From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001
From: André Fabian Silva Delgado <emulatorman@parabola.nu>
Date: Wed, 5 Aug 2015 17:04:01 -0300
Subject: Initial import

---
 block/Kconfig | 127 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 127 insertions(+)
 create mode 100644 block/Kconfig

(limited to 'block/Kconfig')

diff --git a/block/Kconfig b/block/Kconfig
new file mode 100644
index 000000000..161491d0a
--- /dev/null
+++ b/block/Kconfig
@@ -0,0 +1,127 @@
+#
+# Block layer core configuration
+#
+menuconfig BLOCK
+       bool "Enable the block layer" if EXPERT
+       default y
+       help
+	 Provide block layer support for the kernel.
+
+	 Disable this option to remove the block layer support from the
+	 kernel. This may be useful for embedded devices.
+
+	 If this option is disabled:
+
+	   - block device files will become unusable
+	   - some filesystems (such as ext3) will become unavailable.
+
+	 Also, SCSI character devices and USB storage will be disabled since
+	 they make use of various block layer definitions and facilities.
+
+	 Say Y here unless you know you really don't want to mount disks and
+	 suchlike.
+
+if BLOCK
+
+config LBDAF
+	bool "Support for large (2TB+) block devices and files"
+	depends on !64BIT
+	default y
+	help
+	  Enable block devices or files of size 2TB and larger.
+
+	  This option is required to support the full capacity of large
+	  (2TB+) block devices, including RAID, disk, Network Block Device,
+	  Logical Volume Manager (LVM) and loopback.
+	
+	  This option also enables support for single files larger than
+	  2TB.
+
+	  The ext4 filesystem requires that this feature be enabled in
+	  order to support filesystems that have the huge_file feature
+	  enabled.  Otherwise, it will refuse to mount in the read-write
+	  mode any filesystems that use the huge_file feature, which is
+	  enabled by default by mke2fs.ext4.
+
+	  The GFS2 filesystem also requires this feature.
+
+	  If unsure, say Y.
+
+config BLK_DEV_BSG
+	bool "Block layer SG support v4"
+	default y
+	help
+	  Saying Y here will enable generic SG (SCSI generic) v4 support
+	  for any block device.
+
+	  Unlike SG v3 (aka block/scsi_ioctl.c drivers/scsi/sg.c), SG v4
+	  can handle complicated SCSI commands: tagged variable length cdbs
+	  with bidirectional data transfers and generic request/response
+	  protocols (e.g. Task Management Functions and SMP in Serial
+	  Attached SCSI).
+
+	  This option is required by recent UDEV versions to properly
+	  access device serial numbers, etc.
+
+	  If unsure, say Y.
+
+config BLK_DEV_BSGLIB
+	bool "Block layer SG support v4 helper lib"
+	default n
+	select BLK_DEV_BSG
+	help
+	  Subsystems will normally enable this if needed. Users will not
+	  normally need to manually enable this.
+
+	  If unsure, say N.
+
+config BLK_DEV_INTEGRITY
+	bool "Block layer data integrity support"
+	select CRC_T10DIF if BLK_DEV_INTEGRITY
+	---help---
+	Some storage devices allow extra information to be
+	stored/retrieved to help protect the data.  The block layer
+	data integrity option provides hooks which can be used by
+	filesystems to ensure better data integrity.
+
+	Say yes here if you have a storage device that provides the
+	T10/SCSI Data Integrity Field or the T13/ATA External Path
+	Protection.  If in doubt, say N.
+
+config BLK_DEV_THROTTLING
+	bool "Block layer bio throttling support"
+	depends on BLK_CGROUP=y
+	default n
+	---help---
+	Block layer bio throttling support. It can be used to limit
+	the IO rate to a device. IO rate policies are per cgroup and
+	one needs to mount and use blkio cgroup controller for creating
+	cgroups and specifying per device IO rate policies.
+
+	See Documentation/cgroups/blkio-controller.txt for more information.
+
+config BLK_CMDLINE_PARSER
+	bool "Block device command line partition parser"
+	default n
+	---help---
+	Enabling this option allows you to specify the partition layout from
+	the kernel boot args.  This is typically of use for embedded devices
+	which don't otherwise have any standardized method for listing the
+	partitions on a block device.
+
+	See Documentation/block/cmdline-partition.txt for more information.
+
+menu "Partition Types"
+
+source "block/partitions/Kconfig"
+
+endmenu
+
+endif # BLOCK
+
+config BLOCK_COMPAT
+	bool
+	depends on BLOCK && COMPAT
+	default y
+
+source block/Kconfig.iosched
-- 
cgit v1.2.3-54-g00ecf