From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- arch/mips/pci/pci-ip27.c | 230 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 230 insertions(+) create mode 100644 arch/mips/pci/pci-ip27.c (limited to 'arch/mips/pci/pci-ip27.c') diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c new file mode 100644 index 000000000..0f09eafa5 --- /dev/null +++ b/arch/mips/pci/pci-ip27.c @@ -0,0 +1,230 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Christoph Hellwig (hch@lst.de) + * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Max #PCI busses we can handle; ie, max #PCI bridges. + */ +#define MAX_PCI_BUSSES 40 + +/* + * Max #PCI devices (like scsi controllers) we handle on a bus. + */ +#define MAX_DEVICES_PER_PCIBUS 8 + +/* + * XXX: No kmalloc available when we do our crosstalk scan, + * we should try to move it later in the boot process. + */ +static struct bridge_controller bridges[MAX_PCI_BUSSES]; + +/* + * Translate from irq to software PCI bus number and PCI slot. + */ +struct bridge_controller *irq_to_bridge[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS]; +int irq_to_slot[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS]; + +extern struct pci_ops bridge_pci_ops; + +int bridge_probe(nasid_t nasid, int widget_id, int masterwid) +{ + unsigned long offset = NODE_OFFSET(nasid); + struct bridge_controller *bc; + static int num_bridges = 0; + bridge_t *bridge; + int slot; + + pci_set_flags(PCI_PROBE_ONLY); + + printk("a bridge\n"); + + /* XXX: kludge alert.. */ + if (!num_bridges) + ioport_resource.end = ~0UL; + + bc = &bridges[num_bridges]; + + bc->pc.pci_ops = &bridge_pci_ops; + bc->pc.mem_resource = &bc->mem; + bc->pc.io_resource = &bc->io; + + bc->pc.index = num_bridges; + + bc->mem.name = "Bridge PCI MEM"; + bc->pc.mem_offset = offset; + bc->mem.start = 0; + bc->mem.end = ~0UL; + bc->mem.flags = IORESOURCE_MEM; + + bc->io.name = "Bridge IO MEM"; + bc->pc.io_offset = offset; + bc->io.start = 0UL; + bc->io.end = ~0UL; + bc->io.flags = IORESOURCE_IO; + + bc->irq_cpu = smp_processor_id(); + bc->widget_id = widget_id; + bc->nasid = nasid; + + bc->baddr = (u64)masterwid << 60 | PCI64_ATTR_BAR; + + /* + * point to this bridge + */ + bridge = (bridge_t *) RAW_NODE_SWIN_BASE(nasid, widget_id); + + /* + * Clear all pending interrupts. + */ + bridge->b_int_rst_stat = BRIDGE_IRR_ALL_CLR; + + /* + * Until otherwise set up, assume all interrupts are from slot 0 + */ + bridge->b_int_device = 0x0; + + /* + * swap pio's to pci mem and io space (big windows) + */ + bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP | + BRIDGE_CTRL_MEM_SWAP; +#ifdef CONFIG_PAGE_SIZE_4KB + bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE; +#else /* 16kB or larger */ + bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE; +#endif + + /* + * Hmm... IRIX sets additional bits in the address which + * are documented as reserved in the bridge docs. + */ + bridge->b_wid_int_upper = 0x8000 | (masterwid << 16); + bridge->b_wid_int_lower = 0x01800090; /* PI_INT_PEND_MOD off*/ + bridge->b_dir_map = (masterwid << 20); /* DMA */ + bridge->b_int_enable = 0; + + for (slot = 0; slot < 8; slot ++) { + bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR; + bc->pci_int[slot] = -1; + } + bridge->b_wid_tflush; /* wait until Bridge PIO complete */ + + bc->base = bridge; + + register_pci_controller(&bc->pc); + + num_bridges++; + + return 0; +} + +/* + * All observed requests have pin == 1. We could have a global here, that + * gets incremented and returned every time - unfortunately, pci_map_irq + * may be called on the same device over and over, and need to return the + * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7]. + * + * A given PCI device, in general, should be able to intr any of the cpus + * on any one of the hubs connected to its xbow. + */ +int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return 0; +} + +static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev) +{ + while (dev->bus->parent) { + /* Move up the chain of bridges. */ + dev = dev->bus->self; + } + + return dev; +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); + struct pci_dev *rdev = bridge_root_dev(dev); + int slot = PCI_SLOT(rdev->devfn); + int irq; + + irq = bc->pci_int[slot]; + if (irq == -1) { + irq = request_bridge_irq(bc); + if (irq < 0) + return irq; + + bc->pci_int[slot] = irq; + } + + irq_to_bridge[irq] = bc; + irq_to_slot[irq] = slot; + + dev->irq = irq; + + return 0; +} + +/* + * Device might live on a subordinate PCI bus. XXX Walk up the chain of buses + * to find the slot number in sense of the bridge device register. + * XXX This also means multiple devices might rely on conflicting bridge + * settings. + */ + +static inline void pci_disable_swapping(struct pci_dev *dev) +{ + struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); + bridge_t *bridge = bc->base; + int slot = PCI_SLOT(dev->devfn); + + /* Turn off byte swapping */ + bridge->b_device[slot].reg &= ~BRIDGE_DEV_SWAP_DIR; + bridge->b_widget.w_tflush; /* Flush */ +} + +static inline void pci_enable_swapping(struct pci_dev *dev) +{ + struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); + bridge_t *bridge = bc->base; + int slot = PCI_SLOT(dev->devfn); + + /* Turn on byte swapping */ + bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR; + bridge->b_widget.w_tflush; /* Flush */ +} + +static void pci_fixup_ioc3(struct pci_dev *d) +{ + pci_disable_swapping(d); +} + +#ifdef CONFIG_NUMA +int pcibus_to_node(struct pci_bus *bus) +{ + struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); + + return bc->nasid; +} +EXPORT_SYMBOL(pcibus_to_node); +#endif /* CONFIG_NUMA */ + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, + pci_fixup_ioc3); -- cgit v1.2.3-54-g00ecf