From 6ece15cc69504348ad484564d14968c542987053 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?= Date: Tue, 18 Aug 2015 00:33:29 -0300 Subject: Linux-libre 4.1.6-gnu --- arch/x86/kernel/entry_64.S | 286 +++++++++++++++++++++++++++++---------------- arch/x86/kernel/nmi.c | 123 +++++++++---------- arch/x86/kvm/lapic.h | 2 +- arch/x86/xen/enlighten.c | 40 +++++++ 4 files changed, 276 insertions(+), 175 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 02c2eff74..4bd6c1975 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -793,8 +793,6 @@ retint_kernel: restore_c_regs_and_iret: RESTORE_C_REGS REMOVE_PT_GPREGS_FROM_STACK 8 - -irq_return: INTERRUPT_RETURN ENTRY(native_iret) @@ -1413,11 +1411,12 @@ ENTRY(nmi) * If the variable is not set and the stack is not the NMI * stack then: * o Set the special variable on the stack - * o Copy the interrupt frame into a "saved" location on the stack - * o Copy the interrupt frame into a "copy" location on the stack + * o Copy the interrupt frame into an "outermost" location on the + * stack + * o Copy the interrupt frame into an "iret" location on the stack * o Continue processing the NMI * If the variable is set or the previous stack is the NMI stack: - * o Modify the "copy" location to jump to the repeate_nmi + * o Modify the "iret" location to jump to the repeat_nmi * o return back to the first NMI * * Now on exit of the first NMI, we first clear the stack variable @@ -1426,32 +1425,151 @@ ENTRY(nmi) * a nested NMI that updated the copy interrupt stack frame, a * jump will be made to the repeat_nmi code that will handle the second * NMI. + * + * However, espfix prevents us from directly returning to userspace + * with a single IRET instruction. Similarly, IRET to user mode + * can fault. We therefore handle NMIs from user space like + * other IST entries. */ /* Use %rdx as our temp variable throughout */ pushq_cfi %rdx CFI_REL_OFFSET rdx, 0 + testb $3, CS-RIP+8(%rsp) + jz .Lnmi_from_kernel + /* - * If %cs was not the kernel segment, then the NMI triggered in user - * space, which means it is definitely not nested. + * NMI from user mode. We need to run on the thread stack, but we + * can't go through the normal entry paths: NMIs are masked, and + * we don't want to enable interrupts, because then we'll end + * up in an awkward situation in which IRQs are on but NMIs + * are off. */ - cmpl $__KERNEL_CS, 16(%rsp) - jne first_nmi + + SWAPGS + cld + movq %rsp, %rdx + movq PER_CPU_VAR(kernel_stack), %rsp + pushq 5*8(%rdx) /* pt_regs->ss */ + pushq 4*8(%rdx) /* pt_regs->rsp */ + pushq 3*8(%rdx) /* pt_regs->flags */ + pushq 2*8(%rdx) /* pt_regs->cs */ + pushq 1*8(%rdx) /* pt_regs->rip */ + pushq $-1 /* pt_regs->orig_ax */ + pushq %rdi /* pt_regs->di */ + pushq %rsi /* pt_regs->si */ + pushq (%rdx) /* pt_regs->dx */ + pushq %rcx /* pt_regs->cx */ + pushq %rax /* pt_regs->ax */ + pushq %r8 /* pt_regs->r8 */ + pushq %r9 /* pt_regs->r9 */ + pushq %r10 /* pt_regs->r10 */ + pushq %r11 /* pt_regs->r11 */ + pushq %rbx /* pt_regs->rbx */ + pushq %rbp /* pt_regs->rbp */ + pushq %r12 /* pt_regs->r12 */ + pushq %r13 /* pt_regs->r13 */ + pushq %r14 /* pt_regs->r14 */ + pushq %r15 /* pt_regs->r15 */ /* - * Check the special variable on the stack to see if NMIs are - * executing. + * At this point we no longer need to worry about stack damage + * due to nesting -- we're on the normal thread stack and we're + * done with the NMI stack. + */ + movq %rsp, %rdi + movq $-1, %rsi + call do_nmi + + /* + * Return back to user mode. We must *not* do the normal exit + * work, because we don't want to enable interrupts. Fortunately, + * do_nmi doesn't modify pt_regs. + */ + SWAPGS + jmp restore_c_regs_and_iret + +.Lnmi_from_kernel: + /* + * Here's what our stack frame will look like: + * +---------------------------------------------------------+ + * | original SS | + * | original Return RSP | + * | original RFLAGS | + * | original CS | + * | original RIP | + * +---------------------------------------------------------+ + * | temp storage for rdx | + * +---------------------------------------------------------+ + * | "NMI executing" variable | + * +---------------------------------------------------------+ + * | iret SS } Copied from "outermost" frame | + * | iret Return RSP } on each loop iteration; overwritten | + * | iret RFLAGS } by a nested NMI to force another | + * | iret CS } iteration if needed. | + * | iret RIP } | + * +---------------------------------------------------------+ + * | outermost SS } initialized in first_nmi; | + * | outermost Return RSP } will not be changed before | + * | outermost RFLAGS } NMI processing is done. | + * | outermost CS } Copied to "iret" frame on each | + * | outermost RIP } iteration. | + * +---------------------------------------------------------+ + * | pt_regs | + * +---------------------------------------------------------+ + * + * The "original" frame is used by hardware. Before re-enabling + * NMIs, we need to be done with it, and we need to leave enough + * space for the asm code here. + * + * We return by executing IRET while RSP points to the "iret" frame. + * That will either return for real or it will loop back into NMI + * processing. + * + * The "outermost" frame is copied to the "iret" frame on each + * iteration of the loop, so each iteration starts with the "iret" + * frame pointing to the final return target. + */ + + /* + * Determine whether we're a nested NMI. + * + * If we interrupted kernel code between repeat_nmi and + * end_repeat_nmi, then we are a nested NMI. We must not + * modify the "iret" frame because it's being written by + * the outer NMI. That's okay; the outer NMI handler is + * about to about to call do_nmi anyway, so we can just + * resume the outer NMI. + */ + + movq $repeat_nmi, %rdx + cmpq 8(%rsp), %rdx + ja 1f + movq $end_repeat_nmi, %rdx + cmpq 8(%rsp), %rdx + ja nested_nmi_out +1: + + /* + * Now check "NMI executing". If it's set, then we're nested. + * This will not detect if we interrupted an outer NMI just + * before IRET. */ cmpl $1, -8(%rsp) je nested_nmi /* - * Now test if the previous stack was an NMI stack. - * We need the double check. We check the NMI stack to satisfy the - * race when the first NMI clears the variable before returning. - * We check the variable because the first NMI could be in a - * breakpoint routine using a breakpoint stack. + * Now test if the previous stack was an NMI stack. This covers + * the case where we interrupt an outer NMI after it clears + * "NMI executing" but before IRET. We need to be careful, though: + * there is one case in which RSP could point to the NMI stack + * despite there being no NMI active: naughty userspace controls + * RSP at the very beginning of the SYSCALL targets. We can + * pull a fast one on naughty userspace, though: we program + * SYSCALL to mask DF, so userspace cannot cause DF to be set + * if it controls the kernel's RSP. We set DF before we clear + * "NMI executing". */ lea 6*8(%rsp), %rdx /* Compare the NMI stack (rdx) with the stack we came from (4*8(%rsp)) */ @@ -1462,25 +1580,21 @@ ENTRY(nmi) cmpq %rdx, 4*8(%rsp) /* If it is below the NMI stack, it is a normal NMI */ jb first_nmi - /* Ah, it is within the NMI stack, treat it as nested */ + + /* Ah, it is within the NMI stack. */ + + testb $(X86_EFLAGS_DF >> 8), (3*8 + 1)(%rsp) + jz first_nmi /* RSP was user controlled. */ + + /* This is a nested NMI. */ CFI_REMEMBER_STATE nested_nmi: /* - * Do nothing if we interrupted the fixup in repeat_nmi. - * It's about to repeat the NMI handler, so we are fine - * with ignoring this one. + * Modify the "iret" frame to point to repeat_nmi, forcing another + * iteration of NMI handling. */ - movq $repeat_nmi, %rdx - cmpq 8(%rsp), %rdx - ja 1f - movq $end_repeat_nmi, %rdx - cmpq 8(%rsp), %rdx - ja nested_nmi_out - -1: - /* Set up the interrupted NMIs stack to jump to repeat_nmi */ leaq -1*8(%rsp), %rdx movq %rdx, %rsp CFI_ADJUST_CFA_OFFSET 1*8 @@ -1499,60 +1613,23 @@ nested_nmi_out: popq_cfi %rdx CFI_RESTORE rdx - /* No need to check faults here */ + /* We are returning to kernel mode, so this cannot result in a fault. */ INTERRUPT_RETURN CFI_RESTORE_STATE first_nmi: - /* - * Because nested NMIs will use the pushed location that we - * stored in rdx, we must keep that space available. - * Here's what our stack frame will look like: - * +-------------------------+ - * | original SS | - * | original Return RSP | - * | original RFLAGS | - * | original CS | - * | original RIP | - * +-------------------------+ - * | temp storage for rdx | - * +-------------------------+ - * | NMI executing variable | - * +-------------------------+ - * | copied SS | - * | copied Return RSP | - * | copied RFLAGS | - * | copied CS | - * | copied RIP | - * +-------------------------+ - * | Saved SS | - * | Saved Return RSP | - * | Saved RFLAGS | - * | Saved CS | - * | Saved RIP | - * +-------------------------+ - * | pt_regs | - * +-------------------------+ - * - * The saved stack frame is used to fix up the copied stack frame - * that a nested NMI may change to make the interrupted NMI iret jump - * to the repeat_nmi. The original stack frame and the temp storage - * is also used by nested NMIs and can not be trusted on exit. - */ - /* Do not pop rdx, nested NMIs will corrupt that part of the stack */ + /* Restore rdx. */ movq (%rsp), %rdx CFI_RESTORE rdx - /* Set the NMI executing variable on the stack. */ + /* Set "NMI executing" on the stack. */ pushq_cfi $1 - /* - * Leave room for the "copied" frame - */ + /* Leave room for the "iret" frame */ subq $(5*8), %rsp CFI_ADJUST_CFA_OFFSET 5*8 - /* Copy the stack frame to the Saved frame */ + /* Copy the "original" frame to the "outermost" frame */ .rept 5 pushq_cfi 11*8(%rsp) .endr @@ -1560,6 +1637,7 @@ first_nmi: /* Everything up to here is safe from nested NMIs */ +repeat_nmi: /* * If there was a nested NMI, the first NMI's iret will return * here. But NMIs are still enabled and we can take another @@ -1568,16 +1646,21 @@ first_nmi: * it will just return, as we are about to repeat an NMI anyway. * This makes it safe to copy to the stack frame that a nested * NMI will update. - */ -repeat_nmi: - /* - * Update the stack variable to say we are still in NMI (the update - * is benign for the non-repeat case, where 1 was pushed just above - * to this very stack slot). + * + * RSP is pointing to "outermost RIP". gsbase is unknown, but, if + * we're repeating an NMI, gsbase has the same value that it had on + * the first iteration. paranoid_entry will load the kernel + * gsbase if needed before we call do_nmi. + * + * Set "NMI executing" in case we came back here via IRET. */ movq $1, 10*8(%rsp) - /* Make another copy, this one may be modified by nested NMIs */ + /* + * Copy the "outermost" frame to the "iret" frame. NMIs that nest + * here must not modify the "iret" frame while we're writing to + * it or it will end up containing garbage. + */ addq $(10*8), %rsp CFI_ADJUST_CFA_OFFSET -10*8 .rept 5 @@ -1588,9 +1671,9 @@ repeat_nmi: end_repeat_nmi: /* - * Everything below this point can be preempted by a nested - * NMI if the first NMI took an exception and reset our iret stack - * so that we repeat another NMI. + * Everything below this point can be preempted by a nested NMI. + * If this happens, then the inner NMI will change the "iret" + * frame to point back to repeat_nmi. */ pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ ALLOC_PT_GPREGS_ON_STACK @@ -1605,29 +1688,11 @@ end_repeat_nmi: call paranoid_entry DEFAULT_FRAME 0 - /* - * Save off the CR2 register. If we take a page fault in the NMI then - * it could corrupt the CR2 value. If the NMI preempts a page fault - * handler before it was able to read the CR2 register, and then the - * NMI itself takes a page fault, the page fault that was preempted - * will read the information from the NMI page fault and not the - * origin fault. Save it off and restore it if it changes. - * Use the r12 callee-saved register. - */ - movq %cr2, %r12 - /* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */ movq %rsp,%rdi movq $-1,%rsi call do_nmi - /* Did the NMI take a page fault? Restore cr2 if it did */ - movq %cr2, %rcx - cmpq %rcx, %r12 - je 1f - movq %r12, %cr2 -1: - testl %ebx,%ebx /* swapgs needed? */ jnz nmi_restore nmi_swapgs: @@ -1635,12 +1700,27 @@ nmi_swapgs: nmi_restore: RESTORE_EXTRA_REGS RESTORE_C_REGS - /* Pop the extra iret frame at once */ + + /* Point RSP at the "iret" frame. */ REMOVE_PT_GPREGS_FROM_STACK 6*8 - /* Clear the NMI executing stack variable */ - movq $0, 5*8(%rsp) - jmp irq_return + /* + * Clear "NMI executing". Set DF first so that we can easily + * distinguish the remaining code between here and IRET from + * the SYSCALL entry and exit paths. On a native kernel, we + * could just inspect RIP, but, on paravirt kernels, + * INTERRUPT_RETURN can translate into a jump into a + * hypercall page. + */ + std + movq $0, 5*8(%rsp) /* clear "NMI executing" */ + + /* + * INTERRUPT_RETURN reads the "iret" frame and exits the NMI + * stack in a single instruction. We are returning to kernel + * mode, so this cannot result in a fault. + */ + INTERRUPT_RETURN CFI_ENDPROC END(nmi) diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index c3e985d17..d05bd2e2e 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -408,15 +408,15 @@ static void default_do_nmi(struct pt_regs *regs) NOKPROBE_SYMBOL(default_do_nmi); /* - * NMIs can hit breakpoints which will cause it to lose its - * NMI context with the CPU when the breakpoint does an iret. - */ -#ifdef CONFIG_X86_32 -/* - * For i386, NMIs use the same stack as the kernel, and we can - * add a workaround to the iret problem in C (preventing nested - * NMIs if an NMI takes a trap). Simply have 3 states the NMI - * can be in: + * NMIs can page fault or hit breakpoints which will cause it to lose + * its NMI context with the CPU when the breakpoint or page fault does an IRET. + * + * As a result, NMIs can nest if NMIs get unmasked due an IRET during + * NMI processing. On x86_64, the asm glue protects us from nested NMIs + * if the outer NMI came from kernel mode, but we can still nest if the + * outer NMI came from user mode. + * + * To handle these nested NMIs, we have three states: * * 1) not running * 2) executing @@ -430,15 +430,14 @@ NOKPROBE_SYMBOL(default_do_nmi); * (Note, the latch is binary, thus multiple NMIs triggering, * when one is running, are ignored. Only one NMI is restarted.) * - * If an NMI hits a breakpoint that executes an iret, another - * NMI can preempt it. We do not want to allow this new NMI - * to run, but we want to execute it when the first one finishes. - * We set the state to "latched", and the exit of the first NMI will - * perform a dec_return, if the result is zero (NOT_RUNNING), then - * it will simply exit the NMI handler. If not, the dec_return - * would have set the state to NMI_EXECUTING (what we want it to - * be when we are running). In this case, we simply jump back - * to rerun the NMI handler again, and restart the 'latched' NMI. + * If an NMI executes an iret, another NMI can preempt it. We do not + * want to allow this new NMI to run, but we want to execute it when the + * first one finishes. We set the state to "latched", and the exit of + * the first NMI will perform a dec_return, if the result is zero + * (NOT_RUNNING), then it will simply exit the NMI handler. If not, the + * dec_return would have set the state to NMI_EXECUTING (what we want it + * to be when we are running). In this case, we simply jump back to + * rerun the NMI handler again, and restart the 'latched' NMI. * * No trap (breakpoint or page fault) should be hit before nmi_restart, * thus there is no race between the first check of state for NOT_RUNNING @@ -461,49 +460,36 @@ enum nmi_states { static DEFINE_PER_CPU(enum nmi_states, nmi_state); static DEFINE_PER_CPU(unsigned long, nmi_cr2); -#define nmi_nesting_preprocess(regs) \ - do { \ - if (this_cpu_read(nmi_state) != NMI_NOT_RUNNING) { \ - this_cpu_write(nmi_state, NMI_LATCHED); \ - return; \ - } \ - this_cpu_write(nmi_state, NMI_EXECUTING); \ - this_cpu_write(nmi_cr2, read_cr2()); \ - } while (0); \ - nmi_restart: - -#define nmi_nesting_postprocess() \ - do { \ - if (unlikely(this_cpu_read(nmi_cr2) != read_cr2())) \ - write_cr2(this_cpu_read(nmi_cr2)); \ - if (this_cpu_dec_return(nmi_state)) \ - goto nmi_restart; \ - } while (0) -#else /* x86_64 */ +#ifdef CONFIG_X86_64 /* - * In x86_64 things are a bit more difficult. This has the same problem - * where an NMI hitting a breakpoint that calls iret will remove the - * NMI context, allowing a nested NMI to enter. What makes this more - * difficult is that both NMIs and breakpoints have their own stack. - * When a new NMI or breakpoint is executed, the stack is set to a fixed - * point. If an NMI is nested, it will have its stack set at that same - * fixed address that the first NMI had, and will start corrupting the - * stack. This is handled in entry_64.S, but the same problem exists with - * the breakpoint stack. + * In x86_64, we need to handle breakpoint -> NMI -> breakpoint. Without + * some care, the inner breakpoint will clobber the outer breakpoint's + * stack. * - * If a breakpoint is being processed, and the debug stack is being used, - * if an NMI comes in and also hits a breakpoint, the stack pointer - * will be set to the same fixed address as the breakpoint that was - * interrupted, causing that stack to be corrupted. To handle this case, - * check if the stack that was interrupted is the debug stack, and if - * so, change the IDT so that new breakpoints will use the current stack - * and not switch to the fixed address. On return of the NMI, switch back - * to the original IDT. + * If a breakpoint is being processed, and the debug stack is being + * used, if an NMI comes in and also hits a breakpoint, the stack + * pointer will be set to the same fixed address as the breakpoint that + * was interrupted, causing that stack to be corrupted. To handle this + * case, check if the stack that was interrupted is the debug stack, and + * if so, change the IDT so that new breakpoints will use the current + * stack and not switch to the fixed address. On return of the NMI, + * switch back to the original IDT. */ static DEFINE_PER_CPU(int, update_debug_stack); +#endif -static inline void nmi_nesting_preprocess(struct pt_regs *regs) +dotraplinkage notrace void +do_nmi(struct pt_regs *regs, long error_code) { + if (this_cpu_read(nmi_state) != NMI_NOT_RUNNING) { + this_cpu_write(nmi_state, NMI_LATCHED); + return; + } + this_cpu_write(nmi_state, NMI_EXECUTING); + this_cpu_write(nmi_cr2, read_cr2()); +nmi_restart: + +#ifdef CONFIG_X86_64 /* * If we interrupted a breakpoint, it is possible that * the nmi handler will have breakpoints too. We need to @@ -514,22 +500,8 @@ static inline void nmi_nesting_preprocess(struct pt_regs *regs) debug_stack_set_zero(); this_cpu_write(update_debug_stack, 1); } -} - -static inline void nmi_nesting_postprocess(void) -{ - if (unlikely(this_cpu_read(update_debug_stack))) { - debug_stack_reset(); - this_cpu_write(update_debug_stack, 0); - } -} #endif -dotraplinkage notrace void -do_nmi(struct pt_regs *regs, long error_code) -{ - nmi_nesting_preprocess(regs); - nmi_enter(); inc_irq_stat(__nmi_count); @@ -539,8 +511,17 @@ do_nmi(struct pt_regs *regs, long error_code) nmi_exit(); - /* On i386, may loop back to preprocess */ - nmi_nesting_postprocess(); +#ifdef CONFIG_X86_64 + if (unlikely(this_cpu_read(update_debug_stack))) { + debug_stack_reset(); + this_cpu_write(update_debug_stack, 0); + } +#endif + + if (unlikely(this_cpu_read(nmi_cr2) != read_cr2())) + write_cr2(this_cpu_read(nmi_cr2)); + if (this_cpu_dec_return(nmi_state)) + goto nmi_restart; } NOKPROBE_SYMBOL(do_nmi); diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h index 9d28383fc..c4ea87eed 100644 --- a/arch/x86/kvm/lapic.h +++ b/arch/x86/kvm/lapic.h @@ -150,7 +150,7 @@ static inline bool kvm_apic_vid_enabled(struct kvm *kvm) static inline bool kvm_apic_has_events(struct kvm_vcpu *vcpu) { - return vcpu->arch.apic->pending_events; + return kvm_vcpu_has_lapic(vcpu) && vcpu->arch.apic->pending_events; } bool kvm_apic_pending_eoi(struct kvm_vcpu *vcpu, int vector); diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 46957ead3..a671e8372 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -483,6 +483,7 @@ static void set_aliased_prot(void *v, pgprot_t prot) pte_t pte; unsigned long pfn; struct page *page; + unsigned char dummy; ptep = lookup_address((unsigned long)v, &level); BUG_ON(ptep == NULL); @@ -492,6 +493,32 @@ static void set_aliased_prot(void *v, pgprot_t prot) pte = pfn_pte(pfn, prot); + /* + * Careful: update_va_mapping() will fail if the virtual address + * we're poking isn't populated in the page tables. We don't + * need to worry about the direct map (that's always in the page + * tables), but we need to be careful about vmap space. In + * particular, the top level page table can lazily propagate + * entries between processes, so if we've switched mms since we + * vmapped the target in the first place, we might not have the + * top-level page table entry populated. + * + * We disable preemption because we want the same mm active when + * we probe the target and when we issue the hypercall. We'll + * have the same nominal mm, but if we're a kernel thread, lazy + * mm dropping could change our pgd. + * + * Out of an abundance of caution, this uses __get_user() to fault + * in the target address just in case there's some obscure case + * in which the target address isn't readable. + */ + + preempt_disable(); + + pagefault_disable(); /* Avoid warnings due to being atomic. */ + __get_user(dummy, (unsigned char __user __force *)v); + pagefault_enable(); + if (HYPERVISOR_update_va_mapping((unsigned long)v, pte, 0)) BUG(); @@ -503,6 +530,8 @@ static void set_aliased_prot(void *v, pgprot_t prot) BUG(); } else kmap_flush_unused(); + + preempt_enable(); } static void xen_alloc_ldt(struct desc_struct *ldt, unsigned entries) @@ -510,6 +539,17 @@ static void xen_alloc_ldt(struct desc_struct *ldt, unsigned entries) const unsigned entries_per_page = PAGE_SIZE / LDT_ENTRY_SIZE; int i; + /* + * We need to mark the all aliases of the LDT pages RO. We + * don't need to call vm_flush_aliases(), though, since that's + * only responsible for flushing aliases out the TLBs, not the + * page tables, and Xen will flush the TLB for us if needed. + * + * To avoid confusing future readers: none of this is necessary + * to load the LDT. The hypervisor only checks this when the + * LDT is faulted in due to subsequent descriptor access. + */ + for(i = 0; i < entries; i += entries_per_page) set_aliased_prot(ldt + i, PAGE_KERNEL_RO); } -- cgit v1.2.3