From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- arch/mips/ralink/rt288x.c | 122 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 122 insertions(+) create mode 100644 arch/mips/ralink/rt288x.c (limited to 'arch/mips/ralink/rt288x.c') diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c new file mode 100644 index 000000000..738cec865 --- /dev/null +++ b/arch/mips/ralink/rt288x.c @@ -0,0 +1,122 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * Copyright (C) 2008-2011 Gabor Juhos + * Copyright (C) 2008 Imre Kaloz + * Copyright (C) 2013 John Crispin + */ + +#include +#include +#include + +#include +#include +#include +#include + +#include "common.h" + +static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) }; +static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) }; +static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 8) }; +static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) }; +static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) }; +static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) }; +static struct rt2880_pmx_func pci_func[] = { FUNC("pci", 0, 40, 32) }; + +static struct rt2880_pmx_group rt2880_pinmux_data_act[] = { + GRP("i2c", i2c_func, 1, RT2880_GPIO_MODE_I2C), + GRP("spi", spi_func, 1, RT2880_GPIO_MODE_SPI), + GRP("uartlite", uartlite_func, 1, RT2880_GPIO_MODE_UART0), + GRP("jtag", jtag_func, 1, RT2880_GPIO_MODE_JTAG), + GRP("mdio", mdio_func, 1, RT2880_GPIO_MODE_MDIO), + GRP("sdram", sdram_func, 1, RT2880_GPIO_MODE_SDRAM), + GRP("pci", pci_func, 1, RT2880_GPIO_MODE_PCI), + { 0 } +}; + +static void rt288x_wdt_reset(void) +{ + u32 t; + + /* enable WDT reset output on pin SRAM_CS_N */ + t = rt_sysc_r32(SYSC_REG_CLKCFG); + t |= CLKCFG_SRAM_CS_N_WDT; + rt_sysc_w32(t, SYSC_REG_CLKCFG); +} + +void __init ralink_clk_init(void) +{ + unsigned long cpu_rate, wmac_rate = 40000000; + u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG); + t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK); + + switch (t) { + case SYSTEM_CONFIG_CPUCLK_250: + cpu_rate = 250000000; + break; + case SYSTEM_CONFIG_CPUCLK_266: + cpu_rate = 266666667; + break; + case SYSTEM_CONFIG_CPUCLK_280: + cpu_rate = 280000000; + break; + case SYSTEM_CONFIG_CPUCLK_300: + cpu_rate = 300000000; + break; + } + + ralink_clk_add("cpu", cpu_rate); + ralink_clk_add("300100.timer", cpu_rate / 2); + ralink_clk_add("300120.watchdog", cpu_rate / 2); + ralink_clk_add("300500.uart", cpu_rate / 2); + ralink_clk_add("300c00.uartlite", cpu_rate / 2); + ralink_clk_add("400000.ethernet", cpu_rate / 2); + ralink_clk_add("480000.wmac", wmac_rate); +} + +void __init ralink_of_remap(void) +{ + rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc"); + rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc"); + + if (!rt_sysc_membase || !rt_memc_membase) + panic("Failed to remap core resources"); +} + +void prom_soc_init(struct ralink_soc_info *soc_info) +{ + void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE); + const char *name; + u32 n0; + u32 n1; + u32 id; + + n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); + n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); + id = __raw_readl(sysc + SYSC_REG_CHIP_ID); + + if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) { + soc_info->compatible = "ralink,r2880-soc"; + name = "RT2880"; + } else { + panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1); + } + + snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, + "Ralink %s id:%u rev:%u", + name, + (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK, + (id & CHIP_ID_REV_MASK)); + + soc_info->mem_base = RT2880_SDRAM_BASE; + soc_info->mem_size_min = RT2880_MEM_SIZE_MIN; + soc_info->mem_size_max = RT2880_MEM_SIZE_MAX; + + rt2880_pinmux_data = rt2880_pinmux_data_act; +} -- cgit v1.2.3-54-g00ecf