From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- arch/m68k/Kconfig.devices | 144 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 144 insertions(+) create mode 100644 arch/m68k/Kconfig.devices (limited to 'arch/m68k/Kconfig.devices') diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices new file mode 100644 index 000000000..42b6fcfc3 --- /dev/null +++ b/arch/m68k/Kconfig.devices @@ -0,0 +1,144 @@ +if MMU + +config ARCH_MAY_HAVE_PC_FDC + bool + depends on BROKEN && (Q40 || SUN3X) + default y + +menu "Platform devices" + +config HEARTBEAT + bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40 + default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300 + help + Use the power-on LED on your machine as a load meter. The exact + behavior is platform-dependent, but normally the flash frequency is + a hyperbolic function of the 5-minute load average. + +# We have a dedicated heartbeat LED. :-) +config PROC_HARDWARE + bool "/proc/hardware support" + help + Say Y here to support the /proc/hardware file, which gives you + access to information about the machine you're running on, + including the model, CPU, MMU, clock speed, BogoMIPS rating, + and memory size. + +config NATFEAT + bool "ARAnyM emulator support" + depends on ATARI + help + This option enables support for ARAnyM native features, such as + access to a disk image as /dev/hda. + +config NFBLOCK + tristate "NatFeat block device support" + depends on BLOCK && NATFEAT + help + Say Y to include support for the ARAnyM NatFeat block device + which allows direct access to the hard drives without using + the hardware emulation. + +config NFCON + tristate "NatFeat console driver" + depends on TTY && NATFEAT + help + Say Y to include support for the ARAnyM NatFeat console driver + which allows the console output to be redirected to the stderr + output of ARAnyM. + +config NFETH + tristate "NatFeat Ethernet support" + depends on ETHERNET && NATFEAT + help + Say Y to include support for the ARAnyM NatFeat network device + which will emulate a regular ethernet device while presenting an + ethertap device to the host system. + +config ATARI_ETHERNAT + bool "Atari EtherNAT Ethernet support" + depends on ATARI + ---help--- + Say Y to include support for the EtherNAT network adapter for the + CT/60 extension port. + + To compile the actual ethernet driver, choose Y or M for the SMC91X + option in the network device section; the module will be called smc91x. + +config ATARI_ETHERNEC + bool "Atari EtherNEC Ethernet support" + depends on ATARI_ROM_ISA + ---help--- + Say Y to include support for the EtherNEC network adapter for the + ROM port. The driver works by polling instead of interrupts, so it + is quite slow. + + This driver also supports the ethernet part of the NetUSBee ROM + port combined Ethernet/USB adapter. + + To compile the actual ethernet driver, choose Y or M in for the NE2000 + option in the network device section; the module will be called ne. + +endmenu + +menu "Character devices" + +config ATARI_DSP56K + tristate "Atari DSP56k support" + depends on ATARI + help + If you want to be able to use the DSP56001 in Falcons, say Y. This + driver is still experimental, and if you don't know what it is, or + if you don't have this processor, just say N. + + To compile this driver as a module, choose M here. + +config AMIGA_BUILTIN_SERIAL + tristate "Amiga builtin serial support" + depends on AMIGA && TTY + help + If you want to use your Amiga's built-in serial port in Linux, + answer Y. + + To compile this driver as a module, choose M here. + +config HPDCA + tristate "HP DCA serial support" + depends on DIO && SERIAL_8250 + help + If you want to use the internal "DCA" serial ports on an HP300 + machine, say Y here. + +config HPAPCI + tristate "HP APCI serial support" + depends on HP300 && SERIAL_8250 + help + If you want to use the internal "APCI" serial ports on an HP400 + machine, say Y here. + +config SERIAL_CONSOLE + bool "Support for serial port console" + depends on AMIGA_BUILTIN_SERIAL=y + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). This could be useful if some terminal or printer is connected + to that serial port. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyS1". (Try "man bootparam" or see the documentation of + your boot loader about how to pass options to the kernel at boot + time.) + + If you don't have a graphical console and you say Y here, the + kernel will automatically use the first serial line, /dev/ttyS0, as + system console. + + If unsure, say N. + +endmenu + +endif -- cgit v1.2.3-54-g00ecf