From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001
From: André Fabian Silva Delgado <emulatorman@parabola.nu>
Date: Wed, 5 Aug 2015 17:04:01 -0300
Subject: Initial import

---
 arch/powerpc/platforms/83xx/km83xx.c | 197 +++++++++++++++++++++++++++++++++++
 1 file changed, 197 insertions(+)
 create mode 100644 arch/powerpc/platforms/83xx/km83xx.c

(limited to 'arch/powerpc/platforms/83xx/km83xx.c')

diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
new file mode 100644
index 000000000..bf4c4473a
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright 2008-2011 DENX Software Engineering GmbH
+ * Author: Heiko Schocher <hs@denx.de>
+ *
+ * Description:
+ * Keymile 83xx platform specific routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+
+#include <linux/atomic.h>
+#include <linux/time.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+
+#include "mpc83xx.h"
+
+#define SVR_REV(svr)    (((svr) >>  0) & 0xFFFF) /* Revision field */
+
+static void quirk_mpc8360e_qe_enet10(void)
+{
+	/*
+	 * handle mpc8360E Erratum QE_ENET10:
+	 * RGMII AC values do not meet the specification
+	 */
+	uint svid = mfspr(SPRN_SVR);
+	struct	device_node *np_par;
+	struct	resource res;
+	void	__iomem *base;
+	int	ret;
+
+	np_par = of_find_node_by_name(NULL, "par_io");
+	if (np_par == NULL) {
+		pr_warn("%s couldn;t find par_io node\n", __func__);
+		return;
+	}
+	/* Map Parallel I/O ports registers */
+	ret = of_address_to_resource(np_par, 0, &res);
+	if (ret) {
+		pr_warn("%s couldn;t map par_io registers\n", __func__);
+		return;
+	}
+
+	base = ioremap(res.start, res.end - res.start + 1);
+
+	/*
+	 * set output delay adjustments to default values according
+	 * table 5 in Errata Rev. 5, 9/2011:
+	 *
+	 * write 0b01 to UCC1 bits 18:19
+	 * write 0b01 to UCC2 option 1 bits 4:5
+	 * write 0b01 to UCC2 option 2 bits 16:17
+	 */
+	clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000);
+
+	/*
+	 * set output delay adjustments to default values according
+	 * table 3-13 in Reference Manual Rev.3 05/2010:
+	 *
+	 * write 0b01 to UCC2 option 2 bits 16:17
+	 * write 0b0101 to UCC1 bits 20:23
+	 * write 0b0101 to UCC2 option 1 bits 24:27
+	 */
+	clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550);
+
+	if (SVR_REV(svid) == 0x0021) {
+		/*
+		 * UCC2 option 1: write 0b1010 to bits 24:27
+		 * at address IMMRBAR+0x14AC
+		 */
+		clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0);
+	} else if (SVR_REV(svid) == 0x0020) {
+		/*
+		 * UCC1: write 0b11 to bits 18:19
+		 * at address IMMRBAR+0x14A8
+		 */
+		setbits32((base + 0xa8), 0x00003000);
+
+		/*
+		 * UCC2 option 1: write 0b11 to bits 4:5
+		 * at address IMMRBAR+0x14A8
+		 */
+		setbits32((base + 0xa8), 0x0c000000);
+
+		/*
+		 * UCC2 option 2: write 0b11 to bits 16:17
+		 * at address IMMRBAR+0x14AC
+		 */
+		setbits32((base + 0xac), 0x0000c000);
+	}
+	iounmap(base);
+	of_node_put(np_par);
+}
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc83xx_km_setup_arch(void)
+{
+#ifdef CONFIG_QUICC_ENGINE
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("kmpbec83xx_setup_arch()", 0);
+
+	mpc83xx_setup_pci();
+
+#ifdef CONFIG_QUICC_ENGINE
+	qe_reset();
+
+	np = of_find_node_by_name(NULL, "par_io");
+	if (np != NULL) {
+		par_io_init(np);
+		of_node_put(np);
+
+		for_each_node_by_name(np, "spi")
+			par_io_of_config(np);
+
+		for_each_node_by_name(np, "ucc")
+			par_io_of_config(np);
+
+		/* Only apply this quirk when par_io is available */
+		np = of_find_compatible_node(NULL, "network", "ucc_geth");
+		if (np != NULL) {
+			quirk_mpc8360e_qe_enet10();
+			of_node_put(np);
+		}
+	}
+#endif	/* CONFIG_QUICC_ENGINE */
+}
+
+machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices);
+
+/* list of the supported boards */
+static char *board[] __initdata = {
+	"Keymile,KMETER1",
+	"Keymile,kmpbec8321",
+	NULL
+};
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc83xx_km_probe(void)
+{
+	unsigned long node = of_get_flat_dt_root();
+	int i = 0;
+
+	while (board[i]) {
+		if (of_flat_dt_is_compatible(node, board[i]))
+			break;
+		i++;
+	}
+	return (board[i] != NULL);
+}
+
+define_machine(mpc83xx_km) {
+	.name		= "mpc83xx-km-platform",
+	.probe		= mpc83xx_km_probe,
+	.setup_arch	= mpc83xx_km_setup_arch,
+	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
+	.get_irq	= ipic_get_irq,
+	.restart	= mpc83xx_restart,
+	.time_init	= mpc83xx_time_init,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress	= udbg_progress,
+};
-- 
cgit v1.2.3-54-g00ecf