From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- arch/ia64/sn/kernel/bte_error.c | 260 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 260 insertions(+) create mode 100644 arch/ia64/sn/kernel/bte_error.c (limited to 'arch/ia64/sn/kernel/bte_error.c') diff --git a/arch/ia64/sn/kernel/bte_error.c b/arch/ia64/sn/kernel/bte_error.c new file mode 100644 index 000000000..4cb09f3f1 --- /dev/null +++ b/arch/ia64/sn/kernel/bte_error.c @@ -0,0 +1,260 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved. + */ + +#include +#include +#include "ioerror.h" +#include +#include +#include +#include "xtalk/xwidgetdev.h" +#include "xtalk/hubdev.h" +#include +#include + +/* + * Bte error handling is done in two parts. The first captures + * any crb related errors. Since there can be multiple crbs per + * interface and multiple interfaces active, we need to wait until + * all active crbs are completed. This is the first job of the + * second part error handler. When all bte related CRBs are cleanly + * completed, it resets the interfaces and gets them ready for new + * transfers to be queued. + */ + +void bte_error_handler(unsigned long); + +/* + * Wait until all BTE related CRBs are completed + * and then reset the interfaces. + */ +int shub1_bte_error_handler(unsigned long _nodepda) +{ + struct nodepda_s *err_nodepda = (struct nodepda_s *)_nodepda; + struct timer_list *recovery_timer = &err_nodepda->bte_recovery_timer; + nasid_t nasid; + int i; + int valid_crbs; + ii_imem_u_t imem; /* II IMEM Register */ + ii_icrb0_d_u_t icrbd; /* II CRB Register D */ + ii_ibcr_u_t ibcr; + ii_icmr_u_t icmr; + ii_ieclr_u_t ieclr; + + BTE_PRINTK(("shub1_bte_error_handler(%p) - %d\n", err_nodepda, + smp_processor_id())); + + if ((err_nodepda->bte_if[0].bh_error == BTE_SUCCESS) && + (err_nodepda->bte_if[1].bh_error == BTE_SUCCESS)) { + BTE_PRINTK(("eh:%p:%d Nothing to do.\n", err_nodepda, + smp_processor_id())); + return 1; + } + + /* Determine information about our hub */ + nasid = cnodeid_to_nasid(err_nodepda->bte_if[0].bte_cnode); + + /* + * A BTE transfer can use multiple CRBs. We need to make sure + * that all the BTE CRBs are complete (or timed out) before + * attempting to clean up the error. Resetting the BTE while + * there are still BTE CRBs active will hang the BTE. + * We should look at all the CRBs to see if they are allocated + * to the BTE and see if they are still active. When none + * are active, we can continue with the cleanup. + * + * We also want to make sure that the local NI port is up. + * When a router resets the NI port can go down, while it + * goes through the LLP handshake, but then comes back up. + */ + icmr.ii_icmr_regval = REMOTE_HUB_L(nasid, IIO_ICMR); + if (icmr.ii_icmr_fld_s.i_crb_mark != 0) { + /* + * There are errors which still need to be cleaned up by + * hubiio_crb_error_handler + */ + mod_timer(recovery_timer, jiffies + (HZ * 5)); + BTE_PRINTK(("eh:%p:%d Marked Giving up\n", err_nodepda, + smp_processor_id())); + return 1; + } + if (icmr.ii_icmr_fld_s.i_crb_vld != 0) { + + valid_crbs = icmr.ii_icmr_fld_s.i_crb_vld; + + for (i = 0; i < IIO_NUM_CRBS; i++) { + if (!((1 << i) & valid_crbs)) { + /* This crb was not marked as valid, ignore */ + continue; + } + icrbd.ii_icrb0_d_regval = + REMOTE_HUB_L(nasid, IIO_ICRB_D(i)); + if (icrbd.d_bteop) { + mod_timer(recovery_timer, jiffies + (HZ * 5)); + BTE_PRINTK(("eh:%p:%d Valid %d, Giving up\n", + err_nodepda, smp_processor_id(), + i)); + return 1; + } + } + } + + BTE_PRINTK(("eh:%p:%d Cleaning up\n", err_nodepda, smp_processor_id())); + /* Re-enable both bte interfaces */ + imem.ii_imem_regval = REMOTE_HUB_L(nasid, IIO_IMEM); + imem.ii_imem_fld_s.i_b0_esd = imem.ii_imem_fld_s.i_b1_esd = 1; + REMOTE_HUB_S(nasid, IIO_IMEM, imem.ii_imem_regval); + + /* Clear BTE0/1 error bits */ + ieclr.ii_ieclr_regval = 0; + if (err_nodepda->bte_if[0].bh_error != BTE_SUCCESS) + ieclr.ii_ieclr_fld_s.i_e_bte_0 = 1; + if (err_nodepda->bte_if[1].bh_error != BTE_SUCCESS) + ieclr.ii_ieclr_fld_s.i_e_bte_1 = 1; + REMOTE_HUB_S(nasid, IIO_IECLR, ieclr.ii_ieclr_regval); + + /* Reinitialize both BTE state machines. */ + ibcr.ii_ibcr_regval = REMOTE_HUB_L(nasid, IIO_IBCR); + ibcr.ii_ibcr_fld_s.i_soft_reset = 1; + REMOTE_HUB_S(nasid, IIO_IBCR, ibcr.ii_ibcr_regval); + + del_timer(recovery_timer); + return 0; +} + +/* + * Wait until all BTE related CRBs are completed + * and then reset the interfaces. + */ +int shub2_bte_error_handler(unsigned long _nodepda) +{ + struct nodepda_s *err_nodepda = (struct nodepda_s *)_nodepda; + struct timer_list *recovery_timer = &err_nodepda->bte_recovery_timer; + struct bteinfo_s *bte; + nasid_t nasid; + u64 status; + int i; + + nasid = cnodeid_to_nasid(err_nodepda->bte_if[0].bte_cnode); + + /* + * Verify that all the BTEs are complete + */ + for (i = 0; i < BTES_PER_NODE; i++) { + bte = &err_nodepda->bte_if[i]; + status = BTE_LNSTAT_LOAD(bte); + if (status & IBLS_ERROR) { + bte->bh_error = BTE_SHUB2_ERROR(status); + continue; + } + if (!(status & IBLS_BUSY)) + continue; + mod_timer(recovery_timer, jiffies + (HZ * 5)); + BTE_PRINTK(("eh:%p:%d Marked Giving up\n", err_nodepda, + smp_processor_id())); + return 1; + } + if (ia64_sn_bte_recovery(nasid)) + panic("bte_error_handler(): Fatal BTE Error"); + + del_timer(recovery_timer); + return 0; +} + +/* + * Wait until all BTE related CRBs are completed + * and then reset the interfaces. + */ +void bte_error_handler(unsigned long _nodepda) +{ + struct nodepda_s *err_nodepda = (struct nodepda_s *)_nodepda; + spinlock_t *recovery_lock = &err_nodepda->bte_recovery_lock; + int i; + unsigned long irq_flags; + volatile u64 *notify; + bte_result_t bh_error; + + BTE_PRINTK(("bte_error_handler(%p) - %d\n", err_nodepda, + smp_processor_id())); + + spin_lock_irqsave(recovery_lock, irq_flags); + + /* + * Lock all interfaces on this node to prevent new transfers + * from being queued. + */ + for (i = 0; i < BTES_PER_NODE; i++) { + if (err_nodepda->bte_if[i].cleanup_active) { + continue; + } + spin_lock(&err_nodepda->bte_if[i].spinlock); + BTE_PRINTK(("eh:%p:%d locked %d\n", err_nodepda, + smp_processor_id(), i)); + err_nodepda->bte_if[i].cleanup_active = 1; + } + + if (is_shub1()) { + if (shub1_bte_error_handler(_nodepda)) { + spin_unlock_irqrestore(recovery_lock, irq_flags); + return; + } + } else { + if (shub2_bte_error_handler(_nodepda)) { + spin_unlock_irqrestore(recovery_lock, irq_flags); + return; + } + } + + for (i = 0; i < BTES_PER_NODE; i++) { + bh_error = err_nodepda->bte_if[i].bh_error; + if (bh_error != BTE_SUCCESS) { + /* There is an error which needs to be notified */ + notify = err_nodepda->bte_if[i].most_rcnt_na; + BTE_PRINTK(("cnode %d bte %d error=0x%lx\n", + err_nodepda->bte_if[i].bte_cnode, + err_nodepda->bte_if[i].bte_num, + IBLS_ERROR | (u64) bh_error)); + *notify = IBLS_ERROR | bh_error; + err_nodepda->bte_if[i].bh_error = BTE_SUCCESS; + } + + err_nodepda->bte_if[i].cleanup_active = 0; + BTE_PRINTK(("eh:%p:%d Unlocked %d\n", err_nodepda, + smp_processor_id(), i)); + spin_unlock(&err_nodepda->bte_if[i].spinlock); + } + + spin_unlock_irqrestore(recovery_lock, irq_flags); +} + +/* + * First part error handler. This is called whenever any error CRB interrupt + * is generated by the II. + */ +void +bte_crb_error_handler(cnodeid_t cnode, int btenum, + int crbnum, ioerror_t * ioe, int bteop) +{ + struct bteinfo_s *bte; + + + bte = &(NODEPDA(cnode)->bte_if[btenum]); + + /* + * The caller has already figured out the error type, we save that + * in the bte handle structure for the thread exercising the + * interface to consume. + */ + bte->bh_error = ioe->ie_errortype + BTEFAIL_OFFSET; + bte->bte_error_count++; + + BTE_PRINTK(("Got an error on cnode %d bte %d: HW error type 0x%x\n", + bte->bte_cnode, bte->bte_num, ioe->ie_errortype)); + bte_error_handler((unsigned long) NODEPDA(cnode)); +} + -- cgit v1.2.3-54-g00ecf