From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: AndrĂ© Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- arch/tile/kernel/process.c | 576 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 576 insertions(+) create mode 100644 arch/tile/kernel/process.c (limited to 'arch/tile/kernel/process.c') diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c new file mode 100644 index 000000000..b403c2e3e --- /dev/null +++ b/arch/tile/kernel/process.c @@ -0,0 +1,576 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_HARDWALL +#include +#endif +#include +#include +#include + +/* + * Use the (x86) "idle=poll" option to prefer low latency when leaving the + * idle loop over low power while in the idle loop, e.g. if we have + * one thread per core and we want to get threads out of futex waits fast. + */ +static int __init idle_setup(char *str) +{ + if (!str) + return -EINVAL; + + if (!strcmp(str, "poll")) { + pr_info("using polling idle threads\n"); + cpu_idle_poll_ctrl(true); + return 0; + } else if (!strcmp(str, "halt")) { + return 0; + } + return -1; +} +early_param("idle", idle_setup); + +void arch_cpu_idle(void) +{ + __this_cpu_write(irq_stat.idle_timestamp, jiffies); + _cpu_idle(); +} + +/* + * Release a thread_info structure + */ +void arch_release_thread_info(struct thread_info *info) +{ + struct single_step_state *step_state = info->step_state; + + if (step_state) { + + /* + * FIXME: we don't munmap step_state->buffer + * because the mm_struct for this process (info->task->mm) + * has already been zeroed in exit_mm(). Keeping a + * reference to it here seems like a bad move, so this + * means we can't munmap() the buffer, and therefore if we + * ptrace multiple threads in a process, we will slowly + * leak user memory. (Note that as soon as the last + * thread in a process dies, we will reclaim all user + * memory including single-step buffers in the usual way.) + * We should either assign a kernel VA to this buffer + * somehow, or we should associate the buffer(s) with the + * mm itself so we can clean them up that way. + */ + kfree(step_state); + } +} + +static void save_arch_state(struct thread_struct *t); + +int copy_thread(unsigned long clone_flags, unsigned long sp, + unsigned long arg, struct task_struct *p) +{ + struct pt_regs *childregs = task_pt_regs(p); + unsigned long ksp; + unsigned long *callee_regs; + + /* + * Set up the stack and stack pointer appropriately for the + * new child to find itself woken up in __switch_to(). + * The callee-saved registers must be on the stack to be read; + * the new task will then jump to assembly support to handle + * calling schedule_tail(), etc., and (for userspace tasks) + * returning to the context set up in the pt_regs. + */ + ksp = (unsigned long) childregs; + ksp -= C_ABI_SAVE_AREA_SIZE; /* interrupt-entry save area */ + ((long *)ksp)[0] = ((long *)ksp)[1] = 0; + ksp -= CALLEE_SAVED_REGS_COUNT * sizeof(unsigned long); + callee_regs = (unsigned long *)ksp; + ksp -= C_ABI_SAVE_AREA_SIZE; /* __switch_to() save area */ + ((long *)ksp)[0] = ((long *)ksp)[1] = 0; + p->thread.ksp = ksp; + + /* Record the pid of the task that created this one. */ + p->thread.creator_pid = current->pid; + + if (unlikely(p->flags & PF_KTHREAD)) { + /* kernel thread */ + memset(childregs, 0, sizeof(struct pt_regs)); + memset(&callee_regs[2], 0, + (CALLEE_SAVED_REGS_COUNT - 2) * sizeof(unsigned long)); + callee_regs[0] = sp; /* r30 = function */ + callee_regs[1] = arg; /* r31 = arg */ + childregs->ex1 = PL_ICS_EX1(KERNEL_PL, 0); + p->thread.pc = (unsigned long) ret_from_kernel_thread; + return 0; + } + + /* + * Start new thread in ret_from_fork so it schedules properly + * and then return from interrupt like the parent. + */ + p->thread.pc = (unsigned long) ret_from_fork; + + /* + * Do not clone step state from the parent; each thread + * must make its own lazily. + */ + task_thread_info(p)->step_state = NULL; + +#ifdef __tilegx__ + /* + * Do not clone unalign jit fixup from the parent; each thread + * must allocate its own on demand. + */ + task_thread_info(p)->unalign_jit_base = NULL; +#endif + + /* + * Copy the registers onto the kernel stack so the + * return-from-interrupt code will reload it into registers. + */ + *childregs = *current_pt_regs(); + childregs->regs[0] = 0; /* return value is zero */ + if (sp) + childregs->sp = sp; /* override with new user stack pointer */ + memcpy(callee_regs, &childregs->regs[CALLEE_SAVED_FIRST_REG], + CALLEE_SAVED_REGS_COUNT * sizeof(unsigned long)); + + /* Save user stack top pointer so we can ID the stack vm area later. */ + p->thread.usp0 = childregs->sp; + + /* + * If CLONE_SETTLS is set, set "tp" in the new task to "r4", + * which is passed in as arg #5 to sys_clone(). + */ + if (clone_flags & CLONE_SETTLS) + childregs->tp = childregs->regs[4]; + + +#if CHIP_HAS_TILE_DMA() + /* + * No DMA in the new thread. We model this on the fact that + * fork() clears the pending signals, alarms, and aio for the child. + */ + memset(&p->thread.tile_dma_state, 0, sizeof(struct tile_dma_state)); + memset(&p->thread.dma_async_tlb, 0, sizeof(struct async_tlb)); +#endif + + /* New thread has its miscellaneous processor state bits clear. */ + p->thread.proc_status = 0; + +#ifdef CONFIG_HARDWALL + /* New thread does not own any networks. */ + memset(&p->thread.hardwall[0], 0, + sizeof(struct hardwall_task) * HARDWALL_TYPES); +#endif + + + /* + * Start the new thread with the current architecture state + * (user interrupt masks, etc.). + */ + save_arch_state(&p->thread); + + return 0; +} + +int set_unalign_ctl(struct task_struct *tsk, unsigned int val) +{ + task_thread_info(tsk)->align_ctl = val; + return 0; +} + +int get_unalign_ctl(struct task_struct *tsk, unsigned long adr) +{ + return put_user(task_thread_info(tsk)->align_ctl, + (unsigned int __user *)adr); +} + +static struct task_struct corrupt_current = { .comm = "" }; + +/* + * Return "current" if it looks plausible, or else a pointer to a dummy. + * This can be helpful if we are just trying to emit a clean panic. + */ +struct task_struct *validate_current(void) +{ + struct task_struct *tsk = current; + if (unlikely((unsigned long)tsk < PAGE_OFFSET || + (high_memory && (void *)tsk > high_memory) || + ((unsigned long)tsk & (__alignof__(*tsk) - 1)) != 0)) { + pr_err("Corrupt 'current' %p (sp %#lx)\n", tsk, stack_pointer); + tsk = &corrupt_current; + } + return tsk; +} + +/* Take and return the pointer to the previous task, for schedule_tail(). */ +struct task_struct *sim_notify_fork(struct task_struct *prev) +{ + struct task_struct *tsk = current; + __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_FORK_PARENT | + (tsk->thread.creator_pid << _SIM_CONTROL_OPERATOR_BITS)); + __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_FORK | + (tsk->pid << _SIM_CONTROL_OPERATOR_BITS)); + return prev; +} + +int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) +{ + struct pt_regs *ptregs = task_pt_regs(tsk); + elf_core_copy_regs(regs, ptregs); + return 1; +} + +#if CHIP_HAS_TILE_DMA() + +/* Allow user processes to access the DMA SPRs */ +void grant_dma_mpls(void) +{ +#if CONFIG_KERNEL_PL == 2 + __insn_mtspr(SPR_MPL_DMA_CPL_SET_1, 1); + __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_1, 1); +#else + __insn_mtspr(SPR_MPL_DMA_CPL_SET_0, 1); + __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_0, 1); +#endif +} + +/* Forbid user processes from accessing the DMA SPRs */ +void restrict_dma_mpls(void) +{ +#if CONFIG_KERNEL_PL == 2 + __insn_mtspr(SPR_MPL_DMA_CPL_SET_2, 1); + __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_2, 1); +#else + __insn_mtspr(SPR_MPL_DMA_CPL_SET_1, 1); + __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_1, 1); +#endif +} + +/* Pause the DMA engine, then save off its state registers. */ +static void save_tile_dma_state(struct tile_dma_state *dma) +{ + unsigned long state = __insn_mfspr(SPR_DMA_USER_STATUS); + unsigned long post_suspend_state; + + /* If we're running, suspend the engine. */ + if ((state & DMA_STATUS_MASK) == SPR_DMA_STATUS__RUNNING_MASK) + __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__SUSPEND_MASK); + + /* + * Wait for the engine to idle, then save regs. Note that we + * want to record the "running" bit from before suspension, + * and the "done" bit from after, so that we can properly + * distinguish a case where the user suspended the engine from + * the case where the kernel suspended as part of the context + * swap. + */ + do { + post_suspend_state = __insn_mfspr(SPR_DMA_USER_STATUS); + } while (post_suspend_state & SPR_DMA_STATUS__BUSY_MASK); + + dma->src = __insn_mfspr(SPR_DMA_SRC_ADDR); + dma->src_chunk = __insn_mfspr(SPR_DMA_SRC_CHUNK_ADDR); + dma->dest = __insn_mfspr(SPR_DMA_DST_ADDR); + dma->dest_chunk = __insn_mfspr(SPR_DMA_DST_CHUNK_ADDR); + dma->strides = __insn_mfspr(SPR_DMA_STRIDE); + dma->chunk_size = __insn_mfspr(SPR_DMA_CHUNK_SIZE); + dma->byte = __insn_mfspr(SPR_DMA_BYTE); + dma->status = (state & SPR_DMA_STATUS__RUNNING_MASK) | + (post_suspend_state & SPR_DMA_STATUS__DONE_MASK); +} + +/* Restart a DMA that was running before we were context-switched out. */ +static void restore_tile_dma_state(struct thread_struct *t) +{ + const struct tile_dma_state *dma = &t->tile_dma_state; + + /* + * The only way to restore the done bit is to run a zero + * length transaction. + */ + if ((dma->status & SPR_DMA_STATUS__DONE_MASK) && + !(__insn_mfspr(SPR_DMA_USER_STATUS) & SPR_DMA_STATUS__DONE_MASK)) { + __insn_mtspr(SPR_DMA_BYTE, 0); + __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK); + while (__insn_mfspr(SPR_DMA_USER_STATUS) & + SPR_DMA_STATUS__BUSY_MASK) + ; + } + + __insn_mtspr(SPR_DMA_SRC_ADDR, dma->src); + __insn_mtspr(SPR_DMA_SRC_CHUNK_ADDR, dma->src_chunk); + __insn_mtspr(SPR_DMA_DST_ADDR, dma->dest); + __insn_mtspr(SPR_DMA_DST_CHUNK_ADDR, dma->dest_chunk); + __insn_mtspr(SPR_DMA_STRIDE, dma->strides); + __insn_mtspr(SPR_DMA_CHUNK_SIZE, dma->chunk_size); + __insn_mtspr(SPR_DMA_BYTE, dma->byte); + + /* + * Restart the engine if we were running and not done. + * Clear a pending async DMA fault that we were waiting on return + * to user space to execute, since we expect the DMA engine + * to regenerate those faults for us now. Note that we don't + * try to clear the TIF_ASYNC_TLB flag, since it's relatively + * harmless if set, and it covers both DMA and the SN processor. + */ + if ((dma->status & DMA_STATUS_MASK) == SPR_DMA_STATUS__RUNNING_MASK) { + t->dma_async_tlb.fault_num = 0; + __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK); + } +} + +#endif + +static void save_arch_state(struct thread_struct *t) +{ +#if CHIP_HAS_SPLIT_INTR_MASK() + t->interrupt_mask = __insn_mfspr(SPR_INTERRUPT_MASK_0_0) | + ((u64)__insn_mfspr(SPR_INTERRUPT_MASK_0_1) << 32); +#else + t->interrupt_mask = __insn_mfspr(SPR_INTERRUPT_MASK_0); +#endif + t->ex_context[0] = __insn_mfspr(SPR_EX_CONTEXT_0_0); + t->ex_context[1] = __insn_mfspr(SPR_EX_CONTEXT_0_1); + t->system_save[0] = __insn_mfspr(SPR_SYSTEM_SAVE_0_0); + t->system_save[1] = __insn_mfspr(SPR_SYSTEM_SAVE_0_1); + t->system_save[2] = __insn_mfspr(SPR_SYSTEM_SAVE_0_2); + t->system_save[3] = __insn_mfspr(SPR_SYSTEM_SAVE_0_3); + t->intctrl_0 = __insn_mfspr(SPR_INTCTRL_0_STATUS); + t->proc_status = __insn_mfspr(SPR_PROC_STATUS); +#if !CHIP_HAS_FIXED_INTVEC_BASE() + t->interrupt_vector_base = __insn_mfspr(SPR_INTERRUPT_VECTOR_BASE_0); +#endif + t->tile_rtf_hwm = __insn_mfspr(SPR_TILE_RTF_HWM); +#if CHIP_HAS_DSTREAM_PF() + t->dstream_pf = __insn_mfspr(SPR_DSTREAM_PF); +#endif +} + +static void restore_arch_state(const struct thread_struct *t) +{ +#if CHIP_HAS_SPLIT_INTR_MASK() + __insn_mtspr(SPR_INTERRUPT_MASK_0_0, (u32) t->interrupt_mask); + __insn_mtspr(SPR_INTERRUPT_MASK_0_1, t->interrupt_mask >> 32); +#else + __insn_mtspr(SPR_INTERRUPT_MASK_0, t->interrupt_mask); +#endif + __insn_mtspr(SPR_EX_CONTEXT_0_0, t->ex_context[0]); + __insn_mtspr(SPR_EX_CONTEXT_0_1, t->ex_context[1]); + __insn_mtspr(SPR_SYSTEM_SAVE_0_0, t->system_save[0]); + __insn_mtspr(SPR_SYSTEM_SAVE_0_1, t->system_save[1]); + __insn_mtspr(SPR_SYSTEM_SAVE_0_2, t->system_save[2]); + __insn_mtspr(SPR_SYSTEM_SAVE_0_3, t->system_save[3]); + __insn_mtspr(SPR_INTCTRL_0_STATUS, t->intctrl_0); + __insn_mtspr(SPR_PROC_STATUS, t->proc_status); +#if !CHIP_HAS_FIXED_INTVEC_BASE() + __insn_mtspr(SPR_INTERRUPT_VECTOR_BASE_0, t->interrupt_vector_base); +#endif + __insn_mtspr(SPR_TILE_RTF_HWM, t->tile_rtf_hwm); +#if CHIP_HAS_DSTREAM_PF() + __insn_mtspr(SPR_DSTREAM_PF, t->dstream_pf); +#endif +} + + +void _prepare_arch_switch(struct task_struct *next) +{ +#if CHIP_HAS_TILE_DMA() + struct tile_dma_state *dma = ¤t->thread.tile_dma_state; + if (dma->enabled) + save_tile_dma_state(dma); +#endif +} + + +struct task_struct *__sched _switch_to(struct task_struct *prev, + struct task_struct *next) +{ + /* DMA state is already saved; save off other arch state. */ + save_arch_state(&prev->thread); + +#if CHIP_HAS_TILE_DMA() + /* + * Restore DMA in new task if desired. + * Note that it is only safe to restart here since interrupts + * are disabled, so we can't take any DMATLB miss or access + * interrupts before we have finished switching stacks. + */ + if (next->thread.tile_dma_state.enabled) { + restore_tile_dma_state(&next->thread); + grant_dma_mpls(); + } else { + restrict_dma_mpls(); + } +#endif + + /* Restore other arch state. */ + restore_arch_state(&next->thread); + +#ifdef CONFIG_HARDWALL + /* Enable or disable access to the network registers appropriately. */ + hardwall_switch_tasks(prev, next); +#endif + + /* + * Switch kernel SP, PC, and callee-saved registers. + * In the context of the new task, return the old task pointer + * (i.e. the task that actually called __switch_to). + * Pass the value to use for SYSTEM_SAVE_K_0 when we reset our sp. + */ + return __switch_to(prev, next, next_current_ksp0(next)); +} + +/* + * This routine is called on return from interrupt if any of the + * TIF_WORK_MASK flags are set in thread_info->flags. It is + * entered with interrupts disabled so we don't miss an event + * that modified the thread_info flags. If any flag is set, we + * handle it and return, and the calling assembly code will + * re-disable interrupts, reload the thread flags, and call back + * if more flags need to be handled. + * + * We return whether we need to check the thread_info flags again + * or not. Note that we don't clear TIF_SINGLESTEP here, so it's + * important that it be tested last, and then claim that we don't + * need to recheck the flags. + */ +int do_work_pending(struct pt_regs *regs, u32 thread_info_flags) +{ + /* If we enter in kernel mode, do nothing and exit the caller loop. */ + if (!user_mode(regs)) + return 0; + + user_exit(); + + /* Enable interrupts; they are disabled again on return to caller. */ + local_irq_enable(); + + if (thread_info_flags & _TIF_NEED_RESCHED) { + schedule(); + return 1; + } +#if CHIP_HAS_TILE_DMA() + if (thread_info_flags & _TIF_ASYNC_TLB) { + do_async_page_fault(regs); + return 1; + } +#endif + if (thread_info_flags & _TIF_SIGPENDING) { + do_signal(regs); + return 1; + } + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + return 1; + } + if (thread_info_flags & _TIF_SINGLESTEP) + single_step_once(regs); + + user_enter(); + + return 0; +} + +unsigned long get_wchan(struct task_struct *p) +{ + struct KBacktraceIterator kbt; + + if (!p || p == current || p->state == TASK_RUNNING) + return 0; + + for (KBacktraceIterator_init(&kbt, p, NULL); + !KBacktraceIterator_end(&kbt); + KBacktraceIterator_next(&kbt)) { + if (!in_sched_functions(kbt.it.pc)) + return kbt.it.pc; + } + + return 0; +} + +/* Flush thread state. */ +void flush_thread(void) +{ + /* Nothing */ +} + +/* + * Free current thread data structures etc.. + */ +void exit_thread(void) +{ +#ifdef CONFIG_HARDWALL + /* + * Remove the task from the list of tasks that are associated + * with any live hardwalls. (If the task that is exiting held + * the last reference to a hardwall fd, it would already have + * been released and deactivated at this point.) + */ + hardwall_deactivate_all(current); +#endif +} + +void show_regs(struct pt_regs *regs) +{ + struct task_struct *tsk = validate_current(); + int i; + + if (tsk != &corrupt_current) + show_regs_print_info(KERN_ERR); +#ifdef __tilegx__ + for (i = 0; i < 17; i++) + pr_err(" r%-2d: " REGFMT " r%-2d: " REGFMT " r%-2d: " REGFMT "\n", + i, regs->regs[i], i+18, regs->regs[i+18], + i+36, regs->regs[i+36]); + pr_err(" r17: " REGFMT " r35: " REGFMT " tp : " REGFMT "\n", + regs->regs[17], regs->regs[35], regs->tp); + pr_err(" sp : " REGFMT " lr : " REGFMT "\n", regs->sp, regs->lr); +#else + for (i = 0; i < 13; i++) + pr_err(" r%-2d: " REGFMT " r%-2d: " REGFMT " r%-2d: " REGFMT " r%-2d: " REGFMT "\n", + i, regs->regs[i], i+14, regs->regs[i+14], + i+27, regs->regs[i+27], i+40, regs->regs[i+40]); + pr_err(" r13: " REGFMT " tp : " REGFMT " sp : " REGFMT " lr : " REGFMT "\n", + regs->regs[13], regs->tp, regs->sp, regs->lr); +#endif + pr_err(" pc : " REGFMT " ex1: %ld faultnum: %ld\n", + regs->pc, regs->ex1, regs->faultnum); + + dump_stack_regs(regs); +} -- cgit v1.2.3-54-g00ecf