From d635711daa98be86d4c7fd01499c34f566b54ccb Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Fri, 10 Jun 2016 05:30:17 -0300 Subject: Linux-libre 4.6.2-gnu --- arch/x86/entry/entry_64_compat.S | 102 ++++++++++++++++++++++++++------------- 1 file changed, 69 insertions(+), 33 deletions(-) (limited to 'arch/x86/entry/entry_64_compat.S') diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S index 3c990eeee..847f2f0c3 100644 --- a/arch/x86/entry/entry_64_compat.S +++ b/arch/x86/entry/entry_64_compat.S @@ -19,12 +19,21 @@ .section .entry.text, "ax" /* - * 32-bit SYSENTER instruction entry. + * 32-bit SYSENTER entry. * - * SYSENTER loads ss, rsp, cs, and rip from previously programmed MSRs. - * IF and VM in rflags are cleared (IOW: interrupts are off). + * 32-bit system calls through the vDSO's __kernel_vsyscall enter here + * on 64-bit kernels running on Intel CPUs. + * + * The SYSENTER instruction, in principle, should *only* occur in the + * vDSO. In practice, a small number of Android devices were shipped + * with a copy of Bionic that inlined a SYSENTER instruction. This + * never happened in any of Google's Bionic versions -- it only happened + * in a narrow range of Intel-provided versions. + * + * SYSENTER loads SS, RSP, CS, and RIP from previously programmed MSRs. + * IF and VM in RFLAGS are cleared (IOW: interrupts are off). * SYSENTER does not save anything on the stack, - * and does not save old rip (!!!) and rflags. + * and does not save old RIP (!!!), RSP, or RFLAGS. * * Arguments: * eax system call number @@ -35,10 +44,6 @@ * edi arg5 * ebp user stack * 0(%ebp) arg6 - * - * This is purely a fast path. For anything complicated we use the int 0x80 - * path below. We set up a complete hardware stack frame to share code - * with the int 0x80 path. */ ENTRY(entry_SYSENTER_compat) /* Interrupts are off on entry. */ @@ -66,8 +71,6 @@ ENTRY(entry_SYSENTER_compat) */ pushfq /* pt_regs->flags (except IF = 0) */ orl $X86_EFLAGS_IF, (%rsp) /* Fix saved flags */ - ASM_CLAC /* Clear AC after saving FLAGS */ - pushq $__USER32_CS /* pt_regs->cs */ xorq %r8,%r8 pushq %r8 /* pt_regs->ip = 0 (placeholder) */ @@ -90,19 +93,25 @@ ENTRY(entry_SYSENTER_compat) cld /* - * Sysenter doesn't filter flags, so we need to clear NT + * SYSENTER doesn't filter flags, so we need to clear NT and AC * ourselves. To save a few cycles, we can check whether - * NT was set instead of doing an unconditional popfq. + * either was set instead of doing an unconditional popfq. * This needs to happen before enabling interrupts so that * we don't get preempted with NT set. * + * If TF is set, we will single-step all the way to here -- do_debug + * will ignore all the traps. (Yes, this is slow, but so is + * single-stepping in general. This allows us to avoid having + * a more complicated code to handle the case where a user program + * forces us to single-step through the SYSENTER entry code.) + * * NB.: .Lsysenter_fix_flags is a label with the code under it moved * out-of-line as an optimization: NT is unlikely to be set in the * majority of the cases and instead of polluting the I$ unnecessarily, * we're keeping that code behind a branch which will predict as * not-taken and therefore its instructions won't be fetched. */ - testl $X86_EFLAGS_NT, EFLAGS(%rsp) + testl $X86_EFLAGS_NT|X86_EFLAGS_AC|X86_EFLAGS_TF, EFLAGS(%rsp) jnz .Lsysenter_fix_flags .Lsysenter_flags_fixed: @@ -123,20 +132,42 @@ ENTRY(entry_SYSENTER_compat) pushq $X86_EFLAGS_FIXED popfq jmp .Lsysenter_flags_fixed +GLOBAL(__end_entry_SYSENTER_compat) ENDPROC(entry_SYSENTER_compat) /* - * 32-bit SYSCALL instruction entry. + * 32-bit SYSCALL entry. + * + * 32-bit system calls through the vDSO's __kernel_vsyscall enter here + * on 64-bit kernels running on AMD CPUs. + * + * The SYSCALL instruction, in principle, should *only* occur in the + * vDSO. In practice, it appears that this really is the case. + * As evidence: + * + * - The calling convention for SYSCALL has changed several times without + * anyone noticing. * - * 32-bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11, - * then loads new ss, cs, and rip from previously programmed MSRs. - * rflags gets masked by a value from another MSR (so CLD and CLAC - * are not needed). SYSCALL does not save anything on the stack - * and does not change rsp. + * - Prior to the in-kernel X86_BUG_SYSRET_SS_ATTRS fixup, anything + * user task that did SYSCALL without immediately reloading SS + * would randomly crash. * - * Note: rflags saving+masking-with-MSR happens only in Long mode + * - Most programmers do not directly target AMD CPUs, and the 32-bit + * SYSCALL instruction does not exist on Intel CPUs. Even on AMD + * CPUs, Linux disables the SYSCALL instruction on 32-bit kernels + * because the SYSCALL instruction in legacy/native 32-bit mode (as + * opposed to compat mode) is sufficiently poorly designed as to be + * essentially unusable. + * + * 32-bit SYSCALL saves RIP to RCX, clears RFLAGS.RF, then saves + * RFLAGS to R11, then loads new SS, CS, and RIP from previously + * programmed MSRs. RFLAGS gets masked by a value from another MSR + * (so CLD and CLAC are not needed). SYSCALL does not save anything on + * the stack and does not change RSP. + * + * Note: RFLAGS saving+masking-with-MSR happens only in Long mode * (in legacy 32-bit mode, IF, RF and VM bits are cleared and that's it). - * Don't get confused: rflags saving+masking depends on Long Mode Active bit + * Don't get confused: RFLAGS saving+masking depends on Long Mode Active bit * (EFER.LMA=1), NOT on bitness of userspace where SYSCALL executes * or target CS descriptor's L bit (SYSCALL does not read segment descriptors). * @@ -236,7 +267,21 @@ sysret32_from_system_call: END(entry_SYSCALL_compat) /* - * Emulated IA32 system calls via int 0x80. + * 32-bit legacy system call entry. + * + * 32-bit x86 Linux system calls traditionally used the INT $0x80 + * instruction. INT $0x80 lands here. + * + * This entry point can be used by 32-bit and 64-bit programs to perform + * 32-bit system calls. Instances of INT $0x80 can be found inline in + * various programs and libraries. It is also used by the vDSO's + * __kernel_vsyscall fallback for hardware that doesn't support a faster + * entry method. Restarted 32-bit system calls also fall back to INT + * $0x80 regardless of what instruction was originally used to do the + * system call. + * + * This is considered a slow path. It is not used by most libc + * implementations on modern hardware except during process startup. * * Arguments: * eax system call number @@ -245,17 +290,8 @@ END(entry_SYSCALL_compat) * edx arg3 * esi arg4 * edi arg5 - * ebp arg6 (note: not saved in the stack frame, should not be touched) - * - * Notes: - * Uses the same stack frame as the x86-64 version. - * All registers except eax must be saved (but ptrace may violate that). - * Arguments are zero extended. For system calls that want sign extension and - * take long arguments a wrapper is needed. Most calls can just be called - * directly. - * Assumes it is only called from user space and entered with interrupts off. + * ebp arg6 */ - ENTRY(entry_INT80_compat) /* * Interrupts are off on entry. @@ -300,7 +336,7 @@ ENTRY(entry_INT80_compat) TRACE_IRQS_OFF movq %rsp, %rdi - call do_syscall_32_irqs_off + call do_int80_syscall_32 .Lsyscall_32_done: /* Go back to user mode. */ -- cgit v1.2.3-54-g00ecf