From 863981e96738983919de841ec669e157e6bdaeb0 Mon Sep 17 00:00:00 2001 From: AndrĂ© Fabian Silva Delgado Date: Sun, 11 Sep 2016 04:34:46 -0300 Subject: Linux-libre 4.7.1-gnu --- arch/mips/boot/compressed/Makefile | 5 + arch/mips/boot/dts/brcm/Makefile | 2 + arch/mips/boot/dts/brcm/bcm6328.dtsi | 50 +- arch/mips/boot/dts/brcm/bcm6358.dtsi | 130 ++++ arch/mips/boot/dts/brcm/bcm6368.dtsi | 32 +- arch/mips/boot/dts/brcm/bcm7125.dtsi | 69 ++- arch/mips/boot/dts/brcm/bcm7346.dtsi | 6 +- arch/mips/boot/dts/brcm/bcm7358.dtsi | 2 - arch/mips/boot/dts/brcm/bcm7360.dtsi | 42 +- arch/mips/boot/dts/brcm/bcm7362.dtsi | 6 +- arch/mips/boot/dts/brcm/bcm7420.dtsi | 77 ++- arch/mips/boot/dts/brcm/bcm7425.dtsi | 100 ++- arch/mips/boot/dts/brcm/bcm7435.dtsi | 141 ++++- arch/mips/boot/dts/brcm/bcm96358nb4ser.dts | 46 ++ arch/mips/boot/dts/brcm/bcm96368mvwg.dts | 4 +- arch/mips/boot/dts/brcm/bcm97125cbmb.dts | 24 + arch/mips/boot/dts/brcm/bcm97360svmb.dts | 8 + arch/mips/boot/dts/brcm/bcm97420c.dts | 28 + arch/mips/boot/dts/brcm/bcm97425svmb.dts | 28 + arch/mips/boot/dts/brcm/bcm97435svmb.dts | 38 +- .../boot/dts/cavium-octeon/dlink_dsr-1000n.dts | 78 +++ arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts | 205 +------ arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dtsi | 231 +++++++ arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts | 59 ++ arch/mips/boot/dts/ingenic/jz4740.dtsi | 16 +- arch/mips/boot/dts/lantiq/easy50712.dts | 2 +- arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi | 236 ------- arch/mips/boot/dts/pic32/pic32mzda.dtsi | 63 +- arch/mips/boot/dts/pic32/pic32mzda_sk.dts | 5 +- arch/mips/boot/dts/qca/Makefile | 7 +- arch/mips/boot/dts/qca/ar9132.dtsi | 17 +- arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts | 98 ++- arch/mips/boot/dts/qca/ar9331.dtsi | 155 +++++ arch/mips/boot/dts/qca/ar9331_dpt_module.dts | 78 +++ arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts | 102 ++++ arch/mips/boot/dts/qca/ar9331_omega.dts | 78 +++ arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts | 118 ++++ arch/mips/boot/dts/ralink/mt7620a.dtsi | 2 +- arch/mips/boot/dts/ralink/rt2880.dtsi | 2 +- arch/mips/boot/dts/ralink/rt3050.dtsi | 2 +- arch/mips/boot/dts/ralink/rt3883.dtsi | 2 +- arch/mips/boot/dts/xilfpga/nexys4ddr.dts | 2 +- arch/mips/boot/tools/.gitignore | 1 + arch/mips/boot/tools/Makefile | 8 + arch/mips/boot/tools/relocs.c | 680 +++++++++++++++++++++ arch/mips/boot/tools/relocs.h | 45 ++ arch/mips/boot/tools/relocs_32.c | 17 + arch/mips/boot/tools/relocs_64.c | 27 + arch/mips/boot/tools/relocs_main.c | 84 +++ 49 files changed, 2672 insertions(+), 586 deletions(-) create mode 100644 arch/mips/boot/dts/brcm/bcm6358.dtsi create mode 100644 arch/mips/boot/dts/brcm/bcm96358nb4ser.dts create mode 100644 arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts create mode 100644 arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dtsi create mode 100644 arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts delete mode 100644 arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi create mode 100644 arch/mips/boot/dts/qca/ar9331.dtsi create mode 100644 arch/mips/boot/dts/qca/ar9331_dpt_module.dts create mode 100644 arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts create mode 100644 arch/mips/boot/dts/qca/ar9331_omega.dts create mode 100644 arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts create mode 100644 arch/mips/boot/tools/.gitignore create mode 100644 arch/mips/boot/tools/Makefile create mode 100644 arch/mips/boot/tools/relocs.c create mode 100644 arch/mips/boot/tools/relocs.h create mode 100644 arch/mips/boot/tools/relocs_32.c create mode 100644 arch/mips/boot/tools/relocs_64.c create mode 100644 arch/mips/boot/tools/relocs_main.c (limited to 'arch/mips/boot') diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile index 309d2ad67..90aca95fe 100644 --- a/arch/mips/boot/compressed/Makefile +++ b/arch/mips/boot/compressed/Makefile @@ -37,8 +37,13 @@ vmlinuzobjs-$(CONFIG_DEBUG_ZBOOT) += $(obj)/dbg.o vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM) += $(obj)/uart-prom.o vmlinuzobjs-$(CONFIG_MIPS_ALCHEMY) += $(obj)/uart-alchemy.o +vmlinuzobjs-$(CONFIG_ATH79) += $(obj)/uart-ath79.o endif +extra-y += uart-ath79.c +$(obj)/uart-ath79.c: $(srctree)/arch/mips/ath79/early_printk.c + $(call cmd,shipped) + vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o $(obj)/bswapsi.o extra-y += ashldi3.c bswapsi.c diff --git a/arch/mips/boot/dts/brcm/Makefile b/arch/mips/boot/dts/brcm/Makefile index eabeb603e..fda9d387c 100644 --- a/arch/mips/boot/dts/brcm/Makefile +++ b/arch/mips/boot/dts/brcm/Makefile @@ -1,5 +1,6 @@ dtb-$(CONFIG_DT_BCM93384WVG) += bcm93384wvg.dtb dtb-$(CONFIG_DT_BCM93384WVG_VIPER) += bcm93384wvg_viper.dtb +dtb-$(CONFIG_DT_BCM96358NB4SER) += bcm96358nb4ser.dtb dtb-$(CONFIG_DT_BCM96368MVWG) += bcm96368mvwg.dtb dtb-$(CONFIG_DT_BCM9EJTAGPRB) += bcm9ejtagprb.dtb dtb-$(CONFIG_DT_BCM97125CBMB) += bcm97125cbmb.dtb @@ -14,6 +15,7 @@ dtb-$(CONFIG_DT_BCM97435SVMB) += bcm97435svmb.dtb dtb-$(CONFIG_DT_NONE) += \ bcm93384wvg.dtb \ bcm93384wvg_viper.dtb \ + bcm96358nb4ser.dtb \ bcm96368mvwg.dtb \ bcm9ejtagprb.dtb \ bcm97125cbmb.dtb \ diff --git a/arch/mips/boot/dts/brcm/bcm6328.dtsi b/arch/mips/boot/dts/brcm/bcm6328.dtsi index 9d19236f5..5633b9d90 100644 --- a/arch/mips/boot/dts/brcm/bcm6328.dtsi +++ b/arch/mips/boot/dts/brcm/bcm6328.dtsi @@ -23,7 +23,7 @@ }; clocks { - periph_clk: periph_clk { + periph_clk: periph-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; @@ -31,11 +31,11 @@ }; aliases { - leds0 = &leds0; - uart0 = &uart0; + serial0 = &uart0; + serial1 = &uart1; }; - cpu_intc: cpu_intc { + cpu_intc: interrupt-controller { #address-cells = <0>; compatible = "mti,cpu-interrupt-controller"; @@ -50,16 +50,16 @@ compatible = "simple-bus"; ranges; - periph_intc: periph_intc@10000020 { - compatible = "brcm,bcm3380-l2-intc"; - reg = <0x10000024 0x4 0x1000002c 0x4>, - <0x10000020 0x4 0x10000028 0x4>; + periph_intc: interrupt-controller@10000020 { + compatible = "brcm,bcm6345-l1-intc"; + reg = <0x10000020 0x10>, + <0x10000030 0x10>; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&cpu_intc>; - interrupts = <2>; + interrupts = <2>, <3>; }; uart0: serial@10000100 { @@ -71,13 +71,22 @@ status = "disabled"; }; - timer: timer@10000040 { + uart1: serial@10000120 { + compatible = "brcm,bcm6345-uart"; + reg = <0x10000120 0x18>; + interrupt-parent = <&periph_intc>; + interrupts = <39>; + clocks = <&periph_clk>; + status = "disabled"; + }; + + timer: syscon@10000040 { compatible = "syscon"; reg = <0x10000040 0x2c>; native-endian; }; - reboot { + reboot: syscon-reboot@10000068 { compatible = "syscon-reboot"; regmap = <&timer>; offset = <0x28>; @@ -91,5 +100,24 @@ reg = <0x10000800 0x24>; status = "disabled"; }; + + ehci: usb@10002500 { + compatible = "brcm,bcm6328-ehci", "generic-ehci"; + reg = <0x10002500 0x100>; + big-endian; + interrupt-parent = <&periph_intc>; + interrupts = <42>; + status = "disabled"; + }; + + ohci: usb@10002600 { + compatible = "brcm,bcm6328-ohci", "generic-ohci"; + reg = <0x10002600 0x100>; + big-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <41>; + status = "disabled"; + }; }; }; diff --git a/arch/mips/boot/dts/brcm/bcm6358.dtsi b/arch/mips/boot/dts/brcm/bcm6358.dtsi new file mode 100644 index 000000000..f9d8d3921 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm6358.dtsi @@ -0,0 +1,130 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6358"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <150000000>; + + cpu@0 { + compatible = "brcm,bmips4350"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips4350"; + device_type = "cpu"; + reg = <1>; + }; + }; + + clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + cpu_intc: interrupt-controller { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + ubus { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges; + + periph_cntl: syscon@fffe0000 { + compatible = "syscon"; + reg = <0xfffe0000 0xc>; + native-endian; + }; + + reboot: syscon-reboot@fffe0008 { + compatible = "syscon-reboot"; + regmap = <&periph_cntl>; + offset = <0x8>; + mask = <0x1>; + }; + + periph_intc: interrupt-controller@fffe000c { + compatible = "brcm,bcm6345-l1-intc"; + reg = <0xfffe000c 0x8>, + <0xfffe0038 0x8>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; + }; + + leds0: led-controller@fffe00d0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6358-leds"; + reg = <0xfffe00d0 0x8>; + + status = "disabled"; + }; + + uart0: serial@fffe0100 { + compatible = "brcm,bcm6345-uart"; + reg = <0xfffe0100 0x18>; + + interrupt-parent = <&periph_intc>; + interrupts = <2>; + + clocks = <&periph_clk>; + + status = "disabled"; + }; + + uart1: serial@fffe0120 { + compatible = "brcm,bcm6345-uart"; + reg = <0xfffe0120 0x18>; + + interrupt-parent = <&periph_intc>; + interrupts = <3>; + + clocks = <&periph_clk>; + + status = "disabled"; + }; + + ehci: usb@fffe1300 { + compatible = "brcm,bcm6358-ehci", "generic-ehci"; + reg = <0xfffe1300 0x100>; + big-endian; + interrupt-parent = <&periph_intc>; + interrupts = <10>; + status = "disabled"; + }; + + ohci: usb@fffe1400 { + compatible = "brcm,bcm6358-ohci", "generic-ohci"; + reg = <0xfffe1400 0x100>; + big-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <5>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm6368.dtsi b/arch/mips/boot/dts/brcm/bcm6368.dtsi index 1f6b9b5cd..d0e3a70b3 100644 --- a/arch/mips/boot/dts/brcm/bcm6368.dtsi +++ b/arch/mips/boot/dts/brcm/bcm6368.dtsi @@ -20,11 +20,10 @@ device_type = "cpu"; reg = <1>; }; - }; clocks { - periph_clk: periph_clk { + periph_clk: periph-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; @@ -32,11 +31,11 @@ }; aliases { - leds0 = &leds0; - uart0 = &uart0; + serial0 = &uart0; + serial1 = &uart1; }; - cpu_intc: cpu_intc { + cpu_intc: interrupt-controller { #address-cells = <0>; compatible = "mti,cpu-interrupt-controller"; @@ -64,16 +63,16 @@ mask = <0x1>; }; - periph_intc: periph_intc@10000020 { - compatible = "brcm,bcm3380-l2-intc"; - reg = <0x10000024 0x4 0x1000002c 0x4>, - <0x10000020 0x4 0x10000028 0x4>; + periph_intc: interrupt-controller@10000020 { + compatible = "brcm,bcm6345-l1-intc"; + reg = <0x10000020 0x10>, + <0x10000030 0x10>; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&cpu_intc>; - interrupts = <2>; + interrupts = <2>, <3>; }; leds0: led-controller@100000d0 { @@ -93,7 +92,16 @@ status = "disabled"; }; - ehci0: usb@10001500 { + uart1: serial@10000120 { + compatible = "brcm,bcm6345-uart"; + reg = <0x10000120 0x18>; + interrupt-parent = <&periph_intc>; + interrupts = <3>; + clocks = <&periph_clk>; + status = "disabled"; + }; + + ehci: usb@10001500 { compatible = "brcm,bcm6368-ehci", "generic-ehci"; reg = <0x10001500 0x100>; big-endian; @@ -102,7 +110,7 @@ status = "disabled"; }; - ohci0: usb@10001600 { + ohci: usb@10001600 { compatible = "brcm,bcm6368-ohci", "generic-ohci"; reg = <0x10001600 0x100>; big-endian; diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi index 3ae16053a..550e1d9e3 100644 --- a/arch/mips/boot/dts/brcm/bcm7125.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi @@ -85,14 +85,15 @@ compatible = "brcm,bcm7120-l2-intc"; reg = <0x406780 0x8>; - brcm,int-map-mask = <0x44>; + brcm,int-map-mask = <0x44>, <0xf000000>; brcm,int-fwd-mask = <0x70000>; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&periph_intc>; - interrupts = <18>; + interrupts = <18>, <19>; + interrupt-names = "upg_main", "upg_bsc"; }; sun_top_ctrl: syscon@404000 { @@ -118,6 +119,70 @@ status = "disabled"; }; + uart1: serial@406b40 { + compatible = "ns16550a"; + reg = <0x406b40 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <64>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@406b80 { + compatible = "ns16550a"; + reg = <0x406b80 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <65>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + bsca: i2c@406200 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406200 0x58>; + interrupts = <24>; + interrupt-names = "upg_bsca"; + status = "disabled"; + }; + + bscb: i2c@406280 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406280 0x58>; + interrupts = <25>; + interrupt-names = "upg_bscb"; + status = "disabled"; + }; + + bscc: i2c@406300 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406300 0x58>; + interrupts = <26>; + interrupt-names = "upg_bscc"; + status = "disabled"; + }; + + bscd: i2c@406380 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406380 0x58>; + interrupts = <27>; + interrupt-names = "upg_bscd"; + status = "disabled"; + }; + ehci0: usb@488300 { compatible = "brcm,bcm7125-ehci", "generic-ehci"; reg = <0x488300 0x100>; diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi index be7991917..ec959061d 100644 --- a/arch/mips/boot/dts/brcm/bcm7346.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi @@ -24,8 +24,6 @@ aliases { uart0 = &uart0; - uart1 = &uart1; - uart2 = &uart2; }; cpu_intc: cpu_intc { @@ -323,8 +321,6 @@ interrupts = <40>; #address-cells = <1>; #size-cells = <0>; - brcm,broken-ncq; - brcm,broken-phy; status = "disabled"; sata0: sata-port@0 { @@ -338,7 +334,7 @@ }; }; - sata_phy: sata-phy@1800000 { + sata_phy: sata-phy@180100 { compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3"; reg = <0x180100 0x0eff>; reg-names = "phy"; diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi index 060805be6..ca57fb5eb 100644 --- a/arch/mips/boot/dts/brcm/bcm7358.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi @@ -18,8 +18,6 @@ aliases { uart0 = &uart0; - uart1 = &uart1; - uart2 = &uart2; }; cpu_intc: cpu_intc { diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi index bcdb09bfe..1c0c3d438 100644 --- a/arch/mips/boot/dts/brcm/bcm7360.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi @@ -18,8 +18,6 @@ aliases { uart0 = &uart0; - uart1 = &uart1; - uart2 = &uart2; }; cpu_intc: cpu_intc { @@ -241,5 +239,45 @@ interrupts = <66>; status = "disabled"; }; + + sata: sata@181000 { + compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0x181000 0xa9c>, <0x180020 0x1c>; + interrupt-parent = <&periph_intc>; + interrupts = <86>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy1>; + }; + }; + + sata_phy: sata-phy@180100 { + compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3"; + reg = <0x180100 0x0eff>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + sata_phy1: sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; }; }; diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi index d3b1b762e..6b4713add 100644 --- a/arch/mips/boot/dts/brcm/bcm7362.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi @@ -24,8 +24,6 @@ aliases { uart0 = &uart0; - uart1 = &uart1; - uart2 = &uart2; }; cpu_intc: cpu_intc { @@ -246,8 +244,6 @@ interrupts = <86>; #address-cells = <1>; #size-cells = <0>; - brcm,broken-ncq; - brcm,broken-phy; status = "disabled"; sata0: sata-port@0 { @@ -261,7 +257,7 @@ }; }; - sata_phy: sata-phy@1800000 { + sata_phy: sata-phy@180100 { compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3"; reg = <0x180100 0x0eff>; reg-names = "phy"; diff --git a/arch/mips/boot/dts/brcm/bcm7420.dtsi b/arch/mips/boot/dts/brcm/bcm7420.dtsi index 3302a1b8a..0586bf662 100644 --- a/arch/mips/boot/dts/brcm/bcm7420.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi @@ -86,14 +86,15 @@ compatible = "brcm,bcm7120-l2-intc"; reg = <0x406780 0x8>; - brcm,int-map-mask = <0x44>; + brcm,int-map-mask = <0x44>, <0x1f000000>; brcm,int-fwd-mask = <0x70000>; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&periph_intc>; - interrupts = <18>; + interrupts = <18>, <19>; + interrupt-names = "upg_main", "upg_bsc"; }; sun_top_ctrl: syscon@404000 { @@ -118,6 +119,78 @@ status = "disabled"; }; + uart1: serial@406b40 { + compatible = "ns16550a"; + reg = <0x406b40 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + interrupt-parent = <&periph_intc>; + interrupts = <64>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@406b80 { + compatible = "ns16550a"; + reg = <0x406b80 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + interrupt-parent = <&periph_intc>; + interrupts = <65>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + bsca: i2c@406200 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406200 0x58>; + interrupts = <24>; + interrupt-names = "upg_bsca"; + status = "disabled"; + }; + + bscb: i2c@406280 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406280 0x58>; + interrupts = <25>; + interrupt-names = "upg_bscb"; + status = "disabled"; + }; + + bscc: i2c@406300 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406300 0x58>; + interrupts = <26>; + interrupt-names = "upg_bscc"; + status = "disabled"; + }; + + bscd: i2c@406380 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406380 0x58>; + interrupts = <27>; + interrupt-names = "upg_bscd"; + status = "disabled"; + }; + + bsce: i2c@406800 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406800 0x58>; + interrupts = <28>; + interrupt-names = "upg_bsce"; + status = "disabled"; + }; + enet0: ethernet@468000 { phy-mode = "internal"; phy-handle = <&phy1>; diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi index 15b27aae1..c1c15edaf 100644 --- a/arch/mips/boot/dts/brcm/bcm7425.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi @@ -87,14 +87,32 @@ compatible = "brcm,bcm7120-l2-intc"; reg = <0x406780 0x8>; - brcm,int-map-mask = <0x44>; + brcm,int-map-mask = <0x44>, <0x7000000>; brcm,int-fwd-mask = <0x70000>; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&periph_intc>; - interrupts = <55>; + interrupts = <55>, <53>; + interrupt-names = "upg_main", "upg_bsc"; + }; + + upg_aon_irq0_intc: upg_aon_irq0_intc@409480 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x409480 0x8>; + + brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>; + brcm,int-fwd-mask = <0>; + brcm,irq-can-wake; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <56>, <54>, <59>; + interrupt-names = "upg_main_aon", "upg_bsc_aon", + "upg_spi"; }; sun_top_ctrl: syscon@404000 { @@ -119,6 +137,78 @@ status = "disabled"; }; + uart1: serial@406b40 { + compatible = "ns16550a"; + reg = <0x406b40 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + interrupt-parent = <&periph_intc>; + interrupts = <62>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@406b80 { + compatible = "ns16550a"; + reg = <0x406b80 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + interrupt-parent = <&periph_intc>; + interrupts = <63>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + bsca: i2c@409180 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_aon_irq0_intc>; + reg = <0x409180 0x58>; + interrupts = <27>; + interrupt-names = "upg_bsca"; + status = "disabled"; + }; + + bscb: i2c@409400 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_aon_irq0_intc>; + reg = <0x409400 0x58>; + interrupts = <28>; + interrupt-names = "upg_bscb"; + status = "disabled"; + }; + + bscc: i2c@406200 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406200 0x58>; + interrupts = <24>; + interrupt-names = "upg_bscc"; + status = "disabled"; + }; + + bscd: i2c@406280 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406280 0x58>; + interrupts = <25>; + interrupt-names = "upg_bscd"; + status = "disabled"; + }; + + bsce: i2c@406300 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406300 0x58>; + interrupts = <26>; + interrupt-names = "upg_bsce"; + status = "disabled"; + }; + enet0: ethernet@b80000 { phy-mode = "internal"; phy-handle = <&phy1>; @@ -227,11 +317,9 @@ reg-names = "ahci", "top-ctrl"; reg = <0x181000 0xa9c>, <0x180020 0x1c>; interrupt-parent = <&periph_intc>; - interrupts = <40>; + interrupts = <41>; #address-cells = <1>; #size-cells = <0>; - brcm,broken-ncq; - brcm,broken-phy; status = "disabled"; sata0: sata-port@0 { @@ -245,7 +333,7 @@ }; }; - sata_phy: sata-phy@1800000 { + sata_phy: sata-phy@180100 { compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3"; reg = <0x180100 0x0eff>; reg-names = "phy"; diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi index 56035e5b7..a874d3a0e 100644 --- a/arch/mips/boot/dts/brcm/bcm7435.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi @@ -7,7 +7,7 @@ #address-cells = <1>; #size-cells = <0>; - mips-hpt-frequency = <163125000>; + mips-hpt-frequency = <175625000>; cpu@0 { compatible = "brcm,bmips5200"; @@ -63,13 +63,14 @@ periph_intc: periph_intc@41b500 { compatible = "brcm,bcm7038-l1-intc"; - reg = <0x41b500 0x40>, <0x41b600 0x40>; + reg = <0x41b500 0x40>, <0x41b600 0x40>, + <0x41b700 0x40>, <0x41b800 0x40>; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&cpu_intc>; - interrupts = <2>, <3>; + interrupts = <2>, <3>, <2>, <3>; }; sun_l2_intc: sun_l2_intc@403000 { @@ -101,14 +102,32 @@ compatible = "brcm,bcm7120-l2-intc"; reg = <0x406780 0x8>; - brcm,int-map-mask = <0x44>; + brcm,int-map-mask = <0x44>, <0x7000000>; brcm,int-fwd-mask = <0x70000>; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&periph_intc>; - interrupts = <60>; + interrupts = <60>, <58>; + interrupt-names = "upg_main", "upg_bsc"; + }; + + upg_aon_irq0_intc: upg_aon_irq0_intc@409480 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x409480 0x8>; + + brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>; + brcm,int-fwd-mask = <0>; + brcm,irq-can-wake; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <61>, <59>, <64>; + interrupt-names = "upg_main_aon", "upg_bsc_aon", + "upg_spi"; }; sun_top_ctrl: syscon@404000 { @@ -133,6 +152,78 @@ status = "disabled"; }; + uart1: serial@406b40 { + compatible = "ns16550a"; + reg = <0x406b40 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + interrupt-parent = <&periph_intc>; + interrupts = <67>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@406b80 { + compatible = "ns16550a"; + reg = <0x406b80 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + interrupt-parent = <&periph_intc>; + interrupts = <68>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + bsca: i2c@406300 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406300 0x58>; + interrupts = <26>; + interrupt-names = "upg_bsca"; + status = "disabled"; + }; + + bscb: i2c@409400 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_aon_irq0_intc>; + reg = <0x409400 0x58>; + interrupts = <28>; + interrupt-names = "upg_bscb"; + status = "disabled"; + }; + + bscc: i2c@406200 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406200 0x58>; + interrupts = <24>; + interrupt-names = "upg_bscc"; + status = "disabled"; + }; + + bscd: i2c@406280 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406280 0x58>; + interrupts = <25>; + interrupt-names = "upg_bscd"; + status = "disabled"; + }; + + bsce: i2c@409180 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_aon_irq0_intc>; + reg = <0x409180 0x58>; + interrupts = <27>; + interrupt-names = "upg_bsce"; + status = "disabled"; + }; + enet0: ethernet@b80000 { phy-mode = "internal"; phy-handle = <&phy1>; @@ -235,5 +326,45 @@ interrupts = <78>; status = "disabled"; }; + + sata: sata@181000 { + compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0x181000 0xa9c>, <0x180020 0x1c>; + interrupt-parent = <&periph_intc>; + interrupts = <45>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy1>; + }; + }; + + sata_phy: sata-phy@180100 { + compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3"; + reg = <0x180100 0x0eff>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + sata_phy1: sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; }; }; diff --git a/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts b/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts new file mode 100644 index 000000000..f41211797 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts @@ -0,0 +1,46 @@ +/dts-v1/; + +/include/ "bcm6358.dtsi" + +/ { + compatible = "sfr,nb4-ser", "brcm,bcm6358"; + model = "SFR Neufbox 4 (Sercomm)"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x02000000>; + }; + + chosen { + stdout-path = &uart0; + }; +}; + +&leds0 { + status = "ok"; + + led@0 { + reg = <0>; + active-low; + label = "nb4-ser:white:alarm"; + }; + led@2 { + reg = <2>; + active-low; + label = "nb4-ser:white:tv"; + }; + led@3 { + reg = <3>; + active-low; + label = "nb4-ser:white:tel"; + }; + led@4 { + reg = <4>; + active-low; + label = "nb4-ser:white:adsl"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm96368mvwg.dts b/arch/mips/boot/dts/brcm/bcm96368mvwg.dts index 0e890c28f..8c71c6845 100644 --- a/arch/mips/boot/dts/brcm/bcm96368mvwg.dts +++ b/arch/mips/boot/dts/brcm/bcm96368mvwg.dts @@ -22,10 +22,10 @@ }; /* FIXME: need to set up USB_CTRL registers first */ -&ehci0 { +&ehci { status = "disabled"; }; -&ohci0 { +&ohci { status = "disabled"; }; diff --git a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts index e046b1109..f2449d147 100644 --- a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts +++ b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts @@ -21,6 +21,30 @@ status = "okay"; }; +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&bsca { + status = "okay"; +}; + +&bscb { + status = "okay"; +}; + +&bscc { + status = "okay"; +}; + +&bscd { + status = "okay"; +}; + /* FIXME: USB is wonky; disable it for now */ &ehci0 { status = "disabled"; diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts index d48462e09..73124be95 100644 --- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts +++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts @@ -56,3 +56,11 @@ &ohci0 { status = "okay"; }; + +&sata { + status = "okay"; +}; + +&sata_phy { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm97420c.dts b/arch/mips/boot/dts/brcm/bcm97420c.dts index 67fe1f3a3..600d57abe 100644 --- a/arch/mips/boot/dts/brcm/bcm97420c.dts +++ b/arch/mips/boot/dts/brcm/bcm97420c.dts @@ -23,6 +23,34 @@ status = "okay"; }; +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&bsca { + status = "okay"; +}; + +&bscb { + status = "okay"; +}; + +&bscc { + status = "okay"; +}; + +&bscd { + status = "okay"; +}; + +&bsce { + status = "okay"; +}; + /* FIXME: MAC driver comes up but cannot attach to PHY */ &enet0 { status = "disabled"; diff --git a/arch/mips/boot/dts/brcm/bcm97425svmb.dts b/arch/mips/boot/dts/brcm/bcm97425svmb.dts index 689c68a4f..119c71480 100644 --- a/arch/mips/boot/dts/brcm/bcm97425svmb.dts +++ b/arch/mips/boot/dts/brcm/bcm97425svmb.dts @@ -23,6 +23,34 @@ status = "okay"; }; +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&bsca { + status = "okay"; +}; + +&bscb { + status = "okay"; +}; + +&bscc { + status = "okay"; +}; + +&bscd { + status = "okay"; +}; + +&bsce { + status = "okay"; +}; + &enet0 { status = "okay"; }; diff --git a/arch/mips/boot/dts/brcm/bcm97435svmb.dts b/arch/mips/boot/dts/brcm/bcm97435svmb.dts index 1df088183..43e3ba27f 100644 --- a/arch/mips/boot/dts/brcm/bcm97435svmb.dts +++ b/arch/mips/boot/dts/brcm/bcm97435svmb.dts @@ -14,7 +14,7 @@ }; chosen { - bootargs = "console=ttyS0,115200 maxcpus=1"; + bootargs = "console=ttyS0,115200"; stdout-path = &uart0; }; }; @@ -23,6 +23,34 @@ status = "okay"; }; +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&bsca { + status = "okay"; +}; + +&bscb { + status = "okay"; +}; + +&bscc { + status = "okay"; +}; + +&bscd { + status = "okay"; +}; + +&bsce { + status = "okay"; +}; + &enet0 { status = "okay"; }; @@ -58,3 +86,11 @@ &ohci3 { status = "okay"; }; + +&sata { + status = "okay"; +}; + +&sata_phy { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts new file mode 100644 index 000000000..d6bc994f7 --- /dev/null +++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts @@ -0,0 +1,78 @@ +/* + * Device tree source for D-Link DSR-1000N. + * + * Written by: Aaro Koskinen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "octeon_3xxx.dtsi" + +/ { + model = "dlink,dsr-1000n"; + + soc@0 { + smi0: mdio@1180000001800 { + phy8: ethernet-phy@8 { + reg = <8>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + }; + + pip: pip@11800a0000000 { + interface@0 { + ethernet@0 { + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + ethernet@1 { + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + ethernet@2 { + phy-handle = <&phy8>; + }; + }; + }; + + twsi0: i2c@1180000001000 { + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + uart0: serial@1180000000800 { + clock-frequency = <500000000>; + }; + + usbn: usbn@1180068000000 { + refclk-frequency = <12000000>; + refclk-type = "crystal"; + }; + }; + + leds { + compatible = "gpio-leds"; + + usb1 { + label = "usb1"; + gpios = <&gpio 9 1>; /* Active low */ + }; + + usb2 { + label = "usb2"; + gpios = <&gpio 10 1>; /* Active low */ + }; + }; + + aliases { + pip = &pip; + }; +}; diff --git a/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts index 9c48e0586..de61f02d3 100644 --- a/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts +++ b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts @@ -1,4 +1,3 @@ -/dts-v1/; /* * OCTEON 3XXX, 5XXX, 63XX device tree skeleton. * @@ -6,56 +5,12 @@ * use. Because of this, it contains a super-set of the available * devices and properties. */ -/ { - compatible = "cavium,octeon-3860"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&ciu>; - - soc@0 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; /* Direct mapping */ - - ciu: interrupt-controller@1070000000000 { - compatible = "cavium,octeon-3860-ciu"; - interrupt-controller; - /* Interrupts are specified by two parts: - * 1) Controller register (0 or 1) - * 2) Bit within the register (0..63) - */ - #interrupt-cells = <2>; - reg = <0x10700 0x00000000 0x0 0x7000>; - }; - gpio: gpio-controller@1070000000800 { - #gpio-cells = <2>; - compatible = "cavium,octeon-3860-gpio"; - reg = <0x10700 0x00000800 0x0 0x100>; - gpio-controller; - /* Interrupts are specified by two parts: - * 1) GPIO pin number (0..15) - * 2) Triggering (1 - edge rising - * 2 - edge falling - * 4 - level active high - * 8 - level active low) - */ - interrupt-controller; - #interrupt-cells = <2>; - /* The GPIO pin connect to 16 consecutive CUI bits */ - interrupts = <0 16>, <0 17>, <0 18>, <0 19>, - <0 20>, <0 21>, <0 22>, <0 23>, - <0 24>, <0 25>, <0 26>, <0 27>, - <0 28>, <0 29>, <0 30>, <0 31>; - }; +/include/ "octeon_3xxx.dtsi" +/ { + soc@0 { smi0: mdio@1180000001800 { - compatible = "cavium,octeon-3860-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x11800 0x00001800 0x0 0x40>; - phy0: ethernet-phy@0 { compatible = "marvell,88e1118"; marvell,reg-init = @@ -220,35 +175,16 @@ }; pip: pip@11800a0000000 { - compatible = "cavium,octeon-3860-pip"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x11800 0xa0000000 0x0 0x2000>; - interface@0 { - compatible = "cavium,octeon-3860-pip-interface"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; /* interface */ - ethernet@0 { - compatible = "cavium,octeon-3860-pip-port"; - reg = <0x0>; /* Port */ - local-mac-address = [ 00 00 00 00 00 00 ]; phy-handle = <&phy2>; cavium,alt-phy-handle = <&phy100>; }; ethernet@1 { - compatible = "cavium,octeon-3860-pip-port"; - reg = <0x1>; /* Port */ - local-mac-address = [ 00 00 00 00 00 00 ]; phy-handle = <&phy3>; cavium,alt-phy-handle = <&phy101>; }; ethernet@2 { - compatible = "cavium,octeon-3860-pip-port"; - reg = <0x2>; /* Port */ - local-mac-address = [ 00 00 00 00 00 00 ]; phy-handle = <&phy4>; cavium,alt-phy-handle = <&phy102>; }; @@ -322,11 +258,6 @@ }; interface@1 { - compatible = "cavium,octeon-3860-pip-interface"; - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; /* interface */ - ethernet@0 { compatible = "cavium,octeon-3860-pip-port"; reg = <0x0>; /* Port */ @@ -355,13 +286,6 @@ }; twsi0: i2c@1180000001000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "cavium,octeon-3860-twsi"; - reg = <0x11800 0x00001000 0x0 0x200>; - interrupts = <0 45>; - clock-frequency = <100000>; - rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; @@ -381,15 +305,6 @@ clock-frequency = <100000>; }; - uart0: serial@1180000000800 { - compatible = "cavium,octeon-3860-uart","ns16550"; - reg = <0x11800 0x00000800 0x0 0x400>; - clock-frequency = <0>; - current-speed = <115200>; - reg-shift = <3>; - interrupts = <0 34>; - }; - uart1: serial@1180000000c00 { compatible = "cavium,octeon-3860-uart","ns16550"; reg = <0x11800 0x00000c00 0x0 0x400>; @@ -409,98 +324,6 @@ }; bootbus: bootbus@1180000000000 { - compatible = "cavium,octeon-3860-bootbus"; - reg = <0x11800 0x00000000 0x0 0x200>; - /* The chip select number and offset */ - #address-cells = <2>; - /* The size of the chip select region */ - #size-cells = <1>; - ranges = <0 0 0x0 0x1f400000 0xc00000>, - <1 0 0x10000 0x30000000 0>, - <2 0 0x10000 0x40000000 0>, - <3 0 0x10000 0x50000000 0>, - <4 0 0x0 0x1d020000 0x10000>, - <5 0 0x0 0x1d040000 0x10000>, - <6 0 0x0 0x1d050000 0x10000>, - <7 0 0x10000 0x90000000 0>; - - cavium,cs-config@0 { - compatible = "cavium,octeon-3860-bootbus-config"; - cavium,cs-index = <0>; - cavium,t-adr = <20>; - cavium,t-ce = <60>; - cavium,t-oe = <60>; - cavium,t-we = <45>; - cavium,t-rd-hld = <35>; - cavium,t-wr-hld = <45>; - cavium,t-pause = <0>; - cavium,t-wait = <0>; - cavium,t-page = <35>; - cavium,t-rd-dly = <0>; - - cavium,pages = <0>; - cavium,bus-width = <8>; - }; - cavium,cs-config@4 { - compatible = "cavium,octeon-3860-bootbus-config"; - cavium,cs-index = <4>; - cavium,t-adr = <320>; - cavium,t-ce = <320>; - cavium,t-oe = <320>; - cavium,t-we = <320>; - cavium,t-rd-hld = <320>; - cavium,t-wr-hld = <320>; - cavium,t-pause = <320>; - cavium,t-wait = <320>; - cavium,t-page = <320>; - cavium,t-rd-dly = <0>; - - cavium,pages = <0>; - cavium,bus-width = <8>; - }; - cavium,cs-config@5 { - compatible = "cavium,octeon-3860-bootbus-config"; - cavium,cs-index = <5>; - cavium,t-adr = <5>; - cavium,t-ce = <300>; - cavium,t-oe = <125>; - cavium,t-we = <150>; - cavium,t-rd-hld = <100>; - cavium,t-wr-hld = <30>; - cavium,t-pause = <0>; - cavium,t-wait = <30>; - cavium,t-page = <320>; - cavium,t-rd-dly = <0>; - - cavium,pages = <0>; - cavium,bus-width = <16>; - }; - cavium,cs-config@6 { - compatible = "cavium,octeon-3860-bootbus-config"; - cavium,cs-index = <6>; - cavium,t-adr = <5>; - cavium,t-ce = <300>; - cavium,t-oe = <270>; - cavium,t-we = <150>; - cavium,t-rd-hld = <100>; - cavium,t-wr-hld = <70>; - cavium,t-pause = <0>; - cavium,t-wait = <0>; - cavium,t-page = <320>; - cavium,t-rd-dly = <0>; - - cavium,pages = <0>; - cavium,wait-mode; - cavium,bus-width = <16>; - }; - - flash0: nor@0,0 { - compatible = "cfi-flash"; - reg = <0 0 0x800000>; - #address-cells = <1>; - #size-cells = <1>; - }; - led0: led-display@4,0 { compatible = "avago,hdsp-253x"; reg = <4 0x20 0x20>, <4 0 0x20>; @@ -515,17 +338,6 @@ }; }; - dma0: dma-engine@1180000000100 { - compatible = "cavium,octeon-5750-bootbus-dma"; - reg = <0x11800 0x00000100 0x0 0x8>; - interrupts = <0 63>; - }; - dma1: dma-engine@1180000000108 { - compatible = "cavium,octeon-5750-bootbus-dma"; - reg = <0x11800 0x00000108 0x0 0x8>; - interrupts = <0 63>; - }; - uctl: uctl@118006f000000 { compatible = "cavium,octeon-6335-uctl"; reg = <0x11800 0x6f000000 0x0 0x100>; @@ -552,21 +364,10 @@ }; usbn: usbn@1180068000000 { - compatible = "cavium,octeon-5750-usbn"; - reg = <0x11800 0x68000000 0x0 0x1000>; - ranges; /* Direct mapping */ - #address-cells = <2>; - #size-cells = <2>; /* 12MHz, 24MHz and 48MHz allowed */ refclk-frequency = <12000000>; /* Either "crystal" or "external" */ refclk-type = "crystal"; - - usbc@16f0010000000 { - compatible = "cavium,octeon-5750-usbc"; - reg = <0x16f00 0x10000000 0x0 0x80000>; - interrupts = <0 56>; - }; }; }; diff --git a/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dtsi b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dtsi new file mode 100644 index 000000000..5302148e0 --- /dev/null +++ b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dtsi @@ -0,0 +1,231 @@ +/* OCTEON 3XXX DTS common parts. */ + +/dts-v1/; + +/ { + compatible = "cavium,octeon-3860"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&ciu>; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; /* Direct mapping */ + + ciu: interrupt-controller@1070000000000 { + compatible = "cavium,octeon-3860-ciu"; + interrupt-controller; + /* Interrupts are specified by two parts: + * 1) Controller register (0 or 1) + * 2) Bit within the register (0..63) + */ + #interrupt-cells = <2>; + reg = <0x10700 0x00000000 0x0 0x7000>; + }; + + gpio: gpio-controller@1070000000800 { + #gpio-cells = <2>; + compatible = "cavium,octeon-3860-gpio"; + reg = <0x10700 0x00000800 0x0 0x100>; + gpio-controller; + /* Interrupts are specified by two parts: + * 1) GPIO pin number (0..15) + * 2) Triggering (1 - edge rising + * 2 - edge falling + * 4 - level active high + * 8 - level active low) + */ + interrupt-controller; + #interrupt-cells = <2>; + /* The GPIO pin connect to 16 consecutive CUI bits */ + interrupts = <0 16>, <0 17>, <0 18>, <0 19>, + <0 20>, <0 21>, <0 22>, <0 23>, + <0 24>, <0 25>, <0 26>, <0 27>, + <0 28>, <0 29>, <0 30>, <0 31>; + }; + + smi0: mdio@1180000001800 { + compatible = "cavium,octeon-3860-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11800 0x00001800 0x0 0x40>; + }; + + pip: pip@11800a0000000 { + compatible = "cavium,octeon-3860-pip"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11800 0xa0000000 0x0 0x2000>; + + interface@0 { + compatible = "cavium,octeon-3860-pip-interface"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; /* interface */ + + ethernet@0 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x0>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + ethernet@1 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x1>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + ethernet@2 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x2>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + + interface@1 { + compatible = "cavium,octeon-3860-pip-interface"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; /* interface */ + }; + }; + + twsi0: i2c@1180000001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cavium,octeon-3860-twsi"; + reg = <0x11800 0x00001000 0x0 0x200>; + interrupts = <0 45>; + clock-frequency = <100000>; + }; + + uart0: serial@1180000000800 { + compatible = "cavium,octeon-3860-uart","ns16550"; + reg = <0x11800 0x00000800 0x0 0x400>; + clock-frequency = <0>; + current-speed = <115200>; + reg-shift = <3>; + interrupts = <0 34>; + }; + + bootbus: bootbus@1180000000000 { + compatible = "cavium,octeon-3860-bootbus"; + reg = <0x11800 0x00000000 0x0 0x200>; + /* The chip select number and offset */ + #address-cells = <2>; + /* The size of the chip select region */ + #size-cells = <1>; + ranges = <0 0 0x0 0x1f400000 0xc00000>, + <1 0 0x10000 0x30000000 0>, + <2 0 0x10000 0x40000000 0>, + <3 0 0x10000 0x50000000 0>, + <4 0 0x0 0x1d020000 0x10000>, + <5 0 0x0 0x1d040000 0x10000>, + <6 0 0x0 0x1d050000 0x10000>, + <7 0 0x10000 0x90000000 0>; + + cavium,cs-config@0 { + compatible = "cavium,octeon-3860-bootbus-config"; + cavium,cs-index = <0>; + cavium,t-adr = <20>; + cavium,t-ce = <60>; + cavium,t-oe = <60>; + cavium,t-we = <45>; + cavium,t-rd-hld = <35>; + cavium,t-wr-hld = <45>; + cavium,t-pause = <0>; + cavium,t-wait = <0>; + cavium,t-page = <35>; + cavium,t-rd-dly = <0>; + + cavium,pages = <0>; + cavium,bus-width = <8>; + }; + cavium,cs-config@4 { + compatible = "cavium,octeon-3860-bootbus-config"; + cavium,cs-index = <4>; + cavium,t-adr = <320>; + cavium,t-ce = <320>; + cavium,t-oe = <320>; + cavium,t-we = <320>; + cavium,t-rd-hld = <320>; + cavium,t-wr-hld = <320>; + cavium,t-pause = <320>; + cavium,t-wait = <320>; + cavium,t-page = <320>; + cavium,t-rd-dly = <0>; + + cavium,pages = <0>; + cavium,bus-width = <8>; + }; + cavium,cs-config@5 { + compatible = "cavium,octeon-3860-bootbus-config"; + cavium,cs-index = <5>; + cavium,t-adr = <5>; + cavium,t-ce = <300>; + cavium,t-oe = <125>; + cavium,t-we = <150>; + cavium,t-rd-hld = <100>; + cavium,t-wr-hld = <30>; + cavium,t-pause = <0>; + cavium,t-wait = <30>; + cavium,t-page = <320>; + cavium,t-rd-dly = <0>; + + cavium,pages = <0>; + cavium,bus-width = <16>; + }; + cavium,cs-config@6 { + compatible = "cavium,octeon-3860-bootbus-config"; + cavium,cs-index = <6>; + cavium,t-adr = <5>; + cavium,t-ce = <300>; + cavium,t-oe = <270>; + cavium,t-we = <150>; + cavium,t-rd-hld = <100>; + cavium,t-wr-hld = <70>; + cavium,t-pause = <0>; + cavium,t-wait = <0>; + cavium,t-page = <320>; + cavium,t-rd-dly = <0>; + + cavium,pages = <0>; + cavium,wait-mode; + cavium,bus-width = <16>; + }; + + flash0: nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + dma0: dma-engine@1180000000100 { + compatible = "cavium,octeon-5750-bootbus-dma"; + reg = <0x11800 0x00000100 0x0 0x8>; + interrupts = <0 63>; + }; + + dma1: dma-engine@1180000000108 { + compatible = "cavium,octeon-5750-bootbus-dma"; + reg = <0x11800 0x00000108 0x0 0x8>; + interrupts = <0 63>; + }; + + usbn: usbn@1180068000000 { + compatible = "cavium,octeon-5750-usbn"; + reg = <0x11800 0x68000000 0x0 0x1000>; + ranges; /* Direct mapping */ + #address-cells = <2>; + #size-cells = <2>; + + usbc@16f0010000000 { + compatible = "cavium,octeon-5750-usbc"; + reg = <0x16f00 0x10000000 0x0 0x80000>; + interrupts = <0 56>; + }; + }; + }; +}; diff --git a/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts b/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts new file mode 100644 index 000000000..243e5dc44 --- /dev/null +++ b/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts @@ -0,0 +1,59 @@ +/* + * Device tree source for EdgeRouter Lite. + * + * Written by: Aaro Koskinen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "octeon_3xxx.dtsi" + +/ { + model = "ubnt,e100"; + + soc@0 { + smi0: mdio@1180000001800 { + phy5: ethernet-phy@5 { + reg = <5>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + phy6: ethernet-phy@6 { + reg = <6>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + phy7: ethernet-phy@7 { + reg = <7>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + }; + + pip: pip@11800a0000000 { + interface@0 { + ethernet@0 { + phy-handle = <&phy7>; + }; + ethernet@1 { + phy-handle = <&phy6>; + }; + ethernet@2 { + phy-handle = <&phy5>; + }; + }; + }; + + uart0: serial@1180000000800 { + clock-frequency = <500000000>; + }; + + usbn: usbn@1180068000000 { + refclk-frequency = <12000000>; + refclk-type = "crystal"; + }; + }; + + aliases { + pip = &pip; + }; +}; diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi index 8b2437cd0..f6ae6ed9c 100644 --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi @@ -5,7 +5,7 @@ #size-cells = <1>; compatible = "ingenic,jz4740"; - cpuintc: interrupt-controller@0 { + cpuintc: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; @@ -65,4 +65,18 @@ clocks = <&ext>, <&cgu JZ4740_CLK_UART1>; clock-names = "baud", "module"; }; + + uhc: uhc@13030000 { + compatible = "ingenic,jz4740-ohci", "generic-ohci"; + reg = <0x13030000 0x1000>; + + clocks = <&cgu JZ4740_CLK_UHC>; + assigned-clocks = <&cgu JZ4740_CLK_UHC>; + assigned-clock-rates = <48000000>; + + interrupt-parent = <&intc>; + interrupts = <3>; + + status = "disabled"; + }; }; diff --git a/arch/mips/boot/dts/lantiq/easy50712.dts b/arch/mips/boot/dts/lantiq/easy50712.dts index 143b8a37b..b59962585 100644 --- a/arch/mips/boot/dts/lantiq/easy50712.dts +++ b/arch/mips/boot/dts/lantiq/easy50712.dts @@ -52,7 +52,7 @@ }; gpio: pinmux@E100B10 { - compatible = "lantiq,pinctrl-xway"; + compatible = "lantiq,danube-pinctrl"; pinctrl-names = "default"; pinctrl-0 = <&state_default>; diff --git a/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi b/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi deleted file mode 100644 index ef1335012..000000000 --- a/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi +++ /dev/null @@ -1,236 +0,0 @@ -/* - * Device Tree Source for PIC32MZDA clock data - * - * Purna Chandra Mandal - * Copyright (C) 2015 Microchip Technology Inc. All rights reserved. - * - * Licensed under GPLv2 or later. - */ - -/* all fixed rate clocks */ - -/ { - POSC:posc_clk { /* On-chip primary oscillator */ - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - }; - - FRC:frc_clk { /* internal FRC oscillator */ - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <8000000>; - }; - - BFRC:bfrc_clk { /* internal backup FRC oscillator */ - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <8000000>; - }; - - LPRC:lprc_clk { /* internal low-power FRC oscillator */ - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32000>; - }; - - /* UPLL provides clock to USBCORE */ - UPLL:usb_phy_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "usbphy_clk"; - }; - - TxCKI:txcki_clk { /* external clock input on TxCLKI pin */ - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <4000000>; - status = "disabled"; - }; - - /* external clock input on REFCLKIx pin */ - REFIx:refix_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - status = "disabled"; - }; - - /* PIC32 specific clks */ - pic32_clktree { - #address-cells = <1>; - #size-cells = <1>; - reg = <0x1f801200 0x200>; - compatible = "microchip,pic32mzda-clk"; - ranges = <0 0x1f801200 0x200>; - - /* secondary oscillator; external input on SOSCI pin */ - SOSC:sosc_clk@0 { - #clock-cells = <0>; - compatible = "microchip,pic32mzda-sosc"; - clock-frequency = <32768>; - reg = <0x000 0x10>, /* enable reg */ - <0x1d0 0x10>; /* status reg */ - microchip,bit-mask = <0x02>; /* enable mask */ - microchip,status-bit-mask = <0x10>; /* status-mask*/ - }; - - FRCDIV:frcdiv_clk { - #clock-cells = <0>; - compatible = "microchip,pic32mzda-frcdivclk"; - clocks = <&FRC>; - clock-output-names = "frcdiv_clk"; - }; - - /* System PLL clock */ - SYSPLL:spll_clk@020 { - #clock-cells = <0>; - compatible = "microchip,pic32mzda-syspll"; - reg = <0x020 0x10>, /* SPLL register */ - <0x1d0 0x10>; /* CLKSTAT register */ - clocks = <&POSC>, <&FRC>; - clock-output-names = "sys_pll"; - microchip,status-bit-mask = <0x80>; /* SPLLRDY */ - }; - - /* system clock; mux with postdiv & slew */ - SYSCLK:sys_clk@1c0 { - #clock-cells = <0>; - compatible = "microchip,pic32mzda-sysclk-v2"; - reg = <0x1c0 0x04>; /* SLEWCON */ - clocks = <&FRCDIV>, <&SYSPLL>, <&POSC>, <&SOSC>, - <&LPRC>, <&FRCDIV>; - microchip,clock-indices = <0>, <1>, <2>, <4>, - <5>, <7>; - clock-output-names = "sys_clk"; - }; - - /* Peripheral bus1 clock */ - PBCLK1:pb1_clk@140 { - reg = <0x140 0x10>; - #clock-cells = <0>; - compatible = "microchip,pic32mzda-pbclk"; - clocks = <&SYSCLK>; - clock-output-names = "pb1_clk"; - /* used by system modules, not gateable */ - microchip,ignore-unused; - }; - - /* Peripheral bus2 clock */ - PBCLK2:pb2_clk@150 { - reg = <0x150 0x10>; - #clock-cells = <0>; - compatible = "microchip,pic32mzda-pbclk"; - clocks = <&SYSCLK>; - clock-output-names = "pb2_clk"; - /* avoid gating even if unused */ - microchip,ignore-unused; - }; - - /* Peripheral bus3 clock */ - PBCLK3:pb3_clk@160 { - reg = <0x160 0x10>; - #clock-cells = <0>; - compatible = "microchip,pic32mzda-pbclk"; - clocks = <&SYSCLK>; - clock-output-names = "pb3_clk"; - }; - - /* Peripheral bus4 clock(I/O ports, GPIO) */ - PBCLK4:pb4_clk@170 { - reg = <0x170 0x10>; - #clock-cells = <0>; - compatible = "microchip,pic32mzda-pbclk"; - clocks = <&SYSCLK>; - clock-output-names = "pb4_clk"; - }; - - /* Peripheral bus clock */ - PBCLK5:pb5_clk@180 { - reg = <0x180 0x10>; - #clock-cells = <0>; - compatible = "microchip,pic32mzda-pbclk"; - clocks = <&SYSCLK>; - clock-output-names = "pb5_clk"; - }; - - /* Peripheral Bus6 clock; */ - PBCLK6:pb6_clk@190 { - reg = <0x190 0x10>; - compatible = "microchip,pic32mzda-pbclk"; - clocks = <&SYSCLK>; - #clock-cells = <0>; - }; - - /* Peripheral bus7 clock */ - PBCLK7:pb7_clk@1a0 { - reg = <0x1a0 0x10>; - #clock-cells = <0>; - compatible = "microchip,pic32mzda-pbclk"; - /* CPU is driven by this clock; so named */ - clock-output-names = "cpu_clk"; - clocks = <&SYSCLK>; - }; - - /* Reference Oscillator clock for SPI/I2S */ - REFCLKO1:refo1_clk@80 { - reg = <0x080 0x20>; - #clock-cells = <0>; - compatible = "microchip,pic32mzda-refoclk"; - clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>, - <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>; - microchip,clock-indices = <0>, <1>, <2>, <3>, <4>, - <5>, <7>, <8>, <9>; - clock-output-names = "refo1_clk"; - }; - - /* Reference Oscillator clock for SQI */ - REFCLKO2:refo2_clk@a0 { - reg = <0x0a0 0x20>; - #clock-cells = <0>; - compatible = "microchip,pic32mzda-refoclk"; - clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>, - <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>; - microchip,clock-indices = <0>, <1>, <2>, <3>, <4>, - <5>, <7>, <8>, <9>; - clock-output-names = "refo2_clk"; - }; - - /* Reference Oscillator clock, ADC */ - REFCLKO3:refo3_clk@c0 { - reg = <0x0c0 0x20>; - compatible = "microchip,pic32mzda-refoclk"; - clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>, - <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>; - microchip,clock-indices = <0>, <1>, <2>, <3>, <4>, - <5>, <7>, <8>, <9>; - #clock-cells = <0>; - clock-output-names = "refo3_clk"; - }; - - /* Reference Oscillator clock */ - REFCLKO4:refo4_clk@e0 { - reg = <0x0e0 0x20>; - compatible = "microchip,pic32mzda-refoclk"; - clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>, - <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>; - microchip,clock-indices = <0>, <1>, <2>, <3>, <4>, - <5>, <7>, <8>, <9>; - #clock-cells = <0>; - clock-output-names = "refo4_clk"; - }; - - /* Reference Oscillator clock, LCD */ - REFCLKO5:refo5_clk@100 { - reg = <0x100 0x20>; - compatible = "microchip,pic32mzda-refoclk"; - clocks = <&SYSCLK>,<&PBCLK1>,<&POSC>,<&FRC>,<&LPRC>, - <&SOSC>,<&SYSPLL>,<&REFIx>,<&BFRC>; - microchip,clock-indices = <0>, <1>, <2>, <3>, <4>, - <5>, <7>, <8>, <9>; - #clock-cells = <0>; - clock-output-names = "refo5_clk"; - }; - }; -}; diff --git a/arch/mips/boot/dts/pic32/pic32mzda.dtsi b/arch/mips/boot/dts/pic32/pic32mzda.dtsi index ad9e3318c..5353a639c 100644 --- a/arch/mips/boot/dts/pic32/pic32mzda.dtsi +++ b/arch/mips/boot/dts/pic32/pic32mzda.dtsi @@ -6,11 +6,9 @@ * published by the Free Software Foundation. * */ - +#include #include -#include "pic32mzda-clk.dtsi" - / { #address-cells = <1>; #size-cells = <1>; @@ -50,6 +48,29 @@ interrupts = <0 IRQ_TYPE_EDGE_RISING>; }; + /* external clock input on TxCLKI pin */ + txcki: txcki_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <4000000>; + status = "disabled"; + }; + + /* external input on REFCLKIx pin */ + refix: refix_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + status = "disabled"; + }; + + rootclk: clock-controller@1f801200 { + compatible = "microchip,pic32mzda-clk"; + reg = <0x1f801200 0x200>; + #clock-cells = <1>; + microchip,pic32mzda-sosc; + }; + evic: interrupt-controller@1f810000 { compatible = "microchip,pic32mzda-evic"; interrupt-controller; @@ -63,7 +84,7 @@ #size-cells = <1>; compatible = "microchip,pic32mzda-pinctrl"; reg = <0x1f801400 0x400>; - clocks = <&PBCLK1>; + clocks = <&rootclk PB1CLK>; }; /* PORTA */ @@ -75,7 +96,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&PBCLK4>; + clocks = <&rootclk PB4CLK>; microchip,gpio-bank = <0>; gpio-ranges = <&pic32_pinctrl 0 0 16>; }; @@ -89,7 +110,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&PBCLK4>; + clocks = <&rootclk PB4CLK>; microchip,gpio-bank = <1>; gpio-ranges = <&pic32_pinctrl 0 16 16>; }; @@ -103,7 +124,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&PBCLK4>; + clocks = <&rootclk PB4CLK>; microchip,gpio-bank = <2>; gpio-ranges = <&pic32_pinctrl 0 32 16>; }; @@ -117,7 +138,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&PBCLK4>; + clocks = <&rootclk PB4CLK>; microchip,gpio-bank = <3>; gpio-ranges = <&pic32_pinctrl 0 48 16>; }; @@ -131,7 +152,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&PBCLK4>; + clocks = <&rootclk PB4CLK>; microchip,gpio-bank = <4>; gpio-ranges = <&pic32_pinctrl 0 64 16>; }; @@ -145,7 +166,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&PBCLK4>; + clocks = <&rootclk PB4CLK>; microchip,gpio-bank = <5>; gpio-ranges = <&pic32_pinctrl 0 80 16>; }; @@ -159,7 +180,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&PBCLK4>; + clocks = <&rootclk PB4CLK>; microchip,gpio-bank = <6>; gpio-ranges = <&pic32_pinctrl 0 96 16>; }; @@ -173,7 +194,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&PBCLK4>; + clocks = <&rootclk PB4CLK>; microchip,gpio-bank = <7>; gpio-ranges = <&pic32_pinctrl 0 112 16>; }; @@ -189,7 +210,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&PBCLK4>; + clocks = <&rootclk PB4CLK>; microchip,gpio-bank = <8>; gpio-ranges = <&pic32_pinctrl 0 128 16>; }; @@ -203,7 +224,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&PBCLK4>; + clocks = <&rootclk PB4CLK>; microchip,gpio-bank = <9>; gpio-ranges = <&pic32_pinctrl 0 144 16>; }; @@ -212,7 +233,7 @@ compatible = "microchip,pic32mzda-sdhci"; reg = <0x1f8ec000 0x100>; interrupts = <191 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&REFCLKO4>, <&PBCLK5>; + clocks = <&rootclk REF4CLK>, <&rootclk PB5CLK>; clock-names = "base_clk", "sys_clk"; bus-width = <4>; cap-sd-highspeed; @@ -225,7 +246,7 @@ interrupts = <112 IRQ_TYPE_LEVEL_HIGH>, <113 IRQ_TYPE_LEVEL_HIGH>, <114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&PBCLK2>; + clocks = <&rootclk PB2CLK>; status = "disabled"; }; @@ -235,7 +256,7 @@ interrupts = <145 IRQ_TYPE_LEVEL_HIGH>, <146 IRQ_TYPE_LEVEL_HIGH>, <147 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&PBCLK2>; + clocks = <&rootclk PB2CLK>; status = "disabled"; }; @@ -245,7 +266,7 @@ interrupts = <157 IRQ_TYPE_LEVEL_HIGH>, <158 IRQ_TYPE_LEVEL_HIGH>, <159 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&PBCLK2>; + clocks = <&rootclk PB2CLK>; status = "disabled"; }; @@ -255,7 +276,7 @@ interrupts = <170 IRQ_TYPE_LEVEL_HIGH>, <171 IRQ_TYPE_LEVEL_HIGH>, <172 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&PBCLK2>; + clocks = <&rootclk PB2CLK>; status = "disabled"; }; @@ -265,7 +286,7 @@ interrupts = <179 IRQ_TYPE_LEVEL_HIGH>, <180 IRQ_TYPE_LEVEL_HIGH>, <181 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&PBCLK2>; + clocks = <&rootclk PB2CLK>; status = "disabled"; }; @@ -275,7 +296,7 @@ interrupts = <188 IRQ_TYPE_LEVEL_HIGH>, <189 IRQ_TYPE_LEVEL_HIGH>, <190 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&PBCLK2>; + clocks = <&rootclk PB2CLK>; status = "disabled"; }; }; diff --git a/arch/mips/boot/dts/pic32/pic32mzda_sk.dts b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts index 5d434a50e..fc7401028 100644 --- a/arch/mips/boot/dts/pic32/pic32mzda_sk.dts +++ b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts @@ -95,8 +95,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdhc1>; status = "okay"; - assigned-clocks = <&REFCLKO2>,<&REFCLKO4>,<&REFCLKO5>; - assigned-clock-rates = <50000000>,<25000000>,<40000000>; + assigned-clocks = <&rootclk REF2CLK>, <&rootclk REF4CLK>, + <&rootclk REF5CLK>; + assigned-clock-rates = <50000000>, <25000000>, <40000000>; }; &pic32_pinctrl { diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile index 2d61455d5..63a9ddf04 100644 --- a/arch/mips/boot/dts/qca/Makefile +++ b/arch/mips/boot/dts/qca/Makefile @@ -1,8 +1,9 @@ # All DTBs dtb-$(CONFIG_ATH79) += ar9132_tl_wr1043nd_v1.dtb - -# Select a DTB to build in the kernel -obj-$(CONFIG_DTB_TL_WR1043ND_V1) += ar9132_tl_wr1043nd_v1.dtb.o +dtb-$(CONFIG_ATH79) += ar9331_dpt_module.dtb +dtb-$(CONFIG_ATH79) += ar9331_dragino_ms14.dtb +dtb-$(CONFIG_ATH79) += ar9331_omega.dtb +dtb-$(CONFIG_ATH79) += ar9331_tl_mr3020.dtb # Force kbuild to make empty built-in.o if necessary obj- += dummy.o diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi index 3c2ed9ee5..302f0a8d2 100644 --- a/arch/mips/boot/dts/qca/ar9132.dtsi +++ b/arch/mips/boot/dts/qca/ar9132.dtsi @@ -1,3 +1,5 @@ +#include + / { compatible = "qca,ar9132"; @@ -11,6 +13,7 @@ cpu@0 { device_type = "cpu"; compatible = "mips,mips24Kc"; + clocks = <&pll ATH79_CLK_CPU>; reg = <0>; }; }; @@ -52,12 +55,12 @@ #qca,ddr-wb-channel-cells = <1>; }; - uart@18020000 { + uart: uart@18020000 { compatible = "ns8250"; reg = <0x18020000 0x20>; interrupts = <3>; - clocks = <&pll 2>; + clocks = <&pll ATH79_CLK_AHB>; clock-names = "uart"; reg-io-width = <4>; @@ -94,13 +97,13 @@ clock-output-names = "cpu", "ddr", "ahb"; }; - wdt@18060008 { + wdt: wdt@18060008 { compatible = "qca,ar7130-wdt"; reg = <0x18060008 0x8>; interrupts = <4>; - clocks = <&pll 2>; + clocks = <&pll ATH79_CLK_AHB>; clock-names = "wdt"; }; @@ -125,7 +128,7 @@ }; }; - usb@1b000100 { + usb: usb@1b000100 { compatible = "qca,ar7100-ehci", "generic-ehci"; reg = <0x1b000100 0x100>; @@ -140,11 +143,11 @@ status = "disabled"; }; - spi@1f000000 { + spi: spi@1f000000 { compatible = "qca,ar9132-spi", "qca,ar7100-spi"; reg = <0x1f000000 0x10>; - clocks = <&pll 2>; + clocks = <&pll ATH79_CLK_AHB>; clock-names = "ahb"; status = "disabled"; diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts index 4f1540e5f..3c3b7ce57 100644 --- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts +++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts @@ -9,10 +9,6 @@ compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132"; model = "TP-Link TL-WR1043ND Version 1"; - alias { - serial0 = "/ahb/apb/uart@18020000"; - }; - memory@0 { device_type = "memory"; reg = <0x0 0x2000000>; @@ -24,55 +20,6 @@ clock-frequency = <40000000>; }; - ahb { - apb { - uart@18020000 { - status = "okay"; - }; - - pll-controller@18050000 { - clocks = <&extosc>; - }; - }; - - usb@1b000100 { - status = "okay"; - }; - - spi@1f000000 { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "s25sl064a"; - reg = <0>; - spi-max-frequency = <25000000>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x020000>; - }; - - partition@1 { - label = "firmware"; - reg = <0x020000 0x7D0000>; - }; - - partition@2 { - label = "art"; - reg = <0x7F0000 0x010000>; - read-only; - }; - }; - }; - }; - - usb-phy { - status = "okay"; - }; - gpio-keys { compatible = "gpio-keys-polled"; #address-cells = <1>; @@ -118,3 +65,48 @@ }; }; }; + +&uart { + status = "okay"; +}; + +&pll { + clocks = <&extosc>; +}; + +&usb { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "s25sl064a"; + reg = <0>; + spi-max-frequency = <25000000>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + }; + + partition@1 { + label = "firmware"; + reg = <0x020000 0x7D0000>; + }; + + partition@2 { + label = "art"; + reg = <0x7F0000 0x010000>; + read-only; + }; + }; +}; diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi new file mode 100644 index 000000000..cf47ed4d8 --- /dev/null +++ b/arch/mips/boot/dts/qca/ar9331.dtsi @@ -0,0 +1,155 @@ +#include + +/ { + compatible = "qca,ar9331"; + + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "mips,mips24Kc"; + clocks = <&pll ATH79_CLK_CPU>; + reg = <0>; + }; + }; + + cpuintc: interrupt-controller { + compatible = "qca,ar7100-cpu-intc"; + + interrupt-controller; + #interrupt-cells = <1>; + + qca,ddr-wb-channel-interrupts = <2>, <3>; + qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>; + }; + + ref: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + ahb { + compatible = "simple-bus"; + ranges; + + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&cpuintc>; + + apb { + compatible = "simple-bus"; + ranges; + + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&miscintc>; + + ddr_ctrl: memory-controller@18000000 { + compatible = "qca,ar7240-ddr-controller"; + reg = <0x18000000 0x100>; + + #qca,ddr-wb-channel-cells = <1>; + }; + + uart: uart@18020000 { + compatible = "qca,ar9330-uart"; + reg = <0x18020000 0x14>; + + interrupts = <3>; + + clocks = <&ref>; + clock-names = "uart"; + + status = "disabled"; + }; + + gpio: gpio@18040000 { + compatible = "qca,ar7100-gpio"; + reg = <0x18040000 0x34>; + interrupts = <2>; + + ngpios = <30>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + status = "disabled"; + }; + + pll: pll-controller@18050000 { + compatible = "qca,ar9330-pll"; + reg = <0x18050000 0x100>; + + clocks = <&ref>; + clock-names = "ref"; + + #clock-cells = <1>; + }; + + miscintc: interrupt-controller@18060010 { + compatible = "qca,ar7240-misc-intc"; + reg = <0x18060010 0x4>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + rst: reset-controller@1806001c { + compatible = "qca,ar7100-reset"; + reg = <0x1806001c 0x4>; + + #reset-cells = <1>; + }; + }; + + usb: usb@1b000100 { + compatible = "chipidea,usb2"; + reg = <0x1b000000 0x200>; + + interrupts = <3>; + resets = <&rst 5>; + + phy-names = "usb-phy"; + phys = <&usb_phy>; + + status = "disabled"; + }; + + spi: spi@1f000000 { + compatible = "qca,ar7100-spi"; + reg = <0x1f000000 0x10>; + + clocks = <&pll ATH79_CLK_AHB>; + clock-names = "ahb"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + usb_phy: usb-phy { + compatible = "qca,ar7100-usb-phy"; + + reset-names = "usb-phy", "usb-suspend-override"; + resets = <&rst 4>, <&rst 3>; + + #phy-cells = <0>; + + status = "disabled"; + }; +}; diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts new file mode 100644 index 000000000..98e74500e --- /dev/null +++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts @@ -0,0 +1,78 @@ +/dts-v1/; + +#include +#include + +#include "ar9331.dtsi" + +/ { + model = "DPTechnics DPT-Module"; + compatible = "dptechnics,dpt-module"; + + aliases { + serial0 = &uart; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + leds { + compatible = "gpio-leds"; + + system { + label = "dpt-module:green:system"; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "reset"; + linux,code = ; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ref { + clock-frequency = <25000000>; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&usb { + dr_mode = "host"; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&spi { + num-chipselects = <1>; + status = "okay"; + + /* Winbond 25Q128FVSG SPI flash */ + spiflash: w25q128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128", "jedec,spi-nor"; + spi-max-frequency = <104000000>; + reg = <0>; + }; +}; diff --git a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts new file mode 100644 index 000000000..56f832076 --- /dev/null +++ b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts @@ -0,0 +1,102 @@ +/dts-v1/; + +#include +#include + +#include "ar9331.dtsi" + +/ { + model = "Dragino MS14 (Dragino 2)"; + compatible = "dragino,ms14"; + + aliases { + serial0 = &uart; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + leds { + compatible = "gpio-leds"; + + wlan { + label = "dragino2:red:wlan"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + lan { + label = "dragino2:red:lan"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + wan { + label = "dragino2:red:wan"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + system { + label = "dragino2:red:system"; + gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "jumpstart"; + linux,code = ; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + button@1 { + label = "reset"; + linux,code = ; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ref { + clock-frequency = <25000000>; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&usb { + dr_mode = "host"; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&spi { + num-chipselects = <1>; + status = "okay"; + + /* Winbond 25Q128BVFG SPI flash */ + spiflash: w25q128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128", "jedec,spi-nor"; + spi-max-frequency = <104000000>; + reg = <0>; + }; +}; diff --git a/arch/mips/boot/dts/qca/ar9331_omega.dts b/arch/mips/boot/dts/qca/ar9331_omega.dts new file mode 100644 index 000000000..b2be3b044 --- /dev/null +++ b/arch/mips/boot/dts/qca/ar9331_omega.dts @@ -0,0 +1,78 @@ +/dts-v1/; + +#include +#include + +#include "ar9331.dtsi" + +/ { + model = "Onion Omega"; + compatible = "onion,omega"; + + aliases { + serial0 = &uart; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + leds { + compatible = "gpio-leds"; + + system { + label = "onion:amber:system"; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "reset"; + linux,code = ; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&ref { + clock-frequency = <25000000>; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&usb { + dr_mode = "host"; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&spi { + num-chipselects = <1>; + status = "okay"; + + /* Winbond 25Q128FVSG SPI flash */ + spiflash: w25q128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128", "jedec,spi-nor"; + spi-max-frequency = <104000000>; + reg = <0>; + }; +}; diff --git a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts new file mode 100644 index 000000000..919cf3b85 --- /dev/null +++ b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts @@ -0,0 +1,118 @@ +/dts-v1/; + +#include +#include + +#include "ar9331.dtsi" + +/ { + model = "TP-Link TL-MR3020"; + compatible = "tplink,tl-mr3020"; + + aliases { + serial0 = &uart; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + leds { + compatible = "gpio-leds"; + + wlan { + label = "tp-link:green:wlan"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + lan { + label = "tp-link:green:lan"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + wps { + label = "tp-link:green:wps"; + gpios = <&gpio 26 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3g { + label = "tp-link:green:3g"; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "wps"; + linux,code = ; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + }; + + button@1 { + label = "sw1"; + linux,code = ; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + }; + + button@2 { + label = "sw2"; + linux,code = ; + gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_usb_vbus: reg_usb_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&ref { + clock-frequency = <25000000>; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&usb { + dr_mode = "host"; + vbus-supply = <®_usb_vbus>; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&spi { + num-chipselects = <1>; + status = "okay"; + + /* Spansion S25FL032PIF SPI flash */ + spiflash: s25sl032p@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl032p", "jedec,spi-nor"; + spi-max-frequency = <104000000>; + reg = <0>; + }; +}; diff --git a/arch/mips/boot/dts/ralink/mt7620a.dtsi b/arch/mips/boot/dts/ralink/mt7620a.dtsi index 08bf24fef..793c0c7ca 100644 --- a/arch/mips/boot/dts/ralink/mt7620a.dtsi +++ b/arch/mips/boot/dts/ralink/mt7620a.dtsi @@ -9,7 +9,7 @@ }; }; - cpuintc: cpuintc@0 { + cpuintc: cpuintc { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/mips/boot/dts/ralink/rt2880.dtsi b/arch/mips/boot/dts/ralink/rt2880.dtsi index 182afde2f..fb2faef0a 100644 --- a/arch/mips/boot/dts/ralink/rt2880.dtsi +++ b/arch/mips/boot/dts/ralink/rt2880.dtsi @@ -9,7 +9,7 @@ }; }; - cpuintc: cpuintc@0 { + cpuintc: cpuintc { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/mips/boot/dts/ralink/rt3050.dtsi b/arch/mips/boot/dts/ralink/rt3050.dtsi index e3203d414..d3cb57f98 100644 --- a/arch/mips/boot/dts/ralink/rt3050.dtsi +++ b/arch/mips/boot/dts/ralink/rt3050.dtsi @@ -9,7 +9,7 @@ }; }; - cpuintc: cpuintc@0 { + cpuintc: cpuintc { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/mips/boot/dts/ralink/rt3883.dtsi b/arch/mips/boot/dts/ralink/rt3883.dtsi index 3b131dd0d..3d6fc9afd 100644 --- a/arch/mips/boot/dts/ralink/rt3883.dtsi +++ b/arch/mips/boot/dts/ralink/rt3883.dtsi @@ -9,7 +9,7 @@ }; }; - cpuintc: cpuintc@0 { + cpuintc: cpuintc { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts index 686ebd113..48d21127c 100644 --- a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts +++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts @@ -10,7 +10,7 @@ reg = <0x0 0x08000000>; }; - cpuintc: interrupt-controller@0 { + cpuintc: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/mips/boot/tools/.gitignore b/arch/mips/boot/tools/.gitignore new file mode 100644 index 000000000..be0ed0652 --- /dev/null +++ b/arch/mips/boot/tools/.gitignore @@ -0,0 +1 @@ +relocs diff --git a/arch/mips/boot/tools/Makefile b/arch/mips/boot/tools/Makefile new file mode 100644 index 000000000..d232a68f6 --- /dev/null +++ b/arch/mips/boot/tools/Makefile @@ -0,0 +1,8 @@ + +hostprogs-y += relocs +relocs-objs += relocs_32.o +relocs-objs += relocs_64.o +relocs-objs += relocs_main.o +PHONY += relocs +relocs: $(obj)/relocs + @: diff --git a/arch/mips/boot/tools/relocs.c b/arch/mips/boot/tools/relocs.c new file mode 100644 index 000000000..b9cbf7852 --- /dev/null +++ b/arch/mips/boot/tools/relocs.c @@ -0,0 +1,680 @@ +/* This is included from relocs_32/64.c */ + +#define ElfW(type) _ElfW(ELF_BITS, type) +#define _ElfW(bits, type) __ElfW(bits, type) +#define __ElfW(bits, type) Elf##bits##_##type + +#define Elf_Addr ElfW(Addr) +#define Elf_Ehdr ElfW(Ehdr) +#define Elf_Phdr ElfW(Phdr) +#define Elf_Shdr ElfW(Shdr) +#define Elf_Sym ElfW(Sym) + +static Elf_Ehdr ehdr; + +struct relocs { + uint32_t *offset; + unsigned long count; + unsigned long size; +}; + +static struct relocs relocs; + +struct section { + Elf_Shdr shdr; + struct section *link; + Elf_Sym *symtab; + Elf_Rel *reltab; + char *strtab; + long shdr_offset; +}; +static struct section *secs; + +static const char * const regex_sym_kernel = { +/* Symbols matching these regex's should never be relocated */ + "^(__crc_)", +}; + +static regex_t sym_regex_c; + +static int regex_skip_reloc(const char *sym_name) +{ + return !regexec(&sym_regex_c, sym_name, 0, NULL, 0); +} + +static void regex_init(void) +{ + char errbuf[128]; + int err; + + err = regcomp(&sym_regex_c, regex_sym_kernel, + REG_EXTENDED|REG_NOSUB); + + if (err) { + regerror(err, &sym_regex_c, errbuf, sizeof(errbuf)); + die("%s", errbuf); + } +} + +static const char *rel_type(unsigned type) +{ + static const char * const type_name[] = { +#define REL_TYPE(X)[X] = #X + REL_TYPE(R_MIPS_NONE), + REL_TYPE(R_MIPS_16), + REL_TYPE(R_MIPS_32), + REL_TYPE(R_MIPS_REL32), + REL_TYPE(R_MIPS_26), + REL_TYPE(R_MIPS_HI16), + REL_TYPE(R_MIPS_LO16), + REL_TYPE(R_MIPS_GPREL16), + REL_TYPE(R_MIPS_LITERAL), + REL_TYPE(R_MIPS_GOT16), + REL_TYPE(R_MIPS_PC16), + REL_TYPE(R_MIPS_CALL16), + REL_TYPE(R_MIPS_GPREL32), + REL_TYPE(R_MIPS_64), + REL_TYPE(R_MIPS_HIGHER), + REL_TYPE(R_MIPS_HIGHEST), + REL_TYPE(R_MIPS_PC21_S2), + REL_TYPE(R_MIPS_PC26_S2), +#undef REL_TYPE + }; + const char *name = "unknown type rel type name"; + + if (type < ARRAY_SIZE(type_name) && type_name[type]) + name = type_name[type]; + return name; +} + +static const char *sec_name(unsigned shndx) +{ + const char *sec_strtab; + const char *name; + + sec_strtab = secs[ehdr.e_shstrndx].strtab; + if (shndx < ehdr.e_shnum) + name = sec_strtab + secs[shndx].shdr.sh_name; + else if (shndx == SHN_ABS) + name = "ABSOLUTE"; + else if (shndx == SHN_COMMON) + name = "COMMON"; + else + name = ""; + return name; +} + +static struct section *sec_lookup(const char *secname) +{ + int i; + + for (i = 0; i < ehdr.e_shnum; i++) + if (strcmp(secname, sec_name(i)) == 0) + return &secs[i]; + + return NULL; +} + +static const char *sym_name(const char *sym_strtab, Elf_Sym *sym) +{ + const char *name; + + if (sym->st_name) + name = sym_strtab + sym->st_name; + else + name = sec_name(sym->st_shndx); + return name; +} + +#if BYTE_ORDER == LITTLE_ENDIAN +#define le16_to_cpu(val) (val) +#define le32_to_cpu(val) (val) +#define le64_to_cpu(val) (val) +#define be16_to_cpu(val) bswap_16(val) +#define be32_to_cpu(val) bswap_32(val) +#define be64_to_cpu(val) bswap_64(val) + +#define cpu_to_le16(val) (val) +#define cpu_to_le32(val) (val) +#define cpu_to_le64(val) (val) +#define cpu_to_be16(val) bswap_16(val) +#define cpu_to_be32(val) bswap_32(val) +#define cpu_to_be64(val) bswap_64(val) +#endif +#if BYTE_ORDER == BIG_ENDIAN +#define le16_to_cpu(val) bswap_16(val) +#define le32_to_cpu(val) bswap_32(val) +#define le64_to_cpu(val) bswap_64(val) +#define be16_to_cpu(val) (val) +#define be32_to_cpu(val) (val) +#define be64_to_cpu(val) (val) + +#define cpu_to_le16(val) bswap_16(val) +#define cpu_to_le32(val) bswap_32(val) +#define cpu_to_le64(val) bswap_64(val) +#define cpu_to_be16(val) (val) +#define cpu_to_be32(val) (val) +#define cpu_to_be64(val) (val) +#endif + +static uint16_t elf16_to_cpu(uint16_t val) +{ + if (ehdr.e_ident[EI_DATA] == ELFDATA2LSB) + return le16_to_cpu(val); + else + return be16_to_cpu(val); +} + +static uint32_t elf32_to_cpu(uint32_t val) +{ + if (ehdr.e_ident[EI_DATA] == ELFDATA2LSB) + return le32_to_cpu(val); + else + return be32_to_cpu(val); +} + +static uint32_t cpu_to_elf32(uint32_t val) +{ + if (ehdr.e_ident[EI_DATA] == ELFDATA2LSB) + return cpu_to_le32(val); + else + return cpu_to_be32(val); +} + +#define elf_half_to_cpu(x) elf16_to_cpu(x) +#define elf_word_to_cpu(x) elf32_to_cpu(x) + +#if ELF_BITS == 64 +static uint64_t elf64_to_cpu(uint64_t val) +{ + if (ehdr.e_ident[EI_DATA] == ELFDATA2LSB) + return le64_to_cpu(val); + else + return be64_to_cpu(val); +} +#define elf_addr_to_cpu(x) elf64_to_cpu(x) +#define elf_off_to_cpu(x) elf64_to_cpu(x) +#define elf_xword_to_cpu(x) elf64_to_cpu(x) +#else +#define elf_addr_to_cpu(x) elf32_to_cpu(x) +#define elf_off_to_cpu(x) elf32_to_cpu(x) +#define elf_xword_to_cpu(x) elf32_to_cpu(x) +#endif + +static void read_ehdr(FILE *fp) +{ + if (fread(&ehdr, sizeof(ehdr), 1, fp) != 1) + die("Cannot read ELF header: %s\n", strerror(errno)); + + if (memcmp(ehdr.e_ident, ELFMAG, SELFMAG) != 0) + die("No ELF magic\n"); + + if (ehdr.e_ident[EI_CLASS] != ELF_CLASS) + die("Not a %d bit executable\n", ELF_BITS); + + if ((ehdr.e_ident[EI_DATA] != ELFDATA2LSB) && + (ehdr.e_ident[EI_DATA] != ELFDATA2MSB)) + die("Unknown ELF Endianness\n"); + + if (ehdr.e_ident[EI_VERSION] != EV_CURRENT) + die("Unknown ELF version\n"); + + /* Convert the fields to native endian */ + ehdr.e_type = elf_half_to_cpu(ehdr.e_type); + ehdr.e_machine = elf_half_to_cpu(ehdr.e_machine); + ehdr.e_version = elf_word_to_cpu(ehdr.e_version); + ehdr.e_entry = elf_addr_to_cpu(ehdr.e_entry); + ehdr.e_phoff = elf_off_to_cpu(ehdr.e_phoff); + ehdr.e_shoff = elf_off_to_cpu(ehdr.e_shoff); + ehdr.e_flags = elf_word_to_cpu(ehdr.e_flags); + ehdr.e_ehsize = elf_half_to_cpu(ehdr.e_ehsize); + ehdr.e_phentsize = elf_half_to_cpu(ehdr.e_phentsize); + ehdr.e_phnum = elf_half_to_cpu(ehdr.e_phnum); + ehdr.e_shentsize = elf_half_to_cpu(ehdr.e_shentsize); + ehdr.e_shnum = elf_half_to_cpu(ehdr.e_shnum); + ehdr.e_shstrndx = elf_half_to_cpu(ehdr.e_shstrndx); + + if ((ehdr.e_type != ET_EXEC) && (ehdr.e_type != ET_DYN)) + die("Unsupported ELF header type\n"); + + if (ehdr.e_machine != ELF_MACHINE) + die("Not for %s\n", ELF_MACHINE_NAME); + + if (ehdr.e_version != EV_CURRENT) + die("Unknown ELF version\n"); + + if (ehdr.e_ehsize != sizeof(Elf_Ehdr)) + die("Bad Elf header size\n"); + + if (ehdr.e_phentsize != sizeof(Elf_Phdr)) + die("Bad program header entry\n"); + + if (ehdr.e_shentsize != sizeof(Elf_Shdr)) + die("Bad section header entry\n"); + + if (ehdr.e_shstrndx >= ehdr.e_shnum) + die("String table index out of bounds\n"); +} + +static void read_shdrs(FILE *fp) +{ + int i; + Elf_Shdr shdr; + + secs = calloc(ehdr.e_shnum, sizeof(struct section)); + if (!secs) + die("Unable to allocate %d section headers\n", ehdr.e_shnum); + + if (fseek(fp, ehdr.e_shoff, SEEK_SET) < 0) + die("Seek to %d failed: %s\n", ehdr.e_shoff, strerror(errno)); + + for (i = 0; i < ehdr.e_shnum; i++) { + struct section *sec = &secs[i]; + + sec->shdr_offset = ftell(fp); + if (fread(&shdr, sizeof(shdr), 1, fp) != 1) + die("Cannot read ELF section headers %d/%d: %s\n", + i, ehdr.e_shnum, strerror(errno)); + sec->shdr.sh_name = elf_word_to_cpu(shdr.sh_name); + sec->shdr.sh_type = elf_word_to_cpu(shdr.sh_type); + sec->shdr.sh_flags = elf_xword_to_cpu(shdr.sh_flags); + sec->shdr.sh_addr = elf_addr_to_cpu(shdr.sh_addr); + sec->shdr.sh_offset = elf_off_to_cpu(shdr.sh_offset); + sec->shdr.sh_size = elf_xword_to_cpu(shdr.sh_size); + sec->shdr.sh_link = elf_word_to_cpu(shdr.sh_link); + sec->shdr.sh_info = elf_word_to_cpu(shdr.sh_info); + sec->shdr.sh_addralign = elf_xword_to_cpu(shdr.sh_addralign); + sec->shdr.sh_entsize = elf_xword_to_cpu(shdr.sh_entsize); + if (sec->shdr.sh_link < ehdr.e_shnum) + sec->link = &secs[sec->shdr.sh_link]; + } +} + +static void read_strtabs(FILE *fp) +{ + int i; + + for (i = 0; i < ehdr.e_shnum; i++) { + struct section *sec = &secs[i]; + + if (sec->shdr.sh_type != SHT_STRTAB) + continue; + + sec->strtab = malloc(sec->shdr.sh_size); + if (!sec->strtab) + die("malloc of %d bytes for strtab failed\n", + sec->shdr.sh_size); + + if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) + die("Seek to %d failed: %s\n", + sec->shdr.sh_offset, strerror(errno)); + + if (fread(sec->strtab, 1, sec->shdr.sh_size, fp) != + sec->shdr.sh_size) + die("Cannot read symbol table: %s\n", strerror(errno)); + } +} + +static void read_symtabs(FILE *fp) +{ + int i, j; + + for (i = 0; i < ehdr.e_shnum; i++) { + struct section *sec = &secs[i]; + if (sec->shdr.sh_type != SHT_SYMTAB) + continue; + + sec->symtab = malloc(sec->shdr.sh_size); + if (!sec->symtab) + die("malloc of %d bytes for symtab failed\n", + sec->shdr.sh_size); + + if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) + die("Seek to %d failed: %s\n", + sec->shdr.sh_offset, strerror(errno)); + + if (fread(sec->symtab, 1, sec->shdr.sh_size, fp) != + sec->shdr.sh_size) + die("Cannot read symbol table: %s\n", strerror(errno)); + + for (j = 0; j < sec->shdr.sh_size/sizeof(Elf_Sym); j++) { + Elf_Sym *sym = &sec->symtab[j]; + + sym->st_name = elf_word_to_cpu(sym->st_name); + sym->st_value = elf_addr_to_cpu(sym->st_value); + sym->st_size = elf_xword_to_cpu(sym->st_size); + sym->st_shndx = elf_half_to_cpu(sym->st_shndx); + } + } +} + +static void read_relocs(FILE *fp) +{ + static unsigned long base = 0; + int i, j; + + if (!base) { + struct section *sec = sec_lookup(".text"); + + if (!sec) + die("Could not find .text section\n"); + + base = sec->shdr.sh_addr; + } + + for (i = 0; i < ehdr.e_shnum; i++) { + struct section *sec = &secs[i]; + + if (sec->shdr.sh_type != SHT_REL_TYPE) + continue; + + sec->reltab = malloc(sec->shdr.sh_size); + if (!sec->reltab) + die("malloc of %d bytes for relocs failed\n", + sec->shdr.sh_size); + + if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) + die("Seek to %d failed: %s\n", + sec->shdr.sh_offset, strerror(errno)); + + if (fread(sec->reltab, 1, sec->shdr.sh_size, fp) != + sec->shdr.sh_size) + die("Cannot read symbol table: %s\n", strerror(errno)); + + for (j = 0; j < sec->shdr.sh_size/sizeof(Elf_Rel); j++) { + Elf_Rel *rel = &sec->reltab[j]; + + rel->r_offset = elf_addr_to_cpu(rel->r_offset); + /* Set offset into kernel image */ + rel->r_offset -= base; +#if (ELF_BITS == 32) + rel->r_info = elf_xword_to_cpu(rel->r_info); +#else + /* Convert MIPS64 RELA format - only the symbol + * index needs converting to native endianness + */ + rel->r_info = rel->r_info; + ELF_R_SYM(rel->r_info) = elf32_to_cpu(ELF_R_SYM(rel->r_info)); +#endif +#if (SHT_REL_TYPE == SHT_RELA) + rel->r_addend = elf_xword_to_cpu(rel->r_addend); +#endif + } + } +} + +static void remove_relocs(FILE *fp) +{ + int i; + Elf_Shdr shdr; + + for (i = 0; i < ehdr.e_shnum; i++) { + struct section *sec = &secs[i]; + + if (sec->shdr.sh_type != SHT_REL_TYPE) + continue; + + if (fseek(fp, sec->shdr_offset, SEEK_SET) < 0) + die("Seek to %d failed: %s\n", + sec->shdr_offset, strerror(errno)); + + if (fread(&shdr, sizeof(shdr), 1, fp) != 1) + die("Cannot read ELF section headers %d/%d: %s\n", + i, ehdr.e_shnum, strerror(errno)); + + /* Set relocation section size to 0, effectively removing it. + * This is necessary due to lack of support for relocations + * in objcopy when creating 32bit elf from 64bit elf. + */ + shdr.sh_size = 0; + + if (fseek(fp, sec->shdr_offset, SEEK_SET) < 0) + die("Seek to %d failed: %s\n", + sec->shdr_offset, strerror(errno)); + + if (fwrite(&shdr, sizeof(shdr), 1, fp) != 1) + die("Cannot write ELF section headers %d/%d: %s\n", + i, ehdr.e_shnum, strerror(errno)); + } +} + +static void add_reloc(struct relocs *r, uint32_t offset, unsigned type) +{ + /* Relocation representation in binary table: + * |76543210|76543210|76543210|76543210| + * | Type | offset from _text >> 2 | + */ + offset >>= 2; + if (offset > 0x00FFFFFF) + die("Kernel image exceeds maximum size for relocation!\n"); + + offset = (offset & 0x00FFFFFF) | ((type & 0xFF) << 24); + + if (r->count == r->size) { + unsigned long newsize = r->size + 50000; + void *mem = realloc(r->offset, newsize * sizeof(r->offset[0])); + + if (!mem) + die("realloc failed\n"); + + r->offset = mem; + r->size = newsize; + } + r->offset[r->count++] = offset; +} + +static void walk_relocs(int (*process)(struct section *sec, Elf_Rel *rel, + Elf_Sym *sym, const char *symname)) +{ + int i; + + /* Walk through the relocations */ + for (i = 0; i < ehdr.e_shnum; i++) { + char *sym_strtab; + Elf_Sym *sh_symtab; + struct section *sec_applies, *sec_symtab; + int j; + struct section *sec = &secs[i]; + + if (sec->shdr.sh_type != SHT_REL_TYPE) + continue; + + sec_symtab = sec->link; + sec_applies = &secs[sec->shdr.sh_info]; + if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) + continue; + + sh_symtab = sec_symtab->symtab; + sym_strtab = sec_symtab->link->strtab; + for (j = 0; j < sec->shdr.sh_size/sizeof(Elf_Rel); j++) { + Elf_Rel *rel = &sec->reltab[j]; + Elf_Sym *sym = &sh_symtab[ELF_R_SYM(rel->r_info)]; + const char *symname = sym_name(sym_strtab, sym); + + process(sec, rel, sym, symname); + } + } +} + +static int do_reloc(struct section *sec, Elf_Rel *rel, Elf_Sym *sym, + const char *symname) +{ + unsigned r_type = ELF_R_TYPE(rel->r_info); + unsigned bind = ELF_ST_BIND(sym->st_info); + + if ((bind == STB_WEAK) && (sym->st_value == 0)) { + /* Don't relocate weak symbols without a target */ + return 0; + } + + if (regex_skip_reloc(symname)) + return 0; + + switch (r_type) { + case R_MIPS_NONE: + case R_MIPS_REL32: + case R_MIPS_PC16: + case R_MIPS_PC21_S2: + case R_MIPS_PC26_S2: + /* + * NONE can be ignored and PC relative relocations don't + * need to be adjusted. + */ + case R_MIPS_HIGHEST: + case R_MIPS_HIGHER: + /* We support relocating within the same 4Gb segment only, + * thus leaving the top 32bits unchanged + */ + case R_MIPS_LO16: + /* We support relocating by 64k jumps only + * thus leaving the bottom 16bits unchanged + */ + break; + + case R_MIPS_64: + case R_MIPS_32: + case R_MIPS_26: + case R_MIPS_HI16: + add_reloc(&relocs, rel->r_offset, r_type); + break; + + default: + die("Unsupported relocation type: %s (%d)\n", + rel_type(r_type), r_type); + break; + } + + return 0; +} + +static int write_reloc_as_bin(uint32_t v, FILE *f) +{ + unsigned char buf[4]; + + v = cpu_to_elf32(v); + + memcpy(buf, &v, sizeof(uint32_t)); + return fwrite(buf, 1, 4, f); +} + +static int write_reloc_as_text(uint32_t v, FILE *f) +{ + int res; + + res = fprintf(f, "\t.long 0x%08"PRIx32"\n", v); + if (res < 0) + return res; + else + return sizeof(uint32_t); +} + +static void emit_relocs(int as_text, int as_bin, FILE *outf) +{ + int i; + int (*write_reloc)(uint32_t, FILE *) = write_reloc_as_bin; + int size = 0; + int size_reserved; + struct section *sec_reloc; + + sec_reloc = sec_lookup(".data.reloc"); + if (!sec_reloc) + die("Could not find relocation section\n"); + + size_reserved = sec_reloc->shdr.sh_size; + + /* Collect up the relocations */ + walk_relocs(do_reloc); + + /* Print the relocations */ + if (as_text) { + /* Print the relocations in a form suitable that + * gas will like. + */ + printf(".section \".data.reloc\",\"a\"\n"); + printf(".balign 4\n"); + /* Output text to stdout */ + write_reloc = write_reloc_as_text; + outf = stdout; + } else if (as_bin) { + /* Output raw binary to stdout */ + outf = stdout; + } else { + /* Seek to offset of the relocation section. + * Each relocation is then written into the + * vmlinux kernel image. + */ + if (fseek(outf, sec_reloc->shdr.sh_offset, SEEK_SET) < 0) { + die("Seek to %d failed: %s\n", + sec_reloc->shdr.sh_offset, strerror(errno)); + } + } + + for (i = 0; i < relocs.count; i++) + size += write_reloc(relocs.offset[i], outf); + + /* Print a stop, but only if we've actually written some relocs */ + if (size) + size += write_reloc(0, outf); + + if (size > size_reserved) + /* Die, but suggest a value for CONFIG_RELOCATION_TABLE_SIZE + * which will fix this problem and allow a bit of headroom + * if more kernel features are enabled + */ + die("Relocations overflow available space!\n" \ + "Please adjust CONFIG_RELOCATION_TABLE_SIZE " \ + "to at least 0x%08x\n", (size + 0x1000) & ~0xFFF); +} + +/* + * As an aid to debugging problems with different linkers + * print summary information about the relocs. + * Since different linkers tend to emit the sections in + * different orders we use the section names in the output. + */ +static int do_reloc_info(struct section *sec, Elf_Rel *rel, ElfW(Sym) *sym, + const char *symname) +{ + printf("%16s 0x%08x %16s %40s %16s\n", + sec_name(sec->shdr.sh_info), + (unsigned int)rel->r_offset, + rel_type(ELF_R_TYPE(rel->r_info)), + symname, + sec_name(sym->st_shndx)); + return 0; +} + +static void print_reloc_info(void) +{ + printf("%16s %10s %16s %40s %16s\n", + "reloc section", + "offset", + "reloc type", + "symbol", + "symbol section"); + walk_relocs(do_reloc_info); +} + +#if ELF_BITS == 64 +# define process process_64 +#else +# define process process_32 +#endif + +void process(FILE *fp, int as_text, int as_bin, + int show_reloc_info, int keep_relocs) +{ + regex_init(); + read_ehdr(fp); + read_shdrs(fp); + read_strtabs(fp); + read_symtabs(fp); + read_relocs(fp); + if (show_reloc_info) { + print_reloc_info(); + return; + } + emit_relocs(as_text, as_bin, fp); + if (!keep_relocs) + remove_relocs(fp); +} diff --git a/arch/mips/boot/tools/relocs.h b/arch/mips/boot/tools/relocs.h new file mode 100644 index 000000000..3cf676f49 --- /dev/null +++ b/arch/mips/boot/tools/relocs.h @@ -0,0 +1,45 @@ +#ifndef RELOCS_H +#define RELOCS_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#define USE_BSD +#include +#include + +void die(char *fmt, ...); + +/* + * Introduced for MIPSr6 + */ +#ifndef R_MIPS_PC21_S2 +#define R_MIPS_PC21_S2 60 +#endif + +#ifndef R_MIPS_PC26_S2 +#define R_MIPS_PC26_S2 61 +#endif + +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + +enum symtype { + S_ABS, + S_REL, + S_SEG, + S_LIN, + S_NSYMTYPES +}; + +void process_32(FILE *fp, int as_text, int as_bin, + int show_reloc_info, int keep_relocs); +void process_64(FILE *fp, int as_text, int as_bin, + int show_reloc_info, int keep_relocs); +#endif /* RELOCS_H */ diff --git a/arch/mips/boot/tools/relocs_32.c b/arch/mips/boot/tools/relocs_32.c new file mode 100644 index 000000000..915bdc07f --- /dev/null +++ b/arch/mips/boot/tools/relocs_32.c @@ -0,0 +1,17 @@ +#include "relocs.h" + +#define ELF_BITS 32 + +#define ELF_MACHINE EM_MIPS +#define ELF_MACHINE_NAME "MIPS" +#define SHT_REL_TYPE SHT_REL +#define Elf_Rel ElfW(Rel) + +#define ELF_CLASS ELFCLASS32 +#define ELF_R_SYM(val) ELF32_R_SYM(val) +#define ELF_R_TYPE(val) ELF32_R_TYPE(val) +#define ELF_ST_TYPE(o) ELF32_ST_TYPE(o) +#define ELF_ST_BIND(o) ELF32_ST_BIND(o) +#define ELF_ST_VISIBILITY(o) ELF32_ST_VISIBILITY(o) + +#include "relocs.c" diff --git a/arch/mips/boot/tools/relocs_64.c b/arch/mips/boot/tools/relocs_64.c new file mode 100644 index 000000000..b671b5e2d --- /dev/null +++ b/arch/mips/boot/tools/relocs_64.c @@ -0,0 +1,27 @@ +#include "relocs.h" + +#define ELF_BITS 64 + +#define ELF_MACHINE EM_MIPS +#define ELF_MACHINE_NAME "MIPS64" +#define SHT_REL_TYPE SHT_RELA +#define Elf_Rel Elf64_Rela + +typedef uint8_t Elf64_Byte; + +typedef struct { + Elf64_Word r_sym; /* Symbol index. */ + Elf64_Byte r_ssym; /* Special symbol. */ + Elf64_Byte r_type3; /* Third relocation. */ + Elf64_Byte r_type2; /* Second relocation. */ + Elf64_Byte r_type; /* First relocation. */ +} Elf64_Mips_Rela; + +#define ELF_CLASS ELFCLASS64 +#define ELF_R_SYM(val) (((Elf64_Mips_Rela *)(&val))->r_sym) +#define ELF_R_TYPE(val) (((Elf64_Mips_Rela *)(&val))->r_type) +#define ELF_ST_TYPE(o) ELF64_ST_TYPE(o) +#define ELF_ST_BIND(o) ELF64_ST_BIND(o) +#define ELF_ST_VISIBILITY(o) ELF64_ST_VISIBILITY(o) + +#include "relocs.c" diff --git a/arch/mips/boot/tools/relocs_main.c b/arch/mips/boot/tools/relocs_main.c new file mode 100644 index 000000000..d8fe2343b --- /dev/null +++ b/arch/mips/boot/tools/relocs_main.c @@ -0,0 +1,84 @@ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "relocs.h" + +void die(char *fmt, ...) +{ + va_list ap; + + va_start(ap, fmt); + vfprintf(stderr, fmt, ap); + va_end(ap); + exit(1); +} + +static void usage(void) +{ + die("relocs [--reloc-info|--text|--bin|--keep] vmlinux\n"); +} + +int main(int argc, char **argv) +{ + int show_reloc_info, as_text, as_bin, keep_relocs; + const char *fname; + FILE *fp; + int i; + unsigned char e_ident[EI_NIDENT]; + + show_reloc_info = 0; + as_text = 0; + as_bin = 0; + keep_relocs = 0; + fname = NULL; + for (i = 1; i < argc; i++) { + char *arg = argv[i]; + + if (*arg == '-') { + if (strcmp(arg, "--reloc-info") == 0) { + show_reloc_info = 1; + continue; + } + if (strcmp(arg, "--text") == 0) { + as_text = 1; + continue; + } + if (strcmp(arg, "--bin") == 0) { + as_bin = 1; + continue; + } + if (strcmp(arg, "--keep") == 0) { + keep_relocs = 1; + continue; + } + } else if (!fname) { + fname = arg; + continue; + } + usage(); + } + if (!fname) + usage(); + + fp = fopen(fname, "r+"); + if (!fp) + die("Cannot open %s: %s\n", fname, strerror(errno)); + + if (fread(&e_ident, 1, EI_NIDENT, fp) != EI_NIDENT) + die("Cannot read %s: %s", fname, strerror(errno)); + + rewind(fp); + if (e_ident[EI_CLASS] == ELFCLASS64) + process_64(fp, as_text, as_bin, show_reloc_info, keep_relocs); + else + process_32(fp, as_text, as_bin, show_reloc_info, keep_relocs); + fclose(fp); + return 0; +} -- cgit v1.2.3-54-g00ecf