O processor instead. + * + * Copyright (c) 2005-2007 Axis Communications AB. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#undef DEBUG + +#define PINS 80 +#define PORT_PINS 32 +#define PORTS 3 + +static char pins[PINS]; +static DEFINE_SPINLOCK(pinmux_lock); + +static void crisv32_pinmux_set(int port); + +int +crisv32_pinmux_init(void) +{ + static int initialized; + + if (!initialized) { + initialized = 1; + REG_WR_INT(pinmux, regi_pinmux, rw_hwprot, 0); + crisv32_pinmux_alloc(PORT_A, 0, 31, pinmux_gpio); + crisv32_pinmux_alloc(PORT_B, 0, 31, pinmux_gpio); + crisv32_pinmux_alloc(PORT_C, 0, 15, pinmux_gpio); + } + + return 0; +} + +int +crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode) +{ + int i; + unsigned long flags; + + crisv32_pinmux_init(); + + if (port >= PORTS) + return -EINVAL; + + spin_lock_irqsave(&pinmux_lock, flags); + + for (i = first_pin; i <= last_pin; i++) { + if ((pins[port * PORT_PINS + i] != pinmux_none) && + (pins[port * PORT_PINS + i] != pinmux_gpio) && + (pins[port * PORT_PINS + i] != mode)) { + spin_unlock_irqrestore(&pinmux_lock, flags); +#ifdef DEBUG + panic("Pinmux alloc failed!\n"); +#endif + return -EPERM; + } + } + + for (i = first_pin; i <= last_pin; i++) + pins[port * PORT_PINS + i] = mode; + + crisv32_pinmux_set(port); + + spin_unlock_irqrestore(&pinmux_lock, flags); + + return 0; +} + +int +crisv32_pinmux_alloc_fixed(enum fixed_function function) +{ + int ret = -EINVAL; + char saved[sizeof pins]; + unsigned long flags; + reg_pinmux_rw_hwprot hwprot; + reg_clkgen_rw_clk_ctrl clk_ctrl; + + spin_lock_irqsave(&pinmux_lock, flags); + + /* Save internal data for recovery */ + memcpy(saved, pins, sizeof pins); + + crisv32_pinmux_init(); /* must be done before we read rw_hwprot */ + + hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); + clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl); + + switch (function) { + case pinmux_eth: + clk_ctrl.eth = regk_clkgen_yes; + clk_ctrl.dma0_1_eth = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_B, 8, 23, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_B, 24, 25, pinmux_fixed); + hwprot.eth = hwprot.eth_mdio = regk_pinmux_yes; + break; + case pinmux_geth: + ret = crisv32_pinmux_alloc(PORT_B, 0, 7, pinmux_fixed); + hwprot.geth = regk_pinmux_yes; + break; + case pinmux_tg_cmos: + clk_ctrl.ccd_tg_100 = clk_ctrl.ccd_tg_200 = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_B, 27, 29, pinmux_fixed); + hwprot.tg_clk = regk_pinmux_yes; + break; + case pinmux_tg_ccd: + clk_ctrl.ccd_tg_100 = clk_ctrl.ccd_tg_200 = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_B, 27, 31, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_C, 0, 15, pinmux_fixed); + hwprot.tg = hwprot.tg_clk = regk_pinmux_yes; + break; + case pinmux_vout: + clk_ctrl.strdma0_2_video = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_A, 8, 18, pinmux_fixed); + hwprot.vout = hwprot.vout_sync = regk_pinmux_yes; + break; + case pinmux_ser1: + clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_A, 24, 25, pinmux_fixed); + hwprot.ser1 = regk_pinmux_yes; + break; + case pinmux_ser2: + clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_A, 26, 27, pinmux_fixed); + hwprot.ser2 = regk_pinmux_yes; + break; + case pinmux_ser3: + clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_A, 28, 29, pinmux_fixed); + hwprot.ser3 = regk_pinmux_yes; + break; + case pinmux_ser4: + clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_A, 30, 31, pinmux_fixed); + hwprot.ser4 = regk_pinmux_yes; + break; + case pinmux_sser: + clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes; + ret = crisv32_pinmux_alloc(PORT_A, 19, 23, pinmux_fixed); + hwprot.sser = regk_pinmux_yes; + break; + case pinmux_pio: + hwprot.pio = regk_pinmux_yes; + ret = 0; + break; + case pinmux_pwm0: + ret = crisv32_pinmux_alloc(PORT_A, 30, 30, pinmux_fixed); + hwprot.pwm0 = regk_pinmux_yes; + break; + case pinmux_pwm1: + ret = crisv32_pinmux_alloc(PORT_A, 31, 31, pinmux_fixed); + hwprot.pwm1 = regk_pinmux_yes; + break; + case pinmux_pwm2: + ret = crisv32_pinmux_alloc(PORT_B, 26, 26, pinmux_fixed); + hwprot.pwm2 = regk_pinmux_yes; + break; + case pinmux_i2c0: + ret = crisv32_pinmux_alloc(PORT_A, 0, 1, pinmux_fixed); + hwprot.i2c0 = regk_pinmux_yes; + break; + case pinmux_i2c1: + ret = crisv32_pinmux_alloc(PORT_A, 2, 3, pinmux_fixed); + hwprot.i2c1 = regk_pinmux_yes; + break; + case pinmux_i2c1_3wire: + ret = crisv32_pinmux_alloc(PORT_A, 2, 3, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_A, 7, 7, pinmux_fixed); + hwprot.i2c1 = hwprot.i2c1_sen = regk_pinmux_yes; + break; + case pinmux_i2c1_sda1: + ret = crisv32_pinmux_alloc(PORT_A, 2, 4, pinmux_fixed); + hwprot.i2c1 = hwprot.i2c1_sda1 = regk_pinmux_yes; + break; + case pinmux_i2c1_sda2: + ret = crisv32_pinmux_alloc(PORT_A, 2, 3, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_A, 5, 5, pinmux_fixed); + hwprot.i2c1 = hwprot.i2c1_sda2 = regk_pinmux_yes; + break; + case pinmux_i2c1_sda3: + ret = crisv32_pinmux_alloc(PORT_A, 2, 3, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_A, 6, 6, pinmux_fixed); + hwprot.i2c1 = hwprot.i2c1_sda3 = regk_pinmux_yes; + break; + default: + ret = -EINVAL; + break; + } + + if (!ret) { + REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); + REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl); + } else + memcpy(pins, saved, sizeof pins); + + spin_unlock_irqrestore(&pinmux_lock, flags); + + return ret; +} + +void +crisv32_pinmux_set(int port) +{ + int i; + int gpio_val = 0; + int iop_val = 0; + int pin = port * PORT_PINS; + + for (i = 0; (i < PORT_PINS) && (pin < PINS); i++, pin++) { + if (pins[pin] == pinmux_gpio) + gpio_val |= (1 << i); + else if (pins[pin] == pinmux_iop) + iop_val |= (1 << i); + } + + REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_gio_pa + 4 * port, + gpio_val); + REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_iop_pa + 4 * port, + iop_val); + +#ifdef DEBUG + crisv32_pinmux_dump(); +#endif +} + +int +crisv32_pinmux_dealloc(int port, int first_pin, int last_pin) +{ + int i; + unsigned long flags; + + crisv32_pinmux_init(); + + if (port > PORTS || port < 0) + return -EINVAL; + + spin_lock_irqsave(&pinmux_lock, flags); + + for (i = first_pin; i <= last_pin; i++) + pins[port * PORT_PINS + i] = pinmux_none; + + crisv32_pinmux_set(port); + spin_unlock_irqrestore(&pinmux_lock, flags); + + return 0; +} + +int +crisv32_pinmux_dealloc_fixed(enum fixed_function function) +{ + int ret = -EINVAL; + char saved[sizeof pins]; + unsigned long flags; + reg_pinmux_rw_hwprot hwprot; + + spin_lock_irqsave(&pinmux_lock, flags); + + /* Save internal data for recovery */ + memcpy(saved, pins, sizeof pins); + + crisv32_pinmux_init(); /* must be done before we read rw_hwprot */ + + hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); + + switch (function) { + case pinmux_eth: + ret = crisv32_pinmux_dealloc(PORT_B, 8, 23); + ret |= crisv32_pinmux_dealloc(PORT_B, 24, 25); + ret |= crisv32_pinmux_dealloc(PORT_B, 0, 7); + hwprot.eth = hwprot.eth_mdio = hwprot.geth = regk_pinmux_no; + break; + case pinmux_tg_cmos: + ret = crisv32_pinmux_dealloc(PORT_B, 27, 29); + hwprot.tg_clk = regk_pinmux_no; + break; + case pinmux_tg_ccd: + ret = crisv32_pinmux_dealloc(PORT_B, 27, 31); + ret |= crisv32_pinmux_dealloc(PORT_C, 0, 15); + hwprot.tg = hwprot.tg_clk = regk_pinmux_no; + break; + case pinmux_vout: + ret = crisv32_pinmux_dealloc(PORT_A, 8, 18); + hwprot.vout = hwprot.vout_sync = regk_pinmux_no; + break; + case pinmux_ser1: + ret = crisv32_pinmux_dealloc(PORT_A, 24, 25); + hwprot.ser1 = regk_pinmux_no; + break; + case pinmux_ser2: + ret = crisv32_pinmux_dealloc(PORT_A, 26, 27); + hwprot.ser2 = regk_pinmux_no; + break; + case pinmux_ser3: + ret = crisv32_pinmux_dealloc(PORT_A, 28, 29); + hwprot.ser3 = regk_pinmux_no; + break; + case pinmux_ser4: + ret = crisv32_pinmux_dealloc(PORT_A, 30, 31); + hwprot.ser4 = regk_pinmux_no; + break; + case pinmux_sser: + ret = crisv32_pinmux_dealloc(PORT_A, 19, 23); + hwprot.sser = regk_pinmux_no; + break; + case pinmux_pwm0: + ret = crisv32_pinmux_dealloc(PORT_A, 30, 30); + hwprot.pwm0 = regk_pinmux_no; + break; + case pinmux_pwm1: + ret = crisv32_pinmux_dealloc(PORT_A, 31, 31); + hwprot.pwm1 = regk_pinmux_no; + break; + case pinmux_pwm2: + ret = crisv32_pinmux_dealloc(PORT_B, 26, 26); + hwprot.pwm2 = regk_pinmux_no; + break; + case pinmux_i2c0: + ret = crisv32_pinmux_dealloc(PORT_A, 0, 1); + hwprot.i2c0 = regk_pinmux_no; + break; + case pinmux_i2c1: + ret = crisv32_pinmux_dealloc(PORT_A, 2, 3); + hwprot.i2c1 = regk_pinmux_no; + break; + case pinmux_i2c1_3wire: + ret = crisv32_pinmux_dealloc(PORT_A, 2, 3); + ret |= crisv32_pinmux_dealloc(PORT_A, 7, 7); + hwprot.i2c1 = hwprot.i2c1_sen = regk_pinmux_no; + break; + case pinmux_i2c1_sda1: + ret = crisv32_pinmux_dealloc(PORT_A, 2, 4); + hwprot.i2c1_sda1 = regk_pinmux_no; + break; + case pinmux_i2c1_sda2: + ret = crisv32_pinmux_dealloc(PORT_A, 2, 3); + ret |= crisv32_pinmux_dealloc(PORT_A, 5, 5); + hwprot.i2c1_sda2 = regk_pinmux_no; + break; + case pinmux_i2c1_sda3: + ret = crisv32_pinmux_dealloc(PORT_A, 2, 3); + ret |= crisv32_pinmux_dealloc(PORT_A, 6, 6); + hwprot.i2c1_sda3 = regk_pinmux_no; + break; + default: + ret = -EINVAL; + break; + } + + if (!ret) + REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); + else + memcpy(pins, saved, sizeof pins); + + spin_unlock_irqrestore(&pinmux_lock, flags); + + return ret; +} + +void +crisv32_pinmux_dump(void) +{ + int i, j; + int pin = 0; + + crisv32_pinmux_init(); + + for (i = 0; i < PORTS; i++) { + pin++; + printk(KERN_DEBUG "Port %c\n", 'A'+i); + for (j = 0; (j < PORT_PINS) && (pin < PINS); j++, pin++) + printk(KERN_DEBUG + " Pin %d = %d\n", j, pins[i * PORT_PINS + j]); + } +} + +__initcall(crisv32_pinmux_init); -- cgit v1.2.3-54-g00ecf