From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- arch/mips/include/asm/mach-db1x00/bcsr.h | 260 +++++++++++++++++++++++++++++++ arch/mips/include/asm/mach-db1x00/irq.h | 23 +++ 2 files changed, 283 insertions(+) create mode 100644 arch/mips/include/asm/mach-db1x00/bcsr.h create mode 100644 arch/mips/include/asm/mach-db1x00/irq.h (limited to 'arch/mips/include/asm/mach-db1x00') diff --git a/arch/mips/include/asm/mach-db1x00/bcsr.h b/arch/mips/include/asm/mach-db1x00/bcsr.h new file mode 100644 index 000000000..3c3ed4ae4 --- /dev/null +++ b/arch/mips/include/asm/mach-db1x00/bcsr.h @@ -0,0 +1,260 @@ +/* + * bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction. + * + * All Alchemy development boards (except, of course, the weird PB1000) + * have a few registers in a CPLD with standardised layout; they mostly + * only differ in base address and bit meanings in the RESETS and BOARD + * registers. + * + * All data taken from the official AMD board documentation sheets. + */ + +#ifndef _DB1XXX_BCSR_H_ +#define _DB1XXX_BCSR_H_ + + +/* BCSR base addresses on various boards. BCSR base 2 refers to the + * physical address of the first HEXLEDS register, which is usually + * a variable offset from the WHOAMI register. + */ + +/* DB1000, DB1100, DB1500, PB1100, PB1500 */ +#define DB1000_BCSR_PHYS_ADDR 0x0E000000 +#define DB1000_BCSR_HEXLED_OFS 0x01000000 + +#define DB1550_BCSR_PHYS_ADDR 0x0F000000 +#define DB1550_BCSR_HEXLED_OFS 0x00400000 + +#define PB1550_BCSR_PHYS_ADDR 0x0F000000 +#define PB1550_BCSR_HEXLED_OFS 0x00800000 + +#define DB1200_BCSR_PHYS_ADDR 0x19800000 +#define DB1200_BCSR_HEXLED_OFS 0x00400000 + +#define PB1200_BCSR_PHYS_ADDR 0x0D800000 +#define PB1200_BCSR_HEXLED_OFS 0x00400000 + +#define DB1300_BCSR_PHYS_ADDR 0x19800000 +#define DB1300_BCSR_HEXLED_OFS 0x00400000 + +enum bcsr_id { + /* BCSR base 1 */ + BCSR_WHOAMI = 0, + BCSR_STATUS, + BCSR_SWITCHES, + BCSR_RESETS, + BCSR_PCMCIA, + BCSR_BOARD, + BCSR_LEDS, + BCSR_SYSTEM, + /* Au1200/1300 based boards */ + BCSR_INTCLR, + BCSR_INTSET, + BCSR_MASKCLR, + BCSR_MASKSET, + BCSR_SIGSTAT, + BCSR_INTSTAT, + + /* BCSR base 2 */ + BCSR_HEXLEDS, + BCSR_RSVD1, + BCSR_HEXCLEAR, + + BCSR_CNT, +}; + +/* register offsets, valid for all Db1xxx/Pb1xxx boards */ +#define BCSR_REG_WHOAMI 0x00 +#define BCSR_REG_STATUS 0x04 +#define BCSR_REG_SWITCHES 0x08 +#define BCSR_REG_RESETS 0x0c +#define BCSR_REG_PCMCIA 0x10 +#define BCSR_REG_BOARD 0x14 +#define BCSR_REG_LEDS 0x18 +#define BCSR_REG_SYSTEM 0x1c +/* Au1200/Au1300 based boards: CPLD IRQ muxer */ +#define BCSR_REG_INTCLR 0x20 +#define BCSR_REG_INTSET 0x24 +#define BCSR_REG_MASKCLR 0x28 +#define BCSR_REG_MASKSET 0x2c +#define BCSR_REG_SIGSTAT 0x30 +#define BCSR_REG_INTSTAT 0x34 + +/* hexled control, offset from BCSR base 2 */ +#define BCSR_REG_HEXLEDS 0x00 +#define BCSR_REG_HEXCLEAR 0x08 + +/* + * Register Bits and Pieces. + */ +#define BCSR_WHOAMI_DCID(x) ((x) & 0xf) +#define BCSR_WHOAMI_CPLD(x) (((x) >> 4) & 0xf) +#define BCSR_WHOAMI_BOARD(x) (((x) >> 8) & 0xf) + +/* register "WHOAMI" bits 11:8 identify the board */ +enum bcsr_whoami_boards { + BCSR_WHOAMI_PB1500 = 1, + BCSR_WHOAMI_PB1500R2, + BCSR_WHOAMI_PB1100, + BCSR_WHOAMI_DB1000, + BCSR_WHOAMI_DB1100, + BCSR_WHOAMI_DB1500, + BCSR_WHOAMI_DB1550, + BCSR_WHOAMI_PB1550_DDR, + BCSR_WHOAMI_PB1550 = BCSR_WHOAMI_PB1550_DDR, + BCSR_WHOAMI_PB1550_SDR, + BCSR_WHOAMI_PB1200_DDR1, + BCSR_WHOAMI_PB1200 = BCSR_WHOAMI_PB1200_DDR1, + BCSR_WHOAMI_PB1200_DDR2, + BCSR_WHOAMI_DB1200, + BCSR_WHOAMI_DB1300, +}; + +/* STATUS reg. Unless otherwise noted, they're valid on all boards. + * PB1200 = DB1200. + */ +#define BCSR_STATUS_PC0VS 0x0003 +#define BCSR_STATUS_PC1VS 0x000C +#define BCSR_STATUS_PC0FI 0x0010 +#define BCSR_STATUS_PC1FI 0x0020 +#define BCSR_STATUS_PB1550_SWAPBOOT 0x0040 +#define BCSR_STATUS_SRAMWIDTH 0x0080 +#define BCSR_STATUS_FLASHBUSY 0x0100 +#define BCSR_STATUS_ROMBUSY 0x0400 +#define BCSR_STATUS_SD0WP 0x0400 /* DB1200/DB1300:SD1 */ +#define BCSR_STATUS_SD1WP 0x0800 +#define BCSR_STATUS_USBOTGID 0x0800 /* PB/DB1550 */ +#define BCSR_STATUS_DB1000_SWAPBOOT 0x2000 +#define BCSR_STATUS_DB1200_SWAPBOOT 0x0040 /* DB1200/1300 */ +#define BCSR_STATUS_IDECBLID 0x0200 /* DB1200/1300 */ +#define BCSR_STATUS_DB1200_U0RXD 0x1000 /* DB1200 */ +#define BCSR_STATUS_DB1200_U1RXD 0x2000 /* DB1200 */ +#define BCSR_STATUS_FLASHDEN 0xC000 +#define BCSR_STATUS_DB1550_U0RXD 0x1000 /* DB1550 */ +#define BCSR_STATUS_DB1550_U3RXD 0x2000 /* DB1550 */ +#define BCSR_STATUS_PB1550_U0RXD 0x1000 /* PB1550 */ +#define BCSR_STATUS_PB1550_U1RXD 0x2000 /* PB1550 */ +#define BCSR_STATUS_PB1550_U3RXD 0x8000 /* PB1550 */ + +#define BCSR_STATUS_CFWP 0x4000 /* DB1300 */ +#define BCSR_STATUS_USBOCn 0x2000 /* DB1300 */ +#define BCSR_STATUS_OTGOCn 0x1000 /* DB1300 */ +#define BCSR_STATUS_DCDMARQ 0x0010 /* DB1300 */ +#define BCSR_STATUS_IDEDMARQ 0x0020 /* DB1300 */ + +/* DB/PB1000,1100,1500,1550 */ +#define BCSR_RESETS_PHY0 0x0001 +#define BCSR_RESETS_PHY1 0x0002 +#define BCSR_RESETS_DC 0x0004 +#define BCSR_RESETS_FIR_SEL 0x2000 +#define BCSR_RESETS_IRDA_MODE_MASK 0xC000 +#define BCSR_RESETS_IRDA_MODE_FULL 0x0000 +#define BCSR_RESETS_PB1550_WSCFSM 0x2000 +#define BCSR_RESETS_IRDA_MODE_OFF 0x4000 +#define BCSR_RESETS_IRDA_MODE_2_3 0x8000 +#define BCSR_RESETS_IRDA_MODE_1_3 0xC000 +#define BCSR_RESETS_DMAREQ 0x8000 /* PB1550 */ + +#define BCSR_BOARD_PCIM66EN 0x0001 +#define BCSR_BOARD_SD0PWR 0x0040 +#define BCSR_BOARD_SD1PWR 0x0080 +#define BCSR_BOARD_PCIM33 0x0100 +#define BCSR_BOARD_PCIEXTARB 0x0200 +#define BCSR_BOARD_GPIO200RST 0x0400 +#define BCSR_BOARD_PCICLKOUT 0x0800 +#define BCSR_BOARD_PB1100_SD0PWR 0x0400 +#define BCSR_BOARD_PB1100_SD1PWR 0x0800 +#define BCSR_BOARD_PCICFG 0x1000 +#define BCSR_BOARD_SPISEL 0x2000 /* PB/DB1550 */ +#define BCSR_BOARD_SD0WP 0x4000 /* DB1100 */ +#define BCSR_BOARD_SD1WP 0x8000 /* DB1100 */ + + +/* DB/PB1200/1300 */ +#define BCSR_RESETS_ETH 0x0001 +#define BCSR_RESETS_CAMERA 0x0002 +#define BCSR_RESETS_DC 0x0004 +#define BCSR_RESETS_IDE 0x0008 +#define BCSR_RESETS_TV 0x0010 /* DB1200/1300 */ +/* Not resets but in the same register */ +#define BCSR_RESETS_PWMR1MUX 0x0800 /* DB1200 */ +#define BCSR_RESETS_PB1200_WSCFSM 0x0800 /* PB1200 */ +#define BCSR_RESETS_PSC0MUX 0x1000 +#define BCSR_RESETS_PSC1MUX 0x2000 +#define BCSR_RESETS_SPISEL 0x4000 +#define BCSR_RESETS_SD1MUX 0x8000 /* PB1200 */ + +#define BCSR_RESETS_VDDQSHDN 0x0200 /* DB1300 */ +#define BCSR_RESETS_OTPPGM 0x0400 /* DB1300 */ +#define BCSR_RESETS_OTPSCLK 0x0800 /* DB1300 */ +#define BCSR_RESETS_OTPWRPROT 0x1000 /* DB1300 */ +#define BCSR_RESETS_OTPCSB 0x2000 /* DB1300 */ +#define BCSR_RESETS_OTGPWR 0x4000 /* DB1300 */ +#define BCSR_RESETS_USBHPWR 0x8000 /* DB1300 */ + +#define BCSR_BOARD_LCDVEE 0x0001 +#define BCSR_BOARD_LCDVDD 0x0002 +#define BCSR_BOARD_LCDBL 0x0004 +#define BCSR_BOARD_CAMSNAP 0x0010 +#define BCSR_BOARD_CAMPWR 0x0020 +#define BCSR_BOARD_SD0PWR 0x0040 +#define BCSR_BOARD_CAMCS 0x0010 /* DB1300 */ +#define BCSR_BOARD_HDMI_DE 0x0040 /* DB1300 */ + +#define BCSR_SWITCHES_DIP 0x00FF +#define BCSR_SWITCHES_DIP_1 0x0080 +#define BCSR_SWITCHES_DIP_2 0x0040 +#define BCSR_SWITCHES_DIP_3 0x0020 +#define BCSR_SWITCHES_DIP_4 0x0010 +#define BCSR_SWITCHES_DIP_5 0x0008 +#define BCSR_SWITCHES_DIP_6 0x0004 +#define BCSR_SWITCHES_DIP_7 0x0002 +#define BCSR_SWITCHES_DIP_8 0x0001 +#define BCSR_SWITCHES_ROTARY 0x0F00 + + +#define BCSR_PCMCIA_PC0VPP 0x0003 +#define BCSR_PCMCIA_PC0VCC 0x000C +#define BCSR_PCMCIA_PC0DRVEN 0x0010 +#define BCSR_PCMCIA_PC0RST 0x0080 +#define BCSR_PCMCIA_PC1VPP 0x0300 +#define BCSR_PCMCIA_PC1VCC 0x0C00 +#define BCSR_PCMCIA_PC1DRVEN 0x1000 +#define BCSR_PCMCIA_PC1RST 0x8000 + + +#define BCSR_LEDS_DECIMALS 0x0003 +#define BCSR_LEDS_LED0 0x0100 +#define BCSR_LEDS_LED1 0x0200 +#define BCSR_LEDS_LED2 0x0400 +#define BCSR_LEDS_LED3 0x0800 + + +#define BCSR_SYSTEM_RESET 0x8000 /* clear to reset */ +#define BCSR_SYSTEM_PWROFF 0x4000 /* set to power off */ +#define BCSR_SYSTEM_VDDI 0x001F /* PB1xxx boards */ +#define BCSR_SYSTEM_DEBUGCSMASK 0x003F /* DB1300 */ +#define BCSR_SYSTEM_UDMAMODE 0x0100 /* DB1300 */ +#define BCSR_SYSTEM_WAKEONIRQ 0x0200 /* DB1300 */ +#define BCSR_SYSTEM_VDDI1300 0x3C00 /* DB1300 */ + + + +/* initialize BCSR for a board. Provide the PHYSICAL addresses of both + * BCSR spaces. + */ +void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys); + +/* read a board register */ +unsigned short bcsr_read(enum bcsr_id reg); + +/* write to a board register */ +void bcsr_write(enum bcsr_id reg, unsigned short val); + +/* modify a register. clear bits set in 'clr', set bits set in 'set' */ +void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set); + +/* install CPLD IRQ demuxer (DB1200/PB1200) */ +void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq); + +#endif diff --git a/arch/mips/include/asm/mach-db1x00/irq.h b/arch/mips/include/asm/mach-db1x00/irq.h new file mode 100644 index 000000000..15b266932 --- /dev/null +++ b/arch/mips/include/asm/mach-db1x00/irq.h @@ -0,0 +1,23 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 by Ralf Baechle + */ +#ifndef __ASM_MACH_GENERIC_IRQ_H +#define __ASM_MACH_GENERIC_IRQ_H + + +#ifdef NR_IRQS +#undef NR_IRQS +#endif + +#ifndef MIPS_CPU_IRQ_BASE +#define MIPS_CPU_IRQ_BASE 0 +#endif + +/* 8 (MIPS) + 128 (au1300) + 16 (cpld) */ +#define NR_IRQS 152 + +#endif /* __ASM_MACH_GENERIC_IRQ_H */ -- cgit v1.2.3-54-g00ecf