From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?= Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/acpi/processor_idle.c | 1145 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1145 insertions(+) create mode 100644 drivers/acpi/processor_idle.c (limited to 'drivers/acpi/processor_idle.c') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c new file mode 100644 index 000000000..39e0c8e36 --- /dev/null +++ b/drivers/acpi/processor_idle.c @@ -0,0 +1,1145 @@ +/* + * processor_idle - idle state submodule to the ACPI processor driver + * + * Copyright (C) 2001, 2002 Andy Grover + * Copyright (C) 2001, 2002 Paul Diefenbaugh + * Copyright (C) 2004, 2005 Dominik Brodowski + * Copyright (C) 2004 Anil S Keshavamurthy + * - Added processor hotplug support + * Copyright (C) 2005 Venkatesh Pallipadi + * - Added support for C3 on SMP + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include +#include +#include +#include /* need_resched() */ +#include +#include +#include +#include + +/* + * Include the apic definitions for x86 to have the APIC timer related defines + * available also for UP (on SMP it gets magically included via linux/smp.h). + * asm/acpi.h is not an option, as it would require more include magic. Also + * creating an empty asm-ia64/apic.h would just trade pest vs. cholera. + */ +#ifdef CONFIG_X86 +#include +#endif + +#define PREFIX "ACPI: " + +#define ACPI_PROCESSOR_CLASS "processor" +#define _COMPONENT ACPI_PROCESSOR_COMPONENT +ACPI_MODULE_NAME("processor_idle"); + +static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER; +module_param(max_cstate, uint, 0000); +static unsigned int nocst __read_mostly; +module_param(nocst, uint, 0000); +static int bm_check_disable __read_mostly; +module_param(bm_check_disable, uint, 0000); + +static unsigned int latency_factor __read_mostly = 2; +module_param(latency_factor, uint, 0644); + +static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device); + +static DEFINE_PER_CPU(struct acpi_processor_cx * [CPUIDLE_STATE_MAX], + acpi_cstate); + +static int disabled_by_idle_boot_param(void) +{ + return boot_option_idle_override == IDLE_POLL || + boot_option_idle_override == IDLE_HALT; +} + +/* + * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3. + * For now disable this. Probably a bug somewhere else. + * + * To skip this limit, boot/load with a large max_cstate limit. + */ +static int set_max_cstate(const struct dmi_system_id *id) +{ + if (max_cstate > ACPI_PROCESSOR_MAX_POWER) + return 0; + + printk(KERN_NOTICE PREFIX "%s detected - limiting to C%ld max_cstate." + " Override with \"processor.max_cstate=%d\"\n", id->ident, + (long)id->driver_data, ACPI_PROCESSOR_MAX_POWER + 1); + + max_cstate = (long)id->driver_data; + + return 0; +} + +static struct dmi_system_id processor_power_dmi_table[] = { + { set_max_cstate, "Clevo 5600D", { + DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")}, + (void *)2}, + { set_max_cstate, "Pavilion zv5000", { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME,"Pavilion zv5000 (DS502A#ABA)")}, + (void *)1}, + { set_max_cstate, "Asus L8400B", { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME,"L8400B series Notebook PC")}, + (void *)1}, + {}, +}; + + +/* + * Callers should disable interrupts before the call and enable + * interrupts after return. + */ +static void acpi_safe_halt(void) +{ + if (!tif_need_resched()) { + safe_halt(); + local_irq_disable(); + } +} + +#ifdef ARCH_APICTIMER_STOPS_ON_C3 + +/* + * Some BIOS implementations switch to C3 in the published C2 state. + * This seems to be a common problem on AMD boxen, but other vendors + * are affected too. We pick the most conservative approach: we assume + * that the local APIC stops in both C2 and C3. + */ +static void lapic_timer_check_state(int state, struct acpi_processor *pr, + struct acpi_processor_cx *cx) +{ + struct acpi_processor_power *pwr = &pr->power; + u8 type = local_apic_timer_c2_ok ? ACPI_STATE_C3 : ACPI_STATE_C2; + + if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT)) + return; + + if (amd_e400_c1e_detected) + type = ACPI_STATE_C1; + + /* + * Check, if one of the previous states already marked the lapic + * unstable + */ + if (pwr->timer_broadcast_on_state < state) + return; + + if (cx->type >= type) + pr->power.timer_broadcast_on_state = state; +} + +static void __lapic_timer_propagate_broadcast(void *arg) +{ + struct acpi_processor *pr = (struct acpi_processor *) arg; + + if (pr->power.timer_broadcast_on_state < INT_MAX) + tick_broadcast_enable(); + else + tick_broadcast_disable(); +} + +static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) +{ + smp_call_function_single(pr->id, __lapic_timer_propagate_broadcast, + (void *)pr, 1); +} + +/* Power(C) State timer broadcast control */ +static void lapic_timer_state_broadcast(struct acpi_processor *pr, + struct acpi_processor_cx *cx, + int broadcast) +{ + int state = cx - pr->power.states; + + if (state >= pr->power.timer_broadcast_on_state) { + if (broadcast) + tick_broadcast_enter(); + else + tick_broadcast_exit(); + } +} + +#else + +static void lapic_timer_check_state(int state, struct acpi_processor *pr, + struct acpi_processor_cx *cstate) { } +static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { } +static void lapic_timer_state_broadcast(struct acpi_processor *pr, + struct acpi_processor_cx *cx, + int broadcast) +{ +} + +#endif + +#ifdef CONFIG_PM_SLEEP +static u32 saved_bm_rld; + +static int acpi_processor_suspend(void) +{ + acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); + return 0; +} + +static void acpi_processor_resume(void) +{ + u32 resumed_bm_rld = 0; + + acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld); + if (resumed_bm_rld == saved_bm_rld) + return; + + acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); +} + +static struct syscore_ops acpi_processor_syscore_ops = { + .suspend = acpi_processor_suspend, + .resume = acpi_processor_resume, +}; + +void acpi_processor_syscore_init(void) +{ + register_syscore_ops(&acpi_processor_syscore_ops); +} + +void acpi_processor_syscore_exit(void) +{ + unregister_syscore_ops(&acpi_processor_syscore_ops); +} +#endif /* CONFIG_PM_SLEEP */ + +#if defined(CONFIG_X86) +static void tsc_check_state(int state) +{ + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + case X86_VENDOR_INTEL: + /* + * AMD Fam10h TSC will tick in all + * C/P/S0/S1 states when this bit is set. + */ + if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) + return; + + /*FALL THROUGH*/ + default: + /* TSC could halt in idle, so notify users */ + if (state > ACPI_STATE_C1) + mark_tsc_unstable("TSC halts in idle"); + } +} +#else +static void tsc_check_state(int state) { return; } +#endif + +static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) +{ + + if (!pr->pblk) + return -ENODEV; + + /* if info is obtained from pblk/fadt, type equals state */ + pr->power.states[ACPI_STATE_C2].type = ACPI_STATE_C2; + pr->power.states[ACPI_STATE_C3].type = ACPI_STATE_C3; + +#ifndef CONFIG_HOTPLUG_CPU + /* + * Check for P_LVL2_UP flag before entering C2 and above on + * an SMP system. + */ + if ((num_online_cpus() > 1) && + !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) + return -ENODEV; +#endif + + /* determine C2 and C3 address from pblk */ + pr->power.states[ACPI_STATE_C2].address = pr->pblk + 4; + pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5; + + /* determine latencies from FADT */ + pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.c2_latency; + pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.c3_latency; + + /* + * FADT specified C2 latency must be less than or equal to + * 100 microseconds. + */ + if (acpi_gbl_FADT.c2_latency > ACPI_PROCESSOR_MAX_C2_LATENCY) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "C2 latency too large [%d]\n", acpi_gbl_FADT.c2_latency)); + /* invalidate C2 */ + pr->power.states[ACPI_STATE_C2].address = 0; + } + + /* + * FADT supplied C3 latency must be less than or equal to + * 1000 microseconds. + */ + if (acpi_gbl_FADT.c3_latency > ACPI_PROCESSOR_MAX_C3_LATENCY) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "C3 latency too large [%d]\n", acpi_gbl_FADT.c3_latency)); + /* invalidate C3 */ + pr->power.states[ACPI_STATE_C3].address = 0; + } + + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "lvl2[0x%08x] lvl3[0x%08x]\n", + pr->power.states[ACPI_STATE_C2].address, + pr->power.states[ACPI_STATE_C3].address)); + + return 0; +} + +static int acpi_processor_get_power_info_default(struct acpi_processor *pr) +{ + if (!pr->power.states[ACPI_STATE_C1].valid) { + /* set the first C-State to C1 */ + /* all processors need to support C1 */ + pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1; + pr->power.states[ACPI_STATE_C1].valid = 1; + pr->power.states[ACPI_STATE_C1].entry_method = ACPI_CSTATE_HALT; + } + /* the C0 state only exists as a filler in our array */ + pr->power.states[ACPI_STATE_C0].valid = 1; + return 0; +} + +static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) +{ + acpi_status status; + u64 count; + int current_count; + int i, ret = 0; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *cst; + + + if (nocst) + return -ENODEV; + + current_count = 0; + + status = acpi_evaluate_object(pr->handle, "_CST", NULL, &buffer); + if (ACPI_FAILURE(status)) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No _CST, giving up\n")); + return -ENODEV; + } + + cst = buffer.pointer; + + /* There must be at least 2 elements */ + if (!cst || (cst->type != ACPI_TYPE_PACKAGE) || cst->package.count < 2) { + printk(KERN_ERR PREFIX "not enough elements in _CST\n"); + ret = -EFAULT; + goto end; + } + + count = cst->package.elements[0].integer.value; + + /* Validate number of power states. */ + if (count < 1 || count != cst->package.count - 1) { + printk(KERN_ERR PREFIX "count given by _CST is not valid\n"); + ret = -EFAULT; + goto end; + } + + /* Tell driver that at least _CST is supported. */ + pr->flags.has_cst = 1; + + for (i = 1; i <= count; i++) { + union acpi_object *element; + union acpi_object *obj; + struct acpi_power_register *reg; + struct acpi_processor_cx cx; + + memset(&cx, 0, sizeof(cx)); + + element = &(cst->package.elements[i]); + if (element->type != ACPI_TYPE_PACKAGE) + continue; + + if (element->package.count != 4) + continue; + + obj = &(element->package.elements[0]); + + if (obj->type != ACPI_TYPE_BUFFER) + continue; + + reg = (struct acpi_power_register *)obj->buffer.pointer; + + if (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO && + (reg->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) + continue; + + /* There should be an easy way to extract an integer... */ + obj = &(element->package.elements[1]); + if (obj->type != ACPI_TYPE_INTEGER) + continue; + + cx.type = obj->integer.value; + /* + * Some buggy BIOSes won't list C1 in _CST - + * Let acpi_processor_get_power_info_default() handle them later + */ + if (i == 1 && cx.type != ACPI_STATE_C1) + current_count++; + + cx.address = reg->address; + cx.index = current_count + 1; + + cx.entry_method = ACPI_CSTATE_SYSTEMIO; + if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) { + if (acpi_processor_ffh_cstate_probe + (pr->id, &cx, reg) == 0) { + cx.entry_method = ACPI_CSTATE_FFH; + } else if (cx.type == ACPI_STATE_C1) { + /* + * C1 is a special case where FIXED_HARDWARE + * can be handled in non-MWAIT way as well. + * In that case, save this _CST entry info. + * Otherwise, ignore this info and continue. + */ + cx.entry_method = ACPI_CSTATE_HALT; + snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI HLT"); + } else { + continue; + } + if (cx.type == ACPI_STATE_C1 && + (boot_option_idle_override == IDLE_NOMWAIT)) { + /* + * In most cases the C1 space_id obtained from + * _CST object is FIXED_HARDWARE access mode. + * But when the option of idle=halt is added, + * the entry_method type should be changed from + * CSTATE_FFH to CSTATE_HALT. + * When the option of idle=nomwait is added, + * the C1 entry_method type should be + * CSTATE_HALT. + */ + cx.entry_method = ACPI_CSTATE_HALT; + snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI HLT"); + } + } else { + snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI IOPORT 0x%x", + cx.address); + } + + if (cx.type == ACPI_STATE_C1) { + cx.valid = 1; + } + + obj = &(element->package.elements[2]); + if (obj->type != ACPI_TYPE_INTEGER) + continue; + + cx.latency = obj->integer.value; + + obj = &(element->package.elements[3]); + if (obj->type != ACPI_TYPE_INTEGER) + continue; + + current_count++; + memcpy(&(pr->power.states[current_count]), &cx, sizeof(cx)); + + /* + * We support total ACPI_PROCESSOR_MAX_POWER - 1 + * (From 1 through ACPI_PROCESSOR_MAX_POWER - 1) + */ + if (current_count >= (ACPI_PROCESSOR_MAX_POWER - 1)) { + printk(KERN_WARNING + "Limiting number of power states to max (%d)\n", + ACPI_PROCESSOR_MAX_POWER); + printk(KERN_WARNING + "Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n"); + break; + } + } + + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d power states\n", + current_count)); + + /* Validate number of power states discovered */ + if (current_count < 2) + ret = -EFAULT; + + end: + kfree(buffer.pointer); + + return ret; +} + +static void acpi_processor_power_verify_c3(struct acpi_processor *pr, + struct acpi_processor_cx *cx) +{ + static int bm_check_flag = -1; + static int bm_control_flag = -1; + + + if (!cx->address) + return; + + /* + * PIIX4 Erratum #18: We don't support C3 when Type-F (fast) + * DMA transfers are used by any ISA device to avoid livelock. + * Note that we could disable Type-F DMA (as recommended by + * the erratum), but this is known to disrupt certain ISA + * devices thus we take the conservative approach. + */ + else if (errata.piix4.fdma) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "C3 not supported on PIIX4 with Type-F DMA\n")); + return; + } + + /* All the logic here assumes flags.bm_check is same across all CPUs */ + if (bm_check_flag == -1) { + /* Determine whether bm_check is needed based on CPU */ + acpi_processor_power_init_bm_check(&(pr->flags), pr->id); + bm_check_flag = pr->flags.bm_check; + bm_control_flag = pr->flags.bm_control; + } else { + pr->flags.bm_check = bm_check_flag; + pr->flags.bm_control = bm_control_flag; + } + + if (pr->flags.bm_check) { + if (!pr->flags.bm_control) { + if (pr->flags.has_cst != 1) { + /* bus mastering control is necessary */ + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "C3 support requires BM control\n")); + return; + } else { + /* Here we enter C3 without bus mastering */ + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "C3 support without BM control\n")); + } + } + } else { + /* + * WBINVD should be set in fadt, for C3 state to be + * supported on when bm_check is not required. + */ + if (!(acpi_gbl_FADT.flags & ACPI_FADT_WBINVD)) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Cache invalidation should work properly" + " for C3 to be enabled on SMP systems\n")); + return; + } + } + + /* + * Otherwise we've met all of our C3 requirements. + * Normalize the C3 latency to expidite policy. Enable + * checking of bus mastering status (bm_check) so we can + * use this in our C3 policy + */ + cx->valid = 1; + + /* + * On older chipsets, BM_RLD needs to be set + * in order for Bus Master activity to wake the + * system from C3. Newer chipsets handle DMA + * during C3 automatically and BM_RLD is a NOP. + * In either case, the proper way to + * handle BM_RLD is to set it and leave it set. + */ + acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 1); + + return; +} + +static int acpi_processor_power_verify(struct acpi_processor *pr) +{ + unsigned int i; + unsigned int working = 0; + + pr->power.timer_broadcast_on_state = INT_MAX; + + for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { + struct acpi_processor_cx *cx = &pr->power.states[i]; + + switch (cx->type) { + case ACPI_STATE_C1: + cx->valid = 1; + break; + + case ACPI_STATE_C2: + if (!cx->address) + break; + cx->valid = 1; + break; + + case ACPI_STATE_C3: + acpi_processor_power_verify_c3(pr, cx); + break; + } + if (!cx->valid) + continue; + + lapic_timer_check_state(i, pr, cx); + tsc_check_state(cx->type); + working++; + } + + lapic_timer_propagate_broadcast(pr); + + return (working); +} + +static int acpi_processor_get_power_info(struct acpi_processor *pr) +{ + unsigned int i; + int result; + + + /* NOTE: the idle thread may not be running while calling + * this function */ + + /* Zero initialize all the C-states info. */ + memset(pr->power.states, 0, sizeof(pr->power.states)); + + result = acpi_processor_get_power_info_cst(pr); + if (result == -ENODEV) + result = acpi_processor_get_power_info_fadt(pr); + + if (result) + return result; + + acpi_processor_get_power_info_default(pr); + + pr->power.count = acpi_processor_power_verify(pr); + + /* + * if one state of type C2 or C3 is available, mark this + * CPU as being "idle manageable" + */ + for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { + if (pr->power.states[i].valid) { + pr->power.count = i; + if (pr->power.states[i].type >= ACPI_STATE_C2) + pr->flags.power = 1; + } + } + + return 0; +} + +/** + * acpi_idle_bm_check - checks if bus master activity was detected + */ +static int acpi_idle_bm_check(void) +{ + u32 bm_status = 0; + + if (bm_check_disable) + return 0; + + acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status); + if (bm_status) + acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, 1); + /* + * PIIX4 Erratum #18: Note that BM_STS doesn't always reflect + * the true state of bus mastering activity; forcing us to + * manually check the BMIDEA bit of each IDE channel. + */ + else if (errata.piix4.bmisx) { + if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01) + || (inb_p(errata.piix4.bmisx + 0x0A) & 0x01)) + bm_status = 1; + } + return bm_status; +} + +/** + * acpi_idle_do_entry - enter idle state using the appropriate method + * @cx: cstate data + * + * Caller disables interrupt before call and enables interrupt after return. + */ +static void acpi_idle_do_entry(struct acpi_processor_cx *cx) +{ + if (cx->entry_method == ACPI_CSTATE_FFH) { + /* Call into architectural FFH based C-state */ + acpi_processor_ffh_cstate_enter(cx); + } else if (cx->entry_method == ACPI_CSTATE_HALT) { + acpi_safe_halt(); + } else { + /* IO port based C-state */ + inb(cx->address); + /* Dummy wait op - must do something useless after P_LVL2 read + because chipsets cannot guarantee that STPCLK# signal + gets asserted in time to freeze execution properly. */ + inl(acpi_gbl_FADT.xpm_timer_block.address); + } +} + +/** + * acpi_idle_play_dead - enters an ACPI state for long-term idle (i.e. off-lining) + * @dev: the target CPU + * @index: the index of suggested state + */ +static int acpi_idle_play_dead(struct cpuidle_device *dev, int index) +{ + struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu); + + ACPI_FLUSH_CPU_CACHE(); + + while (1) { + + if (cx->entry_method == ACPI_CSTATE_HALT) + safe_halt(); + else if (cx->entry_method == ACPI_CSTATE_SYSTEMIO) { + inb(cx->address); + /* See comment in acpi_idle_do_entry() */ + inl(acpi_gbl_FADT.xpm_timer_block.address); + } else + return -ENODEV; + } + + /* Never reached */ + return 0; +} + +static bool acpi_idle_fallback_to_c1(struct acpi_processor *pr) +{ + return IS_ENABLED(CONFIG_HOTPLUG_CPU) && !pr->flags.has_cst && + !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED); +} + +static int c3_cpu_count; +static DEFINE_RAW_SPINLOCK(c3_lock); + +/** + * acpi_idle_enter_bm - enters C3 with proper BM handling + * @pr: Target processor + * @cx: Target state context + * @timer_bc: Whether or not to change timer mode to broadcast + */ +static void acpi_idle_enter_bm(struct acpi_processor *pr, + struct acpi_processor_cx *cx, bool timer_bc) +{ + acpi_unlazy_tlb(smp_processor_id()); + + /* + * Must be done before busmaster disable as we might need to + * access HPET ! + */ + if (timer_bc) + lapic_timer_state_broadcast(pr, cx, 1); + + /* + * disable bus master + * bm_check implies we need ARB_DIS + * bm_control implies whether we can do ARB_DIS + * + * That leaves a case where bm_check is set and bm_control is + * not set. In that case we cannot do much, we enter C3 + * without doing anything. + */ + if (pr->flags.bm_control) { + raw_spin_lock(&c3_lock); + c3_cpu_count++; + /* Disable bus master arbitration when all CPUs are in C3 */ + if (c3_cpu_count == num_online_cpus()) + acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1); + raw_spin_unlock(&c3_lock); + } + + acpi_idle_do_entry(cx); + + /* Re-enable bus master arbitration */ + if (pr->flags.bm_control) { + raw_spin_lock(&c3_lock); + acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0); + c3_cpu_count--; + raw_spin_unlock(&c3_lock); + } + + if (timer_bc) + lapic_timer_state_broadcast(pr, cx, 0); +} + +static int acpi_idle_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu); + struct acpi_processor *pr; + + pr = __this_cpu_read(processors); + if (unlikely(!pr)) + return -EINVAL; + + if (cx->type != ACPI_STATE_C1) { + if (acpi_idle_fallback_to_c1(pr) && num_online_cpus() > 1) { + index = CPUIDLE_DRIVER_STATE_START; + cx = per_cpu(acpi_cstate[index], dev->cpu); + } else if (cx->type == ACPI_STATE_C3 && pr->flags.bm_check) { + if (cx->bm_sts_skip || !acpi_idle_bm_check()) { + acpi_idle_enter_bm(pr, cx, true); + return index; + } else if (drv->safe_state_index >= 0) { + index = drv->safe_state_index; + cx = per_cpu(acpi_cstate[index], dev->cpu); + } else { + acpi_safe_halt(); + return -EBUSY; + } + } + } + + lapic_timer_state_broadcast(pr, cx, 1); + + if (cx->type == ACPI_STATE_C3) + ACPI_FLUSH_CPU_CACHE(); + + acpi_idle_do_entry(cx); + + lapic_timer_state_broadcast(pr, cx, 0); + + return index; +} + +static void acpi_idle_enter_freeze(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu); + + if (cx->type == ACPI_STATE_C3) { + struct acpi_processor *pr = __this_cpu_read(processors); + + if (unlikely(!pr)) + return; + + if (pr->flags.bm_check) { + acpi_idle_enter_bm(pr, cx, false); + return; + } else { + ACPI_FLUSH_CPU_CACHE(); + } + } + acpi_idle_do_entry(cx); +} + +struct cpuidle_driver acpi_idle_driver = { + .name = "acpi_idle", + .owner = THIS_MODULE, +}; + +/** + * acpi_processor_setup_cpuidle_cx - prepares and configures CPUIDLE + * device i.e. per-cpu data + * + * @pr: the ACPI processor + * @dev : the cpuidle device + */ +static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr, + struct cpuidle_device *dev) +{ + int i, count = CPUIDLE_DRIVER_STATE_START; + struct acpi_processor_cx *cx; + + if (!pr->flags.power_setup_done) + return -EINVAL; + + if (pr->flags.power == 0) { + return -EINVAL; + } + + if (!dev) + return -EINVAL; + + dev->cpu = pr->id; + + if (max_cstate == 0) + max_cstate = 1; + + for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { + cx = &pr->power.states[i]; + + if (!cx->valid) + continue; + + per_cpu(acpi_cstate[count], dev->cpu) = cx; + + count++; + if (count == CPUIDLE_STATE_MAX) + break; + } + + if (!count) + return -EINVAL; + + return 0; +} + +/** + * acpi_processor_setup_cpuidle states- prepares and configures cpuidle + * global state data i.e. idle routines + * + * @pr: the ACPI processor + */ +static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr) +{ + int i, count = CPUIDLE_DRIVER_STATE_START; + struct acpi_processor_cx *cx; + struct cpuidle_state *state; + struct cpuidle_driver *drv = &acpi_idle_driver; + + if (!pr->flags.power_setup_done) + return -EINVAL; + + if (pr->flags.power == 0) + return -EINVAL; + + drv->safe_state_index = -1; + for (i = CPUIDLE_DRIVER_STATE_START; i < CPUIDLE_STATE_MAX; i++) { + drv->states[i].name[0] = '\0'; + drv->states[i].desc[0] = '\0'; + } + + if (max_cstate == 0) + max_cstate = 1; + + for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { + cx = &pr->power.states[i]; + + if (!cx->valid) + continue; + + state = &drv->states[count]; + snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i); + strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN); + state->exit_latency = cx->latency; + state->target_residency = cx->latency * latency_factor; + state->enter = acpi_idle_enter; + + state->flags = 0; + if (cx->type == ACPI_STATE_C1 || cx->type == ACPI_STATE_C2) { + state->enter_dead = acpi_idle_play_dead; + drv->safe_state_index = count; + } + /* + * Halt-induced C1 is not good for ->enter_freeze, because it + * re-enables interrupts on exit. Moreover, C1 is generally not + * particularly interesting from the suspend-to-idle angle, so + * avoid C1 and the situations in which we may need to fall back + * to it altogether. + */ + if (cx->type != ACPI_STATE_C1 && !acpi_idle_fallback_to_c1(pr)) + state->enter_freeze = acpi_idle_enter_freeze; + + count++; + if (count == CPUIDLE_STATE_MAX) + break; + } + + drv->state_count = count; + + if (!count) + return -EINVAL; + + return 0; +} + +int acpi_processor_hotplug(struct acpi_processor *pr) +{ + int ret = 0; + struct cpuidle_device *dev; + + if (disabled_by_idle_boot_param()) + return 0; + + if (nocst) + return -ENODEV; + + if (!pr->flags.power_setup_done) + return -ENODEV; + + dev = per_cpu(acpi_cpuidle_device, pr->id); + cpuidle_pause_and_lock(); + cpuidle_disable_device(dev); + acpi_processor_get_power_info(pr); + if (pr->flags.power) { + acpi_processor_setup_cpuidle_cx(pr, dev); + ret = cpuidle_enable_device(dev); + } + cpuidle_resume_and_unlock(); + + return ret; +} + +int acpi_processor_cst_has_changed(struct acpi_processor *pr) +{ + int cpu; + struct acpi_processor *_pr; + struct cpuidle_device *dev; + + if (disabled_by_idle_boot_param()) + return 0; + + if (nocst) + return -ENODEV; + + if (!pr->flags.power_setup_done) + return -ENODEV; + + /* + * FIXME: Design the ACPI notification to make it once per + * system instead of once per-cpu. This condition is a hack + * to make the code that updates C-States be called once. + */ + + if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) { + + /* Protect against cpu-hotplug */ + get_online_cpus(); + cpuidle_pause_and_lock(); + + /* Disable all cpuidle devices */ + for_each_online_cpu(cpu) { + _pr = per_cpu(processors, cpu); + if (!_pr || !_pr->flags.power_setup_done) + continue; + dev = per_cpu(acpi_cpuidle_device, cpu); + cpuidle_disable_device(dev); + } + + /* Populate Updated C-state information */ + acpi_processor_get_power_info(pr); + acpi_processor_setup_cpuidle_states(pr); + + /* Enable all cpuidle devices */ + for_each_online_cpu(cpu) { + _pr = per_cpu(processors, cpu); + if (!_pr || !_pr->flags.power_setup_done) + continue; + acpi_processor_get_power_info(_pr); + if (_pr->flags.power) { + dev = per_cpu(acpi_cpuidle_device, cpu); + acpi_processor_setup_cpuidle_cx(_pr, dev); + cpuidle_enable_device(dev); + } + } + cpuidle_resume_and_unlock(); + put_online_cpus(); + } + + return 0; +} + +static int acpi_processor_registered; + +int acpi_processor_power_init(struct acpi_processor *pr) +{ + acpi_status status; + int retval; + struct cpuidle_device *dev; + static int first_run; + + if (disabled_by_idle_boot_param()) + return 0; + + if (!first_run) { + dmi_check_system(processor_power_dmi_table); + max_cstate = acpi_processor_cstate_check(max_cstate); + if (max_cstate < ACPI_C_STATES_MAX) + printk(KERN_NOTICE + "ACPI: processor limited to max C-state %d\n", + max_cstate); + first_run++; + } + + if (acpi_gbl_FADT.cst_control && !nocst) { + status = + acpi_os_write_port(acpi_gbl_FADT.smi_command, acpi_gbl_FADT.cst_control, 8); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "Notifying BIOS of _CST ability failed")); + } + } + + acpi_processor_get_power_info(pr); + pr->flags.power_setup_done = 1; + + /* + * Install the idle handler if processor power management is supported. + * Note that we use previously set idle handler will be used on + * platforms that only support C1. + */ + if (pr->flags.power) { + /* Register acpi_idle_driver if not already registered */ + if (!acpi_processor_registered) { + acpi_processor_setup_cpuidle_states(pr); + retval = cpuidle_register_driver(&acpi_idle_driver); + if (retval) + return retval; + printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n", + acpi_idle_driver.name); + } + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + per_cpu(acpi_cpuidle_device, pr->id) = dev; + + acpi_processor_setup_cpuidle_cx(pr, dev); + + /* Register per-cpu cpuidle_device. Cpuidle driver + * must already be registered before registering device + */ + retval = cpuidle_register_device(dev); + if (retval) { + if (acpi_processor_registered == 0) + cpuidle_unregister_driver(&acpi_idle_driver); + return retval; + } + acpi_processor_registered++; + } + return 0; +} + +int acpi_processor_power_exit(struct acpi_processor *pr) +{ + struct cpuidle_device *dev = per_cpu(acpi_cpuidle_device, pr->id); + + if (disabled_by_idle_boot_param()) + return 0; + + if (pr->flags.power) { + cpuidle_unregister_device(dev); + acpi_processor_registered--; + if (acpi_processor_registered == 0) + cpuidle_unregister_driver(&acpi_idle_driver); + } + + pr->flags.power_setup_done = 0; + return 0; +} -- cgit v1.2.3