From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- arch/metag/include/asm/metag_regs.h | 1184 +++++++++++++++++++++++++++++++++++ 1 file changed, 1184 insertions(+) create mode 100644 arch/metag/include/asm/metag_regs.h (limited to 'arch/metag/include/asm/metag_regs.h') diff --git a/arch/metag/include/asm/metag_regs.h b/arch/metag/include/asm/metag_regs.h new file mode 100644 index 000000000..acf4b8e6e --- /dev/null +++ b/arch/metag/include/asm/metag_regs.h @@ -0,0 +1,1184 @@ +/* + * asm/metag_regs.h + * + * Copyright (C) 2000-2007, 2012 Imagination Technologies. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + * + * Various defines for Meta core (non memory-mapped) registers. + */ + +#ifndef _ASM_METAG_REGS_H_ +#define _ASM_METAG_REGS_H_ + +/* + * CHIP Unit Identifiers and Valid/Global register number masks + * ------------------------------------------------------------ + */ +#define TXUCT_ID 0x0 /* Control unit regs */ +#ifdef METAC_1_2 +#define TXUCT_MASK 0xFF0FFFFF /* Valid regs 0..31 */ +#else +#define TXUCT_MASK 0xFF1FFFFF /* Valid regs 0..31 */ +#endif +#define TGUCT_MASK 0x00000000 /* No global regs */ +#define TXUD0_ID 0x1 /* Data unit regs */ +#define TXUD1_ID 0x2 +#define TXUDX_MASK 0xFFFFFFFF /* Valid regs 0..31 */ +#define TGUDX_MASK 0xFFFF0000 /* Global regs for base inst */ +#define TXUDXDSP_MASK 0x0F0FFFFF /* Valid DSP regs */ +#define TGUDXDSP_MASK 0x0E0E0000 /* Global DSP ACC regs */ +#define TXUA0_ID 0x3 /* Address unit regs */ +#define TXUA1_ID 0x4 +#define TXUAX_MASK 0x0000FFFF /* Valid regs 0-15 */ +#define TGUAX_MASK 0x0000FF00 /* Global regs 8-15 */ +#define TXUPC_ID 0x5 /* PC registers */ +#define TXUPC_MASK 0x00000003 /* Valid regs 0- 1 */ +#define TGUPC_MASK 0x00000000 /* No global regs */ +#define TXUPORT_ID 0x6 /* Ports are not registers */ +#define TXUTR_ID 0x7 +#define TXUTR_MASK 0x0000005F /* Valid regs 0-3,4,6 */ +#define TGUTR_MASK 0x00000000 /* No global regs */ +#ifdef METAC_2_1 +#define TXUTT_ID 0x8 +#define TXUTT_MASK 0x0000000F /* Valid regs 0-3 */ +#define TGUTT_MASK 0x00000010 /* Global reg 4 */ +#define TXUFP_ID 0x9 /* FPU regs */ +#define TXUFP_MASK 0x0000FFFF /* Valid regs 0-15 */ +#define TGUFP_MASK 0x00000000 /* No global regs */ +#endif /* METAC_2_1 */ + +#ifdef METAC_1_2 +#define TXUXX_MASKS { TXUCT_MASK, TXUDX_MASK, TXUDX_MASK, TXUAX_MASK, \ + TXUAX_MASK, TXUPC_MASK, 0, TXUTR_MASK, \ + 0, 0, 0, 0, 0, 0, 0, 0 } +#define TGUXX_MASKS { TGUCT_MASK, TGUDX_MASK, TGUDX_MASK, TGUAX_MASK, \ + TGUAX_MASK, TGUPC_MASK, 0, TGUTR_MASK, \ + 0, 0, 0, 0, 0, 0, 0, 0 } +#else /* METAC_1_2 */ +#define TXUXX_MASKS { TXUCT_MASK, TXUDX_MASK, TXUDX_MASK, TXUAX_MASK, \ + TXUAX_MASK, TXUPC_MASK, 0, TXUTR_MASK, \ + TXUTT_MASK, TXUFP_MASK, 0, 0, \ + 0, 0, 0, 0 } +#define TGUXX_MASKS { TGUCT_MASK, TGUDX_MASK, TGUDX_MASK, TGUAX_MASK, \ + TGUAX_MASK, TGUPC_MASK, 0, TGUTR_MASK, \ + TGUTT_MASK, TGUFP_MASK, 0, 0, \ + 0, 0, 0, 0 } +#endif /* !METAC_1_2 */ + +#define TXUXXDSP_MASKS { 0, TXUDXDSP_MASK, TXUDXDSP_MASK, 0, 0, 0, 0, 0, \ + 0, 0, 0, 0, 0, 0, 0, 0 } +#define TGUXXDSP_MASKS { 0, TGUDXDSP_MASK, TGUDXDSP_MASK, 0, 0, 0, 0, 0, \ + 0, 0, 0, 0, 0, 0, 0, 0 } + +/* ------------------------------------------------------------------------- +; DATA AND ADDRESS UNIT REGISTERS +; -----------------------------------------------------------------------*/ +/* + Thread local D0 registers + */ +/* D0.0 ; Holds 32-bit result, can be used as scratch */ +#define D0Re0 D0.0 +/* D0.1 ; Used to pass Arg6_32 */ +#define D0Ar6 D0.1 +/* D0.2 ; Used to pass Arg4_32 */ +#define D0Ar4 D0.2 +/* D0.3 ; Used to pass Arg2_32 to a called routine (see D1.3 below) */ +#define D0Ar2 D0.3 +/* D0.4 ; Can be used as scratch; used to save A0FrP in entry sequences */ +#define D0FrT D0.4 +/* D0.5 ; C compiler assumes preservation, save with D1.5 if used */ +/* D0.6 ; C compiler assumes preservation, save with D1.6 if used */ +/* D0.7 ; C compiler assumes preservation, save with D1.7 if used */ +/* D0.8 ; Use of D0.8 and above is not encouraged */ +/* D0.9 */ +/* D0.10 */ +/* D0.11 */ +/* D0.12 */ +/* D0.13 */ +/* D0.14 */ +/* D0.15 */ +/* + Thread local D1 registers + */ +/* D1.0 ; Holds top 32-bits of 64-bit result, can be used as scratch */ +#define D1Re0 D1.0 +/* D1.1 ; Used to pass Arg5_32 */ +#define D1Ar5 D1.1 +/* D1.2 ; Used to pass Arg3_32 */ +#define D1Ar3 D1.2 +/* D1.3 ; Used to pass Arg1_32 (first 32-bit argument) to a called routine */ +#define D1Ar1 D1.3 +/* D1.4 ; Used for Return Pointer, save during entry with A0FrP (via D0.4) */ +#define D1RtP D1.4 +/* D1.5 ; C compiler assumes preservation, save if used */ +/* D1.6 ; C compiler assumes preservation, save if used */ +/* D1.7 ; C compiler assumes preservation, save if used */ +/* D1.8 ; Use of D1.8 and above is not encouraged */ +/* D1.9 */ +/* D1.10 */ +/* D1.11 */ +/* D1.12 */ +/* D1.13 */ +/* D1.14 */ +/* D1.15 */ +/* + Thread local A0 registers + */ +/* A0.0 ; Primary stack pointer */ +#define A0StP A0.0 +/* A0.1 ; Used as local frame pointer in C, save if used (via D0.4) */ +#define A0FrP A0.1 +/* A0.2 */ +/* A0.3 */ +/* A0.4 ; Use of A0.4 and above is not encouraged */ +/* A0.5 */ +/* A0.6 */ +/* A0.7 */ +/* + Thread local A1 registers + */ +/* A1.0 ; Global static chain pointer - do not modify */ +#define A1GbP A1.0 +/* A1.1 ; Local static chain pointer in C, can be used as scratch */ +#define A1LbP A1.1 +/* A1.2 */ +/* A1.3 */ +/* A1.4 ; Use of A1.4 and above is not encouraged */ +/* A1.5 */ +/* A1.6 */ +/* A1.7 */ +#ifdef METAC_2_1 +/* Renameable registers for use with Fast Interrupts */ +/* The interrupt stack pointer (usually a global register) */ +#define A0IStP A0IReg +/* The interrupt global pointer (usually a global register) */ +#define A1IGbP A1IReg +#endif +/* + Further registers may be globally allocated via linkage/loading tools, + normally they are not used. + */ +/*------------------------------------------------------------------------- +; STACK STRUCTURE and CALLING CONVENTION +; -----------------------------------------------------------------------*/ +/* +; Calling convention indicates that the following is the state of the +; stack frame at the start of a routine- +; +; Arg9_32 [A0StP+#-12] +; Arg8_32 [A0StP+#- 8] +; Arg7_32 [A0StP+#- 4] +; A0StP-> +; +; Registers D1.3, D0.3, ..., to D0.1 are used to pass Arg1_32 to Arg6_32 +; respectively. If a routine needs to store them on the stack in order +; to make sub-calls or because of the general complexity of the routine it +; is best to dump these registers immediately at the start of a routine +; using a MSETL or SETL instruction- +; +; MSETL [A0StP],D0Ar6,D0Ar4,D0Ar2; Only dump argments expected +;or SETL [A0StP+#8++],D0Ar2 ; Up to two 32-bit args expected +; +; For non-leaf routines it is always necessary to save and restore at least +; the return address value D1RtP on the stack. Also by convention if the +; frame is saved then a new A0FrP value must be set-up. So for non-leaf +; routines at this point both these registers must be saved onto the stack +; using a SETL instruction and the new A0FrP value is then set-up- +; +; MOV D0FrT,A0FrP +; ADD A0FrP,A0StP,#0 +; SETL [A0StP+#8++],D0FrT,D1RtP +; +; Registers D0.5, D1.5, to D1.7 are assumed to be preserved across calls so +; a SETL or MSETL instruction can be used to save the current state +; of these registers if they are modified by the current routine- +; +; MSETL [A0StP],D0.5,D0.6,D0.7 ; Only save registers modified +;or SETL [A0StP+#8++],D0.5 ; Only D0.5 and/or D1.5 modified +; +; All of the above sequences can be combined into one maximal case- +; +; MOV D0FrT,A0FrP ; Save and calculate new frame pointer +; ADD A0FrP,A0StP,#(ARS) +; MSETL [A0StP],D0Ar6,D0Ar4,D0Ar2,D0FrT,D0.5,D0.6,D0.7 +; +; Having completed the above sequence the only remaining task on routine +; entry is to reserve any local and outgoing argment storage space on the +; stack. This instruction may be omitted if the size of this region is zero- +; +; ADD A0StP,A0StP,#(LCS) +; +; LCS is the first example use of one of a number of standard local defined +; values that can be created to make assembler code more readable and +; potentially more robust- +; +; #define ARS 0x18 ; Register arg bytes saved on stack +; #define FRS 0x20 ; Frame save area size in bytes +; #define LCS 0x00 ; Locals and Outgoing arg size +; #define ARO (LCS+FRS) ; Stack offset to access args +; +; All of the above defines should be undefined (#undef) at the end of each +; routine to avoid accidental use in the next routine. +; +; Given all of the above the following stack structure is expected during +; the body of a routine if all args passed in registers are saved during +; entry- +; +; ; 'Incoming args area' +; Arg10_32 [A0StP+#-((10*4)+ARO)] Arg9_32 [A0StP+#-(( 9*4)+ARO)] +; Arg8_32 [A0StP+#-(( 8*4)+ARO)] Arg7_32 [A0StP+#-(( 7*4)+ARO)] +;--- Call point +; D0Ar6= Arg6_32 [A0StP+#-(( 6*4)+ARO)] D1Ar5=Arg5_32 [A0StP+#-(( 5*4)+ARO)] +; D0Ar4= Arg4_32 [A0StP+#-(( 4*4)+ARO)] D1Ar3=Arg3_32 [A0StP+#-(( 3*4)+ARO)] +; D0Ar2= Arg2_32 [A0StP+#-(( 2*4)+ARO)] D1Ar2=Arg1_32 [A0StP+#-(( 1*4)+ARO)] +; ; 'Frame area' +; A0FrP-> D0FrT, D1RtP, +; D0.5, D1.5, +; D0.6, D1.6, +; D0.7, D1.7, +; ; 'Locals area' +; Loc0_32 [A0StP+# (( 0*4)-LCS)], Loc1_32 [A0StP+# (( 1*4)-LCS)] +; .... other locals +; Locn_32 [A0StP+# (( n*4)-LCS)] +; ; 'Outgoing args area' +; Outm_32 [A0StP+#- ( m*4)] .... other outgoing args +; Out8_32 [A0StP+#- ( 1*4)] Out7_32 [A0StP+#- ( 1*4)] +; A0StP-> (Out1_32-Out6_32 in regs D1Ar1-D0Ar6) +; +; The exit sequence for a non-leaf routine can use the frame pointer created +; in the entry sequence to optimise the recovery of the full state- +; +; MGETL D0FrT,D0.5,D0.6,D0.7,[A0FrP] +; SUB A0StP,A0FrP,#(ARS+FRS) +; MOV A0FrP,D0FrT +; MOV PC,D1RtP +; +; Having described the most complex non-leaf case above, it is worth noting +; that if a routine is a leaf and does not use any of the caller-preserved +; state. The routine can be implemented as- +; +; ADD A0StP,A0StP,#LCS +; .... body of routine +; SUB A0StP,A0StP,#LCS +; MOV PC,D1RtP +; +; The stack adjustments can also be omitted if no local storage is required. +; +; Another exit sequence structure is more applicable if for a leaf routine +; with no local frame pointer saved/generated in which the call saved +; registers need to be saved and restored- +; +; MSETL [A0StP],D0.5,D0.6,D0.7 ; Hence FRS is 0x18, ARS is 0x00 +; ADD A0StP,A0StP,#LCS +; .... body of routine +; GETL D0.5,D1.5,[A0StP+#((0*8)-(FRS+LCS))] +; GETL D0.6,D1.6,[A0StP+#((1*8)-(FRS+LCS))] +; GETL D0.7,D1.7,[A0StP+#((2*8)-(FRS+LCS))] +; SUB A0StP,A0StP,#(ARS+FRS+LCS) +; MOV PC,D1RtP +; +; Lastly, to support profiling assembler code should use a fixed entry/exit +; sequence if the trigger define _GMON_ASM is defined- +; +; #ifndef _GMON_ASM +; ... optimised entry code +; #else +; ; Profiling entry case +; MOV D0FrT,A0FrP ; Save and calculate new frame pointer +; ADD A0FrP,A0StP,#(ARS) +; MSETL [A0StP],...,D0FrT,... or SETL [A0FrP],D0FrT,D1RtP +; CALLR D0FrT,_mcount_wrapper +; #endif +; ... body of routine +; #ifndef _GMON_ASM +; ... optimised exit code +; #else +; ; Profiling exit case +; MGETL D0FrT,...,[A0FrP] or GETL D0FrT,D1RtP,[A0FrP++] +; SUB A0StP,A0FrP,#(ARS+FRS) +; MOV A0FrP,D0FrT +; MOV PC,D1RtP +; #endif + + +; ------------------------------------------------------------------------- +; CONTROL UNIT REGISTERS +; ------------------------------------------------------------------------- +; +; See the assembler guide, hardware documentation, or the field values +; defined below for some details of the use of these registers. +*/ +#define TXENABLE CT.0 /* Need to define bit-field values in these */ +#define TXMODE CT.1 +#define TXSTATUS CT.2 /* DEFAULT 0x00020000 */ +#define TXRPT CT.3 +#define TXTIMER CT.4 +#define TXL1START CT.5 +#define TXL1END CT.6 +#define TXL1COUNT CT.7 +#define TXL2START CT.8 +#define TXL2END CT.9 +#define TXL2COUNT CT.10 +#define TXBPOBITS CT.11 +#define TXMRSIZE CT.12 +#define TXTIMERI CT.13 +#define TXDRCTRL CT.14 /* DEFAULT 0x0XXXF0F0 */ +#define TXDRSIZE CT.15 +#define TXCATCH0 CT.16 +#define TXCATCH1 CT.17 +#define TXCATCH2 CT.18 +#define TXCATCH3 CT.19 + +#ifdef METAC_2_1 +#define TXDEFR CT.20 +#define TXCPRS CT.21 +#endif + +#define TXINTERN0 CT.23 +#define TXAMAREG0 CT.24 +#define TXAMAREG1 CT.25 +#define TXAMAREG2 CT.26 +#define TXAMAREG3 CT.27 +#define TXDIVTIME CT.28 /* DEFAULT 0x00000001 */ +#define TXPRIVEXT CT.29 /* DEFAULT 0x003B0000 */ +#define TXTACTCYC CT.30 +#define TXIDLECYC CT.31 + +/***************************************************************************** + * CONTROL UNIT REGISTER BITS + ****************************************************************************/ +/* + * The following registers and where appropriate the sub-fields of those + * registers are defined for pervasive use in controlling program flow. + */ + +/* + * TXENABLE register fields - only the thread id is routinely useful + */ +#define TXENABLE_REGNUM 0 +#define TXENABLE_THREAD_BITS 0x00000700 +#define TXENABLE_THREAD_S 8 +#define TXENABLE_REV_STEP_BITS 0x000000F0 +#define TXENABLE_REV_STEP_S 4 + +/* + * TXMODE register - controls extensions of the instruction set + */ +#define TXMODE_REGNUM 1 +#define TXMODE_DEFAULT 0 /* All fields default to zero */ + +/* + * TXSTATUS register - contains a couple of stable bits that can be used + * to determine the privilege processing level and interrupt + * processing level of the current thread. + */ +#define TXSTATUS_REGNUM 2 +#define TXSTATUS_PSTAT_BIT 0x00020000 /* -> Privilege active */ +#define TXSTATUS_PSTAT_S 17 +#define TXSTATUS_ISTAT_BIT 0x00010000 /* -> In interrupt state */ +#define TXSTATUS_ISTAT_S 16 + +/* + * These are all relatively boring registers, mostly full 32-bit + */ +#define TXRPT_REGNUM 3 /* Repeat counter for XFR... instructions */ +#define TXTIMER_REGNUM 4 /* Timer-- causes timer trigger on overflow */ +#define TXL1START_REGNUM 5 /* Hardware Loop 1 Start-PC/End-PC/Count */ +#define TXL1END_REGNUM 6 +#define TXL1COUNT_REGNUM 7 +#define TXL2START_REGNUM 8 /* Hardware Loop 2 Start-PC/End-PC/Count */ +#define TXL2END_REGNUM 9 +#define TXL2COUNT_REGNUM 10 +#define TXBPOBITS_REGNUM 11 /* Branch predict override bits - tune perf */ +#define TXTIMERI_REGNUM 13 /* Timer-- time based interrupt trigger */ + +/* + * TXDIVTIME register is routinely read to calculate the time-base for + * the TXTIMER register. + */ +#define TXDIVTIME_REGNUM 28 +#define TXDIVTIME_DIV_BITS 0x000000FF +#define TXDIVTIME_DIV_S 0 +#define TXDIVTIME_DIV_MIN 0x00000001 /* Maximum resolution */ +#define TXDIVTIME_DIV_MAX 0x00000100 /* 1/1 -> 1/256 resolution */ +#define TXDIVTIME_BASE_HZ 1000000 /* Timers run at 1Mhz @1/1 */ + +/* + * TXPRIVEXT register can be consulted to decide if write access to a + * part of the threads register set is not permitted when in + * unprivileged mode (PSTAT == 0). + */ +#define TXPRIVEXT_REGNUM 29 +#define TXPRIVEXT_COPRO_BITS 0xFF000000 /* Co-processor 0-7 */ +#define TXPRIVEXT_COPRO_S 24 +#ifndef METAC_1_2 +#define TXPRIVEXT_TXTIMER_BIT 0x00080000 /* TXTIMER priv */ +#define TXPRIVEXT_TRACE_BIT 0x00040000 /* TTEXEC|TTCTRL|GTEXEC */ +#endif +#define TXPRIVEXT_TXTRIGGER_BIT 0x00020000 /* TXSTAT|TXMASK|TXPOLL */ +#define TXPRIVEXT_TXGBLCREG_BIT 0x00010000 /* Global common regs */ +#define TXPRIVEXT_CBPRIV_BIT 0x00008000 /* Mem i/f dump priv */ +#define TXPRIVEXT_ILOCK_BIT 0x00004000 /* LOCK inst priv */ +#define TXPRIVEXT_TXITACCYC_BIT 0x00002000 /* TXIDLECYC|TXTACTCYC */ +#define TXPRIVEXT_TXDIVTIME_BIT 0x00001000 /* TXDIVTIME priv */ +#define TXPRIVEXT_TXAMAREGX_BIT 0x00000800 /* TXAMAREGX priv */ +#define TXPRIVEXT_TXTIMERI_BIT 0x00000400 /* TXTIMERI priv */ +#define TXPRIVEXT_TXSTATUS_BIT 0x00000200 /* TXSTATUS priv */ +#define TXPRIVEXT_TXDISABLE_BIT 0x00000100 /* TXENABLE priv */ +#ifndef METAC_1_2 +#define TXPRIVEXT_MINIMON_BIT 0x00000080 /* Enable Minim features */ +#define TXPRIVEXT_OLDBCCON_BIT 0x00000020 /* Restore Static predictions */ +#define TXPRIVEXT_ALIGNREW_BIT 0x00000010 /* Align & precise checks */ +#endif +#define TXPRIVEXT_KEEPPRI_BIT 0x00000008 /* Use AMA_Priority if ISTAT=1*/ +#define TXPRIVEXT_TXTOGGLEI_BIT 0x00000001 /* TX.....I priv */ + +/* + * TXTACTCYC register - counts instructions issued for this thread + */ +#define TXTACTCYC_REGNUM 30 +#define TXTACTCYC_COUNT_MASK 0x00FFFFFF + +/* + * TXIDLECYC register - counts idle cycles + */ +#define TXIDLECYC_REGNUM 31 +#define TXIDLECYC_COUNT_MASK 0x00FFFFFF + +/***************************************************************************** + * DSP EXTENSIONS + ****************************************************************************/ +/* + * The following values relate to fields and controls that only a program + * using the DSP extensions of the META instruction set need to know. + */ + + +#ifndef METAC_1_2 +/* + * Allow co-processor hardware to replace the read pipeline data source in + * appropriate cases. + */ +#define TXMODE_RDCPEN_BIT 0x00800000 +#endif + +/* + * Address unit addressing modes + */ +#define TXMODE_A1ADDR_BITS 0x00007000 +#define TXMODE_A1ADDR_S 12 +#define TXMODE_A0ADDR_BITS 0x00000700 +#define TXMODE_A0ADDR_S 8 +#define TXMODE_AXADDR_MODULO 3 +#define TXMODE_AXADDR_REVB 4 +#define TXMODE_AXADDR_REVW 5 +#define TXMODE_AXADDR_REVD 6 +#define TXMODE_AXADDR_REVL 7 + +/* + * Data unit OverScale select (default 0 -> normal, 1 -> top 16 bits) + */ +#define TXMODE_DXOVERSCALE_BIT 0x00000080 + +/* + * Data unit MX mode select (default 0 -> MX16, 1 -> MX8) + */ +#define TXMODE_M8_BIT 0x00000040 + +/* + * Data unit accumulator saturation point (default -> 40 bit accumulator) + */ +#define TXMODE_DXACCSAT_BIT 0x00000020 /* Set for 32-bit accumulator */ + +/* + * Data unit accumulator saturation enable (default 0 -> no saturation) + */ +#define TXMODE_DXSAT_BIT 0x00000010 + +/* + * Data unit master rounding control (default 0 -> normal, 1 -> convergent) + */ +#define TXMODE_DXROUNDING_BIT 0x00000008 + +/* + * Data unit product shift for fractional arithmetic (default off) + */ +#define TXMODE_DXPRODSHIFT_BIT 0x00000004 + +/* + * Select the arithmetic mode (multiply mostly) for both data units + */ +#define TXMODE_DXARITH_BITS 0x00000003 +#define TXMODE_DXARITH_32 3 +#define TXMODE_DXARITH_32H 2 +#define TXMODE_DXARITH_S16 1 +#define TXMODE_DXARITH_16 0 + +/* + * TXMRSIZE register value only relevant when DSP modulo addressing active + */ +#define TXMRSIZE_REGNUM 12 +#define TXMRSIZE_MIN 0x0002 /* 0, 1 -> normal addressing logic */ +#define TXMRSIZE_MAX 0xFFFF + +/* + * TXDRCTRL register can be used to detect the actaul size of the DSP RAM + * partitions allocated to this thread. + */ +#define TXDRCTRL_REGNUM 14 +#define TXDRCTRL_SINESIZE_BITS 0x0F000000 +#define TXDRCTRL_SINESIZE_S 24 +#define TXDRCTRL_RAMSZPOW_BITS 0x001F0000 /* Limit = (1< DSP Thread */ +#define TXENABLE_CLASS_LDSP 0x8 /* -> DSP LITE Thread */ +#define TXENABLE_CLASS_GP 0xC /* -> General Purpose Thread */ +#define TXENABLE_CLASSALT_LFPU 0x2 /* Set to indicate LITE FPU */ +#define TXENABLE_CLASSALT_FPUR8 0x1 /* Set to indicate 8xFPU regs */ +#define TXENABLE_MTXARCH_BIT 0x00000800 +#define TXENABLE_STEP_REV_BITS 0x000000F0 +#define TXENABLE_STEP_REV_S 4 +#define TXENABLE_STOPPED_BIT 0x00000004 /* TXOFF due to ENABLE->0 */ +#define TXENABLE_OFF_BIT 0x00000002 /* Thread is in off state */ +#define TXENABLE_ENABLE_BIT 0x00000001 /* Set if running */ + +/* + * TXSTATUS register - used by external/internal interrupt/error handler + */ +#define TXSTATUS_CB1MARKER_BIT 0x00800000 /* -> int level mem state */ +#define TXSTATUS_CBMARKER_BIT 0x00400000 /* -> mem i/f state dumped */ +#define TXSTATUS_MEM_FAULT_BITS 0x00300000 +#define TXSTATUS_MEM_FAULT_S 20 +#define TXSTATUS_MEMFAULT_NONE 0x0 /* -> No memory fault */ +#define TXSTATUS_MEMFAULT_GEN 0x1 /* -> General fault */ +#define TXSTATUS_MEMFAULT_PF 0x2 /* -> Page fault */ +#define TXSTATUS_MEMFAULT_RO 0x3 /* -> Read only fault */ +#define TXSTATUS_MAJOR_HALT_BITS 0x000C0000 +#define TXSTATUS_MAJOR_HALT_S 18 +#define TXSTATUS_MAJHALT_TRAP 0x0 /* -> SWITCH inst used */ +#define TXSTATUS_MAJHALT_INST 0x1 /* -> Unknown inst or fetch */ +#define TXSTATUS_MAJHALT_PRIV 0x2 /* -> Internal privilege */ +#define TXSTATUS_MAJHALT_MEM 0x3 /* -> Memory i/f fault */ +#define TXSTATUS_L_STEP_BITS 0x00000800 /* -> Progress of L oper */ +#define TXSTATUS_LSM_STEP_BITS 0x00000700 /* -> Progress of L/S mult */ +#define TXSTATUS_LSM_STEP_S 8 +#define TXSTATUS_FLAG_BITS 0x0000001F /* -> All the flags */ +#define TXSTATUS_SCC_BIT 0x00000010 /* -> Split-16 flags ... */ +#define TXSTATUS_SCF_LZ_BIT 0x00000008 /* -> Split-16 Low Z flag */ +#define TXSTATUS_SCF_HZ_BIT 0x00000004 /* -> Split-16 High Z flag */ +#define TXSTATUS_SCF_HC_BIT 0x00000002 /* -> Split-16 High C flag */ +#define TXSTATUS_SCF_LC_BIT 0x00000001 /* -> Split-16 Low C flag */ +#define TXSTATUS_CF_Z_BIT 0x00000008 /* -> Condition Z flag */ +#define TXSTATUS_CF_N_BIT 0x00000004 /* -> Condition N flag */ +#define TXSTATUS_CF_O_BIT 0x00000002 /* -> Condition O flag */ +#define TXSTATUS_CF_C_BIT 0x00000001 /* -> Condition C flag */ + +/* + * TXCATCH0-3 register contents may store information on a memory operation + * that has failed if the bit TXSTATUS_CBMARKER_BIT is set. + */ +#define TXCATCH0_REGNUM 16 +#define TXCATCH1_REGNUM 17 +#define TXCATCH1_ADDR_BITS 0xFFFFFFFF /* TXCATCH1 is Addr 0-31 */ +#define TXCATCH1_ADDR_S 0 +#define TXCATCH2_REGNUM 18 +#define TXCATCH2_DATA0_BITS 0xFFFFFFFF /* TXCATCH2 is Data 0-31 */ +#define TXCATCH2_DATA0_S 0 +#define TXCATCH3_REGNUM 19 +#define TXCATCH3_DATA1_BITS 0xFFFFFFFF /* TXCATCH3 is Data 32-63 */ +#define TXCATCH3_DATA1_S 0 + +/* + * Detailed catch state information + * -------------------------------- + */ + +/* Contents of TXCATCH0 register */ +#define TXCATCH0_LDRXX_BITS 0xF8000000 /* Load destination reg 0-31 */ +#define TXCATCH0_LDRXX_S 27 +#define TXCATCH0_LDDST_BITS 0x07FF0000 /* Load destination bits */ +#define TXCATCH0_LDDST_S 16 +#define TXCATCH0_LDDST_D1DSP 0x400 /* One bit set if it's a LOAD */ +#define TXCATCH0_LDDST_D0DSP 0x200 +#define TXCATCH0_LDDST_TMPLT 0x100 +#define TXCATCH0_LDDST_TR 0x080 +#ifdef METAC_2_1 +#define TXCATCH0_LDDST_FPU 0x040 +#endif +#define TXCATCH0_LDDST_PC 0x020 +#define TXCATCH0_LDDST_A1 0x010 +#define TXCATCH0_LDDST_A0 0x008 +#define TXCATCH0_LDDST_D1 0x004 +#define TXCATCH0_LDDST_D0 0x002 +#define TXCATCH0_LDDST_CT 0x001 +#ifdef METAC_2_1 +#define TXCATCH0_WATCHSTOP_BIT 0x00004000 /* Set if Data Watch set fault */ +#endif +#define TXCATCH0_WATCHS_BIT 0x00004000 /* Set if Data Watch set fault */ +#define TXCATCH0_WATCH1_BIT 0x00002000 /* Set if Data Watch 1 matches */ +#define TXCATCH0_WATCH0_BIT 0x00001000 /* Set if Data Watch 0 matches */ +#define TXCATCH0_FAULT_BITS 0x00000C00 /* See TXSTATUS_MEMFAULT_* */ +#define TXCATCH0_FAULT_S 10 +#define TXCATCH0_PRIV_BIT 0x00000200 /* Privilege of transaction */ +#define TXCATCH0_READ_BIT 0x00000100 /* Set for Read or Load cases */ + +#ifdef METAC_2_1 +/* LNKGET Marker bit in TXCATCH0 */ +#define TXCATCH0_LNKGET_MARKER_BIT 0x00000008 +#define TXCATCH0_PREPROC_BIT 0x00000004 +#endif + +/* Loads are indicated by one of the LDDST bits being set */ +#define TXCATCH0_LDM16_BIT 0x00000004 /* Load M16 flag */ +#define TXCATCH0_LDL2L1_BITS 0x00000003 /* Load data size L2,L1 */ +#define TXCATCH0_LDL2L1_S 0 + +/* Reads are indicated by the READ bit being set without LDDST bits */ +#define TXCATCH0_RAXX_BITS 0x0000001F /* RAXX issue port for read */ +#define TXCATCH0_RAXX_S 0 + +/* Write operations are all that remain if READ bit is not set */ +#define TXCATCH0_WMASK_BITS 0x000000FF /* Write byte lane mask */ +#define TXCATCH0_WMASK_S 0 + +#ifdef METAC_2_1 + +/* When a FPU exception is signalled then FPUSPEC == FPUSPEC_TAG */ +#define TXCATCH0_FPURDREG_BITS 0xF8000000 +#define TXCATCH0_FPURDREG_S 27 +#define TXCATCH0_FPUR1REG_BITS 0x07C00000 +#define TXCATCH0_FPUR1REG_S 22 +#define TXCATCH0_FPUSPEC_BITS 0x000F0000 +#define TXCATCH0_FPUSPEC_S 16 +#define TXCATCH0_FPUSPEC_TAG 0xF +#define TXCATCH0_FPUINSTA_BIT 0x00001000 +#define TXCATCH0_FPUINSTQ_BIT 0x00000800 +#define TXCATCH0_FPUINSTZ_BIT 0x00000400 +#define TXCATCH0_FPUINSTN_BIT 0x00000200 +#define TXCATCH0_FPUINSTO3O_BIT 0x00000100 +#define TXCATCH0_FPUWIDTH_BITS 0x000000C0 +#define TXCATCH0_FPUWIDTH_S 6 +#define TXCATCH0_FPUWIDTH_FLOAT 0 +#define TXCATCH0_FPUWIDTH_DOUBLE 1 +#define TXCATCH0_FPUWIDTH_PAIRED 2 +#define TXCATCH0_FPUOPENC_BITS 0x0000003F +#define TXCATCH0_FPUOPENC_S 0 +#define TXCATCH0_FPUOPENC_ADD 0 /* rop1=Rs1, rop3=Rs2 */ +#define TXCATCH0_FPUOPENC_SUB 1 /* rop1=Rs1, rop3=Rs2 */ +#define TXCATCH0_FPUOPENC_MUL 2 /* rop1=Rs1, rop2=Rs2 */ +#define TXCATCH0_FPUOPENC_ATOI 3 /* rop3=Rs */ +#define TXCATCH0_FPUOPENC_ATOX 4 /* rop3=Rs, uses #Imm */ +#define TXCATCH0_FPUOPENC_ITOA 5 /* rop3=Rs */ +#define TXCATCH0_FPUOPENC_XTOA 6 /* rop3=Rs, uses #Imm */ +#define TXCATCH0_FPUOPENC_ATOH 7 /* rop2=Rs */ +#define TXCATCH0_FPUOPENC_HTOA 8 /* rop2=Rs */ +#define TXCATCH0_FPUOPENC_DTOF 9 /* rop3=Rs */ +#define TXCATCH0_FPUOPENC_FTOD 10 /* rop3=Rs */ +#define TXCATCH0_FPUOPENC_DTOL 11 /* rop3=Rs */ +#define TXCATCH0_FPUOPENC_LTOD 12 /* rop3=Rs */ +#define TXCATCH0_FPUOPENC_DTOXL 13 /* rop3=Rs, uses #imm */ +#define TXCATCH0_FPUOPENC_XLTOD 14 /* rop3=Rs, uses #imm */ +#define TXCATCH0_FPUOPENC_CMP 15 /* rop1=Rs1, rop2=Rs2 */ +#define TXCATCH0_FPUOPENC_MIN 16 /* rop1=Rs1, rop2=Rs2 */ +#define TXCATCH0_FPUOPENC_MAX 17 /* rop1=Rs1, rop2=Rs2 */ +#define TXCATCH0_FPUOPENC_ADDRE 18 /* rop1=Rs1, rop3=Rs2 */ +#define TXCATCH0_FPUOPENC_SUBRE 19 /* rop1=Rs1, rop3=Rs2 */ +#define TXCATCH0_FPUOPENC_MULRE 20 /* rop1=Rs1, rop2=Rs2 */ +#define TXCATCH0_FPUOPENC_MXA 21 /* rop1=Rs1, rop2=Rs2, rop3=Rs3*/ +#define TXCATCH0_FPUOPENC_MXAS 22 /* rop1=Rs1, rop2=Rs2, rop3=Rs3*/ +#define TXCATCH0_FPUOPENC_MAR 23 /* rop1=Rs1, rop2=Rs2 */ +#define TXCATCH0_FPUOPENC_MARS 24 /* rop1=Rs1, rop2=Rs2 */ +#define TXCATCH0_FPUOPENC_MUZ 25 /* rop1=Rs1, rop2=Rs2, rop3=Rs3*/ +#define TXCATCH0_FPUOPENC_MUZS 26 /* rop1=Rs1, rop2=Rs2, rop3=Rs3*/ +#define TXCATCH0_FPUOPENC_RCP 27 /* rop2=Rs */ +#define TXCATCH0_FPUOPENC_RSQ 28 /* rop2=Rs */ + +/* For floating point exceptions TXCATCH1 is used to carry extra data */ +#define TXCATCH1_FPUR2REG_BITS 0xF8000000 +#define TXCATCH1_FPUR2REG_S 27 +#define TXCATCH1_FPUR3REG_BITS 0x07C00000 /* Undefined if O3O set */ +#define TXCATCH1_FPUR3REG_S 22 +#define TXCATCH1_FPUIMM16_BITS 0x0000FFFF +#define TXCATCH1_FPUIMM16_S 0 + +#endif /* METAC_2_1 */ + +/* + * TXDIVTIME register used to hold the partial base address of memory i/f + * state dump area. Now deprecated. + */ +#define TXDIVTIME_CBBASE_MASK 0x03FFFE00 +#define TXDIVTIME_CBBASE_LINBASE 0x80000000 +#define TXDIVTIME_CBBASE_LINBOFF 0x00000000 /* BGnd state */ +#define TXDIVTIME_CBBASE_LINIOFF 0x00000100 /* Int state */ + +/* + * TXDIVTIME register used to indicate if the read pipeline was dirty when a + * thread was interrupted, halted, or generated an exception. It is invalid + * to attempt to issue a further pipeline read address while the read + * pipeline is in the dirty state. + */ +#define TXDIVTIME_RPDIRTY_BIT 0x80000000 + +/* + * Further bits in the TXDIVTIME register allow interrupt handling code to + * short-cut the discovery the most significant bit last read from TXSTATI. + * + * This is the bit number of the trigger line that a low level interrupt + * handler should acknowledge and then perhaps the index of a corresponding + * handler function. + */ +#define TXDIVTIME_IRQENC_BITS 0x0F000000 +#define TXDIVTIME_IRQENC_S 24 + +/* + * If TXDIVTIME_RPVALID_BIT is set the read pipeline contained significant + * information when the thread was interrupted|halted|exceptioned. Each slot + * containing data is indicated by a one bit in the corresponding + * TXDIVTIME_RPMASK_BITS bit (least significance bit relates to first + * location in read pipeline - most likely to have the 1 state). Empty slots + * contain zeroes with no interlock applied on reads if RPDIRTY is currently + * set with RPMASK itself being read-only state. + */ +#define TXDIVTIME_RPMASK_BITS 0x003F0000 /* -> Full (1) Empty (0) */ +#define TXDIVTIME_RPMASK_S 16 + +/* + * TXPRIVEXT register can be used to single step thread execution and + * enforce synchronous memory i/f address checking for debugging purposes. + */ +#define TXPRIVEXT_TXSTEP_BIT 0x00000004 +#define TXPRIVEXT_MEMCHECK_BIT 0x00000002 + +/* + * TXINTERNx registers holds internal state information for H/W debugging only + */ +#define TXINTERN0_REGNUM 23 +#define TXINTERN0_LOCK2_BITS 0xF0000000 +#define TXINTERN0_LOCK2_S 28 +#define TXINTERN0_LOCK1_BITS 0x0F000000 +#define TXINTERN0_LOCK1_S 24 +#define TXINTERN0_TIFDF_BITS 0x0000F000 +#define TXINTERN0_TIFDF_S 12 +#define TXINTERN0_TIFIB_BITS 0x00000F00 +#define TXINTERN0_TIFIB_S 8 +#define TXINTERN0_TIFAF_BITS 0x000000F0 +#define TXINTERN0_TIFAF_S 4 +#define TXINTERN0_MSTATE_BITS 0x0000000F +#define TXINTERN0_MSTATE_S 0 + +/* + * TXSTAT, TXMASK, TXPOLL, TXSTATI, TXMASKI, TXPOLLI registers from trigger + * bank all have similar contents (upper kick count bits not in MASK regs) + */ +#define TXSTAT_REGNUM 0 +#define TXSTAT_TIMER_BIT 0x00000001 +#define TXSTAT_TIMER_S 0 +#define TXSTAT_KICK_BIT 0x00000002 +#define TXSTAT_KICK_S 1 +#define TXSTAT_DEFER_BIT 0x00000008 +#define TXSTAT_DEFER_S 3 +#define TXSTAT_EXTTRIG_BITS 0x0000FFF0 +#define TXSTAT_EXTTRIG_S 4 +#define TXSTAT_FPE_BITS 0x003F0000 +#define TXSTAT_FPE_S 16 +#define TXSTAT_FPE_DENORMAL_BIT 0x00200000 +#define TXSTAT_FPE_DENORMAL_S 21 +#define TXSTAT_FPE_INVALID_BIT 0x00100000 +#define TXSTAT_FPE_INVALID_S 20 +#define TXSTAT_FPE_DIVBYZERO_BIT 0x00080000 +#define TXSTAT_FPE_DIVBYZERO_S 19 +#define TXSTAT_FPE_OVERFLOW_BIT 0x00040000 +#define TXSTAT_FPE_OVERFLOW_S 18 +#define TXSTAT_FPE_UNDERFLOW_BIT 0x00020000 +#define TXSTAT_FPE_UNDERFLOW_S 17 +#define TXSTAT_FPE_INEXACT_BIT 0x00010000 +#define TXSTAT_FPE_INEXACT_S 16 +#define TXSTAT_BUSERR_BIT 0x00800000 /* Set if bus error/ack state */ +#define TXSTAT_BUSERR_S 23 +#define TXSTAT_BUSSTATE_BITS 0xFF000000 /* Read only */ +#define TXSTAT_BUSSTATE_S 24 +#define TXSTAT_KICKCNT_BITS 0xFFFF0000 +#define TXSTAT_KICKCNT_S 16 +#define TXMASK_REGNUM 1 +#define TXSTATI_REGNUM 2 +#define TXSTATI_BGNDHALT_BIT 0x00000004 +#define TXMASKI_REGNUM 3 +#define TXPOLL_REGNUM 4 +#define TXPOLLI_REGNUM 6 + +/* + * TXDRCTRL register can be used to partition the DSP RAM space available to + * this thread at startup. This is achieved by offsetting the region allocated + * to each thread. + */ +#define TXDRCTRL_D1PARTOR_BITS 0x00000F00 /* OR's into top 4 bits */ +#define TXDRCTRL_D1PARTOR_S 8 +#define TXDRCTRL_D0PARTOR_BITS 0x0000000F /* OR's into top 4 bits */ +#define TXDRCTRL_D0PARTOR_S 0 +/* Given extracted Pow and Or fields this is threads base within DSP RAM */ +#define TXDRCTRL_DXBASE(Pow, Or) ((Or)<<((Pow)-4)) + +/***************************************************************************** + * RUN TIME TRACE CONTROL REGISTERS + ****************************************************************************/ +/* + * The following values are only relevant to code that implements run-time + * trace features within the META Core + */ +#define TTEXEC TT.0 +#define TTCTRL TT.1 +#define TTMARK TT.2 +#define TTREC TT.3 +#define GTEXEC TT.4 + +#define TTEXEC_REGNUM 0 +#define TTEXEC_EXTTRIGAND_BITS 0x7F000000 +#define TTEXEC_EXTTRIGAND_S 24 +#define TTEXEC_EXTTRIGEN_BIT 0x00008000 +#define TTEXEC_EXTTRIGMATCH_BITS 0x00007F00 +#define TTEXEC_EXTTRIGMATCH_S 8 +#define TTEXEC_TCMODE_BITS 0x00000003 +#define TTEXEC_TCMODE_S 0 + +#define TTCTRL_REGNUM 1 +#define TTCTRL_TRACETT_BITS 0x00008000 +#define TTCTRL_TRACETT_S 15 +#define TTCTRL_TRACEALL_BITS 0x00002000 +#define TTCTRL_TRACEALL_S 13 +#ifdef METAC_2_1 +#define TTCTRL_TRACEALLTAG_BITS 0x00000400 +#define TTCTRL_TRACEALLTAG_S 10 +#endif /* METAC_2_1 */ +#define TTCTRL_TRACETAG_BITS 0x00000200 +#define TTCTRL_TRACETAG_S 9 +#define TTCTRL_TRACETTPC_BITS 0x00000080 +#define TTCTRL_TRACETTPC_S 7 +#define TTCTRL_TRACEMPC_BITS 0x00000020 +#define TTCTRL_TRACEMPC_S 5 +#define TTCTRL_TRACEEN_BITS 0x00000008 +#define TTCTRL_TRACEEN_S 3 +#define TTCTRL_TRACEEN1_BITS 0x00000004 +#define TTCTRL_TRACEEN1_S 2 +#define TTCTRL_TRACEPC_BITS 0x00000002 +#define TTCTRL_TRACEPC_S 1 + +#ifdef METAC_2_1 +#define TTMARK_REGNUM 2 +#define TTMARK_BITS 0xFFFFFFFF +#define TTMARK_S 0x0 + +#define TTREC_REGNUM 3 +#define TTREC_BITS 0xFFFFFFFFFFFFFFFF +#define TTREC_S 0x0 +#endif /* METAC_2_1 */ + +#define GTEXEC_REGNUM 4 +#define GTEXEC_DCRUN_BITS 0x80000000 +#define GTEXEC_DCRUN_S 31 +#define GTEXEC_ICMODE_BITS 0x0C000000 +#define GTEXEC_ICMODE_S 26 +#define GTEXEC_TCMODE_BITS 0x03000000 +#define GTEXEC_TCMODE_S 24 +#define GTEXEC_PERF1CMODE_BITS 0x00040000 +#define GTEXEC_PERF1CMODE_S 18 +#define GTEXEC_PERF0CMODE_BITS 0x00010000 +#define GTEXEC_PERF0CMODE_S 16 +#define GTEXEC_REFMSEL_BITS 0x0000F000 +#define GTEXEC_REFMSEL_S 12 +#define GTEXEC_METRICTH_BITS 0x000003FF +#define GTEXEC_METRICTH_S 0 + +#ifdef METAC_2_1 +/* + * Clock Control registers + * ----------------------- + */ +#define TXCLKCTRL_REGNUM 22 + +/* + * Default setting is with clocks always on (DEFON), turning all clocks off + * can only be done from external devices (OFF), enabling automatic clock + * gating will allow clocks to stop as units fall idle. + */ +#define TXCLKCTRL_ALL_OFF 0x02222222 +#define TXCLKCTRL_ALL_DEFON 0x01111111 +#define TXCLKCTRL_ALL_AUTO 0x02222222 + +/* + * Individual fields control caches, floating point and main data/addr units + */ +#define TXCLKCTRL_CLOCKIC_BITS 0x03000000 +#define TXCLKCTRL_CLOCKIC_S 24 +#define TXCLKCTRL_CLOCKDC_BITS 0x00300000 +#define TXCLKCTRL_CLOCKDC_S 20 +#define TXCLKCTRL_CLOCKFP_BITS 0x00030000 +#define TXCLKCTRL_CLOCKFP_S 16 +#define TXCLKCTRL_CLOCKD1_BITS 0x00003000 +#define TXCLKCTRL_CLOCKD1_S 12 +#define TXCLKCTRL_CLOCKD0_BITS 0x00000300 +#define TXCLKCTRL_CLOCKD0_S 8 +#define TXCLKCTRL_CLOCKA1_BITS 0x00000030 +#define TXCLKCTRL_CLOCKA1_S 4 +#define TXCLKCTRL_CLOCKA0_BITS 0x00000003 +#define TXCLKCTRL_CLOCKA0_S 0 + +/* + * Individual settings for each field are common + */ +#define TXCLKCTRL_CLOCKxx_OFF 0 +#define TXCLKCTRL_CLOCKxx_DEFON 1 +#define TXCLKCTRL_CLOCKxx_AUTO 2 + +#endif /* METAC_2_1 */ + +#ifdef METAC_2_1 +/* + * Fast interrupt new bits + * ------------------------------------ + */ +#define TXSTATUS_IPTOGGLE_BIT 0x80000000 /* Prev PToggle of TXPRIVEXT */ +#define TXSTATUS_ISTATE_BIT 0x40000000 /* IState bit */ +#define TXSTATUS_IWAIT_BIT 0x20000000 /* wait indefinitely in decision step*/ +#define TXSTATUS_IEXCEPT_BIT 0x10000000 /* Indicate an exception occured */ +#define TXSTATUS_IRPCOUNT_BITS 0x0E000000 /* Number of 'dirty' date entries*/ +#define TXSTATUS_IRPCOUNT_S 25 +#define TXSTATUS_IRQSTAT_BITS 0x0000F000 /* IRQEnc bits, trigger or interrupts */ +#define TXSTATUS_IRQSTAT_S 12 +#define TXSTATUS_LNKSETOK_BIT 0x00000020 /* LNKSetOK bit, successful LNKSET */ + +/* New fields in TXDE for fast interrupt system */ +#define TXDIVTIME_IACTIVE_BIT 0x00008000 /* Enable new interrupt system */ +#define TXDIVTIME_INONEST_BIT 0x00004000 /* Gate nested interrupt */ +#define TXDIVTIME_IREGIDXGATE_BIT 0x00002000 /* gate of the IRegIdex field */ +#define TXDIVTIME_IREGIDX_BITS 0x00001E00 /* Index of A0.0/1 replaces */ +#define TXDIVTIME_IREGIDX_S 9 +#define TXDIVTIME_NOST_BIT 0x00000100 /* disable superthreading bit */ +#endif + +#endif /* _ASM_METAG_REGS_H_ */ -- cgit v1.2.3-54-g00ecf