From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- arch/mips/sibyte/sb1250/Makefile | 3 + arch/mips/sibyte/sb1250/irq.c | 337 +++++++++++++++++++++++++++++++++++++++ arch/mips/sibyte/sb1250/setup.c | 248 ++++++++++++++++++++++++++++ arch/mips/sibyte/sb1250/smp.c | 177 ++++++++++++++++++++ arch/mips/sibyte/sb1250/time.c | 27 ++++ 5 files changed, 792 insertions(+) create mode 100644 arch/mips/sibyte/sb1250/Makefile create mode 100644 arch/mips/sibyte/sb1250/irq.c create mode 100644 arch/mips/sibyte/sb1250/setup.c create mode 100644 arch/mips/sibyte/sb1250/smp.c create mode 100644 arch/mips/sibyte/sb1250/time.c (limited to 'arch/mips/sibyte/sb1250') diff --git a/arch/mips/sibyte/sb1250/Makefile b/arch/mips/sibyte/sb1250/Makefile new file mode 100644 index 000000000..cdc4c56c3 --- /dev/null +++ b/arch/mips/sibyte/sb1250/Makefile @@ -0,0 +1,3 @@ +obj-y := setup.o irq.o time.o + +obj-$(CONFIG_SMP) += smp.o diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c new file mode 100644 index 000000000..6d8dba5cf --- /dev/null +++ b/arch/mips/sibyte/sb1250/irq.c @@ -0,0 +1,337 @@ +/* + * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* + * These are the routines that handle all the low level interrupt stuff. + * Actions handled here are: initialization of the interrupt map, requesting of + * interrupt lines by handlers, dispatching if interrupts to handlers, probing + * for interrupt lines + */ + +#ifdef CONFIG_SIBYTE_HAS_LDT +extern unsigned long ldt_eoi_space; +#endif + +/* Store the CPU id (not the logical number) */ +int sb1250_irq_owner[SB1250_NR_IRQS]; + +static DEFINE_RAW_SPINLOCK(sb1250_imr_lock); + +void sb1250_mask_irq(int cpu, int irq) +{ + unsigned long flags; + u64 cur_ints; + + raw_spin_lock_irqsave(&sb1250_imr_lock, flags); + cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + cur_ints |= (((u64) 1) << irq); + ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags); +} + +void sb1250_unmask_irq(int cpu, int irq) +{ + unsigned long flags; + u64 cur_ints; + + raw_spin_lock_irqsave(&sb1250_imr_lock, flags); + cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + cur_ints &= ~(((u64) 1) << irq); + ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags); +} + +#ifdef CONFIG_SMP +static int sb1250_set_affinity(struct irq_data *d, const struct cpumask *mask, + bool force) +{ + int i = 0, old_cpu, cpu, int_on; + unsigned int irq = d->irq; + u64 cur_ints; + unsigned long flags; + + i = cpumask_first_and(mask, cpu_online_mask); + + /* Convert logical CPU to physical CPU */ + cpu = cpu_logical_map(i); + + /* Protect against other affinity changers and IMR manipulation */ + raw_spin_lock_irqsave(&sb1250_imr_lock, flags); + + /* Swizzle each CPU's IMR (but leave the IP selection alone) */ + old_cpu = sb1250_irq_owner[irq]; + cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) + + R_IMR_INTERRUPT_MASK)); + int_on = !(cur_ints & (((u64) 1) << irq)); + if (int_on) { + /* If it was on, mask it */ + cur_ints |= (((u64) 1) << irq); + ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) + + R_IMR_INTERRUPT_MASK)); + } + sb1250_irq_owner[irq] = cpu; + if (int_on) { + /* unmask for the new CPU */ + cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + cur_ints &= ~(((u64) 1) << irq); + ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + } + raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags); + + return 0; +} +#endif + +static void disable_sb1250_irq(struct irq_data *d) +{ + unsigned int irq = d->irq; + + sb1250_mask_irq(sb1250_irq_owner[irq], irq); +} + +static void enable_sb1250_irq(struct irq_data *d) +{ + unsigned int irq = d->irq; + + sb1250_unmask_irq(sb1250_irq_owner[irq], irq); +} + + +static void ack_sb1250_irq(struct irq_data *d) +{ + unsigned int irq = d->irq; +#ifdef CONFIG_SIBYTE_HAS_LDT + u64 pending; + + /* + * If the interrupt was an HT interrupt, now is the time to + * clear it. NOTE: we assume the HT bridge was set up to + * deliver the interrupts to all CPUs (which makes affinity + * changing easier for us) + */ + pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq], + R_IMR_LDT_INTERRUPT))); + pending &= ((u64)1 << (irq)); + if (pending) { + int i; + for (i=0; i +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +unsigned int sb1_pass; +unsigned int soc_pass; +unsigned int soc_type; +EXPORT_SYMBOL(soc_type); +unsigned int periph_rev; +unsigned int zbbus_mhz; +EXPORT_SYMBOL(zbbus_mhz); + +static char *soc_str; +static char *pass_str; +static unsigned int war_pass; /* XXXKW don't overload PASS defines? */ + +static int __init setup_bcm1250(void) +{ + int ret = 0; + + switch (soc_pass) { + case K_SYS_REVISION_BCM1250_PASS1: + periph_rev = 1; + pass_str = "Pass 1"; + break; + case K_SYS_REVISION_BCM1250_A10: + periph_rev = 2; + pass_str = "A8/A10"; + /* XXXKW different war_pass? */ + war_pass = K_SYS_REVISION_BCM1250_PASS2; + break; + case K_SYS_REVISION_BCM1250_PASS2_2: + periph_rev = 2; + pass_str = "B1"; + break; + case K_SYS_REVISION_BCM1250_B2: + periph_rev = 2; + pass_str = "B2"; + war_pass = K_SYS_REVISION_BCM1250_PASS2_2; + break; + case K_SYS_REVISION_BCM1250_PASS3: + periph_rev = 3; + pass_str = "C0"; + break; + case K_SYS_REVISION_BCM1250_C1: + periph_rev = 3; + pass_str = "C1"; + break; + default: + if (soc_pass < K_SYS_REVISION_BCM1250_PASS2_2) { + periph_rev = 2; + pass_str = "A0-A6"; + war_pass = K_SYS_REVISION_BCM1250_PASS2; + } else { + printk("Unknown BCM1250 rev %x\n", soc_pass); + ret = 1; + } + break; + } + + return ret; +} + +int sb1250_m3_workaround_needed(void) +{ + switch (soc_type) { + case K_SYS_SOC_TYPE_BCM1250: + case K_SYS_SOC_TYPE_BCM1250_ALT: + case K_SYS_SOC_TYPE_BCM1250_ALT2: + case K_SYS_SOC_TYPE_BCM1125: + case K_SYS_SOC_TYPE_BCM1125H: + return soc_pass < K_SYS_REVISION_BCM1250_C0; + + default: + return 0; + } +} + +static int __init setup_bcm112x(void) +{ + int ret = 0; + + switch (soc_pass) { + case 0: + /* Early build didn't have revid set */ + periph_rev = 3; + pass_str = "A1"; + war_pass = K_SYS_REVISION_BCM112x_A1; + break; + case K_SYS_REVISION_BCM112x_A1: + periph_rev = 3; + pass_str = "A1"; + break; + case K_SYS_REVISION_BCM112x_A2: + periph_rev = 3; + pass_str = "A2"; + break; + case K_SYS_REVISION_BCM112x_A3: + periph_rev = 3; + pass_str = "A3"; + break; + case K_SYS_REVISION_BCM112x_A4: + periph_rev = 3; + pass_str = "A4"; + break; + case K_SYS_REVISION_BCM112x_B0: + periph_rev = 3; + pass_str = "B0"; + break; + default: + printk("Unknown %s rev %x\n", soc_str, soc_pass); + ret = 1; + } + + return ret; +} + +/* Setup code likely to be common to all SiByte platforms */ + +static int __init sys_rev_decode(void) +{ + int ret = 0; + + war_pass = soc_pass; + switch (soc_type) { + case K_SYS_SOC_TYPE_BCM1250: + case K_SYS_SOC_TYPE_BCM1250_ALT: + case K_SYS_SOC_TYPE_BCM1250_ALT2: + soc_str = "BCM1250"; + ret = setup_bcm1250(); + break; + case K_SYS_SOC_TYPE_BCM1120: + soc_str = "BCM1120"; + ret = setup_bcm112x(); + break; + case K_SYS_SOC_TYPE_BCM1125: + soc_str = "BCM1125"; + ret = setup_bcm112x(); + break; + case K_SYS_SOC_TYPE_BCM1125H: + soc_str = "BCM1125H"; + ret = setup_bcm112x(); + break; + default: + printk("Unknown SOC type %x\n", soc_type); + ret = 1; + break; + } + + return ret; +} + +void __init sb1250_setup(void) +{ + uint64_t sys_rev; + int plldiv; + int bad_config = 0; + + sb1_pass = read_c0_prid() & PRID_REV_MASK; + sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION)); + soc_type = SYS_SOC_TYPE(sys_rev); + soc_pass = G_SYS_REVISION(sys_rev); + + if (sys_rev_decode()) { + printk("Restart after failure to identify SiByte chip\n"); + machine_restart(NULL); + } + + plldiv = G_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG))); + zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25); + + printk("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n", + soc_str, pass_str, zbbus_mhz * 2, sb1_pass); + printk("Board type: %s\n", get_system_type()); + + switch (war_pass) { + case K_SYS_REVISION_BCM1250_PASS1: +#ifndef CONFIG_SB1_PASS_1_WORKAROUNDS + printk("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, " + "and the kernel doesn't have the proper " + "workarounds compiled in. @@@@\n"); + bad_config = 1; +#endif + break; + case K_SYS_REVISION_BCM1250_PASS2: + /* Pass 2 - easiest as default for now - so many numbers */ +#if !defined(CONFIG_SB1_PASS_2_WORKAROUNDS) || \ + !defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) + printk("@@@@ This is a BCM1250 A3-A10 board, and the " + "kernel doesn't have the proper workarounds " + "compiled in. @@@@\n"); + bad_config = 1; +#endif +#ifdef CONFIG_CPU_HAS_PREFETCH + printk("@@@@ Prefetches may be enabled in this kernel, " + "but are buggy on this board. @@@@\n"); + bad_config = 1; +#endif + break; + case K_SYS_REVISION_BCM1250_PASS2_2: +#ifndef CONFIG_SB1_PASS_2_WORKAROUNDS + printk("@@@@ This is a BCM1250 B1/B2. board, and the " + "kernel doesn't have the proper workarounds " + "compiled in. @@@@\n"); + bad_config = 1; +#endif +#if defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) || \ + !defined(CONFIG_CPU_HAS_PREFETCH) + printk("@@@@ This is a BCM1250 B1/B2, but the kernel is " + "conservatively configured for an 'A' stepping. " + "@@@@\n"); +#endif + break; + default: + break; + } + if (bad_config) { + printk("Invalid configuration for this chip.\n"); + machine_restart(NULL); + } +} diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c new file mode 100644 index 000000000..c0c4b3f88 --- /dev/null +++ b/arch/mips/sibyte/sb1250/smp.c @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2001, 2002, 2003 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +static void *mailbox_set_regs[] = { + IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU), + IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU) +}; + +static void *mailbox_clear_regs[] = { + IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU), + IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU) +}; + +static void *mailbox_regs[] = { + IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU), + IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU) +}; + +/* + * SMP init and finish on secondary CPUs + */ +void sb1250_smp_init(void) +{ + unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 | + STATUSF_IP1 | STATUSF_IP0; + + /* Set interrupt mask, but don't enable */ + change_c0_status(ST0_IM, imask); +} + +/* + * These are routines for dealing with the sb1250 smp capabilities + * independent of board/firmware + */ + +/* + * Simple enough; everything is set up, so just poke the appropriate mailbox + * register, and we should be set + */ +static void sb1250_send_ipi_single(int cpu, unsigned int action) +{ + __raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]); +} + +static inline void sb1250_send_ipi_mask(const struct cpumask *mask, + unsigned int action) +{ + unsigned int i; + + for_each_cpu(i, mask) + sb1250_send_ipi_single(i, action); +} + +/* + * Code to run on secondary just after probing the CPU + */ +static void sb1250_init_secondary(void) +{ + extern void sb1250_smp_init(void); + + sb1250_smp_init(); +} + +/* + * Do any tidying up before marking online and running the idle + * loop + */ +static void sb1250_smp_finish(void) +{ + extern void sb1250_clockevent_init(void); + + sb1250_clockevent_init(); + local_irq_enable(); +} + +/* + * Setup the PC, SP, and GP of a secondary processor and start it + * running! + */ +static void sb1250_boot_secondary(int cpu, struct task_struct *idle) +{ + int retval; + + retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap, + __KSTK_TOS(idle), + (unsigned long)task_thread_info(idle), 0); + if (retval != 0) + printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval); +} + +/* + * Use CFE to find out how many CPUs are available, setting up + * cpu_possible_mask and the logical/physical mappings. + * XXXKW will the boot CPU ever not be physical 0? + * + * Common setup before any secondaries are started + */ +static void __init sb1250_smp_setup(void) +{ + int i, num; + + init_cpu_possible(cpumask_of(0)); + __cpu_number_map[0] = 0; + __cpu_logical_map[0] = 0; + + for (i = 1, num = 0; i < NR_CPUS; i++) { + if (cfe_cpu_stop(i) == 0) { + set_cpu_possible(i, true); + __cpu_number_map[i] = ++num; + __cpu_logical_map[num] = i; + } + } + printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); +} + +static void __init sb1250_prepare_cpus(unsigned int max_cpus) +{ +} + +struct plat_smp_ops sb_smp_ops = { + .send_ipi_single = sb1250_send_ipi_single, + .send_ipi_mask = sb1250_send_ipi_mask, + .init_secondary = sb1250_init_secondary, + .smp_finish = sb1250_smp_finish, + .boot_secondary = sb1250_boot_secondary, + .smp_setup = sb1250_smp_setup, + .prepare_cpus = sb1250_prepare_cpus, +}; + +void sb1250_mailbox_interrupt(void) +{ + int cpu = smp_processor_id(); + int irq = K_INT_MBOX_0; + unsigned int action; + + kstat_incr_irq_this_cpu(irq); + /* Load the mailbox register to figure out what we're supposed to do */ + action = (____raw_readq(mailbox_regs[cpu]) >> 48) & 0xffff; + + /* Clear the mailbox to clear the interrupt */ + ____raw_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]); + + if (action & SMP_RESCHEDULE_YOURSELF) + scheduler_ipi(); + + if (action & SMP_CALL_FUNCTION) + smp_call_function_interrupt(); +} diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c new file mode 100644 index 000000000..68337bf7a --- /dev/null +++ b/arch/mips/sibyte/sb1250/time.c @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2000, 2001 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#include + +extern void sb1250_clocksource_init(void); +extern void sb1250_clockevent_init(void); + +void __init plat_time_init(void) +{ + sb1250_clocksource_init(); + sb1250_clockevent_init(); +} -- cgit v1.2.3-54-g00ecf