From b907a8622e39eecfc4b243f3be3ad26559d1faee Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?= Date: Mon, 27 Jun 2016 21:01:09 -0300 Subject: Linux-libre 4.6.3-gnu --- arch/powerpc/include/asm/reg.h | 6 ++-- arch/powerpc/kernel/prom_init.c | 1 + arch/powerpc/mm/hash_utils_64.c | 22 ++++++++++-- arch/powerpc/platforms/pseries/eeh_pseries.c | 51 ++++++++++++++++++++-------- 4 files changed, 60 insertions(+), 20 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index f5f4c66bb..166d86317 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -715,7 +715,7 @@ #define MMCR0_FCWAIT 0x00000002UL /* freeze counter in WAIT state */ #define MMCR0_FCHV 0x00000001UL /* freeze conditions in hypervisor mode */ #define SPRN_MMCR1 798 -#define SPRN_MMCR2 769 +#define SPRN_MMCR2 785 #define SPRN_MMCRA 0x312 #define MMCRA_SDSYNC 0x80000000UL /* SDAR synced with SIAR */ #define MMCRA_SDAR_DCACHE_MISS 0x40000000UL @@ -752,13 +752,13 @@ #define SPRN_PMC6 792 #define SPRN_PMC7 793 #define SPRN_PMC8 794 -#define SPRN_SIAR 780 -#define SPRN_SDAR 781 #define SPRN_SIER 784 #define SIER_SIPR 0x2000000 /* Sampled MSR_PR */ #define SIER_SIHV 0x1000000 /* Sampled MSR_HV */ #define SIER_SIAR_VALID 0x0400000 /* SIAR contents valid */ #define SIER_SDAR_VALID 0x0200000 /* SDAR contents valid */ +#define SPRN_SIAR 796 +#define SPRN_SDAR 797 #define SPRN_TACR 888 #define SPRN_TCSCR 889 #define SPRN_CSIGR 890 diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index da5192590..ccd2037c7 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -656,6 +656,7 @@ unsigned char ibm_architecture_vec[] = { W(0xffff0000), W(0x003e0000), /* POWER6 */ W(0xffff0000), W(0x003f0000), /* POWER7 */ W(0xffff0000), W(0x004b0000), /* POWER8E */ + W(0xffff0000), W(0x004c0000), /* POWER8NVL */ W(0xffff0000), W(0x004d0000), /* POWER8 */ W(0xffffffff), W(0x0f000004), /* all 2.07-compliant */ W(0xffffffff), W(0x0f000003), /* all 2.06-compliant */ diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 7635b1c6b..f4acba25f 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -159,6 +159,19 @@ static struct mmu_psize_def mmu_psize_defaults_gp[] = { }, }; +/* + * 'R' and 'C' update notes: + * - Under pHyp or KVM, the updatepp path will not set C, thus it *will* + * create writeable HPTEs without C set, because the hcall H_PROTECT + * that we use in that case will not update C + * - The above is however not a problem, because we also don't do that + * fancy "no flush" variant of eviction and we use H_REMOVE which will + * do the right thing and thus we don't have the race I described earlier + * + * - Under bare metal, we do have the race, so we need R and C set + * - We make sure R is always set and never lost + * - C is _PAGE_DIRTY, and *should* always be set for a writeable mapping + */ unsigned long htab_convert_pte_flags(unsigned long pteflags) { unsigned long rflags = 0; @@ -180,9 +193,14 @@ unsigned long htab_convert_pte_flags(unsigned long pteflags) rflags |= 0x1; } /* - * Always add "C" bit for perf. Memory coherence is always enabled + * We can't allow hardware to update hpte bits. Hence always + * set 'R' bit and set 'C' if it is a write fault + * Memory coherence is always enabled */ - rflags |= HPTE_R_C | HPTE_R_M; + rflags |= HPTE_R_R | HPTE_R_M; + + if (pteflags & _PAGE_DIRTY) + rflags |= HPTE_R_C; /* * Add in WIG bits */ diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index ac3ffd97e..405baaf96 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -615,29 +615,50 @@ static int pseries_eeh_configure_bridge(struct eeh_pe *pe) { int config_addr; int ret; + /* Waiting 0.2s maximum before skipping configuration */ + int max_wait = 200; /* Figure out the PE address */ config_addr = pe->config_addr; if (pe->addr) config_addr = pe->addr; - /* Use new configure-pe function, if supported */ - if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) { - ret = rtas_call(ibm_configure_pe, 3, 1, NULL, - config_addr, BUID_HI(pe->phb->buid), - BUID_LO(pe->phb->buid)); - } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) { - ret = rtas_call(ibm_configure_bridge, 3, 1, NULL, - config_addr, BUID_HI(pe->phb->buid), - BUID_LO(pe->phb->buid)); - } else { - return -EFAULT; - } + while (max_wait > 0) { + /* Use new configure-pe function, if supported */ + if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) { + ret = rtas_call(ibm_configure_pe, 3, 1, NULL, + config_addr, BUID_HI(pe->phb->buid), + BUID_LO(pe->phb->buid)); + } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) { + ret = rtas_call(ibm_configure_bridge, 3, 1, NULL, + config_addr, BUID_HI(pe->phb->buid), + BUID_LO(pe->phb->buid)); + } else { + return -EFAULT; + } - if (ret) - pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n", - __func__, pe->phb->global_number, pe->addr, ret); + if (!ret) + return ret; + + /* + * If RTAS returns a delay value that's above 100ms, cut it + * down to 100ms in case firmware made a mistake. For more + * on how these delay values work see rtas_busy_delay_time + */ + if (ret > RTAS_EXTENDED_DELAY_MIN+2 && + ret <= RTAS_EXTENDED_DELAY_MAX) + ret = RTAS_EXTENDED_DELAY_MIN+2; + + max_wait -= rtas_busy_delay_time(ret); + + if (max_wait < 0) + break; + + rtas_busy_delay(ret); + } + pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n", + __func__, pe->phb->global_number, pe->addr, ret); return ret; } -- cgit v1.2.3