From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?= Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- arch/mips/alchemy/common/Makefile | 14 + arch/mips/alchemy/common/clock.c | 1116 +++++++++++++++++++++++++++++++++++ arch/mips/alchemy/common/dbdma.c | 1089 ++++++++++++++++++++++++++++++++++ arch/mips/alchemy/common/dma.c | 265 +++++++++ arch/mips/alchemy/common/gpiolib.c | 175 ++++++ arch/mips/alchemy/common/irq.c | 996 +++++++++++++++++++++++++++++++ arch/mips/alchemy/common/platform.c | 452 ++++++++++++++ arch/mips/alchemy/common/power.c | 132 +++++ arch/mips/alchemy/common/prom.c | 129 ++++ arch/mips/alchemy/common/setup.c | 94 +++ arch/mips/alchemy/common/sleeper.S | 270 +++++++++ arch/mips/alchemy/common/time.c | 176 ++++++ arch/mips/alchemy/common/usb.c | 626 ++++++++++++++++++++ arch/mips/alchemy/common/vss.c | 84 +++ 14 files changed, 5618 insertions(+) create mode 100644 arch/mips/alchemy/common/Makefile create mode 100644 arch/mips/alchemy/common/clock.c create mode 100644 arch/mips/alchemy/common/dbdma.c create mode 100644 arch/mips/alchemy/common/dma.c create mode 100644 arch/mips/alchemy/common/gpiolib.c create mode 100644 arch/mips/alchemy/common/irq.c create mode 100644 arch/mips/alchemy/common/platform.c create mode 100644 arch/mips/alchemy/common/power.c create mode 100644 arch/mips/alchemy/common/prom.c create mode 100644 arch/mips/alchemy/common/setup.c create mode 100644 arch/mips/alchemy/common/sleeper.S create mode 100644 arch/mips/alchemy/common/time.c create mode 100644 arch/mips/alchemy/common/usb.c create mode 100644 arch/mips/alchemy/common/vss.c (limited to 'arch/mips/alchemy/common') diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile new file mode 100644 index 000000000..f64744f3b --- /dev/null +++ b/arch/mips/alchemy/common/Makefile @@ -0,0 +1,14 @@ +# +# Copyright 2000, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. +# +# Makefile for the Alchemy Au1xx0 CPUs, generic files. +# + +obj-y += prom.o time.o clock.o platform.o power.o \ + setup.o sleeper.o dma.o dbdma.o vss.o irq.o usb.o + +# optional gpiolib support +ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),) + obj-$(CONFIG_GPIOLIB) += gpiolib.o +endif diff --git a/arch/mips/alchemy/common/clock.c b/arch/mips/alchemy/common/clock.c new file mode 100644 index 000000000..6a98d2cb4 --- /dev/null +++ b/arch/mips/alchemy/common/clock.c @@ -0,0 +1,1116 @@ +/* + * Alchemy clocks. + * + * Exposes all configurable internal clock sources to the clk framework. + * + * We have: + * - Root source, usually 12MHz supplied by an external crystal + * - 3 PLLs which generate multiples of root rate [AUX, CPU, AUX2] + * + * Dividers: + * - 6 clock dividers with: + * * selectable source [one of the PLLs], + * * output divided between [2 .. 512 in steps of 2] (!Au1300) + * or [1 .. 256 in steps of 1] (Au1300), + * * can be enabled individually. + * + * - up to 6 "internal" (fixed) consumers which: + * * take either AUXPLL or one of the above 6 dividers as input, + * * divide this input by 1, 2, or 4 (and 3 on Au1300). + * * can be disabled separately. + * + * Misc clocks: + * - sysbus clock: CPU core clock (CPUPLL) divided by 2, 3 or 4. + * depends on board design and should be set by bootloader, read-only. + * - peripheral clock: half the rate of sysbus clock, source for a lot + * of peripheral blocks, read-only. + * - memory clock: clk rate to main memory chips, depends on board + * design and is read-only, + * - lrclk: the static bus clock signal for synchronous operation. + * depends on board design, must be set by bootloader, + * but may be required to correctly configure devices attached to + * the static bus. The Au1000/1500/1100 manuals call it LCLK, on + * later models it's called RCLK. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* Base clock: 12MHz is the default in all databooks, and I haven't + * found any board yet which uses a different rate. + */ +#define ALCHEMY_ROOTCLK_RATE 12000000 + +/* + * the internal sources which can be driven by the PLLs and dividers. + * Names taken from the databooks, refer to them for more information, + * especially which ones are share a clock line. + */ +static const char * const alchemy_au1300_intclknames[] = { + "lcd_intclk", "gpemgp_clk", "maempe_clk", "maebsa_clk", + "EXTCLK0", "EXTCLK1" +}; + +static const char * const alchemy_au1200_intclknames[] = { + "lcd_intclk", NULL, NULL, NULL, "EXTCLK0", "EXTCLK1" +}; + +static const char * const alchemy_au1550_intclknames[] = { + "usb_clk", "psc0_intclk", "psc1_intclk", "pci_clko", + "EXTCLK0", "EXTCLK1" +}; + +static const char * const alchemy_au1100_intclknames[] = { + "usb_clk", "lcd_intclk", NULL, "i2s_clk", "EXTCLK0", "EXTCLK1" +}; + +static const char * const alchemy_au1500_intclknames[] = { + NULL, "usbd_clk", "usbh_clk", "pci_clko", "EXTCLK0", "EXTCLK1" +}; + +static const char * const alchemy_au1000_intclknames[] = { + "irda_clk", "usbd_clk", "usbh_clk", "i2s_clk", "EXTCLK0", + "EXTCLK1" +}; + +/* aliases for a few on-chip sources which are either shared + * or have gone through name changes. + */ +static struct clk_aliastable { + char *alias; + char *base; + int cputype; +} alchemy_clk_aliases[] __initdata = { + { "usbh_clk", "usb_clk", ALCHEMY_CPU_AU1100 }, + { "usbd_clk", "usb_clk", ALCHEMY_CPU_AU1100 }, + { "irda_clk", "usb_clk", ALCHEMY_CPU_AU1100 }, + { "usbh_clk", "usb_clk", ALCHEMY_CPU_AU1550 }, + { "usbd_clk", "usb_clk", ALCHEMY_CPU_AU1550 }, + { "psc2_intclk", "usb_clk", ALCHEMY_CPU_AU1550 }, + { "psc3_intclk", "EXTCLK0", ALCHEMY_CPU_AU1550 }, + { "psc0_intclk", "EXTCLK0", ALCHEMY_CPU_AU1200 }, + { "psc1_intclk", "EXTCLK1", ALCHEMY_CPU_AU1200 }, + { "psc0_intclk", "EXTCLK0", ALCHEMY_CPU_AU1300 }, + { "psc2_intclk", "EXTCLK0", ALCHEMY_CPU_AU1300 }, + { "psc1_intclk", "EXTCLK1", ALCHEMY_CPU_AU1300 }, + { "psc3_intclk", "EXTCLK1", ALCHEMY_CPU_AU1300 }, + + { NULL, NULL, 0 }, +}; + +#define IOMEM(x) ((void __iomem *)(KSEG1ADDR(CPHYSADDR(x)))) + +/* access locks to SYS_FREQCTRL0/1 and SYS_CLKSRC registers */ +static spinlock_t alchemy_clk_fg0_lock; +static spinlock_t alchemy_clk_fg1_lock; +static spinlock_t alchemy_clk_csrc_lock; + +/* CPU Core clock *****************************************************/ + +static unsigned long alchemy_clk_cpu_recalc(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long t; + + /* + * On early Au1000, sys_cpupll was write-only. Since these + * silicon versions of Au1000 are not sold, we don't bend + * over backwards trying to determine the frequency. + */ + if (unlikely(au1xxx_cpu_has_pll_wo())) + t = 396000000; + else { + t = alchemy_rdsys(AU1000_SYS_CPUPLL) & 0x7f; + if (alchemy_get_cputype() < ALCHEMY_CPU_AU1300) + t &= 0x3f; + t *= parent_rate; + } + + return t; +} + +void __init alchemy_set_lpj(void) +{ + preset_lpj = alchemy_clk_cpu_recalc(NULL, ALCHEMY_ROOTCLK_RATE); + preset_lpj /= 2 * HZ; +} + +static struct clk_ops alchemy_clkops_cpu = { + .recalc_rate = alchemy_clk_cpu_recalc, +}; + +static struct clk __init *alchemy_clk_setup_cpu(const char *parent_name, + int ctype) +{ + struct clk_init_data id; + struct clk_hw *h; + + h = kzalloc(sizeof(*h), GFP_KERNEL); + if (!h) + return ERR_PTR(-ENOMEM); + + id.name = ALCHEMY_CPU_CLK; + id.parent_names = &parent_name; + id.num_parents = 1; + id.flags = CLK_IS_BASIC; + id.ops = &alchemy_clkops_cpu; + h->init = &id; + + return clk_register(NULL, h); +} + +/* AUXPLLs ************************************************************/ + +struct alchemy_auxpll_clk { + struct clk_hw hw; + unsigned long reg; /* au1300 has also AUXPLL2 */ + int maxmult; /* max multiplier */ +}; +#define to_auxpll_clk(x) container_of(x, struct alchemy_auxpll_clk, hw) + +static unsigned long alchemy_clk_aux_recalc(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct alchemy_auxpll_clk *a = to_auxpll_clk(hw); + + return (alchemy_rdsys(a->reg) & 0xff) * parent_rate; +} + +static int alchemy_clk_aux_setr(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate) +{ + struct alchemy_auxpll_clk *a = to_auxpll_clk(hw); + unsigned long d = rate; + + if (rate) + d /= parent_rate; + else + d = 0; + + /* minimum is 84MHz, max is 756-1032 depending on variant */ + if (((d < 7) && (d != 0)) || (d > a->maxmult)) + return -EINVAL; + + alchemy_wrsys(d, a->reg); + return 0; +} + +static long alchemy_clk_aux_roundr(struct clk_hw *hw, + unsigned long rate, + unsigned long *parent_rate) +{ + struct alchemy_auxpll_clk *a = to_auxpll_clk(hw); + unsigned long mult; + + if (!rate || !*parent_rate) + return 0; + + mult = rate / (*parent_rate); + + if (mult && (mult < 7)) + mult = 7; + if (mult > a->maxmult) + mult = a->maxmult; + + return (*parent_rate) * mult; +} + +static struct clk_ops alchemy_clkops_aux = { + .recalc_rate = alchemy_clk_aux_recalc, + .set_rate = alchemy_clk_aux_setr, + .round_rate = alchemy_clk_aux_roundr, +}; + +static struct clk __init *alchemy_clk_setup_aux(const char *parent_name, + char *name, int maxmult, + unsigned long reg) +{ + struct clk_init_data id; + struct clk *c; + struct alchemy_auxpll_clk *a; + + a = kzalloc(sizeof(*a), GFP_KERNEL); + if (!a) + return ERR_PTR(-ENOMEM); + + id.name = name; + id.parent_names = &parent_name; + id.num_parents = 1; + id.flags = CLK_GET_RATE_NOCACHE; + id.ops = &alchemy_clkops_aux; + + a->reg = reg; + a->maxmult = maxmult; + a->hw.init = &id; + + c = clk_register(NULL, &a->hw); + if (!IS_ERR(c)) + clk_register_clkdev(c, name, NULL); + else + kfree(a); + + return c; +} + +/* sysbus_clk *********************************************************/ + +static struct clk __init *alchemy_clk_setup_sysbus(const char *pn) +{ + unsigned long v = (alchemy_rdsys(AU1000_SYS_POWERCTRL) & 3) + 2; + struct clk *c; + + c = clk_register_fixed_factor(NULL, ALCHEMY_SYSBUS_CLK, + pn, 0, 1, v); + if (!IS_ERR(c)) + clk_register_clkdev(c, ALCHEMY_SYSBUS_CLK, NULL); + return c; +} + +/* Peripheral Clock ***************************************************/ + +static struct clk __init *alchemy_clk_setup_periph(const char *pn) +{ + /* Peripheral clock runs at half the rate of sysbus clk */ + struct clk *c; + + c = clk_register_fixed_factor(NULL, ALCHEMY_PERIPH_CLK, + pn, 0, 1, 2); + if (!IS_ERR(c)) + clk_register_clkdev(c, ALCHEMY_PERIPH_CLK, NULL); + return c; +} + +/* mem clock **********************************************************/ + +static struct clk __init *alchemy_clk_setup_mem(const char *pn, int ct) +{ + void __iomem *addr = IOMEM(AU1000_MEM_PHYS_ADDR); + unsigned long v; + struct clk *c; + int div; + + switch (ct) { + case ALCHEMY_CPU_AU1550: + case ALCHEMY_CPU_AU1200: + v = __raw_readl(addr + AU1550_MEM_SDCONFIGB); + div = (v & (1 << 15)) ? 1 : 2; + break; + case ALCHEMY_CPU_AU1300: + v = __raw_readl(addr + AU1550_MEM_SDCONFIGB); + div = (v & (1 << 31)) ? 1 : 2; + break; + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1100: + default: + div = 2; + break; + } + + c = clk_register_fixed_factor(NULL, ALCHEMY_MEM_CLK, pn, + 0, 1, div); + if (!IS_ERR(c)) + clk_register_clkdev(c, ALCHEMY_MEM_CLK, NULL); + return c; +} + +/* lrclk: external synchronous static bus clock ***********************/ + +static struct clk __init *alchemy_clk_setup_lrclk(const char *pn, int t) +{ + /* Au1000, Au1500: MEM_STCFG0[11]: If bit is set, lrclk=pclk/5, + * otherwise lrclk=pclk/4. + * All other variants: MEM_STCFG0[15:13] = divisor. + * L/RCLK = periph_clk / (divisor + 1) + * On Au1000, Au1500, Au1100 it's called LCLK, + * on later models it's called RCLK, but it's the same thing. + */ + struct clk *c; + unsigned long v = alchemy_rdsmem(AU1000_MEM_STCFG0); + + switch (t) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + v = 4 + ((v >> 11) & 1); + break; + default: /* all other models */ + v = ((v >> 13) & 7) + 1; + } + c = clk_register_fixed_factor(NULL, ALCHEMY_LR_CLK, + pn, 0, 1, v); + if (!IS_ERR(c)) + clk_register_clkdev(c, ALCHEMY_LR_CLK, NULL); + return c; +} + +/* Clock dividers and muxes *******************************************/ + +/* data for fgen and csrc mux-dividers */ +struct alchemy_fgcs_clk { + struct clk_hw hw; + spinlock_t *reglock; /* register lock */ + unsigned long reg; /* SYS_FREQCTRL0/1 */ + int shift; /* offset in register */ + int parent; /* parent before disable [Au1300] */ + int isen; /* is it enabled? */ + int *dt; /* dividertable for csrc */ +}; +#define to_fgcs_clk(x) container_of(x, struct alchemy_fgcs_clk, hw) + +static long alchemy_calc_div(unsigned long rate, unsigned long prate, + int scale, int maxdiv, unsigned long *rv) +{ + long div1, div2; + + div1 = prate / rate; + if ((prate / div1) > rate) + div1++; + + if (scale == 2) { /* only div-by-multiple-of-2 possible */ + if (div1 & 1) + div1++; /* stay <=prate */ + } + + div2 = (div1 / scale) - 1; /* value to write to register */ + + if (div2 > maxdiv) + div2 = maxdiv; + if (rv) + *rv = div2; + + div1 = ((div2 + 1) * scale); + return div1; +} + +static long alchemy_clk_fgcs_detr(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate, + struct clk_hw **best_parent_clk, + int scale, int maxdiv) +{ + struct clk *pc, *bpc, *free; + long tdv, tpr, pr, nr, br, bpr, diff, lastdiff; + int j; + + lastdiff = INT_MAX; + bpr = 0; + bpc = NULL; + br = -EINVAL; + free = NULL; + + /* look at the rates each enabled parent supplies and select + * the one that gets closest to but not over the requested rate. + */ + for (j = 0; j < 7; j++) { + pc = clk_get_parent_by_index(hw->clk, j); + if (!pc) + break; + + /* if this parent is currently unused, remember it. + * XXX: we would actually want clk_has_active_children() + * but this is a good-enough approximation for now. + */ + if (!__clk_is_prepared(pc)) { + if (!free) + free = pc; + } + + pr = clk_get_rate(pc); + if (pr < rate) + continue; + + /* what can hardware actually provide */ + tdv = alchemy_calc_div(rate, pr, scale, maxdiv, NULL); + nr = pr / tdv; + diff = rate - nr; + if (nr > rate) + continue; + + if (diff < lastdiff) { + lastdiff = diff; + bpr = pr; + bpc = pc; + br = nr; + } + if (diff == 0) + break; + } + + /* if we couldn't get the exact rate we wanted from the enabled + * parents, maybe we can tell an available disabled/inactive one + * to give us a rate we can divide down to the requested rate. + */ + if (lastdiff && free) { + for (j = (maxdiv == 4) ? 1 : scale; j <= maxdiv; j += scale) { + tpr = rate * j; + if (tpr < 0) + break; + pr = clk_round_rate(free, tpr); + + tdv = alchemy_calc_div(rate, pr, scale, maxdiv, NULL); + nr = pr / tdv; + diff = rate - nr; + if (nr > rate) + continue; + if (diff < lastdiff) { + lastdiff = diff; + bpr = pr; + bpc = free; + br = nr; + } + if (diff == 0) + break; + } + } + + *best_parent_rate = bpr; + *best_parent_clk = __clk_get_hw(bpc); + return br; +} + +static int alchemy_clk_fgv1_en(struct clk_hw *hw) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + unsigned long v, flags; + + spin_lock_irqsave(c->reglock, flags); + v = alchemy_rdsys(c->reg); + v |= (1 << 1) << c->shift; + alchemy_wrsys(v, c->reg); + spin_unlock_irqrestore(c->reglock, flags); + + return 0; +} + +static int alchemy_clk_fgv1_isen(struct clk_hw *hw) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + unsigned long v = alchemy_rdsys(c->reg) >> (c->shift + 1); + + return v & 1; +} + +static void alchemy_clk_fgv1_dis(struct clk_hw *hw) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + unsigned long v, flags; + + spin_lock_irqsave(c->reglock, flags); + v = alchemy_rdsys(c->reg); + v &= ~((1 << 1) << c->shift); + alchemy_wrsys(v, c->reg); + spin_unlock_irqrestore(c->reglock, flags); +} + +static int alchemy_clk_fgv1_setp(struct clk_hw *hw, u8 index) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + unsigned long v, flags; + + spin_lock_irqsave(c->reglock, flags); + v = alchemy_rdsys(c->reg); + if (index) + v |= (1 << c->shift); + else + v &= ~(1 << c->shift); + alchemy_wrsys(v, c->reg); + spin_unlock_irqrestore(c->reglock, flags); + + return 0; +} + +static u8 alchemy_clk_fgv1_getp(struct clk_hw *hw) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + + return (alchemy_rdsys(c->reg) >> c->shift) & 1; +} + +static int alchemy_clk_fgv1_setr(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + unsigned long div, v, flags, ret; + int sh = c->shift + 2; + + if (!rate || !parent_rate || rate > (parent_rate / 2)) + return -EINVAL; + ret = alchemy_calc_div(rate, parent_rate, 2, 512, &div); + spin_lock_irqsave(c->reglock, flags); + v = alchemy_rdsys(c->reg); + v &= ~(0xff << sh); + v |= div << sh; + alchemy_wrsys(v, c->reg); + spin_unlock_irqrestore(c->reglock, flags); + + return 0; +} + +static unsigned long alchemy_clk_fgv1_recalc(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + unsigned long v = alchemy_rdsys(c->reg) >> (c->shift + 2); + + v = ((v & 0xff) + 1) * 2; + return parent_rate / v; +} + +static long alchemy_clk_fgv1_detr(struct clk_hw *hw, unsigned long rate, + unsigned long min_rate, + unsigned long max_rate, + unsigned long *best_parent_rate, + struct clk_hw **best_parent_clk) +{ + return alchemy_clk_fgcs_detr(hw, rate, best_parent_rate, + best_parent_clk, 2, 512); +} + +/* Au1000, Au1100, Au15x0, Au12x0 */ +static struct clk_ops alchemy_clkops_fgenv1 = { + .recalc_rate = alchemy_clk_fgv1_recalc, + .determine_rate = alchemy_clk_fgv1_detr, + .set_rate = alchemy_clk_fgv1_setr, + .set_parent = alchemy_clk_fgv1_setp, + .get_parent = alchemy_clk_fgv1_getp, + .enable = alchemy_clk_fgv1_en, + .disable = alchemy_clk_fgv1_dis, + .is_enabled = alchemy_clk_fgv1_isen, +}; + +static void __alchemy_clk_fgv2_en(struct alchemy_fgcs_clk *c) +{ + unsigned long v = alchemy_rdsys(c->reg); + + v &= ~(3 << c->shift); + v |= (c->parent & 3) << c->shift; + alchemy_wrsys(v, c->reg); + c->isen = 1; +} + +static int alchemy_clk_fgv2_en(struct clk_hw *hw) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + unsigned long flags; + + /* enable by setting the previous parent clock */ + spin_lock_irqsave(c->reglock, flags); + __alchemy_clk_fgv2_en(c); + spin_unlock_irqrestore(c->reglock, flags); + + return 0; +} + +static int alchemy_clk_fgv2_isen(struct clk_hw *hw) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + + return ((alchemy_rdsys(c->reg) >> c->shift) & 3) != 0; +} + +static void alchemy_clk_fgv2_dis(struct clk_hw *hw) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + unsigned long v, flags; + + spin_lock_irqsave(c->reglock, flags); + v = alchemy_rdsys(c->reg); + v &= ~(3 << c->shift); /* set input mux to "disabled" state */ + alchemy_wrsys(v, c->reg); + c->isen = 0; + spin_unlock_irqrestore(c->reglock, flags); +} + +static int alchemy_clk_fgv2_setp(struct clk_hw *hw, u8 index) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + unsigned long flags; + + spin_lock_irqsave(c->reglock, flags); + c->parent = index + 1; /* value to write to register */ + if (c->isen) + __alchemy_clk_fgv2_en(c); + spin_unlock_irqrestore(c->reglock, flags); + + return 0; +} + +static u8 alchemy_clk_fgv2_getp(struct clk_hw *hw) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + unsigned long flags, v; + + spin_lock_irqsave(c->reglock, flags); + v = c->parent - 1; + spin_unlock_irqrestore(c->reglock, flags); + return v; +} + +/* fg0-2 and fg4-6 share a "scale"-bit. With this bit cleared, the + * dividers behave exactly as on previous models (dividers are multiples + * of 2); with the bit set, dividers are multiples of 1, halving their + * range, but making them also much more flexible. + */ +static int alchemy_clk_fgv2_setr(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + int sh = c->shift + 2; + unsigned long div, v, flags, ret; + + if (!rate || !parent_rate || rate > parent_rate) + return -EINVAL; + + v = alchemy_rdsys(c->reg) & (1 << 30); /* test "scale" bit */ + ret = alchemy_calc_div(rate, parent_rate, v ? 1 : 2, + v ? 256 : 512, &div); + + spin_lock_irqsave(c->reglock, flags); + v = alchemy_rdsys(c->reg); + v &= ~(0xff << sh); + v |= (div & 0xff) << sh; + alchemy_wrsys(v, c->reg); + spin_unlock_irqrestore(c->reglock, flags); + + return 0; +} + +static unsigned long alchemy_clk_fgv2_recalc(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + int sh = c->shift + 2; + unsigned long v, t; + + v = alchemy_rdsys(c->reg); + t = parent_rate / (((v >> sh) & 0xff) + 1); + if ((v & (1 << 30)) == 0) /* test scale bit */ + t /= 2; + + return t; +} + +static long alchemy_clk_fgv2_detr(struct clk_hw *hw, unsigned long rate, + unsigned long min_rate, + unsigned long max_rate, + unsigned long *best_parent_rate, + struct clk_hw **best_parent_clk) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + int scale, maxdiv; + + if (alchemy_rdsys(c->reg) & (1 << 30)) { + scale = 1; + maxdiv = 256; + } else { + scale = 2; + maxdiv = 512; + } + + return alchemy_clk_fgcs_detr(hw, rate, best_parent_rate, + best_parent_clk, scale, maxdiv); +} + +/* Au1300 larger input mux, no separate disable bit, flexible divider */ +static struct clk_ops alchemy_clkops_fgenv2 = { + .recalc_rate = alchemy_clk_fgv2_recalc, + .determine_rate = alchemy_clk_fgv2_detr, + .set_rate = alchemy_clk_fgv2_setr, + .set_parent = alchemy_clk_fgv2_setp, + .get_parent = alchemy_clk_fgv2_getp, + .enable = alchemy_clk_fgv2_en, + .disable = alchemy_clk_fgv2_dis, + .is_enabled = alchemy_clk_fgv2_isen, +}; + +static const char * const alchemy_clk_fgv1_parents[] = { + ALCHEMY_CPU_CLK, ALCHEMY_AUXPLL_CLK +}; + +static const char * const alchemy_clk_fgv2_parents[] = { + ALCHEMY_AUXPLL2_CLK, ALCHEMY_CPU_CLK, ALCHEMY_AUXPLL_CLK +}; + +static const char * const alchemy_clk_fgen_names[] = { + ALCHEMY_FG0_CLK, ALCHEMY_FG1_CLK, ALCHEMY_FG2_CLK, + ALCHEMY_FG3_CLK, ALCHEMY_FG4_CLK, ALCHEMY_FG5_CLK }; + +static int __init alchemy_clk_init_fgens(int ctype) +{ + struct clk *c; + struct clk_init_data id; + struct alchemy_fgcs_clk *a; + unsigned long v; + int i, ret; + + switch (ctype) { + case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200: + id.ops = &alchemy_clkops_fgenv1; + id.parent_names = (const char **)alchemy_clk_fgv1_parents; + id.num_parents = 2; + break; + case ALCHEMY_CPU_AU1300: + id.ops = &alchemy_clkops_fgenv2; + id.parent_names = (const char **)alchemy_clk_fgv2_parents; + id.num_parents = 3; + break; + default: + return -ENODEV; + } + id.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE; + + a = kzalloc((sizeof(*a)) * 6, GFP_KERNEL); + if (!a) + return -ENOMEM; + + spin_lock_init(&alchemy_clk_fg0_lock); + spin_lock_init(&alchemy_clk_fg1_lock); + ret = 0; + for (i = 0; i < 6; i++) { + id.name = alchemy_clk_fgen_names[i]; + a->shift = 10 * (i < 3 ? i : i - 3); + if (i > 2) { + a->reg = AU1000_SYS_FREQCTRL1; + a->reglock = &alchemy_clk_fg1_lock; + } else { + a->reg = AU1000_SYS_FREQCTRL0; + a->reglock = &alchemy_clk_fg0_lock; + } + + /* default to first parent if bootloader has set + * the mux to disabled state. + */ + if (ctype == ALCHEMY_CPU_AU1300) { + v = alchemy_rdsys(a->reg); + a->parent = (v >> a->shift) & 3; + if (!a->parent) { + a->parent = 1; + a->isen = 0; + } else + a->isen = 1; + } + + a->hw.init = &id; + c = clk_register(NULL, &a->hw); + if (IS_ERR(c)) + ret++; + else + clk_register_clkdev(c, id.name, NULL); + a++; + } + + return ret; +} + +/* internal sources muxes *********************************************/ + +static int alchemy_clk_csrc_isen(struct clk_hw *hw) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + unsigned long v = alchemy_rdsys(c->reg); + + return (((v >> c->shift) >> 2) & 7) != 0; +} + +static void __alchemy_clk_csrc_en(struct alchemy_fgcs_clk *c) +{ + unsigned long v = alchemy_rdsys(c->reg); + + v &= ~((7 << 2) << c->shift); + v |= ((c->parent & 7) << 2) << c->shift; + alchemy_wrsys(v, c->reg); + c->isen = 1; +} + +static int alchemy_clk_csrc_en(struct clk_hw *hw) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + unsigned long flags; + + /* enable by setting the previous parent clock */ + spin_lock_irqsave(c->reglock, flags); + __alchemy_clk_csrc_en(c); + spin_unlock_irqrestore(c->reglock, flags); + + return 0; +} + +static void alchemy_clk_csrc_dis(struct clk_hw *hw) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + unsigned long v, flags; + + spin_lock_irqsave(c->reglock, flags); + v = alchemy_rdsys(c->reg); + v &= ~((3 << 2) << c->shift); /* mux to "disabled" state */ + alchemy_wrsys(v, c->reg); + c->isen = 0; + spin_unlock_irqrestore(c->reglock, flags); +} + +static int alchemy_clk_csrc_setp(struct clk_hw *hw, u8 index) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + unsigned long flags; + + spin_lock_irqsave(c->reglock, flags); + c->parent = index + 1; /* value to write to register */ + if (c->isen) + __alchemy_clk_csrc_en(c); + spin_unlock_irqrestore(c->reglock, flags); + + return 0; +} + +static u8 alchemy_clk_csrc_getp(struct clk_hw *hw) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + + return c->parent - 1; +} + +static unsigned long alchemy_clk_csrc_recalc(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + unsigned long v = (alchemy_rdsys(c->reg) >> c->shift) & 3; + + return parent_rate / c->dt[v]; +} + +static int alchemy_clk_csrc_setr(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + unsigned long d, v, flags; + int i; + + if (!rate || !parent_rate || rate > parent_rate) + return -EINVAL; + + d = (parent_rate + (rate / 2)) / rate; + if (d > 4) + return -EINVAL; + if ((d == 3) && (c->dt[2] != 3)) + d = 4; + + for (i = 0; i < 4; i++) + if (c->dt[i] == d) + break; + + if (i >= 4) + return -EINVAL; /* oops */ + + spin_lock_irqsave(c->reglock, flags); + v = alchemy_rdsys(c->reg); + v &= ~(3 << c->shift); + v |= (i & 3) << c->shift; + alchemy_wrsys(v, c->reg); + spin_unlock_irqrestore(c->reglock, flags); + + return 0; +} + +static long alchemy_clk_csrc_detr(struct clk_hw *hw, unsigned long rate, + unsigned long min_rate, + unsigned long max_rate, + unsigned long *best_parent_rate, + struct clk_hw **best_parent_clk) +{ + struct alchemy_fgcs_clk *c = to_fgcs_clk(hw); + int scale = c->dt[2] == 3 ? 1 : 2; /* au1300 check */ + + return alchemy_clk_fgcs_detr(hw, rate, best_parent_rate, + best_parent_clk, scale, 4); +} + +static struct clk_ops alchemy_clkops_csrc = { + .recalc_rate = alchemy_clk_csrc_recalc, + .determine_rate = alchemy_clk_csrc_detr, + .set_rate = alchemy_clk_csrc_setr, + .set_parent = alchemy_clk_csrc_setp, + .get_parent = alchemy_clk_csrc_getp, + .enable = alchemy_clk_csrc_en, + .disable = alchemy_clk_csrc_dis, + .is_enabled = alchemy_clk_csrc_isen, +}; + +static const char * const alchemy_clk_csrc_parents[] = { + /* disabled at index 0 */ ALCHEMY_AUXPLL_CLK, + ALCHEMY_FG0_CLK, ALCHEMY_FG1_CLK, ALCHEMY_FG2_CLK, + ALCHEMY_FG3_CLK, ALCHEMY_FG4_CLK, ALCHEMY_FG5_CLK +}; + +/* divider tables */ +static int alchemy_csrc_dt1[] = { 1, 4, 1, 2 }; /* rest */ +static int alchemy_csrc_dt2[] = { 1, 4, 3, 2 }; /* Au1300 */ + +static int __init alchemy_clk_setup_imux(int ctype) +{ + struct alchemy_fgcs_clk *a; + const char * const *names; + struct clk_init_data id; + unsigned long v; + int i, ret, *dt; + struct clk *c; + + id.ops = &alchemy_clkops_csrc; + id.parent_names = (const char **)alchemy_clk_csrc_parents; + id.num_parents = 7; + id.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE; + + dt = alchemy_csrc_dt1; + switch (ctype) { + case ALCHEMY_CPU_AU1000: + names = alchemy_au1000_intclknames; + break; + case ALCHEMY_CPU_AU1500: + names = alchemy_au1500_intclknames; + break; + case ALCHEMY_CPU_AU1100: + names = alchemy_au1100_intclknames; + break; + case ALCHEMY_CPU_AU1550: + names = alchemy_au1550_intclknames; + break; + case ALCHEMY_CPU_AU1200: + names = alchemy_au1200_intclknames; + break; + case ALCHEMY_CPU_AU1300: + dt = alchemy_csrc_dt2; + names = alchemy_au1300_intclknames; + break; + default: + return -ENODEV; + } + + a = kzalloc((sizeof(*a)) * 6, GFP_KERNEL); + if (!a) + return -ENOMEM; + + spin_lock_init(&alchemy_clk_csrc_lock); + ret = 0; + + for (i = 0; i < 6; i++) { + id.name = names[i]; + if (!id.name) + goto next; + + a->shift = i * 5; + a->reg = AU1000_SYS_CLKSRC; + a->reglock = &alchemy_clk_csrc_lock; + a->dt = dt; + + /* default to first parent clock if mux is initially + * set to disabled state. + */ + v = alchemy_rdsys(a->reg); + a->parent = ((v >> a->shift) >> 2) & 7; + if (!a->parent) { + a->parent = 1; + a->isen = 0; + } else + a->isen = 1; + + a->hw.init = &id; + c = clk_register(NULL, &a->hw); + if (IS_ERR(c)) + ret++; + else + clk_register_clkdev(c, id.name, NULL); +next: + a++; + } + + return ret; +} + + +/**********************************************************************/ + + +#define ERRCK(x) \ + if (IS_ERR(x)) { \ + ret = PTR_ERR(x); \ + goto out; \ + } + +static int __init alchemy_clk_init(void) +{ + int ctype = alchemy_get_cputype(), ret, i; + struct clk_aliastable *t = alchemy_clk_aliases; + struct clk *c; + + /* Root of the Alchemy clock tree: external 12MHz crystal osc */ + c = clk_register_fixed_rate(NULL, ALCHEMY_ROOT_CLK, NULL, + CLK_IS_ROOT, + ALCHEMY_ROOTCLK_RATE); + ERRCK(c) + + /* CPU core clock */ + c = alchemy_clk_setup_cpu(ALCHEMY_ROOT_CLK, ctype); + ERRCK(c) + + /* AUXPLLs: max 1GHz on Au1300, 748MHz on older models */ + i = (ctype == ALCHEMY_CPU_AU1300) ? 84 : 63; + c = alchemy_clk_setup_aux(ALCHEMY_ROOT_CLK, ALCHEMY_AUXPLL_CLK, + i, AU1000_SYS_AUXPLL); + ERRCK(c) + + if (ctype == ALCHEMY_CPU_AU1300) { + c = alchemy_clk_setup_aux(ALCHEMY_ROOT_CLK, + ALCHEMY_AUXPLL2_CLK, i, + AU1300_SYS_AUXPLL2); + ERRCK(c) + } + + /* sysbus clock: cpu core clock divided by 2, 3 or 4 */ + c = alchemy_clk_setup_sysbus(ALCHEMY_CPU_CLK); + ERRCK(c) + + /* peripheral clock: runs at half rate of sysbus clk */ + c = alchemy_clk_setup_periph(ALCHEMY_SYSBUS_CLK); + ERRCK(c) + + /* SDR/DDR memory clock */ + c = alchemy_clk_setup_mem(ALCHEMY_SYSBUS_CLK, ctype); + ERRCK(c) + + /* L/RCLK: external static bus clock for synchronous mode */ + c = alchemy_clk_setup_lrclk(ALCHEMY_PERIPH_CLK, ctype); + ERRCK(c) + + /* Frequency dividers 0-5 */ + ret = alchemy_clk_init_fgens(ctype); + if (ret) { + ret = -ENODEV; + goto out; + } + + /* diving muxes for internal sources */ + ret = alchemy_clk_setup_imux(ctype); + if (ret) { + ret = -ENODEV; + goto out; + } + + /* set up aliases drivers might look for */ + while (t->base) { + if (t->cputype == ctype) + clk_add_alias(t->alias, NULL, t->base, NULL); + t++; + } + + pr_info("Alchemy clocktree installed\n"); + return 0; + +out: + return ret; +} +postcore_initcall(alchemy_clk_init); diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c new file mode 100644 index 000000000..745695db5 --- /dev/null +++ b/arch/mips/alchemy/common/dbdma.c @@ -0,0 +1,1089 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * The Descriptor Based DMA channel manager that first appeared + * on the Au1550. I started with dma.c, but I think all that is + * left is this initial comment :-) + * + * Copyright 2004 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * The Descriptor Based DMA supports up to 16 channels. + * + * There are 32 devices defined. We keep an internal structure + * of devices using these channels, along with additional + * information. + * + * We allocate the descriptors and allow access to them through various + * functions. The drivers allocate the data buffers and assign them + * to the descriptors. + */ +static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock); + +/* I couldn't find a macro that did this... */ +#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1)) + +static dbdma_global_t *dbdma_gptr = + (dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); +static int dbdma_initialized; + +static dbdev_tab_t *dbdev_tab; + +static dbdev_tab_t au1550_dbdev_tab[] __initdata = { + /* UARTS */ + { AU1550_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, + { AU1550_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, + { AU1550_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 }, + { AU1550_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 }, + + /* EXT DMA */ + { AU1550_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 }, + + /* USB DEV */ + { AU1550_DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 }, + { AU1550_DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 }, + { AU1550_DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 }, + { AU1550_DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 }, + { AU1550_DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 }, + { AU1550_DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 }, + + /* PSCs */ + { AU1550_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 }, + + { AU1550_DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */ + { AU1550_DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */ + + /* MAC 0 */ + { AU1550_DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, + + /* MAC 1 */ + { AU1550_DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, + + { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, +}; + +static dbdev_tab_t au1200_dbdev_tab[] __initdata = { + { AU1200_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, + { AU1200_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, + { AU1200_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 }, + { AU1200_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 }, + + { AU1200_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, + + { AU1200_DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + { AU1200_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 }, + { AU1200_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 }, + { AU1200_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 }, + { AU1200_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 }, + + { AU1200_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 }, + { AU1200_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 }, + + { AU1200_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 }, + { AU1200_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 }, + { AU1200_DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 }, + { AU1200_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 }, + { AU1200_DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + { AU1200_DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 }, + { AU1200_DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 }, + { AU1200_DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 }, + { AU1200_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + { AU1200_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + + { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, +}; + +static dbdev_tab_t au1300_dbdev_tab[] __initdata = { + { AU1300_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x10100004, 0, 0 }, + { AU1300_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x10100000, 0, 0 }, + { AU1300_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x10101004, 0, 0 }, + { AU1300_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x10101000, 0, 0 }, + { AU1300_DSCR_CMD0_UART2_TX, DEV_FLAGS_OUT, 0, 8, 0x10102004, 0, 0 }, + { AU1300_DSCR_CMD0_UART2_RX, DEV_FLAGS_IN, 0, 8, 0x10102000, 0, 0 }, + { AU1300_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x10103004, 0, 0 }, + { AU1300_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x10103000, 0, 0 }, + + { AU1300_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 }, + { AU1300_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 }, + { AU1300_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 8, 8, 0x10601000, 0, 0 }, + { AU1300_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 8, 8, 0x10601004, 0, 0 }, + + { AU1300_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 }, + { AU1300_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 }, + + { AU1300_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0001c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x10a0001c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0101c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x10a0101c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0201c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 16, 0x10a0201c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0301c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 16, 0x10a0301c, 0, 0 }, + + { AU1300_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1300_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + + { AU1300_DSCR_CMD0_SDMS_TX2, DEV_FLAGS_OUT, 4, 8, 0x10602000, 0, 0 }, + { AU1300_DSCR_CMD0_SDMS_RX2, DEV_FLAGS_IN, 4, 8, 0x10602004, 0, 0 }, + + { AU1300_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + { AU1300_DSCR_CMD0_UDMA, DEV_FLAGS_ANYUSE, 0, 32, 0x14001810, 0, 0 }, + + { AU1300_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1300_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, + + { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, +}; + +/* 32 predefined plus 32 custom */ +#define DBDEV_TAB_SIZE 64 + +static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS]; + +static dbdev_tab_t *find_dbdev_id(u32 id) +{ + int i; + dbdev_tab_t *p; + for (i = 0; i < DBDEV_TAB_SIZE; ++i) { + p = &dbdev_tab[i]; + if (p->dev_id == id) + return p; + } + return NULL; +} + +void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp) +{ + return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); +} +EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt); + +u32 au1xxx_ddma_add_device(dbdev_tab_t *dev) +{ + u32 ret = 0; + dbdev_tab_t *p; + static u16 new_id = 0x1000; + + p = find_dbdev_id(~0); + if (NULL != p) { + memcpy(p, dev, sizeof(dbdev_tab_t)); + p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id); + ret = p->dev_id; + new_id++; +#if 0 + printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n", + p->dev_id, p->dev_flags, p->dev_physaddr); +#endif + } + + return ret; +} +EXPORT_SYMBOL(au1xxx_ddma_add_device); + +void au1xxx_ddma_del_device(u32 devid) +{ + dbdev_tab_t *p = find_dbdev_id(devid); + + if (p != NULL) { + memset(p, 0, sizeof(dbdev_tab_t)); + p->dev_id = ~0; + } +} +EXPORT_SYMBOL(au1xxx_ddma_del_device); + +/* Allocate a channel and return a non-zero descriptor if successful. */ +u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, + void (*callback)(int, void *), void *callparam) +{ + unsigned long flags; + u32 used, chan; + u32 dcp; + int i; + dbdev_tab_t *stp, *dtp; + chan_tab_t *ctp; + au1x_dma_chan_t *cp; + + /* + * We do the intialization on the first channel allocation. + * We have to wait because of the interrupt handler initialization + * which can't be done successfully during board set up. + */ + if (!dbdma_initialized) + return 0; + + stp = find_dbdev_id(srcid); + if (stp == NULL) + return 0; + dtp = find_dbdev_id(destid); + if (dtp == NULL) + return 0; + + used = 0; + + /* Check to see if we can get both channels. */ + spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); + if (!(stp->dev_flags & DEV_FLAGS_INUSE) || + (stp->dev_flags & DEV_FLAGS_ANYUSE)) { + /* Got source */ + stp->dev_flags |= DEV_FLAGS_INUSE; + if (!(dtp->dev_flags & DEV_FLAGS_INUSE) || + (dtp->dev_flags & DEV_FLAGS_ANYUSE)) { + /* Got destination */ + dtp->dev_flags |= DEV_FLAGS_INUSE; + } else { + /* Can't get dest. Release src. */ + stp->dev_flags &= ~DEV_FLAGS_INUSE; + used++; + } + } else + used++; + spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); + + if (used) + return 0; + + /* Let's see if we can allocate a channel for it. */ + ctp = NULL; + chan = 0; + spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); + for (i = 0; i < NUM_DBDMA_CHANS; i++) + if (chan_tab_ptr[i] == NULL) { + /* + * If kmalloc fails, it is caught below same + * as a channel not available. + */ + ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC); + chan_tab_ptr[i] = ctp; + break; + } + spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); + + if (ctp != NULL) { + memset(ctp, 0, sizeof(chan_tab_t)); + ctp->chan_index = chan = i; + dcp = KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR); + dcp += (0x0100 * chan); + ctp->chan_ptr = (au1x_dma_chan_t *)dcp; + cp = (au1x_dma_chan_t *)dcp; + ctp->chan_src = stp; + ctp->chan_dest = dtp; + ctp->chan_callback = callback; + ctp->chan_callparam = callparam; + + /* Initialize channel configuration. */ + i = 0; + if (stp->dev_intlevel) + i |= DDMA_CFG_SED; + if (stp->dev_intpolarity) + i |= DDMA_CFG_SP; + if (dtp->dev_intlevel) + i |= DDMA_CFG_DED; + if (dtp->dev_intpolarity) + i |= DDMA_CFG_DP; + if ((stp->dev_flags & DEV_FLAGS_SYNC) || + (dtp->dev_flags & DEV_FLAGS_SYNC)) + i |= DDMA_CFG_SYNC; + cp->ddma_cfg = i; + wmb(); /* drain writebuffer */ + + /* + * Return a non-zero value that can be used to find the channel + * information in subsequent operations. + */ + return (u32)(&chan_tab_ptr[chan]); + } + + /* Release devices */ + stp->dev_flags &= ~DEV_FLAGS_INUSE; + dtp->dev_flags &= ~DEV_FLAGS_INUSE; + + return 0; +} +EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc); + +/* + * Set the device width if source or destination is a FIFO. + * Should be 8, 16, or 32 bits. + */ +u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits) +{ + u32 rv; + chan_tab_t *ctp; + dbdev_tab_t *stp, *dtp; + + ctp = *((chan_tab_t **)chanid); + stp = ctp->chan_src; + dtp = ctp->chan_dest; + rv = 0; + + if (stp->dev_flags & DEV_FLAGS_IN) { /* Source in fifo */ + rv = stp->dev_devwidth; + stp->dev_devwidth = bits; + } + if (dtp->dev_flags & DEV_FLAGS_OUT) { /* Destination out fifo */ + rv = dtp->dev_devwidth; + dtp->dev_devwidth = bits; + } + + return rv; +} +EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth); + +/* Allocate a descriptor ring, initializing as much as possible. */ +u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries) +{ + int i; + u32 desc_base, srcid, destid; + u32 cmd0, cmd1, src1, dest1; + u32 src0, dest0; + chan_tab_t *ctp; + dbdev_tab_t *stp, *dtp; + au1x_ddma_desc_t *dp; + + /* + * I guess we could check this to be within the + * range of the table...... + */ + ctp = *((chan_tab_t **)chanid); + stp = ctp->chan_src; + dtp = ctp->chan_dest; + + /* + * The descriptors must be 32-byte aligned. There is a + * possibility the allocation will give us such an address, + * and if we try that first we are likely to not waste larger + * slabs of memory. + */ + desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), + GFP_KERNEL|GFP_DMA); + if (desc_base == 0) + return 0; + + if (desc_base & 0x1f) { + /* + * Lost....do it again, allocate extra, and round + * the address base. + */ + kfree((const void *)desc_base); + i = entries * sizeof(au1x_ddma_desc_t); + i += (sizeof(au1x_ddma_desc_t) - 1); + desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA); + if (desc_base == 0) + return 0; + + ctp->cdb_membase = desc_base; + desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t)); + } else + ctp->cdb_membase = desc_base; + + dp = (au1x_ddma_desc_t *)desc_base; + + /* Keep track of the base descriptor. */ + ctp->chan_desc_base = dp; + + /* Initialize the rings with as much information as we know. */ + srcid = stp->dev_id; + destid = dtp->dev_id; + + cmd0 = cmd1 = src1 = dest1 = 0; + src0 = dest0 = 0; + + cmd0 |= DSCR_CMD0_SID(srcid); + cmd0 |= DSCR_CMD0_DID(destid); + cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV; + cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE); + + /* Is it mem to mem transfer? */ + if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) || + (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) && + ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) || + (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS))) + cmd0 |= DSCR_CMD0_MEM; + + switch (stp->dev_devwidth) { + case 8: + cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_BYTE); + break; + case 16: + cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_HALFWORD); + break; + case 32: + default: + cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_WORD); + break; + } + + switch (dtp->dev_devwidth) { + case 8: + cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_BYTE); + break; + case 16: + cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_HALFWORD); + break; + case 32: + default: + cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_WORD); + break; + } + + /* + * If the device is marked as an in/out FIFO, ensure it is + * set non-coherent. + */ + if (stp->dev_flags & DEV_FLAGS_IN) + cmd0 |= DSCR_CMD0_SN; /* Source in FIFO */ + if (dtp->dev_flags & DEV_FLAGS_OUT) + cmd0 |= DSCR_CMD0_DN; /* Destination out FIFO */ + + /* + * Set up source1. For now, assume no stride and increment. + * A channel attribute update can change this later. + */ + switch (stp->dev_tsize) { + case 1: + src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE1); + break; + case 2: + src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE2); + break; + case 4: + src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE4); + break; + case 8: + default: + src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE8); + break; + } + + /* If source input is FIFO, set static address. */ + if (stp->dev_flags & DEV_FLAGS_IN) { + if (stp->dev_flags & DEV_FLAGS_BURSTABLE) + src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST); + else + src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC); + } + + if (stp->dev_physaddr) + src0 = stp->dev_physaddr; + + /* + * Set up dest1. For now, assume no stride and increment. + * A channel attribute update can change this later. + */ + switch (dtp->dev_tsize) { + case 1: + dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE1); + break; + case 2: + dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE2); + break; + case 4: + dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE4); + break; + case 8: + default: + dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE8); + break; + } + + /* If destination output is FIFO, set static address. */ + if (dtp->dev_flags & DEV_FLAGS_OUT) { + if (dtp->dev_flags & DEV_FLAGS_BURSTABLE) + dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST); + else + dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC); + } + + if (dtp->dev_physaddr) + dest0 = dtp->dev_physaddr; + +#if 0 + printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x " + "source1:%x dest0:%x dest1:%x\n", + dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, + src1, dest0, dest1); +#endif + for (i = 0; i < entries; i++) { + dp->dscr_cmd0 = cmd0; + dp->dscr_cmd1 = cmd1; + dp->dscr_source0 = src0; + dp->dscr_source1 = src1; + dp->dscr_dest0 = dest0; + dp->dscr_dest1 = dest1; + dp->dscr_stat = 0; + dp->sw_context = 0; + dp->sw_status = 0; + dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1)); + dp++; + } + + /* Make last descrptor point to the first. */ + dp--; + dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base)); + ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base; + + return (u32)ctp->chan_desc_base; +} +EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc); + +/* + * Put a source buffer into the DMA ring. + * This updates the source pointer and byte count. Normally used + * for memory to fifo transfers. + */ +u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + + /* + * I guess we could check this to be within the + * range of the table...... + */ + ctp = *(chan_tab_t **)chanid; + + /* + * We should have multiple callers for a particular channel, + * an interrupt doesn't affect this pointer nor the descriptor, + * so no locking should be needed. + */ + dp = ctp->put_ptr; + + /* + * If the descriptor is valid, we are way ahead of the DMA + * engine, so just return an error condition. + */ + if (dp->dscr_cmd0 & DSCR_CMD0_V) + return 0; + + /* Load up buffer address and byte count. */ + dp->dscr_source0 = buf & ~0UL; + dp->dscr_cmd1 = nbytes; + /* Check flags */ + if (flags & DDMA_FLAGS_IE) + dp->dscr_cmd0 |= DSCR_CMD0_IE; + if (flags & DDMA_FLAGS_NOIE) + dp->dscr_cmd0 &= ~DSCR_CMD0_IE; + + /* + * There is an errata on the Au1200/Au1550 parts that could result + * in "stale" data being DMA'ed. It has to do with the snoop logic on + * the cache eviction buffer. DMA_NONCOHERENT is on by default for + * these parts. If it is fixed in the future, these dma_cache_inv will + * just be nothing more than empty macros. See io.h. + */ + dma_cache_wback_inv((unsigned long)buf, nbytes); + dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ + wmb(); /* drain writebuffer */ + dma_cache_wback_inv((unsigned long)dp, sizeof(*dp)); + ctp->chan_ptr->ddma_dbell = 0; + + /* Get next descriptor pointer. */ + ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + + /* Return something non-zero. */ + return nbytes; +} +EXPORT_SYMBOL(au1xxx_dbdma_put_source); + +/* Put a destination buffer into the DMA ring. + * This updates the destination pointer and byte count. Normally used + * to place an empty buffer into the ring for fifo to memory transfers. + */ +u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + + /* I guess we could check this to be within the + * range of the table...... + */ + ctp = *((chan_tab_t **)chanid); + + /* We should have multiple callers for a particular channel, + * an interrupt doesn't affect this pointer nor the descriptor, + * so no locking should be needed. + */ + dp = ctp->put_ptr; + + /* If the descriptor is valid, we are way ahead of the DMA + * engine, so just return an error condition. + */ + if (dp->dscr_cmd0 & DSCR_CMD0_V) + return 0; + + /* Load up buffer address and byte count */ + + /* Check flags */ + if (flags & DDMA_FLAGS_IE) + dp->dscr_cmd0 |= DSCR_CMD0_IE; + if (flags & DDMA_FLAGS_NOIE) + dp->dscr_cmd0 &= ~DSCR_CMD0_IE; + + dp->dscr_dest0 = buf & ~0UL; + dp->dscr_cmd1 = nbytes; +#if 0 + printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", + dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0, + dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1); +#endif + /* + * There is an errata on the Au1200/Au1550 parts that could result in + * "stale" data being DMA'ed. It has to do with the snoop logic on the + * cache eviction buffer. DMA_NONCOHERENT is on by default for these + * parts. If it is fixed in the future, these dma_cache_inv will just + * be nothing more than empty macros. See io.h. + */ + dma_cache_inv((unsigned long)buf, nbytes); + dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ + wmb(); /* drain writebuffer */ + dma_cache_wback_inv((unsigned long)dp, sizeof(*dp)); + ctp->chan_ptr->ddma_dbell = 0; + + /* Get next descriptor pointer. */ + ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + + /* Return something non-zero. */ + return nbytes; +} +EXPORT_SYMBOL(au1xxx_dbdma_put_dest); + +/* + * Get a destination buffer into the DMA ring. + * Normally used to get a full buffer from the ring during fifo + * to memory transfers. This does not set the valid bit, you will + * have to put another destination buffer to keep the DMA going. + */ +u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + u32 rv; + + /* + * I guess we could check this to be within the + * range of the table...... + */ + ctp = *((chan_tab_t **)chanid); + + /* + * We should have multiple callers for a particular channel, + * an interrupt doesn't affect this pointer nor the descriptor, + * so no locking should be needed. + */ + dp = ctp->get_ptr; + + /* + * If the descriptor is valid, we are way ahead of the DMA + * engine, so just return an error condition. + */ + if (dp->dscr_cmd0 & DSCR_CMD0_V) + return 0; + + /* Return buffer address and byte count. */ + *buf = (void *)(phys_to_virt(dp->dscr_dest0)); + *nbytes = dp->dscr_cmd1; + rv = dp->dscr_stat; + + /* Get next descriptor pointer. */ + ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + + /* Return something non-zero. */ + return rv; +} +EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest); + +void au1xxx_dbdma_stop(u32 chanid) +{ + chan_tab_t *ctp; + au1x_dma_chan_t *cp; + int halt_timeout = 0; + + ctp = *((chan_tab_t **)chanid); + + cp = ctp->chan_ptr; + cp->ddma_cfg &= ~DDMA_CFG_EN; /* Disable channel */ + wmb(); /* drain writebuffer */ + while (!(cp->ddma_stat & DDMA_STAT_H)) { + udelay(1); + halt_timeout++; + if (halt_timeout > 100) { + printk(KERN_WARNING "warning: DMA channel won't halt\n"); + break; + } + } + /* clear current desc valid and doorbell */ + cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V); + wmb(); /* drain writebuffer */ +} +EXPORT_SYMBOL(au1xxx_dbdma_stop); + +/* + * Start using the current descriptor pointer. If the DBDMA encounters + * a non-valid descriptor, it will stop. In this case, we can just + * continue by adding a buffer to the list and starting again. + */ +void au1xxx_dbdma_start(u32 chanid) +{ + chan_tab_t *ctp; + au1x_dma_chan_t *cp; + + ctp = *((chan_tab_t **)chanid); + cp = ctp->chan_ptr; + cp->ddma_desptr = virt_to_phys(ctp->cur_ptr); + cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */ + wmb(); /* drain writebuffer */ + cp->ddma_dbell = 0; + wmb(); /* drain writebuffer */ +} +EXPORT_SYMBOL(au1xxx_dbdma_start); + +void au1xxx_dbdma_reset(u32 chanid) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + + au1xxx_dbdma_stop(chanid); + + ctp = *((chan_tab_t **)chanid); + ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base; + + /* Run through the descriptors and reset the valid indicator. */ + dp = ctp->chan_desc_base; + + do { + dp->dscr_cmd0 &= ~DSCR_CMD0_V; + /* + * Reset our software status -- this is used to determine + * if a descriptor is in use by upper level software. Since + * posting can reset 'V' bit. + */ + dp->sw_status = 0; + dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + } while (dp != ctp->chan_desc_base); +} +EXPORT_SYMBOL(au1xxx_dbdma_reset); + +u32 au1xxx_get_dma_residue(u32 chanid) +{ + chan_tab_t *ctp; + au1x_dma_chan_t *cp; + u32 rv; + + ctp = *((chan_tab_t **)chanid); + cp = ctp->chan_ptr; + + /* This is only valid if the channel is stopped. */ + rv = cp->ddma_bytecnt; + wmb(); /* drain writebuffer */ + + return rv; +} +EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue); + +void au1xxx_dbdma_chan_free(u32 chanid) +{ + chan_tab_t *ctp; + dbdev_tab_t *stp, *dtp; + + ctp = *((chan_tab_t **)chanid); + stp = ctp->chan_src; + dtp = ctp->chan_dest; + + au1xxx_dbdma_stop(chanid); + + kfree((void *)ctp->cdb_membase); + + stp->dev_flags &= ~DEV_FLAGS_INUSE; + dtp->dev_flags &= ~DEV_FLAGS_INUSE; + chan_tab_ptr[ctp->chan_index] = NULL; + + kfree(ctp); +} +EXPORT_SYMBOL(au1xxx_dbdma_chan_free); + +static irqreturn_t dbdma_interrupt(int irq, void *dev_id) +{ + u32 intstat; + u32 chan_index; + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + au1x_dma_chan_t *cp; + + intstat = dbdma_gptr->ddma_intstat; + wmb(); /* drain writebuffer */ + chan_index = __ffs(intstat); + + ctp = chan_tab_ptr[chan_index]; + cp = ctp->chan_ptr; + dp = ctp->cur_ptr; + + /* Reset interrupt. */ + cp->ddma_irq = 0; + wmb(); /* drain writebuffer */ + + if (ctp->chan_callback) + ctp->chan_callback(irq, ctp->chan_callparam); + + ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + return IRQ_RETVAL(1); +} + +void au1xxx_dbdma_dump(u32 chanid) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + dbdev_tab_t *stp, *dtp; + au1x_dma_chan_t *cp; + u32 i = 0; + + ctp = *((chan_tab_t **)chanid); + stp = ctp->chan_src; + dtp = ctp->chan_dest; + cp = ctp->chan_ptr; + + printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d)\n", + (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp, + dtp - dbdev_tab); + printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n", + (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr), + (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr)); + + printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp); + printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n", + cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr); + printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n", + cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat, + cp->ddma_bytecnt); + + /* Run through the descriptors */ + dp = ctp->chan_desc_base; + + do { + printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n", + i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1); + printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n", + dp->dscr_source0, dp->dscr_source1, + dp->dscr_dest0, dp->dscr_dest1); + printk(KERN_DEBUG "stat %08x, nxtptr %08x\n", + dp->dscr_stat, dp->dscr_nxtptr); + dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + } while (dp != ctp->chan_desc_base); +} + +/* Put a descriptor into the DMA ring. + * This updates the source/destination pointers and byte count. + */ +u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + u32 nbytes = 0; + + /* + * I guess we could check this to be within the + * range of the table...... + */ + ctp = *((chan_tab_t **)chanid); + + /* + * We should have multiple callers for a particular channel, + * an interrupt doesn't affect this pointer nor the descriptor, + * so no locking should be needed. + */ + dp = ctp->put_ptr; + + /* + * If the descriptor is valid, we are way ahead of the DMA + * engine, so just return an error condition. + */ + if (dp->dscr_cmd0 & DSCR_CMD0_V) + return 0; + + /* Load up buffer addresses and byte count. */ + dp->dscr_dest0 = dscr->dscr_dest0; + dp->dscr_source0 = dscr->dscr_source0; + dp->dscr_dest1 = dscr->dscr_dest1; + dp->dscr_source1 = dscr->dscr_source1; + dp->dscr_cmd1 = dscr->dscr_cmd1; + nbytes = dscr->dscr_cmd1; + /* Allow the caller to specifiy if an interrupt is generated */ + dp->dscr_cmd0 &= ~DSCR_CMD0_IE; + dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V; + ctp->chan_ptr->ddma_dbell = 0; + + /* Get next descriptor pointer. */ + ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + + /* Return something non-zero. */ + return nbytes; +} + + +static unsigned long alchemy_dbdma_pm_data[NUM_DBDMA_CHANS + 1][6]; + +static int alchemy_dbdma_suspend(void) +{ + int i; + void __iomem *addr; + + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); + alchemy_dbdma_pm_data[0][0] = __raw_readl(addr + 0x00); + alchemy_dbdma_pm_data[0][1] = __raw_readl(addr + 0x04); + alchemy_dbdma_pm_data[0][2] = __raw_readl(addr + 0x08); + alchemy_dbdma_pm_data[0][3] = __raw_readl(addr + 0x0c); + + /* save channel configurations */ + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR); + for (i = 1; i <= NUM_DBDMA_CHANS; i++) { + alchemy_dbdma_pm_data[i][0] = __raw_readl(addr + 0x00); + alchemy_dbdma_pm_data[i][1] = __raw_readl(addr + 0x04); + alchemy_dbdma_pm_data[i][2] = __raw_readl(addr + 0x08); + alchemy_dbdma_pm_data[i][3] = __raw_readl(addr + 0x0c); + alchemy_dbdma_pm_data[i][4] = __raw_readl(addr + 0x10); + alchemy_dbdma_pm_data[i][5] = __raw_readl(addr + 0x14); + + /* halt channel */ + __raw_writel(alchemy_dbdma_pm_data[i][0] & ~1, addr + 0x00); + wmb(); + while (!(__raw_readl(addr + 0x14) & 1)) + wmb(); + + addr += 0x100; /* next channel base */ + } + /* disable channel interrupts */ + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); + __raw_writel(0, addr + 0x0c); + wmb(); + + return 0; +} + +static void alchemy_dbdma_resume(void) +{ + int i; + void __iomem *addr; + + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); + __raw_writel(alchemy_dbdma_pm_data[0][0], addr + 0x00); + __raw_writel(alchemy_dbdma_pm_data[0][1], addr + 0x04); + __raw_writel(alchemy_dbdma_pm_data[0][2], addr + 0x08); + __raw_writel(alchemy_dbdma_pm_data[0][3], addr + 0x0c); + + /* restore channel configurations */ + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR); + for (i = 1; i <= NUM_DBDMA_CHANS; i++) { + __raw_writel(alchemy_dbdma_pm_data[i][0], addr + 0x00); + __raw_writel(alchemy_dbdma_pm_data[i][1], addr + 0x04); + __raw_writel(alchemy_dbdma_pm_data[i][2], addr + 0x08); + __raw_writel(alchemy_dbdma_pm_data[i][3], addr + 0x0c); + __raw_writel(alchemy_dbdma_pm_data[i][4], addr + 0x10); + __raw_writel(alchemy_dbdma_pm_data[i][5], addr + 0x14); + wmb(); + addr += 0x100; /* next channel base */ + } +} + +static struct syscore_ops alchemy_dbdma_syscore_ops = { + .suspend = alchemy_dbdma_suspend, + .resume = alchemy_dbdma_resume, +}; + +static int __init dbdma_setup(unsigned int irq, dbdev_tab_t *idtable) +{ + int ret; + + dbdev_tab = kzalloc(sizeof(dbdev_tab_t) * DBDEV_TAB_SIZE, GFP_KERNEL); + if (!dbdev_tab) + return -ENOMEM; + + memcpy(dbdev_tab, idtable, 32 * sizeof(dbdev_tab_t)); + for (ret = 32; ret < DBDEV_TAB_SIZE; ret++) + dbdev_tab[ret].dev_id = ~0; + + dbdma_gptr->ddma_config = 0; + dbdma_gptr->ddma_throttle = 0; + dbdma_gptr->ddma_inten = 0xffff; + wmb(); /* drain writebuffer */ + + ret = request_irq(irq, dbdma_interrupt, 0, "dbdma", (void *)dbdma_gptr); + if (ret) + printk(KERN_ERR "Cannot grab DBDMA interrupt!\n"); + else { + dbdma_initialized = 1; + register_syscore_ops(&alchemy_dbdma_syscore_ops); + } + + return ret; +} + +static int __init alchemy_dbdma_init(void) +{ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1550: + return dbdma_setup(AU1550_DDMA_INT, au1550_dbdev_tab); + case ALCHEMY_CPU_AU1200: + return dbdma_setup(AU1200_DDMA_INT, au1200_dbdev_tab); + case ALCHEMY_CPU_AU1300: + return dbdma_setup(AU1300_DDMA_INT, au1300_dbdev_tab); + } + return 0; +} +subsys_initcall(alchemy_dbdma_init); diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c new file mode 100644 index 000000000..4fb6207b8 --- /dev/null +++ b/arch/mips/alchemy/common/dma.c @@ -0,0 +1,265 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * A DMA channel allocator for Au1x00. API is modeled loosely off of + * linux/kernel/dma.c. + * + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +/* + * A note on resource allocation: + * + * All drivers needing DMA channels, should allocate and release them + * through the public routines `request_dma()' and `free_dma()'. + * + * In order to avoid problems, all processes should allocate resources in + * the same sequence and release them in the reverse order. + * + * So, when allocating DMAs and IRQs, first allocate the DMA, then the IRQ. + * When releasing them, first release the IRQ, then release the DMA. The + * main reason for this order is that, if you are requesting the DMA buffer + * done interrupt, you won't know the irq number until the DMA channel is + * returned from request_dma. + */ + +/* DMA Channel register block spacing */ +#define DMA_CHANNEL_LEN 0x00000100 + +DEFINE_SPINLOCK(au1000_dma_spin_lock); + +struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = { + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,} +}; +EXPORT_SYMBOL(au1000_dma_table); + +/* Device FIFO addresses and default DMA modes */ +static const struct dma_dev { + unsigned int fifo_addr; + unsigned int dma_mode; +} dma_dev_table[DMA_NUM_DEV] = { + { AU1000_UART0_PHYS_ADDR + 0x04, DMA_DW8 }, /* UART0_TX */ + { AU1000_UART0_PHYS_ADDR + 0x00, DMA_DW8 | DMA_DR }, /* UART0_RX */ + { 0, 0 }, /* DMA_REQ0 */ + { 0, 0 }, /* DMA_REQ1 */ + { AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 }, /* AC97 TX c */ + { AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR }, /* AC97 RX c */ + { AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* UART3_TX */ + { AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */ + { AU1000_USB_UDC_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */ + { AU1000_USB_UDC_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */ + { AU1000_USB_UDC_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */ + { AU1000_USB_UDC_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */ + { AU1000_USB_UDC_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */ + { AU1000_USB_UDC_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */ + /* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */ + { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC}, /* I2S TX */ + { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */ +}; + +int au1000_dma_read_proc(char *buf, char **start, off_t fpos, + int length, int *eof, void *data) +{ + int i, len = 0; + struct dma_chan *chan; + + for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) { + chan = get_dma_chan(i); + if (chan != NULL) + len += sprintf(buf + len, "%2d: %s\n", + i, chan->dev_str); + } + + if (fpos >= len) { + *start = buf; + *eof = 1; + return 0; + } + *start = buf + fpos; + len -= fpos; + if (len > length) + return length; + *eof = 1; + return len; +} + +/* Device FIFO addresses and default DMA modes - 2nd bank */ +static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = { + { AU1100_SD0_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 }, /* coherent */ + { AU1100_SD0_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR }, /* coherent */ + { AU1100_SD1_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 }, /* coherent */ + { AU1100_SD1_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR } /* coherent */ +}; + +void dump_au1000_dma_channel(unsigned int dmanr) +{ + struct dma_chan *chan; + + if (dmanr >= NUM_AU1000_DMA_CHANNELS) + return; + chan = &au1000_dma_table[dmanr]; + + printk(KERN_INFO "Au1000 DMA%d Register Dump:\n", dmanr); + printk(KERN_INFO " mode = 0x%08x\n", + __raw_readl(chan->io + DMA_MODE_SET)); + printk(KERN_INFO " addr = 0x%08x\n", + __raw_readl(chan->io + DMA_PERIPHERAL_ADDR)); + printk(KERN_INFO " start0 = 0x%08x\n", + __raw_readl(chan->io + DMA_BUFFER0_START)); + printk(KERN_INFO " start1 = 0x%08x\n", + __raw_readl(chan->io + DMA_BUFFER1_START)); + printk(KERN_INFO " count0 = 0x%08x\n", + __raw_readl(chan->io + DMA_BUFFER0_COUNT)); + printk(KERN_INFO " count1 = 0x%08x\n", + __raw_readl(chan->io + DMA_BUFFER1_COUNT)); +} + +/* + * Finds a free channel, and binds the requested device to it. + * Returns the allocated channel number, or negative on error. + * Requests the DMA done IRQ if irqhandler != NULL. + */ +int request_au1000_dma(int dev_id, const char *dev_str, + irq_handler_t irqhandler, + unsigned long irqflags, + void *irq_dev_id) +{ + struct dma_chan *chan; + const struct dma_dev *dev; + int i, ret; + + if (alchemy_get_cputype() == ALCHEMY_CPU_AU1100) { + if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2)) + return -EINVAL; + } else { + if (dev_id < 0 || dev_id >= DMA_NUM_DEV) + return -EINVAL; + } + + for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) + if (au1000_dma_table[i].dev_id < 0) + break; + + if (i == NUM_AU1000_DMA_CHANNELS) + return -ENODEV; + + chan = &au1000_dma_table[i]; + + if (dev_id >= DMA_NUM_DEV) { + dev_id -= DMA_NUM_DEV; + dev = &dma_dev_table_bank2[dev_id]; + } else + dev = &dma_dev_table[dev_id]; + + if (irqhandler) { + chan->irq_dev = irq_dev_id; + ret = request_irq(chan->irq, irqhandler, irqflags, dev_str, + chan->irq_dev); + if (ret) { + chan->irq_dev = NULL; + return ret; + } + } else { + chan->irq_dev = NULL; + } + + /* fill it in */ + chan->io = (void __iomem *)(KSEG1ADDR(AU1000_DMA_PHYS_ADDR) + + i * DMA_CHANNEL_LEN); + chan->dev_id = dev_id; + chan->dev_str = dev_str; + chan->fifo_addr = dev->fifo_addr; + chan->mode = dev->dma_mode; + + /* initialize the channel before returning */ + init_dma(i); + + return i; +} +EXPORT_SYMBOL(request_au1000_dma); + +void free_au1000_dma(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) { + printk(KERN_ERR "Error trying to free DMA%d\n", dmanr); + return; + } + + disable_dma(dmanr); + if (chan->irq_dev) + free_irq(chan->irq, chan->irq_dev); + + chan->irq_dev = NULL; + chan->dev_id = -1; +} +EXPORT_SYMBOL(free_au1000_dma); + +static int __init au1000_dma_init(void) +{ + int base, i; + + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + base = AU1000_DMA_INT_BASE; + break; + case ALCHEMY_CPU_AU1500: + base = AU1500_DMA_INT_BASE; + break; + case ALCHEMY_CPU_AU1100: + base = AU1100_DMA_INT_BASE; + break; + default: + goto out; + } + + for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) + au1000_dma_table[i].irq = base + i; + + printk(KERN_INFO "Alchemy DMA initialized\n"); + +out: + return 0; +} +arch_initcall(au1000_dma_init); diff --git a/arch/mips/alchemy/common/gpiolib.c b/arch/mips/alchemy/common/gpiolib.c new file mode 100644 index 000000000..f9bc4f520 --- /dev/null +++ b/arch/mips/alchemy/common/gpiolib.c @@ -0,0 +1,175 @@ +/* + * Copyright (C) 2007-2009, OpenWrt.org, Florian Fainelli + * GPIOLIB support for Alchemy chips. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Notes : + * This file must ONLY be built when CONFIG_GPIOLIB=y and + * CONFIG_ALCHEMY_GPIO_INDIRECT=n, otherwise compilation will fail! + * au1000 SoC have only one GPIO block : GPIO1 + * Au1100, Au15x0, Au12x0 have a second one : GPIO2 + * Au1300 is totally different: 1 block with up to 128 GPIOs + */ + +#include +#include +#include +#include +#include +#include +#include + +static int gpio2_get(struct gpio_chip *chip, unsigned offset) +{ + return alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE); +} + +static void gpio2_set(struct gpio_chip *chip, unsigned offset, int value) +{ + alchemy_gpio2_set_value(offset + ALCHEMY_GPIO2_BASE, value); +} + +static int gpio2_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return alchemy_gpio2_direction_input(offset + ALCHEMY_GPIO2_BASE); +} + +static int gpio2_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + return alchemy_gpio2_direction_output(offset + ALCHEMY_GPIO2_BASE, + value); +} + +static int gpio2_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return alchemy_gpio2_to_irq(offset + ALCHEMY_GPIO2_BASE); +} + + +static int gpio1_get(struct gpio_chip *chip, unsigned offset) +{ + return alchemy_gpio1_get_value(offset + ALCHEMY_GPIO1_BASE); +} + +static void gpio1_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + alchemy_gpio1_set_value(offset + ALCHEMY_GPIO1_BASE, value); +} + +static int gpio1_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return alchemy_gpio1_direction_input(offset + ALCHEMY_GPIO1_BASE); +} + +static int gpio1_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + return alchemy_gpio1_direction_output(offset + ALCHEMY_GPIO1_BASE, + value); +} + +static int gpio1_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return alchemy_gpio1_to_irq(offset + ALCHEMY_GPIO1_BASE); +} + +struct gpio_chip alchemy_gpio_chip[] = { + [0] = { + .label = "alchemy-gpio1", + .direction_input = gpio1_direction_input, + .direction_output = gpio1_direction_output, + .get = gpio1_get, + .set = gpio1_set, + .to_irq = gpio1_to_irq, + .base = ALCHEMY_GPIO1_BASE, + .ngpio = ALCHEMY_GPIO1_NUM, + }, + [1] = { + .label = "alchemy-gpio2", + .direction_input = gpio2_direction_input, + .direction_output = gpio2_direction_output, + .get = gpio2_get, + .set = gpio2_set, + .to_irq = gpio2_to_irq, + .base = ALCHEMY_GPIO2_BASE, + .ngpio = ALCHEMY_GPIO2_NUM, + }, +}; + +static int alchemy_gpic_get(struct gpio_chip *chip, unsigned int off) +{ + return au1300_gpio_get_value(off + AU1300_GPIO_BASE); +} + +static void alchemy_gpic_set(struct gpio_chip *chip, unsigned int off, int v) +{ + au1300_gpio_set_value(off + AU1300_GPIO_BASE, v); +} + +static int alchemy_gpic_dir_input(struct gpio_chip *chip, unsigned int off) +{ + return au1300_gpio_direction_input(off + AU1300_GPIO_BASE); +} + +static int alchemy_gpic_dir_output(struct gpio_chip *chip, unsigned int off, + int v) +{ + return au1300_gpio_direction_output(off + AU1300_GPIO_BASE, v); +} + +static int alchemy_gpic_gpio_to_irq(struct gpio_chip *chip, unsigned int off) +{ + return au1300_gpio_to_irq(off + AU1300_GPIO_BASE); +} + +static struct gpio_chip au1300_gpiochip = { + .label = "alchemy-gpic", + .direction_input = alchemy_gpic_dir_input, + .direction_output = alchemy_gpic_dir_output, + .get = alchemy_gpic_get, + .set = alchemy_gpic_set, + .to_irq = alchemy_gpic_gpio_to_irq, + .base = AU1300_GPIO_BASE, + .ngpio = AU1300_GPIO_NUM, +}; + +static int __init alchemy_gpiochip_init(void) +{ + int ret = 0; + + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + ret = gpiochip_add(&alchemy_gpio_chip[0]); + break; + case ALCHEMY_CPU_AU1500...ALCHEMY_CPU_AU1200: + ret = gpiochip_add(&alchemy_gpio_chip[0]); + ret |= gpiochip_add(&alchemy_gpio_chip[1]); + break; + case ALCHEMY_CPU_AU1300: + ret = gpiochip_add(&au1300_gpiochip); + break; + } + return ret; +} +arch_initcall(alchemy_gpiochip_init); diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c new file mode 100644 index 000000000..6cb60abfd --- /dev/null +++ b/arch/mips/alchemy/common/irq.c @@ -0,0 +1,996 @@ +/* + * Copyright 2001, 2007-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +/* Interrupt Controller register offsets */ +#define IC_CFG0RD 0x40 +#define IC_CFG0SET 0x40 +#define IC_CFG0CLR 0x44 +#define IC_CFG1RD 0x48 +#define IC_CFG1SET 0x48 +#define IC_CFG1CLR 0x4C +#define IC_CFG2RD 0x50 +#define IC_CFG2SET 0x50 +#define IC_CFG2CLR 0x54 +#define IC_REQ0INT 0x54 +#define IC_SRCRD 0x58 +#define IC_SRCSET 0x58 +#define IC_SRCCLR 0x5C +#define IC_REQ1INT 0x5C +#define IC_ASSIGNRD 0x60 +#define IC_ASSIGNSET 0x60 +#define IC_ASSIGNCLR 0x64 +#define IC_WAKERD 0x68 +#define IC_WAKESET 0x68 +#define IC_WAKECLR 0x6C +#define IC_MASKRD 0x70 +#define IC_MASKSET 0x70 +#define IC_MASKCLR 0x74 +#define IC_RISINGRD 0x78 +#define IC_RISINGCLR 0x78 +#define IC_FALLINGRD 0x7C +#define IC_FALLINGCLR 0x7C +#define IC_TESTBIT 0x80 + +/* per-processor fixed function irqs */ +struct alchemy_irqmap { + int irq; /* linux IRQ number */ + int type; /* IRQ_TYPE_ */ + int prio; /* irq priority, 0 highest, 3 lowest */ + int internal; /* GPIC: internal source (no ext. pin)? */ +}; + +static int au1x_ic_settype(struct irq_data *d, unsigned int type); +static int au1300_gpic_settype(struct irq_data *d, unsigned int type); + + +/* NOTE on interrupt priorities: The original writers of this code said: + * + * Because of the tight timing of SETUP token to reply transactions, + * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT) + * needs the highest priority. + */ +struct alchemy_irqmap au1000_irqmap[] __initdata = { + { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { -1, }, +}; + +struct alchemy_irqmap au1500_irqmap[] __initdata = { + { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { -1, }, +}; + +struct alchemy_irqmap au1100_irqmap[] __initdata = { + { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { -1, }, +}; + +struct alchemy_irqmap au1550_irqmap[] __initdata = { + { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { -1, }, +}; + +struct alchemy_irqmap au1200_irqmap[] __initdata = { + { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { -1, }, +}; + +static struct alchemy_irqmap au1300_irqmap[] __initdata = { + /* multifunction: gpio pin or device */ + { AU1300_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_SD1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_SD2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_NAND_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + /* au1300 internal */ + { AU1300_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_MMU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_MPU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_GPU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_UDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 1, }, + { AU1300_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_SD0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_USB_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_BSA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_MPE_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_ITE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_AES_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_CIM_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { -1, }, /* terminator */ +}; + +/******************************************************************************/ + +static void au1x_ic0_unmask(struct irq_data *d) +{ + unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKSET); + __raw_writel(1 << bit, base + IC_WAKESET); + wmb(); +} + +static void au1x_ic1_unmask(struct irq_data *d) +{ + unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKSET); + __raw_writel(1 << bit, base + IC_WAKESET); + wmb(); +} + +static void au1x_ic0_mask(struct irq_data *d) +{ + unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_WAKECLR); + wmb(); +} + +static void au1x_ic1_mask(struct irq_data *d) +{ + unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_WAKECLR); + wmb(); +} + +static void au1x_ic0_ack(struct irq_data *d) +{ + unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); + + /* + * This may assume that we don't get interrupts from + * both edges at once, or if we do, that we don't care. + */ + __raw_writel(1 << bit, base + IC_FALLINGCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + wmb(); +} + +static void au1x_ic1_ack(struct irq_data *d) +{ + unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + + /* + * This may assume that we don't get interrupts from + * both edges at once, or if we do, that we don't care. + */ + __raw_writel(1 << bit, base + IC_FALLINGCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + wmb(); +} + +static void au1x_ic0_maskack(struct irq_data *d) +{ + unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_WAKECLR); + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + wmb(); +} + +static void au1x_ic1_maskack(struct irq_data *d) +{ + unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_WAKECLR); + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + wmb(); +} + +static int au1x_ic1_setwake(struct irq_data *d, unsigned int on) +{ + int bit = d->irq - AU1000_INTC1_INT_BASE; + unsigned long wakemsk, flags; + + /* only GPIO 0-7 can act as wakeup source. Fortunately these + * are wired up identically on all supported variants. + */ + if ((bit < 0) || (bit > 7)) + return -EINVAL; + + local_irq_save(flags); + wakemsk = alchemy_rdsys(AU1000_SYS_WAKEMSK); + if (on) + wakemsk |= 1 << bit; + else + wakemsk &= ~(1 << bit); + alchemy_wrsys(wakemsk, AU1000_SYS_WAKEMSK); + local_irq_restore(flags); + + return 0; +} + +/* + * irq_chips for both ICs; this way the mask handlers can be + * as short as possible. + */ +static struct irq_chip au1x_ic0_chip = { + .name = "Alchemy-IC0", + .irq_ack = au1x_ic0_ack, + .irq_mask = au1x_ic0_mask, + .irq_mask_ack = au1x_ic0_maskack, + .irq_unmask = au1x_ic0_unmask, + .irq_set_type = au1x_ic_settype, +}; + +static struct irq_chip au1x_ic1_chip = { + .name = "Alchemy-IC1", + .irq_ack = au1x_ic1_ack, + .irq_mask = au1x_ic1_mask, + .irq_mask_ack = au1x_ic1_maskack, + .irq_unmask = au1x_ic1_unmask, + .irq_set_type = au1x_ic_settype, + .irq_set_wake = au1x_ic1_setwake, +}; + +static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type) +{ + struct irq_chip *chip; + unsigned int bit, irq = d->irq; + irq_flow_handler_t handler = NULL; + unsigned char *name = NULL; + void __iomem *base; + int ret; + + if (irq >= AU1000_INTC1_INT_BASE) { + bit = irq - AU1000_INTC1_INT_BASE; + chip = &au1x_ic1_chip; + base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + } else { + bit = irq - AU1000_INTC0_INT_BASE; + chip = &au1x_ic0_chip; + base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); + } + + if (bit > 31) + return -EINVAL; + + ret = 0; + + switch (flow_type) { /* cfgregs 2:1:0 */ + case IRQ_TYPE_EDGE_RISING: /* 0:0:1 */ + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1CLR); + __raw_writel(1 << bit, base + IC_CFG0SET); + handler = handle_edge_irq; + name = "riseedge"; + break; + case IRQ_TYPE_EDGE_FALLING: /* 0:1:0 */ + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1SET); + __raw_writel(1 << bit, base + IC_CFG0CLR); + handler = handle_edge_irq; + name = "falledge"; + break; + case IRQ_TYPE_EDGE_BOTH: /* 0:1:1 */ + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1SET); + __raw_writel(1 << bit, base + IC_CFG0SET); + handler = handle_edge_irq; + name = "bothedge"; + break; + case IRQ_TYPE_LEVEL_HIGH: /* 1:0:1 */ + __raw_writel(1 << bit, base + IC_CFG2SET); + __raw_writel(1 << bit, base + IC_CFG1CLR); + __raw_writel(1 << bit, base + IC_CFG0SET); + handler = handle_level_irq; + name = "hilevel"; + break; + case IRQ_TYPE_LEVEL_LOW: /* 1:1:0 */ + __raw_writel(1 << bit, base + IC_CFG2SET); + __raw_writel(1 << bit, base + IC_CFG1SET); + __raw_writel(1 << bit, base + IC_CFG0CLR); + handler = handle_level_irq; + name = "lowlevel"; + break; + case IRQ_TYPE_NONE: /* 0:0:0 */ + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1CLR); + __raw_writel(1 << bit, base + IC_CFG0CLR); + break; + default: + ret = -EINVAL; + } + __irq_set_chip_handler_name_locked(d->irq, chip, handler, name); + + wmb(); + + return ret; +} + +/******************************************************************************/ + +/* + * au1300_gpic_chgcfg - change PIN configuration. + * @gpio: pin to change (0-based GPIO number from datasheet). + * @clr: clear all bits set in 'clr'. + * @set: set these bits. + * + * modifies a pins' configuration register, bits set in @clr will + * be cleared in the register, bits in @set will be set. + */ +static inline void au1300_gpic_chgcfg(unsigned int gpio, + unsigned long clr, + unsigned long set) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long l; + + r += gpio * 4; /* offset into pin config array */ + l = __raw_readl(r + AU1300_GPIC_PINCFG); + l &= ~clr; + l |= set; + __raw_writel(l, r + AU1300_GPIC_PINCFG); + wmb(); +} + +/* + * au1300_pinfunc_to_gpio - assign a pin as GPIO input (GPIO ctrl). + * @pin: pin (0-based GPIO number from datasheet). + * + * Assigns a GPIO pin to the GPIO controller, so its level can either + * be read or set through the generic GPIO functions. + * If you need a GPOUT, use au1300_gpio_set_value(pin, 0/1). + * REVISIT: is this function really necessary? + */ +void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio) +{ + au1300_gpio_direction_input(gpio + AU1300_GPIO_BASE); +} +EXPORT_SYMBOL_GPL(au1300_pinfunc_to_gpio); + +/* + * au1300_pinfunc_to_dev - assign a pin to the device function. + * @pin: pin (0-based GPIO number from datasheet). + * + * Assigns a GPIO pin to its associated device function; the pin will be + * driven by the device and not through GPIO functions. + */ +void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit; + + r += GPIC_GPIO_BANKOFF(gpio); + bit = GPIC_GPIO_TO_BIT(gpio); + __raw_writel(bit, r + AU1300_GPIC_DEVSEL); + wmb(); +} +EXPORT_SYMBOL_GPL(au1300_pinfunc_to_dev); + +/* + * au1300_set_irq_priority - set internal priority of IRQ. + * @irq: irq to set priority (linux irq number). + * @p: priority (0 = highest, 3 = lowest). + */ +void au1300_set_irq_priority(unsigned int irq, int p) +{ + irq -= ALCHEMY_GPIC_INT_BASE; + au1300_gpic_chgcfg(irq, GPIC_CFG_IL_MASK, GPIC_CFG_IL_SET(p)); +} +EXPORT_SYMBOL_GPL(au1300_set_irq_priority); + +/* + * au1300_set_dbdma_gpio - assign a gpio to one of the DBDMA triggers. + * @dchan: dbdma trigger select (0, 1). + * @gpio: pin to assign as trigger. + * + * DBDMA controller has 2 external trigger sources; this function + * assigns a GPIO to the selected trigger. + */ +void au1300_set_dbdma_gpio(int dchan, unsigned int gpio) +{ + unsigned long r; + + if ((dchan >= 0) && (dchan <= 1)) { + r = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL); + r &= ~(0xff << (8 * dchan)); + r |= (gpio & 0x7f) << (8 * dchan); + __raw_writel(r, AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL); + wmb(); + } +} + +static inline void gpic_pin_set_idlewake(unsigned int gpio, int allow) +{ + au1300_gpic_chgcfg(gpio, GPIC_CFG_IDLEWAKE, + allow ? GPIC_CFG_IDLEWAKE : 0); +} + +static void au1300_gpic_mask(struct irq_data *d) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit, irq = d->irq; + + irq -= ALCHEMY_GPIC_INT_BASE; + r += GPIC_GPIO_BANKOFF(irq); + bit = GPIC_GPIO_TO_BIT(irq); + __raw_writel(bit, r + AU1300_GPIC_IDIS); + wmb(); + + gpic_pin_set_idlewake(irq, 0); +} + +static void au1300_gpic_unmask(struct irq_data *d) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit, irq = d->irq; + + irq -= ALCHEMY_GPIC_INT_BASE; + + gpic_pin_set_idlewake(irq, 1); + + r += GPIC_GPIO_BANKOFF(irq); + bit = GPIC_GPIO_TO_BIT(irq); + __raw_writel(bit, r + AU1300_GPIC_IEN); + wmb(); +} + +static void au1300_gpic_maskack(struct irq_data *d) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit, irq = d->irq; + + irq -= ALCHEMY_GPIC_INT_BASE; + r += GPIC_GPIO_BANKOFF(irq); + bit = GPIC_GPIO_TO_BIT(irq); + __raw_writel(bit, r + AU1300_GPIC_IPEND); /* ack */ + __raw_writel(bit, r + AU1300_GPIC_IDIS); /* mask */ + wmb(); + + gpic_pin_set_idlewake(irq, 0); +} + +static void au1300_gpic_ack(struct irq_data *d) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit, irq = d->irq; + + irq -= ALCHEMY_GPIC_INT_BASE; + r += GPIC_GPIO_BANKOFF(irq); + bit = GPIC_GPIO_TO_BIT(irq); + __raw_writel(bit, r + AU1300_GPIC_IPEND); /* ack */ + wmb(); +} + +static struct irq_chip au1300_gpic = { + .name = "GPIOINT", + .irq_ack = au1300_gpic_ack, + .irq_mask = au1300_gpic_mask, + .irq_mask_ack = au1300_gpic_maskack, + .irq_unmask = au1300_gpic_unmask, + .irq_set_type = au1300_gpic_settype, +}; + +static int au1300_gpic_settype(struct irq_data *d, unsigned int type) +{ + unsigned long s; + unsigned char *name = NULL; + irq_flow_handler_t hdl = NULL; + + switch (type) { + case IRQ_TYPE_LEVEL_HIGH: + s = GPIC_CFG_IC_LEVEL_HIGH; + name = "high"; + hdl = handle_level_irq; + break; + case IRQ_TYPE_LEVEL_LOW: + s = GPIC_CFG_IC_LEVEL_LOW; + name = "low"; + hdl = handle_level_irq; + break; + case IRQ_TYPE_EDGE_RISING: + s = GPIC_CFG_IC_EDGE_RISE; + name = "posedge"; + hdl = handle_edge_irq; + break; + case IRQ_TYPE_EDGE_FALLING: + s = GPIC_CFG_IC_EDGE_FALL; + name = "negedge"; + hdl = handle_edge_irq; + break; + case IRQ_TYPE_EDGE_BOTH: + s = GPIC_CFG_IC_EDGE_BOTH; + name = "bothedge"; + hdl = handle_edge_irq; + break; + case IRQ_TYPE_NONE: + s = GPIC_CFG_IC_OFF; + name = "disabled"; + hdl = handle_level_irq; + break; + default: + return -EINVAL; + } + + __irq_set_chip_handler_name_locked(d->irq, &au1300_gpic, hdl, name); + + au1300_gpic_chgcfg(d->irq - ALCHEMY_GPIC_INT_BASE, GPIC_CFG_IC_MASK, s); + + return 0; +} + +/******************************************************************************/ + +static inline void ic_init(void __iomem *base) +{ + /* initialize interrupt controller to a safe state */ + __raw_writel(0xffffffff, base + IC_CFG0CLR); + __raw_writel(0xffffffff, base + IC_CFG1CLR); + __raw_writel(0xffffffff, base + IC_CFG2CLR); + __raw_writel(0xffffffff, base + IC_MASKCLR); + __raw_writel(0xffffffff, base + IC_ASSIGNCLR); + __raw_writel(0xffffffff, base + IC_WAKECLR); + __raw_writel(0xffffffff, base + IC_SRCSET); + __raw_writel(0xffffffff, base + IC_FALLINGCLR); + __raw_writel(0xffffffff, base + IC_RISINGCLR); + __raw_writel(0x00000000, base + IC_TESTBIT); + wmb(); +} + +static unsigned long alchemy_gpic_pmdata[ALCHEMY_GPIC_INT_NUM + 6]; + +static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d) +{ + d[0] = __raw_readl(base + IC_CFG0RD); + d[1] = __raw_readl(base + IC_CFG1RD); + d[2] = __raw_readl(base + IC_CFG2RD); + d[3] = __raw_readl(base + IC_SRCRD); + d[4] = __raw_readl(base + IC_ASSIGNRD); + d[5] = __raw_readl(base + IC_WAKERD); + d[6] = __raw_readl(base + IC_MASKRD); + ic_init(base); /* shut it up too while at it */ +} + +static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d) +{ + ic_init(base); + + __raw_writel(d[0], base + IC_CFG0SET); + __raw_writel(d[1], base + IC_CFG1SET); + __raw_writel(d[2], base + IC_CFG2SET); + __raw_writel(d[3], base + IC_SRCSET); + __raw_writel(d[4], base + IC_ASSIGNSET); + __raw_writel(d[5], base + IC_WAKESET); + wmb(); + + __raw_writel(d[6], base + IC_MASKSET); + wmb(); +} + +static int alchemy_ic_suspend(void) +{ + alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), + alchemy_gpic_pmdata); + alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), + &alchemy_gpic_pmdata[7]); + return 0; +} + +static void alchemy_ic_resume(void) +{ + alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), + &alchemy_gpic_pmdata[7]); + alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), + alchemy_gpic_pmdata); +} + +static int alchemy_gpic_suspend(void) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); + int i; + + /* save 4 interrupt mask status registers */ + alchemy_gpic_pmdata[0] = __raw_readl(base + AU1300_GPIC_IEN + 0x0); + alchemy_gpic_pmdata[1] = __raw_readl(base + AU1300_GPIC_IEN + 0x4); + alchemy_gpic_pmdata[2] = __raw_readl(base + AU1300_GPIC_IEN + 0x8); + alchemy_gpic_pmdata[3] = __raw_readl(base + AU1300_GPIC_IEN + 0xc); + + /* save misc register(s) */ + alchemy_gpic_pmdata[4] = __raw_readl(base + AU1300_GPIC_DMASEL); + + /* molto silenzioso */ + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc); + wmb(); + + /* save pin/int-type configuration */ + base += AU1300_GPIC_PINCFG; + for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++) + alchemy_gpic_pmdata[i + 5] = __raw_readl(base + (i << 2)); + + wmb(); + + return 0; +} + +static void alchemy_gpic_resume(void) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); + int i; + + /* disable all first */ + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc); + wmb(); + + /* restore pin/int-type configurations */ + base += AU1300_GPIC_PINCFG; + for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++) + __raw_writel(alchemy_gpic_pmdata[i + 5], base + (i << 2)); + wmb(); + + /* restore misc register(s) */ + base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); + __raw_writel(alchemy_gpic_pmdata[4], base + AU1300_GPIC_DMASEL); + wmb(); + + /* finally restore masks */ + __raw_writel(alchemy_gpic_pmdata[0], base + AU1300_GPIC_IEN + 0x0); + __raw_writel(alchemy_gpic_pmdata[1], base + AU1300_GPIC_IEN + 0x4); + __raw_writel(alchemy_gpic_pmdata[2], base + AU1300_GPIC_IEN + 0x8); + __raw_writel(alchemy_gpic_pmdata[3], base + AU1300_GPIC_IEN + 0xc); + wmb(); +} + +static struct syscore_ops alchemy_ic_pmops = { + .suspend = alchemy_ic_suspend, + .resume = alchemy_ic_resume, +}; + +static struct syscore_ops alchemy_gpic_pmops = { + .suspend = alchemy_gpic_suspend, + .resume = alchemy_gpic_resume, +}; + +/******************************************************************************/ + +/* create chained handlers for the 4 IC requests to the MIPS IRQ ctrl */ +#define DISP(name, base, addr) \ +static void au1000_##name##_dispatch(unsigned int irq, struct irq_desc *d) \ +{ \ + unsigned long r = __raw_readl((void __iomem *)KSEG1ADDR(addr)); \ + if (likely(r)) \ + generic_handle_irq(base + __ffs(r)); \ + else \ + spurious_interrupt(); \ +} + +DISP(ic0r0, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ0INT) +DISP(ic0r1, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ1INT) +DISP(ic1r0, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ0INT) +DISP(ic1r1, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ1INT) + +static void alchemy_gpic_dispatch(unsigned int irq, struct irq_desc *d) +{ + int i = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_PRIENC); + generic_handle_irq(ALCHEMY_GPIC_INT_BASE + i); +} + +/******************************************************************************/ + +static void __init au1000_init_irq(struct alchemy_irqmap *map) +{ + unsigned int bit, irq_nr; + void __iomem *base; + + ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR)); + ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR)); + register_syscore_ops(&alchemy_ic_pmops); + mips_cpu_irq_init(); + + /* register all 64 possible IC0+IC1 irq sources as type "none". + * Use set_irq_type() to set edge/level behaviour at runtime. + */ + for (irq_nr = AU1000_INTC0_INT_BASE; + (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++) + au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); + + for (irq_nr = AU1000_INTC1_INT_BASE; + (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++) + au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); + + /* + * Initialize IC0, which is fixed per processor. + */ + while (map->irq != -1) { + irq_nr = map->irq; + + if (irq_nr >= AU1000_INTC1_INT_BASE) { + bit = irq_nr - AU1000_INTC1_INT_BASE; + base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + } else { + bit = irq_nr - AU1000_INTC0_INT_BASE; + base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); + } + if (map->prio == 0) + __raw_writel(1 << bit, base + IC_ASSIGNSET); + + au1x_ic_settype(irq_get_irq_data(irq_nr), map->type); + ++map; + } + + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, au1000_ic0r0_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, au1000_ic0r1_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, au1000_ic1r0_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, au1000_ic1r1_dispatch); +} + +static void __init alchemy_gpic_init_irq(const struct alchemy_irqmap *dints) +{ + int i; + void __iomem *bank_base; + + register_syscore_ops(&alchemy_gpic_pmops); + mips_cpu_irq_init(); + + /* disable & ack all possible interrupt sources */ + for (i = 0; i < 4; i++) { + bank_base = AU1300_GPIC_ADDR + (i * 4); + __raw_writel(~0UL, bank_base + AU1300_GPIC_IDIS); + wmb(); + __raw_writel(~0UL, bank_base + AU1300_GPIC_IPEND); + wmb(); + } + + /* register an irq_chip for them, with 2nd highest priority */ + for (i = ALCHEMY_GPIC_INT_BASE; i <= ALCHEMY_GPIC_INT_LAST; i++) { + au1300_set_irq_priority(i, 1); + au1300_gpic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE); + } + + /* setup known on-chip sources */ + while ((i = dints->irq) != -1) { + au1300_gpic_settype(irq_get_irq_data(i), dints->type); + au1300_set_irq_priority(i, dints->prio); + + if (dints->internal) + au1300_pinfunc_to_dev(i - ALCHEMY_GPIC_INT_BASE); + + dints++; + } + + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, alchemy_gpic_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, alchemy_gpic_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, alchemy_gpic_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, alchemy_gpic_dispatch); +} + +/******************************************************************************/ + +void __init arch_init_irq(void) +{ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + au1000_init_irq(au1000_irqmap); + break; + case ALCHEMY_CPU_AU1500: + au1000_init_irq(au1500_irqmap); + break; + case ALCHEMY_CPU_AU1100: + au1000_init_irq(au1100_irqmap); + break; + case ALCHEMY_CPU_AU1550: + au1000_init_irq(au1550_irqmap); + break; + case ALCHEMY_CPU_AU1200: + au1000_init_irq(au1200_irqmap); + break; + case ALCHEMY_CPU_AU1300: + alchemy_gpic_init_irq(au1300_irqmap); + break; + default: + pr_err("unknown Alchemy IRQ core\n"); + break; + } +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long r = (read_c0_status() & read_c0_cause()) >> 8; + do_IRQ(MIPS_CPU_IRQ_BASE + __ffs(r & 0xff)); +} diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c new file mode 100644 index 000000000..d77a64f4c --- /dev/null +++ b/arch/mips/alchemy/common/platform.c @@ -0,0 +1,452 @@ +/* + * Platform device support for Au1x00 SoCs. + * + * Copyright 2004, Matt Porter + * + * (C) Copyright Embedded Alley Solutions, Inc 2005 + * Author: Pantelis Antoniou + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +static void alchemy_8250_pm(struct uart_port *port, unsigned int state, + unsigned int old_state) +{ +#ifdef CONFIG_SERIAL_8250 + switch (state) { + case 0: + alchemy_uart_enable(CPHYSADDR(port->membase)); + serial8250_do_pm(port, state, old_state); + break; + case 3: /* power off */ + serial8250_do_pm(port, state, old_state); + alchemy_uart_disable(CPHYSADDR(port->membase)); + break; + default: + serial8250_do_pm(port, state, old_state); + break; + } +#endif +} + +#define PORT(_base, _irq) \ + { \ + .mapbase = _base, \ + .irq = _irq, \ + .regshift = 2, \ + .iotype = UPIO_AU, \ + .flags = UPF_SKIP_TEST | UPF_IOREMAP | \ + UPF_FIXED_TYPE, \ + .type = PORT_16550A, \ + .pm = alchemy_8250_pm, \ + } + +static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = { + [ALCHEMY_CPU_AU1000] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT), + PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT), + }, + [ALCHEMY_CPU_AU1500] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT), + }, + [ALCHEMY_CPU_AU1100] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT), + }, + [ALCHEMY_CPU_AU1550] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT), + }, + [ALCHEMY_CPU_AU1200] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT), + }, + [ALCHEMY_CPU_AU1300] = { + PORT(AU1300_UART0_PHYS_ADDR, AU1300_UART0_INT), + PORT(AU1300_UART1_PHYS_ADDR, AU1300_UART1_INT), + PORT(AU1300_UART2_PHYS_ADDR, AU1300_UART2_INT), + PORT(AU1300_UART3_PHYS_ADDR, AU1300_UART3_INT), + }, +}; + +static struct platform_device au1xx0_uart_device = { + .name = "serial8250", + .id = PLAT8250_DEV_AU1X00, +}; + +static void __init alchemy_setup_uarts(int ctype) +{ + long uartclk; + int s = sizeof(struct plat_serial8250_port); + int c = alchemy_get_uarts(ctype); + struct plat_serial8250_port *ports; + struct clk *clk = clk_get(NULL, ALCHEMY_PERIPH_CLK); + + if (IS_ERR(clk)) + return; + if (clk_prepare_enable(clk)) { + clk_put(clk); + return; + } + uartclk = clk_get_rate(clk); + clk_put(clk); + + ports = kzalloc(s * (c + 1), GFP_KERNEL); + if (!ports) { + printk(KERN_INFO "Alchemy: no memory for UART data\n"); + return; + } + memcpy(ports, au1x00_uart_data[ctype], s * c); + au1xx0_uart_device.dev.platform_data = ports; + + /* Fill up uartclk. */ + for (s = 0; s < c; s++) + ports[s].uartclk = uartclk; + if (platform_device_register(&au1xx0_uart_device)) + printk(KERN_INFO "Alchemy: failed to register UARTs\n"); +} + + +/* The dmamask must be set for OHCI/EHCI to work */ +static u64 alchemy_ohci_dmamask = DMA_BIT_MASK(32); +static u64 __maybe_unused alchemy_ehci_dmamask = DMA_BIT_MASK(32); + +/* Power on callback for the ehci platform driver */ +static int alchemy_ehci_power_on(struct platform_device *pdev) +{ + return alchemy_usb_control(ALCHEMY_USB_EHCI0, 1); +} + +/* Power off/suspend callback for the ehci platform driver */ +static void alchemy_ehci_power_off(struct platform_device *pdev) +{ + alchemy_usb_control(ALCHEMY_USB_EHCI0, 0); +} + +static struct usb_ehci_pdata alchemy_ehci_pdata = { + .no_io_watchdog = 1, + .power_on = alchemy_ehci_power_on, + .power_off = alchemy_ehci_power_off, + .power_suspend = alchemy_ehci_power_off, +}; + +/* Power on callback for the ohci platform driver */ +static int alchemy_ohci_power_on(struct platform_device *pdev) +{ + int unit; + + unit = (pdev->id == 1) ? + ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; + + return alchemy_usb_control(unit, 1); +} + +/* Power off/suspend callback for the ohci platform driver */ +static void alchemy_ohci_power_off(struct platform_device *pdev) +{ + int unit; + + unit = (pdev->id == 1) ? + ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; + + alchemy_usb_control(unit, 0); +} + +static struct usb_ohci_pdata alchemy_ohci_pdata = { + .power_on = alchemy_ohci_power_on, + .power_off = alchemy_ohci_power_off, + .power_suspend = alchemy_ohci_power_off, +}; + +static unsigned long alchemy_ohci_data[][2] __initdata = { + [ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT }, + [ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT }, + [ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT }, + [ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT }, + [ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT }, + [ALCHEMY_CPU_AU1300] = { AU1300_USB_OHCI0_PHYS_ADDR, AU1300_USB_INT }, +}; + +static unsigned long alchemy_ehci_data[][2] __initdata = { + [ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT }, + [ALCHEMY_CPU_AU1300] = { AU1300_USB_EHCI_PHYS_ADDR, AU1300_USB_INT }, +}; + +static int __init _new_usbres(struct resource **r, struct platform_device **d) +{ + *r = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!*r) + return -ENOMEM; + *d = kzalloc(sizeof(struct platform_device), GFP_KERNEL); + if (!*d) { + kfree(*r); + return -ENOMEM; + } + + (*d)->dev.coherent_dma_mask = DMA_BIT_MASK(32); + (*d)->num_resources = 2; + (*d)->resource = *r; + + return 0; +} + +static void __init alchemy_setup_usb(int ctype) +{ + struct resource *res; + struct platform_device *pdev; + + /* setup OHCI0. Every variant has one */ + if (_new_usbres(&res, &pdev)) + return; + + res[0].start = alchemy_ohci_data[ctype][0]; + res[0].end = res[0].start + 0x100 - 1; + res[0].flags = IORESOURCE_MEM; + res[1].start = alchemy_ohci_data[ctype][1]; + res[1].end = res[1].start; + res[1].flags = IORESOURCE_IRQ; + pdev->name = "ohci-platform"; + pdev->id = 0; + pdev->dev.dma_mask = &alchemy_ohci_dmamask; + pdev->dev.platform_data = &alchemy_ohci_pdata; + + if (platform_device_register(pdev)) + printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n"); + + + /* setup EHCI0: Au1200/Au1300 */ + if ((ctype == ALCHEMY_CPU_AU1200) || (ctype == ALCHEMY_CPU_AU1300)) { + if (_new_usbres(&res, &pdev)) + return; + + res[0].start = alchemy_ehci_data[ctype][0]; + res[0].end = res[0].start + 0x100 - 1; + res[0].flags = IORESOURCE_MEM; + res[1].start = alchemy_ehci_data[ctype][1]; + res[1].end = res[1].start; + res[1].flags = IORESOURCE_IRQ; + pdev->name = "ehci-platform"; + pdev->id = 0; + pdev->dev.dma_mask = &alchemy_ehci_dmamask; + pdev->dev.platform_data = &alchemy_ehci_pdata; + + if (platform_device_register(pdev)) + printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n"); + } + + /* Au1300: OHCI1 */ + if (ctype == ALCHEMY_CPU_AU1300) { + if (_new_usbres(&res, &pdev)) + return; + + res[0].start = AU1300_USB_OHCI1_PHYS_ADDR; + res[0].end = res[0].start + 0x100 - 1; + res[0].flags = IORESOURCE_MEM; + res[1].start = AU1300_USB_INT; + res[1].end = res[1].start; + res[1].flags = IORESOURCE_IRQ; + pdev->name = "ohci-platform"; + pdev->id = 1; + pdev->dev.dma_mask = &alchemy_ohci_dmamask; + pdev->dev.platform_data = &alchemy_ohci_pdata; + + if (platform_device_register(pdev)) + printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n"); + } +} + +/* Macro to help defining the Ethernet MAC resources */ +#define MAC_RES_COUNT 4 /* MAC regs, MAC en, MAC INT, MACDMA regs */ +#define MAC_RES(_base, _enable, _irq, _macdma) \ + { \ + .start = _base, \ + .end = _base + 0xffff, \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = _enable, \ + .end = _enable + 0x3, \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = _irq, \ + .end = _irq, \ + .flags = IORESOURCE_IRQ \ + }, \ + { \ + .start = _macdma, \ + .end = _macdma + 0x1ff, \ + .flags = IORESOURCE_MEM, \ + } + +static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = { + [ALCHEMY_CPU_AU1000] = { + MAC_RES(AU1000_MAC0_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR, + AU1000_MAC0_DMA_INT, + AU1000_MACDMA0_PHYS_ADDR) + }, + [ALCHEMY_CPU_AU1500] = { + MAC_RES(AU1500_MAC0_PHYS_ADDR, + AU1500_MACEN_PHYS_ADDR, + AU1500_MAC0_DMA_INT, + AU1000_MACDMA0_PHYS_ADDR) + }, + [ALCHEMY_CPU_AU1100] = { + MAC_RES(AU1000_MAC0_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR, + AU1100_MAC0_DMA_INT, + AU1000_MACDMA0_PHYS_ADDR) + }, + [ALCHEMY_CPU_AU1550] = { + MAC_RES(AU1000_MAC0_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR, + AU1550_MAC0_DMA_INT, + AU1000_MACDMA0_PHYS_ADDR) + }, +}; + +static struct au1000_eth_platform_data au1xxx_eth0_platform_data = { + .phy1_search_mac0 = 1, +}; + +static struct platform_device au1xxx_eth0_device = { + .name = "au1000-eth", + .id = 0, + .num_resources = MAC_RES_COUNT, + .dev.platform_data = &au1xxx_eth0_platform_data, +}; + +static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = { + [ALCHEMY_CPU_AU1000] = { + MAC_RES(AU1000_MAC1_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR + 4, + AU1000_MAC1_DMA_INT, + AU1000_MACDMA1_PHYS_ADDR) + }, + [ALCHEMY_CPU_AU1500] = { + MAC_RES(AU1500_MAC1_PHYS_ADDR, + AU1500_MACEN_PHYS_ADDR + 4, + AU1500_MAC1_DMA_INT, + AU1000_MACDMA1_PHYS_ADDR) + }, + [ALCHEMY_CPU_AU1550] = { + MAC_RES(AU1000_MAC1_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR + 4, + AU1550_MAC1_DMA_INT, + AU1000_MACDMA1_PHYS_ADDR) + }, +}; + +static struct au1000_eth_platform_data au1xxx_eth1_platform_data = { + .phy1_search_mac0 = 1, +}; + +static struct platform_device au1xxx_eth1_device = { + .name = "au1000-eth", + .id = 1, + .num_resources = MAC_RES_COUNT, + .dev.platform_data = &au1xxx_eth1_platform_data, +}; + +void __init au1xxx_override_eth_cfg(unsigned int port, + struct au1000_eth_platform_data *eth_data) +{ + if (!eth_data || port > 1) + return; + + if (port == 0) + memcpy(&au1xxx_eth0_platform_data, eth_data, + sizeof(struct au1000_eth_platform_data)); + else + memcpy(&au1xxx_eth1_platform_data, eth_data, + sizeof(struct au1000_eth_platform_data)); +} + +static void __init alchemy_setup_macs(int ctype) +{ + int ret, i; + unsigned char ethaddr[6]; + struct resource *macres; + + /* Handle 1st MAC */ + if (alchemy_get_macs(ctype) < 1) + return; + + macres = kmemdup(au1xxx_eth0_resources[ctype], + sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL); + if (!macres) { + printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n"); + return; + } + au1xxx_eth0_device.resource = macres; + + i = prom_get_ethernet_addr(ethaddr); + if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac)) + memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6); + + ret = platform_device_register(&au1xxx_eth0_device); + if (ret) + printk(KERN_INFO "Alchemy: failed to register MAC0\n"); + + + /* Handle 2nd MAC */ + if (alchemy_get_macs(ctype) < 2) + return; + + macres = kmemdup(au1xxx_eth1_resources[ctype], + sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL); + if (!macres) { + printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n"); + return; + } + au1xxx_eth1_device.resource = macres; + + ethaddr[5] += 1; /* next addr for 2nd MAC */ + if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac)) + memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6); + + /* Register second MAC if enabled in pinfunc */ + if (!(alchemy_rdsys(AU1000_SYS_PINFUNC) & SYS_PF_NI2)) { + ret = platform_device_register(&au1xxx_eth1_device); + if (ret) + printk(KERN_INFO "Alchemy: failed to register MAC1\n"); + } +} + +static int __init au1xxx_platform_init(void) +{ + int ctype = alchemy_get_cputype(); + + alchemy_setup_uarts(ctype); + alchemy_setup_macs(ctype); + alchemy_setup_usb(ctype); + + return 0; +} + +arch_initcall(au1xxx_platform_init); diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c new file mode 100644 index 000000000..921ed30b4 --- /dev/null +++ b/arch/mips/alchemy/common/power.c @@ -0,0 +1,132 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xx0 Power Management routines. + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * Some of the routines are right out of init/main.c, whose + * copyrights apply here. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +#include +#include + +/* + * We need to save/restore a bunch of core registers that are + * either volatile or reset to some state across a processor sleep. + * If reading a register doesn't provide a proper result for a + * later restore, we have to provide a function for loading that + * register and save a copy. + * + * We only have to save/restore registers that aren't otherwise + * done as part of a driver pm_* function. + */ +static unsigned int sleep_sys_clocks[5]; +static unsigned int sleep_sys_pinfunc; +static unsigned int sleep_static_memctlr[4][3]; + + +static void save_core_regs(void) +{ + /* Clocks and PLLs. */ + sleep_sys_clocks[0] = alchemy_rdsys(AU1000_SYS_FREQCTRL0); + sleep_sys_clocks[1] = alchemy_rdsys(AU1000_SYS_FREQCTRL1); + sleep_sys_clocks[2] = alchemy_rdsys(AU1000_SYS_CLKSRC); + sleep_sys_clocks[3] = alchemy_rdsys(AU1000_SYS_CPUPLL); + sleep_sys_clocks[4] = alchemy_rdsys(AU1000_SYS_AUXPLL); + + /* pin mux config */ + sleep_sys_pinfunc = alchemy_rdsys(AU1000_SYS_PINFUNC); + + /* Save the static memory controller configuration. */ + sleep_static_memctlr[0][0] = alchemy_rdsmem(AU1000_MEM_STCFG0); + sleep_static_memctlr[0][1] = alchemy_rdsmem(AU1000_MEM_STTIME0); + sleep_static_memctlr[0][2] = alchemy_rdsmem(AU1000_MEM_STADDR0); + sleep_static_memctlr[1][0] = alchemy_rdsmem(AU1000_MEM_STCFG1); + sleep_static_memctlr[1][1] = alchemy_rdsmem(AU1000_MEM_STTIME1); + sleep_static_memctlr[1][2] = alchemy_rdsmem(AU1000_MEM_STADDR1); + sleep_static_memctlr[2][0] = alchemy_rdsmem(AU1000_MEM_STCFG2); + sleep_static_memctlr[2][1] = alchemy_rdsmem(AU1000_MEM_STTIME2); + sleep_static_memctlr[2][2] = alchemy_rdsmem(AU1000_MEM_STADDR2); + sleep_static_memctlr[3][0] = alchemy_rdsmem(AU1000_MEM_STCFG3); + sleep_static_memctlr[3][1] = alchemy_rdsmem(AU1000_MEM_STTIME3); + sleep_static_memctlr[3][2] = alchemy_rdsmem(AU1000_MEM_STADDR3); +} + +static void restore_core_regs(void) +{ + /* restore clock configuration. Writing CPUPLL last will + * stall a bit and stabilize other clocks (unless this is + * one of those Au1000 with a write-only PLL, where we dont + * have a valid value) + */ + alchemy_wrsys(sleep_sys_clocks[0], AU1000_SYS_FREQCTRL0); + alchemy_wrsys(sleep_sys_clocks[1], AU1000_SYS_FREQCTRL1); + alchemy_wrsys(sleep_sys_clocks[2], AU1000_SYS_CLKSRC); + alchemy_wrsys(sleep_sys_clocks[4], AU1000_SYS_AUXPLL); + if (!au1xxx_cpu_has_pll_wo()) + alchemy_wrsys(sleep_sys_clocks[3], AU1000_SYS_CPUPLL); + + alchemy_wrsys(sleep_sys_pinfunc, AU1000_SYS_PINFUNC); + + /* Restore the static memory controller configuration. */ + alchemy_wrsmem(sleep_static_memctlr[0][0], AU1000_MEM_STCFG0); + alchemy_wrsmem(sleep_static_memctlr[0][1], AU1000_MEM_STTIME0); + alchemy_wrsmem(sleep_static_memctlr[0][2], AU1000_MEM_STADDR0); + alchemy_wrsmem(sleep_static_memctlr[1][0], AU1000_MEM_STCFG1); + alchemy_wrsmem(sleep_static_memctlr[1][1], AU1000_MEM_STTIME1); + alchemy_wrsmem(sleep_static_memctlr[1][2], AU1000_MEM_STADDR1); + alchemy_wrsmem(sleep_static_memctlr[2][0], AU1000_MEM_STCFG2); + alchemy_wrsmem(sleep_static_memctlr[2][1], AU1000_MEM_STTIME2); + alchemy_wrsmem(sleep_static_memctlr[2][2], AU1000_MEM_STADDR2); + alchemy_wrsmem(sleep_static_memctlr[3][0], AU1000_MEM_STCFG3); + alchemy_wrsmem(sleep_static_memctlr[3][1], AU1000_MEM_STTIME3); + alchemy_wrsmem(sleep_static_memctlr[3][2], AU1000_MEM_STADDR3); +} + +void au_sleep(void) +{ + save_core_regs(); + + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1100: + alchemy_sleep_au1000(); + break; + case ALCHEMY_CPU_AU1550: + case ALCHEMY_CPU_AU1200: + alchemy_sleep_au1550(); + break; + case ALCHEMY_CPU_AU1300: + alchemy_sleep_au1300(); + break; + } + + restore_core_regs(); +} diff --git a/arch/mips/alchemy/common/prom.c b/arch/mips/alchemy/common/prom.c new file mode 100644 index 000000000..534021059 --- /dev/null +++ b/arch/mips/alchemy/common/prom.c @@ -0,0 +1,129 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * PROM library initialisation code, supports YAMON and U-Boot. + * + * Copyright 2000-2001, 2006, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This file was derived from Carsten Langgaard's + * arch/mips/mips-boards/xx files. + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +#include + +int prom_argc; +char **prom_argv; +char **prom_envp; + +void __init prom_init_cmdline(void) +{ + int i; + + for (i = 1; i < prom_argc; i++) { + strlcat(arcs_cmdline, prom_argv[i], COMMAND_LINE_SIZE); + if (i < (prom_argc - 1)) + strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE); + } +} + +char *prom_getenv(char *envname) +{ + /* + * Return a pointer to the given environment variable. + * YAMON uses "name", "value" pairs, while U-Boot uses "name=value". + */ + + char **env = prom_envp; + int i = strlen(envname); + int yamon = (*env && strchr(*env, '=') == NULL); + + while (*env) { + if (yamon) { + if (strcmp(envname, *env++) == 0) + return *env; + } else if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=') + return *env + i + 1; + env++; + } + + return NULL; +} + +static inline unsigned char str2hexnum(unsigned char c) +{ + if (c >= '0' && c <= '9') + return c - '0'; + if (c >= 'a' && c <= 'f') + return c - 'a' + 10; + if (c >= 'A' && c <= 'F') + return c - 'A' + 10; + + return 0; /* foo */ +} + +static inline void str2eaddr(unsigned char *ea, unsigned char *str) +{ + int i; + + for (i = 0; i < 6; i++) { + unsigned char num; + + if ((*str == '.') || (*str == ':')) + str++; + num = str2hexnum(*str++) << 4; + num |= str2hexnum(*str++); + ea[i] = num; + } +} + +int __init prom_get_ethernet_addr(char *ethernet_addr) +{ + char *ethaddr_str; + + /* Check the environment variables first */ + ethaddr_str = prom_getenv("ethaddr"); + if (!ethaddr_str) { + /* Check command line */ + ethaddr_str = strstr(arcs_cmdline, "ethaddr="); + if (!ethaddr_str) + return -1; + + ethaddr_str += strlen("ethaddr="); + } + + str2eaddr(ethernet_addr, ethaddr_str); + + return 0; +} + +void __init prom_free_prom_memory(void) +{ +} diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c new file mode 100644 index 000000000..2902138b3 --- /dev/null +++ b/arch/mips/alchemy/common/setup.c @@ -0,0 +1,94 @@ +/* + * Copyright 2000, 2007-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. +#include + +#include +#include + +#include + +extern void __init board_setup(void); +extern void __init alchemy_set_lpj(void); + +void __init plat_mem_setup(void) +{ + alchemy_set_lpj(); + + if (au1xxx_cpu_needs_config_od()) + /* Various early Au1xx0 errata corrected by this */ + set_c0_config(1 << 19); /* Set Config[OD] */ + else + /* Clear to obtain best system bus performance */ + clear_c0_config(1 << 19); /* Clear Config[OD] */ + + hw_coherentio = 0; + coherentio = 1; + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1100: + coherentio = 0; + break; + case ALCHEMY_CPU_AU1200: + /* Au1200 AB USB does not support coherent memory */ + if (0 == (read_c0_prid() & PRID_REV_MASK)) + coherentio = 0; + break; + } + + board_setup(); /* board specific setup */ + + /* IO/MEM resources. */ + set_io_port_base(0); + ioport_resource.start = IOPORT_RESOURCE_START; + ioport_resource.end = IOPORT_RESOURCE_END; + iomem_resource.start = IOMEM_RESOURCE_START; + iomem_resource.end = IOMEM_RESOURCE_END; +} + +#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_PCI) +/* This routine should be valid for all Au1x based boards */ +phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size) +{ + unsigned long start = ALCHEMY_PCI_MEMWIN_START; + unsigned long end = ALCHEMY_PCI_MEMWIN_END; + + /* Don't fixup 36-bit addresses */ + if ((phys_addr >> 32) != 0) + return phys_addr; + + /* Check for PCI memory window */ + if (phys_addr >= start && (phys_addr + size - 1) <= end) + return (phys_addr_t)(AU1500_PCI_MEM_PHYS_ADDR + phys_addr); + + /* default nop */ + return phys_addr; +} +EXPORT_SYMBOL(__fixup_bigphys_addr); +#endif diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S new file mode 100644 index 000000000..c73d81270 --- /dev/null +++ b/arch/mips/alchemy/common/sleeper.S @@ -0,0 +1,270 @@ +/* + * Copyright 2002 Embedded Edge, LLC + * Author: dan@embeddededge.com + * + * Sleep helper for Au1xxx sleep mode. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include + + .extern __flush_cache_all + + .text + .set noreorder + .set noat + .align 5 + + +/* preparatory stuff */ +.macro SETUP_SLEEP + subu sp, PT_SIZE + sw $1, PT_R1(sp) + sw $2, PT_R2(sp) + sw $3, PT_R3(sp) + sw $4, PT_R4(sp) + sw $5, PT_R5(sp) + sw $6, PT_R6(sp) + sw $7, PT_R7(sp) + sw $16, PT_R16(sp) + sw $17, PT_R17(sp) + sw $18, PT_R18(sp) + sw $19, PT_R19(sp) + sw $20, PT_R20(sp) + sw $21, PT_R21(sp) + sw $22, PT_R22(sp) + sw $23, PT_R23(sp) + sw $26, PT_R26(sp) + sw $27, PT_R27(sp) + sw $28, PT_R28(sp) + sw $30, PT_R30(sp) + sw $31, PT_R31(sp) + mfc0 k0, CP0_STATUS + sw k0, 0x20(sp) + mfc0 k0, CP0_CONTEXT + sw k0, 0x1c(sp) + mfc0 k0, CP0_PAGEMASK + sw k0, 0x18(sp) + mfc0 k0, CP0_CONFIG + sw k0, 0x14(sp) + + /* flush caches to make sure context is in memory */ + la t1, __flush_cache_all + lw t0, 0(t1) + jalr t0 + nop + + /* Now set up the scratch registers so the boot rom will + * return to this point upon wakeup. + * sys_scratch0 : SP + * sys_scratch1 : RA + */ + lui t3, 0xb190 /* sys_xxx */ + sw sp, 0x0018(t3) + la k0, alchemy_sleep_wakeup /* resume path */ + sw k0, 0x001c(t3) +.endm + +.macro DO_SLEEP + /* put power supply and processor to sleep */ + sw zero, 0x0078(t3) /* sys_slppwr */ + sync + sw zero, 0x007c(t3) /* sys_sleep */ + sync + nop + nop + nop + nop + nop + nop + nop + nop +.endm + +/* sleep code for Au1000/Au1100/Au1500 memory controller type */ +LEAF(alchemy_sleep_au1000) + + SETUP_SLEEP + + /* cache following instructions, as memory gets put to sleep */ + la t0, 1f + .set arch=r4000 + cache 0x14, 0(t0) + cache 0x14, 32(t0) + cache 0x14, 64(t0) + cache 0x14, 96(t0) + .set mips0 + +1: lui a0, 0xb400 /* mem_xxx */ + sw zero, 0x001c(a0) /* Precharge */ + sync + sw zero, 0x0020(a0) /* Auto Refresh */ + sync + sw zero, 0x0030(a0) /* Sleep */ + sync + + DO_SLEEP + +END(alchemy_sleep_au1000) + +/* sleep code for Au1550/Au1200 memory controller type */ +LEAF(alchemy_sleep_au1550) + + SETUP_SLEEP + + /* cache following instructions, as memory gets put to sleep */ + la t0, 1f + .set arch=r4000 + cache 0x14, 0(t0) + cache 0x14, 32(t0) + cache 0x14, 64(t0) + cache 0x14, 96(t0) + .set mips0 + +1: lui a0, 0xb400 /* mem_xxx */ + sw zero, 0x08c0(a0) /* Precharge */ + sync + sw zero, 0x08d0(a0) /* Self Refresh */ + sync + + /* wait for sdram to enter self-refresh mode */ + lui t0, 0x0100 +2: lw t1, 0x0850(a0) /* mem_sdstat */ + and t2, t1, t0 + beq t2, zero, 2b + nop + + /* disable SDRAM clocks */ + lui t0, 0xcfff + ori t0, t0, 0xffff + lw t1, 0x0840(a0) /* mem_sdconfiga */ + and t1, t0, t1 /* clear CE[1:0] */ + sw t1, 0x0840(a0) /* mem_sdconfiga */ + sync + + DO_SLEEP + +END(alchemy_sleep_au1550) + +/* sleepcode for Au1300 memory controller type */ +LEAF(alchemy_sleep_au1300) + + SETUP_SLEEP + + /* cache following instructions, as memory gets put to sleep */ + la t0, 2f + la t1, 4f + subu t2, t1, t0 + + .set arch=r4000 + +1: cache 0x14, 0(t0) + subu t2, t2, 32 + bgez t2, 1b + addu t0, t0, 32 + + .set mips0 + +2: lui a0, 0xb400 /* mem_xxx */ + + /* disable all ports in mem_sdportcfga */ + sw zero, 0x868(a0) /* mem_sdportcfga */ + sync + + /* disable ODT */ + li t0, 0x03010000 + sw t0, 0x08d8(a0) /* mem_sdcmd0 */ + sw t0, 0x08dc(a0) /* mem_sdcmd1 */ + sync + + /* precharge */ + li t0, 0x23000400 + sw t0, 0x08dc(a0) /* mem_sdcmd1 */ + sw t0, 0x08d8(a0) /* mem_sdcmd0 */ + sync + + /* auto refresh */ + sw zero, 0x08c8(a0) /* mem_sdautoref */ + sync + + /* block access to the DDR */ + lw t0, 0x0848(a0) /* mem_sdconfigb */ + li t1, (1 << 7 | 0x3F) + or t0, t0, t1 + sw t0, 0x0848(a0) /* mem_sdconfigb */ + sync + + /* issue the Self Refresh command */ + li t0, 0x10000000 + sw t0, 0x08dc(a0) /* mem_sdcmd1 */ + sw t0, 0x08d8(a0) /* mem_sdcmd0 */ + sync + + /* wait for sdram to enter self-refresh mode */ + lui t0, 0x0300 +3: lw t1, 0x0850(a0) /* mem_sdstat */ + and t2, t1, t0 + bne t2, t0, 3b + nop + + /* disable SDRAM clocks */ + li t0, ~(3<<28) + lw t1, 0x0840(a0) /* mem_sdconfiga */ + and t1, t1, t0 /* clear CE[1:0] */ + sw t1, 0x0840(a0) /* mem_sdconfiga */ + sync + + DO_SLEEP +4: + +END(alchemy_sleep_au1300) + + + /* This is where we return upon wakeup. + * Reload all of the registers and return. + */ +LEAF(alchemy_sleep_wakeup) + lw k0, 0x20(sp) + mtc0 k0, CP0_STATUS + lw k0, 0x1c(sp) + mtc0 k0, CP0_CONTEXT + lw k0, 0x18(sp) + mtc0 k0, CP0_PAGEMASK + lw k0, 0x14(sp) + mtc0 k0, CP0_CONFIG + + /* We need to catch the early Alchemy SOCs with + * the write-only Config[OD] bit and set it back to one... + */ + jal au1x00_fixup_config_od + nop + lw $1, PT_R1(sp) + lw $2, PT_R2(sp) + lw $3, PT_R3(sp) + lw $4, PT_R4(sp) + lw $5, PT_R5(sp) + lw $6, PT_R6(sp) + lw $7, PT_R7(sp) + lw $16, PT_R16(sp) + lw $17, PT_R17(sp) + lw $18, PT_R18(sp) + lw $19, PT_R19(sp) + lw $20, PT_R20(sp) + lw $21, PT_R21(sp) + lw $22, PT_R22(sp) + lw $23, PT_R23(sp) + lw $26, PT_R26(sp) + lw $27, PT_R27(sp) + lw $28, PT_R28(sp) + lw $30, PT_R30(sp) + lw $31, PT_R31(sp) + jr ra + addiu sp, PT_SIZE +END(alchemy_sleep_wakeup) diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c new file mode 100644 index 000000000..50e17e13c --- /dev/null +++ b/arch/mips/alchemy/common/time.c @@ -0,0 +1,176 @@ +/* + * Copyright (C) 2008-2009 Manuel Lauss + * + * Previous incarnations were: + * Copyright (C) 2001, 2006, 2008 MontaVista Software, + * Copied and modified Carsten Langgaard's time.c + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * Clocksource/event using the 32.768kHz-clocked Counter1 ('RTC' in the + * databooks). Firmware/Board init code must enable the counters in the + * counter control register, otherwise the CP0 counter clocksource/event + * will be installed instead (and use of 'wait' instruction is prohibited). + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +/* 32kHz clock enabled and detected */ +#define CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S) + +static cycle_t au1x_counter1_read(struct clocksource *cs) +{ + return alchemy_rdsys(AU1000_SYS_RTCREAD); +} + +static struct clocksource au1x_counter1_clocksource = { + .name = "alchemy-counter1", + .read = au1x_counter1_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .rating = 1500, +}; + +static int au1x_rtcmatch2_set_next_event(unsigned long delta, + struct clock_event_device *cd) +{ + delta += alchemy_rdsys(AU1000_SYS_RTCREAD); + /* wait for register access */ + while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_M21) + ; + alchemy_wrsys(delta, AU1000_SYS_RTCMATCH2); + + return 0; +} + +static void au1x_rtcmatch2_set_mode(enum clock_event_mode mode, + struct clock_event_device *cd) +{ +} + +static irqreturn_t au1x_rtcmatch2_irq(int irq, void *dev_id) +{ + struct clock_event_device *cd = dev_id; + cd->event_handler(cd); + return IRQ_HANDLED; +} + +static struct clock_event_device au1x_rtcmatch2_clockdev = { + .name = "rtcmatch2", + .features = CLOCK_EVT_FEAT_ONESHOT, + .rating = 1500, + .set_next_event = au1x_rtcmatch2_set_next_event, + .set_mode = au1x_rtcmatch2_set_mode, + .cpumask = cpu_all_mask, +}; + +static struct irqaction au1x_rtcmatch2_irqaction = { + .handler = au1x_rtcmatch2_irq, + .flags = IRQF_TIMER, + .name = "timer", + .dev_id = &au1x_rtcmatch2_clockdev, +}; + +static int __init alchemy_time_init(unsigned int m2int) +{ + struct clock_event_device *cd = &au1x_rtcmatch2_clockdev; + unsigned long t; + + au1x_rtcmatch2_clockdev.irq = m2int; + + /* Check if firmware (YAMON, ...) has enabled 32kHz and clock + * has been detected. If so install the rtcmatch2 clocksource, + * otherwise don't bother. Note that both bits being set is by + * no means a definite guarantee that the counters actually work + * (the 32S bit seems to be stuck set to 1 once a single clock- + * edge is detected, hence the timeouts). + */ + if (CNTR_OK != (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & CNTR_OK)) + goto cntr_err; + + /* + * setup counter 1 (RTC) to tick at full speed + */ + t = 0xffffff; + while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_T1S) && --t) + asm volatile ("nop"); + if (!t) + goto cntr_err; + + alchemy_wrsys(0, AU1000_SYS_RTCTRIM); /* 32.768 kHz */ + + t = 0xffffff; + while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C1S) && --t) + asm volatile ("nop"); + if (!t) + goto cntr_err; + alchemy_wrsys(0, AU1000_SYS_RTCWRITE); + + t = 0xffffff; + while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C1S) && --t) + asm volatile ("nop"); + if (!t) + goto cntr_err; + + /* register counter1 clocksource and event device */ + clocksource_register_hz(&au1x_counter1_clocksource, 32768); + + cd->shift = 32; + cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift); + cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd); + cd->min_delta_ns = clockevent_delta2ns(9, cd); /* ~0.28ms */ + clockevents_register_device(cd); + setup_irq(m2int, &au1x_rtcmatch2_irqaction); + + printk(KERN_INFO "Alchemy clocksource installed\n"); + + return 0; + +cntr_err: + return -1; +} + +static int alchemy_m2inttab[] __initdata = { + AU1000_RTC_MATCH2_INT, + AU1500_RTC_MATCH2_INT, + AU1100_RTC_MATCH2_INT, + AU1550_RTC_MATCH2_INT, + AU1200_RTC_MATCH2_INT, + AU1300_RTC_MATCH2_INT, +}; + +void __init plat_time_init(void) +{ + int t; + + t = alchemy_get_cputype(); + if (t == ALCHEMY_CPU_UNKNOWN || + alchemy_time_init(alchemy_m2inttab[t])) + cpu_wait = NULL; /* wait doesn't work with r4k timer */ +} diff --git a/arch/mips/alchemy/common/usb.c b/arch/mips/alchemy/common/usb.c new file mode 100644 index 000000000..297805ade --- /dev/null +++ b/arch/mips/alchemy/common/usb.c @@ -0,0 +1,626 @@ +/* + * USB block power/access management abstraction. + * + * Au1000+: The OHCI block control register is at the far end of the OHCI memory + * area. Au1550 has OHCI on different base address. No need to handle + * UDC here. + * Au1200: one register to control access and clocks to O/EHCI, UDC and OTG + * as well as the PHY for EHCI and UDC. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* control register offsets */ +#define AU1000_OHCICFG 0x7fffc +#define AU1550_OHCICFG 0x07ffc +#define AU1200_USBCFG 0x04 + +/* Au1000 USB block config bits */ +#define USBHEN_RD (1 << 4) /* OHCI reset-done indicator */ +#define USBHEN_CE (1 << 3) /* OHCI block clock enable */ +#define USBHEN_E (1 << 2) /* OHCI block enable */ +#define USBHEN_C (1 << 1) /* OHCI block coherency bit */ +#define USBHEN_BE (1 << 0) /* OHCI Big-Endian */ + +/* Au1200 USB config bits */ +#define USBCFG_PFEN (1 << 31) /* prefetch enable (undoc) */ +#define USBCFG_RDCOMB (1 << 30) /* read combining (undoc) */ +#define USBCFG_UNKNOWN (5 << 20) /* unknown, leave this way */ +#define USBCFG_SSD (1 << 23) /* serial short detect en */ +#define USBCFG_PPE (1 << 19) /* HS PHY PLL */ +#define USBCFG_UCE (1 << 18) /* UDC clock enable */ +#define USBCFG_ECE (1 << 17) /* EHCI clock enable */ +#define USBCFG_OCE (1 << 16) /* OHCI clock enable */ +#define USBCFG_FLA(x) (((x) & 0x3f) << 8) +#define USBCFG_UCAM (1 << 7) /* coherent access (undoc) */ +#define USBCFG_GME (1 << 6) /* OTG mem access */ +#define USBCFG_DBE (1 << 5) /* UDC busmaster enable */ +#define USBCFG_DME (1 << 4) /* UDC mem enable */ +#define USBCFG_EBE (1 << 3) /* EHCI busmaster enable */ +#define USBCFG_EME (1 << 2) /* EHCI mem enable */ +#define USBCFG_OBE (1 << 1) /* OHCI busmaster enable */ +#define USBCFG_OME (1 << 0) /* OHCI mem enable */ +#define USBCFG_INIT_AU1200 (USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\ + USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \ + USBCFG_GME | USBCFG_DBE | USBCFG_DME | \ + USBCFG_EBE | USBCFG_EME | USBCFG_OBE | \ + USBCFG_OME) + +/* Au1300 USB config registers */ +#define USB_DWC_CTRL1 0x00 +#define USB_DWC_CTRL2 0x04 +#define USB_VBUS_TIMER 0x10 +#define USB_SBUS_CTRL 0x14 +#define USB_MSR_ERR 0x18 +#define USB_DWC_CTRL3 0x1C +#define USB_DWC_CTRL4 0x20 +#define USB_OTG_STATUS 0x28 +#define USB_DWC_CTRL5 0x2C +#define USB_DWC_CTRL6 0x30 +#define USB_DWC_CTRL7 0x34 +#define USB_PHY_STATUS 0xC0 +#define USB_INT_STATUS 0xC4 +#define USB_INT_ENABLE 0xC8 + +#define USB_DWC_CTRL1_OTGD 0x04 /* set to DISable OTG */ +#define USB_DWC_CTRL1_HSTRS 0x02 /* set to ENable EHCI */ +#define USB_DWC_CTRL1_DCRS 0x01 /* set to ENable UDC */ + +#define USB_DWC_CTRL2_PHY1RS 0x04 /* set to enable PHY1 */ +#define USB_DWC_CTRL2_PHY0RS 0x02 /* set to enable PHY0 */ +#define USB_DWC_CTRL2_PHYRS 0x01 /* set to enable PHY */ + +#define USB_DWC_CTRL3_OHCI1_CKEN (1 << 19) +#define USB_DWC_CTRL3_OHCI0_CKEN (1 << 18) +#define USB_DWC_CTRL3_EHCI0_CKEN (1 << 17) +#define USB_DWC_CTRL3_OTG0_CKEN (1 << 16) + +#define USB_SBUS_CTRL_SBCA 0x04 /* coherent access */ + +#define USB_INTEN_FORCE 0x20 +#define USB_INTEN_PHY 0x10 +#define USB_INTEN_UDC 0x08 +#define USB_INTEN_EHCI 0x04 +#define USB_INTEN_OHCI1 0x02 +#define USB_INTEN_OHCI0 0x01 + +static DEFINE_SPINLOCK(alchemy_usb_lock); + +static inline void __au1300_usb_phyctl(void __iomem *base, int enable) +{ + unsigned long r, s; + + r = __raw_readl(base + USB_DWC_CTRL2); + s = __raw_readl(base + USB_DWC_CTRL3); + + s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN | + USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN; + + if (enable) { + /* simply enable all PHYs */ + r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS | + USB_DWC_CTRL2_PHYRS; + __raw_writel(r, base + USB_DWC_CTRL2); + wmb(); + } else if (!s) { + /* no USB block active, do disable all PHYs */ + r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS | + USB_DWC_CTRL2_PHYRS); + __raw_writel(r, base + USB_DWC_CTRL2); + wmb(); + } +} + +static inline void __au1300_ohci_control(void __iomem *base, int enable, int id) +{ + unsigned long r; + + if (enable) { + __raw_writel(1, base + USB_DWC_CTRL7); /* start OHCI clock */ + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); /* enable OHCI block */ + r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN + : USB_DWC_CTRL3_OHCI1_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); /* power up the PHYs */ + + r = __raw_readl(base + USB_INT_ENABLE); + r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + /* reset the OHCI start clock bit */ + __raw_writel(0, base + USB_DWC_CTRL7); + wmb(); + } else { + r = __raw_readl(base + USB_INT_ENABLE); + r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1); + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); + r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN + : USB_DWC_CTRL3_OHCI1_CKEN); + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline void __au1300_ehci_control(void __iomem *base, int enable) +{ + unsigned long r; + + if (enable) { + r = __raw_readl(base + USB_DWC_CTRL3); + r |= USB_DWC_CTRL3_EHCI0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r |= USB_DWC_CTRL1_HSTRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + + r = __raw_readl(base + USB_INT_ENABLE); + r |= USB_INTEN_EHCI; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + } else { + r = __raw_readl(base + USB_INT_ENABLE); + r &= ~USB_INTEN_EHCI; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r &= ~USB_DWC_CTRL1_HSTRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); + r &= ~USB_DWC_CTRL3_EHCI0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline void __au1300_udc_control(void __iomem *base, int enable) +{ + unsigned long r; + + if (enable) { + r = __raw_readl(base + USB_DWC_CTRL1); + r |= USB_DWC_CTRL1_DCRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + + r = __raw_readl(base + USB_INT_ENABLE); + r |= USB_INTEN_UDC; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + } else { + r = __raw_readl(base + USB_INT_ENABLE); + r &= ~USB_INTEN_UDC; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r &= ~USB_DWC_CTRL1_DCRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline void __au1300_otg_control(void __iomem *base, int enable) +{ + unsigned long r; + if (enable) { + r = __raw_readl(base + USB_DWC_CTRL3); + r |= USB_DWC_CTRL3_OTG0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r &= ~USB_DWC_CTRL1_OTGD; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + } else { + r = __raw_readl(base + USB_DWC_CTRL1); + r |= USB_DWC_CTRL1_OTGD; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); + r &= ~USB_DWC_CTRL3_OTG0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline int au1300_usb_control(int block, int enable) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); + int ret = 0; + + switch (block) { + case ALCHEMY_USB_OHCI0: + __au1300_ohci_control(base, enable, 0); + break; + case ALCHEMY_USB_OHCI1: + __au1300_ohci_control(base, enable, 1); + break; + case ALCHEMY_USB_EHCI0: + __au1300_ehci_control(base, enable); + break; + case ALCHEMY_USB_UDC0: + __au1300_udc_control(base, enable); + break; + case ALCHEMY_USB_OTG0: + __au1300_otg_control(base, enable); + break; + default: + ret = -ENODEV; + } + return ret; +} + +static inline void au1300_usb_init(void) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); + + /* set some sane defaults. Note: we don't fiddle with DWC_CTRL4 + * here at all: Port 2 routing (EHCI or UDC) must be set either + * by boot firmware or platform init code; I can't autodetect + * a sane setting. + */ + __raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */ + wmb(); + __raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */ + wmb(); + __raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */ + wmb(); + __raw_writel(~0, base + USB_INT_STATUS); /* clear int status */ + wmb(); + /* set coherent access bit */ + __raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL); + wmb(); +} + +static inline void __au1200_ohci_control(void __iomem *base, int enable) +{ + unsigned long r = __raw_readl(base + AU1200_USBCFG); + if (enable) { + __raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG); + wmb(); + udelay(2000); + } else { + __raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG); + wmb(); + udelay(1000); + } +} + +static inline void __au1200_ehci_control(void __iomem *base, int enable) +{ + unsigned long r = __raw_readl(base + AU1200_USBCFG); + if (enable) { + __raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG); + wmb(); + udelay(1000); + } else { + if (!(r & USBCFG_UCE)) /* UDC also off? */ + r &= ~USBCFG_PPE; /* yes: disable HS PHY PLL */ + __raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG); + wmb(); + udelay(1000); + } +} + +static inline void __au1200_udc_control(void __iomem *base, int enable) +{ + unsigned long r = __raw_readl(base + AU1200_USBCFG); + if (enable) { + __raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG); + wmb(); + } else { + if (!(r & USBCFG_ECE)) /* EHCI also off? */ + r &= ~USBCFG_PPE; /* yes: disable HS PHY PLL */ + __raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG); + wmb(); + } +} + +static inline int au1200_usb_control(int block, int enable) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR); + + switch (block) { + case ALCHEMY_USB_OHCI0: + __au1200_ohci_control(base, enable); + break; + case ALCHEMY_USB_UDC0: + __au1200_udc_control(base, enable); + break; + case ALCHEMY_USB_EHCI0: + __au1200_ehci_control(base, enable); + break; + default: + return -ENODEV; + } + return 0; +} + + +/* initialize USB block(s) to a known working state */ +static inline void au1200_usb_init(void) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR); + __raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG); + wmb(); + udelay(1000); +} + +static inline int au1000_usb_init(unsigned long rb, int reg) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg); + unsigned long r = __raw_readl(base); + struct clk *c; + + /* 48MHz check. Don't init if no one can provide it */ + c = clk_get(NULL, "usbh_clk"); + if (IS_ERR(c)) + return -ENODEV; + if (clk_round_rate(c, 48000000) != 48000000) { + clk_put(c); + return -ENODEV; + } + if (clk_set_rate(c, 48000000)) { + clk_put(c); + return -ENODEV; + } + clk_put(c); + +#if defined(__BIG_ENDIAN) + r |= USBHEN_BE; +#endif + r |= USBHEN_C; + + __raw_writel(r, base); + wmb(); + udelay(1000); + + return 0; +} + + +static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(rb); + unsigned long r = __raw_readl(base + creg); + struct clk *c = clk_get(NULL, "usbh_clk"); + + if (IS_ERR(c)) + return; + + if (enable) { + if (clk_prepare_enable(c)) + goto out; + + __raw_writel(r | USBHEN_CE, base + creg); + wmb(); + udelay(1000); + __raw_writel(r | USBHEN_CE | USBHEN_E, base + creg); + wmb(); + udelay(1000); + + /* wait for reset complete (read reg twice: au1500 erratum) */ + while (__raw_readl(base + creg), + !(__raw_readl(base + creg) & USBHEN_RD)) + udelay(1000); + } else { + __raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg); + wmb(); + clk_disable_unprepare(c); + } +out: + clk_put(c); +} + +static inline int au1000_usb_control(int block, int enable, unsigned long rb, + int creg) +{ + int ret = 0; + + switch (block) { + case ALCHEMY_USB_OHCI0: + __au1xx0_ohci_control(enable, rb, creg); + break; + default: + ret = -ENODEV; + } + return ret; +} + +/* + * alchemy_usb_control - control Alchemy on-chip USB blocks + * @block: USB block to target + * @enable: set 1 to enable a block, 0 to disable + */ +int alchemy_usb_control(int block, int enable) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&alchemy_usb_lock, flags); + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1100: + ret = au1000_usb_control(block, enable, + AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG); + break; + case ALCHEMY_CPU_AU1550: + ret = au1000_usb_control(block, enable, + AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG); + break; + case ALCHEMY_CPU_AU1200: + ret = au1200_usb_control(block, enable); + break; + case ALCHEMY_CPU_AU1300: + ret = au1300_usb_control(block, enable); + break; + default: + ret = -ENODEV; + } + spin_unlock_irqrestore(&alchemy_usb_lock, flags); + return ret; +} +EXPORT_SYMBOL_GPL(alchemy_usb_control); + + +static unsigned long alchemy_usb_pmdata[2]; + +static void au1000_usb_pm(unsigned long br, int creg, int susp) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(br); + + if (susp) { + alchemy_usb_pmdata[0] = __raw_readl(base + creg); + /* There appears to be some undocumented reset register.... */ + __raw_writel(0, base + 0x04); + wmb(); + __raw_writel(0, base + creg); + wmb(); + } else { + __raw_writel(alchemy_usb_pmdata[0], base + creg); + wmb(); + } +} + +static void au1200_usb_pm(int susp) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR); + if (susp) { + /* save OTG_CAP/MUX registers which indicate port routing */ + /* FIXME: write an OTG driver to do that */ + alchemy_usb_pmdata[0] = __raw_readl(base + 0x00); + alchemy_usb_pmdata[1] = __raw_readl(base + 0x04); + } else { + /* restore access to all MMIO areas */ + au1200_usb_init(); + + /* restore OTG_CAP/MUX registers */ + __raw_writel(alchemy_usb_pmdata[0], base + 0x00); + __raw_writel(alchemy_usb_pmdata[1], base + 0x04); + wmb(); + } +} + +static void au1300_usb_pm(int susp) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); + /* remember Port2 routing */ + if (susp) { + alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4); + } else { + au1300_usb_init(); + __raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4); + wmb(); + } +} + +static void alchemy_usb_pm(int susp) +{ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1100: + au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp); + break; + case ALCHEMY_CPU_AU1550: + au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp); + break; + case ALCHEMY_CPU_AU1200: + au1200_usb_pm(susp); + break; + case ALCHEMY_CPU_AU1300: + au1300_usb_pm(susp); + break; + } +} + +static int alchemy_usb_suspend(void) +{ + alchemy_usb_pm(1); + return 0; +} + +static void alchemy_usb_resume(void) +{ + alchemy_usb_pm(0); +} + +static struct syscore_ops alchemy_usb_pm_ops = { + .suspend = alchemy_usb_suspend, + .resume = alchemy_usb_resume, +}; + +static int __init alchemy_usb_init(void) +{ + int ret = 0; + + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1100: + ret = au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR, + AU1000_OHCICFG); + break; + case ALCHEMY_CPU_AU1550: + ret = au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR, + AU1550_OHCICFG); + break; + case ALCHEMY_CPU_AU1200: + au1200_usb_init(); + break; + case ALCHEMY_CPU_AU1300: + au1300_usb_init(); + break; + } + + if (!ret) + register_syscore_ops(&alchemy_usb_pm_ops); + + return ret; +} +arch_initcall(alchemy_usb_init); diff --git a/arch/mips/alchemy/common/vss.c b/arch/mips/alchemy/common/vss.c new file mode 100644 index 000000000..d23b1444d --- /dev/null +++ b/arch/mips/alchemy/common/vss.c @@ -0,0 +1,84 @@ +/* + * Au1300 media block power gating (VSS) + * + * This is a stop-gap solution until I have the clock framework integration + * ready. This stuff here really must be handled transparently when clocks + * for various media blocks are enabled/disabled. + */ + +#include +#include +#include + +#define VSS_GATE 0x00 /* gate wait timers */ +#define VSS_CLKRST 0x04 /* clock/block control */ +#define VSS_FTR 0x08 /* footers */ + +#define VSS_ADDR(blk) (KSEG1ADDR(AU1300_VSS_PHYS_ADDR) + (blk * 0x0c)) + +static DEFINE_SPINLOCK(au1300_vss_lock); + +/* enable a block as outlined in the databook */ +static inline void __enable_block(int block) +{ + void __iomem *base = (void __iomem *)VSS_ADDR(block); + + __raw_writel(3, base + VSS_CLKRST); /* enable clock, assert reset */ + wmb(); + + __raw_writel(0x01fffffe, base + VSS_GATE); /* maximum setup time */ + wmb(); + + /* enable footers in sequence */ + __raw_writel(0x01, base + VSS_FTR); + wmb(); + __raw_writel(0x03, base + VSS_FTR); + wmb(); + __raw_writel(0x07, base + VSS_FTR); + wmb(); + __raw_writel(0x0f, base + VSS_FTR); + wmb(); + + __raw_writel(0x01ffffff, base + VSS_GATE); /* start FSM too */ + wmb(); + + __raw_writel(2, base + VSS_CLKRST); /* deassert reset */ + wmb(); + + __raw_writel(0x1f, base + VSS_FTR); /* enable isolation cells */ + wmb(); +} + +/* disable a block as outlined in the databook */ +static inline void __disable_block(int block) +{ + void __iomem *base = (void __iomem *)VSS_ADDR(block); + + __raw_writel(0x0f, base + VSS_FTR); /* disable isolation cells */ + wmb(); + __raw_writel(0, base + VSS_GATE); /* disable FSM */ + wmb(); + __raw_writel(3, base + VSS_CLKRST); /* assert reset */ + wmb(); + __raw_writel(1, base + VSS_CLKRST); /* disable clock */ + wmb(); + __raw_writel(0, base + VSS_FTR); /* disable all footers */ + wmb(); +} + +void au1300_vss_block_control(int block, int enable) +{ + unsigned long flags; + + if (alchemy_get_cputype() != ALCHEMY_CPU_AU1300) + return; + + /* only one block at a time */ + spin_lock_irqsave(&au1300_vss_lock, flags); + if (enable) + __enable_block(block); + else + __disable_block(block); + spin_unlock_irqrestore(&au1300_vss_lock, flags); +} +EXPORT_SYMBOL_GPL(au1300_vss_block_control); -- cgit v1.2.3