From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: AndrĂ© Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/ata/Kconfig | 1000 ++++++ drivers/ata/Makefile | 118 + drivers/ata/acard-ahci.c | 513 +++ drivers/ata/ahci.c | 1564 +++++++++ drivers/ata/ahci.h | 426 +++ drivers/ata/ahci_da850.c | 120 + drivers/ata/ahci_imx.c | 694 ++++ drivers/ata/ahci_mvebu.c | 133 + drivers/ata/ahci_platform.c | 95 + drivers/ata/ahci_st.c | 252 ++ drivers/ata/ahci_sunxi.c | 270 ++ drivers/ata/ahci_tegra.c | 389 +++ drivers/ata/ahci_xgene.c | 751 +++++ drivers/ata/ata_generic.c | 258 ++ drivers/ata/ata_piix.c | 1805 ++++++++++ drivers/ata/libahci.c | 2551 ++++++++++++++ drivers/ata/libahci_platform.c | 741 +++++ drivers/ata/libata-acpi.c | 1054 ++++++ drivers/ata/libata-core.c | 7023 +++++++++++++++++++++++++++++++++++++++ drivers/ata/libata-eh.c | 4265 ++++++++++++++++++++++++ drivers/ata/libata-pmp.c | 1106 ++++++ drivers/ata/libata-scsi.c | 4299 ++++++++++++++++++++++++ drivers/ata/libata-sff.c | 3347 +++++++++++++++++++ drivers/ata/libata-trace.c | 151 + drivers/ata/libata-transport.c | 810 +++++ drivers/ata/libata-transport.h | 18 + drivers/ata/libata-zpodd.c | 283 ++ drivers/ata/libata.h | 262 ++ drivers/ata/pata_acpi.c | 280 ++ drivers/ata/pata_ali.c | 651 ++++ drivers/ata/pata_amd.c | 640 ++++ drivers/ata/pata_arasan_cf.c | 974 ++++++ drivers/ata/pata_artop.c | 459 +++ drivers/ata/pata_at32.c | 400 +++ drivers/ata/pata_at91.c | 456 +++ drivers/ata/pata_atiixp.c | 313 ++ drivers/ata/pata_atp867x.c | 573 ++++ drivers/ata/pata_bf54x.c | 1704 ++++++++++ drivers/ata/pata_cmd640.c | 271 ++ drivers/ata/pata_cmd64x.c | 533 +++ drivers/ata/pata_cs5520.c | 310 ++ drivers/ata/pata_cs5530.c | 369 ++ drivers/ata/pata_cs5535.c | 215 ++ drivers/ata/pata_cs5536.c | 312 ++ drivers/ata/pata_cypress.c | 166 + drivers/ata/pata_efar.c | 303 ++ drivers/ata/pata_ep93xx.c | 1036 ++++++ drivers/ata/pata_hpt366.c | 426 +++ drivers/ata/pata_hpt37x.c | 1066 ++++++ drivers/ata/pata_hpt3x2n.c | 629 ++++ drivers/ata/pata_hpt3x3.c | 292 ++ drivers/ata/pata_icside.c | 627 ++++ drivers/ata/pata_imx.c | 252 ++ drivers/ata/pata_isapnp.c | 135 + drivers/ata/pata_it8213.c | 298 ++ drivers/ata/pata_it821x.c | 983 ++++++ drivers/ata/pata_ixp4xx_cf.c | 207 ++ drivers/ata/pata_jmicron.c | 185 ++ drivers/ata/pata_legacy.c | 1276 +++++++ drivers/ata/pata_macio.c | 1421 ++++++++ drivers/ata/pata_marvell.c | 186 ++ drivers/ata/pata_mpc52xx.c | 876 +++++ drivers/ata/pata_mpiix.c | 238 ++ drivers/ata/pata_netcell.c | 107 + drivers/ata/pata_ninja32.c | 197 ++ drivers/ata/pata_ns87410.c | 176 + drivers/ata/pata_ns87415.c | 422 +++ drivers/ata/pata_octeon_cf.c | 1079 ++++++ drivers/ata/pata_of_platform.c | 94 + drivers/ata/pata_oldpiix.c | 273 ++ drivers/ata/pata_opti.c | 199 ++ drivers/ata/pata_optidma.c | 455 +++ drivers/ata/pata_palmld.c | 137 + drivers/ata/pata_pcmcia.c | 394 +++ drivers/ata/pata_pdc2027x.c | 789 +++++ drivers/ata/pata_pdc202xx_old.c | 392 +++ drivers/ata/pata_piccolo.c | 125 + drivers/ata/pata_platform.c | 240 ++ drivers/ata/pata_pxa.c | 397 +++ drivers/ata/pata_radisys.c | 252 ++ drivers/ata/pata_rb532_cf.c | 208 ++ drivers/ata/pata_rdc.c | 398 +++ drivers/ata/pata_rz1000.c | 148 + drivers/ata/pata_samsung_cf.c | 670 ++++ drivers/ata/pata_sc1200.c | 269 ++ drivers/ata/pata_sch.c | 180 + drivers/ata/pata_serverworks.c | 492 +++ drivers/ata/pata_sil680.c | 444 +++ drivers/ata/pata_sis.c | 914 +++++ drivers/ata/pata_sl82c105.c | 380 +++ drivers/ata/pata_triflex.c | 248 ++ drivers/ata/pata_via.c | 719 ++++ drivers/ata/pdc_adma.c | 668 ++++ drivers/ata/sata_dwc_460ex.c | 1325 ++++++++ drivers/ata/sata_fsl.c | 1644 +++++++++ drivers/ata/sata_highbank.c | 652 ++++ drivers/ata/sata_inic162x.c | 915 +++++ drivers/ata/sata_mv.c | 4524 +++++++++++++++++++++++++ drivers/ata/sata_nv.c | 2519 ++++++++++++++ drivers/ata/sata_promise.c | 1268 +++++++ drivers/ata/sata_promise.h | 157 + drivers/ata/sata_qstor.c | 643 ++++ drivers/ata/sata_rcar.c | 1039 ++++++ drivers/ata/sata_sil.c | 822 +++++ drivers/ata/sata_sil24.c | 1391 ++++++++ drivers/ata/sata_sis.c | 314 ++ drivers/ata/sata_svw.c | 544 +++ drivers/ata/sata_sx4.c | 1501 +++++++++ drivers/ata/sata_uli.c | 245 ++ drivers/ata/sata_via.c | 657 ++++ drivers/ata/sata_vsc.c | 443 +++ drivers/ata/sis.h | 5 + 112 files changed, 85434 insertions(+) create mode 100644 drivers/ata/Kconfig create mode 100644 drivers/ata/Makefile create mode 100644 drivers/ata/acard-ahci.c create mode 100644 drivers/ata/ahci.c create mode 100644 drivers/ata/ahci.h create mode 100644 drivers/ata/ahci_da850.c create mode 100644 drivers/ata/ahci_imx.c create mode 100644 drivers/ata/ahci_mvebu.c create mode 100644 drivers/ata/ahci_platform.c create mode 100644 drivers/ata/ahci_st.c create mode 100644 drivers/ata/ahci_sunxi.c create mode 100644 drivers/ata/ahci_tegra.c create mode 100644 drivers/ata/ahci_xgene.c create mode 100644 drivers/ata/ata_generic.c create mode 100644 drivers/ata/ata_piix.c create mode 100644 drivers/ata/libahci.c create mode 100644 drivers/ata/libahci_platform.c create mode 100644 drivers/ata/libata-acpi.c create mode 100644 drivers/ata/libata-core.c create mode 100644 drivers/ata/libata-eh.c create mode 100644 drivers/ata/libata-pmp.c create mode 100644 drivers/ata/libata-scsi.c create mode 100644 drivers/ata/libata-sff.c create mode 100644 drivers/ata/libata-trace.c create mode 100644 drivers/ata/libata-transport.c create mode 100644 drivers/ata/libata-transport.h create mode 100644 drivers/ata/libata-zpodd.c create mode 100644 drivers/ata/libata.h create mode 100644 drivers/ata/pata_acpi.c create mode 100644 drivers/ata/pata_ali.c create mode 100644 drivers/ata/pata_amd.c create mode 100644 drivers/ata/pata_arasan_cf.c create mode 100644 drivers/ata/pata_artop.c create mode 100644 drivers/ata/pata_at32.c create mode 100644 drivers/ata/pata_at91.c create mode 100644 drivers/ata/pata_atiixp.c create mode 100644 drivers/ata/pata_atp867x.c create mode 100644 drivers/ata/pata_bf54x.c create mode 100644 drivers/ata/pata_cmd640.c create mode 100644 drivers/ata/pata_cmd64x.c create mode 100644 drivers/ata/pata_cs5520.c create mode 100644 drivers/ata/pata_cs5530.c create mode 100644 drivers/ata/pata_cs5535.c create mode 100644 drivers/ata/pata_cs5536.c create mode 100644 drivers/ata/pata_cypress.c create mode 100644 drivers/ata/pata_efar.c create mode 100644 drivers/ata/pata_ep93xx.c create mode 100644 drivers/ata/pata_hpt366.c create mode 100644 drivers/ata/pata_hpt37x.c create mode 100644 drivers/ata/pata_hpt3x2n.c create mode 100644 drivers/ata/pata_hpt3x3.c create mode 100644 drivers/ata/pata_icside.c create mode 100644 drivers/ata/pata_imx.c create mode 100644 drivers/ata/pata_isapnp.c create mode 100644 drivers/ata/pata_it8213.c create mode 100644 drivers/ata/pata_it821x.c create mode 100644 drivers/ata/pata_ixp4xx_cf.c create mode 100644 drivers/ata/pata_jmicron.c create mode 100644 drivers/ata/pata_legacy.c create mode 100644 drivers/ata/pata_macio.c create mode 100644 drivers/ata/pata_marvell.c create mode 100644 drivers/ata/pata_mpc52xx.c create mode 100644 drivers/ata/pata_mpiix.c create mode 100644 drivers/ata/pata_netcell.c create mode 100644 drivers/ata/pata_ninja32.c create mode 100644 drivers/ata/pata_ns87410.c create mode 100644 drivers/ata/pata_ns87415.c create mode 100644 drivers/ata/pata_octeon_cf.c create mode 100644 drivers/ata/pata_of_platform.c create mode 100644 drivers/ata/pata_oldpiix.c create mode 100644 drivers/ata/pata_opti.c create mode 100644 drivers/ata/pata_optidma.c create mode 100644 drivers/ata/pata_palmld.c create mode 100644 drivers/ata/pata_pcmcia.c create mode 100644 drivers/ata/pata_pdc2027x.c create mode 100644 drivers/ata/pata_pdc202xx_old.c create mode 100644 drivers/ata/pata_piccolo.c create mode 100644 drivers/ata/pata_platform.c create mode 100644 drivers/ata/pata_pxa.c create mode 100644 drivers/ata/pata_radisys.c create mode 100644 drivers/ata/pata_rb532_cf.c create mode 100644 drivers/ata/pata_rdc.c create mode 100644 drivers/ata/pata_rz1000.c create mode 100644 drivers/ata/pata_samsung_cf.c create mode 100644 drivers/ata/pata_sc1200.c create mode 100644 drivers/ata/pata_sch.c create mode 100644 drivers/ata/pata_serverworks.c create mode 100644 drivers/ata/pata_sil680.c create mode 100644 drivers/ata/pata_sis.c create mode 100644 drivers/ata/pata_sl82c105.c create mode 100644 drivers/ata/pata_triflex.c create mode 100644 drivers/ata/pata_via.c create mode 100644 drivers/ata/pdc_adma.c create mode 100644 drivers/ata/sata_dwc_460ex.c create mode 100644 drivers/ata/sata_fsl.c create mode 100644 drivers/ata/sata_highbank.c create mode 100644 drivers/ata/sata_inic162x.c create mode 100644 drivers/ata/sata_mv.c create mode 100644 drivers/ata/sata_nv.c create mode 100644 drivers/ata/sata_promise.c create mode 100644 drivers/ata/sata_promise.h create mode 100644 drivers/ata/sata_qstor.c create mode 100644 drivers/ata/sata_rcar.c create mode 100644 drivers/ata/sata_sil.c create mode 100644 drivers/ata/sata_sil24.c create mode 100644 drivers/ata/sata_sis.c create mode 100644 drivers/ata/sata_svw.c create mode 100644 drivers/ata/sata_sx4.c create mode 100644 drivers/ata/sata_uli.c create mode 100644 drivers/ata/sata_via.c create mode 100644 drivers/ata/sata_vsc.c create mode 100644 drivers/ata/sis.h (limited to 'drivers/ata') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig new file mode 100644 index 000000000..9dca4b995 --- /dev/null +++ b/drivers/ata/Kconfig @@ -0,0 +1,1000 @@ +# +# SATA/PATA driver configuration +# + +config HAVE_PATA_PLATFORM + bool + help + This is an internal configuration node for any machine that + uses pata-platform driver to enable the relevant driver in the + configuration structure without having to submit endless patches + to update the PATA_PLATFORM entry. + +menuconfig ATA + tristate "Serial ATA and Parallel ATA drivers (libata)" + depends on HAS_IOMEM + depends on BLOCK + depends on !(M32R || M68K || S390) || BROKEN + select SCSI + select GLOB + ---help--- + If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or + any other ATA device under Linux, say Y and make sure that you know + the name of your ATA host adapter (the card inside your computer + that "speaks" the ATA protocol, also called ATA controller), + because you will be asked for it. + + NOTE: ATA enables basic SCSI support; *however*, + 'SCSI disk support', 'SCSI tape support', or + 'SCSI CDROM support' may also be needed, + depending on your hardware configuration. + +if ATA + +config ATA_NONSTANDARD + bool + default n + +config ATA_VERBOSE_ERROR + bool "Verbose ATA error reporting" + default y + help + This option adds parsing of ATA command descriptions and error bits + in libata kernel output, making it easier to interpret. + This option will enlarge the kernel by approx. 6KB. Disable it only + if kernel size is more important than ease of debugging. + + If unsure, say Y. + +config ATA_ACPI + bool "ATA ACPI Support" + depends on ACPI && PCI + default y + help + This option adds support for ATA-related ACPI objects. + These ACPI objects add the ability to retrieve taskfiles + from the ACPI BIOS and write them to the disk controller. + These objects may be related to performance, security, + power management, or other areas. + You can disable this at kernel boot time by using the + option libata.noacpi=1 + +config SATA_ZPODD + bool "SATA Zero Power Optical Disc Drive (ZPODD) support" + depends on ATA_ACPI && PM + default n + help + This option adds support for SATA Zero Power Optical Disc + Drive (ZPODD). It requires both the ODD and the platform + support, and if enabled, will automatically power on/off the + ODD when certain condition is satisfied. This does not impact + end user's experience of the ODD, only power is saved when + the ODD is not in use (i.e. no disc inside). + + If unsure, say N. + +config SATA_PMP + bool "SATA Port Multiplier support" + default y + help + This option adds support for SATA Port Multipliers + (the SATA version of an ethernet hub, or SAS expander). + +comment "Controllers with non-SFF native interface" + +config SATA_AHCI + tristate "AHCI SATA support" + depends on PCI + help + This option enables support for AHCI Serial ATA. + + If unsure, say N. + +config SATA_AHCI_PLATFORM + tristate "Platform AHCI SATA support" + help + This option enables support for Platform AHCI Serial ATA + controllers. + + If unsure, say N. + +config AHCI_DA850 + tristate "DaVinci DA850 AHCI SATA support" + depends on ARCH_DAVINCI_DA850 + help + This option enables support for the DaVinci DA850 SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_ST + tristate "ST AHCI SATA support" + depends on ARCH_STI + help + This option enables support for ST AHCI SATA controller. + + If unsure, say N. + +config AHCI_IMX + tristate "Freescale i.MX AHCI SATA support" + depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST) + help + This option enables support for the Freescale i.MX SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_MVEBU + tristate "Marvell EBU AHCI SATA support" + depends on ARCH_MVEBU + help + This option enables support for the Marvebu EBU SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_SUNXI + tristate "Allwinner sunxi AHCI SATA support" + depends on ARCH_SUNXI + help + This option enables support for the Allwinner sunxi SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_TEGRA + tristate "NVIDIA Tegra124 AHCI SATA support" + depends on ARCH_TEGRA + help + This option enables support for the NVIDIA Tegra124 SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_XGENE + tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support" + depends on PHY_XGENE + help + This option enables support for APM X-Gene SoC SATA host controller. + +config SATA_FSL + tristate "Freescale 3.0Gbps SATA support" + depends on FSL_SOC + help + This option enables support for Freescale 3.0Gbps SATA controller. + It can be found on MPC837x and MPC8315. + + If unsure, say N. + +config SATA_INIC162X + tristate "Initio 162x SATA support (Very Experimental)" + depends on PCI + help + This option enables support for Initio 162x Serial ATA. + +config SATA_ACARD_AHCI + tristate "ACard AHCI variant (ATP 8620)" + depends on PCI + help + This option enables support for Acard. + + If unsure, say N. + +config SATA_SIL24 + tristate "Silicon Image 3124/3132 SATA support" + depends on PCI + help + This option enables support for Silicon Image 3124/3132 Serial ATA. + + If unsure, say N. + +config ATA_SFF + bool "ATA SFF support (for legacy IDE and PATA)" + default y + help + This option adds support for ATA controllers with SFF + compliant or similar programming interface. + + SFF is the legacy IDE interface that has been around since + the dawn of time. Almost all PATA controllers have an + SFF interface. Many SATA controllers have an SFF interface + when configured into a legacy compatibility mode. + + For users with exclusively modern controllers like AHCI, + Silicon Image 3124, or Marvell 6440, you may choose to + disable this unneeded SFF support. + + If unsure, say Y. + +if ATA_SFF + +comment "SFF controllers with custom DMA interface" + +config PDC_ADMA + tristate "Pacific Digital ADMA support" + depends on PCI + help + This option enables support for Pacific Digital ADMA controllers + + If unsure, say N. + +config PATA_OCTEON_CF + tristate "OCTEON Boot Bus Compact Flash support" + depends on CAVIUM_OCTEON_SOC + help + This option enables a polled compact flash driver for use with + compact flash cards attached to the OCTEON boot bus. + + If unsure, say N. + +config SATA_QSTOR + tristate "Pacific Digital SATA QStor support" + depends on PCI + help + This option enables support for Pacific Digital Serial ATA QStor. + + If unsure, say N. + +config SATA_SX4 + tristate "Promise SATA SX4 support (Experimental)" + depends on PCI + help + This option enables support for Promise Serial ATA SX4. + + If unsure, say N. + +config ATA_BMDMA + bool "ATA BMDMA support" + default y + help + This option adds support for SFF ATA controllers with BMDMA + capability. BMDMA stands for bus-master DMA and is the + de facto DMA interface for SFF controllers. + + If unsure, say Y. + +if ATA_BMDMA + +comment "SATA SFF controllers with BMDMA" + +config ATA_PIIX + tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" + depends on PCI + help + This option enables support for ICH5/6/7/8 Serial ATA + and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series + host controllers. + + If unsure, say N. + +config SATA_DWC + tristate "DesignWare Cores SATA support" + depends on 460EX + select DW_DMAC + help + This option enables support for the on-chip SATA controller of the + AppliedMicro processor 460EX. + + If unsure, say N. + +config SATA_DWC_DEBUG + bool "Debugging driver version" + depends on SATA_DWC + help + This option enables debugging output in the driver. + +config SATA_DWC_VDEBUG + bool "Verbose debug output" + depends on SATA_DWC_DEBUG + help + This option enables the taskfile dumping and NCQ debugging. + +config SATA_HIGHBANK + tristate "Calxeda Highbank SATA support" + depends on ARCH_HIGHBANK || COMPILE_TEST + help + This option enables support for the Calxeda Highbank SoC's + onboard SATA. + + If unsure, say N. + +config SATA_MV + tristate "Marvell SATA support" + depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ + ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST + select GENERIC_PHY + help + This option enables support for the Marvell Serial ATA family. + Currently supports 88SX[56]0[48][01] PCI(-X) chips, + as well as the newer [67]042 PCI-X/PCIe and SOC devices. + + If unsure, say N. + +config SATA_NV + tristate "NVIDIA SATA support" + depends on PCI + help + This option enables support for NVIDIA Serial ATA. + + If unsure, say N. + +config SATA_PROMISE + tristate "Promise SATA TX2/TX4 support" + depends on PCI + help + This option enables support for Promise Serial ATA TX2/TX4. + + If unsure, say N. + +config SATA_RCAR + tristate "Renesas R-Car SATA support" + depends on ARCH_SHMOBILE || COMPILE_TEST + help + This option enables support for Renesas R-Car Serial ATA. + + If unsure, say N. + +config SATA_SIL + tristate "Silicon Image SATA support" + depends on PCI + help + This option enables support for Silicon Image Serial ATA. + + If unsure, say N. + +config SATA_SIS + tristate "SiS 964/965/966/180 SATA support" + depends on PCI + select PATA_SIS + help + This option enables support for SiS Serial ATA on + SiS 964/965/966/180 and Parallel ATA on SiS 180. + The PATA support for SiS 180 requires additionally to + enable the PATA_SIS driver in the config. + If unsure, say N. + +config SATA_SVW + tristate "ServerWorks Frodo / Apple K2 SATA support" + depends on PCI + help + This option enables support for Broadcom/Serverworks/Apple K2 + SATA support. + + If unsure, say N. + +config SATA_ULI + tristate "ULi Electronics SATA support" + depends on PCI + help + This option enables support for ULi Electronics SATA. + + If unsure, say N. + +config SATA_VIA + tristate "VIA SATA support" + depends on PCI + help + This option enables support for VIA Serial ATA. + + If unsure, say N. + +config SATA_VITESSE + tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" + depends on PCI + help + This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. + + If unsure, say N. + +comment "PATA SFF controllers with BMDMA" + +config PATA_ALI + tristate "ALi PATA support" + depends on PCI + help + This option enables support for the ALi ATA interfaces + found on the many ALi chipsets. + + If unsure, say N. + +config PATA_AMD + tristate "AMD/NVidia PATA support" + depends on PCI + help + This option enables support for the AMD and NVidia PATA + interfaces found on the chipsets for Athlon/Athlon64. + + If unsure, say N. + +config PATA_ARASAN_CF + tristate "ARASAN CompactFlash PATA Controller Support" + depends on ARCH_SPEAR13XX || COMPILE_TEST + depends on DMADEVICES + select DMA_ENGINE + help + Say Y here to support the ARASAN CompactFlash PATA controller + +config PATA_ARTOP + tristate "ARTOP 6210/6260 PATA support" + depends on PCI + help + This option enables support for ARTOP PATA controllers. + + If unsure, say N. + +config PATA_ATIIXP + tristate "ATI PATA support" + depends on PCI + help + This option enables support for the ATI ATA interfaces + found on the many ATI chipsets. + + If unsure, say N. + +config PATA_ATP867X + tristate "ARTOP/Acard ATP867X PATA support" + depends on PCI + help + This option enables support for ARTOP/Acard ATP867X PATA + controllers. + + If unsure, say N. + +config PATA_BF54X + tristate "Blackfin 54x ATAPI support" + depends on BF542 || BF548 || BF549 + help + This option enables support for the built-in ATAPI controller on + Blackfin 54x family chips. + + If unsure, say N. + +config PATA_CMD64X + tristate "CMD64x PATA support" + depends on PCI + help + This option enables support for the CMD64x series chips + except for the CMD640. + + If unsure, say N. + +config PATA_CS5520 + tristate "CS5510/5520 PATA support" + depends on PCI && (X86_32 || COMPILE_TEST) + help + This option enables support for the Cyrix 5510/5520 + companion chip used with the MediaGX/Geode processor family. + + If unsure, say N. + +config PATA_CS5530 + tristate "CS5530 PATA support" + depends on PCI && (X86_32 || COMPILE_TEST) + help + This option enables support for the Cyrix/NatSemi/AMD CS5530 + companion chip used with the MediaGX/Geode processor family. + + If unsure, say N. + +config PATA_CS5535 + tristate "CS5535 PATA support (Experimental)" + depends on PCI && X86_32 + help + This option enables support for the NatSemi/AMD CS5535 + companion chip used with the Geode processor family. + + If unsure, say N. + +config PATA_CS5536 + tristate "CS5536 PATA support" + depends on PCI && (X86_32 || MIPS || COMPILE_TEST) + help + This option enables support for the AMD CS5536 + companion chip used with the Geode LX processor family. + + If unsure, say N. + +config PATA_CYPRESS + tristate "Cypress CY82C693 PATA support (Very Experimental)" + depends on PCI + help + This option enables support for the Cypress/Contaq CY82C693 + chipset found in some Alpha systems + + If unsure, say N. + +config PATA_EFAR + tristate "EFAR SLC90E66 support" + depends on PCI + help + This option enables support for the EFAR SLC90E66 + IDE controller found on some older machines. + + If unsure, say N. + +config PATA_EP93XX + tristate "Cirrus Logic EP93xx PATA support" + depends on ARCH_EP93XX + help + This option enables support for the PATA controller in + the Cirrus Logic EP9312 and EP9315 ARM CPU. + + If unsure, say N. + +config PATA_HPT366 + tristate "HPT 366/368 PATA support" + depends on PCI + help + This option enables support for the HPT 366 and 368 + PATA controllers via the new ATA layer. + + If unsure, say N. + +config PATA_HPT37X + tristate "HPT 370/370A/371/372/374/302 PATA support" + depends on PCI + help + This option enables support for the majority of the later HPT + PATA controllers via the new ATA layer. + + If unsure, say N. + +config PATA_HPT3X2N + tristate "HPT 371N/372N/302N PATA support" + depends on PCI + help + This option enables support for the N variant HPT PATA + controllers via the new ATA layer. + + If unsure, say N. + +config PATA_HPT3X3 + tristate "HPT 343/363 PATA support" + depends on PCI + help + This option enables support for the HPT 343/363 + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_HPT3X3_DMA + bool "HPT 343/363 DMA support" + depends on PATA_HPT3X3 + help + This option enables DMA support for the HPT343/363 + controllers. Enable with care as there are still some + problems with DMA on this chipset. + +config PATA_ICSIDE + tristate "Acorn ICS PATA support" + depends on ARM && ARCH_ACORN + help + On Acorn systems, say Y here if you wish to use the ICS PATA + interface card. This is not required for ICS partition support. + If you are unsure, say N to this. + +config PATA_IMX + tristate "PATA support for Freescale iMX" + depends on ARCH_MXC + help + This option enables support for the PATA host available on Freescale + iMX SoCs. + + If unsure, say N. + +config PATA_IT8213 + tristate "IT8213 PATA support (Experimental)" + depends on PCI + help + This option enables support for the ITE 821 PATA + controllers via the new ATA layer. + + If unsure, say N. + +config PATA_IT821X + tristate "IT8211/2 PATA support" + depends on PCI + help + This option enables support for the ITE 8211 and 8212 + PATA controllers via the new ATA layer, including RAID + mode. + + If unsure, say N. + +config PATA_JMICRON + tristate "JMicron PATA support" + depends on PCI + help + Enable support for the JMicron IDE controller, via the new + ATA layer. + + If unsure, say N. + +config PATA_MACIO + tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" + depends on PPC_PMAC + help + Most IDE capable PowerMacs have IDE busses driven by a variant + of this controller which is part of the Apple chipset used on + most PowerMac models. Some models have multiple busses using + different chipsets, though generally, MacIO is one of them. + +config PATA_MARVELL + tristate "Marvell PATA support via legacy mode" + depends on PCI + help + This option enables limited support for the Marvell 88SE61xx ATA + controllers. If you wish to use only the SATA ports then select + the AHCI driver alone. If you wish to the use the PATA port or + both SATA and PATA include this driver. + + If unsure, say N. + +config PATA_MPC52xx + tristate "Freescale MPC52xx SoC internal IDE" + depends on PPC_MPC52xx && PPC_BESTCOMM + select PPC_BESTCOMM_ATA + help + This option enables support for integrated IDE controller + of the Freescale MPC52xx SoC. + + If unsure, say N. + +config PATA_NETCELL + tristate "NETCELL Revolution RAID support" + depends on PCI + help + This option enables support for the Netcell Revolution RAID + PATA controller. + + If unsure, say N. + +config PATA_NINJA32 + tristate "Ninja32/Delkin Cardbus ATA support" + depends on PCI + help + This option enables support for the Ninja32, Delkin and + possibly other brands of Cardbus ATA adapter + + If unsure, say N. + +config PATA_NS87415 + tristate "Nat Semi NS87415 PATA support" + depends on PCI + help + This option enables support for the National Semiconductor + NS87415 PCI-IDE controller. + + If unsure, say N. + +config PATA_OLDPIIX + tristate "Intel PATA old PIIX support" + depends on PCI + help + This option enables support for early PIIX PATA support. + + If unsure, say N. + +config PATA_OPTIDMA + tristate "OPTI FireStar PATA support (Very Experimental)" + depends on PCI + help + This option enables DMA/PIO support for the later OPTi + controllers found on some old motherboards and in some + laptops. + + If unsure, say N. + +config PATA_PDC2027X + tristate "Promise PATA 2027x support" + depends on PCI + help + This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. + + If unsure, say N. + +config PATA_PDC_OLD + tristate "Older Promise PATA controller support" + depends on PCI + help + This option enables support for the Promise 20246, 20262, 20263, + 20265 and 20267 adapters. + + If unsure, say N. + +config PATA_RADISYS + tristate "RADISYS 82600 PATA support (Experimental)" + depends on PCI + help + This option enables support for the RADISYS 82600 + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_RDC + tristate "RDC PATA support" + depends on PCI + help + This option enables basic support for the later RDC PATA controllers + controllers via the new ATA layer. For the RDC 1010, you need to + enable the IT821X driver instead. + + If unsure, say N. + +config PATA_SC1200 + tristate "SC1200 PATA support" + depends on PCI && (X86_32 || COMPILE_TEST) + help + This option enables support for the NatSemi/AMD SC1200 SoC + companion chip used with the Geode processor family. + + If unsure, say N. + +config PATA_SCH + tristate "Intel SCH PATA support" + depends on PCI + help + This option enables support for Intel SCH PATA on the Intel + SCH (US15W, US15L, UL11L) series host controllers. + + If unsure, say N. + +config PATA_SERVERWORKS + tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" + depends on PCI + help + This option enables support for the Serverworks OSB4/CSB5/CSB6 and + HT1000 PATA controllers, via the new ATA layer. + + If unsure, say N. + +config PATA_SIL680 + tristate "CMD / Silicon Image 680 PATA support" + depends on PCI + help + This option enables support for CMD / Silicon Image 680 PATA. + + If unsure, say N. + +config PATA_SIS + tristate "SiS PATA support" + depends on PCI + help + This option enables support for SiS PATA controllers + + If unsure, say N. + +config PATA_TOSHIBA + tristate "Toshiba Piccolo support (Experimental)" + depends on PCI + help + Support for the Toshiba Piccolo controllers. Currently only the + primary channel is supported by this driver. + + If unsure, say N. + +config PATA_TRIFLEX + tristate "Compaq Triflex PATA support" + depends on PCI + help + Enable support for the Compaq 'Triflex' IDE controller as found + on many Compaq Pentium-Pro systems, via the new ATA layer. + + If unsure, say N. + +config PATA_VIA + tristate "VIA PATA support" + depends on PCI + help + This option enables support for the VIA PATA interfaces + found on the many VIA chipsets. + + If unsure, say N. + +config PATA_PXA + tristate "PXA DMA-capable PATA support" + depends on ARCH_PXA + help + This option enables support for harddrive attached to PXA CPU's bus. + + NOTE: This driver utilizes PXA DMA controller, in case your hardware + is not capable of doing MWDMA, use pata_platform instead. + + If unsure, say N. + +config PATA_WINBOND + tristate "Winbond SL82C105 PATA support" + depends on PCI + help + This option enables support for SL82C105 PATA devices found in the + Netwinder and some other systems + + If unsure, say N. + +endif # ATA_BMDMA + +comment "PIO-only SFF controllers" + +config PATA_AT32 + tristate "Atmel AVR32 PATA support (Experimental)" + depends on AVR32 && PLATFORM_AT32AP + help + This option enables support for the IDE devices on the + Atmel AT32AP platform. + + If unsure, say N. + +config PATA_AT91 + tristate "PATA support for AT91SAM9260" + depends on ARM && SOC_AT91SAM9 + depends on !ARCH_MULTIPLATFORM + help + This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. + + If unsure, say N. + +config PATA_CMD640_PCI + tristate "CMD640 PCI PATA support (Experimental)" + depends on PCI + help + This option enables support for the CMD640 PCI IDE + interface chip. Only the primary channel is currently + supported. + + If unsure, say N. + +config PATA_ISAPNP + tristate "ISA Plug and Play PATA support" + depends on ISAPNP + help + This option enables support for ISA plug & play ATA + controllers such as those found on old soundcards. + + If unsure, say N. + +config PATA_IXP4XX_CF + tristate "IXP4XX Compact Flash support" + depends on ARCH_IXP4XX + help + This option enables support for a Compact Flash connected on + the ixp4xx expansion bus. This driver had been written for + Loft/Avila boards in mind but can work with others. + + If unsure, say N. + +config PATA_MPIIX + tristate "Intel PATA MPIIX support" + depends on PCI + help + This option enables support for MPIIX PATA support. + + If unsure, say N. + +config PATA_NS87410 + tristate "Nat Semi NS87410 PATA support" + depends on PCI + help + This option enables support for the National Semiconductor + NS87410 PCI-IDE controller. + + If unsure, say N. + +config PATA_OPTI + tristate "OPTI621/6215 PATA support (Very Experimental)" + depends on PCI + help + This option enables full PIO support for the early Opti ATA + controllers found on some old motherboards. + + If unsure, say N. + +config PATA_PALMLD + tristate "Palm LifeDrive PATA support" + depends on MACH_PALMLD + help + This option enables support for Palm LifeDrive's internal ATA + port via the new ATA layer. + + If unsure, say N. + +config PATA_PCMCIA + tristate "PCMCIA PATA support" + depends on PCMCIA + help + This option enables support for PCMCIA ATA interfaces, including + compact flash card adapters via the new ATA layer. + + If unsure, say N. + +config PATA_PLATFORM + tristate "Generic platform device PATA support" + depends on EXPERT || PPC || HAVE_PATA_PLATFORM + help + This option enables support for generic directly connected ATA + devices commonly found on embedded systems. + + If unsure, say N. + +config PATA_OF_PLATFORM + tristate "OpenFirmware platform device PATA support" + depends on PATA_PLATFORM && OF + help + This option enables support for generic directly connected ATA + devices commonly found on embedded systems with OpenFirmware + bindings. + + If unsure, say N. + +config PATA_QDI + tristate "QDI VLB PATA support" + depends on ISA + select PATA_LEGACY + help + Support for QDI 6500 and 6580 PATA controllers on VESA local bus. + +config PATA_RB532 + tristate "RouterBoard 532 PATA CompactFlash support" + depends on MIKROTIK_RB532 + help + This option enables support for the RouterBoard 532 + PATA CompactFlash controller. + + If unsure, say N. + +config PATA_RZ1000 + tristate "PC Tech RZ1000 PATA support" + depends on PCI + help + This option enables basic support for the PC Tech RZ1000/1 + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_SAMSUNG_CF + tristate "Samsung SoC PATA support" + depends on SAMSUNG_DEV_IDE + help + This option enables basic support for Samsung's S3C/S5P board + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_WINBOND_VLB + tristate "Winbond W83759A VLB PATA support (Experimental)" + depends on ISA + select PATA_LEGACY + help + Support for the Winbond W83759A controller on Vesa Local Bus + systems. + +comment "Generic fallback / legacy drivers" + +config PATA_ACPI + tristate "ACPI firmware driver for PATA" + depends on ATA_ACPI && ATA_BMDMA + help + This option enables an ACPI method driver which drives + motherboard PATA controller interfaces through the ACPI + firmware in the BIOS. This driver can sometimes handle + otherwise unsupported hardware. + +config ATA_GENERIC + tristate "Generic ATA support" + depends on PCI && ATA_BMDMA + help + This option enables support for generic BIOS configured + ATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_LEGACY + tristate "Legacy ISA PATA support (Experimental)" + depends on (ISA || PCI) + help + This option enables support for ISA/VLB/PCI bus legacy PATA + ports and allows them to be accessed via the new ATA layer. + + If unsure, say N. + +endif # ATA_SFF +endif # ATA diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile new file mode 100644 index 000000000..40f7865f2 --- /dev/null +++ b/drivers/ata/Makefile @@ -0,0 +1,118 @@ + +obj-$(CONFIG_ATA) += libata.o + +# non-SFF interface +obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o +obj-$(CONFIG_SATA_ACARD_AHCI) += acard-ahci.o libahci.o +obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o +obj-$(CONFIG_SATA_FSL) += sata_fsl.o +obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o +obj-$(CONFIG_SATA_SIL24) += sata_sil24.o +obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o +obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o +obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_TEGRA) += ahci_tegra.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_XGENE) += ahci_xgene.o libahci.o libahci_platform.o + +# SFF w/ custom DMA +obj-$(CONFIG_PDC_ADMA) += pdc_adma.o +obj-$(CONFIG_PATA_ARASAN_CF) += pata_arasan_cf.o +obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o +obj-$(CONFIG_SATA_QSTOR) += sata_qstor.o +obj-$(CONFIG_SATA_SX4) += sata_sx4.o + +# SFF SATA w/ BMDMA +obj-$(CONFIG_ATA_PIIX) += ata_piix.o +obj-$(CONFIG_SATA_MV) += sata_mv.o +obj-$(CONFIG_SATA_NV) += sata_nv.o +obj-$(CONFIG_SATA_PROMISE) += sata_promise.o +obj-$(CONFIG_SATA_RCAR) += sata_rcar.o +obj-$(CONFIG_SATA_SIL) += sata_sil.o +obj-$(CONFIG_SATA_SIS) += sata_sis.o +obj-$(CONFIG_SATA_SVW) += sata_svw.o +obj-$(CONFIG_SATA_ULI) += sata_uli.o +obj-$(CONFIG_SATA_VIA) += sata_via.o +obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o + +# SFF PATA w/ BMDMA +obj-$(CONFIG_PATA_ALI) += pata_ali.o +obj-$(CONFIG_PATA_AMD) += pata_amd.o +obj-$(CONFIG_PATA_ARTOP) += pata_artop.o +obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o +obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o +obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o +obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o +obj-$(CONFIG_PATA_CS5520) += pata_cs5520.o +obj-$(CONFIG_PATA_CS5530) += pata_cs5530.o +obj-$(CONFIG_PATA_CS5535) += pata_cs5535.o +obj-$(CONFIG_PATA_CS5536) += pata_cs5536.o +obj-$(CONFIG_PATA_CYPRESS) += pata_cypress.o +obj-$(CONFIG_PATA_EFAR) += pata_efar.o +obj-$(CONFIG_PATA_EP93XX) += pata_ep93xx.o +obj-$(CONFIG_PATA_HPT366) += pata_hpt366.o +obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o +obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o +obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o +obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o +obj-$(CONFIG_PATA_IMX) += pata_imx.o +obj-$(CONFIG_PATA_IT8213) += pata_it8213.o +obj-$(CONFIG_PATA_IT821X) += pata_it821x.o +obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o +obj-$(CONFIG_PATA_MACIO) += pata_macio.o +obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o +obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o +obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o +obj-$(CONFIG_PATA_NINJA32) += pata_ninja32.o +obj-$(CONFIG_PATA_NS87415) += pata_ns87415.o +obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o +obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o +obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o +obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o +obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o +obj-$(CONFIG_PATA_RDC) += pata_rdc.o +obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o +obj-$(CONFIG_PATA_SCH) += pata_sch.o +obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o +obj-$(CONFIG_PATA_SIL680) += pata_sil680.o +obj-$(CONFIG_PATA_SIS) += pata_sis.o +obj-$(CONFIG_PATA_TOSHIBA) += pata_piccolo.o +obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o +obj-$(CONFIG_PATA_VIA) += pata_via.o +obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o + +# SFF PIO only +obj-$(CONFIG_PATA_AT32) += pata_at32.o +obj-$(CONFIG_PATA_AT91) += pata_at91.o +obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o +obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o +obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o +obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o +obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o +obj-$(CONFIG_PATA_OPTI) += pata_opti.o +obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o +obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o +obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o +obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o +obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o +obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o +obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o + +obj-$(CONFIG_PATA_PXA) += pata_pxa.o + +# Should be last but two libata driver +obj-$(CONFIG_PATA_ACPI) += pata_acpi.o +# Should be last but one libata driver +obj-$(CONFIG_ATA_GENERIC) += ata_generic.o +# Should be last libata driver +obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o + +libata-y := libata-core.o libata-scsi.o libata-eh.o \ + libata-transport.o libata-trace.o +libata-$(CONFIG_ATA_SFF) += libata-sff.o +libata-$(CONFIG_SATA_PMP) += libata-pmp.o +libata-$(CONFIG_ATA_ACPI) += libata-acpi.o +libata-$(CONFIG_SATA_ZPODD) += libata-zpodd.o diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c new file mode 100644 index 000000000..002922964 --- /dev/null +++ b/drivers/ata/acard-ahci.c @@ -0,0 +1,513 @@ + +/* + * acard-ahci.c - ACard AHCI SATA support + * + * Maintained by: Tejun Heo + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2010 Red Hat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * AHCI hardware documentation: + * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf + * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ahci.h" + +#define DRV_NAME "acard-ahci" +#define DRV_VERSION "1.0" + +/* + Received FIS structure limited to 80h. +*/ + +#define ACARD_AHCI_RX_FIS_SZ 128 + +enum { + AHCI_PCI_BAR = 5, +}; + +enum board_ids { + board_acard_ahci, +}; + +struct acard_sg { + __le32 addr; + __le32 addr_hi; + __le32 reserved; + __le32 size; /* bit 31 (EOT) max==0x10000 (64k) */ +}; + +static void acard_ahci_qc_prep(struct ata_queued_cmd *qc); +static bool acard_ahci_qc_fill_rtf(struct ata_queued_cmd *qc); +static int acard_ahci_port_start(struct ata_port *ap); +static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); + +#ifdef CONFIG_PM_SLEEP +static int acard_ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); +static int acard_ahci_pci_device_resume(struct pci_dev *pdev); +#endif + +static struct scsi_host_template acard_ahci_sht = { + AHCI_SHT("acard-ahci"), +}; + +static struct ata_port_operations acard_ops = { + .inherits = &ahci_ops, + .qc_prep = acard_ahci_qc_prep, + .qc_fill_rtf = acard_ahci_qc_fill_rtf, + .port_start = acard_ahci_port_start, +}; + +#define AHCI_HFLAGS(flags) .private_data = (void *)(flags) + +static const struct ata_port_info acard_ahci_port_info[] = { + [board_acard_ahci] = + { + AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &acard_ops, + }, +}; + +static const struct pci_device_id acard_ahci_pci_tbl[] = { + /* ACard */ + { PCI_VDEVICE(ARTOP, 0x000d), board_acard_ahci }, /* ATP8620 */ + + { } /* terminate list */ +}; + +static struct pci_driver acard_ahci_pci_driver = { + .name = DRV_NAME, + .id_table = acard_ahci_pci_tbl, + .probe = acard_ahci_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = acard_ahci_pci_device_suspend, + .resume = acard_ahci_pci_device_resume, +#endif +}; + +#ifdef CONFIG_PM_SLEEP +static int acard_ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host *host = pci_get_drvdata(pdev); + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->mmio; + u32 ctl; + + if (mesg.event & PM_EVENT_SUSPEND && + hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { + dev_err(&pdev->dev, + "BIOS update required for suspend/resume\n"); + return -EIO; + } + + if (mesg.event & PM_EVENT_SLEEP) { + /* AHCI spec rev1.1 section 8.3.3: + * Software must disable interrupts prior to requesting a + * transition of the HBA to D3 state. + */ + ctl = readl(mmio + HOST_CTL); + ctl &= ~HOST_IRQ_EN; + writel(ctl, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + } + + return ata_pci_device_suspend(pdev, mesg); +} + +static int acard_ahci_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { + rc = ahci_reset_controller(host); + if (rc) + return rc; + + ahci_init_controller(host); + } + + ata_host_resume(host); + + return 0; +} +#endif + +static int acard_ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac) +{ + int rc; + + if (using_dac && + !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) { + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + if (rc) { + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, + "64-bit DMA enable failed\n"); + return rc; + } + } + } else { + rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, "32-bit DMA enable failed\n"); + return rc; + } + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, + "32-bit consistent DMA enable failed\n"); + return rc; + } + } + return 0; +} + +static void acard_ahci_pci_print_info(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + u16 cc; + const char *scc_s; + + pci_read_config_word(pdev, 0x0a, &cc); + if (cc == PCI_CLASS_STORAGE_IDE) + scc_s = "IDE"; + else if (cc == PCI_CLASS_STORAGE_SATA) + scc_s = "SATA"; + else if (cc == PCI_CLASS_STORAGE_RAID) + scc_s = "RAID"; + else + scc_s = "unknown"; + + ahci_print_info(host, scc_s); +} + +static unsigned int acard_ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) +{ + struct scatterlist *sg; + struct acard_sg *acard_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; + unsigned int si, last_si = 0; + + VPRINTK("ENTER\n"); + + /* + * Next, the S/G list. + */ + for_each_sg(qc->sg, sg, qc->n_elem, si) { + dma_addr_t addr = sg_dma_address(sg); + u32 sg_len = sg_dma_len(sg); + + /* + * ACard note: + * We must set an end-of-table (EOT) bit, + * and the segment cannot exceed 64k (0x10000) + */ + acard_sg[si].addr = cpu_to_le32(addr & 0xffffffff); + acard_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16); + acard_sg[si].size = cpu_to_le32(sg_len); + last_si = si; + } + + acard_sg[last_si].size |= cpu_to_le32(1 << 31); /* set EOT */ + + return si; +} + +static void acard_ahci_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ahci_port_priv *pp = ap->private_data; + int is_atapi = ata_is_atapi(qc->tf.protocol); + void *cmd_tbl; + u32 opts; + const u32 cmd_fis_len = 5; /* five dwords */ + unsigned int n_elem; + + /* + * Fill in command table information. First, the header, + * a SATA Register - Host to Device command FIS. + */ + cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ; + + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl); + if (is_atapi) { + memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); + memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); + } + + n_elem = 0; + if (qc->flags & ATA_QCFLAG_DMAMAP) + n_elem = acard_ahci_fill_sg(qc, cmd_tbl); + + /* + * Fill in command slot information. + * + * ACard note: prd table length not filled in + */ + opts = cmd_fis_len | (qc->dev->link->pmp << 12); + if (qc->tf.flags & ATA_TFLAG_WRITE) + opts |= AHCI_CMD_WRITE; + if (is_atapi) + opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; + + ahci_fill_cmd_slot(pp, qc->tag, opts); +} + +static bool acard_ahci_qc_fill_rtf(struct ata_queued_cmd *qc) +{ + struct ahci_port_priv *pp = qc->ap->private_data; + u8 *rx_fis = pp->rx_fis; + + if (pp->fbs_enabled) + rx_fis += qc->dev->link->pmp * ACARD_AHCI_RX_FIS_SZ; + + /* + * After a successful execution of an ATA PIO data-in command, + * the device doesn't send D2H Reg FIS to update the TF and + * the host should take TF and E_Status from the preceding PIO + * Setup FIS. + */ + if (qc->tf.protocol == ATA_PROT_PIO && qc->dma_dir == DMA_FROM_DEVICE && + !(qc->flags & ATA_QCFLAG_FAILED)) { + ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf); + qc->result_tf.command = (rx_fis + RX_FIS_PIO_SETUP)[15]; + } else + ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf); + + return true; +} + +static int acard_ahci_port_start(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct device *dev = ap->host->dev; + struct ahci_port_priv *pp; + void *mem; + dma_addr_t mem_dma; + size_t dma_sz, rx_fis_sz; + + pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + + /* check FBS capability */ + if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) { + void __iomem *port_mmio = ahci_port_base(ap); + u32 cmd = readl(port_mmio + PORT_CMD); + if (cmd & PORT_CMD_FBSCP) + pp->fbs_supported = true; + else if (hpriv->flags & AHCI_HFLAG_YES_FBS) { + dev_info(dev, "port %d can do FBS, forcing FBSCP\n", + ap->port_no); + pp->fbs_supported = true; + } else + dev_warn(dev, "port %d is not capable of FBS\n", + ap->port_no); + } + + if (pp->fbs_supported) { + dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ; + rx_fis_sz = ACARD_AHCI_RX_FIS_SZ * 16; + } else { + dma_sz = AHCI_PORT_PRIV_DMA_SZ; + rx_fis_sz = ACARD_AHCI_RX_FIS_SZ; + } + + mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL); + if (!mem) + return -ENOMEM; + memset(mem, 0, dma_sz); + + /* + * First item in chunk of DMA memory: 32-slot command table, + * 32 bytes each in size + */ + pp->cmd_slot = mem; + pp->cmd_slot_dma = mem_dma; + + mem += AHCI_CMD_SLOT_SZ; + mem_dma += AHCI_CMD_SLOT_SZ; + + /* + * Second item: Received-FIS area + */ + pp->rx_fis = mem; + pp->rx_fis_dma = mem_dma; + + mem += rx_fis_sz; + mem_dma += rx_fis_sz; + + /* + * Third item: data area for storing a single command + * and its scatter-gather table + */ + pp->cmd_tbl = mem; + pp->cmd_tbl_dma = mem_dma; + + /* + * Save off initial list of interrupts to be enabled. + * This could be changed later + */ + pp->intr_mask = DEF_PORT_IRQ; + + ap->private_data = pp; + + /* engage engines, captain */ + return ahci_port_resume(ap); +} + +static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + unsigned int board_id = ent->driver_data; + struct ata_port_info pi = acard_ahci_port_info[board_id]; + const struct ata_port_info *ppi[] = { &pi, NULL }; + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + struct ata_host *host; + int n_ports, i, rc; + + VPRINTK("ENTER\n"); + + WARN_ON((int)ATA_MAX_QUEUE > AHCI_MAX_CMDS); + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* acquire resources */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* AHCI controllers often implement SFF compatible interface. + * Grab all PCI BARs just in case. + */ + rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + hpriv->flags |= (unsigned long)pi.private_data; + + if (!(hpriv->flags & AHCI_HFLAG_NO_MSI)) + pci_enable_msi(pdev); + + hpriv->mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR]; + + /* save initial config */ + ahci_save_initial_config(&pdev->dev, hpriv); + + /* prepare host */ + if (hpriv->cap & HOST_CAP_NCQ) + pi.flags |= ATA_FLAG_NCQ; + + if (hpriv->cap & HOST_CAP_PMP) + pi.flags |= ATA_FLAG_PMP; + + ahci_set_em_messages(hpriv, &pi); + + /* CAP.NP sometimes indicate the index of the last enabled + * port, at other times, that of the last possible port, so + * determining the maximum port number requires looking at + * both CAP.NP and port_map. + */ + n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + if (!host) + return -ENOMEM; + host->private_data = hpriv; + + if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) + host->flags |= ATA_HOST_PARALLEL_SCAN; + else + printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n"); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar"); + ata_port_pbar_desc(ap, AHCI_PCI_BAR, + 0x100 + ap->port_no * 0x80, "port"); + + rc = ahci_setup_port_privdata(ap); + if (rc) + return rc; + /* set initial link pm policy */ + /* + ap->pm_policy = NOT_AVAILABLE; + */ + /* disabled/not-implemented port */ + if (!(hpriv->port_map & (1 << i))) + ap->ops = &ata_dummy_port_ops; + } + + /* initialize adapter */ + rc = acard_ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64); + if (rc) + return rc; + + rc = ahci_reset_controller(host); + if (rc) + return rc; + + ahci_init_controller(host); + acard_ahci_pci_print_info(host); + + pci_set_master(pdev); + return ahci_host_activate(host, pdev->irq, &acard_ahci_sht); +} + +module_pci_driver(acard_ahci_pci_driver); + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("ACard AHCI SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, acard_ahci_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c new file mode 100644 index 000000000..52d04fc61 --- /dev/null +++ b/drivers/ata/ahci.c @@ -0,0 +1,1564 @@ +/* + * ahci.c - AHCI SATA support + * + * Maintained by: Tejun Heo + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2004-2005 Red Hat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * AHCI hardware documentation: + * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf + * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ahci.h" + +#define DRV_NAME "ahci" +#define DRV_VERSION "3.0" + +enum { + AHCI_PCI_BAR_STA2X11 = 0, + AHCI_PCI_BAR_ENMOTUS = 2, + AHCI_PCI_BAR_STANDARD = 5, +}; + +enum board_ids { + /* board IDs by feature in alphabetical order */ + board_ahci, + board_ahci_ign_iferr, + board_ahci_nomsi, + board_ahci_noncq, + board_ahci_nosntf, + board_ahci_yes_fbs, + + /* board IDs for specific chipsets in alphabetical order */ + board_ahci_avn, + board_ahci_mcp65, + board_ahci_mcp77, + board_ahci_mcp89, + board_ahci_mv, + board_ahci_sb600, + board_ahci_sb700, /* for SB700 and SB800 */ + board_ahci_vt8251, + + /* aliases */ + board_ahci_mcp_linux = board_ahci_mcp65, + board_ahci_mcp67 = board_ahci_mcp65, + board_ahci_mcp73 = board_ahci_mcp65, + board_ahci_mcp79 = board_ahci_mcp77, +}; + +static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static void ahci_mcp89_apple_enable(struct pci_dev *pdev); +static bool is_mcp89_apple(struct pci_dev *pdev); +static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +#ifdef CONFIG_PM +static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); +static int ahci_pci_device_resume(struct pci_dev *pdev); +#endif + +static struct scsi_host_template ahci_sht = { + AHCI_SHT("ahci"), +}; + +static struct ata_port_operations ahci_vt8251_ops = { + .inherits = &ahci_ops, + .hardreset = ahci_vt8251_hardreset, +}; + +static struct ata_port_operations ahci_p5wdh_ops = { + .inherits = &ahci_ops, + .hardreset = ahci_p5wdh_hardreset, +}; + +static struct ata_port_operations ahci_avn_ops = { + .inherits = &ahci_ops, + .hardreset = ahci_avn_hardreset, +}; + +static const struct ata_port_info ahci_port_info[] = { + /* by features */ + [board_ahci] = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, + [board_ahci_ign_iferr] = { + AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, + [board_ahci_nomsi] = { + AHCI_HFLAGS (AHCI_HFLAG_NO_MSI), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, + [board_ahci_noncq] = { + AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, + [board_ahci_nosntf] = { + AHCI_HFLAGS (AHCI_HFLAG_NO_SNTF), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, + [board_ahci_yes_fbs] = { + AHCI_HFLAGS (AHCI_HFLAG_YES_FBS), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, + /* by chipsets */ + [board_ahci_avn] = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_avn_ops, + }, + [board_ahci_mcp65] = { + AHCI_HFLAGS (AHCI_HFLAG_NO_FPDMA_AA | AHCI_HFLAG_NO_PMP | + AHCI_HFLAG_YES_NCQ), + .flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, + [board_ahci_mcp77] = { + AHCI_HFLAGS (AHCI_HFLAG_NO_FPDMA_AA | AHCI_HFLAG_NO_PMP), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, + [board_ahci_mcp89] = { + AHCI_HFLAGS (AHCI_HFLAG_NO_FPDMA_AA), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, + [board_ahci_mv] = { + AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI | + AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP), + .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, + [board_ahci_sb600] = { + AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | + AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255 | + AHCI_HFLAG_32BIT_ONLY), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_pmp_retry_srst_ops, + }, + [board_ahci_sb700] = { /* for SB700 and SB800 */ + AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_pmp_retry_srst_ops, + }, + [board_ahci_vt8251] = { + AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_vt8251_ops, + }, +}; + +static const struct pci_device_id ahci_pci_tbl[] = { + /* Intel */ + { PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */ + { PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */ + { PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */ + { PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */ + { PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */ + { PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */ + { PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */ + { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */ + { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */ + { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */ + { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */ + { PCI_VDEVICE(INTEL, 0x2822), board_ahci_nosntf }, /* ICH8 */ + { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */ + { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */ + { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */ + { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */ + { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */ + { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */ + { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */ + { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */ + { PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */ + { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */ + { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */ + { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */ + { PCI_VDEVICE(INTEL, 0x1c02), board_ahci }, /* CPT AHCI */ + { PCI_VDEVICE(INTEL, 0x1c03), board_ahci }, /* CPT AHCI */ + { PCI_VDEVICE(INTEL, 0x1c04), board_ahci }, /* CPT RAID */ + { PCI_VDEVICE(INTEL, 0x1c05), board_ahci }, /* CPT RAID */ + { PCI_VDEVICE(INTEL, 0x1c06), board_ahci }, /* CPT RAID */ + { PCI_VDEVICE(INTEL, 0x1c07), board_ahci }, /* CPT RAID */ + { PCI_VDEVICE(INTEL, 0x1d02), board_ahci }, /* PBG AHCI */ + { PCI_VDEVICE(INTEL, 0x1d04), board_ahci }, /* PBG RAID */ + { PCI_VDEVICE(INTEL, 0x1d06), board_ahci }, /* PBG RAID */ + { PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* PBG RAID */ + { PCI_VDEVICE(INTEL, 0x2323), board_ahci }, /* DH89xxCC AHCI */ + { PCI_VDEVICE(INTEL, 0x1e02), board_ahci }, /* Panther Point AHCI */ + { PCI_VDEVICE(INTEL, 0x1e03), board_ahci }, /* Panther Point AHCI */ + { PCI_VDEVICE(INTEL, 0x1e04), board_ahci }, /* Panther Point RAID */ + { PCI_VDEVICE(INTEL, 0x1e05), board_ahci }, /* Panther Point RAID */ + { PCI_VDEVICE(INTEL, 0x1e06), board_ahci }, /* Panther Point RAID */ + { PCI_VDEVICE(INTEL, 0x1e07), board_ahci }, /* Panther Point RAID */ + { PCI_VDEVICE(INTEL, 0x1e0e), board_ahci }, /* Panther Point RAID */ + { PCI_VDEVICE(INTEL, 0x8c02), board_ahci }, /* Lynx Point AHCI */ + { PCI_VDEVICE(INTEL, 0x8c03), board_ahci }, /* Lynx Point AHCI */ + { PCI_VDEVICE(INTEL, 0x8c04), board_ahci }, /* Lynx Point RAID */ + { PCI_VDEVICE(INTEL, 0x8c05), board_ahci }, /* Lynx Point RAID */ + { PCI_VDEVICE(INTEL, 0x8c06), board_ahci }, /* Lynx Point RAID */ + { PCI_VDEVICE(INTEL, 0x8c07), board_ahci }, /* Lynx Point RAID */ + { PCI_VDEVICE(INTEL, 0x8c0e), board_ahci }, /* Lynx Point RAID */ + { PCI_VDEVICE(INTEL, 0x8c0f), board_ahci }, /* Lynx Point RAID */ + { PCI_VDEVICE(INTEL, 0x9c02), board_ahci }, /* Lynx Point-LP AHCI */ + { PCI_VDEVICE(INTEL, 0x9c03), board_ahci }, /* Lynx Point-LP AHCI */ + { PCI_VDEVICE(INTEL, 0x9c04), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c05), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c06), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c07), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c0e), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c0f), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x1f22), board_ahci }, /* Avoton AHCI */ + { PCI_VDEVICE(INTEL, 0x1f23), board_ahci }, /* Avoton AHCI */ + { PCI_VDEVICE(INTEL, 0x1f24), board_ahci }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f25), board_ahci }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f26), board_ahci }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f27), board_ahci }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f2e), board_ahci }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f2f), board_ahci }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f32), board_ahci_avn }, /* Avoton AHCI */ + { PCI_VDEVICE(INTEL, 0x1f33), board_ahci_avn }, /* Avoton AHCI */ + { PCI_VDEVICE(INTEL, 0x1f34), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f35), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f36), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f37), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f3e), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f3f), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Wellsburg RAID */ + { PCI_VDEVICE(INTEL, 0x2827), board_ahci }, /* Wellsburg RAID */ + { PCI_VDEVICE(INTEL, 0x8d02), board_ahci }, /* Wellsburg AHCI */ + { PCI_VDEVICE(INTEL, 0x8d04), board_ahci }, /* Wellsburg RAID */ + { PCI_VDEVICE(INTEL, 0x8d06), board_ahci }, /* Wellsburg RAID */ + { PCI_VDEVICE(INTEL, 0x8d0e), board_ahci }, /* Wellsburg RAID */ + { PCI_VDEVICE(INTEL, 0x8d62), board_ahci }, /* Wellsburg AHCI */ + { PCI_VDEVICE(INTEL, 0x8d64), board_ahci }, /* Wellsburg RAID */ + { PCI_VDEVICE(INTEL, 0x8d66), board_ahci }, /* Wellsburg RAID */ + { PCI_VDEVICE(INTEL, 0x8d6e), board_ahci }, /* Wellsburg RAID */ + { PCI_VDEVICE(INTEL, 0x23a3), board_ahci }, /* Coleto Creek AHCI */ + { PCI_VDEVICE(INTEL, 0x9c83), board_ahci }, /* Wildcat Point-LP AHCI */ + { PCI_VDEVICE(INTEL, 0x9c85), board_ahci }, /* Wildcat Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c87), board_ahci }, /* Wildcat Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c8f), board_ahci }, /* Wildcat Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x8c82), board_ahci }, /* 9 Series AHCI */ + { PCI_VDEVICE(INTEL, 0x8c83), board_ahci }, /* 9 Series AHCI */ + { PCI_VDEVICE(INTEL, 0x8c84), board_ahci }, /* 9 Series RAID */ + { PCI_VDEVICE(INTEL, 0x8c85), board_ahci }, /* 9 Series RAID */ + { PCI_VDEVICE(INTEL, 0x8c86), board_ahci }, /* 9 Series RAID */ + { PCI_VDEVICE(INTEL, 0x8c87), board_ahci }, /* 9 Series RAID */ + { PCI_VDEVICE(INTEL, 0x8c8e), board_ahci }, /* 9 Series RAID */ + { PCI_VDEVICE(INTEL, 0x8c8f), board_ahci }, /* 9 Series RAID */ + { PCI_VDEVICE(INTEL, 0x9d03), board_ahci }, /* Sunrise Point-LP AHCI */ + { PCI_VDEVICE(INTEL, 0x9d05), board_ahci }, /* Sunrise Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9d07), board_ahci }, /* Sunrise Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H AHCI */ + { PCI_VDEVICE(INTEL, 0xa105), board_ahci }, /* Sunrise Point-H RAID */ + { PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H RAID */ + { PCI_VDEVICE(INTEL, 0xa10f), board_ahci }, /* Sunrise Point-H RAID */ + + /* JMicron 360/1/3/5/6, match class to avoid IDE function */ + { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr }, + /* JMicron 362B and 362C have an AHCI function with IDE class code */ + { PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr }, + { PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr }, + + /* ATI */ + { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */ + { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb700 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb700 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb700 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb700 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */ + + /* AMD */ + { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */ + { PCI_VDEVICE(AMD, 0x7900), board_ahci }, /* AMD CZ */ + /* AMD is using RAID class only for ahci controllers */ + { PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci }, + + /* VIA */ + { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */ + { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */ + + /* NVIDIA */ + { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci_mcp67 }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci_mcp67 }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci_mcp67 }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci_mcp67 }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci_mcp67 }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci_mcp67 }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci_mcp67 }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci_mcp67 }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci_mcp67 }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_mcp67 }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_mcp67 }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_mcp67 }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0580), board_ahci_mcp_linux }, /* Linux ID */ + { PCI_VDEVICE(NVIDIA, 0x0581), board_ahci_mcp_linux }, /* Linux ID */ + { PCI_VDEVICE(NVIDIA, 0x0582), board_ahci_mcp_linux }, /* Linux ID */ + { PCI_VDEVICE(NVIDIA, 0x0583), board_ahci_mcp_linux }, /* Linux ID */ + { PCI_VDEVICE(NVIDIA, 0x0584), board_ahci_mcp_linux }, /* Linux ID */ + { PCI_VDEVICE(NVIDIA, 0x0585), board_ahci_mcp_linux }, /* Linux ID */ + { PCI_VDEVICE(NVIDIA, 0x0586), board_ahci_mcp_linux }, /* Linux ID */ + { PCI_VDEVICE(NVIDIA, 0x0587), board_ahci_mcp_linux }, /* Linux ID */ + { PCI_VDEVICE(NVIDIA, 0x0588), board_ahci_mcp_linux }, /* Linux ID */ + { PCI_VDEVICE(NVIDIA, 0x0589), board_ahci_mcp_linux }, /* Linux ID */ + { PCI_VDEVICE(NVIDIA, 0x058a), board_ahci_mcp_linux }, /* Linux ID */ + { PCI_VDEVICE(NVIDIA, 0x058b), board_ahci_mcp_linux }, /* Linux ID */ + { PCI_VDEVICE(NVIDIA, 0x058c), board_ahci_mcp_linux }, /* Linux ID */ + { PCI_VDEVICE(NVIDIA, 0x058d), board_ahci_mcp_linux }, /* Linux ID */ + { PCI_VDEVICE(NVIDIA, 0x058e), board_ahci_mcp_linux }, /* Linux ID */ + { PCI_VDEVICE(NVIDIA, 0x058f), board_ahci_mcp_linux }, /* Linux ID */ + { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_mcp73 }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_mcp73 }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_mcp73 }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci_mcp73 }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci_mcp73 }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci_mcp73 }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci_mcp73 }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci_mcp73 }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci_mcp73 }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci_mcp73 }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci_mcp73 }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci_mcp73 }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci_mcp77 }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci_mcp77 }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci_mcp77 }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci_mcp77 }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci_mcp77 }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci_mcp77 }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci_mcp77 }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci_mcp77 }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci_mcp77 }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci_mcp77 }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci_mcp77 }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci_mcp77 }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci_mcp79 }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci_mcp79 }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci_mcp79 }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci_mcp79 }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci_mcp79 }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci_mcp79 }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci_mcp79 }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci_mcp79 }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci_mcp79 }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci_mcp79 }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci_mcp79 }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci_mcp79 }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci_mcp89 }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci_mcp89 }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci_mcp89 }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci_mcp89 }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci_mcp89 }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci_mcp89 }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci_mcp89 }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci_mcp89 }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci_mcp89 }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci_mcp89 }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci_mcp89 }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci_mcp89 }, /* MCP89 */ + + /* SiS */ + { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ + { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 968 */ + { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */ + + /* ST Microelectronics */ + { PCI_VDEVICE(STMICRO, 0xCC06), board_ahci }, /* ST ConneXt */ + + /* Marvell */ + { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ + { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9123), + .class = PCI_CLASS_STORAGE_SATA_AHCI, + .class_mask = 0xffffff, + .driver_data = board_ahci_yes_fbs }, /* 88se9128 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9125), + .driver_data = board_ahci_yes_fbs }, /* 88se9125 */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_MARVELL_EXT, 0x9178, + PCI_VENDOR_ID_MARVELL_EXT, 0x9170), + .driver_data = board_ahci_yes_fbs }, /* 88se9170 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x917a), + .driver_data = board_ahci_yes_fbs }, /* 88se9172 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9172), + .driver_data = board_ahci_yes_fbs }, /* 88se9182 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9182), + .driver_data = board_ahci_yes_fbs }, /* 88se9172 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9192), + .driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0), + .driver_data = board_ahci_yes_fbs }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3), + .driver_data = board_ahci_yes_fbs }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230), + .driver_data = board_ahci_yes_fbs }, + { PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0642), + .driver_data = board_ahci_yes_fbs }, + + /* Promise */ + { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ + { PCI_VDEVICE(PROMISE, 0x3781), board_ahci }, /* FastTrak TX8660 ahci-mode */ + + /* Asmedia */ + { PCI_VDEVICE(ASMEDIA, 0x0601), board_ahci }, /* ASM1060 */ + { PCI_VDEVICE(ASMEDIA, 0x0602), board_ahci }, /* ASM1060 */ + { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */ + { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */ + + /* + * Samsung SSDs found on some macbooks. NCQ times out if MSI is + * enabled. https://bugzilla.kernel.org/show_bug.cgi?id=60731 + */ + { PCI_VDEVICE(SAMSUNG, 0x1600), board_ahci_nomsi }, + { PCI_VDEVICE(SAMSUNG, 0xa800), board_ahci_nomsi }, + + /* Enmotus */ + { PCI_DEVICE(0x1c44, 0x8000), board_ahci }, + + /* Generic, PCI class code for AHCI */ + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, + + { } /* terminate list */ +}; + + +static struct pci_driver ahci_pci_driver = { + .name = DRV_NAME, + .id_table = ahci_pci_tbl, + .probe = ahci_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ahci_pci_device_suspend, + .resume = ahci_pci_device_resume, +#endif +}; + +#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE) +static int marvell_enable; +#else +static int marvell_enable = 1; +#endif +module_param(marvell_enable, int, 0644); +MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)"); + + +static void ahci_pci_save_initial_config(struct pci_dev *pdev, + struct ahci_host_priv *hpriv) +{ + if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) { + dev_info(&pdev->dev, "JMB361 has only one port\n"); + hpriv->force_port_map = 1; + } + + /* + * Temporary Marvell 6145 hack: PATA port presence + * is asserted through the standard AHCI port + * presence register, as bit 4 (counting from 0) + */ + if (hpriv->flags & AHCI_HFLAG_MV_PATA) { + if (pdev->device == 0x6121) + hpriv->mask_port_map = 0x3; + else + hpriv->mask_port_map = 0xf; + dev_info(&pdev->dev, + "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n"); + } + + ahci_save_initial_config(&pdev->dev, hpriv); +} + +static int ahci_pci_reset_controller(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + + ahci_reset_controller(host); + + if (pdev->vendor == PCI_VENDOR_ID_INTEL) { + struct ahci_host_priv *hpriv = host->private_data; + u16 tmp16; + + /* configure PCS */ + pci_read_config_word(pdev, 0x92, &tmp16); + if ((tmp16 & hpriv->port_map) != hpriv->port_map) { + tmp16 |= hpriv->port_map; + pci_write_config_word(pdev, 0x92, tmp16); + } + } + + return 0; +} + +static void ahci_pci_init_controller(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; + struct pci_dev *pdev = to_pci_dev(host->dev); + void __iomem *port_mmio; + u32 tmp; + int mv; + + if (hpriv->flags & AHCI_HFLAG_MV_PATA) { + if (pdev->device == 0x6121) + mv = 2; + else + mv = 4; + port_mmio = __ahci_port_base(host, mv); + + writel(0, port_mmio + PORT_IRQ_MASK); + + /* clear port IRQ */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); + if (tmp) + writel(tmp, port_mmio + PORT_IRQ_STAT); + } + + ahci_init_controller(host); +} + +static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; + bool online; + int rc; + + DPRINTK("ENTER\n"); + + ahci_stop_engine(ap); + + rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), + deadline, &online, NULL); + + hpriv->start_engine(ap); + + DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); + + /* vt8251 doesn't clear BSY on signature FIS reception, + * request follow-up softreset. + */ + return online ? -EAGAIN : rc; +} + +static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + struct ata_taskfile tf; + bool online; + int rc; + + ahci_stop_engine(ap); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.command = ATA_BUSY; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); + + rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), + deadline, &online, NULL); + + hpriv->start_engine(ap); + + /* The pseudo configuration device on SIMG4726 attached to + * ASUS P5W-DH Deluxe doesn't send signature FIS after + * hardreset if no device is attached to the first downstream + * port && the pseudo device locks up on SRST w/ PMP==0. To + * work around this, wait for !BSY only briefly. If BSY isn't + * cleared, perform CLO and proceed to IDENTIFY (achieved by + * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA). + * + * Wait for two seconds. Devices attached to downstream port + * which can't process the following IDENTIFY after this will + * have to be reset again. For most cases, this should + * suffice while making probing snappish enough. + */ + if (online) { + rc = ata_wait_after_reset(link, jiffies + 2 * HZ, + ahci_check_ready); + if (rc) + ahci_kick_engine(ap); + } + return rc; +} + +/* + * ahci_avn_hardreset - attempt more aggressive recovery of Avoton ports. + * + * It has been observed with some SSDs that the timing of events in the + * link synchronization phase can leave the port in a state that can not + * be recovered by a SATA-hard-reset alone. The failing signature is + * SStatus.DET stuck at 1 ("Device presence detected but Phy + * communication not established"). It was found that unloading and + * reloading the driver when this problem occurs allows the drive + * connection to be recovered (DET advanced to 0x3). The critical + * component of reloading the driver is that the port state machines are + * reset by bouncing "port enable" in the AHCI PCS configuration + * register. So, reproduce that effect by bouncing a port whenever we + * see DET==1 after a reset. + */ +static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + unsigned long tmo = deadline - jiffies; + struct ata_taskfile tf; + bool online; + int rc, i; + + DPRINTK("ENTER\n"); + + ahci_stop_engine(ap); + + for (i = 0; i < 2; i++) { + u16 val; + u32 sstatus; + int port = ap->port_no; + struct ata_host *host = ap->host; + struct pci_dev *pdev = to_pci_dev(host->dev); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.command = ATA_BUSY; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); + + rc = sata_link_hardreset(link, timing, deadline, &online, + ahci_check_ready); + + if (sata_scr_read(link, SCR_STATUS, &sstatus) != 0 || + (sstatus & 0xf) != 1) + break; + + ata_link_printk(link, KERN_INFO, "avn bounce port%d\n", + port); + + pci_read_config_word(pdev, 0x92, &val); + val &= ~(1 << port); + pci_write_config_word(pdev, 0x92, val); + ata_msleep(ap, 1000); + val |= 1 << port; + pci_write_config_word(pdev, 0x92, val); + deadline += tmo; + } + + hpriv->start_engine(ap); + + if (online) + *class = ahci_dev_classify(ap); + + DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); + return rc; +} + + +#ifdef CONFIG_PM +static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host *host = pci_get_drvdata(pdev); + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->mmio; + u32 ctl; + + if (mesg.event & PM_EVENT_SUSPEND && + hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { + dev_err(&pdev->dev, + "BIOS update required for suspend/resume\n"); + return -EIO; + } + + if (mesg.event & PM_EVENT_SLEEP) { + /* AHCI spec rev1.1 section 8.3.3: + * Software must disable interrupts prior to requesting a + * transition of the HBA to D3 state. + */ + ctl = readl(mmio + HOST_CTL); + ctl &= ~HOST_IRQ_EN; + writel(ctl, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + } + + return ata_pci_device_suspend(pdev, mesg); +} + +static int ahci_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + /* Apple BIOS helpfully mangles the registers on resume */ + if (is_mcp89_apple(pdev)) + ahci_mcp89_apple_enable(pdev); + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { + rc = ahci_pci_reset_controller(host); + if (rc) + return rc; + + ahci_pci_init_controller(host); + } + + ata_host_resume(host); + + return 0; +} +#endif + +static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac) +{ + int rc; + + /* + * If the device fixup already set the dma_mask to some non-standard + * value, don't extend it here. This happens on STA2X11, for example. + */ + if (pdev->dma_mask && pdev->dma_mask < DMA_BIT_MASK(32)) + return 0; + + if (using_dac && + !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) { + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + if (rc) { + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, + "64-bit DMA enable failed\n"); + return rc; + } + } + } else { + rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, "32-bit DMA enable failed\n"); + return rc; + } + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, + "32-bit consistent DMA enable failed\n"); + return rc; + } + } + return 0; +} + +static void ahci_pci_print_info(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + u16 cc; + const char *scc_s; + + pci_read_config_word(pdev, 0x0a, &cc); + if (cc == PCI_CLASS_STORAGE_IDE) + scc_s = "IDE"; + else if (cc == PCI_CLASS_STORAGE_SATA) + scc_s = "SATA"; + else if (cc == PCI_CLASS_STORAGE_RAID) + scc_s = "RAID"; + else + scc_s = "unknown"; + + ahci_print_info(host, scc_s); +} + +/* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is + * hardwired to on-board SIMG 4726. The chipset is ICH8 and doesn't + * support PMP and the 4726 either directly exports the device + * attached to the first downstream port or acts as a hardware storage + * controller and emulate a single ATA device (can be RAID 0/1 or some + * other configuration). + * + * When there's no device attached to the first downstream port of the + * 4726, "Config Disk" appears, which is a pseudo ATA device to + * configure the 4726. However, ATA emulation of the device is very + * lame. It doesn't send signature D2H Reg FIS after the initial + * hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues. + * + * The following function works around the problem by always using + * hardreset on the port and not depending on receiving signature FIS + * afterward. If signature FIS isn't received soon, ATA class is + * assumed without follow-up softreset. + */ +static void ahci_p5wdh_workaround(struct ata_host *host) +{ + static const struct dmi_system_id sysids[] = { + { + .ident = "P5W DH Deluxe", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "ASUSTEK COMPUTER INC"), + DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"), + }, + }, + { } + }; + struct pci_dev *pdev = to_pci_dev(host->dev); + + if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) && + dmi_check_system(sysids)) { + struct ata_port *ap = host->ports[1]; + + dev_info(&pdev->dev, + "enabling ASUS P5W DH Deluxe on-board SIMG4726 workaround\n"); + + ap->ops = &ahci_p5wdh_ops; + ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA; + } +} + +/* + * Macbook7,1 firmware forcibly disables MCP89 AHCI and changes PCI ID when + * booting in BIOS compatibility mode. We restore the registers but not ID. + */ +static void ahci_mcp89_apple_enable(struct pci_dev *pdev) +{ + u32 val; + + printk(KERN_INFO "ahci: enabling MCP89 AHCI mode\n"); + + pci_read_config_dword(pdev, 0xf8, &val); + val |= 1 << 0x1b; + /* the following changes the device ID, but appears not to affect function */ + /* val = (val & ~0xf0000000) | 0x80000000; */ + pci_write_config_dword(pdev, 0xf8, val); + + pci_read_config_dword(pdev, 0x54c, &val); + val |= 1 << 0xc; + pci_write_config_dword(pdev, 0x54c, val); + + pci_read_config_dword(pdev, 0x4a4, &val); + val &= 0xff; + val |= 0x01060100; + pci_write_config_dword(pdev, 0x4a4, val); + + pci_read_config_dword(pdev, 0x54c, &val); + val &= ~(1 << 0xc); + pci_write_config_dword(pdev, 0x54c, val); + + pci_read_config_dword(pdev, 0xf8, &val); + val &= ~(1 << 0x1b); + pci_write_config_dword(pdev, 0xf8, val); +} + +static bool is_mcp89_apple(struct pci_dev *pdev) +{ + return pdev->vendor == PCI_VENDOR_ID_NVIDIA && + pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA && + pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE && + pdev->subsystem_device == 0xcb89; +} + +/* only some SB600 ahci controllers can do 64bit DMA */ +static bool ahci_sb600_enable_64bit(struct pci_dev *pdev) +{ + static const struct dmi_system_id sysids[] = { + /* + * The oldest version known to be broken is 0901 and + * working is 1501 which was released on 2007-10-26. + * Enable 64bit DMA on 1501 and anything newer. + * + * Please read bko#9412 for more info. + */ + { + .ident = "ASUS M2A-VM", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, + "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "M2A-VM"), + }, + .driver_data = "20071026", /* yyyymmdd */ + }, + /* + * All BIOS versions for the MSI K9A2 Platinum (MS-7376) + * support 64bit DMA. + * + * BIOS versions earlier than 1.5 had the Manufacturer DMI + * fields as "MICRO-STAR INTERANTIONAL CO.,LTD". + * This spelling mistake was fixed in BIOS version 1.5, so + * 1.5 and later have the Manufacturer as + * "MICRO-STAR INTERNATIONAL CO.,LTD". + * So try to match on DMI_BOARD_VENDOR of "MICRO-STAR INTER". + * + * BIOS versions earlier than 1.9 had a Board Product Name + * DMI field of "MS-7376". This was changed to be + * "K9A2 Platinum (MS-7376)" in version 1.9, but we can still + * match on DMI_BOARD_NAME of "MS-7376". + */ + { + .ident = "MSI K9A2 Platinum", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, + "MICRO-STAR INTER"), + DMI_MATCH(DMI_BOARD_NAME, "MS-7376"), + }, + }, + /* + * All BIOS versions for the MSI K9AGM2 (MS-7327) support + * 64bit DMA. + * + * This board also had the typo mentioned above in the + * Manufacturer DMI field (fixed in BIOS version 1.5), so + * match on DMI_BOARD_VENDOR of "MICRO-STAR INTER" again. + */ + { + .ident = "MSI K9AGM2", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, + "MICRO-STAR INTER"), + DMI_MATCH(DMI_BOARD_NAME, "MS-7327"), + }, + }, + /* + * All BIOS versions for the Asus M3A support 64bit DMA. + * (all release versions from 0301 to 1206 were tested) + */ + { + .ident = "ASUS M3A", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, + "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "M3A"), + }, + }, + { } + }; + const struct dmi_system_id *match; + int year, month, date; + char buf[9]; + + match = dmi_first_match(sysids); + if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) || + !match) + return false; + + if (!match->driver_data) + goto enable_64bit; + + dmi_get_date(DMI_BIOS_DATE, &year, &month, &date); + snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date); + + if (strcmp(buf, match->driver_data) >= 0) + goto enable_64bit; + else { + dev_warn(&pdev->dev, + "%s: BIOS too old, forcing 32bit DMA, update BIOS\n", + match->ident); + return false; + } + +enable_64bit: + dev_warn(&pdev->dev, "%s: enabling 64bit DMA\n", match->ident); + return true; +} + +static bool ahci_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq nx6310", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, + { + .ident = "HP Compaq 6720s", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6720s"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + +static bool ahci_broken_suspend(struct pci_dev *pdev) +{ + static const struct dmi_system_id sysids[] = { + /* + * On HP dv[4-6] and HDX18 with earlier BIOSen, link + * to the harddisk doesn't become online after + * resuming from STR. Warn and fail suspend. + * + * http://bugzilla.kernel.org/show_bug.cgi?id=12276 + * + * Use dates instead of versions to match as HP is + * apparently recycling both product and version + * strings. + * + * http://bugzilla.kernel.org/show_bug.cgi?id=15462 + */ + { + .ident = "dv4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, + "HP Pavilion dv4 Notebook PC"), + }, + .driver_data = "20090105", /* F.30 */ + }, + { + .ident = "dv5", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, + "HP Pavilion dv5 Notebook PC"), + }, + .driver_data = "20090506", /* F.16 */ + }, + { + .ident = "dv6", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, + "HP Pavilion dv6 Notebook PC"), + }, + .driver_data = "20090423", /* F.21 */ + }, + { + .ident = "HDX18", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, + "HP HDX18 Notebook PC"), + }, + .driver_data = "20090430", /* F.23 */ + }, + /* + * Acer eMachines G725 has the same problem. BIOS + * V1.03 is known to be broken. V3.04 is known to + * work. Between, there are V1.06, V2.06 and V3.03 + * that we don't have much idea about. For now, + * blacklist anything older than V3.04. + * + * http://bugzilla.kernel.org/show_bug.cgi?id=15104 + */ + { + .ident = "G725", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "eMachines"), + DMI_MATCH(DMI_PRODUCT_NAME, "eMachines G725"), + }, + .driver_data = "20091216", /* V3.04 */ + }, + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(sysids); + int year, month, date; + char buf[9]; + + if (!dmi || pdev->bus->number || pdev->devfn != PCI_DEVFN(0x1f, 2)) + return false; + + dmi_get_date(DMI_BIOS_DATE, &year, &month, &date); + snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date); + + return strcmp(buf, dmi->driver_data) < 0; +} + +static bool ahci_broken_online(struct pci_dev *pdev) +{ +#define ENCODE_BUSDEVFN(bus, slot, func) \ + (void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func))) + static const struct dmi_system_id sysids[] = { + /* + * There are several gigabyte boards which use + * SIMG5723s configured as hardware RAID. Certain + * 5723 firmware revisions shipped there keep the link + * online but fail to answer properly to SRST or + * IDENTIFY when no device is attached downstream + * causing libata to retry quite a few times leading + * to excessive detection delay. + * + * As these firmwares respond to the second reset try + * with invalid device signature, considering unknown + * sig as offline works around the problem acceptably. + */ + { + .ident = "EP45-DQ6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, + "Gigabyte Technology Co., Ltd."), + DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"), + }, + .driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0), + }, + { + .ident = "EP45-DS5", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, + "Gigabyte Technology Co., Ltd."), + DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"), + }, + .driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0), + }, + { } /* terminate list */ + }; +#undef ENCODE_BUSDEVFN + const struct dmi_system_id *dmi = dmi_first_match(sysids); + unsigned int val; + + if (!dmi) + return false; + + val = (unsigned long)dmi->driver_data; + + return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff); +} + +static bool ahci_broken_devslp(struct pci_dev *pdev) +{ + /* device with broken DEVSLP but still showing SDS capability */ + static const struct pci_device_id ids[] = { + { PCI_VDEVICE(INTEL, 0x0f23)}, /* Valleyview SoC */ + {} + }; + + return pci_match_id(ids, pdev); +} + +#ifdef CONFIG_ATA_ACPI +static void ahci_gtf_filter_workaround(struct ata_host *host) +{ + static const struct dmi_system_id sysids[] = { + /* + * Aspire 3810T issues a bunch of SATA enable commands + * via _GTF including an invalid one and one which is + * rejected by the device. Among the successful ones + * is FPDMA non-zero offset enable which when enabled + * only on the drive side leads to NCQ command + * failures. Filter it out. + */ + { + .ident = "Aspire 3810T", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3810T"), + }, + .driver_data = (void *)ATA_ACPI_FILTER_FPDMA_OFFSET, + }, + { } + }; + const struct dmi_system_id *dmi = dmi_first_match(sysids); + unsigned int filter; + int i; + + if (!dmi) + return; + + filter = (unsigned long)dmi->driver_data; + dev_info(host->dev, "applying extra ACPI _GTF filter 0x%x for %s\n", + filter, dmi->ident); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + struct ata_link *link; + struct ata_device *dev; + + ata_for_each_link(link, ap, EDGE) + ata_for_each_dev(dev, link, ALL) + dev->gtf_filter |= filter; + } +} +#else +static inline void ahci_gtf_filter_workaround(struct ata_host *host) +{} +#endif + +static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, + struct ahci_host_priv *hpriv) +{ + int rc, nvec; + + if (hpriv->flags & AHCI_HFLAG_NO_MSI) + goto intx; + + nvec = pci_msi_vec_count(pdev); + if (nvec < 0) + goto intx; + + /* + * If number of MSIs is less than number of ports then Sharing Last + * Message mode could be enforced. In this case assume that advantage + * of multipe MSIs is negated and use single MSI mode instead. + */ + if (nvec < n_ports) + goto single_msi; + + rc = pci_enable_msi_exact(pdev, nvec); + if (rc == -ENOSPC) + goto single_msi; + else if (rc < 0) + goto intx; + + /* fallback to single MSI mode if the controller enforced MRSM mode */ + if (readl(hpriv->mmio + HOST_CTL) & HOST_MRSM) { + pci_disable_msi(pdev); + printk(KERN_INFO "ahci: MRSM is on, fallback to single MSI\n"); + goto single_msi; + } + + if (nvec > 1) + hpriv->flags |= AHCI_HFLAG_MULTI_MSI; + + return nvec; + +single_msi: + if (pci_enable_msi(pdev)) + goto intx; + return 1; + +intx: + pci_intx(pdev, 1); + return 0; +} + +static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + unsigned int board_id = ent->driver_data; + struct ata_port_info pi = ahci_port_info[board_id]; + const struct ata_port_info *ppi[] = { &pi, NULL }; + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + struct ata_host *host; + int n_ports, i, rc; + int ahci_pci_bar = AHCI_PCI_BAR_STANDARD; + + VPRINTK("ENTER\n"); + + WARN_ON((int)ATA_MAX_QUEUE > AHCI_MAX_CMDS); + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* The AHCI driver can only drive the SATA ports, the PATA driver + can drive them all so if both drivers are selected make sure + AHCI stays out of the way */ + if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable) + return -ENODEV; + + /* Apple BIOS on MCP89 prevents us using AHCI */ + if (is_mcp89_apple(pdev)) + ahci_mcp89_apple_enable(pdev); + + /* Promise's PDC42819 is a SAS/SATA controller that has an AHCI mode. + * At the moment, we can only use the AHCI mode. Let the users know + * that for SAS drives they're out of luck. + */ + if (pdev->vendor == PCI_VENDOR_ID_PROMISE) + dev_info(&pdev->dev, + "PDC42819 can only drive SATA devices with this driver\n"); + + /* Both Connext and Enmotus devices use non-standard BARs */ + if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06) + ahci_pci_bar = AHCI_PCI_BAR_STA2X11; + else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000) + ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS; + + /* + * The JMicron chip 361/363 contains one SATA controller and one + * PATA controller,for powering on these both controllers, we must + * follow the sequence one by one, otherwise one of them can not be + * powered on successfully, so here we disable the async suspend + * method for these chips. + */ + if (pdev->vendor == PCI_VENDOR_ID_JMICRON && + (pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 || + pdev->device == PCI_DEVICE_ID_JMICRON_JMB361)) + device_disable_async_suspend(&pdev->dev); + + /* acquire resources */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + (pdev->device == 0x2652 || pdev->device == 0x2653)) { + u8 map; + + /* ICH6s share the same PCI ID for both piix and ahci + * modes. Enabling ahci mode while MAP indicates + * combined mode is a bad idea. Yield to ata_piix. + */ + pci_read_config_byte(pdev, ICH_MAP, &map); + if (map & 0x3) { + dev_info(&pdev->dev, + "controller is in combined mode, can't enable AHCI mode\n"); + return -ENODEV; + } + } + + /* AHCI controllers often implement SFF compatible interface. + * Grab all PCI BARs just in case. + */ + rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + hpriv->flags |= (unsigned long)pi.private_data; + + /* MCP65 revision A1 and A2 can't do MSI */ + if (board_id == board_ahci_mcp65 && + (pdev->revision == 0xa1 || pdev->revision == 0xa2)) + hpriv->flags |= AHCI_HFLAG_NO_MSI; + + /* SB800 does NOT need the workaround to ignore SERR_INTERNAL */ + if (board_id == board_ahci_sb700 && pdev->revision >= 0x40) + hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL; + + /* only some SB600s can do 64bit DMA */ + if (ahci_sb600_enable_64bit(pdev)) + hpriv->flags &= ~AHCI_HFLAG_32BIT_ONLY; + + hpriv->mmio = pcim_iomap_table(pdev)[ahci_pci_bar]; + + /* must set flag prior to save config in order to take effect */ + if (ahci_broken_devslp(pdev)) + hpriv->flags |= AHCI_HFLAG_NO_DEVSLP; + + /* save initial config */ + ahci_pci_save_initial_config(pdev, hpriv); + + /* prepare host */ + if (hpriv->cap & HOST_CAP_NCQ) { + pi.flags |= ATA_FLAG_NCQ; + /* + * Auto-activate optimization is supposed to be + * supported on all AHCI controllers indicating NCQ + * capability, but it seems to be broken on some + * chipsets including NVIDIAs. + */ + if (!(hpriv->flags & AHCI_HFLAG_NO_FPDMA_AA)) + pi.flags |= ATA_FLAG_FPDMA_AA; + + /* + * All AHCI controllers should be forward-compatible + * with the new auxiliary field. This code should be + * conditionalized if any buggy AHCI controllers are + * encountered. + */ + pi.flags |= ATA_FLAG_FPDMA_AUX; + } + + if (hpriv->cap & HOST_CAP_PMP) + pi.flags |= ATA_FLAG_PMP; + + ahci_set_em_messages(hpriv, &pi); + + if (ahci_broken_system_poweroff(pdev)) { + pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN; + dev_info(&pdev->dev, + "quirky BIOS, skipping spindown on poweroff\n"); + } + + if (ahci_broken_suspend(pdev)) { + hpriv->flags |= AHCI_HFLAG_NO_SUSPEND; + dev_warn(&pdev->dev, + "BIOS update required for suspend/resume\n"); + } + + if (ahci_broken_online(pdev)) { + hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE; + dev_info(&pdev->dev, + "online status unreliable, applying workaround\n"); + } + + /* CAP.NP sometimes indicate the index of the last enabled + * port, at other times, that of the last possible port, so + * determining the maximum port number requires looking at + * both CAP.NP and port_map. + */ + n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); + + ahci_init_interrupts(pdev, n_ports, hpriv); + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + if (!host) + return -ENOMEM; + host->private_data = hpriv; + + if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) + host->flags |= ATA_HOST_PARALLEL_SCAN; + else + dev_info(&pdev->dev, "SSS flag set, parallel bus scan disabled\n"); + + if (pi.flags & ATA_FLAG_EM) + ahci_reset_em(host); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + ata_port_pbar_desc(ap, ahci_pci_bar, -1, "abar"); + ata_port_pbar_desc(ap, ahci_pci_bar, + 0x100 + ap->port_no * 0x80, "port"); + + /* set enclosure management message type */ + if (ap->flags & ATA_FLAG_EM) + ap->em_message_type = hpriv->em_msg_type; + + rc = ahci_setup_port_privdata(ap); + if (rc) + return rc; + + /* disabled/not-implemented port */ + if (!(hpriv->port_map & (1 << i))) + ap->ops = &ata_dummy_port_ops; + } + + /* apply workaround for ASUS P5W DH Deluxe mainboard */ + ahci_p5wdh_workaround(host); + + /* apply gtf filter quirk */ + ahci_gtf_filter_workaround(host); + + /* initialize adapter */ + rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64); + if (rc) + return rc; + + rc = ahci_pci_reset_controller(host); + if (rc) + return rc; + + ahci_pci_init_controller(host); + ahci_pci_print_info(host); + + pci_set_master(pdev); + + return ahci_host_activate(host, pdev->irq, &ahci_sht); +} + +module_pci_driver(ahci_pci_driver); + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("AHCI SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ahci_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h new file mode 100644 index 000000000..c1a4b6ac0 --- /dev/null +++ b/drivers/ata/ahci.h @@ -0,0 +1,426 @@ +/* + * ahci.h - Common AHCI SATA definitions and declarations + * + * Maintained by: Tejun Heo + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2004-2005 Red Hat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * AHCI hardware documentation: + * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf + * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf + * + */ + +#ifndef _AHCI_H +#define _AHCI_H + +#include +#include +#include +#include + +/* Enclosure Management Control */ +#define EM_CTRL_MSG_TYPE 0x000f0000 + +/* Enclosure Management LED Message Type */ +#define EM_MSG_LED_HBA_PORT 0x0000000f +#define EM_MSG_LED_PMP_SLOT 0x0000ff00 +#define EM_MSG_LED_VALUE 0xffff0000 +#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000 +#define EM_MSG_LED_VALUE_OFF 0xfff80000 +#define EM_MSG_LED_VALUE_ON 0x00010000 + +enum { + AHCI_MAX_PORTS = 32, + AHCI_MAX_CLKS = 5, + AHCI_MAX_SG = 168, /* hardware max is 64K */ + AHCI_DMA_BOUNDARY = 0xffffffff, + AHCI_MAX_CMDS = 32, + AHCI_CMD_SZ = 32, + AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ, + AHCI_RX_FIS_SZ = 256, + AHCI_CMD_TBL_CDB = 0x40, + AHCI_CMD_TBL_HDR_SZ = 0x80, + AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16), + AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS, + AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + + AHCI_RX_FIS_SZ, + AHCI_PORT_PRIV_FBS_DMA_SZ = AHCI_CMD_SLOT_SZ + + AHCI_CMD_TBL_AR_SZ + + (AHCI_RX_FIS_SZ * 16), + AHCI_IRQ_ON_SG = (1 << 31), + AHCI_CMD_ATAPI = (1 << 5), + AHCI_CMD_WRITE = (1 << 6), + AHCI_CMD_PREFETCH = (1 << 7), + AHCI_CMD_RESET = (1 << 8), + AHCI_CMD_CLR_BUSY = (1 << 10), + + RX_FIS_PIO_SETUP = 0x20, /* offset of PIO Setup FIS data */ + RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ + RX_FIS_SDB = 0x58, /* offset of SDB FIS data */ + RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */ + + /* global controller registers */ + HOST_CAP = 0x00, /* host capabilities */ + HOST_CTL = 0x04, /* global host control */ + HOST_IRQ_STAT = 0x08, /* interrupt status */ + HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */ + HOST_VERSION = 0x10, /* AHCI spec. version compliancy */ + HOST_EM_LOC = 0x1c, /* Enclosure Management location */ + HOST_EM_CTL = 0x20, /* Enclosure Management Control */ + HOST_CAP2 = 0x24, /* host capabilities, extended */ + + /* HOST_CTL bits */ + HOST_RESET = (1 << 0), /* reset controller; self-clear */ + HOST_IRQ_EN = (1 << 1), /* global IRQ enable */ + HOST_MRSM = (1 << 2), /* MSI Revert to Single Message */ + HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ + + /* HOST_CAP bits */ + HOST_CAP_SXS = (1 << 5), /* Supports External SATA */ + HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */ + HOST_CAP_CCC = (1 << 7), /* Command Completion Coalescing */ + HOST_CAP_PART = (1 << 13), /* Partial state capable */ + HOST_CAP_SSC = (1 << 14), /* Slumber state capable */ + HOST_CAP_PIO_MULTI = (1 << 15), /* PIO multiple DRQ support */ + HOST_CAP_FBS = (1 << 16), /* FIS-based switching support */ + HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */ + HOST_CAP_ONLY = (1 << 18), /* Supports AHCI mode only */ + HOST_CAP_CLO = (1 << 24), /* Command List Override support */ + HOST_CAP_LED = (1 << 25), /* Supports activity LED */ + HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */ + HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ + HOST_CAP_MPS = (1 << 28), /* Mechanical presence switch */ + HOST_CAP_SNTF = (1 << 29), /* SNotification register */ + HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ + HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ + + /* HOST_CAP2 bits */ + HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */ + HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */ + HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */ + HOST_CAP2_SDS = (1 << 3), /* Support device sleep */ + HOST_CAP2_SADM = (1 << 4), /* Support aggressive DevSlp */ + HOST_CAP2_DESO = (1 << 5), /* DevSlp from slumber only */ + + /* registers for each SATA port */ + PORT_LST_ADDR = 0x00, /* command list DMA addr */ + PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */ + PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */ + PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */ + PORT_IRQ_STAT = 0x10, /* interrupt status */ + PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */ + PORT_CMD = 0x18, /* port command */ + PORT_TFDATA = 0x20, /* taskfile data */ + PORT_SIG = 0x24, /* device TF signature */ + PORT_CMD_ISSUE = 0x38, /* command issue */ + PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */ + PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */ + PORT_SCR_ERR = 0x30, /* SATA phy register: SError */ + PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ + PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */ + PORT_FBS = 0x40, /* FIS-based Switching */ + PORT_DEVSLP = 0x44, /* device sleep */ + + /* PORT_IRQ_{STAT,MASK} bits */ + PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ + PORT_IRQ_TF_ERR = (1 << 30), /* task file error */ + PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */ + PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */ + PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */ + PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */ + PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */ + PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */ + + PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */ + PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */ + PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */ + PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */ + PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */ + PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */ + PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */ + PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */ + PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */ + + PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR | + PORT_IRQ_IF_ERR | + PORT_IRQ_CONNECT | + PORT_IRQ_PHYRDY | + PORT_IRQ_UNK_FIS | + PORT_IRQ_BAD_PMP, + PORT_IRQ_ERROR = PORT_IRQ_FREEZE | + PORT_IRQ_TF_ERR | + PORT_IRQ_HBUS_DATA_ERR, + DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | + PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | + PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS, + + /* PORT_CMD bits */ + PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */ + PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */ + PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ + PORT_CMD_FBSCP = (1 << 22), /* FBS Capable Port */ + PORT_CMD_PMP = (1 << 17), /* PMP attached */ + PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ + PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ + PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */ + PORT_CMD_CLO = (1 << 3), /* Command list override */ + PORT_CMD_POWER_ON = (1 << 2), /* Power up device */ + PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */ + PORT_CMD_START = (1 << 0), /* Enable port DMA engine */ + + PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */ + PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */ + PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ + PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ + + /* PORT_FBS bits */ + PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */ + PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */ + PORT_FBS_DEV_OFFSET = 8, /* FBS device to issue offset */ + PORT_FBS_DEV_MASK = (0xf << PORT_FBS_DEV_OFFSET), /* FBS.DEV */ + PORT_FBS_SDE = (1 << 2), /* FBS single device error */ + PORT_FBS_DEC = (1 << 1), /* FBS device error clear */ + PORT_FBS_EN = (1 << 0), /* Enable FBS */ + + /* PORT_DEVSLP bits */ + PORT_DEVSLP_DM_OFFSET = 25, /* DITO multiplier offset */ + PORT_DEVSLP_DM_MASK = (0xf << 25), /* DITO multiplier mask */ + PORT_DEVSLP_DITO_OFFSET = 15, /* DITO offset */ + PORT_DEVSLP_MDAT_OFFSET = 10, /* Minimum assertion time */ + PORT_DEVSLP_DETO_OFFSET = 2, /* DevSlp exit timeout */ + PORT_DEVSLP_DSP = (1 << 1), /* DevSlp present */ + PORT_DEVSLP_ADSE = (1 << 0), /* Aggressive DevSlp enable */ + + /* hpriv->flags bits */ + +#define AHCI_HFLAGS(flags) .private_data = (void *)(flags) + + AHCI_HFLAG_NO_NCQ = (1 << 0), + AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */ + AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */ + AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */ + AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */ + AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */ + AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ + AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ + AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ + AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */ + AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as + link offline */ + AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */ + AHCI_HFLAG_NO_FPDMA_AA = (1 << 13), /* no FPDMA AA */ + AHCI_HFLAG_YES_FBS = (1 << 14), /* force FBS cap on */ + AHCI_HFLAG_DELAY_ENGINE = (1 << 15), /* do not start engine on + port start (wait until + error-handling stage) */ + AHCI_HFLAG_MULTI_MSI = (1 << 16), /* multiple PCI MSIs */ + AHCI_HFLAG_NO_DEVSLP = (1 << 17), /* no device sleep */ + AHCI_HFLAG_NO_FBS = (1 << 18), /* no FBS */ + + /* ap->flags bits */ + + AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | + ATA_FLAG_ACPI_SATA | ATA_FLAG_AN, + + ICH_MAP = 0x90, /* ICH MAP register */ + + /* em constants */ + EM_MAX_SLOTS = 8, + EM_MAX_RETRY = 5, + + /* em_ctl bits */ + EM_CTL_RST = (1 << 9), /* Reset */ + EM_CTL_TM = (1 << 8), /* Transmit Message */ + EM_CTL_MR = (1 << 0), /* Message Received */ + EM_CTL_ALHD = (1 << 26), /* Activity LED */ + EM_CTL_XMT = (1 << 25), /* Transmit Only */ + EM_CTL_SMB = (1 << 24), /* Single Message Buffer */ + EM_CTL_SGPIO = (1 << 19), /* SGPIO messages supported */ + EM_CTL_SES = (1 << 18), /* SES-2 messages supported */ + EM_CTL_SAFTE = (1 << 17), /* SAF-TE messages supported */ + EM_CTL_LED = (1 << 16), /* LED messages supported */ + + /* em message type */ + EM_MSG_TYPE_LED = (1 << 0), /* LED */ + EM_MSG_TYPE_SAFTE = (1 << 1), /* SAF-TE */ + EM_MSG_TYPE_SES2 = (1 << 2), /* SES-2 */ + EM_MSG_TYPE_SGPIO = (1 << 3), /* SGPIO */ +}; + +struct ahci_cmd_hdr { + __le32 opts; + __le32 status; + __le32 tbl_addr; + __le32 tbl_addr_hi; + __le32 reserved[4]; +}; + +struct ahci_sg { + __le32 addr; + __le32 addr_hi; + __le32 reserved; + __le32 flags_size; +}; + +struct ahci_em_priv { + enum sw_activity blink_policy; + struct timer_list timer; + unsigned long saved_activity; + unsigned long activity; + unsigned long led_state; +}; + +struct ahci_port_priv { + struct ata_link *active_link; + struct ahci_cmd_hdr *cmd_slot; + dma_addr_t cmd_slot_dma; + void *cmd_tbl; + dma_addr_t cmd_tbl_dma; + void *rx_fis; + dma_addr_t rx_fis_dma; + /* for NCQ spurious interrupt analysis */ + unsigned int ncq_saw_d2h:1; + unsigned int ncq_saw_dmas:1; + unsigned int ncq_saw_sdb:1; + atomic_t intr_status; /* interrupts to handle */ + spinlock_t lock; /* protects parent ata_port */ + u32 intr_mask; /* interrupts to enable */ + bool fbs_supported; /* set iff FBS is supported */ + bool fbs_enabled; /* set iff FBS is enabled */ + int fbs_last_dev; /* save FBS.DEV of last FIS */ + /* enclosure management info per PM slot */ + struct ahci_em_priv em_priv[EM_MAX_SLOTS]; + char *irq_desc; /* desc in /proc/interrupts */ + bool init_alpe; /* alpe enabled by default */ + bool init_asp; /* asp enabled by default */ + bool init_devslp; /* devslp enabled by default */ + u32 init_dito; /* initial dito configuration */ + u32 init_deto; /* initial deto configuration */ + u32 init_mdat; /* initial mdat configuration */ +}; + +struct ahci_host_priv { + /* Input fields */ + unsigned int flags; /* AHCI_HFLAG_* */ + u32 force_port_map; /* force port map */ + u32 mask_port_map; /* mask out particular bits */ + + void __iomem * mmio; /* bus-independent mem map */ + u32 cap; /* cap to use */ + u32 cap2; /* cap2 to use */ + u32 port_map; /* port map to use */ + u32 saved_cap; /* saved initial cap */ + u32 saved_cap2; /* saved initial cap2 */ + u32 saved_port_map; /* saved initial port_map */ + u32 em_loc; /* enclosure management location */ + u32 em_buf_sz; /* EM buffer size in byte */ + u32 em_msg_type; /* EM message type */ + bool got_runtime_pm; /* Did we do pm_runtime_get? */ + struct clk *clks[AHCI_MAX_CLKS]; /* Optional */ + struct regulator **target_pwrs; /* Optional */ + /* + * If platform uses PHYs. There is a 1:1 relation between the port number and + * the PHY position in this array. + */ + struct phy **phys; + unsigned nports; /* Number of ports */ + void *plat_data; /* Other platform data */ + /* + * Optional ahci_start_engine override, if not set this gets set to the + * default ahci_start_engine during ahci_save_initial_config, this can + * be overridden anytime before the host is activated. + */ + void (*start_engine)(struct ata_port *ap); +}; + +extern int ahci_ignore_sss; + +extern struct device_attribute *ahci_shost_attrs[]; +extern struct device_attribute *ahci_sdev_attrs[]; + +/* + * This must be instantiated by the edge drivers. Read the comments + * for ATA_BASE_SHT + */ +#define AHCI_SHT(drv_name) \ + ATA_NCQ_SHT(drv_name), \ + .can_queue = AHCI_MAX_CMDS - 1, \ + .sg_tablesize = AHCI_MAX_SG, \ + .dma_boundary = AHCI_DMA_BOUNDARY, \ + .shost_attrs = ahci_shost_attrs, \ + .sdev_attrs = ahci_sdev_attrs + +extern struct ata_port_operations ahci_ops; +extern struct ata_port_operations ahci_platform_ops; +extern struct ata_port_operations ahci_pmp_retry_srst_ops; + +unsigned int ahci_dev_classify(struct ata_port *ap); +int ahci_setup_port_privdata(struct ata_port *ap); +void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, + u32 opts); +void ahci_save_initial_config(struct device *dev, + struct ahci_host_priv *hpriv); +void ahci_init_controller(struct ata_host *host); +int ahci_reset_controller(struct ata_host *host); + +int ahci_do_softreset(struct ata_link *link, unsigned int *class, + int pmp, unsigned long deadline, + int (*check_ready)(struct ata_link *link)); + +unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); +int ahci_stop_engine(struct ata_port *ap); +void ahci_start_fis_rx(struct ata_port *ap); +void ahci_start_engine(struct ata_port *ap); +int ahci_check_ready(struct ata_link *link); +int ahci_kick_engine(struct ata_port *ap); +int ahci_port_resume(struct ata_port *ap); +void ahci_set_em_messages(struct ahci_host_priv *hpriv, + struct ata_port_info *pi); +int ahci_reset_em(struct ata_host *host); +void ahci_print_info(struct ata_host *host, const char *scc_s); +int ahci_host_activate(struct ata_host *host, int irq, + struct scsi_host_template *sht); +void ahci_error_handler(struct ata_port *ap); + +static inline void __iomem *__ahci_port_base(struct ata_host *host, + unsigned int port_no) +{ + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->mmio; + + return mmio + 0x100 + (port_no * 0x80); +} + +static inline void __iomem *ahci_port_base(struct ata_port *ap) +{ + return __ahci_port_base(ap->host, ap->port_no); +} + +static inline int ahci_nr_ports(u32 cap) +{ + return (cap & 0x1f) + 1; +} + +#endif /* _AHCI_H */ diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c new file mode 100644 index 000000000..267a3d3e7 --- /dev/null +++ b/drivers/ata/ahci_da850.c @@ -0,0 +1,120 @@ +/* + * DaVinci DA850 AHCI SATA platform driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include "ahci.h" + +#define DRV_NAME "ahci_da850" + +/* SATA PHY Control Register offset from AHCI base */ +#define SATA_P0PHYCR_REG 0x178 + +#define SATA_PHY_MPY(x) ((x) << 0) +#define SATA_PHY_LOS(x) ((x) << 6) +#define SATA_PHY_RXCDR(x) ((x) << 10) +#define SATA_PHY_RXEQ(x) ((x) << 13) +#define SATA_PHY_TXSWING(x) ((x) << 19) +#define SATA_PHY_ENPLL(x) ((x) << 31) + +/* + * The multiplier needed for 1.5GHz PLL output. + * + * NOTE: This is currently hardcoded to be suitable for 100MHz crystal + * frequency (which is used by DA850 EVM board) and may need to be changed + * if you would like to use this driver on some other board. + */ +#define DA850_SATA_CLK_MULTIPLIER 7 + +static void da850_sata_init(struct device *dev, void __iomem *pwrdn_reg, + void __iomem *ahci_base) +{ + unsigned int val; + + /* Enable SATA clock receiver */ + val = readl(pwrdn_reg); + val &= ~BIT(0); + writel(val, pwrdn_reg); + + val = SATA_PHY_MPY(DA850_SATA_CLK_MULTIPLIER + 1) | SATA_PHY_LOS(1) | + SATA_PHY_RXCDR(4) | SATA_PHY_RXEQ(1) | SATA_PHY_TXSWING(3) | + SATA_PHY_ENPLL(1); + + writel(val, ahci_base + SATA_P0PHYCR_REG); +} + +static const struct ata_port_info ahci_da850_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_platform_ops, +}; + +static struct scsi_host_template ahci_platform_sht = { + AHCI_SHT(DRV_NAME), +}; + +static int ahci_da850_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + struct resource *res; + void __iomem *pwrdn_reg; + int rc; + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) + goto disable_resources; + + pwrdn_reg = devm_ioremap(dev, res->start, resource_size(res)); + if (!pwrdn_reg) + goto disable_resources; + + da850_sata_init(dev, pwrdn_reg, hpriv->mmio); + + rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info, + &ahci_platform_sht); + if (rc) + goto disable_resources; + + return 0; +disable_resources: + ahci_platform_disable_resources(hpriv); + return rc; +} + +static SIMPLE_DEV_PM_OPS(ahci_da850_pm_ops, ahci_platform_suspend, + ahci_platform_resume); + +static struct platform_driver ahci_da850_driver = { + .probe = ahci_da850_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = DRV_NAME, + .pm = &ahci_da850_pm_ops, + }, +}; +module_platform_driver(ahci_da850_driver); + +MODULE_DESCRIPTION("DaVinci DA850 AHCI SATA platform driver"); +MODULE_AUTHOR("Bartlomiej Zolnierkiewicz "); +MODULE_LICENSE("GPL"); diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c new file mode 100644 index 000000000..3f3a7db20 --- /dev/null +++ b/drivers/ata/ahci_imx.c @@ -0,0 +1,694 @@ +/* + * copyright (c) 2013 Freescale Semiconductor, Inc. + * Freescale IMX AHCI SATA platform driver + * + * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ahci.h" + +#define DRV_NAME "ahci-imx" + +enum { + /* Timer 1-ms Register */ + IMX_TIMER1MS = 0x00e0, + /* Port0 PHY Control Register */ + IMX_P0PHYCR = 0x0178, + IMX_P0PHYCR_TEST_PDDQ = 1 << 20, + IMX_P0PHYCR_CR_READ = 1 << 19, + IMX_P0PHYCR_CR_WRITE = 1 << 18, + IMX_P0PHYCR_CR_CAP_DATA = 1 << 17, + IMX_P0PHYCR_CR_CAP_ADDR = 1 << 16, + /* Port0 PHY Status Register */ + IMX_P0PHYSR = 0x017c, + IMX_P0PHYSR_CR_ACK = 1 << 18, + IMX_P0PHYSR_CR_DATA_OUT = 0xffff << 0, + /* Lane0 Output Status Register */ + IMX_LANE0_OUT_STAT = 0x2003, + IMX_LANE0_OUT_STAT_RX_PLL_STATE = 1 << 1, + /* Clock Reset Register */ + IMX_CLOCK_RESET = 0x7f3f, + IMX_CLOCK_RESET_RESET = 1 << 0, +}; + +enum ahci_imx_type { + AHCI_IMX53, + AHCI_IMX6Q, +}; + +struct imx_ahci_priv { + struct platform_device *ahci_pdev; + enum ahci_imx_type type; + struct clk *sata_clk; + struct clk *sata_ref_clk; + struct clk *ahb_clk; + struct regmap *gpr; + bool no_device; + bool first_time; + u32 phy_params; +}; + +static int ahci_imx_hotplug; +module_param_named(hotplug, ahci_imx_hotplug, int, 0644); +MODULE_PARM_DESC(hotplug, "AHCI IMX hot-plug support (0=Don't support, 1=support)"); + +static void ahci_imx_host_stop(struct ata_host *host); + +static int imx_phy_crbit_assert(void __iomem *mmio, u32 bit, bool assert) +{ + int timeout = 10; + u32 crval; + u32 srval; + + /* Assert or deassert the bit */ + crval = readl(mmio + IMX_P0PHYCR); + if (assert) + crval |= bit; + else + crval &= ~bit; + writel(crval, mmio + IMX_P0PHYCR); + + /* Wait for the cr_ack signal */ + do { + srval = readl(mmio + IMX_P0PHYSR); + if ((assert ? srval : ~srval) & IMX_P0PHYSR_CR_ACK) + break; + usleep_range(100, 200); + } while (--timeout); + + return timeout ? 0 : -ETIMEDOUT; +} + +static int imx_phy_reg_addressing(u16 addr, void __iomem *mmio) +{ + u32 crval = addr; + int ret; + + /* Supply the address on cr_data_in */ + writel(crval, mmio + IMX_P0PHYCR); + + /* Assert the cr_cap_addr signal */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_ADDR, true); + if (ret) + return ret; + + /* Deassert cr_cap_addr */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_ADDR, false); + if (ret) + return ret; + + return 0; +} + +static int imx_phy_reg_write(u16 val, void __iomem *mmio) +{ + u32 crval = val; + int ret; + + /* Supply the data on cr_data_in */ + writel(crval, mmio + IMX_P0PHYCR); + + /* Assert the cr_cap_data signal */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_DATA, true); + if (ret) + return ret; + + /* Deassert cr_cap_data */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_DATA, false); + if (ret) + return ret; + + if (val & IMX_CLOCK_RESET_RESET) { + /* + * In case we're resetting the phy, it's unable to acknowledge, + * so we return immediately here. + */ + crval |= IMX_P0PHYCR_CR_WRITE; + writel(crval, mmio + IMX_P0PHYCR); + goto out; + } + + /* Assert the cr_write signal */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_WRITE, true); + if (ret) + return ret; + + /* Deassert cr_write */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_WRITE, false); + if (ret) + return ret; + +out: + return 0; +} + +static int imx_phy_reg_read(u16 *val, void __iomem *mmio) +{ + int ret; + + /* Assert the cr_read signal */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_READ, true); + if (ret) + return ret; + + /* Capture the data from cr_data_out[] */ + *val = readl(mmio + IMX_P0PHYSR) & IMX_P0PHYSR_CR_DATA_OUT; + + /* Deassert cr_read */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_READ, false); + if (ret) + return ret; + + return 0; +} + +static int imx_sata_phy_reset(struct ahci_host_priv *hpriv) +{ + void __iomem *mmio = hpriv->mmio; + int timeout = 10; + u16 val; + int ret; + + /* Reset SATA PHY by setting RESET bit of PHY register CLOCK_RESET */ + ret = imx_phy_reg_addressing(IMX_CLOCK_RESET, mmio); + if (ret) + return ret; + ret = imx_phy_reg_write(IMX_CLOCK_RESET_RESET, mmio); + if (ret) + return ret; + + /* Wait for PHY RX_PLL to be stable */ + do { + usleep_range(100, 200); + ret = imx_phy_reg_addressing(IMX_LANE0_OUT_STAT, mmio); + if (ret) + return ret; + ret = imx_phy_reg_read(&val, mmio); + if (ret) + return ret; + if (val & IMX_LANE0_OUT_STAT_RX_PLL_STATE) + break; + } while (--timeout); + + return timeout ? 0 : -ETIMEDOUT; +} + +static int imx_sata_enable(struct ahci_host_priv *hpriv) +{ + struct imx_ahci_priv *imxpriv = hpriv->plat_data; + struct device *dev = &imxpriv->ahci_pdev->dev; + int ret; + + if (imxpriv->no_device) + return 0; + + ret = ahci_platform_enable_regulators(hpriv); + if (ret) + return ret; + + ret = clk_prepare_enable(imxpriv->sata_ref_clk); + if (ret < 0) + goto disable_regulator; + + if (imxpriv->type == AHCI_IMX6Q) { + /* + * set PHY Paremeters, two steps to configure the GPR13, + * one write for rest of parameters, mask of first write + * is 0x07ffffff, and the other one write for setting + * the mpll_clk_en. + */ + regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, + IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK | + IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK | + IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK | + IMX6Q_GPR13_SATA_SPD_MODE_MASK | + IMX6Q_GPR13_SATA_MPLL_SS_EN | + IMX6Q_GPR13_SATA_TX_ATTEN_MASK | + IMX6Q_GPR13_SATA_TX_BOOST_MASK | + IMX6Q_GPR13_SATA_TX_LVL_MASK | + IMX6Q_GPR13_SATA_MPLL_CLK_EN | + IMX6Q_GPR13_SATA_TX_EDGE_RATE, + imxpriv->phy_params); + regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, + IMX6Q_GPR13_SATA_MPLL_CLK_EN, + IMX6Q_GPR13_SATA_MPLL_CLK_EN); + + usleep_range(100, 200); + + ret = imx_sata_phy_reset(hpriv); + if (ret) { + dev_err(dev, "failed to reset phy: %d\n", ret); + goto disable_clk; + } + } + + usleep_range(1000, 2000); + + return 0; + +disable_clk: + clk_disable_unprepare(imxpriv->sata_ref_clk); +disable_regulator: + ahci_platform_disable_regulators(hpriv); + + return ret; +} + +static void imx_sata_disable(struct ahci_host_priv *hpriv) +{ + struct imx_ahci_priv *imxpriv = hpriv->plat_data; + + if (imxpriv->no_device) + return; + + if (imxpriv->type == AHCI_IMX6Q) { + regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, + IMX6Q_GPR13_SATA_MPLL_CLK_EN, + !IMX6Q_GPR13_SATA_MPLL_CLK_EN); + } + + clk_disable_unprepare(imxpriv->sata_ref_clk); + + ahci_platform_disable_regulators(hpriv); +} + +static void ahci_imx_error_handler(struct ata_port *ap) +{ + u32 reg_val; + struct ata_device *dev; + struct ata_host *host = dev_get_drvdata(ap->dev); + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->mmio; + struct imx_ahci_priv *imxpriv = hpriv->plat_data; + + ahci_error_handler(ap); + + if (!(imxpriv->first_time) || ahci_imx_hotplug) + return; + + imxpriv->first_time = false; + + ata_for_each_dev(dev, &ap->link, ENABLED) + return; + /* + * Disable link to save power. An imx ahci port can't be recovered + * without full reset once the pddq mode is enabled making it + * impossible to use as part of libata LPM. + */ + reg_val = readl(mmio + IMX_P0PHYCR); + writel(reg_val | IMX_P0PHYCR_TEST_PDDQ, mmio + IMX_P0PHYCR); + imx_sata_disable(hpriv); + imxpriv->no_device = true; + + dev_info(ap->dev, "no device found, disabling link.\n"); + dev_info(ap->dev, "pass " MODULE_PARAM_PREFIX ".hotplug=1 to enable hotplug\n"); +} + +static int ahci_imx_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct ata_host *host = dev_get_drvdata(ap->dev); + struct ahci_host_priv *hpriv = host->private_data; + struct imx_ahci_priv *imxpriv = hpriv->plat_data; + int ret = -EIO; + + if (imxpriv->type == AHCI_IMX53) + ret = ahci_pmp_retry_srst_ops.softreset(link, class, deadline); + else if (imxpriv->type == AHCI_IMX6Q) + ret = ahci_ops.softreset(link, class, deadline); + + return ret; +} + +static struct ata_port_operations ahci_imx_ops = { + .inherits = &ahci_ops, + .host_stop = ahci_imx_host_stop, + .error_handler = ahci_imx_error_handler, + .softreset = ahci_imx_softreset, +}; + +static const struct ata_port_info ahci_imx_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_imx_ops, +}; + +static const struct of_device_id imx_ahci_of_match[] = { + { .compatible = "fsl,imx53-ahci", .data = (void *)AHCI_IMX53 }, + { .compatible = "fsl,imx6q-ahci", .data = (void *)AHCI_IMX6Q }, + {}, +}; +MODULE_DEVICE_TABLE(of, imx_ahci_of_match); + +struct reg_value { + u32 of_value; + u32 reg_value; +}; + +struct reg_property { + const char *name; + const struct reg_value *values; + size_t num_values; + u32 def_value; + u32 set_value; +}; + +static const struct reg_value gpr13_tx_level[] = { + { 937, IMX6Q_GPR13_SATA_TX_LVL_0_937_V }, + { 947, IMX6Q_GPR13_SATA_TX_LVL_0_947_V }, + { 957, IMX6Q_GPR13_SATA_TX_LVL_0_957_V }, + { 966, IMX6Q_GPR13_SATA_TX_LVL_0_966_V }, + { 976, IMX6Q_GPR13_SATA_TX_LVL_0_976_V }, + { 986, IMX6Q_GPR13_SATA_TX_LVL_0_986_V }, + { 996, IMX6Q_GPR13_SATA_TX_LVL_0_996_V }, + { 1005, IMX6Q_GPR13_SATA_TX_LVL_1_005_V }, + { 1015, IMX6Q_GPR13_SATA_TX_LVL_1_015_V }, + { 1025, IMX6Q_GPR13_SATA_TX_LVL_1_025_V }, + { 1035, IMX6Q_GPR13_SATA_TX_LVL_1_035_V }, + { 1045, IMX6Q_GPR13_SATA_TX_LVL_1_045_V }, + { 1054, IMX6Q_GPR13_SATA_TX_LVL_1_054_V }, + { 1064, IMX6Q_GPR13_SATA_TX_LVL_1_064_V }, + { 1074, IMX6Q_GPR13_SATA_TX_LVL_1_074_V }, + { 1084, IMX6Q_GPR13_SATA_TX_LVL_1_084_V }, + { 1094, IMX6Q_GPR13_SATA_TX_LVL_1_094_V }, + { 1104, IMX6Q_GPR13_SATA_TX_LVL_1_104_V }, + { 1113, IMX6Q_GPR13_SATA_TX_LVL_1_113_V }, + { 1123, IMX6Q_GPR13_SATA_TX_LVL_1_123_V }, + { 1133, IMX6Q_GPR13_SATA_TX_LVL_1_133_V }, + { 1143, IMX6Q_GPR13_SATA_TX_LVL_1_143_V }, + { 1152, IMX6Q_GPR13_SATA_TX_LVL_1_152_V }, + { 1162, IMX6Q_GPR13_SATA_TX_LVL_1_162_V }, + { 1172, IMX6Q_GPR13_SATA_TX_LVL_1_172_V }, + { 1182, IMX6Q_GPR13_SATA_TX_LVL_1_182_V }, + { 1191, IMX6Q_GPR13_SATA_TX_LVL_1_191_V }, + { 1201, IMX6Q_GPR13_SATA_TX_LVL_1_201_V }, + { 1211, IMX6Q_GPR13_SATA_TX_LVL_1_211_V }, + { 1221, IMX6Q_GPR13_SATA_TX_LVL_1_221_V }, + { 1230, IMX6Q_GPR13_SATA_TX_LVL_1_230_V }, + { 1240, IMX6Q_GPR13_SATA_TX_LVL_1_240_V } +}; + +static const struct reg_value gpr13_tx_boost[] = { + { 0, IMX6Q_GPR13_SATA_TX_BOOST_0_00_DB }, + { 370, IMX6Q_GPR13_SATA_TX_BOOST_0_37_DB }, + { 740, IMX6Q_GPR13_SATA_TX_BOOST_0_74_DB }, + { 1110, IMX6Q_GPR13_SATA_TX_BOOST_1_11_DB }, + { 1480, IMX6Q_GPR13_SATA_TX_BOOST_1_48_DB }, + { 1850, IMX6Q_GPR13_SATA_TX_BOOST_1_85_DB }, + { 2220, IMX6Q_GPR13_SATA_TX_BOOST_2_22_DB }, + { 2590, IMX6Q_GPR13_SATA_TX_BOOST_2_59_DB }, + { 2960, IMX6Q_GPR13_SATA_TX_BOOST_2_96_DB }, + { 3330, IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB }, + { 3700, IMX6Q_GPR13_SATA_TX_BOOST_3_70_DB }, + { 4070, IMX6Q_GPR13_SATA_TX_BOOST_4_07_DB }, + { 4440, IMX6Q_GPR13_SATA_TX_BOOST_4_44_DB }, + { 4810, IMX6Q_GPR13_SATA_TX_BOOST_4_81_DB }, + { 5280, IMX6Q_GPR13_SATA_TX_BOOST_5_28_DB }, + { 5750, IMX6Q_GPR13_SATA_TX_BOOST_5_75_DB } +}; + +static const struct reg_value gpr13_tx_atten[] = { + { 8, IMX6Q_GPR13_SATA_TX_ATTEN_8_16 }, + { 9, IMX6Q_GPR13_SATA_TX_ATTEN_9_16 }, + { 10, IMX6Q_GPR13_SATA_TX_ATTEN_10_16 }, + { 12, IMX6Q_GPR13_SATA_TX_ATTEN_12_16 }, + { 14, IMX6Q_GPR13_SATA_TX_ATTEN_14_16 }, + { 16, IMX6Q_GPR13_SATA_TX_ATTEN_16_16 }, +}; + +static const struct reg_value gpr13_rx_eq[] = { + { 500, IMX6Q_GPR13_SATA_RX_EQ_VAL_0_5_DB }, + { 1000, IMX6Q_GPR13_SATA_RX_EQ_VAL_1_0_DB }, + { 1500, IMX6Q_GPR13_SATA_RX_EQ_VAL_1_5_DB }, + { 2000, IMX6Q_GPR13_SATA_RX_EQ_VAL_2_0_DB }, + { 2500, IMX6Q_GPR13_SATA_RX_EQ_VAL_2_5_DB }, + { 3000, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB }, + { 3500, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_5_DB }, + { 4000, IMX6Q_GPR13_SATA_RX_EQ_VAL_4_0_DB }, +}; + +static const struct reg_property gpr13_props[] = { + { + .name = "fsl,transmit-level-mV", + .values = gpr13_tx_level, + .num_values = ARRAY_SIZE(gpr13_tx_level), + .def_value = IMX6Q_GPR13_SATA_TX_LVL_1_025_V, + }, { + .name = "fsl,transmit-boost-mdB", + .values = gpr13_tx_boost, + .num_values = ARRAY_SIZE(gpr13_tx_boost), + .def_value = IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB, + }, { + .name = "fsl,transmit-atten-16ths", + .values = gpr13_tx_atten, + .num_values = ARRAY_SIZE(gpr13_tx_atten), + .def_value = IMX6Q_GPR13_SATA_TX_ATTEN_9_16, + }, { + .name = "fsl,receive-eq-mdB", + .values = gpr13_rx_eq, + .num_values = ARRAY_SIZE(gpr13_rx_eq), + .def_value = IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB, + }, { + .name = "fsl,no-spread-spectrum", + .def_value = IMX6Q_GPR13_SATA_MPLL_SS_EN, + .set_value = 0, + }, +}; + +static u32 imx_ahci_parse_props(struct device *dev, + const struct reg_property *prop, size_t num) +{ + struct device_node *np = dev->of_node; + u32 reg_value = 0; + int i, j; + + for (i = 0; i < num; i++, prop++) { + u32 of_val; + + if (prop->num_values == 0) { + if (of_property_read_bool(np, prop->name)) + reg_value |= prop->set_value; + else + reg_value |= prop->def_value; + continue; + } + + if (of_property_read_u32(np, prop->name, &of_val)) { + dev_info(dev, "%s not specified, using %08x\n", + prop->name, prop->def_value); + reg_value |= prop->def_value; + continue; + } + + for (j = 0; j < prop->num_values; j++) { + if (prop->values[j].of_value == of_val) { + dev_info(dev, "%s value %u, using %08x\n", + prop->name, of_val, prop->values[j].reg_value); + reg_value |= prop->values[j].reg_value; + break; + } + } + + if (j == prop->num_values) { + dev_err(dev, "DT property %s is not a valid value\n", + prop->name); + reg_value |= prop->def_value; + } + } + + return reg_value; +} + +static struct scsi_host_template ahci_platform_sht = { + AHCI_SHT(DRV_NAME), +}; + +static int imx_ahci_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *of_id; + struct ahci_host_priv *hpriv; + struct imx_ahci_priv *imxpriv; + unsigned int reg_val; + int ret; + + of_id = of_match_device(imx_ahci_of_match, dev); + if (!of_id) + return -EINVAL; + + imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL); + if (!imxpriv) + return -ENOMEM; + + imxpriv->ahci_pdev = pdev; + imxpriv->no_device = false; + imxpriv->first_time = true; + imxpriv->type = (enum ahci_imx_type)of_id->data; + + imxpriv->sata_clk = devm_clk_get(dev, "sata"); + if (IS_ERR(imxpriv->sata_clk)) { + dev_err(dev, "can't get sata clock.\n"); + return PTR_ERR(imxpriv->sata_clk); + } + + imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref"); + if (IS_ERR(imxpriv->sata_ref_clk)) { + dev_err(dev, "can't get sata_ref clock.\n"); + return PTR_ERR(imxpriv->sata_ref_clk); + } + + imxpriv->ahb_clk = devm_clk_get(dev, "ahb"); + if (IS_ERR(imxpriv->ahb_clk)) { + dev_err(dev, "can't get ahb clock.\n"); + return PTR_ERR(imxpriv->ahb_clk); + } + + if (imxpriv->type == AHCI_IMX6Q) { + u32 reg_value; + + imxpriv->gpr = syscon_regmap_lookup_by_compatible( + "fsl,imx6q-iomuxc-gpr"); + if (IS_ERR(imxpriv->gpr)) { + dev_err(dev, + "failed to find fsl,imx6q-iomux-gpr regmap\n"); + return PTR_ERR(imxpriv->gpr); + } + + reg_value = imx_ahci_parse_props(dev, gpr13_props, + ARRAY_SIZE(gpr13_props)); + + imxpriv->phy_params = + IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M | + IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F | + IMX6Q_GPR13_SATA_SPD_MODE_3P0G | + reg_value; + } + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + hpriv->plat_data = imxpriv; + + ret = clk_prepare_enable(imxpriv->sata_clk); + if (ret) + return ret; + + ret = imx_sata_enable(hpriv); + if (ret) + goto disable_clk; + + /* + * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL, + * and IP vendor specific register IMX_TIMER1MS. + * Configure CAP_SSS (support stagered spin up). + * Implement the port0. + * Get the ahb clock rate, and configure the TIMER1MS register. + */ + reg_val = readl(hpriv->mmio + HOST_CAP); + if (!(reg_val & HOST_CAP_SSS)) { + reg_val |= HOST_CAP_SSS; + writel(reg_val, hpriv->mmio + HOST_CAP); + } + reg_val = readl(hpriv->mmio + HOST_PORTS_IMPL); + if (!(reg_val & 0x1)) { + reg_val |= 0x1; + writel(reg_val, hpriv->mmio + HOST_PORTS_IMPL); + } + + reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000; + writel(reg_val, hpriv->mmio + IMX_TIMER1MS); + + ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info, + &ahci_platform_sht); + if (ret) + goto disable_sata; + + return 0; + +disable_sata: + imx_sata_disable(hpriv); +disable_clk: + clk_disable_unprepare(imxpriv->sata_clk); + return ret; +} + +static void ahci_imx_host_stop(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; + struct imx_ahci_priv *imxpriv = hpriv->plat_data; + + imx_sata_disable(hpriv); + clk_disable_unprepare(imxpriv->sata_clk); +} + +#ifdef CONFIG_PM_SLEEP +static int imx_ahci_suspend(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + int ret; + + ret = ahci_platform_suspend_host(dev); + if (ret) + return ret; + + imx_sata_disable(hpriv); + + return 0; +} + +static int imx_ahci_resume(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + int ret; + + ret = imx_sata_enable(hpriv); + if (ret) + return ret; + + return ahci_platform_resume_host(dev); +} +#endif + +static SIMPLE_DEV_PM_OPS(ahci_imx_pm_ops, imx_ahci_suspend, imx_ahci_resume); + +static struct platform_driver imx_ahci_driver = { + .probe = imx_ahci_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = DRV_NAME, + .of_match_table = imx_ahci_of_match, + .pm = &ahci_imx_pm_ops, + }, +}; +module_platform_driver(imx_ahci_driver); + +MODULE_DESCRIPTION("Freescale i.MX AHCI SATA platform driver"); +MODULE_AUTHOR("Richard Zhu "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("ahci:imx"); diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c new file mode 100644 index 000000000..5928d0746 --- /dev/null +++ b/drivers/ata/ahci_mvebu.c @@ -0,0 +1,133 @@ +/* + * AHCI glue platform driver for Marvell EBU SOCs + * + * Copyright (C) 2014 Marvell + * + * Thomas Petazzoni + * Marcin Wojtas + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include "ahci.h" + +#define DRV_NAME "ahci-mvebu" + +#define AHCI_VENDOR_SPECIFIC_0_ADDR 0xa0 +#define AHCI_VENDOR_SPECIFIC_0_DATA 0xa4 + +#define AHCI_WINDOW_CTRL(win) (0x60 + ((win) << 4)) +#define AHCI_WINDOW_BASE(win) (0x64 + ((win) << 4)) +#define AHCI_WINDOW_SIZE(win) (0x68 + ((win) << 4)) + +static void ahci_mvebu_mbus_config(struct ahci_host_priv *hpriv, + const struct mbus_dram_target_info *dram) +{ + int i; + + for (i = 0; i < 4; i++) { + writel(0, hpriv->mmio + AHCI_WINDOW_CTRL(i)); + writel(0, hpriv->mmio + AHCI_WINDOW_BASE(i)); + writel(0, hpriv->mmio + AHCI_WINDOW_SIZE(i)); + } + + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + + writel((cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + hpriv->mmio + AHCI_WINDOW_CTRL(i)); + writel(cs->base >> 16, hpriv->mmio + AHCI_WINDOW_BASE(i)); + writel(((cs->size - 1) & 0xffff0000), + hpriv->mmio + AHCI_WINDOW_SIZE(i)); + } +} + +static void ahci_mvebu_regret_option(struct ahci_host_priv *hpriv) +{ + /* + * Enable the regret bit to allow the SATA unit to regret a + * request that didn't receive an acknowlegde and avoid a + * deadlock + */ + writel(0x4, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_ADDR); + writel(0x80, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA); +} + +static const struct ata_port_info ahci_mvebu_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_platform_ops, +}; + +static struct scsi_host_template ahci_platform_sht = { + AHCI_SHT(DRV_NAME), +}; + +static int ahci_mvebu_probe(struct platform_device *pdev) +{ + struct ahci_host_priv *hpriv; + const struct mbus_dram_target_info *dram; + int rc; + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + dram = mv_mbus_dram_info(); + if (!dram) + return -ENODEV; + + ahci_mvebu_mbus_config(hpriv, dram); + ahci_mvebu_regret_option(hpriv); + + rc = ahci_platform_init_host(pdev, hpriv, &ahci_mvebu_port_info, + &ahci_platform_sht); + if (rc) + goto disable_resources; + + return 0; + +disable_resources: + ahci_platform_disable_resources(hpriv); + return rc; +} + +static const struct of_device_id ahci_mvebu_of_match[] = { + { .compatible = "marvell,armada-380-ahci", }, + { }, +}; +MODULE_DEVICE_TABLE(of, ahci_mvebu_of_match); + +/* + * We currently don't provide power management related operations, + * since there is no suspend/resume support at the platform level for + * Armada 38x for the moment. + */ +static struct platform_driver ahci_mvebu_driver = { + .probe = ahci_mvebu_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = DRV_NAME, + .of_match_table = ahci_mvebu_of_match, + }, +}; +module_platform_driver(ahci_mvebu_driver); + +MODULE_DESCRIPTION("Marvell EBU AHCI SATA driver"); +MODULE_AUTHOR("Thomas Petazzoni , Marcin Wojtas "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ahci_mvebu"); diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c new file mode 100644 index 000000000..78d6ae0b9 --- /dev/null +++ b/drivers/ata/ahci_platform.c @@ -0,0 +1,95 @@ +/* + * AHCI SATA platform driver + * + * Copyright 2004-2005 Red Hat, Inc. + * Jeff Garzik + * Copyright 2010 MontaVista Software, LLC. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "ahci.h" + +#define DRV_NAME "ahci" + +static const struct ata_port_info ahci_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_platform_ops, +}; + +static struct scsi_host_template ahci_platform_sht = { + AHCI_SHT(DRV_NAME), +}; + +static int ahci_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + int rc; + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci")) + hpriv->flags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ; + + rc = ahci_platform_init_host(pdev, hpriv, &ahci_port_info, + &ahci_platform_sht); + if (rc) + goto disable_resources; + + return 0; +disable_resources: + ahci_platform_disable_resources(hpriv); + return rc; +} + +static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend, + ahci_platform_resume); + +static const struct of_device_id ahci_of_match[] = { + { .compatible = "generic-ahci", }, + /* Keep the following compatibles for device tree compatibility */ + { .compatible = "snps,spear-ahci", }, + { .compatible = "snps,exynos5440-ahci", }, + { .compatible = "ibm,476gtr-ahci", }, + { .compatible = "snps,dwc-ahci", }, + { .compatible = "hisilicon,hisi-ahci", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ahci_of_match); + +static struct platform_driver ahci_driver = { + .probe = ahci_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = DRV_NAME, + .of_match_table = ahci_of_match, + .pm = &ahci_pm_ops, + }, +}; +module_platform_driver(ahci_driver); + +MODULE_DESCRIPTION("AHCI SATA platform driver"); +MODULE_AUTHOR("Anton Vorontsov "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ahci"); diff --git a/drivers/ata/ahci_st.c b/drivers/ata/ahci_st.c new file mode 100644 index 000000000..8ff428fe8 --- /dev/null +++ b/drivers/ata/ahci_st.c @@ -0,0 +1,252 @@ +/* + * Copyright (C) 2012 STMicroelectronics Limited + * + * Authors: Francesco Virlinzi + * Alexandre Torgue + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ahci.h" + +#define DRV_NAME "st_ahci" + +#define ST_AHCI_OOBR 0xbc +#define ST_AHCI_OOBR_WE BIT(31) +#define ST_AHCI_OOBR_CWMIN_SHIFT 24 +#define ST_AHCI_OOBR_CWMAX_SHIFT 16 +#define ST_AHCI_OOBR_CIMIN_SHIFT 8 +#define ST_AHCI_OOBR_CIMAX_SHIFT 0 + +struct st_ahci_drv_data { + struct platform_device *ahci; + struct reset_control *pwr; + struct reset_control *sw_rst; + struct reset_control *pwr_rst; +}; + +static void st_ahci_configure_oob(void __iomem *mmio) +{ + unsigned long old_val, new_val; + + new_val = (0x02 << ST_AHCI_OOBR_CWMIN_SHIFT) | + (0x04 << ST_AHCI_OOBR_CWMAX_SHIFT) | + (0x08 << ST_AHCI_OOBR_CIMIN_SHIFT) | + (0x0C << ST_AHCI_OOBR_CIMAX_SHIFT); + + old_val = readl(mmio + ST_AHCI_OOBR); + writel(old_val | ST_AHCI_OOBR_WE, mmio + ST_AHCI_OOBR); + writel(new_val | ST_AHCI_OOBR_WE, mmio + ST_AHCI_OOBR); + writel(new_val, mmio + ST_AHCI_OOBR); +} + +static int st_ahci_deassert_resets(struct ahci_host_priv *hpriv, + struct device *dev) +{ + struct st_ahci_drv_data *drv_data = hpriv->plat_data; + int err; + + if (drv_data->pwr) { + err = reset_control_deassert(drv_data->pwr); + if (err) { + dev_err(dev, "unable to bring out of pwrdwn\n"); + return err; + } + } + + if (drv_data->sw_rst) { + err = reset_control_deassert(drv_data->sw_rst); + if (err) { + dev_err(dev, "unable to bring out of sw-rst\n"); + return err; + } + } + + if (drv_data->pwr_rst) { + err = reset_control_deassert(drv_data->pwr_rst); + if (err) { + dev_err(dev, "unable to bring out of pwr-rst\n"); + return err; + } + } + + return 0; +} + +static void st_ahci_host_stop(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; + struct st_ahci_drv_data *drv_data = hpriv->plat_data; + struct device *dev = host->dev; + int err; + + if (drv_data->pwr) { + err = reset_control_assert(drv_data->pwr); + if (err) + dev_err(dev, "unable to pwrdwn\n"); + } + + ahci_platform_disable_resources(hpriv); +} + +static int st_ahci_probe_resets(struct ahci_host_priv *hpriv, + struct device *dev) +{ + struct st_ahci_drv_data *drv_data = hpriv->plat_data; + + drv_data->pwr = devm_reset_control_get(dev, "pwr-dwn"); + if (IS_ERR(drv_data->pwr)) { + dev_info(dev, "power reset control not defined\n"); + drv_data->pwr = NULL; + } + + drv_data->sw_rst = devm_reset_control_get(dev, "sw-rst"); + if (IS_ERR(drv_data->sw_rst)) { + dev_info(dev, "soft reset control not defined\n"); + drv_data->sw_rst = NULL; + } + + drv_data->pwr_rst = devm_reset_control_get(dev, "pwr-rst"); + if (IS_ERR(drv_data->pwr_rst)) { + dev_dbg(dev, "power soft reset control not defined\n"); + drv_data->pwr_rst = NULL; + } + + return st_ahci_deassert_resets(hpriv, dev); +} + +static struct ata_port_operations st_ahci_port_ops = { + .inherits = &ahci_platform_ops, + .host_stop = st_ahci_host_stop, +}; + +static const struct ata_port_info st_ahci_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &st_ahci_port_ops, +}; + +static struct scsi_host_template ahci_platform_sht = { + AHCI_SHT(DRV_NAME), +}; + +static int st_ahci_probe(struct platform_device *pdev) +{ + struct st_ahci_drv_data *drv_data; + struct ahci_host_priv *hpriv; + int err; + + drv_data = devm_kzalloc(&pdev->dev, sizeof(*drv_data), GFP_KERNEL); + if (!drv_data) + return -ENOMEM; + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + hpriv->plat_data = drv_data; + + err = st_ahci_probe_resets(hpriv, &pdev->dev); + if (err) + return err; + + err = ahci_platform_enable_resources(hpriv); + if (err) + return err; + + st_ahci_configure_oob(hpriv->mmio); + + err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info, + &ahci_platform_sht); + if (err) { + ahci_platform_disable_resources(hpriv); + return err; + } + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int st_ahci_suspend(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + struct st_ahci_drv_data *drv_data = hpriv->plat_data; + int err; + + err = ahci_platform_suspend_host(dev); + if (err) + return err; + + if (drv_data->pwr) { + err = reset_control_assert(drv_data->pwr); + if (err) { + dev_err(dev, "unable to pwrdwn"); + return err; + } + } + + ahci_platform_disable_resources(hpriv); + + return 0; +} + +static int st_ahci_resume(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + int err; + + err = ahci_platform_enable_resources(hpriv); + if (err) + return err; + + err = st_ahci_deassert_resets(hpriv, dev); + if (err) { + ahci_platform_disable_resources(hpriv); + return err; + } + + st_ahci_configure_oob(hpriv->mmio); + + return ahci_platform_resume_host(dev); +} +#endif + +static SIMPLE_DEV_PM_OPS(st_ahci_pm_ops, st_ahci_suspend, st_ahci_resume); + +static const struct of_device_id st_ahci_match[] = { + { .compatible = "st,ahci", }, + {}, +}; +MODULE_DEVICE_TABLE(of, st_ahci_match); + +static struct platform_driver st_ahci_driver = { + .driver = { + .name = DRV_NAME, + .pm = &st_ahci_pm_ops, + .of_match_table = of_match_ptr(st_ahci_match), + }, + .probe = st_ahci_probe, + .remove = ata_platform_remove_one, +}; +module_platform_driver(st_ahci_driver); + +MODULE_AUTHOR("Alexandre Torgue "); +MODULE_AUTHOR("Francesco Virlinzi "); +MODULE_DESCRIPTION("STMicroelectronics SATA AHCI Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c new file mode 100644 index 000000000..b26437430 --- /dev/null +++ b/drivers/ata/ahci_sunxi.c @@ -0,0 +1,270 @@ +/* + * Allwinner sunxi AHCI SATA platform driver + * Copyright 2013 Olliver Schinagl + * Copyright 2014 Hans de Goede + * + * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov + * Based on code from Allwinner Technology Co., Ltd. , + * Daniel Wang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "ahci.h" + +#define DRV_NAME "ahci-sunxi" + +/* Insmod parameters */ +static bool enable_pmp; +module_param(enable_pmp, bool, 0); +MODULE_PARM_DESC(enable_pmp, + "Enable support for sata port multipliers, only use if you use a pmp!"); + +#define AHCI_BISTAFR 0x00a0 +#define AHCI_BISTCR 0x00a4 +#define AHCI_BISTFCTR 0x00a8 +#define AHCI_BISTSR 0x00ac +#define AHCI_BISTDECR 0x00b0 +#define AHCI_DIAGNR0 0x00b4 +#define AHCI_DIAGNR1 0x00b8 +#define AHCI_OOBR 0x00bc +#define AHCI_PHYCS0R 0x00c0 +#define AHCI_PHYCS1R 0x00c4 +#define AHCI_PHYCS2R 0x00c8 +#define AHCI_TIMER1MS 0x00e0 +#define AHCI_GPARAM1R 0x00e8 +#define AHCI_GPARAM2R 0x00ec +#define AHCI_PPARAMR 0x00f0 +#define AHCI_TESTR 0x00f4 +#define AHCI_VERSIONR 0x00f8 +#define AHCI_IDR 0x00fc +#define AHCI_RWCR 0x00fc +#define AHCI_P0DMACR 0x0170 +#define AHCI_P0PHYCR 0x0178 +#define AHCI_P0PHYSR 0x017c + +static void sunxi_clrbits(void __iomem *reg, u32 clr_val) +{ + u32 reg_val; + + reg_val = readl(reg); + reg_val &= ~(clr_val); + writel(reg_val, reg); +} + +static void sunxi_setbits(void __iomem *reg, u32 set_val) +{ + u32 reg_val; + + reg_val = readl(reg); + reg_val |= set_val; + writel(reg_val, reg); +} + +static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val) +{ + u32 reg_val; + + reg_val = readl(reg); + reg_val &= ~(clr_val); + reg_val |= set_val; + writel(reg_val, reg); +} + +static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift) +{ + return (readl(reg) >> shift) & mask; +} + +static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base) +{ + u32 reg_val; + int timeout; + + /* This magic is from the original code */ + writel(0, reg_base + AHCI_RWCR); + msleep(5); + + sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19)); + sunxi_clrsetbits(reg_base + AHCI_PHYCS0R, + (0x7 << 24), + (0x5 << 24) | BIT(23) | BIT(18)); + sunxi_clrsetbits(reg_base + AHCI_PHYCS1R, + (0x3 << 16) | (0x1f << 8) | (0x3 << 6), + (0x2 << 16) | (0x6 << 8) | (0x2 << 6)); + sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15)); + sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19)); + sunxi_clrsetbits(reg_base + AHCI_PHYCS0R, + (0x7 << 20), (0x3 << 20)); + sunxi_clrsetbits(reg_base + AHCI_PHYCS2R, + (0x1f << 5), (0x19 << 5)); + msleep(5); + + sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19)); + + timeout = 250; /* Power up takes aprox 50 us */ + do { + reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28); + if (reg_val == 0x02) + break; + + if (--timeout == 0) { + dev_err(dev, "PHY power up failed.\n"); + return -EIO; + } + udelay(1); + } while (1); + + sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24)); + + timeout = 100; /* Calibration takes aprox 10 us */ + do { + reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24); + if (reg_val == 0x00) + break; + + if (--timeout == 0) { + dev_err(dev, "PHY calibration failed.\n"); + return -EIO; + } + udelay(1); + } while (1); + + msleep(15); + + writel(0x7, reg_base + AHCI_RWCR); + + return 0; +} + +static void ahci_sunxi_start_engine(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + struct ahci_host_priv *hpriv = ap->host->private_data; + + /* Setup DMA before DMA start */ + sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ff00, 0x00004400); + + /* Start DMA */ + sunxi_setbits(port_mmio + PORT_CMD, PORT_CMD_START); +} + +static const struct ata_port_info ahci_sunxi_port_info = { + .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_platform_ops, +}; + +static struct scsi_host_template ahci_platform_sht = { + AHCI_SHT(DRV_NAME), +}; + +static int ahci_sunxi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + int rc; + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + hpriv->start_engine = ahci_sunxi_start_engine; + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + rc = ahci_sunxi_phy_init(dev, hpriv->mmio); + if (rc) + goto disable_resources; + + hpriv->flags = AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | + AHCI_HFLAG_YES_NCQ; + + /* + * The sunxi sata controller seems to be unable to successfully do a + * soft reset if no pmp is attached, so disable pmp use unless + * requested, otherwise directly attached disks do not work. + */ + if (!enable_pmp) + hpriv->flags |= AHCI_HFLAG_NO_PMP; + + rc = ahci_platform_init_host(pdev, hpriv, &ahci_sunxi_port_info, + &ahci_platform_sht); + if (rc) + goto disable_resources; + + return 0; + +disable_resources: + ahci_platform_disable_resources(hpriv); + return rc; +} + +#ifdef CONFIG_PM_SLEEP +static int ahci_sunxi_resume(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + int rc; + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + rc = ahci_sunxi_phy_init(dev, hpriv->mmio); + if (rc) + goto disable_resources; + + rc = ahci_platform_resume_host(dev); + if (rc) + goto disable_resources; + + return 0; + +disable_resources: + ahci_platform_disable_resources(hpriv); + return rc; +} +#endif + +static SIMPLE_DEV_PM_OPS(ahci_sunxi_pm_ops, ahci_platform_suspend, + ahci_sunxi_resume); + +static const struct of_device_id ahci_sunxi_of_match[] = { + { .compatible = "allwinner,sun4i-a10-ahci", }, + { }, +}; +MODULE_DEVICE_TABLE(of, ahci_sunxi_of_match); + +static struct platform_driver ahci_sunxi_driver = { + .probe = ahci_sunxi_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = DRV_NAME, + .of_match_table = ahci_sunxi_of_match, + .pm = &ahci_sunxi_pm_ops, + }, +}; +module_platform_driver(ahci_sunxi_driver); + +MODULE_DESCRIPTION("Allwinner sunxi AHCI SATA driver"); +MODULE_AUTHOR("Olliver Schinagl "); +MODULE_LICENSE("GPL"); diff --git a/drivers/ata/ahci_tegra.c b/drivers/ata/ahci_tegra.c new file mode 100644 index 000000000..3a62eb246 --- /dev/null +++ b/drivers/ata/ahci_tegra.c @@ -0,0 +1,389 @@ +/* + * drivers/ata/ahci_tegra.c + * + * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved. + * + * Author: + * Mikko Perttunen + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "ahci.h" + +#define DRV_NAME "tegra-ahci" + +#define SATA_CONFIGURATION_0 0x180 +#define SATA_CONFIGURATION_EN_FPCI BIT(0) + +#define SCFG_OFFSET 0x1000 + +#define T_SATA0_CFG_1 0x04 +#define T_SATA0_CFG_1_IO_SPACE BIT(0) +#define T_SATA0_CFG_1_MEMORY_SPACE BIT(1) +#define T_SATA0_CFG_1_BUS_MASTER BIT(2) +#define T_SATA0_CFG_1_SERR BIT(8) + +#define T_SATA0_CFG_9 0x24 +#define T_SATA0_CFG_9_BASE_ADDRESS_SHIFT 13 + +#define SATA_FPCI_BAR5 0x94 +#define SATA_FPCI_BAR5_START_SHIFT 4 + +#define SATA_INTR_MASK 0x188 +#define SATA_INTR_MASK_IP_INT_MASK BIT(16) + +#define T_SATA0_AHCI_HBA_CAP_BKDR 0x300 + +#define T_SATA0_BKDOOR_CC 0x4a4 + +#define T_SATA0_CFG_SATA 0x54c +#define T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN BIT(12) + +#define T_SATA0_CFG_MISC 0x550 + +#define T_SATA0_INDEX 0x680 + +#define T_SATA0_CHX_PHY_CTRL1_GEN1 0x690 +#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK 0xff +#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT 0 +#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK (0xff << 8) +#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT 8 + +#define T_SATA0_CHX_PHY_CTRL1_GEN2 0x694 +#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK 0xff +#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_SHIFT 0 +#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK (0xff << 12) +#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_SHIFT 12 + +#define T_SATA0_CHX_PHY_CTRL2 0x69c +#define T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1 0x23 + +#define T_SATA0_CHX_PHY_CTRL11 0x6d0 +#define T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ (0x2800 << 16) + +#define FUSE_SATA_CALIB 0x124 +#define FUSE_SATA_CALIB_MASK 0x3 + +struct sata_pad_calibration { + u8 gen1_tx_amp; + u8 gen1_tx_peak; + u8 gen2_tx_amp; + u8 gen2_tx_peak; +}; + +static const struct sata_pad_calibration tegra124_pad_calibration[] = { + {0x18, 0x04, 0x18, 0x0a}, + {0x0e, 0x04, 0x14, 0x0a}, + {0x0e, 0x07, 0x1a, 0x0e}, + {0x14, 0x0e, 0x1a, 0x0e}, +}; + +struct tegra_ahci_priv { + struct platform_device *pdev; + void __iomem *sata_regs; + struct reset_control *sata_rst; + struct reset_control *sata_oob_rst; + struct reset_control *sata_cold_rst; + /* Needs special handling, cannot use ahci_platform */ + struct clk *sata_clk; + struct regulator_bulk_data supplies[5]; +}; + +static int tegra_ahci_power_on(struct ahci_host_priv *hpriv) +{ + struct tegra_ahci_priv *tegra = hpriv->plat_data; + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(tegra->supplies), + tegra->supplies); + if (ret) + return ret; + + ret = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_SATA, + tegra->sata_clk, + tegra->sata_rst); + if (ret) + goto disable_regulators; + + reset_control_assert(tegra->sata_oob_rst); + reset_control_assert(tegra->sata_cold_rst); + + ret = ahci_platform_enable_resources(hpriv); + if (ret) + goto disable_power; + + reset_control_deassert(tegra->sata_cold_rst); + reset_control_deassert(tegra->sata_oob_rst); + + return 0; + +disable_power: + clk_disable_unprepare(tegra->sata_clk); + + tegra_powergate_power_off(TEGRA_POWERGATE_SATA); + +disable_regulators: + regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies); + + return ret; +} + +static void tegra_ahci_power_off(struct ahci_host_priv *hpriv) +{ + struct tegra_ahci_priv *tegra = hpriv->plat_data; + + ahci_platform_disable_resources(hpriv); + + reset_control_assert(tegra->sata_rst); + reset_control_assert(tegra->sata_oob_rst); + reset_control_assert(tegra->sata_cold_rst); + + clk_disable_unprepare(tegra->sata_clk); + tegra_powergate_power_off(TEGRA_POWERGATE_SATA); + + regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies); +} + +static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv) +{ + struct tegra_ahci_priv *tegra = hpriv->plat_data; + int ret; + unsigned int val; + struct sata_pad_calibration calib; + + ret = tegra_ahci_power_on(hpriv); + if (ret) { + dev_err(&tegra->pdev->dev, + "failed to power on AHCI controller: %d\n", ret); + return ret; + } + + val = readl(tegra->sata_regs + SATA_CONFIGURATION_0); + val |= SATA_CONFIGURATION_EN_FPCI; + writel(val, tegra->sata_regs + SATA_CONFIGURATION_0); + + /* Pad calibration */ + + ret = tegra_fuse_readl(FUSE_SATA_CALIB, &val); + if (ret) { + dev_err(&tegra->pdev->dev, + "failed to read calibration fuse: %d\n", ret); + return ret; + } + + calib = tegra124_pad_calibration[val & FUSE_SATA_CALIB_MASK]; + + writel(BIT(0), tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX); + + val = readl(tegra->sata_regs + + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN1); + val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK; + val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK; + val |= calib.gen1_tx_amp << + T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT; + val |= calib.gen1_tx_peak << + T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT; + writel(val, tegra->sata_regs + SCFG_OFFSET + + T_SATA0_CHX_PHY_CTRL1_GEN1); + + val = readl(tegra->sata_regs + + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN2); + val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK; + val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK; + val |= calib.gen2_tx_amp << + T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT; + val |= calib.gen2_tx_peak << + T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT; + writel(val, tegra->sata_regs + SCFG_OFFSET + + T_SATA0_CHX_PHY_CTRL1_GEN2); + + writel(T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ, + tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL11); + writel(T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1, + tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL2); + + writel(0, tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX); + + /* Program controller device ID */ + + val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA); + val |= T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN; + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA); + + writel(0x01060100, tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC); + + val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA); + val &= ~T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN; + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA); + + /* Enable IO & memory access, bus master mode */ + + val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1); + val |= T_SATA0_CFG_1_IO_SPACE | T_SATA0_CFG_1_MEMORY_SPACE | + T_SATA0_CFG_1_BUS_MASTER | T_SATA0_CFG_1_SERR; + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1); + + /* Program SATA MMIO */ + + writel(0x10000 << SATA_FPCI_BAR5_START_SHIFT, + tegra->sata_regs + SATA_FPCI_BAR5); + + writel(0x08000 << T_SATA0_CFG_9_BASE_ADDRESS_SHIFT, + tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_9); + + /* Unmask SATA interrupts */ + + val = readl(tegra->sata_regs + SATA_INTR_MASK); + val |= SATA_INTR_MASK_IP_INT_MASK; + writel(val, tegra->sata_regs + SATA_INTR_MASK); + + return 0; +} + +static void tegra_ahci_controller_deinit(struct ahci_host_priv *hpriv) +{ + tegra_ahci_power_off(hpriv); +} + +static void tegra_ahci_host_stop(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; + + tegra_ahci_controller_deinit(hpriv); +} + +static struct ata_port_operations ahci_tegra_port_ops = { + .inherits = &ahci_ops, + .host_stop = tegra_ahci_host_stop, +}; + +static const struct ata_port_info ahci_tegra_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_tegra_port_ops, +}; + +static const struct of_device_id tegra_ahci_of_match[] = { + { .compatible = "nvidia,tegra124-ahci" }, + {} +}; +MODULE_DEVICE_TABLE(of, tegra_ahci_of_match); + +static struct scsi_host_template ahci_platform_sht = { + AHCI_SHT(DRV_NAME), +}; + +static int tegra_ahci_probe(struct platform_device *pdev) +{ + struct ahci_host_priv *hpriv; + struct tegra_ahci_priv *tegra; + struct resource *res; + int ret; + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL); + if (!tegra) + return -ENOMEM; + + hpriv->plat_data = tegra; + + tegra->pdev = pdev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + tegra->sata_regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(tegra->sata_regs)) + return PTR_ERR(tegra->sata_regs); + + tegra->sata_rst = devm_reset_control_get(&pdev->dev, "sata"); + if (IS_ERR(tegra->sata_rst)) { + dev_err(&pdev->dev, "Failed to get sata reset\n"); + return PTR_ERR(tegra->sata_rst); + } + + tegra->sata_oob_rst = devm_reset_control_get(&pdev->dev, "sata-oob"); + if (IS_ERR(tegra->sata_oob_rst)) { + dev_err(&pdev->dev, "Failed to get sata-oob reset\n"); + return PTR_ERR(tegra->sata_oob_rst); + } + + tegra->sata_cold_rst = devm_reset_control_get(&pdev->dev, "sata-cold"); + if (IS_ERR(tegra->sata_cold_rst)) { + dev_err(&pdev->dev, "Failed to get sata-cold reset\n"); + return PTR_ERR(tegra->sata_cold_rst); + } + + tegra->sata_clk = devm_clk_get(&pdev->dev, "sata"); + if (IS_ERR(tegra->sata_clk)) { + dev_err(&pdev->dev, "Failed to get sata clock\n"); + return PTR_ERR(tegra->sata_clk); + } + + tegra->supplies[0].supply = "avdd"; + tegra->supplies[1].supply = "hvdd"; + tegra->supplies[2].supply = "vddio"; + tegra->supplies[3].supply = "target-5v"; + tegra->supplies[4].supply = "target-12v"; + + ret = devm_regulator_bulk_get(&pdev->dev, ARRAY_SIZE(tegra->supplies), + tegra->supplies); + if (ret) { + dev_err(&pdev->dev, "Failed to get regulators\n"); + return ret; + } + + ret = tegra_ahci_controller_init(hpriv); + if (ret) + return ret; + + ret = ahci_platform_init_host(pdev, hpriv, &ahci_tegra_port_info, + &ahci_platform_sht); + if (ret) + goto deinit_controller; + + return 0; + +deinit_controller: + tegra_ahci_controller_deinit(hpriv); + + return ret; +}; + +static struct platform_driver tegra_ahci_driver = { + .probe = tegra_ahci_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = DRV_NAME, + .of_match_table = tegra_ahci_of_match, + }, + /* LP0 suspend support not implemented */ +}; +module_platform_driver(tegra_ahci_driver); + +MODULE_AUTHOR("Mikko Perttunen "); +MODULE_DESCRIPTION("Tegra124 AHCI SATA driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c new file mode 100644 index 000000000..2b78510d9 --- /dev/null +++ b/drivers/ata/ahci_xgene.c @@ -0,0 +1,751 @@ +/* + * AppliedMicro X-Gene SoC SATA Host Controller Driver + * + * Copyright (c) 2014, Applied Micro Circuits Corporation + * Author: Loc Ho + * Tuan Phan + * Suman Tripathi + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + * NOTE: PM support is not currently available. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include "ahci.h" + +#define DRV_NAME "xgene-ahci" + +/* Max # of disk per a controller */ +#define MAX_AHCI_CHN_PERCTR 2 + +/* MUX CSR */ +#define SATA_ENET_CONFIG_REG 0x00000000 +#define CFG_SATA_ENET_SELECT_MASK 0x00000001 + +/* SATA core host controller CSR */ +#define SLVRDERRATTRIBUTES 0x00000000 +#define SLVWRERRATTRIBUTES 0x00000004 +#define MSTRDERRATTRIBUTES 0x00000008 +#define MSTWRERRATTRIBUTES 0x0000000c +#define BUSCTLREG 0x00000014 +#define IOFMSTRWAUX 0x00000018 +#define INTSTATUSMASK 0x0000002c +#define ERRINTSTATUS 0x00000030 +#define ERRINTSTATUSMASK 0x00000034 + +/* SATA host AHCI CSR */ +#define PORTCFG 0x000000a4 +#define PORTADDR_SET(dst, src) \ + (((dst) & ~0x0000003f) | (((u32)(src)) & 0x0000003f)) +#define PORTPHY1CFG 0x000000a8 +#define PORTPHY1CFG_FRCPHYRDY_SET(dst, src) \ + (((dst) & ~0x00100000) | (((u32)(src) << 0x14) & 0x00100000)) +#define PORTPHY2CFG 0x000000ac +#define PORTPHY3CFG 0x000000b0 +#define PORTPHY4CFG 0x000000b4 +#define PORTPHY5CFG 0x000000b8 +#define SCTL0 0x0000012C +#define PORTPHY5CFG_RTCHG_SET(dst, src) \ + (((dst) & ~0xfff00000) | (((u32)(src) << 0x14) & 0xfff00000)) +#define PORTAXICFG_EN_CONTEXT_SET(dst, src) \ + (((dst) & ~0x01000000) | (((u32)(src) << 0x18) & 0x01000000)) +#define PORTAXICFG 0x000000bc +#define PORTAXICFG_OUTTRANS_SET(dst, src) \ + (((dst) & ~0x00f00000) | (((u32)(src) << 0x14) & 0x00f00000)) +#define PORTRANSCFG 0x000000c8 +#define PORTRANSCFG_RXWM_SET(dst, src) \ + (((dst) & ~0x0000007f) | (((u32)(src)) & 0x0000007f)) + +/* SATA host controller AXI CSR */ +#define INT_SLV_TMOMASK 0x00000010 + +/* SATA diagnostic CSR */ +#define CFG_MEM_RAM_SHUTDOWN 0x00000070 +#define BLOCK_MEM_RDY 0x00000074 + +/* Max retry for link down */ +#define MAX_LINK_DOWN_RETRY 3 + +struct xgene_ahci_context { + struct ahci_host_priv *hpriv; + struct device *dev; + u8 last_cmd[MAX_AHCI_CHN_PERCTR]; /* tracking the last command issued*/ + u32 class[MAX_AHCI_CHN_PERCTR]; /* tracking the class of device */ + void __iomem *csr_core; /* Core CSR address of IP */ + void __iomem *csr_diag; /* Diag CSR address of IP */ + void __iomem *csr_axi; /* AXI CSR address of IP */ + void __iomem *csr_mux; /* MUX CSR address of IP */ +}; + +static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx) +{ + dev_dbg(ctx->dev, "Release memory from shutdown\n"); + writel(0x0, ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN); + readl(ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN); /* Force a barrier */ + msleep(1); /* reset may take up to 1ms */ + if (readl(ctx->csr_diag + BLOCK_MEM_RDY) != 0xFFFFFFFF) { + dev_err(ctx->dev, "failed to release memory from shutdown\n"); + return -ENODEV; + } + return 0; +} + +/** + * xgene_ahci_poll_reg_val- Poll a register on a specific value. + * @ap : ATA port of interest. + * @reg : Register of interest. + * @val : Value to be attained. + * @interval : waiting interval for polling. + * @timeout : timeout for achieving the value. + */ +static int xgene_ahci_poll_reg_val(struct ata_port *ap, + void __iomem *reg, unsigned + int val, unsigned long interval, + unsigned long timeout) +{ + unsigned long deadline; + unsigned int tmp; + + tmp = ioread32(reg); + deadline = ata_deadline(jiffies, timeout); + + while (tmp != val && time_before(jiffies, deadline)) { + ata_msleep(ap, interval); + tmp = ioread32(reg); + } + + return tmp; +} + +/** + * xgene_ahci_restart_engine - Restart the dma engine. + * @ap : ATA port of interest + * + * Waits for completion of multiple commands and restarts + * the DMA engine inside the controller. + */ +static int xgene_ahci_restart_engine(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 fbs; + + /* + * In case of PMP multiple IDENTIFY DEVICE commands can be + * issued inside PxCI. So need to poll PxCI for the + * completion of outstanding IDENTIFY DEVICE commands before + * we restart the DMA engine. + */ + if (xgene_ahci_poll_reg_val(ap, port_mmio + + PORT_CMD_ISSUE, 0x0, 1, 100)) + return -EBUSY; + + ahci_stop_engine(ap); + ahci_start_fis_rx(ap); + + /* + * Enable the PxFBS.FBS_EN bit as it + * gets cleared due to stopping the engine. + */ + if (pp->fbs_supported) { + fbs = readl(port_mmio + PORT_FBS); + writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS); + fbs = readl(port_mmio + PORT_FBS); + } + + hpriv->start_engine(ap); + + return 0; +} + +/** + * xgene_ahci_qc_issue - Issue commands to the device + * @qc: Command to issue + * + * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot + * clear the BSY bit after receiving the PIO setup FIS. This results in the dma + * state machine goes into the CMFatalErrorUpdate state and locks up. By + * restarting the dma engine, it removes the controller out of lock up state. + * + * Due to H/W errata, the controller is unable to save the PMP + * field fetched from command header before sending the H2D FIS. + * When the device returns the PMP port field in the D2H FIS, there is + * a mismatch and results in command completion failure. The + * workaround is to write the pmp value to PxFBS.DEV field before issuing + * any command to PMP. + */ +static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; + struct xgene_ahci_context *ctx = hpriv->plat_data; + int rc = 0; + u32 port_fbs; + void *port_mmio = ahci_port_base(ap); + + /* + * Write the pmp value to PxFBS.DEV + * for case of Port Mulitplier. + */ + if (ctx->class[ap->port_no] == ATA_DEV_PMP) { + port_fbs = readl(port_mmio + PORT_FBS); + port_fbs &= ~PORT_FBS_DEV_MASK; + port_fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET; + writel(port_fbs, port_mmio + PORT_FBS); + } + + if (unlikely((ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA) || + (ctx->last_cmd[ap->port_no] == ATA_CMD_PACKET) || + (ctx->last_cmd[ap->port_no] == ATA_CMD_SMART))) + xgene_ahci_restart_engine(ap); + + rc = ahci_qc_issue(qc); + + /* Save the last command issued */ + ctx->last_cmd[ap->port_no] = qc->tf.command; + + return rc; +} + +static bool xgene_ahci_is_memram_inited(struct xgene_ahci_context *ctx) +{ + void __iomem *diagcsr = ctx->csr_diag; + + return (readl(diagcsr + CFG_MEM_RAM_SHUTDOWN) == 0 && + readl(diagcsr + BLOCK_MEM_RDY) == 0xFFFFFFFF); +} + +/** + * xgene_ahci_read_id - Read ID data from the specified device + * @dev: device + * @tf: proposed taskfile + * @id: data buffer + * + * This custom read ID function is required due to the fact that the HW + * does not support DEVSLP. + */ +static unsigned int xgene_ahci_read_id(struct ata_device *dev, + struct ata_taskfile *tf, u16 *id) +{ + u32 err_mask; + + err_mask = ata_do_dev_read_id(dev, tf, id); + if (err_mask) + return err_mask; + + /* + * Mask reserved area. Word78 spec of Link Power Management + * bit15-8: reserved + * bit7: NCQ autosence + * bit6: Software settings preservation supported + * bit5: reserved + * bit4: In-order sata delivery supported + * bit3: DIPM requests supported + * bit2: DMA Setup FIS Auto-Activate optimization supported + * bit1: DMA Setup FIX non-Zero buffer offsets supported + * bit0: Reserved + * + * Clear reserved bit 8 (DEVSLP bit) as we don't support DEVSLP + */ + id[ATA_ID_FEATURE_SUPP] &= cpu_to_le16(~(1 << 8)); + + return 0; +} + +static void xgene_ahci_set_phy_cfg(struct xgene_ahci_context *ctx, int channel) +{ + void __iomem *mmio = ctx->hpriv->mmio; + u32 val; + + dev_dbg(ctx->dev, "port configure mmio 0x%p channel %d\n", + mmio, channel); + val = readl(mmio + PORTCFG); + val = PORTADDR_SET(val, channel == 0 ? 2 : 3); + writel(val, mmio + PORTCFG); + readl(mmio + PORTCFG); /* Force a barrier */ + /* Disable fix rate */ + writel(0x0001fffe, mmio + PORTPHY1CFG); + readl(mmio + PORTPHY1CFG); /* Force a barrier */ + writel(0x28183219, mmio + PORTPHY2CFG); + readl(mmio + PORTPHY2CFG); /* Force a barrier */ + writel(0x13081008, mmio + PORTPHY3CFG); + readl(mmio + PORTPHY3CFG); /* Force a barrier */ + writel(0x00480815, mmio + PORTPHY4CFG); + readl(mmio + PORTPHY4CFG); /* Force a barrier */ + /* Set window negotiation */ + val = readl(mmio + PORTPHY5CFG); + val = PORTPHY5CFG_RTCHG_SET(val, 0x300); + writel(val, mmio + PORTPHY5CFG); + readl(mmio + PORTPHY5CFG); /* Force a barrier */ + val = readl(mmio + PORTAXICFG); + val = PORTAXICFG_EN_CONTEXT_SET(val, 0x1); /* Enable context mgmt */ + val = PORTAXICFG_OUTTRANS_SET(val, 0xe); /* Set outstanding */ + writel(val, mmio + PORTAXICFG); + readl(mmio + PORTAXICFG); /* Force a barrier */ + /* Set the watermark threshold of the receive FIFO */ + val = readl(mmio + PORTRANSCFG); + val = PORTRANSCFG_RXWM_SET(val, 0x30); + writel(val, mmio + PORTRANSCFG); +} + +/** + * xgene_ahci_do_hardreset - Issue the actual COMRESET + * @link: link to reset + * @deadline: deadline jiffies for the operation + * @online: Return value to indicate if device online + * + * Due to the limitation of the hardware PHY, a difference set of setting is + * required for each supported disk speed - Gen3 (6.0Gbps), Gen2 (3.0Gbps), + * and Gen1 (1.5Gbps). Otherwise during long IO stress test, the PHY will + * report disparity error and etc. In addition, during COMRESET, there can + * be error reported in the register PORT_SCR_ERR. For SERR_DISPARITY and + * SERR_10B_8B_ERR, the PHY receiver line must be reseted. Also during long + * reboot cycle regression, sometimes the PHY reports link down even if the + * device is present because of speed negotiation failure. so need to retry + * the COMRESET to get the link up. The following algorithm is followed to + * proper configure the hardware PHY during COMRESET: + * + * Alg Part 1: + * 1. Start the PHY at Gen3 speed (default setting) + * 2. Issue the COMRESET + * 3. If no link, go to Alg Part 3 + * 4. If link up, determine if the negotiated speed matches the PHY + * configured speed + * 5. If they matched, go to Alg Part 2 + * 6. If they do not matched and first time, configure the PHY for the linked + * up disk speed and repeat step 2 + * 7. Go to Alg Part 2 + * + * Alg Part 2: + * 1. On link up, if there are any SERR_DISPARITY and SERR_10B_8B_ERR error + * reported in the register PORT_SCR_ERR, then reset the PHY receiver line + * 2. Go to Alg Part 4 + * + * Alg Part 3: + * 1. Check the PORT_SCR_STAT to see whether device presence detected but PHY + * communication establishment failed and maximum link down attempts are + * less than Max attempts 3 then goto Alg Part 1. + * 2. Go to Alg Part 4. + * + * Alg Part 4: + * 1. Clear any pending from register PORT_SCR_ERR. + * + * NOTE: For the initial version, we will NOT support Gen1/Gen2. In addition + * and until the underlying PHY supports an method to reset the receiver + * line, on detection of SERR_DISPARITY or SERR_10B_8B_ERR errors, + * an warning message will be printed. + */ +static int xgene_ahci_do_hardreset(struct ata_link *link, + unsigned long deadline, bool *online) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + struct ata_port *ap = link->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; + struct xgene_ahci_context *ctx = hpriv->plat_data; + struct ahci_port_priv *pp = ap->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + void __iomem *port_mmio = ahci_port_base(ap); + struct ata_taskfile tf; + int link_down_retry = 0; + int rc; + u32 val, sstatus; + + do { + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.command = ATA_BUSY; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); + rc = sata_link_hardreset(link, timing, deadline, online, + ahci_check_ready); + if (*online) { + val = readl(port_mmio + PORT_SCR_ERR); + if (val & (SERR_DISPARITY | SERR_10B_8B_ERR)) + dev_warn(ctx->dev, "link has error\n"); + break; + } + + sata_scr_read(link, SCR_STATUS, &sstatus); + } while (link_down_retry++ < MAX_LINK_DOWN_RETRY && + (sstatus & 0xff) == 0x1); + + /* clear all errors if any pending */ + val = readl(port_mmio + PORT_SCR_ERR); + writel(val, port_mmio + PORT_SCR_ERR); + + return rc; +} + +static int xgene_ahci_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + bool online; + int rc; + u32 portcmd_saved; + u32 portclb_saved; + u32 portclbhi_saved; + u32 portrxfis_saved; + u32 portrxfishi_saved; + + /* As hardreset resets these CSR, save it to restore later */ + portcmd_saved = readl(port_mmio + PORT_CMD); + portclb_saved = readl(port_mmio + PORT_LST_ADDR); + portclbhi_saved = readl(port_mmio + PORT_LST_ADDR_HI); + portrxfis_saved = readl(port_mmio + PORT_FIS_ADDR); + portrxfishi_saved = readl(port_mmio + PORT_FIS_ADDR_HI); + + ahci_stop_engine(ap); + + rc = xgene_ahci_do_hardreset(link, deadline, &online); + + /* As controller hardreset clears them, restore them */ + writel(portcmd_saved, port_mmio + PORT_CMD); + writel(portclb_saved, port_mmio + PORT_LST_ADDR); + writel(portclbhi_saved, port_mmio + PORT_LST_ADDR_HI); + writel(portrxfis_saved, port_mmio + PORT_FIS_ADDR); + writel(portrxfishi_saved, port_mmio + PORT_FIS_ADDR_HI); + + hpriv->start_engine(ap); + + if (online) + *class = ahci_dev_classify(ap); + + return rc; +} + +static void xgene_ahci_host_stop(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; + + ahci_platform_disable_resources(hpriv); +} + +/** + * xgene_ahci_pmp_softreset - Issue the softreset to the drives connected + * to Port Multiplier. + * @link: link to reset + * @class: Return value to indicate class of device + * @deadline: deadline jiffies for the operation + * + * Due to H/W errata, the controller is unable to save the PMP + * field fetched from command header before sending the H2D FIS. + * When the device returns the PMP port field in the D2H FIS, there is + * a mismatch and results in command completion failure. The workaround + * is to write the pmp value to PxFBS.DEV field before issuing any command + * to PMP. + */ +static int xgene_ahci_pmp_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int pmp = sata_srst_pmp(link); + struct ata_port *ap = link->ap; + u32 rc; + void *port_mmio = ahci_port_base(ap); + u32 port_fbs; + + /* + * Set PxFBS.DEV field with pmp + * value. + */ + port_fbs = readl(port_mmio + PORT_FBS); + port_fbs &= ~PORT_FBS_DEV_MASK; + port_fbs |= pmp << PORT_FBS_DEV_OFFSET; + writel(port_fbs, port_mmio + PORT_FBS); + + rc = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); + + return rc; +} + +/** + * xgene_ahci_softreset - Issue the softreset to the drive. + * @link: link to reset + * @class: Return value to indicate class of device + * @deadline: deadline jiffies for the operation + * + * Due to H/W errata, the controller is unable to save the PMP + * field fetched from command header before sending the H2D FIS. + * When the device returns the PMP port field in the D2H FIS, there is + * a mismatch and results in command completion failure. The workaround + * is to write the pmp value to PxFBS.DEV field before issuing any command + * to PMP. Here is the algorithm to detect PMP : + * + * 1. Save the PxFBS value + * 2. Program PxFBS.DEV with pmp value send by framework. Framework sends + * 0xF for both PMP/NON-PMP initially + * 3. Issue softreset + * 4. If signature class is PMP goto 6 + * 5. restore the original PxFBS and goto 3 + * 6. return + */ +static int xgene_ahci_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int pmp = sata_srst_pmp(link); + struct ata_port *ap = link->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; + struct xgene_ahci_context *ctx = hpriv->plat_data; + void *port_mmio = ahci_port_base(ap); + u32 port_fbs; + u32 port_fbs_save; + u32 retry = 1; + u32 rc; + + port_fbs_save = readl(port_mmio + PORT_FBS); + + /* + * Set PxFBS.DEV field with pmp + * value. + */ + port_fbs = readl(port_mmio + PORT_FBS); + port_fbs &= ~PORT_FBS_DEV_MASK; + port_fbs |= pmp << PORT_FBS_DEV_OFFSET; + writel(port_fbs, port_mmio + PORT_FBS); + +softreset_retry: + rc = ahci_do_softreset(link, class, pmp, + deadline, ahci_check_ready); + + ctx->class[ap->port_no] = *class; + if (*class != ATA_DEV_PMP) { + /* + * Retry for normal drives without + * setting PxFBS.DEV field with pmp value. + */ + if (retry--) { + writel(port_fbs_save, port_mmio + PORT_FBS); + goto softreset_retry; + } + } + + return rc; +} + +static struct ata_port_operations xgene_ahci_ops = { + .inherits = &ahci_ops, + .host_stop = xgene_ahci_host_stop, + .hardreset = xgene_ahci_hardreset, + .read_id = xgene_ahci_read_id, + .qc_issue = xgene_ahci_qc_issue, + .softreset = xgene_ahci_softreset, + .pmp_softreset = xgene_ahci_pmp_softreset +}; + +static const struct ata_port_info xgene_ahci_port_info = { + .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &xgene_ahci_ops, +}; + +static int xgene_ahci_hw_init(struct ahci_host_priv *hpriv) +{ + struct xgene_ahci_context *ctx = hpriv->plat_data; + int i; + int rc; + u32 val; + + /* Remove IP RAM out of shutdown */ + rc = xgene_ahci_init_memram(ctx); + if (rc) + return rc; + + for (i = 0; i < MAX_AHCI_CHN_PERCTR; i++) + xgene_ahci_set_phy_cfg(ctx, i); + + /* AXI disable Mask */ + writel(0xffffffff, hpriv->mmio + HOST_IRQ_STAT); + readl(hpriv->mmio + HOST_IRQ_STAT); /* Force a barrier */ + writel(0, ctx->csr_core + INTSTATUSMASK); + val = readl(ctx->csr_core + INTSTATUSMASK); /* Force a barrier */ + dev_dbg(ctx->dev, "top level interrupt mask 0x%X value 0x%08X\n", + INTSTATUSMASK, val); + + writel(0x0, ctx->csr_core + ERRINTSTATUSMASK); + readl(ctx->csr_core + ERRINTSTATUSMASK); /* Force a barrier */ + writel(0x0, ctx->csr_axi + INT_SLV_TMOMASK); + readl(ctx->csr_axi + INT_SLV_TMOMASK); + + /* Enable AXI Interrupt */ + writel(0xffffffff, ctx->csr_core + SLVRDERRATTRIBUTES); + writel(0xffffffff, ctx->csr_core + SLVWRERRATTRIBUTES); + writel(0xffffffff, ctx->csr_core + MSTRDERRATTRIBUTES); + writel(0xffffffff, ctx->csr_core + MSTWRERRATTRIBUTES); + + /* Enable coherency */ + val = readl(ctx->csr_core + BUSCTLREG); + val &= ~0x00000002; /* Enable write coherency */ + val &= ~0x00000001; /* Enable read coherency */ + writel(val, ctx->csr_core + BUSCTLREG); + + val = readl(ctx->csr_core + IOFMSTRWAUX); + val |= (1 << 3); /* Enable read coherency */ + val |= (1 << 9); /* Enable write coherency */ + writel(val, ctx->csr_core + IOFMSTRWAUX); + val = readl(ctx->csr_core + IOFMSTRWAUX); + dev_dbg(ctx->dev, "coherency 0x%X value 0x%08X\n", + IOFMSTRWAUX, val); + + return rc; +} + +static int xgene_ahci_mux_select(struct xgene_ahci_context *ctx) +{ + u32 val; + + /* Check for optional MUX resource */ + if (!ctx->csr_mux) + return 0; + + val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG); + val &= ~CFG_SATA_ENET_SELECT_MASK; + writel(val, ctx->csr_mux + SATA_ENET_CONFIG_REG); + val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG); + return val & CFG_SATA_ENET_SELECT_MASK ? -1 : 0; +} + +static struct scsi_host_template ahci_platform_sht = { + AHCI_SHT(DRV_NAME), +}; + +static int xgene_ahci_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + struct xgene_ahci_context *ctx; + struct resource *res; + int rc; + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + hpriv->plat_data = ctx; + ctx->hpriv = hpriv; + ctx->dev = dev; + + /* Retrieve the IP core resource */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + ctx->csr_core = devm_ioremap_resource(dev, res); + if (IS_ERR(ctx->csr_core)) + return PTR_ERR(ctx->csr_core); + + /* Retrieve the IP diagnostic resource */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + ctx->csr_diag = devm_ioremap_resource(dev, res); + if (IS_ERR(ctx->csr_diag)) + return PTR_ERR(ctx->csr_diag); + + /* Retrieve the IP AXI resource */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 3); + ctx->csr_axi = devm_ioremap_resource(dev, res); + if (IS_ERR(ctx->csr_axi)) + return PTR_ERR(ctx->csr_axi); + + /* Retrieve the optional IP mux resource */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 4); + if (res) { + void __iomem *csr = devm_ioremap_resource(dev, res); + if (IS_ERR(csr)) + return PTR_ERR(csr); + + ctx->csr_mux = csr; + } + + dev_dbg(dev, "VAddr 0x%p Mmio VAddr 0x%p\n", ctx->csr_core, + hpriv->mmio); + + /* Select ATA */ + if ((rc = xgene_ahci_mux_select(ctx))) { + dev_err(dev, "SATA mux selection failed error %d\n", rc); + return -ENODEV; + } + + if (xgene_ahci_is_memram_inited(ctx)) { + dev_info(dev, "skip clock and PHY initialization\n"); + goto skip_clk_phy; + } + + /* Due to errata, HW requires full toggle transition */ + rc = ahci_platform_enable_clks(hpriv); + if (rc) + goto disable_resources; + ahci_platform_disable_clks(hpriv); + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + goto disable_resources; + + /* Configure the host controller */ + xgene_ahci_hw_init(hpriv); +skip_clk_phy: + hpriv->flags = AHCI_HFLAG_NO_PMP | AHCI_HFLAG_NO_NCQ; + + rc = ahci_platform_init_host(pdev, hpriv, &xgene_ahci_port_info, + &ahci_platform_sht); + if (rc) + goto disable_resources; + + dev_dbg(dev, "X-Gene SATA host controller initialized\n"); + return 0; + +disable_resources: + ahci_platform_disable_resources(hpriv); + return rc; +} + +#ifdef CONFIG_ACPI +static const struct acpi_device_id xgene_ahci_acpi_match[] = { + { "APMC0D0D", }, + { } +}; +MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match); +#endif + +static const struct of_device_id xgene_ahci_of_match[] = { + {.compatible = "apm,xgene-ahci"}, + {}, +}; +MODULE_DEVICE_TABLE(of, xgene_ahci_of_match); + +static struct platform_driver xgene_ahci_driver = { + .probe = xgene_ahci_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = DRV_NAME, + .of_match_table = xgene_ahci_of_match, + .acpi_match_table = ACPI_PTR(xgene_ahci_acpi_match), + }, +}; + +module_platform_driver(xgene_ahci_driver); + +MODULE_DESCRIPTION("APM X-Gene AHCI SATA driver"); +MODULE_AUTHOR("Loc Ho "); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.4"); diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c new file mode 100644 index 000000000..9ff545ce8 --- /dev/null +++ b/drivers/ata/ata_generic.c @@ -0,0 +1,258 @@ +/* + * ata_generic.c - Generic PATA/SATA controller driver. + * Copyright 2005 Red Hat Inc, all rights reserved. + * + * Elements from ide/pci/generic.c + * Copyright (C) 2001-2002 Andre Hedrick + * Portions (C) Copyright 2002 Red Hat Inc + * + * May be copied or modified under the terms of the GNU General Public License + * + * Driver for PCI IDE interfaces implementing the standard bus mastering + * interface functionality. This assumes the BIOS did the drive set up and + * tuning for us. By default we do not grab all IDE class devices as they + * may have other drivers or need fixups to avoid problems. Instead we keep + * a default list of stuff without documentation/driver that appears to + * work. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "ata_generic" +#define DRV_VERSION "0.2.15" + +/* + * A generic parallel ATA driver using libata + */ + +enum { + ATA_GEN_CLASS_MATCH = (1 << 0), + ATA_GEN_FORCE_DMA = (1 << 1), + ATA_GEN_INTEL_IDER = (1 << 2), +}; + +/** + * generic_set_mode - mode setting + * @link: link to set up + * @unused: returned device on error + * + * Use a non standard set_mode function. We don't want to be tuned. + * The BIOS configured everything. Our job is not to fiddle. We + * read the dma enabled bits from the PCI configuration of the device + * and respect them. + */ + +static int generic_set_mode(struct ata_link *link, struct ata_device **unused) +{ + struct ata_port *ap = link->ap; + const struct pci_device_id *id = ap->host->private_data; + int dma_enabled = 0; + struct ata_device *dev; + + if (id->driver_data & ATA_GEN_FORCE_DMA) { + dma_enabled = 0xff; + } else if (ap->ioaddr.bmdma_addr) { + /* Bits 5 and 6 indicate if DMA is active on master/slave */ + dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + } + + ata_for_each_dev(dev, link, ENABLED) { + /* We don't really care */ + dev->pio_mode = XFER_PIO_0; + dev->dma_mode = XFER_MW_DMA_0; + /* We do need the right mode information for DMA or PIO + and this comes from the current configuration flags */ + if (dma_enabled & (1 << (5 + dev->devno))) { + unsigned int xfer_mask = ata_id_xfermask(dev->id); + const char *name; + + if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA)) + name = ata_mode_string(xfer_mask); + else { + /* SWDMA perhaps? */ + name = "DMA"; + xfer_mask |= ata_xfer_mode2mask(XFER_MW_DMA_0); + } + + ata_dev_info(dev, "configured for %s\n", name); + + dev->xfer_mode = ata_xfer_mask2mode(xfer_mask); + dev->xfer_shift = ata_xfer_mode2shift(dev->xfer_mode); + dev->flags &= ~ATA_DFLAG_PIO; + } else { + ata_dev_info(dev, "configured for PIO\n"); + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + } + } + return 0; +} + +static struct scsi_host_template generic_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations generic_port_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = ata_cable_unknown, + .set_mode = generic_set_mode, +}; + +static int all_generic_ide; /* Set to claim all devices */ + +/** + * is_intel_ider - identify intel IDE-R devices + * @dev: PCI device + * + * Distinguish Intel IDE-R controller devices from other Intel IDE + * devices. IDE-R devices have no timing registers and are in + * most respects virtual. They should be driven by the ata_generic + * driver. + * + * IDE-R devices have PCI offset 0xF8.L as zero, later Intel ATA has + * it non zero. All Intel ATA has 0x40 writable (timing), but it is + * not writable on IDE-R devices (this is guaranteed). + */ + +static int is_intel_ider(struct pci_dev *dev) +{ + /* For Intel IDE the value at 0xF8 is only zero on IDE-R + interfaces */ + u32 r; + u16 t; + + /* Check the manufacturing ID, it will be zero for IDE-R */ + pci_read_config_dword(dev, 0xF8, &r); + /* Not IDE-R: punt so that ata_(old)piix gets it */ + if (r != 0) + return 0; + /* 0xF8 will also be zero on some early Intel IDE devices + but they will have a sane timing register */ + pci_read_config_word(dev, 0x40, &t); + if (t != 0) + return 0; + /* Finally check if the timing register is writable so that + we eliminate any early devices hot-docked in a docking + station */ + pci_write_config_word(dev, 0x40, 1); + pci_read_config_word(dev, 0x40, &t); + if (t) { + pci_write_config_word(dev, 0x40, 0); + return 0; + } + return 1; +} + +/** + * ata_generic_init - attach generic IDE + * @dev: PCI device found + * @id: match entry + * + * Called each time a matching IDE interface is found. We check if the + * interface is one we wish to claim and if so we perform any chip + * specific hacks then let the ATA layer do the heavy lifting. + */ + +static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + u16 command; + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &generic_port_ops + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + + /* Don't use the generic entry unless instructed to do so */ + if ((id->driver_data & ATA_GEN_CLASS_MATCH) && all_generic_ide == 0) + return -ENODEV; + + if ((id->driver_data & ATA_GEN_INTEL_IDER) && !all_generic_ide) + if (!is_intel_ider(dev)) + return -ENODEV; + + /* Devices that need care */ + if (dev->vendor == PCI_VENDOR_ID_UMC && + dev->device == PCI_DEVICE_ID_UMC_UM8886A && + (!(PCI_FUNC(dev->devfn) & 1))) + return -ENODEV; + + if (dev->vendor == PCI_VENDOR_ID_OPTI && + dev->device == PCI_DEVICE_ID_OPTI_82C558 && + (!(PCI_FUNC(dev->devfn) & 1))) + return -ENODEV; + + /* Don't re-enable devices in generic mode or we will break some + motherboards with disabled and unused IDE controllers */ + pci_read_config_word(dev, PCI_COMMAND, &command); + if (!(command & PCI_COMMAND_IO)) + return -ENODEV; + + if (dev->vendor == PCI_VENDOR_ID_AL) + ata_pci_bmdma_clear_simplex(dev); + + if (dev->vendor == PCI_VENDOR_ID_ATI) { + int rc = pcim_enable_device(dev); + if (rc < 0) + return rc; + pcim_pin_device(dev); + } + return ata_pci_bmdma_init_one(dev, ppi, &generic_sht, (void *)id, 0); +} + +static struct pci_device_id ata_generic[] = { + { PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE), }, + { PCI_DEVICE(PCI_VENDOR_ID_HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), }, + { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8673F), }, + { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886A), }, + { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF), }, + { PCI_DEVICE(PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), }, + { PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), }, + { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), + .driver_data = ATA_GEN_FORCE_DMA }, +#if !defined(CONFIG_PATA_TOSHIBA) && !defined(CONFIG_PATA_TOSHIBA_MODULE) + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_3), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), }, +#endif + /* Intel, IDE class device */ + { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, + .driver_data = ATA_GEN_INTEL_IDER }, + /* Must come last. If you add entries adjust this table appropriately */ + { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL), + .driver_data = ATA_GEN_CLASS_MATCH }, + { 0, }, +}; + +static struct pci_driver ata_generic_pci_driver = { + .name = DRV_NAME, + .id_table = ata_generic, + .probe = ata_generic_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(ata_generic_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for generic ATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ata_generic); +MODULE_VERSION(DRV_VERSION); + +module_param(all_generic_ide, int, 0); diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c new file mode 100644 index 000000000..ffbe625e6 --- /dev/null +++ b/drivers/ata/ata_piix.c @@ -0,0 +1,1805 @@ +/* + * ata_piix.c - Intel PATA/SATA controllers + * + * Maintained by: Tejun Heo + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * + * Copyright 2003-2005 Red Hat Inc + * Copyright 2003-2005 Jeff Garzik + * + * + * Copyright header from piix.c: + * + * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer + * Copyright (C) 1998-2000 Andre Hedrick + * Copyright (C) 2003 Red Hat Inc + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available at http://developer.intel.com/ + * + * Documentation + * Publicly available from Intel web site. Errata documentation + * is also publicly available. As an aide to anyone hacking on this + * driver the list of errata that are relevant is below, going back to + * PIIX4. Older device documentation is now a bit tricky to find. + * + * The chipsets all follow very much the same design. The original Triton + * series chipsets do _not_ support independent device timings, but this + * is fixed in Triton II. With the odd mobile exception the chips then + * change little except in gaining more modes until SATA arrives. This + * driver supports only the chips with independent timing (that is those + * with SITRE and the 0x44 timing register). See pata_oldpiix and pata_mpiix + * for the early chip drivers. + * + * Errata of note: + * + * Unfixable + * PIIX4 errata #9 - Only on ultra obscure hw + * ICH3 errata #13 - Not observed to affect real hw + * by Intel + * + * Things we must deal with + * PIIX4 errata #10 - BM IDE hang with non UDMA + * (must stop/start dma to recover) + * 440MX errata #15 - As PIIX4 errata #10 + * PIIX4 errata #15 - Must not read control registers + * during a PIO transfer + * 440MX errata #13 - As PIIX4 errata #15 + * ICH2 errata #21 - DMA mode 0 doesn't work right + * ICH0/1 errata #55 - As ICH2 errata #21 + * ICH2 spec c #9 - Extra operations needed to handle + * drive hotswap [NOT YET SUPPORTED] + * ICH2 spec c #20 - IDE PRD must not cross a 64K boundary + * and must be dword aligned + * ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3 + * ICH7 errata #16 - MWDMA1 timings are incorrect + * + * Should have been BIOS fixed: + * 450NX: errata #19 - DMA hangs on old 450NX + * 450NX: errata #20 - DMA hangs on old 450NX + * 450NX: errata #25 - Corruption with DMA on old 450NX + * ICH3 errata #15 - IDE deadlock under high load + * (BIOS must set dev 31 fn 0 bit 23) + * ICH3 errata #18 - Don't use native mode + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "ata_piix" +#define DRV_VERSION "2.13" + +enum { + PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ + ICH5_PMR = 0x90, /* address map register */ + ICH5_PCS = 0x92, /* port control and status */ + PIIX_SIDPR_BAR = 5, + PIIX_SIDPR_LEN = 16, + PIIX_SIDPR_IDX = 0, + PIIX_SIDPR_DATA = 4, + + PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */ + PIIX_FLAG_SIDPR = (1 << 29), /* SATA idx/data pair regs */ + + PIIX_PATA_FLAGS = ATA_FLAG_SLAVE_POSS, + PIIX_SATA_FLAGS = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR, + + PIIX_FLAG_PIO16 = (1 << 30), /*support 16bit PIO only*/ + + PIIX_80C_PRI = (1 << 5) | (1 << 4), + PIIX_80C_SEC = (1 << 7) | (1 << 6), + + /* constants for mapping table */ + P0 = 0, /* port 0 */ + P1 = 1, /* port 1 */ + P2 = 2, /* port 2 */ + P3 = 3, /* port 3 */ + IDE = -1, /* IDE */ + NA = -2, /* not available */ + RV = -3, /* reserved */ + + PIIX_AHCI_DEVICE = 6, + + /* host->flags bits */ + PIIX_HOST_BROKEN_SUSPEND = (1 << 24), +}; + +enum piix_controller_ids { + /* controller IDs */ + piix_pata_mwdma, /* PIIX3 MWDMA only */ + piix_pata_33, /* PIIX4 at 33Mhz */ + ich_pata_33, /* ICH up to UDMA 33 only */ + ich_pata_66, /* ICH up to 66 Mhz */ + ich_pata_100, /* ICH up to UDMA 100 */ + ich_pata_100_nomwdma1, /* ICH up to UDMA 100 but with no MWDMA1*/ + ich5_sata, + ich6_sata, + ich6m_sata, + ich8_sata, + ich8_2port_sata, + ich8m_apple_sata, /* locks up on second port enable */ + tolapai_sata, + piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */ + ich8_sata_snb, + ich8_2port_sata_snb, + ich8_2port_sata_byt, +}; + +struct piix_map_db { + const u32 mask; + const u16 port_enable; + const int map[][4]; +}; + +struct piix_host_priv { + const int *map; + u32 saved_iocfg; + void __iomem *sidpr; +}; + +static unsigned int in_module_init = 1; + +static const struct pci_device_id piix_pci_tbl[] = { + /* Intel PIIX3 for the 430HX etc */ + { 0x8086, 0x7010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_mwdma }, + /* VMware ICH4 */ + { 0x8086, 0x7111, 0x15ad, 0x1976, 0, 0, piix_pata_vmw }, + /* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */ + /* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */ + { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 }, + /* Intel PIIX4 */ + { 0x8086, 0x7199, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 }, + /* Intel PIIX4 */ + { 0x8086, 0x7601, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 }, + /* Intel PIIX */ + { 0x8086, 0x84CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 }, + /* Intel ICH (i810, i815, i840) UDMA 66*/ + { 0x8086, 0x2411, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_66 }, + /* Intel ICH0 : UDMA 33*/ + { 0x8086, 0x2421, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_33 }, + /* Intel ICH2M */ + { 0x8086, 0x244A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH2 (i810E2, i845, 850, 860) UDMA 100 */ + { 0x8086, 0x244B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH3M */ + { 0x8086, 0x248A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH3 (E7500/1) UDMA 100 */ + { 0x8086, 0x248B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH4-L */ + { 0x8086, 0x24C1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH4 (i845GV, i845E, i852, i855) UDMA 100 */ + { 0x8086, 0x24CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + { 0x8086, 0x24CB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH5 */ + { 0x8086, 0x24DB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* C-ICH (i810E2) */ + { 0x8086, 0x245B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* ESB (855GME/875P + 6300ESB) UDMA 100 */ + { 0x8086, 0x25A2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* ICH6 (and 6) (i915) UDMA 100 */ + { 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* ICH7/7-R (i945, i975) UDMA 100*/ + { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 }, + { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 }, + /* ICH8 Mobile PATA Controller */ + { 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + + /* SATA ports */ + + /* 82801EB (ICH5) */ + { 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, + /* 82801EB (ICH5) */ + { 0x8086, 0x24df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, + /* 6300ESB (ICH5 variant with broken PCS present bits) */ + { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, + /* 6300ESB pretending RAID */ + { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, + /* 82801FB/FW (ICH6/ICH6W) */ + { 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata }, + /* 82801FR/FRW (ICH6R/ICH6RW) */ + { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata }, + /* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented). + * Attach iff the controller is in IDE mode. */ + { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE << 8, 0xffff00, ich6m_sata }, + /* 82801GB/GR/GH (ICH7, identical to ICH6) */ + { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata }, + /* 82801GBM/GHM (ICH7M, identical to ICH6M) */ + { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata }, + /* Enterprise Southbridge 2 (631xESB/632xESB) */ + { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata }, + /* SATA Controller 1 IDE (ICH8) */ + { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller 2 IDE (ICH8) */ + { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* Mobile SATA Controller IDE (ICH8M), Apple */ + { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata }, + { 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata }, + { 0x8086, 0x2828, 0x106b, 0x00a3, 0, 0, ich8m_apple_sata }, + /* Mobile SATA Controller IDE (ICH8M) */ + { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller IDE (ICH9) */ + { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller IDE (ICH9) */ + { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (ICH9) */ + { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (ICH9M) */ + { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (ICH9M) */ + { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (ICH9M) */ + { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller IDE (Tolapai) */ + { 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata }, + /* SATA Controller IDE (ICH10) */ + { 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller IDE (ICH10) */ + { 0x8086, 0x3a06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (ICH10) */ + { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller IDE (ICH10) */ + { 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (PCH) */ + { 0x8086, 0x3b20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller IDE (PCH) */ + { 0x8086, 0x3b21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (PCH) */ + { 0x8086, 0x3b26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (PCH) */ + { 0x8086, 0x3b28, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller IDE (PCH) */ + { 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (PCH) */ + { 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller IDE (CPT) */ + { 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (CPT) */ + { 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (CPT) */ + { 0x8086, 0x1c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (CPT) */ + { 0x8086, 0x1c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (PBG) */ + { 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (PBG) */ + { 0x8086, 0x1d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Panther Point) */ + { 0x8086, 0x1e00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Panther Point) */ + { 0x8086, 0x1e01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Panther Point) */ + { 0x8086, 0x1e08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Panther Point) */ + { 0x8086, 0x1e09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Lynx Point) */ + { 0x8086, 0x8c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Lynx Point) */ + { 0x8086, 0x8c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Lynx Point) */ + { 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb }, + /* SATA Controller IDE (Lynx Point) */ + { 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (DH89xxCC) */ + { 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Avoton) */ + { 0x8086, 0x1f20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Avoton) */ + { 0x8086, 0x1f21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Avoton) */ + { 0x8086, 0x1f30, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Avoton) */ + { 0x8086, 0x1f31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Wellsburg) */ + { 0x8086, 0x8d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Wellsburg) */ + { 0x8086, 0x8d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb }, + /* SATA Controller IDE (Wellsburg) */ + { 0x8086, 0x8d60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Wellsburg) */ + { 0x8086, 0x8d68, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (BayTrail) */ + { 0x8086, 0x0F20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt }, + { 0x8086, 0x0F21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt }, + /* SATA Controller IDE (Coleto Creek) */ + { 0x8086, 0x23a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (9 Series) */ + { 0x8086, 0x8c88, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb }, + /* SATA Controller IDE (9 Series) */ + { 0x8086, 0x8c89, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb }, + /* SATA Controller IDE (9 Series) */ + { 0x8086, 0x8c80, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (9 Series) */ + { 0x8086, 0x8c81, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + + { } /* terminate list */ +}; + +static const struct piix_map_db ich5_map_db = { + .mask = 0x7, + .port_enable = 0x3, + .map = { + /* PM PS SM SS MAP */ + { P0, NA, P1, NA }, /* 000b */ + { P1, NA, P0, NA }, /* 001b */ + { RV, RV, RV, RV }, + { RV, RV, RV, RV }, + { P0, P1, IDE, IDE }, /* 100b */ + { P1, P0, IDE, IDE }, /* 101b */ + { IDE, IDE, P0, P1 }, /* 110b */ + { IDE, IDE, P1, P0 }, /* 111b */ + }, +}; + +static const struct piix_map_db ich6_map_db = { + .mask = 0x3, + .port_enable = 0xf, + .map = { + /* PM PS SM SS MAP */ + { P0, P2, P1, P3 }, /* 00b */ + { IDE, IDE, P1, P3 }, /* 01b */ + { P0, P2, IDE, IDE }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + +static const struct piix_map_db ich6m_map_db = { + .mask = 0x3, + .port_enable = 0x5, + + /* Map 01b isn't specified in the doc but some notebooks use + * it anyway. MAP 01b have been spotted on both ICH6M and + * ICH7M. + */ + .map = { + /* PM PS SM SS MAP */ + { P0, P2, NA, NA }, /* 00b */ + { IDE, IDE, P1, P3 }, /* 01b */ + { P0, P2, IDE, IDE }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + +static const struct piix_map_db ich8_map_db = { + .mask = 0x3, + .port_enable = 0xf, + .map = { + /* PM PS SM SS MAP */ + { P0, P2, P1, P3 }, /* 00b (hardwired when in AHCI) */ + { RV, RV, RV, RV }, + { P0, P2, IDE, IDE }, /* 10b (IDE mode) */ + { RV, RV, RV, RV }, + }, +}; + +static const struct piix_map_db ich8_2port_map_db = { + .mask = 0x3, + .port_enable = 0x3, + .map = { + /* PM PS SM SS MAP */ + { P0, NA, P1, NA }, /* 00b */ + { RV, RV, RV, RV }, /* 01b */ + { RV, RV, RV, RV }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + +static const struct piix_map_db ich8m_apple_map_db = { + .mask = 0x3, + .port_enable = 0x1, + .map = { + /* PM PS SM SS MAP */ + { P0, NA, NA, NA }, /* 00b */ + { RV, RV, RV, RV }, + { P0, P2, IDE, IDE }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + +static const struct piix_map_db tolapai_map_db = { + .mask = 0x3, + .port_enable = 0x3, + .map = { + /* PM PS SM SS MAP */ + { P0, NA, P1, NA }, /* 00b */ + { RV, RV, RV, RV }, /* 01b */ + { RV, RV, RV, RV }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + +static const struct piix_map_db *piix_map_db_table[] = { + [ich5_sata] = &ich5_map_db, + [ich6_sata] = &ich6_map_db, + [ich6m_sata] = &ich6m_map_db, + [ich8_sata] = &ich8_map_db, + [ich8_2port_sata] = &ich8_2port_map_db, + [ich8m_apple_sata] = &ich8m_apple_map_db, + [tolapai_sata] = &tolapai_map_db, + [ich8_sata_snb] = &ich8_map_db, + [ich8_2port_sata_snb] = &ich8_2port_map_db, + [ich8_2port_sata_byt] = &ich8_2port_map_db, +}; + +static struct pci_bits piix_enable_bits[] = { + { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ + { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ +}; + +MODULE_AUTHOR("Andre Hedrick, Alan Cox, Andrzej Krzysztofowicz, Jeff Garzik"); +MODULE_DESCRIPTION("SCSI low-level driver for Intel PIIX/ICH ATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, piix_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +struct ich_laptop { + u16 device; + u16 subvendor; + u16 subdevice; +}; + +/* + * List of laptops that use short cables rather than 80 wire + */ + +static const struct ich_laptop ich_laptop[] = { + /* devid, subvendor, subdev */ + { 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */ + { 0x27DF, 0x1025, 0x0102 }, /* ICH7 on Acer 5602aWLMi */ + { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */ + { 0x27DF, 0x1028, 0x02b0 }, /* ICH7 on unknown Dell */ + { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ + { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ + { 0x27DF, 0x103C, 0x361a }, /* ICH7 on unknown HP */ + { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */ + { 0x27DF, 0x152D, 0x0778 }, /* ICH7 on unknown Intel */ + { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */ + { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */ + { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */ + { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ + { 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */ + /* end marker */ + { 0, } +}; + +static int piix_port_start(struct ata_port *ap) +{ + if (!(ap->flags & PIIX_FLAG_PIO16)) + ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE; + + return ata_bmdma_port_start(ap); +} + +/** + * ich_pata_cable_detect - Probe host controller cable detect info + * @ap: Port for which cable detect info is desired + * + * Read 80c cable indicator from ATA PCI device's PCI config + * register. This register is normally set by firmware (BIOS). + * + * LOCKING: + * None (inherited from caller). + */ + +static int ich_pata_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct piix_host_priv *hpriv = ap->host->private_data; + const struct ich_laptop *lap = &ich_laptop[0]; + u8 mask; + + /* Check for specials */ + while (lap->device) { + if (lap->device == pdev->device && + lap->subvendor == pdev->subsystem_vendor && + lap->subdevice == pdev->subsystem_device) + return ATA_CBL_PATA40_SHORT; + + lap++; + } + + /* check BIOS cable detect results */ + mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC; + if ((hpriv->saved_iocfg & mask) == 0) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + +/** + * piix_pata_prereset - prereset for PATA host controller + * @link: Target link + * @deadline: deadline jiffies for the operation + * + * LOCKING: + * None (inherited from caller). + */ +static int piix_pata_prereset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) + return -ENOENT; + return ata_sff_prereset(link, deadline); +} + +static DEFINE_SPINLOCK(piix_lock); + +static void piix_set_timings(struct ata_port *ap, struct ata_device *adev, + u8 pio) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned long flags; + unsigned int is_slave = (adev->devno != 0); + unsigned int master_port= ap->port_no ? 0x42 : 0x40; + unsigned int slave_port = 0x44; + u16 master_data; + u8 slave_data; + u8 udma_enable; + int control = 0; + + /* + * See Intel Document 298600-004 for the timing programing rules + * for ICH controllers. + */ + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + if (pio >= 2) + control |= 1; /* TIME1 enable */ + if (ata_pio_need_iordy(adev)) + control |= 2; /* IE enable */ + /* Intel specifies that the PPE functionality is for disk only */ + if (adev->class == ATA_DEV_ATA) + control |= 4; /* PPE enable */ + /* + * If the drive MWDMA is faster than it can do PIO then + * we must force PIO into PIO0 + */ + if (adev->pio_mode < XFER_PIO_0 + pio) + /* Enable DMA timing only */ + control |= 8; /* PIO cycles in PIO0 */ + + spin_lock_irqsave(&piix_lock, flags); + + /* PIO configuration clears DTE unconditionally. It will be + * programmed in set_dmamode which is guaranteed to be called + * after set_piomode if any DMA mode is available. + */ + pci_read_config_word(dev, master_port, &master_data); + if (is_slave) { + /* clear TIME1|IE1|PPE1|DTE1 */ + master_data &= 0xff0f; + /* enable PPE1, IE1 and TIME1 as needed */ + master_data |= (control << 4); + pci_read_config_byte(dev, slave_port, &slave_data); + slave_data &= (ap->port_no ? 0x0f : 0xf0); + /* Load the timing nibble for this slave */ + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) + << (ap->port_no ? 4 : 0); + } else { + /* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */ + master_data &= 0xccf0; + /* Enable PPE, IE and TIME as appropriate */ + master_data |= control; + /* load ISP and RCT */ + master_data |= + (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } + + /* Enable SITRE (separate slave timing register) */ + master_data |= 0x4000; + pci_write_config_word(dev, master_port, master_data); + if (is_slave) + pci_write_config_byte(dev, slave_port, slave_data); + + /* Ensure the UDMA bit is off - it will be turned back on if + UDMA is selected */ + + if (ap->udma_mask) { + pci_read_config_byte(dev, 0x48, &udma_enable); + udma_enable &= ~(1 << (2 * ap->port_no + adev->devno)); + pci_write_config_byte(dev, 0x48, udma_enable); + } + + spin_unlock_irqrestore(&piix_lock, flags); +} + +/** + * piix_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Drive in question + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + piix_set_timings(ap, adev, adev->pio_mode - XFER_PIO_0); +} + +/** + * do_pata_set_dmamode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Drive in question + * @isich: set if the chip is an ICH device + * + * Set UDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, int isich) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned long flags; + u8 speed = adev->dma_mode; + int devid = adev->devno + 2 * ap->port_no; + u8 udma_enable = 0; + + if (speed >= XFER_UDMA_0) { + unsigned int udma = speed - XFER_UDMA_0; + u16 udma_timing; + u16 ideconf; + int u_clock, u_speed; + + spin_lock_irqsave(&piix_lock, flags); + + pci_read_config_byte(dev, 0x48, &udma_enable); + + /* + * UDMA is handled by a combination of clock switching and + * selection of dividers + * + * Handy rule: Odd modes are UDMATIMx 01, even are 02 + * except UDMA0 which is 00 + */ + u_speed = min(2 - (udma & 1), udma); + if (udma == 5) + u_clock = 0x1000; /* 100Mhz */ + else if (udma > 2) + u_clock = 1; /* 66Mhz */ + else + u_clock = 0; /* 33Mhz */ + + udma_enable |= (1 << devid); + + /* Load the CT/RP selection */ + pci_read_config_word(dev, 0x4A, &udma_timing); + udma_timing &= ~(3 << (4 * devid)); + udma_timing |= u_speed << (4 * devid); + pci_write_config_word(dev, 0x4A, udma_timing); + + if (isich) { + /* Select a 33/66/100Mhz clock */ + pci_read_config_word(dev, 0x54, &ideconf); + ideconf &= ~(0x1001 << devid); + ideconf |= u_clock << devid; + /* For ICH or later we should set bit 10 for better + performance (WR_PingPong_En) */ + pci_write_config_word(dev, 0x54, ideconf); + } + + pci_write_config_byte(dev, 0x48, udma_enable); + + spin_unlock_irqrestore(&piix_lock, flags); + } else { + /* MWDMA is driven by the PIO timings. */ + unsigned int mwdma = speed - XFER_MW_DMA_0; + const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + + /* XFER_PIO_0 is never used currently */ + piix_set_timings(ap, adev, pio); + } +} + +/** + * piix_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set MW/UDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + do_pata_set_dmamode(ap, adev, 0); +} + +/** + * ich_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set MW/UDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + do_pata_set_dmamode(ap, adev, 1); +} + +/* + * Serial ATA Index/Data Pair Superset Registers access + * + * Beginning from ICH8, there's a sane way to access SCRs using index + * and data register pair located at BAR5 which means that we have + * separate SCRs for master and slave. This is handled using libata + * slave_link facility. + */ +static const int piix_sidx_map[] = { + [SCR_STATUS] = 0, + [SCR_ERROR] = 2, + [SCR_CONTROL] = 1, +}; + +static void piix_sidpr_sel(struct ata_link *link, unsigned int reg) +{ + struct ata_port *ap = link->ap; + struct piix_host_priv *hpriv = ap->host->private_data; + + iowrite32(((ap->port_no * 2 + link->pmp) << 8) | piix_sidx_map[reg], + hpriv->sidpr + PIIX_SIDPR_IDX); +} + +static int piix_sidpr_scr_read(struct ata_link *link, + unsigned int reg, u32 *val) +{ + struct piix_host_priv *hpriv = link->ap->host->private_data; + + if (reg >= ARRAY_SIZE(piix_sidx_map)) + return -EINVAL; + + piix_sidpr_sel(link, reg); + *val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA); + return 0; +} + +static int piix_sidpr_scr_write(struct ata_link *link, + unsigned int reg, u32 val) +{ + struct piix_host_priv *hpriv = link->ap->host->private_data; + + if (reg >= ARRAY_SIZE(piix_sidx_map)) + return -EINVAL; + + piix_sidpr_sel(link, reg); + iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA); + return 0; +} + +static int piix_sidpr_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints) +{ + return sata_link_scr_lpm(link, policy, false); +} + +static bool piix_irq_check(struct ata_port *ap) +{ + if (unlikely(!ap->ioaddr.bmdma_addr)) + return false; + + return ap->ops->bmdma_status(ap) & ATA_DMA_INTR; +} + +#ifdef CONFIG_PM_SLEEP +static int piix_broken_suspend(void) +{ + static const struct dmi_system_id sysids[] = { + { + .ident = "TECRA M3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M3"), + }, + }, + { + .ident = "TECRA M3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Tecra M3"), + }, + }, + { + .ident = "TECRA M4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Tecra M4"), + }, + }, + { + .ident = "TECRA M4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M4"), + }, + }, + { + .ident = "TECRA M5", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M5"), + }, + }, + { + .ident = "TECRA M6", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M6"), + }, + }, + { + .ident = "TECRA M7", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M7"), + }, + }, + { + .ident = "TECRA A8", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A8"), + }, + }, + { + .ident = "Satellite R20", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite R20"), + }, + }, + { + .ident = "Satellite R25", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite R25"), + }, + }, + { + .ident = "Satellite U200", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U200"), + }, + }, + { + .ident = "Satellite U200", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE U200"), + }, + }, + { + .ident = "Satellite Pro U200", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE PRO U200"), + }, + }, + { + .ident = "Satellite U205", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U205"), + }, + }, + { + .ident = "SATELLITE U205", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE U205"), + }, + }, + { + .ident = "Satellite Pro A120", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite Pro A120"), + }, + }, + { + .ident = "Portege M500", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M500"), + }, + }, + { + .ident = "VGN-BX297XP", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-BX297XP"), + }, + }, + + { } /* terminate list */ + }; + static const char *oemstrs[] = { + "Tecra M3,", + }; + int i; + + if (dmi_check_system(sysids)) + return 1; + + for (i = 0; i < ARRAY_SIZE(oemstrs); i++) + if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL)) + return 1; + + /* TECRA M4 sometimes forgets its identify and reports bogus + * DMI information. As the bogus information is a bit + * generic, match as many entries as possible. This manual + * matching is necessary because dmi_system_id.matches is + * limited to four entries. + */ + if (dmi_match(DMI_SYS_VENDOR, "TOSHIBA") && + dmi_match(DMI_PRODUCT_NAME, "000000") && + dmi_match(DMI_PRODUCT_VERSION, "000000") && + dmi_match(DMI_PRODUCT_SERIAL, "000000") && + dmi_match(DMI_BOARD_VENDOR, "TOSHIBA") && + dmi_match(DMI_BOARD_NAME, "Portable PC") && + dmi_match(DMI_BOARD_VERSION, "Version A0")) + return 1; + + return 0; +} + +static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host *host = pci_get_drvdata(pdev); + unsigned long flags; + int rc = 0; + + rc = ata_host_suspend(host, mesg); + if (rc) + return rc; + + /* Some braindamaged ACPI suspend implementations expect the + * controller to be awake on entry; otherwise, it burns cpu + * cycles and power trying to do something to the sleeping + * beauty. + */ + if (piix_broken_suspend() && (mesg.event & PM_EVENT_SLEEP)) { + pci_save_state(pdev); + + /* mark its power state as "unknown", since we don't + * know if e.g. the BIOS will change its device state + * when we suspend. + */ + if (pdev->current_state == PCI_D0) + pdev->current_state = PCI_UNKNOWN; + + /* tell resume that it's waking up from broken suspend */ + spin_lock_irqsave(&host->lock, flags); + host->flags |= PIIX_HOST_BROKEN_SUSPEND; + spin_unlock_irqrestore(&host->lock, flags); + } else + ata_pci_device_do_suspend(pdev, mesg); + + return 0; +} + +static int piix_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + unsigned long flags; + int rc; + + if (host->flags & PIIX_HOST_BROKEN_SUSPEND) { + spin_lock_irqsave(&host->lock, flags); + host->flags &= ~PIIX_HOST_BROKEN_SUSPEND; + spin_unlock_irqrestore(&host->lock, flags); + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + /* PCI device wasn't disabled during suspend. Use + * pci_reenable_device() to avoid affecting the enable + * count. + */ + rc = pci_reenable_device(pdev); + if (rc) + dev_err(&pdev->dev, + "failed to enable device after resume (%d)\n", + rc); + } else + rc = ata_pci_device_do_resume(pdev); + + if (rc == 0) + ata_host_resume(host); + + return rc; +} +#endif + +static u8 piix_vmw_bmdma_status(struct ata_port *ap) +{ + return ata_bmdma_status(ap) & ~ATA_DMA_ERR; +} + +static struct scsi_host_template piix_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations piix_sata_ops = { + .inherits = &ata_bmdma32_port_ops, + .sff_irq_check = piix_irq_check, + .port_start = piix_port_start, +}; + +static struct ata_port_operations piix_pata_ops = { + .inherits = &piix_sata_ops, + .cable_detect = ata_cable_40wire, + .set_piomode = piix_set_piomode, + .set_dmamode = piix_set_dmamode, + .prereset = piix_pata_prereset, +}; + +static struct ata_port_operations piix_vmw_ops = { + .inherits = &piix_pata_ops, + .bmdma_status = piix_vmw_bmdma_status, +}; + +static struct ata_port_operations ich_pata_ops = { + .inherits = &piix_pata_ops, + .cable_detect = ich_pata_cable_detect, + .set_dmamode = ich_set_dmamode, +}; + +static struct device_attribute *piix_sidpr_shost_attrs[] = { + &dev_attr_link_power_management_policy, + NULL +}; + +static struct scsi_host_template piix_sidpr_sht = { + ATA_BMDMA_SHT(DRV_NAME), + .shost_attrs = piix_sidpr_shost_attrs, +}; + +static struct ata_port_operations piix_sidpr_sata_ops = { + .inherits = &piix_sata_ops, + .hardreset = sata_std_hardreset, + .scr_read = piix_sidpr_scr_read, + .scr_write = piix_sidpr_scr_write, + .set_lpm = piix_sidpr_set_lpm, +}; + +static struct ata_port_info piix_port_info[] = { + [piix_pata_mwdma] = /* PIIX3 MWDMA only */ + { + .flags = PIIX_PATA_FLAGS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .port_ops = &piix_pata_ops, + }, + + [piix_pata_33] = /* PIIX4 at 33MHz */ + { + .flags = PIIX_PATA_FLAGS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .udma_mask = ATA_UDMA2, + .port_ops = &piix_pata_ops, + }, + + [ich_pata_33] = /* ICH0 - ICH at 33Mhz*/ + { + .flags = PIIX_PATA_FLAGS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* Check: maybe MWDMA0 is ok */ + .udma_mask = ATA_UDMA2, + .port_ops = &ich_pata_ops, + }, + + [ich_pata_66] = /* ICH controllers up to 66MHz */ + { + .flags = PIIX_PATA_FLAGS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* MWDMA0 is broken on chip */ + .udma_mask = ATA_UDMA4, + .port_ops = &ich_pata_ops, + }, + + [ich_pata_100] = + { + .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .udma_mask = ATA_UDMA5, + .port_ops = &ich_pata_ops, + }, + + [ich_pata_100_nomwdma1] = + { + .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2_ONLY, + .udma_mask = ATA_UDMA5, + .port_ops = &ich_pata_ops, + }, + + [ich5_sata] = + { + .flags = PIIX_SATA_FLAGS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, + + [ich6_sata] = + { + .flags = PIIX_SATA_FLAGS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, + + [ich6m_sata] = + { + .flags = PIIX_SATA_FLAGS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, + + [ich8_sata] = + { + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, + + [ich8_2port_sata] = + { + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, + + [tolapai_sata] = + { + .flags = PIIX_SATA_FLAGS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, + + [ich8m_apple_sata] = + { + .flags = PIIX_SATA_FLAGS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, + + [piix_pata_vmw] = + { + .flags = PIIX_PATA_FLAGS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .udma_mask = ATA_UDMA2, + .port_ops = &piix_vmw_ops, + }, + + /* + * some Sandybridge chipsets have broken 32 mode up to now, + * see https://bugzilla.kernel.org/show_bug.cgi?id=40592 + */ + [ich8_sata_snb] = + { + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR | PIIX_FLAG_PIO16, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, + + [ich8_2port_sata_snb] = + { + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR + | PIIX_FLAG_PIO16, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, + + [ich8_2port_sata_byt] = + { + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR | PIIX_FLAG_PIO16, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, + +}; + +#define AHCI_PCI_BAR 5 +#define AHCI_GLOBAL_CTL 0x04 +#define AHCI_ENABLE (1 << 31) +static int piix_disable_ahci(struct pci_dev *pdev) +{ + void __iomem *mmio; + u32 tmp; + int rc = 0; + + /* BUG: pci_enable_device has not yet been called. This + * works because this device is usually set up by BIOS. + */ + + if (!pci_resource_start(pdev, AHCI_PCI_BAR) || + !pci_resource_len(pdev, AHCI_PCI_BAR)) + return 0; + + mmio = pci_iomap(pdev, AHCI_PCI_BAR, 64); + if (!mmio) + return -ENOMEM; + + tmp = ioread32(mmio + AHCI_GLOBAL_CTL); + if (tmp & AHCI_ENABLE) { + tmp &= ~AHCI_ENABLE; + iowrite32(tmp, mmio + AHCI_GLOBAL_CTL); + + tmp = ioread32(mmio + AHCI_GLOBAL_CTL); + if (tmp & AHCI_ENABLE) + rc = -EIO; + } + + pci_iounmap(pdev, mmio); + return rc; +} + +/** + * piix_check_450nx_errata - Check for problem 450NX setup + * @ata_dev: the PCI device to check + * + * Check for the present of 450NX errata #19 and errata #25. If + * they are found return an error code so we can turn off DMA + */ + +static int piix_check_450nx_errata(struct pci_dev *ata_dev) +{ + struct pci_dev *pdev = NULL; + u16 cfg; + int no_piix_dma = 0; + + while ((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL) { + /* Look for 450NX PXB. Check for problem configurations + A PCI quirk checks bit 6 already */ + pci_read_config_word(pdev, 0x41, &cfg); + /* Only on the original revision: IDE DMA can hang */ + if (pdev->revision == 0x00) + no_piix_dma = 1; + /* On all revisions below 5 PXB bus lock must be disabled for IDE */ + else if (cfg & (1<<14) && pdev->revision < 5) + no_piix_dma = 2; + } + if (no_piix_dma) + dev_warn(&ata_dev->dev, + "450NX errata present, disabling IDE DMA%s\n", + no_piix_dma == 2 ? " - a BIOS update may resolve this" + : ""); + + return no_piix_dma; +} + +static void piix_init_pcs(struct ata_host *host, + const struct piix_map_db *map_db) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + u16 pcs, new_pcs; + + pci_read_config_word(pdev, ICH5_PCS, &pcs); + + new_pcs = pcs | map_db->port_enable; + + if (new_pcs != pcs) { + DPRINTK("updating PCS from 0x%x to 0x%x\n", pcs, new_pcs); + pci_write_config_word(pdev, ICH5_PCS, new_pcs); + msleep(150); + } +} + +static const int *piix_init_sata_map(struct pci_dev *pdev, + struct ata_port_info *pinfo, + const struct piix_map_db *map_db) +{ + const int *map; + int i, invalid_map = 0; + u8 map_value; + char buf[32]; + char *p = buf, *end = buf + sizeof(buf); + + pci_read_config_byte(pdev, ICH5_PMR, &map_value); + + map = map_db->map[map_value & map_db->mask]; + + for (i = 0; i < 4; i++) { + switch (map[i]) { + case RV: + invalid_map = 1; + p += scnprintf(p, end - p, " XX"); + break; + + case NA: + p += scnprintf(p, end - p, " --"); + break; + + case IDE: + WARN_ON((i & 1) || map[i + 1] != IDE); + pinfo[i / 2] = piix_port_info[ich_pata_100]; + i++; + p += scnprintf(p, end - p, " IDE IDE"); + break; + + default: + p += scnprintf(p, end - p, " P%d", map[i]); + if (i & 1) + pinfo[i / 2].flags |= ATA_FLAG_SLAVE_POSS; + break; + } + } + dev_info(&pdev->dev, "MAP [%s ]\n", buf); + + if (invalid_map) + dev_err(&pdev->dev, "invalid MAP value %u\n", map_value); + + return map; +} + +static bool piix_no_sidpr(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + + /* + * Samsung DB-P70 only has three ATA ports exposed and + * curiously the unconnected first port reports link online + * while not responding to SRST protocol causing excessive + * detection delay. + * + * Unfortunately, the system doesn't carry enough DMI + * information to identify the machine but does have subsystem + * vendor and device set. As it's unclear whether the + * subsystem vendor/device is used only for this specific + * board, the port can't be disabled solely with the + * information; however, turning off SIDPR access works around + * the problem. Turn it off. + * + * This problem is reported in bnc#441240. + * + * https://bugzilla.novell.com/show_bug.cgi?id=441420 + */ + if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 && + pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG && + pdev->subsystem_device == 0xb049) { + dev_warn(host->dev, + "Samsung DB-P70 detected, disabling SIDPR\n"); + return true; + } + + return false; +} + +static int piix_init_sidpr(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + struct piix_host_priv *hpriv = host->private_data; + struct ata_link *link0 = &host->ports[0]->link; + u32 scontrol; + int i, rc; + + /* check for availability */ + for (i = 0; i < 4; i++) + if (hpriv->map[i] == IDE) + return 0; + + /* is it blacklisted? */ + if (piix_no_sidpr(host)) + return 0; + + if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR)) + return 0; + + if (pci_resource_start(pdev, PIIX_SIDPR_BAR) == 0 || + pci_resource_len(pdev, PIIX_SIDPR_BAR) != PIIX_SIDPR_LEN) + return 0; + + if (pcim_iomap_regions(pdev, 1 << PIIX_SIDPR_BAR, DRV_NAME)) + return 0; + + hpriv->sidpr = pcim_iomap_table(pdev)[PIIX_SIDPR_BAR]; + + /* SCR access via SIDPR doesn't work on some configurations. + * Give it a test drive by inhibiting power save modes which + * we'll do anyway. + */ + piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol); + + /* if IPM is already 3, SCR access is probably working. Don't + * un-inhibit power save modes as BIOS might have inhibited + * them for a reason. + */ + if ((scontrol & 0xf00) != 0x300) { + scontrol |= 0x300; + piix_sidpr_scr_write(link0, SCR_CONTROL, scontrol); + piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol); + + if ((scontrol & 0xf00) != 0x300) { + dev_info(host->dev, + "SCR access via SIDPR is available but doesn't work\n"); + return 0; + } + } + + /* okay, SCRs available, set ops and ask libata for slave_link */ + for (i = 0; i < 2; i++) { + struct ata_port *ap = host->ports[i]; + + ap->ops = &piix_sidpr_sata_ops; + + if (ap->flags & ATA_FLAG_SLAVE_POSS) { + rc = ata_slave_link_init(ap); + if (rc) + return rc; + } + } + + return 0; +} + +static void piix_iocfg_bit18_quirk(struct ata_host *host) +{ + static const struct dmi_system_id sysids[] = { + { + /* Clevo M570U sets IOCFG bit 18 if the cdrom + * isn't used to boot the system which + * disables the channel. + */ + .ident = "M570U", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."), + DMI_MATCH(DMI_PRODUCT_NAME, "M570U"), + }, + }, + + { } /* terminate list */ + }; + struct pci_dev *pdev = to_pci_dev(host->dev); + struct piix_host_priv *hpriv = host->private_data; + + if (!dmi_check_system(sysids)) + return; + + /* The datasheet says that bit 18 is NOOP but certain systems + * seem to use it to disable a channel. Clear the bit on the + * affected systems. + */ + if (hpriv->saved_iocfg & (1 << 18)) { + dev_info(&pdev->dev, "applying IOCFG bit18 quirk\n"); + pci_write_config_dword(pdev, PIIX_IOCFG, + hpriv->saved_iocfg & ~(1 << 18)); + } +} + +static bool piix_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq 2510p", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 2510p"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, + { + .ident = "HP Compaq nc6000", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nc6000"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + +static int prefer_ms_hyperv = 1; +module_param(prefer_ms_hyperv, int, 0); +MODULE_PARM_DESC(prefer_ms_hyperv, + "Prefer Hyper-V paravirtualization drivers instead of ATA, " + "0 - Use ATA drivers, " + "1 (Default) - Use the paravirtualization drivers."); + +static void piix_ignore_devices_quirk(struct ata_host *host) +{ +#if IS_ENABLED(CONFIG_HYPERV_STORAGE) + static const struct dmi_system_id ignore_hyperv[] = { + { + /* On Hyper-V hypervisors the disks are exposed on + * both the emulated SATA controller and on the + * paravirtualised drivers. The CD/DVD devices + * are only exposed on the emulated controller. + * Request we ignore ATA devices on this host. + */ + .ident = "Hyper-V Virtual Machine", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "Microsoft Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"), + }, + }, + { } /* terminate list */ + }; + static const struct dmi_system_id allow_virtual_pc[] = { + { + /* In MS Virtual PC guests the DMI ident is nearly + * identical to a Hyper-V guest. One difference is the + * product version which is used here to identify + * a Virtual PC guest. This entry allows ata_piix to + * drive the emulated hardware. + */ + .ident = "MS Virtual PC 2007", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "Microsoft Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"), + DMI_MATCH(DMI_PRODUCT_VERSION, "VS2005R2"), + }, + }, + { } /* terminate list */ + }; + const struct dmi_system_id *ignore = dmi_first_match(ignore_hyperv); + const struct dmi_system_id *allow = dmi_first_match(allow_virtual_pc); + + if (ignore && !allow && prefer_ms_hyperv) { + host->flags |= ATA_HOST_IGNORE_ATA; + dev_info(host->dev, "%s detected, ATA device ignore set\n", + ignore->ident); + } +#endif +} + +/** + * piix_init_one - Register PIIX ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in piix_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct device *dev = &pdev->dev; + struct ata_port_info port_info[2]; + const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] }; + struct scsi_host_template *sht = &piix_sht; + unsigned long port_flags; + struct ata_host *host; + struct piix_host_priv *hpriv; + int rc; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* no hotplugging support for later devices (FIXME) */ + if (!in_module_init && ent->driver_data >= ich5_sata) + return -ENODEV; + + if (piix_broken_system_poweroff(pdev)) { + piix_port_info[ent->driver_data].flags |= + ATA_FLAG_NO_POWEROFF_SPINDOWN | + ATA_FLAG_NO_HIBERNATE_SPINDOWN; + dev_info(&pdev->dev, "quirky BIOS, skipping spindown " + "on poweroff and hibernation\n"); + } + + port_info[0] = piix_port_info[ent->driver_data]; + port_info[1] = piix_port_info[ent->driver_data]; + + port_flags = port_info[0].flags; + + /* enable device and prepare host */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + + /* Save IOCFG, this will be used for cable detection, quirk + * detection and restoration on detach. This is necessary + * because some ACPI implementations mess up cable related + * bits on _STM. Reported on kernel bz#11879. + */ + pci_read_config_dword(pdev, PIIX_IOCFG, &hpriv->saved_iocfg); + + /* ICH6R may be driven by either ata_piix or ahci driver + * regardless of BIOS configuration. Make sure AHCI mode is + * off. + */ + if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) { + rc = piix_disable_ahci(pdev); + if (rc) + return rc; + } + + /* SATA map init can change port_info, do it before prepping host */ + if (port_flags & ATA_FLAG_SATA) + hpriv->map = piix_init_sata_map(pdev, port_info, + piix_map_db_table[ent->driver_data]); + + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); + if (rc) + return rc; + host->private_data = hpriv; + + /* initialize controller */ + if (port_flags & ATA_FLAG_SATA) { + piix_init_pcs(host, piix_map_db_table[ent->driver_data]); + rc = piix_init_sidpr(host); + if (rc) + return rc; + if (host->ports[0]->ops == &piix_sidpr_sata_ops) + sht = &piix_sidpr_sht; + } + + /* apply IOCFG bit18 quirk */ + piix_iocfg_bit18_quirk(host); + + /* On ICH5, some BIOSen disable the interrupt using the + * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3. + * On ICH6, this bit has the same effect, but only when + * MSI is disabled (and it is disabled, as we don't use + * message-signalled interrupts currently). + */ + if (port_flags & PIIX_FLAG_CHECKINTR) + pci_intx(pdev, 1); + + if (piix_check_450nx_errata(pdev)) { + /* This writes into the master table but it does not + really matter for this errata as we will apply it to + all the PIIX devices on the board */ + host->ports[0]->mwdma_mask = 0; + host->ports[0]->udma_mask = 0; + host->ports[1]->mwdma_mask = 0; + host->ports[1]->udma_mask = 0; + } + host->flags |= ATA_HOST_PARALLEL_SCAN; + + /* Allow hosts to specify device types to ignore when scanning. */ + piix_ignore_devices_quirk(host); + + pci_set_master(pdev); + return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht); +} + +static void piix_remove_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + struct piix_host_priv *hpriv = host->private_data; + + pci_write_config_dword(pdev, PIIX_IOCFG, hpriv->saved_iocfg); + + ata_pci_remove_one(pdev); +} + +static struct pci_driver piix_pci_driver = { + .name = DRV_NAME, + .id_table = piix_pci_tbl, + .probe = piix_init_one, + .remove = piix_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = piix_pci_device_suspend, + .resume = piix_pci_device_resume, +#endif +}; + +static int __init piix_init(void) +{ + int rc; + + DPRINTK("pci_register_driver\n"); + rc = pci_register_driver(&piix_pci_driver); + if (rc) + return rc; + + in_module_init = 0; + + DPRINTK("done\n"); + return 0; +} + +static void __exit piix_exit(void) +{ + pci_unregister_driver(&piix_pci_driver); +} + +module_init(piix_init); +module_exit(piix_exit); diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c new file mode 100644 index 000000000..e948e2147 --- /dev/null +++ b/drivers/ata/libahci.c @@ -0,0 +1,2551 @@ +/* + * libahci.c - Common AHCI SATA low-level routines + * + * Maintained by: Tejun Heo + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2004-2005 Red Hat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * AHCI hardware documentation: + * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf + * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ahci.h" +#include "libata.h" + +static int ahci_skip_host_reset; +int ahci_ignore_sss; +EXPORT_SYMBOL_GPL(ahci_ignore_sss); + +module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444); +MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)"); + +module_param_named(ignore_sss, ahci_ignore_sss, int, 0444); +MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)"); + +static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints); +static ssize_t ahci_led_show(struct ata_port *ap, char *buf); +static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, + size_t size); +static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, + ssize_t size); + + + +static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); +static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc); +static int ahci_port_start(struct ata_port *ap); +static void ahci_port_stop(struct ata_port *ap); +static void ahci_qc_prep(struct ata_queued_cmd *qc); +static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc); +static void ahci_freeze(struct ata_port *ap); +static void ahci_thaw(struct ata_port *ap); +static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep); +static void ahci_enable_fbs(struct ata_port *ap); +static void ahci_disable_fbs(struct ata_port *ap); +static void ahci_pmp_attach(struct ata_port *ap); +static void ahci_pmp_detach(struct ata_port *ap); +static int ahci_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static int ahci_pmp_retry_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static int ahci_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static void ahci_postreset(struct ata_link *link, unsigned int *class); +static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); +static void ahci_dev_config(struct ata_device *dev); +#ifdef CONFIG_PM +static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg); +#endif +static ssize_t ahci_activity_show(struct ata_device *dev, char *buf); +static ssize_t ahci_activity_store(struct ata_device *dev, + enum sw_activity val); +static void ahci_init_sw_activity(struct ata_link *link); + +static ssize_t ahci_show_host_caps(struct device *dev, + struct device_attribute *attr, char *buf); +static ssize_t ahci_show_host_cap2(struct device *dev, + struct device_attribute *attr, char *buf); +static ssize_t ahci_show_host_version(struct device *dev, + struct device_attribute *attr, char *buf); +static ssize_t ahci_show_port_cmd(struct device *dev, + struct device_attribute *attr, char *buf); +static ssize_t ahci_read_em_buffer(struct device *dev, + struct device_attribute *attr, char *buf); +static ssize_t ahci_store_em_buffer(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size); +static ssize_t ahci_show_em_supported(struct device *dev, + struct device_attribute *attr, char *buf); + +static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL); +static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL); +static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL); +static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL); +static DEVICE_ATTR(em_buffer, S_IWUSR | S_IRUGO, + ahci_read_em_buffer, ahci_store_em_buffer); +static DEVICE_ATTR(em_message_supported, S_IRUGO, ahci_show_em_supported, NULL); + +struct device_attribute *ahci_shost_attrs[] = { + &dev_attr_link_power_management_policy, + &dev_attr_em_message_type, + &dev_attr_em_message, + &dev_attr_ahci_host_caps, + &dev_attr_ahci_host_cap2, + &dev_attr_ahci_host_version, + &dev_attr_ahci_port_cmd, + &dev_attr_em_buffer, + &dev_attr_em_message_supported, + NULL +}; +EXPORT_SYMBOL_GPL(ahci_shost_attrs); + +struct device_attribute *ahci_sdev_attrs[] = { + &dev_attr_sw_activity, + &dev_attr_unload_heads, + NULL +}; +EXPORT_SYMBOL_GPL(ahci_sdev_attrs); + +struct ata_port_operations ahci_ops = { + .inherits = &sata_pmp_port_ops, + + .qc_defer = ahci_pmp_qc_defer, + .qc_prep = ahci_qc_prep, + .qc_issue = ahci_qc_issue, + .qc_fill_rtf = ahci_qc_fill_rtf, + + .freeze = ahci_freeze, + .thaw = ahci_thaw, + .softreset = ahci_softreset, + .hardreset = ahci_hardreset, + .postreset = ahci_postreset, + .pmp_softreset = ahci_softreset, + .error_handler = ahci_error_handler, + .post_internal_cmd = ahci_post_internal_cmd, + .dev_config = ahci_dev_config, + + .scr_read = ahci_scr_read, + .scr_write = ahci_scr_write, + .pmp_attach = ahci_pmp_attach, + .pmp_detach = ahci_pmp_detach, + + .set_lpm = ahci_set_lpm, + .em_show = ahci_led_show, + .em_store = ahci_led_store, + .sw_activity_show = ahci_activity_show, + .sw_activity_store = ahci_activity_store, + .transmit_led_message = ahci_transmit_led_message, +#ifdef CONFIG_PM + .port_suspend = ahci_port_suspend, + .port_resume = ahci_port_resume, +#endif + .port_start = ahci_port_start, + .port_stop = ahci_port_stop, +}; +EXPORT_SYMBOL_GPL(ahci_ops); + +struct ata_port_operations ahci_pmp_retry_srst_ops = { + .inherits = &ahci_ops, + .softreset = ahci_pmp_retry_softreset, +}; +EXPORT_SYMBOL_GPL(ahci_pmp_retry_srst_ops); + +static bool ahci_em_messages __read_mostly = true; +EXPORT_SYMBOL_GPL(ahci_em_messages); +module_param(ahci_em_messages, bool, 0444); +/* add other LED protocol types when they become supported */ +MODULE_PARM_DESC(ahci_em_messages, + "AHCI Enclosure Management Message control (0 = off, 1 = on)"); + +/* device sleep idle timeout in ms */ +static int devslp_idle_timeout __read_mostly = 1000; +module_param(devslp_idle_timeout, int, 0644); +MODULE_PARM_DESC(devslp_idle_timeout, "device sleep idle timeout"); + +static void ahci_enable_ahci(void __iomem *mmio) +{ + int i; + u32 tmp; + + /* turn on AHCI_EN */ + tmp = readl(mmio + HOST_CTL); + if (tmp & HOST_AHCI_EN) + return; + + /* Some controllers need AHCI_EN to be written multiple times. + * Try a few times before giving up. + */ + for (i = 0; i < 5; i++) { + tmp |= HOST_AHCI_EN; + writel(tmp, mmio + HOST_CTL); + tmp = readl(mmio + HOST_CTL); /* flush && sanity check */ + if (tmp & HOST_AHCI_EN) + return; + msleep(10); + } + + WARN_ON(1); +} + +static ssize_t ahci_show_host_caps(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + struct ahci_host_priv *hpriv = ap->host->private_data; + + return sprintf(buf, "%x\n", hpriv->cap); +} + +static ssize_t ahci_show_host_cap2(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + struct ahci_host_priv *hpriv = ap->host->private_data; + + return sprintf(buf, "%x\n", hpriv->cap2); +} + +static ssize_t ahci_show_host_version(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *mmio = hpriv->mmio; + + return sprintf(buf, "%x\n", readl(mmio + HOST_VERSION)); +} + +static ssize_t ahci_show_port_cmd(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + void __iomem *port_mmio = ahci_port_base(ap); + + return sprintf(buf, "%x\n", readl(port_mmio + PORT_CMD)); +} + +static ssize_t ahci_read_em_buffer(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *mmio = hpriv->mmio; + void __iomem *em_mmio = mmio + hpriv->em_loc; + u32 em_ctl, msg; + unsigned long flags; + size_t count; + int i; + + spin_lock_irqsave(ap->lock, flags); + + em_ctl = readl(mmio + HOST_EM_CTL); + if (!(ap->flags & ATA_FLAG_EM) || em_ctl & EM_CTL_XMT || + !(hpriv->em_msg_type & EM_MSG_TYPE_SGPIO)) { + spin_unlock_irqrestore(ap->lock, flags); + return -EINVAL; + } + + if (!(em_ctl & EM_CTL_MR)) { + spin_unlock_irqrestore(ap->lock, flags); + return -EAGAIN; + } + + if (!(em_ctl & EM_CTL_SMB)) + em_mmio += hpriv->em_buf_sz; + + count = hpriv->em_buf_sz; + + /* the count should not be larger than PAGE_SIZE */ + if (count > PAGE_SIZE) { + if (printk_ratelimit()) + ata_port_warn(ap, + "EM read buffer size too large: " + "buffer size %u, page size %lu\n", + hpriv->em_buf_sz, PAGE_SIZE); + count = PAGE_SIZE; + } + + for (i = 0; i < count; i += 4) { + msg = readl(em_mmio + i); + buf[i] = msg & 0xff; + buf[i + 1] = (msg >> 8) & 0xff; + buf[i + 2] = (msg >> 16) & 0xff; + buf[i + 3] = (msg >> 24) & 0xff; + } + + spin_unlock_irqrestore(ap->lock, flags); + + return i; +} + +static ssize_t ahci_store_em_buffer(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *mmio = hpriv->mmio; + void __iomem *em_mmio = mmio + hpriv->em_loc; + const unsigned char *msg_buf = buf; + u32 em_ctl, msg; + unsigned long flags; + int i; + + /* check size validity */ + if (!(ap->flags & ATA_FLAG_EM) || + !(hpriv->em_msg_type & EM_MSG_TYPE_SGPIO) || + size % 4 || size > hpriv->em_buf_sz) + return -EINVAL; + + spin_lock_irqsave(ap->lock, flags); + + em_ctl = readl(mmio + HOST_EM_CTL); + if (em_ctl & EM_CTL_TM) { + spin_unlock_irqrestore(ap->lock, flags); + return -EBUSY; + } + + for (i = 0; i < size; i += 4) { + msg = msg_buf[i] | msg_buf[i + 1] << 8 | + msg_buf[i + 2] << 16 | msg_buf[i + 3] << 24; + writel(msg, em_mmio + i); + } + + writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL); + + spin_unlock_irqrestore(ap->lock, flags); + + return size; +} + +static ssize_t ahci_show_em_supported(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *mmio = hpriv->mmio; + u32 em_ctl; + + em_ctl = readl(mmio + HOST_EM_CTL); + + return sprintf(buf, "%s%s%s%s\n", + em_ctl & EM_CTL_LED ? "led " : "", + em_ctl & EM_CTL_SAFTE ? "saf-te " : "", + em_ctl & EM_CTL_SES ? "ses-2 " : "", + em_ctl & EM_CTL_SGPIO ? "sgpio " : ""); +} + +/** + * ahci_save_initial_config - Save and fixup initial config values + * @dev: target AHCI device + * @hpriv: host private area to store config values + * + * Some registers containing configuration info might be setup by + * BIOS and might be cleared on reset. This function saves the + * initial values of those registers into @hpriv such that they + * can be restored after controller reset. + * + * If inconsistent, config values are fixed up by this function. + * + * If it is not set already this function sets hpriv->start_engine to + * ahci_start_engine. + * + * LOCKING: + * None. + */ +void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) +{ + void __iomem *mmio = hpriv->mmio; + u32 cap, cap2, vers, port_map; + int i; + + /* make sure AHCI mode is enabled before accessing CAP */ + ahci_enable_ahci(mmio); + + /* Values prefixed with saved_ are written back to host after + * reset. Values without are used for driver operation. + */ + hpriv->saved_cap = cap = readl(mmio + HOST_CAP); + hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL); + + /* CAP2 register is only defined for AHCI 1.2 and later */ + vers = readl(mmio + HOST_VERSION); + if ((vers >> 16) > 1 || + ((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200)) + hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2); + else + hpriv->saved_cap2 = cap2 = 0; + + /* some chips have errata preventing 64bit use */ + if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) { + dev_info(dev, "controller can't do 64bit DMA, forcing 32bit\n"); + cap &= ~HOST_CAP_64; + } + + if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) { + dev_info(dev, "controller can't do NCQ, turning off CAP_NCQ\n"); + cap &= ~HOST_CAP_NCQ; + } + + if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) { + dev_info(dev, "controller can do NCQ, turning on CAP_NCQ\n"); + cap |= HOST_CAP_NCQ; + } + + if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) { + dev_info(dev, "controller can't do PMP, turning off CAP_PMP\n"); + cap &= ~HOST_CAP_PMP; + } + + if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) { + dev_info(dev, + "controller can't do SNTF, turning off CAP_SNTF\n"); + cap &= ~HOST_CAP_SNTF; + } + + if ((cap2 & HOST_CAP2_SDS) && (hpriv->flags & AHCI_HFLAG_NO_DEVSLP)) { + dev_info(dev, + "controller can't do DEVSLP, turning off\n"); + cap2 &= ~HOST_CAP2_SDS; + cap2 &= ~HOST_CAP2_SADM; + } + + if (!(cap & HOST_CAP_FBS) && (hpriv->flags & AHCI_HFLAG_YES_FBS)) { + dev_info(dev, "controller can do FBS, turning on CAP_FBS\n"); + cap |= HOST_CAP_FBS; + } + + if ((cap & HOST_CAP_FBS) && (hpriv->flags & AHCI_HFLAG_NO_FBS)) { + dev_info(dev, "controller can't do FBS, turning off CAP_FBS\n"); + cap &= ~HOST_CAP_FBS; + } + + if (hpriv->force_port_map && port_map != hpriv->force_port_map) { + dev_info(dev, "forcing port_map 0x%x -> 0x%x\n", + port_map, hpriv->force_port_map); + port_map = hpriv->force_port_map; + } + + if (hpriv->mask_port_map) { + dev_warn(dev, "masking port_map 0x%x -> 0x%x\n", + port_map, + port_map & hpriv->mask_port_map); + port_map &= hpriv->mask_port_map; + } + + /* cross check port_map and cap.n_ports */ + if (port_map) { + int map_ports = 0; + + for (i = 0; i < AHCI_MAX_PORTS; i++) + if (port_map & (1 << i)) + map_ports++; + + /* If PI has more ports than n_ports, whine, clear + * port_map and let it be generated from n_ports. + */ + if (map_ports > ahci_nr_ports(cap)) { + dev_warn(dev, + "implemented port map (0x%x) contains more ports than nr_ports (%u), using nr_ports\n", + port_map, ahci_nr_ports(cap)); + port_map = 0; + } + } + + /* fabricate port_map from cap.nr_ports */ + if (!port_map) { + port_map = (1 << ahci_nr_ports(cap)) - 1; + dev_warn(dev, "forcing PORTS_IMPL to 0x%x\n", port_map); + + /* write the fixed up value to the PI register */ + hpriv->saved_port_map = port_map; + } + + /* record values to use during operation */ + hpriv->cap = cap; + hpriv->cap2 = cap2; + hpriv->port_map = port_map; + + if (!hpriv->start_engine) + hpriv->start_engine = ahci_start_engine; +} +EXPORT_SYMBOL_GPL(ahci_save_initial_config); + +/** + * ahci_restore_initial_config - Restore initial config + * @host: target ATA host + * + * Restore initial config stored by ahci_save_initial_config(). + * + * LOCKING: + * None. + */ +static void ahci_restore_initial_config(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->mmio; + + writel(hpriv->saved_cap, mmio + HOST_CAP); + if (hpriv->saved_cap2) + writel(hpriv->saved_cap2, mmio + HOST_CAP2); + writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL); + (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ +} + +static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg) +{ + static const int offset[] = { + [SCR_STATUS] = PORT_SCR_STAT, + [SCR_CONTROL] = PORT_SCR_CTL, + [SCR_ERROR] = PORT_SCR_ERR, + [SCR_ACTIVE] = PORT_SCR_ACT, + [SCR_NOTIFICATION] = PORT_SCR_NTF, + }; + struct ahci_host_priv *hpriv = ap->host->private_data; + + if (sc_reg < ARRAY_SIZE(offset) && + (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF))) + return offset[sc_reg]; + return 0; +} + +static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + int offset = ahci_scr_offset(link->ap, sc_reg); + + if (offset) { + *val = readl(port_mmio + offset); + return 0; + } + return -EINVAL; +} + +static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + int offset = ahci_scr_offset(link->ap, sc_reg); + + if (offset) { + writel(val, port_mmio + offset); + return 0; + } + return -EINVAL; +} + +void ahci_start_engine(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + u32 tmp; + + /* start DMA */ + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_START; + writel(tmp, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* flush */ +} +EXPORT_SYMBOL_GPL(ahci_start_engine); + +int ahci_stop_engine(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + u32 tmp; + + tmp = readl(port_mmio + PORT_CMD); + + /* check if the HBA is idle */ + if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) + return 0; + + /* setting HBA to idle */ + tmp &= ~PORT_CMD_START; + writel(tmp, port_mmio + PORT_CMD); + + /* wait for engine to stop. This could be as long as 500 msec */ + tmp = ata_wait_register(ap, port_mmio + PORT_CMD, + PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); + if (tmp & PORT_CMD_LIST_ON) + return -EIO; + + return 0; +} +EXPORT_SYMBOL_GPL(ahci_stop_engine); + +void ahci_start_fis_rx(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + u32 tmp; + + /* set FIS registers */ + if (hpriv->cap & HOST_CAP_64) + writel((pp->cmd_slot_dma >> 16) >> 16, + port_mmio + PORT_LST_ADDR_HI); + writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); + + if (hpriv->cap & HOST_CAP_64) + writel((pp->rx_fis_dma >> 16) >> 16, + port_mmio + PORT_FIS_ADDR_HI); + writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); + + /* enable FIS reception */ + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_FIS_RX; + writel(tmp, port_mmio + PORT_CMD); + + /* flush */ + readl(port_mmio + PORT_CMD); +} +EXPORT_SYMBOL_GPL(ahci_start_fis_rx); + +static int ahci_stop_fis_rx(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + u32 tmp; + + /* disable FIS reception */ + tmp = readl(port_mmio + PORT_CMD); + tmp &= ~PORT_CMD_FIS_RX; + writel(tmp, port_mmio + PORT_CMD); + + /* wait for completion, spec says 500ms, give it 1000 */ + tmp = ata_wait_register(ap, port_mmio + PORT_CMD, PORT_CMD_FIS_ON, + PORT_CMD_FIS_ON, 10, 1000); + if (tmp & PORT_CMD_FIS_ON) + return -EBUSY; + + return 0; +} + +static void ahci_power_up(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 cmd; + + cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; + + /* spin up device */ + if (hpriv->cap & HOST_CAP_SSS) { + cmd |= PORT_CMD_SPIN_UP; + writel(cmd, port_mmio + PORT_CMD); + } + + /* wake up link */ + writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD); +} + +static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned int hints) +{ + struct ata_port *ap = link->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *ppriv = ap->private_data; + struct ahci_port_priv *pp = ap->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + + if (policy != ATA_LPM_MAX_POWER) { + /* + * Disable interrupts on Phy Ready. This keeps us from + * getting woken up due to spurious phy ready + * interrupts. + */ + pp->intr_mask &= ~PORT_IRQ_PHYRDY; + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); + + sata_link_scr_lpm(link, policy, false); + } + + if (hpriv->cap & HOST_CAP_ALPM) { + u32 cmd = readl(port_mmio + PORT_CMD); + cmd &= ~(PORT_CMD_ASP | PORT_CMD_ALPE); + + if (policy == ATA_LPM_MAX_POWER || !(hints & ATA_LPM_HIPM)) { + cmd |= PORT_CMD_ICC_ACTIVE; + + writel(cmd, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); + + /* wait 10ms to be sure we've come out of LPM state */ + ata_msleep(ap, 10); + } else if (policy == ATA_LPM_FIRMWARE_DEFAULTS) { + if (ppriv->init_alpe) + cmd |= PORT_CMD_ALPE; + if (ppriv->init_asp) + cmd |= PORT_CMD_ASP; + + writel(cmd, port_mmio + PORT_CMD); + } else { + cmd |= PORT_CMD_ALPE; + if (policy == ATA_LPM_MIN_POWER) + cmd |= PORT_CMD_ASP; + + /* write out new cmd value */ + writel(cmd, port_mmio + PORT_CMD); + } + } + + /* set aggressive device sleep */ + if ((hpriv->cap2 & HOST_CAP2_SDS) && + (hpriv->cap2 & HOST_CAP2_SADM) && + (link->device->flags & ATA_DFLAG_DEVSLP)) { + switch (policy) { + case ATA_LPM_MIN_POWER: + ahci_set_aggressive_devslp(ap, true); + break; + case ATA_LPM_FIRMWARE_DEFAULTS: + ahci_set_aggressive_devslp(ap, ppriv->init_devslp); + break; + default: + ahci_set_aggressive_devslp(ap, false); + break; + } + } + + if (policy == ATA_LPM_MAX_POWER) { + sata_link_scr_lpm(link, policy, false); + + /* turn PHYRDY IRQ back on */ + pp->intr_mask |= PORT_IRQ_PHYRDY; + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); + } + + return 0; +} + +#ifdef CONFIG_PM +static void ahci_power_down(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 cmd, scontrol; + + if (!(hpriv->cap & HOST_CAP_SSS)) + return; + + /* put device into listen mode, first set PxSCTL.DET to 0 */ + scontrol = readl(port_mmio + PORT_SCR_CTL); + scontrol &= ~0xf; + writel(scontrol, port_mmio + PORT_SCR_CTL); + + /* then set PxCMD.SUD to 0 */ + cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; + cmd &= ~PORT_CMD_SPIN_UP; + writel(cmd, port_mmio + PORT_CMD); +} +#endif + +static void ahci_start_port(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + struct ata_link *link; + struct ahci_em_priv *emp; + ssize_t rc; + int i; + + /* enable FIS reception */ + ahci_start_fis_rx(ap); + + /* enable DMA */ + if (!(hpriv->flags & AHCI_HFLAG_DELAY_ENGINE)) + hpriv->start_engine(ap); + + /* turn on LEDs */ + if (ap->flags & ATA_FLAG_EM) { + ata_for_each_link(link, ap, EDGE) { + emp = &pp->em_priv[link->pmp]; + + /* EM Transmit bit maybe busy during init */ + for (i = 0; i < EM_MAX_RETRY; i++) { + rc = ap->ops->transmit_led_message(ap, + emp->led_state, + 4); + /* + * If busy, give a breather but do not + * release EH ownership by using msleep() + * instead of ata_msleep(). EM Transmit + * bit is busy for the whole host and + * releasing ownership will cause other + * ports to fail the same way. + */ + if (rc == -EBUSY) + msleep(1); + else + break; + } + } + } + + if (ap->flags & ATA_FLAG_SW_ACTIVITY) + ata_for_each_link(link, ap, EDGE) + ahci_init_sw_activity(link); + +} + +static int ahci_deinit_port(struct ata_port *ap, const char **emsg) +{ + int rc; + + /* disable DMA */ + rc = ahci_stop_engine(ap); + if (rc) { + *emsg = "failed to stop engine"; + return rc; + } + + /* disable FIS reception */ + rc = ahci_stop_fis_rx(ap); + if (rc) { + *emsg = "failed stop FIS RX"; + return rc; + } + + return 0; +} + +int ahci_reset_controller(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->mmio; + u32 tmp; + + /* we must be in AHCI mode, before using anything + * AHCI-specific, such as HOST_RESET. + */ + ahci_enable_ahci(mmio); + + /* global controller reset */ + if (!ahci_skip_host_reset) { + tmp = readl(mmio + HOST_CTL); + if ((tmp & HOST_RESET) == 0) { + writel(tmp | HOST_RESET, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + } + + /* + * to perform host reset, OS should set HOST_RESET + * and poll until this bit is read to be "0". + * reset must complete within 1 second, or + * the hardware should be considered fried. + */ + tmp = ata_wait_register(NULL, mmio + HOST_CTL, HOST_RESET, + HOST_RESET, 10, 1000); + + if (tmp & HOST_RESET) { + dev_err(host->dev, "controller reset failed (0x%x)\n", + tmp); + return -EIO; + } + + /* turn on AHCI mode */ + ahci_enable_ahci(mmio); + + /* Some registers might be cleared on reset. Restore + * initial values. + */ + ahci_restore_initial_config(host); + } else + dev_info(host->dev, "skipping global host reset\n"); + + return 0; +} +EXPORT_SYMBOL_GPL(ahci_reset_controller); + +static void ahci_sw_activity(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + + if (!(link->flags & ATA_LFLAG_SW_ACTIVITY)) + return; + + emp->activity++; + if (!timer_pending(&emp->timer)) + mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10)); +} + +static void ahci_sw_activity_blink(unsigned long arg) +{ + struct ata_link *link = (struct ata_link *)arg; + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + unsigned long led_message = emp->led_state; + u32 activity_led_state; + unsigned long flags; + + led_message &= EM_MSG_LED_VALUE; + led_message |= ap->port_no | (link->pmp << 8); + + /* check to see if we've had activity. If so, + * toggle state of LED and reset timer. If not, + * turn LED to desired idle state. + */ + spin_lock_irqsave(ap->lock, flags); + if (emp->saved_activity != emp->activity) { + emp->saved_activity = emp->activity; + /* get the current LED state */ + activity_led_state = led_message & EM_MSG_LED_VALUE_ON; + + if (activity_led_state) + activity_led_state = 0; + else + activity_led_state = 1; + + /* clear old state */ + led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; + + /* toggle state */ + led_message |= (activity_led_state << 16); + mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100)); + } else { + /* switch to idle */ + led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; + if (emp->blink_policy == BLINK_OFF) + led_message |= (1 << 16); + } + spin_unlock_irqrestore(ap->lock, flags); + ap->ops->transmit_led_message(ap, led_message, 4); +} + +static void ahci_init_sw_activity(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + + /* init activity stats, setup timer */ + emp->saved_activity = emp->activity = 0; + setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link); + + /* check our blink policy and set flag for link if it's enabled */ + if (emp->blink_policy) + link->flags |= ATA_LFLAG_SW_ACTIVITY; +} + +int ahci_reset_em(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->mmio; + u32 em_ctl; + + em_ctl = readl(mmio + HOST_EM_CTL); + if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST)) + return -EINVAL; + + writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL); + return 0; +} +EXPORT_SYMBOL_GPL(ahci_reset_em); + +static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, + ssize_t size) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + void __iomem *mmio = hpriv->mmio; + u32 em_ctl; + u32 message[] = {0, 0}; + unsigned long flags; + int pmp; + struct ahci_em_priv *emp; + + /* get the slot number from the message */ + pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; + if (pmp < EM_MAX_SLOTS) + emp = &pp->em_priv[pmp]; + else + return -EINVAL; + + spin_lock_irqsave(ap->lock, flags); + + /* + * if we are still busy transmitting a previous message, + * do not allow + */ + em_ctl = readl(mmio + HOST_EM_CTL); + if (em_ctl & EM_CTL_TM) { + spin_unlock_irqrestore(ap->lock, flags); + return -EBUSY; + } + + if (hpriv->em_msg_type & EM_MSG_TYPE_LED) { + /* + * create message header - this is all zero except for + * the message size, which is 4 bytes. + */ + message[0] |= (4 << 8); + + /* ignore 0:4 of byte zero, fill in port info yourself */ + message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no); + + /* write message to EM_LOC */ + writel(message[0], mmio + hpriv->em_loc); + writel(message[1], mmio + hpriv->em_loc+4); + + /* + * tell hardware to transmit the message + */ + writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL); + } + + /* save off new led state for port/slot */ + emp->led_state = state; + + spin_unlock_irqrestore(ap->lock, flags); + return size; +} + +static ssize_t ahci_led_show(struct ata_port *ap, char *buf) +{ + struct ahci_port_priv *pp = ap->private_data; + struct ata_link *link; + struct ahci_em_priv *emp; + int rc = 0; + + ata_for_each_link(link, ap, EDGE) { + emp = &pp->em_priv[link->pmp]; + rc += sprintf(buf, "%lx\n", emp->led_state); + } + return rc; +} + +static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, + size_t size) +{ + unsigned int state; + int pmp; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp; + + if (kstrtouint(buf, 0, &state) < 0) + return -EINVAL; + + /* get the slot number from the message */ + pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; + if (pmp < EM_MAX_SLOTS) + emp = &pp->em_priv[pmp]; + else + return -EINVAL; + + /* mask off the activity bits if we are in sw_activity + * mode, user should turn off sw_activity before setting + * activity led through em_message + */ + if (emp->blink_policy) + state &= ~EM_MSG_LED_VALUE_ACTIVITY; + + return ap->ops->transmit_led_message(ap, state, size); +} + +static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + u32 port_led_state = emp->led_state; + + /* save the desired Activity LED behavior */ + if (val == OFF) { + /* clear LFLAG */ + link->flags &= ~(ATA_LFLAG_SW_ACTIVITY); + + /* set the LED to OFF */ + port_led_state &= EM_MSG_LED_VALUE_OFF; + port_led_state |= (ap->port_no | (link->pmp << 8)); + ap->ops->transmit_led_message(ap, port_led_state, 4); + } else { + link->flags |= ATA_LFLAG_SW_ACTIVITY; + if (val == BLINK_OFF) { + /* set LED to ON for idle */ + port_led_state &= EM_MSG_LED_VALUE_OFF; + port_led_state |= (ap->port_no | (link->pmp << 8)); + port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */ + ap->ops->transmit_led_message(ap, port_led_state, 4); + } + } + emp->blink_policy = val; + return 0; +} + +static ssize_t ahci_activity_show(struct ata_device *dev, char *buf) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + + /* display the saved value of activity behavior for this + * disk. + */ + return sprintf(buf, "%d\n", emp->blink_policy); +} + +static void ahci_port_init(struct device *dev, struct ata_port *ap, + int port_no, void __iomem *mmio, + void __iomem *port_mmio) +{ + const char *emsg = NULL; + int rc; + u32 tmp; + + /* make sure port is not active */ + rc = ahci_deinit_port(ap, &emsg); + if (rc) + dev_warn(dev, "%s (%d)\n", emsg, rc); + + /* clear SError */ + tmp = readl(port_mmio + PORT_SCR_ERR); + VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); + writel(tmp, port_mmio + PORT_SCR_ERR); + + /* clear port IRQ */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); + if (tmp) + writel(tmp, port_mmio + PORT_IRQ_STAT); + + writel(1 << port_no, mmio + HOST_IRQ_STAT); +} + +void ahci_init_controller(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->mmio; + int i; + void __iomem *port_mmio; + u32 tmp; + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + port_mmio = ahci_port_base(ap); + if (ata_port_is_dummy(ap)) + continue; + + ahci_port_init(host->dev, ap, i, mmio, port_mmio); + } + + tmp = readl(mmio + HOST_CTL); + VPRINTK("HOST_CTL 0x%x\n", tmp); + writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); + tmp = readl(mmio + HOST_CTL); + VPRINTK("HOST_CTL 0x%x\n", tmp); +} +EXPORT_SYMBOL_GPL(ahci_init_controller); + +static void ahci_dev_config(struct ata_device *dev) +{ + struct ahci_host_priv *hpriv = dev->link->ap->host->private_data; + + if (hpriv->flags & AHCI_HFLAG_SECT255) { + dev->max_sectors = 255; + ata_dev_info(dev, + "SB600 AHCI: limiting to 255 sectors per cmd\n"); + } +} + +unsigned int ahci_dev_classify(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + struct ata_taskfile tf; + u32 tmp; + + tmp = readl(port_mmio + PORT_SIG); + tf.lbah = (tmp >> 24) & 0xff; + tf.lbam = (tmp >> 16) & 0xff; + tf.lbal = (tmp >> 8) & 0xff; + tf.nsect = (tmp) & 0xff; + + return ata_dev_classify(&tf); +} +EXPORT_SYMBOL_GPL(ahci_dev_classify); + +void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, + u32 opts) +{ + dma_addr_t cmd_tbl_dma; + + cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ; + + pp->cmd_slot[tag].opts = cpu_to_le32(opts); + pp->cmd_slot[tag].status = 0; + pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff); + pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16); +} +EXPORT_SYMBOL_GPL(ahci_fill_cmd_slot); + +int ahci_kick_engine(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + struct ahci_host_priv *hpriv = ap->host->private_data; + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + u32 tmp; + int busy, rc; + + /* stop engine */ + rc = ahci_stop_engine(ap); + if (rc) + goto out_restart; + + /* need to do CLO? + * always do CLO if PMP is attached (AHCI-1.3 9.2) + */ + busy = status & (ATA_BUSY | ATA_DRQ); + if (!busy && !sata_pmp_attached(ap)) { + rc = 0; + goto out_restart; + } + + if (!(hpriv->cap & HOST_CAP_CLO)) { + rc = -EOPNOTSUPP; + goto out_restart; + } + + /* perform CLO */ + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_CLO; + writel(tmp, port_mmio + PORT_CMD); + + rc = 0; + tmp = ata_wait_register(ap, port_mmio + PORT_CMD, + PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); + if (tmp & PORT_CMD_CLO) + rc = -EIO; + + /* restart engine */ + out_restart: + hpriv->start_engine(ap); + return rc; +} +EXPORT_SYMBOL_GPL(ahci_kick_engine); + +static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp, + struct ata_taskfile *tf, int is_cmd, u16 flags, + unsigned long timeout_msec) +{ + const u32 cmd_fis_len = 5; /* five dwords */ + struct ahci_port_priv *pp = ap->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u8 *fis = pp->cmd_tbl; + u32 tmp; + + /* prep the command */ + ata_tf_to_fis(tf, pmp, is_cmd, fis); + ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12)); + + /* issue & wait */ + writel(1, port_mmio + PORT_CMD_ISSUE); + + if (timeout_msec) { + tmp = ata_wait_register(ap, port_mmio + PORT_CMD_ISSUE, + 0x1, 0x1, 1, timeout_msec); + if (tmp & 0x1) { + ahci_kick_engine(ap); + return -EBUSY; + } + } else + readl(port_mmio + PORT_CMD_ISSUE); /* flush */ + + return 0; +} + +int ahci_do_softreset(struct ata_link *link, unsigned int *class, + int pmp, unsigned long deadline, + int (*check_ready)(struct ata_link *link)) +{ + struct ata_port *ap = link->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + const char *reason = NULL; + unsigned long now, msecs; + struct ata_taskfile tf; + bool fbs_disabled = false; + int rc; + + DPRINTK("ENTER\n"); + + /* prepare for SRST (AHCI-1.1 10.4.1) */ + rc = ahci_kick_engine(ap); + if (rc && rc != -EOPNOTSUPP) + ata_link_warn(link, "failed to reset engine (errno=%d)\n", rc); + + /* + * According to AHCI-1.2 9.3.9: if FBS is enable, software shall + * clear PxFBS.EN to '0' prior to issuing software reset to devices + * that is attached to port multiplier. + */ + if (!ata_is_host_link(link) && pp->fbs_enabled) { + ahci_disable_fbs(ap); + fbs_disabled = true; + } + + ata_tf_init(link->device, &tf); + + /* issue the first D2H Register FIS */ + msecs = 0; + now = jiffies; + if (time_after(deadline, now)) + msecs = jiffies_to_msecs(deadline - now); + + tf.ctl |= ATA_SRST; + if (ahci_exec_polled_cmd(ap, pmp, &tf, 0, + AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) { + rc = -EIO; + reason = "1st FIS failed"; + goto fail; + } + + /* spec says at least 5us, but be generous and sleep for 1ms */ + ata_msleep(ap, 1); + + /* issue the second D2H Register FIS */ + tf.ctl &= ~ATA_SRST; + ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0); + + /* wait for link to become ready */ + rc = ata_wait_after_reset(link, deadline, check_ready); + if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) { + /* + * Workaround for cases where link online status can't + * be trusted. Treat device readiness timeout as link + * offline. + */ + ata_link_info(link, "device not ready, treating as offline\n"); + *class = ATA_DEV_NONE; + } else if (rc) { + /* link occupied, -ENODEV too is an error */ + reason = "device not ready"; + goto fail; + } else + *class = ahci_dev_classify(ap); + + /* re-enable FBS if disabled before */ + if (fbs_disabled) + ahci_enable_fbs(ap); + + DPRINTK("EXIT, class=%u\n", *class); + return 0; + + fail: + ata_link_err(link, "softreset failed (%s)\n", reason); + return rc; +} + +int ahci_check_ready(struct ata_link *link) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + + return ata_check_ready(status); +} +EXPORT_SYMBOL_GPL(ahci_check_ready); + +static int ahci_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int pmp = sata_srst_pmp(link); + + DPRINTK("ENTER\n"); + + return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); +} +EXPORT_SYMBOL_GPL(ahci_do_softreset); + +static int ahci_bad_pmp_check_ready(struct ata_link *link) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + u32 irq_status = readl(port_mmio + PORT_IRQ_STAT); + + /* + * There is no need to check TFDATA if BAD PMP is found due to HW bug, + * which can save timeout delay. + */ + if (irq_status & PORT_IRQ_BAD_PMP) + return -EIO; + + return ata_check_ready(status); +} + +static int ahci_pmp_retry_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + void __iomem *port_mmio = ahci_port_base(ap); + int pmp = sata_srst_pmp(link); + int rc; + u32 irq_sts; + + DPRINTK("ENTER\n"); + + rc = ahci_do_softreset(link, class, pmp, deadline, + ahci_bad_pmp_check_ready); + + /* + * Soft reset fails with IPMS set when PMP is enabled but + * SATA HDD/ODD is connected to SATA port, do soft reset + * again to port 0. + */ + if (rc == -EIO) { + irq_sts = readl(port_mmio + PORT_IRQ_STAT); + if (irq_sts & PORT_IRQ_BAD_PMP) { + ata_link_warn(link, + "applying PMP SRST workaround " + "and retrying\n"); + rc = ahci_do_softreset(link, class, 0, deadline, + ahci_check_ready); + } + } + + return rc; +} + +static int ahci_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + struct ata_taskfile tf; + bool online; + int rc; + + DPRINTK("ENTER\n"); + + ahci_stop_engine(ap); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.command = ATA_BUSY; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); + + rc = sata_link_hardreset(link, timing, deadline, &online, + ahci_check_ready); + + hpriv->start_engine(ap); + + if (online) + *class = ahci_dev_classify(ap); + + DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); + return rc; +} + +static void ahci_postreset(struct ata_link *link, unsigned int *class) +{ + struct ata_port *ap = link->ap; + void __iomem *port_mmio = ahci_port_base(ap); + u32 new_tmp, tmp; + + ata_std_postreset(link, class); + + /* Make sure port's ATAPI bit is set appropriately */ + new_tmp = tmp = readl(port_mmio + PORT_CMD); + if (*class == ATA_DEV_ATAPI) + new_tmp |= PORT_CMD_ATAPI; + else + new_tmp &= ~PORT_CMD_ATAPI; + if (new_tmp != tmp) { + writel(new_tmp, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* flush */ + } +} + +static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) +{ + struct scatterlist *sg; + struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; + unsigned int si; + + VPRINTK("ENTER\n"); + + /* + * Next, the S/G list. + */ + for_each_sg(qc->sg, sg, qc->n_elem, si) { + dma_addr_t addr = sg_dma_address(sg); + u32 sg_len = sg_dma_len(sg); + + ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff); + ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16); + ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1); + } + + return si; +} + +static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ahci_port_priv *pp = ap->private_data; + + if (!sata_pmp_attached(ap) || pp->fbs_enabled) + return ata_std_qc_defer(qc); + else + return sata_pmp_qc_defer_cmd_switch(qc); +} + +static void ahci_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ahci_port_priv *pp = ap->private_data; + int is_atapi = ata_is_atapi(qc->tf.protocol); + void *cmd_tbl; + u32 opts; + const u32 cmd_fis_len = 5; /* five dwords */ + unsigned int n_elem; + + /* + * Fill in command table information. First, the header, + * a SATA Register - Host to Device command FIS. + */ + cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ; + + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl); + if (is_atapi) { + memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); + memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); + } + + n_elem = 0; + if (qc->flags & ATA_QCFLAG_DMAMAP) + n_elem = ahci_fill_sg(qc, cmd_tbl); + + /* + * Fill in command slot information. + */ + opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12); + if (qc->tf.flags & ATA_TFLAG_WRITE) + opts |= AHCI_CMD_WRITE; + if (is_atapi) + opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; + + ahci_fill_cmd_slot(pp, qc->tag, opts); +} + +static void ahci_fbs_dec_intr(struct ata_port *ap) +{ + struct ahci_port_priv *pp = ap->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 fbs = readl(port_mmio + PORT_FBS); + int retries = 3; + + DPRINTK("ENTER\n"); + BUG_ON(!pp->fbs_enabled); + + /* time to wait for DEC is not specified by AHCI spec, + * add a retry loop for safety. + */ + writel(fbs | PORT_FBS_DEC, port_mmio + PORT_FBS); + fbs = readl(port_mmio + PORT_FBS); + while ((fbs & PORT_FBS_DEC) && retries--) { + udelay(1); + fbs = readl(port_mmio + PORT_FBS); + } + + if (fbs & PORT_FBS_DEC) + dev_err(ap->host->dev, "failed to clear device error\n"); +} + +static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + struct ata_eh_info *host_ehi = &ap->link.eh_info; + struct ata_link *link = NULL; + struct ata_queued_cmd *active_qc; + struct ata_eh_info *active_ehi; + bool fbs_need_dec = false; + u32 serror; + + /* determine active link with error */ + if (pp->fbs_enabled) { + void __iomem *port_mmio = ahci_port_base(ap); + u32 fbs = readl(port_mmio + PORT_FBS); + int pmp = fbs >> PORT_FBS_DWE_OFFSET; + + if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links)) { + link = &ap->pmp_link[pmp]; + fbs_need_dec = true; + } + + } else + ata_for_each_link(link, ap, EDGE) + if (ata_link_active(link)) + break; + + if (!link) + link = &ap->link; + + active_qc = ata_qc_from_tag(ap, link->active_tag); + active_ehi = &link->eh_info; + + /* record irq stat */ + ata_ehi_clear_desc(host_ehi); + ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat); + + /* AHCI needs SError cleared; otherwise, it might lock up */ + ahci_scr_read(&ap->link, SCR_ERROR, &serror); + ahci_scr_write(&ap->link, SCR_ERROR, serror); + host_ehi->serror |= serror; + + /* some controllers set IRQ_IF_ERR on device errors, ignore it */ + if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR) + irq_stat &= ~PORT_IRQ_IF_ERR; + + if (irq_stat & PORT_IRQ_TF_ERR) { + /* If qc is active, charge it; otherwise, the active + * link. There's no active qc on NCQ errors. It will + * be determined by EH by reading log page 10h. + */ + if (active_qc) + active_qc->err_mask |= AC_ERR_DEV; + else + active_ehi->err_mask |= AC_ERR_DEV; + + if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL) + host_ehi->serror &= ~SERR_INTERNAL; + } + + if (irq_stat & PORT_IRQ_UNK_FIS) { + u32 *unk = pp->rx_fis + RX_FIS_UNK; + + active_ehi->err_mask |= AC_ERR_HSM; + active_ehi->action |= ATA_EH_RESET; + ata_ehi_push_desc(active_ehi, + "unknown FIS %08x %08x %08x %08x" , + unk[0], unk[1], unk[2], unk[3]); + } + + if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) { + active_ehi->err_mask |= AC_ERR_HSM; + active_ehi->action |= ATA_EH_RESET; + ata_ehi_push_desc(active_ehi, "incorrect PMP"); + } + + if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) { + host_ehi->err_mask |= AC_ERR_HOST_BUS; + host_ehi->action |= ATA_EH_RESET; + ata_ehi_push_desc(host_ehi, "host bus error"); + } + + if (irq_stat & PORT_IRQ_IF_ERR) { + if (fbs_need_dec) + active_ehi->err_mask |= AC_ERR_DEV; + else { + host_ehi->err_mask |= AC_ERR_ATA_BUS; + host_ehi->action |= ATA_EH_RESET; + } + + ata_ehi_push_desc(host_ehi, "interface fatal error"); + } + + if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) { + ata_ehi_hotplugged(host_ehi); + ata_ehi_push_desc(host_ehi, "%s", + irq_stat & PORT_IRQ_CONNECT ? + "connection status changed" : "PHY RDY changed"); + } + + /* okay, let's hand over to EH */ + + if (irq_stat & PORT_IRQ_FREEZE) + ata_port_freeze(ap); + else if (fbs_need_dec) { + ata_link_abort(link); + ahci_fbs_dec_intr(ap); + } else + ata_port_abort(ap); +} + +static void ahci_handle_port_interrupt(struct ata_port *ap, + void __iomem *port_mmio, u32 status) +{ + struct ata_eh_info *ehi = &ap->link.eh_info; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; + int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING); + u32 qc_active = 0; + int rc; + + /* ignore BAD_PMP while resetting */ + if (unlikely(resetting)) + status &= ~PORT_IRQ_BAD_PMP; + + if (sata_lpm_ignore_phy_events(&ap->link)) { + status &= ~PORT_IRQ_PHYRDY; + ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG); + } + + if (unlikely(status & PORT_IRQ_ERROR)) { + ahci_error_intr(ap, status); + return; + } + + if (status & PORT_IRQ_SDB_FIS) { + /* If SNotification is available, leave notification + * handling to sata_async_notification(). If not, + * emulate it by snooping SDB FIS RX area. + * + * Snooping FIS RX area is probably cheaper than + * poking SNotification but some constrollers which + * implement SNotification, ICH9 for example, don't + * store AN SDB FIS into receive area. + */ + if (hpriv->cap & HOST_CAP_SNTF) + sata_async_notification(ap); + else { + /* If the 'N' bit in word 0 of the FIS is set, + * we just received asynchronous notification. + * Tell libata about it. + * + * Lack of SNotification should not appear in + * ahci 1.2, so the workaround is unnecessary + * when FBS is enabled. + */ + if (pp->fbs_enabled) + WARN_ON_ONCE(1); + else { + const __le32 *f = pp->rx_fis + RX_FIS_SDB; + u32 f0 = le32_to_cpu(f[0]); + if (f0 & (1 << 15)) + sata_async_notification(ap); + } + } + } + + /* pp->active_link is not reliable once FBS is enabled, both + * PORT_SCR_ACT and PORT_CMD_ISSUE should be checked because + * NCQ and non-NCQ commands may be in flight at the same time. + */ + if (pp->fbs_enabled) { + if (ap->qc_active) { + qc_active = readl(port_mmio + PORT_SCR_ACT); + qc_active |= readl(port_mmio + PORT_CMD_ISSUE); + } + } else { + /* pp->active_link is valid iff any command is in flight */ + if (ap->qc_active && pp->active_link->sactive) + qc_active = readl(port_mmio + PORT_SCR_ACT); + else + qc_active = readl(port_mmio + PORT_CMD_ISSUE); + } + + + rc = ata_qc_complete_multiple(ap, qc_active); + + /* while resetting, invalid completions are expected */ + if (unlikely(rc < 0 && !resetting)) { + ehi->err_mask |= AC_ERR_HSM; + ehi->action |= ATA_EH_RESET; + ata_port_freeze(ap); + } +} + +static void ahci_port_intr(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + u32 status; + + status = readl(port_mmio + PORT_IRQ_STAT); + writel(status, port_mmio + PORT_IRQ_STAT); + + ahci_handle_port_interrupt(ap, port_mmio, status); +} + +static irqreturn_t ahci_port_thread_fn(int irq, void *dev_instance) +{ + struct ata_port *ap = dev_instance; + struct ahci_port_priv *pp = ap->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 status; + + status = atomic_xchg(&pp->intr_status, 0); + if (!status) + return IRQ_NONE; + + spin_lock_bh(ap->lock); + ahci_handle_port_interrupt(ap, port_mmio, status); + spin_unlock_bh(ap->lock); + + return IRQ_HANDLED; +} + +static irqreturn_t ahci_multi_irqs_intr(int irq, void *dev_instance) +{ + struct ata_port *ap = dev_instance; + void __iomem *port_mmio = ahci_port_base(ap); + struct ahci_port_priv *pp = ap->private_data; + u32 status; + + VPRINTK("ENTER\n"); + + status = readl(port_mmio + PORT_IRQ_STAT); + writel(status, port_mmio + PORT_IRQ_STAT); + + atomic_or(status, &pp->intr_status); + + VPRINTK("EXIT\n"); + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t ahci_single_irq_intr(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + struct ahci_host_priv *hpriv; + unsigned int i, handled = 0; + void __iomem *mmio; + u32 irq_stat, irq_masked; + + VPRINTK("ENTER\n"); + + hpriv = host->private_data; + mmio = hpriv->mmio; + + /* sigh. 0xffffffff is a valid return from h/w */ + irq_stat = readl(mmio + HOST_IRQ_STAT); + if (!irq_stat) + return IRQ_NONE; + + irq_masked = irq_stat & hpriv->port_map; + + spin_lock(&host->lock); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap; + + if (!(irq_masked & (1 << i))) + continue; + + ap = host->ports[i]; + if (ap) { + ahci_port_intr(ap); + VPRINTK("port %u\n", i); + } else { + VPRINTK("port %u (no irq)\n", i); + if (ata_ratelimit()) + dev_warn(host->dev, + "interrupt on disabled port %u\n", i); + } + + handled = 1; + } + + /* HOST_IRQ_STAT behaves as level triggered latch meaning that + * it should be cleared after all the port events are cleared; + * otherwise, it will raise a spurious interrupt after each + * valid one. Please read section 10.6.2 of ahci 1.1 for more + * information. + * + * Also, use the unmasked value to clear interrupt as spurious + * pending event on a dummy port might cause screaming IRQ. + */ + writel(irq_stat, mmio + HOST_IRQ_STAT); + + spin_unlock(&host->lock); + + VPRINTK("EXIT\n"); + + return IRQ_RETVAL(handled); +} + +unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = ahci_port_base(ap); + struct ahci_port_priv *pp = ap->private_data; + + /* Keep track of the currently active link. It will be used + * in completion path to determine whether NCQ phase is in + * progress. + */ + pp->active_link = qc->dev->link; + + if (qc->tf.protocol == ATA_PROT_NCQ) + writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); + + if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) { + u32 fbs = readl(port_mmio + PORT_FBS); + fbs &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC); + fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET; + writel(fbs, port_mmio + PORT_FBS); + pp->fbs_last_dev = qc->dev->link->pmp; + } + + writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); + + ahci_sw_activity(qc->dev->link); + + return 0; +} +EXPORT_SYMBOL_GPL(ahci_qc_issue); + +static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc) +{ + struct ahci_port_priv *pp = qc->ap->private_data; + u8 *rx_fis = pp->rx_fis; + + if (pp->fbs_enabled) + rx_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ; + + /* + * After a successful execution of an ATA PIO data-in command, + * the device doesn't send D2H Reg FIS to update the TF and + * the host should take TF and E_Status from the preceding PIO + * Setup FIS. + */ + if (qc->tf.protocol == ATA_PROT_PIO && qc->dma_dir == DMA_FROM_DEVICE && + !(qc->flags & ATA_QCFLAG_FAILED)) { + ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf); + qc->result_tf.command = (rx_fis + RX_FIS_PIO_SETUP)[15]; + } else + ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf); + + return true; +} + +static void ahci_freeze(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + + /* turn IRQ off */ + writel(0, port_mmio + PORT_IRQ_MASK); +} + +static void ahci_thaw(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *mmio = hpriv->mmio; + void __iomem *port_mmio = ahci_port_base(ap); + u32 tmp; + struct ahci_port_priv *pp = ap->private_data; + + /* clear IRQ */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + writel(tmp, port_mmio + PORT_IRQ_STAT); + writel(1 << ap->port_no, mmio + HOST_IRQ_STAT); + + /* turn IRQ back on */ + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); +} + +void ahci_error_handler(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + + if (!(ap->pflags & ATA_PFLAG_FROZEN)) { + /* restart engine */ + ahci_stop_engine(ap); + hpriv->start_engine(ap); + } + + sata_pmp_error_handler(ap); + + if (!ata_dev_enabled(ap->link.device)) + ahci_stop_engine(ap); +} +EXPORT_SYMBOL_GPL(ahci_error_handler); + +static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* make DMA engine forget about the failed command */ + if (qc->flags & ATA_QCFLAG_FAILED) + ahci_kick_engine(ap); +} + +static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *ppriv = ap->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + struct ata_device *dev = ap->link.device; + u32 devslp, dm, dito, mdat, deto; + int rc; + unsigned int err_mask; + + devslp = readl(port_mmio + PORT_DEVSLP); + if (!(devslp & PORT_DEVSLP_DSP)) { + dev_info(ap->host->dev, "port does not support device sleep\n"); + return; + } + + /* disable device sleep */ + if (!sleep) { + if (devslp & PORT_DEVSLP_ADSE) { + writel(devslp & ~PORT_DEVSLP_ADSE, + port_mmio + PORT_DEVSLP); + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_DISABLE, + SATA_DEVSLP); + if (err_mask && err_mask != AC_ERR_DEV) + ata_dev_warn(dev, "failed to disable DEVSLP\n"); + } + return; + } + + /* device sleep was already enabled */ + if (devslp & PORT_DEVSLP_ADSE) + return; + + /* set DITO, MDAT, DETO and enable DevSlp, need to stop engine first */ + rc = ahci_stop_engine(ap); + if (rc) + return; + + if (ppriv->init_devslp) { + dito = ppriv->init_dito; + deto = ppriv->init_deto; + mdat = ppriv->init_mdat; + } else { + dm = (devslp & PORT_DEVSLP_DM_MASK) >> PORT_DEVSLP_DM_OFFSET; + dito = devslp_idle_timeout / (dm + 1); + if (dito > 0x3ff) + dito = 0x3ff; + + /* Use the nominal value 10 ms if the read MDAT is zero, + * the nominal value of DETO is 20 ms. + */ + if (dev->devslp_timing[ATA_LOG_DEVSLP_VALID] & + ATA_LOG_DEVSLP_VALID_MASK) { + mdat = dev->devslp_timing[ATA_LOG_DEVSLP_MDAT] & + ATA_LOG_DEVSLP_MDAT_MASK; + if (!mdat) + mdat = 10; + deto = dev->devslp_timing[ATA_LOG_DEVSLP_DETO]; + if (!deto) + deto = 20; + } else { + mdat = 10; + deto = 20; + } + } + + devslp |= ((dito << PORT_DEVSLP_DITO_OFFSET) | + (mdat << PORT_DEVSLP_MDAT_OFFSET) | + (deto << PORT_DEVSLP_DETO_OFFSET) | + PORT_DEVSLP_ADSE); + writel(devslp, port_mmio + PORT_DEVSLP); + + hpriv->start_engine(ap); + + /* enable device sleep feature for the drive */ + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_ENABLE, + SATA_DEVSLP); + if (err_mask && err_mask != AC_ERR_DEV) + ata_dev_warn(dev, "failed to enable DEVSLP\n"); +} + +static void ahci_enable_fbs(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 fbs; + int rc; + + if (!pp->fbs_supported) + return; + + fbs = readl(port_mmio + PORT_FBS); + if (fbs & PORT_FBS_EN) { + pp->fbs_enabled = true; + pp->fbs_last_dev = -1; /* initialization */ + return; + } + + rc = ahci_stop_engine(ap); + if (rc) + return; + + writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS); + fbs = readl(port_mmio + PORT_FBS); + if (fbs & PORT_FBS_EN) { + dev_info(ap->host->dev, "FBS is enabled\n"); + pp->fbs_enabled = true; + pp->fbs_last_dev = -1; /* initialization */ + } else + dev_err(ap->host->dev, "Failed to enable FBS\n"); + + hpriv->start_engine(ap); +} + +static void ahci_disable_fbs(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 fbs; + int rc; + + if (!pp->fbs_supported) + return; + + fbs = readl(port_mmio + PORT_FBS); + if ((fbs & PORT_FBS_EN) == 0) { + pp->fbs_enabled = false; + return; + } + + rc = ahci_stop_engine(ap); + if (rc) + return; + + writel(fbs & ~PORT_FBS_EN, port_mmio + PORT_FBS); + fbs = readl(port_mmio + PORT_FBS); + if (fbs & PORT_FBS_EN) + dev_err(ap->host->dev, "Failed to disable FBS\n"); + else { + dev_info(ap->host->dev, "FBS is disabled\n"); + pp->fbs_enabled = false; + } + + hpriv->start_engine(ap); +} + +static void ahci_pmp_attach(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + struct ahci_port_priv *pp = ap->private_data; + u32 cmd; + + cmd = readl(port_mmio + PORT_CMD); + cmd |= PORT_CMD_PMP; + writel(cmd, port_mmio + PORT_CMD); + + ahci_enable_fbs(ap); + + pp->intr_mask |= PORT_IRQ_BAD_PMP; + + /* + * We must not change the port interrupt mask register if the + * port is marked frozen, the value in pp->intr_mask will be + * restored later when the port is thawed. + * + * Note that during initialization, the port is marked as + * frozen since the irq handler is not yet registered. + */ + if (!(ap->pflags & ATA_PFLAG_FROZEN)) + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); +} + +static void ahci_pmp_detach(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + struct ahci_port_priv *pp = ap->private_data; + u32 cmd; + + ahci_disable_fbs(ap); + + cmd = readl(port_mmio + PORT_CMD); + cmd &= ~PORT_CMD_PMP; + writel(cmd, port_mmio + PORT_CMD); + + pp->intr_mask &= ~PORT_IRQ_BAD_PMP; + + /* see comment above in ahci_pmp_attach() */ + if (!(ap->pflags & ATA_PFLAG_FROZEN)) + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); +} + +int ahci_port_resume(struct ata_port *ap) +{ + ahci_power_up(ap); + ahci_start_port(ap); + + if (sata_pmp_attached(ap)) + ahci_pmp_attach(ap); + else + ahci_pmp_detach(ap); + + return 0; +} +EXPORT_SYMBOL_GPL(ahci_port_resume); + +#ifdef CONFIG_PM +static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) +{ + const char *emsg = NULL; + int rc; + + rc = ahci_deinit_port(ap, &emsg); + if (rc == 0) + ahci_power_down(ap); + else { + ata_port_err(ap, "%s (%d)\n", emsg, rc); + ata_port_freeze(ap); + } + + return rc; +} +#endif + +/* + * Allocate port privdata and read back initial power management configuration + */ +int ahci_setup_port_privdata(struct ata_port *ap) +{ + struct ahci_port_priv *pp; + u32 cmd, devslp; + void __iomem *port_mmio = ahci_port_base(ap); + + pp = kzalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + + ap->private_data = pp; + + cmd = readl(port_mmio + PORT_CMD); + + if (cmd & PORT_CMD_ALPE) + pp->init_alpe = true; + + if (cmd & PORT_CMD_ASP) + pp->init_asp = true; + + devslp = readl(port_mmio + PORT_DEVSLP); + + /* devslp unsupported or disabled */ + if (!(devslp & PORT_DEVSLP_DSP) || !(devslp & PORT_DEVSLP_ADSE)) + return 0; + + pp->init_devslp = true; + pp->init_dito = (devslp >> PORT_DEVSLP_DITO_OFFSET) & 0x3ff; + pp->init_deto = (devslp >> PORT_DEVSLP_DETO_OFFSET) & 0xff; + pp->init_mdat = (devslp >> PORT_DEVSLP_MDAT_OFFSET) & 0x1f; + + return 0; +} +EXPORT_SYMBOL_GPL(ahci_setup_port_privdata); + +static int ahci_port_start(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + struct device *dev = ap->host->dev; + void *mem; + dma_addr_t mem_dma; + size_t dma_sz, rx_fis_sz; + + if (ap->host->n_ports > 1) { + pp->irq_desc = devm_kzalloc(dev, 8, GFP_KERNEL); + if (!pp->irq_desc) { + devm_kfree(dev, pp); + return -ENOMEM; + } + snprintf(pp->irq_desc, 8, + "%s%d", dev_driver_string(dev), ap->port_no); + } + + /* check FBS capability */ + if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) { + void __iomem *port_mmio = ahci_port_base(ap); + u32 cmd = readl(port_mmio + PORT_CMD); + if (cmd & PORT_CMD_FBSCP) + pp->fbs_supported = true; + else if (hpriv->flags & AHCI_HFLAG_YES_FBS) { + dev_info(dev, "port %d can do FBS, forcing FBSCP\n", + ap->port_no); + pp->fbs_supported = true; + } else + dev_warn(dev, "port %d is not capable of FBS\n", + ap->port_no); + } + + if (pp->fbs_supported) { + dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ; + rx_fis_sz = AHCI_RX_FIS_SZ * 16; + } else { + dma_sz = AHCI_PORT_PRIV_DMA_SZ; + rx_fis_sz = AHCI_RX_FIS_SZ; + } + + mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL); + if (!mem) + return -ENOMEM; + memset(mem, 0, dma_sz); + + /* + * First item in chunk of DMA memory: 32-slot command table, + * 32 bytes each in size + */ + pp->cmd_slot = mem; + pp->cmd_slot_dma = mem_dma; + + mem += AHCI_CMD_SLOT_SZ; + mem_dma += AHCI_CMD_SLOT_SZ; + + /* + * Second item: Received-FIS area + */ + pp->rx_fis = mem; + pp->rx_fis_dma = mem_dma; + + mem += rx_fis_sz; + mem_dma += rx_fis_sz; + + /* + * Third item: data area for storing a single command + * and its scatter-gather table + */ + pp->cmd_tbl = mem; + pp->cmd_tbl_dma = mem_dma; + + /* + * Save off initial list of interrupts to be enabled. + * This could be changed later + */ + pp->intr_mask = DEF_PORT_IRQ; + + /* + * Switch to per-port locking in case each port has its own MSI vector. + */ + if ((hpriv->flags & AHCI_HFLAG_MULTI_MSI)) { + spin_lock_init(&pp->lock); + ap->lock = &pp->lock; + } + + /* engage engines, captain */ + return ahci_port_resume(ap); +} + +static void ahci_port_stop(struct ata_port *ap) +{ + const char *emsg = NULL; + int rc; + + /* de-initialize port */ + rc = ahci_deinit_port(ap, &emsg); + if (rc) + ata_port_warn(ap, "%s (%d)\n", emsg, rc); +} + +void ahci_print_info(struct ata_host *host, const char *scc_s) +{ + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->mmio; + u32 vers, cap, cap2, impl, speed; + const char *speed_s; + + vers = readl(mmio + HOST_VERSION); + cap = hpriv->cap; + cap2 = hpriv->cap2; + impl = hpriv->port_map; + + speed = (cap >> 20) & 0xf; + if (speed == 1) + speed_s = "1.5"; + else if (speed == 2) + speed_s = "3"; + else if (speed == 3) + speed_s = "6"; + else + speed_s = "?"; + + dev_info(host->dev, + "AHCI %02x%02x.%02x%02x " + "%u slots %u ports %s Gbps 0x%x impl %s mode\n" + , + + (vers >> 24) & 0xff, + (vers >> 16) & 0xff, + (vers >> 8) & 0xff, + vers & 0xff, + + ((cap >> 8) & 0x1f) + 1, + (cap & 0x1f) + 1, + speed_s, + impl, + scc_s); + + dev_info(host->dev, + "flags: " + "%s%s%s%s%s%s%s" + "%s%s%s%s%s%s%s" + "%s%s%s%s%s%s%s" + "%s%s\n" + , + + cap & HOST_CAP_64 ? "64bit " : "", + cap & HOST_CAP_NCQ ? "ncq " : "", + cap & HOST_CAP_SNTF ? "sntf " : "", + cap & HOST_CAP_MPS ? "ilck " : "", + cap & HOST_CAP_SSS ? "stag " : "", + cap & HOST_CAP_ALPM ? "pm " : "", + cap & HOST_CAP_LED ? "led " : "", + cap & HOST_CAP_CLO ? "clo " : "", + cap & HOST_CAP_ONLY ? "only " : "", + cap & HOST_CAP_PMP ? "pmp " : "", + cap & HOST_CAP_FBS ? "fbs " : "", + cap & HOST_CAP_PIO_MULTI ? "pio " : "", + cap & HOST_CAP_SSC ? "slum " : "", + cap & HOST_CAP_PART ? "part " : "", + cap & HOST_CAP_CCC ? "ccc " : "", + cap & HOST_CAP_EMS ? "ems " : "", + cap & HOST_CAP_SXS ? "sxs " : "", + cap2 & HOST_CAP2_DESO ? "deso " : "", + cap2 & HOST_CAP2_SADM ? "sadm " : "", + cap2 & HOST_CAP2_SDS ? "sds " : "", + cap2 & HOST_CAP2_APST ? "apst " : "", + cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "", + cap2 & HOST_CAP2_BOH ? "boh " : "" + ); +} +EXPORT_SYMBOL_GPL(ahci_print_info); + +void ahci_set_em_messages(struct ahci_host_priv *hpriv, + struct ata_port_info *pi) +{ + u8 messages; + void __iomem *mmio = hpriv->mmio; + u32 em_loc = readl(mmio + HOST_EM_LOC); + u32 em_ctl = readl(mmio + HOST_EM_CTL); + + if (!ahci_em_messages || !(hpriv->cap & HOST_CAP_EMS)) + return; + + messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16; + + if (messages) { + /* store em_loc */ + hpriv->em_loc = ((em_loc >> 16) * 4); + hpriv->em_buf_sz = ((em_loc & 0xff) * 4); + hpriv->em_msg_type = messages; + pi->flags |= ATA_FLAG_EM; + if (!(em_ctl & EM_CTL_ALHD)) + pi->flags |= ATA_FLAG_SW_ACTIVITY; + } +} +EXPORT_SYMBOL_GPL(ahci_set_em_messages); + +static int ahci_host_activate_multi_irqs(struct ata_host *host, int irq, + struct scsi_host_template *sht) +{ + int i, rc; + + rc = ata_host_start(host); + if (rc) + return rc; + + for (i = 0; i < host->n_ports; i++) { + struct ahci_port_priv *pp = host->ports[i]->private_data; + + /* Do not receive interrupts sent by dummy ports */ + if (!pp) { + disable_irq(irq + i); + continue; + } + + rc = devm_request_threaded_irq(host->dev, irq + i, + ahci_multi_irqs_intr, + ahci_port_thread_fn, IRQF_SHARED, + pp->irq_desc, host->ports[i]); + if (rc) + goto out_free_irqs; + } + + for (i = 0; i < host->n_ports; i++) + ata_port_desc(host->ports[i], "irq %d", irq + i); + + rc = ata_host_register(host, sht); + if (rc) + goto out_free_all_irqs; + + return 0; + +out_free_all_irqs: + i = host->n_ports; +out_free_irqs: + for (i--; i >= 0; i--) + devm_free_irq(host->dev, irq + i, host->ports[i]); + + return rc; +} + +/** + * ahci_host_activate - start AHCI host, request IRQs and register it + * @host: target ATA host + * @irq: base IRQ number to request + * @sht: scsi_host_template to use when registering the host + * + * Similar to ata_host_activate, but requests IRQs according to AHCI-1.1 + * when multiple MSIs were allocated. That is one MSI per port, starting + * from @irq. + * + * LOCKING: + * Inherited from calling layer (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ahci_host_activate(struct ata_host *host, int irq, + struct scsi_host_template *sht) +{ + struct ahci_host_priv *hpriv = host->private_data; + int rc; + + if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) + rc = ahci_host_activate_multi_irqs(host, irq, sht); + else + rc = ata_host_activate(host, irq, ahci_single_irq_intr, + IRQF_SHARED, sht); + return rc; +} +EXPORT_SYMBOL_GPL(ahci_host_activate); + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("Common AHCI SATA low-level routines"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c new file mode 100644 index 000000000..39946d43f --- /dev/null +++ b/drivers/ata/libahci_platform.c @@ -0,0 +1,741 @@ +/* + * AHCI SATA platform library + * + * Copyright 2004-2005 Red Hat, Inc. + * Jeff Garzik + * Copyright 2010 MontaVista Software, LLC. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ahci.h" + +static void ahci_host_stop(struct ata_host *host); + +struct ata_port_operations ahci_platform_ops = { + .inherits = &ahci_ops, + .host_stop = ahci_host_stop, +}; +EXPORT_SYMBOL_GPL(ahci_platform_ops); + +/** + * ahci_platform_enable_phys - Enable PHYs + * @hpriv: host private area to store config values + * + * This function enables all the PHYs found in hpriv->phys, if any. + * If a PHY fails to be enabled, it disables all the PHYs already + * enabled in reverse order and returns an error. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +static int ahci_platform_enable_phys(struct ahci_host_priv *hpriv) +{ + int rc, i; + + for (i = 0; i < hpriv->nports; i++) { + rc = phy_init(hpriv->phys[i]); + if (rc) + goto disable_phys; + + rc = phy_power_on(hpriv->phys[i]); + if (rc) { + phy_exit(hpriv->phys[i]); + goto disable_phys; + } + } + + return 0; + +disable_phys: + while (--i >= 0) { + phy_power_off(hpriv->phys[i]); + phy_exit(hpriv->phys[i]); + } + return rc; +} + +/** + * ahci_platform_disable_phys - Disable PHYs + * @hpriv: host private area to store config values + * + * This function disables all PHYs found in hpriv->phys. + */ +static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv) +{ + int i; + + for (i = 0; i < hpriv->nports; i++) { + phy_power_off(hpriv->phys[i]); + phy_exit(hpriv->phys[i]); + } +} + +/** + * ahci_platform_enable_clks - Enable platform clocks + * @hpriv: host private area to store config values + * + * This function enables all the clks found in hpriv->clks, starting at + * index 0. If any clk fails to enable it disables all the clks already + * enabled in reverse order, and then returns an error. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_enable_clks(struct ahci_host_priv *hpriv) +{ + int c, rc; + + for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) { + rc = clk_prepare_enable(hpriv->clks[c]); + if (rc) + goto disable_unprepare_clk; + } + return 0; + +disable_unprepare_clk: + while (--c >= 0) + clk_disable_unprepare(hpriv->clks[c]); + return rc; +} +EXPORT_SYMBOL_GPL(ahci_platform_enable_clks); + +/** + * ahci_platform_disable_clks - Disable platform clocks + * @hpriv: host private area to store config values + * + * This function disables all the clks found in hpriv->clks, in reverse + * order of ahci_platform_enable_clks (starting at the end of the array). + */ +void ahci_platform_disable_clks(struct ahci_host_priv *hpriv) +{ + int c; + + for (c = AHCI_MAX_CLKS - 1; c >= 0; c--) + if (hpriv->clks[c]) + clk_disable_unprepare(hpriv->clks[c]); +} +EXPORT_SYMBOL_GPL(ahci_platform_disable_clks); + +/** + * ahci_platform_enable_regulators - Enable regulators + * @hpriv: host private area to store config values + * + * This function enables all the regulators found in + * hpriv->target_pwrs, if any. If a regulator fails to be enabled, it + * disables all the regulators already enabled in reverse order and + * returns an error. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv) +{ + int rc, i; + + for (i = 0; i < hpriv->nports; i++) { + if (!hpriv->target_pwrs[i]) + continue; + + rc = regulator_enable(hpriv->target_pwrs[i]); + if (rc) + goto disable_target_pwrs; + } + + return 0; + +disable_target_pwrs: + while (--i >= 0) + if (hpriv->target_pwrs[i]) + regulator_disable(hpriv->target_pwrs[i]); + + return rc; +} +EXPORT_SYMBOL_GPL(ahci_platform_enable_regulators); + +/** + * ahci_platform_disable_regulators - Disable regulators + * @hpriv: host private area to store config values + * + * This function disables all regulators found in hpriv->target_pwrs. + */ +void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv) +{ + int i; + + for (i = 0; i < hpriv->nports; i++) { + if (!hpriv->target_pwrs[i]) + continue; + regulator_disable(hpriv->target_pwrs[i]); + } +} +EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators); +/** + * ahci_platform_enable_resources - Enable platform resources + * @hpriv: host private area to store config values + * + * This function enables all ahci_platform managed resources in the + * following order: + * 1) Regulator + * 2) Clocks (through ahci_platform_enable_clks) + * 3) Phys + * + * If resource enabling fails at any point the previous enabled resources + * are disabled in reverse order. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_enable_resources(struct ahci_host_priv *hpriv) +{ + int rc; + + rc = ahci_platform_enable_regulators(hpriv); + if (rc) + return rc; + + rc = ahci_platform_enable_clks(hpriv); + if (rc) + goto disable_regulator; + + rc = ahci_platform_enable_phys(hpriv); + if (rc) + goto disable_clks; + + return 0; + +disable_clks: + ahci_platform_disable_clks(hpriv); + +disable_regulator: + ahci_platform_disable_regulators(hpriv); + + return rc; +} +EXPORT_SYMBOL_GPL(ahci_platform_enable_resources); + +/** + * ahci_platform_disable_resources - Disable platform resources + * @hpriv: host private area to store config values + * + * This function disables all ahci_platform managed resources in the + * following order: + * 1) Phys + * 2) Clocks (through ahci_platform_disable_clks) + * 3) Regulator + */ +void ahci_platform_disable_resources(struct ahci_host_priv *hpriv) +{ + ahci_platform_disable_phys(hpriv); + + ahci_platform_disable_clks(hpriv); + + ahci_platform_disable_regulators(hpriv); +} +EXPORT_SYMBOL_GPL(ahci_platform_disable_resources); + +static void ahci_platform_put_resources(struct device *dev, void *res) +{ + struct ahci_host_priv *hpriv = res; + int c; + + if (hpriv->got_runtime_pm) { + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); + } + + for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) + clk_put(hpriv->clks[c]); + /* + * The regulators are tied to child node device and not to the + * SATA device itself. So we can't use devm for automatically + * releasing them. We have to do it manually here. + */ + for (c = 0; c < hpriv->nports; c++) + if (hpriv->target_pwrs && hpriv->target_pwrs[c]) + regulator_put(hpriv->target_pwrs[c]); + + kfree(hpriv->target_pwrs); +} + +static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port, + struct device *dev, struct device_node *node) +{ + int rc; + + hpriv->phys[port] = devm_of_phy_get(dev, node, NULL); + + if (!IS_ERR(hpriv->phys[port])) + return 0; + + rc = PTR_ERR(hpriv->phys[port]); + switch (rc) { + case -ENOSYS: + /* No PHY support. Check if PHY is required. */ + if (of_find_property(node, "phys", NULL)) { + dev_err(dev, + "couldn't get PHY in node %s: ENOSYS\n", + node->name); + break; + } + case -ENODEV: + /* continue normally */ + hpriv->phys[port] = NULL; + rc = 0; + break; + + default: + dev_err(dev, + "couldn't get PHY in node %s: %d\n", + node->name, rc); + + break; + } + + return rc; +} + +static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port, + struct device *dev) +{ + struct regulator *target_pwr; + int rc = 0; + + target_pwr = regulator_get_optional(dev, "target"); + + if (!IS_ERR(target_pwr)) + hpriv->target_pwrs[port] = target_pwr; + else + rc = PTR_ERR(target_pwr); + + return rc; +} + +/** + * ahci_platform_get_resources - Get platform resources + * @pdev: platform device to get resources for + * + * This function allocates an ahci_host_priv struct, and gets the following + * resources, storing a reference to them inside the returned struct: + * + * 1) mmio registers (IORESOURCE_MEM 0, mandatory) + * 2) regulator for controlling the targets power (optional) + * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node, + * or for non devicetree enabled platforms a single clock + * 4) phys (optional) + * + * RETURNS: + * The allocated ahci_host_priv on success, otherwise an ERR_PTR value + */ +struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + struct clk *clk; + struct device_node *child; + int i, sz, enabled_ports = 0, rc = -ENOMEM, child_nodes; + u32 mask_port_map = 0; + + if (!devres_open_group(dev, NULL, GFP_KERNEL)) + return ERR_PTR(-ENOMEM); + + hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv), + GFP_KERNEL); + if (!hpriv) + goto err_out; + + devres_add(dev, hpriv); + + hpriv->mmio = devm_ioremap_resource(dev, + platform_get_resource(pdev, IORESOURCE_MEM, 0)); + if (IS_ERR(hpriv->mmio)) { + dev_err(dev, "no mmio space\n"); + rc = PTR_ERR(hpriv->mmio); + goto err_out; + } + + for (i = 0; i < AHCI_MAX_CLKS; i++) { + /* + * For now we must use clk_get(dev, NULL) for the first clock, + * because some platforms (da850, spear13xx) are not yet + * converted to use devicetree for clocks. For new platforms + * this is equivalent to of_clk_get(dev->of_node, 0). + */ + if (i == 0) + clk = clk_get(dev, NULL); + else + clk = of_clk_get(dev->of_node, i); + + if (IS_ERR(clk)) { + rc = PTR_ERR(clk); + if (rc == -EPROBE_DEFER) + goto err_out; + break; + } + hpriv->clks[i] = clk; + } + + hpriv->nports = child_nodes = of_get_child_count(dev->of_node); + + /* + * If no sub-node was found, we still need to set nports to + * one in order to be able to use the + * ahci_platform_[en|dis]able_[phys|regulators] functions. + */ + if (!child_nodes) + hpriv->nports = 1; + + sz = hpriv->nports * sizeof(*hpriv->phys); + hpriv->phys = devm_kzalloc(dev, sz, GFP_KERNEL); + if (!hpriv->phys) { + rc = -ENOMEM; + goto err_out; + } + sz = hpriv->nports * sizeof(*hpriv->target_pwrs); + hpriv->target_pwrs = kzalloc(sz, GFP_KERNEL); + if (!hpriv->target_pwrs) { + rc = -ENOMEM; + goto err_out; + } + + if (child_nodes) { + for_each_child_of_node(dev->of_node, child) { + u32 port; + struct platform_device *port_dev __maybe_unused; + + if (!of_device_is_available(child)) + continue; + + if (of_property_read_u32(child, "reg", &port)) { + rc = -EINVAL; + goto err_out; + } + + if (port >= hpriv->nports) { + dev_warn(dev, "invalid port number %d\n", port); + continue; + } + mask_port_map |= BIT(port); + +#ifdef CONFIG_OF_ADDRESS + of_platform_device_create(child, NULL, NULL); + + port_dev = of_find_device_by_node(child); + + if (port_dev) { + rc = ahci_platform_get_regulator(hpriv, port, + &port_dev->dev); + if (rc == -EPROBE_DEFER) + goto err_out; + } +#endif + + rc = ahci_platform_get_phy(hpriv, port, dev, child); + if (rc) + goto err_out; + + enabled_ports++; + } + if (!enabled_ports) { + dev_warn(dev, "No port enabled\n"); + rc = -ENODEV; + goto err_out; + } + + if (!hpriv->mask_port_map) + hpriv->mask_port_map = mask_port_map; + } else { + /* + * If no sub-node was found, keep this for device tree + * compatibility + */ + rc = ahci_platform_get_phy(hpriv, 0, dev, dev->of_node); + if (rc) + goto err_out; + + rc = ahci_platform_get_regulator(hpriv, 0, dev); + if (rc == -EPROBE_DEFER) + goto err_out; + } + pm_runtime_enable(dev); + pm_runtime_get_sync(dev); + hpriv->got_runtime_pm = true; + + devres_remove_group(dev, NULL); + return hpriv; + +err_out: + devres_release_group(dev, NULL); + return ERR_PTR(rc); +} +EXPORT_SYMBOL_GPL(ahci_platform_get_resources); + +/** + * ahci_platform_init_host - Bring up an ahci-platform host + * @pdev: platform device pointer for the host + * @hpriv: ahci-host private data for the host + * @pi_template: template for the ata_port_info to use + * @sht: scsi_host_template to use when registering + * + * This function does all the usual steps needed to bring up an + * ahci-platform host, note any necessary resources (ie clks, phys, etc.) + * must be initialized / enabled before calling this. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_init_host(struct platform_device *pdev, + struct ahci_host_priv *hpriv, + const struct ata_port_info *pi_template, + struct scsi_host_template *sht) +{ + struct device *dev = &pdev->dev; + struct ata_port_info pi = *pi_template; + const struct ata_port_info *ppi[] = { &pi, NULL }; + struct ata_host *host; + int i, irq, n_ports, rc; + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(dev, "no irq\n"); + return -EINVAL; + } + + /* prepare host */ + pi.private_data = (void *)(unsigned long)hpriv->flags; + + ahci_save_initial_config(dev, hpriv); + + if (hpriv->cap & HOST_CAP_NCQ) + pi.flags |= ATA_FLAG_NCQ; + + if (hpriv->cap & HOST_CAP_PMP) + pi.flags |= ATA_FLAG_PMP; + + ahci_set_em_messages(hpriv, &pi); + + /* CAP.NP sometimes indicate the index of the last enabled + * port, at other times, that of the last possible port, so + * determining the maximum port number requires looking at + * both CAP.NP and port_map. + */ + n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); + + host = ata_host_alloc_pinfo(dev, ppi, n_ports); + if (!host) + return -ENOMEM; + + host->private_data = hpriv; + + if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) + host->flags |= ATA_HOST_PARALLEL_SCAN; + else + dev_info(dev, "SSS flag set, parallel bus scan disabled\n"); + + if (pi.flags & ATA_FLAG_EM) + ahci_reset_em(host); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + ata_port_desc(ap, "mmio %pR", + platform_get_resource(pdev, IORESOURCE_MEM, 0)); + ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); + + /* set enclosure management message type */ + if (ap->flags & ATA_FLAG_EM) + ap->em_message_type = hpriv->em_msg_type; + + rc = ahci_setup_port_privdata(ap); + if (rc) + return rc; + + /* disabled/not-implemented port */ + if (!(hpriv->port_map & (1 << i))) + ap->ops = &ata_dummy_port_ops; + } + + if (hpriv->cap & HOST_CAP_64) { + rc = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(64)); + if (rc) { + rc = dma_coerce_mask_and_coherent(dev, + DMA_BIT_MASK(32)); + if (rc) { + dev_err(dev, "Failed to enable 64-bit DMA.\n"); + return rc; + } + dev_warn(dev, "Enable 32-bit DMA instead of 64-bit.\n"); + } + } + + rc = ahci_reset_controller(host); + if (rc) + return rc; + + ahci_init_controller(host); + ahci_print_info(host, "platform"); + + return ahci_host_activate(host, irq, sht); +} +EXPORT_SYMBOL_GPL(ahci_platform_init_host); + +static void ahci_host_stop(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; + + ahci_platform_disable_resources(hpriv); +} + +#ifdef CONFIG_PM_SLEEP +/** + * ahci_platform_suspend_host - Suspend an ahci-platform host + * @dev: device pointer for the host + * + * This function does all the usual steps needed to suspend an + * ahci-platform host, note any necessary resources (ie clks, phys, etc.) + * must be disabled after calling this. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_suspend_host(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->mmio; + u32 ctl; + + if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { + dev_err(dev, "firmware update required for suspend/resume\n"); + return -EIO; + } + + /* + * AHCI spec rev1.1 section 8.3.3: + * Software must disable interrupts prior to requesting a + * transition of the HBA to D3 state. + */ + ctl = readl(mmio + HOST_CTL); + ctl &= ~HOST_IRQ_EN; + writel(ctl, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + + return ata_host_suspend(host, PMSG_SUSPEND); +} +EXPORT_SYMBOL_GPL(ahci_platform_suspend_host); + +/** + * ahci_platform_resume_host - Resume an ahci-platform host + * @dev: device pointer for the host + * + * This function does all the usual steps needed to resume an ahci-platform + * host, note any necessary resources (ie clks, phys, etc.) must be + * initialized / enabled before calling this. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_resume_host(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + int rc; + + if (dev->power.power_state.event == PM_EVENT_SUSPEND) { + rc = ahci_reset_controller(host); + if (rc) + return rc; + + ahci_init_controller(host); + } + + ata_host_resume(host); + + return 0; +} +EXPORT_SYMBOL_GPL(ahci_platform_resume_host); + +/** + * ahci_platform_suspend - Suspend an ahci-platform device + * @dev: the platform device to suspend + * + * This function suspends the host associated with the device, followed by + * disabling all the resources of the device. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_suspend(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + int rc; + + rc = ahci_platform_suspend_host(dev); + if (rc) + return rc; + + ahci_platform_disable_resources(hpriv); + + return 0; +} +EXPORT_SYMBOL_GPL(ahci_platform_suspend); + +/** + * ahci_platform_resume - Resume an ahci-platform device + * @dev: the platform device to resume + * + * This function enables all the resources of the device followed by + * resuming the host associated with the device. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_resume(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + int rc; + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + rc = ahci_platform_resume_host(dev); + if (rc) + goto disable_resources; + + /* We resumed so update PM runtime state */ + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; + +disable_resources: + ahci_platform_disable_resources(hpriv); + + return rc; +} +EXPORT_SYMBOL_GPL(ahci_platform_resume); +#endif + +MODULE_DESCRIPTION("AHCI SATA platform library"); +MODULE_AUTHOR("Anton Vorontsov "); +MODULE_LICENSE("GPL"); diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c new file mode 100644 index 000000000..97a14fe47 --- /dev/null +++ b/drivers/ata/libata-acpi.c @@ -0,0 +1,1054 @@ +/* + * libata-acpi.c + * Provides ACPI support for PATA/SATA. + * + * Copyright (C) 2006 Intel Corp. + * Copyright (C) 2006 Randy Dunlap + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "libata.h" + +unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT; +module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644); +MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM, 0x8=FPDMA non-zero offset, 0x10=FPDMA DMA Setup FIS auto-activate)"); + +#define NO_PORT_MULT 0xffff +#define SATA_ADR(root, pmp) (((root) << 16) | (pmp)) + +#define REGS_PER_GTF 7 +struct ata_acpi_gtf { + u8 tf[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */ +} __packed; + +static void ata_acpi_clear_gtf(struct ata_device *dev) +{ + kfree(dev->gtf_cache); + dev->gtf_cache = NULL; +} + +struct ata_acpi_hotplug_context { + struct acpi_hotplug_context hp; + union { + struct ata_port *ap; + struct ata_device *dev; + } data; +}; + +#define ata_hotplug_data(context) (container_of((context), struct ata_acpi_hotplug_context, hp)->data) + +/** + * ata_dev_acpi_handle - provide the acpi_handle for an ata_device + * @dev: the acpi_handle returned will correspond to this device + * + * Returns the acpi_handle for the ACPI namespace object corresponding to + * the ata_device passed into the function, or NULL if no such object exists + * or ACPI is disabled for this device due to consecutive errors. + */ +acpi_handle ata_dev_acpi_handle(struct ata_device *dev) +{ + return dev->flags & ATA_DFLAG_ACPI_DISABLED ? + NULL : ACPI_HANDLE(&dev->tdev); +} + +/* @ap and @dev are the same as ata_acpi_handle_hotplug() */ +static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev) +{ + if (dev) + dev->flags |= ATA_DFLAG_DETACH; + else { + struct ata_link *tlink; + struct ata_device *tdev; + + ata_for_each_link(tlink, ap, EDGE) + ata_for_each_dev(tdev, tlink, ALL) + tdev->flags |= ATA_DFLAG_DETACH; + } + + ata_port_schedule_eh(ap); +} + +/** + * ata_acpi_handle_hotplug - ACPI event handler backend + * @ap: ATA port ACPI event occurred + * @dev: ATA device ACPI event occurred (can be NULL) + * @event: ACPI event which occurred + * + * All ACPI bay / device realted events end up in this function. If + * the event is port-wide @dev is NULL. If the event is specific to a + * device, @dev points to it. + * + * Hotplug (as opposed to unplug) notification is always handled as + * port-wide while unplug only kills the target device on device-wide + * event. + * + * LOCKING: + * ACPI notify handler context. May sleep. + */ +static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev, + u32 event) +{ + struct ata_eh_info *ehi = &ap->link.eh_info; + int wait = 0; + unsigned long flags; + + spin_lock_irqsave(ap->lock, flags); + /* + * When dock driver calls into the routine, it will always use + * ACPI_NOTIFY_BUS_CHECK/ACPI_NOTIFY_DEVICE_CHECK for add and + * ACPI_NOTIFY_EJECT_REQUEST for remove + */ + switch (event) { + case ACPI_NOTIFY_BUS_CHECK: + case ACPI_NOTIFY_DEVICE_CHECK: + ata_ehi_push_desc(ehi, "ACPI event"); + + ata_ehi_hotplugged(ehi); + ata_port_freeze(ap); + break; + case ACPI_NOTIFY_EJECT_REQUEST: + ata_ehi_push_desc(ehi, "ACPI event"); + + ata_acpi_detach_device(ap, dev); + wait = 1; + break; + } + + spin_unlock_irqrestore(ap->lock, flags); + + if (wait) + ata_port_wait_eh(ap); +} + +static int ata_acpi_dev_notify_dock(struct acpi_device *adev, u32 event) +{ + struct ata_device *dev = ata_hotplug_data(adev->hp).dev; + ata_acpi_handle_hotplug(dev->link->ap, dev, event); + return 0; +} + +static int ata_acpi_ap_notify_dock(struct acpi_device *adev, u32 event) +{ + ata_acpi_handle_hotplug(ata_hotplug_data(adev->hp).ap, NULL, event); + return 0; +} + +static void ata_acpi_uevent(struct ata_port *ap, struct ata_device *dev, + u32 event) +{ + struct kobject *kobj = NULL; + char event_string[20]; + char *envp[] = { event_string, NULL }; + + if (dev) { + if (dev->sdev) + kobj = &dev->sdev->sdev_gendev.kobj; + } else + kobj = &ap->dev->kobj; + + if (kobj) { + snprintf(event_string, 20, "BAY_EVENT=%d", event); + kobject_uevent_env(kobj, KOBJ_CHANGE, envp); + } +} + +static void ata_acpi_ap_uevent(struct acpi_device *adev, u32 event) +{ + ata_acpi_uevent(ata_hotplug_data(adev->hp).ap, NULL, event); +} + +static void ata_acpi_dev_uevent(struct acpi_device *adev, u32 event) +{ + struct ata_device *dev = ata_hotplug_data(adev->hp).dev; + ata_acpi_uevent(dev->link->ap, dev, event); +} + +/* bind acpi handle to pata port */ +void ata_acpi_bind_port(struct ata_port *ap) +{ + struct acpi_device *host_companion = ACPI_COMPANION(ap->host->dev); + struct acpi_device *adev; + struct ata_acpi_hotplug_context *context; + + if (libata_noacpi || ap->flags & ATA_FLAG_ACPI_SATA || !host_companion) + return; + + acpi_preset_companion(&ap->tdev, host_companion, ap->port_no); + + if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0) + ap->pflags |= ATA_PFLAG_INIT_GTM_VALID; + + adev = ACPI_COMPANION(&ap->tdev); + if (!adev || adev->hp) + return; + + context = kzalloc(sizeof(*context), GFP_KERNEL); + if (!context) + return; + + context->data.ap = ap; + acpi_initialize_hp_context(adev, &context->hp, ata_acpi_ap_notify_dock, + ata_acpi_ap_uevent); +} + +void ata_acpi_bind_dev(struct ata_device *dev) +{ + struct ata_port *ap = dev->link->ap; + struct acpi_device *port_companion = ACPI_COMPANION(&ap->tdev); + struct acpi_device *host_companion = ACPI_COMPANION(ap->host->dev); + struct acpi_device *parent, *adev; + struct ata_acpi_hotplug_context *context; + u64 adr; + + /* + * For both sata/pata devices, host companion device is required. + * For pata device, port companion device is also required. + */ + if (libata_noacpi || !host_companion || + (!(ap->flags & ATA_FLAG_ACPI_SATA) && !port_companion)) + return; + + if (ap->flags & ATA_FLAG_ACPI_SATA) { + if (!sata_pmp_attached(ap)) + adr = SATA_ADR(ap->port_no, NO_PORT_MULT); + else + adr = SATA_ADR(ap->port_no, dev->link->pmp); + parent = host_companion; + } else { + adr = dev->devno; + parent = port_companion; + } + + acpi_preset_companion(&dev->tdev, parent, adr); + adev = ACPI_COMPANION(&dev->tdev); + if (!adev || adev->hp) + return; + + context = kzalloc(sizeof(*context), GFP_KERNEL); + if (!context) + return; + + context->data.dev = dev; + acpi_initialize_hp_context(adev, &context->hp, ata_acpi_dev_notify_dock, + ata_acpi_dev_uevent); +} + +/** + * ata_acpi_dissociate - dissociate ATA host from ACPI objects + * @host: target ATA host + * + * This function is called during driver detach after the whole host + * is shut down. + * + * LOCKING: + * EH context. + */ +void ata_acpi_dissociate(struct ata_host *host) +{ + int i; + + /* Restore initial _GTM values so that driver which attaches + * afterward can use them too. + */ + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap); + + if (ACPI_HANDLE(&ap->tdev) && gtm) + ata_acpi_stm(ap, gtm); + } +} + +/** + * ata_acpi_gtm - execute _GTM + * @ap: target ATA port + * @gtm: out parameter for _GTM result + * + * Evaluate _GTM and store the result in @gtm. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on success, -ENOENT if _GTM doesn't exist, -errno on failure. + */ +int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *gtm) +{ + struct acpi_buffer output = { .length = ACPI_ALLOCATE_BUFFER }; + union acpi_object *out_obj; + acpi_status status; + int rc = 0; + acpi_handle handle = ACPI_HANDLE(&ap->tdev); + + if (!handle) + return -EINVAL; + + status = acpi_evaluate_object(handle, "_GTM", NULL, &output); + + rc = -ENOENT; + if (status == AE_NOT_FOUND) + goto out_free; + + rc = -EINVAL; + if (ACPI_FAILURE(status)) { + ata_port_err(ap, "ACPI get timing mode failed (AE 0x%x)\n", + status); + goto out_free; + } + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_BUFFER) { + ata_port_warn(ap, "_GTM returned unexpected object type 0x%x\n", + out_obj->type); + + goto out_free; + } + + if (out_obj->buffer.length != sizeof(struct ata_acpi_gtm)) { + ata_port_err(ap, "_GTM returned invalid length %d\n", + out_obj->buffer.length); + goto out_free; + } + + memcpy(gtm, out_obj->buffer.pointer, sizeof(struct ata_acpi_gtm)); + rc = 0; + out_free: + kfree(output.pointer); + return rc; +} + +EXPORT_SYMBOL_GPL(ata_acpi_gtm); + +/** + * ata_acpi_stm - execute _STM + * @ap: target ATA port + * @stm: timing parameter to _STM + * + * Evaluate _STM with timing parameter @stm. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on success, -ENOENT if _STM doesn't exist, -errno on failure. + */ +int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm) +{ + acpi_status status; + struct ata_acpi_gtm stm_buf = *stm; + struct acpi_object_list input; + union acpi_object in_params[3]; + + in_params[0].type = ACPI_TYPE_BUFFER; + in_params[0].buffer.length = sizeof(struct ata_acpi_gtm); + in_params[0].buffer.pointer = (u8 *)&stm_buf; + /* Buffers for id may need byteswapping ? */ + in_params[1].type = ACPI_TYPE_BUFFER; + in_params[1].buffer.length = 512; + in_params[1].buffer.pointer = (u8 *)ap->link.device[0].id; + in_params[2].type = ACPI_TYPE_BUFFER; + in_params[2].buffer.length = 512; + in_params[2].buffer.pointer = (u8 *)ap->link.device[1].id; + + input.count = 3; + input.pointer = in_params; + + status = acpi_evaluate_object(ACPI_HANDLE(&ap->tdev), "_STM", + &input, NULL); + + if (status == AE_NOT_FOUND) + return -ENOENT; + if (ACPI_FAILURE(status)) { + ata_port_err(ap, "ACPI set timing mode failed (status=0x%x)\n", + status); + return -EINVAL; + } + return 0; +} + +EXPORT_SYMBOL_GPL(ata_acpi_stm); + +/** + * ata_dev_get_GTF - get the drive bootup default taskfile settings + * @dev: target ATA device + * @gtf: output parameter for buffer containing _GTF taskfile arrays + * + * This applies to both PATA and SATA drives. + * + * The _GTF method has no input parameters. + * It returns a variable number of register set values (registers + * hex 1F1..1F7, taskfiles). + * The is not known in advance, so have ACPI-CA + * allocate the buffer as needed and return it, then free it later. + * + * LOCKING: + * EH context. + * + * RETURNS: + * Number of taskfiles on success, 0 if _GTF doesn't exist. -EINVAL + * if _GTF is invalid. + */ +static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf) +{ + struct ata_port *ap = dev->link->ap; + acpi_status status; + struct acpi_buffer output; + union acpi_object *out_obj; + int rc = 0; + + /* if _GTF is cached, use the cached value */ + if (dev->gtf_cache) { + out_obj = dev->gtf_cache; + goto done; + } + + /* set up output buffer */ + output.length = ACPI_ALLOCATE_BUFFER; + output.pointer = NULL; /* ACPI-CA sets this; save/free it later */ + + if (ata_msg_probe(ap)) + ata_dev_dbg(dev, "%s: ENTER: port#: %d\n", + __func__, ap->port_no); + + /* _GTF has no input parameters */ + status = acpi_evaluate_object(ata_dev_acpi_handle(dev), "_GTF", NULL, + &output); + out_obj = dev->gtf_cache = output.pointer; + + if (ACPI_FAILURE(status)) { + if (status != AE_NOT_FOUND) { + ata_dev_warn(dev, "_GTF evaluation failed (AE 0x%x)\n", + status); + rc = -EINVAL; + } + goto out_free; + } + + if (!output.length || !output.pointer) { + if (ata_msg_probe(ap)) + ata_dev_dbg(dev, "%s: Run _GTF: length or ptr is NULL (0x%llx, 0x%p)\n", + __func__, + (unsigned long long)output.length, + output.pointer); + rc = -EINVAL; + goto out_free; + } + + if (out_obj->type != ACPI_TYPE_BUFFER) { + ata_dev_warn(dev, "_GTF unexpected object type 0x%x\n", + out_obj->type); + rc = -EINVAL; + goto out_free; + } + + if (out_obj->buffer.length % REGS_PER_GTF) { + ata_dev_warn(dev, "unexpected _GTF length (%d)\n", + out_obj->buffer.length); + rc = -EINVAL; + goto out_free; + } + + done: + rc = out_obj->buffer.length / REGS_PER_GTF; + if (gtf) { + *gtf = (void *)out_obj->buffer.pointer; + if (ata_msg_probe(ap)) + ata_dev_dbg(dev, "%s: returning gtf=%p, gtf_count=%d\n", + __func__, *gtf, rc); + } + return rc; + + out_free: + ata_acpi_clear_gtf(dev); + return rc; +} + +/** + * ata_acpi_gtm_xfermode - determine xfermode from GTM parameter + * @dev: target device + * @gtm: GTM parameter to use + * + * Determine xfermask for @dev from @gtm. + * + * LOCKING: + * None. + * + * RETURNS: + * Determined xfermask. + */ +unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev, + const struct ata_acpi_gtm *gtm) +{ + unsigned long xfer_mask = 0; + unsigned int type; + int unit; + u8 mode; + + /* we always use the 0 slot for crap hardware */ + unit = dev->devno; + if (!(gtm->flags & 0x10)) + unit = 0; + + /* PIO */ + mode = ata_timing_cycle2mode(ATA_SHIFT_PIO, gtm->drive[unit].pio); + xfer_mask |= ata_xfer_mode2mask(mode); + + /* See if we have MWDMA or UDMA data. We don't bother with + * MWDMA if UDMA is available as this means the BIOS set UDMA + * and our error changedown if it works is UDMA to PIO anyway. + */ + if (!(gtm->flags & (1 << (2 * unit)))) + type = ATA_SHIFT_MWDMA; + else + type = ATA_SHIFT_UDMA; + + mode = ata_timing_cycle2mode(type, gtm->drive[unit].dma); + xfer_mask |= ata_xfer_mode2mask(mode); + + return xfer_mask; +} +EXPORT_SYMBOL_GPL(ata_acpi_gtm_xfermask); + +/** + * ata_acpi_cbl_80wire - Check for 80 wire cable + * @ap: Port to check + * @gtm: GTM data to use + * + * Return 1 if the @gtm indicates the BIOS selected an 80wire mode. + */ +int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm) +{ + struct ata_device *dev; + + ata_for_each_dev(dev, &ap->link, ENABLED) { + unsigned long xfer_mask, udma_mask; + + xfer_mask = ata_acpi_gtm_xfermask(dev, gtm); + ata_unpack_xfermask(xfer_mask, NULL, NULL, &udma_mask); + + if (udma_mask & ~ATA_UDMA_MASK_40C) + return 1; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire); + +static void ata_acpi_gtf_to_tf(struct ata_device *dev, + const struct ata_acpi_gtf *gtf, + struct ata_taskfile *tf) +{ + ata_tf_init(dev, tf); + + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf->protocol = ATA_PROT_NODATA; + tf->feature = gtf->tf[0]; /* 0x1f1 */ + tf->nsect = gtf->tf[1]; /* 0x1f2 */ + tf->lbal = gtf->tf[2]; /* 0x1f3 */ + tf->lbam = gtf->tf[3]; /* 0x1f4 */ + tf->lbah = gtf->tf[4]; /* 0x1f5 */ + tf->device = gtf->tf[5]; /* 0x1f6 */ + tf->command = gtf->tf[6]; /* 0x1f7 */ +} + +static int ata_acpi_filter_tf(struct ata_device *dev, + const struct ata_taskfile *tf, + const struct ata_taskfile *ptf) +{ + if (dev->gtf_filter & ATA_ACPI_FILTER_SETXFER) { + /* libata doesn't use ACPI to configure transfer mode. + * It will only confuse device configuration. Skip. + */ + if (tf->command == ATA_CMD_SET_FEATURES && + tf->feature == SETFEATURES_XFER) + return 1; + } + + if (dev->gtf_filter & ATA_ACPI_FILTER_LOCK) { + /* BIOS writers, sorry but we don't wanna lock + * features unless the user explicitly said so. + */ + + /* DEVICE CONFIGURATION FREEZE LOCK */ + if (tf->command == ATA_CMD_CONF_OVERLAY && + tf->feature == ATA_DCO_FREEZE_LOCK) + return 1; + + /* SECURITY FREEZE LOCK */ + if (tf->command == ATA_CMD_SEC_FREEZE_LOCK) + return 1; + + /* SET MAX LOCK and SET MAX FREEZE LOCK */ + if ((!ptf || ptf->command != ATA_CMD_READ_NATIVE_MAX) && + tf->command == ATA_CMD_SET_MAX && + (tf->feature == ATA_SET_MAX_LOCK || + tf->feature == ATA_SET_MAX_FREEZE_LOCK)) + return 1; + } + + if (tf->command == ATA_CMD_SET_FEATURES && + tf->feature == SETFEATURES_SATA_ENABLE) { + /* inhibit enabling DIPM */ + if (dev->gtf_filter & ATA_ACPI_FILTER_DIPM && + tf->nsect == SATA_DIPM) + return 1; + + /* inhibit FPDMA non-zero offset */ + if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_OFFSET && + (tf->nsect == SATA_FPDMA_OFFSET || + tf->nsect == SATA_FPDMA_IN_ORDER)) + return 1; + + /* inhibit FPDMA auto activation */ + if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_AA && + tf->nsect == SATA_FPDMA_AA) + return 1; + } + + return 0; +} + +/** + * ata_acpi_run_tf - send taskfile registers to host controller + * @dev: target ATA device + * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7) + * + * Outputs ATA taskfile to standard ATA host controller. + * Writes the control, feature, nsect, lbal, lbam, and lbah registers. + * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, + * hob_lbal, hob_lbam, and hob_lbah. + * + * This function waits for idle (!BUSY and !DRQ) after writing + * registers. If the control register has a new value, this + * function also waits for idle after writing control and before + * writing the remaining registers. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 1 if command is executed successfully. 0 if ignored, rejected or + * filtered out, -errno on other errors. + */ +static int ata_acpi_run_tf(struct ata_device *dev, + const struct ata_acpi_gtf *gtf, + const struct ata_acpi_gtf *prev_gtf) +{ + struct ata_taskfile *pptf = NULL; + struct ata_taskfile tf, ptf, rtf; + unsigned int err_mask; + const char *level; + const char *descr; + char msg[60]; + int rc; + + if ((gtf->tf[0] == 0) && (gtf->tf[1] == 0) && (gtf->tf[2] == 0) + && (gtf->tf[3] == 0) && (gtf->tf[4] == 0) && (gtf->tf[5] == 0) + && (gtf->tf[6] == 0)) + return 0; + + ata_acpi_gtf_to_tf(dev, gtf, &tf); + if (prev_gtf) { + ata_acpi_gtf_to_tf(dev, prev_gtf, &ptf); + pptf = &ptf; + } + + if (!ata_acpi_filter_tf(dev, &tf, pptf)) { + rtf = tf; + err_mask = ata_exec_internal(dev, &rtf, NULL, + DMA_NONE, NULL, 0, 0); + + switch (err_mask) { + case 0: + level = KERN_DEBUG; + snprintf(msg, sizeof(msg), "succeeded"); + rc = 1; + break; + + case AC_ERR_DEV: + level = KERN_INFO; + snprintf(msg, sizeof(msg), + "rejected by device (Stat=0x%02x Err=0x%02x)", + rtf.command, rtf.feature); + rc = 0; + break; + + default: + level = KERN_ERR; + snprintf(msg, sizeof(msg), + "failed (Emask=0x%x Stat=0x%02x Err=0x%02x)", + err_mask, rtf.command, rtf.feature); + rc = -EIO; + break; + } + } else { + level = KERN_INFO; + snprintf(msg, sizeof(msg), "filtered out"); + rc = 0; + } + descr = ata_get_cmd_descript(tf.command); + + ata_dev_printk(dev, level, + "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x (%s) %s\n", + tf.command, tf.feature, tf.nsect, tf.lbal, + tf.lbam, tf.lbah, tf.device, + (descr ? descr : "unknown"), msg); + + return rc; +} + +/** + * ata_acpi_exec_tfs - get then write drive taskfile settings + * @dev: target ATA device + * @nr_executed: out parameter for the number of executed commands + * + * Evaluate _GTF and execute returned taskfiles. + * + * LOCKING: + * EH context. + * + * RETURNS: + * Number of executed taskfiles on success, 0 if _GTF doesn't exist. + * -errno on other errors. + */ +static int ata_acpi_exec_tfs(struct ata_device *dev, int *nr_executed) +{ + struct ata_acpi_gtf *gtf = NULL, *pgtf = NULL; + int gtf_count, i, rc; + + /* get taskfiles */ + rc = ata_dev_get_GTF(dev, >f); + if (rc < 0) + return rc; + gtf_count = rc; + + /* execute them */ + for (i = 0; i < gtf_count; i++, gtf++) { + rc = ata_acpi_run_tf(dev, gtf, pgtf); + if (rc < 0) + break; + if (rc) { + (*nr_executed)++; + pgtf = gtf; + } + } + + ata_acpi_clear_gtf(dev); + + if (rc < 0) + return rc; + return 0; +} + +/** + * ata_acpi_push_id - send Identify data to drive + * @dev: target ATA device + * + * _SDD ACPI object: for SATA mode only + * Must be after Identify (Packet) Device -- uses its data + * ATM this function never returns a failure. It is an optional + * method and if it fails for whatever reason, we should still + * just keep going. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on success, -ENOENT if _SDD doesn't exist, -errno on failure. + */ +static int ata_acpi_push_id(struct ata_device *dev) +{ + struct ata_port *ap = dev->link->ap; + acpi_status status; + struct acpi_object_list input; + union acpi_object in_params[1]; + + if (ata_msg_probe(ap)) + ata_dev_dbg(dev, "%s: ix = %d, port#: %d\n", + __func__, dev->devno, ap->port_no); + + /* Give the drive Identify data to the drive via the _SDD method */ + /* _SDD: set up input parameters */ + input.count = 1; + input.pointer = in_params; + in_params[0].type = ACPI_TYPE_BUFFER; + in_params[0].buffer.length = sizeof(dev->id[0]) * ATA_ID_WORDS; + in_params[0].buffer.pointer = (u8 *)dev->id; + /* Output buffer: _SDD has no output */ + + /* It's OK for _SDD to be missing too. */ + swap_buf_le16(dev->id, ATA_ID_WORDS); + status = acpi_evaluate_object(ata_dev_acpi_handle(dev), "_SDD", &input, + NULL); + swap_buf_le16(dev->id, ATA_ID_WORDS); + + if (status == AE_NOT_FOUND) + return -ENOENT; + + if (ACPI_FAILURE(status)) { + ata_dev_warn(dev, "ACPI _SDD failed (AE 0x%x)\n", status); + return -EIO; + } + + return 0; +} + +/** + * ata_acpi_on_suspend - ATA ACPI hook called on suspend + * @ap: target ATA port + * + * This function is called when @ap is about to be suspended. All + * devices are already put to sleep but the port_suspend() callback + * hasn't been executed yet. Error return from this function aborts + * suspend. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int ata_acpi_on_suspend(struct ata_port *ap) +{ + /* nada */ + return 0; +} + +/** + * ata_acpi_on_resume - ATA ACPI hook called on resume + * @ap: target ATA port + * + * This function is called when @ap is resumed - right after port + * itself is resumed but before any EH action is taken. + * + * LOCKING: + * EH context. + */ +void ata_acpi_on_resume(struct ata_port *ap) +{ + const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap); + struct ata_device *dev; + + if (ACPI_HANDLE(&ap->tdev) && gtm) { + /* _GTM valid */ + + /* restore timing parameters */ + ata_acpi_stm(ap, gtm); + + /* _GTF should immediately follow _STM so that it can + * use values set by _STM. Cache _GTF result and + * schedule _GTF. + */ + ata_for_each_dev(dev, &ap->link, ALL) { + ata_acpi_clear_gtf(dev); + if (ata_dev_enabled(dev) && + ata_dev_acpi_handle(dev) && + ata_dev_get_GTF(dev, NULL) >= 0) + dev->flags |= ATA_DFLAG_ACPI_PENDING; + } + } else { + /* SATA _GTF needs to be evaulated after _SDD and + * there's no reason to evaluate IDE _GTF early + * without _STM. Clear cache and schedule _GTF. + */ + ata_for_each_dev(dev, &ap->link, ALL) { + ata_acpi_clear_gtf(dev); + if (ata_dev_enabled(dev)) + dev->flags |= ATA_DFLAG_ACPI_PENDING; + } + } +} + +static int ata_acpi_choose_suspend_state(struct ata_device *dev, bool runtime) +{ + int d_max_in = ACPI_STATE_D3_COLD; + if (!runtime) + goto out; + + /* + * For ATAPI, runtime D3 cold is only allowed + * for ZPODD in zero power ready state + */ + if (dev->class == ATA_DEV_ATAPI && + !(zpodd_dev_enabled(dev) && zpodd_zpready(dev))) + d_max_in = ACPI_STATE_D3_HOT; + +out: + return acpi_pm_device_sleep_state(&dev->tdev, NULL, d_max_in); +} + +static void sata_acpi_set_state(struct ata_port *ap, pm_message_t state) +{ + bool runtime = PMSG_IS_AUTO(state); + struct ata_device *dev; + acpi_handle handle; + int acpi_state; + + ata_for_each_dev(dev, &ap->link, ENABLED) { + handle = ata_dev_acpi_handle(dev); + if (!handle) + continue; + + if (!(state.event & PM_EVENT_RESUME)) { + acpi_state = ata_acpi_choose_suspend_state(dev, runtime); + if (acpi_state == ACPI_STATE_D0) + continue; + if (runtime && zpodd_dev_enabled(dev) && + acpi_state == ACPI_STATE_D3_COLD) + zpodd_enable_run_wake(dev); + acpi_bus_set_power(handle, acpi_state); + } else { + if (runtime && zpodd_dev_enabled(dev)) + zpodd_disable_run_wake(dev); + acpi_bus_set_power(handle, ACPI_STATE_D0); + } + } +} + +/* ACPI spec requires _PS0 when IDE power on and _PS3 when power off */ +static void pata_acpi_set_state(struct ata_port *ap, pm_message_t state) +{ + struct ata_device *dev; + acpi_handle port_handle; + + port_handle = ACPI_HANDLE(&ap->tdev); + if (!port_handle) + return; + + /* channel first and then drives for power on and vica versa + for power off */ + if (state.event & PM_EVENT_RESUME) + acpi_bus_set_power(port_handle, ACPI_STATE_D0); + + ata_for_each_dev(dev, &ap->link, ENABLED) { + acpi_handle dev_handle = ata_dev_acpi_handle(dev); + if (!dev_handle) + continue; + + acpi_bus_set_power(dev_handle, state.event & PM_EVENT_RESUME ? + ACPI_STATE_D0 : ACPI_STATE_D3_COLD); + } + + if (!(state.event & PM_EVENT_RESUME)) + acpi_bus_set_power(port_handle, ACPI_STATE_D3_COLD); +} + +/** + * ata_acpi_set_state - set the port power state + * @ap: target ATA port + * @state: state, on/off + * + * This function sets a proper ACPI D state for the device on + * system and runtime PM operations. + */ +void ata_acpi_set_state(struct ata_port *ap, pm_message_t state) +{ + if (ap->flags & ATA_FLAG_ACPI_SATA) + sata_acpi_set_state(ap, state); + else + pata_acpi_set_state(ap, state); +} + +/** + * ata_acpi_on_devcfg - ATA ACPI hook called on device donfiguration + * @dev: target ATA device + * + * This function is called when @dev is about to be configured. + * IDENTIFY data might have been modified after this hook is run. + * + * LOCKING: + * EH context. + * + * RETURNS: + * Positive number if IDENTIFY data needs to be refreshed, 0 if not, + * -errno on failure. + */ +int ata_acpi_on_devcfg(struct ata_device *dev) +{ + struct ata_port *ap = dev->link->ap; + struct ata_eh_context *ehc = &ap->link.eh_context; + int acpi_sata = ap->flags & ATA_FLAG_ACPI_SATA; + int nr_executed = 0; + int rc; + + if (!ata_dev_acpi_handle(dev)) + return 0; + + /* do we need to do _GTF? */ + if (!(dev->flags & ATA_DFLAG_ACPI_PENDING) && + !(acpi_sata && (ehc->i.flags & ATA_EHI_DID_HARDRESET))) + return 0; + + /* do _SDD if SATA */ + if (acpi_sata) { + rc = ata_acpi_push_id(dev); + if (rc && rc != -ENOENT) + goto acpi_err; + } + + /* do _GTF */ + rc = ata_acpi_exec_tfs(dev, &nr_executed); + if (rc) + goto acpi_err; + + dev->flags &= ~ATA_DFLAG_ACPI_PENDING; + + /* refresh IDENTIFY page if any _GTF command has been executed */ + if (nr_executed) { + rc = ata_dev_reread_id(dev, 0); + if (rc < 0) { + ata_dev_err(dev, + "failed to IDENTIFY after ACPI commands\n"); + return rc; + } + } + + return 0; + + acpi_err: + /* ignore evaluation failure if we can continue safely */ + if (rc == -EINVAL && !nr_executed && !(ap->pflags & ATA_PFLAG_FROZEN)) + return 0; + + /* fail and let EH retry once more for unknown IO errors */ + if (!(dev->flags & ATA_DFLAG_ACPI_FAILED)) { + dev->flags |= ATA_DFLAG_ACPI_FAILED; + return rc; + } + + dev->flags |= ATA_DFLAG_ACPI_DISABLED; + ata_dev_warn(dev, "ACPI: failed the second time, disabled\n"); + + /* We can safely continue if no _GTF command has been executed + * and port is not frozen. + */ + if (!nr_executed && !(ap->pflags & ATA_PFLAG_FROZEN)) + return 0; + + return rc; +} + +/** + * ata_acpi_on_disable - ATA ACPI hook called when a device is disabled + * @dev: target ATA device + * + * This function is called when @dev is about to be disabled. + * + * LOCKING: + * EH context. + */ +void ata_acpi_on_disable(struct ata_device *dev) +{ + ata_acpi_clear_gtf(dev); +} diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c new file mode 100644 index 000000000..b37b74395 --- /dev/null +++ b/drivers/ata/libata-core.c @@ -0,0 +1,7023 @@ +/* + * libata-core.c - helper library for ATA + * + * Maintained by: Tejun Heo + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2004 Red Hat, Inc. All rights reserved. + * Copyright 2003-2004 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from http://www.t13.org/ and + * http://www.sata-io.org/ + * + * Standards documents from: + * http://www.t13.org (ATA standards, PCI DMA IDE spec) + * http://www.t10.org (SCSI MMC - for ATAPI MMC) + * http://www.sata-io.org (SATA) + * http://www.compactflash.org (CF) + * http://www.qic.org (QIC157 - Tape and DSC) + * http://www.ce-ata.org (CE-ATA: not supported) + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define CREATE_TRACE_POINTS +#include + +#include "libata.h" +#include "libata-transport.h" + +/* debounce timing parameters in msecs { interval, duration, timeout } */ +const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 }; +const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 }; +const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 }; + +const struct ata_port_operations ata_base_port_ops = { + .prereset = ata_std_prereset, + .postreset = ata_std_postreset, + .error_handler = ata_std_error_handler, + .sched_eh = ata_std_sched_eh, + .end_eh = ata_std_end_eh, +}; + +const struct ata_port_operations sata_port_ops = { + .inherits = &ata_base_port_ops, + + .qc_defer = ata_std_qc_defer, + .hardreset = sata_std_hardreset, +}; + +static unsigned int ata_dev_init_params(struct ata_device *dev, + u16 heads, u16 sectors); +static unsigned int ata_dev_set_xfermode(struct ata_device *dev); +static void ata_dev_xfermask(struct ata_device *dev); +static unsigned long ata_dev_blacklisted(const struct ata_device *dev); + +atomic_t ata_print_id = ATOMIC_INIT(0); + +struct ata_force_param { + const char *name; + unsigned int cbl; + int spd_limit; + unsigned long xfer_mask; + unsigned int horkage_on; + unsigned int horkage_off; + unsigned int lflags; +}; + +struct ata_force_ent { + int port; + int device; + struct ata_force_param param; +}; + +static struct ata_force_ent *ata_force_tbl; +static int ata_force_tbl_size; + +static char ata_force_param_buf[PAGE_SIZE] __initdata; +/* param_buf is thrown away after initialization, disallow read */ +module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0); +MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)"); + +static int atapi_enabled = 1; +module_param(atapi_enabled, int, 0444); +MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on [default])"); + +static int atapi_dmadir = 0; +module_param(atapi_dmadir, int, 0444); +MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off [default], 1=on)"); + +int atapi_passthru16 = 1; +module_param(atapi_passthru16, int, 0444); +MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices (0=off, 1=on [default])"); + +int libata_fua = 0; +module_param_named(fua, libata_fua, int, 0444); +MODULE_PARM_DESC(fua, "FUA support (0=off [default], 1=on)"); + +static int ata_ignore_hpa; +module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644); +MODULE_PARM_DESC(ignore_hpa, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)"); + +static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CFA; +module_param_named(dma, libata_dma_mask, int, 0444); +MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)"); + +static int ata_probe_timeout; +module_param(ata_probe_timeout, int, 0444); +MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); + +int libata_noacpi = 0; +module_param_named(noacpi, libata_noacpi, int, 0444); +MODULE_PARM_DESC(noacpi, "Disable the use of ACPI in probe/suspend/resume (0=off [default], 1=on)"); + +int libata_allow_tpm = 0; +module_param_named(allow_tpm, libata_allow_tpm, int, 0444); +MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)"); + +static int atapi_an; +module_param(atapi_an, int, 0444); +MODULE_PARM_DESC(atapi_an, "Enable ATAPI AN media presence notification (0=0ff [default], 1=on)"); + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("Library module for ATA devices"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + + +static bool ata_sstatus_online(u32 sstatus) +{ + return (sstatus & 0xf) == 0x3; +} + +/** + * ata_link_next - link iteration helper + * @link: the previous link, NULL to start + * @ap: ATA port containing links to iterate + * @mode: iteration mode, one of ATA_LITER_* + * + * LOCKING: + * Host lock or EH context. + * + * RETURNS: + * Pointer to the next link. + */ +struct ata_link *ata_link_next(struct ata_link *link, struct ata_port *ap, + enum ata_link_iter_mode mode) +{ + BUG_ON(mode != ATA_LITER_EDGE && + mode != ATA_LITER_PMP_FIRST && mode != ATA_LITER_HOST_FIRST); + + /* NULL link indicates start of iteration */ + if (!link) + switch (mode) { + case ATA_LITER_EDGE: + case ATA_LITER_PMP_FIRST: + if (sata_pmp_attached(ap)) + return ap->pmp_link; + /* fall through */ + case ATA_LITER_HOST_FIRST: + return &ap->link; + } + + /* we just iterated over the host link, what's next? */ + if (link == &ap->link) + switch (mode) { + case ATA_LITER_HOST_FIRST: + if (sata_pmp_attached(ap)) + return ap->pmp_link; + /* fall through */ + case ATA_LITER_PMP_FIRST: + if (unlikely(ap->slave_link)) + return ap->slave_link; + /* fall through */ + case ATA_LITER_EDGE: + return NULL; + } + + /* slave_link excludes PMP */ + if (unlikely(link == ap->slave_link)) + return NULL; + + /* we were over a PMP link */ + if (++link < ap->pmp_link + ap->nr_pmp_links) + return link; + + if (mode == ATA_LITER_PMP_FIRST) + return &ap->link; + + return NULL; +} + +/** + * ata_dev_next - device iteration helper + * @dev: the previous device, NULL to start + * @link: ATA link containing devices to iterate + * @mode: iteration mode, one of ATA_DITER_* + * + * LOCKING: + * Host lock or EH context. + * + * RETURNS: + * Pointer to the next device. + */ +struct ata_device *ata_dev_next(struct ata_device *dev, struct ata_link *link, + enum ata_dev_iter_mode mode) +{ + BUG_ON(mode != ATA_DITER_ENABLED && mode != ATA_DITER_ENABLED_REVERSE && + mode != ATA_DITER_ALL && mode != ATA_DITER_ALL_REVERSE); + + /* NULL dev indicates start of iteration */ + if (!dev) + switch (mode) { + case ATA_DITER_ENABLED: + case ATA_DITER_ALL: + dev = link->device; + goto check; + case ATA_DITER_ENABLED_REVERSE: + case ATA_DITER_ALL_REVERSE: + dev = link->device + ata_link_max_devices(link) - 1; + goto check; + } + + next: + /* move to the next one */ + switch (mode) { + case ATA_DITER_ENABLED: + case ATA_DITER_ALL: + if (++dev < link->device + ata_link_max_devices(link)) + goto check; + return NULL; + case ATA_DITER_ENABLED_REVERSE: + case ATA_DITER_ALL_REVERSE: + if (--dev >= link->device) + goto check; + return NULL; + } + + check: + if ((mode == ATA_DITER_ENABLED || mode == ATA_DITER_ENABLED_REVERSE) && + !ata_dev_enabled(dev)) + goto next; + return dev; +} + +/** + * ata_dev_phys_link - find physical link for a device + * @dev: ATA device to look up physical link for + * + * Look up physical link which @dev is attached to. Note that + * this is different from @dev->link only when @dev is on slave + * link. For all other cases, it's the same as @dev->link. + * + * LOCKING: + * Don't care. + * + * RETURNS: + * Pointer to the found physical link. + */ +struct ata_link *ata_dev_phys_link(struct ata_device *dev) +{ + struct ata_port *ap = dev->link->ap; + + if (!ap->slave_link) + return dev->link; + if (!dev->devno) + return &ap->link; + return ap->slave_link; +} + +/** + * ata_force_cbl - force cable type according to libata.force + * @ap: ATA port of interest + * + * Force cable type according to libata.force and whine about it. + * The last entry which has matching port number is used, so it + * can be specified as part of device force parameters. For + * example, both "a:40c,1.00:udma4" and "1.00:40c,udma4" have the + * same effect. + * + * LOCKING: + * EH context. + */ +void ata_force_cbl(struct ata_port *ap) +{ + int i; + + for (i = ata_force_tbl_size - 1; i >= 0; i--) { + const struct ata_force_ent *fe = &ata_force_tbl[i]; + + if (fe->port != -1 && fe->port != ap->print_id) + continue; + + if (fe->param.cbl == ATA_CBL_NONE) + continue; + + ap->cbl = fe->param.cbl; + ata_port_notice(ap, "FORCE: cable set to %s\n", fe->param.name); + return; + } +} + +/** + * ata_force_link_limits - force link limits according to libata.force + * @link: ATA link of interest + * + * Force link flags and SATA spd limit according to libata.force + * and whine about it. When only the port part is specified + * (e.g. 1:), the limit applies to all links connected to both + * the host link and all fan-out ports connected via PMP. If the + * device part is specified as 0 (e.g. 1.00:), it specifies the + * first fan-out link not the host link. Device number 15 always + * points to the host link whether PMP is attached or not. If the + * controller has slave link, device number 16 points to it. + * + * LOCKING: + * EH context. + */ +static void ata_force_link_limits(struct ata_link *link) +{ + bool did_spd = false; + int linkno = link->pmp; + int i; + + if (ata_is_host_link(link)) + linkno += 15; + + for (i = ata_force_tbl_size - 1; i >= 0; i--) { + const struct ata_force_ent *fe = &ata_force_tbl[i]; + + if (fe->port != -1 && fe->port != link->ap->print_id) + continue; + + if (fe->device != -1 && fe->device != linkno) + continue; + + /* only honor the first spd limit */ + if (!did_spd && fe->param.spd_limit) { + link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1; + ata_link_notice(link, "FORCE: PHY spd limit set to %s\n", + fe->param.name); + did_spd = true; + } + + /* let lflags stack */ + if (fe->param.lflags) { + link->flags |= fe->param.lflags; + ata_link_notice(link, + "FORCE: link flag 0x%x forced -> 0x%x\n", + fe->param.lflags, link->flags); + } + } +} + +/** + * ata_force_xfermask - force xfermask according to libata.force + * @dev: ATA device of interest + * + * Force xfer_mask according to libata.force and whine about it. + * For consistency with link selection, device number 15 selects + * the first device connected to the host link. + * + * LOCKING: + * EH context. + */ +static void ata_force_xfermask(struct ata_device *dev) +{ + int devno = dev->link->pmp + dev->devno; + int alt_devno = devno; + int i; + + /* allow n.15/16 for devices attached to host port */ + if (ata_is_host_link(dev->link)) + alt_devno += 15; + + for (i = ata_force_tbl_size - 1; i >= 0; i--) { + const struct ata_force_ent *fe = &ata_force_tbl[i]; + unsigned long pio_mask, mwdma_mask, udma_mask; + + if (fe->port != -1 && fe->port != dev->link->ap->print_id) + continue; + + if (fe->device != -1 && fe->device != devno && + fe->device != alt_devno) + continue; + + if (!fe->param.xfer_mask) + continue; + + ata_unpack_xfermask(fe->param.xfer_mask, + &pio_mask, &mwdma_mask, &udma_mask); + if (udma_mask) + dev->udma_mask = udma_mask; + else if (mwdma_mask) { + dev->udma_mask = 0; + dev->mwdma_mask = mwdma_mask; + } else { + dev->udma_mask = 0; + dev->mwdma_mask = 0; + dev->pio_mask = pio_mask; + } + + ata_dev_notice(dev, "FORCE: xfer_mask set to %s\n", + fe->param.name); + return; + } +} + +/** + * ata_force_horkage - force horkage according to libata.force + * @dev: ATA device of interest + * + * Force horkage according to libata.force and whine about it. + * For consistency with link selection, device number 15 selects + * the first device connected to the host link. + * + * LOCKING: + * EH context. + */ +static void ata_force_horkage(struct ata_device *dev) +{ + int devno = dev->link->pmp + dev->devno; + int alt_devno = devno; + int i; + + /* allow n.15/16 for devices attached to host port */ + if (ata_is_host_link(dev->link)) + alt_devno += 15; + + for (i = 0; i < ata_force_tbl_size; i++) { + const struct ata_force_ent *fe = &ata_force_tbl[i]; + + if (fe->port != -1 && fe->port != dev->link->ap->print_id) + continue; + + if (fe->device != -1 && fe->device != devno && + fe->device != alt_devno) + continue; + + if (!(~dev->horkage & fe->param.horkage_on) && + !(dev->horkage & fe->param.horkage_off)) + continue; + + dev->horkage |= fe->param.horkage_on; + dev->horkage &= ~fe->param.horkage_off; + + ata_dev_notice(dev, "FORCE: horkage modified (%s)\n", + fe->param.name); + } +} + +/** + * atapi_cmd_type - Determine ATAPI command type from SCSI opcode + * @opcode: SCSI opcode + * + * Determine ATAPI command type from @opcode. + * + * LOCKING: + * None. + * + * RETURNS: + * ATAPI_{READ|WRITE|READ_CD|PASS_THRU|MISC} + */ +int atapi_cmd_type(u8 opcode) +{ + switch (opcode) { + case GPCMD_READ_10: + case GPCMD_READ_12: + return ATAPI_READ; + + case GPCMD_WRITE_10: + case GPCMD_WRITE_12: + case GPCMD_WRITE_AND_VERIFY_10: + return ATAPI_WRITE; + + case GPCMD_READ_CD: + case GPCMD_READ_CD_MSF: + return ATAPI_READ_CD; + + case ATA_16: + case ATA_12: + if (atapi_passthru16) + return ATAPI_PASS_THRU; + /* fall thru */ + default: + return ATAPI_MISC; + } +} + +/** + * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure + * @tf: Taskfile to convert + * @pmp: Port multiplier port + * @is_cmd: This FIS is for command + * @fis: Buffer into which data will output + * + * Converts a standard ATA taskfile to a Serial ATA + * FIS structure (Register - Host to Device). + * + * LOCKING: + * Inherited from caller. + */ +void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis) +{ + fis[0] = 0x27; /* Register - Host to Device FIS */ + fis[1] = pmp & 0xf; /* Port multiplier number*/ + if (is_cmd) + fis[1] |= (1 << 7); /* bit 7 indicates Command FIS */ + + fis[2] = tf->command; + fis[3] = tf->feature; + + fis[4] = tf->lbal; + fis[5] = tf->lbam; + fis[6] = tf->lbah; + fis[7] = tf->device; + + fis[8] = tf->hob_lbal; + fis[9] = tf->hob_lbam; + fis[10] = tf->hob_lbah; + fis[11] = tf->hob_feature; + + fis[12] = tf->nsect; + fis[13] = tf->hob_nsect; + fis[14] = 0; + fis[15] = tf->ctl; + + fis[16] = tf->auxiliary & 0xff; + fis[17] = (tf->auxiliary >> 8) & 0xff; + fis[18] = (tf->auxiliary >> 16) & 0xff; + fis[19] = (tf->auxiliary >> 24) & 0xff; +} + +/** + * ata_tf_from_fis - Convert SATA FIS to ATA taskfile + * @fis: Buffer from which data will be input + * @tf: Taskfile to output + * + * Converts a serial ATA FIS structure to a standard ATA taskfile. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf) +{ + tf->command = fis[2]; /* status */ + tf->feature = fis[3]; /* error */ + + tf->lbal = fis[4]; + tf->lbam = fis[5]; + tf->lbah = fis[6]; + tf->device = fis[7]; + + tf->hob_lbal = fis[8]; + tf->hob_lbam = fis[9]; + tf->hob_lbah = fis[10]; + + tf->nsect = fis[12]; + tf->hob_nsect = fis[13]; +} + +static const u8 ata_rw_cmds[] = { + /* pio multi */ + ATA_CMD_READ_MULTI, + ATA_CMD_WRITE_MULTI, + ATA_CMD_READ_MULTI_EXT, + ATA_CMD_WRITE_MULTI_EXT, + 0, + 0, + 0, + ATA_CMD_WRITE_MULTI_FUA_EXT, + /* pio */ + ATA_CMD_PIO_READ, + ATA_CMD_PIO_WRITE, + ATA_CMD_PIO_READ_EXT, + ATA_CMD_PIO_WRITE_EXT, + 0, + 0, + 0, + 0, + /* dma */ + ATA_CMD_READ, + ATA_CMD_WRITE, + ATA_CMD_READ_EXT, + ATA_CMD_WRITE_EXT, + 0, + 0, + 0, + ATA_CMD_WRITE_FUA_EXT +}; + +/** + * ata_rwcmd_protocol - set taskfile r/w commands and protocol + * @tf: command to examine and configure + * @dev: device tf belongs to + * + * Examine the device configuration and tf->flags to calculate + * the proper read/write commands and protocol to use. + * + * LOCKING: + * caller. + */ +static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev) +{ + u8 cmd; + + int index, fua, lba48, write; + + fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0; + lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0; + write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0; + + if (dev->flags & ATA_DFLAG_PIO) { + tf->protocol = ATA_PROT_PIO; + index = dev->multi_count ? 0 : 8; + } else if (lba48 && (dev->link->ap->flags & ATA_FLAG_PIO_LBA48)) { + /* Unable to use DMA due to host limitation */ + tf->protocol = ATA_PROT_PIO; + index = dev->multi_count ? 0 : 8; + } else { + tf->protocol = ATA_PROT_DMA; + index = 16; + } + + cmd = ata_rw_cmds[index + fua + lba48 + write]; + if (cmd) { + tf->command = cmd; + return 0; + } + return -1; +} + +/** + * ata_tf_read_block - Read block address from ATA taskfile + * @tf: ATA taskfile of interest + * @dev: ATA device @tf belongs to + * + * LOCKING: + * None. + * + * Read block address from @tf. This function can handle all + * three address formats - LBA, LBA48 and CHS. tf->protocol and + * flags select the address format to use. + * + * RETURNS: + * Block address read from @tf. + */ +u64 ata_tf_read_block(const struct ata_taskfile *tf, struct ata_device *dev) +{ + u64 block = 0; + + if (!dev || tf->flags & ATA_TFLAG_LBA) { + if (tf->flags & ATA_TFLAG_LBA48) { + block |= (u64)tf->hob_lbah << 40; + block |= (u64)tf->hob_lbam << 32; + block |= (u64)tf->hob_lbal << 24; + } else + block |= (tf->device & 0xf) << 24; + + block |= tf->lbah << 16; + block |= tf->lbam << 8; + block |= tf->lbal; + } else { + u32 cyl, head, sect; + + cyl = tf->lbam | (tf->lbah << 8); + head = tf->device & 0xf; + sect = tf->lbal; + + if (!sect) { + ata_dev_warn(dev, + "device reported invalid CHS sector 0\n"); + sect = 1; /* oh well */ + } + + block = (cyl * dev->heads + head) * dev->sectors + sect - 1; + } + + return block; +} + +/** + * ata_build_rw_tf - Build ATA taskfile for given read/write request + * @tf: Target ATA taskfile + * @dev: ATA device @tf belongs to + * @block: Block address + * @n_block: Number of blocks + * @tf_flags: RW/FUA etc... + * @tag: tag + * + * LOCKING: + * None. + * + * Build ATA taskfile @tf for read/write request described by + * @block, @n_block, @tf_flags and @tag on @dev. + * + * RETURNS: + * + * 0 on success, -ERANGE if the request is too large for @dev, + * -EINVAL if the request is invalid. + */ +int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, + u64 block, u32 n_block, unsigned int tf_flags, + unsigned int tag) +{ + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf->flags |= tf_flags; + + if (ata_ncq_enabled(dev) && likely(tag != ATA_TAG_INTERNAL)) { + /* yay, NCQ */ + if (!lba_48_ok(block, n_block)) + return -ERANGE; + + tf->protocol = ATA_PROT_NCQ; + tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; + + if (tf->flags & ATA_TFLAG_WRITE) + tf->command = ATA_CMD_FPDMA_WRITE; + else + tf->command = ATA_CMD_FPDMA_READ; + + tf->nsect = tag << 3; + tf->hob_feature = (n_block >> 8) & 0xff; + tf->feature = n_block & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device = ATA_LBA; + if (tf->flags & ATA_TFLAG_FUA) + tf->device |= 1 << 7; + } else if (dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + + if (lba_28_ok(block, n_block)) { + /* use LBA28 */ + tf->device |= (block >> 24) & 0xf; + } else if (lba_48_ok(block, n_block)) { + if (!(dev->flags & ATA_DFLAG_LBA48)) + return -ERANGE; + + /* use LBA48 */ + tf->flags |= ATA_TFLAG_LBA48; + + tf->hob_nsect = (n_block >> 8) & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else + /* request too large even for LBA48 */ + return -ERANGE; + + if (unlikely(ata_rwcmd_protocol(tf, dev) < 0)) + return -EINVAL; + + tf->nsect = n_block & 0xff; + + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device |= ATA_LBA; + } else { + /* CHS */ + u32 sect, head, cyl, track; + + /* The request -may- be too large for CHS addressing. */ + if (!lba_28_ok(block, n_block)) + return -ERANGE; + + if (unlikely(ata_rwcmd_protocol(tf, dev) < 0)) + return -EINVAL; + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block %u track %u cyl %u head %u sect %u\n", + (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + return -ERANGE; + + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; + } + + return 0; +} + +/** + * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask + * @pio_mask: pio_mask + * @mwdma_mask: mwdma_mask + * @udma_mask: udma_mask + * + * Pack @pio_mask, @mwdma_mask and @udma_mask into a single + * unsigned int xfer_mask. + * + * LOCKING: + * None. + * + * RETURNS: + * Packed xfer_mask. + */ +unsigned long ata_pack_xfermask(unsigned long pio_mask, + unsigned long mwdma_mask, + unsigned long udma_mask) +{ + return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) | + ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) | + ((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA); +} + +/** + * ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks + * @xfer_mask: xfer_mask to unpack + * @pio_mask: resulting pio_mask + * @mwdma_mask: resulting mwdma_mask + * @udma_mask: resulting udma_mask + * + * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask. + * Any NULL distination masks will be ignored. + */ +void ata_unpack_xfermask(unsigned long xfer_mask, unsigned long *pio_mask, + unsigned long *mwdma_mask, unsigned long *udma_mask) +{ + if (pio_mask) + *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO; + if (mwdma_mask) + *mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA; + if (udma_mask) + *udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA; +} + +static const struct ata_xfer_ent { + int shift, bits; + u8 base; +} ata_xfer_tbl[] = { + { ATA_SHIFT_PIO, ATA_NR_PIO_MODES, XFER_PIO_0 }, + { ATA_SHIFT_MWDMA, ATA_NR_MWDMA_MODES, XFER_MW_DMA_0 }, + { ATA_SHIFT_UDMA, ATA_NR_UDMA_MODES, XFER_UDMA_0 }, + { -1, }, +}; + +/** + * ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask + * @xfer_mask: xfer_mask of interest + * + * Return matching XFER_* value for @xfer_mask. Only the highest + * bit of @xfer_mask is considered. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching XFER_* value, 0xff if no match found. + */ +u8 ata_xfer_mask2mode(unsigned long xfer_mask) +{ + int highbit = fls(xfer_mask) - 1; + const struct ata_xfer_ent *ent; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (highbit >= ent->shift && highbit < ent->shift + ent->bits) + return ent->base + highbit - ent->shift; + return 0xff; +} + +/** + * ata_xfer_mode2mask - Find matching xfer_mask for XFER_* + * @xfer_mode: XFER_* of interest + * + * Return matching xfer_mask for @xfer_mode. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching xfer_mask, 0 if no match found. + */ +unsigned long ata_xfer_mode2mask(u8 xfer_mode) +{ + const struct ata_xfer_ent *ent; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) + return ((2 << (ent->shift + xfer_mode - ent->base)) - 1) + & ~((1 << ent->shift) - 1); + return 0; +} + +/** + * ata_xfer_mode2shift - Find matching xfer_shift for XFER_* + * @xfer_mode: XFER_* of interest + * + * Return matching xfer_shift for @xfer_mode. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching xfer_shift, -1 if no match found. + */ +int ata_xfer_mode2shift(unsigned long xfer_mode) +{ + const struct ata_xfer_ent *ent; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) + return ent->shift; + return -1; +} + +/** + * ata_mode_string - convert xfer_mask to string + * @xfer_mask: mask of bits supported; only highest bit counts. + * + * Determine string which represents the highest speed + * (highest bit in @modemask). + * + * LOCKING: + * None. + * + * RETURNS: + * Constant C string representing highest speed listed in + * @mode_mask, or the constant C string "". + */ +const char *ata_mode_string(unsigned long xfer_mask) +{ + static const char * const xfer_mode_str[] = { + "PIO0", + "PIO1", + "PIO2", + "PIO3", + "PIO4", + "PIO5", + "PIO6", + "MWDMA0", + "MWDMA1", + "MWDMA2", + "MWDMA3", + "MWDMA4", + "UDMA/16", + "UDMA/25", + "UDMA/33", + "UDMA/44", + "UDMA/66", + "UDMA/100", + "UDMA/133", + "UDMA7", + }; + int highbit; + + highbit = fls(xfer_mask) - 1; + if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str)) + return xfer_mode_str[highbit]; + return ""; +} + +const char *sata_spd_string(unsigned int spd) +{ + static const char * const spd_str[] = { + "1.5 Gbps", + "3.0 Gbps", + "6.0 Gbps", + }; + + if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str)) + return ""; + return spd_str[spd - 1]; +} + +/** + * ata_dev_classify - determine device type based on ATA-spec signature + * @tf: ATA taskfile register set for device to be identified + * + * Determine from taskfile register contents whether a device is + * ATA or ATAPI, as per "Signature and persistence" section + * of ATA/PI spec (volume 1, sect 5.14). + * + * LOCKING: + * None. + * + * RETURNS: + * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, %ATA_DEV_PMP, + * %ATA_DEV_ZAC, or %ATA_DEV_UNKNOWN the event of failure. + */ +unsigned int ata_dev_classify(const struct ata_taskfile *tf) +{ + /* Apple's open source Darwin code hints that some devices only + * put a proper signature into the LBA mid/high registers, + * So, we only check those. It's sufficient for uniqueness. + * + * ATA/ATAPI-7 (d1532v1r1: Feb. 19, 2003) specified separate + * signatures for ATA and ATAPI devices attached on SerialATA, + * 0x3c/0xc3 and 0x69/0x96 respectively. However, SerialATA + * spec has never mentioned about using different signatures + * for ATA/ATAPI devices. Then, Serial ATA II: Port + * Multiplier specification began to use 0x69/0x96 to identify + * port multpliers and 0x3c/0xc3 to identify SEMB device. + * ATA/ATAPI-7 dropped descriptions about 0x3c/0xc3 and + * 0x69/0x96 shortly and described them as reserved for + * SerialATA. + * + * We follow the current spec and consider that 0x69/0x96 + * identifies a port multiplier and 0x3c/0xc3 a SEMB device. + * Unfortunately, WDC WD1600JS-62MHB5 (a hard drive) reports + * SEMB signature. This is worked around in + * ata_dev_read_id(). + */ + if ((tf->lbam == 0) && (tf->lbah == 0)) { + DPRINTK("found ATA device by sig\n"); + return ATA_DEV_ATA; + } + + if ((tf->lbam == 0x14) && (tf->lbah == 0xeb)) { + DPRINTK("found ATAPI device by sig\n"); + return ATA_DEV_ATAPI; + } + + if ((tf->lbam == 0x69) && (tf->lbah == 0x96)) { + DPRINTK("found PMP device by sig\n"); + return ATA_DEV_PMP; + } + + if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) { + DPRINTK("found SEMB device by sig (could be ATA device)\n"); + return ATA_DEV_SEMB; + } + + if ((tf->lbam == 0xcd) && (tf->lbah == 0xab)) { + DPRINTK("found ZAC device by sig\n"); + return ATA_DEV_ZAC; + } + + DPRINTK("unknown device\n"); + return ATA_DEV_UNKNOWN; +} + +/** + * ata_id_string - Convert IDENTIFY DEVICE page into string + * @id: IDENTIFY DEVICE results we will examine + * @s: string into which data is output + * @ofs: offset into identify device page + * @len: length of string to return. must be an even number. + * + * The strings in the IDENTIFY DEVICE page are broken up into + * 16-bit chunks. Run through the string, and output each + * 8-bit chunk linearly, regardless of platform. + * + * LOCKING: + * caller. + */ + +void ata_id_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) +{ + unsigned int c; + + BUG_ON(len & 1); + + while (len > 0) { + c = id[ofs] >> 8; + *s = c; + s++; + + c = id[ofs] & 0xff; + *s = c; + s++; + + ofs++; + len -= 2; + } +} + +/** + * ata_id_c_string - Convert IDENTIFY DEVICE page into C string + * @id: IDENTIFY DEVICE results we will examine + * @s: string into which data is output + * @ofs: offset into identify device page + * @len: length of string to return. must be an odd number. + * + * This function is identical to ata_id_string except that it + * trims trailing spaces and terminates the resulting string with + * null. @len must be actual maximum length (even number) + 1. + * + * LOCKING: + * caller. + */ +void ata_id_c_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) +{ + unsigned char *p; + + ata_id_string(id, s, ofs, len - 1); + + p = s + strnlen(s, len - 1); + while (p > s && p[-1] == ' ') + p--; + *p = '\0'; +} + +static u64 ata_id_n_sectors(const u16 *id) +{ + if (ata_id_has_lba(id)) { + if (ata_id_has_lba48(id)) + return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2); + else + return ata_id_u32(id, ATA_ID_LBA_CAPACITY); + } else { + if (ata_id_current_chs_valid(id)) + return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] * + id[ATA_ID_CUR_SECTORS]; + else + return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] * + id[ATA_ID_SECTORS]; + } +} + +u64 ata_tf_to_lba48(const struct ata_taskfile *tf) +{ + u64 sectors = 0; + + sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40; + sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32; + sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24; + sectors |= (tf->lbah & 0xff) << 16; + sectors |= (tf->lbam & 0xff) << 8; + sectors |= (tf->lbal & 0xff); + + return sectors; +} + +u64 ata_tf_to_lba(const struct ata_taskfile *tf) +{ + u64 sectors = 0; + + sectors |= (tf->device & 0x0f) << 24; + sectors |= (tf->lbah & 0xff) << 16; + sectors |= (tf->lbam & 0xff) << 8; + sectors |= (tf->lbal & 0xff); + + return sectors; +} + +/** + * ata_read_native_max_address - Read native max address + * @dev: target device + * @max_sectors: out parameter for the result native max address + * + * Perform an LBA48 or LBA28 native size query upon the device in + * question. + * + * RETURNS: + * 0 on success, -EACCES if command is aborted by the drive. + * -EIO on other errors. + */ +static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors) +{ + unsigned int err_mask; + struct ata_taskfile tf; + int lba48 = ata_id_has_lba48(dev->id); + + ata_tf_init(dev, &tf); + + /* always clear all address registers */ + tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + + if (lba48) { + tf.command = ATA_CMD_READ_NATIVE_MAX_EXT; + tf.flags |= ATA_TFLAG_LBA48; + } else + tf.command = ATA_CMD_READ_NATIVE_MAX; + + tf.protocol |= ATA_PROT_NODATA; + tf.device |= ATA_LBA; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + if (err_mask) { + ata_dev_warn(dev, + "failed to read native max address (err_mask=0x%x)\n", + err_mask); + if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED)) + return -EACCES; + return -EIO; + } + + if (lba48) + *max_sectors = ata_tf_to_lba48(&tf) + 1; + else + *max_sectors = ata_tf_to_lba(&tf) + 1; + if (dev->horkage & ATA_HORKAGE_HPA_SIZE) + (*max_sectors)--; + return 0; +} + +/** + * ata_set_max_sectors - Set max sectors + * @dev: target device + * @new_sectors: new max sectors value to set for the device + * + * Set max sectors of @dev to @new_sectors. + * + * RETURNS: + * 0 on success, -EACCES if command is aborted or denied (due to + * previous non-volatile SET_MAX) by the drive. -EIO on other + * errors. + */ +static int ata_set_max_sectors(struct ata_device *dev, u64 new_sectors) +{ + unsigned int err_mask; + struct ata_taskfile tf; + int lba48 = ata_id_has_lba48(dev->id); + + new_sectors--; + + ata_tf_init(dev, &tf); + + tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + + if (lba48) { + tf.command = ATA_CMD_SET_MAX_EXT; + tf.flags |= ATA_TFLAG_LBA48; + + tf.hob_lbal = (new_sectors >> 24) & 0xff; + tf.hob_lbam = (new_sectors >> 32) & 0xff; + tf.hob_lbah = (new_sectors >> 40) & 0xff; + } else { + tf.command = ATA_CMD_SET_MAX; + + tf.device |= (new_sectors >> 24) & 0xf; + } + + tf.protocol |= ATA_PROT_NODATA; + tf.device |= ATA_LBA; + + tf.lbal = (new_sectors >> 0) & 0xff; + tf.lbam = (new_sectors >> 8) & 0xff; + tf.lbah = (new_sectors >> 16) & 0xff; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + if (err_mask) { + ata_dev_warn(dev, + "failed to set max address (err_mask=0x%x)\n", + err_mask); + if (err_mask == AC_ERR_DEV && + (tf.feature & (ATA_ABORTED | ATA_IDNF))) + return -EACCES; + return -EIO; + } + + return 0; +} + +/** + * ata_hpa_resize - Resize a device with an HPA set + * @dev: Device to resize + * + * Read the size of an LBA28 or LBA48 disk with HPA features and resize + * it if required to the full size of the media. The caller must check + * the drive has the HPA feature set enabled. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int ata_hpa_resize(struct ata_device *dev) +{ + struct ata_eh_context *ehc = &dev->link->eh_context; + int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; + bool unlock_hpa = ata_ignore_hpa || dev->flags & ATA_DFLAG_UNLOCK_HPA; + u64 sectors = ata_id_n_sectors(dev->id); + u64 native_sectors; + int rc; + + /* do we need to do it? */ + if ((dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ZAC) || + !ata_id_has_lba(dev->id) || !ata_id_hpa_enabled(dev->id) || + (dev->horkage & ATA_HORKAGE_BROKEN_HPA)) + return 0; + + /* read native max address */ + rc = ata_read_native_max_address(dev, &native_sectors); + if (rc) { + /* If device aborted the command or HPA isn't going to + * be unlocked, skip HPA resizing. + */ + if (rc == -EACCES || !unlock_hpa) { + ata_dev_warn(dev, + "HPA support seems broken, skipping HPA handling\n"); + dev->horkage |= ATA_HORKAGE_BROKEN_HPA; + + /* we can continue if device aborted the command */ + if (rc == -EACCES) + rc = 0; + } + + return rc; + } + dev->n_native_sectors = native_sectors; + + /* nothing to do? */ + if (native_sectors <= sectors || !unlock_hpa) { + if (!print_info || native_sectors == sectors) + return 0; + + if (native_sectors > sectors) + ata_dev_info(dev, + "HPA detected: current %llu, native %llu\n", + (unsigned long long)sectors, + (unsigned long long)native_sectors); + else if (native_sectors < sectors) + ata_dev_warn(dev, + "native sectors (%llu) is smaller than sectors (%llu)\n", + (unsigned long long)native_sectors, + (unsigned long long)sectors); + return 0; + } + + /* let's unlock HPA */ + rc = ata_set_max_sectors(dev, native_sectors); + if (rc == -EACCES) { + /* if device aborted the command, skip HPA resizing */ + ata_dev_warn(dev, + "device aborted resize (%llu -> %llu), skipping HPA handling\n", + (unsigned long long)sectors, + (unsigned long long)native_sectors); + dev->horkage |= ATA_HORKAGE_BROKEN_HPA; + return 0; + } else if (rc) + return rc; + + /* re-read IDENTIFY data */ + rc = ata_dev_reread_id(dev, 0); + if (rc) { + ata_dev_err(dev, + "failed to re-read IDENTIFY data after HPA resizing\n"); + return rc; + } + + if (print_info) { + u64 new_sectors = ata_id_n_sectors(dev->id); + ata_dev_info(dev, + "HPA unlocked: %llu -> %llu, native %llu\n", + (unsigned long long)sectors, + (unsigned long long)new_sectors, + (unsigned long long)native_sectors); + } + + return 0; +} + +/** + * ata_dump_id - IDENTIFY DEVICE info debugging output + * @id: IDENTIFY DEVICE page to dump + * + * Dump selected 16-bit words from the given IDENTIFY DEVICE + * page. + * + * LOCKING: + * caller. + */ + +static inline void ata_dump_id(const u16 *id) +{ + DPRINTK("49==0x%04x " + "53==0x%04x " + "63==0x%04x " + "64==0x%04x " + "75==0x%04x \n", + id[49], + id[53], + id[63], + id[64], + id[75]); + DPRINTK("80==0x%04x " + "81==0x%04x " + "82==0x%04x " + "83==0x%04x " + "84==0x%04x \n", + id[80], + id[81], + id[82], + id[83], + id[84]); + DPRINTK("88==0x%04x " + "93==0x%04x\n", + id[88], + id[93]); +} + +/** + * ata_id_xfermask - Compute xfermask from the given IDENTIFY data + * @id: IDENTIFY data to compute xfer mask from + * + * Compute the xfermask for this device. This is not as trivial + * as it seems if we must consider early devices correctly. + * + * FIXME: pre IDE drive timing (do we care ?). + * + * LOCKING: + * None. + * + * RETURNS: + * Computed xfermask + */ +unsigned long ata_id_xfermask(const u16 *id) +{ + unsigned long pio_mask, mwdma_mask, udma_mask; + + /* Usual case. Word 53 indicates word 64 is valid */ + if (id[ATA_ID_FIELD_VALID] & (1 << 1)) { + pio_mask = id[ATA_ID_PIO_MODES] & 0x03; + pio_mask <<= 3; + pio_mask |= 0x7; + } else { + /* If word 64 isn't valid then Word 51 high byte holds + * the PIO timing number for the maximum. Turn it into + * a mask. + */ + u8 mode = (id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF; + if (mode < 5) /* Valid PIO range */ + pio_mask = (2 << mode) - 1; + else + pio_mask = 1; + + /* But wait.. there's more. Design your standards by + * committee and you too can get a free iordy field to + * process. However its the speeds not the modes that + * are supported... Note drivers using the timing API + * will get this right anyway + */ + } + + mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07; + + if (ata_id_is_cfa(id)) { + /* + * Process compact flash extended modes + */ + int pio = (id[ATA_ID_CFA_MODES] >> 0) & 0x7; + int dma = (id[ATA_ID_CFA_MODES] >> 3) & 0x7; + + if (pio) + pio_mask |= (1 << 5); + if (pio > 1) + pio_mask |= (1 << 6); + if (dma) + mwdma_mask |= (1 << 3); + if (dma > 1) + mwdma_mask |= (1 << 4); + } + + udma_mask = 0; + if (id[ATA_ID_FIELD_VALID] & (1 << 2)) + udma_mask = id[ATA_ID_UDMA_MODES] & 0xff; + + return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); +} + +static void ata_qc_complete_internal(struct ata_queued_cmd *qc) +{ + struct completion *waiting = qc->private_data; + + complete(waiting); +} + +/** + * ata_exec_internal_sg - execute libata internal command + * @dev: Device to which the command is sent + * @tf: Taskfile registers for the command and the result + * @cdb: CDB for packet command + * @dma_dir: Data transfer direction of the command + * @sgl: sg list for the data buffer of the command + * @n_elem: Number of sg entries + * @timeout: Timeout in msecs (0 for default) + * + * Executes libata internal command with timeout. @tf contains + * command on entry and result on return. Timeout and error + * conditions are reported via return value. No recovery action + * is taken after a command times out. It's caller's duty to + * clean up after timeout. + * + * LOCKING: + * None. Should be called with kernel context, might sleep. + * + * RETURNS: + * Zero on success, AC_ERR_* mask on failure + */ +unsigned ata_exec_internal_sg(struct ata_device *dev, + struct ata_taskfile *tf, const u8 *cdb, + int dma_dir, struct scatterlist *sgl, + unsigned int n_elem, unsigned long timeout) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + u8 command = tf->command; + int auto_timeout = 0; + struct ata_queued_cmd *qc; + unsigned int tag, preempted_tag; + u32 preempted_sactive, preempted_qc_active; + int preempted_nr_active_links; + DECLARE_COMPLETION_ONSTACK(wait); + unsigned long flags; + unsigned int err_mask; + int rc; + + spin_lock_irqsave(ap->lock, flags); + + /* no internal command while frozen */ + if (ap->pflags & ATA_PFLAG_FROZEN) { + spin_unlock_irqrestore(ap->lock, flags); + return AC_ERR_SYSTEM; + } + + /* initialize internal qc */ + + /* XXX: Tag 0 is used for drivers with legacy EH as some + * drivers choke if any other tag is given. This breaks + * ata_tag_internal() test for those drivers. Don't use new + * EH stuff without converting to it. + */ + if (ap->ops->error_handler) + tag = ATA_TAG_INTERNAL; + else + tag = 0; + + qc = __ata_qc_from_tag(ap, tag); + + qc->tag = tag; + qc->scsicmd = NULL; + qc->ap = ap; + qc->dev = dev; + ata_qc_reinit(qc); + + preempted_tag = link->active_tag; + preempted_sactive = link->sactive; + preempted_qc_active = ap->qc_active; + preempted_nr_active_links = ap->nr_active_links; + link->active_tag = ATA_TAG_POISON; + link->sactive = 0; + ap->qc_active = 0; + ap->nr_active_links = 0; + + /* prepare & issue qc */ + qc->tf = *tf; + if (cdb) + memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); + + /* some SATA bridges need us to indicate data xfer direction */ + if (tf->protocol == ATAPI_PROT_DMA && (dev->flags & ATA_DFLAG_DMADIR) && + dma_dir == DMA_FROM_DEVICE) + qc->tf.feature |= ATAPI_DMADIR; + + qc->flags |= ATA_QCFLAG_RESULT_TF; + qc->dma_dir = dma_dir; + if (dma_dir != DMA_NONE) { + unsigned int i, buflen = 0; + struct scatterlist *sg; + + for_each_sg(sgl, sg, n_elem, i) + buflen += sg->length; + + ata_sg_init(qc, sgl, n_elem); + qc->nbytes = buflen; + } + + qc->private_data = &wait; + qc->complete_fn = ata_qc_complete_internal; + + ata_qc_issue(qc); + + spin_unlock_irqrestore(ap->lock, flags); + + if (!timeout) { + if (ata_probe_timeout) + timeout = ata_probe_timeout * 1000; + else { + timeout = ata_internal_cmd_timeout(dev, command); + auto_timeout = 1; + } + } + + if (ap->ops->error_handler) + ata_eh_release(ap); + + rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout)); + + if (ap->ops->error_handler) + ata_eh_acquire(ap); + + ata_sff_flush_pio_task(ap); + + if (!rc) { + spin_lock_irqsave(ap->lock, flags); + + /* We're racing with irq here. If we lose, the + * following test prevents us from completing the qc + * twice. If we win, the port is frozen and will be + * cleaned up by ->post_internal_cmd(). + */ + if (qc->flags & ATA_QCFLAG_ACTIVE) { + qc->err_mask |= AC_ERR_TIMEOUT; + + if (ap->ops->error_handler) + ata_port_freeze(ap); + else + ata_qc_complete(qc); + + if (ata_msg_warn(ap)) + ata_dev_warn(dev, "qc timeout (cmd 0x%x)\n", + command); + } + + spin_unlock_irqrestore(ap->lock, flags); + } + + /* do post_internal_cmd */ + if (ap->ops->post_internal_cmd) + ap->ops->post_internal_cmd(qc); + + /* perform minimal error analysis */ + if (qc->flags & ATA_QCFLAG_FAILED) { + if (qc->result_tf.command & (ATA_ERR | ATA_DF)) + qc->err_mask |= AC_ERR_DEV; + + if (!qc->err_mask) + qc->err_mask |= AC_ERR_OTHER; + + if (qc->err_mask & ~AC_ERR_OTHER) + qc->err_mask &= ~AC_ERR_OTHER; + } + + /* finish up */ + spin_lock_irqsave(ap->lock, flags); + + *tf = qc->result_tf; + err_mask = qc->err_mask; + + ata_qc_free(qc); + link->active_tag = preempted_tag; + link->sactive = preempted_sactive; + ap->qc_active = preempted_qc_active; + ap->nr_active_links = preempted_nr_active_links; + + spin_unlock_irqrestore(ap->lock, flags); + + if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout) + ata_internal_cmd_timed_out(dev, command); + + return err_mask; +} + +/** + * ata_exec_internal - execute libata internal command + * @dev: Device to which the command is sent + * @tf: Taskfile registers for the command and the result + * @cdb: CDB for packet command + * @dma_dir: Data transfer direction of the command + * @buf: Data buffer of the command + * @buflen: Length of data buffer + * @timeout: Timeout in msecs (0 for default) + * + * Wrapper around ata_exec_internal_sg() which takes simple + * buffer instead of sg list. + * + * LOCKING: + * None. Should be called with kernel context, might sleep. + * + * RETURNS: + * Zero on success, AC_ERR_* mask on failure + */ +unsigned ata_exec_internal(struct ata_device *dev, + struct ata_taskfile *tf, const u8 *cdb, + int dma_dir, void *buf, unsigned int buflen, + unsigned long timeout) +{ + struct scatterlist *psg = NULL, sg; + unsigned int n_elem = 0; + + if (dma_dir != DMA_NONE) { + WARN_ON(!buf); + sg_init_one(&sg, buf, buflen); + psg = &sg; + n_elem++; + } + + return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem, + timeout); +} + +/** + * ata_pio_need_iordy - check if iordy needed + * @adev: ATA device + * + * Check if the current speed of the device requires IORDY. Used + * by various controllers for chip configuration. + */ +unsigned int ata_pio_need_iordy(const struct ata_device *adev) +{ + /* Don't set IORDY if we're preparing for reset. IORDY may + * lead to controller lock up on certain controllers if the + * port is not occupied. See bko#11703 for details. + */ + if (adev->link->ap->pflags & ATA_PFLAG_RESETTING) + return 0; + /* Controller doesn't support IORDY. Probably a pointless + * check as the caller should know this. + */ + if (adev->link->ap->flags & ATA_FLAG_NO_IORDY) + return 0; + /* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6. */ + if (ata_id_is_cfa(adev->id) + && (adev->pio_mode == XFER_PIO_5 || adev->pio_mode == XFER_PIO_6)) + return 0; + /* PIO3 and higher it is mandatory */ + if (adev->pio_mode > XFER_PIO_2) + return 1; + /* We turn it on when possible */ + if (ata_id_has_iordy(adev->id)) + return 1; + return 0; +} + +/** + * ata_pio_mask_no_iordy - Return the non IORDY mask + * @adev: ATA device + * + * Compute the highest mode possible if we are not using iordy. Return + * -1 if no iordy mode is available. + */ +static u32 ata_pio_mask_no_iordy(const struct ata_device *adev) +{ + /* If we have no drive specific rule, then PIO 2 is non IORDY */ + if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */ + u16 pio = adev->id[ATA_ID_EIDE_PIO]; + /* Is the speed faster than the drive allows non IORDY ? */ + if (pio) { + /* This is cycle times not frequency - watch the logic! */ + if (pio > 240) /* PIO2 is 240nS per cycle */ + return 3 << ATA_SHIFT_PIO; + return 7 << ATA_SHIFT_PIO; + } + } + return 3 << ATA_SHIFT_PIO; +} + +/** + * ata_do_dev_read_id - default ID read method + * @dev: device + * @tf: proposed taskfile + * @id: data buffer + * + * Issue the identify taskfile and hand back the buffer containing + * identify data. For some RAID controllers and for pre ATA devices + * this function is wrapped or replaced by the driver + */ +unsigned int ata_do_dev_read_id(struct ata_device *dev, + struct ata_taskfile *tf, u16 *id) +{ + return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE, + id, sizeof(id[0]) * ATA_ID_WORDS, 0); +} + +/** + * ata_dev_read_id - Read ID data from the specified device + * @dev: target device + * @p_class: pointer to class of the target device (may be changed) + * @flags: ATA_READID_* flags + * @id: buffer to read IDENTIFY data into + * + * Read ID data from the specified device. ATA_CMD_ID_ATA is + * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI + * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS + * for pre-ATA4 drives. + * + * FIXME: ATA_CMD_ID_ATA is optional for early drives and right + * now we abort if we hit that case. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, + unsigned int flags, u16 *id) +{ + struct ata_port *ap = dev->link->ap; + unsigned int class = *p_class; + struct ata_taskfile tf; + unsigned int err_mask = 0; + const char *reason; + bool is_semb = class == ATA_DEV_SEMB; + int may_fallback = 1, tried_spinup = 0; + int rc; + + if (ata_msg_ctl(ap)) + ata_dev_dbg(dev, "%s: ENTER\n", __func__); + +retry: + ata_tf_init(dev, &tf); + + switch (class) { + case ATA_DEV_SEMB: + class = ATA_DEV_ATA; /* some hard drives report SEMB sig */ + case ATA_DEV_ATA: + case ATA_DEV_ZAC: + tf.command = ATA_CMD_ID_ATA; + break; + case ATA_DEV_ATAPI: + tf.command = ATA_CMD_ID_ATAPI; + break; + default: + rc = -ENODEV; + reason = "unsupported class"; + goto err_out; + } + + tf.protocol = ATA_PROT_PIO; + + /* Some devices choke if TF registers contain garbage. Make + * sure those are properly initialized. + */ + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + + /* Device presence detection is unreliable on some + * controllers. Always poll IDENTIFY if available. + */ + tf.flags |= ATA_TFLAG_POLLING; + + if (ap->ops->read_id) + err_mask = ap->ops->read_id(dev, &tf, id); + else + err_mask = ata_do_dev_read_id(dev, &tf, id); + + if (err_mask) { + if (err_mask & AC_ERR_NODEV_HINT) { + ata_dev_dbg(dev, "NODEV after polling detection\n"); + return -ENOENT; + } + + if (is_semb) { + ata_dev_info(dev, + "IDENTIFY failed on device w/ SEMB sig, disabled\n"); + /* SEMB is not supported yet */ + *p_class = ATA_DEV_SEMB_UNSUP; + return 0; + } + + if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) { + /* Device or controller might have reported + * the wrong device class. Give a shot at the + * other IDENTIFY if the current one is + * aborted by the device. + */ + if (may_fallback) { + may_fallback = 0; + + if (class == ATA_DEV_ATA) + class = ATA_DEV_ATAPI; + else + class = ATA_DEV_ATA; + goto retry; + } + + /* Control reaches here iff the device aborted + * both flavors of IDENTIFYs which happens + * sometimes with phantom devices. + */ + ata_dev_dbg(dev, + "both IDENTIFYs aborted, assuming NODEV\n"); + return -ENOENT; + } + + rc = -EIO; + reason = "I/O error"; + goto err_out; + } + + if (dev->horkage & ATA_HORKAGE_DUMP_ID) { + ata_dev_dbg(dev, "dumping IDENTIFY data, " + "class=%d may_fallback=%d tried_spinup=%d\n", + class, may_fallback, tried_spinup); + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, + 16, 2, id, ATA_ID_WORDS * sizeof(*id), true); + } + + /* Falling back doesn't make sense if ID data was read + * successfully at least once. + */ + may_fallback = 0; + + swap_buf_le16(id, ATA_ID_WORDS); + + /* sanity check */ + rc = -EINVAL; + reason = "device reports invalid type"; + + if (class == ATA_DEV_ATA || class == ATA_DEV_ZAC) { + if (!ata_id_is_ata(id) && !ata_id_is_cfa(id)) + goto err_out; + if (ap->host->flags & ATA_HOST_IGNORE_ATA && + ata_id_is_ata(id)) { + ata_dev_dbg(dev, + "host indicates ignore ATA devices, ignored\n"); + return -ENOENT; + } + } else { + if (ata_id_is_ata(id)) + goto err_out; + } + + if (!tried_spinup && (id[2] == 0x37c8 || id[2] == 0x738c)) { + tried_spinup = 1; + /* + * Drive powered-up in standby mode, and requires a specific + * SET_FEATURES spin-up subcommand before it will accept + * anything other than the original IDENTIFY command. + */ + err_mask = ata_dev_set_feature(dev, SETFEATURES_SPINUP, 0); + if (err_mask && id[2] != 0x738c) { + rc = -EIO; + reason = "SPINUP failed"; + goto err_out; + } + /* + * If the drive initially returned incomplete IDENTIFY info, + * we now must reissue the IDENTIFY command. + */ + if (id[2] == 0x37c8) + goto retry; + } + + if ((flags & ATA_READID_POSTRESET) && + (class == ATA_DEV_ATA || class == ATA_DEV_ZAC)) { + /* + * The exact sequence expected by certain pre-ATA4 drives is: + * SRST RESET + * IDENTIFY (optional in early ATA) + * INITIALIZE DEVICE PARAMETERS (later IDE and ATA) + * anything else.. + * Some drives were very specific about that exact sequence. + * + * Note that ATA4 says lba is mandatory so the second check + * should never trigger. + */ + if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { + err_mask = ata_dev_init_params(dev, id[3], id[6]); + if (err_mask) { + rc = -EIO; + reason = "INIT_DEV_PARAMS failed"; + goto err_out; + } + + /* current CHS translation info (id[53-58]) might be + * changed. reread the identify device info. + */ + flags &= ~ATA_READID_POSTRESET; + goto retry; + } + } + + if (id[79] & (1 << SATA_DIPM)) + dev->init_dipm = true; + + *p_class = class; + + return 0; + + err_out: + if (ata_msg_warn(ap)) + ata_dev_warn(dev, "failed to IDENTIFY (%s, err_mask=0x%x)\n", + reason, err_mask); + return rc; +} + +static int ata_do_link_spd_horkage(struct ata_device *dev) +{ + struct ata_link *plink = ata_dev_phys_link(dev); + u32 target, target_limit; + + if (!sata_scr_valid(plink)) + return 0; + + if (dev->horkage & ATA_HORKAGE_1_5_GBPS) + target = 1; + else + return 0; + + target_limit = (1 << target) - 1; + + /* if already on stricter limit, no need to push further */ + if (plink->sata_spd_limit <= target_limit) + return 0; + + plink->sata_spd_limit = target_limit; + + /* Request another EH round by returning -EAGAIN if link is + * going faster than the target speed. Forward progress is + * guaranteed by setting sata_spd_limit to target_limit above. + */ + if (plink->sata_spd > target) { + ata_dev_info(dev, "applying link speed limit horkage to %s\n", + sata_spd_string(target)); + return -EAGAIN; + } + return 0; +} + +static inline u8 ata_dev_knobble(struct ata_device *dev) +{ + struct ata_port *ap = dev->link->ap; + + if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK) + return 0; + + return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); +} + +static int ata_dev_config_ncq(struct ata_device *dev, + char *desc, size_t desc_sz) +{ + struct ata_port *ap = dev->link->ap; + int hdepth = 0, ddepth = ata_id_queue_depth(dev->id); + unsigned int err_mask; + char *aa_desc = ""; + + if (!ata_id_has_ncq(dev->id)) { + desc[0] = '\0'; + return 0; + } + if (dev->horkage & ATA_HORKAGE_NONCQ) { + snprintf(desc, desc_sz, "NCQ (not used)"); + return 0; + } + if (ap->flags & ATA_FLAG_NCQ) { + hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1); + dev->flags |= ATA_DFLAG_NCQ; + } + + if (!(dev->horkage & ATA_HORKAGE_BROKEN_FPDMA_AA) && + (ap->flags & ATA_FLAG_FPDMA_AA) && + ata_id_has_fpdma_aa(dev->id)) { + err_mask = ata_dev_set_feature(dev, SETFEATURES_SATA_ENABLE, + SATA_FPDMA_AA); + if (err_mask) { + ata_dev_err(dev, + "failed to enable AA (error_mask=0x%x)\n", + err_mask); + if (err_mask != AC_ERR_DEV) { + dev->horkage |= ATA_HORKAGE_BROKEN_FPDMA_AA; + return -EIO; + } + } else + aa_desc = ", AA"; + } + + if (hdepth >= ddepth) + snprintf(desc, desc_sz, "NCQ (depth %d)%s", ddepth, aa_desc); + else + snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth, + ddepth, aa_desc); + + if ((ap->flags & ATA_FLAG_FPDMA_AUX) && + ata_id_has_ncq_send_and_recv(dev->id)) { + err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_SEND_RECV, + 0, ap->sector_buf, 1); + if (err_mask) { + ata_dev_dbg(dev, + "failed to get NCQ Send/Recv Log Emask 0x%x\n", + err_mask); + } else { + u8 *cmds = dev->ncq_send_recv_cmds; + + dev->flags |= ATA_DFLAG_NCQ_SEND_RECV; + memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_SEND_RECV_SIZE); + + if (dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM) { + ata_dev_dbg(dev, "disabling queued TRIM support\n"); + cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &= + ~ATA_LOG_NCQ_SEND_RECV_DSM_TRIM; + } + } + } + + return 0; +} + +static void ata_dev_config_sense_reporting(struct ata_device *dev) +{ + unsigned int err_mask; + + if (!ata_id_has_sense_reporting(dev->id)) + return; + + if (ata_id_sense_reporting_enabled(dev->id)) + return; + + err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1); + if (err_mask) { + ata_dev_dbg(dev, + "failed to enable Sense Data Reporting, Emask 0x%x\n", + err_mask); + } +} + +/** + * ata_dev_configure - Configure the specified ATA/ATAPI device + * @dev: Target device to configure + * + * Configure @dev according to @dev->id. Generic and low-level + * driver specific fixups are also applied. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise + */ +int ata_dev_configure(struct ata_device *dev) +{ + struct ata_port *ap = dev->link->ap; + struct ata_eh_context *ehc = &dev->link->eh_context; + int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; + const u16 *id = dev->id; + unsigned long xfer_mask; + unsigned int err_mask; + char revbuf[7]; /* XYZ-99\0 */ + char fwrevbuf[ATA_ID_FW_REV_LEN+1]; + char modelbuf[ATA_ID_PROD_LEN+1]; + int rc; + + if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { + ata_dev_info(dev, "%s: ENTER/EXIT -- nodev\n", __func__); + return 0; + } + + if (ata_msg_probe(ap)) + ata_dev_dbg(dev, "%s: ENTER\n", __func__); + + /* set horkage */ + dev->horkage |= ata_dev_blacklisted(dev); + ata_force_horkage(dev); + + if (dev->horkage & ATA_HORKAGE_DISABLE) { + ata_dev_info(dev, "unsupported device, disabling\n"); + ata_dev_disable(dev); + return 0; + } + + if ((!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) && + dev->class == ATA_DEV_ATAPI) { + ata_dev_warn(dev, "WARNING: ATAPI is %s, device ignored\n", + atapi_enabled ? "not supported with this driver" + : "disabled"); + ata_dev_disable(dev); + return 0; + } + + rc = ata_do_link_spd_horkage(dev); + if (rc) + return rc; + + /* some WD SATA-1 drives have issues with LPM, turn on NOLPM for them */ + if ((dev->horkage & ATA_HORKAGE_WD_BROKEN_LPM) && + (id[ATA_ID_SATA_CAPABILITY] & 0xe) == 0x2) + dev->horkage |= ATA_HORKAGE_NOLPM; + + if (dev->horkage & ATA_HORKAGE_NOLPM) { + ata_dev_warn(dev, "LPM support broken, forcing max_power\n"); + dev->link->ap->target_lpm_policy = ATA_LPM_MAX_POWER; + } + + /* let ACPI work its magic */ + rc = ata_acpi_on_devcfg(dev); + if (rc) + return rc; + + /* massage HPA, do it early as it might change IDENTIFY data */ + rc = ata_hpa_resize(dev); + if (rc) + return rc; + + /* print device capabilities */ + if (ata_msg_probe(ap)) + ata_dev_dbg(dev, + "%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x " + "85:%04x 86:%04x 87:%04x 88:%04x\n", + __func__, + id[49], id[82], id[83], id[84], + id[85], id[86], id[87], id[88]); + + /* initialize to-be-configured parameters */ + dev->flags &= ~ATA_DFLAG_CFG_MASK; + dev->max_sectors = 0; + dev->cdb_len = 0; + dev->n_sectors = 0; + dev->cylinders = 0; + dev->heads = 0; + dev->sectors = 0; + dev->multi_count = 0; + + /* + * common ATA, ATAPI feature tests + */ + + /* find max transfer mode; for printk only */ + xfer_mask = ata_id_xfermask(id); + + if (ata_msg_probe(ap)) + ata_dump_id(id); + + /* SCSI only uses 4-char revisions, dump full 8 chars from ATA */ + ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV, + sizeof(fwrevbuf)); + + ata_id_c_string(dev->id, modelbuf, ATA_ID_PROD, + sizeof(modelbuf)); + + /* ATA-specific feature tests */ + if (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ZAC) { + if (ata_id_is_cfa(id)) { + /* CPRM may make this media unusable */ + if (id[ATA_ID_CFA_KEY_MGMT] & 1) + ata_dev_warn(dev, + "supports DRM functions and may not be fully accessible\n"); + snprintf(revbuf, 7, "CFA"); + } else { + snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id)); + /* Warn the user if the device has TPM extensions */ + if (ata_id_has_tpm(id)) + ata_dev_warn(dev, + "supports DRM functions and may not be fully accessible\n"); + } + + dev->n_sectors = ata_id_n_sectors(id); + + /* get current R/W Multiple count setting */ + if ((dev->id[47] >> 8) == 0x80 && (dev->id[59] & 0x100)) { + unsigned int max = dev->id[47] & 0xff; + unsigned int cnt = dev->id[59] & 0xff; + /* only recognize/allow powers of two here */ + if (is_power_of_2(max) && is_power_of_2(cnt)) + if (cnt <= max) + dev->multi_count = cnt; + } + + if (ata_id_has_lba(id)) { + const char *lba_desc; + char ncq_desc[24]; + + lba_desc = "LBA"; + dev->flags |= ATA_DFLAG_LBA; + if (ata_id_has_lba48(id)) { + dev->flags |= ATA_DFLAG_LBA48; + lba_desc = "LBA48"; + + if (dev->n_sectors >= (1UL << 28) && + ata_id_has_flush_ext(id)) + dev->flags |= ATA_DFLAG_FLUSH_EXT; + } + + /* config NCQ */ + rc = ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); + if (rc) + return rc; + + /* print device info to dmesg */ + if (ata_msg_drv(ap) && print_info) { + ata_dev_info(dev, "%s: %s, %s, max %s\n", + revbuf, modelbuf, fwrevbuf, + ata_mode_string(xfer_mask)); + ata_dev_info(dev, + "%llu sectors, multi %u: %s %s\n", + (unsigned long long)dev->n_sectors, + dev->multi_count, lba_desc, ncq_desc); + } + } else { + /* CHS */ + + /* Default translation */ + dev->cylinders = id[1]; + dev->heads = id[3]; + dev->sectors = id[6]; + + if (ata_id_current_chs_valid(id)) { + /* Current CHS translation is valid. */ + dev->cylinders = id[54]; + dev->heads = id[55]; + dev->sectors = id[56]; + } + + /* print device info to dmesg */ + if (ata_msg_drv(ap) && print_info) { + ata_dev_info(dev, "%s: %s, %s, max %s\n", + revbuf, modelbuf, fwrevbuf, + ata_mode_string(xfer_mask)); + ata_dev_info(dev, + "%llu sectors, multi %u, CHS %u/%u/%u\n", + (unsigned long long)dev->n_sectors, + dev->multi_count, dev->cylinders, + dev->heads, dev->sectors); + } + } + + /* Check and mark DevSlp capability. Get DevSlp timing variables + * from SATA Settings page of Identify Device Data Log. + */ + if (ata_id_has_devslp(dev->id)) { + u8 *sata_setting = ap->sector_buf; + int i, j; + + dev->flags |= ATA_DFLAG_DEVSLP; + err_mask = ata_read_log_page(dev, + ATA_LOG_SATA_ID_DEV_DATA, + ATA_LOG_SATA_SETTINGS, + sata_setting, + 1); + if (err_mask) + ata_dev_dbg(dev, + "failed to get Identify Device Data, Emask 0x%x\n", + err_mask); + else + for (i = 0; i < ATA_LOG_DEVSLP_SIZE; i++) { + j = ATA_LOG_DEVSLP_OFFSET + i; + dev->devslp_timing[i] = sata_setting[j]; + } + } + ata_dev_config_sense_reporting(dev); + dev->cdb_len = 16; + } + + /* ATAPI-specific feature tests */ + else if (dev->class == ATA_DEV_ATAPI) { + const char *cdb_intr_string = ""; + const char *atapi_an_string = ""; + const char *dma_dir_string = ""; + u32 sntf; + + rc = atapi_cdb_len(id); + if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { + if (ata_msg_warn(ap)) + ata_dev_warn(dev, "unsupported CDB len\n"); + rc = -EINVAL; + goto err_out_nosup; + } + dev->cdb_len = (unsigned int) rc; + + /* Enable ATAPI AN if both the host and device have + * the support. If PMP is attached, SNTF is required + * to enable ATAPI AN to discern between PHY status + * changed notifications and ATAPI ANs. + */ + if (atapi_an && + (ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) && + (!sata_pmp_attached(ap) || + sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) { + /* issue SET feature command to turn this on */ + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_ENABLE, SATA_AN); + if (err_mask) + ata_dev_err(dev, + "failed to enable ATAPI AN (err_mask=0x%x)\n", + err_mask); + else { + dev->flags |= ATA_DFLAG_AN; + atapi_an_string = ", ATAPI AN"; + } + } + + if (ata_id_cdb_intr(dev->id)) { + dev->flags |= ATA_DFLAG_CDB_INTR; + cdb_intr_string = ", CDB intr"; + } + + if (atapi_dmadir || (dev->horkage & ATA_HORKAGE_ATAPI_DMADIR) || atapi_id_dmadir(dev->id)) { + dev->flags |= ATA_DFLAG_DMADIR; + dma_dir_string = ", DMADIR"; + } + + if (ata_id_has_da(dev->id)) { + dev->flags |= ATA_DFLAG_DA; + zpodd_init(dev); + } + + /* print device info to dmesg */ + if (ata_msg_drv(ap) && print_info) + ata_dev_info(dev, + "ATAPI: %s, %s, max %s%s%s%s\n", + modelbuf, fwrevbuf, + ata_mode_string(xfer_mask), + cdb_intr_string, atapi_an_string, + dma_dir_string); + } + + /* determine max_sectors */ + dev->max_sectors = ATA_MAX_SECTORS; + if (dev->flags & ATA_DFLAG_LBA48) + dev->max_sectors = ATA_MAX_SECTORS_LBA48; + + /* Limit PATA drive on SATA cable bridge transfers to udma5, + 200 sectors */ + if (ata_dev_knobble(dev)) { + if (ata_msg_drv(ap) && print_info) + ata_dev_info(dev, "applying bridge limits\n"); + dev->udma_mask &= ATA_UDMA5; + dev->max_sectors = ATA_MAX_SECTORS; + } + + if ((dev->class == ATA_DEV_ATAPI) && + (atapi_command_packet_set(id) == TYPE_TAPE)) { + dev->max_sectors = ATA_MAX_SECTORS_TAPE; + dev->horkage |= ATA_HORKAGE_STUCK_ERR; + } + + if (dev->horkage & ATA_HORKAGE_MAX_SEC_128) + dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, + dev->max_sectors); + + if (dev->horkage & ATA_HORKAGE_MAX_SEC_1024) + dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_1024, + dev->max_sectors); + + if (dev->horkage & ATA_HORKAGE_MAX_SEC_LBA48) + dev->max_sectors = ATA_MAX_SECTORS_LBA48; + + if (ap->ops->dev_config) + ap->ops->dev_config(dev); + + if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) { + /* Let the user know. We don't want to disallow opens for + rescue purposes, or in case the vendor is just a blithering + idiot. Do this after the dev_config call as some controllers + with buggy firmware may want to avoid reporting false device + bugs */ + + if (print_info) { + ata_dev_warn(dev, +"Drive reports diagnostics failure. This may indicate a drive\n"); + ata_dev_warn(dev, +"fault or invalid emulation. Contact drive vendor for information.\n"); + } + } + + if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) { + ata_dev_warn(dev, "WARNING: device requires firmware update to be fully functional\n"); + ata_dev_warn(dev, " contact the vendor or visit http://ata.wiki.kernel.org\n"); + } + + return 0; + +err_out_nosup: + if (ata_msg_probe(ap)) + ata_dev_dbg(dev, "%s: EXIT, err\n", __func__); + return rc; +} + +/** + * ata_cable_40wire - return 40 wire cable type + * @ap: port + * + * Helper method for drivers which want to hardwire 40 wire cable + * detection. + */ + +int ata_cable_40wire(struct ata_port *ap) +{ + return ATA_CBL_PATA40; +} + +/** + * ata_cable_80wire - return 80 wire cable type + * @ap: port + * + * Helper method for drivers which want to hardwire 80 wire cable + * detection. + */ + +int ata_cable_80wire(struct ata_port *ap) +{ + return ATA_CBL_PATA80; +} + +/** + * ata_cable_unknown - return unknown PATA cable. + * @ap: port + * + * Helper method for drivers which have no PATA cable detection. + */ + +int ata_cable_unknown(struct ata_port *ap) +{ + return ATA_CBL_PATA_UNK; +} + +/** + * ata_cable_ignore - return ignored PATA cable. + * @ap: port + * + * Helper method for drivers which don't use cable type to limit + * transfer mode. + */ +int ata_cable_ignore(struct ata_port *ap) +{ + return ATA_CBL_PATA_IGN; +} + +/** + * ata_cable_sata - return SATA cable type + * @ap: port + * + * Helper method for drivers which have SATA cables + */ + +int ata_cable_sata(struct ata_port *ap) +{ + return ATA_CBL_SATA; +} + +/** + * ata_bus_probe - Reset and probe ATA bus + * @ap: Bus to probe + * + * Master ATA bus probing function. Initiates a hardware-dependent + * bus reset, then attempts to identify any devices found on + * the bus. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * Zero on success, negative errno otherwise. + */ + +int ata_bus_probe(struct ata_port *ap) +{ + unsigned int classes[ATA_MAX_DEVICES]; + int tries[ATA_MAX_DEVICES]; + int rc; + struct ata_device *dev; + + ata_for_each_dev(dev, &ap->link, ALL) + tries[dev->devno] = ATA_PROBE_MAX_TRIES; + + retry: + ata_for_each_dev(dev, &ap->link, ALL) { + /* If we issue an SRST then an ATA drive (not ATAPI) + * may change configuration and be in PIO0 timing. If + * we do a hard reset (or are coming from power on) + * this is true for ATA or ATAPI. Until we've set a + * suitable controller mode we should not touch the + * bus as we may be talking too fast. + */ + dev->pio_mode = XFER_PIO_0; + dev->dma_mode = 0xff; + + /* If the controller has a pio mode setup function + * then use it to set the chipset to rights. Don't + * touch the DMA setup as that will be dealt with when + * configuring devices. + */ + if (ap->ops->set_piomode) + ap->ops->set_piomode(ap, dev); + } + + /* reset and determine device classes */ + ap->ops->phy_reset(ap); + + ata_for_each_dev(dev, &ap->link, ALL) { + if (dev->class != ATA_DEV_UNKNOWN) + classes[dev->devno] = dev->class; + else + classes[dev->devno] = ATA_DEV_NONE; + + dev->class = ATA_DEV_UNKNOWN; + } + + /* read IDENTIFY page and configure devices. We have to do the identify + specific sequence bass-ackwards so that PDIAG- is released by + the slave device */ + + ata_for_each_dev(dev, &ap->link, ALL_REVERSE) { + if (tries[dev->devno]) + dev->class = classes[dev->devno]; + + if (!ata_dev_enabled(dev)) + continue; + + rc = ata_dev_read_id(dev, &dev->class, ATA_READID_POSTRESET, + dev->id); + if (rc) + goto fail; + } + + /* Now ask for the cable type as PDIAG- should have been released */ + if (ap->ops->cable_detect) + ap->cbl = ap->ops->cable_detect(ap); + + /* We may have SATA bridge glue hiding here irrespective of + * the reported cable types and sensed types. When SATA + * drives indicate we have a bridge, we don't know which end + * of the link the bridge is which is a problem. + */ + ata_for_each_dev(dev, &ap->link, ENABLED) + if (ata_id_is_sata(dev->id)) + ap->cbl = ATA_CBL_SATA; + + /* After the identify sequence we can now set up the devices. We do + this in the normal order so that the user doesn't get confused */ + + ata_for_each_dev(dev, &ap->link, ENABLED) { + ap->link.eh_context.i.flags |= ATA_EHI_PRINTINFO; + rc = ata_dev_configure(dev); + ap->link.eh_context.i.flags &= ~ATA_EHI_PRINTINFO; + if (rc) + goto fail; + } + + /* configure transfer mode */ + rc = ata_set_mode(&ap->link, &dev); + if (rc) + goto fail; + + ata_for_each_dev(dev, &ap->link, ENABLED) + return 0; + + return -ENODEV; + + fail: + tries[dev->devno]--; + + switch (rc) { + case -EINVAL: + /* eeek, something went very wrong, give up */ + tries[dev->devno] = 0; + break; + + case -ENODEV: + /* give it just one more chance */ + tries[dev->devno] = min(tries[dev->devno], 1); + case -EIO: + if (tries[dev->devno] == 1) { + /* This is the last chance, better to slow + * down than lose it. + */ + sata_down_spd_limit(&ap->link, 0); + ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); + } + } + + if (!tries[dev->devno]) + ata_dev_disable(dev); + + goto retry; +} + +/** + * sata_print_link_status - Print SATA link status + * @link: SATA link to printk link status about + * + * This function prints link speed and status of a SATA link. + * + * LOCKING: + * None. + */ +static void sata_print_link_status(struct ata_link *link) +{ + u32 sstatus, scontrol, tmp; + + if (sata_scr_read(link, SCR_STATUS, &sstatus)) + return; + sata_scr_read(link, SCR_CONTROL, &scontrol); + + if (ata_phys_link_online(link)) { + tmp = (sstatus >> 4) & 0xf; + ata_link_info(link, "SATA link up %s (SStatus %X SControl %X)\n", + sata_spd_string(tmp), sstatus, scontrol); + } else { + ata_link_info(link, "SATA link down (SStatus %X SControl %X)\n", + sstatus, scontrol); + } +} + +/** + * ata_dev_pair - return other device on cable + * @adev: device + * + * Obtain the other device on the same cable, or if none is + * present NULL is returned + */ + +struct ata_device *ata_dev_pair(struct ata_device *adev) +{ + struct ata_link *link = adev->link; + struct ata_device *pair = &link->device[1 - adev->devno]; + if (!ata_dev_enabled(pair)) + return NULL; + return pair; +} + +/** + * sata_down_spd_limit - adjust SATA spd limit downward + * @link: Link to adjust SATA spd limit for + * @spd_limit: Additional limit + * + * Adjust SATA spd limit of @link downward. Note that this + * function only adjusts the limit. The change must be applied + * using sata_set_spd(). + * + * If @spd_limit is non-zero, the speed is limited to equal to or + * lower than @spd_limit if such speed is supported. If + * @spd_limit is slower than any supported speed, only the lowest + * supported speed is allowed. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 0 on success, negative errno on failure + */ +int sata_down_spd_limit(struct ata_link *link, u32 spd_limit) +{ + u32 sstatus, spd, mask; + int rc, bit; + + if (!sata_scr_valid(link)) + return -EOPNOTSUPP; + + /* If SCR can be read, use it to determine the current SPD. + * If not, use cached value in link->sata_spd. + */ + rc = sata_scr_read(link, SCR_STATUS, &sstatus); + if (rc == 0 && ata_sstatus_online(sstatus)) + spd = (sstatus >> 4) & 0xf; + else + spd = link->sata_spd; + + mask = link->sata_spd_limit; + if (mask <= 1) + return -EINVAL; + + /* unconditionally mask off the highest bit */ + bit = fls(mask) - 1; + mask &= ~(1 << bit); + + /* Mask off all speeds higher than or equal to the current + * one. Force 1.5Gbps if current SPD is not available. + */ + if (spd > 1) + mask &= (1 << (spd - 1)) - 1; + else + mask &= 1; + + /* were we already at the bottom? */ + if (!mask) + return -EINVAL; + + if (spd_limit) { + if (mask & ((1 << spd_limit) - 1)) + mask &= (1 << spd_limit) - 1; + else { + bit = ffs(mask) - 1; + mask = 1 << bit; + } + } + + link->sata_spd_limit = mask; + + ata_link_warn(link, "limiting SATA link speed to %s\n", + sata_spd_string(fls(mask))); + + return 0; +} + +static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol) +{ + struct ata_link *host_link = &link->ap->link; + u32 limit, target, spd; + + limit = link->sata_spd_limit; + + /* Don't configure downstream link faster than upstream link. + * It doesn't speed up anything and some PMPs choke on such + * configuration. + */ + if (!ata_is_host_link(link) && host_link->sata_spd) + limit &= (1 << host_link->sata_spd) - 1; + + if (limit == UINT_MAX) + target = 0; + else + target = fls(limit); + + spd = (*scontrol >> 4) & 0xf; + *scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4); + + return spd != target; +} + +/** + * sata_set_spd_needed - is SATA spd configuration needed + * @link: Link in question + * + * Test whether the spd limit in SControl matches + * @link->sata_spd_limit. This function is used to determine + * whether hardreset is necessary to apply SATA spd + * configuration. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 1 if SATA spd configuration is needed, 0 otherwise. + */ +static int sata_set_spd_needed(struct ata_link *link) +{ + u32 scontrol; + + if (sata_scr_read(link, SCR_CONTROL, &scontrol)) + return 1; + + return __sata_set_spd_needed(link, &scontrol); +} + +/** + * sata_set_spd - set SATA spd according to spd limit + * @link: Link to set SATA spd for + * + * Set SATA spd of @link according to sata_spd_limit. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 0 if spd doesn't need to be changed, 1 if spd has been + * changed. Negative errno if SCR registers are inaccessible. + */ +int sata_set_spd(struct ata_link *link) +{ + u32 scontrol; + int rc; + + if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) + return rc; + + if (!__sata_set_spd_needed(link, &scontrol)) + return 0; + + if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) + return rc; + + return 1; +} + +/* + * This mode timing computation functionality is ported over from + * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik + */ +/* + * PIO 0-4, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). + * These were taken from ATA/ATAPI-6 standard, rev 0a, except + * for UDMA6, which is currently supported only by Maxtor drives. + * + * For PIO 5/6 MWDMA 3/4 see the CFA specification 3.0. + */ + +static const struct ata_timing ata_timing[] = { +/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 0, 960, 0 }, */ + { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 0, 600, 0 }, + { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 0, 383, 0 }, + { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 0, 240, 0 }, + { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 0, 180, 0 }, + { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 0, 120, 0 }, + { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 0, 100, 0 }, + { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 0, 80, 0 }, + + { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 50, 960, 0 }, + { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 30, 480, 0 }, + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 20, 240, 0 }, + + { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 20, 480, 0 }, + { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 5, 150, 0 }, + { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 5, 120, 0 }, + { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 5, 100, 0 }, + { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 5, 80, 0 }, + +/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 0, 150 }, */ + { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 0, 120 }, + { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 0, 80 }, + { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 0, 60 }, + { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 0, 45 }, + { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 0, 30 }, + { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 0, 20 }, + { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 0, 15 }, + + { 0xFF } +}; + +#define ENOUGH(v, unit) (((v)-1)/(unit)+1) +#define EZ(v, unit) ((v)?ENOUGH(v, unit):0) + +static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT) +{ + q->setup = EZ(t->setup * 1000, T); + q->act8b = EZ(t->act8b * 1000, T); + q->rec8b = EZ(t->rec8b * 1000, T); + q->cyc8b = EZ(t->cyc8b * 1000, T); + q->active = EZ(t->active * 1000, T); + q->recover = EZ(t->recover * 1000, T); + q->dmack_hold = EZ(t->dmack_hold * 1000, T); + q->cycle = EZ(t->cycle * 1000, T); + q->udma = EZ(t->udma * 1000, UT); +} + +void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, + struct ata_timing *m, unsigned int what) +{ + if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup); + if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); + if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); + if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); + if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active); + if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover); + if (what & ATA_TIMING_DMACK_HOLD) m->dmack_hold = max(a->dmack_hold, b->dmack_hold); + if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); + if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); +} + +const struct ata_timing *ata_timing_find_mode(u8 xfer_mode) +{ + const struct ata_timing *t = ata_timing; + + while (xfer_mode > t->mode) + t++; + + if (xfer_mode == t->mode) + return t; + + WARN_ONCE(true, "%s: unable to find timing for xfer_mode 0x%x\n", + __func__, xfer_mode); + + return NULL; +} + +int ata_timing_compute(struct ata_device *adev, unsigned short speed, + struct ata_timing *t, int T, int UT) +{ + const u16 *id = adev->id; + const struct ata_timing *s; + struct ata_timing p; + + /* + * Find the mode. + */ + + if (!(s = ata_timing_find_mode(speed))) + return -EINVAL; + + memcpy(t, s, sizeof(*s)); + + /* + * If the drive is an EIDE drive, it can tell us it needs extended + * PIO/MW_DMA cycle timing. + */ + + if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ + memset(&p, 0, sizeof(p)); + + if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) { + if (speed <= XFER_PIO_2) + p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO]; + else if ((speed <= XFER_PIO_4) || + (speed == XFER_PIO_5 && !ata_id_is_cfa(id))) + p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY]; + } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) + p.cycle = id[ATA_ID_EIDE_DMA_MIN]; + + ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); + } + + /* + * Convert the timing to bus clock counts. + */ + + ata_timing_quantize(t, t, T, UT); + + /* + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, + * S.M.A.R.T * and some other commands. We have to ensure that the + * DMA cycle timing is slower/equal than the fastest PIO timing. + */ + + if (speed > XFER_PIO_6) { + ata_timing_compute(adev, adev->pio_mode, &p, T, UT); + ata_timing_merge(&p, t, t, ATA_TIMING_ALL); + } + + /* + * Lengthen active & recovery time so that cycle time is correct. + */ + + if (t->act8b + t->rec8b < t->cyc8b) { + t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; + t->rec8b = t->cyc8b - t->act8b; + } + + if (t->active + t->recover < t->cycle) { + t->active += (t->cycle - (t->active + t->recover)) / 2; + t->recover = t->cycle - t->active; + } + + /* In a few cases quantisation may produce enough errors to + leave t->cycle too low for the sum of active and recovery + if so we must correct this */ + if (t->active + t->recover > t->cycle) + t->cycle = t->active + t->recover; + + return 0; +} + +/** + * ata_timing_cycle2mode - find xfer mode for the specified cycle duration + * @xfer_shift: ATA_SHIFT_* value for transfer type to examine. + * @cycle: cycle duration in ns + * + * Return matching xfer mode for @cycle. The returned mode is of + * the transfer type specified by @xfer_shift. If @cycle is too + * slow for @xfer_shift, 0xff is returned. If @cycle is faster + * than the fastest known mode, the fasted mode is returned. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching xfer_mode, 0xff if no match found. + */ +u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle) +{ + u8 base_mode = 0xff, last_mode = 0xff; + const struct ata_xfer_ent *ent; + const struct ata_timing *t; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (ent->shift == xfer_shift) + base_mode = ent->base; + + for (t = ata_timing_find_mode(base_mode); + t && ata_xfer_mode2shift(t->mode) == xfer_shift; t++) { + unsigned short this_cycle; + + switch (xfer_shift) { + case ATA_SHIFT_PIO: + case ATA_SHIFT_MWDMA: + this_cycle = t->cycle; + break; + case ATA_SHIFT_UDMA: + this_cycle = t->udma; + break; + default: + return 0xff; + } + + if (cycle > this_cycle) + break; + + last_mode = t->mode; + } + + return last_mode; +} + +/** + * ata_down_xfermask_limit - adjust dev xfer masks downward + * @dev: Device to adjust xfer masks + * @sel: ATA_DNXFER_* selector + * + * Adjust xfer masks of @dev downward. Note that this function + * does not apply the change. Invoking ata_set_mode() afterwards + * will apply the limit. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 0 on success, negative errno on failure + */ +int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel) +{ + char buf[32]; + unsigned long orig_mask, xfer_mask; + unsigned long pio_mask, mwdma_mask, udma_mask; + int quiet, highbit; + + quiet = !!(sel & ATA_DNXFER_QUIET); + sel &= ~ATA_DNXFER_QUIET; + + xfer_mask = orig_mask = ata_pack_xfermask(dev->pio_mask, + dev->mwdma_mask, + dev->udma_mask); + ata_unpack_xfermask(xfer_mask, &pio_mask, &mwdma_mask, &udma_mask); + + switch (sel) { + case ATA_DNXFER_PIO: + highbit = fls(pio_mask) - 1; + pio_mask &= ~(1 << highbit); + break; + + case ATA_DNXFER_DMA: + if (udma_mask) { + highbit = fls(udma_mask) - 1; + udma_mask &= ~(1 << highbit); + if (!udma_mask) + return -ENOENT; + } else if (mwdma_mask) { + highbit = fls(mwdma_mask) - 1; + mwdma_mask &= ~(1 << highbit); + if (!mwdma_mask) + return -ENOENT; + } + break; + + case ATA_DNXFER_40C: + udma_mask &= ATA_UDMA_MASK_40C; + break; + + case ATA_DNXFER_FORCE_PIO0: + pio_mask &= 1; + case ATA_DNXFER_FORCE_PIO: + mwdma_mask = 0; + udma_mask = 0; + break; + + default: + BUG(); + } + + xfer_mask &= ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); + + if (!(xfer_mask & ATA_MASK_PIO) || xfer_mask == orig_mask) + return -ENOENT; + + if (!quiet) { + if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA)) + snprintf(buf, sizeof(buf), "%s:%s", + ata_mode_string(xfer_mask), + ata_mode_string(xfer_mask & ATA_MASK_PIO)); + else + snprintf(buf, sizeof(buf), "%s", + ata_mode_string(xfer_mask)); + + ata_dev_warn(dev, "limiting speed to %s\n", buf); + } + + ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, + &dev->udma_mask); + + return 0; +} + +static int ata_dev_set_mode(struct ata_device *dev) +{ + struct ata_port *ap = dev->link->ap; + struct ata_eh_context *ehc = &dev->link->eh_context; + const bool nosetxfer = dev->horkage & ATA_HORKAGE_NOSETXFER; + const char *dev_err_whine = ""; + int ign_dev_err = 0; + unsigned int err_mask = 0; + int rc; + + dev->flags &= ~ATA_DFLAG_PIO; + if (dev->xfer_shift == ATA_SHIFT_PIO) + dev->flags |= ATA_DFLAG_PIO; + + if (nosetxfer && ap->flags & ATA_FLAG_SATA && ata_id_is_sata(dev->id)) + dev_err_whine = " (SET_XFERMODE skipped)"; + else { + if (nosetxfer) + ata_dev_warn(dev, + "NOSETXFER but PATA detected - can't " + "skip SETXFER, might malfunction\n"); + err_mask = ata_dev_set_xfermode(dev); + } + + if (err_mask & ~AC_ERR_DEV) + goto fail; + + /* revalidate */ + ehc->i.flags |= ATA_EHI_POST_SETMODE; + rc = ata_dev_revalidate(dev, ATA_DEV_UNKNOWN, 0); + ehc->i.flags &= ~ATA_EHI_POST_SETMODE; + if (rc) + return rc; + + if (dev->xfer_shift == ATA_SHIFT_PIO) { + /* Old CFA may refuse this command, which is just fine */ + if (ata_id_is_cfa(dev->id)) + ign_dev_err = 1; + /* Catch several broken garbage emulations plus some pre + ATA devices */ + if (ata_id_major_version(dev->id) == 0 && + dev->pio_mode <= XFER_PIO_2) + ign_dev_err = 1; + /* Some very old devices and some bad newer ones fail + any kind of SET_XFERMODE request but support PIO0-2 + timings and no IORDY */ + if (!ata_id_has_iordy(dev->id) && dev->pio_mode <= XFER_PIO_2) + ign_dev_err = 1; + } + /* Early MWDMA devices do DMA but don't allow DMA mode setting. + Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */ + if (dev->xfer_shift == ATA_SHIFT_MWDMA && + dev->dma_mode == XFER_MW_DMA_0 && + (dev->id[63] >> 8) & 1) + ign_dev_err = 1; + + /* if the device is actually configured correctly, ignore dev err */ + if (dev->xfer_mode == ata_xfer_mask2mode(ata_id_xfermask(dev->id))) + ign_dev_err = 1; + + if (err_mask & AC_ERR_DEV) { + if (!ign_dev_err) + goto fail; + else + dev_err_whine = " (device error ignored)"; + } + + DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n", + dev->xfer_shift, (int)dev->xfer_mode); + + ata_dev_info(dev, "configured for %s%s\n", + ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode)), + dev_err_whine); + + return 0; + + fail: + ata_dev_err(dev, "failed to set xfermode (err_mask=0x%x)\n", err_mask); + return -EIO; +} + +/** + * ata_do_set_mode - Program timings and issue SET FEATURES - XFER + * @link: link on which timings will be programmed + * @r_failed_dev: out parameter for failed device + * + * Standard implementation of the function used to tune and set + * ATA device disk transfer mode (PIO3, UDMA6, etc.). If + * ata_dev_set_mode() fails, pointer to the failing device is + * returned in @r_failed_dev. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * 0 on success, negative errno otherwise + */ + +int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) +{ + struct ata_port *ap = link->ap; + struct ata_device *dev; + int rc = 0, used_dma = 0, found = 0; + + /* step 1: calculate xfer_mask */ + ata_for_each_dev(dev, link, ENABLED) { + unsigned long pio_mask, dma_mask; + unsigned int mode_mask; + + mode_mask = ATA_DMA_MASK_ATA; + if (dev->class == ATA_DEV_ATAPI) + mode_mask = ATA_DMA_MASK_ATAPI; + else if (ata_id_is_cfa(dev->id)) + mode_mask = ATA_DMA_MASK_CFA; + + ata_dev_xfermask(dev); + ata_force_xfermask(dev); + + pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0); + + if (libata_dma_mask & mode_mask) + dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, + dev->udma_mask); + else + dma_mask = 0; + + dev->pio_mode = ata_xfer_mask2mode(pio_mask); + dev->dma_mode = ata_xfer_mask2mode(dma_mask); + + found = 1; + if (ata_dma_enabled(dev)) + used_dma = 1; + } + if (!found) + goto out; + + /* step 2: always set host PIO timings */ + ata_for_each_dev(dev, link, ENABLED) { + if (dev->pio_mode == 0xff) { + ata_dev_warn(dev, "no PIO support\n"); + rc = -EINVAL; + goto out; + } + + dev->xfer_mode = dev->pio_mode; + dev->xfer_shift = ATA_SHIFT_PIO; + if (ap->ops->set_piomode) + ap->ops->set_piomode(ap, dev); + } + + /* step 3: set host DMA timings */ + ata_for_each_dev(dev, link, ENABLED) { + if (!ata_dma_enabled(dev)) + continue; + + dev->xfer_mode = dev->dma_mode; + dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode); + if (ap->ops->set_dmamode) + ap->ops->set_dmamode(ap, dev); + } + + /* step 4: update devices' xfer mode */ + ata_for_each_dev(dev, link, ENABLED) { + rc = ata_dev_set_mode(dev); + if (rc) + goto out; + } + + /* Record simplex status. If we selected DMA then the other + * host channels are not permitted to do so. + */ + if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX)) + ap->host->simplex_claimed = ap; + + out: + if (rc) + *r_failed_dev = dev; + return rc; +} + +/** + * ata_wait_ready - wait for link to become ready + * @link: link to be waited on + * @deadline: deadline jiffies for the operation + * @check_ready: callback to check link readiness + * + * Wait for @link to become ready. @check_ready should return + * positive number if @link is ready, 0 if it isn't, -ENODEV if + * link doesn't seem to be occupied, other errno for other error + * conditions. + * + * Transient -ENODEV conditions are allowed for + * ATA_TMOUT_FF_WAIT. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 if @linke is ready before @deadline; otherwise, -errno. + */ +int ata_wait_ready(struct ata_link *link, unsigned long deadline, + int (*check_ready)(struct ata_link *link)) +{ + unsigned long start = jiffies; + unsigned long nodev_deadline; + int warned = 0; + + /* choose which 0xff timeout to use, read comment in libata.h */ + if (link->ap->host->flags & ATA_HOST_PARALLEL_SCAN) + nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT_LONG); + else + nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT); + + /* Slave readiness can't be tested separately from master. On + * M/S emulation configuration, this function should be called + * only on the master and it will handle both master and slave. + */ + WARN_ON(link == link->ap->slave_link); + + if (time_after(nodev_deadline, deadline)) + nodev_deadline = deadline; + + while (1) { + unsigned long now = jiffies; + int ready, tmp; + + ready = tmp = check_ready(link); + if (ready > 0) + return 0; + + /* + * -ENODEV could be transient. Ignore -ENODEV if link + * is online. Also, some SATA devices take a long + * time to clear 0xff after reset. Wait for + * ATA_TMOUT_FF_WAIT[_LONG] on -ENODEV if link isn't + * offline. + * + * Note that some PATA controllers (pata_ali) explode + * if status register is read more than once when + * there's no device attached. + */ + if (ready == -ENODEV) { + if (ata_link_online(link)) + ready = 0; + else if ((link->ap->flags & ATA_FLAG_SATA) && + !ata_link_offline(link) && + time_before(now, nodev_deadline)) + ready = 0; + } + + if (ready) + return ready; + if (time_after(now, deadline)) + return -EBUSY; + + if (!warned && time_after(now, start + 5 * HZ) && + (deadline - now > 3 * HZ)) { + ata_link_warn(link, + "link is slow to respond, please be patient " + "(ready=%d)\n", tmp); + warned = 1; + } + + ata_msleep(link->ap, 50); + } +} + +/** + * ata_wait_after_reset - wait for link to become ready after reset + * @link: link to be waited on + * @deadline: deadline jiffies for the operation + * @check_ready: callback to check link readiness + * + * Wait for @link to become ready after reset. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 if @linke is ready before @deadline; otherwise, -errno. + */ +int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, + int (*check_ready)(struct ata_link *link)) +{ + ata_msleep(link->ap, ATA_WAIT_AFTER_RESET); + + return ata_wait_ready(link, deadline, check_ready); +} + +/** + * sata_link_debounce - debounce SATA phy status + * @link: ATA link to debounce SATA phy status for + * @params: timing parameters { interval, duratinon, timeout } in msec + * @deadline: deadline jiffies for the operation + * + * Make sure SStatus of @link reaches stable state, determined by + * holding the same value where DET is not 1 for @duration polled + * every @interval, before @timeout. Timeout constraints the + * beginning of the stable state. Because DET gets stuck at 1 on + * some controllers after hot unplugging, this functions waits + * until timeout then returns 0 if DET is stable at 1. + * + * @timeout is further limited by @deadline. The sooner of the + * two is used. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_link_debounce(struct ata_link *link, const unsigned long *params, + unsigned long deadline) +{ + unsigned long interval = params[0]; + unsigned long duration = params[1]; + unsigned long last_jiffies, t; + u32 last, cur; + int rc; + + t = ata_deadline(jiffies, params[2]); + if (time_before(t, deadline)) + deadline = t; + + if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) + return rc; + cur &= 0xf; + + last = cur; + last_jiffies = jiffies; + + while (1) { + ata_msleep(link->ap, interval); + if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) + return rc; + cur &= 0xf; + + /* DET stable? */ + if (cur == last) { + if (cur == 1 && time_before(jiffies, deadline)) + continue; + if (time_after(jiffies, + ata_deadline(last_jiffies, duration))) + return 0; + continue; + } + + /* unstable, start over */ + last = cur; + last_jiffies = jiffies; + + /* Check deadline. If debouncing failed, return + * -EPIPE to tell upper layer to lower link speed. + */ + if (time_after(jiffies, deadline)) + return -EPIPE; + } +} + +/** + * sata_link_resume - resume SATA link + * @link: ATA link to resume SATA + * @params: timing parameters { interval, duratinon, timeout } in msec + * @deadline: deadline jiffies for the operation + * + * Resume SATA phy @link and debounce it. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_link_resume(struct ata_link *link, const unsigned long *params, + unsigned long deadline) +{ + int tries = ATA_LINK_RESUME_TRIES; + u32 scontrol, serror; + int rc; + + if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) + return rc; + + /* + * Writes to SControl sometimes get ignored under certain + * controllers (ata_piix SIDPR). Make sure DET actually is + * cleared. + */ + do { + scontrol = (scontrol & 0x0f0) | 0x300; + if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) + return rc; + /* + * Some PHYs react badly if SStatus is pounded + * immediately after resuming. Delay 200ms before + * debouncing. + */ + ata_msleep(link->ap, 200); + + /* is SControl restored correctly? */ + if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) + return rc; + } while ((scontrol & 0xf0f) != 0x300 && --tries); + + if ((scontrol & 0xf0f) != 0x300) { + ata_link_warn(link, "failed to resume link (SControl %X)\n", + scontrol); + return 0; + } + + if (tries < ATA_LINK_RESUME_TRIES) + ata_link_warn(link, "link resume succeeded after %d retries\n", + ATA_LINK_RESUME_TRIES - tries); + + if ((rc = sata_link_debounce(link, params, deadline))) + return rc; + + /* clear SError, some PHYs require this even for SRST to work */ + if (!(rc = sata_scr_read(link, SCR_ERROR, &serror))) + rc = sata_scr_write(link, SCR_ERROR, serror); + + return rc != -EINVAL ? rc : 0; +} + +/** + * sata_link_scr_lpm - manipulate SControl IPM and SPM fields + * @link: ATA link to manipulate SControl for + * @policy: LPM policy to configure + * @spm_wakeup: initiate LPM transition to active state + * + * Manipulate the IPM field of the SControl register of @link + * according to @policy. If @policy is ATA_LPM_MAX_POWER and + * @spm_wakeup is %true, the SPM field is manipulated to wake up + * the link. This function also clears PHYRDY_CHG before + * returning. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on succes, -errno otherwise. + */ +int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, + bool spm_wakeup) +{ + struct ata_eh_context *ehc = &link->eh_context; + bool woken_up = false; + u32 scontrol; + int rc; + + rc = sata_scr_read(link, SCR_CONTROL, &scontrol); + if (rc) + return rc; + + switch (policy) { + case ATA_LPM_FIRMWARE_DEFAULTS: + /* use the values we read at probe */ + scontrol &= ~(0x7 << 8); + scontrol |= (link->init_lpm << 8); + break; + case ATA_LPM_MAX_POWER: + /* disable all LPM transitions */ + scontrol |= (0x7 << 8); + /* initiate transition to active state */ + if (spm_wakeup) { + scontrol |= (0x4 << 12); + woken_up = true; + } + break; + case ATA_LPM_MED_POWER: + /* allow LPM to PARTIAL */ + scontrol &= ~(0x1 << 8); + scontrol |= (0x6 << 8); + break; + case ATA_LPM_MIN_POWER: + if (ata_link_nr_enabled(link) > 0) + /* no restrictions on LPM transitions */ + scontrol &= ~(0x7 << 8); + else { + /* empty port, power off */ + scontrol &= ~0xf; + scontrol |= (0x1 << 2); + } + break; + default: + WARN_ON(1); + } + + rc = sata_scr_write(link, SCR_CONTROL, scontrol); + if (rc) + return rc; + + /* give the link time to transit out of LPM state */ + if (woken_up) + msleep(10); + + /* clear PHYRDY_CHG from SError */ + ehc->i.serror &= ~SERR_PHYRDY_CHG; + return sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG); +} + +/** + * ata_std_prereset - prepare for reset + * @link: ATA link to be reset + * @deadline: deadline jiffies for the operation + * + * @link is about to be reset. Initialize it. Failure from + * prereset makes libata abort whole reset sequence and give up + * that port, so prereset should be best-effort. It does its + * best to prepare for reset sequence but if things go wrong, it + * should just whine, not fail. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_std_prereset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; + const unsigned long *timing = sata_ehc_deb_timing(ehc); + int rc; + + /* if we're about to do hardreset, nothing more to do */ + if (ehc->i.action & ATA_EH_HARDRESET) + return 0; + + /* if SATA, resume link */ + if (ap->flags & ATA_FLAG_SATA) { + rc = sata_link_resume(link, timing, deadline); + /* whine about phy resume failure but proceed */ + if (rc && rc != -EOPNOTSUPP) + ata_link_warn(link, + "failed to resume link for reset (errno=%d)\n", + rc); + } + + /* no point in trying softreset on offline link */ + if (ata_phys_link_offline(link)) + ehc->i.action &= ~ATA_EH_SOFTRESET; + + return 0; +} + +/** + * sata_link_hardreset - reset link via SATA phy reset + * @link: link to reset + * @timing: timing parameters { interval, duratinon, timeout } in msec + * @deadline: deadline jiffies for the operation + * @online: optional out parameter indicating link onlineness + * @check_ready: optional callback to check link readiness + * + * SATA phy-reset @link using DET bits of SControl register. + * After hardreset, link readiness is waited upon using + * ata_wait_ready() if @check_ready is specified. LLDs are + * allowed to not specify @check_ready and wait itself after this + * function returns. Device classification is LLD's + * responsibility. + * + * *@online is set to one iff reset succeeded and @link is online + * after reset. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, + unsigned long deadline, + bool *online, int (*check_ready)(struct ata_link *)) +{ + u32 scontrol; + int rc; + + DPRINTK("ENTER\n"); + + if (online) + *online = false; + + if (sata_set_spd_needed(link)) { + /* SATA spec says nothing about how to reconfigure + * spd. To be on the safe side, turn off phy during + * reconfiguration. This works for at least ICH7 AHCI + * and Sil3124. + */ + if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) + goto out; + + scontrol = (scontrol & 0x0f0) | 0x304; + + if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) + goto out; + + sata_set_spd(link); + } + + /* issue phy wake/reset */ + if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) + goto out; + + scontrol = (scontrol & 0x0f0) | 0x301; + + if ((rc = sata_scr_write_flush(link, SCR_CONTROL, scontrol))) + goto out; + + /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 + * 10.4.2 says at least 1 ms. + */ + ata_msleep(link->ap, 1); + + /* bring link back */ + rc = sata_link_resume(link, timing, deadline); + if (rc) + goto out; + /* if link is offline nothing more to do */ + if (ata_phys_link_offline(link)) + goto out; + + /* Link is online. From this point, -ENODEV too is an error. */ + if (online) + *online = true; + + if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) { + /* If PMP is supported, we have to do follow-up SRST. + * Some PMPs don't send D2H Reg FIS after hardreset if + * the first port is empty. Wait only for + * ATA_TMOUT_PMP_SRST_WAIT. + */ + if (check_ready) { + unsigned long pmp_deadline; + + pmp_deadline = ata_deadline(jiffies, + ATA_TMOUT_PMP_SRST_WAIT); + if (time_after(pmp_deadline, deadline)) + pmp_deadline = deadline; + ata_wait_ready(link, pmp_deadline, check_ready); + } + rc = -EAGAIN; + goto out; + } + + rc = 0; + if (check_ready) + rc = ata_wait_ready(link, deadline, check_ready); + out: + if (rc && rc != -EAGAIN) { + /* online is set iff link is online && reset succeeded */ + if (online) + *online = false; + ata_link_err(link, "COMRESET failed (errno=%d)\n", rc); + } + DPRINTK("EXIT, rc=%d\n", rc); + return rc; +} + +/** + * sata_std_hardreset - COMRESET w/o waiting or classification + * @link: link to reset + * @class: resulting class of attached device + * @deadline: deadline jiffies for the operation + * + * Standard SATA COMRESET w/o waiting or classification. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 if link offline, -EAGAIN if link online, -errno on errors. + */ +int sata_std_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + bool online; + int rc; + + /* do hardreset */ + rc = sata_link_hardreset(link, timing, deadline, &online, NULL); + return online ? -EAGAIN : rc; +} + +/** + * ata_std_postreset - standard postreset callback + * @link: the target ata_link + * @classes: classes of attached devices + * + * This function is invoked after a successful reset. Note that + * the device might have been reset more than once using + * different reset methods before postreset is invoked. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_std_postreset(struct ata_link *link, unsigned int *classes) +{ + u32 serror; + + DPRINTK("ENTER\n"); + + /* reset complete, clear SError */ + if (!sata_scr_read(link, SCR_ERROR, &serror)) + sata_scr_write(link, SCR_ERROR, serror); + + /* print link status */ + sata_print_link_status(link); + + DPRINTK("EXIT\n"); +} + +/** + * ata_dev_same_device - Determine whether new ID matches configured device + * @dev: device to compare against + * @new_class: class of the new device + * @new_id: IDENTIFY page of the new device + * + * Compare @new_class and @new_id against @dev and determine + * whether @dev is the device indicated by @new_class and + * @new_id. + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if @dev matches @new_class and @new_id, 0 otherwise. + */ +static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, + const u16 *new_id) +{ + const u16 *old_id = dev->id; + unsigned char model[2][ATA_ID_PROD_LEN + 1]; + unsigned char serial[2][ATA_ID_SERNO_LEN + 1]; + + if (dev->class != new_class) { + ata_dev_info(dev, "class mismatch %d != %d\n", + dev->class, new_class); + return 0; + } + + ata_id_c_string(old_id, model[0], ATA_ID_PROD, sizeof(model[0])); + ata_id_c_string(new_id, model[1], ATA_ID_PROD, sizeof(model[1])); + ata_id_c_string(old_id, serial[0], ATA_ID_SERNO, sizeof(serial[0])); + ata_id_c_string(new_id, serial[1], ATA_ID_SERNO, sizeof(serial[1])); + + if (strcmp(model[0], model[1])) { + ata_dev_info(dev, "model number mismatch '%s' != '%s'\n", + model[0], model[1]); + return 0; + } + + if (strcmp(serial[0], serial[1])) { + ata_dev_info(dev, "serial number mismatch '%s' != '%s'\n", + serial[0], serial[1]); + return 0; + } + + return 1; +} + +/** + * ata_dev_reread_id - Re-read IDENTIFY data + * @dev: target ATA device + * @readid_flags: read ID flags + * + * Re-read IDENTIFY page and make sure @dev is still attached to + * the port. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, negative errno otherwise + */ +int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags) +{ + unsigned int class = dev->class; + u16 *id = (void *)dev->link->ap->sector_buf; + int rc; + + /* read ID data */ + rc = ata_dev_read_id(dev, &class, readid_flags, id); + if (rc) + return rc; + + /* is the device still there? */ + if (!ata_dev_same_device(dev, class, id)) + return -ENODEV; + + memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS); + return 0; +} + +/** + * ata_dev_revalidate - Revalidate ATA device + * @dev: device to revalidate + * @new_class: new class code + * @readid_flags: read ID flags + * + * Re-read IDENTIFY page, make sure @dev is still attached to the + * port and reconfigure it according to the new IDENTIFY page. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, negative errno otherwise + */ +int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, + unsigned int readid_flags) +{ + u64 n_sectors = dev->n_sectors; + u64 n_native_sectors = dev->n_native_sectors; + int rc; + + if (!ata_dev_enabled(dev)) + return -ENODEV; + + /* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */ + if (ata_class_enabled(new_class) && + new_class != ATA_DEV_ATA && + new_class != ATA_DEV_ATAPI && + new_class != ATA_DEV_ZAC && + new_class != ATA_DEV_SEMB) { + ata_dev_info(dev, "class mismatch %u != %u\n", + dev->class, new_class); + rc = -ENODEV; + goto fail; + } + + /* re-read ID */ + rc = ata_dev_reread_id(dev, readid_flags); + if (rc) + goto fail; + + /* configure device according to the new ID */ + rc = ata_dev_configure(dev); + if (rc) + goto fail; + + /* verify n_sectors hasn't changed */ + if (dev->class != ATA_DEV_ATA || !n_sectors || + dev->n_sectors == n_sectors) + return 0; + + /* n_sectors has changed */ + ata_dev_warn(dev, "n_sectors mismatch %llu != %llu\n", + (unsigned long long)n_sectors, + (unsigned long long)dev->n_sectors); + + /* + * Something could have caused HPA to be unlocked + * involuntarily. If n_native_sectors hasn't changed and the + * new size matches it, keep the device. + */ + if (dev->n_native_sectors == n_native_sectors && + dev->n_sectors > n_sectors && dev->n_sectors == n_native_sectors) { + ata_dev_warn(dev, + "new n_sectors matches native, probably " + "late HPA unlock, n_sectors updated\n"); + /* use the larger n_sectors */ + return 0; + } + + /* + * Some BIOSes boot w/o HPA but resume w/ HPA locked. Try + * unlocking HPA in those cases. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=15396 + */ + if (dev->n_native_sectors == n_native_sectors && + dev->n_sectors < n_sectors && n_sectors == n_native_sectors && + !(dev->horkage & ATA_HORKAGE_BROKEN_HPA)) { + ata_dev_warn(dev, + "old n_sectors matches native, probably " + "late HPA lock, will try to unlock HPA\n"); + /* try unlocking HPA */ + dev->flags |= ATA_DFLAG_UNLOCK_HPA; + rc = -EIO; + } else + rc = -ENODEV; + + /* restore original n_[native_]sectors and fail */ + dev->n_native_sectors = n_native_sectors; + dev->n_sectors = n_sectors; + fail: + ata_dev_err(dev, "revalidation failed (errno=%d)\n", rc); + return rc; +} + +struct ata_blacklist_entry { + const char *model_num; + const char *model_rev; + unsigned long horkage; +}; + +static const struct ata_blacklist_entry ata_device_blacklist [] = { + /* Devices with DMA related problems under Linux */ + { "WDC AC11000H", NULL, ATA_HORKAGE_NODMA }, + { "WDC AC22100H", NULL, ATA_HORKAGE_NODMA }, + { "WDC AC32500H", NULL, ATA_HORKAGE_NODMA }, + { "WDC AC33100H", NULL, ATA_HORKAGE_NODMA }, + { "WDC AC31600H", NULL, ATA_HORKAGE_NODMA }, + { "WDC AC32100H", "24.09P07", ATA_HORKAGE_NODMA }, + { "WDC AC23200L", "21.10N21", ATA_HORKAGE_NODMA }, + { "Compaq CRD-8241B", NULL, ATA_HORKAGE_NODMA }, + { "CRD-8400B", NULL, ATA_HORKAGE_NODMA }, + { "CRD-848[02]B", NULL, ATA_HORKAGE_NODMA }, + { "CRD-84", NULL, ATA_HORKAGE_NODMA }, + { "SanDisk SDP3B", NULL, ATA_HORKAGE_NODMA }, + { "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA }, + { "SANYO CD-ROM CRD", NULL, ATA_HORKAGE_NODMA }, + { "HITACHI CDR-8", NULL, ATA_HORKAGE_NODMA }, + { "HITACHI CDR-8[34]35",NULL, ATA_HORKAGE_NODMA }, + { "Toshiba CD-ROM XM-6202B", NULL, ATA_HORKAGE_NODMA }, + { "TOSHIBA CD-ROM XM-1702BC", NULL, ATA_HORKAGE_NODMA }, + { "CD-532E-A", NULL, ATA_HORKAGE_NODMA }, + { "E-IDE CD-ROM CR-840",NULL, ATA_HORKAGE_NODMA }, + { "CD-ROM Drive/F5A", NULL, ATA_HORKAGE_NODMA }, + { "WPI CDD-820", NULL, ATA_HORKAGE_NODMA }, + { "SAMSUNG CD-ROM SC-148C", NULL, ATA_HORKAGE_NODMA }, + { "SAMSUNG CD-ROM SC", NULL, ATA_HORKAGE_NODMA }, + { "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA }, + { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA }, + { "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA }, + { "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA }, + { " 2GB ATA Flash Disk", "ADMA428M", ATA_HORKAGE_NODMA }, + /* Odd clown on sil3726/4726 PMPs */ + { "Config Disk", NULL, ATA_HORKAGE_DISABLE }, + + /* Weird ATAPI devices */ + { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 }, + { "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA }, + { "Slimtype DVD A DS8A8SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 }, + { "Slimtype DVD A DS8A9SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 }, + + /* + * Causes silent data corruption with higher max sects. + * http://lkml.kernel.org/g/x49wpy40ysk.fsf@segfault.boston.devel.redhat.com + */ + { "ST380013AS", "3.20", ATA_HORKAGE_MAX_SEC_1024 }, + + /* Devices we expect to fail diagnostics */ + + /* Devices where NCQ should be avoided */ + /* NCQ is slow */ + { "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ }, + { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, }, + /* http://thread.gmane.org/gmane.linux.ide/14907 */ + { "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ }, + /* NCQ is broken */ + { "Maxtor *", "BANC*", ATA_HORKAGE_NONCQ }, + { "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ }, + { "ST380817AS", "3.42", ATA_HORKAGE_NONCQ }, + { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ }, + { "OCZ CORE_SSD", "02.10104", ATA_HORKAGE_NONCQ }, + + /* Seagate NCQ + FLUSH CACHE firmware bug */ + { "ST31500341AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST31000333AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3640[36]23AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3320[68]13AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + /* drives which fail FPDMA_AA activation (some may freeze afterwards) */ + { "ST1000LM024 HN-M101MBB", "2AR10001", ATA_HORKAGE_BROKEN_FPDMA_AA }, + { "ST1000LM024 HN-M101MBB", "2BA30001", ATA_HORKAGE_BROKEN_FPDMA_AA }, + { "VB0250EAVER", "HPG7", ATA_HORKAGE_BROKEN_FPDMA_AA }, + + /* Blacklist entries taken from Silicon Image 3124/3132 + Windows driver .inf file - also several Linux problem reports */ + { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, + { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, }, + { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, }, + + /* https://bugzilla.kernel.org/show_bug.cgi?id=15573 */ + { "C300-CTFDDAC128MAG", "0001", ATA_HORKAGE_NONCQ, }, + + /* devices which puke on READ_NATIVE_MAX */ + { "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, }, + { "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA }, + { "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA }, + { "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA }, + + /* this one allows HPA unlocking but fails IOs on the area */ + { "OCZ-VERTEX", "1.30", ATA_HORKAGE_BROKEN_HPA }, + + /* Devices which report 1 sector over size HPA */ + { "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE, }, + { "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE, }, + { "ST310211A", NULL, ATA_HORKAGE_HPA_SIZE, }, + + /* Devices which get the IVB wrong */ + { "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, }, + /* Maybe we should just blacklist TSSTcorp... */ + { "TSSTcorp CDDVDW SH-S202[HJN]", "SB0[01]", ATA_HORKAGE_IVB, }, + + /* Devices that do not need bridging limits applied */ + { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, + { "BUFFALO HD-QSU2/R5", NULL, ATA_HORKAGE_BRIDGE_OK, }, + + /* Devices which aren't very happy with higher link speeds */ + { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, }, + { "Seagate FreeAgent GoFlex", NULL, ATA_HORKAGE_1_5_GBPS, }, + + /* + * Devices which choke on SETXFER. Applies only if both the + * device and controller are SATA. + */ + { "PIONEER DVD-RW DVRTD08", NULL, ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVRTD08A", NULL, ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVR-215", NULL, ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER }, + + /* devices that don't properly handle queued TRIM commands */ + { "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | + ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "Crucial_CT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | + ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "Micron_M5[15]0_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | + ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "Crucial_CT*M550*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | + ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "Crucial_CT*MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | + ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "Samsung SSD 8*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | + ATA_HORKAGE_ZERO_AFTER_TRIM, }, + + /* devices that don't properly handle TRIM commands */ + { "SuperSSpeed S238*", NULL, ATA_HORKAGE_NOTRIM, }, + + /* + * As defined, the DRAT (Deterministic Read After Trim) and RZAT + * (Return Zero After Trim) flags in the ATA Command Set are + * unreliable in the sense that they only define what happens if + * the device successfully executed the DSM TRIM command. TRIM + * is only advisory, however, and the device is free to silently + * ignore all or parts of the request. + * + * Whitelist drives that are known to reliably return zeroes + * after TRIM. + */ + + /* + * The intel 510 drive has buggy DRAT/RZAT. Explicitly exclude + * that model before whitelisting all other intel SSDs. + */ + { "INTEL*SSDSC2MH*", NULL, 0, }, + + { "Micron*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "Crucial*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "INTEL*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "SSD*INTEL*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "Samsung*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "SAMSUNG*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "ST[1248][0248]0[FH]*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, + + /* + * Some WD SATA-I drives spin up and down erratically when the link + * is put into the slumber mode. We don't have full list of the + * affected devices. Disable LPM if the device matches one of the + * known prefixes and is SATA-1. As a side effect LPM partial is + * lost too. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=57211 + */ + { "WDC WD800JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD1200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD1600JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD2000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD2500JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD3000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD3200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + + /* End Marker */ + { } +}; + +static unsigned long ata_dev_blacklisted(const struct ata_device *dev) +{ + unsigned char model_num[ATA_ID_PROD_LEN + 1]; + unsigned char model_rev[ATA_ID_FW_REV_LEN + 1]; + const struct ata_blacklist_entry *ad = ata_device_blacklist; + + ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num)); + ata_id_c_string(dev->id, model_rev, ATA_ID_FW_REV, sizeof(model_rev)); + + while (ad->model_num) { + if (glob_match(ad->model_num, model_num)) { + if (ad->model_rev == NULL) + return ad->horkage; + if (glob_match(ad->model_rev, model_rev)) + return ad->horkage; + } + ad++; + } + return 0; +} + +static int ata_dma_blacklisted(const struct ata_device *dev) +{ + /* We don't support polling DMA. + * DMA blacklist those ATAPI devices with CDB-intr (and use PIO) + * if the LLDD handles only interrupts in the HSM_ST_LAST state. + */ + if ((dev->link->ap->flags & ATA_FLAG_PIO_POLLING) && + (dev->flags & ATA_DFLAG_CDB_INTR)) + return 1; + return (dev->horkage & ATA_HORKAGE_NODMA) ? 1 : 0; +} + +/** + * ata_is_40wire - check drive side detection + * @dev: device + * + * Perform drive side detection decoding, allowing for device vendors + * who can't follow the documentation. + */ + +static int ata_is_40wire(struct ata_device *dev) +{ + if (dev->horkage & ATA_HORKAGE_IVB) + return ata_drive_40wire_relaxed(dev->id); + return ata_drive_40wire(dev->id); +} + +/** + * cable_is_40wire - 40/80/SATA decider + * @ap: port to consider + * + * This function encapsulates the policy for speed management + * in one place. At the moment we don't cache the result but + * there is a good case for setting ap->cbl to the result when + * we are called with unknown cables (and figuring out if it + * impacts hotplug at all). + * + * Return 1 if the cable appears to be 40 wire. + */ + +static int cable_is_40wire(struct ata_port *ap) +{ + struct ata_link *link; + struct ata_device *dev; + + /* If the controller thinks we are 40 wire, we are. */ + if (ap->cbl == ATA_CBL_PATA40) + return 1; + + /* If the controller thinks we are 80 wire, we are. */ + if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA) + return 0; + + /* If the system is known to be 40 wire short cable (eg + * laptop), then we allow 80 wire modes even if the drive + * isn't sure. + */ + if (ap->cbl == ATA_CBL_PATA40_SHORT) + return 0; + + /* If the controller doesn't know, we scan. + * + * Note: We look for all 40 wire detects at this point. Any + * 80 wire detect is taken to be 80 wire cable because + * - in many setups only the one drive (slave if present) will + * give a valid detect + * - if you have a non detect capable drive you don't want it + * to colour the choice + */ + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, link, ENABLED) { + if (!ata_is_40wire(dev)) + return 0; + } + } + return 1; +} + +/** + * ata_dev_xfermask - Compute supported xfermask of the given device + * @dev: Device to compute xfermask for + * + * Compute supported xfermask of @dev and store it in + * dev->*_mask. This function is responsible for applying all + * known limits including host controller limits, device + * blacklist, etc... + * + * LOCKING: + * None. + */ +static void ata_dev_xfermask(struct ata_device *dev) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + struct ata_host *host = ap->host; + unsigned long xfer_mask; + + /* controller modes available */ + xfer_mask = ata_pack_xfermask(ap->pio_mask, + ap->mwdma_mask, ap->udma_mask); + + /* drive modes available */ + xfer_mask &= ata_pack_xfermask(dev->pio_mask, + dev->mwdma_mask, dev->udma_mask); + xfer_mask &= ata_id_xfermask(dev->id); + + /* + * CFA Advanced TrueIDE timings are not allowed on a shared + * cable + */ + if (ata_dev_pair(dev)) { + /* No PIO5 or PIO6 */ + xfer_mask &= ~(0x03 << (ATA_SHIFT_PIO + 5)); + /* No MWDMA3 or MWDMA 4 */ + xfer_mask &= ~(0x03 << (ATA_SHIFT_MWDMA + 3)); + } + + if (ata_dma_blacklisted(dev)) { + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + ata_dev_warn(dev, + "device is on DMA blacklist, disabling DMA\n"); + } + + if ((host->flags & ATA_HOST_SIMPLEX) && + host->simplex_claimed && host->simplex_claimed != ap) { + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + ata_dev_warn(dev, + "simplex DMA is claimed by other device, disabling DMA\n"); + } + + if (ap->flags & ATA_FLAG_NO_IORDY) + xfer_mask &= ata_pio_mask_no_iordy(dev); + + if (ap->ops->mode_filter) + xfer_mask = ap->ops->mode_filter(dev, xfer_mask); + + /* Apply cable rule here. Don't apply it early because when + * we handle hot plug the cable type can itself change. + * Check this last so that we know if the transfer rate was + * solely limited by the cable. + * Unknown or 80 wire cables reported host side are checked + * drive side as well. Cases where we know a 40wire cable + * is used safely for 80 are not checked here. + */ + if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA)) + /* UDMA/44 or higher would be available */ + if (cable_is_40wire(ap)) { + ata_dev_warn(dev, + "limited to UDMA/33 due to 40-wire cable\n"); + xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); + } + + ata_unpack_xfermask(xfer_mask, &dev->pio_mask, + &dev->mwdma_mask, &dev->udma_mask); +} + +/** + * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command + * @dev: Device to which command will be sent + * + * Issue SET FEATURES - XFER MODE command to device @dev + * on port @ap. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * 0 on success, AC_ERR_* mask otherwise. + */ + +static unsigned int ata_dev_set_xfermode(struct ata_device *dev) +{ + struct ata_taskfile tf; + unsigned int err_mask; + + /* set up set-features taskfile */ + DPRINTK("set features - xfer mode\n"); + + /* Some controllers and ATAPI devices show flaky interrupt + * behavior after setting xfer mode. Use polling instead. + */ + ata_tf_init(dev, &tf); + tf.command = ATA_CMD_SET_FEATURES; + tf.feature = SETFEATURES_XFER; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_POLLING; + tf.protocol = ATA_PROT_NODATA; + /* If we are using IORDY we must send the mode setting command */ + if (ata_pio_need_iordy(dev)) + tf.nsect = dev->xfer_mode; + /* If the device has IORDY and the controller does not - turn it off */ + else if (ata_id_has_iordy(dev->id)) + tf.nsect = 0x01; + else /* In the ancient relic department - skip all of this */ + return 0; + + /* On some disks, this command causes spin-up, so we need longer timeout */ + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 15000); + + DPRINTK("EXIT, err_mask=%x\n", err_mask); + return err_mask; +} + +/** + * ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES + * @dev: Device to which command will be sent + * @enable: Whether to enable or disable the feature + * @feature: The sector count represents the feature to set + * + * Issue SET FEATURES - SATA FEATURES command to device @dev + * on port @ap with sector count + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * 0 on success, AC_ERR_* mask otherwise. + */ +unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature) +{ + struct ata_taskfile tf; + unsigned int err_mask; + + /* set up set-features taskfile */ + DPRINTK("set features - SATA features\n"); + + ata_tf_init(dev, &tf); + tf.command = ATA_CMD_SET_FEATURES; + tf.feature = enable; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_NODATA; + tf.nsect = feature; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + + DPRINTK("EXIT, err_mask=%x\n", err_mask); + return err_mask; +} +EXPORT_SYMBOL_GPL(ata_dev_set_feature); + +/** + * ata_dev_init_params - Issue INIT DEV PARAMS command + * @dev: Device to which command will be sent + * @heads: Number of heads (taskfile parameter) + * @sectors: Number of sectors (taskfile parameter) + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, AC_ERR_* mask otherwise. + */ +static unsigned int ata_dev_init_params(struct ata_device *dev, + u16 heads, u16 sectors) +{ + struct ata_taskfile tf; + unsigned int err_mask; + + /* Number of sectors per track 1-255. Number of heads 1-16 */ + if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) + return AC_ERR_INVALID; + + /* set up init dev params taskfile */ + DPRINTK("init dev params \n"); + + ata_tf_init(dev, &tf); + tf.command = ATA_CMD_INIT_DEV_PARAMS; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_NODATA; + tf.nsect = sectors; + tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + /* A clean abort indicates an original or just out of spec drive + and we should continue as we issue the setup based on the + drive reported working geometry */ + if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED)) + err_mask = 0; + + DPRINTK("EXIT, err_mask=%x\n", err_mask); + return err_mask; +} + +/** + * ata_sg_clean - Unmap DMA memory associated with command + * @qc: Command containing DMA memory to be released + * + * Unmap all mapped DMA memory associated with this command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_sg_clean(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scatterlist *sg = qc->sg; + int dir = qc->dma_dir; + + WARN_ON_ONCE(sg == NULL); + + VPRINTK("unmapping %u sg elements\n", qc->n_elem); + + if (qc->n_elem) + dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir); + + qc->flags &= ~ATA_QCFLAG_DMAMAP; + qc->sg = NULL; +} + +/** + * atapi_check_dma - Check whether ATAPI DMA can be supported + * @qc: Metadata associated with taskfile to check + * + * Allow low-level driver to filter ATA PACKET commands, returning + * a status indicating whether or not it is OK to use DMA for the + * supplied PACKET command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: 0 when ATAPI DMA can be used + * nonzero otherwise + */ +int atapi_check_dma(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* Don't allow DMA if it isn't multiple of 16 bytes. Quite a + * few ATAPI devices choke on such DMA requests. + */ + if (!(qc->dev->horkage & ATA_HORKAGE_ATAPI_MOD16_DMA) && + unlikely(qc->nbytes & 15)) + return 1; + + if (ap->ops->check_atapi_dma) + return ap->ops->check_atapi_dma(qc); + + return 0; +} + +/** + * ata_std_qc_defer - Check whether a qc needs to be deferred + * @qc: ATA command in question + * + * Non-NCQ commands cannot run with any other command, NCQ or + * not. As upper layer only knows the queue depth, we are + * responsible for maintaining exclusion. This function checks + * whether a new command @qc can be issued. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * ATA_DEFER_* if deferring is needed, 0 otherwise. + */ +int ata_std_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_link *link = qc->dev->link; + + if (qc->tf.protocol == ATA_PROT_NCQ) { + if (!ata_tag_valid(link->active_tag)) + return 0; + } else { + if (!ata_tag_valid(link->active_tag) && !link->sactive) + return 0; + } + + return ATA_DEFER_LINK; +} + +void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } + +/** + * ata_sg_init - Associate command with scatter-gather table. + * @qc: Command to be associated + * @sg: Scatter-gather table. + * @n_elem: Number of elements in s/g table. + * + * Initialize the data-related elements of queued_cmd @qc + * to point to a scatter-gather table @sg, containing @n_elem + * elements. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, + unsigned int n_elem) +{ + qc->sg = sg; + qc->n_elem = n_elem; + qc->cursg = qc->sg; +} + +/** + * ata_sg_setup - DMA-map the scatter-gather table associated with a command. + * @qc: Command with scatter-gather table to be mapped. + * + * DMA-map the scatter-gather table associated with queued_cmd @qc. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Zero on success, negative on error. + * + */ +static int ata_sg_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int n_elem; + + VPRINTK("ENTER, ata%u\n", ap->print_id); + + n_elem = dma_map_sg(ap->dev, qc->sg, qc->n_elem, qc->dma_dir); + if (n_elem < 1) + return -1; + + DPRINTK("%d sg elements mapped\n", n_elem); + qc->orig_n_elem = qc->n_elem; + qc->n_elem = n_elem; + qc->flags |= ATA_QCFLAG_DMAMAP; + + return 0; +} + +/** + * swap_buf_le16 - swap halves of 16-bit words in place + * @buf: Buffer to swap + * @buf_words: Number of 16-bit words in buffer. + * + * Swap halves of 16-bit words if needed to convert from + * little-endian byte order to native cpu byte order, or + * vice-versa. + * + * LOCKING: + * Inherited from caller. + */ +void swap_buf_le16(u16 *buf, unsigned int buf_words) +{ +#ifdef __BIG_ENDIAN + unsigned int i; + + for (i = 0; i < buf_words; i++) + buf[i] = le16_to_cpu(buf[i]); +#endif /* __BIG_ENDIAN */ +} + +/** + * ata_qc_new_init - Request an available ATA command, and initialize it + * @dev: Device from whom we request an available command structure + * + * LOCKING: + * None. + */ + +struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag) +{ + struct ata_port *ap = dev->link->ap; + struct ata_queued_cmd *qc; + + /* no command while frozen */ + if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) + return NULL; + + /* libsas case */ + if (ap->flags & ATA_FLAG_SAS_HOST) { + tag = ata_sas_allocate_tag(ap); + if (tag < 0) + return NULL; + } + + qc = __ata_qc_from_tag(ap, tag); + qc->tag = tag; + qc->scsicmd = NULL; + qc->ap = ap; + qc->dev = dev; + + ata_qc_reinit(qc); + + return qc; +} + +/** + * ata_qc_free - free unused ata_queued_cmd + * @qc: Command to complete + * + * Designed to free unused ata_queued_cmd object + * in case something prevents using it. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_qc_free(struct ata_queued_cmd *qc) +{ + struct ata_port *ap; + unsigned int tag; + + WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ + ap = qc->ap; + + qc->flags = 0; + tag = qc->tag; + if (likely(ata_tag_valid(tag))) { + qc->tag = ATA_TAG_POISON; + if (ap->flags & ATA_FLAG_SAS_HOST) + ata_sas_free_tag(tag, ap); + } +} + +void __ata_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap; + struct ata_link *link; + + WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ + WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE)); + ap = qc->ap; + link = qc->dev->link; + + if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) + ata_sg_clean(qc); + + /* command should be marked inactive atomically with qc completion */ + if (qc->tf.protocol == ATA_PROT_NCQ) { + link->sactive &= ~(1 << qc->tag); + if (!link->sactive) + ap->nr_active_links--; + } else { + link->active_tag = ATA_TAG_POISON; + ap->nr_active_links--; + } + + /* clear exclusive status */ + if (unlikely(qc->flags & ATA_QCFLAG_CLEAR_EXCL && + ap->excl_link == link)) + ap->excl_link = NULL; + + /* atapi: mark qc as inactive to prevent the interrupt handler + * from completing the command twice later, before the error handler + * is called. (when rc != 0 and atapi request sense is needed) + */ + qc->flags &= ~ATA_QCFLAG_ACTIVE; + ap->qc_active &= ~(1 << qc->tag); + + /* call completion callback */ + qc->complete_fn(qc); +} + +static void fill_result_tf(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + qc->result_tf.flags = qc->tf.flags; + ap->ops->qc_fill_rtf(qc); +} + +static void ata_verify_xfer(struct ata_queued_cmd *qc) +{ + struct ata_device *dev = qc->dev; + + if (ata_is_nodata(qc->tf.protocol)) + return; + + if ((dev->mwdma_mask || dev->udma_mask) && ata_is_pio(qc->tf.protocol)) + return; + + dev->flags &= ~ATA_DFLAG_DUBIOUS_XFER; +} + +/** + * ata_qc_complete - Complete an active ATA command + * @qc: Command to complete + * + * Indicate to the mid and upper layers that an ATA command has + * completed, with either an ok or not-ok status. + * + * Refrain from calling this function multiple times when + * successfully completing multiple NCQ commands. + * ata_qc_complete_multiple() should be used instead, which will + * properly update IRQ expect state. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* XXX: New EH and old EH use different mechanisms to + * synchronize EH with regular execution path. + * + * In new EH, a failed qc is marked with ATA_QCFLAG_FAILED. + * Normal execution path is responsible for not accessing a + * failed qc. libata core enforces the rule by returning NULL + * from ata_qc_from_tag() for failed qcs. + * + * Old EH depends on ata_qc_complete() nullifying completion + * requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does + * not synchronize with interrupt handler. Only PIO task is + * taken care of. + */ + if (ap->ops->error_handler) { + struct ata_device *dev = qc->dev; + struct ata_eh_info *ehi = &dev->link->eh_info; + + if (unlikely(qc->err_mask)) + qc->flags |= ATA_QCFLAG_FAILED; + + /* + * Finish internal commands without any further processing + * and always with the result TF filled. + */ + if (unlikely(ata_tag_internal(qc->tag))) { + fill_result_tf(qc); + trace_ata_qc_complete_internal(qc); + __ata_qc_complete(qc); + return; + } + + /* + * Non-internal qc has failed. Fill the result TF and + * summon EH. + */ + if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) { + fill_result_tf(qc); + trace_ata_qc_complete_failed(qc); + ata_qc_schedule_eh(qc); + return; + } + + WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN); + + /* read result TF if requested */ + if (qc->flags & ATA_QCFLAG_RESULT_TF) + fill_result_tf(qc); + + trace_ata_qc_complete_done(qc); + /* Some commands need post-processing after successful + * completion. + */ + switch (qc->tf.command) { + case ATA_CMD_SET_FEATURES: + if (qc->tf.feature != SETFEATURES_WC_ON && + qc->tf.feature != SETFEATURES_WC_OFF) + break; + /* fall through */ + case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */ + case ATA_CMD_SET_MULTI: /* multi_count changed */ + /* revalidate device */ + ehi->dev_action[dev->devno] |= ATA_EH_REVALIDATE; + ata_port_schedule_eh(ap); + break; + + case ATA_CMD_SLEEP: + dev->flags |= ATA_DFLAG_SLEEPING; + break; + } + + if (unlikely(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) + ata_verify_xfer(qc); + + __ata_qc_complete(qc); + } else { + if (qc->flags & ATA_QCFLAG_EH_SCHEDULED) + return; + + /* read result TF if failed or requested */ + if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF) + fill_result_tf(qc); + + __ata_qc_complete(qc); + } +} + +/** + * ata_qc_complete_multiple - Complete multiple qcs successfully + * @ap: port in question + * @qc_active: new qc_active mask + * + * Complete in-flight commands. This functions is meant to be + * called from low-level driver's interrupt routine to complete + * requests normally. ap->qc_active and @qc_active is compared + * and commands are completed accordingly. + * + * Always use this function when completing multiple NCQ commands + * from IRQ handlers instead of calling ata_qc_complete() + * multiple times to keep IRQ expect status properly in sync. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Number of completed commands on success, -errno otherwise. + */ +int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active) +{ + int nr_done = 0; + u32 done_mask; + + done_mask = ap->qc_active ^ qc_active; + + if (unlikely(done_mask & qc_active)) { + ata_port_err(ap, "illegal qc_active transition (%08x->%08x)\n", + ap->qc_active, qc_active); + return -EINVAL; + } + + while (done_mask) { + struct ata_queued_cmd *qc; + unsigned int tag = __ffs(done_mask); + + qc = ata_qc_from_tag(ap, tag); + if (qc) { + ata_qc_complete(qc); + nr_done++; + } + done_mask &= ~(1 << tag); + } + + return nr_done; +} + +/** + * ata_qc_issue - issue taskfile to device + * @qc: command to issue to device + * + * Prepare an ATA command to submission to device. + * This includes mapping the data into a DMA-able + * area, filling in the S/G table, and finally + * writing the taskfile to hardware, starting the command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_link *link = qc->dev->link; + u8 prot = qc->tf.protocol; + + /* Make sure only one non-NCQ command is outstanding. The + * check is skipped for old EH because it reuses active qc to + * request ATAPI sense. + */ + WARN_ON_ONCE(ap->ops->error_handler && ata_tag_valid(link->active_tag)); + + if (ata_is_ncq(prot)) { + WARN_ON_ONCE(link->sactive & (1 << qc->tag)); + + if (!link->sactive) + ap->nr_active_links++; + link->sactive |= 1 << qc->tag; + } else { + WARN_ON_ONCE(link->sactive); + + ap->nr_active_links++; + link->active_tag = qc->tag; + } + + qc->flags |= ATA_QCFLAG_ACTIVE; + ap->qc_active |= 1 << qc->tag; + + /* + * We guarantee to LLDs that they will have at least one + * non-zero sg if the command is a data command. + */ + if (WARN_ON_ONCE(ata_is_data(prot) && + (!qc->sg || !qc->n_elem || !qc->nbytes))) + goto sys_err; + + if (ata_is_dma(prot) || (ata_is_pio(prot) && + (ap->flags & ATA_FLAG_PIO_DMA))) + if (ata_sg_setup(qc)) + goto sys_err; + + /* if device is sleeping, schedule reset and abort the link */ + if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) { + link->eh_info.action |= ATA_EH_RESET; + ata_ehi_push_desc(&link->eh_info, "waking up from sleep"); + ata_link_abort(link); + return; + } + + ap->ops->qc_prep(qc); + trace_ata_qc_issue(qc); + qc->err_mask |= ap->ops->qc_issue(qc); + if (unlikely(qc->err_mask)) + goto err; + return; + +sys_err: + qc->err_mask |= AC_ERR_SYSTEM; +err: + ata_qc_complete(qc); +} + +/** + * sata_scr_valid - test whether SCRs are accessible + * @link: ATA link to test SCR accessibility for + * + * Test whether SCRs are accessible for @link. + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if SCRs are accessible, 0 otherwise. + */ +int sata_scr_valid(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + + return (ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read; +} + +/** + * sata_scr_read - read SCR register of the specified port + * @link: ATA link to read SCR for + * @reg: SCR to read + * @val: Place to store read value + * + * Read SCR register @reg of @link into *@val. This function is + * guaranteed to succeed if @link is ap->link, the cable type of + * the port is SATA and the port implements ->scr_read. + * + * LOCKING: + * None if @link is ap->link. Kernel thread context otherwise. + * + * RETURNS: + * 0 on success, negative errno on failure. + */ +int sata_scr_read(struct ata_link *link, int reg, u32 *val) +{ + if (ata_is_host_link(link)) { + if (sata_scr_valid(link)) + return link->ap->ops->scr_read(link, reg, val); + return -EOPNOTSUPP; + } + + return sata_pmp_scr_read(link, reg, val); +} + +/** + * sata_scr_write - write SCR register of the specified port + * @link: ATA link to write SCR for + * @reg: SCR to write + * @val: value to write + * + * Write @val to SCR register @reg of @link. This function is + * guaranteed to succeed if @link is ap->link, the cable type of + * the port is SATA and the port implements ->scr_read. + * + * LOCKING: + * None if @link is ap->link. Kernel thread context otherwise. + * + * RETURNS: + * 0 on success, negative errno on failure. + */ +int sata_scr_write(struct ata_link *link, int reg, u32 val) +{ + if (ata_is_host_link(link)) { + if (sata_scr_valid(link)) + return link->ap->ops->scr_write(link, reg, val); + return -EOPNOTSUPP; + } + + return sata_pmp_scr_write(link, reg, val); +} + +/** + * sata_scr_write_flush - write SCR register of the specified port and flush + * @link: ATA link to write SCR for + * @reg: SCR to write + * @val: value to write + * + * This function is identical to sata_scr_write() except that this + * function performs flush after writing to the register. + * + * LOCKING: + * None if @link is ap->link. Kernel thread context otherwise. + * + * RETURNS: + * 0 on success, negative errno on failure. + */ +int sata_scr_write_flush(struct ata_link *link, int reg, u32 val) +{ + if (ata_is_host_link(link)) { + int rc; + + if (sata_scr_valid(link)) { + rc = link->ap->ops->scr_write(link, reg, val); + if (rc == 0) + rc = link->ap->ops->scr_read(link, reg, &val); + return rc; + } + return -EOPNOTSUPP; + } + + return sata_pmp_scr_write(link, reg, val); +} + +/** + * ata_phys_link_online - test whether the given link is online + * @link: ATA link to test + * + * Test whether @link is online. Note that this function returns + * 0 if online status of @link cannot be obtained, so + * ata_link_online(link) != !ata_link_offline(link). + * + * LOCKING: + * None. + * + * RETURNS: + * True if the port online status is available and online. + */ +bool ata_phys_link_online(struct ata_link *link) +{ + u32 sstatus; + + if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && + ata_sstatus_online(sstatus)) + return true; + return false; +} + +/** + * ata_phys_link_offline - test whether the given link is offline + * @link: ATA link to test + * + * Test whether @link is offline. Note that this function + * returns 0 if offline status of @link cannot be obtained, so + * ata_link_online(link) != !ata_link_offline(link). + * + * LOCKING: + * None. + * + * RETURNS: + * True if the port offline status is available and offline. + */ +bool ata_phys_link_offline(struct ata_link *link) +{ + u32 sstatus; + + if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && + !ata_sstatus_online(sstatus)) + return true; + return false; +} + +/** + * ata_link_online - test whether the given link is online + * @link: ATA link to test + * + * Test whether @link is online. This is identical to + * ata_phys_link_online() when there's no slave link. When + * there's a slave link, this function should only be called on + * the master link and will return true if any of M/S links is + * online. + * + * LOCKING: + * None. + * + * RETURNS: + * True if the port online status is available and online. + */ +bool ata_link_online(struct ata_link *link) +{ + struct ata_link *slave = link->ap->slave_link; + + WARN_ON(link == slave); /* shouldn't be called on slave link */ + + return ata_phys_link_online(link) || + (slave && ata_phys_link_online(slave)); +} + +/** + * ata_link_offline - test whether the given link is offline + * @link: ATA link to test + * + * Test whether @link is offline. This is identical to + * ata_phys_link_offline() when there's no slave link. When + * there's a slave link, this function should only be called on + * the master link and will return true if both M/S links are + * offline. + * + * LOCKING: + * None. + * + * RETURNS: + * True if the port offline status is available and offline. + */ +bool ata_link_offline(struct ata_link *link) +{ + struct ata_link *slave = link->ap->slave_link; + + WARN_ON(link == slave); /* shouldn't be called on slave link */ + + return ata_phys_link_offline(link) && + (!slave || ata_phys_link_offline(slave)); +} + +#ifdef CONFIG_PM +static void ata_port_request_pm(struct ata_port *ap, pm_message_t mesg, + unsigned int action, unsigned int ehi_flags, + bool async) +{ + struct ata_link *link; + unsigned long flags; + + /* Previous resume operation might still be in + * progress. Wait for PM_PENDING to clear. + */ + if (ap->pflags & ATA_PFLAG_PM_PENDING) { + ata_port_wait_eh(ap); + WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); + } + + /* request PM ops to EH */ + spin_lock_irqsave(ap->lock, flags); + + ap->pm_mesg = mesg; + ap->pflags |= ATA_PFLAG_PM_PENDING; + ata_for_each_link(link, ap, HOST_FIRST) { + link->eh_info.action |= action; + link->eh_info.flags |= ehi_flags; + } + + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + if (!async) { + ata_port_wait_eh(ap); + WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); + } +} + +/* + * On some hardware, device fails to respond after spun down for suspend. As + * the device won't be used before being resumed, we don't need to touch the + * device. Ask EH to skip the usual stuff and proceed directly to suspend. + * + * http://thread.gmane.org/gmane.linux.ide/46764 + */ +static const unsigned int ata_port_suspend_ehi = ATA_EHI_QUIET + | ATA_EHI_NO_AUTOPSY + | ATA_EHI_NO_RECOVERY; + +static void ata_port_suspend(struct ata_port *ap, pm_message_t mesg) +{ + ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, false); +} + +static void ata_port_suspend_async(struct ata_port *ap, pm_message_t mesg) +{ + ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, true); +} + +static int ata_port_pm_suspend(struct device *dev) +{ + struct ata_port *ap = to_ata_port(dev); + + if (pm_runtime_suspended(dev)) + return 0; + + ata_port_suspend(ap, PMSG_SUSPEND); + return 0; +} + +static int ata_port_pm_freeze(struct device *dev) +{ + struct ata_port *ap = to_ata_port(dev); + + if (pm_runtime_suspended(dev)) + return 0; + + ata_port_suspend(ap, PMSG_FREEZE); + return 0; +} + +static int ata_port_pm_poweroff(struct device *dev) +{ + ata_port_suspend(to_ata_port(dev), PMSG_HIBERNATE); + return 0; +} + +static const unsigned int ata_port_resume_ehi = ATA_EHI_NO_AUTOPSY + | ATA_EHI_QUIET; + +static void ata_port_resume(struct ata_port *ap, pm_message_t mesg) +{ + ata_port_request_pm(ap, mesg, ATA_EH_RESET, ata_port_resume_ehi, false); +} + +static void ata_port_resume_async(struct ata_port *ap, pm_message_t mesg) +{ + ata_port_request_pm(ap, mesg, ATA_EH_RESET, ata_port_resume_ehi, true); +} + +static int ata_port_pm_resume(struct device *dev) +{ + ata_port_resume_async(to_ata_port(dev), PMSG_RESUME); + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + return 0; +} + +/* + * For ODDs, the upper layer will poll for media change every few seconds, + * which will make it enter and leave suspend state every few seconds. And + * as each suspend will cause a hard/soft reset, the gain of runtime suspend + * is very little and the ODD may malfunction after constantly being reset. + * So the idle callback here will not proceed to suspend if a non-ZPODD capable + * ODD is attached to the port. + */ +static int ata_port_runtime_idle(struct device *dev) +{ + struct ata_port *ap = to_ata_port(dev); + struct ata_link *link; + struct ata_device *adev; + + ata_for_each_link(link, ap, HOST_FIRST) { + ata_for_each_dev(adev, link, ENABLED) + if (adev->class == ATA_DEV_ATAPI && + !zpodd_dev_enabled(adev)) + return -EBUSY; + } + + return 0; +} + +static int ata_port_runtime_suspend(struct device *dev) +{ + ata_port_suspend(to_ata_port(dev), PMSG_AUTO_SUSPEND); + return 0; +} + +static int ata_port_runtime_resume(struct device *dev) +{ + ata_port_resume(to_ata_port(dev), PMSG_AUTO_RESUME); + return 0; +} + +static const struct dev_pm_ops ata_port_pm_ops = { + .suspend = ata_port_pm_suspend, + .resume = ata_port_pm_resume, + .freeze = ata_port_pm_freeze, + .thaw = ata_port_pm_resume, + .poweroff = ata_port_pm_poweroff, + .restore = ata_port_pm_resume, + + .runtime_suspend = ata_port_runtime_suspend, + .runtime_resume = ata_port_runtime_resume, + .runtime_idle = ata_port_runtime_idle, +}; + +/* sas ports don't participate in pm runtime management of ata_ports, + * and need to resume ata devices at the domain level, not the per-port + * level. sas suspend/resume is async to allow parallel port recovery + * since sas has multiple ata_port instances per Scsi_Host. + */ +void ata_sas_port_suspend(struct ata_port *ap) +{ + ata_port_suspend_async(ap, PMSG_SUSPEND); +} +EXPORT_SYMBOL_GPL(ata_sas_port_suspend); + +void ata_sas_port_resume(struct ata_port *ap) +{ + ata_port_resume_async(ap, PMSG_RESUME); +} +EXPORT_SYMBOL_GPL(ata_sas_port_resume); + +/** + * ata_host_suspend - suspend host + * @host: host to suspend + * @mesg: PM message + * + * Suspend @host. Actual operation is performed by port suspend. + */ +int ata_host_suspend(struct ata_host *host, pm_message_t mesg) +{ + host->dev->power.power_state = mesg; + return 0; +} + +/** + * ata_host_resume - resume host + * @host: host to resume + * + * Resume @host. Actual operation is performed by port resume. + */ +void ata_host_resume(struct ata_host *host) +{ + host->dev->power.power_state = PMSG_ON; +} +#endif + +struct device_type ata_port_type = { + .name = "ata_port", +#ifdef CONFIG_PM + .pm = &ata_port_pm_ops, +#endif +}; + +/** + * ata_dev_init - Initialize an ata_device structure + * @dev: Device structure to initialize + * + * Initialize @dev in preparation for probing. + * + * LOCKING: + * Inherited from caller. + */ +void ata_dev_init(struct ata_device *dev) +{ + struct ata_link *link = ata_dev_phys_link(dev); + struct ata_port *ap = link->ap; + unsigned long flags; + + /* SATA spd limit is bound to the attached device, reset together */ + link->sata_spd_limit = link->hw_sata_spd_limit; + link->sata_spd = 0; + + /* High bits of dev->flags are used to record warm plug + * requests which occur asynchronously. Synchronize using + * host lock. + */ + spin_lock_irqsave(ap->lock, flags); + dev->flags &= ~ATA_DFLAG_INIT_MASK; + dev->horkage = 0; + spin_unlock_irqrestore(ap->lock, flags); + + memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0, + ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN); + dev->pio_mask = UINT_MAX; + dev->mwdma_mask = UINT_MAX; + dev->udma_mask = UINT_MAX; +} + +/** + * ata_link_init - Initialize an ata_link structure + * @ap: ATA port link is attached to + * @link: Link structure to initialize + * @pmp: Port multiplier port number + * + * Initialize @link. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp) +{ + int i; + + /* clear everything except for devices */ + memset((void *)link + ATA_LINK_CLEAR_BEGIN, 0, + ATA_LINK_CLEAR_END - ATA_LINK_CLEAR_BEGIN); + + link->ap = ap; + link->pmp = pmp; + link->active_tag = ATA_TAG_POISON; + link->hw_sata_spd_limit = UINT_MAX; + + /* can't use iterator, ap isn't initialized yet */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &link->device[i]; + + dev->link = link; + dev->devno = dev - link->device; +#ifdef CONFIG_ATA_ACPI + dev->gtf_filter = ata_acpi_gtf_filter; +#endif + ata_dev_init(dev); + } +} + +/** + * sata_link_init_config - Initialize link->sata_spd_limit and init_lpm + * @link: Link to configure sata_spd_limit and init_lpm for + * + * Initialize @link->[hw_]sata_spd_limit and @link->init_lpm to the + * currently configured value. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_link_init_config(struct ata_link *link) +{ + u8 spd; + int rc; + + rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol); + if (rc) + return rc; + + spd = (link->saved_scontrol >> 4) & 0xf; + if (spd) + link->hw_sata_spd_limit &= (1 << spd) - 1; + + ata_force_link_limits(link); + + link->sata_spd_limit = link->hw_sata_spd_limit; + + link->init_lpm = (link->saved_scontrol >> 8) & 0x7; + + return 0; +} + +/** + * ata_port_alloc - allocate and initialize basic ATA port resources + * @host: ATA host this allocated port belongs to + * + * Allocate and initialize basic ATA port resources. + * + * RETURNS: + * Allocate ATA port on success, NULL on failure. + * + * LOCKING: + * Inherited from calling layer (may sleep). + */ +struct ata_port *ata_port_alloc(struct ata_host *host) +{ + struct ata_port *ap; + + DPRINTK("ENTER\n"); + + ap = kzalloc(sizeof(*ap), GFP_KERNEL); + if (!ap) + return NULL; + + ap->pflags |= ATA_PFLAG_INITIALIZING | ATA_PFLAG_FROZEN; + ap->lock = &host->lock; + ap->print_id = -1; + ap->local_port_no = -1; + ap->host = host; + ap->dev = host->dev; + +#if defined(ATA_VERBOSE_DEBUG) + /* turn on all debugging levels */ + ap->msg_enable = 0x00FF; +#elif defined(ATA_DEBUG) + ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR; +#else + ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN; +#endif + + mutex_init(&ap->scsi_scan_mutex); + INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug); + INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan); + INIT_LIST_HEAD(&ap->eh_done_q); + init_waitqueue_head(&ap->eh_wait_q); + init_completion(&ap->park_req_pending); + init_timer_deferrable(&ap->fastdrain_timer); + ap->fastdrain_timer.function = ata_eh_fastdrain_timerfn; + ap->fastdrain_timer.data = (unsigned long)ap; + + ap->cbl = ATA_CBL_NONE; + + ata_link_init(ap, &ap->link, 0); + +#ifdef ATA_IRQ_TRAP + ap->stats.unhandled_irq = 1; + ap->stats.idle_irq = 1; +#endif + ata_sff_port_init(ap); + + return ap; +} + +static void ata_host_release(struct device *gendev, void *res) +{ + struct ata_host *host = dev_get_drvdata(gendev); + int i; + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + if (!ap) + continue; + + if (ap->scsi_host) + scsi_host_put(ap->scsi_host); + + kfree(ap->pmp_link); + kfree(ap->slave_link); + kfree(ap); + host->ports[i] = NULL; + } + + dev_set_drvdata(gendev, NULL); +} + +/** + * ata_host_alloc - allocate and init basic ATA host resources + * @dev: generic device this host is associated with + * @max_ports: maximum number of ATA ports associated with this host + * + * Allocate and initialize basic ATA host resources. LLD calls + * this function to allocate a host, initializes it fully and + * attaches it using ata_host_register(). + * + * @max_ports ports are allocated and host->n_ports is + * initialized to @max_ports. The caller is allowed to decrease + * host->n_ports before calling ata_host_register(). The unused + * ports will be automatically freed on registration. + * + * RETURNS: + * Allocate ATA host on success, NULL on failure. + * + * LOCKING: + * Inherited from calling layer (may sleep). + */ +struct ata_host *ata_host_alloc(struct device *dev, int max_ports) +{ + struct ata_host *host; + size_t sz; + int i; + + DPRINTK("ENTER\n"); + + if (!devres_open_group(dev, NULL, GFP_KERNEL)) + return NULL; + + /* alloc a container for our list of ATA ports (buses) */ + sz = sizeof(struct ata_host) + (max_ports + 1) * sizeof(void *); + /* alloc a container for our list of ATA ports (buses) */ + host = devres_alloc(ata_host_release, sz, GFP_KERNEL); + if (!host) + goto err_out; + + devres_add(dev, host); + dev_set_drvdata(dev, host); + + spin_lock_init(&host->lock); + mutex_init(&host->eh_mutex); + host->dev = dev; + host->n_ports = max_ports; + + /* allocate ports bound to this host */ + for (i = 0; i < max_ports; i++) { + struct ata_port *ap; + + ap = ata_port_alloc(host); + if (!ap) + goto err_out; + + ap->port_no = i; + host->ports[i] = ap; + } + + devres_remove_group(dev, NULL); + return host; + + err_out: + devres_release_group(dev, NULL); + return NULL; +} + +/** + * ata_host_alloc_pinfo - alloc host and init with port_info array + * @dev: generic device this host is associated with + * @ppi: array of ATA port_info to initialize host with + * @n_ports: number of ATA ports attached to this host + * + * Allocate ATA host and initialize with info from @ppi. If NULL + * terminated, @ppi may contain fewer entries than @n_ports. The + * last entry will be used for the remaining ports. + * + * RETURNS: + * Allocate ATA host on success, NULL on failure. + * + * LOCKING: + * Inherited from calling layer (may sleep). + */ +struct ata_host *ata_host_alloc_pinfo(struct device *dev, + const struct ata_port_info * const * ppi, + int n_ports) +{ + const struct ata_port_info *pi; + struct ata_host *host; + int i, j; + + host = ata_host_alloc(dev, n_ports); + if (!host) + return NULL; + + for (i = 0, j = 0, pi = NULL; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + if (ppi[j]) + pi = ppi[j++]; + + ap->pio_mask = pi->pio_mask; + ap->mwdma_mask = pi->mwdma_mask; + ap->udma_mask = pi->udma_mask; + ap->flags |= pi->flags; + ap->link.flags |= pi->link_flags; + ap->ops = pi->port_ops; + + if (!host->ops && (pi->port_ops != &ata_dummy_port_ops)) + host->ops = pi->port_ops; + } + + return host; +} + +/** + * ata_slave_link_init - initialize slave link + * @ap: port to initialize slave link for + * + * Create and initialize slave link for @ap. This enables slave + * link handling on the port. + * + * In libata, a port contains links and a link contains devices. + * There is single host link but if a PMP is attached to it, + * there can be multiple fan-out links. On SATA, there's usually + * a single device connected to a link but PATA and SATA + * controllers emulating TF based interface can have two - master + * and slave. + * + * However, there are a few controllers which don't fit into this + * abstraction too well - SATA controllers which emulate TF + * interface with both master and slave devices but also have + * separate SCR register sets for each device. These controllers + * need separate links for physical link handling + * (e.g. onlineness, link speed) but should be treated like a + * traditional M/S controller for everything else (e.g. command + * issue, softreset). + * + * slave_link is libata's way of handling this class of + * controllers without impacting core layer too much. For + * anything other than physical link handling, the default host + * link is used for both master and slave. For physical link + * handling, separate @ap->slave_link is used. All dirty details + * are implemented inside libata core layer. From LLD's POV, the + * only difference is that prereset, hardreset and postreset are + * called once more for the slave link, so the reset sequence + * looks like the following. + * + * prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> + * softreset(M) -> postreset(M) -> postreset(S) + * + * Note that softreset is called only for the master. Softreset + * resets both M/S by definition, so SRST on master should handle + * both (the standard method will work just fine). + * + * LOCKING: + * Should be called before host is registered. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int ata_slave_link_init(struct ata_port *ap) +{ + struct ata_link *link; + + WARN_ON(ap->slave_link); + WARN_ON(ap->flags & ATA_FLAG_PMP); + + link = kzalloc(sizeof(*link), GFP_KERNEL); + if (!link) + return -ENOMEM; + + ata_link_init(ap, link, 1); + ap->slave_link = link; + return 0; +} + +static void ata_host_stop(struct device *gendev, void *res) +{ + struct ata_host *host = dev_get_drvdata(gendev); + int i; + + WARN_ON(!(host->flags & ATA_HOST_STARTED)); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + if (ap->ops->port_stop) + ap->ops->port_stop(ap); + } + + if (host->ops->host_stop) + host->ops->host_stop(host); +} + +/** + * ata_finalize_port_ops - finalize ata_port_operations + * @ops: ata_port_operations to finalize + * + * An ata_port_operations can inherit from another ops and that + * ops can again inherit from another. This can go on as many + * times as necessary as long as there is no loop in the + * inheritance chain. + * + * Ops tables are finalized when the host is started. NULL or + * unspecified entries are inherited from the closet ancestor + * which has the method and the entry is populated with it. + * After finalization, the ops table directly points to all the + * methods and ->inherits is no longer necessary and cleared. + * + * Using ATA_OP_NULL, inheriting ops can force a method to NULL. + * + * LOCKING: + * None. + */ +static void ata_finalize_port_ops(struct ata_port_operations *ops) +{ + static DEFINE_SPINLOCK(lock); + const struct ata_port_operations *cur; + void **begin = (void **)ops; + void **end = (void **)&ops->inherits; + void **pp; + + if (!ops || !ops->inherits) + return; + + spin_lock(&lock); + + for (cur = ops->inherits; cur; cur = cur->inherits) { + void **inherit = (void **)cur; + + for (pp = begin; pp < end; pp++, inherit++) + if (!*pp) + *pp = *inherit; + } + + for (pp = begin; pp < end; pp++) + if (IS_ERR(*pp)) + *pp = NULL; + + ops->inherits = NULL; + + spin_unlock(&lock); +} + +/** + * ata_host_start - start and freeze ports of an ATA host + * @host: ATA host to start ports for + * + * Start and then freeze ports of @host. Started status is + * recorded in host->flags, so this function can be called + * multiple times. Ports are guaranteed to get started only + * once. If host->ops isn't initialized yet, its set to the + * first non-dummy port ops. + * + * LOCKING: + * Inherited from calling layer (may sleep). + * + * RETURNS: + * 0 if all ports are started successfully, -errno otherwise. + */ +int ata_host_start(struct ata_host *host) +{ + int have_stop = 0; + void *start_dr = NULL; + int i, rc; + + if (host->flags & ATA_HOST_STARTED) + return 0; + + ata_finalize_port_ops(host->ops); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + ata_finalize_port_ops(ap->ops); + + if (!host->ops && !ata_port_is_dummy(ap)) + host->ops = ap->ops; + + if (ap->ops->port_stop) + have_stop = 1; + } + + if (host->ops->host_stop) + have_stop = 1; + + if (have_stop) { + start_dr = devres_alloc(ata_host_stop, 0, GFP_KERNEL); + if (!start_dr) + return -ENOMEM; + } + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + if (ap->ops->port_start) { + rc = ap->ops->port_start(ap); + if (rc) { + if (rc != -ENODEV) + dev_err(host->dev, + "failed to start port %d (errno=%d)\n", + i, rc); + goto err_out; + } + } + ata_eh_freeze_port(ap); + } + + if (start_dr) + devres_add(host->dev, start_dr); + host->flags |= ATA_HOST_STARTED; + return 0; + + err_out: + while (--i >= 0) { + struct ata_port *ap = host->ports[i]; + + if (ap->ops->port_stop) + ap->ops->port_stop(ap); + } + devres_free(start_dr); + return rc; +} + +/** + * ata_sas_host_init - Initialize a host struct for sas (ipr, libsas) + * @host: host to initialize + * @dev: device host is attached to + * @ops: port_ops + * + */ +void ata_host_init(struct ata_host *host, struct device *dev, + struct ata_port_operations *ops) +{ + spin_lock_init(&host->lock); + mutex_init(&host->eh_mutex); + host->n_tags = ATA_MAX_QUEUE - 1; + host->dev = dev; + host->ops = ops; +} + +void __ata_port_probe(struct ata_port *ap) +{ + struct ata_eh_info *ehi = &ap->link.eh_info; + unsigned long flags; + + /* kick EH for boot probing */ + spin_lock_irqsave(ap->lock, flags); + + ehi->probe_mask |= ATA_ALL_DEVICES; + ehi->action |= ATA_EH_RESET; + ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; + + ap->pflags &= ~ATA_PFLAG_INITIALIZING; + ap->pflags |= ATA_PFLAG_LOADING; + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); +} + +int ata_port_probe(struct ata_port *ap) +{ + int rc = 0; + + if (ap->ops->error_handler) { + __ata_port_probe(ap); + ata_port_wait_eh(ap); + } else { + DPRINTK("ata%u: bus probe begin\n", ap->print_id); + rc = ata_bus_probe(ap); + DPRINTK("ata%u: bus probe end\n", ap->print_id); + } + return rc; +} + + +static void async_port_probe(void *data, async_cookie_t cookie) +{ + struct ata_port *ap = data; + + /* + * If we're not allowed to scan this host in parallel, + * we need to wait until all previous scans have completed + * before going further. + * Jeff Garzik says this is only within a controller, so we + * don't need to wait for port 0, only for later ports. + */ + if (!(ap->host->flags & ATA_HOST_PARALLEL_SCAN) && ap->port_no != 0) + async_synchronize_cookie(cookie); + + (void)ata_port_probe(ap); + + /* in order to keep device order, we need to synchronize at this point */ + async_synchronize_cookie(cookie); + + ata_scsi_scan_host(ap, 1); +} + +/** + * ata_host_register - register initialized ATA host + * @host: ATA host to register + * @sht: template for SCSI host + * + * Register initialized ATA host. @host is allocated using + * ata_host_alloc() and fully initialized by LLD. This function + * starts ports, registers @host with ATA and SCSI layers and + * probe registered devices. + * + * LOCKING: + * Inherited from calling layer (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) +{ + int i, rc; + + host->n_tags = clamp(sht->can_queue, 1, ATA_MAX_QUEUE - 1); + + /* host must have been started */ + if (!(host->flags & ATA_HOST_STARTED)) { + dev_err(host->dev, "BUG: trying to register unstarted host\n"); + WARN_ON(1); + return -EINVAL; + } + + /* Blow away unused ports. This happens when LLD can't + * determine the exact number of ports to allocate at + * allocation time. + */ + for (i = host->n_ports; host->ports[i]; i++) + kfree(host->ports[i]); + + /* give ports names and add SCSI hosts */ + for (i = 0; i < host->n_ports; i++) { + host->ports[i]->print_id = atomic_inc_return(&ata_print_id); + host->ports[i]->local_port_no = i + 1; + } + + /* Create associated sysfs transport objects */ + for (i = 0; i < host->n_ports; i++) { + rc = ata_tport_add(host->dev,host->ports[i]); + if (rc) { + goto err_tadd; + } + } + + rc = ata_scsi_add_hosts(host, sht); + if (rc) + goto err_tadd; + + /* set cable, sata_spd_limit and report */ + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + unsigned long xfer_mask; + + /* set SATA cable type if still unset */ + if (ap->cbl == ATA_CBL_NONE && (ap->flags & ATA_FLAG_SATA)) + ap->cbl = ATA_CBL_SATA; + + /* init sata_spd_limit to the current value */ + sata_link_init_config(&ap->link); + if (ap->slave_link) + sata_link_init_config(ap->slave_link); + + /* print per-port info to dmesg */ + xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, + ap->udma_mask); + + if (!ata_port_is_dummy(ap)) { + ata_port_info(ap, "%cATA max %s %s\n", + (ap->flags & ATA_FLAG_SATA) ? 'S' : 'P', + ata_mode_string(xfer_mask), + ap->link.eh_info.desc); + ata_ehi_clear_desc(&ap->link.eh_info); + } else + ata_port_info(ap, "DUMMY\n"); + } + + /* perform each probe asynchronously */ + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + async_schedule(async_port_probe, ap); + } + + return 0; + + err_tadd: + while (--i >= 0) { + ata_tport_delete(host->ports[i]); + } + return rc; + +} + +/** + * ata_host_activate - start host, request IRQ and register it + * @host: target ATA host + * @irq: IRQ to request + * @irq_handler: irq_handler used when requesting IRQ + * @irq_flags: irq_flags used when requesting IRQ + * @sht: scsi_host_template to use when registering the host + * + * After allocating an ATA host and initializing it, most libata + * LLDs perform three steps to activate the host - start host, + * request IRQ and register it. This helper takes necessasry + * arguments and performs the three steps in one go. + * + * An invalid IRQ skips the IRQ registration and expects the host to + * have set polling mode on the port. In this case, @irq_handler + * should be NULL. + * + * LOCKING: + * Inherited from calling layer (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_host_activate(struct ata_host *host, int irq, + irq_handler_t irq_handler, unsigned long irq_flags, + struct scsi_host_template *sht) +{ + int i, rc; + + rc = ata_host_start(host); + if (rc) + return rc; + + /* Special case for polling mode */ + if (!irq) { + WARN_ON(irq_handler); + return ata_host_register(host, sht); + } + + rc = devm_request_irq(host->dev, irq, irq_handler, irq_flags, + dev_name(host->dev), host); + if (rc) + return rc; + + for (i = 0; i < host->n_ports; i++) + ata_port_desc(host->ports[i], "irq %d", irq); + + rc = ata_host_register(host, sht); + /* if failed, just free the IRQ and leave ports alone */ + if (rc) + devm_free_irq(host->dev, irq, host); + + return rc; +} + +/** + * ata_port_detach - Detach ATA port in prepration of device removal + * @ap: ATA port to be detached + * + * Detach all ATA devices and the associated SCSI devices of @ap; + * then, remove the associated SCSI host. @ap is guaranteed to + * be quiescent on return from this function. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_port_detach(struct ata_port *ap) +{ + unsigned long flags; + struct ata_link *link; + struct ata_device *dev; + + if (!ap->ops->error_handler) + goto skip_eh; + + /* tell EH we're leaving & flush EH */ + spin_lock_irqsave(ap->lock, flags); + ap->pflags |= ATA_PFLAG_UNLOADING; + ata_port_schedule_eh(ap); + spin_unlock_irqrestore(ap->lock, flags); + + /* wait till EH commits suicide */ + ata_port_wait_eh(ap); + + /* it better be dead now */ + WARN_ON(!(ap->pflags & ATA_PFLAG_UNLOADED)); + + cancel_delayed_work_sync(&ap->hotplug_task); + + skip_eh: + /* clean up zpodd on port removal */ + ata_for_each_link(link, ap, HOST_FIRST) { + ata_for_each_dev(dev, link, ALL) { + if (zpodd_dev_enabled(dev)) + zpodd_exit(dev); + } + } + if (ap->pmp_link) { + int i; + for (i = 0; i < SATA_PMP_MAX_PORTS; i++) + ata_tlink_delete(&ap->pmp_link[i]); + } + /* remove the associated SCSI host */ + scsi_remove_host(ap->scsi_host); + ata_tport_delete(ap); +} + +/** + * ata_host_detach - Detach all ports of an ATA host + * @host: Host to detach + * + * Detach all ports of @host. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_host_detach(struct ata_host *host) +{ + int i; + + for (i = 0; i < host->n_ports; i++) + ata_port_detach(host->ports[i]); + + /* the host is dead now, dissociate ACPI */ + ata_acpi_dissociate(host); +} + +#ifdef CONFIG_PCI + +/** + * ata_pci_remove_one - PCI layer callback for device removal + * @pdev: PCI device that was removed + * + * PCI layer indicates to libata via this hook that hot-unplug or + * module unload event has occurred. Detach all ports. Resource + * release is handled via devres. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + */ +void ata_pci_remove_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + + ata_host_detach(host); +} + +/* move to PCI subsystem */ +int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) +{ + unsigned long tmp = 0; + + switch (bits->width) { + case 1: { + u8 tmp8 = 0; + pci_read_config_byte(pdev, bits->reg, &tmp8); + tmp = tmp8; + break; + } + case 2: { + u16 tmp16 = 0; + pci_read_config_word(pdev, bits->reg, &tmp16); + tmp = tmp16; + break; + } + case 4: { + u32 tmp32 = 0; + pci_read_config_dword(pdev, bits->reg, &tmp32); + tmp = tmp32; + break; + } + + default: + return -EINVAL; + } + + tmp &= bits->mask; + + return (tmp == bits->val) ? 1 : 0; +} + +#ifdef CONFIG_PM +void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + pci_save_state(pdev); + pci_disable_device(pdev); + + if (mesg.event & PM_EVENT_SLEEP) + pci_set_power_state(pdev, PCI_D3hot); +} + +int ata_pci_device_do_resume(struct pci_dev *pdev) +{ + int rc; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + rc = pcim_enable_device(pdev); + if (rc) { + dev_err(&pdev->dev, + "failed to enable device after resume (%d)\n", rc); + return rc; + } + + pci_set_master(pdev); + return 0; +} + +int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc = 0; + + rc = ata_host_suspend(host, mesg); + if (rc) + return rc; + + ata_pci_device_do_suspend(pdev, mesg); + + return 0; +} + +int ata_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc == 0) + ata_host_resume(host); + return rc; +} +#endif /* CONFIG_PM */ + +#endif /* CONFIG_PCI */ + +/** + * ata_platform_remove_one - Platform layer callback for device removal + * @pdev: Platform device that was removed + * + * Platform layer indicates to libata via this hook that hot-unplug or + * module unload event has occurred. Detach all ports. Resource + * release is handled via devres. + * + * LOCKING: + * Inherited from platform layer (may sleep). + */ +int ata_platform_remove_one(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + + ata_host_detach(host); + + return 0; +} + +static int __init ata_parse_force_one(char **cur, + struct ata_force_ent *force_ent, + const char **reason) +{ + /* FIXME: Currently, there's no way to tag init const data and + * using __initdata causes build failure on some versions of + * gcc. Once __initdataconst is implemented, add const to the + * following structure. + */ + static struct ata_force_param force_tbl[] __initdata = { + { "40c", .cbl = ATA_CBL_PATA40 }, + { "80c", .cbl = ATA_CBL_PATA80 }, + { "short40c", .cbl = ATA_CBL_PATA40_SHORT }, + { "unk", .cbl = ATA_CBL_PATA_UNK }, + { "ign", .cbl = ATA_CBL_PATA_IGN }, + { "sata", .cbl = ATA_CBL_SATA }, + { "1.5Gbps", .spd_limit = 1 }, + { "3.0Gbps", .spd_limit = 2 }, + { "noncq", .horkage_on = ATA_HORKAGE_NONCQ }, + { "ncq", .horkage_off = ATA_HORKAGE_NONCQ }, + { "dump_id", .horkage_on = ATA_HORKAGE_DUMP_ID }, + { "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) }, + { "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) }, + { "pio2", .xfer_mask = 1 << (ATA_SHIFT_PIO + 2) }, + { "pio3", .xfer_mask = 1 << (ATA_SHIFT_PIO + 3) }, + { "pio4", .xfer_mask = 1 << (ATA_SHIFT_PIO + 4) }, + { "pio5", .xfer_mask = 1 << (ATA_SHIFT_PIO + 5) }, + { "pio6", .xfer_mask = 1 << (ATA_SHIFT_PIO + 6) }, + { "mwdma0", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 0) }, + { "mwdma1", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 1) }, + { "mwdma2", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 2) }, + { "mwdma3", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 3) }, + { "mwdma4", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 4) }, + { "udma0", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) }, + { "udma16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) }, + { "udma/16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) }, + { "udma1", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) }, + { "udma25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) }, + { "udma/25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) }, + { "udma2", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) }, + { "udma33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) }, + { "udma/33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) }, + { "udma3", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) }, + { "udma44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) }, + { "udma/44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) }, + { "udma4", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) }, + { "udma66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) }, + { "udma/66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) }, + { "udma5", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) }, + { "udma100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) }, + { "udma/100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) }, + { "udma6", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) }, + { "udma133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) }, + { "udma/133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) }, + { "udma7", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 7) }, + { "nohrst", .lflags = ATA_LFLAG_NO_HRST }, + { "nosrst", .lflags = ATA_LFLAG_NO_SRST }, + { "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST }, + { "rstonce", .lflags = ATA_LFLAG_RST_ONCE }, + { "atapi_dmadir", .horkage_on = ATA_HORKAGE_ATAPI_DMADIR }, + { "disable", .horkage_on = ATA_HORKAGE_DISABLE }, + }; + char *start = *cur, *p = *cur; + char *id, *val, *endp; + const struct ata_force_param *match_fp = NULL; + int nr_matches = 0, i; + + /* find where this param ends and update *cur */ + while (*p != '\0' && *p != ',') + p++; + + if (*p == '\0') + *cur = p; + else + *cur = p + 1; + + *p = '\0'; + + /* parse */ + p = strchr(start, ':'); + if (!p) { + val = strstrip(start); + goto parse_val; + } + *p = '\0'; + + id = strstrip(start); + val = strstrip(p + 1); + + /* parse id */ + p = strchr(id, '.'); + if (p) { + *p++ = '\0'; + force_ent->device = simple_strtoul(p, &endp, 10); + if (p == endp || *endp != '\0') { + *reason = "invalid device"; + return -EINVAL; + } + } + + force_ent->port = simple_strtoul(id, &endp, 10); + if (p == endp || *endp != '\0') { + *reason = "invalid port/link"; + return -EINVAL; + } + + parse_val: + /* parse val, allow shortcuts so that both 1.5 and 1.5Gbps work */ + for (i = 0; i < ARRAY_SIZE(force_tbl); i++) { + const struct ata_force_param *fp = &force_tbl[i]; + + if (strncasecmp(val, fp->name, strlen(val))) + continue; + + nr_matches++; + match_fp = fp; + + if (strcasecmp(val, fp->name) == 0) { + nr_matches = 1; + break; + } + } + + if (!nr_matches) { + *reason = "unknown value"; + return -EINVAL; + } + if (nr_matches > 1) { + *reason = "ambigious value"; + return -EINVAL; + } + + force_ent->param = *match_fp; + + return 0; +} + +static void __init ata_parse_force_param(void) +{ + int idx = 0, size = 1; + int last_port = -1, last_device = -1; + char *p, *cur, *next; + + /* calculate maximum number of params and allocate force_tbl */ + for (p = ata_force_param_buf; *p; p++) + if (*p == ',') + size++; + + ata_force_tbl = kzalloc(sizeof(ata_force_tbl[0]) * size, GFP_KERNEL); + if (!ata_force_tbl) { + printk(KERN_WARNING "ata: failed to extend force table, " + "libata.force ignored\n"); + return; + } + + /* parse and populate the table */ + for (cur = ata_force_param_buf; *cur != '\0'; cur = next) { + const char *reason = ""; + struct ata_force_ent te = { .port = -1, .device = -1 }; + + next = cur; + if (ata_parse_force_one(&next, &te, &reason)) { + printk(KERN_WARNING "ata: failed to parse force " + "parameter \"%s\" (%s)\n", + cur, reason); + continue; + } + + if (te.port == -1) { + te.port = last_port; + te.device = last_device; + } + + ata_force_tbl[idx++] = te; + + last_port = te.port; + last_device = te.device; + } + + ata_force_tbl_size = idx; +} + +static int __init ata_init(void) +{ + int rc; + + ata_parse_force_param(); + + rc = ata_sff_init(); + if (rc) { + kfree(ata_force_tbl); + return rc; + } + + libata_transport_init(); + ata_scsi_transport_template = ata_attach_transport(); + if (!ata_scsi_transport_template) { + ata_sff_exit(); + rc = -ENOMEM; + goto err_out; + } + + printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n"); + return 0; + +err_out: + return rc; +} + +static void __exit ata_exit(void) +{ + ata_release_transport(ata_scsi_transport_template); + libata_transport_exit(); + ata_sff_exit(); + kfree(ata_force_tbl); +} + +subsys_initcall(ata_init); +module_exit(ata_exit); + +static DEFINE_RATELIMIT_STATE(ratelimit, HZ / 5, 1); + +int ata_ratelimit(void) +{ + return __ratelimit(&ratelimit); +} + +/** + * ata_msleep - ATA EH owner aware msleep + * @ap: ATA port to attribute the sleep to + * @msecs: duration to sleep in milliseconds + * + * Sleeps @msecs. If the current task is owner of @ap's EH, the + * ownership is released before going to sleep and reacquired + * after the sleep is complete. IOW, other ports sharing the + * @ap->host will be allowed to own the EH while this task is + * sleeping. + * + * LOCKING: + * Might sleep. + */ +void ata_msleep(struct ata_port *ap, unsigned int msecs) +{ + bool owns_eh = ap && ap->host->eh_owner == current; + + if (owns_eh) + ata_eh_release(ap); + + msleep(msecs); + + if (owns_eh) + ata_eh_acquire(ap); +} + +/** + * ata_wait_register - wait until register value changes + * @ap: ATA port to wait register for, can be NULL + * @reg: IO-mapped register + * @mask: Mask to apply to read register value + * @val: Wait condition + * @interval: polling interval in milliseconds + * @timeout: timeout in milliseconds + * + * Waiting for some bits of register to change is a common + * operation for ATA controllers. This function reads 32bit LE + * IO-mapped register @reg and tests for the following condition. + * + * (*@reg & mask) != val + * + * If the condition is met, it returns; otherwise, the process is + * repeated after @interval_msec until timeout. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * The final register value. + */ +u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val, + unsigned long interval, unsigned long timeout) +{ + unsigned long deadline; + u32 tmp; + + tmp = ioread32(reg); + + /* Calculate timeout _after_ the first read to make sure + * preceding writes reach the controller before starting to + * eat away the timeout. + */ + deadline = ata_deadline(jiffies, timeout); + + while ((tmp & mask) == val && time_before(jiffies, deadline)) { + ata_msleep(ap, interval); + tmp = ioread32(reg); + } + + return tmp; +} + +/** + * sata_lpm_ignore_phy_events - test if PHY event should be ignored + * @link: Link receiving the event + * + * Test whether the received PHY event has to be ignored or not. + * + * LOCKING: + * None: + * + * RETURNS: + * True if the event has to be ignored. + */ +bool sata_lpm_ignore_phy_events(struct ata_link *link) +{ + unsigned long lpm_timeout = link->last_lpm_change + + msecs_to_jiffies(ATA_TMOUT_SPURIOUS_PHY); + + /* if LPM is enabled, PHYRDY doesn't mean anything */ + if (link->lpm_policy > ATA_LPM_MAX_POWER) + return true; + + /* ignore the first PHY event after the LPM policy changed + * as it is might be spurious + */ + if ((link->flags & ATA_LFLAG_CHANGED) && + time_before(jiffies, lpm_timeout)) + return true; + + return false; +} +EXPORT_SYMBOL_GPL(sata_lpm_ignore_phy_events); + +/* + * Dummy port_ops + */ +static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc) +{ + return AC_ERR_SYSTEM; +} + +static void ata_dummy_error_handler(struct ata_port *ap) +{ + /* truly dummy */ +} + +struct ata_port_operations ata_dummy_port_ops = { + .qc_prep = ata_noop_qc_prep, + .qc_issue = ata_dummy_qc_issue, + .error_handler = ata_dummy_error_handler, + .sched_eh = ata_std_sched_eh, + .end_eh = ata_std_end_eh, +}; + +const struct ata_port_info ata_dummy_port_info = { + .port_ops = &ata_dummy_port_ops, +}; + +/* + * Utility print functions + */ +void ata_port_printk(const struct ata_port *ap, const char *level, + const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; + + printk("%sata%u: %pV", level, ap->print_id, &vaf); + + va_end(args); +} +EXPORT_SYMBOL(ata_port_printk); + +void ata_link_printk(const struct ata_link *link, const char *level, + const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; + + if (sata_pmp_attached(link->ap) || link->ap->slave_link) + printk("%sata%u.%02u: %pV", + level, link->ap->print_id, link->pmp, &vaf); + else + printk("%sata%u: %pV", + level, link->ap->print_id, &vaf); + + va_end(args); +} +EXPORT_SYMBOL(ata_link_printk); + +void ata_dev_printk(const struct ata_device *dev, const char *level, + const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; + + printk("%sata%u.%02u: %pV", + level, dev->link->ap->print_id, dev->link->pmp + dev->devno, + &vaf); + + va_end(args); +} +EXPORT_SYMBOL(ata_dev_printk); + +void ata_print_version(const struct device *dev, const char *version) +{ + dev_printk(KERN_DEBUG, dev, "version %s\n", version); +} +EXPORT_SYMBOL(ata_print_version); + +/* + * libata is essentially a library of internal helper functions for + * low-level ATA host controller drivers. As such, the API/ABI is + * likely to change as new drivers are added and updated. + * Do not depend on ABI/API stability. + */ +EXPORT_SYMBOL_GPL(sata_deb_timing_normal); +EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); +EXPORT_SYMBOL_GPL(sata_deb_timing_long); +EXPORT_SYMBOL_GPL(ata_base_port_ops); +EXPORT_SYMBOL_GPL(sata_port_ops); +EXPORT_SYMBOL_GPL(ata_dummy_port_ops); +EXPORT_SYMBOL_GPL(ata_dummy_port_info); +EXPORT_SYMBOL_GPL(ata_link_next); +EXPORT_SYMBOL_GPL(ata_dev_next); +EXPORT_SYMBOL_GPL(ata_std_bios_param); +EXPORT_SYMBOL_GPL(ata_scsi_unlock_native_capacity); +EXPORT_SYMBOL_GPL(ata_host_init); +EXPORT_SYMBOL_GPL(ata_host_alloc); +EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo); +EXPORT_SYMBOL_GPL(ata_slave_link_init); +EXPORT_SYMBOL_GPL(ata_host_start); +EXPORT_SYMBOL_GPL(ata_host_register); +EXPORT_SYMBOL_GPL(ata_host_activate); +EXPORT_SYMBOL_GPL(ata_host_detach); +EXPORT_SYMBOL_GPL(ata_sg_init); +EXPORT_SYMBOL_GPL(ata_qc_complete); +EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); +EXPORT_SYMBOL_GPL(atapi_cmd_type); +EXPORT_SYMBOL_GPL(ata_tf_to_fis); +EXPORT_SYMBOL_GPL(ata_tf_from_fis); +EXPORT_SYMBOL_GPL(ata_pack_xfermask); +EXPORT_SYMBOL_GPL(ata_unpack_xfermask); +EXPORT_SYMBOL_GPL(ata_xfer_mask2mode); +EXPORT_SYMBOL_GPL(ata_xfer_mode2mask); +EXPORT_SYMBOL_GPL(ata_xfer_mode2shift); +EXPORT_SYMBOL_GPL(ata_mode_string); +EXPORT_SYMBOL_GPL(ata_id_xfermask); +EXPORT_SYMBOL_GPL(ata_do_set_mode); +EXPORT_SYMBOL_GPL(ata_std_qc_defer); +EXPORT_SYMBOL_GPL(ata_noop_qc_prep); +EXPORT_SYMBOL_GPL(ata_dev_disable); +EXPORT_SYMBOL_GPL(sata_set_spd); +EXPORT_SYMBOL_GPL(ata_wait_after_reset); +EXPORT_SYMBOL_GPL(sata_link_debounce); +EXPORT_SYMBOL_GPL(sata_link_resume); +EXPORT_SYMBOL_GPL(sata_link_scr_lpm); +EXPORT_SYMBOL_GPL(ata_std_prereset); +EXPORT_SYMBOL_GPL(sata_link_hardreset); +EXPORT_SYMBOL_GPL(sata_std_hardreset); +EXPORT_SYMBOL_GPL(ata_std_postreset); +EXPORT_SYMBOL_GPL(ata_dev_classify); +EXPORT_SYMBOL_GPL(ata_dev_pair); +EXPORT_SYMBOL_GPL(ata_ratelimit); +EXPORT_SYMBOL_GPL(ata_msleep); +EXPORT_SYMBOL_GPL(ata_wait_register); +EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); +EXPORT_SYMBOL_GPL(ata_scsi_slave_config); +EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy); +EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); +EXPORT_SYMBOL_GPL(__ata_change_queue_depth); +EXPORT_SYMBOL_GPL(sata_scr_valid); +EXPORT_SYMBOL_GPL(sata_scr_read); +EXPORT_SYMBOL_GPL(sata_scr_write); +EXPORT_SYMBOL_GPL(sata_scr_write_flush); +EXPORT_SYMBOL_GPL(ata_link_online); +EXPORT_SYMBOL_GPL(ata_link_offline); +#ifdef CONFIG_PM +EXPORT_SYMBOL_GPL(ata_host_suspend); +EXPORT_SYMBOL_GPL(ata_host_resume); +#endif /* CONFIG_PM */ +EXPORT_SYMBOL_GPL(ata_id_string); +EXPORT_SYMBOL_GPL(ata_id_c_string); +EXPORT_SYMBOL_GPL(ata_do_dev_read_id); +EXPORT_SYMBOL_GPL(ata_scsi_simulate); + +EXPORT_SYMBOL_GPL(ata_pio_need_iordy); +EXPORT_SYMBOL_GPL(ata_timing_find_mode); +EXPORT_SYMBOL_GPL(ata_timing_compute); +EXPORT_SYMBOL_GPL(ata_timing_merge); +EXPORT_SYMBOL_GPL(ata_timing_cycle2mode); + +#ifdef CONFIG_PCI +EXPORT_SYMBOL_GPL(pci_test_config_bits); +EXPORT_SYMBOL_GPL(ata_pci_remove_one); +#ifdef CONFIG_PM +EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend); +EXPORT_SYMBOL_GPL(ata_pci_device_do_resume); +EXPORT_SYMBOL_GPL(ata_pci_device_suspend); +EXPORT_SYMBOL_GPL(ata_pci_device_resume); +#endif /* CONFIG_PM */ +#endif /* CONFIG_PCI */ + +EXPORT_SYMBOL_GPL(ata_platform_remove_one); + +EXPORT_SYMBOL_GPL(__ata_ehi_push_desc); +EXPORT_SYMBOL_GPL(ata_ehi_push_desc); +EXPORT_SYMBOL_GPL(ata_ehi_clear_desc); +EXPORT_SYMBOL_GPL(ata_port_desc); +#ifdef CONFIG_PCI +EXPORT_SYMBOL_GPL(ata_port_pbar_desc); +#endif /* CONFIG_PCI */ +EXPORT_SYMBOL_GPL(ata_port_schedule_eh); +EXPORT_SYMBOL_GPL(ata_link_abort); +EXPORT_SYMBOL_GPL(ata_port_abort); +EXPORT_SYMBOL_GPL(ata_port_freeze); +EXPORT_SYMBOL_GPL(sata_async_notification); +EXPORT_SYMBOL_GPL(ata_eh_freeze_port); +EXPORT_SYMBOL_GPL(ata_eh_thaw_port); +EXPORT_SYMBOL_GPL(ata_eh_qc_complete); +EXPORT_SYMBOL_GPL(ata_eh_qc_retry); +EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error); +EXPORT_SYMBOL_GPL(ata_do_eh); +EXPORT_SYMBOL_GPL(ata_std_error_handler); + +EXPORT_SYMBOL_GPL(ata_cable_40wire); +EXPORT_SYMBOL_GPL(ata_cable_80wire); +EXPORT_SYMBOL_GPL(ata_cable_unknown); +EXPORT_SYMBOL_GPL(ata_cable_ignore); +EXPORT_SYMBOL_GPL(ata_cable_sata); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c new file mode 100644 index 000000000..ee2e188e1 --- /dev/null +++ b/drivers/ata/libata-eh.c @@ -0,0 +1,4265 @@ +/* + * libata-eh.c - libata error handling + * + * Maintained by: Tejun Heo + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2006 Tejun Heo + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, + * USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from http://www.t13.org/ and + * http://www.sata-io.org/ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../scsi/scsi_transport_api.h" + +#include + +#include +#include "libata.h" + +enum { + /* speed down verdicts */ + ATA_EH_SPDN_NCQ_OFF = (1 << 0), + ATA_EH_SPDN_SPEED_DOWN = (1 << 1), + ATA_EH_SPDN_FALLBACK_TO_PIO = (1 << 2), + ATA_EH_SPDN_KEEP_ERRORS = (1 << 3), + + /* error flags */ + ATA_EFLAG_IS_IO = (1 << 0), + ATA_EFLAG_DUBIOUS_XFER = (1 << 1), + ATA_EFLAG_OLD_ER = (1 << 31), + + /* error categories */ + ATA_ECAT_NONE = 0, + ATA_ECAT_ATA_BUS = 1, + ATA_ECAT_TOUT_HSM = 2, + ATA_ECAT_UNK_DEV = 3, + ATA_ECAT_DUBIOUS_NONE = 4, + ATA_ECAT_DUBIOUS_ATA_BUS = 5, + ATA_ECAT_DUBIOUS_TOUT_HSM = 6, + ATA_ECAT_DUBIOUS_UNK_DEV = 7, + ATA_ECAT_NR = 8, + + ATA_EH_CMD_DFL_TIMEOUT = 5000, + + /* always put at least this amount of time between resets */ + ATA_EH_RESET_COOL_DOWN = 5000, + + /* Waiting in ->prereset can never be reliable. It's + * sometimes nice to wait there but it can't be depended upon; + * otherwise, we wouldn't be resetting. Just give it enough + * time for most drives to spin up. + */ + ATA_EH_PRERESET_TIMEOUT = 10000, + ATA_EH_FASTDRAIN_INTERVAL = 3000, + + ATA_EH_UA_TRIES = 5, + + /* probe speed down parameters, see ata_eh_schedule_probe() */ + ATA_EH_PROBE_TRIAL_INTERVAL = 60000, /* 1 min */ + ATA_EH_PROBE_TRIALS = 2, +}; + +/* The following table determines how we sequence resets. Each entry + * represents timeout for that try. The first try can be soft or + * hardreset. All others are hardreset if available. In most cases + * the first reset w/ 10sec timeout should succeed. Following entries + * are mostly for error handling, hotplug and those outlier devices that + * take an exceptionally long time to recover from reset. + */ +static const unsigned long ata_eh_reset_timeouts[] = { + 10000, /* most drives spin up by 10sec */ + 10000, /* > 99% working drives spin up before 20sec */ + 35000, /* give > 30 secs of idleness for outlier devices */ + 5000, /* and sweet one last chance */ + ULONG_MAX, /* > 1 min has elapsed, give up */ +}; + +static const unsigned long ata_eh_identify_timeouts[] = { + 5000, /* covers > 99% of successes and not too boring on failures */ + 10000, /* combined time till here is enough even for media access */ + 30000, /* for true idiots */ + ULONG_MAX, +}; + +static const unsigned long ata_eh_flush_timeouts[] = { + 15000, /* be generous with flush */ + 15000, /* ditto */ + 30000, /* and even more generous */ + ULONG_MAX, +}; + +static const unsigned long ata_eh_other_timeouts[] = { + 5000, /* same rationale as identify timeout */ + 10000, /* ditto */ + /* but no merciful 30sec for other commands, it just isn't worth it */ + ULONG_MAX, +}; + +struct ata_eh_cmd_timeout_ent { + const u8 *commands; + const unsigned long *timeouts; +}; + +/* The following table determines timeouts to use for EH internal + * commands. Each table entry is a command class and matches the + * commands the entry applies to and the timeout table to use. + * + * On the retry after a command timed out, the next timeout value from + * the table is used. If the table doesn't contain further entries, + * the last value is used. + * + * ehc->cmd_timeout_idx keeps track of which timeout to use per + * command class, so if SET_FEATURES times out on the first try, the + * next try will use the second timeout value only for that class. + */ +#define CMDS(cmds...) (const u8 []){ cmds, 0 } +static const struct ata_eh_cmd_timeout_ent +ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = { + { .commands = CMDS(ATA_CMD_ID_ATA, ATA_CMD_ID_ATAPI), + .timeouts = ata_eh_identify_timeouts, }, + { .commands = CMDS(ATA_CMD_READ_NATIVE_MAX, ATA_CMD_READ_NATIVE_MAX_EXT), + .timeouts = ata_eh_other_timeouts, }, + { .commands = CMDS(ATA_CMD_SET_MAX, ATA_CMD_SET_MAX_EXT), + .timeouts = ata_eh_other_timeouts, }, + { .commands = CMDS(ATA_CMD_SET_FEATURES), + .timeouts = ata_eh_other_timeouts, }, + { .commands = CMDS(ATA_CMD_INIT_DEV_PARAMS), + .timeouts = ata_eh_other_timeouts, }, + { .commands = CMDS(ATA_CMD_FLUSH, ATA_CMD_FLUSH_EXT), + .timeouts = ata_eh_flush_timeouts }, +}; +#undef CMDS + +static void __ata_port_freeze(struct ata_port *ap); +#ifdef CONFIG_PM +static void ata_eh_handle_port_suspend(struct ata_port *ap); +static void ata_eh_handle_port_resume(struct ata_port *ap); +#else /* CONFIG_PM */ +static void ata_eh_handle_port_suspend(struct ata_port *ap) +{ } + +static void ata_eh_handle_port_resume(struct ata_port *ap) +{ } +#endif /* CONFIG_PM */ + +static void __ata_ehi_pushv_desc(struct ata_eh_info *ehi, const char *fmt, + va_list args) +{ + ehi->desc_len += vscnprintf(ehi->desc + ehi->desc_len, + ATA_EH_DESC_LEN - ehi->desc_len, + fmt, args); +} + +/** + * __ata_ehi_push_desc - push error description without adding separator + * @ehi: target EHI + * @fmt: printf format string + * + * Format string according to @fmt and append it to @ehi->desc. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...) +{ + va_list args; + + va_start(args, fmt); + __ata_ehi_pushv_desc(ehi, fmt, args); + va_end(args); +} + +/** + * ata_ehi_push_desc - push error description with separator + * @ehi: target EHI + * @fmt: printf format string + * + * Format string according to @fmt and append it to @ehi->desc. + * If @ehi->desc is not empty, ", " is added in-between. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...) +{ + va_list args; + + if (ehi->desc_len) + __ata_ehi_push_desc(ehi, ", "); + + va_start(args, fmt); + __ata_ehi_pushv_desc(ehi, fmt, args); + va_end(args); +} + +/** + * ata_ehi_clear_desc - clean error description + * @ehi: target EHI + * + * Clear @ehi->desc. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_ehi_clear_desc(struct ata_eh_info *ehi) +{ + ehi->desc[0] = '\0'; + ehi->desc_len = 0; +} + +/** + * ata_port_desc - append port description + * @ap: target ATA port + * @fmt: printf format string + * + * Format string according to @fmt and append it to port + * description. If port description is not empty, " " is added + * in-between. This function is to be used while initializing + * ata_host. The description is printed on host registration. + * + * LOCKING: + * None. + */ +void ata_port_desc(struct ata_port *ap, const char *fmt, ...) +{ + va_list args; + + WARN_ON(!(ap->pflags & ATA_PFLAG_INITIALIZING)); + + if (ap->link.eh_info.desc_len) + __ata_ehi_push_desc(&ap->link.eh_info, " "); + + va_start(args, fmt); + __ata_ehi_pushv_desc(&ap->link.eh_info, fmt, args); + va_end(args); +} + +#ifdef CONFIG_PCI + +/** + * ata_port_pbar_desc - append PCI BAR description + * @ap: target ATA port + * @bar: target PCI BAR + * @offset: offset into PCI BAR + * @name: name of the area + * + * If @offset is negative, this function formats a string which + * contains the name, address, size and type of the BAR and + * appends it to the port description. If @offset is zero or + * positive, only name and offsetted address is appended. + * + * LOCKING: + * None. + */ +void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset, + const char *name) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + char *type = ""; + unsigned long long start, len; + + if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) + type = "m"; + else if (pci_resource_flags(pdev, bar) & IORESOURCE_IO) + type = "i"; + + start = (unsigned long long)pci_resource_start(pdev, bar); + len = (unsigned long long)pci_resource_len(pdev, bar); + + if (offset < 0) + ata_port_desc(ap, "%s %s%llu@0x%llx", name, type, len, start); + else + ata_port_desc(ap, "%s 0x%llx", name, + start + (unsigned long long)offset); +} + +#endif /* CONFIG_PCI */ + +static int ata_lookup_timeout_table(u8 cmd) +{ + int i; + + for (i = 0; i < ATA_EH_CMD_TIMEOUT_TABLE_SIZE; i++) { + const u8 *cur; + + for (cur = ata_eh_cmd_timeout_table[i].commands; *cur; cur++) + if (*cur == cmd) + return i; + } + + return -1; +} + +/** + * ata_internal_cmd_timeout - determine timeout for an internal command + * @dev: target device + * @cmd: internal command to be issued + * + * Determine timeout for internal command @cmd for @dev. + * + * LOCKING: + * EH context. + * + * RETURNS: + * Determined timeout. + */ +unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd) +{ + struct ata_eh_context *ehc = &dev->link->eh_context; + int ent = ata_lookup_timeout_table(cmd); + int idx; + + if (ent < 0) + return ATA_EH_CMD_DFL_TIMEOUT; + + idx = ehc->cmd_timeout_idx[dev->devno][ent]; + return ata_eh_cmd_timeout_table[ent].timeouts[idx]; +} + +/** + * ata_internal_cmd_timed_out - notification for internal command timeout + * @dev: target device + * @cmd: internal command which timed out + * + * Notify EH that internal command @cmd for @dev timed out. This + * function should be called only for commands whose timeouts are + * determined using ata_internal_cmd_timeout(). + * + * LOCKING: + * EH context. + */ +void ata_internal_cmd_timed_out(struct ata_device *dev, u8 cmd) +{ + struct ata_eh_context *ehc = &dev->link->eh_context; + int ent = ata_lookup_timeout_table(cmd); + int idx; + + if (ent < 0) + return; + + idx = ehc->cmd_timeout_idx[dev->devno][ent]; + if (ata_eh_cmd_timeout_table[ent].timeouts[idx + 1] != ULONG_MAX) + ehc->cmd_timeout_idx[dev->devno][ent]++; +} + +static void ata_ering_record(struct ata_ering *ering, unsigned int eflags, + unsigned int err_mask) +{ + struct ata_ering_entry *ent; + + WARN_ON(!err_mask); + + ering->cursor++; + ering->cursor %= ATA_ERING_SIZE; + + ent = &ering->ring[ering->cursor]; + ent->eflags = eflags; + ent->err_mask = err_mask; + ent->timestamp = get_jiffies_64(); +} + +static struct ata_ering_entry *ata_ering_top(struct ata_ering *ering) +{ + struct ata_ering_entry *ent = &ering->ring[ering->cursor]; + + if (ent->err_mask) + return ent; + return NULL; +} + +int ata_ering_map(struct ata_ering *ering, + int (*map_fn)(struct ata_ering_entry *, void *), + void *arg) +{ + int idx, rc = 0; + struct ata_ering_entry *ent; + + idx = ering->cursor; + do { + ent = &ering->ring[idx]; + if (!ent->err_mask) + break; + rc = map_fn(ent, arg); + if (rc) + break; + idx = (idx - 1 + ATA_ERING_SIZE) % ATA_ERING_SIZE; + } while (idx != ering->cursor); + + return rc; +} + +static int ata_ering_clear_cb(struct ata_ering_entry *ent, void *void_arg) +{ + ent->eflags |= ATA_EFLAG_OLD_ER; + return 0; +} + +static void ata_ering_clear(struct ata_ering *ering) +{ + ata_ering_map(ering, ata_ering_clear_cb, NULL); +} + +static unsigned int ata_eh_dev_action(struct ata_device *dev) +{ + struct ata_eh_context *ehc = &dev->link->eh_context; + + return ehc->i.action | ehc->i.dev_action[dev->devno]; +} + +static void ata_eh_clear_action(struct ata_link *link, struct ata_device *dev, + struct ata_eh_info *ehi, unsigned int action) +{ + struct ata_device *tdev; + + if (!dev) { + ehi->action &= ~action; + ata_for_each_dev(tdev, link, ALL) + ehi->dev_action[tdev->devno] &= ~action; + } else { + /* doesn't make sense for port-wide EH actions */ + WARN_ON(!(action & ATA_EH_PERDEV_MASK)); + + /* break ehi->action into ehi->dev_action */ + if (ehi->action & action) { + ata_for_each_dev(tdev, link, ALL) + ehi->dev_action[tdev->devno] |= + ehi->action & action; + ehi->action &= ~action; + } + + /* turn off the specified per-dev action */ + ehi->dev_action[dev->devno] &= ~action; + } +} + +/** + * ata_eh_acquire - acquire EH ownership + * @ap: ATA port to acquire EH ownership for + * + * Acquire EH ownership for @ap. This is the basic exclusion + * mechanism for ports sharing a host. Only one port hanging off + * the same host can claim the ownership of EH. + * + * LOCKING: + * EH context. + */ +void ata_eh_acquire(struct ata_port *ap) +{ + mutex_lock(&ap->host->eh_mutex); + WARN_ON_ONCE(ap->host->eh_owner); + ap->host->eh_owner = current; +} + +/** + * ata_eh_release - release EH ownership + * @ap: ATA port to release EH ownership for + * + * Release EH ownership for @ap if the caller. The caller must + * have acquired EH ownership using ata_eh_acquire() previously. + * + * LOCKING: + * EH context. + */ +void ata_eh_release(struct ata_port *ap) +{ + WARN_ON_ONCE(ap->host->eh_owner != current); + ap->host->eh_owner = NULL; + mutex_unlock(&ap->host->eh_mutex); +} + +/** + * ata_scsi_timed_out - SCSI layer time out callback + * @cmd: timed out SCSI command + * + * Handles SCSI layer timeout. We race with normal completion of + * the qc for @cmd. If the qc is already gone, we lose and let + * the scsi command finish (EH_HANDLED). Otherwise, the qc has + * timed out and EH should be invoked. Prevent ata_qc_complete() + * from finishing it by setting EH_SCHEDULED and return + * EH_NOT_HANDLED. + * + * TODO: kill this function once old EH is gone. + * + * LOCKING: + * Called from timer context + * + * RETURNS: + * EH_HANDLED or EH_NOT_HANDLED + */ +enum blk_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host = cmd->device->host; + struct ata_port *ap = ata_shost_to_port(host); + unsigned long flags; + struct ata_queued_cmd *qc; + enum blk_eh_timer_return ret; + + DPRINTK("ENTER\n"); + + if (ap->ops->error_handler) { + ret = BLK_EH_NOT_HANDLED; + goto out; + } + + ret = BLK_EH_HANDLED; + spin_lock_irqsave(ap->lock, flags); + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc) { + WARN_ON(qc->scsicmd != cmd); + qc->flags |= ATA_QCFLAG_EH_SCHEDULED; + qc->err_mask |= AC_ERR_TIMEOUT; + ret = BLK_EH_NOT_HANDLED; + } + spin_unlock_irqrestore(ap->lock, flags); + + out: + DPRINTK("EXIT, ret=%d\n", ret); + return ret; +} + +static void ata_eh_unload(struct ata_port *ap) +{ + struct ata_link *link; + struct ata_device *dev; + unsigned long flags; + + /* Restore SControl IPM and SPD for the next driver and + * disable attached devices. + */ + ata_for_each_link(link, ap, PMP_FIRST) { + sata_scr_write(link, SCR_CONTROL, link->saved_scontrol & 0xff0); + ata_for_each_dev(dev, link, ALL) + ata_dev_disable(dev); + } + + /* freeze and set UNLOADED */ + spin_lock_irqsave(ap->lock, flags); + + ata_port_freeze(ap); /* won't be thawed */ + ap->pflags &= ~ATA_PFLAG_EH_PENDING; /* clear pending from freeze */ + ap->pflags |= ATA_PFLAG_UNLOADED; + + spin_unlock_irqrestore(ap->lock, flags); +} + +/** + * ata_scsi_error - SCSI layer error handler callback + * @host: SCSI host on which error occurred + * + * Handles SCSI-layer-thrown error events. + * + * LOCKING: + * Inherited from SCSI layer (none, can sleep) + * + * RETURNS: + * Zero. + */ +void ata_scsi_error(struct Scsi_Host *host) +{ + struct ata_port *ap = ata_shost_to_port(host); + unsigned long flags; + LIST_HEAD(eh_work_q); + + DPRINTK("ENTER\n"); + + spin_lock_irqsave(host->host_lock, flags); + list_splice_init(&host->eh_cmd_q, &eh_work_q); + spin_unlock_irqrestore(host->host_lock, flags); + + ata_scsi_cmd_error_handler(host, ap, &eh_work_q); + + /* If we timed raced normal completion and there is nothing to + recover nr_timedout == 0 why exactly are we doing error recovery ? */ + ata_scsi_port_error_handler(host, ap); + + /* finish or retry handled scmd's and clean up */ + WARN_ON(host->host_failed || !list_empty(&eh_work_q)); + + DPRINTK("EXIT\n"); +} + +/** + * ata_scsi_cmd_error_handler - error callback for a list of commands + * @host: scsi host containing the port + * @ap: ATA port within the host + * @eh_work_q: list of commands to process + * + * process the given list of commands and return those finished to the + * ap->eh_done_q. This function is the first part of the libata error + * handler which processes a given list of failed commands. + */ +void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap, + struct list_head *eh_work_q) +{ + int i; + unsigned long flags; + + /* make sure sff pio task is not running */ + ata_sff_flush_pio_task(ap); + + /* synchronize with host lock and sort out timeouts */ + + /* For new EH, all qcs are finished in one of three ways - + * normal completion, error completion, and SCSI timeout. + * Both completions can race against SCSI timeout. When normal + * completion wins, the qc never reaches EH. When error + * completion wins, the qc has ATA_QCFLAG_FAILED set. + * + * When SCSI timeout wins, things are a bit more complex. + * Normal or error completion can occur after the timeout but + * before this point. In such cases, both types of + * completions are honored. A scmd is determined to have + * timed out iff its associated qc is active and not failed. + */ + if (ap->ops->error_handler) { + struct scsi_cmnd *scmd, *tmp; + int nr_timedout = 0; + + spin_lock_irqsave(ap->lock, flags); + + /* This must occur under the ap->lock as we don't want + a polled recovery to race the real interrupt handler + + The lost_interrupt handler checks for any completed but + non-notified command and completes much like an IRQ handler. + + We then fall into the error recovery code which will treat + this as if normal completion won the race */ + + if (ap->ops->lost_interrupt) + ap->ops->lost_interrupt(ap); + + list_for_each_entry_safe(scmd, tmp, eh_work_q, eh_entry) { + struct ata_queued_cmd *qc; + + for (i = 0; i < ATA_MAX_QUEUE; i++) { + qc = __ata_qc_from_tag(ap, i); + if (qc->flags & ATA_QCFLAG_ACTIVE && + qc->scsicmd == scmd) + break; + } + + if (i < ATA_MAX_QUEUE) { + /* the scmd has an associated qc */ + if (!(qc->flags & ATA_QCFLAG_FAILED)) { + /* which hasn't failed yet, timeout */ + qc->err_mask |= AC_ERR_TIMEOUT; + qc->flags |= ATA_QCFLAG_FAILED; + nr_timedout++; + } + } else { + /* Normal completion occurred after + * SCSI timeout but before this point. + * Successfully complete it. + */ + scmd->retries = scmd->allowed; + scsi_eh_finish_cmd(scmd, &ap->eh_done_q); + } + } + + /* If we have timed out qcs. They belong to EH from + * this point but the state of the controller is + * unknown. Freeze the port to make sure the IRQ + * handler doesn't diddle with those qcs. This must + * be done atomically w.r.t. setting QCFLAG_FAILED. + */ + if (nr_timedout) + __ata_port_freeze(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + /* initialize eh_tries */ + ap->eh_tries = ATA_EH_MAX_TRIES; + } else + spin_unlock_wait(ap->lock); + +} +EXPORT_SYMBOL(ata_scsi_cmd_error_handler); + +/** + * ata_scsi_port_error_handler - recover the port after the commands + * @host: SCSI host containing the port + * @ap: the ATA port + * + * Handle the recovery of the port @ap after all the commands + * have been recovered. + */ +void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap) +{ + unsigned long flags; + + /* invoke error handler */ + if (ap->ops->error_handler) { + struct ata_link *link; + + /* acquire EH ownership */ + ata_eh_acquire(ap); + repeat: + /* kill fast drain timer */ + del_timer_sync(&ap->fastdrain_timer); + + /* process port resume request */ + ata_eh_handle_port_resume(ap); + + /* fetch & clear EH info */ + spin_lock_irqsave(ap->lock, flags); + + ata_for_each_link(link, ap, HOST_FIRST) { + struct ata_eh_context *ehc = &link->eh_context; + struct ata_device *dev; + + memset(&link->eh_context, 0, sizeof(link->eh_context)); + link->eh_context.i = link->eh_info; + memset(&link->eh_info, 0, sizeof(link->eh_info)); + + ata_for_each_dev(dev, link, ENABLED) { + int devno = dev->devno; + + ehc->saved_xfer_mode[devno] = dev->xfer_mode; + if (ata_ncq_enabled(dev)) + ehc->saved_ncq_enabled |= 1 << devno; + } + } + + ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS; + ap->pflags &= ~ATA_PFLAG_EH_PENDING; + ap->excl_link = NULL; /* don't maintain exclusion over EH */ + + spin_unlock_irqrestore(ap->lock, flags); + + /* invoke EH, skip if unloading or suspended */ + if (!(ap->pflags & (ATA_PFLAG_UNLOADING | ATA_PFLAG_SUSPENDED))) + ap->ops->error_handler(ap); + else { + /* if unloading, commence suicide */ + if ((ap->pflags & ATA_PFLAG_UNLOADING) && + !(ap->pflags & ATA_PFLAG_UNLOADED)) + ata_eh_unload(ap); + ata_eh_finish(ap); + } + + /* process port suspend request */ + ata_eh_handle_port_suspend(ap); + + /* Exception might have happened after ->error_handler + * recovered the port but before this point. Repeat + * EH in such case. + */ + spin_lock_irqsave(ap->lock, flags); + + if (ap->pflags & ATA_PFLAG_EH_PENDING) { + if (--ap->eh_tries) { + spin_unlock_irqrestore(ap->lock, flags); + goto repeat; + } + ata_port_err(ap, + "EH pending after %d tries, giving up\n", + ATA_EH_MAX_TRIES); + ap->pflags &= ~ATA_PFLAG_EH_PENDING; + } + + /* this run is complete, make sure EH info is clear */ + ata_for_each_link(link, ap, HOST_FIRST) + memset(&link->eh_info, 0, sizeof(link->eh_info)); + + /* end eh (clear host_eh_scheduled) while holding + * ap->lock such that if exception occurs after this + * point but before EH completion, SCSI midlayer will + * re-initiate EH. + */ + ap->ops->end_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + ata_eh_release(ap); + } else { + WARN_ON(ata_qc_from_tag(ap, ap->link.active_tag) == NULL); + ap->ops->eng_timeout(ap); + } + + scsi_eh_flush_done_q(&ap->eh_done_q); + + /* clean up */ + spin_lock_irqsave(ap->lock, flags); + + if (ap->pflags & ATA_PFLAG_LOADING) + ap->pflags &= ~ATA_PFLAG_LOADING; + else if (ap->pflags & ATA_PFLAG_SCSI_HOTPLUG) + schedule_delayed_work(&ap->hotplug_task, 0); + + if (ap->pflags & ATA_PFLAG_RECOVERED) + ata_port_info(ap, "EH complete\n"); + + ap->pflags &= ~(ATA_PFLAG_SCSI_HOTPLUG | ATA_PFLAG_RECOVERED); + + /* tell wait_eh that we're done */ + ap->pflags &= ~ATA_PFLAG_EH_IN_PROGRESS; + wake_up_all(&ap->eh_wait_q); + + spin_unlock_irqrestore(ap->lock, flags); +} +EXPORT_SYMBOL_GPL(ata_scsi_port_error_handler); + +/** + * ata_port_wait_eh - Wait for the currently pending EH to complete + * @ap: Port to wait EH for + * + * Wait until the currently pending EH is complete. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_port_wait_eh(struct ata_port *ap) +{ + unsigned long flags; + DEFINE_WAIT(wait); + + retry: + spin_lock_irqsave(ap->lock, flags); + + while (ap->pflags & (ATA_PFLAG_EH_PENDING | ATA_PFLAG_EH_IN_PROGRESS)) { + prepare_to_wait(&ap->eh_wait_q, &wait, TASK_UNINTERRUPTIBLE); + spin_unlock_irqrestore(ap->lock, flags); + schedule(); + spin_lock_irqsave(ap->lock, flags); + } + finish_wait(&ap->eh_wait_q, &wait); + + spin_unlock_irqrestore(ap->lock, flags); + + /* make sure SCSI EH is complete */ + if (scsi_host_in_recovery(ap->scsi_host)) { + ata_msleep(ap, 10); + goto retry; + } +} +EXPORT_SYMBOL_GPL(ata_port_wait_eh); + +static int ata_eh_nr_in_flight(struct ata_port *ap) +{ + unsigned int tag; + int nr = 0; + + /* count only non-internal commands */ + for (tag = 0; tag < ATA_MAX_QUEUE - 1; tag++) + if (ata_qc_from_tag(ap, tag)) + nr++; + + return nr; +} + +void ata_eh_fastdrain_timerfn(unsigned long arg) +{ + struct ata_port *ap = (void *)arg; + unsigned long flags; + int cnt; + + spin_lock_irqsave(ap->lock, flags); + + cnt = ata_eh_nr_in_flight(ap); + + /* are we done? */ + if (!cnt) + goto out_unlock; + + if (cnt == ap->fastdrain_cnt) { + unsigned int tag; + + /* No progress during the last interval, tag all + * in-flight qcs as timed out and freeze the port. + */ + for (tag = 0; tag < ATA_MAX_QUEUE - 1; tag++) { + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); + if (qc) + qc->err_mask |= AC_ERR_TIMEOUT; + } + + ata_port_freeze(ap); + } else { + /* some qcs have finished, give it another chance */ + ap->fastdrain_cnt = cnt; + ap->fastdrain_timer.expires = + ata_deadline(jiffies, ATA_EH_FASTDRAIN_INTERVAL); + add_timer(&ap->fastdrain_timer); + } + + out_unlock: + spin_unlock_irqrestore(ap->lock, flags); +} + +/** + * ata_eh_set_pending - set ATA_PFLAG_EH_PENDING and activate fast drain + * @ap: target ATA port + * @fastdrain: activate fast drain + * + * Set ATA_PFLAG_EH_PENDING and activate fast drain if @fastdrain + * is non-zero and EH wasn't pending before. Fast drain ensures + * that EH kicks in in timely manner. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static void ata_eh_set_pending(struct ata_port *ap, int fastdrain) +{ + int cnt; + + /* already scheduled? */ + if (ap->pflags & ATA_PFLAG_EH_PENDING) + return; + + ap->pflags |= ATA_PFLAG_EH_PENDING; + + if (!fastdrain) + return; + + /* do we have in-flight qcs? */ + cnt = ata_eh_nr_in_flight(ap); + if (!cnt) + return; + + /* activate fast drain */ + ap->fastdrain_cnt = cnt; + ap->fastdrain_timer.expires = + ata_deadline(jiffies, ATA_EH_FASTDRAIN_INTERVAL); + add_timer(&ap->fastdrain_timer); +} + +/** + * ata_qc_schedule_eh - schedule qc for error handling + * @qc: command to schedule error handling for + * + * Schedule error handling for @qc. EH will kick in as soon as + * other commands are drained. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_qc_schedule_eh(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct request_queue *q = qc->scsicmd->device->request_queue; + unsigned long flags; + + WARN_ON(!ap->ops->error_handler); + + qc->flags |= ATA_QCFLAG_FAILED; + ata_eh_set_pending(ap, 1); + + /* The following will fail if timeout has already expired. + * ata_scsi_error() takes care of such scmds on EH entry. + * Note that ATA_QCFLAG_FAILED is unconditionally set after + * this function completes. + */ + spin_lock_irqsave(q->queue_lock, flags); + blk_abort_request(qc->scsicmd->request); + spin_unlock_irqrestore(q->queue_lock, flags); +} + +/** + * ata_std_sched_eh - non-libsas ata_ports issue eh with this common routine + * @ap: ATA port to schedule EH for + * + * LOCKING: inherited from ata_port_schedule_eh + * spin_lock_irqsave(host lock) + */ +void ata_std_sched_eh(struct ata_port *ap) +{ + WARN_ON(!ap->ops->error_handler); + + if (ap->pflags & ATA_PFLAG_INITIALIZING) + return; + + ata_eh_set_pending(ap, 1); + scsi_schedule_eh(ap->scsi_host); + + DPRINTK("port EH scheduled\n"); +} +EXPORT_SYMBOL_GPL(ata_std_sched_eh); + +/** + * ata_std_end_eh - non-libsas ata_ports complete eh with this common routine + * @ap: ATA port to end EH for + * + * In the libata object model there is a 1:1 mapping of ata_port to + * shost, so host fields can be directly manipulated under ap->lock, in + * the libsas case we need to hold a lock at the ha->level to coordinate + * these events. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_std_end_eh(struct ata_port *ap) +{ + struct Scsi_Host *host = ap->scsi_host; + + host->host_eh_scheduled = 0; +} +EXPORT_SYMBOL(ata_std_end_eh); + + +/** + * ata_port_schedule_eh - schedule error handling without a qc + * @ap: ATA port to schedule EH for + * + * Schedule error handling for @ap. EH will kick in as soon as + * all commands are drained. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_port_schedule_eh(struct ata_port *ap) +{ + /* see: ata_std_sched_eh, unless you know better */ + ap->ops->sched_eh(ap); +} + +static int ata_do_link_abort(struct ata_port *ap, struct ata_link *link) +{ + int tag, nr_aborted = 0; + + WARN_ON(!ap->ops->error_handler); + + /* we're gonna abort all commands, no need for fast drain */ + ata_eh_set_pending(ap, 0); + + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); + + if (qc && (!link || qc->dev->link == link)) { + qc->flags |= ATA_QCFLAG_FAILED; + ata_qc_complete(qc); + nr_aborted++; + } + } + + if (!nr_aborted) + ata_port_schedule_eh(ap); + + return nr_aborted; +} + +/** + * ata_link_abort - abort all qc's on the link + * @link: ATA link to abort qc's for + * + * Abort all active qc's active on @link and schedule EH. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Number of aborted qc's. + */ +int ata_link_abort(struct ata_link *link) +{ + return ata_do_link_abort(link->ap, link); +} + +/** + * ata_port_abort - abort all qc's on the port + * @ap: ATA port to abort qc's for + * + * Abort all active qc's of @ap and schedule EH. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Number of aborted qc's. + */ +int ata_port_abort(struct ata_port *ap) +{ + return ata_do_link_abort(ap, NULL); +} + +/** + * __ata_port_freeze - freeze port + * @ap: ATA port to freeze + * + * This function is called when HSM violation or some other + * condition disrupts normal operation of the port. Frozen port + * is not allowed to perform any operation until the port is + * thawed, which usually follows a successful reset. + * + * ap->ops->freeze() callback can be used for freezing the port + * hardware-wise (e.g. mask interrupt and stop DMA engine). If a + * port cannot be frozen hardware-wise, the interrupt handler + * must ack and clear interrupts unconditionally while the port + * is frozen. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static void __ata_port_freeze(struct ata_port *ap) +{ + WARN_ON(!ap->ops->error_handler); + + if (ap->ops->freeze) + ap->ops->freeze(ap); + + ap->pflags |= ATA_PFLAG_FROZEN; + + DPRINTK("ata%u port frozen\n", ap->print_id); +} + +/** + * ata_port_freeze - abort & freeze port + * @ap: ATA port to freeze + * + * Abort and freeze @ap. The freeze operation must be called + * first, because some hardware requires special operations + * before the taskfile registers are accessible. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Number of aborted commands. + */ +int ata_port_freeze(struct ata_port *ap) +{ + int nr_aborted; + + WARN_ON(!ap->ops->error_handler); + + __ata_port_freeze(ap); + nr_aborted = ata_port_abort(ap); + + return nr_aborted; +} + +/** + * sata_async_notification - SATA async notification handler + * @ap: ATA port where async notification is received + * + * Handler to be called when async notification via SDB FIS is + * received. This function schedules EH if necessary. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * 1 if EH is scheduled, 0 otherwise. + */ +int sata_async_notification(struct ata_port *ap) +{ + u32 sntf; + int rc; + + if (!(ap->flags & ATA_FLAG_AN)) + return 0; + + rc = sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf); + if (rc == 0) + sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf); + + if (!sata_pmp_attached(ap) || rc) { + /* PMP is not attached or SNTF is not available */ + if (!sata_pmp_attached(ap)) { + /* PMP is not attached. Check whether ATAPI + * AN is configured. If so, notify media + * change. + */ + struct ata_device *dev = ap->link.device; + + if ((dev->class == ATA_DEV_ATAPI) && + (dev->flags & ATA_DFLAG_AN)) + ata_scsi_media_change_notify(dev); + return 0; + } else { + /* PMP is attached but SNTF is not available. + * ATAPI async media change notification is + * not used. The PMP must be reporting PHY + * status change, schedule EH. + */ + ata_port_schedule_eh(ap); + return 1; + } + } else { + /* PMP is attached and SNTF is available */ + struct ata_link *link; + + /* check and notify ATAPI AN */ + ata_for_each_link(link, ap, EDGE) { + if (!(sntf & (1 << link->pmp))) + continue; + + if ((link->device->class == ATA_DEV_ATAPI) && + (link->device->flags & ATA_DFLAG_AN)) + ata_scsi_media_change_notify(link->device); + } + + /* If PMP is reporting that PHY status of some + * downstream ports has changed, schedule EH. + */ + if (sntf & (1 << SATA_PMP_CTRL_PORT)) { + ata_port_schedule_eh(ap); + return 1; + } + + return 0; + } +} + +/** + * ata_eh_freeze_port - EH helper to freeze port + * @ap: ATA port to freeze + * + * Freeze @ap. + * + * LOCKING: + * None. + */ +void ata_eh_freeze_port(struct ata_port *ap) +{ + unsigned long flags; + + if (!ap->ops->error_handler) + return; + + spin_lock_irqsave(ap->lock, flags); + __ata_port_freeze(ap); + spin_unlock_irqrestore(ap->lock, flags); +} + +/** + * ata_port_thaw_port - EH helper to thaw port + * @ap: ATA port to thaw + * + * Thaw frozen port @ap. + * + * LOCKING: + * None. + */ +void ata_eh_thaw_port(struct ata_port *ap) +{ + unsigned long flags; + + if (!ap->ops->error_handler) + return; + + spin_lock_irqsave(ap->lock, flags); + + ap->pflags &= ~ATA_PFLAG_FROZEN; + + if (ap->ops->thaw) + ap->ops->thaw(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + DPRINTK("ata%u port thawed\n", ap->print_id); +} + +static void ata_eh_scsidone(struct scsi_cmnd *scmd) +{ + /* nada */ +} + +static void __ata_eh_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scsi_cmnd *scmd = qc->scsicmd; + unsigned long flags; + + spin_lock_irqsave(ap->lock, flags); + qc->scsidone = ata_eh_scsidone; + __ata_qc_complete(qc); + WARN_ON(ata_tag_valid(qc->tag)); + spin_unlock_irqrestore(ap->lock, flags); + + scsi_eh_finish_cmd(scmd, &ap->eh_done_q); +} + +/** + * ata_eh_qc_complete - Complete an active ATA command from EH + * @qc: Command to complete + * + * Indicate to the mid and upper layers that an ATA command has + * completed. To be used from EH. + */ +void ata_eh_qc_complete(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + scmd->retries = scmd->allowed; + __ata_eh_qc_complete(qc); +} + +/** + * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH + * @qc: Command to retry + * + * Indicate to the mid and upper layers that an ATA command + * should be retried. To be used from EH. + * + * SCSI midlayer limits the number of retries to scmd->allowed. + * scmd->allowed is incremented for commands which get retried + * due to unrelated failures (qc->err_mask is zero). + */ +void ata_eh_qc_retry(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + if (!qc->err_mask) + scmd->allowed++; + __ata_eh_qc_complete(qc); +} + +/** + * ata_dev_disable - disable ATA device + * @dev: ATA device to disable + * + * Disable @dev. + * + * Locking: + * EH context. + */ +void ata_dev_disable(struct ata_device *dev) +{ + if (!ata_dev_enabled(dev)) + return; + + if (ata_msg_drv(dev->link->ap)) + ata_dev_warn(dev, "disabled\n"); + ata_acpi_on_disable(dev); + ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | ATA_DNXFER_QUIET); + dev->class++; + + /* From now till the next successful probe, ering is used to + * track probe failures. Clear accumulated device error info. + */ + ata_ering_clear(&dev->ering); +} + +/** + * ata_eh_detach_dev - detach ATA device + * @dev: ATA device to detach + * + * Detach @dev. + * + * LOCKING: + * None. + */ +void ata_eh_detach_dev(struct ata_device *dev) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; + unsigned long flags; + + ata_dev_disable(dev); + + spin_lock_irqsave(ap->lock, flags); + + dev->flags &= ~ATA_DFLAG_DETACH; + + if (ata_scsi_offline_dev(dev)) { + dev->flags |= ATA_DFLAG_DETACHED; + ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; + } + + /* clear per-dev EH info */ + ata_eh_clear_action(link, dev, &link->eh_info, ATA_EH_PERDEV_MASK); + ata_eh_clear_action(link, dev, &link->eh_context.i, ATA_EH_PERDEV_MASK); + ehc->saved_xfer_mode[dev->devno] = 0; + ehc->saved_ncq_enabled &= ~(1 << dev->devno); + + spin_unlock_irqrestore(ap->lock, flags); +} + +/** + * ata_eh_about_to_do - about to perform eh_action + * @link: target ATA link + * @dev: target ATA dev for per-dev action (can be NULL) + * @action: action about to be performed + * + * Called just before performing EH actions to clear related bits + * in @link->eh_info such that eh actions are not unnecessarily + * repeated. + * + * LOCKING: + * None. + */ +void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev, + unsigned int action) +{ + struct ata_port *ap = link->ap; + struct ata_eh_info *ehi = &link->eh_info; + struct ata_eh_context *ehc = &link->eh_context; + unsigned long flags; + + spin_lock_irqsave(ap->lock, flags); + + ata_eh_clear_action(link, dev, ehi, action); + + /* About to take EH action, set RECOVERED. Ignore actions on + * slave links as master will do them again. + */ + if (!(ehc->i.flags & ATA_EHI_QUIET) && link != ap->slave_link) + ap->pflags |= ATA_PFLAG_RECOVERED; + + spin_unlock_irqrestore(ap->lock, flags); +} + +/** + * ata_eh_done - EH action complete +* @ap: target ATA port + * @dev: target ATA dev for per-dev action (can be NULL) + * @action: action just completed + * + * Called right after performing EH actions to clear related bits + * in @link->eh_context. + * + * LOCKING: + * None. + */ +void ata_eh_done(struct ata_link *link, struct ata_device *dev, + unsigned int action) +{ + struct ata_eh_context *ehc = &link->eh_context; + + ata_eh_clear_action(link, dev, &ehc->i, action); +} + +/** + * ata_err_string - convert err_mask to descriptive string + * @err_mask: error mask to convert to string + * + * Convert @err_mask to descriptive string. Errors are + * prioritized according to severity and only the most severe + * error is reported. + * + * LOCKING: + * None. + * + * RETURNS: + * Descriptive string for @err_mask + */ +static const char *ata_err_string(unsigned int err_mask) +{ + if (err_mask & AC_ERR_HOST_BUS) + return "host bus error"; + if (err_mask & AC_ERR_ATA_BUS) + return "ATA bus error"; + if (err_mask & AC_ERR_TIMEOUT) + return "timeout"; + if (err_mask & AC_ERR_HSM) + return "HSM violation"; + if (err_mask & AC_ERR_SYSTEM) + return "internal error"; + if (err_mask & AC_ERR_MEDIA) + return "media error"; + if (err_mask & AC_ERR_INVALID) + return "invalid argument"; + if (err_mask & AC_ERR_DEV) + return "device error"; + return "unknown error"; +} + +/** + * ata_read_log_page - read a specific log page + * @dev: target device + * @log: log to read + * @page: page to read + * @buf: buffer to store read page + * @sectors: number of sectors to read + * + * Read log page using READ_LOG_EXT command. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, AC_ERR_* mask otherwise. + */ +unsigned int ata_read_log_page(struct ata_device *dev, u8 log, + u8 page, void *buf, unsigned int sectors) +{ + struct ata_taskfile tf; + unsigned int err_mask; + bool dma = false; + + DPRINTK("read log page - log 0x%x, page 0x%x\n", log, page); + +retry: + ata_tf_init(dev, &tf); + if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id) && + !(dev->horkage & ATA_HORKAGE_NO_NCQ_LOG)) { + tf.command = ATA_CMD_READ_LOG_DMA_EXT; + tf.protocol = ATA_PROT_DMA; + dma = true; + } else { + tf.command = ATA_CMD_READ_LOG_EXT; + tf.protocol = ATA_PROT_PIO; + dma = false; + } + tf.lbal = log; + tf.lbam = page; + tf.nsect = sectors; + tf.hob_nsect = sectors >> 8; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, + buf, sectors * ATA_SECT_SIZE, 0); + + if (err_mask && dma) { + dev->horkage |= ATA_HORKAGE_NO_NCQ_LOG; + ata_dev_warn(dev, "READ LOG DMA EXT failed, trying unqueued\n"); + goto retry; + } + + DPRINTK("EXIT, err_mask=%x\n", err_mask); + return err_mask; +} + +/** + * ata_eh_read_log_10h - Read log page 10h for NCQ error details + * @dev: Device to read log page 10h from + * @tag: Resulting tag of the failed command + * @tf: Resulting taskfile registers of the failed command + * + * Read log page 10h to obtain NCQ error details and clear error + * condition. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +static int ata_eh_read_log_10h(struct ata_device *dev, + int *tag, struct ata_taskfile *tf) +{ + u8 *buf = dev->link->ap->sector_buf; + unsigned int err_mask; + u8 csum; + int i; + + err_mask = ata_read_log_page(dev, ATA_LOG_SATA_NCQ, 0, buf, 1); + if (err_mask) + return -EIO; + + csum = 0; + for (i = 0; i < ATA_SECT_SIZE; i++) + csum += buf[i]; + if (csum) + ata_dev_warn(dev, "invalid checksum 0x%x on log page 10h\n", + csum); + + if (buf[0] & 0x80) + return -ENOENT; + + *tag = buf[0] & 0x1f; + + tf->command = buf[2]; + tf->feature = buf[3]; + tf->lbal = buf[4]; + tf->lbam = buf[5]; + tf->lbah = buf[6]; + tf->device = buf[7]; + tf->hob_lbal = buf[8]; + tf->hob_lbam = buf[9]; + tf->hob_lbah = buf[10]; + tf->nsect = buf[12]; + tf->hob_nsect = buf[13]; + if (ata_id_has_ncq_autosense(dev->id)) + tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16]; + + return 0; +} + +/** + * atapi_eh_tur - perform ATAPI TEST_UNIT_READY + * @dev: target ATAPI device + * @r_sense_key: out parameter for sense_key + * + * Perform ATAPI TEST_UNIT_READY. + * + * LOCKING: + * EH context (may sleep). + * + * RETURNS: + * 0 on success, AC_ERR_* mask on failure. + */ +unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key) +{ + u8 cdb[ATAPI_CDB_LEN] = { TEST_UNIT_READY, 0, 0, 0, 0, 0 }; + struct ata_taskfile tf; + unsigned int err_mask; + + ata_tf_init(dev, &tf); + + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.command = ATA_CMD_PACKET; + tf.protocol = ATAPI_PROT_NODATA; + + err_mask = ata_exec_internal(dev, &tf, cdb, DMA_NONE, NULL, 0, 0); + if (err_mask == AC_ERR_DEV) + *r_sense_key = tf.feature >> 4; + return err_mask; +} + +/** + * ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT + * @dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to + * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long) + * @dfl_sense_key: default sense key to use + * + * Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK + * SENSE. This function is EH helper. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * encoded sense data on success, 0 on failure or if sense data + * is not available. + */ +static u32 ata_eh_request_sense(struct ata_queued_cmd *qc, + struct scsi_cmnd *cmd) +{ + struct ata_device *dev = qc->dev; + struct ata_taskfile tf; + unsigned int err_mask; + + if (!cmd) + return 0; + + DPRINTK("ATA request sense\n"); + ata_dev_warn(dev, "request sense\n"); + if (!ata_id_sense_reporting_enabled(dev->id)) { + ata_dev_warn(qc->dev, "sense data reporting disabled\n"); + return 0; + } + ata_tf_init(dev, &tf); + + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; + tf.command = ATA_CMD_REQ_SENSE_DATA; + tf.protocol = ATA_PROT_NODATA; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + /* + * ACS-4 states: + * The device may set the SENSE DATA AVAILABLE bit to one in the + * STATUS field and clear the ERROR bit to zero in the STATUS field + * to indicate that the command returned completion without an error + * and the sense data described in table 306 is available. + * + * IOW the 'ATA_SENSE' bit might not be set even though valid + * sense data is available. + * So check for both. + */ + if ((tf.command & ATA_SENSE) || + tf.lbah != 0 || tf.lbam != 0 || tf.lbal != 0) { + ata_scsi_set_sense(cmd, tf.lbah, tf.lbam, tf.lbal); + qc->flags |= ATA_QCFLAG_SENSE_VALID; + ata_dev_warn(dev, "sense data %02x/%02x/%02x\n", + tf.lbah, tf.lbam, tf.lbal); + } else { + ata_dev_warn(dev, "request sense failed stat %02x emask %x\n", + tf.command, err_mask); + } + return err_mask; +} + +/** + * atapi_eh_request_sense - perform ATAPI REQUEST_SENSE + * @dev: device to perform REQUEST_SENSE to + * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long) + * @dfl_sense_key: default sense key to use + * + * Perform ATAPI REQUEST_SENSE after the device reported CHECK + * SENSE. This function is EH helper. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, AC_ERR_* mask on failure + */ +unsigned int atapi_eh_request_sense(struct ata_device *dev, + u8 *sense_buf, u8 dfl_sense_key) +{ + u8 cdb[ATAPI_CDB_LEN] = + { REQUEST_SENSE, 0, 0, 0, SCSI_SENSE_BUFFERSIZE, 0 }; + struct ata_port *ap = dev->link->ap; + struct ata_taskfile tf; + + DPRINTK("ATAPI request sense\n"); + + memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE); + + /* initialize sense_buf with the error register, + * for the case where they are -not- overwritten + */ + sense_buf[0] = 0x70; + sense_buf[2] = dfl_sense_key; + + /* some devices time out if garbage left in tf */ + ata_tf_init(dev, &tf); + + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.command = ATA_CMD_PACKET; + + /* is it pointless to prefer PIO for "safety reasons"? */ + if (ap->flags & ATA_FLAG_PIO_DMA) { + tf.protocol = ATAPI_PROT_DMA; + tf.feature |= ATAPI_PKT_DMA; + } else { + tf.protocol = ATAPI_PROT_PIO; + tf.lbam = SCSI_SENSE_BUFFERSIZE; + tf.lbah = 0; + } + + return ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE, + sense_buf, SCSI_SENSE_BUFFERSIZE, 0); +} + +/** + * ata_eh_analyze_serror - analyze SError for a failed port + * @link: ATA link to analyze SError for + * + * Analyze SError if available and further determine cause of + * failure. + * + * LOCKING: + * None. + */ +static void ata_eh_analyze_serror(struct ata_link *link) +{ + struct ata_eh_context *ehc = &link->eh_context; + u32 serror = ehc->i.serror; + unsigned int err_mask = 0, action = 0; + u32 hotplug_mask; + + if (serror & (SERR_PERSISTENT | SERR_DATA)) { + err_mask |= AC_ERR_ATA_BUS; + action |= ATA_EH_RESET; + } + if (serror & SERR_PROTOCOL) { + err_mask |= AC_ERR_HSM; + action |= ATA_EH_RESET; + } + if (serror & SERR_INTERNAL) { + err_mask |= AC_ERR_SYSTEM; + action |= ATA_EH_RESET; + } + + /* Determine whether a hotplug event has occurred. Both + * SError.N/X are considered hotplug events for enabled or + * host links. For disabled PMP links, only N bit is + * considered as X bit is left at 1 for link plugging. + */ + if (link->lpm_policy > ATA_LPM_MAX_POWER) + hotplug_mask = 0; /* hotplug doesn't work w/ LPM */ + else if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link)) + hotplug_mask = SERR_PHYRDY_CHG | SERR_DEV_XCHG; + else + hotplug_mask = SERR_PHYRDY_CHG; + + if (serror & hotplug_mask) + ata_ehi_hotplugged(&ehc->i); + + ehc->i.err_mask |= err_mask; + ehc->i.action |= action; +} + +/** + * ata_eh_analyze_ncq_error - analyze NCQ error + * @link: ATA link to analyze NCQ error for + * + * Read log page 10h, determine the offending qc and acquire + * error status TF. For NCQ device errors, all LLDDs have to do + * is setting AC_ERR_DEV in ehi->err_mask. This function takes + * care of the rest. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_eh_analyze_ncq_error(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; + struct ata_device *dev = link->device; + struct ata_queued_cmd *qc; + struct ata_taskfile tf; + int tag, rc; + + /* if frozen, we can't do much */ + if (ap->pflags & ATA_PFLAG_FROZEN) + return; + + /* is it NCQ device error? */ + if (!link->sactive || !(ehc->i.err_mask & AC_ERR_DEV)) + return; + + /* has LLDD analyzed already? */ + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED)) + continue; + + if (qc->err_mask) + return; + } + + /* okay, this error is ours */ + memset(&tf, 0, sizeof(tf)); + rc = ata_eh_read_log_10h(dev, &tag, &tf); + if (rc) { + ata_link_err(link, "failed to read log page 10h (errno=%d)\n", + rc); + return; + } + + if (!(link->sactive & (1 << tag))) { + ata_link_err(link, "log page 10h reported inactive tag %d\n", + tag); + return; + } + + /* we've got the perpetrator, condemn it */ + qc = __ata_qc_from_tag(ap, tag); + memcpy(&qc->result_tf, &tf, sizeof(tf)); + qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48; + qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ; + if (qc->result_tf.auxiliary) { + char sense_key, asc, ascq; + + sense_key = (qc->result_tf.auxiliary >> 16) & 0xff; + asc = (qc->result_tf.auxiliary >> 8) & 0xff; + ascq = qc->result_tf.auxiliary & 0xff; + ata_dev_dbg(dev, "NCQ Autosense %02x/%02x/%02x\n", + sense_key, asc, ascq); + ata_scsi_set_sense(qc->scsicmd, sense_key, asc, ascq); + ata_scsi_set_sense_information(qc->scsicmd, &qc->result_tf); + qc->flags |= ATA_QCFLAG_SENSE_VALID; + } + + ehc->i.err_mask &= ~AC_ERR_DEV; +} + +/** + * ata_eh_analyze_tf - analyze taskfile of a failed qc + * @qc: qc to analyze + * @tf: Taskfile registers to analyze + * + * Analyze taskfile of @qc and further determine cause of + * failure. This function also requests ATAPI sense data if + * available. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * Determined recovery action + */ +static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, + const struct ata_taskfile *tf) +{ + unsigned int tmp, action = 0; + u8 stat = tf->command, err = tf->feature; + + if ((stat & (ATA_BUSY | ATA_DRQ | ATA_DRDY)) != ATA_DRDY) { + qc->err_mask |= AC_ERR_HSM; + return ATA_EH_RESET; + } + + /* + * Sense data reporting does not work if the + * device fault bit is set. + */ + if ((stat & ATA_SENSE) && !(stat & ATA_DF) && + !(qc->flags & ATA_QCFLAG_SENSE_VALID)) { + if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) { + tmp = ata_eh_request_sense(qc, qc->scsicmd); + if (tmp) + qc->err_mask |= tmp; + else + ata_scsi_set_sense_information(qc->scsicmd, tf); + } else { + ata_dev_warn(qc->dev, "sense data available but port frozen\n"); + } + } + + /* Set by NCQ autosense or request sense above */ + if (qc->flags & ATA_QCFLAG_SENSE_VALID) + return 0; + + if (stat & (ATA_ERR | ATA_DF)) + qc->err_mask |= AC_ERR_DEV; + else + return 0; + + switch (qc->dev->class) { + case ATA_DEV_ATA: + case ATA_DEV_ZAC: + if (err & ATA_ICRC) + qc->err_mask |= AC_ERR_ATA_BUS; + if (err & (ATA_UNC | ATA_AMNF)) + qc->err_mask |= AC_ERR_MEDIA; + if (err & ATA_IDNF) + qc->err_mask |= AC_ERR_INVALID; + break; + + case ATA_DEV_ATAPI: + if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) { + tmp = atapi_eh_request_sense(qc->dev, + qc->scsicmd->sense_buffer, + qc->result_tf.feature >> 4); + if (!tmp) { + /* ATA_QCFLAG_SENSE_VALID is used to + * tell atapi_qc_complete() that sense + * data is already valid. + * + * TODO: interpret sense data and set + * appropriate err_mask. + */ + qc->flags |= ATA_QCFLAG_SENSE_VALID; + } else + qc->err_mask |= tmp; + } + } + + if (qc->err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT | AC_ERR_ATA_BUS)) + action |= ATA_EH_RESET; + + return action; +} + +static int ata_eh_categorize_error(unsigned int eflags, unsigned int err_mask, + int *xfer_ok) +{ + int base = 0; + + if (!(eflags & ATA_EFLAG_DUBIOUS_XFER)) + *xfer_ok = 1; + + if (!*xfer_ok) + base = ATA_ECAT_DUBIOUS_NONE; + + if (err_mask & AC_ERR_ATA_BUS) + return base + ATA_ECAT_ATA_BUS; + + if (err_mask & AC_ERR_TIMEOUT) + return base + ATA_ECAT_TOUT_HSM; + + if (eflags & ATA_EFLAG_IS_IO) { + if (err_mask & AC_ERR_HSM) + return base + ATA_ECAT_TOUT_HSM; + if ((err_mask & + (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV) + return base + ATA_ECAT_UNK_DEV; + } + + return 0; +} + +struct speed_down_verdict_arg { + u64 since; + int xfer_ok; + int nr_errors[ATA_ECAT_NR]; +}; + +static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg) +{ + struct speed_down_verdict_arg *arg = void_arg; + int cat; + + if ((ent->eflags & ATA_EFLAG_OLD_ER) || (ent->timestamp < arg->since)) + return -1; + + cat = ata_eh_categorize_error(ent->eflags, ent->err_mask, + &arg->xfer_ok); + arg->nr_errors[cat]++; + + return 0; +} + +/** + * ata_eh_speed_down_verdict - Determine speed down verdict + * @dev: Device of interest + * + * This function examines error ring of @dev and determines + * whether NCQ needs to be turned off, transfer speed should be + * stepped down, or falling back to PIO is necessary. + * + * ECAT_ATA_BUS : ATA_BUS error for any command + * + * ECAT_TOUT_HSM : TIMEOUT for any command or HSM violation for + * IO commands + * + * ECAT_UNK_DEV : Unknown DEV error for IO commands + * + * ECAT_DUBIOUS_* : Identical to above three but occurred while + * data transfer hasn't been verified. + * + * Verdicts are + * + * NCQ_OFF : Turn off NCQ. + * + * SPEED_DOWN : Speed down transfer speed but don't fall back + * to PIO. + * + * FALLBACK_TO_PIO : Fall back to PIO. + * + * Even if multiple verdicts are returned, only one action is + * taken per error. An action triggered by non-DUBIOUS errors + * clears ering, while one triggered by DUBIOUS_* errors doesn't. + * This is to expedite speed down decisions right after device is + * initially configured. + * + * The followings are speed down rules. #1 and #2 deal with + * DUBIOUS errors. + * + * 1. If more than one DUBIOUS_ATA_BUS or DUBIOUS_TOUT_HSM errors + * occurred during last 5 mins, SPEED_DOWN and FALLBACK_TO_PIO. + * + * 2. If more than one DUBIOUS_TOUT_HSM or DUBIOUS_UNK_DEV errors + * occurred during last 5 mins, NCQ_OFF. + * + * 3. If more than 8 ATA_BUS, TOUT_HSM or UNK_DEV errors + * occurred during last 5 mins, FALLBACK_TO_PIO + * + * 4. If more than 3 TOUT_HSM or UNK_DEV errors occurred + * during last 10 mins, NCQ_OFF. + * + * 5. If more than 3 ATA_BUS or TOUT_HSM errors, or more than 6 + * UNK_DEV errors occurred during last 10 mins, SPEED_DOWN. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * OR of ATA_EH_SPDN_* flags. + */ +static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev) +{ + const u64 j5mins = 5LLU * 60 * HZ, j10mins = 10LLU * 60 * HZ; + u64 j64 = get_jiffies_64(); + struct speed_down_verdict_arg arg; + unsigned int verdict = 0; + + /* scan past 5 mins of error history */ + memset(&arg, 0, sizeof(arg)); + arg.since = j64 - min(j64, j5mins); + ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg); + + if (arg.nr_errors[ATA_ECAT_DUBIOUS_ATA_BUS] + + arg.nr_errors[ATA_ECAT_DUBIOUS_TOUT_HSM] > 1) + verdict |= ATA_EH_SPDN_SPEED_DOWN | + ATA_EH_SPDN_FALLBACK_TO_PIO | ATA_EH_SPDN_KEEP_ERRORS; + + if (arg.nr_errors[ATA_ECAT_DUBIOUS_TOUT_HSM] + + arg.nr_errors[ATA_ECAT_DUBIOUS_UNK_DEV] > 1) + verdict |= ATA_EH_SPDN_NCQ_OFF | ATA_EH_SPDN_KEEP_ERRORS; + + if (arg.nr_errors[ATA_ECAT_ATA_BUS] + + arg.nr_errors[ATA_ECAT_TOUT_HSM] + + arg.nr_errors[ATA_ECAT_UNK_DEV] > 6) + verdict |= ATA_EH_SPDN_FALLBACK_TO_PIO; + + /* scan past 10 mins of error history */ + memset(&arg, 0, sizeof(arg)); + arg.since = j64 - min(j64, j10mins); + ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg); + + if (arg.nr_errors[ATA_ECAT_TOUT_HSM] + + arg.nr_errors[ATA_ECAT_UNK_DEV] > 3) + verdict |= ATA_EH_SPDN_NCQ_OFF; + + if (arg.nr_errors[ATA_ECAT_ATA_BUS] + + arg.nr_errors[ATA_ECAT_TOUT_HSM] > 3 || + arg.nr_errors[ATA_ECAT_UNK_DEV] > 6) + verdict |= ATA_EH_SPDN_SPEED_DOWN; + + return verdict; +} + +/** + * ata_eh_speed_down - record error and speed down if necessary + * @dev: Failed device + * @eflags: mask of ATA_EFLAG_* flags + * @err_mask: err_mask of the error + * + * Record error and examine error history to determine whether + * adjusting transmission speed is necessary. It also sets + * transmission limits appropriately if such adjustment is + * necessary. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * Determined recovery action. + */ +static unsigned int ata_eh_speed_down(struct ata_device *dev, + unsigned int eflags, unsigned int err_mask) +{ + struct ata_link *link = ata_dev_phys_link(dev); + int xfer_ok = 0; + unsigned int verdict; + unsigned int action = 0; + + /* don't bother if Cat-0 error */ + if (ata_eh_categorize_error(eflags, err_mask, &xfer_ok) == 0) + return 0; + + /* record error and determine whether speed down is necessary */ + ata_ering_record(&dev->ering, eflags, err_mask); + verdict = ata_eh_speed_down_verdict(dev); + + /* turn off NCQ? */ + if ((verdict & ATA_EH_SPDN_NCQ_OFF) && + (dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ | + ATA_DFLAG_NCQ_OFF)) == ATA_DFLAG_NCQ) { + dev->flags |= ATA_DFLAG_NCQ_OFF; + ata_dev_warn(dev, "NCQ disabled due to excessive errors\n"); + goto done; + } + + /* speed down? */ + if (verdict & ATA_EH_SPDN_SPEED_DOWN) { + /* speed down SATA link speed if possible */ + if (sata_down_spd_limit(link, 0) == 0) { + action |= ATA_EH_RESET; + goto done; + } + + /* lower transfer mode */ + if (dev->spdn_cnt < 2) { + static const int dma_dnxfer_sel[] = + { ATA_DNXFER_DMA, ATA_DNXFER_40C }; + static const int pio_dnxfer_sel[] = + { ATA_DNXFER_PIO, ATA_DNXFER_FORCE_PIO0 }; + int sel; + + if (dev->xfer_shift != ATA_SHIFT_PIO) + sel = dma_dnxfer_sel[dev->spdn_cnt]; + else + sel = pio_dnxfer_sel[dev->spdn_cnt]; + + dev->spdn_cnt++; + + if (ata_down_xfermask_limit(dev, sel) == 0) { + action |= ATA_EH_RESET; + goto done; + } + } + } + + /* Fall back to PIO? Slowing down to PIO is meaningless for + * SATA ATA devices. Consider it only for PATA and SATAPI. + */ + if ((verdict & ATA_EH_SPDN_FALLBACK_TO_PIO) && (dev->spdn_cnt >= 2) && + (link->ap->cbl != ATA_CBL_SATA || dev->class == ATA_DEV_ATAPI) && + (dev->xfer_shift != ATA_SHIFT_PIO)) { + if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) { + dev->spdn_cnt = 0; + action |= ATA_EH_RESET; + goto done; + } + } + + return 0; + done: + /* device has been slowed down, blow error history */ + if (!(verdict & ATA_EH_SPDN_KEEP_ERRORS)) + ata_ering_clear(&dev->ering); + return action; +} + +/** + * ata_eh_worth_retry - analyze error and decide whether to retry + * @qc: qc to possibly retry + * + * Look at the cause of the error and decide if a retry + * might be useful or not. We don't want to retry media errors + * because the drive itself has probably already taken 10-30 seconds + * doing its own internal retries before reporting the failure. + */ +static inline int ata_eh_worth_retry(struct ata_queued_cmd *qc) +{ + if (qc->err_mask & AC_ERR_MEDIA) + return 0; /* don't retry media errors */ + if (qc->flags & ATA_QCFLAG_IO) + return 1; /* otherwise retry anything from fs stack */ + if (qc->err_mask & AC_ERR_INVALID) + return 0; /* don't retry these */ + return qc->err_mask != AC_ERR_DEV; /* retry if not dev error */ +} + +/** + * ata_eh_link_autopsy - analyze error and determine recovery action + * @link: host link to perform autopsy on + * + * Analyze why @link failed and determine which recovery actions + * are needed. This function also sets more detailed AC_ERR_* + * values and fills sense data for ATAPI CHECK SENSE. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_link_autopsy(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; + struct ata_device *dev; + unsigned int all_err_mask = 0, eflags = 0; + int tag; + u32 serror; + int rc; + + DPRINTK("ENTER\n"); + + if (ehc->i.flags & ATA_EHI_NO_AUTOPSY) + return; + + /* obtain and analyze SError */ + rc = sata_scr_read(link, SCR_ERROR, &serror); + if (rc == 0) { + ehc->i.serror |= serror; + ata_eh_analyze_serror(link); + } else if (rc != -EOPNOTSUPP) { + /* SError read failed, force reset and probing */ + ehc->i.probe_mask |= ATA_ALL_DEVICES; + ehc->i.action |= ATA_EH_RESET; + ehc->i.err_mask |= AC_ERR_OTHER; + } + + /* analyze NCQ failure */ + ata_eh_analyze_ncq_error(link); + + /* any real error trumps AC_ERR_OTHER */ + if (ehc->i.err_mask & ~AC_ERR_OTHER) + ehc->i.err_mask &= ~AC_ERR_OTHER; + + all_err_mask |= ehc->i.err_mask; + + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED) || + ata_dev_phys_link(qc->dev) != link) + continue; + + /* inherit upper level err_mask */ + qc->err_mask |= ehc->i.err_mask; + + /* analyze TF */ + ehc->i.action |= ata_eh_analyze_tf(qc, &qc->result_tf); + + /* DEV errors are probably spurious in case of ATA_BUS error */ + if (qc->err_mask & AC_ERR_ATA_BUS) + qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_MEDIA | + AC_ERR_INVALID); + + /* any real error trumps unknown error */ + if (qc->err_mask & ~AC_ERR_OTHER) + qc->err_mask &= ~AC_ERR_OTHER; + + /* SENSE_VALID trumps dev/unknown error and revalidation */ + if (qc->flags & ATA_QCFLAG_SENSE_VALID) + qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER); + + /* determine whether the command is worth retrying */ + if (ata_eh_worth_retry(qc)) + qc->flags |= ATA_QCFLAG_RETRY; + + /* accumulate error info */ + ehc->i.dev = qc->dev; + all_err_mask |= qc->err_mask; + if (qc->flags & ATA_QCFLAG_IO) + eflags |= ATA_EFLAG_IS_IO; + trace_ata_eh_link_autopsy_qc(qc); + } + + /* enforce default EH actions */ + if (ap->pflags & ATA_PFLAG_FROZEN || + all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT)) + ehc->i.action |= ATA_EH_RESET; + else if (((eflags & ATA_EFLAG_IS_IO) && all_err_mask) || + (!(eflags & ATA_EFLAG_IS_IO) && (all_err_mask & ~AC_ERR_DEV))) + ehc->i.action |= ATA_EH_REVALIDATE; + + /* If we have offending qcs and the associated failed device, + * perform per-dev EH action only on the offending device. + */ + if (ehc->i.dev) { + ehc->i.dev_action[ehc->i.dev->devno] |= + ehc->i.action & ATA_EH_PERDEV_MASK; + ehc->i.action &= ~ATA_EH_PERDEV_MASK; + } + + /* propagate timeout to host link */ + if ((all_err_mask & AC_ERR_TIMEOUT) && !ata_is_host_link(link)) + ap->link.eh_context.i.err_mask |= AC_ERR_TIMEOUT; + + /* record error and consider speeding down */ + dev = ehc->i.dev; + if (!dev && ((ata_link_max_devices(link) == 1 && + ata_dev_enabled(link->device)))) + dev = link->device; + + if (dev) { + if (dev->flags & ATA_DFLAG_DUBIOUS_XFER) + eflags |= ATA_EFLAG_DUBIOUS_XFER; + ehc->i.action |= ata_eh_speed_down(dev, eflags, all_err_mask); + } + trace_ata_eh_link_autopsy(dev, ehc->i.action, all_err_mask); + DPRINTK("EXIT\n"); +} + +/** + * ata_eh_autopsy - analyze error and determine recovery action + * @ap: host port to perform autopsy on + * + * Analyze all links of @ap and determine why they failed and + * which recovery actions are needed. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_eh_autopsy(struct ata_port *ap) +{ + struct ata_link *link; + + ata_for_each_link(link, ap, EDGE) + ata_eh_link_autopsy(link); + + /* Handle the frigging slave link. Autopsy is done similarly + * but actions and flags are transferred over to the master + * link and handled from there. + */ + if (ap->slave_link) { + struct ata_eh_context *mehc = &ap->link.eh_context; + struct ata_eh_context *sehc = &ap->slave_link->eh_context; + + /* transfer control flags from master to slave */ + sehc->i.flags |= mehc->i.flags & ATA_EHI_TO_SLAVE_MASK; + + /* perform autopsy on the slave link */ + ata_eh_link_autopsy(ap->slave_link); + + /* transfer actions from slave to master and clear slave */ + ata_eh_about_to_do(ap->slave_link, NULL, ATA_EH_ALL_ACTIONS); + mehc->i.action |= sehc->i.action; + mehc->i.dev_action[1] |= sehc->i.dev_action[1]; + mehc->i.flags |= sehc->i.flags; + ata_eh_done(ap->slave_link, NULL, ATA_EH_ALL_ACTIONS); + } + + /* Autopsy of fanout ports can affect host link autopsy. + * Perform host link autopsy last. + */ + if (sata_pmp_attached(ap)) + ata_eh_link_autopsy(&ap->link); +} + +/** + * ata_get_cmd_descript - get description for ATA command + * @command: ATA command code to get description for + * + * Return a textual description of the given command, or NULL if the + * command is not known. + * + * LOCKING: + * None + */ +const char *ata_get_cmd_descript(u8 command) +{ +#ifdef CONFIG_ATA_VERBOSE_ERROR + static const struct + { + u8 command; + const char *text; + } cmd_descr[] = { + { ATA_CMD_DEV_RESET, "DEVICE RESET" }, + { ATA_CMD_CHK_POWER, "CHECK POWER MODE" }, + { ATA_CMD_STANDBY, "STANDBY" }, + { ATA_CMD_IDLE, "IDLE" }, + { ATA_CMD_EDD, "EXECUTE DEVICE DIAGNOSTIC" }, + { ATA_CMD_DOWNLOAD_MICRO, "DOWNLOAD MICROCODE" }, + { ATA_CMD_DOWNLOAD_MICRO_DMA, "DOWNLOAD MICROCODE DMA" }, + { ATA_CMD_NOP, "NOP" }, + { ATA_CMD_FLUSH, "FLUSH CACHE" }, + { ATA_CMD_FLUSH_EXT, "FLUSH CACHE EXT" }, + { ATA_CMD_ID_ATA, "IDENTIFY DEVICE" }, + { ATA_CMD_ID_ATAPI, "IDENTIFY PACKET DEVICE" }, + { ATA_CMD_SERVICE, "SERVICE" }, + { ATA_CMD_READ, "READ DMA" }, + { ATA_CMD_READ_EXT, "READ DMA EXT" }, + { ATA_CMD_READ_QUEUED, "READ DMA QUEUED" }, + { ATA_CMD_READ_STREAM_EXT, "READ STREAM EXT" }, + { ATA_CMD_READ_STREAM_DMA_EXT, "READ STREAM DMA EXT" }, + { ATA_CMD_WRITE, "WRITE DMA" }, + { ATA_CMD_WRITE_EXT, "WRITE DMA EXT" }, + { ATA_CMD_WRITE_QUEUED, "WRITE DMA QUEUED EXT" }, + { ATA_CMD_WRITE_STREAM_EXT, "WRITE STREAM EXT" }, + { ATA_CMD_WRITE_STREAM_DMA_EXT, "WRITE STREAM DMA EXT" }, + { ATA_CMD_WRITE_FUA_EXT, "WRITE DMA FUA EXT" }, + { ATA_CMD_WRITE_QUEUED_FUA_EXT, "WRITE DMA QUEUED FUA EXT" }, + { ATA_CMD_FPDMA_READ, "READ FPDMA QUEUED" }, + { ATA_CMD_FPDMA_WRITE, "WRITE FPDMA QUEUED" }, + { ATA_CMD_FPDMA_SEND, "SEND FPDMA QUEUED" }, + { ATA_CMD_FPDMA_RECV, "RECEIVE FPDMA QUEUED" }, + { ATA_CMD_PIO_READ, "READ SECTOR(S)" }, + { ATA_CMD_PIO_READ_EXT, "READ SECTOR(S) EXT" }, + { ATA_CMD_PIO_WRITE, "WRITE SECTOR(S)" }, + { ATA_CMD_PIO_WRITE_EXT, "WRITE SECTOR(S) EXT" }, + { ATA_CMD_READ_MULTI, "READ MULTIPLE" }, + { ATA_CMD_READ_MULTI_EXT, "READ MULTIPLE EXT" }, + { ATA_CMD_WRITE_MULTI, "WRITE MULTIPLE" }, + { ATA_CMD_WRITE_MULTI_EXT, "WRITE MULTIPLE EXT" }, + { ATA_CMD_WRITE_MULTI_FUA_EXT, "WRITE MULTIPLE FUA EXT" }, + { ATA_CMD_SET_FEATURES, "SET FEATURES" }, + { ATA_CMD_SET_MULTI, "SET MULTIPLE MODE" }, + { ATA_CMD_VERIFY, "READ VERIFY SECTOR(S)" }, + { ATA_CMD_VERIFY_EXT, "READ VERIFY SECTOR(S) EXT" }, + { ATA_CMD_WRITE_UNCORR_EXT, "WRITE UNCORRECTABLE EXT" }, + { ATA_CMD_STANDBYNOW1, "STANDBY IMMEDIATE" }, + { ATA_CMD_IDLEIMMEDIATE, "IDLE IMMEDIATE" }, + { ATA_CMD_SLEEP, "SLEEP" }, + { ATA_CMD_INIT_DEV_PARAMS, "INITIALIZE DEVICE PARAMETERS" }, + { ATA_CMD_READ_NATIVE_MAX, "READ NATIVE MAX ADDRESS" }, + { ATA_CMD_READ_NATIVE_MAX_EXT, "READ NATIVE MAX ADDRESS EXT" }, + { ATA_CMD_SET_MAX, "SET MAX ADDRESS" }, + { ATA_CMD_SET_MAX_EXT, "SET MAX ADDRESS EXT" }, + { ATA_CMD_READ_LOG_EXT, "READ LOG EXT" }, + { ATA_CMD_WRITE_LOG_EXT, "WRITE LOG EXT" }, + { ATA_CMD_READ_LOG_DMA_EXT, "READ LOG DMA EXT" }, + { ATA_CMD_WRITE_LOG_DMA_EXT, "WRITE LOG DMA EXT" }, + { ATA_CMD_TRUSTED_NONDATA, "TRUSTED NON-DATA" }, + { ATA_CMD_TRUSTED_RCV, "TRUSTED RECEIVE" }, + { ATA_CMD_TRUSTED_RCV_DMA, "TRUSTED RECEIVE DMA" }, + { ATA_CMD_TRUSTED_SND, "TRUSTED SEND" }, + { ATA_CMD_TRUSTED_SND_DMA, "TRUSTED SEND DMA" }, + { ATA_CMD_PMP_READ, "READ BUFFER" }, + { ATA_CMD_PMP_READ_DMA, "READ BUFFER DMA" }, + { ATA_CMD_PMP_WRITE, "WRITE BUFFER" }, + { ATA_CMD_PMP_WRITE_DMA, "WRITE BUFFER DMA" }, + { ATA_CMD_CONF_OVERLAY, "DEVICE CONFIGURATION OVERLAY" }, + { ATA_CMD_SEC_SET_PASS, "SECURITY SET PASSWORD" }, + { ATA_CMD_SEC_UNLOCK, "SECURITY UNLOCK" }, + { ATA_CMD_SEC_ERASE_PREP, "SECURITY ERASE PREPARE" }, + { ATA_CMD_SEC_ERASE_UNIT, "SECURITY ERASE UNIT" }, + { ATA_CMD_SEC_FREEZE_LOCK, "SECURITY FREEZE LOCK" }, + { ATA_CMD_SEC_DISABLE_PASS, "SECURITY DISABLE PASSWORD" }, + { ATA_CMD_CONFIG_STREAM, "CONFIGURE STREAM" }, + { ATA_CMD_SMART, "SMART" }, + { ATA_CMD_MEDIA_LOCK, "DOOR LOCK" }, + { ATA_CMD_MEDIA_UNLOCK, "DOOR UNLOCK" }, + { ATA_CMD_DSM, "DATA SET MANAGEMENT" }, + { ATA_CMD_CHK_MED_CRD_TYP, "CHECK MEDIA CARD TYPE" }, + { ATA_CMD_CFA_REQ_EXT_ERR, "CFA REQUEST EXTENDED ERROR" }, + { ATA_CMD_CFA_WRITE_NE, "CFA WRITE SECTORS WITHOUT ERASE" }, + { ATA_CMD_CFA_TRANS_SECT, "CFA TRANSLATE SECTOR" }, + { ATA_CMD_CFA_ERASE, "CFA ERASE SECTORS" }, + { ATA_CMD_CFA_WRITE_MULT_NE, "CFA WRITE MULTIPLE WITHOUT ERASE" }, + { ATA_CMD_REQ_SENSE_DATA, "REQUEST SENSE DATA EXT" }, + { ATA_CMD_SANITIZE_DEVICE, "SANITIZE DEVICE" }, + { ATA_CMD_READ_LONG, "READ LONG (with retries)" }, + { ATA_CMD_READ_LONG_ONCE, "READ LONG (without retries)" }, + { ATA_CMD_WRITE_LONG, "WRITE LONG (with retries)" }, + { ATA_CMD_WRITE_LONG_ONCE, "WRITE LONG (without retries)" }, + { ATA_CMD_RESTORE, "RECALIBRATE" }, + { 0, NULL } /* terminate list */ + }; + + unsigned int i; + for (i = 0; cmd_descr[i].text; i++) + if (cmd_descr[i].command == command) + return cmd_descr[i].text; +#endif + + return NULL; +} +EXPORT_SYMBOL_GPL(ata_get_cmd_descript); + +/** + * ata_eh_link_report - report error handling to user + * @link: ATA link EH is going on + * + * Report EH to user. + * + * LOCKING: + * None. + */ +static void ata_eh_link_report(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; + const char *frozen, *desc; + char tries_buf[6] = ""; + int tag, nr_failed = 0; + + if (ehc->i.flags & ATA_EHI_QUIET) + return; + + desc = NULL; + if (ehc->i.desc[0] != '\0') + desc = ehc->i.desc; + + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED) || + ata_dev_phys_link(qc->dev) != link || + ((qc->flags & ATA_QCFLAG_QUIET) && + qc->err_mask == AC_ERR_DEV)) + continue; + if (qc->flags & ATA_QCFLAG_SENSE_VALID && !qc->err_mask) + continue; + + nr_failed++; + } + + if (!nr_failed && !ehc->i.err_mask) + return; + + frozen = ""; + if (ap->pflags & ATA_PFLAG_FROZEN) + frozen = " frozen"; + + if (ap->eh_tries < ATA_EH_MAX_TRIES) + snprintf(tries_buf, sizeof(tries_buf), " t%d", + ap->eh_tries); + + if (ehc->i.dev) { + ata_dev_err(ehc->i.dev, "exception Emask 0x%x " + "SAct 0x%x SErr 0x%x action 0x%x%s%s\n", + ehc->i.err_mask, link->sactive, ehc->i.serror, + ehc->i.action, frozen, tries_buf); + if (desc) + ata_dev_err(ehc->i.dev, "%s\n", desc); + } else { + ata_link_err(link, "exception Emask 0x%x " + "SAct 0x%x SErr 0x%x action 0x%x%s%s\n", + ehc->i.err_mask, link->sactive, ehc->i.serror, + ehc->i.action, frozen, tries_buf); + if (desc) + ata_link_err(link, "%s\n", desc); + } + +#ifdef CONFIG_ATA_VERBOSE_ERROR + if (ehc->i.serror) + ata_link_err(link, + "SError: { %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n", + ehc->i.serror & SERR_DATA_RECOVERED ? "RecovData " : "", + ehc->i.serror & SERR_COMM_RECOVERED ? "RecovComm " : "", + ehc->i.serror & SERR_DATA ? "UnrecovData " : "", + ehc->i.serror & SERR_PERSISTENT ? "Persist " : "", + ehc->i.serror & SERR_PROTOCOL ? "Proto " : "", + ehc->i.serror & SERR_INTERNAL ? "HostInt " : "", + ehc->i.serror & SERR_PHYRDY_CHG ? "PHYRdyChg " : "", + ehc->i.serror & SERR_PHY_INT_ERR ? "PHYInt " : "", + ehc->i.serror & SERR_COMM_WAKE ? "CommWake " : "", + ehc->i.serror & SERR_10B_8B_ERR ? "10B8B " : "", + ehc->i.serror & SERR_DISPARITY ? "Dispar " : "", + ehc->i.serror & SERR_CRC ? "BadCRC " : "", + ehc->i.serror & SERR_HANDSHAKE ? "Handshk " : "", + ehc->i.serror & SERR_LINK_SEQ_ERR ? "LinkSeq " : "", + ehc->i.serror & SERR_TRANS_ST_ERROR ? "TrStaTrns " : "", + ehc->i.serror & SERR_UNRECOG_FIS ? "UnrecFIS " : "", + ehc->i.serror & SERR_DEV_XCHG ? "DevExch " : ""); +#endif + + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + struct ata_taskfile *cmd = &qc->tf, *res = &qc->result_tf; + char data_buf[20] = ""; + char cdb_buf[70] = ""; + + if (!(qc->flags & ATA_QCFLAG_FAILED) || + ata_dev_phys_link(qc->dev) != link || !qc->err_mask) + continue; + + if (qc->dma_dir != DMA_NONE) { + static const char *dma_str[] = { + [DMA_BIDIRECTIONAL] = "bidi", + [DMA_TO_DEVICE] = "out", + [DMA_FROM_DEVICE] = "in", + }; + static const char *prot_str[] = { + [ATA_PROT_PIO] = "pio", + [ATA_PROT_DMA] = "dma", + [ATA_PROT_NCQ] = "ncq", + [ATAPI_PROT_PIO] = "pio", + [ATAPI_PROT_DMA] = "dma", + }; + + snprintf(data_buf, sizeof(data_buf), " %s %u %s", + prot_str[qc->tf.protocol], qc->nbytes, + dma_str[qc->dma_dir]); + } + + if (ata_is_atapi(qc->tf.protocol)) { + const u8 *cdb = qc->cdb; + size_t cdb_len = qc->dev->cdb_len; + + if (qc->scsicmd) { + cdb = qc->scsicmd->cmnd; + cdb_len = qc->scsicmd->cmd_len; + } + __scsi_format_command(cdb_buf, sizeof(cdb_buf), + cdb, cdb_len); + } else { + const char *descr = ata_get_cmd_descript(cmd->command); + if (descr) + ata_dev_err(qc->dev, "failed command: %s\n", + descr); + } + + ata_dev_err(qc->dev, + "cmd %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x " + "tag %d%s\n %s" + "res %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x " + "Emask 0x%x (%s)%s\n", + cmd->command, cmd->feature, cmd->nsect, + cmd->lbal, cmd->lbam, cmd->lbah, + cmd->hob_feature, cmd->hob_nsect, + cmd->hob_lbal, cmd->hob_lbam, cmd->hob_lbah, + cmd->device, qc->tag, data_buf, cdb_buf, + res->command, res->feature, res->nsect, + res->lbal, res->lbam, res->lbah, + res->hob_feature, res->hob_nsect, + res->hob_lbal, res->hob_lbam, res->hob_lbah, + res->device, qc->err_mask, ata_err_string(qc->err_mask), + qc->err_mask & AC_ERR_NCQ ? " " : ""); + +#ifdef CONFIG_ATA_VERBOSE_ERROR + if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | + ATA_SENSE | ATA_ERR)) { + if (res->command & ATA_BUSY) + ata_dev_err(qc->dev, "status: { Busy }\n"); + else + ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n", + res->command & ATA_DRDY ? "DRDY " : "", + res->command & ATA_DF ? "DF " : "", + res->command & ATA_DRQ ? "DRQ " : "", + res->command & ATA_SENSE ? "SENSE " : "", + res->command & ATA_ERR ? "ERR " : ""); + } + + if (cmd->command != ATA_CMD_PACKET && + (res->feature & (ATA_ICRC | ATA_UNC | ATA_AMNF | + ATA_IDNF | ATA_ABORTED))) + ata_dev_err(qc->dev, "error: { %s%s%s%s%s}\n", + res->feature & ATA_ICRC ? "ICRC " : "", + res->feature & ATA_UNC ? "UNC " : "", + res->feature & ATA_AMNF ? "AMNF " : "", + res->feature & ATA_IDNF ? "IDNF " : "", + res->feature & ATA_ABORTED ? "ABRT " : ""); +#endif + } +} + +/** + * ata_eh_report - report error handling to user + * @ap: ATA port to report EH about + * + * Report EH to user. + * + * LOCKING: + * None. + */ +void ata_eh_report(struct ata_port *ap) +{ + struct ata_link *link; + + ata_for_each_link(link, ap, HOST_FIRST) + ata_eh_link_report(link); +} + +static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset, + unsigned int *classes, unsigned long deadline, + bool clear_classes) +{ + struct ata_device *dev; + + if (clear_classes) + ata_for_each_dev(dev, link, ALL) + classes[dev->devno] = ATA_DEV_UNKNOWN; + + return reset(link, classes, deadline); +} + +static int ata_eh_followup_srst_needed(struct ata_link *link, int rc) +{ + if ((link->flags & ATA_LFLAG_NO_SRST) || ata_link_offline(link)) + return 0; + if (rc == -EAGAIN) + return 1; + if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) + return 1; + return 0; +} + +int ata_eh_reset(struct ata_link *link, int classify, + ata_prereset_fn_t prereset, ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) +{ + struct ata_port *ap = link->ap; + struct ata_link *slave = ap->slave_link; + struct ata_eh_context *ehc = &link->eh_context; + struct ata_eh_context *sehc = slave ? &slave->eh_context : NULL; + unsigned int *classes = ehc->classes; + unsigned int lflags = link->flags; + int verbose = !(ehc->i.flags & ATA_EHI_QUIET); + int max_tries = 0, try = 0; + struct ata_link *failed_link; + struct ata_device *dev; + unsigned long deadline, now; + ata_reset_fn_t reset; + unsigned long flags; + u32 sstatus; + int nr_unknown, rc; + + /* + * Prepare to reset + */ + while (ata_eh_reset_timeouts[max_tries] != ULONG_MAX) + max_tries++; + if (link->flags & ATA_LFLAG_RST_ONCE) + max_tries = 1; + if (link->flags & ATA_LFLAG_NO_HRST) + hardreset = NULL; + if (link->flags & ATA_LFLAG_NO_SRST) + softreset = NULL; + + /* make sure each reset attempt is at least COOL_DOWN apart */ + if (ehc->i.flags & ATA_EHI_DID_RESET) { + now = jiffies; + WARN_ON(time_after(ehc->last_reset, now)); + deadline = ata_deadline(ehc->last_reset, + ATA_EH_RESET_COOL_DOWN); + if (time_before(now, deadline)) + schedule_timeout_uninterruptible(deadline - now); + } + + spin_lock_irqsave(ap->lock, flags); + ap->pflags |= ATA_PFLAG_RESETTING; + spin_unlock_irqrestore(ap->lock, flags); + + ata_eh_about_to_do(link, NULL, ATA_EH_RESET); + + ata_for_each_dev(dev, link, ALL) { + /* If we issue an SRST then an ATA drive (not ATAPI) + * may change configuration and be in PIO0 timing. If + * we do a hard reset (or are coming from power on) + * this is true for ATA or ATAPI. Until we've set a + * suitable controller mode we should not touch the + * bus as we may be talking too fast. + */ + dev->pio_mode = XFER_PIO_0; + dev->dma_mode = 0xff; + + /* If the controller has a pio mode setup function + * then use it to set the chipset to rights. Don't + * touch the DMA setup as that will be dealt with when + * configuring devices. + */ + if (ap->ops->set_piomode) + ap->ops->set_piomode(ap, dev); + } + + /* prefer hardreset */ + reset = NULL; + ehc->i.action &= ~ATA_EH_RESET; + if (hardreset) { + reset = hardreset; + ehc->i.action |= ATA_EH_HARDRESET; + } else if (softreset) { + reset = softreset; + ehc->i.action |= ATA_EH_SOFTRESET; + } + + if (prereset) { + unsigned long deadline = ata_deadline(jiffies, + ATA_EH_PRERESET_TIMEOUT); + + if (slave) { + sehc->i.action &= ~ATA_EH_RESET; + sehc->i.action |= ehc->i.action; + } + + rc = prereset(link, deadline); + + /* If present, do prereset on slave link too. Reset + * is skipped iff both master and slave links report + * -ENOENT or clear ATA_EH_RESET. + */ + if (slave && (rc == 0 || rc == -ENOENT)) { + int tmp; + + tmp = prereset(slave, deadline); + if (tmp != -ENOENT) + rc = tmp; + + ehc->i.action |= sehc->i.action; + } + + if (rc) { + if (rc == -ENOENT) { + ata_link_dbg(link, "port disabled--ignoring\n"); + ehc->i.action &= ~ATA_EH_RESET; + + ata_for_each_dev(dev, link, ALL) + classes[dev->devno] = ATA_DEV_NONE; + + rc = 0; + } else + ata_link_err(link, + "prereset failed (errno=%d)\n", + rc); + goto out; + } + + /* prereset() might have cleared ATA_EH_RESET. If so, + * bang classes, thaw and return. + */ + if (reset && !(ehc->i.action & ATA_EH_RESET)) { + ata_for_each_dev(dev, link, ALL) + classes[dev->devno] = ATA_DEV_NONE; + if ((ap->pflags & ATA_PFLAG_FROZEN) && + ata_is_host_link(link)) + ata_eh_thaw_port(ap); + rc = 0; + goto out; + } + } + + retry: + /* + * Perform reset + */ + if (ata_is_host_link(link)) + ata_eh_freeze_port(ap); + + deadline = ata_deadline(jiffies, ata_eh_reset_timeouts[try++]); + + if (reset) { + if (verbose) + ata_link_info(link, "%s resetting link\n", + reset == softreset ? "soft" : "hard"); + + /* mark that this EH session started with reset */ + ehc->last_reset = jiffies; + if (reset == hardreset) + ehc->i.flags |= ATA_EHI_DID_HARDRESET; + else + ehc->i.flags |= ATA_EHI_DID_SOFTRESET; + + rc = ata_do_reset(link, reset, classes, deadline, true); + if (rc && rc != -EAGAIN) { + failed_link = link; + goto fail; + } + + /* hardreset slave link if existent */ + if (slave && reset == hardreset) { + int tmp; + + if (verbose) + ata_link_info(slave, "hard resetting link\n"); + + ata_eh_about_to_do(slave, NULL, ATA_EH_RESET); + tmp = ata_do_reset(slave, reset, classes, deadline, + false); + switch (tmp) { + case -EAGAIN: + rc = -EAGAIN; + case 0: + break; + default: + failed_link = slave; + rc = tmp; + goto fail; + } + } + + /* perform follow-up SRST if necessary */ + if (reset == hardreset && + ata_eh_followup_srst_needed(link, rc)) { + reset = softreset; + + if (!reset) { + ata_link_err(link, + "follow-up softreset required but no softreset available\n"); + failed_link = link; + rc = -EINVAL; + goto fail; + } + + ata_eh_about_to_do(link, NULL, ATA_EH_RESET); + rc = ata_do_reset(link, reset, classes, deadline, true); + if (rc) { + failed_link = link; + goto fail; + } + } + } else { + if (verbose) + ata_link_info(link, + "no reset method available, skipping reset\n"); + if (!(lflags & ATA_LFLAG_ASSUME_CLASS)) + lflags |= ATA_LFLAG_ASSUME_ATA; + } + + /* + * Post-reset processing + */ + ata_for_each_dev(dev, link, ALL) { + /* After the reset, the device state is PIO 0 and the + * controller state is undefined. Reset also wakes up + * drives from sleeping mode. + */ + dev->pio_mode = XFER_PIO_0; + dev->flags &= ~ATA_DFLAG_SLEEPING; + + if (ata_phys_link_offline(ata_dev_phys_link(dev))) + continue; + + /* apply class override */ + if (lflags & ATA_LFLAG_ASSUME_ATA) + classes[dev->devno] = ATA_DEV_ATA; + else if (lflags & ATA_LFLAG_ASSUME_SEMB) + classes[dev->devno] = ATA_DEV_SEMB_UNSUP; + } + + /* record current link speed */ + if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0) + link->sata_spd = (sstatus >> 4) & 0xf; + if (slave && sata_scr_read(slave, SCR_STATUS, &sstatus) == 0) + slave->sata_spd = (sstatus >> 4) & 0xf; + + /* thaw the port */ + if (ata_is_host_link(link)) + ata_eh_thaw_port(ap); + + /* postreset() should clear hardware SError. Although SError + * is cleared during link resume, clearing SError here is + * necessary as some PHYs raise hotplug events after SRST. + * This introduces race condition where hotplug occurs between + * reset and here. This race is mediated by cross checking + * link onlineness and classification result later. + */ + if (postreset) { + postreset(link, classes); + if (slave) + postreset(slave, classes); + } + + /* + * Some controllers can't be frozen very well and may set spurious + * error conditions during reset. Clear accumulated error + * information and re-thaw the port if frozen. As reset is the + * final recovery action and we cross check link onlineness against + * device classification later, no hotplug event is lost by this. + */ + spin_lock_irqsave(link->ap->lock, flags); + memset(&link->eh_info, 0, sizeof(link->eh_info)); + if (slave) + memset(&slave->eh_info, 0, sizeof(link->eh_info)); + ap->pflags &= ~ATA_PFLAG_EH_PENDING; + spin_unlock_irqrestore(link->ap->lock, flags); + + if (ap->pflags & ATA_PFLAG_FROZEN) + ata_eh_thaw_port(ap); + + /* + * Make sure onlineness and classification result correspond. + * Hotplug could have happened during reset and some + * controllers fail to wait while a drive is spinning up after + * being hotplugged causing misdetection. By cross checking + * link on/offlineness and classification result, those + * conditions can be reliably detected and retried. + */ + nr_unknown = 0; + ata_for_each_dev(dev, link, ALL) { + if (ata_phys_link_online(ata_dev_phys_link(dev))) { + if (classes[dev->devno] == ATA_DEV_UNKNOWN) { + ata_dev_dbg(dev, "link online but device misclassified\n"); + classes[dev->devno] = ATA_DEV_NONE; + nr_unknown++; + } + } else if (ata_phys_link_offline(ata_dev_phys_link(dev))) { + if (ata_class_enabled(classes[dev->devno])) + ata_dev_dbg(dev, + "link offline, clearing class %d to NONE\n", + classes[dev->devno]); + classes[dev->devno] = ATA_DEV_NONE; + } else if (classes[dev->devno] == ATA_DEV_UNKNOWN) { + ata_dev_dbg(dev, + "link status unknown, clearing UNKNOWN to NONE\n"); + classes[dev->devno] = ATA_DEV_NONE; + } + } + + if (classify && nr_unknown) { + if (try < max_tries) { + ata_link_warn(link, + "link online but %d devices misclassified, retrying\n", + nr_unknown); + failed_link = link; + rc = -EAGAIN; + goto fail; + } + ata_link_warn(link, + "link online but %d devices misclassified, " + "device detection might fail\n", nr_unknown); + } + + /* reset successful, schedule revalidation */ + ata_eh_done(link, NULL, ATA_EH_RESET); + if (slave) + ata_eh_done(slave, NULL, ATA_EH_RESET); + ehc->last_reset = jiffies; /* update to completion time */ + ehc->i.action |= ATA_EH_REVALIDATE; + link->lpm_policy = ATA_LPM_UNKNOWN; /* reset LPM state */ + + rc = 0; + out: + /* clear hotplug flag */ + ehc->i.flags &= ~ATA_EHI_HOTPLUGGED; + if (slave) + sehc->i.flags &= ~ATA_EHI_HOTPLUGGED; + + spin_lock_irqsave(ap->lock, flags); + ap->pflags &= ~ATA_PFLAG_RESETTING; + spin_unlock_irqrestore(ap->lock, flags); + + return rc; + + fail: + /* if SCR isn't accessible on a fan-out port, PMP needs to be reset */ + if (!ata_is_host_link(link) && + sata_scr_read(link, SCR_STATUS, &sstatus)) + rc = -ERESTART; + + if (try >= max_tries) { + /* + * Thaw host port even if reset failed, so that the port + * can be retried on the next phy event. This risks + * repeated EH runs but seems to be a better tradeoff than + * shutting down a port after a botched hotplug attempt. + */ + if (ata_is_host_link(link)) + ata_eh_thaw_port(ap); + goto out; + } + + now = jiffies; + if (time_before(now, deadline)) { + unsigned long delta = deadline - now; + + ata_link_warn(failed_link, + "reset failed (errno=%d), retrying in %u secs\n", + rc, DIV_ROUND_UP(jiffies_to_msecs(delta), 1000)); + + ata_eh_release(ap); + while (delta) + delta = schedule_timeout_uninterruptible(delta); + ata_eh_acquire(ap); + } + + /* + * While disks spinup behind PMP, some controllers fail sending SRST. + * They need to be reset - as well as the PMP - before retrying. + */ + if (rc == -ERESTART) { + if (ata_is_host_link(link)) + ata_eh_thaw_port(ap); + goto out; + } + + if (try == max_tries - 1) { + sata_down_spd_limit(link, 0); + if (slave) + sata_down_spd_limit(slave, 0); + } else if (rc == -EPIPE) + sata_down_spd_limit(failed_link, 0); + + if (hardreset) + reset = hardreset; + goto retry; +} + +static inline void ata_eh_pull_park_action(struct ata_port *ap) +{ + struct ata_link *link; + struct ata_device *dev; + unsigned long flags; + + /* + * This function can be thought of as an extended version of + * ata_eh_about_to_do() specially crafted to accommodate the + * requirements of ATA_EH_PARK handling. Since the EH thread + * does not leave the do {} while () loop in ata_eh_recover as + * long as the timeout for a park request to *one* device on + * the port has not expired, and since we still want to pick + * up park requests to other devices on the same port or + * timeout updates for the same device, we have to pull + * ATA_EH_PARK actions from eh_info into eh_context.i + * ourselves at the beginning of each pass over the loop. + * + * Additionally, all write accesses to &ap->park_req_pending + * through reinit_completion() (see below) or complete_all() + * (see ata_scsi_park_store()) are protected by the host lock. + * As a result we have that park_req_pending.done is zero on + * exit from this function, i.e. when ATA_EH_PARK actions for + * *all* devices on port ap have been pulled into the + * respective eh_context structs. If, and only if, + * park_req_pending.done is non-zero by the time we reach + * wait_for_completion_timeout(), another ATA_EH_PARK action + * has been scheduled for at least one of the devices on port + * ap and we have to cycle over the do {} while () loop in + * ata_eh_recover() again. + */ + + spin_lock_irqsave(ap->lock, flags); + reinit_completion(&ap->park_req_pending); + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, link, ALL) { + struct ata_eh_info *ehi = &link->eh_info; + + link->eh_context.i.dev_action[dev->devno] |= + ehi->dev_action[dev->devno] & ATA_EH_PARK; + ata_eh_clear_action(link, dev, ehi, ATA_EH_PARK); + } + } + spin_unlock_irqrestore(ap->lock, flags); +} + +static void ata_eh_park_issue_cmd(struct ata_device *dev, int park) +{ + struct ata_eh_context *ehc = &dev->link->eh_context; + struct ata_taskfile tf; + unsigned int err_mask; + + ata_tf_init(dev, &tf); + if (park) { + ehc->unloaded_mask |= 1 << dev->devno; + tf.command = ATA_CMD_IDLEIMMEDIATE; + tf.feature = 0x44; + tf.lbal = 0x4c; + tf.lbam = 0x4e; + tf.lbah = 0x55; + } else { + ehc->unloaded_mask &= ~(1 << dev->devno); + tf.command = ATA_CMD_CHK_POWER; + } + + tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + tf.protocol |= ATA_PROT_NODATA; + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + if (park && (err_mask || tf.lbal != 0xc4)) { + ata_dev_err(dev, "head unload failed!\n"); + ehc->unloaded_mask &= ~(1 << dev->devno); + } +} + +static int ata_eh_revalidate_and_attach(struct ata_link *link, + struct ata_device **r_failed_dev) +{ + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; + struct ata_device *dev; + unsigned int new_mask = 0; + unsigned long flags; + int rc = 0; + + DPRINTK("ENTER\n"); + + /* For PATA drive side cable detection to work, IDENTIFY must + * be done backwards such that PDIAG- is released by the slave + * device before the master device is identified. + */ + ata_for_each_dev(dev, link, ALL_REVERSE) { + unsigned int action = ata_eh_dev_action(dev); + unsigned int readid_flags = 0; + + if (ehc->i.flags & ATA_EHI_DID_RESET) + readid_flags |= ATA_READID_POSTRESET; + + if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) { + WARN_ON(dev->class == ATA_DEV_PMP); + + if (ata_phys_link_offline(ata_dev_phys_link(dev))) { + rc = -EIO; + goto err; + } + + ata_eh_about_to_do(link, dev, ATA_EH_REVALIDATE); + rc = ata_dev_revalidate(dev, ehc->classes[dev->devno], + readid_flags); + if (rc) + goto err; + + ata_eh_done(link, dev, ATA_EH_REVALIDATE); + + /* Configuration may have changed, reconfigure + * transfer mode. + */ + ehc->i.flags |= ATA_EHI_SETMODE; + + /* schedule the scsi_rescan_device() here */ + schedule_work(&(ap->scsi_rescan_task)); + } else if (dev->class == ATA_DEV_UNKNOWN && + ehc->tries[dev->devno] && + ata_class_enabled(ehc->classes[dev->devno])) { + /* Temporarily set dev->class, it will be + * permanently set once all configurations are + * complete. This is necessary because new + * device configuration is done in two + * separate loops. + */ + dev->class = ehc->classes[dev->devno]; + + if (dev->class == ATA_DEV_PMP) + rc = sata_pmp_attach(dev); + else + rc = ata_dev_read_id(dev, &dev->class, + readid_flags, dev->id); + + /* read_id might have changed class, store and reset */ + ehc->classes[dev->devno] = dev->class; + dev->class = ATA_DEV_UNKNOWN; + + switch (rc) { + case 0: + /* clear error info accumulated during probe */ + ata_ering_clear(&dev->ering); + new_mask |= 1 << dev->devno; + break; + case -ENOENT: + /* IDENTIFY was issued to non-existent + * device. No need to reset. Just + * thaw and ignore the device. + */ + ata_eh_thaw_port(ap); + break; + default: + goto err; + } + } + } + + /* PDIAG- should have been released, ask cable type if post-reset */ + if ((ehc->i.flags & ATA_EHI_DID_RESET) && ata_is_host_link(link)) { + if (ap->ops->cable_detect) + ap->cbl = ap->ops->cable_detect(ap); + ata_force_cbl(ap); + } + + /* Configure new devices forward such that user doesn't see + * device detection messages backwards. + */ + ata_for_each_dev(dev, link, ALL) { + if (!(new_mask & (1 << dev->devno))) + continue; + + dev->class = ehc->classes[dev->devno]; + + if (dev->class == ATA_DEV_PMP) + continue; + + ehc->i.flags |= ATA_EHI_PRINTINFO; + rc = ata_dev_configure(dev); + ehc->i.flags &= ~ATA_EHI_PRINTINFO; + if (rc) { + dev->class = ATA_DEV_UNKNOWN; + goto err; + } + + spin_lock_irqsave(ap->lock, flags); + ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; + spin_unlock_irqrestore(ap->lock, flags); + + /* new device discovered, configure xfermode */ + ehc->i.flags |= ATA_EHI_SETMODE; + } + + return 0; + + err: + *r_failed_dev = dev; + DPRINTK("EXIT rc=%d\n", rc); + return rc; +} + +/** + * ata_set_mode - Program timings and issue SET FEATURES - XFER + * @link: link on which timings will be programmed + * @r_failed_dev: out parameter for failed device + * + * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If + * ata_set_mode() fails, pointer to the failing device is + * returned in @r_failed_dev. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * 0 on success, negative errno otherwise + */ +int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) +{ + struct ata_port *ap = link->ap; + struct ata_device *dev; + int rc; + + /* if data transfer is verified, clear DUBIOUS_XFER on ering top */ + ata_for_each_dev(dev, link, ENABLED) { + if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) { + struct ata_ering_entry *ent; + + ent = ata_ering_top(&dev->ering); + if (ent) + ent->eflags &= ~ATA_EFLAG_DUBIOUS_XFER; + } + } + + /* has private set_mode? */ + if (ap->ops->set_mode) + rc = ap->ops->set_mode(link, r_failed_dev); + else + rc = ata_do_set_mode(link, r_failed_dev); + + /* if transfer mode has changed, set DUBIOUS_XFER on device */ + ata_for_each_dev(dev, link, ENABLED) { + struct ata_eh_context *ehc = &link->eh_context; + u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno]; + u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno)); + + if (dev->xfer_mode != saved_xfer_mode || + ata_ncq_enabled(dev) != saved_ncq) + dev->flags |= ATA_DFLAG_DUBIOUS_XFER; + } + + return rc; +} + +/** + * atapi_eh_clear_ua - Clear ATAPI UNIT ATTENTION after reset + * @dev: ATAPI device to clear UA for + * + * Resets and other operations can make an ATAPI device raise + * UNIT ATTENTION which causes the next operation to fail. This + * function clears UA. + * + * LOCKING: + * EH context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int atapi_eh_clear_ua(struct ata_device *dev) +{ + int i; + + for (i = 0; i < ATA_EH_UA_TRIES; i++) { + u8 *sense_buffer = dev->link->ap->sector_buf; + u8 sense_key = 0; + unsigned int err_mask; + + err_mask = atapi_eh_tur(dev, &sense_key); + if (err_mask != 0 && err_mask != AC_ERR_DEV) { + ata_dev_warn(dev, + "TEST_UNIT_READY failed (err_mask=0x%x)\n", + err_mask); + return -EIO; + } + + if (!err_mask || sense_key != UNIT_ATTENTION) + return 0; + + err_mask = atapi_eh_request_sense(dev, sense_buffer, sense_key); + if (err_mask) { + ata_dev_warn(dev, "failed to clear " + "UNIT ATTENTION (err_mask=0x%x)\n", err_mask); + return -EIO; + } + } + + ata_dev_warn(dev, "UNIT ATTENTION persists after %d tries\n", + ATA_EH_UA_TRIES); + + return 0; +} + +/** + * ata_eh_maybe_retry_flush - Retry FLUSH if necessary + * @dev: ATA device which may need FLUSH retry + * + * If @dev failed FLUSH, it needs to be reported upper layer + * immediately as it means that @dev failed to remap and already + * lost at least a sector and further FLUSH retrials won't make + * any difference to the lost sector. However, if FLUSH failed + * for other reasons, for example transmission error, FLUSH needs + * to be retried. + * + * This function determines whether FLUSH failure retry is + * necessary and performs it if so. + * + * RETURNS: + * 0 if EH can continue, -errno if EH needs to be repeated. + */ +static int ata_eh_maybe_retry_flush(struct ata_device *dev) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + struct ata_queued_cmd *qc; + struct ata_taskfile tf; + unsigned int err_mask; + int rc = 0; + + /* did flush fail for this device? */ + if (!ata_tag_valid(link->active_tag)) + return 0; + + qc = __ata_qc_from_tag(ap, link->active_tag); + if (qc->dev != dev || (qc->tf.command != ATA_CMD_FLUSH_EXT && + qc->tf.command != ATA_CMD_FLUSH)) + return 0; + + /* if the device failed it, it should be reported to upper layers */ + if (qc->err_mask & AC_ERR_DEV) + return 0; + + /* flush failed for some other reason, give it another shot */ + ata_tf_init(dev, &tf); + + tf.command = qc->tf.command; + tf.flags |= ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_NODATA; + + ata_dev_warn(dev, "retrying FLUSH 0x%x Emask 0x%x\n", + tf.command, qc->err_mask); + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + if (!err_mask) { + /* + * FLUSH is complete but there's no way to + * successfully complete a failed command from EH. + * Making sure retry is allowed at least once and + * retrying it should do the trick - whatever was in + * the cache is already on the platter and this won't + * cause infinite loop. + */ + qc->scsicmd->allowed = max(qc->scsicmd->allowed, 1); + } else { + ata_dev_warn(dev, "FLUSH failed Emask 0x%x\n", + err_mask); + rc = -EIO; + + /* if device failed it, report it to upper layers */ + if (err_mask & AC_ERR_DEV) { + qc->err_mask |= AC_ERR_DEV; + qc->result_tf = tf; + if (!(ap->pflags & ATA_PFLAG_FROZEN)) + rc = 0; + } + } + return rc; +} + +/** + * ata_eh_set_lpm - configure SATA interface power management + * @link: link to configure power management + * @policy: the link power management policy + * @r_failed_dev: out parameter for failed device + * + * Enable SATA Interface power management. This will enable + * Device Interface Power Management (DIPM) for min_power + * policy, and then call driver specific callbacks for + * enabling Host Initiated Power management. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + struct ata_device **r_failed_dev) +{ + struct ata_port *ap = ata_is_host_link(link) ? link->ap : NULL; + struct ata_eh_context *ehc = &link->eh_context; + struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL; + enum ata_lpm_policy old_policy = link->lpm_policy; + bool no_dipm = link->ap->flags & ATA_FLAG_NO_DIPM; + unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM; + unsigned int err_mask; + int rc; + + /* if the link or host doesn't do LPM, noop */ + if ((link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm)) + return 0; + + /* + * DIPM is enabled only for MIN_POWER and FIRMWARE_DEFAULT as some + * devices misbehave when the host NACKs transition to SLUMBER. + * Order device and link configurations such that the host always + * allows DIPM requests. + */ + ata_for_each_dev(dev, link, ENABLED) { + bool hipm = ata_id_has_hipm(dev->id); + bool dipm = ata_id_has_dipm(dev->id) && !no_dipm; + + /* find the first enabled and LPM enabled devices */ + if (!link_dev) + link_dev = dev; + + if (!lpm_dev && (hipm || dipm)) + lpm_dev = dev; + + hints &= ~ATA_LPM_EMPTY; + if (!hipm) + hints &= ~ATA_LPM_HIPM; + + /* disable DIPM before changing link config */ + if (policy != ATA_LPM_MIN_POWER && dipm) { + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_DISABLE, SATA_DIPM); + if (err_mask && err_mask != AC_ERR_DEV) { + ata_dev_warn(dev, + "failed to disable DIPM, Emask 0x%x\n", + err_mask); + rc = -EIO; + goto fail; + } + } + } + + if (ap) { + rc = ap->ops->set_lpm(link, policy, hints); + if (!rc && ap->slave_link) + rc = ap->ops->set_lpm(ap->slave_link, policy, hints); + } else + rc = sata_pmp_set_lpm(link, policy, hints); + + /* + * Attribute link config failure to the first (LPM) enabled + * device on the link. + */ + if (rc) { + if (rc == -EOPNOTSUPP) { + link->flags |= ATA_LFLAG_NO_LPM; + return 0; + } + dev = lpm_dev ? lpm_dev : link_dev; + goto fail; + } + + /* + * Low level driver acked the transition. Issue DIPM command + * with the new policy set. + */ + link->lpm_policy = policy; + if (ap && ap->slave_link) + ap->slave_link->lpm_policy = policy; + + /* host config updated, enable DIPM if transitioning to MIN_POWER or + * FIRMWARE_DEFAULT when enabled by firmware + */ + ata_for_each_dev(dev, link, ENABLED) { + if ((policy == ATA_LPM_MIN_POWER && !no_dipm && + ata_id_has_dipm(dev->id)) || + (policy == ATA_LPM_FIRMWARE_DEFAULTS && dev->init_dipm)) { + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_ENABLE, SATA_DIPM); + if (err_mask && err_mask != AC_ERR_DEV) { + ata_dev_warn(dev, + "failed to enable DIPM, Emask 0x%x\n", + err_mask); + rc = -EIO; + goto fail; + } + } + } + + link->last_lpm_change = jiffies; + link->flags |= ATA_LFLAG_CHANGED; + + return 0; + +fail: + /* restore the old policy */ + link->lpm_policy = old_policy; + if (ap && ap->slave_link) + ap->slave_link->lpm_policy = old_policy; + + /* if no device or only one more chance is left, disable LPM */ + if (!dev || ehc->tries[dev->devno] <= 2) { + ata_link_warn(link, "disabling LPM on the link\n"); + link->flags |= ATA_LFLAG_NO_LPM; + } + if (r_failed_dev) + *r_failed_dev = dev; + return rc; +} + +int ata_link_nr_enabled(struct ata_link *link) +{ + struct ata_device *dev; + int cnt = 0; + + ata_for_each_dev(dev, link, ENABLED) + cnt++; + return cnt; +} + +static int ata_link_nr_vacant(struct ata_link *link) +{ + struct ata_device *dev; + int cnt = 0; + + ata_for_each_dev(dev, link, ALL) + if (dev->class == ATA_DEV_UNKNOWN) + cnt++; + return cnt; +} + +static int ata_eh_skip_recovery(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; + struct ata_device *dev; + + /* skip disabled links */ + if (link->flags & ATA_LFLAG_DISABLED) + return 1; + + /* skip if explicitly requested */ + if (ehc->i.flags & ATA_EHI_NO_RECOVERY) + return 1; + + /* thaw frozen port and recover failed devices */ + if ((ap->pflags & ATA_PFLAG_FROZEN) || ata_link_nr_enabled(link)) + return 0; + + /* reset at least once if reset is requested */ + if ((ehc->i.action & ATA_EH_RESET) && + !(ehc->i.flags & ATA_EHI_DID_RESET)) + return 0; + + /* skip if class codes for all vacant slots are ATA_DEV_NONE */ + ata_for_each_dev(dev, link, ALL) { + if (dev->class == ATA_DEV_UNKNOWN && + ehc->classes[dev->devno] != ATA_DEV_NONE) + return 0; + } + + return 1; +} + +static int ata_count_probe_trials_cb(struct ata_ering_entry *ent, void *void_arg) +{ + u64 interval = msecs_to_jiffies(ATA_EH_PROBE_TRIAL_INTERVAL); + u64 now = get_jiffies_64(); + int *trials = void_arg; + + if ((ent->eflags & ATA_EFLAG_OLD_ER) || + (ent->timestamp < now - min(now, interval))) + return -1; + + (*trials)++; + return 0; +} + +static int ata_eh_schedule_probe(struct ata_device *dev) +{ + struct ata_eh_context *ehc = &dev->link->eh_context; + struct ata_link *link = ata_dev_phys_link(dev); + int trials = 0; + + if (!(ehc->i.probe_mask & (1 << dev->devno)) || + (ehc->did_probe_mask & (1 << dev->devno))) + return 0; + + ata_eh_detach_dev(dev); + ata_dev_init(dev); + ehc->did_probe_mask |= (1 << dev->devno); + ehc->i.action |= ATA_EH_RESET; + ehc->saved_xfer_mode[dev->devno] = 0; + ehc->saved_ncq_enabled &= ~(1 << dev->devno); + + /* the link maybe in a deep sleep, wake it up */ + if (link->lpm_policy > ATA_LPM_MAX_POWER) { + if (ata_is_host_link(link)) + link->ap->ops->set_lpm(link, ATA_LPM_MAX_POWER, + ATA_LPM_EMPTY); + else + sata_pmp_set_lpm(link, ATA_LPM_MAX_POWER, + ATA_LPM_EMPTY); + } + + /* Record and count probe trials on the ering. The specific + * error mask used is irrelevant. Because a successful device + * detection clears the ering, this count accumulates only if + * there are consecutive failed probes. + * + * If the count is equal to or higher than ATA_EH_PROBE_TRIALS + * in the last ATA_EH_PROBE_TRIAL_INTERVAL, link speed is + * forced to 1.5Gbps. + * + * This is to work around cases where failed link speed + * negotiation results in device misdetection leading to + * infinite DEVXCHG or PHRDY CHG events. + */ + ata_ering_record(&dev->ering, 0, AC_ERR_OTHER); + ata_ering_map(&dev->ering, ata_count_probe_trials_cb, &trials); + + if (trials > ATA_EH_PROBE_TRIALS) + sata_down_spd_limit(link, 1); + + return 1; +} + +static int ata_eh_handle_dev_fail(struct ata_device *dev, int err) +{ + struct ata_eh_context *ehc = &dev->link->eh_context; + + /* -EAGAIN from EH routine indicates retry without prejudice. + * The requester is responsible for ensuring forward progress. + */ + if (err != -EAGAIN) + ehc->tries[dev->devno]--; + + switch (err) { + case -ENODEV: + /* device missing or wrong IDENTIFY data, schedule probing */ + ehc->i.probe_mask |= (1 << dev->devno); + case -EINVAL: + /* give it just one more chance */ + ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1); + case -EIO: + if (ehc->tries[dev->devno] == 1) { + /* This is the last chance, better to slow + * down than lose it. + */ + sata_down_spd_limit(ata_dev_phys_link(dev), 0); + if (dev->pio_mode > XFER_PIO_0) + ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); + } + } + + if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) { + /* disable device if it has used up all its chances */ + ata_dev_disable(dev); + + /* detach if offline */ + if (ata_phys_link_offline(ata_dev_phys_link(dev))) + ata_eh_detach_dev(dev); + + /* schedule probe if necessary */ + if (ata_eh_schedule_probe(dev)) { + ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; + memset(ehc->cmd_timeout_idx[dev->devno], 0, + sizeof(ehc->cmd_timeout_idx[dev->devno])); + } + + return 1; + } else { + ehc->i.action |= ATA_EH_RESET; + return 0; + } +} + +/** + * ata_eh_recover - recover host port after error + * @ap: host port to recover + * @prereset: prereset method (can be NULL) + * @softreset: softreset method (can be NULL) + * @hardreset: hardreset method (can be NULL) + * @postreset: postreset method (can be NULL) + * @r_failed_link: out parameter for failed link + * + * This is the alpha and omega, eum and yang, heart and soul of + * libata exception handling. On entry, actions required to + * recover each link and hotplug requests are recorded in the + * link's eh_context. This function executes all the operations + * with appropriate retrials and fallbacks to resurrect failed + * devices, detach goners and greet newcomers. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset, + struct ata_link **r_failed_link) +{ + struct ata_link *link; + struct ata_device *dev; + int rc, nr_fails; + unsigned long flags, deadline; + + DPRINTK("ENTER\n"); + + /* prep for recovery */ + ata_for_each_link(link, ap, EDGE) { + struct ata_eh_context *ehc = &link->eh_context; + + /* re-enable link? */ + if (ehc->i.action & ATA_EH_ENABLE_LINK) { + ata_eh_about_to_do(link, NULL, ATA_EH_ENABLE_LINK); + spin_lock_irqsave(ap->lock, flags); + link->flags &= ~ATA_LFLAG_DISABLED; + spin_unlock_irqrestore(ap->lock, flags); + ata_eh_done(link, NULL, ATA_EH_ENABLE_LINK); + } + + ata_for_each_dev(dev, link, ALL) { + if (link->flags & ATA_LFLAG_NO_RETRY) + ehc->tries[dev->devno] = 1; + else + ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; + + /* collect port action mask recorded in dev actions */ + ehc->i.action |= ehc->i.dev_action[dev->devno] & + ~ATA_EH_PERDEV_MASK; + ehc->i.dev_action[dev->devno] &= ATA_EH_PERDEV_MASK; + + /* process hotplug request */ + if (dev->flags & ATA_DFLAG_DETACH) + ata_eh_detach_dev(dev); + + /* schedule probe if necessary */ + if (!ata_dev_enabled(dev)) + ata_eh_schedule_probe(dev); + } + } + + retry: + rc = 0; + + /* if UNLOADING, finish immediately */ + if (ap->pflags & ATA_PFLAG_UNLOADING) + goto out; + + /* prep for EH */ + ata_for_each_link(link, ap, EDGE) { + struct ata_eh_context *ehc = &link->eh_context; + + /* skip EH if possible. */ + if (ata_eh_skip_recovery(link)) + ehc->i.action = 0; + + ata_for_each_dev(dev, link, ALL) + ehc->classes[dev->devno] = ATA_DEV_UNKNOWN; + } + + /* reset */ + ata_for_each_link(link, ap, EDGE) { + struct ata_eh_context *ehc = &link->eh_context; + + if (!(ehc->i.action & ATA_EH_RESET)) + continue; + + rc = ata_eh_reset(link, ata_link_nr_vacant(link), + prereset, softreset, hardreset, postreset); + if (rc) { + ata_link_err(link, "reset failed, giving up\n"); + goto out; + } + } + + do { + unsigned long now; + + /* + * clears ATA_EH_PARK in eh_info and resets + * ap->park_req_pending + */ + ata_eh_pull_park_action(ap); + + deadline = jiffies; + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, link, ALL) { + struct ata_eh_context *ehc = &link->eh_context; + unsigned long tmp; + + if (dev->class != ATA_DEV_ATA && + dev->class != ATA_DEV_ZAC) + continue; + if (!(ehc->i.dev_action[dev->devno] & + ATA_EH_PARK)) + continue; + tmp = dev->unpark_deadline; + if (time_before(deadline, tmp)) + deadline = tmp; + else if (time_before_eq(tmp, jiffies)) + continue; + if (ehc->unloaded_mask & (1 << dev->devno)) + continue; + + ata_eh_park_issue_cmd(dev, 1); + } + } + + now = jiffies; + if (time_before_eq(deadline, now)) + break; + + ata_eh_release(ap); + deadline = wait_for_completion_timeout(&ap->park_req_pending, + deadline - now); + ata_eh_acquire(ap); + } while (deadline); + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, link, ALL) { + if (!(link->eh_context.unloaded_mask & + (1 << dev->devno))) + continue; + + ata_eh_park_issue_cmd(dev, 0); + ata_eh_done(link, dev, ATA_EH_PARK); + } + } + + /* the rest */ + nr_fails = 0; + ata_for_each_link(link, ap, PMP_FIRST) { + struct ata_eh_context *ehc = &link->eh_context; + + if (sata_pmp_attached(ap) && ata_is_host_link(link)) + goto config_lpm; + + /* revalidate existing devices and attach new ones */ + rc = ata_eh_revalidate_and_attach(link, &dev); + if (rc) + goto rest_fail; + + /* if PMP got attached, return, pmp EH will take care of it */ + if (link->device->class == ATA_DEV_PMP) { + ehc->i.action = 0; + return 0; + } + + /* configure transfer mode if necessary */ + if (ehc->i.flags & ATA_EHI_SETMODE) { + rc = ata_set_mode(link, &dev); + if (rc) + goto rest_fail; + ehc->i.flags &= ~ATA_EHI_SETMODE; + } + + /* If reset has been issued, clear UA to avoid + * disrupting the current users of the device. + */ + if (ehc->i.flags & ATA_EHI_DID_RESET) { + ata_for_each_dev(dev, link, ALL) { + if (dev->class != ATA_DEV_ATAPI) + continue; + rc = atapi_eh_clear_ua(dev); + if (rc) + goto rest_fail; + if (zpodd_dev_enabled(dev)) + zpodd_post_poweron(dev); + } + } + + /* retry flush if necessary */ + ata_for_each_dev(dev, link, ALL) { + if (dev->class != ATA_DEV_ATA && + dev->class != ATA_DEV_ZAC) + continue; + rc = ata_eh_maybe_retry_flush(dev); + if (rc) + goto rest_fail; + } + + config_lpm: + /* configure link power saving */ + if (link->lpm_policy != ap->target_lpm_policy) { + rc = ata_eh_set_lpm(link, ap->target_lpm_policy, &dev); + if (rc) + goto rest_fail; + } + + /* this link is okay now */ + ehc->i.flags = 0; + continue; + + rest_fail: + nr_fails++; + if (dev) + ata_eh_handle_dev_fail(dev, rc); + + if (ap->pflags & ATA_PFLAG_FROZEN) { + /* PMP reset requires working host port. + * Can't retry if it's frozen. + */ + if (sata_pmp_attached(ap)) + goto out; + break; + } + } + + if (nr_fails) + goto retry; + + out: + if (rc && r_failed_link) + *r_failed_link = link; + + DPRINTK("EXIT, rc=%d\n", rc); + return rc; +} + +/** + * ata_eh_finish - finish up EH + * @ap: host port to finish EH for + * + * Recovery is complete. Clean up EH states and retry or finish + * failed qcs. + * + * LOCKING: + * None. + */ +void ata_eh_finish(struct ata_port *ap) +{ + int tag; + + /* retry or finish qcs */ + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED)) + continue; + + if (qc->err_mask) { + /* FIXME: Once EH migration is complete, + * generate sense data in this function, + * considering both err_mask and tf. + */ + if (qc->flags & ATA_QCFLAG_RETRY) + ata_eh_qc_retry(qc); + else + ata_eh_qc_complete(qc); + } else { + if (qc->flags & ATA_QCFLAG_SENSE_VALID) { + ata_eh_qc_complete(qc); + } else { + /* feed zero TF to sense generation */ + memset(&qc->result_tf, 0, sizeof(qc->result_tf)); + ata_eh_qc_retry(qc); + } + } + } + + /* make sure nr_active_links is zero after EH */ + WARN_ON(ap->nr_active_links); + ap->nr_active_links = 0; +} + +/** + * ata_do_eh - do standard error handling + * @ap: host port to handle error for + * + * @prereset: prereset method (can be NULL) + * @softreset: softreset method (can be NULL) + * @hardreset: hardreset method (can be NULL) + * @postreset: postreset method (can be NULL) + * + * Perform standard error handling sequence. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset) +{ + struct ata_device *dev; + int rc; + + ata_eh_autopsy(ap); + ata_eh_report(ap); + + rc = ata_eh_recover(ap, prereset, softreset, hardreset, postreset, + NULL); + if (rc) { + ata_for_each_dev(dev, &ap->link, ALL) + ata_dev_disable(dev); + } + + ata_eh_finish(ap); +} + +/** + * ata_std_error_handler - standard error handler + * @ap: host port to handle error for + * + * Standard error handler + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_std_error_handler(struct ata_port *ap) +{ + struct ata_port_operations *ops = ap->ops; + ata_reset_fn_t hardreset = ops->hardreset; + + /* ignore built-in hardreset if SCR access is not available */ + if (hardreset == sata_std_hardreset && !sata_scr_valid(&ap->link)) + hardreset = NULL; + + ata_do_eh(ap, ops->prereset, ops->softreset, hardreset, ops->postreset); +} + +#ifdef CONFIG_PM +/** + * ata_eh_handle_port_suspend - perform port suspend operation + * @ap: port to suspend + * + * Suspend @ap. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_handle_port_suspend(struct ata_port *ap) +{ + unsigned long flags; + int rc = 0; + struct ata_device *dev; + + /* are we suspending? */ + spin_lock_irqsave(ap->lock, flags); + if (!(ap->pflags & ATA_PFLAG_PM_PENDING) || + ap->pm_mesg.event & PM_EVENT_RESUME) { + spin_unlock_irqrestore(ap->lock, flags); + return; + } + spin_unlock_irqrestore(ap->lock, flags); + + WARN_ON(ap->pflags & ATA_PFLAG_SUSPENDED); + + /* + * If we have a ZPODD attached, check its zero + * power ready status before the port is frozen. + * Only needed for runtime suspend. + */ + if (PMSG_IS_AUTO(ap->pm_mesg)) { + ata_for_each_dev(dev, &ap->link, ENABLED) { + if (zpodd_dev_enabled(dev)) + zpodd_on_suspend(dev); + } + } + + /* tell ACPI we're suspending */ + rc = ata_acpi_on_suspend(ap); + if (rc) + goto out; + + /* suspend */ + ata_eh_freeze_port(ap); + + if (ap->ops->port_suspend) + rc = ap->ops->port_suspend(ap, ap->pm_mesg); + + ata_acpi_set_state(ap, ap->pm_mesg); + out: + /* update the flags */ + spin_lock_irqsave(ap->lock, flags); + + ap->pflags &= ~ATA_PFLAG_PM_PENDING; + if (rc == 0) + ap->pflags |= ATA_PFLAG_SUSPENDED; + else if (ap->pflags & ATA_PFLAG_FROZEN) + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + return; +} + +/** + * ata_eh_handle_port_resume - perform port resume operation + * @ap: port to resume + * + * Resume @ap. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_handle_port_resume(struct ata_port *ap) +{ + struct ata_link *link; + struct ata_device *dev; + unsigned long flags; + int rc = 0; + + /* are we resuming? */ + spin_lock_irqsave(ap->lock, flags); + if (!(ap->pflags & ATA_PFLAG_PM_PENDING) || + !(ap->pm_mesg.event & PM_EVENT_RESUME)) { + spin_unlock_irqrestore(ap->lock, flags); + return; + } + spin_unlock_irqrestore(ap->lock, flags); + + WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED)); + + /* + * Error timestamps are in jiffies which doesn't run while + * suspended and PHY events during resume isn't too uncommon. + * When the two are combined, it can lead to unnecessary speed + * downs if the machine is suspended and resumed repeatedly. + * Clear error history. + */ + ata_for_each_link(link, ap, HOST_FIRST) + ata_for_each_dev(dev, link, ALL) + ata_ering_clear(&dev->ering); + + ata_acpi_set_state(ap, ap->pm_mesg); + + if (ap->ops->port_resume) + rc = ap->ops->port_resume(ap); + + /* tell ACPI that we're resuming */ + ata_acpi_on_resume(ap); + + /* update the flags */ + spin_lock_irqsave(ap->lock, flags); + ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED); + spin_unlock_irqrestore(ap->lock, flags); +} +#endif /* CONFIG_PM */ diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c new file mode 100644 index 000000000..b9f7ce8de --- /dev/null +++ b/drivers/ata/libata-pmp.c @@ -0,0 +1,1106 @@ +/* + * libata-pmp.c - libata port multiplier support + * + * Copyright (c) 2007 SUSE Linux Products GmbH + * Copyright (c) 2007 Tejun Heo + * + * This file is released under the GPLv2. + */ + +#include +#include +#include +#include +#include "libata.h" +#include "libata-transport.h" + +const struct ata_port_operations sata_pmp_port_ops = { + .inherits = &sata_port_ops, + .pmp_prereset = ata_std_prereset, + .pmp_hardreset = sata_std_hardreset, + .pmp_postreset = ata_std_postreset, + .error_handler = sata_pmp_error_handler, +}; + +/** + * sata_pmp_read - read PMP register + * @link: link to read PMP register for + * @reg: register to read + * @r_val: resulting value + * + * Read PMP register. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, AC_ERR_* mask on failure. + */ +static unsigned int sata_pmp_read(struct ata_link *link, int reg, u32 *r_val) +{ + struct ata_port *ap = link->ap; + struct ata_device *pmp_dev = ap->link.device; + struct ata_taskfile tf; + unsigned int err_mask; + + ata_tf_init(pmp_dev, &tf); + tf.command = ATA_CMD_PMP_READ; + tf.protocol = ATA_PROT_NODATA; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48; + tf.feature = reg; + tf.device = link->pmp; + + err_mask = ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0, + SATA_PMP_RW_TIMEOUT); + if (err_mask) + return err_mask; + + *r_val = tf.nsect | tf.lbal << 8 | tf.lbam << 16 | tf.lbah << 24; + return 0; +} + +/** + * sata_pmp_write - write PMP register + * @link: link to write PMP register for + * @reg: register to write + * @r_val: value to write + * + * Write PMP register. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, AC_ERR_* mask on failure. + */ +static unsigned int sata_pmp_write(struct ata_link *link, int reg, u32 val) +{ + struct ata_port *ap = link->ap; + struct ata_device *pmp_dev = ap->link.device; + struct ata_taskfile tf; + + ata_tf_init(pmp_dev, &tf); + tf.command = ATA_CMD_PMP_WRITE; + tf.protocol = ATA_PROT_NODATA; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48; + tf.feature = reg; + tf.device = link->pmp; + tf.nsect = val & 0xff; + tf.lbal = (val >> 8) & 0xff; + tf.lbam = (val >> 16) & 0xff; + tf.lbah = (val >> 24) & 0xff; + + return ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0, + SATA_PMP_RW_TIMEOUT); +} + +/** + * sata_pmp_qc_defer_cmd_switch - qc_defer for command switching PMP + * @qc: ATA command in question + * + * A host which has command switching PMP support cannot issue + * commands to multiple links simultaneously. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * ATA_DEFER_* if deferring is needed, 0 otherwise. + */ +int sata_pmp_qc_defer_cmd_switch(struct ata_queued_cmd *qc) +{ + struct ata_link *link = qc->dev->link; + struct ata_port *ap = link->ap; + + if (ap->excl_link == NULL || ap->excl_link == link) { + if (ap->nr_active_links == 0 || ata_link_active(link)) { + qc->flags |= ATA_QCFLAG_CLEAR_EXCL; + return ata_std_qc_defer(qc); + } + + ap->excl_link = link; + } + + return ATA_DEFER_PORT; +} + +/** + * sata_pmp_scr_read - read PSCR + * @link: ATA link to read PSCR for + * @reg: PSCR to read + * @r_val: resulting value + * + * Read PSCR @reg into @r_val for @link, to be called from + * ata_scr_read(). + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *r_val) +{ + unsigned int err_mask; + + if (reg > SATA_PMP_PSCR_CONTROL) + return -EINVAL; + + err_mask = sata_pmp_read(link, reg, r_val); + if (err_mask) { + ata_link_warn(link, "failed to read SCR %d (Emask=0x%x)\n", + reg, err_mask); + return -EIO; + } + return 0; +} + +/** + * sata_pmp_scr_write - write PSCR + * @link: ATA link to write PSCR for + * @reg: PSCR to write + * @val: value to be written + * + * Write @val to PSCR @reg for @link, to be called from + * ata_scr_write() and ata_scr_write_flush(). + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val) +{ + unsigned int err_mask; + + if (reg > SATA_PMP_PSCR_CONTROL) + return -EINVAL; + + err_mask = sata_pmp_write(link, reg, val); + if (err_mask) { + ata_link_warn(link, "failed to write SCR %d (Emask=0x%x)\n", + reg, err_mask); + return -EIO; + } + return 0; +} + +/** + * sata_pmp_set_lpm - configure LPM for a PMP link + * @link: PMP link to configure LPM for + * @policy: target LPM policy + * @hints: LPM hints + * + * Configure LPM for @link. This function will contain any PMP + * specific workarounds if necessary. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_pmp_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints) +{ + return sata_link_scr_lpm(link, policy, true); +} + +/** + * sata_pmp_read_gscr - read GSCR block of SATA PMP + * @dev: PMP device + * @gscr: buffer to read GSCR block into + * + * Read selected PMP GSCRs from the PMP at @dev. This will serve + * as configuration and identification info for the PMP. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int sata_pmp_read_gscr(struct ata_device *dev, u32 *gscr) +{ + static const int gscr_to_read[] = { 0, 1, 2, 32, 33, 64, 96 }; + int i; + + for (i = 0; i < ARRAY_SIZE(gscr_to_read); i++) { + int reg = gscr_to_read[i]; + unsigned int err_mask; + + err_mask = sata_pmp_read(dev->link, reg, &gscr[reg]); + if (err_mask) { + ata_dev_err(dev, "failed to read PMP GSCR[%d] (Emask=0x%x)\n", + reg, err_mask); + return -EIO; + } + } + + return 0; +} + +static const char *sata_pmp_spec_rev_str(const u32 *gscr) +{ + u32 rev = gscr[SATA_PMP_GSCR_REV]; + + if (rev & (1 << 3)) + return "1.2"; + if (rev & (1 << 2)) + return "1.1"; + if (rev & (1 << 1)) + return "1.0"; + return ""; +} + +#define PMP_GSCR_SII_POL 129 + +static int sata_pmp_configure(struct ata_device *dev, int print_info) +{ + struct ata_port *ap = dev->link->ap; + u32 *gscr = dev->gscr; + u16 vendor = sata_pmp_gscr_vendor(gscr); + u16 devid = sata_pmp_gscr_devid(gscr); + unsigned int err_mask = 0; + const char *reason; + int nr_ports, rc; + + nr_ports = sata_pmp_gscr_ports(gscr); + + if (nr_ports <= 0 || nr_ports > SATA_PMP_MAX_PORTS) { + rc = -EINVAL; + reason = "invalid nr_ports"; + goto fail; + } + + if ((ap->flags & ATA_FLAG_AN) && + (gscr[SATA_PMP_GSCR_FEAT] & SATA_PMP_FEAT_NOTIFY)) + dev->flags |= ATA_DFLAG_AN; + + /* monitor SERR_PHYRDY_CHG on fan-out ports */ + err_mask = sata_pmp_write(dev->link, SATA_PMP_GSCR_ERROR_EN, + SERR_PHYRDY_CHG); + if (err_mask) { + rc = -EIO; + reason = "failed to write GSCR_ERROR_EN"; + goto fail; + } + + /* Disable sending Early R_OK. + * With "cached read" HDD testing and multiple ports busy on a SATA + * host controller, 3x26 PMP will very rarely drop a deferred + * R_OK that was intended for the host. Symptom will be all + * 5 drives under test will timeout, get reset, and recover. + */ + if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) { + u32 reg; + + err_mask = sata_pmp_read(&ap->link, PMP_GSCR_SII_POL, ®); + if (err_mask) { + rc = -EIO; + reason = "failed to read Sil3x26 Private Register"; + goto fail; + } + reg &= ~0x1; + err_mask = sata_pmp_write(&ap->link, PMP_GSCR_SII_POL, reg); + if (err_mask) { + rc = -EIO; + reason = "failed to write Sil3x26 Private Register"; + goto fail; + } + } + + if (print_info) { + ata_dev_info(dev, "Port Multiplier %s, " + "0x%04x:0x%04x r%d, %d ports, feat 0x%x/0x%x\n", + sata_pmp_spec_rev_str(gscr), vendor, devid, + sata_pmp_gscr_rev(gscr), + nr_ports, gscr[SATA_PMP_GSCR_FEAT_EN], + gscr[SATA_PMP_GSCR_FEAT]); + + if (!(dev->flags & ATA_DFLAG_AN)) + ata_dev_info(dev, + "Asynchronous notification not supported, " + "hotplug won't work on fan-out ports. Use warm-plug instead.\n"); + } + + return 0; + + fail: + ata_dev_err(dev, + "failed to configure Port Multiplier (%s, Emask=0x%x)\n", + reason, err_mask); + return rc; +} + +static int sata_pmp_init_links (struct ata_port *ap, int nr_ports) +{ + struct ata_link *pmp_link = ap->pmp_link; + int i, err; + + if (!pmp_link) { + pmp_link = kzalloc(sizeof(pmp_link[0]) * SATA_PMP_MAX_PORTS, + GFP_NOIO); + if (!pmp_link) + return -ENOMEM; + + for (i = 0; i < SATA_PMP_MAX_PORTS; i++) + ata_link_init(ap, &pmp_link[i], i); + + ap->pmp_link = pmp_link; + + for (i = 0; i < SATA_PMP_MAX_PORTS; i++) { + err = ata_tlink_add(&pmp_link[i]); + if (err) { + goto err_tlink; + } + } + } + + for (i = 0; i < nr_ports; i++) { + struct ata_link *link = &pmp_link[i]; + struct ata_eh_context *ehc = &link->eh_context; + + link->flags = 0; + ehc->i.probe_mask |= ATA_ALL_DEVICES; + ehc->i.action |= ATA_EH_RESET; + } + + return 0; + err_tlink: + while (--i >= 0) + ata_tlink_delete(&pmp_link[i]); + kfree(pmp_link); + ap->pmp_link = NULL; + return err; +} + +static void sata_pmp_quirks(struct ata_port *ap) +{ + u32 *gscr = ap->link.device->gscr; + u16 vendor = sata_pmp_gscr_vendor(gscr); + u16 devid = sata_pmp_gscr_devid(gscr); + struct ata_link *link; + + if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) { + /* sil3x26 quirks */ + ata_for_each_link(link, ap, EDGE) { + /* link reports offline after LPM */ + link->flags |= ATA_LFLAG_NO_LPM; + + /* + * Class code report is unreliable and SRST times + * out under certain configurations. + */ + if (link->pmp < 5) + link->flags |= ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_ATA; + + /* port 5 is for SEMB device and it doesn't like SRST */ + if (link->pmp == 5) + link->flags |= ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_SEMB; + } + } else if (vendor == 0x1095 && devid == 0x4723) { + /* + * sil4723 quirks + * + * Link reports offline after LPM. Class code report is + * unreliable. SIMG PMPs never got SRST reliable and the + * config device at port 2 locks up on SRST. + */ + ata_for_each_link(link, ap, EDGE) + link->flags |= ATA_LFLAG_NO_LPM | + ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_ATA; + } else if (vendor == 0x1095 && devid == 0x4726) { + /* sil4726 quirks */ + ata_for_each_link(link, ap, EDGE) { + /* link reports offline after LPM */ + link->flags |= ATA_LFLAG_NO_LPM; + + /* Class code report is unreliable and SRST + * times out under certain configurations. + * Config device can be at port 0 or 5 and + * locks up on SRST. + */ + if (link->pmp <= 5) + link->flags |= ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_ATA; + + /* Port 6 is for SEMB device which doesn't + * like SRST either. + */ + if (link->pmp == 6) + link->flags |= ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_SEMB; + } + } else if (vendor == 0x1095 && (devid == 0x5723 || devid == 0x5733 || + devid == 0x5734 || devid == 0x5744)) { + /* sil5723/5744 quirks */ + + /* sil5723/5744 has either two or three downstream + * ports depending on operation mode. The last port + * is empty if any actual IO device is available or + * occupied by a pseudo configuration device + * otherwise. Don't try hard to recover it. + */ + ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY; + } else if (vendor == 0x197b && (devid == 0x2352 || devid == 0x0325)) { + /* + * 0x2352: found in Thermaltake BlackX Duet, jmicron JMB350? + * 0x0325: jmicron JMB394. + */ + ata_for_each_link(link, ap, EDGE) { + /* SRST breaks detection and disks get misclassified + * LPM disabled to avoid potential problems + */ + link->flags |= ATA_LFLAG_NO_LPM | + ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_ATA; + } + } +} + +/** + * sata_pmp_attach - attach a SATA PMP device + * @dev: SATA PMP device to attach + * + * Configure and attach SATA PMP device @dev. This function is + * also responsible for allocating and initializing PMP links. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_pmp_attach(struct ata_device *dev) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + unsigned long flags; + struct ata_link *tlink; + int rc; + + /* is it hanging off the right place? */ + if (!sata_pmp_supported(ap)) { + ata_dev_err(dev, "host does not support Port Multiplier\n"); + return -EINVAL; + } + + if (!ata_is_host_link(link)) { + ata_dev_err(dev, "Port Multipliers cannot be nested\n"); + return -EINVAL; + } + + if (dev->devno) { + ata_dev_err(dev, "Port Multiplier must be the first device\n"); + return -EINVAL; + } + + WARN_ON(link->pmp != 0); + link->pmp = SATA_PMP_CTRL_PORT; + + /* read GSCR block */ + rc = sata_pmp_read_gscr(dev, dev->gscr); + if (rc) + goto fail; + + /* config PMP */ + rc = sata_pmp_configure(dev, 1); + if (rc) + goto fail; + + rc = sata_pmp_init_links(ap, sata_pmp_gscr_ports(dev->gscr)); + if (rc) { + ata_dev_info(dev, "failed to initialize PMP links\n"); + goto fail; + } + + /* attach it */ + spin_lock_irqsave(ap->lock, flags); + WARN_ON(ap->nr_pmp_links); + ap->nr_pmp_links = sata_pmp_gscr_ports(dev->gscr); + spin_unlock_irqrestore(ap->lock, flags); + + sata_pmp_quirks(ap); + + if (ap->ops->pmp_attach) + ap->ops->pmp_attach(ap); + + ata_for_each_link(tlink, ap, EDGE) + sata_link_init_config(tlink); + + return 0; + + fail: + link->pmp = 0; + return rc; +} + +/** + * sata_pmp_detach - detach a SATA PMP device + * @dev: SATA PMP device to detach + * + * Detach SATA PMP device @dev. This function is also + * responsible for deconfiguring PMP links. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void sata_pmp_detach(struct ata_device *dev) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + struct ata_link *tlink; + unsigned long flags; + + ata_dev_info(dev, "Port Multiplier detaching\n"); + + WARN_ON(!ata_is_host_link(link) || dev->devno || + link->pmp != SATA_PMP_CTRL_PORT); + + if (ap->ops->pmp_detach) + ap->ops->pmp_detach(ap); + + ata_for_each_link(tlink, ap, EDGE) + ata_eh_detach_dev(tlink->device); + + spin_lock_irqsave(ap->lock, flags); + ap->nr_pmp_links = 0; + link->pmp = 0; + spin_unlock_irqrestore(ap->lock, flags); +} + +/** + * sata_pmp_same_pmp - does new GSCR matches the configured PMP? + * @dev: PMP device to compare against + * @new_gscr: GSCR block of the new device + * + * Compare @new_gscr against @dev and determine whether @dev is + * the PMP described by @new_gscr. + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if @dev matches @new_gscr, 0 otherwise. + */ +static int sata_pmp_same_pmp(struct ata_device *dev, const u32 *new_gscr) +{ + const u32 *old_gscr = dev->gscr; + u16 old_vendor, new_vendor, old_devid, new_devid; + int old_nr_ports, new_nr_ports; + + old_vendor = sata_pmp_gscr_vendor(old_gscr); + new_vendor = sata_pmp_gscr_vendor(new_gscr); + old_devid = sata_pmp_gscr_devid(old_gscr); + new_devid = sata_pmp_gscr_devid(new_gscr); + old_nr_ports = sata_pmp_gscr_ports(old_gscr); + new_nr_ports = sata_pmp_gscr_ports(new_gscr); + + if (old_vendor != new_vendor) { + ata_dev_info(dev, + "Port Multiplier vendor mismatch '0x%x' != '0x%x'\n", + old_vendor, new_vendor); + return 0; + } + + if (old_devid != new_devid) { + ata_dev_info(dev, + "Port Multiplier device ID mismatch '0x%x' != '0x%x'\n", + old_devid, new_devid); + return 0; + } + + if (old_nr_ports != new_nr_ports) { + ata_dev_info(dev, + "Port Multiplier nr_ports mismatch '0x%x' != '0x%x'\n", + old_nr_ports, new_nr_ports); + return 0; + } + + return 1; +} + +/** + * sata_pmp_revalidate - revalidate SATA PMP + * @dev: PMP device to revalidate + * @new_class: new class code + * + * Re-read GSCR block and make sure @dev is still attached to the + * port and properly configured. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +static int sata_pmp_revalidate(struct ata_device *dev, unsigned int new_class) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + u32 *gscr = (void *)ap->sector_buf; + int rc; + + DPRINTK("ENTER\n"); + + ata_eh_about_to_do(link, NULL, ATA_EH_REVALIDATE); + + if (!ata_dev_enabled(dev)) { + rc = -ENODEV; + goto fail; + } + + /* wrong class? */ + if (ata_class_enabled(new_class) && new_class != ATA_DEV_PMP) { + rc = -ENODEV; + goto fail; + } + + /* read GSCR */ + rc = sata_pmp_read_gscr(dev, gscr); + if (rc) + goto fail; + + /* is the pmp still there? */ + if (!sata_pmp_same_pmp(dev, gscr)) { + rc = -ENODEV; + goto fail; + } + + memcpy(dev->gscr, gscr, sizeof(gscr[0]) * SATA_PMP_GSCR_DWORDS); + + rc = sata_pmp_configure(dev, 0); + if (rc) + goto fail; + + ata_eh_done(link, NULL, ATA_EH_REVALIDATE); + + DPRINTK("EXIT, rc=0\n"); + return 0; + + fail: + ata_dev_err(dev, "PMP revalidation failed (errno=%d)\n", rc); + DPRINTK("EXIT, rc=%d\n", rc); + return rc; +} + +/** + * sata_pmp_revalidate_quick - revalidate SATA PMP quickly + * @dev: PMP device to revalidate + * + * Make sure the attached PMP is accessible. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +static int sata_pmp_revalidate_quick(struct ata_device *dev) +{ + unsigned int err_mask; + u32 prod_id; + + err_mask = sata_pmp_read(dev->link, SATA_PMP_GSCR_PROD_ID, &prod_id); + if (err_mask) { + ata_dev_err(dev, + "failed to read PMP product ID (Emask=0x%x)\n", + err_mask); + return -EIO; + } + + if (prod_id != dev->gscr[SATA_PMP_GSCR_PROD_ID]) { + ata_dev_err(dev, "PMP product ID mismatch\n"); + /* something weird is going on, request full PMP recovery */ + return -EIO; + } + + return 0; +} + +/** + * sata_pmp_eh_recover_pmp - recover PMP + * @ap: ATA port PMP is attached to + * @prereset: prereset method (can be NULL) + * @softreset: softreset method + * @hardreset: hardreset method + * @postreset: postreset method (can be NULL) + * + * Recover PMP attached to @ap. Recovery procedure is somewhat + * similar to that of ata_eh_recover() except that reset should + * always be performed in hard->soft sequence and recovery + * failure results in PMP detachment. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int sata_pmp_eh_recover_pmp(struct ata_port *ap, + ata_prereset_fn_t prereset, ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) +{ + struct ata_link *link = &ap->link; + struct ata_eh_context *ehc = &link->eh_context; + struct ata_device *dev = link->device; + int tries = ATA_EH_PMP_TRIES; + int detach = 0, rc = 0; + int reval_failed = 0; + + DPRINTK("ENTER\n"); + + if (dev->flags & ATA_DFLAG_DETACH) { + detach = 1; + goto fail; + } + + retry: + ehc->classes[0] = ATA_DEV_UNKNOWN; + + if (ehc->i.action & ATA_EH_RESET) { + struct ata_link *tlink; + + /* reset */ + rc = ata_eh_reset(link, 0, prereset, softreset, hardreset, + postreset); + if (rc) { + ata_link_err(link, "failed to reset PMP, giving up\n"); + goto fail; + } + + /* PMP is reset, SErrors cannot be trusted, scan all */ + ata_for_each_link(tlink, ap, EDGE) { + struct ata_eh_context *ehc = &tlink->eh_context; + + ehc->i.probe_mask |= ATA_ALL_DEVICES; + ehc->i.action |= ATA_EH_RESET; + } + } + + /* If revalidation is requested, revalidate and reconfigure; + * otherwise, do quick revalidation. + */ + if (ehc->i.action & ATA_EH_REVALIDATE) + rc = sata_pmp_revalidate(dev, ehc->classes[0]); + else + rc = sata_pmp_revalidate_quick(dev); + + if (rc) { + tries--; + + if (rc == -ENODEV) { + ehc->i.probe_mask |= ATA_ALL_DEVICES; + detach = 1; + /* give it just two more chances */ + tries = min(tries, 2); + } + + if (tries) { + /* consecutive revalidation failures? speed down */ + if (reval_failed) + sata_down_spd_limit(link, 0); + else + reval_failed = 1; + + ehc->i.action |= ATA_EH_RESET; + goto retry; + } else { + ata_dev_err(dev, + "failed to recover PMP after %d tries, giving up\n", + ATA_EH_PMP_TRIES); + goto fail; + } + } + + /* okay, PMP resurrected */ + ehc->i.flags = 0; + + DPRINTK("EXIT, rc=0\n"); + return 0; + + fail: + sata_pmp_detach(dev); + if (detach) + ata_eh_detach_dev(dev); + else + ata_dev_disable(dev); + + DPRINTK("EXIT, rc=%d\n", rc); + return rc; +} + +static int sata_pmp_eh_handle_disabled_links(struct ata_port *ap) +{ + struct ata_link *link; + unsigned long flags; + int rc; + + spin_lock_irqsave(ap->lock, flags); + + ata_for_each_link(link, ap, EDGE) { + if (!(link->flags & ATA_LFLAG_DISABLED)) + continue; + + spin_unlock_irqrestore(ap->lock, flags); + + /* Some PMPs require hardreset sequence to get + * SError.N working. + */ + sata_link_hardreset(link, sata_deb_timing_normal, + ata_deadline(jiffies, ATA_TMOUT_INTERNAL_QUICK), + NULL, NULL); + + /* unconditionally clear SError.N */ + rc = sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG); + if (rc) { + ata_link_err(link, + "failed to clear SError.N (errno=%d)\n", + rc); + return rc; + } + + spin_lock_irqsave(ap->lock, flags); + } + + spin_unlock_irqrestore(ap->lock, flags); + + return 0; +} + +static int sata_pmp_handle_link_fail(struct ata_link *link, int *link_tries) +{ + struct ata_port *ap = link->ap; + unsigned long flags; + + if (link_tries[link->pmp] && --link_tries[link->pmp]) + return 1; + + /* disable this link */ + if (!(link->flags & ATA_LFLAG_DISABLED)) { + ata_link_warn(link, + "failed to recover link after %d tries, disabling\n", + ATA_EH_PMP_LINK_TRIES); + + spin_lock_irqsave(ap->lock, flags); + link->flags |= ATA_LFLAG_DISABLED; + spin_unlock_irqrestore(ap->lock, flags); + } + + ata_dev_disable(link->device); + link->eh_context.i.action = 0; + + return 0; +} + +/** + * sata_pmp_eh_recover - recover PMP-enabled port + * @ap: ATA port to recover + * + * Drive EH recovery operation for PMP enabled port @ap. This + * function recovers host and PMP ports with proper retrials and + * fallbacks. Actual recovery operations are performed using + * ata_eh_recover() and sata_pmp_eh_recover_pmp(). + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int sata_pmp_eh_recover(struct ata_port *ap) +{ + struct ata_port_operations *ops = ap->ops; + int pmp_tries, link_tries[SATA_PMP_MAX_PORTS]; + struct ata_link *pmp_link = &ap->link; + struct ata_device *pmp_dev = pmp_link->device; + struct ata_eh_context *pmp_ehc = &pmp_link->eh_context; + u32 *gscr = pmp_dev->gscr; + struct ata_link *link; + struct ata_device *dev; + unsigned int err_mask; + u32 gscr_error, sntf; + int cnt, rc; + + pmp_tries = ATA_EH_PMP_TRIES; + ata_for_each_link(link, ap, EDGE) + link_tries[link->pmp] = ATA_EH_PMP_LINK_TRIES; + + retry: + /* PMP attached? */ + if (!sata_pmp_attached(ap)) { + rc = ata_eh_recover(ap, ops->prereset, ops->softreset, + ops->hardreset, ops->postreset, NULL); + if (rc) { + ata_for_each_dev(dev, &ap->link, ALL) + ata_dev_disable(dev); + return rc; + } + + if (pmp_dev->class != ATA_DEV_PMP) + return 0; + + /* new PMP online */ + ata_for_each_link(link, ap, EDGE) + link_tries[link->pmp] = ATA_EH_PMP_LINK_TRIES; + + /* fall through */ + } + + /* recover pmp */ + rc = sata_pmp_eh_recover_pmp(ap, ops->prereset, ops->softreset, + ops->hardreset, ops->postreset); + if (rc) + goto pmp_fail; + + /* PHY event notification can disturb reset and other recovery + * operations. Turn it off. + */ + if (gscr[SATA_PMP_GSCR_FEAT_EN] & SATA_PMP_FEAT_NOTIFY) { + gscr[SATA_PMP_GSCR_FEAT_EN] &= ~SATA_PMP_FEAT_NOTIFY; + + err_mask = sata_pmp_write(pmp_link, SATA_PMP_GSCR_FEAT_EN, + gscr[SATA_PMP_GSCR_FEAT_EN]); + if (err_mask) { + ata_link_warn(pmp_link, + "failed to disable NOTIFY (err_mask=0x%x)\n", + err_mask); + goto pmp_fail; + } + } + + /* handle disabled links */ + rc = sata_pmp_eh_handle_disabled_links(ap); + if (rc) + goto pmp_fail; + + /* recover links */ + rc = ata_eh_recover(ap, ops->pmp_prereset, ops->pmp_softreset, + ops->pmp_hardreset, ops->pmp_postreset, &link); + if (rc) + goto link_fail; + + /* clear SNotification */ + rc = sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf); + if (rc == 0) + sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf); + + /* + * If LPM is active on any fan-out port, hotplug wouldn't + * work. Return w/ PHY event notification disabled. + */ + ata_for_each_link(link, ap, EDGE) + if (link->lpm_policy > ATA_LPM_MAX_POWER) + return 0; + + /* + * Connection status might have changed while resetting other + * links, enable notification and check SATA_PMP_GSCR_ERROR + * before returning. + */ + + /* enable notification */ + if (pmp_dev->flags & ATA_DFLAG_AN) { + gscr[SATA_PMP_GSCR_FEAT_EN] |= SATA_PMP_FEAT_NOTIFY; + + err_mask = sata_pmp_write(pmp_link, SATA_PMP_GSCR_FEAT_EN, + gscr[SATA_PMP_GSCR_FEAT_EN]); + if (err_mask) { + ata_dev_err(pmp_dev, + "failed to write PMP_FEAT_EN (Emask=0x%x)\n", + err_mask); + rc = -EIO; + goto pmp_fail; + } + } + + /* check GSCR_ERROR */ + err_mask = sata_pmp_read(pmp_link, SATA_PMP_GSCR_ERROR, &gscr_error); + if (err_mask) { + ata_dev_err(pmp_dev, + "failed to read PMP_GSCR_ERROR (Emask=0x%x)\n", + err_mask); + rc = -EIO; + goto pmp_fail; + } + + cnt = 0; + ata_for_each_link(link, ap, EDGE) { + if (!(gscr_error & (1 << link->pmp))) + continue; + + if (sata_pmp_handle_link_fail(link, link_tries)) { + ata_ehi_hotplugged(&link->eh_context.i); + cnt++; + } else { + ata_link_warn(link, + "PHY status changed but maxed out on retries, giving up\n"); + ata_link_warn(link, + "Manually issue scan to resume this link\n"); + } + } + + if (cnt) { + ata_port_info(ap, + "PMP SError.N set for some ports, repeating recovery\n"); + goto retry; + } + + return 0; + + link_fail: + if (sata_pmp_handle_link_fail(link, link_tries)) { + pmp_ehc->i.action |= ATA_EH_RESET; + goto retry; + } + + /* fall through */ + pmp_fail: + /* Control always ends up here after detaching PMP. Shut up + * and return if we're unloading. + */ + if (ap->pflags & ATA_PFLAG_UNLOADING) + return rc; + + if (!sata_pmp_attached(ap)) + goto retry; + + if (--pmp_tries) { + pmp_ehc->i.action |= ATA_EH_RESET; + goto retry; + } + + ata_port_err(ap, "failed to recover PMP after %d tries, giving up\n", + ATA_EH_PMP_TRIES); + sata_pmp_detach(pmp_dev); + ata_dev_disable(pmp_dev); + + return rc; +} + +/** + * sata_pmp_error_handler - do standard error handling for PMP-enabled host + * @ap: host port to handle error for + * + * Perform standard error handling sequence for PMP-enabled host + * @ap. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void sata_pmp_error_handler(struct ata_port *ap) +{ + ata_eh_autopsy(ap); + ata_eh_report(ap); + sata_pmp_eh_recover(ap); + ata_eh_finish(ap); +} + +EXPORT_SYMBOL_GPL(sata_pmp_port_ops); +EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch); +EXPORT_SYMBOL_GPL(sata_pmp_error_handler); diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c new file mode 100644 index 000000000..ce552038a --- /dev/null +++ b/drivers/ata/libata-scsi.c @@ -0,0 +1,4299 @@ +/* + * libata-scsi.c - helper library for ATA + * + * Maintained by: Tejun Heo + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2004 Red Hat, Inc. All rights reserved. + * Copyright 2003-2004 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from + * - http://www.t10.org/ + * - http://www.t13.org/ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "libata.h" +#include "libata-transport.h" + +#define ATA_SCSI_RBUF_SIZE 4096 + +static DEFINE_SPINLOCK(ata_scsi_rbuf_lock); +static u8 ata_scsi_rbuf[ATA_SCSI_RBUF_SIZE]; + +typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc); + +static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap, + const struct scsi_device *scsidev); +static struct ata_device *ata_scsi_find_dev(struct ata_port *ap, + const struct scsi_device *scsidev); + +#define RW_RECOVERY_MPAGE 0x1 +#define RW_RECOVERY_MPAGE_LEN 12 +#define CACHE_MPAGE 0x8 +#define CACHE_MPAGE_LEN 20 +#define CONTROL_MPAGE 0xa +#define CONTROL_MPAGE_LEN 12 +#define ALL_MPAGES 0x3f +#define ALL_SUB_MPAGES 0xff + + +static const u8 def_rw_recovery_mpage[RW_RECOVERY_MPAGE_LEN] = { + RW_RECOVERY_MPAGE, + RW_RECOVERY_MPAGE_LEN - 2, + (1 << 7), /* AWRE */ + 0, /* read retry count */ + 0, 0, 0, 0, + 0, /* write retry count */ + 0, 0, 0 +}; + +static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = { + CACHE_MPAGE, + CACHE_MPAGE_LEN - 2, + 0, /* contains WCE, needs to be 0 for logic */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, /* contains DRA, needs to be 0 for logic */ + 0, 0, 0, 0, 0, 0, 0 +}; + +static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = { + CONTROL_MPAGE, + CONTROL_MPAGE_LEN - 2, + 2, /* DSENSE=0, GLTSD=1 */ + 0, /* [QAM+QERR may be 1, see 05-359r1] */ + 0, 0, 0, 0, 0xff, 0xff, + 0, 30 /* extended self test time, see 05-359r1 */ +}; + +static const char *ata_lpm_policy_names[] = { + [ATA_LPM_UNKNOWN] = "max_performance", + [ATA_LPM_MAX_POWER] = "max_performance", + [ATA_LPM_FIRMWARE_DEFAULTS] = "firmware_defaults", + [ATA_LPM_MED_POWER] = "medium_power", + [ATA_LPM_MIN_POWER] = "min_power", +}; + +static ssize_t ata_scsi_lpm_store(struct device *device, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(device); + struct ata_port *ap = ata_shost_to_port(shost); + struct ata_link *link; + struct ata_device *dev; + enum ata_lpm_policy policy; + unsigned long flags; + + /* UNKNOWN is internal state, iterate from MAX_POWER */ + for (policy = ATA_LPM_MAX_POWER; + policy < ARRAY_SIZE(ata_lpm_policy_names); policy++) { + const char *name = ata_lpm_policy_names[policy]; + + if (strncmp(name, buf, strlen(name)) == 0) + break; + } + if (policy == ARRAY_SIZE(ata_lpm_policy_names)) + return -EINVAL; + + spin_lock_irqsave(ap->lock, flags); + + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, &ap->link, ENABLED) { + if (dev->horkage & ATA_HORKAGE_NOLPM) { + count = -EOPNOTSUPP; + goto out_unlock; + } + } + } + + ap->target_lpm_policy = policy; + ata_port_schedule_eh(ap); +out_unlock: + spin_unlock_irqrestore(ap->lock, flags); + return count; +} + +static ssize_t ata_scsi_lpm_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + + if (ap->target_lpm_policy >= ARRAY_SIZE(ata_lpm_policy_names)) + return -EINVAL; + + return snprintf(buf, PAGE_SIZE, "%s\n", + ata_lpm_policy_names[ap->target_lpm_policy]); +} +DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR, + ata_scsi_lpm_show, ata_scsi_lpm_store); +EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy); + +static ssize_t ata_scsi_park_show(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct scsi_device *sdev = to_scsi_device(device); + struct ata_port *ap; + struct ata_link *link; + struct ata_device *dev; + unsigned long flags, now; + unsigned int uninitialized_var(msecs); + int rc = 0; + + ap = ata_shost_to_port(sdev->host); + + spin_lock_irqsave(ap->lock, flags); + dev = ata_scsi_find_dev(ap, sdev); + if (!dev) { + rc = -ENODEV; + goto unlock; + } + if (dev->flags & ATA_DFLAG_NO_UNLOAD) { + rc = -EOPNOTSUPP; + goto unlock; + } + + link = dev->link; + now = jiffies; + if (ap->pflags & ATA_PFLAG_EH_IN_PROGRESS && + link->eh_context.unloaded_mask & (1 << dev->devno) && + time_after(dev->unpark_deadline, now)) + msecs = jiffies_to_msecs(dev->unpark_deadline - now); + else + msecs = 0; + +unlock: + spin_unlock_irq(ap->lock); + + return rc ? rc : snprintf(buf, 20, "%u\n", msecs); +} + +static ssize_t ata_scsi_park_store(struct device *device, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct scsi_device *sdev = to_scsi_device(device); + struct ata_port *ap; + struct ata_device *dev; + long int input; + unsigned long flags; + int rc; + + rc = kstrtol(buf, 10, &input); + if (rc) + return rc; + if (input < -2) + return -EINVAL; + if (input > ATA_TMOUT_MAX_PARK) { + rc = -EOVERFLOW; + input = ATA_TMOUT_MAX_PARK; + } + + ap = ata_shost_to_port(sdev->host); + + spin_lock_irqsave(ap->lock, flags); + dev = ata_scsi_find_dev(ap, sdev); + if (unlikely(!dev)) { + rc = -ENODEV; + goto unlock; + } + if (dev->class != ATA_DEV_ATA && + dev->class != ATA_DEV_ZAC) { + rc = -EOPNOTSUPP; + goto unlock; + } + + if (input >= 0) { + if (dev->flags & ATA_DFLAG_NO_UNLOAD) { + rc = -EOPNOTSUPP; + goto unlock; + } + + dev->unpark_deadline = ata_deadline(jiffies, input); + dev->link->eh_info.dev_action[dev->devno] |= ATA_EH_PARK; + ata_port_schedule_eh(ap); + complete(&ap->park_req_pending); + } else { + switch (input) { + case -1: + dev->flags &= ~ATA_DFLAG_NO_UNLOAD; + break; + case -2: + dev->flags |= ATA_DFLAG_NO_UNLOAD; + break; + } + } +unlock: + spin_unlock_irqrestore(ap->lock, flags); + + return rc ? rc : len; +} +DEVICE_ATTR(unload_heads, S_IRUGO | S_IWUSR, + ata_scsi_park_show, ata_scsi_park_store); +EXPORT_SYMBOL_GPL(dev_attr_unload_heads); + +void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) +{ + if (!cmd) + return; + + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq); +} + +void ata_scsi_set_sense_information(struct scsi_cmnd *cmd, + const struct ata_taskfile *tf) +{ + u64 information; + + if (!cmd) + return; + + information = ata_tf_read_block(tf, NULL); + scsi_set_sense_information(cmd->sense_buffer, information); +} + +static ssize_t +ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + if (ap->ops->em_store && (ap->flags & ATA_FLAG_EM)) + return ap->ops->em_store(ap, buf, count); + return -EINVAL; +} + +static ssize_t +ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + + if (ap->ops->em_show && (ap->flags & ATA_FLAG_EM)) + return ap->ops->em_show(ap, buf); + return -EINVAL; +} +DEVICE_ATTR(em_message, S_IRUGO | S_IWUSR, + ata_scsi_em_message_show, ata_scsi_em_message_store); +EXPORT_SYMBOL_GPL(dev_attr_em_message); + +static ssize_t +ata_scsi_em_message_type_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + + return snprintf(buf, 23, "%d\n", ap->em_message_type); +} +DEVICE_ATTR(em_message_type, S_IRUGO, + ata_scsi_em_message_type_show, NULL); +EXPORT_SYMBOL_GPL(dev_attr_em_message_type); + +static ssize_t +ata_scsi_activity_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *atadev = ata_scsi_find_dev(ap, sdev); + + if (atadev && ap->ops->sw_activity_show && + (ap->flags & ATA_FLAG_SW_ACTIVITY)) + return ap->ops->sw_activity_show(atadev, buf); + return -EINVAL; +} + +static ssize_t +ata_scsi_activity_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *atadev = ata_scsi_find_dev(ap, sdev); + enum sw_activity val; + int rc; + + if (atadev && ap->ops->sw_activity_store && + (ap->flags & ATA_FLAG_SW_ACTIVITY)) { + val = simple_strtoul(buf, NULL, 0); + switch (val) { + case OFF: case BLINK_ON: case BLINK_OFF: + rc = ap->ops->sw_activity_store(atadev, val); + if (!rc) + return count; + else + return rc; + } + } + return -EINVAL; +} +DEVICE_ATTR(sw_activity, S_IWUSR | S_IRUGO, ata_scsi_activity_show, + ata_scsi_activity_store); +EXPORT_SYMBOL_GPL(dev_attr_sw_activity); + +struct device_attribute *ata_common_sdev_attrs[] = { + &dev_attr_unload_heads, + NULL +}; +EXPORT_SYMBOL_GPL(ata_common_sdev_attrs); + +static void ata_scsi_invalid_field(struct scsi_cmnd *cmd) +{ + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + cmd->scsi_done(cmd); +} + +/** + * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd. + * @sdev: SCSI device for which BIOS geometry is to be determined + * @bdev: block device associated with @sdev + * @capacity: capacity of SCSI device + * @geom: location to which geometry will be output + * + * Generic bios head/sector/cylinder calculator + * used by sd. Most BIOSes nowadays expect a XXX/255/16 (CHS) + * mapping. Some situations may arise where the disk is not + * bootable if this is not used. + * + * LOCKING: + * Defined by the SCSI layer. We don't really care. + * + * RETURNS: + * Zero. + */ +int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, + sector_t capacity, int geom[]) +{ + geom[0] = 255; + geom[1] = 63; + sector_div(capacity, 255*63); + geom[2] = capacity; + + return 0; +} + +/** + * ata_scsi_unlock_native_capacity - unlock native capacity + * @sdev: SCSI device to adjust device capacity for + * + * This function is called if a partition on @sdev extends beyond + * the end of the device. It requests EH to unlock HPA. + * + * LOCKING: + * Defined by the SCSI layer. Might sleep. + */ +void ata_scsi_unlock_native_capacity(struct scsi_device *sdev) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev; + unsigned long flags; + + spin_lock_irqsave(ap->lock, flags); + + dev = ata_scsi_find_dev(ap, sdev); + if (dev && dev->n_sectors < dev->n_native_sectors) { + dev->flags |= ATA_DFLAG_UNLOCK_HPA; + dev->link->eh_info.action |= ATA_EH_RESET; + ata_port_schedule_eh(ap); + } + + spin_unlock_irqrestore(ap->lock, flags); + ata_port_wait_eh(ap); +} + +/** + * ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl + * @ap: target port + * @sdev: SCSI device to get identify data for + * @arg: User buffer area for identify data + * + * LOCKING: + * Defined by the SCSI layer. We don't really care. + * + * RETURNS: + * Zero on success, negative errno on error. + */ +static int ata_get_identity(struct ata_port *ap, struct scsi_device *sdev, + void __user *arg) +{ + struct ata_device *dev = ata_scsi_find_dev(ap, sdev); + u16 __user *dst = arg; + char buf[40]; + + if (!dev) + return -ENOMSG; + + if (copy_to_user(dst, dev->id, ATA_ID_WORDS * sizeof(u16))) + return -EFAULT; + + ata_id_string(dev->id, buf, ATA_ID_PROD, ATA_ID_PROD_LEN); + if (copy_to_user(dst + ATA_ID_PROD, buf, ATA_ID_PROD_LEN)) + return -EFAULT; + + ata_id_string(dev->id, buf, ATA_ID_FW_REV, ATA_ID_FW_REV_LEN); + if (copy_to_user(dst + ATA_ID_FW_REV, buf, ATA_ID_FW_REV_LEN)) + return -EFAULT; + + ata_id_string(dev->id, buf, ATA_ID_SERNO, ATA_ID_SERNO_LEN); + if (copy_to_user(dst + ATA_ID_SERNO, buf, ATA_ID_SERNO_LEN)) + return -EFAULT; + + return 0; +} + +/** + * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl + * @scsidev: Device to which we are issuing command + * @arg: User provided data for issuing command + * + * LOCKING: + * Defined by the SCSI layer. We don't really care. + * + * RETURNS: + * Zero on success, negative errno on error. + */ +int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) +{ + int rc = 0; + u8 scsi_cmd[MAX_COMMAND_SIZE]; + u8 args[4], *argbuf = NULL, *sensebuf = NULL; + int argsize = 0; + enum dma_data_direction data_dir; + int cmd_result; + + if (arg == NULL) + return -EINVAL; + + if (copy_from_user(args, arg, sizeof(args))) + return -EFAULT; + + sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO); + if (!sensebuf) + return -ENOMEM; + + memset(scsi_cmd, 0, sizeof(scsi_cmd)); + + if (args[3]) { + argsize = ATA_SECT_SIZE * args[3]; + argbuf = kmalloc(argsize, GFP_KERNEL); + if (argbuf == NULL) { + rc = -ENOMEM; + goto error; + } + + scsi_cmd[1] = (4 << 1); /* PIO Data-in */ + scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev, + block count in sector count field */ + data_dir = DMA_FROM_DEVICE; + } else { + scsi_cmd[1] = (3 << 1); /* Non-data */ + scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */ + data_dir = DMA_NONE; + } + + scsi_cmd[0] = ATA_16; + + scsi_cmd[4] = args[2]; + if (args[0] == ATA_CMD_SMART) { /* hack -- ide driver does this too */ + scsi_cmd[6] = args[3]; + scsi_cmd[8] = args[1]; + scsi_cmd[10] = 0x4f; + scsi_cmd[12] = 0xc2; + } else { + scsi_cmd[6] = args[1]; + } + scsi_cmd[14] = args[0]; + + /* Good values for timeout and retries? Values below + from scsi_ioctl_send_command() for default case... */ + cmd_result = scsi_execute(scsidev, scsi_cmd, data_dir, argbuf, argsize, + sensebuf, (10*HZ), 5, 0, NULL); + + if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */ + u8 *desc = sensebuf + 8; + cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */ + + /* If we set cc then ATA pass-through will cause a + * check condition even if no error. Filter that. */ + if (cmd_result & SAM_STAT_CHECK_CONDITION) { + struct scsi_sense_hdr sshdr; + scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, + &sshdr); + if (sshdr.sense_key == RECOVERED_ERROR && + sshdr.asc == 0 && sshdr.ascq == 0x1d) + cmd_result &= ~SAM_STAT_CHECK_CONDITION; + } + + /* Send userspace a few ATA registers (same as drivers/ide) */ + if (sensebuf[0] == 0x72 && /* format is "descriptor" */ + desc[0] == 0x09) { /* code is "ATA Descriptor" */ + args[0] = desc[13]; /* status */ + args[1] = desc[3]; /* error */ + args[2] = desc[5]; /* sector count (0:7) */ + if (copy_to_user(arg, args, sizeof(args))) + rc = -EFAULT; + } + } + + + if (cmd_result) { + rc = -EIO; + goto error; + } + + if ((argbuf) + && copy_to_user(arg + sizeof(args), argbuf, argsize)) + rc = -EFAULT; +error: + kfree(sensebuf); + kfree(argbuf); + return rc; +} + +/** + * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl + * @scsidev: Device to which we are issuing command + * @arg: User provided data for issuing command + * + * LOCKING: + * Defined by the SCSI layer. We don't really care. + * + * RETURNS: + * Zero on success, negative errno on error. + */ +int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) +{ + int rc = 0; + u8 scsi_cmd[MAX_COMMAND_SIZE]; + u8 args[7], *sensebuf = NULL; + int cmd_result; + + if (arg == NULL) + return -EINVAL; + + if (copy_from_user(args, arg, sizeof(args))) + return -EFAULT; + + sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO); + if (!sensebuf) + return -ENOMEM; + + memset(scsi_cmd, 0, sizeof(scsi_cmd)); + scsi_cmd[0] = ATA_16; + scsi_cmd[1] = (3 << 1); /* Non-data */ + scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */ + scsi_cmd[4] = args[1]; + scsi_cmd[6] = args[2]; + scsi_cmd[8] = args[3]; + scsi_cmd[10] = args[4]; + scsi_cmd[12] = args[5]; + scsi_cmd[13] = args[6] & 0x4f; + scsi_cmd[14] = args[0]; + + /* Good values for timeout and retries? Values below + from scsi_ioctl_send_command() for default case... */ + cmd_result = scsi_execute(scsidev, scsi_cmd, DMA_NONE, NULL, 0, + sensebuf, (10*HZ), 5, 0, NULL); + + if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */ + u8 *desc = sensebuf + 8; + cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */ + + /* If we set cc then ATA pass-through will cause a + * check condition even if no error. Filter that. */ + if (cmd_result & SAM_STAT_CHECK_CONDITION) { + struct scsi_sense_hdr sshdr; + scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, + &sshdr); + if (sshdr.sense_key == RECOVERED_ERROR && + sshdr.asc == 0 && sshdr.ascq == 0x1d) + cmd_result &= ~SAM_STAT_CHECK_CONDITION; + } + + /* Send userspace ATA registers */ + if (sensebuf[0] == 0x72 && /* format is "descriptor" */ + desc[0] == 0x09) {/* code is "ATA Descriptor" */ + args[0] = desc[13]; /* status */ + args[1] = desc[3]; /* error */ + args[2] = desc[5]; /* sector count (0:7) */ + args[3] = desc[7]; /* lbal */ + args[4] = desc[9]; /* lbam */ + args[5] = desc[11]; /* lbah */ + args[6] = desc[12]; /* select */ + if (copy_to_user(arg, args, sizeof(args))) + rc = -EFAULT; + } + } + + if (cmd_result) { + rc = -EIO; + goto error; + } + + error: + kfree(sensebuf); + return rc; +} + +static int ata_ioc32(struct ata_port *ap) +{ + if (ap->flags & ATA_FLAG_PIO_DMA) + return 1; + if (ap->pflags & ATA_PFLAG_PIO32) + return 1; + return 0; +} + +int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev, + int cmd, void __user *arg) +{ + int val = -EINVAL, rc = -EINVAL; + unsigned long flags; + + switch (cmd) { + case ATA_IOC_GET_IO32: + spin_lock_irqsave(ap->lock, flags); + val = ata_ioc32(ap); + spin_unlock_irqrestore(ap->lock, flags); + if (copy_to_user(arg, &val, 1)) + return -EFAULT; + return 0; + + case ATA_IOC_SET_IO32: + val = (unsigned long) arg; + rc = 0; + spin_lock_irqsave(ap->lock, flags); + if (ap->pflags & ATA_PFLAG_PIO32CHANGE) { + if (val) + ap->pflags |= ATA_PFLAG_PIO32; + else + ap->pflags &= ~ATA_PFLAG_PIO32; + } else { + if (val != ata_ioc32(ap)) + rc = -EINVAL; + } + spin_unlock_irqrestore(ap->lock, flags); + return rc; + + case HDIO_GET_IDENTITY: + return ata_get_identity(ap, scsidev, arg); + + case HDIO_DRIVE_CMD: + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) + return -EACCES; + return ata_cmd_ioctl(scsidev, arg); + + case HDIO_DRIVE_TASK: + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) + return -EACCES; + return ata_task_ioctl(scsidev, arg); + + default: + rc = -ENOTTY; + break; + } + + return rc; +} +EXPORT_SYMBOL_GPL(ata_sas_scsi_ioctl); + +int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) +{ + return ata_sas_scsi_ioctl(ata_shost_to_port(scsidev->host), + scsidev, cmd, arg); +} +EXPORT_SYMBOL_GPL(ata_scsi_ioctl); + +/** + * ata_scsi_qc_new - acquire new ata_queued_cmd reference + * @dev: ATA device to which the new command is attached + * @cmd: SCSI command that originated this ATA command + * + * Obtain a reference to an unused ata_queued_cmd structure, + * which is the basic libata structure representing a single + * ATA command sent to the hardware. + * + * If a command was available, fill in the SCSI-specific + * portions of the structure with information on the + * current command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Command allocated, or %NULL if none available. + */ +static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, + struct scsi_cmnd *cmd) +{ + struct ata_queued_cmd *qc; + + qc = ata_qc_new_init(dev, cmd->request->tag); + if (qc) { + qc->scsicmd = cmd; + qc->scsidone = cmd->scsi_done; + + qc->sg = scsi_sglist(cmd); + qc->n_elem = scsi_sg_count(cmd); + } else { + cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1); + cmd->scsi_done(cmd); + } + + return qc; +} + +static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + + qc->extrabytes = scmd->request->extra_len; + qc->nbytes = scsi_bufflen(scmd) + qc->extrabytes; +} + +/** + * ata_dump_status - user friendly display of error info + * @id: id of the port in question + * @tf: ptr to filled out taskfile + * + * Decode and dump the ATA error/status registers for the user so + * that they have some idea what really happened at the non + * make-believe layer. + * + * LOCKING: + * inherited from caller + */ +static void ata_dump_status(unsigned id, struct ata_taskfile *tf) +{ + u8 stat = tf->command, err = tf->feature; + + printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat); + if (stat & ATA_BUSY) { + printk("Busy }\n"); /* Data is not valid in this case */ + } else { + if (stat & ATA_DRDY) printk("DriveReady "); + if (stat & ATA_DF) printk("DeviceFault "); + if (stat & ATA_DSC) printk("SeekComplete "); + if (stat & ATA_DRQ) printk("DataRequest "); + if (stat & ATA_CORR) printk("CorrectedError "); + if (stat & ATA_SENSE) printk("Sense "); + if (stat & ATA_ERR) printk("Error "); + printk("}\n"); + + if (err) { + printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err); + if (err & ATA_ABORTED) printk("DriveStatusError "); + if (err & ATA_ICRC) { + if (err & ATA_ABORTED) + printk("BadCRC "); + else printk("Sector "); + } + if (err & ATA_UNC) printk("UncorrectableError "); + if (err & ATA_IDNF) printk("SectorIdNotFound "); + if (err & ATA_TRK0NF) printk("TrackZeroNotFound "); + if (err & ATA_AMNF) printk("AddrMarkNotFound "); + printk("}\n"); + } + } +} + +/** + * ata_to_sense_error - convert ATA error to SCSI error + * @id: ATA device number + * @drv_stat: value contained in ATA status register + * @drv_err: value contained in ATA error register + * @sk: the sense key we'll fill out + * @asc: the additional sense code we'll fill out + * @ascq: the additional sense code qualifier we'll fill out + * @verbose: be verbose + * + * Converts an ATA error into a SCSI error. Fill out pointers to + * SK, ASC, and ASCQ bytes for later use in fixed or descriptor + * format sense blocks. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, + u8 *asc, u8 *ascq, int verbose) +{ + int i; + + /* Based on the 3ware driver translation table */ + static const unsigned char sense_table[][4] = { + /* BBD|ECC|ID|MAR */ + {0xd1, ABORTED_COMMAND, 0x00, 0x00}, + // Device busy Aborted command + /* BBD|ECC|ID */ + {0xd0, ABORTED_COMMAND, 0x00, 0x00}, + // Device busy Aborted command + /* ECC|MC|MARK */ + {0x61, HARDWARE_ERROR, 0x00, 0x00}, + // Device fault Hardware error + /* ICRC|ABRT */ /* NB: ICRC & !ABRT is BBD */ + {0x84, ABORTED_COMMAND, 0x47, 0x00}, + // Data CRC error SCSI parity error + /* MC|ID|ABRT|TRK0|MARK */ + {0x37, NOT_READY, 0x04, 0x00}, + // Unit offline Not ready + /* MCR|MARK */ + {0x09, NOT_READY, 0x04, 0x00}, + // Unrecovered disk error Not ready + /* Bad address mark */ + {0x01, MEDIUM_ERROR, 0x13, 0x00}, + // Address mark not found for data field + /* TRK0 - Track 0 not found */ + {0x02, HARDWARE_ERROR, 0x00, 0x00}, + // Hardware error + /* Abort: 0x04 is not translated here, see below */ + /* Media change request */ + {0x08, NOT_READY, 0x04, 0x00}, + // FIXME: faking offline + /* SRV/IDNF - ID not found */ + {0x10, ILLEGAL_REQUEST, 0x21, 0x00}, + // Logical address out of range + /* MC - Media Changed */ + {0x20, UNIT_ATTENTION, 0x28, 0x00}, + // Not ready to ready change, medium may have changed + /* ECC - Uncorrectable ECC error */ + {0x40, MEDIUM_ERROR, 0x11, 0x04}, + // Unrecovered read error + /* BBD - block marked bad */ + {0x80, MEDIUM_ERROR, 0x11, 0x04}, + // Block marked bad Medium error, unrecovered read error + {0xFF, 0xFF, 0xFF, 0xFF}, // END mark + }; + static const unsigned char stat_table[][4] = { + /* Must be first because BUSY means no other bits valid */ + {0x80, ABORTED_COMMAND, 0x47, 0x00}, + // Busy, fake parity for now + {0x40, ILLEGAL_REQUEST, 0x21, 0x04}, + // Device ready, unaligned write command + {0x20, HARDWARE_ERROR, 0x44, 0x00}, + // Device fault, internal target failure + {0x08, ABORTED_COMMAND, 0x47, 0x00}, + // Timed out in xfer, fake parity for now + {0x04, RECOVERED_ERROR, 0x11, 0x00}, + // Recovered ECC error Medium error, recovered + {0xFF, 0xFF, 0xFF, 0xFF}, // END mark + }; + + /* + * Is this an error we can process/parse + */ + if (drv_stat & ATA_BUSY) { + drv_err = 0; /* Ignore the err bits, they're invalid */ + } + + if (drv_err) { + /* Look for drv_err */ + for (i = 0; sense_table[i][0] != 0xFF; i++) { + /* Look for best matches first */ + if ((sense_table[i][0] & drv_err) == + sense_table[i][0]) { + *sk = sense_table[i][1]; + *asc = sense_table[i][2]; + *ascq = sense_table[i][3]; + goto translate_done; + } + } + } + + /* + * Fall back to interpreting status bits. Note that if the drv_err + * has only the ABRT bit set, we decode drv_stat. ABRT by itself + * is not descriptive enough. + */ + for (i = 0; stat_table[i][0] != 0xFF; i++) { + if (stat_table[i][0] & drv_stat) { + *sk = stat_table[i][1]; + *asc = stat_table[i][2]; + *ascq = stat_table[i][3]; + goto translate_done; + } + } + + /* + * We need a sensible error return here, which is tricky, and one + * that won't cause people to do things like return a disk wrongly. + */ + *sk = ABORTED_COMMAND; + *asc = 0x00; + *ascq = 0x00; + + translate_done: + if (verbose) + printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x " + "to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", + id, drv_stat, drv_err, *sk, *asc, *ascq); + return; +} + +/* + * ata_gen_passthru_sense - Generate check condition sense block. + * @qc: Command that completed. + * + * This function is specific to the ATA descriptor format sense + * block specified for the ATA pass through commands. Regardless + * of whether the command errored or not, return a sense + * block. Copy all controller registers into the sense + * block. If there was no error, we get the request from an ATA + * passthrough command, so we use the following sense data: + * sk = RECOVERED ERROR + * asc,ascq = ATA PASS-THROUGH INFORMATION AVAILABLE + * + * + * LOCKING: + * None. + */ +static void ata_gen_passthru_sense(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_taskfile *tf = &qc->result_tf; + unsigned char *sb = cmd->sense_buffer; + unsigned char *desc = sb + 8; + int verbose = qc->ap->ops->error_handler == NULL; + + memset(sb, 0, SCSI_SENSE_BUFFERSIZE); + + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + /* + * Use ata_to_sense_error() to map status register bits + * onto sense key, asc & ascq. + */ + if (qc->err_mask || + tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { + ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature, + &sb[1], &sb[2], &sb[3], verbose); + sb[1] &= 0x0f; + } else { + sb[1] = RECOVERED_ERROR; + sb[2] = 0; + sb[3] = 0x1D; + } + + /* + * Sense data is current and format is descriptor. + */ + sb[0] = 0x72; + + desc[0] = 0x09; + + /* set length of additional sense data */ + sb[7] = 14; + desc[1] = 12; + + /* + * Copy registers into sense buffer. + */ + desc[2] = 0x00; + desc[3] = tf->feature; /* == error reg */ + desc[5] = tf->nsect; + desc[7] = tf->lbal; + desc[9] = tf->lbam; + desc[11] = tf->lbah; + desc[12] = tf->device; + desc[13] = tf->command; /* == status reg */ + + /* + * Fill in Extend bit, and the high order bytes + * if applicable. + */ + if (tf->flags & ATA_TFLAG_LBA48) { + desc[2] |= 0x01; + desc[4] = tf->hob_nsect; + desc[6] = tf->hob_lbal; + desc[8] = tf->hob_lbam; + desc[10] = tf->hob_lbah; + } +} + +/** + * ata_gen_ata_sense - generate a SCSI fixed sense block + * @qc: Command that we are erroring out + * + * Generate sense block for a failed ATA command @qc. Descriptor + * format is used to accommodate LBA48 block address. + * + * LOCKING: + * None. + */ +static void ata_gen_ata_sense(struct ata_queued_cmd *qc) +{ + struct ata_device *dev = qc->dev; + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_taskfile *tf = &qc->result_tf; + unsigned char *sb = cmd->sense_buffer; + unsigned char *desc = sb + 8; + int verbose = qc->ap->ops->error_handler == NULL; + u64 block; + + memset(sb, 0, SCSI_SENSE_BUFFERSIZE); + + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + /* sense data is current and format is descriptor */ + sb[0] = 0x72; + + /* Use ata_to_sense_error() to map status register bits + * onto sense key, asc & ascq. + */ + if (qc->err_mask || + tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { + ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature, + &sb[1], &sb[2], &sb[3], verbose); + sb[1] &= 0x0f; + } + + block = ata_tf_read_block(&qc->result_tf, dev); + + /* information sense data descriptor */ + sb[7] = 12; + desc[0] = 0x00; + desc[1] = 10; + + desc[2] |= 0x80; /* valid */ + desc[6] = block >> 40; + desc[7] = block >> 32; + desc[8] = block >> 24; + desc[9] = block >> 16; + desc[10] = block >> 8; + desc[11] = block; +} + +static void ata_scsi_sdev_config(struct scsi_device *sdev) +{ + sdev->use_10_for_rw = 1; + sdev->use_10_for_ms = 1; + sdev->no_report_opcodes = 1; + sdev->no_write_same = 1; + + /* Schedule policy is determined by ->qc_defer() callback and + * it needs to see every deferred qc. Set dev_blocked to 1 to + * prevent SCSI midlayer from automatically deferring + * requests. + */ + sdev->max_device_blocked = 1; +} + +/** + * atapi_drain_needed - Check whether data transfer may overflow + * @rq: request to be checked + * + * ATAPI commands which transfer variable length data to host + * might overflow due to application error or hardare bug. This + * function checks whether overflow should be drained and ignored + * for @request. + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if ; otherwise, 0. + */ +static int atapi_drain_needed(struct request *rq) +{ + if (likely(rq->cmd_type != REQ_TYPE_BLOCK_PC)) + return 0; + + if (!blk_rq_bytes(rq) || (rq->cmd_flags & REQ_WRITE)) + return 0; + + return atapi_cmd_type(rq->cmd[0]) == ATAPI_MISC; +} + +static int ata_scsi_dev_config(struct scsi_device *sdev, + struct ata_device *dev) +{ + struct request_queue *q = sdev->request_queue; + + if (!ata_id_has_unload(dev->id)) + dev->flags |= ATA_DFLAG_NO_UNLOAD; + + /* configure max sectors */ + blk_queue_max_hw_sectors(q, dev->max_sectors); + + if (dev->class == ATA_DEV_ATAPI) { + void *buf; + + sdev->sector_size = ATA_SECT_SIZE; + + /* set DMA padding */ + blk_queue_update_dma_pad(q, ATA_DMA_PAD_SZ - 1); + + /* configure draining */ + buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL); + if (!buf) { + ata_dev_err(dev, "drain buffer allocation failed\n"); + return -ENOMEM; + } + + blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN); + } else { + sdev->sector_size = ata_id_logical_sector_size(dev->id); + sdev->manage_start_stop = 1; + } + + /* + * ata_pio_sectors() expects buffer for each sector to not cross + * page boundary. Enforce it by requiring buffers to be sector + * aligned, which works iff sector_size is not larger than + * PAGE_SIZE. ATAPI devices also need the alignment as + * IDENTIFY_PACKET is executed as ATA_PROT_PIO. + */ + if (sdev->sector_size > PAGE_SIZE) + ata_dev_warn(dev, + "sector_size=%u > PAGE_SIZE, PIO may malfunction\n", + sdev->sector_size); + + blk_queue_update_dma_alignment(q, sdev->sector_size - 1); + + if (dev->flags & ATA_DFLAG_AN) + set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events); + + if (dev->flags & ATA_DFLAG_NCQ) { + int depth; + + depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); + depth = min(ATA_MAX_QUEUE - 1, depth); + scsi_change_queue_depth(sdev, depth); + } + + blk_queue_flush_queueable(q, false); + + dev->sdev = sdev; + return 0; +} + +/** + * ata_scsi_slave_config - Set SCSI device attributes + * @sdev: SCSI device to examine + * + * This is called before we actually start reading + * and writing to the device, to configure certain + * SCSI mid-layer behaviors. + * + * LOCKING: + * Defined by SCSI layer. We don't really care. + */ + +int ata_scsi_slave_config(struct scsi_device *sdev) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); + int rc = 0; + + ata_scsi_sdev_config(sdev); + + if (dev) + rc = ata_scsi_dev_config(sdev, dev); + + return rc; +} + +/** + * ata_scsi_slave_destroy - SCSI device is about to be destroyed + * @sdev: SCSI device to be destroyed + * + * @sdev is about to be destroyed for hot/warm unplugging. If + * this unplugging was initiated by libata as indicated by NULL + * dev->sdev, this function doesn't have to do anything. + * Otherwise, SCSI layer initiated warm-unplug is in progress. + * Clear dev->sdev, schedule the device for ATA detach and invoke + * EH. + * + * LOCKING: + * Defined by SCSI layer. We don't really care. + */ +void ata_scsi_slave_destroy(struct scsi_device *sdev) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct request_queue *q = sdev->request_queue; + unsigned long flags; + struct ata_device *dev; + + if (!ap->ops->error_handler) + return; + + spin_lock_irqsave(ap->lock, flags); + dev = __ata_scsi_find_dev(ap, sdev); + if (dev && dev->sdev) { + /* SCSI device already in CANCEL state, no need to offline it */ + dev->sdev = NULL; + dev->flags |= ATA_DFLAG_DETACH; + ata_port_schedule_eh(ap); + } + spin_unlock_irqrestore(ap->lock, flags); + + kfree(q->dma_drain_buffer); + q->dma_drain_buffer = NULL; + q->dma_drain_size = 0; +} + +/** + * __ata_change_queue_depth - helper for ata_scsi_change_queue_depth + * @ap: ATA port to which the device change the queue depth + * @sdev: SCSI device to configure queue depth for + * @queue_depth: new queue depth + * + * libsas and libata have different approaches for associating a sdev to + * its ata_port. + * + */ +int __ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev, + int queue_depth) +{ + struct ata_device *dev; + unsigned long flags; + + if (queue_depth < 1 || queue_depth == sdev->queue_depth) + return sdev->queue_depth; + + dev = ata_scsi_find_dev(ap, sdev); + if (!dev || !ata_dev_enabled(dev)) + return sdev->queue_depth; + + /* NCQ enabled? */ + spin_lock_irqsave(ap->lock, flags); + dev->flags &= ~ATA_DFLAG_NCQ_OFF; + if (queue_depth == 1 || !ata_ncq_enabled(dev)) { + dev->flags |= ATA_DFLAG_NCQ_OFF; + queue_depth = 1; + } + spin_unlock_irqrestore(ap->lock, flags); + + /* limit and apply queue depth */ + queue_depth = min(queue_depth, sdev->host->can_queue); + queue_depth = min(queue_depth, ata_id_queue_depth(dev->id)); + queue_depth = min(queue_depth, ATA_MAX_QUEUE - 1); + + if (sdev->queue_depth == queue_depth) + return -EINVAL; + + return scsi_change_queue_depth(sdev, queue_depth); +} + +/** + * ata_scsi_change_queue_depth - SCSI callback for queue depth config + * @sdev: SCSI device to configure queue depth for + * @queue_depth: new queue depth + * + * This is libata standard hostt->change_queue_depth callback. + * SCSI will call into this callback when user tries to set queue + * depth via sysfs. + * + * LOCKING: + * SCSI layer (we don't care) + * + * RETURNS: + * Newly configured queue depth. + */ +int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + + return __ata_change_queue_depth(ap, sdev, queue_depth); +} + +/** + * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command + * @qc: Storage for translated ATA taskfile + * + * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY + * (to start). Perhaps these commands should be preceded by + * CHECK POWER MODE to see what power mode the device is already in. + * [See SAT revision 5 at www.t10.org] + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Zero on success, non-zero on error. + */ +static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + struct ata_taskfile *tf = &qc->tf; + const u8 *cdb = scmd->cmnd; + + if (scmd->cmd_len < 5) + goto invalid_fld; + + tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + tf->protocol = ATA_PROT_NODATA; + if (cdb[1] & 0x1) { + ; /* ignore IMMED bit, violates sat-r05 */ + } + if (cdb[4] & 0x2) + goto invalid_fld; /* LOEJ bit set not supported */ + if (((cdb[4] >> 4) & 0xf) != 0) + goto invalid_fld; /* power conditions not supported */ + + if (cdb[4] & 0x1) { + tf->nsect = 1; /* 1 sector, lba=0 */ + + if (qc->dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + + tf->lbah = 0x0; + tf->lbam = 0x0; + tf->lbal = 0x0; + tf->device |= ATA_LBA; + } else { + /* CHS */ + tf->lbal = 0x1; /* sect */ + tf->lbam = 0x0; /* cyl low */ + tf->lbah = 0x0; /* cyl high */ + } + + tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ + } else { + /* Some odd clown BIOSen issue spindown on power off (ACPI S4 + * or S5) causing some drives to spin up and down again. + */ + if ((qc->ap->flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) && + system_state == SYSTEM_POWER_OFF) + goto skip; + + if ((qc->ap->flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) && + system_entering_hibernation()) + goto skip; + + /* Issue ATA STANDBY IMMEDIATE command */ + tf->command = ATA_CMD_STANDBYNOW1; + } + + /* + * Standby and Idle condition timers could be implemented but that + * would require libata to implement the Power condition mode page + * and allow the user to change it. Changing mode pages requires + * MODE SELECT to be implemented. + */ + + return 0; + + invalid_fld: + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + skip: + scmd->result = SAM_STAT_GOOD; + return 1; +} + + +/** + * ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command + * @qc: Storage for translated ATA taskfile + * + * Sets up an ATA taskfile to issue FLUSH CACHE or + * FLUSH CACHE EXT. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Zero on success, non-zero on error. + */ +static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc) +{ + struct ata_taskfile *tf = &qc->tf; + + tf->flags |= ATA_TFLAG_DEVICE; + tf->protocol = ATA_PROT_NODATA; + + if (qc->dev->flags & ATA_DFLAG_FLUSH_EXT) + tf->command = ATA_CMD_FLUSH_EXT; + else + tf->command = ATA_CMD_FLUSH; + + /* flush is critical for IO integrity, consider it an IO command */ + qc->flags |= ATA_QCFLAG_IO; + + return 0; +} + +/** + * scsi_6_lba_len - Get LBA and transfer length + * @cdb: SCSI command to translate + * + * Calculate LBA and transfer length for 6-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ +static void scsi_6_lba_len(const u8 *cdb, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len; + + VPRINTK("six-byte command\n"); + + lba |= ((u64)(cdb[1] & 0x1f)) << 16; + lba |= ((u64)cdb[2]) << 8; + lba |= ((u64)cdb[3]); + + len = cdb[4]; + + *plba = lba; + *plen = len; +} + +/** + * scsi_10_lba_len - Get LBA and transfer length + * @cdb: SCSI command to translate + * + * Calculate LBA and transfer length for 10-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ +static void scsi_10_lba_len(const u8 *cdb, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("ten-byte command\n"); + + lba |= ((u64)cdb[2]) << 24; + lba |= ((u64)cdb[3]) << 16; + lba |= ((u64)cdb[4]) << 8; + lba |= ((u64)cdb[5]); + + len |= ((u32)cdb[7]) << 8; + len |= ((u32)cdb[8]); + + *plba = lba; + *plen = len; +} + +/** + * scsi_16_lba_len - Get LBA and transfer length + * @cdb: SCSI command to translate + * + * Calculate LBA and transfer length for 16-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ +static void scsi_16_lba_len(const u8 *cdb, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("sixteen-byte command\n"); + + lba |= ((u64)cdb[2]) << 56; + lba |= ((u64)cdb[3]) << 48; + lba |= ((u64)cdb[4]) << 40; + lba |= ((u64)cdb[5]) << 32; + lba |= ((u64)cdb[6]) << 24; + lba |= ((u64)cdb[7]) << 16; + lba |= ((u64)cdb[8]) << 8; + lba |= ((u64)cdb[9]); + + len |= ((u32)cdb[10]) << 24; + len |= ((u32)cdb[11]) << 16; + len |= ((u32)cdb[12]) << 8; + len |= ((u32)cdb[13]); + + *plba = lba; + *plen = len; +} + +/** + * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one + * @qc: Storage for translated ATA taskfile + * + * Converts SCSI VERIFY command to an ATA READ VERIFY command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Zero on success, non-zero on error. + */ +static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + u64 dev_sectors = qc->dev->n_sectors; + const u8 *cdb = scmd->cmnd; + u64 block; + u32 n_block; + + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf->protocol = ATA_PROT_NODATA; + + if (cdb[0] == VERIFY) { + if (scmd->cmd_len < 10) + goto invalid_fld; + scsi_10_lba_len(cdb, &block, &n_block); + } else if (cdb[0] == VERIFY_16) { + if (scmd->cmd_len < 16) + goto invalid_fld; + scsi_16_lba_len(cdb, &block, &n_block); + } else + goto invalid_fld; + + if (!n_block) + goto nothing_to_do; + if (block >= dev_sectors) + goto out_of_range; + if ((block + n_block) > dev_sectors) + goto out_of_range; + + if (dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + + if (lba_28_ok(block, n_block)) { + /* use LBA28 */ + tf->command = ATA_CMD_VERIFY; + tf->device |= (block >> 24) & 0xf; + } else if (lba_48_ok(block, n_block)) { + if (!(dev->flags & ATA_DFLAG_LBA48)) + goto out_of_range; + + /* use LBA48 */ + tf->flags |= ATA_TFLAG_LBA48; + tf->command = ATA_CMD_VERIFY_EXT; + + tf->hob_nsect = (n_block >> 8) & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else + /* request too large even for LBA48 */ + goto out_of_range; + + tf->nsect = n_block & 0xff; + + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device |= ATA_LBA; + } else { + /* CHS */ + u32 sect, head, cyl, track; + + if (!lba_28_ok(block, n_block)) + goto out_of_range; + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block %u track %u cyl %u head %u sect %u\n", + (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + goto out_of_range; + + tf->command = ATA_CMD_VERIFY; + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; + } + + return 0; + +invalid_fld: + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +out_of_range: + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0); + /* "Logical Block Address out of range" */ + return 1; + +nothing_to_do: + scmd->result = SAM_STAT_GOOD; + return 1; +} + +/** + * ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one + * @qc: Storage for translated ATA taskfile + * + * Converts any of six SCSI read/write commands into the + * ATA counterpart, including starting sector (LBA), + * sector count, and taking into account the device's LBA48 + * support. + * + * Commands %READ_6, %READ_10, %READ_16, %WRITE_6, %WRITE_10, and + * %WRITE_16 are currently supported. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Zero on success, non-zero on error. + */ +static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + const u8 *cdb = scmd->cmnd; + unsigned int tf_flags = 0; + u64 block; + u32 n_block; + int rc; + + if (cdb[0] == WRITE_10 || cdb[0] == WRITE_6 || cdb[0] == WRITE_16) + tf_flags |= ATA_TFLAG_WRITE; + + /* Calculate the SCSI LBA, transfer length and FUA. */ + switch (cdb[0]) { + case READ_10: + case WRITE_10: + if (unlikely(scmd->cmd_len < 10)) + goto invalid_fld; + scsi_10_lba_len(cdb, &block, &n_block); + if (cdb[1] & (1 << 3)) + tf_flags |= ATA_TFLAG_FUA; + break; + case READ_6: + case WRITE_6: + if (unlikely(scmd->cmd_len < 6)) + goto invalid_fld; + scsi_6_lba_len(cdb, &block, &n_block); + + /* for 6-byte r/w commands, transfer length 0 + * means 256 blocks of data, not 0 block. + */ + if (!n_block) + n_block = 256; + break; + case READ_16: + case WRITE_16: + if (unlikely(scmd->cmd_len < 16)) + goto invalid_fld; + scsi_16_lba_len(cdb, &block, &n_block); + if (cdb[1] & (1 << 3)) + tf_flags |= ATA_TFLAG_FUA; + break; + default: + DPRINTK("no-byte command\n"); + goto invalid_fld; + } + + /* Check and compose ATA command */ + if (!n_block) + /* For 10-byte and 16-byte SCSI R/W commands, transfer + * length 0 means transfer 0 block of data. + * However, for ATA R/W commands, sector count 0 means + * 256 or 65536 sectors, not 0 sectors as in SCSI. + * + * WARNING: one or two older ATA drives treat 0 as 0... + */ + goto nothing_to_do; + + qc->flags |= ATA_QCFLAG_IO; + qc->nbytes = n_block * scmd->device->sector_size; + + rc = ata_build_rw_tf(&qc->tf, qc->dev, block, n_block, tf_flags, + qc->tag); + if (likely(rc == 0)) + return 0; + + if (rc == -ERANGE) + goto out_of_range; + /* treat all other errors as -EINVAL, fall through */ +invalid_fld: + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +out_of_range: + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0); + /* "Logical Block Address out of range" */ + return 1; + +nothing_to_do: + scmd->result = SAM_STAT_GOOD; + return 1; +} + +static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scsi_cmnd *cmd = qc->scsicmd; + u8 *cdb = cmd->cmnd; + int need_sense = (qc->err_mask != 0); + + /* For ATA pass thru (SAT) commands, generate a sense block if + * user mandated it or if there's an error. Note that if we + * generate because the user forced us to [CK_COND =1], a check + * condition is generated and the ATA register values are returned + * whether the command completed successfully or not. If there + * was no error, we use the following sense data: + * sk = RECOVERED ERROR + * asc,ascq = ATA PASS-THROUGH INFORMATION AVAILABLE + */ + if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) && + ((cdb[2] & 0x20) || need_sense)) { + ata_gen_passthru_sense(qc); + } else { + if (qc->flags & ATA_QCFLAG_SENSE_VALID) { + cmd->result = SAM_STAT_CHECK_CONDITION; + } else if (!need_sense) { + cmd->result = SAM_STAT_GOOD; + } else { + /* TODO: decide which descriptor format to use + * for 48b LBA devices and call that here + * instead of the fixed desc, which is only + * good for smaller LBA (and maybe CHS?) + * devices. + */ + ata_gen_ata_sense(qc); + } + } + + if (need_sense && !ap->ops->error_handler) + ata_dump_status(ap->print_id, &qc->result_tf); + + qc->scsidone(cmd); + + ata_qc_free(qc); +} + +/** + * ata_scsi_translate - Translate then issue SCSI command to ATA device + * @dev: ATA device to which the command is addressed + * @cmd: SCSI command to execute + * @xlat_func: Actor which translates @cmd to an ATA taskfile + * + * Our ->queuecommand() function has decided that the SCSI + * command issued can be directly translated into an ATA + * command, rather than handled internally. + * + * This function sets up an ata_queued_cmd structure for the + * SCSI command, and sends that ata_queued_cmd to the hardware. + * + * The xlat_func argument (actor) returns 0 if ready to execute + * ATA command, else 1 to finish translation. If 1 is returned + * then cmd->result (and possibly cmd->sense_buffer) are assumed + * to be set reflecting an error condition or clean (early) + * termination. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * 0 on success, SCSI_ML_QUEUE_DEVICE_BUSY if the command + * needs to be deferred. + */ +static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, + ata_xlat_func_t xlat_func) +{ + struct ata_port *ap = dev->link->ap; + struct ata_queued_cmd *qc; + int rc; + + VPRINTK("ENTER\n"); + + qc = ata_scsi_qc_new(dev, cmd); + if (!qc) + goto err_mem; + + /* data is present; dma-map it */ + if (cmd->sc_data_direction == DMA_FROM_DEVICE || + cmd->sc_data_direction == DMA_TO_DEVICE) { + if (unlikely(scsi_bufflen(cmd) < 1)) { + ata_dev_warn(dev, "WARNING: zero len r/w req\n"); + goto err_did; + } + + ata_sg_init(qc, scsi_sglist(cmd), scsi_sg_count(cmd)); + + qc->dma_dir = cmd->sc_data_direction; + } + + qc->complete_fn = ata_scsi_qc_complete; + + if (xlat_func(qc)) + goto early_finish; + + if (ap->ops->qc_defer) { + if ((rc = ap->ops->qc_defer(qc))) + goto defer; + } + + /* select device, send command to hardware */ + ata_qc_issue(qc); + + VPRINTK("EXIT\n"); + return 0; + +early_finish: + ata_qc_free(qc); + cmd->scsi_done(cmd); + DPRINTK("EXIT - early finish (good or error)\n"); + return 0; + +err_did: + ata_qc_free(qc); + cmd->result = (DID_ERROR << 16); + cmd->scsi_done(cmd); +err_mem: + DPRINTK("EXIT - internal\n"); + return 0; + +defer: + ata_qc_free(qc); + DPRINTK("EXIT - defer\n"); + if (rc == ATA_DEFER_LINK) + return SCSI_MLQUEUE_DEVICE_BUSY; + else + return SCSI_MLQUEUE_HOST_BUSY; +} + +/** + * ata_scsi_rbuf_get - Map response buffer. + * @cmd: SCSI command containing buffer to be mapped. + * @flags: unsigned long variable to store irq enable status + * @copy_in: copy in from user buffer + * + * Prepare buffer for simulated SCSI commands. + * + * LOCKING: + * spin_lock_irqsave(ata_scsi_rbuf_lock) on success + * + * RETURNS: + * Pointer to response buffer. + */ +static void *ata_scsi_rbuf_get(struct scsi_cmnd *cmd, bool copy_in, + unsigned long *flags) +{ + spin_lock_irqsave(&ata_scsi_rbuf_lock, *flags); + + memset(ata_scsi_rbuf, 0, ATA_SCSI_RBUF_SIZE); + if (copy_in) + sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), + ata_scsi_rbuf, ATA_SCSI_RBUF_SIZE); + return ata_scsi_rbuf; +} + +/** + * ata_scsi_rbuf_put - Unmap response buffer. + * @cmd: SCSI command containing buffer to be unmapped. + * @copy_out: copy out result + * @flags: @flags passed to ata_scsi_rbuf_get() + * + * Returns rbuf buffer. The result is copied to @cmd's buffer if + * @copy_back is true. + * + * LOCKING: + * Unlocks ata_scsi_rbuf_lock. + */ +static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, bool copy_out, + unsigned long *flags) +{ + if (copy_out) + sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), + ata_scsi_rbuf, ATA_SCSI_RBUF_SIZE); + spin_unlock_irqrestore(&ata_scsi_rbuf_lock, *flags); +} + +/** + * ata_scsi_rbuf_fill - wrapper for SCSI command simulators + * @args: device IDENTIFY data / SCSI command of interest. + * @actor: Callback hook for desired SCSI command simulator + * + * Takes care of the hard work of simulating a SCSI command... + * Mapping the response buffer, calling the command's handler, + * and handling the handler's return value. This return value + * indicates whether the handler wishes the SCSI command to be + * completed successfully (0), or not (in which case cmd->result + * and sense buffer are assumed to be set). + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static void ata_scsi_rbuf_fill(struct ata_scsi_args *args, + unsigned int (*actor)(struct ata_scsi_args *args, u8 *rbuf)) +{ + u8 *rbuf; + unsigned int rc; + struct scsi_cmnd *cmd = args->cmd; + unsigned long flags; + + rbuf = ata_scsi_rbuf_get(cmd, false, &flags); + rc = actor(args, rbuf); + ata_scsi_rbuf_put(cmd, rc == 0, &flags); + + if (rc == 0) + cmd->result = SAM_STAT_GOOD; + args->done(cmd); +} + +/** + * ata_scsiop_inq_std - Simulate INQUIRY command + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * + * Returns standard device identification data associated + * with non-VPD INQUIRY command output. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf) +{ + const u8 versions[] = { + 0x00, + 0x60, /* SAM-3 (no version claimed) */ + + 0x03, + 0x20, /* SBC-2 (no version claimed) */ + + 0x02, + 0x60 /* SPC-3 (no version claimed) */ + }; + const u8 versions_zbc[] = { + 0x00, + 0xA0, /* SAM-5 (no version claimed) */ + + 0x04, + 0xC0, /* SBC-3 (no version claimed) */ + + 0x04, + 0x60, /* SPC-4 (no version claimed) */ + + 0x60, + 0x20, /* ZBC (no version claimed) */ + }; + + u8 hdr[] = { + TYPE_DISK, + 0, + 0x5, /* claim SPC-3 version compatibility */ + 2, + 95 - 4 + }; + + VPRINTK("ENTER\n"); + + /* set scsi removable (RMB) bit per ata bit */ + if (ata_id_removable(args->id)) + hdr[1] |= (1 << 7); + + if (args->dev->class == ATA_DEV_ZAC) { + hdr[0] = TYPE_ZBC; + hdr[2] = 0x6; /* ZBC is defined in SPC-4 */ + } + + memcpy(rbuf, hdr, sizeof(hdr)); + memcpy(&rbuf[8], "ATA ", 8); + ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16); + + /* From SAT, use last 2 words from fw rev unless they are spaces */ + ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV + 2, 4); + if (strncmp(&rbuf[32], " ", 4) == 0) + ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV, 4); + + if (rbuf[32] == 0 || rbuf[32] == ' ') + memcpy(&rbuf[32], "n/a ", 4); + + if (args->dev->class == ATA_DEV_ZAC) + memcpy(rbuf + 58, versions_zbc, sizeof(versions_zbc)); + else + memcpy(rbuf + 58, versions, sizeof(versions)); + + return 0; +} + +/** + * ata_scsiop_inq_00 - Simulate INQUIRY VPD page 0, list of pages + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * + * Returns list of inquiry VPD pages available. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf) +{ + const u8 pages[] = { + 0x00, /* page 0x00, this page */ + 0x80, /* page 0x80, unit serial no page */ + 0x83, /* page 0x83, device ident page */ + 0x89, /* page 0x89, ata info page */ + 0xb0, /* page 0xb0, block limits page */ + 0xb1, /* page 0xb1, block device characteristics page */ + 0xb2, /* page 0xb2, thin provisioning page */ + }; + + rbuf[3] = sizeof(pages); /* number of supported VPD pages */ + memcpy(rbuf + 4, pages, sizeof(pages)); + return 0; +} + +/** + * ata_scsiop_inq_80 - Simulate INQUIRY VPD page 80, device serial number + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * + * Returns ATA device serial number. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf) +{ + const u8 hdr[] = { + 0, + 0x80, /* this page code */ + 0, + ATA_ID_SERNO_LEN, /* page len */ + }; + + memcpy(rbuf, hdr, sizeof(hdr)); + ata_id_string(args->id, (unsigned char *) &rbuf[4], + ATA_ID_SERNO, ATA_ID_SERNO_LEN); + return 0; +} + +/** + * ata_scsiop_inq_83 - Simulate INQUIRY VPD page 83, device identity + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * + * Yields two logical unit device identification designators: + * - vendor specific ASCII containing the ATA serial number + * - SAT defined "t10 vendor id based" containing ASCII vendor + * name ("ATA "), model and serial numbers. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf) +{ + const int sat_model_serial_desc_len = 68; + int num; + + rbuf[1] = 0x83; /* this page code */ + num = 4; + + /* piv=0, assoc=lu, code_set=ACSII, designator=vendor */ + rbuf[num + 0] = 2; + rbuf[num + 3] = ATA_ID_SERNO_LEN; + num += 4; + ata_id_string(args->id, (unsigned char *) rbuf + num, + ATA_ID_SERNO, ATA_ID_SERNO_LEN); + num += ATA_ID_SERNO_LEN; + + /* SAT defined lu model and serial numbers descriptor */ + /* piv=0, assoc=lu, code_set=ACSII, designator=t10 vendor id */ + rbuf[num + 0] = 2; + rbuf[num + 1] = 1; + rbuf[num + 3] = sat_model_serial_desc_len; + num += 4; + memcpy(rbuf + num, "ATA ", 8); + num += 8; + ata_id_string(args->id, (unsigned char *) rbuf + num, ATA_ID_PROD, + ATA_ID_PROD_LEN); + num += ATA_ID_PROD_LEN; + ata_id_string(args->id, (unsigned char *) rbuf + num, ATA_ID_SERNO, + ATA_ID_SERNO_LEN); + num += ATA_ID_SERNO_LEN; + + if (ata_id_has_wwn(args->id)) { + /* SAT defined lu world wide name */ + /* piv=0, assoc=lu, code_set=binary, designator=NAA */ + rbuf[num + 0] = 1; + rbuf[num + 1] = 3; + rbuf[num + 3] = ATA_ID_WWN_LEN; + num += 4; + ata_id_string(args->id, (unsigned char *) rbuf + num, + ATA_ID_WWN, ATA_ID_WWN_LEN); + num += ATA_ID_WWN_LEN; + } + rbuf[3] = num - 4; /* page len (assume less than 256 bytes) */ + return 0; +} + +/** + * ata_scsiop_inq_89 - Simulate INQUIRY VPD page 89, ATA info + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * + * Yields SAT-specified ATA VPD page. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf) +{ + struct ata_taskfile tf; + + memset(&tf, 0, sizeof(tf)); + + rbuf[1] = 0x89; /* our page code */ + rbuf[2] = (0x238 >> 8); /* page size fixed at 238h */ + rbuf[3] = (0x238 & 0xff); + + memcpy(&rbuf[8], "linux ", 8); + memcpy(&rbuf[16], "libata ", 16); + memcpy(&rbuf[32], DRV_VERSION, 4); + + /* we don't store the ATA device signature, so we fake it */ + + tf.command = ATA_DRDY; /* really, this is Status reg */ + tf.lbal = 0x1; + tf.nsect = 0x1; + + ata_tf_to_fis(&tf, 0, 1, &rbuf[36]); /* TODO: PMP? */ + rbuf[36] = 0x34; /* force D2H Reg FIS (34h) */ + + rbuf[56] = ATA_CMD_ID_ATA; + + memcpy(&rbuf[60], &args->id[0], 512); + return 0; +} + +static unsigned int ata_scsiop_inq_b0(struct ata_scsi_args *args, u8 *rbuf) +{ + u16 min_io_sectors; + + rbuf[1] = 0xb0; + rbuf[3] = 0x3c; /* required VPD size with unmap support */ + + /* + * Optimal transfer length granularity. + * + * This is always one physical block, but for disks with a smaller + * logical than physical sector size we need to figure out what the + * latter is. + */ + min_io_sectors = 1 << ata_id_log2_per_physical_sector(args->id); + put_unaligned_be16(min_io_sectors, &rbuf[6]); + + /* + * Optimal unmap granularity. + * + * The ATA spec doesn't even know about a granularity or alignment + * for the TRIM command. We can leave away most of the unmap related + * VPD page entries, but we have specifify a granularity to signal + * that we support some form of unmap - in thise case via WRITE SAME + * with the unmap bit set. + */ + if (ata_id_has_trim(args->id)) { + put_unaligned_be64(65535 * 512 / 8, &rbuf[36]); + put_unaligned_be32(1, &rbuf[28]); + } + + return 0; +} + +static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf) +{ + int form_factor = ata_id_form_factor(args->id); + int media_rotation_rate = ata_id_rotation_rate(args->id); + + rbuf[1] = 0xb1; + rbuf[3] = 0x3c; + rbuf[4] = media_rotation_rate >> 8; + rbuf[5] = media_rotation_rate; + rbuf[7] = form_factor; + + return 0; +} + +static unsigned int ata_scsiop_inq_b2(struct ata_scsi_args *args, u8 *rbuf) +{ + /* SCSI Thin Provisioning VPD page: SBC-3 rev 22 or later */ + rbuf[1] = 0xb2; + rbuf[3] = 0x4; + rbuf[5] = 1 << 6; /* TPWS */ + + return 0; +} + +/** + * ata_scsiop_noop - Command handler that simply returns success. + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * + * No operation. Simply returns success to caller, to indicate + * that the caller should successfully complete this SCSI command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf) +{ + VPRINTK("ENTER\n"); + return 0; +} + +/** + * modecpy - Prepare response for MODE SENSE + * @dest: output buffer + * @src: data being copied + * @n: length of mode page + * @changeable: whether changeable parameters are requested + * + * Generate a generic MODE SENSE page for either current or changeable + * parameters. + * + * LOCKING: + * None. + */ +static void modecpy(u8 *dest, const u8 *src, int n, bool changeable) +{ + if (changeable) { + memcpy(dest, src, 2); + memset(dest + 2, 0, n - 2); + } else { + memcpy(dest, src, n); + } +} + +/** + * ata_msense_caching - Simulate MODE SENSE caching info page + * @id: device IDENTIFY data + * @buf: output buffer + * @changeable: whether changeable parameters are requested + * + * Generate a caching info page, which conditionally indicates + * write caching to the SCSI layer, depending on device + * capabilities. + * + * LOCKING: + * None. + */ +static unsigned int ata_msense_caching(u16 *id, u8 *buf, bool changeable) +{ + modecpy(buf, def_cache_mpage, sizeof(def_cache_mpage), changeable); + if (changeable || ata_id_wcache_enabled(id)) + buf[2] |= (1 << 2); /* write cache enable */ + if (!changeable && !ata_id_rahead_enabled(id)) + buf[12] |= (1 << 5); /* disable read ahead */ + return sizeof(def_cache_mpage); +} + +/** + * ata_msense_ctl_mode - Simulate MODE SENSE control mode page + * @buf: output buffer + * @changeable: whether changeable parameters are requested + * + * Generate a generic MODE SENSE control mode page. + * + * LOCKING: + * None. + */ +static unsigned int ata_msense_ctl_mode(u8 *buf, bool changeable) +{ + modecpy(buf, def_control_mpage, sizeof(def_control_mpage), changeable); + return sizeof(def_control_mpage); +} + +/** + * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page + * @buf: output buffer + * @changeable: whether changeable parameters are requested + * + * Generate a generic MODE SENSE r/w error recovery page. + * + * LOCKING: + * None. + */ +static unsigned int ata_msense_rw_recovery(u8 *buf, bool changeable) +{ + modecpy(buf, def_rw_recovery_mpage, sizeof(def_rw_recovery_mpage), + changeable); + return sizeof(def_rw_recovery_mpage); +} + +/* + * We can turn this into a real blacklist if it's needed, for now just + * blacklist any Maxtor BANC1G10 revision firmware + */ +static int ata_dev_supports_fua(u16 *id) +{ + unsigned char model[ATA_ID_PROD_LEN + 1], fw[ATA_ID_FW_REV_LEN + 1]; + + if (!libata_fua) + return 0; + if (!ata_id_has_fua(id)) + return 0; + + ata_id_c_string(id, model, ATA_ID_PROD, sizeof(model)); + ata_id_c_string(id, fw, ATA_ID_FW_REV, sizeof(fw)); + + if (strcmp(model, "Maxtor")) + return 1; + if (strcmp(fw, "BANC1G10")) + return 1; + + return 0; /* blacklisted */ +} + +/** + * ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * + * Simulate MODE SENSE commands. Assume this is invoked for direct + * access devices (e.g. disks) only. There should be no block + * descriptor for other device types. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf) +{ + struct ata_device *dev = args->dev; + u8 *scsicmd = args->cmd->cmnd, *p = rbuf; + const u8 sat_blk_desc[] = { + 0, 0, 0, 0, /* number of blocks: sat unspecified */ + 0, + 0, 0x2, 0x0 /* block length: 512 bytes */ + }; + u8 pg, spg; + unsigned int ebd, page_control, six_byte; + u8 dpofua; + + VPRINTK("ENTER\n"); + + six_byte = (scsicmd[0] == MODE_SENSE); + ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */ + /* + * LLBA bit in msense(10) ignored (compliant) + */ + + page_control = scsicmd[2] >> 6; + switch (page_control) { + case 0: /* current */ + case 1: /* changeable */ + case 2: /* defaults */ + break; /* supported */ + case 3: /* saved */ + goto saving_not_supp; + default: + goto invalid_fld; + } + + if (six_byte) + p += 4 + (ebd ? 8 : 0); + else + p += 8 + (ebd ? 8 : 0); + + pg = scsicmd[2] & 0x3f; + spg = scsicmd[3]; + /* + * No mode subpages supported (yet) but asking for _all_ + * subpages may be valid + */ + if (spg && (spg != ALL_SUB_MPAGES)) + goto invalid_fld; + + switch(pg) { + case RW_RECOVERY_MPAGE: + p += ata_msense_rw_recovery(p, page_control == 1); + break; + + case CACHE_MPAGE: + p += ata_msense_caching(args->id, p, page_control == 1); + break; + + case CONTROL_MPAGE: + p += ata_msense_ctl_mode(p, page_control == 1); + break; + + case ALL_MPAGES: + p += ata_msense_rw_recovery(p, page_control == 1); + p += ata_msense_caching(args->id, p, page_control == 1); + p += ata_msense_ctl_mode(p, page_control == 1); + break; + + default: /* invalid page code */ + goto invalid_fld; + } + + dpofua = 0; + if (ata_dev_supports_fua(args->id) && (dev->flags & ATA_DFLAG_LBA48) && + (!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count)) + dpofua = 1 << 4; + + if (six_byte) { + rbuf[0] = p - rbuf - 1; + rbuf[2] |= dpofua; + if (ebd) { + rbuf[3] = sizeof(sat_blk_desc); + memcpy(rbuf + 4, sat_blk_desc, sizeof(sat_blk_desc)); + } + } else { + unsigned int output_len = p - rbuf - 2; + + rbuf[0] = output_len >> 8; + rbuf[1] = output_len; + rbuf[3] |= dpofua; + if (ebd) { + rbuf[7] = sizeof(sat_blk_desc); + memcpy(rbuf + 8, sat_blk_desc, sizeof(sat_blk_desc)); + } + } + return 0; + +invalid_fld: + ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +saving_not_supp: + ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0); + /* "Saving parameters not supported" */ + return 1; +} + +/** + * ata_scsiop_read_cap - Simulate READ CAPACITY[ 16] commands + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * + * Simulate READ CAPACITY commands. + * + * LOCKING: + * None. + */ +static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) +{ + struct ata_device *dev = args->dev; + u64 last_lba = dev->n_sectors - 1; /* LBA of the last block */ + u32 sector_size; /* physical sector size in bytes */ + u8 log2_per_phys; + u16 lowest_aligned; + + sector_size = ata_id_logical_sector_size(dev->id); + log2_per_phys = ata_id_log2_per_physical_sector(dev->id); + lowest_aligned = ata_id_logical_sector_offset(dev->id, log2_per_phys); + + VPRINTK("ENTER\n"); + + if (args->cmd->cmnd[0] == READ_CAPACITY) { + if (last_lba >= 0xffffffffULL) + last_lba = 0xffffffff; + + /* sector count, 32-bit */ + rbuf[0] = last_lba >> (8 * 3); + rbuf[1] = last_lba >> (8 * 2); + rbuf[2] = last_lba >> (8 * 1); + rbuf[3] = last_lba; + + /* sector size */ + rbuf[4] = sector_size >> (8 * 3); + rbuf[5] = sector_size >> (8 * 2); + rbuf[6] = sector_size >> (8 * 1); + rbuf[7] = sector_size; + } else { + /* sector count, 64-bit */ + rbuf[0] = last_lba >> (8 * 7); + rbuf[1] = last_lba >> (8 * 6); + rbuf[2] = last_lba >> (8 * 5); + rbuf[3] = last_lba >> (8 * 4); + rbuf[4] = last_lba >> (8 * 3); + rbuf[5] = last_lba >> (8 * 2); + rbuf[6] = last_lba >> (8 * 1); + rbuf[7] = last_lba; + + /* sector size */ + rbuf[ 8] = sector_size >> (8 * 3); + rbuf[ 9] = sector_size >> (8 * 2); + rbuf[10] = sector_size >> (8 * 1); + rbuf[11] = sector_size; + + rbuf[12] = 0; + rbuf[13] = log2_per_phys; + rbuf[14] = (lowest_aligned >> 8) & 0x3f; + rbuf[15] = lowest_aligned; + + if (ata_id_has_trim(args->id) && + !(dev->horkage & ATA_HORKAGE_NOTRIM)) { + rbuf[14] |= 0x80; /* LBPME */ + + if (ata_id_has_zero_after_trim(args->id) && + dev->horkage & ATA_HORKAGE_ZERO_AFTER_TRIM) { + ata_dev_info(dev, "Enabling discard_zeroes_data\n"); + rbuf[14] |= 0x40; /* LBPRZ */ + } + } + } + return 0; +} + +/** + * ata_scsiop_report_luns - Simulate REPORT LUNS command + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * + * Simulate REPORT LUNS command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf) +{ + VPRINTK("ENTER\n"); + rbuf[3] = 8; /* just one lun, LUN 0, size 8 bytes */ + + return 0; +} + +static void atapi_sense_complete(struct ata_queued_cmd *qc) +{ + if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) { + /* FIXME: not quite right; we don't want the + * translation of taskfile registers into + * a sense descriptors, since that's only + * correct for ATA, not ATAPI + */ + ata_gen_passthru_sense(qc); + } + + qc->scsidone(qc->scsicmd); + ata_qc_free(qc); +} + +/* is it pointless to prefer PIO for "safety reasons"? */ +static inline int ata_pio_use_silly(struct ata_port *ap) +{ + return (ap->flags & ATA_FLAG_PIO_DMA); +} + +static void atapi_request_sense(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scsi_cmnd *cmd = qc->scsicmd; + + DPRINTK("ATAPI request sense\n"); + + memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); + +#ifdef CONFIG_ATA_SFF + if (ap->ops->sff_tf_read) + ap->ops->sff_tf_read(ap, &qc->tf); +#endif + + /* fill these in, for the case where they are -not- overwritten */ + cmd->sense_buffer[0] = 0x70; + cmd->sense_buffer[2] = qc->tf.feature >> 4; + + ata_qc_reinit(qc); + + /* setup sg table and init transfer direction */ + sg_init_one(&qc->sgent, cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE); + ata_sg_init(qc, &qc->sgent, 1); + qc->dma_dir = DMA_FROM_DEVICE; + + memset(&qc->cdb, 0, qc->dev->cdb_len); + qc->cdb[0] = REQUEST_SENSE; + qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; + + qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + qc->tf.command = ATA_CMD_PACKET; + + if (ata_pio_use_silly(ap)) { + qc->tf.protocol = ATAPI_PROT_DMA; + qc->tf.feature |= ATAPI_PKT_DMA; + } else { + qc->tf.protocol = ATAPI_PROT_PIO; + qc->tf.lbam = SCSI_SENSE_BUFFERSIZE; + qc->tf.lbah = 0; + } + qc->nbytes = SCSI_SENSE_BUFFERSIZE; + + qc->complete_fn = atapi_sense_complete; + + ata_qc_issue(qc); + + DPRINTK("EXIT\n"); +} + +static void atapi_qc_complete(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + unsigned int err_mask = qc->err_mask; + + VPRINTK("ENTER, err_mask 0x%X\n", err_mask); + + /* handle completion from new EH */ + if (unlikely(qc->ap->ops->error_handler && + (err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID))) { + + if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) { + /* FIXME: not quite right; we don't want the + * translation of taskfile registers into a + * sense descriptors, since that's only + * correct for ATA, not ATAPI + */ + ata_gen_passthru_sense(qc); + } + + /* SCSI EH automatically locks door if sdev->locked is + * set. Sometimes door lock request continues to + * fail, for example, when no media is present. This + * creates a loop - SCSI EH issues door lock which + * fails and gets invoked again to acquire sense data + * for the failed command. + * + * If door lock fails, always clear sdev->locked to + * avoid this infinite loop. + * + * This may happen before SCSI scan is complete. Make + * sure qc->dev->sdev isn't NULL before dereferencing. + */ + if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL && qc->dev->sdev) + qc->dev->sdev->locked = 0; + + qc->scsicmd->result = SAM_STAT_CHECK_CONDITION; + qc->scsidone(cmd); + ata_qc_free(qc); + return; + } + + /* successful completion or old EH failure path */ + if (unlikely(err_mask & AC_ERR_DEV)) { + cmd->result = SAM_STAT_CHECK_CONDITION; + atapi_request_sense(qc); + return; + } else if (unlikely(err_mask)) { + /* FIXME: not quite right; we don't want the + * translation of taskfile registers into + * a sense descriptors, since that's only + * correct for ATA, not ATAPI + */ + ata_gen_passthru_sense(qc); + } else { + u8 *scsicmd = cmd->cmnd; + + if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) { + unsigned long flags; + u8 *buf; + + buf = ata_scsi_rbuf_get(cmd, true, &flags); + + /* ATAPI devices typically report zero for their SCSI version, + * and sometimes deviate from the spec WRT response data + * format. If SCSI version is reported as zero like normal, + * then we make the following fixups: 1) Fake MMC-5 version, + * to indicate to the Linux scsi midlayer this is a modern + * device. 2) Ensure response data format / ATAPI information + * are always correct. + */ + if (buf[2] == 0) { + buf[2] = 0x5; + buf[3] = 0x32; + } + + ata_scsi_rbuf_put(cmd, true, &flags); + } + + cmd->result = SAM_STAT_GOOD; + } + + qc->scsidone(cmd); + ata_qc_free(qc); +} +/** + * atapi_xlat - Initialize PACKET taskfile + * @qc: command structure to be initialized + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Zero on success, non-zero on failure. + */ +static unsigned int atapi_xlat(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + struct ata_device *dev = qc->dev; + int nodata = (scmd->sc_data_direction == DMA_NONE); + int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO); + unsigned int nbytes; + + memset(qc->cdb, 0, dev->cdb_len); + memcpy(qc->cdb, scmd->cmnd, scmd->cmd_len); + + qc->complete_fn = atapi_qc_complete; + + qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + if (scmd->sc_data_direction == DMA_TO_DEVICE) { + qc->tf.flags |= ATA_TFLAG_WRITE; + DPRINTK("direction: write\n"); + } + + qc->tf.command = ATA_CMD_PACKET; + ata_qc_set_pc_nbytes(qc); + + /* check whether ATAPI DMA is safe */ + if (!nodata && !using_pio && atapi_check_dma(qc)) + using_pio = 1; + + /* Some controller variants snoop this value for Packet + * transfers to do state machine and FIFO management. Thus we + * want to set it properly, and for DMA where it is + * effectively meaningless. + */ + nbytes = min(ata_qc_raw_nbytes(qc), (unsigned int)63 * 1024); + + /* Most ATAPI devices which honor transfer chunk size don't + * behave according to the spec when odd chunk size which + * matches the transfer length is specified. If the number of + * bytes to transfer is 2n+1. According to the spec, what + * should happen is to indicate that 2n+1 is going to be + * transferred and transfer 2n+2 bytes where the last byte is + * padding. + * + * In practice, this doesn't happen. ATAPI devices first + * indicate and transfer 2n bytes and then indicate and + * transfer 2 bytes where the last byte is padding. + * + * This inconsistency confuses several controllers which + * perform PIO using DMA such as Intel AHCIs and sil3124/32. + * These controllers use actual number of transferred bytes to + * update DMA poitner and transfer of 4n+2 bytes make those + * controller push DMA pointer by 4n+4 bytes because SATA data + * FISes are aligned to 4 bytes. This causes data corruption + * and buffer overrun. + * + * Always setting nbytes to even number solves this problem + * because then ATAPI devices don't have to split data at 2n + * boundaries. + */ + if (nbytes & 0x1) + nbytes++; + + qc->tf.lbam = (nbytes & 0xFF); + qc->tf.lbah = (nbytes >> 8); + + if (nodata) + qc->tf.protocol = ATAPI_PROT_NODATA; + else if (using_pio) + qc->tf.protocol = ATAPI_PROT_PIO; + else { + /* DMA data xfer */ + qc->tf.protocol = ATAPI_PROT_DMA; + qc->tf.feature |= ATAPI_PKT_DMA; + + if ((dev->flags & ATA_DFLAG_DMADIR) && + (scmd->sc_data_direction != DMA_TO_DEVICE)) + /* some SATA bridges need us to indicate data xfer direction */ + qc->tf.feature |= ATAPI_DMADIR; + } + + + /* FIXME: We need to translate 0x05 READ_BLOCK_LIMITS to a MODE_SENSE + as ATAPI tape drives don't get this right otherwise */ + return 0; +} + +static struct ata_device *ata_find_dev(struct ata_port *ap, int devno) +{ + if (!sata_pmp_attached(ap)) { + if (likely(devno < ata_link_max_devices(&ap->link))) + return &ap->link.device[devno]; + } else { + if (likely(devno < ap->nr_pmp_links)) + return &ap->pmp_link[devno].device[0]; + } + + return NULL; +} + +static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap, + const struct scsi_device *scsidev) +{ + int devno; + + /* skip commands not addressed to targets we simulate */ + if (!sata_pmp_attached(ap)) { + if (unlikely(scsidev->channel || scsidev->lun)) + return NULL; + devno = scsidev->id; + } else { + if (unlikely(scsidev->id || scsidev->lun)) + return NULL; + devno = scsidev->channel; + } + + return ata_find_dev(ap, devno); +} + +/** + * ata_scsi_find_dev - lookup ata_device from scsi_cmnd + * @ap: ATA port to which the device is attached + * @scsidev: SCSI device from which we derive the ATA device + * + * Given various information provided in struct scsi_cmnd, + * map that onto an ATA bus, and using that mapping + * determine which ata_device is associated with the + * SCSI command to be sent. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Associated ATA device, or %NULL if not found. + */ +static struct ata_device * +ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) +{ + struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev); + + if (unlikely(!dev || !ata_dev_enabled(dev))) + return NULL; + + return dev; +} + +/* + * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value. + * @byte1: Byte 1 from pass-thru CDB. + * + * RETURNS: + * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise. + */ +static u8 +ata_scsi_map_proto(u8 byte1) +{ + switch((byte1 & 0x1e) >> 1) { + case 3: /* Non-data */ + return ATA_PROT_NODATA; + + case 6: /* DMA */ + case 10: /* UDMA Data-in */ + case 11: /* UDMA Data-Out */ + return ATA_PROT_DMA; + + case 4: /* PIO Data-in */ + case 5: /* PIO Data-out */ + return ATA_PROT_PIO; + + case 0: /* Hard Reset */ + case 1: /* SRST */ + case 8: /* Device Diagnostic */ + case 9: /* Device Reset */ + case 7: /* DMA Queued */ + case 12: /* FPDMA */ + case 15: /* Return Response Info */ + default: /* Reserved */ + break; + } + + return ATA_PROT_UNKNOWN; +} + +/** + * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile + * @qc: command structure to be initialized + * + * Handles either 12 or 16-byte versions of the CDB. + * + * RETURNS: + * Zero on success, non-zero on failure. + */ +static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) +{ + struct ata_taskfile *tf = &(qc->tf); + struct scsi_cmnd *scmd = qc->scsicmd; + struct ata_device *dev = qc->dev; + const u8 *cdb = scmd->cmnd; + + if ((tf->protocol = ata_scsi_map_proto(cdb[1])) == ATA_PROT_UNKNOWN) + goto invalid_fld; + + /* + * 12 and 16 byte CDBs use different offsets to + * provide the various register values. + */ + if (cdb[0] == ATA_16) { + /* + * 16-byte CDB - may contain extended commands. + * + * If that is the case, copy the upper byte register values. + */ + if (cdb[1] & 0x01) { + tf->hob_feature = cdb[3]; + tf->hob_nsect = cdb[5]; + tf->hob_lbal = cdb[7]; + tf->hob_lbam = cdb[9]; + tf->hob_lbah = cdb[11]; + tf->flags |= ATA_TFLAG_LBA48; + } else + tf->flags &= ~ATA_TFLAG_LBA48; + + /* + * Always copy low byte, device and command registers. + */ + tf->feature = cdb[4]; + tf->nsect = cdb[6]; + tf->lbal = cdb[8]; + tf->lbam = cdb[10]; + tf->lbah = cdb[12]; + tf->device = cdb[13]; + tf->command = cdb[14]; + } else { + /* + * 12-byte CDB - incapable of extended commands. + */ + tf->flags &= ~ATA_TFLAG_LBA48; + + tf->feature = cdb[3]; + tf->nsect = cdb[4]; + tf->lbal = cdb[5]; + tf->lbam = cdb[6]; + tf->lbah = cdb[7]; + tf->device = cdb[8]; + tf->command = cdb[9]; + } + + /* enforce correct master/slave bit */ + tf->device = dev->devno ? + tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1; + + switch (tf->command) { + /* READ/WRITE LONG use a non-standard sect_size */ + case ATA_CMD_READ_LONG: + case ATA_CMD_READ_LONG_ONCE: + case ATA_CMD_WRITE_LONG: + case ATA_CMD_WRITE_LONG_ONCE: + if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1) + goto invalid_fld; + qc->sect_size = scsi_bufflen(scmd); + break; + + /* commands using reported Logical Block size (e.g. 512 or 4K) */ + case ATA_CMD_CFA_WRITE_NE: + case ATA_CMD_CFA_TRANS_SECT: + case ATA_CMD_CFA_WRITE_MULT_NE: + /* XXX: case ATA_CMD_CFA_WRITE_SECTORS_WITHOUT_ERASE: */ + case ATA_CMD_READ: + case ATA_CMD_READ_EXT: + case ATA_CMD_READ_QUEUED: + /* XXX: case ATA_CMD_READ_QUEUED_EXT: */ + case ATA_CMD_FPDMA_READ: + case ATA_CMD_READ_MULTI: + case ATA_CMD_READ_MULTI_EXT: + case ATA_CMD_PIO_READ: + case ATA_CMD_PIO_READ_EXT: + case ATA_CMD_READ_STREAM_DMA_EXT: + case ATA_CMD_READ_STREAM_EXT: + case ATA_CMD_VERIFY: + case ATA_CMD_VERIFY_EXT: + case ATA_CMD_WRITE: + case ATA_CMD_WRITE_EXT: + case ATA_CMD_WRITE_FUA_EXT: + case ATA_CMD_WRITE_QUEUED: + case ATA_CMD_WRITE_QUEUED_FUA_EXT: + case ATA_CMD_FPDMA_WRITE: + case ATA_CMD_WRITE_MULTI: + case ATA_CMD_WRITE_MULTI_EXT: + case ATA_CMD_WRITE_MULTI_FUA_EXT: + case ATA_CMD_PIO_WRITE: + case ATA_CMD_PIO_WRITE_EXT: + case ATA_CMD_WRITE_STREAM_DMA_EXT: + case ATA_CMD_WRITE_STREAM_EXT: + qc->sect_size = scmd->device->sector_size; + break; + + /* Everything else uses 512 byte "sectors" */ + default: + qc->sect_size = ATA_SECT_SIZE; + } + + /* + * Set flags so that all registers will be written, pass on + * write indication (used for PIO/DMA setup), result TF is + * copied back and we don't whine too much about its failure. + */ + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + if (scmd->sc_data_direction == DMA_TO_DEVICE) + tf->flags |= ATA_TFLAG_WRITE; + + qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET; + + /* + * Set transfer length. + * + * TODO: find out if we need to do more here to + * cover scatter/gather case. + */ + ata_qc_set_pc_nbytes(qc); + + /* We may not issue DMA commands if no DMA mode is set */ + if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) + goto invalid_fld; + + /* sanity check for pio multi commands */ + if ((cdb[1] & 0xe0) && !is_multi_taskfile(tf)) + goto invalid_fld; + + if (is_multi_taskfile(tf)) { + unsigned int multi_count = 1 << (cdb[1] >> 5); + + /* compare the passed through multi_count + * with the cached multi_count of libata + */ + if (multi_count != dev->multi_count) + ata_dev_warn(dev, "invalid multi_count %u ignored\n", + multi_count); + } + + /* + * Filter SET_FEATURES - XFER MODE command -- otherwise, + * SET_FEATURES - XFER MODE must be preceded/succeeded + * by an update to hardware-specific registers for each + * controller (i.e. the reason for ->set_piomode(), + * ->set_dmamode(), and ->post_set_mode() hooks). + */ + if (tf->command == ATA_CMD_SET_FEATURES && + tf->feature == SETFEATURES_XFER) + goto invalid_fld; + + /* + * Filter TPM commands by default. These provide an + * essentially uncontrolled encrypted "back door" between + * applications and the disk. Set libata.allow_tpm=1 if you + * have a real reason for wanting to use them. This ensures + * that installed software cannot easily mess stuff up without + * user intent. DVR type users will probably ship with this enabled + * for movie content management. + * + * Note that for ATA8 we can issue a DCS change and DCS freeze lock + * for this and should do in future but that it is not sufficient as + * DCS is an optional feature set. Thus we also do the software filter + * so that we comply with the TC consortium stated goal that the user + * can turn off TC features of their system. + */ + if (tf->command >= 0x5C && tf->command <= 0x5F && !libata_allow_tpm) + goto invalid_fld; + + return 0; + + invalid_fld: + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x00); + /* "Invalid field in cdb" */ + return 1; +} + +static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc) +{ + struct ata_taskfile *tf = &qc->tf; + struct scsi_cmnd *scmd = qc->scsicmd; + struct ata_device *dev = qc->dev; + const u8 *cdb = scmd->cmnd; + u64 block; + u32 n_block; + u32 size; + void *buf; + + /* we may not issue DMA commands if no DMA mode is set */ + if (unlikely(!dev->dma_mode)) + goto invalid_fld; + + if (unlikely(scmd->cmd_len < 16)) + goto invalid_fld; + scsi_16_lba_len(cdb, &block, &n_block); + + /* for now we only support WRITE SAME with the unmap bit set */ + if (unlikely(!(cdb[1] & 0x8))) + goto invalid_fld; + + /* + * WRITE SAME always has a sector sized buffer as payload, this + * should never be a multiple entry S/G list. + */ + if (!scsi_sg_count(scmd)) + goto invalid_fld; + + buf = page_address(sg_page(scsi_sglist(scmd))); + size = ata_set_lba_range_entries(buf, 512, block, n_block); + + if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) { + /* Newer devices support queued TRIM commands */ + tf->protocol = ATA_PROT_NCQ; + tf->command = ATA_CMD_FPDMA_SEND; + tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f; + tf->nsect = qc->tag << 3; + tf->hob_feature = (size / 512) >> 8; + tf->feature = size / 512; + + tf->auxiliary = 1; + } else { + tf->protocol = ATA_PROT_DMA; + tf->hob_feature = 0; + tf->feature = ATA_DSM_TRIM; + tf->hob_nsect = (size / 512) >> 8; + tf->nsect = size / 512; + tf->command = ATA_CMD_DSM; + } + + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 | + ATA_TFLAG_WRITE; + + ata_qc_set_pc_nbytes(qc); + + return 0; + + invalid_fld: + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x00); + /* "Invalid field in cdb" */ + return 1; +} + +/** + * ata_mselect_caching - Simulate MODE SELECT for caching info page + * @qc: Storage for translated ATA taskfile + * @buf: input buffer + * @len: number of valid bytes in the input buffer + * + * Prepare a taskfile to modify caching information for the device. + * + * LOCKING: + * None. + */ +static int ata_mselect_caching(struct ata_queued_cmd *qc, + const u8 *buf, int len) +{ + struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + char mpage[CACHE_MPAGE_LEN]; + u8 wce; + + /* + * The first two bytes of def_cache_mpage are a header, so offsets + * in mpage are off by 2 compared to buf. Same for len. + */ + + if (len != CACHE_MPAGE_LEN - 2) + return -EINVAL; + + wce = buf[0] & (1 << 2); + + /* + * Check that read-only bits are not modified. + */ + ata_msense_caching(dev->id, mpage, false); + mpage[2] &= ~(1 << 2); + mpage[2] |= wce; + if (memcmp(mpage + 2, buf, CACHE_MPAGE_LEN - 2) != 0) + return -EINVAL; + + tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + tf->protocol = ATA_PROT_NODATA; + tf->nsect = 0; + tf->command = ATA_CMD_SET_FEATURES; + tf->feature = wce ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF; + return 0; +} + +/** + * ata_scsiop_mode_select - Simulate MODE SELECT 6, 10 commands + * @qc: Storage for translated ATA taskfile + * + * Converts a MODE SELECT command to an ATA SET FEATURES taskfile. + * Assume this is invoked for direct access devices (e.g. disks) only. + * There should be no block descriptor for other device types. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static unsigned int ata_scsi_mode_select_xlat(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + const u8 *cdb = scmd->cmnd; + const u8 *p; + u8 pg, spg; + unsigned six_byte, pg_len, hdr_len, bd_len; + int len; + + VPRINTK("ENTER\n"); + + six_byte = (cdb[0] == MODE_SELECT); + if (six_byte) { + if (scmd->cmd_len < 5) + goto invalid_fld; + + len = cdb[4]; + hdr_len = 4; + } else { + if (scmd->cmd_len < 9) + goto invalid_fld; + + len = (cdb[7] << 8) + cdb[8]; + hdr_len = 8; + } + + /* We only support PF=1, SP=0. */ + if ((cdb[1] & 0x11) != 0x10) + goto invalid_fld; + + /* Test early for possible overrun. */ + if (!scsi_sg_count(scmd) || scsi_sglist(scmd)->length < len) + goto invalid_param_len; + + p = page_address(sg_page(scsi_sglist(scmd))); + + /* Move past header and block descriptors. */ + if (len < hdr_len) + goto invalid_param_len; + + if (six_byte) + bd_len = p[3]; + else + bd_len = (p[6] << 8) + p[7]; + + len -= hdr_len; + p += hdr_len; + if (len < bd_len) + goto invalid_param_len; + if (bd_len != 0 && bd_len != 8) + goto invalid_param; + + len -= bd_len; + p += bd_len; + if (len == 0) + goto skip; + + /* Parse both possible formats for the mode page headers. */ + pg = p[0] & 0x3f; + if (p[0] & 0x40) { + if (len < 4) + goto invalid_param_len; + + spg = p[1]; + pg_len = (p[2] << 8) | p[3]; + p += 4; + len -= 4; + } else { + if (len < 2) + goto invalid_param_len; + + spg = 0; + pg_len = p[1]; + p += 2; + len -= 2; + } + + /* + * No mode subpages supported (yet) but asking for _all_ + * subpages may be valid + */ + if (spg && (spg != ALL_SUB_MPAGES)) + goto invalid_param; + if (pg_len > len) + goto invalid_param_len; + + switch (pg) { + case CACHE_MPAGE: + if (ata_mselect_caching(qc, p, pg_len) < 0) + goto invalid_param; + break; + + default: /* invalid page code */ + goto invalid_param; + } + + /* + * Only one page has changeable data, so we only support setting one + * page at a time. + */ + if (len > pg_len) + goto invalid_param; + + return 0; + + invalid_fld: + /* "Invalid field in CDB" */ + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); + return 1; + + invalid_param: + /* "Invalid field in parameter list" */ + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x26, 0x0); + return 1; + + invalid_param_len: + /* "Parameter list length error" */ + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x1a, 0x0); + return 1; + + skip: + scmd->result = SAM_STAT_GOOD; + return 1; +} + +/** + * ata_get_xlat_func - check if SCSI to ATA translation is possible + * @dev: ATA device + * @cmd: SCSI command opcode to consider + * + * Look up the SCSI command given, and determine whether the + * SCSI command is to be translated or simulated. + * + * RETURNS: + * Pointer to translation function if possible, %NULL if not. + */ + +static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) +{ + switch (cmd) { + case READ_6: + case READ_10: + case READ_16: + + case WRITE_6: + case WRITE_10: + case WRITE_16: + return ata_scsi_rw_xlat; + + case WRITE_SAME_16: + return ata_scsi_write_same_xlat; + + case SYNCHRONIZE_CACHE: + if (ata_try_flush_cache(dev)) + return ata_scsi_flush_xlat; + break; + + case VERIFY: + case VERIFY_16: + return ata_scsi_verify_xlat; + + case ATA_12: + case ATA_16: + return ata_scsi_pass_thru; + + case MODE_SELECT: + case MODE_SELECT_10: + return ata_scsi_mode_select_xlat; + break; + + case START_STOP: + return ata_scsi_start_stop_xlat; + } + + return NULL; +} + +/** + * ata_scsi_dump_cdb - dump SCSI command contents to dmesg + * @ap: ATA port to which the command was being sent + * @cmd: SCSI command to dump + * + * Prints the contents of a SCSI command via printk(). + */ + +static inline void ata_scsi_dump_cdb(struct ata_port *ap, + struct scsi_cmnd *cmd) +{ +#ifdef ATA_DEBUG + struct scsi_device *scsidev = cmd->device; + u8 *scsicmd = cmd->cmnd; + + DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", + ap->print_id, + scsidev->channel, scsidev->id, scsidev->lun, + scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3], + scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7], + scsicmd[8]); +#endif +} + +static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, + struct ata_device *dev) +{ + u8 scsi_op = scmd->cmnd[0]; + ata_xlat_func_t xlat_func; + int rc = 0; + + if (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ZAC) { + if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len)) + goto bad_cdb_len; + + xlat_func = ata_get_xlat_func(dev, scsi_op); + } else { + if (unlikely(!scmd->cmd_len)) + goto bad_cdb_len; + + xlat_func = NULL; + if (likely((scsi_op != ATA_16) || !atapi_passthru16)) { + /* relay SCSI command to ATAPI device */ + int len = COMMAND_SIZE(scsi_op); + if (unlikely(len > scmd->cmd_len || len > dev->cdb_len)) + goto bad_cdb_len; + + xlat_func = atapi_xlat; + } else { + /* ATA_16 passthru, treat as an ATA command */ + if (unlikely(scmd->cmd_len > 16)) + goto bad_cdb_len; + + xlat_func = ata_get_xlat_func(dev, scsi_op); + } + } + + if (xlat_func) + rc = ata_scsi_translate(dev, scmd, xlat_func); + else + ata_scsi_simulate(dev, scmd); + + return rc; + + bad_cdb_len: + DPRINTK("bad CDB len=%u, scsi_op=0x%02x, max=%u\n", + scmd->cmd_len, scsi_op, dev->cdb_len); + scmd->result = DID_ERROR << 16; + scmd->scsi_done(scmd); + return 0; +} + +/** + * ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device + * @shost: SCSI host of command to be sent + * @cmd: SCSI command to be sent + * + * In some cases, this function translates SCSI commands into + * ATA taskfiles, and queues the taskfiles to be sent to + * hardware. In other cases, this function simulates a + * SCSI device by evaluating and responding to certain + * SCSI commands. This creates the overall effect of + * ATA and ATAPI devices appearing as SCSI devices. + * + * LOCKING: + * ATA host lock + * + * RETURNS: + * Return value from __ata_scsi_queuecmd() if @cmd can be queued, + * 0 otherwise. + */ +int ata_scsi_queuecmd(struct Scsi_Host *shost, struct scsi_cmnd *cmd) +{ + struct ata_port *ap; + struct ata_device *dev; + struct scsi_device *scsidev = cmd->device; + int rc = 0; + unsigned long irq_flags; + + ap = ata_shost_to_port(shost); + + spin_lock_irqsave(ap->lock, irq_flags); + + ata_scsi_dump_cdb(ap, cmd); + + dev = ata_scsi_find_dev(ap, scsidev); + if (likely(dev)) + rc = __ata_scsi_queuecmd(cmd, dev); + else { + cmd->result = (DID_BAD_TARGET << 16); + cmd->scsi_done(cmd); + } + + spin_unlock_irqrestore(ap->lock, irq_flags); + + return rc; +} + +/** + * ata_scsi_simulate - simulate SCSI command on ATA device + * @dev: the target device + * @cmd: SCSI command being sent to device. + * + * Interprets and directly executes a select list of SCSI commands + * that can be handled internally. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd) +{ + struct ata_scsi_args args; + const u8 *scsicmd = cmd->cmnd; + u8 tmp8; + + args.dev = dev; + args.id = dev->id; + args.cmd = cmd; + args.done = cmd->scsi_done; + + switch(scsicmd[0]) { + /* TODO: worth improving? */ + case FORMAT_UNIT: + ata_scsi_invalid_field(cmd); + break; + + case INQUIRY: + if (scsicmd[1] & 2) /* is CmdDt set? */ + ata_scsi_invalid_field(cmd); + else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); + else switch (scsicmd[2]) { + case 0x00: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_00); + break; + case 0x80: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_80); + break; + case 0x83: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83); + break; + case 0x89: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_89); + break; + case 0xb0: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b0); + break; + case 0xb1: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b1); + break; + case 0xb2: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b2); + break; + default: + ata_scsi_invalid_field(cmd); + break; + } + break; + + case MODE_SENSE: + case MODE_SENSE_10: + ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense); + break; + + case READ_CAPACITY: + ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); + break; + + case SERVICE_ACTION_IN_16: + if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16) + ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); + else + ata_scsi_invalid_field(cmd); + break; + + case REPORT_LUNS: + ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns); + break; + + case REQUEST_SENSE: + ata_scsi_set_sense(cmd, 0, 0, 0); + cmd->result = (DRIVER_SENSE << 24); + cmd->scsi_done(cmd); + break; + + /* if we reach this, then writeback caching is disabled, + * turning this into a no-op. + */ + case SYNCHRONIZE_CACHE: + /* fall through */ + + /* no-op's, complete with success */ + case REZERO_UNIT: + case SEEK_6: + case SEEK_10: + case TEST_UNIT_READY: + ata_scsi_rbuf_fill(&args, ata_scsiop_noop); + break; + + case SEND_DIAGNOSTIC: + tmp8 = scsicmd[1] & ~(1 << 3); + if ((tmp8 == 0x4) && (!scsicmd[3]) && (!scsicmd[4])) + ata_scsi_rbuf_fill(&args, ata_scsiop_noop); + else + ata_scsi_invalid_field(cmd); + break; + + /* all other commands */ + default: + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0); + /* "Invalid command operation code" */ + cmd->scsi_done(cmd); + break; + } +} + +int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) +{ + int i, rc; + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + struct Scsi_Host *shost; + + rc = -ENOMEM; + shost = scsi_host_alloc(sht, sizeof(struct ata_port *)); + if (!shost) + goto err_alloc; + + shost->eh_noresume = 1; + *(struct ata_port **)&shost->hostdata[0] = ap; + ap->scsi_host = shost; + + shost->transportt = ata_scsi_transport_template; + shost->unique_id = ap->print_id; + shost->max_id = 16; + shost->max_lun = 1; + shost->max_channel = 1; + shost->max_cmd_len = 16; + shost->no_write_same = 1; + + /* Schedule policy is determined by ->qc_defer() + * callback and it needs to see every deferred qc. + * Set host_blocked to 1 to prevent SCSI midlayer from + * automatically deferring requests. + */ + shost->max_host_blocked = 1; + + if (scsi_init_shared_tag_map(shost, host->n_tags)) + goto err_add; + + rc = scsi_add_host_with_dma(ap->scsi_host, + &ap->tdev, ap->host->dev); + if (rc) + goto err_add; + } + + return 0; + + err_add: + scsi_host_put(host->ports[i]->scsi_host); + err_alloc: + while (--i >= 0) { + struct Scsi_Host *shost = host->ports[i]->scsi_host; + + scsi_remove_host(shost); + scsi_host_put(shost); + } + return rc; +} + +void ata_scsi_scan_host(struct ata_port *ap, int sync) +{ + int tries = 5; + struct ata_device *last_failed_dev = NULL; + struct ata_link *link; + struct ata_device *dev; + + repeat: + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, link, ENABLED) { + struct scsi_device *sdev; + int channel = 0, id = 0; + + if (dev->sdev) + continue; + + if (ata_is_host_link(link)) + id = dev->devno; + else + channel = link->pmp; + + sdev = __scsi_add_device(ap->scsi_host, channel, id, 0, + NULL); + if (!IS_ERR(sdev)) { + dev->sdev = sdev; + scsi_device_put(sdev); + } else { + dev->sdev = NULL; + } + } + } + + /* If we scanned while EH was in progress or allocation + * failure occurred, scan would have failed silently. Check + * whether all devices are attached. + */ + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, link, ENABLED) { + if (!dev->sdev) + goto exit_loop; + } + } + exit_loop: + if (!link) + return; + + /* we're missing some SCSI devices */ + if (sync) { + /* If caller requested synchrnous scan && we've made + * any progress, sleep briefly and repeat. + */ + if (dev != last_failed_dev) { + msleep(100); + last_failed_dev = dev; + goto repeat; + } + + /* We might be failing to detect boot device, give it + * a few more chances. + */ + if (--tries) { + msleep(100); + goto repeat; + } + + ata_port_err(ap, + "WARNING: synchronous SCSI scan failed without making any progress, switching to async\n"); + } + + queue_delayed_work(system_long_wq, &ap->hotplug_task, + round_jiffies_relative(HZ)); +} + +/** + * ata_scsi_offline_dev - offline attached SCSI device + * @dev: ATA device to offline attached SCSI device for + * + * This function is called from ata_eh_hotplug() and responsible + * for taking the SCSI device attached to @dev offline. This + * function is called with host lock which protects dev->sdev + * against clearing. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * 1 if attached SCSI device exists, 0 otherwise. + */ +int ata_scsi_offline_dev(struct ata_device *dev) +{ + if (dev->sdev) { + scsi_device_set_state(dev->sdev, SDEV_OFFLINE); + return 1; + } + return 0; +} + +/** + * ata_scsi_remove_dev - remove attached SCSI device + * @dev: ATA device to remove attached SCSI device for + * + * This function is called from ata_eh_scsi_hotplug() and + * responsible for removing the SCSI device attached to @dev. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_scsi_remove_dev(struct ata_device *dev) +{ + struct ata_port *ap = dev->link->ap; + struct scsi_device *sdev; + unsigned long flags; + + /* Alas, we need to grab scan_mutex to ensure SCSI device + * state doesn't change underneath us and thus + * scsi_device_get() always succeeds. The mutex locking can + * be removed if there is __scsi_device_get() interface which + * increments reference counts regardless of device state. + */ + mutex_lock(&ap->scsi_host->scan_mutex); + spin_lock_irqsave(ap->lock, flags); + + /* clearing dev->sdev is protected by host lock */ + sdev = dev->sdev; + dev->sdev = NULL; + + if (sdev) { + /* If user initiated unplug races with us, sdev can go + * away underneath us after the host lock and + * scan_mutex are released. Hold onto it. + */ + if (scsi_device_get(sdev) == 0) { + /* The following ensures the attached sdev is + * offline on return from ata_scsi_offline_dev() + * regardless it wins or loses the race + * against this function. + */ + scsi_device_set_state(sdev, SDEV_OFFLINE); + } else { + WARN_ON(1); + sdev = NULL; + } + } + + spin_unlock_irqrestore(ap->lock, flags); + mutex_unlock(&ap->scsi_host->scan_mutex); + + if (sdev) { + ata_dev_info(dev, "detaching (SCSI %s)\n", + dev_name(&sdev->sdev_gendev)); + + scsi_remove_device(sdev); + scsi_device_put(sdev); + } +} + +static void ata_scsi_handle_link_detach(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + struct ata_device *dev; + + ata_for_each_dev(dev, link, ALL) { + unsigned long flags; + + if (!(dev->flags & ATA_DFLAG_DETACHED)) + continue; + + spin_lock_irqsave(ap->lock, flags); + dev->flags &= ~ATA_DFLAG_DETACHED; + spin_unlock_irqrestore(ap->lock, flags); + + if (zpodd_dev_enabled(dev)) + zpodd_exit(dev); + + ata_scsi_remove_dev(dev); + } +} + +/** + * ata_scsi_media_change_notify - send media change event + * @dev: Pointer to the disk device with media change event + * + * Tell the block layer to send a media change notification + * event. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_scsi_media_change_notify(struct ata_device *dev) +{ + if (dev->sdev) + sdev_evt_send_simple(dev->sdev, SDEV_EVT_MEDIA_CHANGE, + GFP_ATOMIC); +} + +/** + * ata_scsi_hotplug - SCSI part of hotplug + * @work: Pointer to ATA port to perform SCSI hotplug on + * + * Perform SCSI part of hotplug. It's executed from a separate + * workqueue after EH completes. This is necessary because SCSI + * hot plugging requires working EH and hot unplugging is + * synchronized with hot plugging with a mutex. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_scsi_hotplug(struct work_struct *work) +{ + struct ata_port *ap = + container_of(work, struct ata_port, hotplug_task.work); + int i; + + if (ap->pflags & ATA_PFLAG_UNLOADING) { + DPRINTK("ENTER/EXIT - unloading\n"); + return; + } + + /* + * XXX - UGLY HACK + * + * The block layer suspend/resume path is fundamentally broken due + * to freezable kthreads and workqueue and may deadlock if a block + * device gets removed while resume is in progress. I don't know + * what the solution is short of removing freezable kthreads and + * workqueues altogether. + * + * The following is an ugly hack to avoid kicking off device + * removal while freezer is active. This is a joke but does avoid + * this particular deadlock scenario. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=62801 + * http://marc.info/?l=linux-kernel&m=138695698516487 + */ +#ifdef CONFIG_FREEZER + while (pm_freezing) + msleep(10); +#endif + + DPRINTK("ENTER\n"); + mutex_lock(&ap->scsi_scan_mutex); + + /* Unplug detached devices. We cannot use link iterator here + * because PMP links have to be scanned even if PMP is + * currently not attached. Iterate manually. + */ + ata_scsi_handle_link_detach(&ap->link); + if (ap->pmp_link) + for (i = 0; i < SATA_PMP_MAX_PORTS; i++) + ata_scsi_handle_link_detach(&ap->pmp_link[i]); + + /* scan for new ones */ + ata_scsi_scan_host(ap, 0); + + mutex_unlock(&ap->scsi_scan_mutex); + DPRINTK("EXIT\n"); +} + +/** + * ata_scsi_user_scan - indication for user-initiated bus scan + * @shost: SCSI host to scan + * @channel: Channel to scan + * @id: ID to scan + * @lun: LUN to scan + * + * This function is called when user explicitly requests bus + * scan. Set probe pending flag and invoke EH. + * + * LOCKING: + * SCSI layer (we don't care) + * + * RETURNS: + * Zero. + */ +int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, + unsigned int id, u64 lun) +{ + struct ata_port *ap = ata_shost_to_port(shost); + unsigned long flags; + int devno, rc = 0; + + if (!ap->ops->error_handler) + return -EOPNOTSUPP; + + if (lun != SCAN_WILD_CARD && lun) + return -EINVAL; + + if (!sata_pmp_attached(ap)) { + if (channel != SCAN_WILD_CARD && channel) + return -EINVAL; + devno = id; + } else { + if (id != SCAN_WILD_CARD && id) + return -EINVAL; + devno = channel; + } + + spin_lock_irqsave(ap->lock, flags); + + if (devno == SCAN_WILD_CARD) { + struct ata_link *link; + + ata_for_each_link(link, ap, EDGE) { + struct ata_eh_info *ehi = &link->eh_info; + ehi->probe_mask |= ATA_ALL_DEVICES; + ehi->action |= ATA_EH_RESET; + } + } else { + struct ata_device *dev = ata_find_dev(ap, devno); + + if (dev) { + struct ata_eh_info *ehi = &dev->link->eh_info; + ehi->probe_mask |= 1 << dev->devno; + ehi->action |= ATA_EH_RESET; + } else + rc = -EINVAL; + } + + if (rc == 0) { + ata_port_schedule_eh(ap); + spin_unlock_irqrestore(ap->lock, flags); + ata_port_wait_eh(ap); + } else + spin_unlock_irqrestore(ap->lock, flags); + + return rc; +} + +/** + * ata_scsi_dev_rescan - initiate scsi_rescan_device() + * @work: Pointer to ATA port to perform scsi_rescan_device() + * + * After ATA pass thru (SAT) commands are executed successfully, + * libata need to propagate the changes to SCSI layer. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_scsi_dev_rescan(struct work_struct *work) +{ + struct ata_port *ap = + container_of(work, struct ata_port, scsi_rescan_task); + struct ata_link *link; + struct ata_device *dev; + unsigned long flags; + + mutex_lock(&ap->scsi_scan_mutex); + spin_lock_irqsave(ap->lock, flags); + + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, link, ENABLED) { + struct scsi_device *sdev = dev->sdev; + + if (!sdev) + continue; + if (scsi_device_get(sdev)) + continue; + + spin_unlock_irqrestore(ap->lock, flags); + scsi_rescan_device(&(sdev->sdev_gendev)); + scsi_device_put(sdev); + spin_lock_irqsave(ap->lock, flags); + } + } + + spin_unlock_irqrestore(ap->lock, flags); + mutex_unlock(&ap->scsi_scan_mutex); +} + +/** + * ata_sas_port_alloc - Allocate port for a SAS attached SATA device + * @host: ATA host container for all SAS ports + * @port_info: Information from low-level host driver + * @shost: SCSI host that the scsi device is attached to + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * ata_port pointer on success / NULL on failure. + */ + +struct ata_port *ata_sas_port_alloc(struct ata_host *host, + struct ata_port_info *port_info, + struct Scsi_Host *shost) +{ + struct ata_port *ap; + + ap = ata_port_alloc(host); + if (!ap) + return NULL; + + ap->port_no = 0; + ap->lock = &host->lock; + ap->pio_mask = port_info->pio_mask; + ap->mwdma_mask = port_info->mwdma_mask; + ap->udma_mask = port_info->udma_mask; + ap->flags |= port_info->flags; + ap->ops = port_info->port_ops; + ap->cbl = ATA_CBL_SATA; + + return ap; +} +EXPORT_SYMBOL_GPL(ata_sas_port_alloc); + +/** + * ata_sas_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +int ata_sas_port_start(struct ata_port *ap) +{ + /* + * the port is marked as frozen at allocation time, but if we don't + * have new eh, we won't thaw it + */ + if (!ap->ops->error_handler) + ap->pflags &= ~ATA_PFLAG_FROZEN; + return 0; +} +EXPORT_SYMBOL_GPL(ata_sas_port_start); + +/** + * ata_port_stop - Undo ata_sas_port_start() + * @ap: Port to shut down + * + * May be used as the port_stop() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_sas_port_stop(struct ata_port *ap) +{ +} +EXPORT_SYMBOL_GPL(ata_sas_port_stop); + +/** + * ata_sas_async_probe - simply schedule probing and return + * @ap: Port to probe + * + * For batch scheduling of probe for sas attached ata devices, assumes + * the port has already been through ata_sas_port_init() + */ +void ata_sas_async_probe(struct ata_port *ap) +{ + __ata_port_probe(ap); +} +EXPORT_SYMBOL_GPL(ata_sas_async_probe); + +int ata_sas_sync_probe(struct ata_port *ap) +{ + return ata_port_probe(ap); +} +EXPORT_SYMBOL_GPL(ata_sas_sync_probe); + + +/** + * ata_sas_port_init - Initialize a SATA device + * @ap: SATA port to initialize + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * Zero on success, non-zero on error. + */ + +int ata_sas_port_init(struct ata_port *ap) +{ + int rc = ap->ops->port_start(ap); + + if (rc) + return rc; + ap->print_id = atomic_inc_return(&ata_print_id); + return 0; +} +EXPORT_SYMBOL_GPL(ata_sas_port_init); + +/** + * ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc + * @ap: SATA port to destroy + * + */ + +void ata_sas_port_destroy(struct ata_port *ap) +{ + if (ap->ops->port_stop) + ap->ops->port_stop(ap); + kfree(ap); +} +EXPORT_SYMBOL_GPL(ata_sas_port_destroy); + +/** + * ata_sas_slave_configure - Default slave_config routine for libata devices + * @sdev: SCSI device to configure + * @ap: ATA port to which SCSI device is attached + * + * RETURNS: + * Zero. + */ + +int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap) +{ + ata_scsi_sdev_config(sdev); + ata_scsi_dev_config(sdev, ap->link.device); + return 0; +} +EXPORT_SYMBOL_GPL(ata_sas_slave_configure); + +/** + * ata_sas_queuecmd - Issue SCSI cdb to libata-managed device + * @cmd: SCSI command to be sent + * @ap: ATA port to which the command is being sent + * + * RETURNS: + * Return value from __ata_scsi_queuecmd() if @cmd can be queued, + * 0 otherwise. + */ + +int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap) +{ + int rc = 0; + + ata_scsi_dump_cdb(ap, cmd); + + if (likely(ata_dev_enabled(ap->link.device))) + rc = __ata_scsi_queuecmd(cmd, ap->link.device); + else { + cmd->result = (DID_BAD_TARGET << 16); + cmd->scsi_done(cmd); + } + return rc; +} +EXPORT_SYMBOL_GPL(ata_sas_queuecmd); + +int ata_sas_allocate_tag(struct ata_port *ap) +{ + unsigned int max_queue = ap->host->n_tags; + unsigned int i, tag; + + for (i = 0, tag = ap->sas_last_tag + 1; i < max_queue; i++, tag++) { + tag = tag < max_queue ? tag : 0; + + /* the last tag is reserved for internal command. */ + if (tag == ATA_TAG_INTERNAL) + continue; + + if (!test_and_set_bit(tag, &ap->sas_tag_allocated)) { + ap->sas_last_tag = tag; + return tag; + } + } + return -1; +} + +void ata_sas_free_tag(unsigned int tag, struct ata_port *ap) +{ + clear_bit(tag, &ap->sas_tag_allocated); +} diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c new file mode 100644 index 000000000..cdf6215a9 --- /dev/null +++ b/drivers/ata/libata-sff.c @@ -0,0 +1,3347 @@ +/* + * libata-sff.c - helper library for PCI IDE BMDMA + * + * Maintained by: Tejun Heo + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2006 Red Hat, Inc. All rights reserved. + * Copyright 2003-2006 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from http://www.t13.org/ and + * http://www.sata-io.org/ + * + */ + +#include +#include +#include +#include +#include +#include + +#include "libata.h" + +static struct workqueue_struct *ata_sff_wq; + +const struct ata_port_operations ata_sff_port_ops = { + .inherits = &ata_base_port_ops, + + .qc_prep = ata_noop_qc_prep, + .qc_issue = ata_sff_qc_issue, + .qc_fill_rtf = ata_sff_qc_fill_rtf, + + .freeze = ata_sff_freeze, + .thaw = ata_sff_thaw, + .prereset = ata_sff_prereset, + .softreset = ata_sff_softreset, + .hardreset = sata_sff_hardreset, + .postreset = ata_sff_postreset, + .error_handler = ata_sff_error_handler, + + .sff_dev_select = ata_sff_dev_select, + .sff_check_status = ata_sff_check_status, + .sff_tf_load = ata_sff_tf_load, + .sff_tf_read = ata_sff_tf_read, + .sff_exec_command = ata_sff_exec_command, + .sff_data_xfer = ata_sff_data_xfer, + .sff_drain_fifo = ata_sff_drain_fifo, + + .lost_interrupt = ata_sff_lost_interrupt, +}; +EXPORT_SYMBOL_GPL(ata_sff_port_ops); + +/** + * ata_sff_check_status - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * and return its value. This also clears pending interrupts + * from this device + * + * LOCKING: + * Inherited from caller. + */ +u8 ata_sff_check_status(struct ata_port *ap) +{ + return ioread8(ap->ioaddr.status_addr); +} +EXPORT_SYMBOL_GPL(ata_sff_check_status); + +/** + * ata_sff_altstatus - Read device alternate status reg + * @ap: port where the device is + * + * Reads ATA taskfile alternate status register for + * currently-selected device and return its value. + * + * Note: may NOT be used as the check_altstatus() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +static u8 ata_sff_altstatus(struct ata_port *ap) +{ + if (ap->ops->sff_check_altstatus) + return ap->ops->sff_check_altstatus(ap); + + return ioread8(ap->ioaddr.altstatus_addr); +} + +/** + * ata_sff_irq_status - Check if the device is busy + * @ap: port where the device is + * + * Determine if the port is currently busy. Uses altstatus + * if available in order to avoid clearing shared IRQ status + * when finding an IRQ source. Non ctl capable devices don't + * share interrupt lines fortunately for us. + * + * LOCKING: + * Inherited from caller. + */ +static u8 ata_sff_irq_status(struct ata_port *ap) +{ + u8 status; + + if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) { + status = ata_sff_altstatus(ap); + /* Not us: We are busy */ + if (status & ATA_BUSY) + return status; + } + /* Clear INTRQ latch */ + status = ap->ops->sff_check_status(ap); + return status; +} + +/** + * ata_sff_sync - Flush writes + * @ap: Port to wait for. + * + * CAUTION: + * If we have an mmio device with no ctl and no altstatus + * method this will fail. No such devices are known to exist. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_sff_sync(struct ata_port *ap) +{ + if (ap->ops->sff_check_altstatus) + ap->ops->sff_check_altstatus(ap); + else if (ap->ioaddr.altstatus_addr) + ioread8(ap->ioaddr.altstatus_addr); +} + +/** + * ata_sff_pause - Flush writes and wait 400nS + * @ap: Port to pause for. + * + * CAUTION: + * If we have an mmio device with no ctl and no altstatus + * method this will fail. No such devices are known to exist. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_sff_pause(struct ata_port *ap) +{ + ata_sff_sync(ap); + ndelay(400); +} +EXPORT_SYMBOL_GPL(ata_sff_pause); + +/** + * ata_sff_dma_pause - Pause before commencing DMA + * @ap: Port to pause for. + * + * Perform I/O fencing and ensure sufficient cycle delays occur + * for the HDMA1:0 transition + */ + +void ata_sff_dma_pause(struct ata_port *ap) +{ + if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) { + /* An altstatus read will cause the needed delay without + messing up the IRQ status */ + ata_sff_altstatus(ap); + return; + } + /* There are no DMA controllers without ctl. BUG here to ensure + we never violate the HDMA1:0 transition timing and risk + corruption. */ + BUG(); +} +EXPORT_SYMBOL_GPL(ata_sff_dma_pause); + +/** + * ata_sff_busy_sleep - sleep until BSY clears, or timeout + * @ap: port containing status register to be polled + * @tmout_pat: impatience timeout in msecs + * @tmout: overall timeout in msecs + * + * Sleep until ATA Status register bit BSY clears, + * or a timeout occurs. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_sff_busy_sleep(struct ata_port *ap, + unsigned long tmout_pat, unsigned long tmout) +{ + unsigned long timer_start, timeout; + u8 status; + + status = ata_sff_busy_wait(ap, ATA_BUSY, 300); + timer_start = jiffies; + timeout = ata_deadline(timer_start, tmout_pat); + while (status != 0xff && (status & ATA_BUSY) && + time_before(jiffies, timeout)) { + ata_msleep(ap, 50); + status = ata_sff_busy_wait(ap, ATA_BUSY, 3); + } + + if (status != 0xff && (status & ATA_BUSY)) + ata_port_warn(ap, + "port is slow to respond, please be patient (Status 0x%x)\n", + status); + + timeout = ata_deadline(timer_start, tmout); + while (status != 0xff && (status & ATA_BUSY) && + time_before(jiffies, timeout)) { + ata_msleep(ap, 50); + status = ap->ops->sff_check_status(ap); + } + + if (status == 0xff) + return -ENODEV; + + if (status & ATA_BUSY) { + ata_port_err(ap, + "port failed to respond (%lu secs, Status 0x%x)\n", + DIV_ROUND_UP(tmout, 1000), status); + return -EBUSY; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ata_sff_busy_sleep); + +static int ata_sff_check_ready(struct ata_link *link) +{ + u8 status = link->ap->ops->sff_check_status(link->ap); + + return ata_check_ready(status); +} + +/** + * ata_sff_wait_ready - sleep until BSY clears, or timeout + * @link: SFF link to wait ready status for + * @deadline: deadline jiffies for the operation + * + * Sleep until ATA Status register bit BSY clears, or timeout + * occurs. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline) +{ + return ata_wait_ready(link, deadline, ata_sff_check_ready); +} +EXPORT_SYMBOL_GPL(ata_sff_wait_ready); + +/** + * ata_sff_set_devctl - Write device control reg + * @ap: port where the device is + * @ctl: value to write + * + * Writes ATA taskfile device control register. + * + * Note: may NOT be used as the sff_set_devctl() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +static void ata_sff_set_devctl(struct ata_port *ap, u8 ctl) +{ + if (ap->ops->sff_set_devctl) + ap->ops->sff_set_devctl(ap, ctl); + else + iowrite8(ctl, ap->ioaddr.ctl_addr); +} + +/** + * ata_sff_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * + * Use the method defined in the ATA specification to + * make either device 0, or device 1, active on the + * ATA channel. Works with both PIO and MMIO. + * + * May be used as the dev_select() entry in ata_port_operations. + * + * LOCKING: + * caller. + */ +void ata_sff_dev_select(struct ata_port *ap, unsigned int device) +{ + u8 tmp; + + if (device == 0) + tmp = ATA_DEVICE_OBS; + else + tmp = ATA_DEVICE_OBS | ATA_DEV1; + + iowrite8(tmp, ap->ioaddr.device_addr); + ata_sff_pause(ap); /* needed; also flushes, for mmio */ +} +EXPORT_SYMBOL_GPL(ata_sff_dev_select); + +/** + * ata_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * @wait: non-zero to wait for Status register BSY bit to clear + * @can_sleep: non-zero if context allows sleeping + * + * Use the method defined in the ATA specification to + * make either device 0, or device 1, active on the + * ATA channel. + * + * This is a high-level version of ata_sff_dev_select(), which + * additionally provides the services of inserting the proper + * pauses and status polling, where needed. + * + * LOCKING: + * caller. + */ +static void ata_dev_select(struct ata_port *ap, unsigned int device, + unsigned int wait, unsigned int can_sleep) +{ + if (ata_msg_probe(ap)) + ata_port_info(ap, "ata_dev_select: ENTER, device %u, wait %u\n", + device, wait); + + if (wait) + ata_wait_idle(ap); + + ap->ops->sff_dev_select(ap, device); + + if (wait) { + if (can_sleep && ap->link.device[device].class == ATA_DEV_ATAPI) + ata_msleep(ap, 150); + ata_wait_idle(ap); + } +} + +/** + * ata_sff_irq_on - Enable interrupts on a port. + * @ap: Port on which interrupts are enabled. + * + * Enable interrupts on a legacy IDE device using MMIO or PIO, + * wait for idle, clear any pending interrupts. + * + * Note: may NOT be used as the sff_irq_on() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +void ata_sff_irq_on(struct ata_port *ap) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + if (ap->ops->sff_irq_on) { + ap->ops->sff_irq_on(ap); + return; + } + + ap->ctl &= ~ATA_NIEN; + ap->last_ctl = ap->ctl; + + if (ap->ops->sff_set_devctl || ioaddr->ctl_addr) + ata_sff_set_devctl(ap, ap->ctl); + ata_wait_idle(ap); + + if (ap->ops->sff_irq_clear) + ap->ops->sff_irq_clear(ap); +} +EXPORT_SYMBOL_GPL(ata_sff_irq_on); + +/** + * ata_sff_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller. + * + * LOCKING: + * Inherited from caller. + */ +void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + if (ioaddr->ctl_addr) + iowrite8(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + WARN_ON_ONCE(!ioaddr->ctl_addr); + iowrite8(tf->hob_feature, ioaddr->feature_addr); + iowrite8(tf->hob_nsect, ioaddr->nsect_addr); + iowrite8(tf->hob_lbal, ioaddr->lbal_addr); + iowrite8(tf->hob_lbam, ioaddr->lbam_addr); + iowrite8(tf->hob_lbah, ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + + if (is_addr) { + iowrite8(tf->feature, ioaddr->feature_addr); + iowrite8(tf->nsect, ioaddr->nsect_addr); + iowrite8(tf->lbal, ioaddr->lbal_addr); + iowrite8(tf->lbam, ioaddr->lbam_addr); + iowrite8(tf->lbah, ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + iowrite8(tf->device, ioaddr->device_addr); + VPRINTK("device 0x%X\n", tf->device); + } + + ata_wait_idle(ap); +} +EXPORT_SYMBOL_GPL(ata_sff_tf_load); + +/** + * ata_sff_tf_read - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. Assumes the device has a fully SFF compliant task file + * layout and behaviour. If you device does not (eg has a different + * status method) then you will need to provide a replacement tf_read + * + * LOCKING: + * Inherited from caller. + */ +void ata_sff_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->command = ata_sff_check_status(ap); + tf->feature = ioread8(ioaddr->error_addr); + tf->nsect = ioread8(ioaddr->nsect_addr); + tf->lbal = ioread8(ioaddr->lbal_addr); + tf->lbam = ioread8(ioaddr->lbam_addr); + tf->lbah = ioread8(ioaddr->lbah_addr); + tf->device = ioread8(ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + if (likely(ioaddr->ctl_addr)) { + iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr); + tf->hob_feature = ioread8(ioaddr->error_addr); + tf->hob_nsect = ioread8(ioaddr->nsect_addr); + tf->hob_lbal = ioread8(ioaddr->lbal_addr); + tf->hob_lbam = ioread8(ioaddr->lbam_addr); + tf->hob_lbah = ioread8(ioaddr->lbah_addr); + iowrite8(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + } else + WARN_ON_ONCE(1); + } +} +EXPORT_SYMBOL_GPL(ata_sff_tf_read); + +/** + * ata_sff_exec_command - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues ATA command, with proper synchronization with interrupt + * handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_sff_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) +{ + DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); + + iowrite8(tf->command, ap->ioaddr.command_addr); + ata_sff_pause(ap); +} +EXPORT_SYMBOL_GPL(ata_sff_exec_command); + +/** + * ata_tf_to_host - issue ATA taskfile to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues ATA taskfile register set to ATA host controller, + * with proper synchronization with interrupt handler and + * other threads. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static inline void ata_tf_to_host(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + ap->ops->sff_tf_load(ap, tf); + ap->ops->sff_exec_command(ap, tf); +} + +/** + * ata_sff_data_xfer - Transfer data by PIO + * @dev: device to target + * @buf: data buffer + * @buflen: buffer length + * @rw: read/write + * + * Transfer data from/to the device data register by PIO. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * Bytes consumed. + */ +unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) +{ + struct ata_port *ap = dev->link->ap; + void __iomem *data_addr = ap->ioaddr.data_addr; + unsigned int words = buflen >> 1; + + /* Transfer multiple of 2 bytes */ + if (rw == READ) + ioread16_rep(data_addr, buf, words); + else + iowrite16_rep(data_addr, buf, words); + + /* Transfer trailing byte, if any. */ + if (unlikely(buflen & 0x01)) { + unsigned char pad[2] = { }; + + /* Point buf to the tail of buffer */ + buf += buflen - 1; + + /* + * Use io*16_rep() accessors here as well to avoid pointlessly + * swapping bytes to and from on the big endian machines... + */ + if (rw == READ) { + ioread16_rep(data_addr, pad, 1); + *buf = pad[0]; + } else { + pad[0] = *buf; + iowrite16_rep(data_addr, pad, 1); + } + words++; + } + + return words << 1; +} +EXPORT_SYMBOL_GPL(ata_sff_data_xfer); + +/** + * ata_sff_data_xfer32 - Transfer data by PIO + * @dev: device to target + * @buf: data buffer + * @buflen: buffer length + * @rw: read/write + * + * Transfer data from/to the device data register by PIO using 32bit + * I/O operations. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * Bytes consumed. + */ + +unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) +{ + struct ata_port *ap = dev->link->ap; + void __iomem *data_addr = ap->ioaddr.data_addr; + unsigned int words = buflen >> 2; + int slop = buflen & 3; + + if (!(ap->pflags & ATA_PFLAG_PIO32)) + return ata_sff_data_xfer(dev, buf, buflen, rw); + + /* Transfer multiple of 4 bytes */ + if (rw == READ) + ioread32_rep(data_addr, buf, words); + else + iowrite32_rep(data_addr, buf, words); + + /* Transfer trailing bytes, if any */ + if (unlikely(slop)) { + unsigned char pad[4] = { }; + + /* Point buf to the tail of buffer */ + buf += buflen - slop; + + /* + * Use io*_rep() accessors here as well to avoid pointlessly + * swapping bytes to and from on the big endian machines... + */ + if (rw == READ) { + if (slop < 3) + ioread16_rep(data_addr, pad, 1); + else + ioread32_rep(data_addr, pad, 1); + memcpy(buf, pad, slop); + } else { + memcpy(pad, buf, slop); + if (slop < 3) + iowrite16_rep(data_addr, pad, 1); + else + iowrite32_rep(data_addr, pad, 1); + } + } + return (buflen + 1) & ~1; +} +EXPORT_SYMBOL_GPL(ata_sff_data_xfer32); + +/** + * ata_sff_data_xfer_noirq - Transfer data by PIO + * @dev: device to target + * @buf: data buffer + * @buflen: buffer length + * @rw: read/write + * + * Transfer data from/to the device data register by PIO. Do the + * transfer with interrupts disabled. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * Bytes consumed. + */ +unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) +{ + unsigned long flags; + unsigned int consumed; + + local_irq_save(flags); + consumed = ata_sff_data_xfer32(dev, buf, buflen, rw); + local_irq_restore(flags); + + return consumed; +} +EXPORT_SYMBOL_GPL(ata_sff_data_xfer_noirq); + +/** + * ata_pio_sector - Transfer a sector of data. + * @qc: Command on going + * + * Transfer qc->sect_size bytes of data from/to the ATA device. + * + * LOCKING: + * Inherited from caller. + */ +static void ata_pio_sector(struct ata_queued_cmd *qc) +{ + int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); + struct ata_port *ap = qc->ap; + struct page *page; + unsigned int offset; + unsigned char *buf; + + if (qc->curbytes == qc->nbytes - qc->sect_size) + ap->hsm_task_state = HSM_ST_LAST; + + page = sg_page(qc->cursg); + offset = qc->cursg->offset + qc->cursg_ofs; + + /* get the current page and offset */ + page = nth_page(page, (offset >> PAGE_SHIFT)); + offset %= PAGE_SIZE; + + DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + + if (PageHighMem(page)) { + unsigned long flags; + + /* FIXME: use a bounce buffer */ + local_irq_save(flags); + buf = kmap_atomic(page); + + /* do the actual data transfer */ + ap->ops->sff_data_xfer(qc->dev, buf + offset, qc->sect_size, + do_write); + + kunmap_atomic(buf); + local_irq_restore(flags); + } else { + buf = page_address(page); + ap->ops->sff_data_xfer(qc->dev, buf + offset, qc->sect_size, + do_write); + } + + if (!do_write && !PageSlab(page)) + flush_dcache_page(page); + + qc->curbytes += qc->sect_size; + qc->cursg_ofs += qc->sect_size; + + if (qc->cursg_ofs == qc->cursg->length) { + qc->cursg = sg_next(qc->cursg); + qc->cursg_ofs = 0; + } +} + +/** + * ata_pio_sectors - Transfer one or many sectors. + * @qc: Command on going + * + * Transfer one or many sectors of data from/to the + * ATA device for the DRQ request. + * + * LOCKING: + * Inherited from caller. + */ +static void ata_pio_sectors(struct ata_queued_cmd *qc) +{ + if (is_multi_taskfile(&qc->tf)) { + /* READ/WRITE MULTIPLE */ + unsigned int nsect; + + WARN_ON_ONCE(qc->dev->multi_count == 0); + + nsect = min((qc->nbytes - qc->curbytes) / qc->sect_size, + qc->dev->multi_count); + while (nsect--) + ata_pio_sector(qc); + } else + ata_pio_sector(qc); + + ata_sff_sync(qc->ap); /* flush */ +} + +/** + * atapi_send_cdb - Write CDB bytes to hardware + * @ap: Port to which ATAPI device is attached. + * @qc: Taskfile currently active + * + * When device has indicated its readiness to accept + * a CDB, this function is called. Send the CDB. + * + * LOCKING: + * caller. + */ +static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + /* send SCSI cdb */ + DPRINTK("send cdb\n"); + WARN_ON_ONCE(qc->dev->cdb_len < 12); + + ap->ops->sff_data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1); + ata_sff_sync(ap); + /* FIXME: If the CDB is for DMA do we need to do the transition delay + or is bmdma_start guaranteed to do it ? */ + switch (qc->tf.protocol) { + case ATAPI_PROT_PIO: + ap->hsm_task_state = HSM_ST; + break; + case ATAPI_PROT_NODATA: + ap->hsm_task_state = HSM_ST_LAST; + break; +#ifdef CONFIG_ATA_BMDMA + case ATAPI_PROT_DMA: + ap->hsm_task_state = HSM_ST_LAST; + /* initiate bmdma */ + ap->ops->bmdma_start(qc); + break; +#endif /* CONFIG_ATA_BMDMA */ + default: + BUG(); + } +} + +/** + * __atapi_pio_bytes - Transfer data from/to the ATAPI device. + * @qc: Command on going + * @bytes: number of bytes + * + * Transfer Transfer data from/to the ATAPI device. + * + * LOCKING: + * Inherited from caller. + * + */ +static int __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) +{ + int rw = (qc->tf.flags & ATA_TFLAG_WRITE) ? WRITE : READ; + struct ata_port *ap = qc->ap; + struct ata_device *dev = qc->dev; + struct ata_eh_info *ehi = &dev->link->eh_info; + struct scatterlist *sg; + struct page *page; + unsigned char *buf; + unsigned int offset, count, consumed; + +next_sg: + sg = qc->cursg; + if (unlikely(!sg)) { + ata_ehi_push_desc(ehi, "unexpected or too much trailing data " + "buf=%u cur=%u bytes=%u", + qc->nbytes, qc->curbytes, bytes); + return -1; + } + + page = sg_page(sg); + offset = sg->offset + qc->cursg_ofs; + + /* get the current page and offset */ + page = nth_page(page, (offset >> PAGE_SHIFT)); + offset %= PAGE_SIZE; + + /* don't overrun current sg */ + count = min(sg->length - qc->cursg_ofs, bytes); + + /* don't cross page boundaries */ + count = min(count, (unsigned int)PAGE_SIZE - offset); + + DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + + if (PageHighMem(page)) { + unsigned long flags; + + /* FIXME: use bounce buffer */ + local_irq_save(flags); + buf = kmap_atomic(page); + + /* do the actual data transfer */ + consumed = ap->ops->sff_data_xfer(dev, buf + offset, + count, rw); + + kunmap_atomic(buf); + local_irq_restore(flags); + } else { + buf = page_address(page); + consumed = ap->ops->sff_data_xfer(dev, buf + offset, + count, rw); + } + + bytes -= min(bytes, consumed); + qc->curbytes += count; + qc->cursg_ofs += count; + + if (qc->cursg_ofs == sg->length) { + qc->cursg = sg_next(qc->cursg); + qc->cursg_ofs = 0; + } + + /* + * There used to be a WARN_ON_ONCE(qc->cursg && count != consumed); + * Unfortunately __atapi_pio_bytes doesn't know enough to do the WARN + * check correctly as it doesn't know if it is the last request being + * made. Somebody should implement a proper sanity check. + */ + if (bytes) + goto next_sg; + return 0; +} + +/** + * atapi_pio_bytes - Transfer data from/to the ATAPI device. + * @qc: Command on going + * + * Transfer Transfer data from/to the ATAPI device. + * + * LOCKING: + * Inherited from caller. + */ +static void atapi_pio_bytes(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *dev = qc->dev; + struct ata_eh_info *ehi = &dev->link->eh_info; + unsigned int ireason, bc_lo, bc_hi, bytes; + int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0; + + /* Abuse qc->result_tf for temp storage of intermediate TF + * here to save some kernel stack usage. + * For normal completion, qc->result_tf is not relevant. For + * error, qc->result_tf is later overwritten by ata_qc_complete(). + * So, the correctness of qc->result_tf is not affected. + */ + ap->ops->sff_tf_read(ap, &qc->result_tf); + ireason = qc->result_tf.nsect; + bc_lo = qc->result_tf.lbam; + bc_hi = qc->result_tf.lbah; + bytes = (bc_hi << 8) | bc_lo; + + /* shall be cleared to zero, indicating xfer of data */ + if (unlikely(ireason & ATAPI_COD)) + goto atapi_check; + + /* make sure transfer direction matches expected */ + i_write = ((ireason & ATAPI_IO) == 0) ? 1 : 0; + if (unlikely(do_write != i_write)) + goto atapi_check; + + if (unlikely(!bytes)) + goto atapi_check; + + VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes); + + if (unlikely(__atapi_pio_bytes(qc, bytes))) + goto err_out; + ata_sff_sync(ap); /* flush */ + + return; + + atapi_check: + ata_ehi_push_desc(ehi, "ATAPI check failed (ireason=0x%x bytes=%u)", + ireason, bytes); + err_out: + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; +} + +/** + * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue. + * @ap: the target ata_port + * @qc: qc on going + * + * RETURNS: + * 1 if ok in workqueue, 0 otherwise. + */ +static inline int ata_hsm_ok_in_wq(struct ata_port *ap, + struct ata_queued_cmd *qc) +{ + if (qc->tf.flags & ATA_TFLAG_POLLING) + return 1; + + if (ap->hsm_task_state == HSM_ST_FIRST) { + if (qc->tf.protocol == ATA_PROT_PIO && + (qc->tf.flags & ATA_TFLAG_WRITE)) + return 1; + + if (ata_is_atapi(qc->tf.protocol) && + !(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + return 1; + } + + return 0; +} + +/** + * ata_hsm_qc_complete - finish a qc running on standard HSM + * @qc: Command to complete + * @in_wq: 1 if called from workqueue, 0 otherwise + * + * Finish @qc which is running on standard HSM. + * + * LOCKING: + * If @in_wq is zero, spin_lock_irqsave(host lock). + * Otherwise, none on entry and grabs host lock. + */ +static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) +{ + struct ata_port *ap = qc->ap; + unsigned long flags; + + if (ap->ops->error_handler) { + if (in_wq) { + spin_lock_irqsave(ap->lock, flags); + + /* EH might have kicked in while host lock is + * released. + */ + qc = ata_qc_from_tag(ap, qc->tag); + if (qc) { + if (likely(!(qc->err_mask & AC_ERR_HSM))) { + ata_sff_irq_on(ap); + ata_qc_complete(qc); + } else + ata_port_freeze(ap); + } + + spin_unlock_irqrestore(ap->lock, flags); + } else { + if (likely(!(qc->err_mask & AC_ERR_HSM))) + ata_qc_complete(qc); + else + ata_port_freeze(ap); + } + } else { + if (in_wq) { + spin_lock_irqsave(ap->lock, flags); + ata_sff_irq_on(ap); + ata_qc_complete(qc); + spin_unlock_irqrestore(ap->lock, flags); + } else + ata_qc_complete(qc); + } +} + +/** + * ata_sff_hsm_move - move the HSM to the next state. + * @ap: the target ata_port + * @qc: qc on going + * @status: current device status + * @in_wq: 1 if called from workqueue, 0 otherwise + * + * RETURNS: + * 1 when poll next status needed, 0 otherwise. + */ +int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, + u8 status, int in_wq) +{ + struct ata_link *link = qc->dev->link; + struct ata_eh_info *ehi = &link->eh_info; + unsigned long flags = 0; + int poll_next; + + WARN_ON_ONCE((qc->flags & ATA_QCFLAG_ACTIVE) == 0); + + /* Make sure ata_sff_qc_issue() does not throw things + * like DMA polling into the workqueue. Notice that + * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING). + */ + WARN_ON_ONCE(in_wq != ata_hsm_ok_in_wq(ap, qc)); + +fsm_start: + DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n", + ap->print_id, qc->tf.protocol, ap->hsm_task_state, status); + + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Send first data block or PACKET CDB */ + + /* If polling, we will stay in the work queue after + * sending the data. Otherwise, interrupt handler + * takes over after sending the data. + */ + poll_next = (qc->tf.flags & ATA_TFLAG_POLLING); + + /* check device status */ + if (unlikely((status & ATA_DRQ) == 0)) { + /* handle BSY=0, DRQ=0 as error */ + if (likely(status & (ATA_ERR | ATA_DF))) + /* device stops HSM for abort/error */ + qc->err_mask |= AC_ERR_DEV; + else { + /* HSM violation. Let EH handle this */ + ata_ehi_push_desc(ehi, + "ST_FIRST: !(DRQ|ERR|DF)"); + qc->err_mask |= AC_ERR_HSM; + } + + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* Device should not ask for data transfer (DRQ=1) + * when it finds something wrong. + * We ignore DRQ here and stop the HSM by + * changing hsm_task_state to HSM_ST_ERR and + * let the EH abort the command or reset the device. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + /* Some ATAPI tape drives forget to clear the ERR bit + * when doing the next command (mostly request sense). + * We ignore ERR here to workaround and proceed sending + * the CDB. + */ + if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) { + ata_ehi_push_desc(ehi, "ST_FIRST: " + "DRQ=1 with device error, " + "dev_stat 0x%X", status); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + } + + /* Send the CDB (atapi) or the first data block (ata pio out). + * During the state transition, interrupt handler shouldn't + * be invoked before the data transfer is complete and + * hsm_task_state is changed. Hence, the following locking. + */ + if (in_wq) + spin_lock_irqsave(ap->lock, flags); + + if (qc->tf.protocol == ATA_PROT_PIO) { + /* PIO data out protocol. + * send first data block. + */ + + /* ata_pio_sectors() might change the state + * to HSM_ST_LAST. so, the state is changed here + * before ata_pio_sectors(). + */ + ap->hsm_task_state = HSM_ST; + ata_pio_sectors(qc); + } else + /* send CDB */ + atapi_send_cdb(ap, qc); + + if (in_wq) + spin_unlock_irqrestore(ap->lock, flags); + + /* if polling, ata_sff_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ + break; + + case HSM_ST: + /* complete command or read/write the data register */ + if (qc->tf.protocol == ATAPI_PROT_PIO) { + /* ATAPI PIO protocol */ + if ((status & ATA_DRQ) == 0) { + /* No more data to transfer or device error. + * Device error will be tagged in HSM_ST_LAST. + */ + ap->hsm_task_state = HSM_ST_LAST; + goto fsm_start; + } + + /* Device should not ask for data transfer (DRQ=1) + * when it finds something wrong. + * We ignore DRQ here and stop the HSM by + * changing hsm_task_state to HSM_ST_ERR and + * let the EH abort the command or reset the device. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + ata_ehi_push_desc(ehi, "ST-ATAPI: " + "DRQ=1 with device error, " + "dev_stat 0x%X", status); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + atapi_pio_bytes(qc); + + if (unlikely(ap->hsm_task_state == HSM_ST_ERR)) + /* bad ireason reported by device */ + goto fsm_start; + + } else { + /* ATA PIO protocol */ + if (unlikely((status & ATA_DRQ) == 0)) { + /* handle BSY=0, DRQ=0 as error */ + if (likely(status & (ATA_ERR | ATA_DF))) { + /* device stops HSM for abort/error */ + qc->err_mask |= AC_ERR_DEV; + + /* If diagnostic failed and this is + * IDENTIFY, it's likely a phantom + * device. Mark hint. + */ + if (qc->dev->horkage & + ATA_HORKAGE_DIAGNOSTIC) + qc->err_mask |= + AC_ERR_NODEV_HINT; + } else { + /* HSM violation. Let EH handle this. + * Phantom devices also trigger this + * condition. Mark hint. + */ + ata_ehi_push_desc(ehi, "ST-ATA: " + "DRQ=0 without device error, " + "dev_stat 0x%X", status); + qc->err_mask |= AC_ERR_HSM | + AC_ERR_NODEV_HINT; + } + + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* For PIO reads, some devices may ask for + * data transfer (DRQ=1) alone with ERR=1. + * We respect DRQ here and transfer one + * block of junk data before changing the + * hsm_task_state to HSM_ST_ERR. + * + * For PIO writes, ERR=1 DRQ=1 doesn't make + * sense since the data block has been + * transferred to the device. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + /* data might be corrputed */ + qc->err_mask |= AC_ERR_DEV; + + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { + ata_pio_sectors(qc); + status = ata_wait_idle(ap); + } + + if (status & (ATA_BUSY | ATA_DRQ)) { + ata_ehi_push_desc(ehi, "ST-ATA: " + "BUSY|DRQ persists on ERR|DF, " + "dev_stat 0x%X", status); + qc->err_mask |= AC_ERR_HSM; + } + + /* There are oddball controllers with + * status register stuck at 0x7f and + * lbal/m/h at zero which makes it + * pass all other presence detection + * mechanisms we have. Set NODEV_HINT + * for it. Kernel bz#7241. + */ + if (status == 0x7f) + qc->err_mask |= AC_ERR_NODEV_HINT; + + /* ata_pio_sectors() might change the + * state to HSM_ST_LAST. so, the state + * is changed after ata_pio_sectors(). + */ + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + ata_pio_sectors(qc); + + if (ap->hsm_task_state == HSM_ST_LAST && + (!(qc->tf.flags & ATA_TFLAG_WRITE))) { + /* all data read */ + status = ata_wait_idle(ap); + goto fsm_start; + } + } + + poll_next = 1; + break; + + case HSM_ST_LAST: + if (unlikely(!ata_ok(status))) { + qc->err_mask |= __ac_err_mask(status); + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* no more data to transfer */ + DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n", + ap->print_id, qc->dev->devno, status); + + WARN_ON_ONCE(qc->err_mask & (AC_ERR_DEV | AC_ERR_HSM)); + + ap->hsm_task_state = HSM_ST_IDLE; + + /* complete taskfile transaction */ + ata_hsm_qc_complete(qc, in_wq); + + poll_next = 0; + break; + + case HSM_ST_ERR: + ap->hsm_task_state = HSM_ST_IDLE; + + /* complete taskfile transaction */ + ata_hsm_qc_complete(qc, in_wq); + + poll_next = 0; + break; + default: + poll_next = 0; + BUG(); + } + + return poll_next; +} +EXPORT_SYMBOL_GPL(ata_sff_hsm_move); + +void ata_sff_queue_work(struct work_struct *work) +{ + queue_work(ata_sff_wq, work); +} +EXPORT_SYMBOL_GPL(ata_sff_queue_work); + +void ata_sff_queue_delayed_work(struct delayed_work *dwork, unsigned long delay) +{ + queue_delayed_work(ata_sff_wq, dwork, delay); +} +EXPORT_SYMBOL_GPL(ata_sff_queue_delayed_work); + +void ata_sff_queue_pio_task(struct ata_link *link, unsigned long delay) +{ + struct ata_port *ap = link->ap; + + WARN_ON((ap->sff_pio_task_link != NULL) && + (ap->sff_pio_task_link != link)); + ap->sff_pio_task_link = link; + + /* may fail if ata_sff_flush_pio_task() in progress */ + ata_sff_queue_delayed_work(&ap->sff_pio_task, msecs_to_jiffies(delay)); +} +EXPORT_SYMBOL_GPL(ata_sff_queue_pio_task); + +void ata_sff_flush_pio_task(struct ata_port *ap) +{ + DPRINTK("ENTER\n"); + + cancel_delayed_work_sync(&ap->sff_pio_task); + + /* + * We wanna reset the HSM state to IDLE. If we do so without + * grabbing the port lock, critical sections protected by it which + * expect the HSM state to stay stable may get surprised. For + * example, we may set IDLE in between the time + * __ata_sff_port_intr() checks for HSM_ST_IDLE and before it calls + * ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG(). + */ + spin_lock_irq(ap->lock); + ap->hsm_task_state = HSM_ST_IDLE; + spin_unlock_irq(ap->lock); + + ap->sff_pio_task_link = NULL; + + if (ata_msg_ctl(ap)) + ata_port_dbg(ap, "%s: EXIT\n", __func__); +} + +static void ata_sff_pio_task(struct work_struct *work) +{ + struct ata_port *ap = + container_of(work, struct ata_port, sff_pio_task.work); + struct ata_link *link = ap->sff_pio_task_link; + struct ata_queued_cmd *qc; + u8 status; + int poll_next; + + BUG_ON(ap->sff_pio_task_link == NULL); + /* qc can be NULL if timeout occurred */ + qc = ata_qc_from_tag(ap, link->active_tag); + if (!qc) { + ap->sff_pio_task_link = NULL; + return; + } + +fsm_start: + WARN_ON_ONCE(ap->hsm_task_state == HSM_ST_IDLE); + + /* + * This is purely heuristic. This is a fast path. + * Sometimes when we enter, BSY will be cleared in + * a chk-status or two. If not, the drive is probably seeking + * or something. Snooze for a couple msecs, then + * chk-status again. If still busy, queue delayed work. + */ + status = ata_sff_busy_wait(ap, ATA_BUSY, 5); + if (status & ATA_BUSY) { + ata_msleep(ap, 2); + status = ata_sff_busy_wait(ap, ATA_BUSY, 10); + if (status & ATA_BUSY) { + ata_sff_queue_pio_task(link, ATA_SHORT_PAUSE); + return; + } + } + + /* + * hsm_move() may trigger another command to be processed. + * clean the link beforehand. + */ + ap->sff_pio_task_link = NULL; + /* move the HSM */ + poll_next = ata_sff_hsm_move(ap, qc, status, 1); + + /* another command or interrupt handler + * may be running at this point. + */ + if (poll_next) + goto fsm_start; +} + +/** + * ata_sff_qc_issue - issue taskfile to a SFF controller + * @qc: command to issue to device + * + * This function issues a PIO or NODATA command to a SFF + * controller. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Zero on success, AC_ERR_* mask on failure + */ +unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_link *link = qc->dev->link; + + /* Use polling pio if the LLD doesn't handle + * interrupt driven pio and atapi CDB interrupt. + */ + if (ap->flags & ATA_FLAG_PIO_POLLING) + qc->tf.flags |= ATA_TFLAG_POLLING; + + /* select the device */ + ata_dev_select(ap, qc->dev->devno, 1, 0); + + /* start the command */ + switch (qc->tf.protocol) { + case ATA_PROT_NODATA: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + + ata_tf_to_host(ap, &qc->tf); + ap->hsm_task_state = HSM_ST_LAST; + + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_sff_queue_pio_task(link, 0); + + break; + + case ATA_PROT_PIO: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + + ata_tf_to_host(ap, &qc->tf); + + if (qc->tf.flags & ATA_TFLAG_WRITE) { + /* PIO data out protocol */ + ap->hsm_task_state = HSM_ST_FIRST; + ata_sff_queue_pio_task(link, 0); + + /* always send first data block using the + * ata_sff_pio_task() codepath. + */ + } else { + /* PIO data in protocol */ + ap->hsm_task_state = HSM_ST; + + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_sff_queue_pio_task(link, 0); + + /* if polling, ata_sff_pio_task() handles the + * rest. otherwise, interrupt handler takes + * over from here. + */ + } + + break; + + case ATAPI_PROT_PIO: + case ATAPI_PROT_NODATA: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + + ata_tf_to_host(ap, &qc->tf); + + ap->hsm_task_state = HSM_ST_FIRST; + + /* send cdb by polling if no cdb interrupt */ + if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || + (qc->tf.flags & ATA_TFLAG_POLLING)) + ata_sff_queue_pio_task(link, 0); + break; + + default: + WARN_ON_ONCE(1); + return AC_ERR_SYSTEM; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ata_sff_qc_issue); + +/** + * ata_sff_qc_fill_rtf - fill result TF using ->sff_tf_read + * @qc: qc to fill result TF for + * + * @qc is finished and result TF needs to be filled. Fill it + * using ->sff_tf_read. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * true indicating that result TF is successfully filled. + */ +bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc) +{ + qc->ap->ops->sff_tf_read(qc->ap, &qc->result_tf); + return true; +} +EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf); + +static unsigned int ata_sff_idle_irq(struct ata_port *ap) +{ + ap->stats.idle_irq++; + +#ifdef ATA_IRQ_TRAP + if ((ap->stats.idle_irq % 1000) == 0) { + ap->ops->sff_check_status(ap); + if (ap->ops->sff_irq_clear) + ap->ops->sff_irq_clear(ap); + ata_port_warn(ap, "irq trap\n"); + return 1; + } +#endif + return 0; /* irq not handled */ +} + +static unsigned int __ata_sff_port_intr(struct ata_port *ap, + struct ata_queued_cmd *qc, + bool hsmv_on_idle) +{ + u8 status; + + VPRINTK("ata%u: protocol %d task_state %d\n", + ap->print_id, qc->tf.protocol, ap->hsm_task_state); + + /* Check whether we are expecting interrupt in this state */ + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ + + /* Check the ATA_DFLAG_CDB_INTR flag is enough here. + * The flag was turned on only for atapi devices. No + * need to check ata_is_atapi(qc->tf.protocol) again. + */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + return ata_sff_idle_irq(ap); + break; + case HSM_ST_IDLE: + return ata_sff_idle_irq(ap); + default: + break; + } + + /* check main status, clearing INTRQ if needed */ + status = ata_sff_irq_status(ap); + if (status & ATA_BUSY) { + if (hsmv_on_idle) { + /* BMDMA engine is already stopped, we're screwed */ + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + } else + return ata_sff_idle_irq(ap); + } + + /* clear irq events */ + if (ap->ops->sff_irq_clear) + ap->ops->sff_irq_clear(ap); + + ata_sff_hsm_move(ap, qc, status, 0); + + return 1; /* irq handled */ +} + +/** + * ata_sff_port_intr - Handle SFF port interrupt + * @ap: Port on which interrupt arrived (possibly...) + * @qc: Taskfile currently active in engine + * + * Handle port interrupt for given queued command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * One if interrupt was handled, zero if not (shared irq). + */ +unsigned int ata_sff_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + return __ata_sff_port_intr(ap, qc, false); +} +EXPORT_SYMBOL_GPL(ata_sff_port_intr); + +static inline irqreturn_t __ata_sff_interrupt(int irq, void *dev_instance, + unsigned int (*port_intr)(struct ata_port *, struct ata_queued_cmd *)) +{ + struct ata_host *host = dev_instance; + bool retried = false; + unsigned int i; + unsigned int handled, idle, polling; + unsigned long flags; + + /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ + spin_lock_irqsave(&host->lock, flags); + +retry: + handled = idle = polling = 0; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc) { + if (!(qc->tf.flags & ATA_TFLAG_POLLING)) + handled |= port_intr(ap, qc); + else + polling |= 1 << i; + } else + idle |= 1 << i; + } + + /* + * If no port was expecting IRQ but the controller is actually + * asserting IRQ line, nobody cared will ensue. Check IRQ + * pending status if available and clear spurious IRQ. + */ + if (!handled && !retried) { + bool retry = false; + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + if (polling & (1 << i)) + continue; + + if (!ap->ops->sff_irq_check || + !ap->ops->sff_irq_check(ap)) + continue; + + if (idle & (1 << i)) { + ap->ops->sff_check_status(ap); + if (ap->ops->sff_irq_clear) + ap->ops->sff_irq_clear(ap); + } else { + /* clear INTRQ and check if BUSY cleared */ + if (!(ap->ops->sff_check_status(ap) & ATA_BUSY)) + retry |= true; + /* + * With command in flight, we can't do + * sff_irq_clear() w/o racing with completion. + */ + } + } + + if (retry) { + retried = true; + goto retry; + } + } + + spin_unlock_irqrestore(&host->lock, flags); + + return IRQ_RETVAL(handled); +} + +/** + * ata_sff_interrupt - Default SFF ATA host interrupt handler + * @irq: irq line (unused) + * @dev_instance: pointer to our ata_host information structure + * + * Default interrupt handler for PCI IDE devices. Calls + * ata_sff_port_intr() for each port that is not disabled. + * + * LOCKING: + * Obtains host lock during operation. + * + * RETURNS: + * IRQ_NONE or IRQ_HANDLED. + */ +irqreturn_t ata_sff_interrupt(int irq, void *dev_instance) +{ + return __ata_sff_interrupt(irq, dev_instance, ata_sff_port_intr); +} +EXPORT_SYMBOL_GPL(ata_sff_interrupt); + +/** + * ata_sff_lost_interrupt - Check for an apparent lost interrupt + * @ap: port that appears to have timed out + * + * Called from the libata error handlers when the core code suspects + * an interrupt has been lost. If it has complete anything we can and + * then return. Interface must support altstatus for this faster + * recovery to occur. + * + * Locking: + * Caller holds host lock + */ + +void ata_sff_lost_interrupt(struct ata_port *ap) +{ + u8 status; + struct ata_queued_cmd *qc; + + /* Only one outstanding command per SFF channel */ + qc = ata_qc_from_tag(ap, ap->link.active_tag); + /* We cannot lose an interrupt on a non-existent or polled command */ + if (!qc || qc->tf.flags & ATA_TFLAG_POLLING) + return; + /* See if the controller thinks it is still busy - if so the command + isn't a lost IRQ but is still in progress */ + status = ata_sff_altstatus(ap); + if (status & ATA_BUSY) + return; + + /* There was a command running, we are no longer busy and we have + no interrupt. */ + ata_port_warn(ap, "lost interrupt (Status 0x%x)\n", + status); + /* Run the host interrupt logic as if the interrupt had not been + lost */ + ata_sff_port_intr(ap, qc); +} +EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt); + +/** + * ata_sff_freeze - Freeze SFF controller port + * @ap: port to freeze + * + * Freeze SFF controller port. + * + * LOCKING: + * Inherited from caller. + */ +void ata_sff_freeze(struct ata_port *ap) +{ + ap->ctl |= ATA_NIEN; + ap->last_ctl = ap->ctl; + + if (ap->ops->sff_set_devctl || ap->ioaddr.ctl_addr) + ata_sff_set_devctl(ap, ap->ctl); + + /* Under certain circumstances, some controllers raise IRQ on + * ATA_NIEN manipulation. Also, many controllers fail to mask + * previously pending IRQ on ATA_NIEN assertion. Clear it. + */ + ap->ops->sff_check_status(ap); + + if (ap->ops->sff_irq_clear) + ap->ops->sff_irq_clear(ap); +} +EXPORT_SYMBOL_GPL(ata_sff_freeze); + +/** + * ata_sff_thaw - Thaw SFF controller port + * @ap: port to thaw + * + * Thaw SFF controller port. + * + * LOCKING: + * Inherited from caller. + */ +void ata_sff_thaw(struct ata_port *ap) +{ + /* clear & re-enable interrupts */ + ap->ops->sff_check_status(ap); + if (ap->ops->sff_irq_clear) + ap->ops->sff_irq_clear(ap); + ata_sff_irq_on(ap); +} +EXPORT_SYMBOL_GPL(ata_sff_thaw); + +/** + * ata_sff_prereset - prepare SFF link for reset + * @link: SFF link to be reset + * @deadline: deadline jiffies for the operation + * + * SFF link @link is about to be reset. Initialize it. It first + * calls ata_std_prereset() and wait for !BSY if the port is + * being softreset. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_sff_prereset(struct ata_link *link, unsigned long deadline) +{ + struct ata_eh_context *ehc = &link->eh_context; + int rc; + + rc = ata_std_prereset(link, deadline); + if (rc) + return rc; + + /* if we're about to do hardreset, nothing more to do */ + if (ehc->i.action & ATA_EH_HARDRESET) + return 0; + + /* wait for !BSY if we don't know that no device is attached */ + if (!ata_link_offline(link)) { + rc = ata_sff_wait_ready(link, deadline); + if (rc && rc != -ENODEV) { + ata_link_warn(link, + "device not ready (errno=%d), forcing hardreset\n", + rc); + ehc->i.action |= ATA_EH_HARDRESET; + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(ata_sff_prereset); + +/** + * ata_devchk - PATA device presence detection + * @ap: ATA channel to examine + * @device: Device to examine (starting at zero) + * + * This technique was originally described in + * Hale Landis's ATADRVR (www.ata-atapi.com), and + * later found its way into the ATA/ATAPI spec. + * + * Write a pattern to the ATA shadow registers, + * and if a device is present, it will respond by + * correctly storing and echoing back the + * ATA shadow register contents. + * + * LOCKING: + * caller. + */ +static unsigned int ata_devchk(struct ata_port *ap, unsigned int device) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u8 nsect, lbal; + + ap->ops->sff_dev_select(ap, device); + + iowrite8(0x55, ioaddr->nsect_addr); + iowrite8(0xaa, ioaddr->lbal_addr); + + iowrite8(0xaa, ioaddr->nsect_addr); + iowrite8(0x55, ioaddr->lbal_addr); + + iowrite8(0x55, ioaddr->nsect_addr); + iowrite8(0xaa, ioaddr->lbal_addr); + + nsect = ioread8(ioaddr->nsect_addr); + lbal = ioread8(ioaddr->lbal_addr); + + if ((nsect == 0x55) && (lbal == 0xaa)) + return 1; /* we found a device */ + + return 0; /* nothing found */ +} + +/** + * ata_sff_dev_classify - Parse returned ATA device signature + * @dev: ATA device to classify (starting at zero) + * @present: device seems present + * @r_err: Value of error register on completion + * + * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs, + * an ATA/ATAPI-defined set of values is placed in the ATA + * shadow registers, indicating the results of device detection + * and diagnostics. + * + * Select the ATA device, and read the values from the ATA shadow + * registers. Then parse according to the Error register value, + * and the spec-defined values examined by ata_dev_classify(). + * + * LOCKING: + * caller. + * + * RETURNS: + * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE. + */ +unsigned int ata_sff_dev_classify(struct ata_device *dev, int present, + u8 *r_err) +{ + struct ata_port *ap = dev->link->ap; + struct ata_taskfile tf; + unsigned int class; + u8 err; + + ap->ops->sff_dev_select(ap, dev->devno); + + memset(&tf, 0, sizeof(tf)); + + ap->ops->sff_tf_read(ap, &tf); + err = tf.feature; + if (r_err) + *r_err = err; + + /* see if device passed diags: continue and warn later */ + if (err == 0) + /* diagnostic fail : do nothing _YET_ */ + dev->horkage |= ATA_HORKAGE_DIAGNOSTIC; + else if (err == 1) + /* do nothing */ ; + else if ((dev->devno == 0) && (err == 0x81)) + /* do nothing */ ; + else + return ATA_DEV_NONE; + + /* determine if device is ATA or ATAPI */ + class = ata_dev_classify(&tf); + + if (class == ATA_DEV_UNKNOWN) { + /* If the device failed diagnostic, it's likely to + * have reported incorrect device signature too. + * Assume ATA device if the device seems present but + * device signature is invalid with diagnostic + * failure. + */ + if (present && (dev->horkage & ATA_HORKAGE_DIAGNOSTIC)) + class = ATA_DEV_ATA; + else + class = ATA_DEV_NONE; + } else if ((class == ATA_DEV_ATA) && + (ap->ops->sff_check_status(ap) == 0)) + class = ATA_DEV_NONE; + + return class; +} +EXPORT_SYMBOL_GPL(ata_sff_dev_classify); + +/** + * ata_sff_wait_after_reset - wait for devices to become ready after reset + * @link: SFF link which is just reset + * @devmask: mask of present devices + * @deadline: deadline jiffies for the operation + * + * Wait devices attached to SFF @link to become ready after + * reset. It contains preceding 150ms wait to avoid accessing TF + * status register too early. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -ENODEV if some or all of devices in @devmask + * don't seem to exist. -errno on other errors. + */ +int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int dev0 = devmask & (1 << 0); + unsigned int dev1 = devmask & (1 << 1); + int rc, ret = 0; + + ata_msleep(ap, ATA_WAIT_AFTER_RESET); + + /* always check readiness of the master device */ + rc = ata_sff_wait_ready(link, deadline); + /* -ENODEV means the odd clown forgot the D7 pulldown resistor + * and TF status is 0xff, bail out on it too. + */ + if (rc) + return rc; + + /* if device 1 was found in ata_devchk, wait for register + * access briefly, then wait for BSY to clear. + */ + if (dev1) { + int i; + + ap->ops->sff_dev_select(ap, 1); + + /* Wait for register access. Some ATAPI devices fail + * to set nsect/lbal after reset, so don't waste too + * much time on it. We're gonna wait for !BSY anyway. + */ + for (i = 0; i < 2; i++) { + u8 nsect, lbal; + + nsect = ioread8(ioaddr->nsect_addr); + lbal = ioread8(ioaddr->lbal_addr); + if ((nsect == 1) && (lbal == 1)) + break; + ata_msleep(ap, 50); /* give drive a breather */ + } + + rc = ata_sff_wait_ready(link, deadline); + if (rc) { + if (rc != -ENODEV) + return rc; + ret = rc; + } + } + + /* is all this really necessary? */ + ap->ops->sff_dev_select(ap, 0); + if (dev1) + ap->ops->sff_dev_select(ap, 1); + if (dev0) + ap->ops->sff_dev_select(ap, 0); + + return ret; +} +EXPORT_SYMBOL_GPL(ata_sff_wait_after_reset); + +static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask, + unsigned long deadline) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + DPRINTK("ata%u: bus reset via SRST\n", ap->print_id); + + if (ap->ioaddr.ctl_addr) { + /* software reset. causes dev0 to be selected */ + iowrite8(ap->ctl, ioaddr->ctl_addr); + udelay(20); /* FIXME: flush */ + iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr); + udelay(20); /* FIXME: flush */ + iowrite8(ap->ctl, ioaddr->ctl_addr); + ap->last_ctl = ap->ctl; + } + + /* wait the port to become ready */ + return ata_sff_wait_after_reset(&ap->link, devmask, deadline); +} + +/** + * ata_sff_softreset - reset host port via ATA SRST + * @link: ATA link to reset + * @classes: resulting classes of attached devices + * @deadline: deadline jiffies for the operation + * + * Reset host port using ATA SRST. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_sff_softreset(struct ata_link *link, unsigned int *classes, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; + unsigned int devmask = 0; + int rc; + u8 err; + + DPRINTK("ENTER\n"); + + /* determine if device 0/1 are present */ + if (ata_devchk(ap, 0)) + devmask |= (1 << 0); + if (slave_possible && ata_devchk(ap, 1)) + devmask |= (1 << 1); + + /* select device 0 again */ + ap->ops->sff_dev_select(ap, 0); + + /* issue bus reset */ + DPRINTK("about to softreset, devmask=%x\n", devmask); + rc = ata_bus_softreset(ap, devmask, deadline); + /* if link is occupied, -ENODEV too is an error */ + if (rc && (rc != -ENODEV || sata_scr_valid(link))) { + ata_link_err(link, "SRST failed (errno=%d)\n", rc); + return rc; + } + + /* determine by signature whether we have ATA or ATAPI devices */ + classes[0] = ata_sff_dev_classify(&link->device[0], + devmask & (1 << 0), &err); + if (slave_possible && err != 0x81) + classes[1] = ata_sff_dev_classify(&link->device[1], + devmask & (1 << 1), &err); + + DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); + return 0; +} +EXPORT_SYMBOL_GPL(ata_sff_softreset); + +/** + * sata_sff_hardreset - reset host port via SATA phy reset + * @link: link to reset + * @class: resulting class of attached device + * @deadline: deadline jiffies for the operation + * + * SATA phy-reset host port using DET bits of SControl register, + * wait for !BSY and classify the attached device. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int sata_sff_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_eh_context *ehc = &link->eh_context; + const unsigned long *timing = sata_ehc_deb_timing(ehc); + bool online; + int rc; + + rc = sata_link_hardreset(link, timing, deadline, &online, + ata_sff_check_ready); + if (online) + *class = ata_sff_dev_classify(link->device, 1, NULL); + + DPRINTK("EXIT, class=%u\n", *class); + return rc; +} +EXPORT_SYMBOL_GPL(sata_sff_hardreset); + +/** + * ata_sff_postreset - SFF postreset callback + * @link: the target SFF ata_link + * @classes: classes of attached devices + * + * This function is invoked after a successful reset. It first + * calls ata_std_postreset() and performs SFF specific postreset + * processing. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_sff_postreset(struct ata_link *link, unsigned int *classes) +{ + struct ata_port *ap = link->ap; + + ata_std_postreset(link, classes); + + /* is double-select really necessary? */ + if (classes[0] != ATA_DEV_NONE) + ap->ops->sff_dev_select(ap, 1); + if (classes[1] != ATA_DEV_NONE) + ap->ops->sff_dev_select(ap, 0); + + /* bail out if no device is present */ + if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { + DPRINTK("EXIT, no device\n"); + return; + } + + /* set up device control */ + if (ap->ops->sff_set_devctl || ap->ioaddr.ctl_addr) { + ata_sff_set_devctl(ap, ap->ctl); + ap->last_ctl = ap->ctl; + } +} +EXPORT_SYMBOL_GPL(ata_sff_postreset); + +/** + * ata_sff_drain_fifo - Stock FIFO drain logic for SFF controllers + * @qc: command + * + * Drain the FIFO and device of any stuck data following a command + * failing to complete. In some cases this is necessary before a + * reset will recover the device. + * + */ + +void ata_sff_drain_fifo(struct ata_queued_cmd *qc) +{ + int count; + struct ata_port *ap; + + /* We only need to flush incoming data when a command was running */ + if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) + return; + + ap = qc->ap; + /* Drain up to 64K of data before we give up this recovery method */ + for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) + && count < 65536; count += 2) + ioread16(ap->ioaddr.data_addr); + + /* Can become DEBUG later */ + if (count) + ata_port_dbg(ap, "drained %d bytes to clear DRQ\n", count); + +} +EXPORT_SYMBOL_GPL(ata_sff_drain_fifo); + +/** + * ata_sff_error_handler - Stock error handler for SFF controller + * @ap: port to handle error for + * + * Stock error handler for SFF controller. It can handle both + * PATA and SATA controllers. Many controllers should be able to + * use this EH as-is or with some added handling before and + * after. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_sff_error_handler(struct ata_port *ap) +{ + ata_reset_fn_t softreset = ap->ops->softreset; + ata_reset_fn_t hardreset = ap->ops->hardreset; + struct ata_queued_cmd *qc; + unsigned long flags; + + qc = __ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && !(qc->flags & ATA_QCFLAG_FAILED)) + qc = NULL; + + spin_lock_irqsave(ap->lock, flags); + + /* + * We *MUST* do FIFO draining before we issue a reset as + * several devices helpfully clear their internal state and + * will lock solid if we touch the data port post reset. Pass + * qc in case anyone wants to do different PIO/DMA recovery or + * has per command fixups + */ + if (ap->ops->sff_drain_fifo) + ap->ops->sff_drain_fifo(qc); + + spin_unlock_irqrestore(ap->lock, flags); + + /* ignore built-in hardresets if SCR access is not available */ + if ((hardreset == sata_std_hardreset || + hardreset == sata_sff_hardreset) && !sata_scr_valid(&ap->link)) + hardreset = NULL; + + ata_do_eh(ap, ap->ops->prereset, softreset, hardreset, + ap->ops->postreset); +} +EXPORT_SYMBOL_GPL(ata_sff_error_handler); + +/** + * ata_sff_std_ports - initialize ioaddr with standard port offsets. + * @ioaddr: IO address structure to be initialized + * + * Utility function which initializes data_addr, error_addr, + * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr, + * device_addr, status_addr, and command_addr to standard offsets + * relative to cmd_addr. + * + * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr. + */ +void ata_sff_std_ports(struct ata_ioports *ioaddr) +{ + ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA; + ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR; + ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE; + ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT; + ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL; + ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM; + ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH; + ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE; + ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS; + ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD; +} +EXPORT_SYMBOL_GPL(ata_sff_std_ports); + +#ifdef CONFIG_PCI + +static int ata_resources_present(struct pci_dev *pdev, int port) +{ + int i; + + /* Check the PCI resources for this channel are enabled */ + port = port * 2; + for (i = 0; i < 2; i++) { + if (pci_resource_start(pdev, port + i) == 0 || + pci_resource_len(pdev, port + i) == 0) + return 0; + } + return 1; +} + +/** + * ata_pci_sff_init_host - acquire native PCI ATA resources and init host + * @host: target ATA host + * + * Acquire native PCI ATA resources for @host and initialize the + * first two ports of @host accordingly. Ports marked dummy are + * skipped and allocation failure makes the port dummy. + * + * Note that native PCI resources are valid even for legacy hosts + * as we fix up pdev resources array early in boot, so this + * function can be used for both native and legacy SFF hosts. + * + * LOCKING: + * Inherited from calling layer (may sleep). + * + * RETURNS: + * 0 if at least one port is initialized, -ENODEV if no port is + * available. + */ +int ata_pci_sff_init_host(struct ata_host *host) +{ + struct device *gdev = host->dev; + struct pci_dev *pdev = to_pci_dev(gdev); + unsigned int mask = 0; + int i, rc; + + /* request, iomap BARs and init port addresses accordingly */ + for (i = 0; i < 2; i++) { + struct ata_port *ap = host->ports[i]; + int base = i * 2; + void __iomem * const *iomap; + + if (ata_port_is_dummy(ap)) + continue; + + /* Discard disabled ports. Some controllers show + * their unused channels this way. Disabled ports are + * made dummy. + */ + if (!ata_resources_present(pdev, i)) { + ap->ops = &ata_dummy_port_ops; + continue; + } + + rc = pcim_iomap_regions(pdev, 0x3 << base, + dev_driver_string(gdev)); + if (rc) { + dev_warn(gdev, + "failed to request/iomap BARs for port %d (errno=%d)\n", + i, rc); + if (rc == -EBUSY) + pcim_pin_device(pdev); + ap->ops = &ata_dummy_port_ops; + continue; + } + host->iomap = iomap = pcim_iomap_table(pdev); + + ap->ioaddr.cmd_addr = iomap[base]; + ap->ioaddr.altstatus_addr = + ap->ioaddr.ctl_addr = (void __iomem *) + ((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS); + ata_sff_std_ports(&ap->ioaddr); + + ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", + (unsigned long long)pci_resource_start(pdev, base), + (unsigned long long)pci_resource_start(pdev, base + 1)); + + mask |= 1 << i; + } + + if (!mask) { + dev_err(gdev, "no available native port\n"); + return -ENODEV; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ata_pci_sff_init_host); + +/** + * ata_pci_sff_prepare_host - helper to prepare PCI PIO-only SFF ATA host + * @pdev: target PCI device + * @ppi: array of port_info, must be enough for two ports + * @r_host: out argument for the initialized ATA host + * + * Helper to allocate PIO-only SFF ATA host for @pdev, acquire + * all PCI resources and initialize it accordingly in one go. + * + * LOCKING: + * Inherited from calling layer (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_pci_sff_prepare_host(struct pci_dev *pdev, + const struct ata_port_info * const *ppi, + struct ata_host **r_host) +{ + struct ata_host *host; + int rc; + + if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) + return -ENOMEM; + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2); + if (!host) { + dev_err(&pdev->dev, "failed to allocate ATA host\n"); + rc = -ENOMEM; + goto err_out; + } + + rc = ata_pci_sff_init_host(host); + if (rc) + goto err_out; + + devres_remove_group(&pdev->dev, NULL); + *r_host = host; + return 0; + +err_out: + devres_release_group(&pdev->dev, NULL); + return rc; +} +EXPORT_SYMBOL_GPL(ata_pci_sff_prepare_host); + +/** + * ata_pci_sff_activate_host - start SFF host, request IRQ and register it + * @host: target SFF ATA host + * @irq_handler: irq_handler used when requesting IRQ(s) + * @sht: scsi_host_template to use when registering the host + * + * This is the counterpart of ata_host_activate() for SFF ATA + * hosts. This separate helper is necessary because SFF hosts + * use two separate interrupts in legacy mode. + * + * LOCKING: + * Inherited from calling layer (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_pci_sff_activate_host(struct ata_host *host, + irq_handler_t irq_handler, + struct scsi_host_template *sht) +{ + struct device *dev = host->dev; + struct pci_dev *pdev = to_pci_dev(dev); + const char *drv_name = dev_driver_string(host->dev); + int legacy_mode = 0, rc; + + rc = ata_host_start(host); + if (rc) + return rc; + + if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { + u8 tmp8, mask; + + /* TODO: What if one channel is in native mode ... */ + pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); + mask = (1 << 2) | (1 << 0); + if ((tmp8 & mask) != mask) + legacy_mode = 1; + } + + if (!devres_open_group(dev, NULL, GFP_KERNEL)) + return -ENOMEM; + + if (!legacy_mode && pdev->irq) { + int i; + + rc = devm_request_irq(dev, pdev->irq, irq_handler, + IRQF_SHARED, drv_name, host); + if (rc) + goto out; + + for (i = 0; i < 2; i++) { + if (ata_port_is_dummy(host->ports[i])) + continue; + ata_port_desc(host->ports[i], "irq %d", pdev->irq); + } + } else if (legacy_mode) { + if (!ata_port_is_dummy(host->ports[0])) { + rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev), + irq_handler, IRQF_SHARED, + drv_name, host); + if (rc) + goto out; + + ata_port_desc(host->ports[0], "irq %d", + ATA_PRIMARY_IRQ(pdev)); + } + + if (!ata_port_is_dummy(host->ports[1])) { + rc = devm_request_irq(dev, ATA_SECONDARY_IRQ(pdev), + irq_handler, IRQF_SHARED, + drv_name, host); + if (rc) + goto out; + + ata_port_desc(host->ports[1], "irq %d", + ATA_SECONDARY_IRQ(pdev)); + } + } + + rc = ata_host_register(host, sht); +out: + if (rc == 0) + devres_remove_group(dev, NULL); + else + devres_release_group(dev, NULL); + + return rc; +} +EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host); + +static const struct ata_port_info *ata_sff_find_valid_pi( + const struct ata_port_info * const *ppi) +{ + int i; + + /* look up the first valid port_info */ + for (i = 0; i < 2 && ppi[i]; i++) + if (ppi[i]->port_ops != &ata_dummy_port_ops) + return ppi[i]; + + return NULL; +} + +static int ata_pci_init_one(struct pci_dev *pdev, + const struct ata_port_info * const *ppi, + struct scsi_host_template *sht, void *host_priv, + int hflags, bool bmdma) +{ + struct device *dev = &pdev->dev; + const struct ata_port_info *pi; + struct ata_host *host = NULL; + int rc; + + DPRINTK("ENTER\n"); + + pi = ata_sff_find_valid_pi(ppi); + if (!pi) { + dev_err(&pdev->dev, "no valid port_info specified\n"); + return -EINVAL; + } + + if (!devres_open_group(dev, NULL, GFP_KERNEL)) + return -ENOMEM; + + rc = pcim_enable_device(pdev); + if (rc) + goto out; + +#ifdef CONFIG_ATA_BMDMA + if (bmdma) + /* prepare and activate BMDMA host */ + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); + else +#endif + /* prepare and activate SFF host */ + rc = ata_pci_sff_prepare_host(pdev, ppi, &host); + if (rc) + goto out; + host->private_data = host_priv; + host->flags |= hflags; + +#ifdef CONFIG_ATA_BMDMA + if (bmdma) { + pci_set_master(pdev); + rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht); + } else +#endif + rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht); +out: + if (rc == 0) + devres_remove_group(&pdev->dev, NULL); + else + devres_release_group(&pdev->dev, NULL); + + return rc; +} + +/** + * ata_pci_sff_init_one - Initialize/register PIO-only PCI IDE controller + * @pdev: Controller to be initialized + * @ppi: array of port_info, must be enough for two ports + * @sht: scsi_host_template to use when registering the host + * @host_priv: host private_data + * @hflag: host flags + * + * This is a helper function which can be called from a driver's + * xxx_init_one() probe function if the hardware uses traditional + * IDE taskfile registers and is PIO only. + * + * ASSUMPTION: + * Nobody makes a single channel controller that appears solely as + * the secondary legacy port on PCI. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, negative on errno-based value on error. + */ +int ata_pci_sff_init_one(struct pci_dev *pdev, + const struct ata_port_info * const *ppi, + struct scsi_host_template *sht, void *host_priv, int hflag) +{ + return ata_pci_init_one(pdev, ppi, sht, host_priv, hflag, 0); +} +EXPORT_SYMBOL_GPL(ata_pci_sff_init_one); + +#endif /* CONFIG_PCI */ + +/* + * BMDMA support + */ + +#ifdef CONFIG_ATA_BMDMA + +const struct ata_port_operations ata_bmdma_port_ops = { + .inherits = &ata_sff_port_ops, + + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_bmdma_qc_prep, + .qc_issue = ata_bmdma_qc_issue, + + .sff_irq_clear = ata_bmdma_irq_clear, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .port_start = ata_bmdma_port_start, +}; +EXPORT_SYMBOL_GPL(ata_bmdma_port_ops); + +const struct ata_port_operations ata_bmdma32_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .sff_data_xfer = ata_sff_data_xfer32, + .port_start = ata_bmdma_port_start32, +}; +EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops); + +/** + * ata_bmdma_fill_sg - Fill PCI IDE PRD table + * @qc: Metadata associated with taskfile to be transferred + * + * Fill PCI IDE PRD (scatter-gather) table with segments + * associated with the current disk command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + */ +static void ata_bmdma_fill_sg(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_bmdma_prd *prd = ap->bmdma_prd; + struct scatterlist *sg; + unsigned int si, pi; + + pi = 0; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + u32 addr, offset; + u32 sg_len, len; + + /* determine if physical DMA addr spans 64K boundary. + * Note h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + addr = (u32) sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + while (sg_len) { + offset = addr & 0xffff; + len = sg_len; + if ((offset + sg_len) > 0x10000) + len = 0x10000 - offset; + + prd[pi].addr = cpu_to_le32(addr); + prd[pi].flags_len = cpu_to_le32(len & 0xffff); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); + + pi++; + sg_len -= len; + addr += len; + } + } + + prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); +} + +/** + * ata_bmdma_fill_sg_dumb - Fill PCI IDE PRD table + * @qc: Metadata associated with taskfile to be transferred + * + * Fill PCI IDE PRD (scatter-gather) table with segments + * associated with the current disk command. Perform the fill + * so that we avoid writing any length 64K records for + * controllers that don't follow the spec. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + */ +static void ata_bmdma_fill_sg_dumb(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_bmdma_prd *prd = ap->bmdma_prd; + struct scatterlist *sg; + unsigned int si, pi; + + pi = 0; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + u32 addr, offset; + u32 sg_len, len, blen; + + /* determine if physical DMA addr spans 64K boundary. + * Note h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + addr = (u32) sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + while (sg_len) { + offset = addr & 0xffff; + len = sg_len; + if ((offset + sg_len) > 0x10000) + len = 0x10000 - offset; + + blen = len & 0xffff; + prd[pi].addr = cpu_to_le32(addr); + if (blen == 0) { + /* Some PATA chipsets like the CS5530 can't + cope with 0x0000 meaning 64K as the spec + says */ + prd[pi].flags_len = cpu_to_le32(0x8000); + blen = 0x8000; + prd[++pi].addr = cpu_to_le32(addr + 0x8000); + } + prd[pi].flags_len = cpu_to_le32(blen); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); + + pi++; + sg_len -= len; + addr += len; + } + } + + prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); +} + +/** + * ata_bmdma_qc_prep - Prepare taskfile for submission + * @qc: Metadata associated with taskfile to be prepared + * + * Prepare ATA taskfile for submission. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_qc_prep(struct ata_queued_cmd *qc) +{ + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + ata_bmdma_fill_sg(qc); +} +EXPORT_SYMBOL_GPL(ata_bmdma_qc_prep); + +/** + * ata_bmdma_dumb_qc_prep - Prepare taskfile for submission + * @qc: Metadata associated with taskfile to be prepared + * + * Prepare ATA taskfile for submission. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc) +{ + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + ata_bmdma_fill_sg_dumb(qc); +} +EXPORT_SYMBOL_GPL(ata_bmdma_dumb_qc_prep); + +/** + * ata_bmdma_qc_issue - issue taskfile to a BMDMA controller + * @qc: command to issue to device + * + * This function issues a PIO, NODATA or DMA command to a + * SFF/BMDMA controller. PIO and NODATA are handled by + * ata_sff_qc_issue(). + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Zero on success, AC_ERR_* mask on failure + */ +unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_link *link = qc->dev->link; + + /* defer PIO handling to sff_qc_issue */ + if (!ata_is_dma(qc->tf.protocol)) + return ata_sff_qc_issue(qc); + + /* select the device */ + ata_dev_select(ap, qc->dev->devno, 1, 0); + + /* start the command */ + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING); + + ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */ + ap->ops->bmdma_setup(qc); /* set up bmdma */ + ap->ops->bmdma_start(qc); /* initiate bmdma */ + ap->hsm_task_state = HSM_ST_LAST; + break; + + case ATAPI_PROT_DMA: + WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING); + + ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */ + ap->ops->bmdma_setup(qc); /* set up bmdma */ + ap->hsm_task_state = HSM_ST_FIRST; + + /* send cdb by polling if no cdb interrupt */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + ata_sff_queue_pio_task(link, 0); + break; + + default: + WARN_ON(1); + return AC_ERR_SYSTEM; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ata_bmdma_qc_issue); + +/** + * ata_bmdma_port_intr - Handle BMDMA port interrupt + * @ap: Port on which interrupt arrived (possibly...) + * @qc: Taskfile currently active in engine + * + * Handle port interrupt for given queued command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * One if interrupt was handled, zero if not (shared irq). + */ +unsigned int ata_bmdma_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + struct ata_eh_info *ehi = &ap->link.eh_info; + u8 host_stat = 0; + bool bmdma_stopped = false; + unsigned int handled; + + if (ap->hsm_task_state == HSM_ST_LAST && ata_is_dma(qc->tf.protocol)) { + /* check status of DMA engine */ + host_stat = ap->ops->bmdma_status(ap); + VPRINTK("ata%u: host_stat 0x%X\n", ap->print_id, host_stat); + + /* if it's not our irq... */ + if (!(host_stat & ATA_DMA_INTR)) + return ata_sff_idle_irq(ap); + + /* before we do anything else, clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + bmdma_stopped = true; + + if (unlikely(host_stat & ATA_DMA_ERR)) { + /* error when transferring data to/from memory */ + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } + } + + handled = __ata_sff_port_intr(ap, qc, bmdma_stopped); + + if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol)) + ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat); + + return handled; +} +EXPORT_SYMBOL_GPL(ata_bmdma_port_intr); + +/** + * ata_bmdma_interrupt - Default BMDMA ATA host interrupt handler + * @irq: irq line (unused) + * @dev_instance: pointer to our ata_host information structure + * + * Default interrupt handler for PCI IDE devices. Calls + * ata_bmdma_port_intr() for each port that is not disabled. + * + * LOCKING: + * Obtains host lock during operation. + * + * RETURNS: + * IRQ_NONE or IRQ_HANDLED. + */ +irqreturn_t ata_bmdma_interrupt(int irq, void *dev_instance) +{ + return __ata_sff_interrupt(irq, dev_instance, ata_bmdma_port_intr); +} +EXPORT_SYMBOL_GPL(ata_bmdma_interrupt); + +/** + * ata_bmdma_error_handler - Stock error handler for BMDMA controller + * @ap: port to handle error for + * + * Stock error handler for BMDMA controller. It can handle both + * PATA and SATA controllers. Most BMDMA controllers should be + * able to use this EH as-is or with some added handling before + * and after. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_error_handler(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + unsigned long flags; + bool thaw = false; + + qc = __ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && !(qc->flags & ATA_QCFLAG_FAILED)) + qc = NULL; + + /* reset PIO HSM and stop DMA engine */ + spin_lock_irqsave(ap->lock, flags); + + if (qc && ata_is_dma(qc->tf.protocol)) { + u8 host_stat; + + host_stat = ap->ops->bmdma_status(ap); + + /* BMDMA controllers indicate host bus error by + * setting DMA_ERR bit and timing out. As it wasn't + * really a timeout event, adjust error mask and + * cancel frozen state. + */ + if (qc->err_mask == AC_ERR_TIMEOUT && (host_stat & ATA_DMA_ERR)) { + qc->err_mask = AC_ERR_HOST_BUS; + thaw = true; + } + + ap->ops->bmdma_stop(qc); + + /* if we're gonna thaw, make sure IRQ is clear */ + if (thaw) { + ap->ops->sff_check_status(ap); + if (ap->ops->sff_irq_clear) + ap->ops->sff_irq_clear(ap); + } + } + + spin_unlock_irqrestore(ap->lock, flags); + + if (thaw) + ata_eh_thaw_port(ap); + + ata_sff_error_handler(ap); +} +EXPORT_SYMBOL_GPL(ata_bmdma_error_handler); + +/** + * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for BMDMA + * @qc: internal command to clean up + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned long flags; + + if (ata_is_dma(qc->tf.protocol)) { + spin_lock_irqsave(ap->lock, flags); + ap->ops->bmdma_stop(qc); + spin_unlock_irqrestore(ap->lock, flags); + } +} +EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); + +/** + * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. + * @ap: Port associated with this ATA transaction. + * + * Clear interrupt and error flags in DMA status register. + * + * May be used as the irq_clear() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_irq_clear(struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.bmdma_addr; + + if (!mmio) + return; + + iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS); +} +EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear); + +/** + * ata_bmdma_setup - Set up PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u8 dmactl; + + /* load PRD table addr. */ + mb(); /* make sure PRD table writes are visible to controller */ + iowrite32(ap->bmdma_prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); + + /* specify data direction, triple-check start bit is clear */ + dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); + if (!rw) + dmactl |= ATA_DMA_WR; + iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} +EXPORT_SYMBOL_GPL(ata_bmdma_setup); + +/** + * ata_bmdma_start - Start a PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + u8 dmactl; + + /* start host DMA transaction */ + dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + + /* Strictly, one may wish to issue an ioread8() here, to + * flush the mmio write. However, control also passes + * to the hardware at this point, and it will interrupt + * us when we are to resume control. So, in effect, + * we don't care when the mmio write flushes. + * Further, a read of the DMA status register _immediately_ + * following the write may not be what certain flaky hardware + * is expected, so I think it is best to not add a readb() + * without first all the MMIO ATA cards/mobos. + * Or maybe I'm just being paranoid. + * + * FIXME: The posting of this write means I/O starts are + * unnecessarily delayed for MMIO + */ +} +EXPORT_SYMBOL_GPL(ata_bmdma_start); + +/** + * ata_bmdma_stop - Stop PCI IDE BMDMA transfer + * @qc: Command we are ending DMA for + * + * Clears the ATA_DMA_START flag in the dma control register + * + * May be used as the bmdma_stop() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *mmio = ap->ioaddr.bmdma_addr; + + /* clear start/stop bit */ + iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ATA_DMA_START, + mmio + ATA_DMA_CMD); + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_sff_dma_pause(ap); +} +EXPORT_SYMBOL_GPL(ata_bmdma_stop); + +/** + * ata_bmdma_status - Read PCI IDE BMDMA status + * @ap: Port associated with this ATA transaction. + * + * Read and return BMDMA status register. + * + * May be used as the bmdma_status() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +u8 ata_bmdma_status(struct ata_port *ap) +{ + return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); +} +EXPORT_SYMBOL_GPL(ata_bmdma_status); + + +/** + * ata_bmdma_port_start - Set port up for bmdma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +int ata_bmdma_port_start(struct ata_port *ap) +{ + if (ap->mwdma_mask || ap->udma_mask) { + ap->bmdma_prd = + dmam_alloc_coherent(ap->host->dev, ATA_PRD_TBL_SZ, + &ap->bmdma_prd_dma, GFP_KERNEL); + if (!ap->bmdma_prd) + return -ENOMEM; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ata_bmdma_port_start); + +/** + * ata_bmdma_port_start32 - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Enables 32bit PIO and allocates space for PRD + * table. + * + * May be used as the port_start() entry in ata_port_operations for + * devices that are capable of 32bit PIO. + * + * LOCKING: + * Inherited from caller. + */ +int ata_bmdma_port_start32(struct ata_port *ap) +{ + ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE; + return ata_bmdma_port_start(ap); +} +EXPORT_SYMBOL_GPL(ata_bmdma_port_start32); + +#ifdef CONFIG_PCI + +/** + * ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex + * @pdev: PCI device + * + * Some PCI ATA devices report simplex mode but in fact can be told to + * enter non simplex mode. This implements the necessary logic to + * perform the task on such devices. Calling it on other devices will + * have -undefined- behaviour. + */ +int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev) +{ + unsigned long bmdma = pci_resource_start(pdev, 4); + u8 simplex; + + if (bmdma == 0) + return -ENOENT; + + simplex = inb(bmdma + 0x02); + outb(simplex & 0x60, bmdma + 0x02); + simplex = inb(bmdma + 0x02); + if (simplex & 0x80) + return -EOPNOTSUPP; + return 0; +} +EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex); + +static void ata_bmdma_nodma(struct ata_host *host, const char *reason) +{ + int i; + + dev_err(host->dev, "BMDMA: %s, falling back to PIO\n", reason); + + for (i = 0; i < 2; i++) { + host->ports[i]->mwdma_mask = 0; + host->ports[i]->udma_mask = 0; + } +} + +/** + * ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host + * @host: target ATA host + * + * Acquire PCI BMDMA resources and initialize @host accordingly. + * + * LOCKING: + * Inherited from calling layer (may sleep). + */ +void ata_pci_bmdma_init(struct ata_host *host) +{ + struct device *gdev = host->dev; + struct pci_dev *pdev = to_pci_dev(gdev); + int i, rc; + + /* No BAR4 allocation: No DMA */ + if (pci_resource_start(pdev, 4) == 0) { + ata_bmdma_nodma(host, "BAR4 is zero"); + return; + } + + /* + * Some controllers require BMDMA region to be initialized + * even if DMA is not in use to clear IRQ status via + * ->sff_irq_clear method. Try to initialize bmdma_addr + * regardless of dma masks. + */ + rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + ata_bmdma_nodma(host, "failed to set dma mask"); + if (!rc) { + rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + ata_bmdma_nodma(host, + "failed to set consistent dma mask"); + } + + /* request and iomap DMA region */ + rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev)); + if (rc) { + ata_bmdma_nodma(host, "failed to request/iomap BAR4"); + return; + } + host->iomap = pcim_iomap_table(pdev); + + for (i = 0; i < 2; i++) { + struct ata_port *ap = host->ports[i]; + void __iomem *bmdma = host->iomap[4] + 8 * i; + + if (ata_port_is_dummy(ap)) + continue; + + ap->ioaddr.bmdma_addr = bmdma; + if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) && + (ioread8(bmdma + 2) & 0x80)) + host->flags |= ATA_HOST_SIMPLEX; + + ata_port_desc(ap, "bmdma 0x%llx", + (unsigned long long)pci_resource_start(pdev, 4) + 8 * i); + } +} +EXPORT_SYMBOL_GPL(ata_pci_bmdma_init); + +/** + * ata_pci_bmdma_prepare_host - helper to prepare PCI BMDMA ATA host + * @pdev: target PCI device + * @ppi: array of port_info, must be enough for two ports + * @r_host: out argument for the initialized ATA host + * + * Helper to allocate BMDMA ATA host for @pdev, acquire all PCI + * resources and initialize it accordingly in one go. + * + * LOCKING: + * Inherited from calling layer (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_pci_bmdma_prepare_host(struct pci_dev *pdev, + const struct ata_port_info * const * ppi, + struct ata_host **r_host) +{ + int rc; + + rc = ata_pci_sff_prepare_host(pdev, ppi, r_host); + if (rc) + return rc; + + ata_pci_bmdma_init(*r_host); + return 0; +} +EXPORT_SYMBOL_GPL(ata_pci_bmdma_prepare_host); + +/** + * ata_pci_bmdma_init_one - Initialize/register BMDMA PCI IDE controller + * @pdev: Controller to be initialized + * @ppi: array of port_info, must be enough for two ports + * @sht: scsi_host_template to use when registering the host + * @host_priv: host private_data + * @hflags: host flags + * + * This function is similar to ata_pci_sff_init_one() but also + * takes care of BMDMA initialization. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, negative on errno-based value on error. + */ +int ata_pci_bmdma_init_one(struct pci_dev *pdev, + const struct ata_port_info * const * ppi, + struct scsi_host_template *sht, void *host_priv, + int hflags) +{ + return ata_pci_init_one(pdev, ppi, sht, host_priv, hflags, 1); +} +EXPORT_SYMBOL_GPL(ata_pci_bmdma_init_one); + +#endif /* CONFIG_PCI */ +#endif /* CONFIG_ATA_BMDMA */ + +/** + * ata_sff_port_init - Initialize SFF/BMDMA ATA port + * @ap: Port to initialize + * + * Called on port allocation to initialize SFF/BMDMA specific + * fields. + * + * LOCKING: + * None. + */ +void ata_sff_port_init(struct ata_port *ap) +{ + INIT_DELAYED_WORK(&ap->sff_pio_task, ata_sff_pio_task); + ap->ctl = ATA_DEVCTL_OBS; + ap->last_ctl = 0xFF; +} + +int __init ata_sff_init(void) +{ + ata_sff_wq = alloc_workqueue("ata_sff", WQ_MEM_RECLAIM, WQ_MAX_ACTIVE); + if (!ata_sff_wq) + return -ENOMEM; + + return 0; +} + +void ata_sff_exit(void) +{ + destroy_workqueue(ata_sff_wq); +} diff --git a/drivers/ata/libata-trace.c b/drivers/ata/libata-trace.c new file mode 100644 index 000000000..fd30b8c10 --- /dev/null +++ b/drivers/ata/libata-trace.c @@ -0,0 +1,151 @@ +/* + * libata-trace.c - trace functions for libata + * + * Copyright 2015 Hannes Reinecke + * Copyright 2015 SUSE Linux GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +const char * +libata_trace_parse_status(struct trace_seq *p, unsigned char status) +{ + const char *ret = trace_seq_buffer_ptr(p); + + trace_seq_printf(p, "{ "); + if (status & ATA_BUSY) + trace_seq_printf(p, "BUSY "); + if (status & ATA_DRDY) + trace_seq_printf(p, "DRDY "); + if (status & ATA_DF) + trace_seq_printf(p, "DF "); + if (status & ATA_DSC) + trace_seq_printf(p, "DSC "); + if (status & ATA_DRQ) + trace_seq_printf(p, "DRQ "); + if (status & ATA_CORR) + trace_seq_printf(p, "CORR "); + if (status & ATA_SENSE) + trace_seq_printf(p, "SENSE "); + if (status & ATA_ERR) + trace_seq_printf(p, "ERR "); + trace_seq_putc(p, '}'); + trace_seq_putc(p, 0); + + return ret; +} + +const char * +libata_trace_parse_eh_action(struct trace_seq *p, unsigned int eh_action) +{ + const char *ret = trace_seq_buffer_ptr(p); + + trace_seq_printf(p, "%x", eh_action); + if (eh_action) { + trace_seq_printf(p, "{ "); + if (eh_action & ATA_EH_REVALIDATE) + trace_seq_printf(p, "REVALIDATE "); + if (eh_action & (ATA_EH_SOFTRESET | ATA_EH_HARDRESET)) + trace_seq_printf(p, "RESET "); + else if (eh_action & ATA_EH_SOFTRESET) + trace_seq_printf(p, "SOFTRESET "); + else if (eh_action & ATA_EH_HARDRESET) + trace_seq_printf(p, "HARDRESET "); + if (eh_action & ATA_EH_ENABLE_LINK) + trace_seq_printf(p, "ENABLE_LINK "); + if (eh_action & ATA_EH_PARK) + trace_seq_printf(p, "PARK "); + trace_seq_putc(p, '}'); + } + trace_seq_putc(p, 0); + + return ret; +} + +const char * +libata_trace_parse_eh_err_mask(struct trace_seq *p, unsigned int eh_err_mask) +{ + const char *ret = trace_seq_buffer_ptr(p); + + trace_seq_printf(p, "%x", eh_err_mask); + if (eh_err_mask) { + trace_seq_printf(p, "{ "); + if (eh_err_mask & AC_ERR_DEV) + trace_seq_printf(p, "DEV "); + if (eh_err_mask & AC_ERR_HSM) + trace_seq_printf(p, "HSM "); + if (eh_err_mask & AC_ERR_TIMEOUT) + trace_seq_printf(p, "TIMEOUT "); + if (eh_err_mask & AC_ERR_MEDIA) + trace_seq_printf(p, "MEDIA "); + if (eh_err_mask & AC_ERR_ATA_BUS) + trace_seq_printf(p, "ATA_BUS "); + if (eh_err_mask & AC_ERR_HOST_BUS) + trace_seq_printf(p, "HOST_BUS "); + if (eh_err_mask & AC_ERR_SYSTEM) + trace_seq_printf(p, "SYSTEM "); + if (eh_err_mask & AC_ERR_INVALID) + trace_seq_printf(p, "INVALID "); + if (eh_err_mask & AC_ERR_OTHER) + trace_seq_printf(p, "OTHER "); + if (eh_err_mask & AC_ERR_NODEV_HINT) + trace_seq_printf(p, "NODEV_HINT "); + if (eh_err_mask & AC_ERR_NCQ) + trace_seq_printf(p, "NCQ "); + trace_seq_putc(p, '}'); + } + trace_seq_putc(p, 0); + + return ret; +} + +const char * +libata_trace_parse_qc_flags(struct trace_seq *p, unsigned int qc_flags) +{ + const char *ret = trace_seq_buffer_ptr(p); + + trace_seq_printf(p, "%x", qc_flags); + if (qc_flags) { + trace_seq_printf(p, "{ "); + if (qc_flags & ATA_QCFLAG_ACTIVE) + trace_seq_printf(p, "ACTIVE "); + if (qc_flags & ATA_QCFLAG_DMAMAP) + trace_seq_printf(p, "DMAMAP "); + if (qc_flags & ATA_QCFLAG_IO) + trace_seq_printf(p, "IO "); + if (qc_flags & ATA_QCFLAG_RESULT_TF) + trace_seq_printf(p, "RESULT_TF "); + if (qc_flags & ATA_QCFLAG_CLEAR_EXCL) + trace_seq_printf(p, "CLEAR_EXCL "); + if (qc_flags & ATA_QCFLAG_QUIET) + trace_seq_printf(p, "QUIET "); + if (qc_flags & ATA_QCFLAG_RETRY) + trace_seq_printf(p, "RETRY "); + if (qc_flags & ATA_QCFLAG_FAILED) + trace_seq_printf(p, "FAILED "); + if (qc_flags & ATA_QCFLAG_SENSE_VALID) + trace_seq_printf(p, "SENSE_VALID "); + if (qc_flags & ATA_QCFLAG_EH_SCHEDULED) + trace_seq_printf(p, "EH_SCHEDULED "); + trace_seq_putc(p, '}'); + } + trace_seq_putc(p, 0); + + return ret; +} diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c new file mode 100644 index 000000000..e2d949729 --- /dev/null +++ b/drivers/ata/libata-transport.c @@ -0,0 +1,810 @@ +/* + * Copyright 2008 ioogle, Inc. All rights reserved. + * Released under GPL v2. + * + * Libata transport class. + * + * The ATA transport class contains common code to deal with ATA HBAs, + * an approximated representation of ATA topologies in the driver model, + * and various sysfs attributes to expose these topologies and management + * interfaces to user-space. + * + * There are 3 objects defined in in this class: + * - ata_port + * - ata_link + * - ata_device + * Each port has a link object. Each link can have up to two devices for PATA + * and generally one for SATA. + * If there is SATA port multiplier [PMP], 15 additional ata_link object are + * created. + * + * These objects are created when the ata host is initialized and when a PMP is + * found. They are removed only when the HBA is removed, cleaned before the + * error handler runs. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "libata.h" +#include "libata-transport.h" + +#define ATA_PORT_ATTRS 3 +#define ATA_LINK_ATTRS 3 +#define ATA_DEV_ATTRS 9 + +struct scsi_transport_template; +struct scsi_transport_template *ata_scsi_transport_template; + +struct ata_internal { + struct scsi_transport_template t; + + struct device_attribute private_port_attrs[ATA_PORT_ATTRS]; + struct device_attribute private_link_attrs[ATA_LINK_ATTRS]; + struct device_attribute private_dev_attrs[ATA_DEV_ATTRS]; + + struct transport_container link_attr_cont; + struct transport_container dev_attr_cont; + + /* + * The array of null terminated pointers to attributes + * needed by scsi_sysfs.c + */ + struct device_attribute *link_attrs[ATA_LINK_ATTRS + 1]; + struct device_attribute *port_attrs[ATA_PORT_ATTRS + 1]; + struct device_attribute *dev_attrs[ATA_DEV_ATTRS + 1]; +}; +#define to_ata_internal(tmpl) container_of(tmpl, struct ata_internal, t) + + +#define tdev_to_device(d) \ + container_of((d), struct ata_device, tdev) +#define transport_class_to_dev(dev) \ + tdev_to_device((dev)->parent) + +#define tdev_to_link(d) \ + container_of((d), struct ata_link, tdev) +#define transport_class_to_link(dev) \ + tdev_to_link((dev)->parent) + +#define tdev_to_port(d) \ + container_of((d), struct ata_port, tdev) +#define transport_class_to_port(dev) \ + tdev_to_port((dev)->parent) + + +/* Device objects are always created whit link objects */ +static int ata_tdev_add(struct ata_device *dev); +static void ata_tdev_delete(struct ata_device *dev); + + +/* + * Hack to allow attributes of the same name in different objects. + */ +#define ATA_DEVICE_ATTR(_prefix,_name,_mode,_show,_store) \ + struct device_attribute device_attr_##_prefix##_##_name = \ + __ATTR(_name,_mode,_show,_store) + +#define ata_bitfield_name_match(title, table) \ +static ssize_t \ +get_ata_##title##_names(u32 table_key, char *buf) \ +{ \ + char *prefix = ""; \ + ssize_t len = 0; \ + int i; \ + \ + for (i = 0; i < ARRAY_SIZE(table); i++) { \ + if (table[i].value & table_key) { \ + len += sprintf(buf + len, "%s%s", \ + prefix, table[i].name); \ + prefix = ", "; \ + } \ + } \ + len += sprintf(buf + len, "\n"); \ + return len; \ +} + +#define ata_bitfield_name_search(title, table) \ +static ssize_t \ +get_ata_##title##_names(u32 table_key, char *buf) \ +{ \ + ssize_t len = 0; \ + int i; \ + \ + for (i = 0; i < ARRAY_SIZE(table); i++) { \ + if (table[i].value == table_key) { \ + len += sprintf(buf + len, "%s", \ + table[i].name); \ + break; \ + } \ + } \ + len += sprintf(buf + len, "\n"); \ + return len; \ +} + +static struct { + u32 value; + char *name; +} ata_class_names[] = { + { ATA_DEV_UNKNOWN, "unknown" }, + { ATA_DEV_ATA, "ata" }, + { ATA_DEV_ATA_UNSUP, "ata" }, + { ATA_DEV_ATAPI, "atapi" }, + { ATA_DEV_ATAPI_UNSUP, "atapi" }, + { ATA_DEV_PMP, "pmp" }, + { ATA_DEV_PMP_UNSUP, "pmp" }, + { ATA_DEV_SEMB, "semb" }, + { ATA_DEV_SEMB_UNSUP, "semb" }, + { ATA_DEV_ZAC, "zac" }, + { ATA_DEV_NONE, "none" } +}; +ata_bitfield_name_search(class, ata_class_names) + + +static struct { + u32 value; + char *name; +} ata_err_names[] = { + { AC_ERR_DEV, "DeviceError" }, + { AC_ERR_HSM, "HostStateMachineError" }, + { AC_ERR_TIMEOUT, "Timeout" }, + { AC_ERR_MEDIA, "MediaError" }, + { AC_ERR_ATA_BUS, "BusError" }, + { AC_ERR_HOST_BUS, "HostBusError" }, + { AC_ERR_SYSTEM, "SystemError" }, + { AC_ERR_INVALID, "InvalidArg" }, + { AC_ERR_OTHER, "Unknown" }, + { AC_ERR_NODEV_HINT, "NoDeviceHint" }, + { AC_ERR_NCQ, "NCQError" } +}; +ata_bitfield_name_match(err, ata_err_names) + +static struct { + u32 value; + char *name; +} ata_xfer_names[] = { + { XFER_UDMA_7, "XFER_UDMA_7" }, + { XFER_UDMA_6, "XFER_UDMA_6" }, + { XFER_UDMA_5, "XFER_UDMA_5" }, + { XFER_UDMA_4, "XFER_UDMA_4" }, + { XFER_UDMA_3, "XFER_UDMA_3" }, + { XFER_UDMA_2, "XFER_UDMA_2" }, + { XFER_UDMA_1, "XFER_UDMA_1" }, + { XFER_UDMA_0, "XFER_UDMA_0" }, + { XFER_MW_DMA_4, "XFER_MW_DMA_4" }, + { XFER_MW_DMA_3, "XFER_MW_DMA_3" }, + { XFER_MW_DMA_2, "XFER_MW_DMA_2" }, + { XFER_MW_DMA_1, "XFER_MW_DMA_1" }, + { XFER_MW_DMA_0, "XFER_MW_DMA_0" }, + { XFER_SW_DMA_2, "XFER_SW_DMA_2" }, + { XFER_SW_DMA_1, "XFER_SW_DMA_1" }, + { XFER_SW_DMA_0, "XFER_SW_DMA_0" }, + { XFER_PIO_6, "XFER_PIO_6" }, + { XFER_PIO_5, "XFER_PIO_5" }, + { XFER_PIO_4, "XFER_PIO_4" }, + { XFER_PIO_3, "XFER_PIO_3" }, + { XFER_PIO_2, "XFER_PIO_2" }, + { XFER_PIO_1, "XFER_PIO_1" }, + { XFER_PIO_0, "XFER_PIO_0" }, + { XFER_PIO_SLOW, "XFER_PIO_SLOW" } +}; +ata_bitfield_name_match(xfer,ata_xfer_names) + +/* + * ATA Port attributes + */ +#define ata_port_show_simple(field, name, format_string, cast) \ +static ssize_t \ +show_ata_port_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct ata_port *ap = transport_class_to_port(dev); \ + \ + return snprintf(buf, 20, format_string, cast ap->field); \ +} + +#define ata_port_simple_attr(field, name, format_string, type) \ + ata_port_show_simple(field, name, format_string, (type)) \ +static DEVICE_ATTR(name, S_IRUGO, show_ata_port_##name, NULL) + +ata_port_simple_attr(nr_pmp_links, nr_pmp_links, "%d\n", int); +ata_port_simple_attr(stats.idle_irq, idle_irq, "%ld\n", unsigned long); +ata_port_simple_attr(local_port_no, port_no, "%u\n", unsigned int); + +static DECLARE_TRANSPORT_CLASS(ata_port_class, + "ata_port", NULL, NULL, NULL); + +static void ata_tport_release(struct device *dev) +{ + put_device(dev->parent); +} + +/** + * ata_is_port -- check if a struct device represents a ATA port + * @dev: device to check + * + * Returns: + * %1 if the device represents a ATA Port, %0 else + */ +static int ata_is_port(const struct device *dev) +{ + return dev->release == ata_tport_release; +} + +static int ata_tport_match(struct attribute_container *cont, + struct device *dev) +{ + if (!ata_is_port(dev)) + return 0; + return &ata_scsi_transport_template->host_attrs.ac == cont; +} + +/** + * ata_tport_delete -- remove ATA PORT + * @port: ATA PORT to remove + * + * Removes the specified ATA PORT. Remove the associated link as well. + */ +void ata_tport_delete(struct ata_port *ap) +{ + struct device *dev = &ap->tdev; + + ata_tlink_delete(&ap->link); + + transport_remove_device(dev); + device_del(dev); + transport_destroy_device(dev); + put_device(dev); +} + +/** ata_tport_add - initialize a transport ATA port structure + * + * @parent: parent device + * @ap: existing ata_port structure + * + * Initialize a ATA port structure for sysfs. It will be added to the device + * tree below the device specified by @parent which could be a PCI device. + * + * Returns %0 on success + */ +int ata_tport_add(struct device *parent, + struct ata_port *ap) +{ + int error; + struct device *dev = &ap->tdev; + + device_initialize(dev); + dev->type = &ata_port_type; + + dev->parent = get_device(parent); + dev->release = ata_tport_release; + dev_set_name(dev, "ata%d", ap->print_id); + transport_setup_device(dev); + ata_acpi_bind_port(ap); + error = device_add(dev); + if (error) { + goto tport_err; + } + + device_enable_async_suspend(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + pm_runtime_forbid(dev); + + transport_add_device(dev); + transport_configure_device(dev); + + error = ata_tlink_add(&ap->link); + if (error) { + goto tport_link_err; + } + return 0; + + tport_link_err: + transport_remove_device(dev); + device_del(dev); + + tport_err: + transport_destroy_device(dev); + put_device(dev); + return error; +} + + +/* + * ATA link attributes + */ +static int noop(int x) { return x; } + +#define ata_link_show_linkspeed(field, format) \ +static ssize_t \ +show_ata_link_##field(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct ata_link *link = transport_class_to_link(dev); \ + \ + return sprintf(buf, "%s\n", sata_spd_string(format(link->field))); \ +} + +#define ata_link_linkspeed_attr(field, format) \ + ata_link_show_linkspeed(field, format) \ +static DEVICE_ATTR(field, S_IRUGO, show_ata_link_##field, NULL) + +ata_link_linkspeed_attr(hw_sata_spd_limit, fls); +ata_link_linkspeed_attr(sata_spd_limit, fls); +ata_link_linkspeed_attr(sata_spd, noop); + + +static DECLARE_TRANSPORT_CLASS(ata_link_class, + "ata_link", NULL, NULL, NULL); + +static void ata_tlink_release(struct device *dev) +{ + put_device(dev->parent); +} + +/** + * ata_is_link -- check if a struct device represents a ATA link + * @dev: device to check + * + * Returns: + * %1 if the device represents a ATA link, %0 else + */ +static int ata_is_link(const struct device *dev) +{ + return dev->release == ata_tlink_release; +} + +static int ata_tlink_match(struct attribute_container *cont, + struct device *dev) +{ + struct ata_internal* i = to_ata_internal(ata_scsi_transport_template); + if (!ata_is_link(dev)) + return 0; + return &i->link_attr_cont.ac == cont; +} + +/** + * ata_tlink_delete -- remove ATA LINK + * @port: ATA LINK to remove + * + * Removes the specified ATA LINK. remove associated ATA device(s) as well. + */ +void ata_tlink_delete(struct ata_link *link) +{ + struct device *dev = &link->tdev; + struct ata_device *ata_dev; + + ata_for_each_dev(ata_dev, link, ALL) { + ata_tdev_delete(ata_dev); + } + + transport_remove_device(dev); + device_del(dev); + transport_destroy_device(dev); + put_device(dev); +} + +/** + * ata_tlink_add -- initialize a transport ATA link structure + * @link: allocated ata_link structure. + * + * Initialize an ATA LINK structure for sysfs. It will be added in the + * device tree below the ATA PORT it belongs to. + * + * Returns %0 on success + */ +int ata_tlink_add(struct ata_link *link) +{ + struct device *dev = &link->tdev; + struct ata_port *ap = link->ap; + struct ata_device *ata_dev; + int error; + + device_initialize(dev); + dev->parent = get_device(&ap->tdev); + dev->release = ata_tlink_release; + if (ata_is_host_link(link)) + dev_set_name(dev, "link%d", ap->print_id); + else + dev_set_name(dev, "link%d.%d", ap->print_id, link->pmp); + + transport_setup_device(dev); + + error = device_add(dev); + if (error) { + goto tlink_err; + } + + transport_add_device(dev); + transport_configure_device(dev); + + ata_for_each_dev(ata_dev, link, ALL) { + error = ata_tdev_add(ata_dev); + if (error) { + goto tlink_dev_err; + } + } + return 0; + tlink_dev_err: + while (--ata_dev >= link->device) { + ata_tdev_delete(ata_dev); + } + transport_remove_device(dev); + device_del(dev); + tlink_err: + transport_destroy_device(dev); + put_device(dev); + return error; +} + +/* + * ATA device attributes + */ + +#define ata_dev_show_class(title, field) \ +static ssize_t \ +show_ata_dev_##field(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct ata_device *ata_dev = transport_class_to_dev(dev); \ + \ + return get_ata_##title##_names(ata_dev->field, buf); \ +} + +#define ata_dev_attr(title, field) \ + ata_dev_show_class(title, field) \ +static DEVICE_ATTR(field, S_IRUGO, show_ata_dev_##field, NULL) + +ata_dev_attr(class, class); +ata_dev_attr(xfer, pio_mode); +ata_dev_attr(xfer, dma_mode); +ata_dev_attr(xfer, xfer_mode); + + +#define ata_dev_show_simple(field, format_string, cast) \ +static ssize_t \ +show_ata_dev_##field(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct ata_device *ata_dev = transport_class_to_dev(dev); \ + \ + return snprintf(buf, 20, format_string, cast ata_dev->field); \ +} + +#define ata_dev_simple_attr(field, format_string, type) \ + ata_dev_show_simple(field, format_string, (type)) \ +static DEVICE_ATTR(field, S_IRUGO, \ + show_ata_dev_##field, NULL) + +ata_dev_simple_attr(spdn_cnt, "%d\n", int); + +struct ata_show_ering_arg { + char* buf; + int written; +}; + +static int ata_show_ering(struct ata_ering_entry *ent, void *void_arg) +{ + struct ata_show_ering_arg* arg = void_arg; + struct timespec time; + + jiffies_to_timespec(ent->timestamp,&time); + arg->written += sprintf(arg->buf + arg->written, + "[%5lu.%06lu]", + time.tv_sec, time.tv_nsec); + arg->written += get_ata_err_names(ent->err_mask, + arg->buf + arg->written); + return 0; +} + +static ssize_t +show_ata_dev_ering(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ata_device *ata_dev = transport_class_to_dev(dev); + struct ata_show_ering_arg arg = { buf, 0 }; + + ata_ering_map(&ata_dev->ering, ata_show_ering, &arg); + return arg.written; +} + + +static DEVICE_ATTR(ering, S_IRUGO, show_ata_dev_ering, NULL); + +static ssize_t +show_ata_dev_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ata_device *ata_dev = transport_class_to_dev(dev); + int written = 0, i = 0; + + if (ata_dev->class == ATA_DEV_PMP) + return 0; + for(i=0;iid[i], + ((i+1) & 7) ? ' ' : '\n'); + } + return written; +} + +static DEVICE_ATTR(id, S_IRUGO, show_ata_dev_id, NULL); + +static ssize_t +show_ata_dev_gscr(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ata_device *ata_dev = transport_class_to_dev(dev); + int written = 0, i = 0; + + if (ata_dev->class != ATA_DEV_PMP) + return 0; + for(i=0;igscr[i], + ((i+1) & 3) ? ' ' : '\n'); + } + if (SATA_PMP_GSCR_DWORDS & 3) + buf[written-1] = '\n'; + return written; +} + +static DEVICE_ATTR(gscr, S_IRUGO, show_ata_dev_gscr, NULL); + +static ssize_t +show_ata_dev_trim(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ata_device *ata_dev = transport_class_to_dev(dev); + unsigned char *mode; + + if (!ata_id_has_trim(ata_dev->id)) + mode = "unsupported"; + else if (ata_dev->horkage & ATA_HORKAGE_NOTRIM) + mode = "forced_unsupported"; + else if (ata_dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM) + mode = "forced_unqueued"; + else if (ata_fpdma_dsm_supported(ata_dev)) + mode = "queued"; + else + mode = "unqueued"; + + return snprintf(buf, 20, "%s\n", mode); +} + +static DEVICE_ATTR(trim, S_IRUGO, show_ata_dev_trim, NULL); + +static DECLARE_TRANSPORT_CLASS(ata_dev_class, + "ata_device", NULL, NULL, NULL); + +static void ata_tdev_release(struct device *dev) +{ + put_device(dev->parent); +} + +/** + * ata_is_ata_dev -- check if a struct device represents a ATA device + * @dev: device to check + * + * Returns: + * %1 if the device represents a ATA device, %0 else + */ +static int ata_is_ata_dev(const struct device *dev) +{ + return dev->release == ata_tdev_release; +} + +static int ata_tdev_match(struct attribute_container *cont, + struct device *dev) +{ + struct ata_internal* i = to_ata_internal(ata_scsi_transport_template); + if (!ata_is_ata_dev(dev)) + return 0; + return &i->dev_attr_cont.ac == cont; +} + +/** + * ata_tdev_free -- free a ATA LINK + * @dev: ATA PHY to free + * + * Frees the specified ATA PHY. + * + * Note: + * This function must only be called on a PHY that has not + * successfully been added using ata_tdev_add(). + */ +static void ata_tdev_free(struct ata_device *dev) +{ + transport_destroy_device(&dev->tdev); + put_device(&dev->tdev); +} + +/** + * ata_tdev_delete -- remove ATA device + * @port: ATA PORT to remove + * + * Removes the specified ATA device. + */ +static void ata_tdev_delete(struct ata_device *ata_dev) +{ + struct device *dev = &ata_dev->tdev; + + transport_remove_device(dev); + device_del(dev); + ata_tdev_free(ata_dev); +} + + +/** + * ata_tdev_add -- initialize a transport ATA device structure. + * @ata_dev: ata_dev structure. + * + * Initialize an ATA device structure for sysfs. It will be added in the + * device tree below the ATA LINK device it belongs to. + * + * Returns %0 on success + */ +static int ata_tdev_add(struct ata_device *ata_dev) +{ + struct device *dev = &ata_dev->tdev; + struct ata_link *link = ata_dev->link; + struct ata_port *ap = link->ap; + int error; + + device_initialize(dev); + dev->parent = get_device(&link->tdev); + dev->release = ata_tdev_release; + if (ata_is_host_link(link)) + dev_set_name(dev, "dev%d.%d", ap->print_id,ata_dev->devno); + else + dev_set_name(dev, "dev%d.%d.0", ap->print_id, link->pmp); + + transport_setup_device(dev); + ata_acpi_bind_dev(ata_dev); + error = device_add(dev); + if (error) { + ata_tdev_free(ata_dev); + return error; + } + + transport_add_device(dev); + transport_configure_device(dev); + return 0; +} + + +/* + * Setup / Teardown code + */ + +#define SETUP_TEMPLATE(attrb, field, perm, test) \ + i->private_##attrb[count] = dev_attr_##field; \ + i->private_##attrb[count].attr.mode = perm; \ + i->attrb[count] = &i->private_##attrb[count]; \ + if (test) \ + count++ + +#define SETUP_LINK_ATTRIBUTE(field) \ + SETUP_TEMPLATE(link_attrs, field, S_IRUGO, 1) + +#define SETUP_PORT_ATTRIBUTE(field) \ + SETUP_TEMPLATE(port_attrs, field, S_IRUGO, 1) + +#define SETUP_DEV_ATTRIBUTE(field) \ + SETUP_TEMPLATE(dev_attrs, field, S_IRUGO, 1) + +/** + * ata_attach_transport -- instantiate ATA transport template + */ +struct scsi_transport_template *ata_attach_transport(void) +{ + struct ata_internal *i; + int count; + + i = kzalloc(sizeof(struct ata_internal), GFP_KERNEL); + if (!i) + return NULL; + + i->t.eh_strategy_handler = ata_scsi_error; + i->t.eh_timed_out = ata_scsi_timed_out; + i->t.user_scan = ata_scsi_user_scan; + + i->t.host_attrs.ac.attrs = &i->port_attrs[0]; + i->t.host_attrs.ac.class = &ata_port_class.class; + i->t.host_attrs.ac.match = ata_tport_match; + transport_container_register(&i->t.host_attrs); + + i->link_attr_cont.ac.class = &ata_link_class.class; + i->link_attr_cont.ac.attrs = &i->link_attrs[0]; + i->link_attr_cont.ac.match = ata_tlink_match; + transport_container_register(&i->link_attr_cont); + + i->dev_attr_cont.ac.class = &ata_dev_class.class; + i->dev_attr_cont.ac.attrs = &i->dev_attrs[0]; + i->dev_attr_cont.ac.match = ata_tdev_match; + transport_container_register(&i->dev_attr_cont); + + count = 0; + SETUP_PORT_ATTRIBUTE(nr_pmp_links); + SETUP_PORT_ATTRIBUTE(idle_irq); + SETUP_PORT_ATTRIBUTE(port_no); + BUG_ON(count > ATA_PORT_ATTRS); + i->port_attrs[count] = NULL; + + count = 0; + SETUP_LINK_ATTRIBUTE(hw_sata_spd_limit); + SETUP_LINK_ATTRIBUTE(sata_spd_limit); + SETUP_LINK_ATTRIBUTE(sata_spd); + BUG_ON(count > ATA_LINK_ATTRS); + i->link_attrs[count] = NULL; + + count = 0; + SETUP_DEV_ATTRIBUTE(class); + SETUP_DEV_ATTRIBUTE(pio_mode); + SETUP_DEV_ATTRIBUTE(dma_mode); + SETUP_DEV_ATTRIBUTE(xfer_mode); + SETUP_DEV_ATTRIBUTE(spdn_cnt); + SETUP_DEV_ATTRIBUTE(ering); + SETUP_DEV_ATTRIBUTE(id); + SETUP_DEV_ATTRIBUTE(gscr); + SETUP_DEV_ATTRIBUTE(trim); + BUG_ON(count > ATA_DEV_ATTRS); + i->dev_attrs[count] = NULL; + + return &i->t; +} + +/** + * ata_release_transport -- release ATA transport template instance + * @t: transport template instance + */ +void ata_release_transport(struct scsi_transport_template *t) +{ + struct ata_internal *i = to_ata_internal(t); + + transport_container_unregister(&i->t.host_attrs); + transport_container_unregister(&i->link_attr_cont); + transport_container_unregister(&i->dev_attr_cont); + + kfree(i); +} + +__init int libata_transport_init(void) +{ + int error; + + error = transport_class_register(&ata_link_class); + if (error) + goto out_unregister_transport; + error = transport_class_register(&ata_port_class); + if (error) + goto out_unregister_link; + error = transport_class_register(&ata_dev_class); + if (error) + goto out_unregister_port; + return 0; + + out_unregister_port: + transport_class_unregister(&ata_port_class); + out_unregister_link: + transport_class_unregister(&ata_link_class); + out_unregister_transport: + return error; + +} + +void __exit libata_transport_exit(void) +{ + transport_class_unregister(&ata_link_class); + transport_class_unregister(&ata_port_class); + transport_class_unregister(&ata_dev_class); +} diff --git a/drivers/ata/libata-transport.h b/drivers/ata/libata-transport.h new file mode 100644 index 000000000..2820cf864 --- /dev/null +++ b/drivers/ata/libata-transport.h @@ -0,0 +1,18 @@ +#ifndef _LIBATA_TRANSPORT_H +#define _LIBATA_TRANSPORT_H + + +extern struct scsi_transport_template *ata_scsi_transport_template; + +int ata_tlink_add(struct ata_link *link); +void ata_tlink_delete(struct ata_link *link); + +int ata_tport_add(struct device *parent, struct ata_port *ap); +void ata_tport_delete(struct ata_port *ap); + +struct scsi_transport_template *ata_attach_transport(void); +void ata_release_transport(struct scsi_transport_template *t); + +__init int libata_transport_init(void); +void __exit libata_transport_exit(void); +#endif diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c new file mode 100644 index 000000000..f3a65a314 --- /dev/null +++ b/drivers/ata/libata-zpodd.c @@ -0,0 +1,283 @@ +#include +#include +#include +#include +#include +#include + +#include "libata.h" + +static int zpodd_poweroff_delay = 30; /* 30 seconds for power off delay */ +module_param(zpodd_poweroff_delay, int, 0644); +MODULE_PARM_DESC(zpodd_poweroff_delay, "Poweroff delay for ZPODD in seconds"); + +enum odd_mech_type { + ODD_MECH_TYPE_SLOT, + ODD_MECH_TYPE_DRAWER, + ODD_MECH_TYPE_UNSUPPORTED, +}; + +struct zpodd { + enum odd_mech_type mech_type; /* init during probe, RO afterwards */ + struct ata_device *dev; + + /* The following fields are synchronized by PM core. */ + bool from_notify; /* resumed as a result of + * acpi wake notification */ + bool zp_ready; /* ZP ready state */ + unsigned long last_ready; /* last ZP ready timestamp */ + bool zp_sampled; /* ZP ready state sampled */ + bool powered_off; /* ODD is powered off + * during suspend */ +}; + +static int eject_tray(struct ata_device *dev) +{ + struct ata_taskfile tf; + const char cdb[] = { GPCMD_START_STOP_UNIT, + 0, 0, 0, + 0x02, /* LoEj */ + 0, 0, 0, 0, 0, 0, 0, + }; + + ata_tf_init(dev, &tf); + tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.command = ATA_CMD_PACKET; + tf.protocol = ATAPI_PROT_NODATA; + + return ata_exec_internal(dev, &tf, cdb, DMA_NONE, NULL, 0, 0); +} + +/* Per the spec, only slot type and drawer type ODD can be supported */ +static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev) +{ + char buf[16]; + unsigned int ret; + struct rm_feature_desc *desc = (void *)(buf + 8); + struct ata_taskfile tf; + char cdb[] = { GPCMD_GET_CONFIGURATION, + 2, /* only 1 feature descriptor requested */ + 0, 3, /* 3, removable medium feature */ + 0, 0, 0,/* reserved */ + 0, sizeof(buf), + 0, 0, 0, + }; + + ata_tf_init(dev, &tf); + tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.command = ATA_CMD_PACKET; + tf.protocol = ATAPI_PROT_PIO; + tf.lbam = sizeof(buf); + + ret = ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE, + buf, sizeof(buf), 0); + if (ret) + return ODD_MECH_TYPE_UNSUPPORTED; + + if (be16_to_cpu(desc->feature_code) != 3) + return ODD_MECH_TYPE_UNSUPPORTED; + + if (desc->mech_type == 0 && desc->load == 0 && desc->eject == 1) + return ODD_MECH_TYPE_SLOT; + else if (desc->mech_type == 1 && desc->load == 0 && desc->eject == 1) + return ODD_MECH_TYPE_DRAWER; + else + return ODD_MECH_TYPE_UNSUPPORTED; +} + +/* Test if ODD is zero power ready by sense code */ +static bool zpready(struct ata_device *dev) +{ + u8 sense_key, *sense_buf; + unsigned int ret, asc, ascq, add_len; + struct zpodd *zpodd = dev->zpodd; + + ret = atapi_eh_tur(dev, &sense_key); + + if (!ret || sense_key != NOT_READY) + return false; + + sense_buf = dev->link->ap->sector_buf; + ret = atapi_eh_request_sense(dev, sense_buf, sense_key); + if (ret) + return false; + + /* sense valid */ + if ((sense_buf[0] & 0x7f) != 0x70) + return false; + + add_len = sense_buf[7]; + /* has asc and ascq */ + if (add_len < 6) + return false; + + asc = sense_buf[12]; + ascq = sense_buf[13]; + + if (zpodd->mech_type == ODD_MECH_TYPE_SLOT) + /* no media inside */ + return asc == 0x3a; + else + /* no media inside and door closed */ + return asc == 0x3a && ascq == 0x01; +} + +/* + * Update the zpodd->zp_ready field. This field will only be set + * if the ODD has stayed in ZP ready state for zpodd_poweroff_delay + * time, and will be used to decide if power off is allowed. If it + * is set, it will be cleared during resume from powered off state. + */ +void zpodd_on_suspend(struct ata_device *dev) +{ + struct zpodd *zpodd = dev->zpodd; + unsigned long expires; + + if (!zpready(dev)) { + zpodd->zp_sampled = false; + zpodd->zp_ready = false; + return; + } + + if (!zpodd->zp_sampled) { + zpodd->zp_sampled = true; + zpodd->last_ready = jiffies; + return; + } + + expires = zpodd->last_ready + + msecs_to_jiffies(zpodd_poweroff_delay * 1000); + if (time_before(jiffies, expires)) + return; + + zpodd->zp_ready = true; +} + +bool zpodd_zpready(struct ata_device *dev) +{ + struct zpodd *zpodd = dev->zpodd; + return zpodd->zp_ready; +} + +/* + * Enable runtime wake capability through ACPI and set the powered_off flag, + * this flag will be used during resume to decide what operations are needed + * to take. + * + * Also, media poll needs to be silenced, so that it doesn't bring the ODD + * back to full power state every few seconds. + */ +void zpodd_enable_run_wake(struct ata_device *dev) +{ + struct zpodd *zpodd = dev->zpodd; + + sdev_disable_disk_events(dev->sdev); + + zpodd->powered_off = true; + device_set_run_wake(&dev->tdev, true); + acpi_pm_device_run_wake(&dev->tdev, true); +} + +/* Disable runtime wake capability if it is enabled */ +void zpodd_disable_run_wake(struct ata_device *dev) +{ + struct zpodd *zpodd = dev->zpodd; + + if (zpodd->powered_off) { + acpi_pm_device_run_wake(&dev->tdev, false); + device_set_run_wake(&dev->tdev, false); + } +} + +/* + * Post power on processing after the ODD has been recovered. If the + * ODD wasn't powered off during suspend, it doesn't do anything. + * + * For drawer type ODD, if it is powered on due to user pressed the + * eject button, the tray needs to be ejected. This can only be done + * after the ODD has been recovered, i.e. link is initialized and + * device is able to process NON_DATA PIO command, as eject needs to + * send command for the ODD to process. + * + * The from_notify flag set in wake notification handler function + * zpodd_wake_dev represents if power on is due to user's action. + * + * For both types of ODD, several fields need to be reset. + */ +void zpodd_post_poweron(struct ata_device *dev) +{ + struct zpodd *zpodd = dev->zpodd; + + if (!zpodd->powered_off) + return; + + zpodd->powered_off = false; + + if (zpodd->from_notify) { + zpodd->from_notify = false; + if (zpodd->mech_type == ODD_MECH_TYPE_DRAWER) + eject_tray(dev); + } + + zpodd->zp_sampled = false; + zpodd->zp_ready = false; + + sdev_enable_disk_events(dev->sdev); +} + +static void zpodd_wake_dev(acpi_handle handle, u32 event, void *context) +{ + struct ata_device *ata_dev = context; + struct zpodd *zpodd = ata_dev->zpodd; + struct device *dev = &ata_dev->sdev->sdev_gendev; + + if (event == ACPI_NOTIFY_DEVICE_WAKE && pm_runtime_suspended(dev)) { + zpodd->from_notify = true; + pm_runtime_resume(dev); + } +} + +static void ata_acpi_add_pm_notifier(struct ata_device *dev) +{ + acpi_handle handle = ata_dev_acpi_handle(dev); + acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, + zpodd_wake_dev, dev); +} + +static void ata_acpi_remove_pm_notifier(struct ata_device *dev) +{ + acpi_handle handle = ata_dev_acpi_handle(dev); + acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, zpodd_wake_dev); +} + +void zpodd_init(struct ata_device *dev) +{ + struct acpi_device *adev = ACPI_COMPANION(&dev->tdev); + enum odd_mech_type mech_type; + struct zpodd *zpodd; + + if (dev->zpodd || !adev || !acpi_device_can_poweroff(adev)) + return; + + mech_type = zpodd_get_mech_type(dev); + if (mech_type == ODD_MECH_TYPE_UNSUPPORTED) + return; + + zpodd = kzalloc(sizeof(struct zpodd), GFP_KERNEL); + if (!zpodd) + return; + + zpodd->mech_type = mech_type; + + ata_acpi_add_pm_notifier(dev); + zpodd->dev = dev; + dev->zpodd = zpodd; + dev_pm_qos_expose_flags(&dev->tdev, 0); +} + +void zpodd_exit(struct ata_device *dev) +{ + ata_acpi_remove_pm_notifier(dev); + kfree(dev->zpodd); + dev->zpodd = NULL; +} diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h new file mode 100644 index 000000000..35016d64b --- /dev/null +++ b/drivers/ata/libata.h @@ -0,0 +1,262 @@ +/* + * libata.h - helper library for ATA + * + * Copyright 2003-2004 Red Hat, Inc. All rights reserved. + * Copyright 2003-2004 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + */ + +#ifndef __LIBATA_H__ +#define __LIBATA_H__ + +#define DRV_NAME "libata" +#define DRV_VERSION "3.00" /* must be exactly four chars */ + +struct ata_scsi_args { + struct ata_device *dev; + u16 *id; + struct scsi_cmnd *cmd; + void (*done)(struct scsi_cmnd *); +}; + +/* libata-core.c */ +enum { + /* flags for ata_dev_read_id() */ + ATA_READID_POSTRESET = (1 << 0), /* reading ID after reset */ + + /* selector for ata_down_xfermask_limit() */ + ATA_DNXFER_PIO = 0, /* speed down PIO */ + ATA_DNXFER_DMA = 1, /* speed down DMA */ + ATA_DNXFER_40C = 2, /* apply 40c cable limit */ + ATA_DNXFER_FORCE_PIO = 3, /* force PIO */ + ATA_DNXFER_FORCE_PIO0 = 4, /* force PIO0 */ + + ATA_DNXFER_QUIET = (1 << 31), +}; + +extern atomic_t ata_print_id; +extern int atapi_passthru16; +extern int libata_fua; +extern int libata_noacpi; +extern int libata_allow_tpm; +extern struct device_type ata_port_type; +extern struct ata_link *ata_dev_phys_link(struct ata_device *dev); +extern void ata_force_cbl(struct ata_port *ap); +extern u64 ata_tf_to_lba(const struct ata_taskfile *tf); +extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf); +extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag); +extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, + u64 block, u32 n_block, unsigned int tf_flags, + unsigned int tag); +extern u64 ata_tf_read_block(const struct ata_taskfile *tf, + struct ata_device *dev); +extern unsigned ata_exec_internal(struct ata_device *dev, + struct ata_taskfile *tf, const u8 *cdb, + int dma_dir, void *buf, unsigned int buflen, + unsigned long timeout); +extern unsigned ata_exec_internal_sg(struct ata_device *dev, + struct ata_taskfile *tf, const u8 *cdb, + int dma_dir, struct scatterlist *sg, + unsigned int n_elem, unsigned long timeout); +extern int ata_wait_ready(struct ata_link *link, unsigned long deadline, + int (*check_ready)(struct ata_link *link)); +extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, + unsigned int flags, u16 *id); +extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags); +extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, + unsigned int readid_flags); +extern int ata_dev_configure(struct ata_device *dev); +extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit); +extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); +extern unsigned int ata_dev_set_feature(struct ata_device *dev, + u8 enable, u8 feature); +extern void ata_sg_clean(struct ata_queued_cmd *qc); +extern void ata_qc_free(struct ata_queued_cmd *qc); +extern void ata_qc_issue(struct ata_queued_cmd *qc); +extern void __ata_qc_complete(struct ata_queued_cmd *qc); +extern int atapi_check_dma(struct ata_queued_cmd *qc); +extern void swap_buf_le16(u16 *buf, unsigned int buf_words); +extern bool ata_phys_link_online(struct ata_link *link); +extern bool ata_phys_link_offline(struct ata_link *link); +extern void ata_dev_init(struct ata_device *dev); +extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp); +extern int sata_link_init_config(struct ata_link *link); +extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); +extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); +extern struct ata_port *ata_port_alloc(struct ata_host *host); +extern const char *sata_spd_string(unsigned int spd); +extern int ata_port_probe(struct ata_port *ap); +extern void __ata_port_probe(struct ata_port *ap); + +#define to_ata_port(d) container_of(d, struct ata_port, tdev) + +/* libata-acpi.c */ +#ifdef CONFIG_ATA_ACPI +extern unsigned int ata_acpi_gtf_filter; +extern void ata_acpi_dissociate(struct ata_host *host); +extern int ata_acpi_on_suspend(struct ata_port *ap); +extern void ata_acpi_on_resume(struct ata_port *ap); +extern int ata_acpi_on_devcfg(struct ata_device *dev); +extern void ata_acpi_on_disable(struct ata_device *dev); +extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state); +extern void ata_acpi_bind_port(struct ata_port *ap); +extern void ata_acpi_bind_dev(struct ata_device *dev); +extern acpi_handle ata_dev_acpi_handle(struct ata_device *dev); +#else +static inline void ata_acpi_dissociate(struct ata_host *host) { } +static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; } +static inline void ata_acpi_on_resume(struct ata_port *ap) { } +static inline int ata_acpi_on_devcfg(struct ata_device *dev) { return 0; } +static inline void ata_acpi_on_disable(struct ata_device *dev) { } +static inline void ata_acpi_set_state(struct ata_port *ap, + pm_message_t state) { } +static inline void ata_acpi_bind_port(struct ata_port *ap) {} +static inline void ata_acpi_bind_dev(struct ata_device *dev) {} +#endif + +/* libata-scsi.c */ +extern int ata_scsi_add_hosts(struct ata_host *host, + struct scsi_host_template *sht); +extern void ata_scsi_scan_host(struct ata_port *ap, int sync); +extern int ata_scsi_offline_dev(struct ata_device *dev); +extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq); +extern void ata_scsi_set_sense_information(struct scsi_cmnd *cmd, + const struct ata_taskfile *tf); +extern void ata_scsi_media_change_notify(struct ata_device *dev); +extern void ata_scsi_hotplug(struct work_struct *work); +extern void ata_schedule_scsi_eh(struct Scsi_Host *shost); +extern void ata_scsi_dev_rescan(struct work_struct *work); +extern int ata_bus_probe(struct ata_port *ap); +extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, + unsigned int id, u64 lun); +int ata_sas_allocate_tag(struct ata_port *ap); +void ata_sas_free_tag(unsigned int tag, struct ata_port *ap); + + +/* libata-eh.c */ +extern unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd); +extern void ata_internal_cmd_timed_out(struct ata_device *dev, u8 cmd); +extern void ata_eh_acquire(struct ata_port *ap); +extern void ata_eh_release(struct ata_port *ap); +extern enum blk_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); +extern void ata_scsi_error(struct Scsi_Host *host); +extern void ata_eh_fastdrain_timerfn(unsigned long arg); +extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc); +extern void ata_dev_disable(struct ata_device *dev); +extern void ata_eh_detach_dev(struct ata_device *dev); +extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev, + unsigned int action); +extern void ata_eh_done(struct ata_link *link, struct ata_device *dev, + unsigned int action); +extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log, + u8 page, void *buf, unsigned int sectors); +extern void ata_eh_autopsy(struct ata_port *ap); +const char *ata_get_cmd_descript(u8 command); +extern void ata_eh_report(struct ata_port *ap); +extern int ata_eh_reset(struct ata_link *link, int classify, + ata_prereset_fn_t prereset, ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, ata_postreset_fn_t postreset); +extern int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev); +extern int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset, + struct ata_link **r_failed_disk); +extern void ata_eh_finish(struct ata_port *ap); +extern int ata_ering_map(struct ata_ering *ering, + int (*map_fn)(struct ata_ering_entry *, void *), + void *arg); +extern unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key); +extern unsigned int atapi_eh_request_sense(struct ata_device *dev, + u8 *sense_buf, u8 dfl_sense_key); + +/* libata-pmp.c */ +#ifdef CONFIG_SATA_PMP +extern int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val); +extern int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val); +extern int sata_pmp_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints); +extern int sata_pmp_attach(struct ata_device *dev); +#else /* CONFIG_SATA_PMP */ +static inline int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val) +{ + return -EINVAL; +} + +static inline int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val) +{ + return -EINVAL; +} + +static inline int sata_pmp_set_lpm(struct ata_link *link, + enum ata_lpm_policy policy, unsigned hints) +{ + return -EINVAL; +} + +static inline int sata_pmp_attach(struct ata_device *dev) +{ + return -EINVAL; +} +#endif /* CONFIG_SATA_PMP */ + +/* libata-sff.c */ +#ifdef CONFIG_ATA_SFF +extern void ata_sff_flush_pio_task(struct ata_port *ap); +extern void ata_sff_port_init(struct ata_port *ap); +extern int ata_sff_init(void); +extern void ata_sff_exit(void); +#else /* CONFIG_ATA_SFF */ +static inline void ata_sff_flush_pio_task(struct ata_port *ap) +{ } +static inline void ata_sff_port_init(struct ata_port *ap) +{ } +static inline int ata_sff_init(void) +{ return 0; } +static inline void ata_sff_exit(void) +{ } +#endif /* CONFIG_ATA_SFF */ + +/* libata-zpodd.c */ +#ifdef CONFIG_SATA_ZPODD +void zpodd_init(struct ata_device *dev); +void zpodd_exit(struct ata_device *dev); +static inline bool zpodd_dev_enabled(struct ata_device *dev) +{ + return dev->zpodd != NULL; +} +void zpodd_on_suspend(struct ata_device *dev); +bool zpodd_zpready(struct ata_device *dev); +void zpodd_enable_run_wake(struct ata_device *dev); +void zpodd_disable_run_wake(struct ata_device *dev); +void zpodd_post_poweron(struct ata_device *dev); +#else /* CONFIG_SATA_ZPODD */ +static inline void zpodd_init(struct ata_device *dev) {} +static inline void zpodd_exit(struct ata_device *dev) {} +static inline bool zpodd_dev_enabled(struct ata_device *dev) { return false; } +static inline void zpodd_on_suspend(struct ata_device *dev) {} +static inline bool zpodd_zpready(struct ata_device *dev) { return false; } +static inline void zpodd_enable_run_wake(struct ata_device *dev) {} +static inline void zpodd_disable_run_wake(struct ata_device *dev) {} +static inline void zpodd_post_poweron(struct ata_device *dev) {} +#endif /* CONFIG_SATA_ZPODD */ + +#endif /* __LIBATA_H__ */ diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c new file mode 100644 index 000000000..b70fce2a3 --- /dev/null +++ b/drivers/ata/pata_acpi.c @@ -0,0 +1,280 @@ +/* + * ACPI PATA driver + * + * (c) 2007 Red Hat + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_acpi" +#define DRV_VERSION "0.2.3" + +struct pata_acpi { + struct ata_acpi_gtm gtm; + void *last; + unsigned long mask[2]; +}; + +/** + * pacpi_pre_reset - check for 40/80 pin + * @ap: Port + * @deadline: deadline jiffies for the operation + * + * Perform the PATA port setup we need. + */ + +static int pacpi_pre_reset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pata_acpi *acpi = ap->private_data; + if (ACPI_HANDLE(&ap->tdev) == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0) + return -ENODEV; + + return ata_sff_prereset(link, deadline); +} + +/** + * pacpi_cable_detect - cable type detection + * @ap: port to detect + * + * Perform device specific cable detection + */ + +static int pacpi_cable_detect(struct ata_port *ap) +{ + struct pata_acpi *acpi = ap->private_data; + + if ((acpi->mask[0] | acpi->mask[1]) & (0xF8 << ATA_SHIFT_UDMA)) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + +/** + * pacpi_discover_modes - filter non ACPI modes + * @adev: ATA device + * @mask: proposed modes + * + * Try the modes available and see which ones the ACPI method will + * set up sensibly. From this we get a mask of ACPI modes we can use + */ + +static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device *adev) +{ + struct pata_acpi *acpi = ap->private_data; + struct ata_acpi_gtm probe; + unsigned int xfer_mask; + + probe = acpi->gtm; + + ata_acpi_gtm(ap, &probe); + + xfer_mask = ata_acpi_gtm_xfermask(adev, &probe); + + if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA)) + ap->cbl = ATA_CBL_PATA80; + + return xfer_mask; +} + +/** + * pacpi_mode_filter - mode filter for ACPI + * @adev: device + * @mask: mask of valid modes + * + * Filter the valid mode list according to our own specific rules, in + * this case the list of discovered valid modes obtained by ACPI probing + */ + +static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask) +{ + struct pata_acpi *acpi = adev->link->ap->private_data; + return mask & acpi->mask[adev->devno]; +} + +/** + * pacpi_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + */ + +static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + int unit = adev->devno; + struct pata_acpi *acpi = ap->private_data; + const struct ata_timing *t; + + if (!(acpi->gtm.flags & 0x10)) + unit = 0; + + /* Now stuff the nS values into the structure */ + t = ata_timing_find_mode(adev->pio_mode); + acpi->gtm.drive[unit].pio = t->cycle; + ata_acpi_stm(ap, &acpi->gtm); + /* See what mode we actually got */ + ata_acpi_gtm(ap, &acpi->gtm); +} + +/** + * pacpi_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + */ + +static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + int unit = adev->devno; + struct pata_acpi *acpi = ap->private_data; + const struct ata_timing *t; + + if (!(acpi->gtm.flags & 0x10)) + unit = 0; + + /* Now stuff the nS values into the structure */ + t = ata_timing_find_mode(adev->dma_mode); + if (adev->dma_mode >= XFER_UDMA_0) { + acpi->gtm.drive[unit].dma = t->udma; + acpi->gtm.flags |= (1 << (2 * unit)); + } else { + acpi->gtm.drive[unit].dma = t->cycle; + acpi->gtm.flags &= ~(1 << (2 * unit)); + } + ata_acpi_stm(ap, &acpi->gtm); + /* See what mode we actually got */ + ata_acpi_gtm(ap, &acpi->gtm); +} + +/** + * pacpi_qc_issue - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * necessary. + */ + +static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct pata_acpi *acpi = ap->private_data; + + if (acpi->gtm.flags & 0x10) + return ata_bmdma_qc_issue(qc); + + if (adev != acpi->last) { + pacpi_set_piomode(ap, adev); + if (ata_dma_enabled(adev)) + pacpi_set_dmamode(ap, adev); + acpi->last = adev; + } + return ata_bmdma_qc_issue(qc); +} + +/** + * pacpi_port_start - port setup + * @ap: ATA port being set up + * + * Use the port_start hook to maintain private control structures + */ + +static int pacpi_port_start(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct pata_acpi *acpi; + + if (ACPI_HANDLE(&ap->tdev) == NULL) + return -ENODEV; + + acpi = ap->private_data = devm_kzalloc(&pdev->dev, sizeof(struct pata_acpi), GFP_KERNEL); + if (ap->private_data == NULL) + return -ENOMEM; + acpi->mask[0] = pacpi_discover_modes(ap, &ap->link.device[0]); + acpi->mask[1] = pacpi_discover_modes(ap, &ap->link.device[1]); + return ata_bmdma_port_start(ap); +} + +static struct scsi_host_template pacpi_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations pacpi_ops = { + .inherits = &ata_bmdma_port_ops, + .qc_issue = pacpi_qc_issue, + .cable_detect = pacpi_cable_detect, + .mode_filter = pacpi_mode_filter, + .set_piomode = pacpi_set_piomode, + .set_dmamode = pacpi_set_dmamode, + .prereset = pacpi_pre_reset, + .port_start = pacpi_port_start, +}; + + +/** + * pacpi_init_one - Register ACPI ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in pacpi_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + + .port_ops = &pacpi_ops, + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + if (pdev->vendor == PCI_VENDOR_ID_ATI) { + int rc = pcim_enable_device(pdev); + if (rc < 0) + return rc; + pcim_pin_device(pdev); + } + return ata_pci_bmdma_init_one(pdev, ppi, &pacpi_sht, NULL, 0); +} + +static const struct pci_device_id pacpi_pci_tbl[] = { + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1}, + { } /* terminate list */ +}; + +static struct pci_driver pacpi_pci_driver = { + .name = DRV_NAME, + .id_table = pacpi_pci_tbl, + .probe = pacpi_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(pacpi_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for ATA in ACPI mode"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, pacpi_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c new file mode 100644 index 000000000..d19cd88ed --- /dev/null +++ b/drivers/ata/pata_ali.c @@ -0,0 +1,651 @@ +/* + * pata_ali.c - ALI 15x3 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * + * based in part upon + * linux/drivers/ide/pci/alim15x3.c Version 0.17 2003/01/02 + * + * Copyright (C) 1998-2000 Michel Aubry, Maintainer + * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer + * Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer + * + * Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org) + * May be copied or modified under the terms of the GNU General Public License + * Copyright (C) 2002 Alan Cox + * ALi (now ULi M5228) support by Clear Zhang + * + * Documentation + * Chipset documentation available under NDA only + * + * TODO/CHECK + * Cannot have ATAPI on both master & slave for rev < c2 (???) but + * otherwise should do atapi DMA (For now for old we do PIO only for + * ATAPI) + * Review Sunblade workaround. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_ali" +#define DRV_VERSION "0.7.8" + +static int ali_atapi_dma = 0; +module_param_named(atapi_dma, ali_atapi_dma, int, 0644); +MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)"); + +static struct pci_dev *ali_isa_bridge; + +/* + * Cable special cases + */ + +static const struct dmi_system_id cable_dmi_table[] = { + { + .ident = "HP Pavilion N5430", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"), + }, + }, + { + .ident = "Toshiba Satellite S1800-814", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"), + }, + }, + { } +}; + +static int ali_cable_override(struct pci_dev *pdev) +{ + /* Fujitsu P2000 */ + if (pdev->subsystem_vendor == 0x10CF && pdev->subsystem_device == 0x10AF) + return 1; + /* Mitac 8317 (Winbook-A) and relatives */ + if (pdev->subsystem_vendor == 0x1071 && pdev->subsystem_device == 0x8317) + return 1; + /* Systems by DMI */ + if (dmi_check_system(cable_dmi_table)) + return 1; + return 0; +} + +/** + * ali_c2_cable_detect - cable detection + * @ap: ATA port + * + * Perform cable detection for C2 and later revisions + */ + +static int ali_c2_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ata66; + + /* Certain laptops use short but suitable cables and don't + implement the detect logic */ + + if (ali_cable_override(pdev)) + return ATA_CBL_PATA40_SHORT; + + /* Host view cable detect 0x4A bit 0 primary bit 1 secondary + Bit set for 40 pin */ + pci_read_config_byte(pdev, 0x4A, &ata66); + if (ata66 & (1 << ap->port_no)) + return ATA_CBL_PATA40; + else + return ATA_CBL_PATA80; +} + +/** + * ali_20_filter - filter for earlier ALI DMA + * @ap: ALi ATA port + * @adev: attached device + * + * Ensure that we do not do DMA on CD devices. We may be able to + * fix that later on. Also ensure we do not do UDMA on WDC drives + */ + +static unsigned long ali_20_filter(struct ata_device *adev, unsigned long mask) +{ + char model_num[ATA_ID_PROD_LEN + 1]; + /* No DMA on anything but a disk for now */ + if (adev->class != ATA_DEV_ATA) + mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num)); + if (strstr(model_num, "WDC")) + return mask &= ~ATA_MASK_UDMA; + return mask; +} + +/** + * ali_fifo_control - FIFO manager + * @ap: ALi channel to control + * @adev: device for FIFO control + * @on: 0 for off 1 for on + * + * Enable or disable the FIFO on a given device. Because of the way the + * ALi FIFO works it provides a boost on ATA disk but can be confused by + * ATAPI and we must therefore manage it. + */ + +static void ali_fifo_control(struct ata_port *ap, struct ata_device *adev, int on) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int pio_fifo = 0x54 + ap->port_no; + u8 fifo; + int shift = 4 * adev->devno; + + /* ATA - FIFO on set nibble to 0x05, ATAPI - FIFO off, set nibble to + 0x00. Not all the docs agree but the behaviour we now use is the + one stated in the BIOS Programming Guide */ + + pci_read_config_byte(pdev, pio_fifo, &fifo); + fifo &= ~(0x0F << shift); + fifo |= (on << shift); + pci_write_config_byte(pdev, pio_fifo, fifo); +} + +/** + * ali_program_modes - load mode registers + * @ap: ALi channel to load + * @adev: Device the timing is for + * @t: timing data + * @ultra: UDMA timing or zero for off + * + * Loads the timing registers for cmd/data and disable UDMA if + * ultra is zero. If ultra is set then load and enable the UDMA + * timing but do not touch the command/data timing. + */ + +static void ali_program_modes(struct ata_port *ap, struct ata_device *adev, struct ata_timing *t, u8 ultra) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int cas = 0x58 + 4 * ap->port_no; /* Command timing */ + int cbt = 0x59 + 4 * ap->port_no; /* Command timing */ + int drwt = 0x5A + 4 * ap->port_no + adev->devno; /* R/W timing */ + int udmat = 0x56 + ap->port_no; /* UDMA timing */ + int shift = 4 * adev->devno; + u8 udma; + + if (t != NULL) { + t->setup = clamp_val(t->setup, 1, 8) & 7; + t->act8b = clamp_val(t->act8b, 1, 8) & 7; + t->rec8b = clamp_val(t->rec8b, 1, 16) & 15; + t->active = clamp_val(t->active, 1, 8) & 7; + t->recover = clamp_val(t->recover, 1, 16) & 15; + + pci_write_config_byte(pdev, cas, t->setup); + pci_write_config_byte(pdev, cbt, (t->act8b << 4) | t->rec8b); + pci_write_config_byte(pdev, drwt, (t->active << 4) | t->recover); + } + + /* Set up the UDMA enable */ + pci_read_config_byte(pdev, udmat, &udma); + udma &= ~(0x0F << shift); + udma |= ultra << shift; + pci_write_config_byte(pdev, udmat, udma); +} + +/** + * ali_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the ALi registers for PIO mode. + */ + +static void ali_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_device *pair = ata_dev_pair(adev); + struct ata_timing t; + unsigned long T = 1000000000 / 33333; /* PCI clock based */ + + ata_timing_compute(adev, adev->pio_mode, &t, T, 1); + if (pair) { + struct ata_timing p; + ata_timing_compute(pair, pair->pio_mode, &p, T, 1); + ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT); + if (pair->dma_mode) { + ata_timing_compute(pair, pair->dma_mode, &p, T, 1); + ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT); + } + } + + /* PIO FIFO is only permitted on ATA disk */ + if (adev->class != ATA_DEV_ATA) + ali_fifo_control(ap, adev, 0x00); + ali_program_modes(ap, adev, &t, 0); + if (adev->class == ATA_DEV_ATA) + ali_fifo_control(ap, adev, 0x05); + +} + +/** + * ali_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the ALi registers for DMA mode. + */ + +static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static u8 udma_timing[7] = { 0xC, 0xB, 0xA, 0x9, 0x8, 0xF, 0xD }; + struct ata_device *pair = ata_dev_pair(adev); + struct ata_timing t; + unsigned long T = 1000000000 / 33333; /* PCI clock based */ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + + if (adev->class == ATA_DEV_ATA) + ali_fifo_control(ap, adev, 0x08); + + if (adev->dma_mode >= XFER_UDMA_0) { + ali_program_modes(ap, adev, NULL, udma_timing[adev->dma_mode - XFER_UDMA_0]); + if (adev->dma_mode >= XFER_UDMA_3) { + u8 reg4b; + pci_read_config_byte(pdev, 0x4B, ®4b); + reg4b |= 1; + pci_write_config_byte(pdev, 0x4B, reg4b); + } + } else { + ata_timing_compute(adev, adev->dma_mode, &t, T, 1); + if (pair) { + struct ata_timing p; + ata_timing_compute(pair, pair->pio_mode, &p, T, 1); + ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT); + if (pair->dma_mode) { + ata_timing_compute(pair, pair->dma_mode, &p, T, 1); + ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT); + } + } + ali_program_modes(ap, adev, &t, 0); + } +} + +/** + * ali_warn_atapi_dma - Warn about ATAPI DMA disablement + * @adev: Device + * + * Whine about ATAPI DMA disablement if @adev is an ATAPI device. + * Can be used as ->dev_config. + */ + +static void ali_warn_atapi_dma(struct ata_device *adev) +{ + struct ata_eh_context *ehc = &adev->link->eh_context; + int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; + + if (print_info && adev->class == ATA_DEV_ATAPI && !ali_atapi_dma) { + ata_dev_warn(adev, + "WARNING: ATAPI DMA disabled for reliability issues. It can be enabled\n"); + ata_dev_warn(adev, + "WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n"); + } +} + +/** + * ali_lock_sectors - Keep older devices to 255 sector mode + * @adev: Device + * + * Called during the bus probe for each device that is found. We use + * this call to lock the sector count of the device to 255 or less on + * older ALi controllers. If we didn't do this then large I/O's would + * require LBA48 commands which the older ALi requires are issued by + * slower PIO methods + */ + +static void ali_lock_sectors(struct ata_device *adev) +{ + adev->max_sectors = 255; + ali_warn_atapi_dma(adev); +} + +/** + * ali_check_atapi_dma - DMA check for most ALi controllers + * @adev: Device + * + * Called to decide whether commands should be sent by DMA or PIO + */ + +static int ali_check_atapi_dma(struct ata_queued_cmd *qc) +{ + if (!ali_atapi_dma) { + /* FIXME: pata_ali can't do ATAPI DMA reliably but the + * IDE alim15x3 driver can. I tried lots of things + * but couldn't find what the actual difference was. + * If you got an idea, please write it to + * linux-ide@vger.kernel.org and cc htejun@gmail.com. + * + * Disable ATAPI DMA for now. + */ + return -EOPNOTSUPP; + } + + /* If its not a media command, its not worth it */ + if (atapi_cmd_type(qc->cdb[0]) == ATAPI_MISC) + return -EOPNOTSUPP; + return 0; +} + +static void ali_c2_c3_postreset(struct ata_link *link, unsigned int *classes) +{ + u8 r; + int port_bit = 4 << link->ap->port_no; + + /* If our bridge is an ALI 1533 then do the extra work */ + if (ali_isa_bridge) { + /* Tristate and re-enable the bus signals */ + pci_read_config_byte(ali_isa_bridge, 0x58, &r); + r &= ~port_bit; + pci_write_config_byte(ali_isa_bridge, 0x58, r); + r |= port_bit; + pci_write_config_byte(ali_isa_bridge, 0x58, r); + } + ata_sff_postreset(link, classes); +} + +static struct scsi_host_template ali_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +/* + * Port operations for PIO only ALi + */ + +static struct ata_port_operations ali_early_port_ops = { + .inherits = &ata_sff_port_ops, + .cable_detect = ata_cable_40wire, + .set_piomode = ali_set_piomode, + .sff_data_xfer = ata_sff_data_xfer32, +}; + +static const struct ata_port_operations ali_dma_base_ops = { + .inherits = &ata_bmdma32_port_ops, + .set_piomode = ali_set_piomode, + .set_dmamode = ali_set_dmamode, +}; + +/* + * Port operations for DMA capable ALi without cable + * detect + */ +static struct ata_port_operations ali_20_port_ops = { + .inherits = &ali_dma_base_ops, + .cable_detect = ata_cable_40wire, + .mode_filter = ali_20_filter, + .check_atapi_dma = ali_check_atapi_dma, + .dev_config = ali_lock_sectors, +}; + +/* + * Port operations for DMA capable ALi with cable detect + */ +static struct ata_port_operations ali_c2_port_ops = { + .inherits = &ali_dma_base_ops, + .check_atapi_dma = ali_check_atapi_dma, + .cable_detect = ali_c2_cable_detect, + .dev_config = ali_lock_sectors, + .postreset = ali_c2_c3_postreset, +}; + +/* + * Port operations for DMA capable ALi with cable detect + */ +static struct ata_port_operations ali_c4_port_ops = { + .inherits = &ali_dma_base_ops, + .check_atapi_dma = ali_check_atapi_dma, + .cable_detect = ali_c2_cable_detect, + .dev_config = ali_lock_sectors, +}; + +/* + * Port operations for DMA capable ALi with cable detect and LBA48 + */ +static struct ata_port_operations ali_c5_port_ops = { + .inherits = &ali_dma_base_ops, + .check_atapi_dma = ali_check_atapi_dma, + .dev_config = ali_warn_atapi_dma, + .cable_detect = ali_c2_cable_detect, +}; + + +/** + * ali_init_chipset - chip setup function + * @pdev: PCI device of ATA controller + * + * Perform the setup on the device that must be done both at boot + * and at resume time. + */ + +static void ali_init_chipset(struct pci_dev *pdev) +{ + u8 tmp; + struct pci_dev *north; + + /* + * The chipset revision selects the driver operations and + * mode data. + */ + + if (pdev->revision <= 0x20) { + pci_read_config_byte(pdev, 0x53, &tmp); + tmp |= 0x03; + pci_write_config_byte(pdev, 0x53, tmp); + } else { + pci_read_config_byte(pdev, 0x4a, &tmp); + pci_write_config_byte(pdev, 0x4a, tmp | 0x20); + pci_read_config_byte(pdev, 0x4B, &tmp); + if (pdev->revision < 0xC2) + /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */ + /* Clear CD-ROM DMA write bit */ + tmp &= 0x7F; + /* Cable and UDMA */ + if (pdev->revision >= 0xc2) + tmp |= 0x01; + pci_write_config_byte(pdev, 0x4B, tmp | 0x08); + /* + * CD_ROM DMA on (0x53 bit 0). Enable this even if we want + * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control + * via 0x54/55. + */ + pci_read_config_byte(pdev, 0x53, &tmp); + if (pdev->revision >= 0xc7) + tmp |= 0x03; + else + tmp |= 0x01; /* CD_ROM enable for DMA */ + pci_write_config_byte(pdev, 0x53, tmp); + } + north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0)); + if (north && north->vendor == PCI_VENDOR_ID_AL && ali_isa_bridge) { + /* Configure the ALi bridge logic. For non ALi rely on BIOS. + Set the south bridge enable bit */ + pci_read_config_byte(ali_isa_bridge, 0x79, &tmp); + if (pdev->revision == 0xC2) + pci_write_config_byte(ali_isa_bridge, 0x79, tmp | 0x04); + else if (pdev->revision > 0xC2 && pdev->revision < 0xC5) + pci_write_config_byte(ali_isa_bridge, 0x79, tmp | 0x02); + } + pci_dev_put(north); + ata_pci_bmdma_clear_simplex(pdev); +} +/** + * ali_init_one - discovery callback + * @pdev: PCI device ID + * @id: PCI table info + * + * An ALi IDE interface has been discovered. Figure out what revision + * and perform configuration work before handing it to the ATA layer + */ + +static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info info_early = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .port_ops = &ali_early_port_ops + }; + /* Revision 0x20 added DMA */ + static const struct ata_port_info info_20 = { + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .port_ops = &ali_20_port_ops + }; + /* Revision 0x20 with support logic added UDMA */ + static const struct ata_port_info info_20_udma = { + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, + .port_ops = &ali_20_port_ops + }; + /* Revision 0xC2 adds UDMA66 */ + static const struct ata_port_info info_c2 = { + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, + .port_ops = &ali_c2_port_ops + }; + /* Revision 0xC3 is UDMA66 for now */ + static const struct ata_port_info info_c3 = { + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, + .port_ops = &ali_c2_port_ops + }; + /* Revision 0xC4 is UDMA100 */ + static const struct ata_port_info info_c4 = { + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &ali_c4_port_ops + }; + /* Revision 0xC5 is UDMA133 with LBA48 DMA */ + static const struct ata_port_info info_c5 = { + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_IGN_SIMPLEX, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &ali_c5_port_ops + }; + + const struct ata_port_info *ppi[] = { NULL, NULL }; + u8 tmp; + int rc; + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* + * The chipset revision selects the driver operations and + * mode data. + */ + + if (pdev->revision < 0x20) { + ppi[0] = &info_early; + } else if (pdev->revision < 0xC2) { + ppi[0] = &info_20; + } else if (pdev->revision == 0xC2) { + ppi[0] = &info_c2; + } else if (pdev->revision == 0xC3) { + ppi[0] = &info_c3; + } else if (pdev->revision == 0xC4) { + ppi[0] = &info_c4; + } else + ppi[0] = &info_c5; + + ali_init_chipset(pdev); + + if (ali_isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) { + /* Are we paired with a UDMA capable chip */ + pci_read_config_byte(ali_isa_bridge, 0x5E, &tmp); + if ((tmp & 0x1E) == 0x12) + ppi[0] = &info_20_udma; + } + + if (!ppi[0]->mwdma_mask && !ppi[0]->udma_mask) + return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL, 0); + else + return ata_pci_bmdma_init_one(pdev, ppi, &ali_sht, NULL, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int ali_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + ali_init_chipset(pdev); + ata_host_resume(host); + return 0; +} +#endif + +static const struct pci_device_id ali[] = { + { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), }, + { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), }, + + { }, +}; + +static struct pci_driver ali_pci_driver = { + .name = DRV_NAME, + .id_table = ali, + .probe = ali_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ali_reinit_one, +#endif +}; + +static int __init ali_init(void) +{ + int ret; + ali_isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); + + ret = pci_register_driver(&ali_pci_driver); + if (ret < 0) + pci_dev_put(ali_isa_bridge); + return ret; +} + + +static void __exit ali_exit(void) +{ + pci_unregister_driver(&ali_pci_driver); + pci_dev_put(ali_isa_bridge); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for ALi PATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ali); +MODULE_VERSION(DRV_VERSION); + +module_init(ali_init); +module_exit(ali_exit); diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c new file mode 100644 index 000000000..8d4d959a8 --- /dev/null +++ b/drivers/ata/pata_amd.c @@ -0,0 +1,640 @@ +/* + * pata_amd.c - AMD PATA for new ATA layer + * (C) 2005-2006 Red Hat Inc + * + * Based on pata-sil680. Errata information is taken from data sheets + * and the amd74xx.c driver by Vojtech Pavlik. Nvidia SATA devices are + * claimed by sata-nv.c. + * + * TODO: + * Variable system clock when/if it makes sense + * Power management on ports + * + * + * Documentation publicly available. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_amd" +#define DRV_VERSION "0.4.1" + +/** + * timing_setup - shared timing computation and load + * @ap: ATA port being set up + * @adev: drive being configured + * @offset: port offset + * @speed: target speed + * @clock: clock multiplier (number of times 33MHz for this part) + * + * Perform the actual timing set up for Nvidia or AMD PATA devices. + * The actual devices vary so they all call into this helper function + * providing the clock multipler and offset (because AMD and Nvidia put + * the ports at different locations). + */ + +static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offset, int speed, int clock) +{ + static const unsigned char amd_cyc2udma[] = { + 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_device *peer = ata_dev_pair(adev); + int dn = ap->port_no * 2 + adev->devno; + struct ata_timing at, apeer; + int T, UT; + const int amd_clock = 33333; /* KHz. */ + u8 t; + + T = 1000000000 / amd_clock; + UT = T; + if (clock >= 2) + UT = T / 2; + + if (ata_timing_compute(adev, speed, &at, T, UT) < 0) { + dev_err(&pdev->dev, "unknown mode %d\n", speed); + return; + } + + if (peer) { + /* This may be over conservative */ + if (peer->dma_mode) { + ata_timing_compute(peer, peer->dma_mode, &apeer, T, UT); + ata_timing_merge(&apeer, &at, &at, ATA_TIMING_8BIT); + } + ata_timing_compute(peer, peer->pio_mode, &apeer, T, UT); + ata_timing_merge(&apeer, &at, &at, ATA_TIMING_8BIT); + } + + if (speed == XFER_UDMA_5 && amd_clock <= 33333) at.udma = 1; + if (speed == XFER_UDMA_6 && amd_clock <= 33333) at.udma = 15; + + /* + * Now do the setup work + */ + + /* Configure the address set up timing */ + pci_read_config_byte(pdev, offset + 0x0C, &t); + t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(at.setup, 1, 4) - 1) << ((3 - dn) << 1)); + pci_write_config_byte(pdev, offset + 0x0C , t); + + /* Configure the 8bit I/O timing */ + pci_write_config_byte(pdev, offset + 0x0E + (1 - (dn >> 1)), + ((clamp_val(at.act8b, 1, 16) - 1) << 4) | (clamp_val(at.rec8b, 1, 16) - 1)); + + /* Drive timing */ + pci_write_config_byte(pdev, offset + 0x08 + (3 - dn), + ((clamp_val(at.active, 1, 16) - 1) << 4) | (clamp_val(at.recover, 1, 16) - 1)); + + switch (clock) { + case 1: + t = at.udma ? (0xc0 | (clamp_val(at.udma, 2, 5) - 2)) : 0x03; + break; + + case 2: + t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 2, 10)]) : 0x03; + break; + + case 3: + t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 10)]) : 0x03; + break; + + case 4: + t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 15)]) : 0x03; + break; + + default: + return; + } + + /* UDMA timing */ + if (at.udma) + pci_write_config_byte(pdev, offset + 0x10 + (3 - dn), t); +} + +/** + * amd_pre_reset - perform reset handling + * @link: ATA link + * @deadline: deadline jiffies for the operation + * + * Reset sequence checking enable bits to see which ports are + * active. + */ + +static int amd_pre_reset(struct ata_link *link, unsigned long deadline) +{ + static const struct pci_bits amd_enable_bits[] = { + { 0x40, 1, 0x02, 0x02 }, + { 0x40, 1, 0x01, 0x01 } + }; + + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + +/** + * amd_cable_detect - report cable type + * @ap: port + * + * AMD controller/BIOS setups record the cable type in word 0x42 + */ + +static int amd_cable_detect(struct ata_port *ap) +{ + static const u32 bitmask[2] = {0x03, 0x0C}; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ata66; + + pci_read_config_byte(pdev, 0x42, &ata66); + if (ata66 & bitmask[ap->port_no]) + return ATA_CBL_PATA80; + return ATA_CBL_PATA40; +} + +/** + * amd_fifo_setup - set the PIO FIFO for ATA/ATAPI + * @ap: ATA interface + * @adev: ATA device + * + * Set the PCI fifo for this device according to the devices present + * on the bus at this point in time. We need to turn the post write buffer + * off for ATAPI devices as we may need to issue a word sized write to the + * device as the final I/O + */ + +static void amd_fifo_setup(struct ata_port *ap) +{ + struct ata_device *adev; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const u8 fifobit[2] = { 0xC0, 0x30}; + u8 fifo = fifobit[ap->port_no]; + u8 r; + + + ata_for_each_dev(adev, &ap->link, ENABLED) { + if (adev->class == ATA_DEV_ATAPI) + fifo = 0; + } + if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) /* FIFO is broken */ + fifo = 0; + + /* On the later chips the read prefetch bits become no-op bits */ + pci_read_config_byte(pdev, 0x41, &r); + r &= ~fifobit[ap->port_no]; + r |= fifo; + pci_write_config_byte(pdev, 0x41, r); +} + +/** + * amd33_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the AMD registers for PIO mode. + */ + +static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + amd_fifo_setup(ap); + timing_setup(ap, adev, 0x40, adev->pio_mode, 1); +} + +static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + amd_fifo_setup(ap); + timing_setup(ap, adev, 0x40, adev->pio_mode, 2); +} + +static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + amd_fifo_setup(ap); + timing_setup(ap, adev, 0x40, adev->pio_mode, 3); +} + +static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + amd_fifo_setup(ap); + timing_setup(ap, adev, 0x40, adev->pio_mode, 4); +} + +/** + * amd33_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the MWDMA/UDMA modes for the AMD and Nvidia + * chipset. + */ + +static void amd33_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->dma_mode, 1); +} + +static void amd66_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->dma_mode, 2); +} + +static void amd100_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->dma_mode, 3); +} + +static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->dma_mode, 4); +} + +/* Both host-side and drive-side detection results are worthless on NV + * PATAs. Ignore them and just follow what BIOS configured. Both the + * current configuration in PCI config reg and ACPI GTM result are + * cached during driver attach and are consulted to select transfer + * mode. + */ +static unsigned long nv_mode_filter(struct ata_device *dev, + unsigned long xfer_mask) +{ + static const unsigned int udma_mask_map[] = + { ATA_UDMA2, ATA_UDMA1, ATA_UDMA0, 0, + ATA_UDMA3, ATA_UDMA4, ATA_UDMA5, ATA_UDMA6 }; + struct ata_port *ap = dev->link->ap; + char acpi_str[32] = ""; + u32 saved_udma, udma; + const struct ata_acpi_gtm *gtm; + unsigned long bios_limit = 0, acpi_limit = 0, limit; + + /* find out what BIOS configured */ + udma = saved_udma = (unsigned long)ap->host->private_data; + + if (ap->port_no == 0) + udma >>= 16; + if (dev->devno == 0) + udma >>= 8; + + if ((udma & 0xc0) == 0xc0) + bios_limit = ata_pack_xfermask(0, 0, udma_mask_map[udma & 0x7]); + + /* consult ACPI GTM too */ + gtm = ata_acpi_init_gtm(ap); + if (gtm) { + acpi_limit = ata_acpi_gtm_xfermask(dev, gtm); + + snprintf(acpi_str, sizeof(acpi_str), " (%u:%u:0x%x)", + gtm->drive[0].dma, gtm->drive[1].dma, gtm->flags); + } + + /* be optimistic, EH can take care of things if something goes wrong */ + limit = bios_limit | acpi_limit; + + /* If PIO or DMA isn't configured at all, don't limit. Let EH + * handle it. + */ + if (!(limit & ATA_MASK_PIO)) + limit |= ATA_MASK_PIO; + if (!(limit & (ATA_MASK_MWDMA | ATA_MASK_UDMA))) + limit |= ATA_MASK_MWDMA | ATA_MASK_UDMA; + /* PIO4, MWDMA2, UDMA2 should always be supported regardless of + cable detection result */ + limit |= ata_pack_xfermask(ATA_PIO4, ATA_MWDMA2, ATA_UDMA2); + + ata_port_dbg(ap, "nv_mode_filter: 0x%lx&0x%lx->0x%lx, " + "BIOS=0x%lx (0x%x) ACPI=0x%lx%s\n", + xfer_mask, limit, xfer_mask & limit, bios_limit, + saved_udma, acpi_limit, acpi_str); + + return xfer_mask & limit; +} + +/** + * nv_probe_init - cable detection + * @lin: ATA link + * + * Perform cable detection. The BIOS stores this in PCI config + * space for us. + */ + +static int nv_pre_reset(struct ata_link *link, unsigned long deadline) +{ + static const struct pci_bits nv_enable_bits[] = { + { 0x50, 1, 0x02, 0x02 }, + { 0x50, 1, 0x01, 0x01 } + }; + + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no])) + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + +/** + * nv100_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the AMD registers for PIO mode. + */ + +static void nv100_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x50, adev->pio_mode, 3); +} + +static void nv133_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x50, adev->pio_mode, 4); +} + +/** + * nv100_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the MWDMA/UDMA modes for the AMD and Nvidia + * chipset. + */ + +static void nv100_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x50, adev->dma_mode, 3); +} + +static void nv133_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x50, adev->dma_mode, 4); +} + +static void nv_host_stop(struct ata_host *host) +{ + u32 udma = (unsigned long)host->private_data; + + /* restore PCI config register 0x60 */ + pci_write_config_dword(to_pci_dev(host->dev), 0x60, udma); +} + +static struct scsi_host_template amd_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static const struct ata_port_operations amd_base_port_ops = { + .inherits = &ata_bmdma32_port_ops, + .prereset = amd_pre_reset, +}; + +static struct ata_port_operations amd33_port_ops = { + .inherits = &amd_base_port_ops, + .cable_detect = ata_cable_40wire, + .set_piomode = amd33_set_piomode, + .set_dmamode = amd33_set_dmamode, +}; + +static struct ata_port_operations amd66_port_ops = { + .inherits = &amd_base_port_ops, + .cable_detect = ata_cable_unknown, + .set_piomode = amd66_set_piomode, + .set_dmamode = amd66_set_dmamode, +}; + +static struct ata_port_operations amd100_port_ops = { + .inherits = &amd_base_port_ops, + .cable_detect = ata_cable_unknown, + .set_piomode = amd100_set_piomode, + .set_dmamode = amd100_set_dmamode, +}; + +static struct ata_port_operations amd133_port_ops = { + .inherits = &amd_base_port_ops, + .cable_detect = amd_cable_detect, + .set_piomode = amd133_set_piomode, + .set_dmamode = amd133_set_dmamode, +}; + +static const struct ata_port_operations nv_base_port_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = ata_cable_ignore, + .mode_filter = nv_mode_filter, + .prereset = nv_pre_reset, + .host_stop = nv_host_stop, +}; + +static struct ata_port_operations nv100_port_ops = { + .inherits = &nv_base_port_ops, + .set_piomode = nv100_set_piomode, + .set_dmamode = nv100_set_dmamode, +}; + +static struct ata_port_operations nv133_port_ops = { + .inherits = &nv_base_port_ops, + .set_piomode = nv133_set_piomode, + .set_dmamode = nv133_set_dmamode, +}; + +static void amd_clear_fifo(struct pci_dev *pdev) +{ + u8 fifo; + /* Disable the FIFO, the FIFO logic will re-enable it as + appropriate */ + pci_read_config_byte(pdev, 0x41, &fifo); + fifo &= 0x0F; + pci_write_config_byte(pdev, 0x41, fifo); +} + +static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info info[10] = { + { /* 0: AMD 7401 - no swdma */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, + .port_ops = &amd33_port_ops + }, + { /* 1: Early AMD7409 - no swdma */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, + .port_ops = &amd66_port_ops + }, + { /* 2: AMD 7409 */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, + .port_ops = &amd66_port_ops + }, + { /* 3: AMD 7411 */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &amd100_port_ops + }, + { /* 4: AMD 7441 */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &amd100_port_ops + }, + { /* 5: AMD 8111 - no swdma */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &amd133_port_ops + }, + { /* 6: AMD 8111 UDMA 100 (Serenade) - no swdma */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &amd133_port_ops + }, + { /* 7: Nvidia Nforce */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &nv100_port_ops + }, + { /* 8: Nvidia Nforce2 and later - no swdma */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &nv133_port_ops + }, + { /* 9: AMD CS5536 (Geode companion) */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &amd100_port_ops + } + }; + const struct ata_port_info *ppi[] = { NULL, NULL }; + int type = id->driver_data; + void *hpriv = NULL; + u8 fifo; + int rc; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + pci_read_config_byte(pdev, 0x41, &fifo); + + /* Check for AMD7409 without swdma errata and if found adjust type */ + if (type == 1 && pdev->revision > 0x7) + type = 2; + + /* Serenade ? */ + if (type == 5 && pdev->subsystem_vendor == PCI_VENDOR_ID_AMD && + pdev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE) + type = 6; /* UDMA 100 only */ + + /* + * Okay, type is determined now. Apply type-specific workarounds. + */ + ppi[0] = &info[type]; + + if (type < 3) + ata_pci_bmdma_clear_simplex(pdev); + if (pdev->vendor == PCI_VENDOR_ID_AMD) + amd_clear_fifo(pdev); + /* Cable detection on Nvidia chips doesn't work too well, + * cache BIOS programmed UDMA mode. + */ + if (type == 7 || type == 8) { + u32 udma; + + pci_read_config_dword(pdev, 0x60, &udma); + hpriv = (void *)(unsigned long)udma; + } + + /* And fire it up */ + return ata_pci_bmdma_init_one(pdev, ppi, &amd_sht, hpriv, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int amd_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + if (pdev->vendor == PCI_VENDOR_ID_AMD) { + amd_clear_fifo(pdev); + if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 || + pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401) + ata_pci_bmdma_clear_simplex(pdev); + } + ata_host_resume(host); + return 0; +} +#endif + +static const struct pci_device_id amd[] = { + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7409), 1 }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7411), 3 }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_OPUS_7441), 4 }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_8111_IDE), 5 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE), 7 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE), 8 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE), 8 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE), 8 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE), 8 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE), 8 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE), 8 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 8 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 8 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 8 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 8 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 8 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE), 8 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE), 8 }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 9 }, + + { }, +}; + +static struct pci_driver amd_pci_driver = { + .name = DRV_NAME, + .id_table = amd, + .probe = amd_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = amd_reinit_one, +#endif +}; + +module_pci_driver(amd_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for AMD and Nvidia PATA IDE"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, amd); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c new file mode 100644 index 000000000..a9b0c820f --- /dev/null +++ b/drivers/ata/pata_arasan_cf.c @@ -0,0 +1,974 @@ +/* + * drivers/ata/pata_arasan_cf.c + * + * Arasan Compact Flash host controller source file + * + * Copyright (C) 2011 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * The Arasan CompactFlash Device Controller IP core has three basic modes of + * operation: PC card ATA using I/O mode, PC card ATA using memory mode, PC card + * ATA using true IDE modes. This driver supports only True IDE mode currently. + * + * Arasan CF Controller shares global irq register with Arasan XD Controller. + * + * Tested on arch/arm/mach-spear13xx + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "arasan_cf" +#define TIMEOUT msecs_to_jiffies(3000) + +/* Registers */ +/* CompactFlash Interface Status */ +#define CFI_STS 0x000 + #define STS_CHG (1) + #define BIN_AUDIO_OUT (1 << 1) + #define CARD_DETECT1 (1 << 2) + #define CARD_DETECT2 (1 << 3) + #define INP_ACK (1 << 4) + #define CARD_READY (1 << 5) + #define IO_READY (1 << 6) + #define B16_IO_PORT_SEL (1 << 7) +/* IRQ */ +#define IRQ_STS 0x004 +/* Interrupt Enable */ +#define IRQ_EN 0x008 + #define CARD_DETECT_IRQ (1) + #define STATUS_CHNG_IRQ (1 << 1) + #define MEM_MODE_IRQ (1 << 2) + #define IO_MODE_IRQ (1 << 3) + #define TRUE_IDE_MODE_IRQ (1 << 8) + #define PIO_XFER_ERR_IRQ (1 << 9) + #define BUF_AVAIL_IRQ (1 << 10) + #define XFER_DONE_IRQ (1 << 11) + #define IGNORED_IRQS (STATUS_CHNG_IRQ | MEM_MODE_IRQ | IO_MODE_IRQ |\ + TRUE_IDE_MODE_IRQ) + #define TRUE_IDE_IRQS (CARD_DETECT_IRQ | PIO_XFER_ERR_IRQ |\ + BUF_AVAIL_IRQ | XFER_DONE_IRQ) +/* Operation Mode */ +#define OP_MODE 0x00C + #define CARD_MODE_MASK (0x3) + #define MEM_MODE (0x0) + #define IO_MODE (0x1) + #define TRUE_IDE_MODE (0x2) + + #define CARD_TYPE_MASK (1 << 2) + #define CF_CARD (0) + #define CF_PLUS_CARD (1 << 2) + + #define CARD_RESET (1 << 3) + #define CFHOST_ENB (1 << 4) + #define OUTPUTS_TRISTATE (1 << 5) + #define ULTRA_DMA_ENB (1 << 8) + #define MULTI_WORD_DMA_ENB (1 << 9) + #define DRQ_BLOCK_SIZE_MASK (0x3 << 11) + #define DRQ_BLOCK_SIZE_512 (0) + #define DRQ_BLOCK_SIZE_1024 (1 << 11) + #define DRQ_BLOCK_SIZE_2048 (2 << 11) + #define DRQ_BLOCK_SIZE_4096 (3 << 11) +/* CF Interface Clock Configuration */ +#define CLK_CFG 0x010 + #define CF_IF_CLK_MASK (0XF) +/* CF Timing Mode Configuration */ +#define TM_CFG 0x014 + #define MEM_MODE_TIMING_MASK (0x3) + #define MEM_MODE_TIMING_250NS (0x0) + #define MEM_MODE_TIMING_120NS (0x1) + #define MEM_MODE_TIMING_100NS (0x2) + #define MEM_MODE_TIMING_80NS (0x3) + + #define IO_MODE_TIMING_MASK (0x3 << 2) + #define IO_MODE_TIMING_250NS (0x0 << 2) + #define IO_MODE_TIMING_120NS (0x1 << 2) + #define IO_MODE_TIMING_100NS (0x2 << 2) + #define IO_MODE_TIMING_80NS (0x3 << 2) + + #define TRUEIDE_PIO_TIMING_MASK (0x7 << 4) + #define TRUEIDE_PIO_TIMING_SHIFT 4 + + #define TRUEIDE_MWORD_DMA_TIMING_MASK (0x7 << 7) + #define TRUEIDE_MWORD_DMA_TIMING_SHIFT 7 + + #define ULTRA_DMA_TIMING_MASK (0x7 << 10) + #define ULTRA_DMA_TIMING_SHIFT 10 +/* CF Transfer Address */ +#define XFER_ADDR 0x014 + #define XFER_ADDR_MASK (0x7FF) + #define MAX_XFER_COUNT 0x20000u +/* Transfer Control */ +#define XFER_CTR 0x01C + #define XFER_COUNT_MASK (0x3FFFF) + #define ADDR_INC_DISABLE (1 << 24) + #define XFER_WIDTH_MASK (1 << 25) + #define XFER_WIDTH_8B (0) + #define XFER_WIDTH_16B (1 << 25) + + #define MEM_TYPE_MASK (1 << 26) + #define MEM_TYPE_COMMON (0) + #define MEM_TYPE_ATTRIBUTE (1 << 26) + + #define MEM_IO_XFER_MASK (1 << 27) + #define MEM_XFER (0) + #define IO_XFER (1 << 27) + + #define DMA_XFER_MODE (1 << 28) + + #define AHB_BUS_NORMAL_PIO_OPRTN (~(1 << 29)) + #define XFER_DIR_MASK (1 << 30) + #define XFER_READ (0) + #define XFER_WRITE (1 << 30) + + #define XFER_START (1 << 31) +/* Write Data Port */ +#define WRITE_PORT 0x024 +/* Read Data Port */ +#define READ_PORT 0x028 +/* ATA Data Port */ +#define ATA_DATA_PORT 0x030 + #define ATA_DATA_PORT_MASK (0xFFFF) +/* ATA Error/Features */ +#define ATA_ERR_FTR 0x034 +/* ATA Sector Count */ +#define ATA_SC 0x038 +/* ATA Sector Number */ +#define ATA_SN 0x03C +/* ATA Cylinder Low */ +#define ATA_CL 0x040 +/* ATA Cylinder High */ +#define ATA_CH 0x044 +/* ATA Select Card/Head */ +#define ATA_SH 0x048 +/* ATA Status-Command */ +#define ATA_STS_CMD 0x04C +/* ATA Alternate Status/Device Control */ +#define ATA_ASTS_DCTR 0x050 +/* Extended Write Data Port 0x200-0x3FC */ +#define EXT_WRITE_PORT 0x200 +/* Extended Read Data Port 0x400-0x5FC */ +#define EXT_READ_PORT 0x400 + #define FIFO_SIZE 0x200u +/* Global Interrupt Status */ +#define GIRQ_STS 0x800 +/* Global Interrupt Status enable */ +#define GIRQ_STS_EN 0x804 +/* Global Interrupt Signal enable */ +#define GIRQ_SGN_EN 0x808 + #define GIRQ_CF (1) + #define GIRQ_XD (1 << 1) + +/* Compact Flash Controller Dev Structure */ +struct arasan_cf_dev { + /* pointer to ata_host structure */ + struct ata_host *host; + /* clk structure */ + struct clk *clk; + + /* physical base address of controller */ + dma_addr_t pbase; + /* virtual base address of controller */ + void __iomem *vbase; + /* irq number*/ + int irq; + + /* status to be updated to framework regarding DMA transfer */ + u8 dma_status; + /* Card is present or Not */ + u8 card_present; + + /* dma specific */ + /* Completion for transfer complete interrupt from controller */ + struct completion cf_completion; + /* Completion for DMA transfer complete. */ + struct completion dma_completion; + /* Dma channel allocated */ + struct dma_chan *dma_chan; + /* Mask for DMA transfers */ + dma_cap_mask_t mask; + /* DMA transfer work */ + struct work_struct work; + /* DMA delayed finish work */ + struct delayed_work dwork; + /* qc to be transferred using DMA */ + struct ata_queued_cmd *qc; +}; + +static struct scsi_host_template arasan_cf_sht = { + ATA_BASE_SHT(DRIVER_NAME), + .sg_tablesize = SG_NONE, + .dma_boundary = 0xFFFFFFFFUL, +}; + +static void cf_dumpregs(struct arasan_cf_dev *acdev) +{ + struct device *dev = acdev->host->dev; + + dev_dbg(dev, ": =========== REGISTER DUMP ==========="); + dev_dbg(dev, ": CFI_STS: %x", readl(acdev->vbase + CFI_STS)); + dev_dbg(dev, ": IRQ_STS: %x", readl(acdev->vbase + IRQ_STS)); + dev_dbg(dev, ": IRQ_EN: %x", readl(acdev->vbase + IRQ_EN)); + dev_dbg(dev, ": OP_MODE: %x", readl(acdev->vbase + OP_MODE)); + dev_dbg(dev, ": CLK_CFG: %x", readl(acdev->vbase + CLK_CFG)); + dev_dbg(dev, ": TM_CFG: %x", readl(acdev->vbase + TM_CFG)); + dev_dbg(dev, ": XFER_CTR: %x", readl(acdev->vbase + XFER_CTR)); + dev_dbg(dev, ": GIRQ_STS: %x", readl(acdev->vbase + GIRQ_STS)); + dev_dbg(dev, ": GIRQ_STS_EN: %x", readl(acdev->vbase + GIRQ_STS_EN)); + dev_dbg(dev, ": GIRQ_SGN_EN: %x", readl(acdev->vbase + GIRQ_SGN_EN)); + dev_dbg(dev, ": ====================================="); +} + +/* Enable/Disable global interrupts shared between CF and XD ctrlr. */ +static void cf_ginterrupt_enable(struct arasan_cf_dev *acdev, bool enable) +{ + /* enable should be 0 or 1 */ + writel(enable, acdev->vbase + GIRQ_STS_EN); + writel(enable, acdev->vbase + GIRQ_SGN_EN); +} + +/* Enable/Disable CF interrupts */ +static inline void +cf_interrupt_enable(struct arasan_cf_dev *acdev, u32 mask, bool enable) +{ + u32 val = readl(acdev->vbase + IRQ_EN); + /* clear & enable/disable irqs */ + if (enable) { + writel(mask, acdev->vbase + IRQ_STS); + writel(val | mask, acdev->vbase + IRQ_EN); + } else + writel(val & ~mask, acdev->vbase + IRQ_EN); +} + +static inline void cf_card_reset(struct arasan_cf_dev *acdev) +{ + u32 val = readl(acdev->vbase + OP_MODE); + + writel(val | CARD_RESET, acdev->vbase + OP_MODE); + udelay(200); + writel(val & ~CARD_RESET, acdev->vbase + OP_MODE); +} + +static inline void cf_ctrl_reset(struct arasan_cf_dev *acdev) +{ + writel(readl(acdev->vbase + OP_MODE) & ~CFHOST_ENB, + acdev->vbase + OP_MODE); + writel(readl(acdev->vbase + OP_MODE) | CFHOST_ENB, + acdev->vbase + OP_MODE); +} + +static void cf_card_detect(struct arasan_cf_dev *acdev, bool hotplugged) +{ + struct ata_port *ap = acdev->host->ports[0]; + struct ata_eh_info *ehi = &ap->link.eh_info; + u32 val = readl(acdev->vbase + CFI_STS); + + /* Both CD1 & CD2 should be low if card inserted completely */ + if (!(val & (CARD_DETECT1 | CARD_DETECT2))) { + if (acdev->card_present) + return; + acdev->card_present = 1; + cf_card_reset(acdev); + } else { + if (!acdev->card_present) + return; + acdev->card_present = 0; + } + + if (hotplugged) { + ata_ehi_hotplugged(ehi); + ata_port_freeze(ap); + } +} + +static int cf_init(struct arasan_cf_dev *acdev) +{ + struct arasan_cf_pdata *pdata = dev_get_platdata(acdev->host->dev); + unsigned int if_clk; + unsigned long flags; + int ret = 0; + + ret = clk_prepare_enable(acdev->clk); + if (ret) { + dev_dbg(acdev->host->dev, "clock enable failed"); + return ret; + } + + ret = clk_set_rate(acdev->clk, 166000000); + if (ret) { + dev_warn(acdev->host->dev, "clock set rate failed"); + clk_disable_unprepare(acdev->clk); + return ret; + } + + spin_lock_irqsave(&acdev->host->lock, flags); + /* configure CF interface clock */ + /* TODO: read from device tree */ + if_clk = CF_IF_CLK_166M; + if (pdata && pdata->cf_if_clk <= CF_IF_CLK_200M) + if_clk = pdata->cf_if_clk; + + writel(if_clk, acdev->vbase + CLK_CFG); + + writel(TRUE_IDE_MODE | CFHOST_ENB, acdev->vbase + OP_MODE); + cf_interrupt_enable(acdev, CARD_DETECT_IRQ, 1); + cf_ginterrupt_enable(acdev, 1); + spin_unlock_irqrestore(&acdev->host->lock, flags); + + return ret; +} + +static void cf_exit(struct arasan_cf_dev *acdev) +{ + unsigned long flags; + + spin_lock_irqsave(&acdev->host->lock, flags); + cf_ginterrupt_enable(acdev, 0); + cf_interrupt_enable(acdev, TRUE_IDE_IRQS, 0); + cf_card_reset(acdev); + writel(readl(acdev->vbase + OP_MODE) & ~CFHOST_ENB, + acdev->vbase + OP_MODE); + spin_unlock_irqrestore(&acdev->host->lock, flags); + clk_disable_unprepare(acdev->clk); +} + +static void dma_callback(void *dev) +{ + struct arasan_cf_dev *acdev = dev; + + complete(&acdev->dma_completion); +} + +static inline void dma_complete(struct arasan_cf_dev *acdev) +{ + struct ata_queued_cmd *qc = acdev->qc; + unsigned long flags; + + acdev->qc = NULL; + ata_sff_interrupt(acdev->irq, acdev->host); + + spin_lock_irqsave(&acdev->host->lock, flags); + if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol)) + ata_ehi_push_desc(&qc->ap->link.eh_info, "DMA Failed: Timeout"); + spin_unlock_irqrestore(&acdev->host->lock, flags); +} + +static inline int wait4buf(struct arasan_cf_dev *acdev) +{ + if (!wait_for_completion_timeout(&acdev->cf_completion, TIMEOUT)) { + u32 rw = acdev->qc->tf.flags & ATA_TFLAG_WRITE; + + dev_err(acdev->host->dev, "%s TimeOut", rw ? "write" : "read"); + return -ETIMEDOUT; + } + + /* Check if PIO Error interrupt has occurred */ + if (acdev->dma_status & ATA_DMA_ERR) + return -EAGAIN; + + return 0; +} + +static int +dma_xfer(struct arasan_cf_dev *acdev, dma_addr_t src, dma_addr_t dest, u32 len) +{ + struct dma_async_tx_descriptor *tx; + struct dma_chan *chan = acdev->dma_chan; + dma_cookie_t cookie; + unsigned long flags = DMA_PREP_INTERRUPT; + int ret = 0; + + tx = chan->device->device_prep_dma_memcpy(chan, dest, src, len, flags); + if (!tx) { + dev_err(acdev->host->dev, "device_prep_dma_memcpy failed\n"); + return -EAGAIN; + } + + tx->callback = dma_callback; + tx->callback_param = acdev; + cookie = tx->tx_submit(tx); + + ret = dma_submit_error(cookie); + if (ret) { + dev_err(acdev->host->dev, "dma_submit_error\n"); + return ret; + } + + chan->device->device_issue_pending(chan); + + /* Wait for DMA to complete */ + if (!wait_for_completion_timeout(&acdev->dma_completion, TIMEOUT)) { + dmaengine_terminate_all(chan); + dev_err(acdev->host->dev, "wait_for_completion_timeout\n"); + return -ETIMEDOUT; + } + + return ret; +} + +static int sg_xfer(struct arasan_cf_dev *acdev, struct scatterlist *sg) +{ + dma_addr_t dest = 0, src = 0; + u32 xfer_cnt, sglen, dma_len, xfer_ctr; + u32 write = acdev->qc->tf.flags & ATA_TFLAG_WRITE; + unsigned long flags; + int ret = 0; + + sglen = sg_dma_len(sg); + if (write) { + src = sg_dma_address(sg); + dest = acdev->pbase + EXT_WRITE_PORT; + } else { + dest = sg_dma_address(sg); + src = acdev->pbase + EXT_READ_PORT; + } + + /* + * For each sg: + * MAX_XFER_COUNT data will be transferred before we get transfer + * complete interrupt. Between after FIFO_SIZE data + * buffer available interrupt will be generated. At this time we will + * fill FIFO again: max FIFO_SIZE data. + */ + while (sglen) { + xfer_cnt = min(sglen, MAX_XFER_COUNT); + spin_lock_irqsave(&acdev->host->lock, flags); + xfer_ctr = readl(acdev->vbase + XFER_CTR) & + ~XFER_COUNT_MASK; + writel(xfer_ctr | xfer_cnt | XFER_START, + acdev->vbase + XFER_CTR); + spin_unlock_irqrestore(&acdev->host->lock, flags); + + /* continue dma xfers until current sg is completed */ + while (xfer_cnt) { + /* wait for read to complete */ + if (!write) { + ret = wait4buf(acdev); + if (ret) + goto fail; + } + + /* read/write FIFO in chunk of FIFO_SIZE */ + dma_len = min(xfer_cnt, FIFO_SIZE); + ret = dma_xfer(acdev, src, dest, dma_len); + if (ret) { + dev_err(acdev->host->dev, "dma failed"); + goto fail; + } + + if (write) + src += dma_len; + else + dest += dma_len; + + sglen -= dma_len; + xfer_cnt -= dma_len; + + /* wait for write to complete */ + if (write) { + ret = wait4buf(acdev); + if (ret) + goto fail; + } + } + } + +fail: + spin_lock_irqsave(&acdev->host->lock, flags); + writel(readl(acdev->vbase + XFER_CTR) & ~XFER_START, + acdev->vbase + XFER_CTR); + spin_unlock_irqrestore(&acdev->host->lock, flags); + + return ret; +} + +/* + * This routine uses External DMA controller to read/write data to FIFO of CF + * controller. There are two xfer related interrupt supported by CF controller: + * - buf_avail: This interrupt is generated as soon as we have buffer of 512 + * bytes available for reading or empty buffer available for writing. + * - xfer_done: This interrupt is generated on transfer of "xfer_size" amount of + * data to/from FIFO. xfer_size is programmed in XFER_CTR register. + * + * Max buffer size = FIFO_SIZE = 512 Bytes. + * Max xfer_size = MAX_XFER_COUNT = 256 KB. + */ +static void data_xfer(struct work_struct *work) +{ + struct arasan_cf_dev *acdev = container_of(work, struct arasan_cf_dev, + work); + struct ata_queued_cmd *qc = acdev->qc; + struct scatterlist *sg; + unsigned long flags; + u32 temp; + int ret = 0; + + /* request dma channels */ + /* dma_request_channel may sleep, so calling from process context */ + acdev->dma_chan = dma_request_slave_channel(acdev->host->dev, "data"); + if (!acdev->dma_chan) { + dev_err(acdev->host->dev, "Unable to get dma_chan\n"); + goto chan_request_fail; + } + + for_each_sg(qc->sg, sg, qc->n_elem, temp) { + ret = sg_xfer(acdev, sg); + if (ret) + break; + } + + dma_release_channel(acdev->dma_chan); + + /* data xferred successfully */ + if (!ret) { + u32 status; + + spin_lock_irqsave(&acdev->host->lock, flags); + status = ioread8(qc->ap->ioaddr.altstatus_addr); + spin_unlock_irqrestore(&acdev->host->lock, flags); + if (status & (ATA_BUSY | ATA_DRQ)) { + ata_sff_queue_delayed_work(&acdev->dwork, 1); + return; + } + + goto sff_intr; + } + + cf_dumpregs(acdev); + +chan_request_fail: + spin_lock_irqsave(&acdev->host->lock, flags); + /* error when transferring data to/from memory */ + qc->err_mask |= AC_ERR_HOST_BUS; + qc->ap->hsm_task_state = HSM_ST_ERR; + + cf_ctrl_reset(acdev); + spin_unlock_irqrestore(qc->ap->lock, flags); +sff_intr: + dma_complete(acdev); +} + +static void delayed_finish(struct work_struct *work) +{ + struct arasan_cf_dev *acdev = container_of(work, struct arasan_cf_dev, + dwork.work); + struct ata_queued_cmd *qc = acdev->qc; + unsigned long flags; + u8 status; + + spin_lock_irqsave(&acdev->host->lock, flags); + status = ioread8(qc->ap->ioaddr.altstatus_addr); + spin_unlock_irqrestore(&acdev->host->lock, flags); + + if (status & (ATA_BUSY | ATA_DRQ)) + ata_sff_queue_delayed_work(&acdev->dwork, 1); + else + dma_complete(acdev); +} + +static irqreturn_t arasan_cf_interrupt(int irq, void *dev) +{ + struct arasan_cf_dev *acdev = ((struct ata_host *)dev)->private_data; + unsigned long flags; + u32 irqsts; + + irqsts = readl(acdev->vbase + GIRQ_STS); + if (!(irqsts & GIRQ_CF)) + return IRQ_NONE; + + spin_lock_irqsave(&acdev->host->lock, flags); + irqsts = readl(acdev->vbase + IRQ_STS); + writel(irqsts, acdev->vbase + IRQ_STS); /* clear irqs */ + writel(GIRQ_CF, acdev->vbase + GIRQ_STS); /* clear girqs */ + + /* handle only relevant interrupts */ + irqsts &= ~IGNORED_IRQS; + + if (irqsts & CARD_DETECT_IRQ) { + cf_card_detect(acdev, 1); + spin_unlock_irqrestore(&acdev->host->lock, flags); + return IRQ_HANDLED; + } + + if (irqsts & PIO_XFER_ERR_IRQ) { + acdev->dma_status = ATA_DMA_ERR; + writel(readl(acdev->vbase + XFER_CTR) & ~XFER_START, + acdev->vbase + XFER_CTR); + spin_unlock_irqrestore(&acdev->host->lock, flags); + complete(&acdev->cf_completion); + dev_err(acdev->host->dev, "pio xfer err irq\n"); + return IRQ_HANDLED; + } + + spin_unlock_irqrestore(&acdev->host->lock, flags); + + if (irqsts & BUF_AVAIL_IRQ) { + complete(&acdev->cf_completion); + return IRQ_HANDLED; + } + + if (irqsts & XFER_DONE_IRQ) { + struct ata_queued_cmd *qc = acdev->qc; + + /* Send Complete only for write */ + if (qc->tf.flags & ATA_TFLAG_WRITE) + complete(&acdev->cf_completion); + } + + return IRQ_HANDLED; +} + +static void arasan_cf_freeze(struct ata_port *ap) +{ + struct arasan_cf_dev *acdev = ap->host->private_data; + + /* stop transfer and reset controller */ + writel(readl(acdev->vbase + XFER_CTR) & ~XFER_START, + acdev->vbase + XFER_CTR); + cf_ctrl_reset(acdev); + acdev->dma_status = ATA_DMA_ERR; + + ata_sff_dma_pause(ap); + ata_sff_freeze(ap); +} + +static void arasan_cf_error_handler(struct ata_port *ap) +{ + struct arasan_cf_dev *acdev = ap->host->private_data; + + /* + * DMA transfers using an external DMA controller may be scheduled. + * Abort them before handling error. Refer data_xfer() for further + * details. + */ + cancel_work_sync(&acdev->work); + cancel_delayed_work_sync(&acdev->dwork); + return ata_sff_error_handler(ap); +} + +static void arasan_cf_dma_start(struct arasan_cf_dev *acdev) +{ + struct ata_queued_cmd *qc = acdev->qc; + struct ata_port *ap = qc->ap; + struct ata_taskfile *tf = &qc->tf; + u32 xfer_ctr = readl(acdev->vbase + XFER_CTR) & ~XFER_DIR_MASK; + u32 write = tf->flags & ATA_TFLAG_WRITE; + + xfer_ctr |= write ? XFER_WRITE : XFER_READ; + writel(xfer_ctr, acdev->vbase + XFER_CTR); + + ap->ops->sff_exec_command(ap, tf); + ata_sff_queue_work(&acdev->work); +} + +static unsigned int arasan_cf_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct arasan_cf_dev *acdev = ap->host->private_data; + + /* defer PIO handling to sff_qc_issue */ + if (!ata_is_dma(qc->tf.protocol)) + return ata_sff_qc_issue(qc); + + /* select the device */ + ata_wait_idle(ap); + ata_sff_dev_select(ap, qc->dev->devno); + ata_wait_idle(ap); + + /* start the command */ + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING); + + ap->ops->sff_tf_load(ap, &qc->tf); + acdev->dma_status = 0; + acdev->qc = qc; + arasan_cf_dma_start(acdev); + ap->hsm_task_state = HSM_ST_LAST; + break; + + default: + WARN_ON(1); + return AC_ERR_SYSTEM; + } + + return 0; +} + +static void arasan_cf_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct arasan_cf_dev *acdev = ap->host->private_data; + u8 pio = adev->pio_mode - XFER_PIO_0; + unsigned long flags; + u32 val; + + /* Arasan ctrl supports Mode0 -> Mode6 */ + if (pio > 6) { + dev_err(ap->dev, "Unknown PIO mode\n"); + return; + } + + spin_lock_irqsave(&acdev->host->lock, flags); + val = readl(acdev->vbase + OP_MODE) & + ~(ULTRA_DMA_ENB | MULTI_WORD_DMA_ENB | DRQ_BLOCK_SIZE_MASK); + writel(val, acdev->vbase + OP_MODE); + val = readl(acdev->vbase + TM_CFG) & ~TRUEIDE_PIO_TIMING_MASK; + val |= pio << TRUEIDE_PIO_TIMING_SHIFT; + writel(val, acdev->vbase + TM_CFG); + + cf_interrupt_enable(acdev, BUF_AVAIL_IRQ | XFER_DONE_IRQ, 0); + cf_interrupt_enable(acdev, PIO_XFER_ERR_IRQ, 1); + spin_unlock_irqrestore(&acdev->host->lock, flags); +} + +static void arasan_cf_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct arasan_cf_dev *acdev = ap->host->private_data; + u32 opmode, tmcfg, dma_mode = adev->dma_mode; + unsigned long flags; + + spin_lock_irqsave(&acdev->host->lock, flags); + opmode = readl(acdev->vbase + OP_MODE) & + ~(MULTI_WORD_DMA_ENB | ULTRA_DMA_ENB); + tmcfg = readl(acdev->vbase + TM_CFG); + + if ((dma_mode >= XFER_UDMA_0) && (dma_mode <= XFER_UDMA_6)) { + opmode |= ULTRA_DMA_ENB; + tmcfg &= ~ULTRA_DMA_TIMING_MASK; + tmcfg |= (dma_mode - XFER_UDMA_0) << ULTRA_DMA_TIMING_SHIFT; + } else if ((dma_mode >= XFER_MW_DMA_0) && (dma_mode <= XFER_MW_DMA_4)) { + opmode |= MULTI_WORD_DMA_ENB; + tmcfg &= ~TRUEIDE_MWORD_DMA_TIMING_MASK; + tmcfg |= (dma_mode - XFER_MW_DMA_0) << + TRUEIDE_MWORD_DMA_TIMING_SHIFT; + } else { + dev_err(ap->dev, "Unknown DMA mode\n"); + spin_unlock_irqrestore(&acdev->host->lock, flags); + return; + } + + writel(opmode, acdev->vbase + OP_MODE); + writel(tmcfg, acdev->vbase + TM_CFG); + writel(DMA_XFER_MODE, acdev->vbase + XFER_CTR); + + cf_interrupt_enable(acdev, PIO_XFER_ERR_IRQ, 0); + cf_interrupt_enable(acdev, BUF_AVAIL_IRQ | XFER_DONE_IRQ, 1); + spin_unlock_irqrestore(&acdev->host->lock, flags); +} + +static struct ata_port_operations arasan_cf_ops = { + .inherits = &ata_sff_port_ops, + .freeze = arasan_cf_freeze, + .error_handler = arasan_cf_error_handler, + .qc_issue = arasan_cf_qc_issue, + .set_piomode = arasan_cf_set_piomode, + .set_dmamode = arasan_cf_set_dmamode, +}; + +static int arasan_cf_probe(struct platform_device *pdev) +{ + struct arasan_cf_dev *acdev; + struct arasan_cf_pdata *pdata = dev_get_platdata(&pdev->dev); + struct ata_host *host; + struct ata_port *ap; + struct resource *res; + u32 quirk; + irq_handler_t irq_handler = NULL; + int ret = 0; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res), + DRIVER_NAME)) { + dev_warn(&pdev->dev, "Failed to get memory region resource\n"); + return -ENOENT; + } + + acdev = devm_kzalloc(&pdev->dev, sizeof(*acdev), GFP_KERNEL); + if (!acdev) { + dev_warn(&pdev->dev, "kzalloc fail\n"); + return -ENOMEM; + } + + if (pdata) + quirk = pdata->quirk; + else + quirk = CF_BROKEN_UDMA; /* as it is on spear1340 */ + + /* if irq is 0, support only PIO */ + acdev->irq = platform_get_irq(pdev, 0); + if (acdev->irq) + irq_handler = arasan_cf_interrupt; + else + quirk |= CF_BROKEN_MWDMA | CF_BROKEN_UDMA; + + acdev->pbase = res->start; + acdev->vbase = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!acdev->vbase) { + dev_warn(&pdev->dev, "ioremap fail\n"); + return -ENOMEM; + } + + acdev->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(acdev->clk)) { + dev_warn(&pdev->dev, "Clock not found\n"); + return PTR_ERR(acdev->clk); + } + + /* allocate host */ + host = ata_host_alloc(&pdev->dev, 1); + if (!host) { + ret = -ENOMEM; + dev_warn(&pdev->dev, "alloc host fail\n"); + goto free_clk; + } + + ap = host->ports[0]; + host->private_data = acdev; + acdev->host = host; + ap->ops = &arasan_cf_ops; + ap->pio_mask = ATA_PIO6; + ap->mwdma_mask = ATA_MWDMA4; + ap->udma_mask = ATA_UDMA6; + + init_completion(&acdev->cf_completion); + init_completion(&acdev->dma_completion); + INIT_WORK(&acdev->work, data_xfer); + INIT_DELAYED_WORK(&acdev->dwork, delayed_finish); + dma_cap_set(DMA_MEMCPY, acdev->mask); + + /* Handle platform specific quirks */ + if (quirk) { + if (quirk & CF_BROKEN_PIO) { + ap->ops->set_piomode = NULL; + ap->pio_mask = 0; + } + if (quirk & CF_BROKEN_MWDMA) + ap->mwdma_mask = 0; + if (quirk & CF_BROKEN_UDMA) + ap->udma_mask = 0; + } + ap->flags |= ATA_FLAG_PIO_POLLING | ATA_FLAG_NO_ATAPI; + + ap->ioaddr.cmd_addr = acdev->vbase + ATA_DATA_PORT; + ap->ioaddr.data_addr = acdev->vbase + ATA_DATA_PORT; + ap->ioaddr.error_addr = acdev->vbase + ATA_ERR_FTR; + ap->ioaddr.feature_addr = acdev->vbase + ATA_ERR_FTR; + ap->ioaddr.nsect_addr = acdev->vbase + ATA_SC; + ap->ioaddr.lbal_addr = acdev->vbase + ATA_SN; + ap->ioaddr.lbam_addr = acdev->vbase + ATA_CL; + ap->ioaddr.lbah_addr = acdev->vbase + ATA_CH; + ap->ioaddr.device_addr = acdev->vbase + ATA_SH; + ap->ioaddr.status_addr = acdev->vbase + ATA_STS_CMD; + ap->ioaddr.command_addr = acdev->vbase + ATA_STS_CMD; + ap->ioaddr.altstatus_addr = acdev->vbase + ATA_ASTS_DCTR; + ap->ioaddr.ctl_addr = acdev->vbase + ATA_ASTS_DCTR; + + ata_port_desc(ap, "phy_addr %llx virt_addr %p", + (unsigned long long) res->start, acdev->vbase); + + ret = cf_init(acdev); + if (ret) + goto free_clk; + + cf_card_detect(acdev, 0); + + ret = ata_host_activate(host, acdev->irq, irq_handler, 0, + &arasan_cf_sht); + if (!ret) + return 0; + + cf_exit(acdev); +free_clk: + clk_put(acdev->clk); + return ret; +} + +static int arasan_cf_remove(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + struct arasan_cf_dev *acdev = host->ports[0]->private_data; + + ata_host_detach(host); + cf_exit(acdev); + clk_put(acdev->clk); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int arasan_cf_suspend(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct arasan_cf_dev *acdev = host->ports[0]->private_data; + + if (acdev->dma_chan) + dmaengine_terminate_all(acdev->dma_chan); + + cf_exit(acdev); + return ata_host_suspend(host, PMSG_SUSPEND); +} + +static int arasan_cf_resume(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct arasan_cf_dev *acdev = host->ports[0]->private_data; + + cf_init(acdev); + ata_host_resume(host); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(arasan_cf_pm_ops, arasan_cf_suspend, arasan_cf_resume); + +#ifdef CONFIG_OF +static const struct of_device_id arasan_cf_id_table[] = { + { .compatible = "arasan,cf-spear1340" }, + {} +}; +MODULE_DEVICE_TABLE(of, arasan_cf_id_table); +#endif + +static struct platform_driver arasan_cf_driver = { + .probe = arasan_cf_probe, + .remove = arasan_cf_remove, + .driver = { + .name = DRIVER_NAME, + .pm = &arasan_cf_pm_ops, + .of_match_table = of_match_ptr(arasan_cf_id_table), + }, +}; + +module_platform_driver(arasan_cf_driver); + +MODULE_AUTHOR("Viresh Kumar "); +MODULE_DESCRIPTION("Arasan ATA Compact Flash driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c new file mode 100644 index 000000000..96c05c949 --- /dev/null +++ b/drivers/ata/pata_artop.c @@ -0,0 +1,459 @@ +/* + * pata_artop.c - ARTOP ATA controller driver + * + * (C) 2006 Red Hat + * (C) 2007,2011 Bartlomiej Zolnierkiewicz + * + * Based in part on drivers/ide/pci/aec62xx.c + * Copyright (C) 1999-2002 Andre Hedrick + * 865/865R fixes for Macintosh card version from a patch to the old + * driver by Thibaut VARENE + * When setting the PCI latency we must set 0x80 or higher for burst + * performance Alessandro Zummo + * + * TODO + * Investigate no_dsc on 850R + * Clock detect + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_artop" +#define DRV_VERSION "0.4.6" + +/* + * The ARTOP has 33 Mhz and "over clocked" timing tables. Until we + * get PCI bus speed functionality we leave this as 0. Its a variable + * for when we get the functionality and also for folks wanting to + * test stuff. + */ + +static int clock = 0; + +/** + * artop62x0_pre_reset - probe begin + * @link: link + * @deadline: deadline jiffies for the operation + * + * Nothing complicated needed here. + */ + +static int artop62x0_pre_reset(struct ata_link *link, unsigned long deadline) +{ + static const struct pci_bits artop_enable_bits[] = { + { 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */ + { 0x4AU, 1U, 0x04UL, 0x04UL }, /* port 1 */ + }; + + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + /* Odd numbered device ids are the units with enable bits. */ + if ((pdev->device & 1) && + !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + +/** + * artop6260_cable_detect - identify cable type + * @ap: Port + * + * Identify the cable type for the ARTOP interface in question + */ + +static int artop6260_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 tmp; + pci_read_config_byte(pdev, 0x49, &tmp); + if (tmp & (1 << ap->port_no)) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + +/** + * artop6210_load_piomode - Load a set of PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device + * @pio: PIO mode + * + * Set PIO mode for device, in host controller PCI config space. This + * is used both to set PIO timings in PIO mode and also to set the + * matching PIO clocking for UDMA, as well as the MWDMA timings. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6210_load_piomode(struct ata_port *ap, struct ata_device *adev, unsigned int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = adev->devno + 2 * ap->port_no; + const u16 timing[2][5] = { + { 0x0000, 0x000A, 0x0008, 0x0303, 0x0301 }, + { 0x0700, 0x070A, 0x0708, 0x0403, 0x0401 } + + }; + /* Load the PIO timing active/recovery bits */ + pci_write_config_word(pdev, 0x40 + 2 * dn, timing[clock][pio]); +} + +/** + * artop6210_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring + * + * Set PIO mode for device, in host controller PCI config space. For + * ARTOP we must also clear the UDMA bits if we are not doing UDMA. In + * the event UDMA is used the later call to set_dmamode will set the + * bits as required. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6210_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = adev->devno + 2 * ap->port_no; + u8 ultra; + + artop6210_load_piomode(ap, adev, adev->pio_mode - XFER_PIO_0); + + /* Clear the UDMA mode bits (set_dmamode will redo this if needed) */ + pci_read_config_byte(pdev, 0x54, &ultra); + ultra &= ~(3 << (2 * dn)); + pci_write_config_byte(pdev, 0x54, ultra); +} + +/** + * artop6260_load_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring + * @pio: PIO mode + * + * Set PIO mode for device, in host controller PCI config space. The + * ARTOP6260 and relatives store the timing data differently. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6260_load_piomode (struct ata_port *ap, struct ata_device *adev, unsigned int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = adev->devno + 2 * ap->port_no; + const u8 timing[2][5] = { + { 0x00, 0x0A, 0x08, 0x33, 0x31 }, + { 0x70, 0x7A, 0x78, 0x43, 0x41 } + + }; + /* Load the PIO timing active/recovery bits */ + pci_write_config_byte(pdev, 0x40 + dn, timing[clock][pio]); +} + +/** + * artop6260_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring + * + * Set PIO mode for device, in host controller PCI config space. For + * ARTOP we must also clear the UDMA bits if we are not doing UDMA. In + * the event UDMA is used the later call to set_dmamode will set the + * bits as required. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6260_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ultra; + + artop6260_load_piomode(ap, adev, adev->pio_mode - XFER_PIO_0); + + /* Clear the UDMA mode bits (set_dmamode will redo this if needed) */ + pci_read_config_byte(pdev, 0x44 + ap->port_no, &ultra); + ultra &= ~(7 << (4 * adev->devno)); /* One nibble per drive */ + pci_write_config_byte(pdev, 0x44 + ap->port_no, ultra); +} + +/** + * artop6210_set_dmamode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device whose timings we are configuring + * + * Set DMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6210_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = adev->devno + 2 * ap->port_no; + u8 ultra; + + if (adev->dma_mode == XFER_MW_DMA_0) + pio = 1; + else + pio = 4; + + /* Load the PIO timing active/recovery bits */ + artop6210_load_piomode(ap, adev, pio); + + pci_read_config_byte(pdev, 0x54, &ultra); + ultra &= ~(3 << (2 * dn)); + + /* Add ultra DMA bits if in UDMA mode */ + if (adev->dma_mode >= XFER_UDMA_0) { + u8 mode = (adev->dma_mode - XFER_UDMA_0) + 1 - clock; + if (mode == 0) + mode = 1; + ultra |= (mode << (2 * dn)); + } + pci_write_config_byte(pdev, 0x54, ultra); +} + +/** + * artop6260_set_dmamode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring + * + * Set DMA mode for device, in host controller PCI config space. The + * ARTOP6260 and relatives store the timing data differently. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6260_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ultra; + + if (adev->dma_mode == XFER_MW_DMA_0) + pio = 1; + else + pio = 4; + + /* Load the PIO timing active/recovery bits */ + artop6260_load_piomode(ap, adev, pio); + + /* Add ultra DMA bits if in UDMA mode */ + pci_read_config_byte(pdev, 0x44 + ap->port_no, &ultra); + ultra &= ~(7 << (4 * adev->devno)); /* One nibble per drive */ + if (adev->dma_mode >= XFER_UDMA_0) { + u8 mode = adev->dma_mode - XFER_UDMA_0 + 1 - clock; + if (mode == 0) + mode = 1; + ultra |= (mode << (4 * adev->devno)); + } + pci_write_config_byte(pdev, 0x44 + ap->port_no, ultra); +} + +/** + * artop_6210_qc_defer - implement serialization + * @qc: command + * + * Issue commands per host on this chip. + */ + +static int artop6210_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_host *host = qc->ap->host; + struct ata_port *alt = host->ports[1 ^ qc->ap->port_no]; + int rc; + + /* First apply the usual rules */ + rc = ata_std_qc_defer(qc); + if (rc != 0) + return rc; + + /* Now apply serialization rules. Only allow a command if the + other channel state machine is idle */ + if (alt && alt->qc_active) + return ATA_DEFER_PORT; + return 0; +} + +static struct scsi_host_template artop_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations artop6210_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = ata_cable_40wire, + .set_piomode = artop6210_set_piomode, + .set_dmamode = artop6210_set_dmamode, + .prereset = artop62x0_pre_reset, + .qc_defer = artop6210_qc_defer, +}; + +static struct ata_port_operations artop6260_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = artop6260_cable_detect, + .set_piomode = artop6260_set_piomode, + .set_dmamode = artop6260_set_dmamode, + .prereset = artop62x0_pre_reset, +}; + +static void atp8xx_fixup(struct pci_dev *pdev) +{ + if (pdev->device == 0x0005) + /* BIOS may have left us in UDMA, clear it before libata probe */ + pci_write_config_byte(pdev, 0x54, 0); + else if (pdev->device == 0x0008 || pdev->device == 0x0009) { + u8 reg; + + /* Mac systems come up with some registers not set as we + will need them */ + + /* Clear reset & test bits */ + pci_read_config_byte(pdev, 0x49, ®); + pci_write_config_byte(pdev, 0x49, reg & ~0x30); + + /* PCI latency must be > 0x80 for burst mode, tweak it + * if required. + */ + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, ®); + if (reg <= 0x80) + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x90); + + /* Enable IRQ output and burst mode */ + pci_read_config_byte(pdev, 0x4a, ®); + pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80); + } +} + +/** + * artop_init_one - Register ARTOP ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in artop_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info info_6210 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, + .port_ops = &artop6210_ops, + }; + static const struct ata_port_info info_626x = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, + .port_ops = &artop6260_ops, + }; + static const struct ata_port_info info_628x = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &artop6260_ops, + }; + static const struct ata_port_info info_628x_fast = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &artop6260_ops, + }; + const struct ata_port_info *ppi[] = { NULL, NULL }; + int rc; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + if (id->driver_data == 0) /* 6210 variant */ + ppi[0] = &info_6210; + else if (id->driver_data == 1) /* 6260 */ + ppi[0] = &info_626x; + else if (id->driver_data == 2) { /* 6280 or 6280 + fast */ + unsigned long io = pci_resource_start(pdev, 4); + + ppi[0] = &info_628x; + if (inb(io) & 0x10) + ppi[0] = &info_628x_fast; + } + + BUG_ON(ppi[0] == NULL); + + atp8xx_fixup(pdev); + + return ata_pci_bmdma_init_one(pdev, ppi, &artop_sht, NULL, 0); +} + +static const struct pci_device_id artop_pci_tbl[] = { + { PCI_VDEVICE(ARTOP, 0x0005), 0 }, + { PCI_VDEVICE(ARTOP, 0x0006), 1 }, + { PCI_VDEVICE(ARTOP, 0x0007), 1 }, + { PCI_VDEVICE(ARTOP, 0x0008), 2 }, + { PCI_VDEVICE(ARTOP, 0x0009), 2 }, + + { } /* terminate list */ +}; + +#ifdef CONFIG_PM_SLEEP +static int atp8xx_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + atp8xx_fixup(pdev); + + ata_host_resume(host); + return 0; +} +#endif + +static struct pci_driver artop_pci_driver = { + .name = DRV_NAME, + .id_table = artop_pci_tbl, + .probe = artop_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = atp8xx_reinit_one, +#endif +}; + +module_pci_driver(artop_pci_driver); + +MODULE_AUTHOR("Alan Cox, Bartlomiej Zolnierkiewicz"); +MODULE_DESCRIPTION("SCSI low-level driver for ARTOP PATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, artop_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c new file mode 100644 index 000000000..9aeb7a6dd --- /dev/null +++ b/drivers/ata/pata_at32.c @@ -0,0 +1,400 @@ +/* + * AVR32 SMC/CFC PATA Driver + * + * Copyright (C) 2007 Atmel Norway + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#define DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DRV_NAME "pata_at32" +#define DRV_VERSION "0.0.3" + +/* + * CompactFlash controller memory layout relative to the base address: + * + * Attribute memory: 0000 0000 -> 003f ffff + * Common memory: 0040 0000 -> 007f ffff + * I/O memory: 0080 0000 -> 00bf ffff + * True IDE Mode: 00c0 0000 -> 00df ffff + * Alt IDE Mode: 00e0 0000 -> 00ff ffff + * + * Only True IDE and Alt True IDE mode are needed for this driver. + * + * True IDE mode => CS0 = 0, CS1 = 1 (cmd, error, stat, etc) + * Alt True IDE mode => CS0 = 1, CS1 = 0 (ctl, alt_stat) + */ +#define CF_IDE_OFFSET 0x00c00000 +#define CF_ALT_IDE_OFFSET 0x00e00000 +#define CF_RES_SIZE 2048 + +/* + * Define DEBUG_BUS if you are doing debugging of your own EBI -> PATA + * adaptor with a logic analyzer or similar. + */ +#undef DEBUG_BUS + +/* + * ATA PIO modes + * + * Name | Mb/s | Min cycle time | Mask + * --------+-------+----------------+-------- + * Mode 0 | 3.3 | 600 ns | 0x01 + * Mode 1 | 5.2 | 383 ns | 0x03 + * Mode 2 | 8.3 | 240 ns | 0x07 + * Mode 3 | 11.1 | 180 ns | 0x0f + * Mode 4 | 16.7 | 120 ns | 0x1f + * + * Alter PIO_MASK below according to table to set maximal PIO mode. + */ +enum { + PIO_MASK = ATA_PIO4, +}; + +/* + * Struct containing private information about device. + */ +struct at32_ide_info { + unsigned int irq; + struct resource res_ide; + struct resource res_alt; + void __iomem *ide_addr; + void __iomem *alt_addr; + unsigned int cs; + struct smc_config smc; +}; + +/* + * Setup SMC for the given ATA timing. + */ +static int pata_at32_setup_timing(struct device *dev, + struct at32_ide_info *info, + const struct ata_timing *ata) +{ + struct smc_config *smc = &info->smc; + struct smc_timing timing; + + int active; + int recover; + + memset(&timing, 0, sizeof(struct smc_timing)); + + /* Total cycle time */ + timing.read_cycle = ata->cyc8b; + + /* DIOR <= CFIOR timings */ + timing.nrd_setup = ata->setup; + timing.nrd_pulse = ata->act8b; + timing.nrd_recover = ata->rec8b; + + /* Convert nanosecond timing to clock cycles */ + smc_set_timing(smc, &timing); + + /* Add one extra cycle setup due to signal ring */ + smc->nrd_setup = smc->nrd_setup + 1; + + active = smc->nrd_setup + smc->nrd_pulse; + recover = smc->read_cycle - active; + + /* Need at least two cycles recovery */ + if (recover < 2) + smc->read_cycle = active + 2; + + /* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */ + smc->ncs_read_setup = 1; + smc->ncs_read_pulse = smc->read_cycle - 2; + + /* Write timings same as read timings */ + smc->write_cycle = smc->read_cycle; + smc->nwe_setup = smc->nrd_setup; + smc->nwe_pulse = smc->nrd_pulse; + smc->ncs_write_setup = smc->ncs_read_setup; + smc->ncs_write_pulse = smc->ncs_read_pulse; + + /* Do some debugging output of ATA and SMC timings */ + dev_dbg(dev, "ATA: C=%d S=%d P=%d R=%d\n", + ata->cyc8b, ata->setup, ata->act8b, ata->rec8b); + + dev_dbg(dev, "SMC: C=%d S=%d P=%d NS=%d NP=%d\n", + smc->read_cycle, smc->nrd_setup, smc->nrd_pulse, + smc->ncs_read_setup, smc->ncs_read_pulse); + + /* Finally, configure the SMC */ + return smc_set_configuration(info->cs, smc); +} + +/* + * Procedures for libATA. + */ +static void pata_at32_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing timing; + struct at32_ide_info *info = ap->host->private_data; + + int ret; + + /* Compute ATA timing */ + ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0); + if (ret) { + dev_warn(ap->dev, "Failed to compute ATA timing %d\n", ret); + return; + } + + /* Setup SMC to ATA timing */ + ret = pata_at32_setup_timing(ap->dev, info, &timing); + if (ret) { + dev_warn(ap->dev, "Failed to setup ATA timing %d\n", ret); + return; + } +} + +static struct scsi_host_template at32_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations at32_port_ops = { + .inherits = &ata_sff_port_ops, + .cable_detect = ata_cable_40wire, + .set_piomode = pata_at32_set_piomode, +}; + +static int __init pata_at32_init_one(struct device *dev, + struct at32_ide_info *info) +{ + struct ata_host *host; + struct ata_port *ap; + + host = ata_host_alloc(dev, 1); + if (!host) + return -ENOMEM; + + ap = host->ports[0]; + + /* Setup ATA bindings */ + ap->ops = &at32_port_ops; + ap->pio_mask = PIO_MASK; + ap->flags |= ATA_FLAG_SLAVE_POSS; + + /* + * Since all 8-bit taskfile transfers has to go on the lower + * byte of the data bus and there is a bug in the SMC that + * makes it impossible to alter the bus width during runtime, + * we need to hardwire the address signals as follows: + * + * A_IDE(2:0) <= A_EBI(3:1) + * + * This makes all addresses on the EBI even, thus all data + * will be on the lower byte of the data bus. All addresses + * used by libATA need to be altered according to this. + */ + ap->ioaddr.altstatus_addr = info->alt_addr + (0x06 << 1); + ap->ioaddr.ctl_addr = info->alt_addr + (0x06 << 1); + + ap->ioaddr.data_addr = info->ide_addr + (ATA_REG_DATA << 1); + ap->ioaddr.error_addr = info->ide_addr + (ATA_REG_ERR << 1); + ap->ioaddr.feature_addr = info->ide_addr + (ATA_REG_FEATURE << 1); + ap->ioaddr.nsect_addr = info->ide_addr + (ATA_REG_NSECT << 1); + ap->ioaddr.lbal_addr = info->ide_addr + (ATA_REG_LBAL << 1); + ap->ioaddr.lbam_addr = info->ide_addr + (ATA_REG_LBAM << 1); + ap->ioaddr.lbah_addr = info->ide_addr + (ATA_REG_LBAH << 1); + ap->ioaddr.device_addr = info->ide_addr + (ATA_REG_DEVICE << 1); + ap->ioaddr.status_addr = info->ide_addr + (ATA_REG_STATUS << 1); + ap->ioaddr.command_addr = info->ide_addr + (ATA_REG_CMD << 1); + + /* Set info as private data of ATA host */ + host->private_data = info; + + /* Register ATA device and return */ + return ata_host_activate(host, info->irq, ata_sff_interrupt, + IRQF_SHARED | IRQF_TRIGGER_RISING, + &at32_sht); +} + +/* + * This function may come in handy for people analyzing their own + * EBI -> PATA adaptors. + */ +#ifdef DEBUG_BUS + +static void __init pata_at32_debug_bus(struct device *dev, + struct at32_ide_info *info) +{ + const int d1 = 0xff; + const int d2 = 0x00; + + int i; + + /* Write 8-bit values (registers) */ + iowrite8(d1, info->alt_addr + (0x06 << 1)); + iowrite8(d2, info->alt_addr + (0x06 << 1)); + + for (i = 0; i < 8; i++) { + iowrite8(d1, info->ide_addr + (i << 1)); + iowrite8(d2, info->ide_addr + (i << 1)); + } + + /* Write 16 bit values (data) */ + iowrite16(d1, info->ide_addr); + iowrite16(d1 << 8, info->ide_addr); + + iowrite16(d1, info->ide_addr); + iowrite16(d1 << 8, info->ide_addr); +} + +#endif + +static int __init pata_at32_probe(struct platform_device *pdev) +{ + const struct ata_timing initial_timing = + {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0}; + + struct device *dev = &pdev->dev; + struct at32_ide_info *info; + struct ide_platform_data *board = dev_get_platdata(&pdev->dev); + struct resource *res; + + int irq; + int ret; + + if (!board) + return -ENXIO; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + /* Retrive IRQ */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + /* Setup struct containing private information */ + info = kzalloc(sizeof(struct at32_ide_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->irq = irq; + info->cs = board->cs; + + /* Request memory resources */ + info->res_ide.start = res->start + CF_IDE_OFFSET; + info->res_ide.end = info->res_ide.start + CF_RES_SIZE - 1; + info->res_ide.name = "ide"; + info->res_ide.flags = IORESOURCE_MEM; + + ret = request_resource(res, &info->res_ide); + if (ret) + goto err_req_res_ide; + + info->res_alt.start = res->start + CF_ALT_IDE_OFFSET; + info->res_alt.end = info->res_alt.start + CF_RES_SIZE - 1; + info->res_alt.name = "alt"; + info->res_alt.flags = IORESOURCE_MEM; + + ret = request_resource(res, &info->res_alt); + if (ret) + goto err_req_res_alt; + + /* Setup non-timing elements of SMC */ + info->smc.bus_width = 2; /* 16 bit data bus */ + info->smc.nrd_controlled = 1; /* Sample data on rising edge of NRD */ + info->smc.nwe_controlled = 0; /* Drive data on falling edge of NCS */ + info->smc.nwait_mode = 3; /* NWAIT is in READY mode */ + info->smc.byte_write = 0; /* Byte select access type */ + info->smc.tdf_mode = 0; /* TDF optimization disabled */ + info->smc.tdf_cycles = 0; /* No TDF wait cycles */ + + /* Setup SMC to ATA timing */ + ret = pata_at32_setup_timing(dev, info, &initial_timing); + if (ret) + goto err_setup_timing; + + /* Map ATA address space */ + ret = -ENOMEM; + info->ide_addr = devm_ioremap(dev, info->res_ide.start, 16); + info->alt_addr = devm_ioremap(dev, info->res_alt.start, 16); + if (!info->ide_addr || !info->alt_addr) + goto err_ioremap; + +#ifdef DEBUG_BUS + pata_at32_debug_bus(dev, info); +#endif + + /* Setup and register ATA device */ + ret = pata_at32_init_one(dev, info); + if (ret) + goto err_ata_device; + + return 0; + + err_ata_device: + err_ioremap: + err_setup_timing: + release_resource(&info->res_alt); + err_req_res_alt: + release_resource(&info->res_ide); + err_req_res_ide: + kfree(info); + + return ret; +} + +static int __exit pata_at32_remove(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + struct at32_ide_info *info; + + if (!host) + return 0; + + info = host->private_data; + ata_host_detach(host); + + if (!info) + return 0; + + release_resource(&info->res_ide); + release_resource(&info->res_alt); + + kfree(info); + + return 0; +} + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:at32_ide"); + +static struct platform_driver pata_at32_driver = { + .remove = __exit_p(pata_at32_remove), + .driver = { + .name = "at32_ide", + }, +}; + +module_platform_driver_probe(pata_at32_driver, pata_at32_probe); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("AVR32 SMC/CFC PATA Driver"); +MODULE_AUTHOR("Kristoffer Nyborg Gregertsen "); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c new file mode 100644 index 000000000..9e85937d3 --- /dev/null +++ b/drivers/ata/pata_at91.c @@ -0,0 +1,456 @@ +/* + * PATA driver for AT91SAM9260 Static Memory Controller + * with CompactFlash interface in True IDE mode + * + * Copyright (C) 2009 Matyukevich Sergey + * 2011 Igor Plyatov + * + * Based on: + * * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c + * * pata_at32 driver by Kristoffer Nyborg Gregertsen + * * at91_ide driver by Stanislaw Gruszka + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DRV_NAME "pata_at91" +#define DRV_VERSION "0.3" + +#define CF_IDE_OFFSET 0x00c00000 +#define CF_ALT_IDE_OFFSET 0x00e00000 +#define CF_IDE_RES_SIZE 0x08 +#define CS_PULSE_MAXIMUM 319 +#define ER_SMC_CALC 1 +#define ER_SMC_RECALC 2 + +struct at91_ide_info { + unsigned long mode; + unsigned int cs; + struct clk *mck; + void __iomem *ide_addr; + void __iomem *alt_addr; +}; + +/** + * struct smc_range - range of valid values for SMC register. + */ +struct smc_range { + int min; + int max; +}; + +/** + * adjust_smc_value - adjust value for one of SMC registers. + * @value: adjusted value + * @range: array of SMC ranges with valid values + * @size: SMC ranges array size + * + * This returns the difference between input and output value or negative + * in case of invalid input value. + * If negative returned, then output value = maximal possible from ranges. + */ +static int adjust_smc_value(int *value, struct smc_range *range, int size) +{ + int maximum = (range + size - 1)->max; + int remainder; + + do { + if (*value < range->min) { + remainder = range->min - *value; + *value = range->min; /* nearest valid value */ + return remainder; + } else if ((range->min <= *value) && (*value <= range->max)) + return 0; + + range++; + } while (--size); + *value = maximum; + + return -1; /* invalid value */ +} + +/** + * calc_smc_vals - calculate SMC register values + * @dev: ATA device + * @setup: SMC_SETUP register value + * @pulse: SMC_PULSE register value + * @cycle: SMC_CYCLE register value + * + * This returns negative in case of invalid values for SMC registers: + * -ER_SMC_RECALC - recalculation required for SMC values, + * -ER_SMC_CALC - calculation failed (invalid input values). + * + * SMC use special coding scheme, see "Coding and Range of Timing + * Parameters" table from AT91SAM9 datasheets. + * + * SMC_SETUP = 128*setup[5] + setup[4:0] + * SMC_PULSE = 256*pulse[6] + pulse[5:0] + * SMC_CYCLE = 256*cycle[8:7] + cycle[6:0] + */ +static int calc_smc_vals(struct device *dev, + int *setup, int *pulse, int *cycle, int *cs_pulse) +{ + int ret_val; + int err = 0; + struct smc_range range_setup[] = { /* SMC_SETUP valid values */ + {.min = 0, .max = 31}, /* first range */ + {.min = 128, .max = 159} /* second range */ + }; + struct smc_range range_pulse[] = { /* SMC_PULSE valid values */ + {.min = 0, .max = 63}, /* first range */ + {.min = 256, .max = 319} /* second range */ + }; + struct smc_range range_cycle[] = { /* SMC_CYCLE valid values */ + {.min = 0, .max = 127}, /* first range */ + {.min = 256, .max = 383}, /* second range */ + {.min = 512, .max = 639}, /* third range */ + {.min = 768, .max = 895} /* fourth range */ + }; + + ret_val = adjust_smc_value(setup, range_setup, ARRAY_SIZE(range_setup)); + if (ret_val < 0) + dev_warn(dev, "maximal SMC Setup value\n"); + else + *cycle += ret_val; + + ret_val = adjust_smc_value(pulse, range_pulse, ARRAY_SIZE(range_pulse)); + if (ret_val < 0) + dev_warn(dev, "maximal SMC Pulse value\n"); + else + *cycle += ret_val; + + ret_val = adjust_smc_value(cycle, range_cycle, ARRAY_SIZE(range_cycle)); + if (ret_val < 0) + dev_warn(dev, "maximal SMC Cycle value\n"); + + *cs_pulse = *cycle; + if (*cs_pulse > CS_PULSE_MAXIMUM) { + dev_err(dev, "unable to calculate valid SMC settings\n"); + return -ER_SMC_CALC; + } + + ret_val = adjust_smc_value(cs_pulse, range_pulse, + ARRAY_SIZE(range_pulse)); + if (ret_val < 0) { + dev_warn(dev, "maximal SMC CS Pulse value\n"); + } else if (ret_val != 0) { + *cycle = *cs_pulse; + dev_warn(dev, "SMC Cycle extended\n"); + err = -ER_SMC_RECALC; + } + + return err; +} + +/** + * to_smc_format - convert values into SMC format + * @setup: SETUP value of SMC Setup Register + * @pulse: PULSE value of SMC Pulse Register + * @cycle: CYCLE value of SMC Cycle Register + * @cs_pulse: NCS_PULSE value of SMC Pulse Register + */ +static void to_smc_format(int *setup, int *pulse, int *cycle, int *cs_pulse) +{ + *setup = (*setup & 0x1f) | ((*setup & 0x80) >> 2); + *pulse = (*pulse & 0x3f) | ((*pulse & 0x100) >> 2); + *cycle = (*cycle & 0x7f) | ((*cycle & 0x300) >> 1); + *cs_pulse = (*cs_pulse & 0x3f) | ((*cs_pulse & 0x100) >> 2); +} + +static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz) +{ + unsigned long mul; + + /* + * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] = + * x * (f / 1_000_000_000) = + * x * ((f * 65536) / 1_000_000_000) / 65536 = + * x * (((f / 10_000) * 65536) / 100_000) / 65536 = + */ + + mul = (mck_hz / 10000) << 16; + mul /= 100000; + + return (ns * mul + 65536) >> 16; /* rounding */ +} + +/** + * set_smc_timing - SMC timings setup. + * @dev: device + * @info: AT91 IDE info + * @ata: ATA timings + * + * Its assumed that write timings are same as read timings, + * cs_setup = 0 and cs_pulse = cycle. + */ +static void set_smc_timing(struct device *dev, struct ata_device *adev, + struct at91_ide_info *info, const struct ata_timing *ata) +{ + int ret = 0; + int use_iordy; + struct sam9_smc_config smc; + unsigned int t6z; /* data tristate time in ns */ + unsigned int cycle; /* SMC Cycle width in MCK ticks */ + unsigned int setup; /* SMC Setup width in MCK ticks */ + unsigned int pulse; /* CFIOR and CFIOW pulse width in MCK ticks */ + unsigned int cs_pulse; /* CS4 or CS5 pulse width in MCK ticks*/ + unsigned int tdf_cycles; /* SMC TDF MCK ticks */ + unsigned long mck_hz; /* MCK frequency in Hz */ + + t6z = (ata->mode < XFER_PIO_5) ? 30 : 20; + mck_hz = clk_get_rate(info->mck); + cycle = calc_mck_cycles(ata->cyc8b, mck_hz); + setup = calc_mck_cycles(ata->setup, mck_hz); + pulse = calc_mck_cycles(ata->act8b, mck_hz); + tdf_cycles = calc_mck_cycles(t6z, mck_hz); + + do { + ret = calc_smc_vals(dev, &setup, &pulse, &cycle, &cs_pulse); + } while (ret == -ER_SMC_RECALC); + + if (ret == -ER_SMC_CALC) + dev_err(dev, "Interface may not operate correctly\n"); + + dev_dbg(dev, "SMC Setup=%u, Pulse=%u, Cycle=%u, CS Pulse=%u\n", + setup, pulse, cycle, cs_pulse); + to_smc_format(&setup, &pulse, &cycle, &cs_pulse); + /* disable or enable waiting for IORDY signal */ + use_iordy = ata_pio_need_iordy(adev); + if (use_iordy) + info->mode |= AT91_SMC_EXNWMODE_READY; + + if (tdf_cycles > 15) { + tdf_cycles = 15; + dev_warn(dev, "maximal SMC TDF Cycles value\n"); + } + + dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles); + + /* SMC Setup Register */ + smc.nwe_setup = smc.nrd_setup = setup; + smc.ncs_write_setup = smc.ncs_read_setup = 0; + /* SMC Pulse Register */ + smc.nwe_pulse = smc.nrd_pulse = pulse; + smc.ncs_write_pulse = smc.ncs_read_pulse = cs_pulse; + /* SMC Cycle Register */ + smc.write_cycle = smc.read_cycle = cycle; + /* SMC Mode Register*/ + smc.tdf_cycles = tdf_cycles; + smc.mode = info->mode; + + sam9_smc_configure(0, info->cs, &smc); +} + +static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct at91_ide_info *info = ap->host->private_data; + struct ata_timing timing; + int ret; + + /* Compute ATA timing and set it to SMC */ + ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0); + if (ret) { + dev_warn(ap->dev, "Failed to compute ATA timing %d, " + "set PIO_0 timing\n", ret); + timing = *ata_timing_find_mode(XFER_PIO_0); + } + set_smc_timing(ap->dev, adev, info, &timing); +} + +static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) +{ + struct at91_ide_info *info = dev->link->ap->host->private_data; + unsigned int consumed; + unsigned long flags; + struct sam9_smc_config smc; + + local_irq_save(flags); + sam9_smc_read_mode(0, info->cs, &smc); + + /* set 16bit mode before writing data */ + smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16; + sam9_smc_write_mode(0, info->cs, &smc); + + consumed = ata_sff_data_xfer(dev, buf, buflen, rw); + + /* restore 8bit mode after data is written */ + smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8; + sam9_smc_write_mode(0, info->cs, &smc); + + local_irq_restore(flags); + return consumed; +} + +static struct scsi_host_template pata_at91_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations pata_at91_port_ops = { + .inherits = &ata_sff_port_ops, + + .sff_data_xfer = pata_at91_data_xfer_noirq, + .set_piomode = pata_at91_set_piomode, + .cable_detect = ata_cable_40wire, +}; + +static int pata_at91_probe(struct platform_device *pdev) +{ + struct at91_cf_data *board = dev_get_platdata(&pdev->dev); + struct device *dev = &pdev->dev; + struct at91_ide_info *info; + struct resource *mem_res; + struct ata_host *host; + struct ata_port *ap; + + int irq_flags = 0; + int irq = 0; + int ret; + + /* get platform resources: IO/CTL memories and irq/rst pins */ + + if (pdev->num_resources != 1) { + dev_err(&pdev->dev, "invalid number of resources\n"); + return -EINVAL; + } + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (!mem_res) { + dev_err(dev, "failed to get mem resource\n"); + return -EINVAL; + } + + irq = board->irq_pin; + + /* init ata host */ + + host = ata_host_alloc(dev, 1); + + if (!host) + return -ENOMEM; + + ap = host->ports[0]; + ap->ops = &pata_at91_port_ops; + ap->flags |= ATA_FLAG_SLAVE_POSS; + ap->pio_mask = ATA_PIO4; + + if (!gpio_is_valid(irq)) { + ap->flags |= ATA_FLAG_PIO_POLLING; + ata_port_desc(ap, "no IRQ, using PIO polling"); + } + + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + + if (!info) { + dev_err(dev, "failed to allocate memory for private data\n"); + return -ENOMEM; + } + + info->mck = clk_get(NULL, "mck"); + + if (IS_ERR(info->mck)) { + dev_err(dev, "failed to get access to mck clock\n"); + return -ENODEV; + } + + info->cs = board->chipselect; + info->mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT | + AT91_SMC_DBW_8 | AT91_SMC_TDF_(0); + + info->ide_addr = devm_ioremap(dev, + mem_res->start + CF_IDE_OFFSET, CF_IDE_RES_SIZE); + + if (!info->ide_addr) { + dev_err(dev, "failed to map IO base\n"); + ret = -ENOMEM; + goto err_put; + } + + info->alt_addr = devm_ioremap(dev, + mem_res->start + CF_ALT_IDE_OFFSET, CF_IDE_RES_SIZE); + + if (!info->alt_addr) { + dev_err(dev, "failed to map CTL base\n"); + ret = -ENOMEM; + goto err_put; + } + + ap->ioaddr.cmd_addr = info->ide_addr; + ap->ioaddr.ctl_addr = info->alt_addr + 0x06; + ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; + + ata_sff_std_ports(&ap->ioaddr); + + ata_port_desc(ap, "mmio cmd 0x%llx ctl 0x%llx", + (unsigned long long)mem_res->start + CF_IDE_OFFSET, + (unsigned long long)mem_res->start + CF_ALT_IDE_OFFSET); + + host->private_data = info; + + ret = ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0, + gpio_is_valid(irq) ? ata_sff_interrupt : NULL, + irq_flags, &pata_at91_sht); + if (ret) + goto err_put; + + return 0; + +err_put: + clk_put(info->mck); + return ret; +} + +static int pata_at91_remove(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + struct at91_ide_info *info; + + if (!host) + return 0; + info = host->private_data; + + ata_host_detach(host); + + if (!info) + return 0; + + clk_put(info->mck); + + return 0; +} + +static struct platform_driver pata_at91_driver = { + .probe = pata_at91_probe, + .remove = pata_at91_remove, + .driver = { + .name = DRV_NAME, + }, +}; + +module_platform_driver(pata_at91_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Driver for CF in True IDE mode on AT91SAM9260 SoC"); +MODULE_AUTHOR("Matyukevich Sergey"); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c new file mode 100644 index 000000000..970f7767e --- /dev/null +++ b/drivers/ata/pata_atiixp.c @@ -0,0 +1,313 @@ +/* + * pata_atiixp.c - ATI PATA for new ATA layer + * (C) 2005 Red Hat Inc + * (C) 2009-2010 Bartlomiej Zolnierkiewicz + * + * Based on + * + * linux/drivers/ide/pci/atiixp.c Version 0.01-bart2 Feb. 26, 2004 + * + * Copyright (C) 2003 ATI Inc. + * Copyright (C) 2004 Bartlomiej Zolnierkiewicz + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_atiixp" +#define DRV_VERSION "0.4.6" + +enum { + ATIIXP_IDE_PIO_TIMING = 0x40, + ATIIXP_IDE_MWDMA_TIMING = 0x44, + ATIIXP_IDE_PIO_CONTROL = 0x48, + ATIIXP_IDE_PIO_MODE = 0x4a, + ATIIXP_IDE_UDMA_CONTROL = 0x54, + ATIIXP_IDE_UDMA_MODE = 0x56 +}; + +static const struct dmi_system_id attixp_cable_override_dmi_table[] = { + { + /* Board has onboard PATA<->SATA converters */ + .ident = "MSI E350DM-E33", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "MSI"), + DMI_MATCH(DMI_BOARD_NAME, "E350DM-E33(MS-7720)"), + }, + }, + { } +}; + +static int atiixp_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 udma; + + if (dmi_check_system(attixp_cable_override_dmi_table)) + return ATA_CBL_PATA40_SHORT; + + /* Hack from drivers/ide/pci. Really we want to know how to do the + raw detection not play follow the bios mode guess */ + pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma); + if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40) + return ATA_CBL_PATA80; + return ATA_CBL_PATA40; +} + +static DEFINE_SPINLOCK(atiixp_lock); + +/** + * atiixp_prereset - perform reset handling + * @link: ATA link + * @deadline: deadline jiffies for the operation + * + * Reset sequence checking enable bits to see which ports are + * active. + */ + +static int atiixp_prereset(struct ata_link *link, unsigned long deadline) +{ + static const struct pci_bits atiixp_enable_bits[] = { + { 0x48, 1, 0x01, 0x00 }, + { 0x48, 1, 0x08, 0x00 } + }; + + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no])) + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + +/** + * atiixp_set_pio_timing - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called by both the pio and dma setup functions to set the controller + * timings for PIO transfers. We must load both the mode number and + * timing values into the controller. + */ + +static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio) +{ + static u8 pio_timings[5] = { 0x5D, 0x47, 0x34, 0x22, 0x20 }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = 2 * ap->port_no + adev->devno; + int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1); + u32 pio_timing_data; + u16 pio_mode_data; + + pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data); + pio_mode_data &= ~(0x7 << (4 * dn)); + pio_mode_data |= pio << (4 * dn); + pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data); + + pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data); + pio_timing_data &= ~(0xFF << timing_shift); + pio_timing_data |= (pio_timings[pio] << timing_shift); + pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data); +} + +/** + * atiixp_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. We use a shared helper for this + * as the DMA setup must also adjust the PIO timing information. + */ + +static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned long flags; + spin_lock_irqsave(&atiixp_lock, flags); + atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0); + spin_unlock_irqrestore(&atiixp_lock, flags); +} + +/** + * atiixp_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. We use timing tables for most + * modes but must tune an appropriate PIO mode to match. + */ + +static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static u8 mwdma_timings[5] = { 0x77, 0x21, 0x20 }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dma = adev->dma_mode; + int dn = 2 * ap->port_no + adev->devno; + int wanted_pio; + unsigned long flags; + + spin_lock_irqsave(&atiixp_lock, flags); + + if (adev->dma_mode >= XFER_UDMA_0) { + u16 udma_mode_data; + + dma -= XFER_UDMA_0; + + pci_read_config_word(pdev, ATIIXP_IDE_UDMA_MODE, &udma_mode_data); + udma_mode_data &= ~(0x7 << (4 * dn)); + udma_mode_data |= dma << (4 * dn); + pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data); + } else { + int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1); + u32 mwdma_timing_data; + + dma -= XFER_MW_DMA_0; + + pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING, + &mwdma_timing_data); + mwdma_timing_data &= ~(0xFF << timing_shift); + mwdma_timing_data |= (mwdma_timings[dma] << timing_shift); + pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING, + mwdma_timing_data); + } + /* + * We must now look at the PIO mode situation. We may need to + * adjust the PIO mode to keep the timings acceptable + */ + if (adev->dma_mode >= XFER_MW_DMA_2) + wanted_pio = 4; + else if (adev->dma_mode == XFER_MW_DMA_1) + wanted_pio = 3; + else if (adev->dma_mode == XFER_MW_DMA_0) + wanted_pio = 0; + else BUG(); + + if (adev->pio_mode != wanted_pio) + atiixp_set_pio_timing(ap, adev, wanted_pio); + spin_unlock_irqrestore(&atiixp_lock, flags); +} + +/** + * atiixp_bmdma_start - DMA start callback + * @qc: Command in progress + * + * When DMA begins we need to ensure that the UDMA control + * register for the channel is correctly set. + * + * Note: The host lock held by the libata layer protects + * us from two channels both trying to set DMA bits at once + */ + +static void atiixp_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = (2 * ap->port_no) + adev->devno; + u16 tmp16; + + pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); + if (ata_using_udma(adev)) + tmp16 |= (1 << dn); + else + tmp16 &= ~(1 << dn); + pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16); + ata_bmdma_start(qc); +} + +/** + * atiixp_dma_stop - DMA stop callback + * @qc: Command in progress + * + * DMA has completed. Clear the UDMA flag as the next operations will + * be PIO ones not UDMA data transfer. + * + * Note: The host lock held by the libata layer protects + * us from two channels both trying to set DMA bits at once + */ + +static void atiixp_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = (2 * ap->port_no) + qc->dev->devno; + u16 tmp16; + + pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); + tmp16 &= ~(1 << dn); + pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16); + ata_bmdma_stop(qc); +} + +static struct scsi_host_template atiixp_sht = { + ATA_BMDMA_SHT(DRV_NAME), + .sg_tablesize = LIBATA_DUMB_MAX_PRD, +}; + +static struct ata_port_operations atiixp_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .qc_prep = ata_bmdma_dumb_qc_prep, + .bmdma_start = atiixp_bmdma_start, + .bmdma_stop = atiixp_bmdma_stop, + + .prereset = atiixp_prereset, + .cable_detect = atiixp_cable_detect, + .set_piomode = atiixp_set_piomode, + .set_dmamode = atiixp_set_dmamode, +}; + +static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .udma_mask = ATA_UDMA5, + .port_ops = &atiixp_port_ops + }; + const struct ata_port_info *ppi[] = { &info, &info }; + + return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL, + ATA_HOST_PARALLEL_SCAN); +} + +static const struct pci_device_id atiixp[] = { + { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), }, + { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), }, + { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), }, + { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), }, + { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), }, + + { }, +}; + +static struct pci_driver atiixp_pci_driver = { + .name = DRV_NAME, + .id_table = atiixp, + .probe = atiixp_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .resume = ata_pci_device_resume, + .suspend = ata_pci_device_suspend, +#endif +}; + +module_pci_driver(atiixp_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, atiixp); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c new file mode 100644 index 000000000..3ea50dc5e --- /dev/null +++ b/drivers/ata/pata_atp867x.c @@ -0,0 +1,573 @@ +/* + * pata_atp867x.c - ARTOP 867X 64bit 4-channel UDMA133 ATA controller driver + * + * (C) 2009 Google Inc. John(Jung-Ik) Lee + * + * Per Atp867 data sheet rev 1.2, Acard. + * Based in part on early ide code from + * 2003-2004 by Eric Uhrhane, Google, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * TODO: + * 1. RAID features [comparison, XOR, striping, mirroring, etc.] + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_atp867x" +#define DRV_VERSION "0.7.5" + +/* + * IO Registers + * Note that all runtime hot priv ports are cached in ap private_data + */ + +enum { + ATP867X_IO_CHANNEL_OFFSET = 0x10, + + /* + * IO Register Bitfields + */ + + ATP867X_IO_PIOSPD_ACTIVE_SHIFT = 4, + ATP867X_IO_PIOSPD_RECOVER_SHIFT = 0, + + ATP867X_IO_DMAMODE_MSTR_SHIFT = 0, + ATP867X_IO_DMAMODE_MSTR_MASK = 0x07, + ATP867X_IO_DMAMODE_SLAVE_SHIFT = 4, + ATP867X_IO_DMAMODE_SLAVE_MASK = 0x70, + + ATP867X_IO_DMAMODE_UDMA_6 = 0x07, + ATP867X_IO_DMAMODE_UDMA_5 = 0x06, + ATP867X_IO_DMAMODE_UDMA_4 = 0x05, + ATP867X_IO_DMAMODE_UDMA_3 = 0x04, + ATP867X_IO_DMAMODE_UDMA_2 = 0x03, + ATP867X_IO_DMAMODE_UDMA_1 = 0x02, + ATP867X_IO_DMAMODE_UDMA_0 = 0x01, + ATP867X_IO_DMAMODE_DISABLE = 0x00, + + ATP867X_IO_SYS_INFO_66MHZ = 0x04, + ATP867X_IO_SYS_INFO_SLOW_UDMA5 = 0x02, + ATP867X_IO_SYS_MASK_RESERVED = (~0xf1), + + ATP867X_IO_PORTSPD_VAL = 0x1143, + ATP867X_PREREAD_VAL = 0x0200, + + ATP867X_NUM_PORTS = 4, + ATP867X_BAR_IOBASE = 0, + ATP867X_BAR_ROMBASE = 6, +}; + +#define ATP867X_IOBASE(ap) ((ap)->host->iomap[0]) +#define ATP867X_SYS_INFO(ap) (0x3F + ATP867X_IOBASE(ap)) + +#define ATP867X_IO_PORTBASE(ap, port) (0x00 + ATP867X_IOBASE(ap) + \ + (port) * ATP867X_IO_CHANNEL_OFFSET) +#define ATP867X_IO_DMABASE(ap, port) (0x40 + \ + ATP867X_IO_PORTBASE((ap), (port))) + +#define ATP867X_IO_STATUS(ap, port) (0x07 + \ + ATP867X_IO_PORTBASE((ap), (port))) +#define ATP867X_IO_ALTSTATUS(ap, port) (0x0E + \ + ATP867X_IO_PORTBASE((ap), (port))) + +/* + * hot priv ports + */ +#define ATP867X_IO_MSTRPIOSPD(ap, port) (0x08 + \ + ATP867X_IO_DMABASE((ap), (port))) +#define ATP867X_IO_SLAVPIOSPD(ap, port) (0x09 + \ + ATP867X_IO_DMABASE((ap), (port))) +#define ATP867X_IO_8BPIOSPD(ap, port) (0x0A + \ + ATP867X_IO_DMABASE((ap), (port))) +#define ATP867X_IO_DMAMODE(ap, port) (0x0B + \ + ATP867X_IO_DMABASE((ap), (port))) + +#define ATP867X_IO_PORTSPD(ap, port) (0x4A + \ + ATP867X_IO_PORTBASE((ap), (port))) +#define ATP867X_IO_PREREAD(ap, port) (0x4C + \ + ATP867X_IO_PORTBASE((ap), (port))) + +struct atp867x_priv { + void __iomem *dma_mode; + void __iomem *mstr_piospd; + void __iomem *slave_piospd; + void __iomem *eightb_piospd; + int pci66mhz; +}; + +static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct atp867x_priv *dp = ap->private_data; + u8 speed = adev->dma_mode; + u8 b; + u8 mode = speed - XFER_UDMA_0 + 1; + + /* + * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed + * on 66MHz bus + * rev-A: UDMA_1~4 (5, 6 no change) + * rev-B: all UDMA modes + * UDMA_0 stays not to disable UDMA + */ + if (dp->pci66mhz && mode > ATP867X_IO_DMAMODE_UDMA_0 && + (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B || + mode < ATP867X_IO_DMAMODE_UDMA_5)) + mode--; + + b = ioread8(dp->dma_mode); + if (adev->devno & 1) { + b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK) | + (mode << ATP867X_IO_DMAMODE_SLAVE_SHIFT); + } else { + b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK) | + (mode << ATP867X_IO_DMAMODE_MSTR_SHIFT); + } + iowrite8(b, dp->dma_mode); +} + +static int atp867x_get_active_clocks_shifted(struct ata_port *ap, + unsigned int clk) +{ + struct atp867x_priv *dp = ap->private_data; + unsigned char clocks = clk; + + /* + * Doc 6.6.9: increase the clock value by 1 for safer PIO speed + * on 66MHz bus + */ + if (dp->pci66mhz) + clocks++; + + switch (clocks) { + case 0: + clocks = 1; + break; + case 1 ... 6: + break; + default: + printk(KERN_WARNING "ATP867X: active %dclk is invalid. " + "Using 12clk.\n", clk); + case 9 ... 12: + clocks = 7; /* 12 clk */ + break; + case 7: + case 8: /* default 8 clk */ + clocks = 0; + goto active_clock_shift_done; + } + +active_clock_shift_done: + return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT; +} + +static int atp867x_get_recover_clocks_shifted(unsigned int clk) +{ + unsigned char clocks = clk; + + switch (clocks) { + case 0: + clocks = 1; + break; + case 1 ... 11: + break; + case 13: + case 14: + --clocks; /* by the spec */ + break; + case 15: + break; + default: + printk(KERN_WARNING "ATP867X: recover %dclk is invalid. " + "Using default 12clk.\n", clk); + case 12: /* default 12 clk */ + clocks = 0; + break; + } + + return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT; +} + +static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_device *peer = ata_dev_pair(adev); + struct atp867x_priv *dp = ap->private_data; + u8 speed = adev->pio_mode; + struct ata_timing t, p; + int T, UT; + u8 b; + + T = 1000000000 / 33333; + UT = T / 4; + + ata_timing_compute(adev, speed, &t, T, UT); + if (peer && peer->pio_mode) { + ata_timing_compute(peer, peer->pio_mode, &p, T, UT); + ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT); + } + + b = ioread8(dp->dma_mode); + if (adev->devno & 1) + b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK); + else + b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK); + iowrite8(b, dp->dma_mode); + + b = atp867x_get_active_clocks_shifted(ap, t.active) | + atp867x_get_recover_clocks_shifted(t.recover); + + if (adev->devno & 1) + iowrite8(b, dp->slave_piospd); + else + iowrite8(b, dp->mstr_piospd); + + b = atp867x_get_active_clocks_shifted(ap, t.act8b) | + atp867x_get_recover_clocks_shifted(t.rec8b); + + iowrite8(b, dp->eightb_piospd); +} + +static int atp867x_cable_override(struct pci_dev *pdev) +{ + if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP && + (pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A || + pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) { + return 1; + } + return 0; +} + +static int atp867x_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (atp867x_cable_override(pdev)) + return ATA_CBL_PATA40_SHORT; + + return ATA_CBL_PATA_UNK; +} + +static struct scsi_host_template atp867x_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations atp867x_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = atp867x_cable_detect, + .set_piomode = atp867x_set_piomode, + .set_dmamode = atp867x_set_dmamode, +}; + + +#ifdef ATP867X_DEBUG +static void atp867x_check_res(struct pci_dev *pdev) +{ + int i; + unsigned long start, len; + + /* Check the PCI resources for this channel are enabled */ + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + start = pci_resource_start(pdev, i); + len = pci_resource_len(pdev, i); + printk(KERN_DEBUG "ATP867X: resource start:len=%lx:%lx\n", + start, len); + } +} + +static void atp867x_check_ports(struct ata_port *ap, int port) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + struct atp867x_priv *dp = ap->private_data; + + printk(KERN_DEBUG "ATP867X: port[%d] addresses\n" + " cmd_addr =0x%llx, 0x%llx\n" + " ctl_addr =0x%llx, 0x%llx\n" + " bmdma_addr =0x%llx, 0x%llx\n" + " data_addr =0x%llx\n" + " error_addr =0x%llx\n" + " feature_addr =0x%llx\n" + " nsect_addr =0x%llx\n" + " lbal_addr =0x%llx\n" + " lbam_addr =0x%llx\n" + " lbah_addr =0x%llx\n" + " device_addr =0x%llx\n" + " status_addr =0x%llx\n" + " command_addr =0x%llx\n" + " dp->dma_mode =0x%llx\n" + " dp->mstr_piospd =0x%llx\n" + " dp->slave_piospd =0x%llx\n" + " dp->eightb_piospd =0x%llx\n" + " dp->pci66mhz =0x%lx\n", + port, + (unsigned long long)ioaddr->cmd_addr, + (unsigned long long)ATP867X_IO_PORTBASE(ap, port), + (unsigned long long)ioaddr->ctl_addr, + (unsigned long long)ATP867X_IO_ALTSTATUS(ap, port), + (unsigned long long)ioaddr->bmdma_addr, + (unsigned long long)ATP867X_IO_DMABASE(ap, port), + (unsigned long long)ioaddr->data_addr, + (unsigned long long)ioaddr->error_addr, + (unsigned long long)ioaddr->feature_addr, + (unsigned long long)ioaddr->nsect_addr, + (unsigned long long)ioaddr->lbal_addr, + (unsigned long long)ioaddr->lbam_addr, + (unsigned long long)ioaddr->lbah_addr, + (unsigned long long)ioaddr->device_addr, + (unsigned long long)ioaddr->status_addr, + (unsigned long long)ioaddr->command_addr, + (unsigned long long)dp->dma_mode, + (unsigned long long)dp->mstr_piospd, + (unsigned long long)dp->slave_piospd, + (unsigned long long)dp->eightb_piospd, + (unsigned long)dp->pci66mhz); +} +#endif + +static int atp867x_set_priv(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct atp867x_priv *dp; + int port = ap->port_no; + + dp = ap->private_data = + devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL); + if (dp == NULL) + return -ENOMEM; + + dp->dma_mode = ATP867X_IO_DMAMODE(ap, port); + dp->mstr_piospd = ATP867X_IO_MSTRPIOSPD(ap, port); + dp->slave_piospd = ATP867X_IO_SLAVPIOSPD(ap, port); + dp->eightb_piospd = ATP867X_IO_8BPIOSPD(ap, port); + + dp->pci66mhz = + ioread8(ATP867X_SYS_INFO(ap)) & ATP867X_IO_SYS_INFO_66MHZ; + + return 0; +} + +static void atp867x_fixup(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + struct ata_port *ap = host->ports[0]; + int i; + u8 v; + + /* + * Broken BIOS might not set latency high enough + */ + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &v); + if (v < 0x80) { + v = 0x80; + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, v); + printk(KERN_DEBUG "ATP867X: set latency timer of device %s" + " to %d\n", pci_name(pdev), v); + } + + /* + * init 8bit io ports speed(0aaarrrr) to 43h and + * init udma modes of master/slave to 0/0(11h) + */ + for (i = 0; i < ATP867X_NUM_PORTS; i++) + iowrite16(ATP867X_IO_PORTSPD_VAL, ATP867X_IO_PORTSPD(ap, i)); + + /* + * init PreREAD counts + */ + for (i = 0; i < ATP867X_NUM_PORTS; i++) + iowrite16(ATP867X_PREREAD_VAL, ATP867X_IO_PREREAD(ap, i)); + + v = ioread8(ATP867X_IOBASE(ap) + 0x28); + v &= 0xcf; /* Enable INTA#: bit4=0 means enable */ + v |= 0xc0; /* Enable PCI burst, MRM & not immediate interrupts */ + iowrite8(v, ATP867X_IOBASE(ap) + 0x28); + + /* + * Turn off the over clocked udma5 mode, only for Rev-B + */ + v = ioread8(ATP867X_SYS_INFO(ap)); + v &= ATP867X_IO_SYS_MASK_RESERVED; + if (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B) + v |= ATP867X_IO_SYS_INFO_SLOW_UDMA5; + iowrite8(v, ATP867X_SYS_INFO(ap)); +} + +static int atp867x_ata_pci_sff_init_host(struct ata_host *host) +{ + struct device *gdev = host->dev; + struct pci_dev *pdev = to_pci_dev(gdev); + unsigned int mask = 0; + int i, rc; + + /* + * do not map rombase + */ + rc = pcim_iomap_regions(pdev, 1 << ATP867X_BAR_IOBASE, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + host->iomap = pcim_iomap_table(pdev); + +#ifdef ATP867X_DEBUG + atp867x_check_res(pdev); + + for (i = 0; i < PCI_ROM_RESOURCE; i++) + printk(KERN_DEBUG "ATP867X: iomap[%d]=0x%llx\n", i, + (unsigned long long)(host->iomap[i])); +#endif + + /* + * request, iomap BARs and init port addresses accordingly + */ + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + struct ata_ioports *ioaddr = &ap->ioaddr; + + ioaddr->cmd_addr = ATP867X_IO_PORTBASE(ap, i); + ioaddr->ctl_addr = ioaddr->altstatus_addr + = ATP867X_IO_ALTSTATUS(ap, i); + ioaddr->bmdma_addr = ATP867X_IO_DMABASE(ap, i); + + ata_sff_std_ports(ioaddr); + rc = atp867x_set_priv(ap); + if (rc) + return rc; + +#ifdef ATP867X_DEBUG + atp867x_check_ports(ap, i); +#endif + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", + (unsigned long)ioaddr->cmd_addr, + (unsigned long)ioaddr->ctl_addr); + ata_port_desc(ap, "bmdma 0x%lx", + (unsigned long)ioaddr->bmdma_addr); + + mask |= 1 << i; + } + + if (!mask) { + dev_err(gdev, "no available native port\n"); + return -ENODEV; + } + + atp867x_fixup(host); + + rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + + rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); + return rc; +} + +static int atp867x_init_one(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + static const struct ata_port_info info_867x = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &atp867x_ops, + }; + + struct ata_host *host; + const struct ata_port_info *ppi[] = { &info_867x, NULL }; + int rc; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + printk(KERN_INFO "ATP867X: ATP867 ATA UDMA133 controller (rev %02X)", + pdev->device); + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, ATP867X_NUM_PORTS); + if (!host) { + dev_err(&pdev->dev, "failed to allocate ATA host\n"); + rc = -ENOMEM; + goto err_out; + } + + rc = atp867x_ata_pci_sff_init_host(host); + if (rc) { + dev_err(&pdev->dev, "failed to init host\n"); + goto err_out; + } + + pci_set_master(pdev); + + rc = ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, + IRQF_SHARED, &atp867x_sht); + if (rc) + dev_err(&pdev->dev, "failed to activate host\n"); + +err_out: + return rc; +} + +#ifdef CONFIG_PM_SLEEP +static int atp867x_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + atp867x_fixup(host); + + ata_host_resume(host); + return 0; +} +#endif + +static struct pci_device_id atp867x_pci_tbl[] = { + { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867A), 0 }, + { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867B), 0 }, + { }, +}; + +static struct pci_driver atp867x_driver = { + .name = DRV_NAME, + .id_table = atp867x_pci_tbl, + .probe = atp867x_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = atp867x_reinit_one, +#endif +}; + +module_pci_driver(atp867x_driver); + +MODULE_AUTHOR("John(Jung-Ik) Lee, Google Inc."); +MODULE_DESCRIPTION("low level driver for Artop/Acard 867x ATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, atp867x_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c new file mode 100644 index 000000000..dd7410019 --- /dev/null +++ b/drivers/ata/pata_bf54x.c @@ -0,0 +1,1704 @@ +/* + * File: drivers/ata/pata_bf54x.c + * Author: Sonic Zhang + * + * Created: + * Description: PATA Driver for blackfin 54x + * + * Modified: + * Copyright 2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata-bf54x" +#define DRV_VERSION "0.9" + +#define ATA_REG_CTRL 0x0E +#define ATA_REG_ALTSTATUS ATA_REG_CTRL + +/* These are the offset of the controller's registers */ +#define ATAPI_OFFSET_CONTROL 0x00 +#define ATAPI_OFFSET_STATUS 0x04 +#define ATAPI_OFFSET_DEV_ADDR 0x08 +#define ATAPI_OFFSET_DEV_TXBUF 0x0c +#define ATAPI_OFFSET_DEV_RXBUF 0x10 +#define ATAPI_OFFSET_INT_MASK 0x14 +#define ATAPI_OFFSET_INT_STATUS 0x18 +#define ATAPI_OFFSET_XFER_LEN 0x1c +#define ATAPI_OFFSET_LINE_STATUS 0x20 +#define ATAPI_OFFSET_SM_STATE 0x24 +#define ATAPI_OFFSET_TERMINATE 0x28 +#define ATAPI_OFFSET_PIO_TFRCNT 0x2c +#define ATAPI_OFFSET_DMA_TFRCNT 0x30 +#define ATAPI_OFFSET_UMAIN_TFRCNT 0x34 +#define ATAPI_OFFSET_UDMAOUT_TFRCNT 0x38 +#define ATAPI_OFFSET_REG_TIM_0 0x40 +#define ATAPI_OFFSET_PIO_TIM_0 0x44 +#define ATAPI_OFFSET_PIO_TIM_1 0x48 +#define ATAPI_OFFSET_MULTI_TIM_0 0x50 +#define ATAPI_OFFSET_MULTI_TIM_1 0x54 +#define ATAPI_OFFSET_MULTI_TIM_2 0x58 +#define ATAPI_OFFSET_ULTRA_TIM_0 0x60 +#define ATAPI_OFFSET_ULTRA_TIM_1 0x64 +#define ATAPI_OFFSET_ULTRA_TIM_2 0x68 +#define ATAPI_OFFSET_ULTRA_TIM_3 0x6c + + +#define ATAPI_GET_CONTROL(base)\ + bfin_read16(base + ATAPI_OFFSET_CONTROL) +#define ATAPI_SET_CONTROL(base, val)\ + bfin_write16(base + ATAPI_OFFSET_CONTROL, val) +#define ATAPI_GET_STATUS(base)\ + bfin_read16(base + ATAPI_OFFSET_STATUS) +#define ATAPI_GET_DEV_ADDR(base)\ + bfin_read16(base + ATAPI_OFFSET_DEV_ADDR) +#define ATAPI_SET_DEV_ADDR(base, val)\ + bfin_write16(base + ATAPI_OFFSET_DEV_ADDR, val) +#define ATAPI_GET_DEV_TXBUF(base)\ + bfin_read16(base + ATAPI_OFFSET_DEV_TXBUF) +#define ATAPI_SET_DEV_TXBUF(base, val)\ + bfin_write16(base + ATAPI_OFFSET_DEV_TXBUF, val) +#define ATAPI_GET_DEV_RXBUF(base)\ + bfin_read16(base + ATAPI_OFFSET_DEV_RXBUF) +#define ATAPI_SET_DEV_RXBUF(base, val)\ + bfin_write16(base + ATAPI_OFFSET_DEV_RXBUF, val) +#define ATAPI_GET_INT_MASK(base)\ + bfin_read16(base + ATAPI_OFFSET_INT_MASK) +#define ATAPI_SET_INT_MASK(base, val)\ + bfin_write16(base + ATAPI_OFFSET_INT_MASK, val) +#define ATAPI_GET_INT_STATUS(base)\ + bfin_read16(base + ATAPI_OFFSET_INT_STATUS) +#define ATAPI_SET_INT_STATUS(base, val)\ + bfin_write16(base + ATAPI_OFFSET_INT_STATUS, val) +#define ATAPI_GET_XFER_LEN(base)\ + bfin_read16(base + ATAPI_OFFSET_XFER_LEN) +#define ATAPI_SET_XFER_LEN(base, val)\ + bfin_write16(base + ATAPI_OFFSET_XFER_LEN, val) +#define ATAPI_GET_LINE_STATUS(base)\ + bfin_read16(base + ATAPI_OFFSET_LINE_STATUS) +#define ATAPI_GET_SM_STATE(base)\ + bfin_read16(base + ATAPI_OFFSET_SM_STATE) +#define ATAPI_GET_TERMINATE(base)\ + bfin_read16(base + ATAPI_OFFSET_TERMINATE) +#define ATAPI_SET_TERMINATE(base, val)\ + bfin_write16(base + ATAPI_OFFSET_TERMINATE, val) +#define ATAPI_GET_PIO_TFRCNT(base)\ + bfin_read16(base + ATAPI_OFFSET_PIO_TFRCNT) +#define ATAPI_GET_DMA_TFRCNT(base)\ + bfin_read16(base + ATAPI_OFFSET_DMA_TFRCNT) +#define ATAPI_GET_UMAIN_TFRCNT(base)\ + bfin_read16(base + ATAPI_OFFSET_UMAIN_TFRCNT) +#define ATAPI_GET_UDMAOUT_TFRCNT(base)\ + bfin_read16(base + ATAPI_OFFSET_UDMAOUT_TFRCNT) +#define ATAPI_GET_REG_TIM_0(base)\ + bfin_read16(base + ATAPI_OFFSET_REG_TIM_0) +#define ATAPI_SET_REG_TIM_0(base, val)\ + bfin_write16(base + ATAPI_OFFSET_REG_TIM_0, val) +#define ATAPI_GET_PIO_TIM_0(base)\ + bfin_read16(base + ATAPI_OFFSET_PIO_TIM_0) +#define ATAPI_SET_PIO_TIM_0(base, val)\ + bfin_write16(base + ATAPI_OFFSET_PIO_TIM_0, val) +#define ATAPI_GET_PIO_TIM_1(base)\ + bfin_read16(base + ATAPI_OFFSET_PIO_TIM_1) +#define ATAPI_SET_PIO_TIM_1(base, val)\ + bfin_write16(base + ATAPI_OFFSET_PIO_TIM_1, val) +#define ATAPI_GET_MULTI_TIM_0(base)\ + bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_0) +#define ATAPI_SET_MULTI_TIM_0(base, val)\ + bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_0, val) +#define ATAPI_GET_MULTI_TIM_1(base)\ + bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_1) +#define ATAPI_SET_MULTI_TIM_1(base, val)\ + bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_1, val) +#define ATAPI_GET_MULTI_TIM_2(base)\ + bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_2) +#define ATAPI_SET_MULTI_TIM_2(base, val)\ + bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_2, val) +#define ATAPI_GET_ULTRA_TIM_0(base)\ + bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_0) +#define ATAPI_SET_ULTRA_TIM_0(base, val)\ + bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_0, val) +#define ATAPI_GET_ULTRA_TIM_1(base)\ + bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_1) +#define ATAPI_SET_ULTRA_TIM_1(base, val)\ + bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_1, val) +#define ATAPI_GET_ULTRA_TIM_2(base)\ + bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_2) +#define ATAPI_SET_ULTRA_TIM_2(base, val)\ + bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_2, val) +#define ATAPI_GET_ULTRA_TIM_3(base)\ + bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_3) +#define ATAPI_SET_ULTRA_TIM_3(base, val)\ + bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_3, val) + +/** + * PIO Mode - Frequency compatibility + */ +/* mode: 0 1 2 3 4 */ +static const u32 pio_fsclk[] = +{ 33333333, 33333333, 33333333, 33333333, 33333333 }; + +/** + * MDMA Mode - Frequency compatibility + */ +/* mode: 0 1 2 */ +static const u32 mdma_fsclk[] = { 33333333, 33333333, 33333333 }; + +/** + * UDMA Mode - Frequency compatibility + * + * UDMA5 - 100 MB/s - SCLK = 133 MHz + * UDMA4 - 66 MB/s - SCLK >= 80 MHz + * UDMA3 - 44.4 MB/s - SCLK >= 50 MHz + * UDMA2 - 33 MB/s - SCLK >= 40 MHz + */ +/* mode: 0 1 2 3 4 5 */ +static const u32 udma_fsclk[] = +{ 33333333, 33333333, 40000000, 50000000, 80000000, 133333333 }; + +/** + * Register transfer timing table + */ +/* mode: 0 1 2 3 4 */ +/* Cycle Time */ +static const u32 reg_t0min[] = { 600, 383, 330, 180, 120 }; +/* DIOR/DIOW to end cycle */ +static const u32 reg_t2min[] = { 290, 290, 290, 70, 25 }; +/* DIOR/DIOW asserted pulse width */ +static const u32 reg_teocmin[] = { 290, 290, 290, 80, 70 }; + +/** + * PIO timing table + */ +/* mode: 0 1 2 3 4 */ +/* Cycle Time */ +static const u32 pio_t0min[] = { 600, 383, 240, 180, 120 }; +/* Address valid to DIOR/DIORW */ +static const u32 pio_t1min[] = { 70, 50, 30, 30, 25 }; +/* DIOR/DIOW to end cycle */ +static const u32 pio_t2min[] = { 165, 125, 100, 80, 70 }; +/* DIOR/DIOW asserted pulse width */ +static const u32 pio_teocmin[] = { 165, 125, 100, 70, 25 }; +/* DIOW data hold */ +static const u32 pio_t4min[] = { 30, 20, 15, 10, 10 }; + +/* ****************************************************************** + * Multiword DMA timing table + * ****************************************************************** + */ +/* mode: 0 1 2 */ +/* Cycle Time */ +static const u32 mdma_t0min[] = { 480, 150, 120 }; +/* DIOR/DIOW asserted pulse width */ +static const u32 mdma_tdmin[] = { 215, 80, 70 }; +/* DMACK to read data released */ +static const u32 mdma_thmin[] = { 20, 15, 10 }; +/* DIOR/DIOW to DMACK hold */ +static const u32 mdma_tjmin[] = { 20, 5, 5 }; +/* DIOR negated pulse width */ +static const u32 mdma_tkrmin[] = { 50, 50, 25 }; +/* DIOR negated pulse width */ +static const u32 mdma_tkwmin[] = { 215, 50, 25 }; +/* CS[1:0] valid to DIOR/DIOW */ +static const u32 mdma_tmmin[] = { 50, 30, 25 }; +/* DMACK to read data released */ +static const u32 mdma_tzmax[] = { 20, 25, 25 }; + +/** + * Ultra DMA timing table + */ +/* mode: 0 1 2 3 4 5 */ +static const u32 udma_tcycmin[] = { 112, 73, 54, 39, 25, 17 }; +static const u32 udma_tdvsmin[] = { 70, 48, 31, 20, 7, 5 }; +static const u32 udma_tenvmax[] = { 70, 70, 70, 55, 55, 50 }; +static const u32 udma_trpmin[] = { 160, 125, 100, 100, 100, 85 }; +static const u32 udma_tmin[] = { 5, 5, 5, 5, 3, 3 }; + + +static const u32 udma_tmlimin = 20; +static const u32 udma_tzahmin = 20; +static const u32 udma_tenvmin = 20; +static const u32 udma_tackmin = 20; +static const u32 udma_tssmin = 50; + +#define BFIN_MAX_SG_SEGMENTS 4 + +/** + * + * Function: num_clocks_min + * + * Description: + * calculate number of SCLK cycles to meet minimum timing + */ +static unsigned short num_clocks_min(unsigned long tmin, + unsigned long fsclk) +{ + unsigned long tmp ; + unsigned short result; + + tmp = tmin * (fsclk/1000/1000) / 1000; + result = (unsigned short)tmp; + if ((tmp*1000*1000) < (tmin*(fsclk/1000))) { + result++; + } + + return result; +} + +/** + * bfin_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set PIO mode for device. + * + * LOCKING: + * None (inherited from caller). + */ + +static void bfin_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + int mode = adev->pio_mode - XFER_PIO_0; + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + unsigned int fsclk = get_sclk(); + unsigned short teoc_reg, t2_reg, teoc_pio; + unsigned short t4_reg, t2_pio, t1_reg; + unsigned short n0, n6, t6min = 5; + + /* the most restrictive timing value is t6 and tc, the DIOW - data hold + * If one SCLK pulse is longer than this minimum value then register + * transfers cannot be supported at this frequency. + */ + n6 = num_clocks_min(t6min, fsclk); + if (mode >= 0 && mode <= 4 && n6 >= 1) { + dev_dbg(adev->link->ap->dev, "set piomode: mode=%d, fsclk=%ud\n", mode, fsclk); + /* calculate the timing values for register transfers. */ + while (mode > 0 && pio_fsclk[mode] > fsclk) + mode--; + + /* DIOR/DIOW to end cycle time */ + t2_reg = num_clocks_min(reg_t2min[mode], fsclk); + /* DIOR/DIOW asserted pulse width */ + teoc_reg = num_clocks_min(reg_teocmin[mode], fsclk); + /* Cycle Time */ + n0 = num_clocks_min(reg_t0min[mode], fsclk); + + /* increase t2 until we meed the minimum cycle length */ + if (t2_reg + teoc_reg < n0) + t2_reg = n0 - teoc_reg; + + /* calculate the timing values for pio transfers. */ + + /* DIOR/DIOW to end cycle time */ + t2_pio = num_clocks_min(pio_t2min[mode], fsclk); + /* DIOR/DIOW asserted pulse width */ + teoc_pio = num_clocks_min(pio_teocmin[mode], fsclk); + /* Cycle Time */ + n0 = num_clocks_min(pio_t0min[mode], fsclk); + + /* increase t2 until we meed the minimum cycle length */ + if (t2_pio + teoc_pio < n0) + t2_pio = n0 - teoc_pio; + + /* Address valid to DIOR/DIORW */ + t1_reg = num_clocks_min(pio_t1min[mode], fsclk); + + /* DIOW data hold */ + t4_reg = num_clocks_min(pio_t4min[mode], fsclk); + + ATAPI_SET_REG_TIM_0(base, (teoc_reg<<8 | t2_reg)); + ATAPI_SET_PIO_TIM_0(base, (t4_reg<<12 | t2_pio<<4 | t1_reg)); + ATAPI_SET_PIO_TIM_1(base, teoc_pio); + if (mode > 2) { + ATAPI_SET_CONTROL(base, + ATAPI_GET_CONTROL(base) | IORDY_EN); + } else { + ATAPI_SET_CONTROL(base, + ATAPI_GET_CONTROL(base) & ~IORDY_EN); + } + + /* Disable host ATAPI PIO interrupts */ + ATAPI_SET_INT_MASK(base, ATAPI_GET_INT_MASK(base) + & ~(PIO_DONE_MASK | HOST_TERM_XFER_MASK)); + SSYNC(); + } +} + +/** + * bfin_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set UDMA mode for device. + * + * LOCKING: + * None (inherited from caller). + */ + +static void bfin_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + int mode; + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + unsigned long fsclk = get_sclk(); + unsigned short tenv, tack, tcyc_tdvs, tdvs, tmli, tss, trp, tzah; + unsigned short tm, td, tkr, tkw, teoc, th; + unsigned short n0, nf, tfmin = 5; + unsigned short nmin, tcyc; + + mode = adev->dma_mode - XFER_UDMA_0; + if (mode >= 0 && mode <= 5) { + dev_dbg(adev->link->ap->dev, "set udmamode: mode=%d\n", mode); + /* the most restrictive timing value is t6 and tc, + * the DIOW - data hold. If one SCLK pulse is longer + * than this minimum value then register + * transfers cannot be supported at this frequency. + */ + while (mode > 0 && udma_fsclk[mode] > fsclk) + mode--; + + nmin = num_clocks_min(udma_tmin[mode], fsclk); + if (nmin >= 1) { + /* calculate the timing values for Ultra DMA. */ + tdvs = num_clocks_min(udma_tdvsmin[mode], fsclk); + tcyc = num_clocks_min(udma_tcycmin[mode], fsclk); + tcyc_tdvs = 2; + + /* increase tcyc - tdvs (tcyc_tdvs) until we meed + * the minimum cycle length + */ + if (tdvs + tcyc_tdvs < tcyc) + tcyc_tdvs = tcyc - tdvs; + + /* Mow assign the values required for the timing + * registers + */ + if (tcyc_tdvs < 2) + tcyc_tdvs = 2; + + if (tdvs < 2) + tdvs = 2; + + tack = num_clocks_min(udma_tackmin, fsclk); + tss = num_clocks_min(udma_tssmin, fsclk); + tmli = num_clocks_min(udma_tmlimin, fsclk); + tzah = num_clocks_min(udma_tzahmin, fsclk); + trp = num_clocks_min(udma_trpmin[mode], fsclk); + tenv = num_clocks_min(udma_tenvmin, fsclk); + if (tenv <= udma_tenvmax[mode]) { + ATAPI_SET_ULTRA_TIM_0(base, (tenv<<8 | tack)); + ATAPI_SET_ULTRA_TIM_1(base, + (tcyc_tdvs<<8 | tdvs)); + ATAPI_SET_ULTRA_TIM_2(base, (tmli<<8 | tss)); + ATAPI_SET_ULTRA_TIM_3(base, (trp<<8 | tzah)); + } + } + } + + mode = adev->dma_mode - XFER_MW_DMA_0; + if (mode >= 0 && mode <= 2) { + dev_dbg(adev->link->ap->dev, "set mdmamode: mode=%d\n", mode); + /* the most restrictive timing value is tf, the DMACK to + * read data released. If one SCLK pulse is longer than + * this maximum value then the MDMA mode + * cannot be supported at this frequency. + */ + while (mode > 0 && mdma_fsclk[mode] > fsclk) + mode--; + + nf = num_clocks_min(tfmin, fsclk); + if (nf >= 1) { + /* calculate the timing values for Multi-word DMA. */ + + /* DIOR/DIOW asserted pulse width */ + td = num_clocks_min(mdma_tdmin[mode], fsclk); + + /* DIOR negated pulse width */ + tkw = num_clocks_min(mdma_tkwmin[mode], fsclk); + + /* Cycle Time */ + n0 = num_clocks_min(mdma_t0min[mode], fsclk); + + /* increase tk until we meed the minimum cycle length */ + if (tkw + td < n0) + tkw = n0 - td; + + /* DIOR negated pulse width - read */ + tkr = num_clocks_min(mdma_tkrmin[mode], fsclk); + /* CS{1:0] valid to DIOR/DIOW */ + tm = num_clocks_min(mdma_tmmin[mode], fsclk); + /* DIOR/DIOW to DMACK hold */ + teoc = num_clocks_min(mdma_tjmin[mode], fsclk); + /* DIOW Data hold */ + th = num_clocks_min(mdma_thmin[mode], fsclk); + + ATAPI_SET_MULTI_TIM_0(base, (tm<<8 | td)); + ATAPI_SET_MULTI_TIM_1(base, (tkr<<8 | tkw)); + ATAPI_SET_MULTI_TIM_2(base, (teoc<<8 | th)); + SSYNC(); + } + } + return; +} + +/** + * + * Function: wait_complete + * + * Description: Waits the interrupt from device + * + */ +static inline void wait_complete(void __iomem *base, unsigned short mask) +{ + unsigned short status; + unsigned int i = 0; + +#define PATA_BF54X_WAIT_TIMEOUT 10000 + + for (i = 0; i < PATA_BF54X_WAIT_TIMEOUT; i++) { + status = ATAPI_GET_INT_STATUS(base) & mask; + if (status) + break; + } + + ATAPI_SET_INT_STATUS(base, mask); +} + +/** + * + * Function: write_atapi_register + * + * Description: Writes to ATA Device Resgister + * + */ + +static void write_atapi_register(void __iomem *base, + unsigned long ata_reg, unsigned short value) +{ + /* Program the ATA_DEV_TXBUF register with write data (to be + * written into the device). + */ + ATAPI_SET_DEV_TXBUF(base, value); + + /* Program the ATA_DEV_ADDR register with address of the + * device register (0x01 to 0x0F). + */ + ATAPI_SET_DEV_ADDR(base, ata_reg); + + /* Program the ATA_CTRL register with dir set to write (1) + */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | XFER_DIR)); + + /* ensure PIO DMA is not set */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA)); + + /* and start the transfer */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START)); + + /* Wait for the interrupt to indicate the end of the transfer. + * (We need to wait on and clear rhe ATA_DEV_INT interrupt status) + */ + wait_complete(base, PIO_DONE_INT); +} + +/** + * + * Function: read_atapi_register + * + *Description: Reads from ATA Device Resgister + * + */ + +static unsigned short read_atapi_register(void __iomem *base, + unsigned long ata_reg) +{ + /* Program the ATA_DEV_ADDR register with address of the + * device register (0x01 to 0x0F). + */ + ATAPI_SET_DEV_ADDR(base, ata_reg); + + /* Program the ATA_CTRL register with dir set to read (0) and + */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~XFER_DIR)); + + /* ensure PIO DMA is not set */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA)); + + /* and start the transfer */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START)); + + /* Wait for the interrupt to indicate the end of the transfer. + * (PIO_DONE interrupt is set and it doesn't seem to matter + * that we don't clear it) + */ + wait_complete(base, PIO_DONE_INT); + + /* Read the ATA_DEV_RXBUF register with write data (to be + * written into the device). + */ + return ATAPI_GET_DEV_RXBUF(base); +} + +/** + * + * Function: write_atapi_register_data + * + * Description: Writes to ATA Device Resgister + * + */ + +static void write_atapi_data(void __iomem *base, + int len, unsigned short *buf) +{ + int i; + + /* Set transfer length to 1 */ + ATAPI_SET_XFER_LEN(base, 1); + + /* Program the ATA_DEV_ADDR register with address of the + * ATA_REG_DATA + */ + ATAPI_SET_DEV_ADDR(base, ATA_REG_DATA); + + /* Program the ATA_CTRL register with dir set to write (1) + */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | XFER_DIR)); + + /* ensure PIO DMA is not set */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA)); + + for (i = 0; i < len; i++) { + /* Program the ATA_DEV_TXBUF register with write data (to be + * written into the device). + */ + ATAPI_SET_DEV_TXBUF(base, buf[i]); + + /* and start the transfer */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START)); + + /* Wait for the interrupt to indicate the end of the transfer. + * (We need to wait on and clear rhe ATA_DEV_INT + * interrupt status) + */ + wait_complete(base, PIO_DONE_INT); + } +} + +/** + * + * Function: read_atapi_register_data + * + * Description: Reads from ATA Device Resgister + * + */ + +static void read_atapi_data(void __iomem *base, + int len, unsigned short *buf) +{ + int i; + + /* Set transfer length to 1 */ + ATAPI_SET_XFER_LEN(base, 1); + + /* Program the ATA_DEV_ADDR register with address of the + * ATA_REG_DATA + */ + ATAPI_SET_DEV_ADDR(base, ATA_REG_DATA); + + /* Program the ATA_CTRL register with dir set to read (0) and + */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~XFER_DIR)); + + /* ensure PIO DMA is not set */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA)); + + for (i = 0; i < len; i++) { + /* and start the transfer */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START)); + + /* Wait for the interrupt to indicate the end of the transfer. + * (PIO_DONE interrupt is set and it doesn't seem to matter + * that we don't clear it) + */ + wait_complete(base, PIO_DONE_INT); + + /* Read the ATA_DEV_RXBUF register with write data (to be + * written into the device). + */ + buf[i] = ATAPI_GET_DEV_RXBUF(base); + } +} + +/** + * bfin_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Note: Original code is ata_sff_tf_load(). + */ + +static void bfin_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + write_atapi_register(base, ATA_REG_CTRL, tf->ctl); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr) { + if (tf->flags & ATA_TFLAG_LBA48) { + write_atapi_register(base, ATA_REG_FEATURE, + tf->hob_feature); + write_atapi_register(base, ATA_REG_NSECT, + tf->hob_nsect); + write_atapi_register(base, ATA_REG_LBAL, tf->hob_lbal); + write_atapi_register(base, ATA_REG_LBAM, tf->hob_lbam); + write_atapi_register(base, ATA_REG_LBAH, tf->hob_lbah); + dev_dbg(ap->dev, "hob: feat 0x%X nsect 0x%X, lba 0x%X " + "0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + + write_atapi_register(base, ATA_REG_FEATURE, tf->feature); + write_atapi_register(base, ATA_REG_NSECT, tf->nsect); + write_atapi_register(base, ATA_REG_LBAL, tf->lbal); + write_atapi_register(base, ATA_REG_LBAM, tf->lbam); + write_atapi_register(base, ATA_REG_LBAH, tf->lbah); + dev_dbg(ap->dev, "feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + write_atapi_register(base, ATA_REG_DEVICE, tf->device); + dev_dbg(ap->dev, "device 0x%X\n", tf->device); + } + + ata_wait_idle(ap); +} + +/** + * bfin_check_status - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Note: Original code is ata_check_status(). + */ + +static u8 bfin_check_status(struct ata_port *ap) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + return read_atapi_register(base, ATA_REG_STATUS); +} + +/** + * bfin_tf_read - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Note: Original code is ata_sff_tf_read(). + */ + +static void bfin_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + + tf->command = bfin_check_status(ap); + tf->feature = read_atapi_register(base, ATA_REG_ERR); + tf->nsect = read_atapi_register(base, ATA_REG_NSECT); + tf->lbal = read_atapi_register(base, ATA_REG_LBAL); + tf->lbam = read_atapi_register(base, ATA_REG_LBAM); + tf->lbah = read_atapi_register(base, ATA_REG_LBAH); + tf->device = read_atapi_register(base, ATA_REG_DEVICE); + + if (tf->flags & ATA_TFLAG_LBA48) { + write_atapi_register(base, ATA_REG_CTRL, tf->ctl | ATA_HOB); + tf->hob_feature = read_atapi_register(base, ATA_REG_ERR); + tf->hob_nsect = read_atapi_register(base, ATA_REG_NSECT); + tf->hob_lbal = read_atapi_register(base, ATA_REG_LBAL); + tf->hob_lbam = read_atapi_register(base, ATA_REG_LBAM); + tf->hob_lbah = read_atapi_register(base, ATA_REG_LBAH); + } +} + +/** + * bfin_exec_command - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Note: Original code is ata_sff_exec_command(). + */ + +static void bfin_exec_command(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + dev_dbg(ap->dev, "ata%u: cmd 0x%X\n", ap->print_id, tf->command); + + write_atapi_register(base, ATA_REG_CMD, tf->command); + ata_sff_pause(ap); +} + +/** + * bfin_check_altstatus - Read device alternate status reg + * @ap: port where the device is + */ + +static u8 bfin_check_altstatus(struct ata_port *ap) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + return read_atapi_register(base, ATA_REG_ALTSTATUS); +} + +/** + * bfin_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * + * Note: Original code is ata_sff_dev_select(). + */ + +static void bfin_dev_select(struct ata_port *ap, unsigned int device) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + u8 tmp; + + if (device == 0) + tmp = ATA_DEVICE_OBS; + else + tmp = ATA_DEVICE_OBS | ATA_DEV1; + + write_atapi_register(base, ATA_REG_DEVICE, tmp); + ata_sff_pause(ap); +} + +/** + * bfin_set_devctl - Write device control reg + * @ap: port where the device is + * @ctl: value to write + */ + +static void bfin_set_devctl(struct ata_port *ap, u8 ctl) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + write_atapi_register(base, ATA_REG_CTRL, ctl); +} + +/** + * bfin_bmdma_setup - Set up IDE DMA transaction + * @qc: Info associated with this ATA transaction. + * + * Note: Original code is ata_bmdma_setup(). + */ + +static void bfin_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct dma_desc_array *dma_desc_cpu = (struct dma_desc_array *)ap->bmdma_prd; + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + unsigned short config = DMAFLOW_ARRAY | NDSIZE_5 | RESTART | WDSIZE_16 | DMAEN; + struct scatterlist *sg; + unsigned int si; + unsigned int channel; + unsigned int dir; + unsigned int size = 0; + + dev_dbg(qc->ap->dev, "in atapi dma setup\n"); + /* Program the ATA_CTRL register with dir */ + if (qc->tf.flags & ATA_TFLAG_WRITE) { + channel = CH_ATAPI_TX; + dir = DMA_TO_DEVICE; + } else { + channel = CH_ATAPI_RX; + dir = DMA_FROM_DEVICE; + config |= WNR; + } + + dma_map_sg(ap->dev, qc->sg, qc->n_elem, dir); + + /* fill the ATAPI DMA controller */ + for_each_sg(qc->sg, sg, qc->n_elem, si) { + dma_desc_cpu[si].start_addr = sg_dma_address(sg); + dma_desc_cpu[si].cfg = config; + dma_desc_cpu[si].x_count = sg_dma_len(sg) >> 1; + dma_desc_cpu[si].x_modify = 2; + size += sg_dma_len(sg); + } + + /* Set the last descriptor to stop mode */ + dma_desc_cpu[qc->n_elem - 1].cfg &= ~(DMAFLOW | NDSIZE); + + flush_dcache_range((unsigned int)dma_desc_cpu, + (unsigned int)dma_desc_cpu + + qc->n_elem * sizeof(struct dma_desc_array)); + + /* Enable ATA DMA operation*/ + set_dma_curr_desc_addr(channel, (unsigned long *)ap->bmdma_prd_dma); + set_dma_x_count(channel, 0); + set_dma_x_modify(channel, 0); + set_dma_config(channel, config); + + SSYNC(); + + /* Send ATA DMA command */ + bfin_exec_command(ap, &qc->tf); + + if (qc->tf.flags & ATA_TFLAG_WRITE) { + /* set ATA DMA write direction */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) + | XFER_DIR)); + } else { + /* set ATA DMA read direction */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) + & ~XFER_DIR)); + } + + /* Reset all transfer count */ + ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | TFRCNT_RST); + + /* Set ATAPI state machine contorl in terminate sequence */ + ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | END_ON_TERM); + + /* Set transfer length to the total size of sg buffers */ + ATAPI_SET_XFER_LEN(base, size >> 1); +} + +/** + * bfin_bmdma_start - Start an IDE DMA transaction + * @qc: Info associated with this ATA transaction. + * + * Note: Original code is ata_bmdma_start(). + */ + +static void bfin_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + + dev_dbg(qc->ap->dev, "in atapi dma start\n"); + + if (!(ap->udma_mask || ap->mwdma_mask)) + return; + + /* start ATAPI transfer*/ + if (ap->udma_mask) + ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) + | ULTRA_START); + else + ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) + | MULTI_START); +} + +/** + * bfin_bmdma_stop - Stop IDE DMA transfer + * @qc: Command we are ending DMA for + */ + +static void bfin_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int dir; + + dev_dbg(qc->ap->dev, "in atapi dma stop\n"); + + if (!(ap->udma_mask || ap->mwdma_mask)) + return; + + /* stop ATAPI DMA controller*/ + if (qc->tf.flags & ATA_TFLAG_WRITE) { + dir = DMA_TO_DEVICE; + disable_dma(CH_ATAPI_TX); + } else { + dir = DMA_FROM_DEVICE; + disable_dma(CH_ATAPI_RX); + } + + dma_unmap_sg(ap->dev, qc->sg, qc->n_elem, dir); +} + +/** + * bfin_devchk - PATA device presence detection + * @ap: ATA channel to examine + * @device: Device to examine (starting at zero) + * + * Note: Original code is ata_devchk(). + */ + +static unsigned int bfin_devchk(struct ata_port *ap, + unsigned int device) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + u8 nsect, lbal; + + bfin_dev_select(ap, device); + + write_atapi_register(base, ATA_REG_NSECT, 0x55); + write_atapi_register(base, ATA_REG_LBAL, 0xaa); + + write_atapi_register(base, ATA_REG_NSECT, 0xaa); + write_atapi_register(base, ATA_REG_LBAL, 0x55); + + write_atapi_register(base, ATA_REG_NSECT, 0x55); + write_atapi_register(base, ATA_REG_LBAL, 0xaa); + + nsect = read_atapi_register(base, ATA_REG_NSECT); + lbal = read_atapi_register(base, ATA_REG_LBAL); + + if ((nsect == 0x55) && (lbal == 0xaa)) + return 1; /* we found a device */ + + return 0; /* nothing found */ +} + +/** + * bfin_bus_post_reset - PATA device post reset + * + * Note: Original code is ata_bus_post_reset(). + */ + +static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + unsigned int dev0 = devmask & (1 << 0); + unsigned int dev1 = devmask & (1 << 1); + unsigned long deadline; + + /* if device 0 was found in ata_devchk, wait for its + * BSY bit to clear + */ + if (dev0) + ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + + /* if device 1 was found in ata_devchk, wait for + * register access, then wait for BSY to clear + */ + deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT); + while (dev1) { + u8 nsect, lbal; + + bfin_dev_select(ap, 1); + nsect = read_atapi_register(base, ATA_REG_NSECT); + lbal = read_atapi_register(base, ATA_REG_LBAL); + if ((nsect == 1) && (lbal == 1)) + break; + if (time_after(jiffies, deadline)) { + dev1 = 0; + break; + } + ata_msleep(ap, 50); /* give drive a breather */ + } + if (dev1) + ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + + /* is all this really necessary? */ + bfin_dev_select(ap, 0); + if (dev1) + bfin_dev_select(ap, 1); + if (dev0) + bfin_dev_select(ap, 0); +} + +/** + * bfin_bus_softreset - PATA device software reset + * + * Note: Original code is ata_bus_softreset(). + */ + +static unsigned int bfin_bus_softreset(struct ata_port *ap, + unsigned int devmask) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + + /* software reset. causes dev0 to be selected */ + write_atapi_register(base, ATA_REG_CTRL, ap->ctl); + udelay(20); + write_atapi_register(base, ATA_REG_CTRL, ap->ctl | ATA_SRST); + udelay(20); + write_atapi_register(base, ATA_REG_CTRL, ap->ctl); + + /* spec mandates ">= 2ms" before checking status. + * We wait 150ms, because that was the magic delay used for + * ATAPI devices in Hale Landis's ATADRVR, for the period of time + * between when the ATA command register is written, and then + * status is checked. Because waiting for "a while" before + * checking status is fine, post SRST, we perform this magic + * delay here as well. + * + * Old drivers/ide uses the 2mS rule and then waits for ready + */ + ata_msleep(ap, 150); + + /* Before we perform post reset processing we want to see if + * the bus shows 0xFF because the odd clown forgets the D7 + * pulldown resistor. + */ + if (bfin_check_status(ap) == 0xFF) + return 0; + + bfin_bus_post_reset(ap, devmask); + + return 0; +} + +/** + * bfin_softreset - reset host port via ATA SRST + * @ap: port to reset + * @classes: resulting classes of attached devices + * + * Note: Original code is ata_sff_softreset(). + */ + +static int bfin_softreset(struct ata_link *link, unsigned int *classes, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; + unsigned int devmask = 0, err_mask; + u8 err; + + /* determine if device 0/1 are present */ + if (bfin_devchk(ap, 0)) + devmask |= (1 << 0); + if (slave_possible && bfin_devchk(ap, 1)) + devmask |= (1 << 1); + + /* select device 0 again */ + bfin_dev_select(ap, 0); + + /* issue bus reset */ + err_mask = bfin_bus_softreset(ap, devmask); + if (err_mask) { + ata_port_err(ap, "SRST failed (err_mask=0x%x)\n", + err_mask); + return -EIO; + } + + /* determine by signature whether we have ATA or ATAPI devices */ + classes[0] = ata_sff_dev_classify(&ap->link.device[0], + devmask & (1 << 0), &err); + if (slave_possible && err != 0x81) + classes[1] = ata_sff_dev_classify(&ap->link.device[1], + devmask & (1 << 1), &err); + + return 0; +} + +/** + * bfin_bmdma_status - Read IDE DMA status + * @ap: Port associated with this ATA transaction. + */ + +static unsigned char bfin_bmdma_status(struct ata_port *ap) +{ + unsigned char host_stat = 0; + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + + if (ATAPI_GET_STATUS(base) & (MULTI_XFER_ON | ULTRA_XFER_ON)) + host_stat |= ATA_DMA_ACTIVE; + if (ATAPI_GET_INT_STATUS(base) & ATAPI_DEV_INT) + host_stat |= ATA_DMA_INTR; + + dev_dbg(ap->dev, "ATAPI: host_stat=0x%x\n", host_stat); + + return host_stat; +} + +/** + * bfin_data_xfer - Transfer data by PIO + * @adev: device for this I/O + * @buf: data buffer + * @buflen: buffer length + * @write_data: read/write + * + * Note: Original code is ata_sff_data_xfer(). + */ + +static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) +{ + struct ata_port *ap = dev->link->ap; + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + unsigned int words = buflen >> 1; + unsigned short *buf16 = (u16 *)buf; + + /* Transfer multiple of 2 bytes */ + if (rw == READ) + read_atapi_data(base, words, buf16); + else + write_atapi_data(base, words, buf16); + + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + unsigned short align_buf[1] = { 0 }; + unsigned char *trailing_buf = buf + buflen - 1; + + if (rw == READ) { + read_atapi_data(base, 1, align_buf); + memcpy(trailing_buf, align_buf, 1); + } else { + memcpy(align_buf, trailing_buf, 1); + write_atapi_data(base, 1, align_buf); + } + words++; + } + + return words << 1; +} + +/** + * bfin_irq_clear - Clear ATAPI interrupt. + * @ap: Port associated with this ATA transaction. + * + * Note: Original code is ata_bmdma_irq_clear(). + */ + +static void bfin_irq_clear(struct ata_port *ap) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + + dev_dbg(ap->dev, "in atapi irq clear\n"); + ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT + | MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT + | MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT); +} + +/** + * bfin_thaw - Thaw DMA controller port + * @ap: port to thaw + * + * Note: Original code is ata_sff_thaw(). + */ + +void bfin_thaw(struct ata_port *ap) +{ + dev_dbg(ap->dev, "in atapi dma thaw\n"); + bfin_check_status(ap); + ata_sff_irq_on(ap); +} + +/** + * bfin_postreset - standard postreset callback + * @ap: the target ata_port + * @classes: classes of attached devices + * + * Note: Original code is ata_sff_postreset(). + */ + +static void bfin_postreset(struct ata_link *link, unsigned int *classes) +{ + struct ata_port *ap = link->ap; + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + + /* re-enable interrupts */ + ata_sff_irq_on(ap); + + /* is double-select really necessary? */ + if (classes[0] != ATA_DEV_NONE) + bfin_dev_select(ap, 1); + if (classes[1] != ATA_DEV_NONE) + bfin_dev_select(ap, 0); + + /* bail out if no device is present */ + if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { + return; + } + + /* set up device control */ + write_atapi_register(base, ATA_REG_CTRL, ap->ctl); +} + +static void bfin_port_stop(struct ata_port *ap) +{ + dev_dbg(ap->dev, "in atapi port stop\n"); + if (ap->udma_mask != 0 || ap->mwdma_mask != 0) { + dma_free_coherent(ap->dev, + BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array), + ap->bmdma_prd, + ap->bmdma_prd_dma); + + free_dma(CH_ATAPI_RX); + free_dma(CH_ATAPI_TX); + } +} + +static int bfin_port_start(struct ata_port *ap) +{ + dev_dbg(ap->dev, "in atapi port start\n"); + if (!(ap->udma_mask || ap->mwdma_mask)) + return 0; + + ap->bmdma_prd = dma_alloc_coherent(ap->dev, + BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array), + &ap->bmdma_prd_dma, + GFP_KERNEL); + + if (ap->bmdma_prd == NULL) { + dev_info(ap->dev, "Unable to allocate DMA descriptor array.\n"); + goto out; + } + + if (request_dma(CH_ATAPI_RX, "BFIN ATAPI RX DMA") >= 0) { + if (request_dma(CH_ATAPI_TX, + "BFIN ATAPI TX DMA") >= 0) + return 0; + + free_dma(CH_ATAPI_RX); + dma_free_coherent(ap->dev, + BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array), + ap->bmdma_prd, + ap->bmdma_prd_dma); + } + +out: + ap->udma_mask = 0; + ap->mwdma_mask = 0; + dev_err(ap->dev, "Unable to request ATAPI DMA!" + " Continue in PIO mode.\n"); + + return 0; +} + +static unsigned int bfin_ata_host_intr(struct ata_port *ap, + struct ata_queued_cmd *qc) +{ + struct ata_eh_info *ehi = &ap->link.eh_info; + u8 status, host_stat = 0; + + VPRINTK("ata%u: protocol %d task_state %d\n", + ap->print_id, qc->tf.protocol, ap->hsm_task_state); + + /* Check whether we are expecting interrupt in this state */ + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ + + /* Check the ATA_DFLAG_CDB_INTR flag is enough here. + * The flag was turned on only for atapi devices. + * No need to check is_atapi_taskfile(&qc->tf) again. + */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + goto idle_irq; + break; + case HSM_ST_LAST: + if (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATAPI_PROT_DMA) { + /* check status of DMA engine */ + host_stat = ap->ops->bmdma_status(ap); + VPRINTK("ata%u: host_stat 0x%X\n", + ap->print_id, host_stat); + + /* if it's not our irq... */ + if (!(host_stat & ATA_DMA_INTR)) + goto idle_irq; + + /* before we do anything else, clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + if (unlikely(host_stat & ATA_DMA_ERR)) { + /* error when transferring data to/from memory */ + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } + } + break; + case HSM_ST: + break; + default: + goto idle_irq; + } + + /* check altstatus */ + status = ap->ops->sff_check_altstatus(ap); + if (status & ATA_BUSY) + goto busy_ata; + + /* check main status, clearing INTRQ */ + status = ap->ops->sff_check_status(ap); + if (unlikely(status & ATA_BUSY)) + goto busy_ata; + + /* ack bmdma irq events */ + ap->ops->sff_irq_clear(ap); + + ata_sff_hsm_move(ap, qc, status, 0); + + if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATAPI_PROT_DMA)) + ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat); + +busy_ata: + return 1; /* irq handled */ + +idle_irq: + ap->stats.idle_irq++; + +#ifdef ATA_IRQ_TRAP + if ((ap->stats.idle_irq % 1000) == 0) { + ap->ops->irq_ack(ap, 0); /* debug trap */ + ata_port_warn(ap, "irq trap\n"); + return 1; + } +#endif + return 0; /* irq not handled */ +} + +static irqreturn_t bfin_ata_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + unsigned int i; + unsigned int handled = 0; + unsigned long flags; + + /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ + spin_lock_irqsave(&host->lock, flags); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) + handled |= bfin_ata_host_intr(ap, qc); + } + + spin_unlock_irqrestore(&host->lock, flags); + + return IRQ_RETVAL(handled); +} + + +static struct scsi_host_template bfin_sht = { + ATA_BASE_SHT(DRV_NAME), + .sg_tablesize = BFIN_MAX_SG_SEGMENTS, + .dma_boundary = ATA_DMA_BOUNDARY, +}; + +static struct ata_port_operations bfin_pata_ops = { + .inherits = &ata_bmdma_port_ops, + + .set_piomode = bfin_set_piomode, + .set_dmamode = bfin_set_dmamode, + + .sff_tf_load = bfin_tf_load, + .sff_tf_read = bfin_tf_read, + .sff_exec_command = bfin_exec_command, + .sff_check_status = bfin_check_status, + .sff_check_altstatus = bfin_check_altstatus, + .sff_dev_select = bfin_dev_select, + .sff_set_devctl = bfin_set_devctl, + + .bmdma_setup = bfin_bmdma_setup, + .bmdma_start = bfin_bmdma_start, + .bmdma_stop = bfin_bmdma_stop, + .bmdma_status = bfin_bmdma_status, + .sff_data_xfer = bfin_data_xfer, + + .qc_prep = ata_noop_qc_prep, + + .thaw = bfin_thaw, + .softreset = bfin_softreset, + .postreset = bfin_postreset, + + .sff_irq_clear = bfin_irq_clear, + + .port_start = bfin_port_start, + .port_stop = bfin_port_stop, +}; + +static struct ata_port_info bfin_port_info[] = { + { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = 0, + .udma_mask = 0, + .port_ops = &bfin_pata_ops, + }, +}; + +/** + * bfin_reset_controller - initialize BF54x ATAPI controller. + */ + +static int bfin_reset_controller(struct ata_host *host) +{ + void __iomem *base = (void __iomem *)host->ports[0]->ioaddr.ctl_addr; + int count; + unsigned short status; + + /* Disable all ATAPI interrupts */ + ATAPI_SET_INT_MASK(base, 0); + SSYNC(); + + /* Assert the RESET signal 25us*/ + ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | DEV_RST); + udelay(30); + + /* Negate the RESET signal for 2ms*/ + ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) & ~DEV_RST); + msleep(2); + + /* Wait on Busy flag to clear */ + count = 10000000; + do { + status = read_atapi_register(base, ATA_REG_STATUS); + } while (--count && (status & ATA_BUSY)); + + /* Enable only ATAPI Device interrupt */ + ATAPI_SET_INT_MASK(base, 1); + SSYNC(); + + return (!count); +} + +/** + * atapi_io_port - define atapi peripheral port pins. + */ +static unsigned short atapi_io_port[] = { + P_ATAPI_RESET, + P_ATAPI_DIOR, + P_ATAPI_DIOW, + P_ATAPI_CS0, + P_ATAPI_CS1, + P_ATAPI_DMACK, + P_ATAPI_DMARQ, + P_ATAPI_INTRQ, + P_ATAPI_IORDY, + P_ATAPI_D0A, + P_ATAPI_D1A, + P_ATAPI_D2A, + P_ATAPI_D3A, + P_ATAPI_D4A, + P_ATAPI_D5A, + P_ATAPI_D6A, + P_ATAPI_D7A, + P_ATAPI_D8A, + P_ATAPI_D9A, + P_ATAPI_D10A, + P_ATAPI_D11A, + P_ATAPI_D12A, + P_ATAPI_D13A, + P_ATAPI_D14A, + P_ATAPI_D15A, + P_ATAPI_A0A, + P_ATAPI_A1A, + P_ATAPI_A2A, + 0 +}; + +/** + * bfin_atapi_probe - attach a bfin atapi interface + * @pdev: platform device + * + * Register a bfin atapi interface. + * + * + * Platform devices are expected to contain 2 resources per port: + * + * - I/O Base (IORESOURCE_IO) + * - IRQ (IORESOURCE_IRQ) + * + */ +static int bfin_atapi_probe(struct platform_device *pdev) +{ + int board_idx = 0; + struct resource *res; + struct ata_host *host; + unsigned int fsclk = get_sclk(); + int udma_mode = 5; + const struct ata_port_info *ppi[] = + { &bfin_port_info[board_idx], NULL }; + + /* + * Simple resource validation .. + */ + if (unlikely(pdev->num_resources != 2)) { + dev_err(&pdev->dev, "invalid number of resources\n"); + return -EINVAL; + } + + /* + * Get the register base first + */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) + return -EINVAL; + + while (bfin_port_info[board_idx].udma_mask > 0 && + udma_fsclk[udma_mode] > fsclk) { + udma_mode--; + bfin_port_info[board_idx].udma_mask >>= 1; + } + + /* + * Now that that's out of the way, wire up the port.. + */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1); + if (!host) + return -ENOMEM; + + host->ports[0]->ioaddr.ctl_addr = (void *)res->start; + + if (peripheral_request_list(atapi_io_port, "atapi-io-port")) { + dev_err(&pdev->dev, "Requesting Peripherals failed\n"); + return -EFAULT; + } + + if (bfin_reset_controller(host)) { + peripheral_free_list(atapi_io_port); + dev_err(&pdev->dev, "Fail to reset ATAPI device\n"); + return -EFAULT; + } + + if (ata_host_activate(host, platform_get_irq(pdev, 0), + bfin_ata_interrupt, IRQF_SHARED, &bfin_sht) != 0) { + peripheral_free_list(atapi_io_port); + dev_err(&pdev->dev, "Fail to attach ATAPI device\n"); + return -ENODEV; + } + + platform_set_drvdata(pdev, host); + + return 0; +} + +/** + * bfin_atapi_remove - unplug a bfin atapi interface + * @pdev: platform device + * + * A bfin atapi device has been unplugged. Perform the needed + * cleanup. Also called on module unload for any active devices. + */ +static int bfin_atapi_remove(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + + ata_host_detach(host); + + peripheral_free_list(atapi_io_port); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int bfin_atapi_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct ata_host *host = platform_get_drvdata(pdev); + if (host) + return ata_host_suspend(host, state); + else + return 0; +} + +static int bfin_atapi_resume(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + int ret; + + if (host) { + ret = bfin_reset_controller(host); + if (ret) { + printk(KERN_ERR DRV_NAME ": Error during HW init\n"); + return ret; + } + ata_host_resume(host); + } + + return 0; +} +#else +#define bfin_atapi_suspend NULL +#define bfin_atapi_resume NULL +#endif + +static struct platform_driver bfin_atapi_driver = { + .probe = bfin_atapi_probe, + .remove = bfin_atapi_remove, + .suspend = bfin_atapi_suspend, + .resume = bfin_atapi_resume, + .driver = { + .name = DRV_NAME, + }, +}; + +#define ATAPI_MODE_SIZE 10 +static char bfin_atapi_mode[ATAPI_MODE_SIZE]; + +static int __init bfin_atapi_init(void) +{ + pr_info("register bfin atapi driver\n"); + + switch(bfin_atapi_mode[0]) { + case 'p': + case 'P': + break; + case 'm': + case 'M': + bfin_port_info[0].mwdma_mask = ATA_MWDMA2; + break; + default: + bfin_port_info[0].udma_mask = ATA_UDMA5; + }; + + return platform_driver_register(&bfin_atapi_driver); +} + +static void __exit bfin_atapi_exit(void) +{ + platform_driver_unregister(&bfin_atapi_driver); +} + +module_init(bfin_atapi_init); +module_exit(bfin_atapi_exit); +/* + * ATAPI mode: + * pio/PIO + * udma/UDMA (default) + * mwdma/MWDMA + */ +module_param_string(bfin_atapi_mode, bfin_atapi_mode, ATAPI_MODE_SIZE, 0); + +MODULE_AUTHOR("Sonic Zhang "); +MODULE_DESCRIPTION("PATA driver for blackfin 54x ATAPI controller"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c new file mode 100644 index 000000000..c47caa807 --- /dev/null +++ b/drivers/ata/pata_cmd640.c @@ -0,0 +1,271 @@ +/* + * pata_cmd640.c - CMD640 PCI PATA for new ATA layer + * (C) 2007 Red Hat Inc + * + * Based upon + * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996 + * + * Copyright (C) 1995-1996 Linus Torvalds & authors (see driver) + * + * This drives only the PCI version of the controller. If you have a + * VLB one then we have enough docs to support it but you can write + * your own code. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_cmd640" +#define DRV_VERSION "0.0.5" + +struct cmd640_reg { + int last; + u8 reg58[ATA_MAX_DEVICES]; +}; + +enum { + CFR = 0x50, + CNTRL = 0x51, + CMDTIM = 0x52, + ARTIM0 = 0x53, + DRWTIM0 = 0x54, + ARTIM23 = 0x57, + DRWTIM23 = 0x58, + BRST = 0x59 +}; + +/** + * cmd640_set_piomode - set initial PIO mode data + * @ap: ATA port + * @adev: ATA device + * + * Called to do the PIO mode setup. + */ + +static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct cmd640_reg *timing = ap->private_data; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_timing t; + const unsigned long T = 1000000 / 33; + const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 }; + u8 reg; + int arttim = ARTIM0 + 2 * adev->devno; + struct ata_device *pair = ata_dev_pair(adev); + + if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) { + printk(KERN_ERR DRV_NAME ": mode computation failed.\n"); + return; + } + + /* The second channel has shared timings and the setup timing is + messy to switch to merge it for worst case */ + if (ap->port_no && pair) { + struct ata_timing p; + ata_timing_compute(pair, pair->pio_mode, &p, T, 1); + ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP); + } + + /* Make the timings fit */ + if (t.recover > 16) { + t.active += t.recover - 16; + t.recover = 16; + } + if (t.active > 16) + t.active = 16; + + /* Now convert the clocks into values we can actually stuff into + the chip */ + + if (t.recover > 1) + t.recover--; /* 640B only */ + else + t.recover = 15; + + if (t.setup > 4) + t.setup = 0xC0; + else + t.setup = setup_data[t.setup]; + + if (ap->port_no == 0) { + t.active &= 0x0F; /* 0 = 16 */ + + /* Load setup timing */ + pci_read_config_byte(pdev, arttim, ®); + reg &= 0x3F; + reg |= t.setup; + pci_write_config_byte(pdev, arttim, reg); + + /* Load active/recovery */ + pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover); + } else { + /* Save the shared timings for channel, they will be loaded + by qc_issue. Reloading the setup time is expensive so we + keep a merged one loaded */ + pci_read_config_byte(pdev, ARTIM23, ®); + reg &= 0x3F; + reg |= t.setup; + pci_write_config_byte(pdev, ARTIM23, reg); + timing->reg58[adev->devno] = (t.active << 4) | t.recover; + } +} + + +/** + * cmd640_qc_issue - command preparation hook + * @qc: Command to be issued + * + * Channel 1 has shared timings. We must reprogram the + * clock each drive 2/3 switch we do. + */ + +static unsigned int cmd640_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct cmd640_reg *timing = ap->private_data; + + if (ap->port_no != 0 && adev->devno != timing->last) { + pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]); + timing->last = adev->devno; + } + return ata_sff_qc_issue(qc); +} + +/** + * cmd640_port_start - port setup + * @ap: ATA port being set up + * + * The CMD640 needs to maintain private data structures so we + * allocate space here. + */ + +static int cmd640_port_start(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct cmd640_reg *timing; + + timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL); + if (timing == NULL) + return -ENOMEM; + timing->last = -1; /* Force a load */ + ap->private_data = timing; + return 0; +} + +static bool cmd640_sff_irq_check(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int irq_reg = ap->port_no ? ARTIM23 : CFR; + u8 irq_stat, irq_mask = ap->port_no ? 0x10 : 0x04; + + pci_read_config_byte(pdev, irq_reg, &irq_stat); + + return irq_stat & irq_mask; +} + +static struct scsi_host_template cmd640_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations cmd640_port_ops = { + .inherits = &ata_sff_port_ops, + /* In theory xfer_noirq is not needed once we kill the prefetcher */ + .sff_data_xfer = ata_sff_data_xfer_noirq, + .sff_irq_check = cmd640_sff_irq_check, + .qc_issue = cmd640_qc_issue, + .cable_detect = ata_cable_40wire, + .set_piomode = cmd640_set_piomode, + .port_start = cmd640_port_start, +}; + +static void cmd640_hardware_init(struct pci_dev *pdev) +{ + u8 ctrl; + + /* CMD640 detected, commiserations */ + pci_write_config_byte(pdev, 0x5B, 0x00); + /* PIO0 command cycles */ + pci_write_config_byte(pdev, CMDTIM, 0); + /* 512 byte bursts (sector) */ + pci_write_config_byte(pdev, BRST, 0x40); + /* + * A reporter a long time ago + * Had problems with the data fifo + * So don't run the risk + * Of putting crap on the disk + * For its better just to go slow + */ + /* Do channel 0 */ + pci_read_config_byte(pdev, CNTRL, &ctrl); + pci_write_config_byte(pdev, CNTRL, ctrl | 0xC0); + /* Ditto for channel 1 */ + pci_read_config_byte(pdev, ARTIM23, &ctrl); + ctrl |= 0x0C; + pci_write_config_byte(pdev, ARTIM23, ctrl); +} + +static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .port_ops = &cmd640_port_ops + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + int rc; + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + cmd640_hardware_init(pdev); + + return ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int cmd640_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + cmd640_hardware_init(pdev); + ata_host_resume(host); + return 0; +} +#endif + +static const struct pci_device_id cmd640[] = { + { PCI_VDEVICE(CMD, 0x640), 0 }, + { }, +}; + +static struct pci_driver cmd640_pci_driver = { + .name = DRV_NAME, + .id_table = cmd640, + .probe = cmd640_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = cmd640_reinit_one, +#endif +}; + +module_pci_driver(cmd640_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for CMD640 PATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cmd640); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c new file mode 100644 index 000000000..13ca58832 --- /dev/null +++ b/drivers/ata/pata_cmd64x.c @@ -0,0 +1,533 @@ +/* + * pata_cmd64x.c - CMD64x PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * (C) 2009-2010 Bartlomiej Zolnierkiewicz + * (C) 2012 MontaVista Software, LLC + * + * Based upon + * linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002 + * + * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines. + * Note, this driver is not used at all on other systems because + * there the "BIOS" has done all of the following already. + * Due to massive hardware bugs, UltraDMA is only supported + * on the 646U2 and not on the 646U. + * + * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 1998 David S. Miller (davem@redhat.com) + * + * Copyright (C) 1999-2002 Andre Hedrick + * + * TODO + * Testing work + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_cmd64x" +#define DRV_VERSION "0.2.18" + +/* + * CMD64x specific registers definition. + */ + +enum { + CFR = 0x50, + CFR_INTR_CH0 = 0x04, + CNTRL = 0x51, + CNTRL_CH0 = 0x04, + CNTRL_CH1 = 0x08, + CMDTIM = 0x52, + ARTTIM0 = 0x53, + DRWTIM0 = 0x54, + ARTTIM1 = 0x55, + DRWTIM1 = 0x56, + ARTTIM23 = 0x57, + ARTTIM23_DIS_RA2 = 0x04, + ARTTIM23_DIS_RA3 = 0x08, + ARTTIM23_INTR_CH1 = 0x10, + DRWTIM2 = 0x58, + BRST = 0x59, + DRWTIM3 = 0x5b, + BMIDECR0 = 0x70, + MRDMODE = 0x71, + MRDMODE_INTR_CH0 = 0x04, + MRDMODE_INTR_CH1 = 0x08, + BMIDESR0 = 0x72, + UDIDETCR0 = 0x73, + DTPR0 = 0x74, + BMIDECR1 = 0x78, + BMIDECSR = 0x79, + UDIDETCR1 = 0x7B, + DTPR1 = 0x7C +}; + +static int cmd648_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 r; + + /* Check cable detect bits */ + pci_read_config_byte(pdev, BMIDECSR, &r); + if (r & (1 << ap->port_no)) + return ATA_CBL_PATA80; + return ATA_CBL_PATA40; +} + +/** + * cmd64x_set_timing - set PIO and MWDMA timing + * @ap: ATA interface + * @adev: ATA device + * @mode: mode + * + * Called to do the PIO and MWDMA mode setup. + */ + +static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 mode) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_timing t; + const unsigned long T = 1000000 / 33; + const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 }; + + u8 reg; + + /* Port layout is not logical so use a table */ + const u8 arttim_port[2][2] = { + { ARTTIM0, ARTTIM1 }, + { ARTTIM23, ARTTIM23 } + }; + const u8 drwtim_port[2][2] = { + { DRWTIM0, DRWTIM1 }, + { DRWTIM2, DRWTIM3 } + }; + + int arttim = arttim_port[ap->port_no][adev->devno]; + int drwtim = drwtim_port[ap->port_no][adev->devno]; + + /* ata_timing_compute is smart and will produce timings for MWDMA + that don't violate the drives PIO capabilities. */ + if (ata_timing_compute(adev, mode, &t, T, 0) < 0) { + printk(KERN_ERR DRV_NAME ": mode computation failed.\n"); + return; + } + if (ap->port_no) { + /* Slave has shared address setup */ + struct ata_device *pair = ata_dev_pair(adev); + + if (pair) { + struct ata_timing tp; + ata_timing_compute(pair, pair->pio_mode, &tp, T, 0); + ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); + } + } + + printk(KERN_DEBUG DRV_NAME ": active %d recovery %d setup %d.\n", + t.active, t.recover, t.setup); + if (t.recover > 16) { + t.active += t.recover - 16; + t.recover = 16; + } + if (t.active > 16) + t.active = 16; + + /* Now convert the clocks into values we can actually stuff into + the chip */ + + if (t.recover == 16) + t.recover = 0; + else if (t.recover > 1) + t.recover--; + else + t.recover = 15; + + if (t.setup > 4) + t.setup = 0xC0; + else + t.setup = setup_data[t.setup]; + + t.active &= 0x0F; /* 0 = 16 */ + + /* Load setup timing */ + pci_read_config_byte(pdev, arttim, ®); + reg &= 0x3F; + reg |= t.setup; + pci_write_config_byte(pdev, arttim, reg); + + /* Load active/recovery */ + pci_write_config_byte(pdev, drwtim, (t.active << 4) | t.recover); +} + +/** + * cmd64x_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Used when configuring the devices ot set the PIO timings. All the + * actual work is done by the PIO/MWDMA setting helper + */ + +static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + cmd64x_set_timing(ap, adev, adev->pio_mode); +} + +/** + * cmd64x_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. + */ + +static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u8 udma_data[] = { + 0x30, 0x20, 0x10, 0x20, 0x10, 0x00 + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 regU, regD; + + int pciU = UDIDETCR0 + 8 * ap->port_no; + int pciD = BMIDESR0 + 8 * ap->port_no; + int shift = 2 * adev->devno; + + pci_read_config_byte(pdev, pciD, ®D); + pci_read_config_byte(pdev, pciU, ®U); + + /* DMA bits off */ + regD &= ~(0x20 << adev->devno); + /* DMA control bits */ + regU &= ~(0x30 << shift); + /* DMA timing bits */ + regU &= ~(0x05 << adev->devno); + + if (adev->dma_mode >= XFER_UDMA_0) { + /* Merge the timing value */ + regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift; + /* Merge the control bits */ + regU |= 1 << adev->devno; /* UDMA on */ + if (adev->dma_mode > XFER_UDMA_2) /* 15nS timing */ + regU |= 4 << adev->devno; + } else { + regU &= ~ (1 << adev->devno); /* UDMA off */ + cmd64x_set_timing(ap, adev, adev->dma_mode); + } + + regD |= 0x20 << adev->devno; + + pci_write_config_byte(pdev, pciU, regU); + pci_write_config_byte(pdev, pciD, regD); +} + +/** + * cmd64x_sff_irq_check - check IDE interrupt + * @ap: ATA interface + * + * Check IDE interrupt in CFR/ARTTIM23 registers. + */ + +static bool cmd64x_sff_irq_check(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int irq_mask = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0; + int irq_reg = ap->port_no ? ARTTIM23 : CFR; + u8 irq_stat; + + /* NOTE: reading the register should clear the interrupt */ + pci_read_config_byte(pdev, irq_reg, &irq_stat); + + return irq_stat & irq_mask; +} + +/** + * cmd64x_sff_irq_clear - clear IDE interrupt + * @ap: ATA interface + * + * Clear IDE interrupt in CFR/ARTTIM23 and DMA status registers. + */ + +static void cmd64x_sff_irq_clear(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int irq_reg = ap->port_no ? ARTTIM23 : CFR; + u8 irq_stat; + + ata_bmdma_irq_clear(ap); + + /* Reading the register should be enough to clear the interrupt */ + pci_read_config_byte(pdev, irq_reg, &irq_stat); +} + +/** + * cmd648_sff_irq_check - check IDE interrupt + * @ap: ATA interface + * + * Check IDE interrupt in MRDMODE register. + */ + +static bool cmd648_sff_irq_check(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long base = pci_resource_start(pdev, 4); + int irq_mask = ap->port_no ? MRDMODE_INTR_CH1 : MRDMODE_INTR_CH0; + u8 mrdmode = inb(base + 1); + + return mrdmode & irq_mask; +} + +/** + * cmd648_sff_irq_clear - clear IDE interrupt + * @ap: ATA interface + * + * Clear IDE interrupt in MRDMODE and DMA status registers. + */ + +static void cmd648_sff_irq_clear(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long base = pci_resource_start(pdev, 4); + int irq_mask = ap->port_no ? MRDMODE_INTR_CH1 : MRDMODE_INTR_CH0; + u8 mrdmode; + + ata_bmdma_irq_clear(ap); + + /* Clear this port's interrupt bit (leaving the other port alone) */ + mrdmode = inb(base + 1); + mrdmode &= ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1); + outb(mrdmode | irq_mask, base + 1); +} + +/** + * cmd646r1_bmdma_stop - DMA stop callback + * @qc: Command in progress + * + * Stub for now while investigating the r1 quirk in the old driver. + */ + +static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc) +{ + ata_bmdma_stop(qc); +} + +static struct scsi_host_template cmd64x_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static const struct ata_port_operations cmd64x_base_ops = { + .inherits = &ata_bmdma_port_ops, + .set_piomode = cmd64x_set_piomode, + .set_dmamode = cmd64x_set_dmamode, +}; + +static struct ata_port_operations cmd64x_port_ops = { + .inherits = &cmd64x_base_ops, + .sff_irq_check = cmd64x_sff_irq_check, + .sff_irq_clear = cmd64x_sff_irq_clear, + .cable_detect = ata_cable_40wire, +}; + +static struct ata_port_operations cmd646r1_port_ops = { + .inherits = &cmd64x_base_ops, + .sff_irq_check = cmd64x_sff_irq_check, + .sff_irq_clear = cmd64x_sff_irq_clear, + .bmdma_stop = cmd646r1_bmdma_stop, + .cable_detect = ata_cable_40wire, +}; + +static struct ata_port_operations cmd646r3_port_ops = { + .inherits = &cmd64x_base_ops, + .sff_irq_check = cmd648_sff_irq_check, + .sff_irq_clear = cmd648_sff_irq_clear, + .cable_detect = ata_cable_40wire, +}; + +static struct ata_port_operations cmd648_port_ops = { + .inherits = &cmd64x_base_ops, + .sff_irq_check = cmd648_sff_irq_check, + .sff_irq_clear = cmd648_sff_irq_clear, + .cable_detect = cmd648_cable_detect, +}; + +static void cmd64x_fixup(struct pci_dev *pdev) +{ + u8 mrdmode; + + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); + pci_read_config_byte(pdev, MRDMODE, &mrdmode); + mrdmode &= ~0x30; /* IRQ set up */ + mrdmode |= 0x02; /* Memory read line enable */ + pci_write_config_byte(pdev, MRDMODE, mrdmode); + + /* PPC specific fixup copied from old driver */ +#ifdef CONFIG_PPC + pci_write_config_byte(pdev, UDIDETCR0, 0xF0); +#endif +} + +static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info cmd_info[7] = { + { /* CMD 643 - no UDMA */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .port_ops = &cmd64x_port_ops + }, + { /* CMD 646 with broken UDMA */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .port_ops = &cmd64x_port_ops + }, + { /* CMD 646U with broken UDMA */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .port_ops = &cmd646r3_port_ops + }, + { /* CMD 646U2 with working UDMA */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, + .port_ops = &cmd646r3_port_ops + }, + { /* CMD 646 rev 1 */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .port_ops = &cmd646r1_port_ops + }, + { /* CMD 648 */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, + .port_ops = &cmd648_port_ops + }, + { /* CMD 649 */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &cmd648_port_ops + } + }; + const struct ata_port_info *ppi[] = { + &cmd_info[id->driver_data], + &cmd_info[id->driver_data], + NULL + }; + u8 reg; + int rc; + struct pci_dev *bridge = pdev->bus->self; + /* mobility split bridges don't report enabled ports correctly */ + int port_ok = !(bridge && bridge->vendor == + PCI_VENDOR_ID_MOBILITY_ELECTRONICS); + /* all (with exceptions below) apart from 643 have CNTRL_CH0 bit */ + int cntrl_ch0_ok = (id->driver_data != 0); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + if (id->driver_data == 0) /* 643 */ + ata_pci_bmdma_clear_simplex(pdev); + + if (pdev->device == PCI_DEVICE_ID_CMD_646) + switch (pdev->revision) { + /* UDMA works since rev 5 */ + default: + ppi[0] = &cmd_info[3]; + ppi[1] = &cmd_info[3]; + break; + /* Interrupts in MRDMODE since rev 3 */ + case 3: + case 4: + ppi[0] = &cmd_info[2]; + ppi[1] = &cmd_info[2]; + break; + /* Rev 1 with other problems? */ + case 1: + ppi[0] = &cmd_info[4]; + ppi[1] = &cmd_info[4]; + /* FALL THRU */ + /* Early revs have no CNTRL_CH0 */ + case 2: + case 0: + cntrl_ch0_ok = 0; + break; + } + + cmd64x_fixup(pdev); + + /* check for enabled ports */ + pci_read_config_byte(pdev, CNTRL, ®); + if (!port_ok) + dev_notice(&pdev->dev, "Mobility Bridge detected, ignoring CNTRL port enable/disable\n"); + if (port_ok && cntrl_ch0_ok && !(reg & CNTRL_CH0)) { + dev_notice(&pdev->dev, "Primary port is disabled\n"); + ppi[0] = &ata_dummy_port_info; + + } + if (port_ok && !(reg & CNTRL_CH1)) { + dev_notice(&pdev->dev, "Secondary port is disabled\n"); + ppi[1] = &ata_dummy_port_info; + } + + return ata_pci_bmdma_init_one(pdev, ppi, &cmd64x_sht, NULL, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int cmd64x_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + cmd64x_fixup(pdev); + + ata_host_resume(host); + return 0; +} +#endif + +static const struct pci_device_id cmd64x[] = { + { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 }, + { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_646), 1 }, + { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_648), 5 }, + { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_649), 6 }, + + { }, +}; + +static struct pci_driver cmd64x_pci_driver = { + .name = DRV_NAME, + .id_table = cmd64x, + .probe = cmd64x_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = cmd64x_reinit_one, +#endif +}; + +module_pci_driver(cmd64x_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for CMD64x series PATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cmd64x); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c new file mode 100644 index 000000000..4cb24070c --- /dev/null +++ b/drivers/ata/pata_cs5520.c @@ -0,0 +1,310 @@ +/* + * IDE tuning and bus mastering support for the CS5510/CS5520 + * chipsets + * + * The CS5510/CS5520 are slightly unusual devices. Unlike the + * typical IDE controllers they do bus mastering with the drive in + * PIO mode and smarter silicon. + * + * The practical upshot of this is that we must always tune the + * drive for the right PIO mode. We must also ignore all the blacklists + * and the drive bus mastering DMA information. Also to confuse matters + * further we can do DMA on PIO only drives. + * + * DMA on the 5510 also requires we disable_hlt() during DMA on early + * revisions. + * + * *** This driver is strictly experimental *** + * + * (c) Copyright Red Hat Inc 2002 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * Documentation: + * Not publicly available. + */ +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_cs5520" +#define DRV_VERSION "0.6.6" + +struct pio_clocks +{ + int address; + int assert; + int recovery; +}; + +static const struct pio_clocks cs5520_pio_clocks[]={ + {3, 6, 11}, + {2, 5, 6}, + {1, 4, 3}, + {1, 3, 2}, + {1, 2, 1} +}; + +/** + * cs5520_set_timings - program PIO timings + * @ap: ATA port + * @adev: ATA device + * + * Program the PIO mode timings for the controller according to the pio + * clocking table. + */ + +static void cs5520_set_timings(struct ata_port *ap, struct ata_device *adev, int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int slave = adev->devno; + + pio -= XFER_PIO_0; + + /* Channel command timing */ + pci_write_config_byte(pdev, 0x62 + ap->port_no, + (cs5520_pio_clocks[pio].recovery << 4) | + (cs5520_pio_clocks[pio].assert)); + /* FIXME: should these use address ? */ + /* Read command timing */ + pci_write_config_byte(pdev, 0x64 + 4*ap->port_no + slave, + (cs5520_pio_clocks[pio].recovery << 4) | + (cs5520_pio_clocks[pio].assert)); + /* Write command timing */ + pci_write_config_byte(pdev, 0x66 + 4*ap->port_no + slave, + (cs5520_pio_clocks[pio].recovery << 4) | + (cs5520_pio_clocks[pio].assert)); +} + +/** + * cs5520_set_piomode - program PIO timings + * @ap: ATA port + * @adev: ATA device + * + * Program the PIO mode timings for the controller according to the pio + * clocking table. + */ + +static void cs5520_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + cs5520_set_timings(ap, adev, adev->pio_mode); +} + +static struct scsi_host_template cs5520_sht = { + ATA_BMDMA_SHT(DRV_NAME), + .sg_tablesize = LIBATA_DUMB_MAX_PRD, +}; + +static struct ata_port_operations cs5520_port_ops = { + .inherits = &ata_bmdma_port_ops, + .qc_prep = ata_bmdma_dumb_qc_prep, + .cable_detect = ata_cable_40wire, + .set_piomode = cs5520_set_piomode, +}; + +static int cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const unsigned int cmd_port[] = { 0x1F0, 0x170 }; + static const unsigned int ctl_port[] = { 0x3F6, 0x376 }; + struct ata_port_info pi = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .port_ops = &cs5520_port_ops, + }; + const struct ata_port_info *ppi[2]; + u8 pcicfg; + void __iomem *iomap[5]; + struct ata_host *host; + struct ata_ioports *ioaddr; + int i, rc; + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* IDE port enable bits */ + pci_read_config_byte(pdev, 0x60, &pcicfg); + + /* Check if the ATA ports are enabled */ + if ((pcicfg & 3) == 0) + return -ENODEV; + + ppi[0] = ppi[1] = &ata_dummy_port_info; + if (pcicfg & 1) + ppi[0] = π + if (pcicfg & 2) + ppi[1] = π + + if ((pcicfg & 0x40) == 0) { + dev_warn(&pdev->dev, "DMA mode disabled. Enabling.\n"); + pci_write_config_byte(pdev, 0x60, pcicfg | 0x40); + } + + pi.mwdma_mask = id->driver_data; + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2); + if (!host) + return -ENOMEM; + + /* Perform set up for DMA */ + if (pci_enable_device_io(pdev)) { + printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n"); + return -ENODEV; + } + + if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) { + printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n"); + return -ENODEV; + } + if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) { + printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n"); + return -ENODEV; + } + + /* Map IO ports and initialize host accordingly */ + iomap[0] = devm_ioport_map(&pdev->dev, cmd_port[0], 8); + iomap[1] = devm_ioport_map(&pdev->dev, ctl_port[0], 1); + iomap[2] = devm_ioport_map(&pdev->dev, cmd_port[1], 8); + iomap[3] = devm_ioport_map(&pdev->dev, ctl_port[1], 1); + iomap[4] = pcim_iomap(pdev, 2, 0); + + if (!iomap[0] || !iomap[1] || !iomap[2] || !iomap[3] || !iomap[4]) + return -ENOMEM; + + ioaddr = &host->ports[0]->ioaddr; + ioaddr->cmd_addr = iomap[0]; + ioaddr->ctl_addr = iomap[1]; + ioaddr->altstatus_addr = iomap[1]; + ioaddr->bmdma_addr = iomap[4]; + ata_sff_std_ports(ioaddr); + + ata_port_desc(host->ports[0], + "cmd 0x%x ctl 0x%x", cmd_port[0], ctl_port[0]); + ata_port_pbar_desc(host->ports[0], 4, 0, "bmdma"); + + ioaddr = &host->ports[1]->ioaddr; + ioaddr->cmd_addr = iomap[2]; + ioaddr->ctl_addr = iomap[3]; + ioaddr->altstatus_addr = iomap[3]; + ioaddr->bmdma_addr = iomap[4] + 8; + ata_sff_std_ports(ioaddr); + + ata_port_desc(host->ports[1], + "cmd 0x%x ctl 0x%x", cmd_port[1], ctl_port[1]); + ata_port_pbar_desc(host->ports[1], 4, 8, "bmdma"); + + /* activate the host */ + pci_set_master(pdev); + rc = ata_host_start(host); + if (rc) + return rc; + + for (i = 0; i < 2; i++) { + static const int irq[] = { 14, 15 }; + struct ata_port *ap = host->ports[i]; + + if (ata_port_is_dummy(ap)) + continue; + + rc = devm_request_irq(&pdev->dev, irq[ap->port_no], + ata_bmdma_interrupt, 0, DRV_NAME, host); + if (rc) + return rc; + + ata_port_desc(ap, "irq %d", irq[i]); + } + + return ata_host_register(host, &cs5520_sht); +} + +#ifdef CONFIG_PM_SLEEP +/** + * cs5520_reinit_one - device resume + * @pdev: PCI device + * + * Do any reconfiguration work needed by a resume from RAM. We need + * to restore DMA mode support on BIOSen which disabled it + */ + +static int cs5520_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + u8 pcicfg; + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + pci_read_config_byte(pdev, 0x60, &pcicfg); + if ((pcicfg & 0x40) == 0) + pci_write_config_byte(pdev, 0x60, pcicfg | 0x40); + + ata_host_resume(host); + return 0; +} + +/** + * cs5520_pci_device_suspend - device suspend + * @pdev: PCI device + * + * We have to cut and waste bits from the standard method because + * the 5520 is a bit odd and not just a pure ATA device. As a result + * we must not disable it. The needed code is short and this avoids + * chip specific mess in the core code. + */ + +static int cs5520_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc = 0; + + rc = ata_host_suspend(host, mesg); + if (rc) + return rc; + + pci_save_state(pdev); + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +/* For now keep DMA off. We can set it for all but A rev CS5510 once the + core ATA code can handle it */ + +static const struct pci_device_id pata_cs5520[] = { + { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), }, + { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), }, + + { }, +}; + +static struct pci_driver cs5520_pci_driver = { + .name = DRV_NAME, + .id_table = pata_cs5520, + .probe = cs5520_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = cs5520_pci_device_suspend, + .resume = cs5520_reinit_one, +#endif +}; + +module_pci_driver(cs5520_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Cyrix CS5510/5520"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, pata_cs5520); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c new file mode 100644 index 000000000..f9ca72e93 --- /dev/null +++ b/drivers/ata/pata_cs5530.c @@ -0,0 +1,369 @@ +/* + * pata-cs5530.c - CS5530 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * + * based upon cs5530.c by Mark Lord. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Loosely based on the piix & svwks drivers. + * + * Documentation: + * Available from AMD web site. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_cs5530" +#define DRV_VERSION "0.7.4" + +static void __iomem *cs5530_port_base(struct ata_port *ap) +{ + unsigned long bmdma = (unsigned long)ap->ioaddr.bmdma_addr; + + return (void __iomem *)((bmdma & ~0x0F) + 0x20 + 0x10 * ap->port_no); +} + +/** + * cs5530_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Set our PIO requirements. This is fairly simple on the CS5530 + * chips. + */ + +static void cs5530_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const unsigned int cs5530_pio_timings[2][5] = { + {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, + {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010} + }; + void __iomem *base = cs5530_port_base(ap); + u32 tuning; + int format; + + /* Find out which table to use */ + tuning = ioread32(base + 0x04); + format = (tuning & 0x80000000UL) ? 1 : 0; + + /* Now load the right timing register */ + if (adev->devno) + base += 0x08; + + iowrite32(cs5530_pio_timings[format][adev->pio_mode - XFER_PIO_0], base); +} + +/** + * cs5530_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * We cannot mix MWDMA and UDMA without reloading timings each switch + * master to slave. We track the last DMA setup in order to minimise + * reloads. + */ + +static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + void __iomem *base = cs5530_port_base(ap); + u32 tuning, timing = 0; + u8 reg; + + /* Find out which table to use */ + tuning = ioread32(base + 0x04); + + switch(adev->dma_mode) { + case XFER_UDMA_0: + timing = 0x00921250;break; + case XFER_UDMA_1: + timing = 0x00911140;break; + case XFER_UDMA_2: + timing = 0x00911030;break; + case XFER_MW_DMA_0: + timing = 0x00077771;break; + case XFER_MW_DMA_1: + timing = 0x00012121;break; + case XFER_MW_DMA_2: + timing = 0x00002020;break; + default: + BUG(); + } + /* Merge in the PIO format bit */ + timing |= (tuning & 0x80000000UL); + if (adev->devno == 0) /* Master */ + iowrite32(timing, base + 0x04); + else { + if (timing & 0x00100000) + tuning |= 0x00100000; /* UDMA for both */ + else + tuning &= ~0x00100000; /* MWDMA for both */ + iowrite32(tuning, base + 0x04); + iowrite32(timing, base + 0x0C); + } + + /* Set the DMA capable bit in the BMDMA area */ + reg = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + reg |= (1 << (5 + adev->devno)); + iowrite8(reg, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + + /* Remember the last DMA setup we did */ + + ap->private_data = adev; +} + +/** + * cs5530_qc_issue - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * necessary. Specifically we have a problem that there is only + * one MWDMA/UDMA bit. + */ + +static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct ata_device *prev = ap->private_data; + + /* See if the DMA settings could be wrong */ + if (ata_dma_enabled(adev) && adev != prev && prev != NULL) { + /* Maybe, but do the channels match MWDMA/UDMA ? */ + if ((ata_using_udma(adev) && !ata_using_udma(prev)) || + (ata_using_udma(prev) && !ata_using_udma(adev))) + /* Switch the mode bits */ + cs5530_set_dmamode(ap, adev); + } + + return ata_bmdma_qc_issue(qc); +} + +static struct scsi_host_template cs5530_sht = { + ATA_BMDMA_SHT(DRV_NAME), + .sg_tablesize = LIBATA_DUMB_MAX_PRD, +}; + +static struct ata_port_operations cs5530_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .qc_prep = ata_bmdma_dumb_qc_prep, + .qc_issue = cs5530_qc_issue, + + .cable_detect = ata_cable_40wire, + .set_piomode = cs5530_set_piomode, + .set_dmamode = cs5530_set_dmamode, +}; + +static const struct dmi_system_id palmax_dmi_table[] = { + { + .ident = "Palmax PD1100", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Cyrix"), + DMI_MATCH(DMI_PRODUCT_NAME, "Caddis"), + }, + }, + { } +}; + +static int cs5530_is_palmax(void) +{ + if (dmi_check_system(palmax_dmi_table)) { + printk(KERN_INFO "Palmax PD1100: Disabling DMA on docking port.\n"); + return 1; + } + return 0; +} + + +/** + * cs5530_init_chip - Chipset init + * + * Perform the chip initialisation work that is shared between both + * setup and resume paths + */ + +static int cs5530_init_chip(void) +{ + struct pci_dev *master_0 = NULL, *cs5530_0 = NULL, *dev = NULL; + + while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) { + switch (dev->device) { + case PCI_DEVICE_ID_CYRIX_PCI_MASTER: + master_0 = pci_dev_get(dev); + break; + case PCI_DEVICE_ID_CYRIX_5530_LEGACY: + cs5530_0 = pci_dev_get(dev); + break; + } + } + if (!master_0) { + printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n"); + goto fail_put; + } + if (!cs5530_0) { + printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n"); + goto fail_put; + } + + pci_set_master(cs5530_0); + pci_try_set_mwi(cs5530_0); + + /* + * Set PCI CacheLineSize to 16-bytes: + * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530 + * + * Note: This value is constant because the 5530 is only a Geode companion + */ + + pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04); + + /* + * Disable trapping of UDMA register accesses (Win98 hack): + * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530 + */ + + pci_write_config_word(cs5530_0, 0xd0, 0x5006); + + /* + * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus: + * The other settings are what is necessary to get the register + * into a sane state for IDE DMA operation. + */ + + pci_write_config_byte(master_0, 0x40, 0x1e); + + /* + * Set max PCI burst size (16-bytes seems to work best): + * 16bytes: set bit-1 at 0x41 (reg value of 0x16) + * all others: clear bit-1 at 0x41, and do: + * 128bytes: OR 0x00 at 0x41 + * 256bytes: OR 0x04 at 0x41 + * 512bytes: OR 0x08 at 0x41 + * 1024bytes: OR 0x0c at 0x41 + */ + + pci_write_config_byte(master_0, 0x41, 0x14); + + /* + * These settings are necessary to get the chip + * into a sane state for IDE DMA operation. + */ + + pci_write_config_byte(master_0, 0x42, 0x00); + pci_write_config_byte(master_0, 0x43, 0xc1); + + pci_dev_put(master_0); + pci_dev_put(cs5530_0); + return 0; +fail_put: + pci_dev_put(master_0); + pci_dev_put(cs5530_0); + return -ENODEV; +} + +/** + * cs5530_init_one - Initialise a CS5530 + * @dev: PCI device + * @id: Entry in match table + * + * Install a driver for the newly found CS5530 companion chip. Most of + * this is just housekeeping. We have to set the chip up correctly and + * turn off various bits of emulation magic. + */ + +static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, + .port_ops = &cs5530_port_ops + }; + /* The docking connector doesn't do UDMA, and it seems not MWDMA */ + static const struct ata_port_info info_palmax_secondary = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .port_ops = &cs5530_port_ops + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + int rc; + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* Chip initialisation */ + if (cs5530_init_chip()) + return -ENODEV; + + if (cs5530_is_palmax()) + ppi[1] = &info_palmax_secondary; + + /* Now kick off ATA set up */ + return ata_pci_bmdma_init_one(pdev, ppi, &cs5530_sht, NULL, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int cs5530_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + /* If we fail on resume we are doomed */ + if (cs5530_init_chip()) + return -EIO; + + ata_host_resume(host); + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static const struct pci_device_id cs5530[] = { + { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), }, + + { }, +}; + +static struct pci_driver cs5530_pci_driver = { + .name = DRV_NAME, + .id_table = cs5530, + .probe = cs5530_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = cs5530_reinit_one, +#endif +}; + +module_pci_driver(cs5530_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the Cyrix/NS/AMD 5530"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cs5530); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c new file mode 100644 index 000000000..97584e845 --- /dev/null +++ b/drivers/ata/pata_cs5535.c @@ -0,0 +1,215 @@ +/* + * pata-cs5535.c - CS5535 PATA for new ATA layer + * (C) 2005-2006 Red Hat Inc + * Alan Cox + * + * based upon cs5535.c from AMD as cleaned up and + * made readable and Linux style by Wolfgang Zuleger + * and Alexander Kiausch + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Loosely based on the piix & svwks drivers. + * + * Documentation: + * Available from AMD web site. + * TODO + * Review errata to see if serializing is necessary + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_cs5535" +#define DRV_VERSION "0.2.12" + +/* + * The Geode (Aka Athlon GX now) uses an internal MSR based + * bus system for control. Demented but there you go. + */ + +#define MSR_ATAC_BASE 0x51300000 +#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0) +#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01) +#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02) +#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03) +#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04) +#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05) +#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08) +#define ATAC_RESET (MSR_ATAC_BASE+0x10) +#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20) +#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21) +#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22) +#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23) +#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24) + +#define ATAC_BM0_CMD_PRIM 0x00 +#define ATAC_BM0_STS_PRIM 0x02 +#define ATAC_BM0_PRD 0x04 + +#define CS5535_CABLE_DETECT 0x48 + +/** + * cs5535_cable_detect - detect cable type + * @ap: Port to detect on + * + * Perform cable detection for ATA66 capable cable. Return a libata + * cable type. + */ + +static int cs5535_cable_detect(struct ata_port *ap) +{ + u8 cable; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable); + if (cable & 1) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + +/** + * cs5535_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Set our PIO requirements. The CS5535 is pretty clean about all this + */ + +static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const u16 pio_timings[5] = { + 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 + }; + static const u16 pio_cmd_timings[5] = { + 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 + }; + u32 reg, dummy; + struct ata_device *pair = ata_dev_pair(adev); + + int mode = adev->pio_mode - XFER_PIO_0; + int cmdmode = mode; + + /* Command timing has to be for the lowest of the pair of devices */ + if (pair) { + int pairmode = pair->pio_mode - XFER_PIO_0; + cmdmode = min(mode, pairmode); + /* Write the other drive timing register if it changed */ + if (cmdmode < pairmode) + wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno, + pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode], 0); + } + /* Write the drive timing register */ + wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno, + pio_cmd_timings[cmdmode] << 16 | pio_timings[mode], 0); + + /* Set the PIO "format 1" bit in the DMA timing register */ + rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy); + wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL, 0); +} + +/** + * cs5535_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + */ + +static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u32 udma_timings[5] = { + 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 + }; + static const u32 mwdma_timings[3] = { + 0x7F0FFFF3, 0x7F035352, 0x7F024241 + }; + u32 reg, dummy; + int mode = adev->dma_mode; + + rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy); + reg &= 0x80000000UL; + if (mode >= XFER_UDMA_0) + reg |= udma_timings[mode - XFER_UDMA_0]; + else + reg |= mwdma_timings[mode - XFER_MW_DMA_0]; + wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0); +} + +static struct scsi_host_template cs5535_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations cs5535_port_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = cs5535_cable_detect, + .set_piomode = cs5535_set_piomode, + .set_dmamode = cs5535_set_dmamode, +}; + +/** + * cs5535_init_one - Initialise a CS5530 + * @dev: PCI device + * @id: Entry in match table + * + * Install a driver for the newly found CS5530 companion chip. Most of + * this is just housekeeping. We have to set the chip up correctly and + * turn off various bits of emulation magic. + */ + +static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, + .port_ops = &cs5535_port_ops + }; + const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; + + return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0); +} + +static const struct pci_device_id cs5535[] = { + { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), }, + + { }, +}; + +static struct pci_driver cs5535_pci_driver = { + .name = DRV_NAME, + .id_table = cs5535, + .probe = cs5535_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(cs5535_pci_driver); + +MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch"); +MODULE_DESCRIPTION("low-level driver for the NS/AMD 5535"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cs5535); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c new file mode 100644 index 000000000..6c15a554e --- /dev/null +++ b/drivers/ata/pata_cs5536.c @@ -0,0 +1,312 @@ +/* + * pata_cs5536.c - CS5536 PATA for new ATA layer + * (C) 2007 Martin K. Petersen + * (C) 2011 Bartlomiej Zolnierkiewicz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Documentation: + * Available from AMD web site. + * + * The IDE timing registers for the CS5536 live in the Geode Machine + * Specific Register file and not PCI config space. Most BIOSes + * virtualize the PCI registers so the chip looks like a standard IDE + * controller. Unfortunately not all implementations get this right. + * In particular some have problems with unaligned accesses to the + * virtualized PCI registers. This driver always does full dword + * writes to work around the issue. Also, in case of a bad BIOS this + * driver can be loaded with the "msr=1" parameter which forces using + * the Machine Specific Registers to configure the device. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_X86_32 +#include +static int use_msr; +module_param_named(msr, use_msr, int, 0644); +MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)"); +#else +#undef rdmsr /* avoid accidental MSR usage on, e.g. x86-64 */ +#undef wrmsr +#define rdmsr(x, y, z) do { } while (0) +#define wrmsr(x, y, z) do { } while (0) +#define use_msr 0 +#endif + +#define DRV_NAME "pata_cs5536" +#define DRV_VERSION "0.0.8" + +enum { + MSR_IDE_CFG = 0x51300010, + PCI_IDE_CFG = 0x40, + + CFG = 0, + DTC = 2, + CAST = 3, + ETC = 4, + + IDE_CFG_CHANEN = (1 << 1), + IDE_CFG_CABLE = (1 << 17) | (1 << 16), + + IDE_D0_SHIFT = 24, + IDE_D1_SHIFT = 16, + IDE_DRV_MASK = 0xff, + + IDE_CAST_D0_SHIFT = 6, + IDE_CAST_D1_SHIFT = 4, + IDE_CAST_DRV_MASK = 0x3, + IDE_CAST_CMD_MASK = 0xff, + IDE_CAST_CMD_SHIFT = 24, + + IDE_ETC_UDMA_MASK = 0xc0, +}; + +/* Some Bachmann OT200 devices have a non working UDMA support due a + * missing resistor. + */ +static const struct dmi_system_id udma_quirk_dmi_table[] = { + { + .ident = "Bachmann electronic OT200", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Bachmann electronic"), + DMI_MATCH(DMI_PRODUCT_NAME, "OT200"), + DMI_MATCH(DMI_PRODUCT_VERSION, "1") + }, + }, + { } +}; + +static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val) +{ + if (unlikely(use_msr)) { + u32 dummy __maybe_unused; + + rdmsr(MSR_IDE_CFG + reg, *val, dummy); + return 0; + } + + return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val); +} + +static int cs5536_write(struct pci_dev *pdev, int reg, int val) +{ + if (unlikely(use_msr)) { + wrmsr(MSR_IDE_CFG + reg, val, 0); + return 0; + } + + return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val); +} + +static void cs5536_program_dtc(struct ata_device *adev, u8 tim) +{ + struct pci_dev *pdev = to_pci_dev(adev->link->ap->host->dev); + int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT; + u32 dtc; + + cs5536_read(pdev, DTC, &dtc); + dtc &= ~(IDE_DRV_MASK << dshift); + dtc |= tim << dshift; + cs5536_write(pdev, DTC, dtc); +} + +/** + * cs5536_cable_detect - detect cable type + * @ap: Port to detect on + * + * Perform cable detection for ATA66 capable cable. + * + * Returns a cable type. + */ + +static int cs5536_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 cfg; + + cs5536_read(pdev, CFG, &cfg); + + if (cfg & IDE_CFG_CABLE) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + +/** + * cs5536_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + */ + +static void cs5536_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const u8 drv_timings[5] = { + 0x98, 0x55, 0x32, 0x21, 0x20, + }; + + static const u8 addr_timings[5] = { + 0x2, 0x1, 0x0, 0x0, 0x0, + }; + + static const u8 cmd_timings[5] = { + 0x99, 0x92, 0x90, 0x22, 0x20, + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_device *pair = ata_dev_pair(adev); + int mode = adev->pio_mode - XFER_PIO_0; + int cmdmode = mode; + int cshift = adev->devno ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT; + u32 cast; + + if (pair) + cmdmode = min(mode, pair->pio_mode - XFER_PIO_0); + + cs5536_program_dtc(adev, drv_timings[mode]); + + cs5536_read(pdev, CAST, &cast); + + cast &= ~(IDE_CAST_DRV_MASK << cshift); + cast |= addr_timings[mode] << cshift; + + cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT); + cast |= cmd_timings[cmdmode] << IDE_CAST_CMD_SHIFT; + + cs5536_write(pdev, CAST, cast); +} + +/** + * cs5536_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + */ + +static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u8 udma_timings[6] = { + 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6, + }; + + static const u8 mwdma_timings[3] = { + 0x67, 0x21, 0x20, + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 etc; + int mode = adev->dma_mode; + int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT; + + cs5536_read(pdev, ETC, &etc); + + if (mode >= XFER_UDMA_0) { + etc &= ~(IDE_DRV_MASK << dshift); + etc |= udma_timings[mode - XFER_UDMA_0] << dshift; + } else { /* MWDMA */ + etc &= ~(IDE_ETC_UDMA_MASK << dshift); + cs5536_program_dtc(adev, mwdma_timings[mode - XFER_MW_DMA_0]); + } + + cs5536_write(pdev, ETC, etc); +} + +static struct scsi_host_template cs5536_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations cs5536_port_ops = { + .inherits = &ata_bmdma32_port_ops, + .cable_detect = cs5536_cable_detect, + .set_piomode = cs5536_set_piomode, + .set_dmamode = cs5536_set_dmamode, +}; + +/** + * cs5536_init_one + * @dev: PCI device + * @id: Entry in match table + * + */ + +static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &cs5536_port_ops, + }; + + static const struct ata_port_info no_udma_info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .port_ops = &cs5536_port_ops, + }; + + + const struct ata_port_info *ppi[2]; + u32 cfg; + + if (dmi_check_system(udma_quirk_dmi_table)) + ppi[0] = &no_udma_info; + else + ppi[0] = &info; + + ppi[1] = &ata_dummy_port_info; + + if (use_msr) + printk(KERN_ERR DRV_NAME ": Using MSR regs instead of PCI\n"); + + cs5536_read(dev, CFG, &cfg); + + if ((cfg & IDE_CFG_CHANEN) == 0) { + printk(KERN_ERR DRV_NAME ": disabled by BIOS\n"); + return -ENODEV; + } + + return ata_pci_bmdma_init_one(dev, ppi, &cs5536_sht, NULL, 0); +} + +static const struct pci_device_id cs5536[] = { + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), }, + { }, +}; + +static struct pci_driver cs5536_pci_driver = { + .name = DRV_NAME, + .id_table = cs5536, + .probe = cs5536_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(cs5536_pci_driver); + +MODULE_AUTHOR("Martin K. Petersen"); +MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cs5536); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c new file mode 100644 index 000000000..793018460 --- /dev/null +++ b/drivers/ata/pata_cypress.c @@ -0,0 +1,166 @@ +/* + * pata_cypress.c - Cypress PATA for new ATA layer + * (C) 2006 Red Hat Inc + * Alan Cox + * + * Based heavily on + * linux/drivers/ide/pci/cy82c693.c Version 0.40 Sep. 10, 2002 + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_cypress" +#define DRV_VERSION "0.1.5" + +/* here are the offset definitions for the registers */ + +enum { + CY82_IDE_CMDREG = 0x04, + CY82_IDE_ADDRSETUP = 0x48, + CY82_IDE_MASTER_IOR = 0x4C, + CY82_IDE_MASTER_IOW = 0x4D, + CY82_IDE_SLAVE_IOR = 0x4E, + CY82_IDE_SLAVE_IOW = 0x4F, + CY82_IDE_MASTER_8BIT = 0x50, + CY82_IDE_SLAVE_8BIT = 0x51, + + CY82_INDEX_PORT = 0x22, + CY82_DATA_PORT = 0x23, + + CY82_INDEX_CTRLREG1 = 0x01, + CY82_INDEX_CHANNEL0 = 0x30, + CY82_INDEX_CHANNEL1 = 0x31, + CY82_INDEX_TIMEOUT = 0x32 +}; + +/** + * cy82c693_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. + */ + +static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_timing t; + const unsigned long T = 1000000 / 33; + short time_16, time_8; + u32 addr; + + if (ata_timing_compute(adev, adev->pio_mode, &t, T, 1) < 0) { + printk(KERN_ERR DRV_NAME ": mome computation failed.\n"); + return; + } + + time_16 = clamp_val(t.recover - 1, 0, 15) | + (clamp_val(t.active - 1, 0, 15) << 4); + time_8 = clamp_val(t.act8b - 1, 0, 15) | + (clamp_val(t.rec8b - 1, 0, 15) << 4); + + if (adev->devno == 0) { + pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); + + addr &= ~0x0F; /* Mask bits */ + addr |= clamp_val(t.setup - 1, 0, 15); + + pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); + pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16); + pci_write_config_byte(pdev, CY82_IDE_MASTER_IOW, time_16); + pci_write_config_byte(pdev, CY82_IDE_MASTER_8BIT, time_8); + } else { + pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); + + addr &= ~0xF0; /* Mask bits */ + addr |= (clamp_val(t.setup - 1, 0, 15) << 4); + + pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); + pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16); + pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOW, time_16); + pci_write_config_byte(pdev, CY82_IDE_SLAVE_8BIT, time_8); + } +} + +/** + * cy82c693_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. + */ + +static void cy82c693_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + int reg = CY82_INDEX_CHANNEL0 + ap->port_no; + + /* Be afraid, be very afraid. Magic registers in low I/O space */ + outb(reg, 0x22); + outb(adev->dma_mode - XFER_MW_DMA_0, 0x23); + + /* 0x50 gives the best behaviour on the Alpha's using this chip */ + outb(CY82_INDEX_TIMEOUT, 0x22); + outb(0x50, 0x23); +} + +static struct scsi_host_template cy82c693_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations cy82c693_port_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = ata_cable_40wire, + .set_piomode = cy82c693_set_piomode, + .set_dmamode = cy82c693_set_dmamode, +}; + +static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .port_ops = &cy82c693_port_ops + }; + const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; + + /* Devfn 1 is the ATA primary. The secondary is magic and on devfn2. + For the moment we don't handle the secondary. FIXME */ + + if (PCI_FUNC(pdev->devfn) != 1) + return -ENODEV; + + return ata_pci_bmdma_init_one(pdev, ppi, &cy82c693_sht, NULL, 0); +} + +static const struct pci_device_id cy82c693[] = { + { PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), }, + + { }, +}; + +static struct pci_driver cy82c693_pci_driver = { + .name = DRV_NAME, + .id_table = cy82c693, + .probe = cy82c693_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(cy82c693_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the CY82C693 PATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cy82c693); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c new file mode 100644 index 000000000..4a57a6f03 --- /dev/null +++ b/drivers/ata/pata_efar.c @@ -0,0 +1,303 @@ +/* + * pata_efar.c - EFAR PIIX clone controller driver + * + * (C) 2005 Red Hat + * (C) 2009-2010 Bartlomiej Zolnierkiewicz + * + * Some parts based on ata_piix.c by Jeff Garzik and others. + * + * The EFAR is a PIIX4 clone with UDMA66 support. Unlike the later + * Intel ICH controllers the EFAR widened the UDMA mode register bits + * and doesn't require the funky clock selection. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_efar" +#define DRV_VERSION "0.4.5" + +/** + * efar_pre_reset - Enable bits + * @link: ATA link + * @deadline: deadline jiffies for the operation + * + * Perform cable detection for the EFAR ATA interface. This is + * different to the PIIX arrangement + */ + +static int efar_pre_reset(struct ata_link *link, unsigned long deadline) +{ + static const struct pci_bits efar_enable_bits[] = { + { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ + { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ + }; + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no])) + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + +/** + * efar_cable_detect - check for 40/80 pin + * @ap: Port + * + * Perform cable detection for the EFAR ATA interface. This is + * different to the PIIX arrangement + */ + +static int efar_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 tmp; + + pci_read_config_byte(pdev, 0x47, &tmp); + if (tmp & (2 >> ap->port_no)) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + +static DEFINE_SPINLOCK(efar_lock); + +/** + * efar_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned int master_port = ap->port_no ? 0x42 : 0x40; + unsigned long flags; + u16 master_data; + u8 udma_enable; + int control = 0; + + /* + * See Intel Document 298600-004 for the timing programing rules + * for PIIX/ICH. The EFAR is a clone so very similar + */ + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + if (pio > 1) + control |= 1; /* TIME */ + if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */ + control |= 2; /* IE */ + /* Intel specifies that the prefetch/posting is for disk only */ + if (adev->class == ATA_DEV_ATA) + control |= 4; /* PPE */ + + spin_lock_irqsave(&efar_lock, flags); + + pci_read_config_word(dev, master_port, &master_data); + + /* Set PPE, IE, and TIME as appropriate */ + if (adev->devno == 0) { + master_data &= 0xCCF0; + master_data |= control; + master_data |= (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } else { + int shift = 4 * ap->port_no; + u8 slave_data; + + master_data &= 0xFF0F; + master_data |= (control << 4); + + /* Slave timing in separate register */ + pci_read_config_byte(dev, 0x44, &slave_data); + slave_data &= ap->port_no ? 0x0F : 0xF0; + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << shift; + pci_write_config_byte(dev, 0x44, slave_data); + } + + master_data |= 0x4000; /* Ensure SITRE is set */ + pci_write_config_word(dev, master_port, master_data); + + pci_read_config_byte(dev, 0x48, &udma_enable); + udma_enable &= ~(1 << (2 * ap->port_no + adev->devno)); + pci_write_config_byte(dev, 0x48, udma_enable); + spin_unlock_irqrestore(&efar_lock, flags); +} + +/** + * efar_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void efar_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u8 master_port = ap->port_no ? 0x42 : 0x40; + u16 master_data; + u8 speed = adev->dma_mode; + int devid = adev->devno + 2 * ap->port_no; + unsigned long flags; + u8 udma_enable; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + spin_lock_irqsave(&efar_lock, flags); + + pci_read_config_word(dev, master_port, &master_data); + pci_read_config_byte(dev, 0x48, &udma_enable); + + if (speed >= XFER_UDMA_0) { + unsigned int udma = adev->dma_mode - XFER_UDMA_0; + u16 udma_timing; + + udma_enable |= (1 << devid); + + /* Load the UDMA mode number */ + pci_read_config_word(dev, 0x4A, &udma_timing); + udma_timing &= ~(7 << (4 * devid)); + udma_timing |= udma << (4 * devid); + pci_write_config_word(dev, 0x4A, udma_timing); + } else { + /* + * MWDMA is driven by the PIO timings. We must also enable + * IORDY unconditionally along with TIME1. PPE has already + * been set when the PIO timing was set. + */ + unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; + unsigned int control; + u8 slave_data; + const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + + control = 3; /* IORDY|TIME1 */ + + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO into PIO0 */ + + if (adev->pio_mode < needed_pio[mwdma]) + /* Enable DMA timing only */ + control |= 8; /* PIO cycles in PIO0 */ + + if (adev->devno) { /* Slave */ + master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */ + master_data |= control << 4; + pci_read_config_byte(dev, 0x44, &slave_data); + slave_data &= ap->port_no ? 0x0F : 0xF0; + /* Load the matching timing */ + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); + pci_write_config_byte(dev, 0x44, slave_data); + } else { /* Master */ + master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY + and master timing bits */ + master_data |= control; + master_data |= + (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } + udma_enable &= ~(1 << devid); + pci_write_config_word(dev, master_port, master_data); + } + pci_write_config_byte(dev, 0x48, udma_enable); + spin_unlock_irqrestore(&efar_lock, flags); +} + +static struct scsi_host_template efar_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations efar_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = efar_cable_detect, + .set_piomode = efar_set_piomode, + .set_dmamode = efar_set_dmamode, + .prereset = efar_pre_reset, +}; + + +/** + * efar_init_one - Register EFAR ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in efar_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .udma_mask = ATA_UDMA4, + .port_ops = &efar_ops, + }; + const struct ata_port_info *ppi[] = { &info, &info }; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + return ata_pci_bmdma_init_one(pdev, ppi, &efar_sht, NULL, + ATA_HOST_PARALLEL_SCAN); +} + +static const struct pci_device_id efar_pci_tbl[] = { + { PCI_VDEVICE(EFAR, 0x9130), }, + + { } /* terminate list */ +}; + +static struct pci_driver efar_pci_driver = { + .name = DRV_NAME, + .id_table = efar_pci_tbl, + .probe = efar_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(efar_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for EFAR PIIX clones"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, efar_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c new file mode 100644 index 000000000..bd6b089c6 --- /dev/null +++ b/drivers/ata/pata_ep93xx.c @@ -0,0 +1,1036 @@ +/* + * EP93XX PATA controller driver. + * + * Copyright (c) 2012, Metasoft s.c. + * Rafal Prylowski + * + * Based on pata_scc.c, pata_icside.c and on earlier version of EP93XX + * PATA driver by Lennert Buytenhek and Alessandro Zummo. + * Read/Write timings, resource management and other improvements + * from driver by Joao Ramos and Bartlomiej Zolnierkiewicz. + * DMA engine support based on spi-ep93xx.c by Mika Westerberg. + * + * Original copyrights: + * + * Support for Cirrus Logic's EP93xx (EP9312, EP9315) CPUs + * PATA host controller driver. + * + * Copyright (c) 2009, Bartlomiej Zolnierkiewicz + * + * Heavily based on the ep93xx-ide.c driver: + * + * Copyright (c) 2009, Joao Ramos + * INESC Inovacao (INOV) + * + * EP93XX PATA controller driver. + * Copyright (C) 2007 Lennert Buytenhek + * + * An ATA driver for the Cirrus Logic EP93xx PATA controller. + * + * Based on an earlier version by Alessandro Zummo, which is: + * Copyright (C) 2006 Tower Technologies + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DRV_NAME "ep93xx-ide" +#define DRV_VERSION "1.0" + +enum { + /* IDE Control Register */ + IDECTRL = 0x00, + IDECTRL_CS0N = (1 << 0), + IDECTRL_CS1N = (1 << 1), + IDECTRL_DIORN = (1 << 5), + IDECTRL_DIOWN = (1 << 6), + IDECTRL_INTRQ = (1 << 9), + IDECTRL_IORDY = (1 << 10), + /* + * the device IDE register to be accessed is selected through + * IDECTRL register's specific bitfields 'DA', 'CS1N' and 'CS0N': + * b4 b3 b2 b1 b0 + * A2 A1 A0 CS1N CS0N + * the values filled in this structure allows the value to be directly + * ORed to the IDECTRL register, hence giving directly the A[2:0] and + * CS1N/CS0N values for each IDE register. + * The values correspond to the transformation: + * ((real IDE address) << 2) | CS1N value << 1 | CS0N value + */ + IDECTRL_ADDR_CMD = 0 + 2, /* CS1 */ + IDECTRL_ADDR_DATA = (ATA_REG_DATA << 2) + 2, + IDECTRL_ADDR_ERROR = (ATA_REG_ERR << 2) + 2, + IDECTRL_ADDR_FEATURE = (ATA_REG_FEATURE << 2) + 2, + IDECTRL_ADDR_NSECT = (ATA_REG_NSECT << 2) + 2, + IDECTRL_ADDR_LBAL = (ATA_REG_LBAL << 2) + 2, + IDECTRL_ADDR_LBAM = (ATA_REG_LBAM << 2) + 2, + IDECTRL_ADDR_LBAH = (ATA_REG_LBAH << 2) + 2, + IDECTRL_ADDR_DEVICE = (ATA_REG_DEVICE << 2) + 2, + IDECTRL_ADDR_STATUS = (ATA_REG_STATUS << 2) + 2, + IDECTRL_ADDR_COMMAND = (ATA_REG_CMD << 2) + 2, + IDECTRL_ADDR_ALTSTATUS = (0x06 << 2) + 1, /* CS0 */ + IDECTRL_ADDR_CTL = (0x06 << 2) + 1, /* CS0 */ + + /* IDE Configuration Register */ + IDECFG = 0x04, + IDECFG_IDEEN = (1 << 0), + IDECFG_PIO = (1 << 1), + IDECFG_MDMA = (1 << 2), + IDECFG_UDMA = (1 << 3), + IDECFG_MODE_SHIFT = 4, + IDECFG_MODE_MASK = (0xf << 4), + IDECFG_WST_SHIFT = 8, + IDECFG_WST_MASK = (0x3 << 8), + + /* MDMA Operation Register */ + IDEMDMAOP = 0x08, + + /* UDMA Operation Register */ + IDEUDMAOP = 0x0c, + IDEUDMAOP_UEN = (1 << 0), + IDEUDMAOP_RWOP = (1 << 1), + + /* PIO/MDMA/UDMA Data Registers */ + IDEDATAOUT = 0x10, + IDEDATAIN = 0x14, + IDEMDMADATAOUT = 0x18, + IDEMDMADATAIN = 0x1c, + IDEUDMADATAOUT = 0x20, + IDEUDMADATAIN = 0x24, + + /* UDMA Status Register */ + IDEUDMASTS = 0x28, + IDEUDMASTS_DMAIDE = (1 << 16), + IDEUDMASTS_INTIDE = (1 << 17), + IDEUDMASTS_SBUSY = (1 << 18), + IDEUDMASTS_NDO = (1 << 24), + IDEUDMASTS_NDI = (1 << 25), + IDEUDMASTS_N4X = (1 << 26), + + /* UDMA Debug Status Register */ + IDEUDMADEBUG = 0x2c, +}; + +struct ep93xx_pata_data { + const struct platform_device *pdev; + void __iomem *ide_base; + struct ata_timing t; + bool iordy; + + unsigned long udma_in_phys; + unsigned long udma_out_phys; + + struct dma_chan *dma_rx_channel; + struct ep93xx_dma_data dma_rx_data; + struct dma_chan *dma_tx_channel; + struct ep93xx_dma_data dma_tx_data; +}; + +static void ep93xx_pata_clear_regs(void __iomem *base) +{ + writel(IDECTRL_CS0N | IDECTRL_CS1N | IDECTRL_DIORN | + IDECTRL_DIOWN, base + IDECTRL); + + writel(0, base + IDECFG); + writel(0, base + IDEMDMAOP); + writel(0, base + IDEUDMAOP); + writel(0, base + IDEDATAOUT); + writel(0, base + IDEDATAIN); + writel(0, base + IDEMDMADATAOUT); + writel(0, base + IDEMDMADATAIN); + writel(0, base + IDEUDMADATAOUT); + writel(0, base + IDEUDMADATAIN); + writel(0, base + IDEUDMADEBUG); +} + +static bool ep93xx_pata_check_iordy(void __iomem *base) +{ + return !!(readl(base + IDECTRL) & IDECTRL_IORDY); +} + +/* + * According to EP93xx User's Guide, WST field of IDECFG specifies number + * of HCLK cycles to hold the data bus after a PIO write operation. + * It should be programmed to guarantee following delays: + * + * PIO Mode [ns] + * 0 30 + * 1 20 + * 2 15 + * 3 10 + * 4 5 + * + * Maximum possible value for HCLK is 100MHz. + */ +static int ep93xx_pata_get_wst(int pio_mode) +{ + int val; + + if (pio_mode == 0) + val = 3; + else if (pio_mode < 3) + val = 2; + else + val = 1; + + return val << IDECFG_WST_SHIFT; +} + +static void ep93xx_pata_enable_pio(void __iomem *base, int pio_mode) +{ + writel(IDECFG_IDEEN | IDECFG_PIO | + ep93xx_pata_get_wst(pio_mode) | + (pio_mode << IDECFG_MODE_SHIFT), base + IDECFG); +} + +/* + * Based on delay loop found in mach-pxa/mp900.c. + * + * Single iteration should take 5 cpu cycles. This is 25ns assuming the + * fastest ep93xx cpu speed (200MHz) and is better optimized for PIO4 timings + * than eg. 20ns. + */ +static void ep93xx_pata_delay(unsigned long count) +{ + __asm__ volatile ( + "0:\n" + "mov r0, r0\n" + "subs %0, %1, #1\n" + "bge 0b\n" + : "=r" (count) + : "0" (count) + ); +} + +static unsigned long ep93xx_pata_wait_for_iordy(void __iomem *base, + unsigned long t2) +{ + /* + * According to ATA specification, IORDY pin can be first sampled + * tA = 35ns after activation of DIOR-/DIOW-. Maximum IORDY pulse + * width is tB = 1250ns. + * + * We are already t2 delay loop iterations after activation of + * DIOR-/DIOW-, so we set timeout to (1250 + 35) / 25 - t2 additional + * delay loop iterations. + */ + unsigned long start = (1250 + 35) / 25 - t2; + unsigned long counter = start; + + while (!ep93xx_pata_check_iordy(base) && counter--) + ep93xx_pata_delay(1); + return start - counter; +} + +/* common part at start of ep93xx_pata_read/write() */ +static void ep93xx_pata_rw_begin(void __iomem *base, unsigned long addr, + unsigned long t1) +{ + writel(IDECTRL_DIOWN | IDECTRL_DIORN | addr, base + IDECTRL); + ep93xx_pata_delay(t1); +} + +/* common part at end of ep93xx_pata_read/write() */ +static void ep93xx_pata_rw_end(void __iomem *base, unsigned long addr, + bool iordy, unsigned long t0, unsigned long t2, + unsigned long t2i) +{ + ep93xx_pata_delay(t2); + /* lengthen t2 if needed */ + if (iordy) + t2 += ep93xx_pata_wait_for_iordy(base, t2); + writel(IDECTRL_DIOWN | IDECTRL_DIORN | addr, base + IDECTRL); + if (t0 > t2 && t0 - t2 > t2i) + ep93xx_pata_delay(t0 - t2); + else + ep93xx_pata_delay(t2i); +} + +static u16 ep93xx_pata_read(struct ep93xx_pata_data *drv_data, + unsigned long addr, + bool reg) +{ + void __iomem *base = drv_data->ide_base; + const struct ata_timing *t = &drv_data->t; + unsigned long t0 = reg ? t->cyc8b : t->cycle; + unsigned long t2 = reg ? t->act8b : t->active; + unsigned long t2i = reg ? t->rec8b : t->recover; + + ep93xx_pata_rw_begin(base, addr, t->setup); + writel(IDECTRL_DIOWN | addr, base + IDECTRL); + /* + * The IDEDATAIN register is loaded from the DD pins at the positive + * edge of the DIORN signal. (EP93xx UG p27-14) + */ + ep93xx_pata_rw_end(base, addr, drv_data->iordy, t0, t2, t2i); + return readl(base + IDEDATAIN); +} + +/* IDE register read */ +static u16 ep93xx_pata_read_reg(struct ep93xx_pata_data *drv_data, + unsigned long addr) +{ + return ep93xx_pata_read(drv_data, addr, true); +} + +/* PIO data read */ +static u16 ep93xx_pata_read_data(struct ep93xx_pata_data *drv_data, + unsigned long addr) +{ + return ep93xx_pata_read(drv_data, addr, false); +} + +static void ep93xx_pata_write(struct ep93xx_pata_data *drv_data, + u16 value, unsigned long addr, + bool reg) +{ + void __iomem *base = drv_data->ide_base; + const struct ata_timing *t = &drv_data->t; + unsigned long t0 = reg ? t->cyc8b : t->cycle; + unsigned long t2 = reg ? t->act8b : t->active; + unsigned long t2i = reg ? t->rec8b : t->recover; + + ep93xx_pata_rw_begin(base, addr, t->setup); + /* + * Value from IDEDATAOUT register is driven onto the DD pins when + * DIOWN is low. (EP93xx UG p27-13) + */ + writel(value, base + IDEDATAOUT); + writel(IDECTRL_DIORN | addr, base + IDECTRL); + ep93xx_pata_rw_end(base, addr, drv_data->iordy, t0, t2, t2i); +} + +/* IDE register write */ +static void ep93xx_pata_write_reg(struct ep93xx_pata_data *drv_data, + u16 value, unsigned long addr) +{ + ep93xx_pata_write(drv_data, value, addr, true); +} + +/* PIO data write */ +static void ep93xx_pata_write_data(struct ep93xx_pata_data *drv_data, + u16 value, unsigned long addr) +{ + ep93xx_pata_write(drv_data, value, addr, false); +} + +static void ep93xx_pata_set_piomode(struct ata_port *ap, + struct ata_device *adev) +{ + struct ep93xx_pata_data *drv_data = ap->host->private_data; + struct ata_device *pair = ata_dev_pair(adev); + /* + * Calculate timings for the delay loop, assuming ep93xx cpu speed + * is 200MHz (maximum possible for ep93xx). If actual cpu speed is + * slower, we will wait a bit longer in each delay. + * Additional division of cpu speed by 5, because single iteration + * of our delay loop takes 5 cpu cycles (25ns). + */ + unsigned long T = 1000000 / (200 / 5); + + ata_timing_compute(adev, adev->pio_mode, &drv_data->t, T, 0); + if (pair && pair->pio_mode) { + struct ata_timing t; + ata_timing_compute(pair, pair->pio_mode, &t, T, 0); + ata_timing_merge(&t, &drv_data->t, &drv_data->t, + ATA_TIMING_SETUP | ATA_TIMING_8BIT); + } + drv_data->iordy = ata_pio_need_iordy(adev); + + ep93xx_pata_enable_pio(drv_data->ide_base, + adev->pio_mode - XFER_PIO_0); +} + +/* Note: original code is ata_sff_check_status */ +static u8 ep93xx_pata_check_status(struct ata_port *ap) +{ + struct ep93xx_pata_data *drv_data = ap->host->private_data; + + return ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_STATUS); +} + +static u8 ep93xx_pata_check_altstatus(struct ata_port *ap) +{ + struct ep93xx_pata_data *drv_data = ap->host->private_data; + + return ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_ALTSTATUS); +} + +/* Note: original code is ata_sff_tf_load */ +static void ep93xx_pata_tf_load(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + struct ep93xx_pata_data *drv_data = ap->host->private_data; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + ep93xx_pata_write_reg(drv_data, tf->ctl, IDECTRL_ADDR_CTL); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + ep93xx_pata_write_reg(drv_data, tf->hob_feature, + IDECTRL_ADDR_FEATURE); + ep93xx_pata_write_reg(drv_data, tf->hob_nsect, + IDECTRL_ADDR_NSECT); + ep93xx_pata_write_reg(drv_data, tf->hob_lbal, + IDECTRL_ADDR_LBAL); + ep93xx_pata_write_reg(drv_data, tf->hob_lbam, + IDECTRL_ADDR_LBAM); + ep93xx_pata_write_reg(drv_data, tf->hob_lbah, + IDECTRL_ADDR_LBAH); + } + + if (is_addr) { + ep93xx_pata_write_reg(drv_data, tf->feature, + IDECTRL_ADDR_FEATURE); + ep93xx_pata_write_reg(drv_data, tf->nsect, IDECTRL_ADDR_NSECT); + ep93xx_pata_write_reg(drv_data, tf->lbal, IDECTRL_ADDR_LBAL); + ep93xx_pata_write_reg(drv_data, tf->lbam, IDECTRL_ADDR_LBAM); + ep93xx_pata_write_reg(drv_data, tf->lbah, IDECTRL_ADDR_LBAH); + } + + if (tf->flags & ATA_TFLAG_DEVICE) + ep93xx_pata_write_reg(drv_data, tf->device, + IDECTRL_ADDR_DEVICE); + + ata_wait_idle(ap); +} + +/* Note: original code is ata_sff_tf_read */ +static void ep93xx_pata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ep93xx_pata_data *drv_data = ap->host->private_data; + + tf->command = ep93xx_pata_check_status(ap); + tf->feature = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_FEATURE); + tf->nsect = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_NSECT); + tf->lbal = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAL); + tf->lbam = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAM); + tf->lbah = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAH); + tf->device = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_DEVICE); + + if (tf->flags & ATA_TFLAG_LBA48) { + ep93xx_pata_write_reg(drv_data, tf->ctl | ATA_HOB, + IDECTRL_ADDR_CTL); + tf->hob_feature = ep93xx_pata_read_reg(drv_data, + IDECTRL_ADDR_FEATURE); + tf->hob_nsect = ep93xx_pata_read_reg(drv_data, + IDECTRL_ADDR_NSECT); + tf->hob_lbal = ep93xx_pata_read_reg(drv_data, + IDECTRL_ADDR_LBAL); + tf->hob_lbam = ep93xx_pata_read_reg(drv_data, + IDECTRL_ADDR_LBAM); + tf->hob_lbah = ep93xx_pata_read_reg(drv_data, + IDECTRL_ADDR_LBAH); + ep93xx_pata_write_reg(drv_data, tf->ctl, IDECTRL_ADDR_CTL); + ap->last_ctl = tf->ctl; + } +} + +/* Note: original code is ata_sff_exec_command */ +static void ep93xx_pata_exec_command(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + struct ep93xx_pata_data *drv_data = ap->host->private_data; + + ep93xx_pata_write_reg(drv_data, tf->command, + IDECTRL_ADDR_COMMAND); + ata_sff_pause(ap); +} + +/* Note: original code is ata_sff_dev_select */ +static void ep93xx_pata_dev_select(struct ata_port *ap, unsigned int device) +{ + struct ep93xx_pata_data *drv_data = ap->host->private_data; + u8 tmp = ATA_DEVICE_OBS; + + if (device != 0) + tmp |= ATA_DEV1; + + ep93xx_pata_write_reg(drv_data, tmp, IDECTRL_ADDR_DEVICE); + ata_sff_pause(ap); /* needed; also flushes, for mmio */ +} + +/* Note: original code is ata_sff_set_devctl */ +static void ep93xx_pata_set_devctl(struct ata_port *ap, u8 ctl) +{ + struct ep93xx_pata_data *drv_data = ap->host->private_data; + + ep93xx_pata_write_reg(drv_data, ctl, IDECTRL_ADDR_CTL); +} + +/* Note: original code is ata_sff_data_xfer */ +static unsigned int ep93xx_pata_data_xfer(struct ata_device *adev, + unsigned char *buf, + unsigned int buflen, int rw) +{ + struct ata_port *ap = adev->link->ap; + struct ep93xx_pata_data *drv_data = ap->host->private_data; + u16 *data = (u16 *)buf; + unsigned int words = buflen >> 1; + + /* Transfer multiple of 2 bytes */ + while (words--) + if (rw == READ) + *data++ = cpu_to_le16( + ep93xx_pata_read_data( + drv_data, IDECTRL_ADDR_DATA)); + else + ep93xx_pata_write_data(drv_data, le16_to_cpu(*data++), + IDECTRL_ADDR_DATA); + + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + unsigned char pad[2] = { }; + + buf += buflen - 1; + + if (rw == READ) { + *pad = cpu_to_le16( + ep93xx_pata_read_data( + drv_data, IDECTRL_ADDR_DATA)); + *buf = pad[0]; + } else { + pad[0] = *buf; + ep93xx_pata_write_data(drv_data, le16_to_cpu(*pad), + IDECTRL_ADDR_DATA); + } + words++; + } + + return words << 1; +} + +/* Note: original code is ata_devchk */ +static bool ep93xx_pata_device_is_present(struct ata_port *ap, + unsigned int device) +{ + struct ep93xx_pata_data *drv_data = ap->host->private_data; + u8 nsect, lbal; + + ap->ops->sff_dev_select(ap, device); + + ep93xx_pata_write_reg(drv_data, 0x55, IDECTRL_ADDR_NSECT); + ep93xx_pata_write_reg(drv_data, 0xaa, IDECTRL_ADDR_LBAL); + + ep93xx_pata_write_reg(drv_data, 0xaa, IDECTRL_ADDR_NSECT); + ep93xx_pata_write_reg(drv_data, 0x55, IDECTRL_ADDR_LBAL); + + ep93xx_pata_write_reg(drv_data, 0x55, IDECTRL_ADDR_NSECT); + ep93xx_pata_write_reg(drv_data, 0xaa, IDECTRL_ADDR_LBAL); + + nsect = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_NSECT); + lbal = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAL); + + if ((nsect == 0x55) && (lbal == 0xaa)) + return true; + + return false; +} + +/* Note: original code is ata_sff_wait_after_reset */ +static int ep93xx_pata_wait_after_reset(struct ata_link *link, + unsigned int devmask, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct ep93xx_pata_data *drv_data = ap->host->private_data; + unsigned int dev0 = devmask & (1 << 0); + unsigned int dev1 = devmask & (1 << 1); + int rc, ret = 0; + + ata_msleep(ap, ATA_WAIT_AFTER_RESET); + + /* always check readiness of the master device */ + rc = ata_sff_wait_ready(link, deadline); + /* + * -ENODEV means the odd clown forgot the D7 pulldown resistor + * and TF status is 0xff, bail out on it too. + */ + if (rc) + return rc; + + /* + * if device 1 was found in ata_devchk, wait for register + * access briefly, then wait for BSY to clear. + */ + if (dev1) { + int i; + + ap->ops->sff_dev_select(ap, 1); + + /* + * Wait for register access. Some ATAPI devices fail + * to set nsect/lbal after reset, so don't waste too + * much time on it. We're gonna wait for !BSY anyway. + */ + for (i = 0; i < 2; i++) { + u8 nsect, lbal; + + nsect = ep93xx_pata_read_reg(drv_data, + IDECTRL_ADDR_NSECT); + lbal = ep93xx_pata_read_reg(drv_data, + IDECTRL_ADDR_LBAL); + if (nsect == 1 && lbal == 1) + break; + msleep(50); /* give drive a breather */ + } + + rc = ata_sff_wait_ready(link, deadline); + if (rc) { + if (rc != -ENODEV) + return rc; + ret = rc; + } + } + /* is all this really necessary? */ + ap->ops->sff_dev_select(ap, 0); + if (dev1) + ap->ops->sff_dev_select(ap, 1); + if (dev0) + ap->ops->sff_dev_select(ap, 0); + + return ret; +} + +/* Note: original code is ata_bus_softreset */ +static int ep93xx_pata_bus_softreset(struct ata_port *ap, unsigned int devmask, + unsigned long deadline) +{ + struct ep93xx_pata_data *drv_data = ap->host->private_data; + + ep93xx_pata_write_reg(drv_data, ap->ctl, IDECTRL_ADDR_CTL); + udelay(20); /* FIXME: flush */ + ep93xx_pata_write_reg(drv_data, ap->ctl | ATA_SRST, IDECTRL_ADDR_CTL); + udelay(20); /* FIXME: flush */ + ep93xx_pata_write_reg(drv_data, ap->ctl, IDECTRL_ADDR_CTL); + ap->last_ctl = ap->ctl; + + return ep93xx_pata_wait_after_reset(&ap->link, devmask, deadline); +} + +static void ep93xx_pata_release_dma(struct ep93xx_pata_data *drv_data) +{ + if (drv_data->dma_rx_channel) { + dma_release_channel(drv_data->dma_rx_channel); + drv_data->dma_rx_channel = NULL; + } + if (drv_data->dma_tx_channel) { + dma_release_channel(drv_data->dma_tx_channel); + drv_data->dma_tx_channel = NULL; + } +} + +static bool ep93xx_pata_dma_filter(struct dma_chan *chan, void *filter_param) +{ + if (ep93xx_dma_chan_is_m2p(chan)) + return false; + + chan->private = filter_param; + return true; +} + +static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data) +{ + const struct platform_device *pdev = drv_data->pdev; + dma_cap_mask_t mask; + struct dma_slave_config conf; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* + * Request two channels for IDE. Another possibility would be + * to request only one channel, and reprogram it's direction at + * start of new transfer. + */ + drv_data->dma_rx_data.port = EP93XX_DMA_IDE; + drv_data->dma_rx_data.direction = DMA_FROM_DEVICE; + drv_data->dma_rx_data.name = "ep93xx-pata-rx"; + drv_data->dma_rx_channel = dma_request_channel(mask, + ep93xx_pata_dma_filter, &drv_data->dma_rx_data); + if (!drv_data->dma_rx_channel) + return; + + drv_data->dma_tx_data.port = EP93XX_DMA_IDE; + drv_data->dma_tx_data.direction = DMA_TO_DEVICE; + drv_data->dma_tx_data.name = "ep93xx-pata-tx"; + drv_data->dma_tx_channel = dma_request_channel(mask, + ep93xx_pata_dma_filter, &drv_data->dma_tx_data); + if (!drv_data->dma_tx_channel) { + dma_release_channel(drv_data->dma_rx_channel); + return; + } + + /* Configure receive channel direction and source address */ + memset(&conf, 0, sizeof(conf)); + conf.direction = DMA_FROM_DEVICE; + conf.src_addr = drv_data->udma_in_phys; + conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + if (dmaengine_slave_config(drv_data->dma_rx_channel, &conf)) { + dev_err(&pdev->dev, "failed to configure rx dma channel\n"); + ep93xx_pata_release_dma(drv_data); + return; + } + + /* Configure transmit channel direction and destination address */ + memset(&conf, 0, sizeof(conf)); + conf.direction = DMA_TO_DEVICE; + conf.dst_addr = drv_data->udma_out_phys; + conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + if (dmaengine_slave_config(drv_data->dma_tx_channel, &conf)) { + dev_err(&pdev->dev, "failed to configure tx dma channel\n"); + ep93xx_pata_release_dma(drv_data); + } +} + +static void ep93xx_pata_dma_start(struct ata_queued_cmd *qc) +{ + struct dma_async_tx_descriptor *txd; + struct ep93xx_pata_data *drv_data = qc->ap->host->private_data; + void __iomem *base = drv_data->ide_base; + struct ata_device *adev = qc->dev; + u32 v = qc->dma_dir == DMA_TO_DEVICE ? IDEUDMAOP_RWOP : 0; + struct dma_chan *channel = qc->dma_dir == DMA_TO_DEVICE + ? drv_data->dma_tx_channel : drv_data->dma_rx_channel; + + txd = dmaengine_prep_slave_sg(channel, qc->sg, qc->n_elem, qc->dma_dir, + DMA_CTRL_ACK); + if (!txd) { + dev_err(qc->ap->dev, "failed to prepare slave for sg dma\n"); + return; + } + txd->callback = NULL; + txd->callback_param = NULL; + + if (dmaengine_submit(txd) < 0) { + dev_err(qc->ap->dev, "failed to submit dma transfer\n"); + return; + } + dma_async_issue_pending(channel); + + /* + * When enabling UDMA operation, IDEUDMAOP register needs to be + * programmed in three step sequence: + * 1) set or clear the RWOP bit, + * 2) perform dummy read of the register, + * 3) set the UEN bit. + */ + writel(v, base + IDEUDMAOP); + readl(base + IDEUDMAOP); + writel(v | IDEUDMAOP_UEN, base + IDEUDMAOP); + + writel(IDECFG_IDEEN | IDECFG_UDMA | + ((adev->xfer_mode - XFER_UDMA_0) << IDECFG_MODE_SHIFT), + base + IDECFG); +} + +static void ep93xx_pata_dma_stop(struct ata_queued_cmd *qc) +{ + struct ep93xx_pata_data *drv_data = qc->ap->host->private_data; + void __iomem *base = drv_data->ide_base; + + /* terminate all dma transfers, if not yet finished */ + dmaengine_terminate_all(drv_data->dma_rx_channel); + dmaengine_terminate_all(drv_data->dma_tx_channel); + + /* + * To properly stop IDE-DMA, IDEUDMAOP register must to be cleared + * and IDECTRL register must be set to default value. + */ + writel(0, base + IDEUDMAOP); + writel(readl(base + IDECTRL) | IDECTRL_DIOWN | IDECTRL_DIORN | + IDECTRL_CS0N | IDECTRL_CS1N, base + IDECTRL); + + ep93xx_pata_enable_pio(drv_data->ide_base, + qc->dev->pio_mode - XFER_PIO_0); + + ata_sff_dma_pause(qc->ap); +} + +static void ep93xx_pata_dma_setup(struct ata_queued_cmd *qc) +{ + qc->ap->ops->sff_exec_command(qc->ap, &qc->tf); +} + +static u8 ep93xx_pata_dma_status(struct ata_port *ap) +{ + struct ep93xx_pata_data *drv_data = ap->host->private_data; + u32 val = readl(drv_data->ide_base + IDEUDMASTS); + + /* + * UDMA Status Register bits: + * + * DMAIDE - DMA request signal from UDMA state machine, + * INTIDE - INT line generated by UDMA because of errors in the + * state machine, + * SBUSY - UDMA state machine busy, not in idle state, + * NDO - error for data-out not completed, + * NDI - error for data-in not completed, + * N4X - error for data transferred not multiplies of four + * 32-bit words. + * (EP93xx UG p27-17) + */ + if (val & IDEUDMASTS_NDO || val & IDEUDMASTS_NDI || + val & IDEUDMASTS_N4X || val & IDEUDMASTS_INTIDE) + return ATA_DMA_ERR; + + /* read INTRQ (INT[3]) pin input state */ + if (readl(drv_data->ide_base + IDECTRL) & IDECTRL_INTRQ) + return ATA_DMA_INTR; + + if (val & IDEUDMASTS_SBUSY || val & IDEUDMASTS_DMAIDE) + return ATA_DMA_ACTIVE; + + return 0; +} + +/* Note: original code is ata_sff_softreset */ +static int ep93xx_pata_softreset(struct ata_link *al, unsigned int *classes, + unsigned long deadline) +{ + struct ata_port *ap = al->ap; + unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; + unsigned int devmask = 0; + int rc; + u8 err; + + /* determine if device 0/1 are present */ + if (ep93xx_pata_device_is_present(ap, 0)) + devmask |= (1 << 0); + if (slave_possible && ep93xx_pata_device_is_present(ap, 1)) + devmask |= (1 << 1); + + /* select device 0 again */ + ap->ops->sff_dev_select(al->ap, 0); + + /* issue bus reset */ + rc = ep93xx_pata_bus_softreset(ap, devmask, deadline); + /* if link is ocuppied, -ENODEV too is an error */ + if (rc && (rc != -ENODEV || sata_scr_valid(al))) { + ata_link_err(al, "SRST failed (errno=%d)\n", rc); + return rc; + } + + /* determine by signature whether we have ATA or ATAPI devices */ + classes[0] = ata_sff_dev_classify(&al->device[0], devmask & (1 << 0), + &err); + if (slave_possible && err != 0x81) + classes[1] = ata_sff_dev_classify(&al->device[1], + devmask & (1 << 1), &err); + + return 0; +} + +/* Note: original code is ata_sff_drain_fifo */ +static void ep93xx_pata_drain_fifo(struct ata_queued_cmd *qc) +{ + int count; + struct ata_port *ap; + struct ep93xx_pata_data *drv_data; + + /* We only need to flush incoming data when a command was running */ + if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) + return; + + ap = qc->ap; + drv_data = ap->host->private_data; + /* Drain up to 64K of data before we give up this recovery method */ + for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) + && count < 65536; count += 2) + ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_DATA); + + /* Can become DEBUG later */ + if (count) + ata_port_dbg(ap, "drained %d bytes to clear DRQ.\n", count); + +} + +static int ep93xx_pata_port_start(struct ata_port *ap) +{ + struct ep93xx_pata_data *drv_data = ap->host->private_data; + + /* + * Set timings to safe values at startup (= number of ns from ATA + * specification), we'll switch to properly calculated values later. + */ + drv_data->t = *ata_timing_find_mode(XFER_PIO_0); + return 0; +} + +static struct scsi_host_template ep93xx_pata_sht = { + ATA_BASE_SHT(DRV_NAME), + /* ep93xx dma implementation limit */ + .sg_tablesize = 32, + /* ep93xx dma can't transfer 65536 bytes at once */ + .dma_boundary = 0x7fff, +}; + +static struct ata_port_operations ep93xx_pata_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .qc_prep = ata_noop_qc_prep, + + .softreset = ep93xx_pata_softreset, + .hardreset = ATA_OP_NULL, + + .sff_dev_select = ep93xx_pata_dev_select, + .sff_set_devctl = ep93xx_pata_set_devctl, + .sff_check_status = ep93xx_pata_check_status, + .sff_check_altstatus = ep93xx_pata_check_altstatus, + .sff_tf_load = ep93xx_pata_tf_load, + .sff_tf_read = ep93xx_pata_tf_read, + .sff_exec_command = ep93xx_pata_exec_command, + .sff_data_xfer = ep93xx_pata_data_xfer, + .sff_drain_fifo = ep93xx_pata_drain_fifo, + .sff_irq_clear = ATA_OP_NULL, + + .set_piomode = ep93xx_pata_set_piomode, + + .bmdma_setup = ep93xx_pata_dma_setup, + .bmdma_start = ep93xx_pata_dma_start, + .bmdma_stop = ep93xx_pata_dma_stop, + .bmdma_status = ep93xx_pata_dma_status, + + .cable_detect = ata_cable_unknown, + .port_start = ep93xx_pata_port_start, +}; + +static int ep93xx_pata_probe(struct platform_device *pdev) +{ + struct ep93xx_pata_data *drv_data; + struct ata_host *host; + struct ata_port *ap; + int irq; + struct resource *mem_res; + void __iomem *ide_base; + int err; + + err = ep93xx_ide_acquire_gpio(pdev); + if (err) + return err; + + /* INT[3] (IRQ_EP93XX_EXT3) line connected as pull down */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + err = -ENXIO; + goto err_rel_gpio; + } + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ide_base = devm_ioremap_resource(&pdev->dev, mem_res); + if (IS_ERR(ide_base)) { + err = PTR_ERR(ide_base); + goto err_rel_gpio; + } + + drv_data = devm_kzalloc(&pdev->dev, sizeof(*drv_data), GFP_KERNEL); + if (!drv_data) { + err = -ENXIO; + goto err_rel_gpio; + } + + platform_set_drvdata(pdev, drv_data); + drv_data->pdev = pdev; + drv_data->ide_base = ide_base; + drv_data->udma_in_phys = mem_res->start + IDEUDMADATAIN; + drv_data->udma_out_phys = mem_res->start + IDEUDMADATAOUT; + ep93xx_pata_dma_init(drv_data); + + /* allocate host */ + host = ata_host_alloc(&pdev->dev, 1); + if (!host) { + err = -ENXIO; + goto err_rel_dma; + } + + ep93xx_pata_clear_regs(ide_base); + + host->private_data = drv_data; + + ap = host->ports[0]; + ap->dev = &pdev->dev; + ap->ops = &ep93xx_pata_port_ops; + ap->flags |= ATA_FLAG_SLAVE_POSS; + ap->pio_mask = ATA_PIO4; + + /* + * Maximum UDMA modes: + * EP931x rev.E0 - UDMA2 + * EP931x rev.E1 - UDMA3 + * EP931x rev.E2 - UDMA4 + * + * MWDMA support was removed from EP931x rev.E2, + * so this driver supports only UDMA modes. + */ + if (drv_data->dma_rx_channel && drv_data->dma_tx_channel) { + int chip_rev = ep93xx_chip_revision(); + + if (chip_rev == EP93XX_CHIP_REV_E1) + ap->udma_mask = ATA_UDMA3; + else if (chip_rev == EP93XX_CHIP_REV_E2) + ap->udma_mask = ATA_UDMA4; + else + ap->udma_mask = ATA_UDMA2; + } + + /* defaults, pio 0 */ + ep93xx_pata_enable_pio(ide_base, 0); + + dev_info(&pdev->dev, "version " DRV_VERSION "\n"); + + /* activate host */ + err = ata_host_activate(host, irq, ata_bmdma_interrupt, 0, + &ep93xx_pata_sht); + if (err == 0) + return 0; + +err_rel_dma: + ep93xx_pata_release_dma(drv_data); +err_rel_gpio: + ep93xx_ide_release_gpio(pdev); + return err; +} + +static int ep93xx_pata_remove(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + struct ep93xx_pata_data *drv_data = host->private_data; + + ata_host_detach(host); + ep93xx_pata_release_dma(drv_data); + ep93xx_pata_clear_regs(drv_data->ide_base); + ep93xx_ide_release_gpio(pdev); + return 0; +} + +static struct platform_driver ep93xx_pata_platform_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = ep93xx_pata_probe, + .remove = ep93xx_pata_remove, +}; + +module_platform_driver(ep93xx_pata_platform_driver); + +MODULE_AUTHOR("Alessandro Zummo, Lennert Buytenhek, Joao Ramos, " + "Bartlomiej Zolnierkiewicz, Rafal Prylowski"); +MODULE_DESCRIPTION("low-level driver for cirrus ep93xx IDE controller"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("platform:pata_ep93xx"); diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c new file mode 100644 index 000000000..cbc3de793 --- /dev/null +++ b/drivers/ata/pata_hpt366.c @@ -0,0 +1,426 @@ +/* + * Libata driver for the highpoint 366 and 368 UDMA66 ATA controllers. + * + * This driver is heavily based upon: + * + * linux/drivers/ide/pci/hpt366.c Version 0.36 April 25, 2003 + * + * Copyright (C) 1999-2003 Andre Hedrick + * Portions Copyright (C) 2001 Sun Microsystems, Inc. + * Portions Copyright (C) 2003 Red Hat Inc + * + * + * TODO + * Look into engine reset on timeout errors. Should not be required. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_hpt366" +#define DRV_VERSION "0.6.11" + +struct hpt_clock { + u8 xfer_mode; + u32 timing; +}; + +/* key for bus clock timings + * bit + * 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA. + * cycles = value + 1 + * 4:7 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA. + * cycles = value + 1 + * 8:11 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file + * register access. + * 12:15 cmd_low_time. Active time of DIOW_/DIOR_ during task file + * register access. + * 16:18 udma_cycle_time. Clock cycles for UDMA xfer? + * 19:21 pre_high_time. Time to initialize 1st cycle for PIO and MW DMA xfer. + * 22:24 cmd_pre_high_time. Time to initialize 1st PIO cycle for task file + * register access. + * 28 UDMA enable. + * 29 DMA enable. + * 30 PIO_MST enable. If set, the chip is in bus master mode during + * PIO xfer. + * 31 FIFO enable. + */ + +static const struct hpt_clock hpt366_40[] = { + { XFER_UDMA_4, 0x900fd943 }, + { XFER_UDMA_3, 0x900ad943 }, + { XFER_UDMA_2, 0x900bd943 }, + { XFER_UDMA_1, 0x9008d943 }, + { XFER_UDMA_0, 0x9008d943 }, + + { XFER_MW_DMA_2, 0xa008d943 }, + { XFER_MW_DMA_1, 0xa010d955 }, + { XFER_MW_DMA_0, 0xa010d9fc }, + + { XFER_PIO_4, 0xc008d963 }, + { XFER_PIO_3, 0xc010d974 }, + { XFER_PIO_2, 0xc010d997 }, + { XFER_PIO_1, 0xc010d9c7 }, + { XFER_PIO_0, 0xc018d9d9 }, + { 0, 0x0120d9d9 } +}; + +static const struct hpt_clock hpt366_33[] = { + { XFER_UDMA_4, 0x90c9a731 }, + { XFER_UDMA_3, 0x90cfa731 }, + { XFER_UDMA_2, 0x90caa731 }, + { XFER_UDMA_1, 0x90cba731 }, + { XFER_UDMA_0, 0x90c8a731 }, + + { XFER_MW_DMA_2, 0xa0c8a731 }, + { XFER_MW_DMA_1, 0xa0c8a732 }, /* 0xa0c8a733 */ + { XFER_MW_DMA_0, 0xa0c8a797 }, + + { XFER_PIO_4, 0xc0c8a731 }, + { XFER_PIO_3, 0xc0c8a742 }, + { XFER_PIO_2, 0xc0d0a753 }, + { XFER_PIO_1, 0xc0d0a7a3 }, /* 0xc0d0a793 */ + { XFER_PIO_0, 0xc0d0a7aa }, /* 0xc0d0a7a7 */ + { 0, 0x0120a7a7 } +}; + +static const struct hpt_clock hpt366_25[] = { + { XFER_UDMA_4, 0x90c98521 }, + { XFER_UDMA_3, 0x90cf8521 }, + { XFER_UDMA_2, 0x90cf8521 }, + { XFER_UDMA_1, 0x90cb8521 }, + { XFER_UDMA_0, 0x90cb8521 }, + + { XFER_MW_DMA_2, 0xa0ca8521 }, + { XFER_MW_DMA_1, 0xa0ca8532 }, + { XFER_MW_DMA_0, 0xa0ca8575 }, + + { XFER_PIO_4, 0xc0ca8521 }, + { XFER_PIO_3, 0xc0ca8532 }, + { XFER_PIO_2, 0xc0ca8542 }, + { XFER_PIO_1, 0xc0d08572 }, + { XFER_PIO_0, 0xc0d08585 }, + { 0, 0x01208585 } +}; + +/** + * hpt36x_find_mode - find the hpt36x timing + * @ap: ATA port + * @speed: transfer mode + * + * Return the 32bit register programming information for this channel + * that matches the speed provided. + */ + +static u32 hpt36x_find_mode(struct ata_port *ap, int speed) +{ + struct hpt_clock *clocks = ap->host->private_data; + + while (clocks->xfer_mode) { + if (clocks->xfer_mode == speed) + return clocks->timing; + clocks++; + } + BUG(); + return 0xffffffffU; /* silence compiler warning */ +} + +static const char * const bad_ata33[] = { + "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", + "Maxtor 90845U3", "Maxtor 90650U2", + "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", + "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2", + "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", + "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4", + "Maxtor 90510D4", + "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2", + "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", + "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4", + "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", + "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2", + NULL +}; + +static const char * const bad_ata66_4[] = { + "IBM-DTLA-307075", + "IBM-DTLA-307060", + "IBM-DTLA-307045", + "IBM-DTLA-307030", + "IBM-DTLA-307020", + "IBM-DTLA-307015", + "IBM-DTLA-305040", + "IBM-DTLA-305030", + "IBM-DTLA-305020", + "IC35L010AVER07-0", + "IC35L020AVER07-0", + "IC35L030AVER07-0", + "IC35L040AVER07-0", + "IC35L060AVER07-0", + "WDC AC310200R", + NULL +}; + +static const char * const bad_ata66_3[] = { + "WDC AC310200R", + NULL +}; + +static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, + const char * const list[]) +{ + unsigned char model_num[ATA_ID_PROD_LEN + 1]; + int i = 0; + + ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num)); + + while (list[i] != NULL) { + if (!strcmp(list[i], model_num)) { + pr_warn("%s is not supported for %s\n", + modestr, list[i]); + return 1; + } + i++; + } + return 0; +} + +/** + * hpt366_filter - mode selection filter + * @adev: ATA device + * + * Block UDMA on devices that cause trouble with this controller. + */ + +static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask) +{ + if (adev->class == ATA_DEV_ATA) { + if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33)) + mask &= ~ATA_MASK_UDMA; + if (hpt_dma_blacklisted(adev, "UDMA3", bad_ata66_3)) + mask &= ~(0xF8 << ATA_SHIFT_UDMA); + if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4)) + mask &= ~(0xF0 << ATA_SHIFT_UDMA); + } else if (adev->class == ATA_DEV_ATAPI) + mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + + return mask; +} + +static int hpt36x_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ata66; + + /* + * Each channel of pata_hpt366 occupies separate PCI function + * as the primary channel and bit1 indicates the cable type. + */ + pci_read_config_byte(pdev, 0x5A, &ata66); + if (ata66 & 2) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + +static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev, + u8 mode) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr = 0x40 + 4 * adev->devno; + u32 mask, reg, t; + + /* determine timing mask and find matching clock entry */ + if (mode < XFER_MW_DMA_0) + mask = 0xc1f8ffff; + else if (mode < XFER_UDMA_0) + mask = 0x303800ff; + else + mask = 0x30070000; + + t = hpt36x_find_mode(ap, mode); + + /* + * Combine new mode bits with old config bits and disable + * on-chip PIO FIFO/buffer (and PIO MST mode as well) to avoid + * problems handling I/O errors later. + */ + pci_read_config_dword(pdev, addr, ®); + reg = ((reg & ~mask) | (t & mask)) & ~0xc0000000; + pci_write_config_dword(pdev, addr, reg); +} + +/** + * hpt366_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Perform PIO mode setup. + */ + +static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + hpt366_set_mode(ap, adev, adev->pio_mode); +} + +/** + * hpt366_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * Set up the channel for MWDMA or UDMA modes. Much the same as with + * PIO, load the mode number and then set MWDMA or UDMA flag. + */ + +static void hpt366_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + hpt366_set_mode(ap, adev, adev->dma_mode); +} + +static struct scsi_host_template hpt36x_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +/* + * Configuration for HPT366/68 + */ + +static struct ata_port_operations hpt366_port_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = hpt36x_cable_detect, + .mode_filter = hpt366_filter, + .set_piomode = hpt366_set_piomode, + .set_dmamode = hpt366_set_dmamode, +}; + +/** + * hpt36x_init_chipset - common chip setup + * @dev: PCI device + * + * Perform the chip setup work that must be done at both init and + * resume time + */ + +static void hpt36x_init_chipset(struct pci_dev *dev) +{ + u8 drive_fast; + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4)); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78); + pci_write_config_byte(dev, PCI_MIN_GNT, 0x08); + pci_write_config_byte(dev, PCI_MAX_LAT, 0x08); + + pci_read_config_byte(dev, 0x51, &drive_fast); + if (drive_fast & 0x80) + pci_write_config_byte(dev, 0x51, drive_fast & ~0x80); +} + +/** + * hpt36x_init_one - Initialise an HPT366/368 + * @dev: PCI device + * @id: Entry in match table + * + * Initialise an HPT36x device. There are some interesting complications + * here. Firstly the chip may report 366 and be one of several variants. + * Secondly all the timings depend on the clock for the chip which we must + * detect and look up + * + * This is the known chip mappings. It may be missing a couple of later + * releases. + * + * Chip version PCI Rev Notes + * HPT366 4 (HPT366) 0 UDMA66 + * HPT366 4 (HPT366) 1 UDMA66 + * HPT368 4 (HPT366) 2 UDMA66 + * HPT37x/30x 4 (HPT366) 3+ Other driver + * + */ + +static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static const struct ata_port_info info_hpt366 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, + .port_ops = &hpt366_port_ops + }; + const struct ata_port_info *ppi[] = { &info_hpt366, NULL }; + + void *hpriv = NULL; + u32 reg1; + int rc; + + rc = pcim_enable_device(dev); + if (rc) + return rc; + + /* May be a later chip in disguise. Check */ + /* Newer chips are not in the HPT36x driver. Ignore them */ + if (dev->revision > 2) + return -ENODEV; + + hpt36x_init_chipset(dev); + + pci_read_config_dword(dev, 0x40, ®1); + + /* PCI clocking determines the ATA timing values to use */ + /* info_hpt366 is safe against re-entry so we can scribble on it */ + switch ((reg1 & 0x700) >> 8) { + case 9: + hpriv = &hpt366_40; + break; + case 5: + hpriv = &hpt366_25; + break; + default: + hpriv = &hpt366_33; + break; + } + /* Now kick off ATA set up */ + return ata_pci_bmdma_init_one(dev, ppi, &hpt36x_sht, hpriv, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int hpt36x_reinit_one(struct pci_dev *dev) +{ + struct ata_host *host = pci_get_drvdata(dev); + int rc; + + rc = ata_pci_device_do_resume(dev); + if (rc) + return rc; + hpt36x_init_chipset(dev); + ata_host_resume(host); + return 0; +} +#endif + +static const struct pci_device_id hpt36x[] = { + { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), }, + { }, +}; + +static struct pci_driver hpt36x_pci_driver = { + .name = DRV_NAME, + .id_table = hpt36x, + .probe = hpt36x_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = hpt36x_reinit_one, +#endif +}; + +module_pci_driver(hpt36x_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the Highpoint HPT366/368"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, hpt36x); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c new file mode 100644 index 000000000..3ba843f5c --- /dev/null +++ b/drivers/ata/pata_hpt37x.c @@ -0,0 +1,1066 @@ +/* + * Libata driver for the highpoint 37x and 30x UDMA66 ATA controllers. + * + * This driver is heavily based upon: + * + * linux/drivers/ide/pci/hpt366.c Version 0.36 April 25, 2003 + * + * Copyright (C) 1999-2003 Andre Hedrick + * Portions Copyright (C) 2001 Sun Microsystems, Inc. + * Portions Copyright (C) 2003 Red Hat Inc + * Portions Copyright (C) 2005-2010 MontaVista Software, Inc. + * + * TODO + * Look into engine reset on timeout errors. Should not be required. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_hpt37x" +#define DRV_VERSION "0.6.23" + +struct hpt_clock { + u8 xfer_speed; + u32 timing; +}; + +struct hpt_chip { + const char *name; + unsigned int base; + struct hpt_clock const *clocks[4]; +}; + +/* key for bus clock timings + * bit + * 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA. + * cycles = value + 1 + * 4:8 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA. + * cycles = value + 1 + * 9:12 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file + * register access. + * 13:17 cmd_low_time. Active time of DIOW_/DIOR_ during task file + * register access. + * 18:20 udma_cycle_time. Clock cycles for UDMA xfer. + * 21 CLK frequency for UDMA: 0=ATA clock, 1=dual ATA clock. + * 22:24 pre_high_time. Time to initialize 1st cycle for PIO and MW DMA xfer. + * 25:27 cmd_pre_high_time. Time to initialize 1st PIO cycle for task file + * register access. + * 28 UDMA enable. + * 29 DMA enable. + * 30 PIO_MST enable. If set, the chip is in bus master mode during + * PIO xfer. + * 31 FIFO enable. Only for PIO. + */ + +static struct hpt_clock hpt37x_timings_33[] = { + { XFER_UDMA_6, 0x12446231 }, /* 0x12646231 ?? */ + { XFER_UDMA_5, 0x12446231 }, + { XFER_UDMA_4, 0x12446231 }, + { XFER_UDMA_3, 0x126c6231 }, + { XFER_UDMA_2, 0x12486231 }, + { XFER_UDMA_1, 0x124c6233 }, + { XFER_UDMA_0, 0x12506297 }, + + { XFER_MW_DMA_2, 0x22406c31 }, + { XFER_MW_DMA_1, 0x22406c33 }, + { XFER_MW_DMA_0, 0x22406c97 }, + + { XFER_PIO_4, 0x06414e31 }, + { XFER_PIO_3, 0x06414e42 }, + { XFER_PIO_2, 0x06414e53 }, + { XFER_PIO_1, 0x06814e93 }, + { XFER_PIO_0, 0x06814ea7 } +}; + +static struct hpt_clock hpt37x_timings_50[] = { + { XFER_UDMA_6, 0x12848242 }, + { XFER_UDMA_5, 0x12848242 }, + { XFER_UDMA_4, 0x12ac8242 }, + { XFER_UDMA_3, 0x128c8242 }, + { XFER_UDMA_2, 0x120c8242 }, + { XFER_UDMA_1, 0x12148254 }, + { XFER_UDMA_0, 0x121882ea }, + + { XFER_MW_DMA_2, 0x22808242 }, + { XFER_MW_DMA_1, 0x22808254 }, + { XFER_MW_DMA_0, 0x228082ea }, + + { XFER_PIO_4, 0x0a81f442 }, + { XFER_PIO_3, 0x0a81f443 }, + { XFER_PIO_2, 0x0a81f454 }, + { XFER_PIO_1, 0x0ac1f465 }, + { XFER_PIO_0, 0x0ac1f48a } +}; + +static struct hpt_clock hpt37x_timings_66[] = { + { XFER_UDMA_6, 0x1c869c62 }, + { XFER_UDMA_5, 0x1cae9c62 }, /* 0x1c8a9c62 */ + { XFER_UDMA_4, 0x1c8a9c62 }, + { XFER_UDMA_3, 0x1c8e9c62 }, + { XFER_UDMA_2, 0x1c929c62 }, + { XFER_UDMA_1, 0x1c9a9c62 }, + { XFER_UDMA_0, 0x1c829c62 }, + + { XFER_MW_DMA_2, 0x2c829c62 }, + { XFER_MW_DMA_1, 0x2c829c66 }, + { XFER_MW_DMA_0, 0x2c829d2e }, + + { XFER_PIO_4, 0x0c829c62 }, + { XFER_PIO_3, 0x0c829c84 }, + { XFER_PIO_2, 0x0c829ca6 }, + { XFER_PIO_1, 0x0d029d26 }, + { XFER_PIO_0, 0x0d029d5e } +}; + + +static const struct hpt_chip hpt370 = { + "HPT370", + 48, + { + hpt37x_timings_33, + NULL, + NULL, + NULL + } +}; + +static const struct hpt_chip hpt370a = { + "HPT370A", + 48, + { + hpt37x_timings_33, + NULL, + hpt37x_timings_50, + NULL + } +}; + +static const struct hpt_chip hpt372 = { + "HPT372", + 55, + { + hpt37x_timings_33, + NULL, + hpt37x_timings_50, + hpt37x_timings_66 + } +}; + +static const struct hpt_chip hpt302 = { + "HPT302", + 66, + { + hpt37x_timings_33, + NULL, + hpt37x_timings_50, + hpt37x_timings_66 + } +}; + +static const struct hpt_chip hpt371 = { + "HPT371", + 66, + { + hpt37x_timings_33, + NULL, + hpt37x_timings_50, + hpt37x_timings_66 + } +}; + +static const struct hpt_chip hpt372a = { + "HPT372A", + 66, + { + hpt37x_timings_33, + NULL, + hpt37x_timings_50, + hpt37x_timings_66 + } +}; + +static const struct hpt_chip hpt374 = { + "HPT374", + 48, + { + hpt37x_timings_33, + NULL, + NULL, + NULL + } +}; + +/** + * hpt37x_find_mode - reset the hpt37x bus + * @ap: ATA port + * @speed: transfer mode + * + * Return the 32bit register programming information for this channel + * that matches the speed provided. + */ + +static u32 hpt37x_find_mode(struct ata_port *ap, int speed) +{ + struct hpt_clock *clocks = ap->host->private_data; + + while (clocks->xfer_speed) { + if (clocks->xfer_speed == speed) + return clocks->timing; + clocks++; + } + BUG(); + return 0xffffffffU; /* silence compiler warning */ +} + +static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, + const char * const list[]) +{ + unsigned char model_num[ATA_ID_PROD_LEN + 1]; + int i = 0; + + ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num)); + + while (list[i] != NULL) { + if (!strcmp(list[i], model_num)) { + pr_warn("%s is not supported for %s\n", + modestr, list[i]); + return 1; + } + i++; + } + return 0; +} + +static const char * const bad_ata33[] = { + "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", + "Maxtor 90845U3", "Maxtor 90650U2", + "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", + "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2", + "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", + "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4", + "Maxtor 90510D4", + "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2", + "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", + "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4", + "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", + "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2", + NULL +}; + +static const char * const bad_ata100_5[] = { + "IBM-DTLA-307075", + "IBM-DTLA-307060", + "IBM-DTLA-307045", + "IBM-DTLA-307030", + "IBM-DTLA-307020", + "IBM-DTLA-307015", + "IBM-DTLA-305040", + "IBM-DTLA-305030", + "IBM-DTLA-305020", + "IC35L010AVER07-0", + "IC35L020AVER07-0", + "IC35L030AVER07-0", + "IC35L040AVER07-0", + "IC35L060AVER07-0", + "WDC AC310200R", + NULL +}; + +/** + * hpt370_filter - mode selection filter + * @adev: ATA device + * + * Block UDMA on devices that cause trouble with this controller. + */ + +static unsigned long hpt370_filter(struct ata_device *adev, unsigned long mask) +{ + if (adev->class == ATA_DEV_ATA) { + if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33)) + mask &= ~ATA_MASK_UDMA; + if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5)) + mask &= ~(0xE0 << ATA_SHIFT_UDMA); + } + return mask; +} + +/** + * hpt370a_filter - mode selection filter + * @adev: ATA device + * + * Block UDMA on devices that cause trouble with this controller. + */ + +static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask) +{ + if (adev->class == ATA_DEV_ATA) { + if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5)) + mask &= ~(0xE0 << ATA_SHIFT_UDMA); + } + return mask; +} + +/** + * hpt372_filter - mode selection filter + * @adev: ATA device + * @mask: mode mask + * + * The Marvell bridge chips used on the HighPoint SATA cards do not seem + * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes... + */ +static unsigned long hpt372_filter(struct ata_device *adev, unsigned long mask) +{ + if (ata_id_is_sata(adev->id)) + mask &= ~((0xE << ATA_SHIFT_UDMA) | ATA_MASK_MWDMA); + + return mask; +} + +/** + * hpt37x_cable_detect - Detect the cable type + * @ap: ATA port to detect on + * + * Return the cable type attached to this port + */ + +static int hpt37x_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 scr2, ata66; + + pci_read_config_byte(pdev, 0x5B, &scr2); + pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01); + + udelay(10); /* debounce */ + + /* Cable register now active */ + pci_read_config_byte(pdev, 0x5A, &ata66); + /* Restore state */ + pci_write_config_byte(pdev, 0x5B, scr2); + + if (ata66 & (2 >> ap->port_no)) + return ATA_CBL_PATA40; + else + return ATA_CBL_PATA80; +} + +/** + * hpt374_fn1_cable_detect - Detect the cable type + * @ap: ATA port to detect on + * + * Return the cable type attached to this port + */ + +static int hpt374_fn1_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned int mcrbase = 0x50 + 4 * ap->port_no; + u16 mcr3; + u8 ata66; + + /* Do the extra channel work */ + pci_read_config_word(pdev, mcrbase + 2, &mcr3); + /* Set bit 15 of 0x52 to enable TCBLID as input */ + pci_write_config_word(pdev, mcrbase + 2, mcr3 | 0x8000); + pci_read_config_byte(pdev, 0x5A, &ata66); + /* Reset TCBLID/FCBLID to output */ + pci_write_config_word(pdev, mcrbase + 2, mcr3); + + if (ata66 & (2 >> ap->port_no)) + return ATA_CBL_PATA40; + else + return ATA_CBL_PATA80; +} + +/** + * hpt37x_pre_reset - reset the hpt37x bus + * @link: ATA link to reset + * @deadline: deadline jiffies for the operation + * + * Perform the initial reset handling for the HPT37x. + */ + +static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits hpt37x_enable_bits[] = { + { 0x50, 1, 0x04, 0x04 }, + { 0x54, 1, 0x04, 0x04 } + }; + + if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no])) + return -ENOENT; + + /* Reset the state machine */ + pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); + udelay(100); + + return ata_sff_prereset(link, deadline); +} + +static void hpt370_set_mode(struct ata_port *ap, struct ata_device *adev, + u8 mode) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg, timing, mask; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + fast &= ~0x02; + fast |= 0x01; + pci_write_config_byte(pdev, addr2, fast); + + /* Determine timing mask and find matching mode entry */ + if (mode < XFER_MW_DMA_0) + mask = 0xcfc3ffff; + else if (mode < XFER_UDMA_0) + mask = 0x31c001ff; + else + mask = 0x303c0000; + + timing = hpt37x_find_mode(ap, mode); + + pci_read_config_dword(pdev, addr1, ®); + reg = (reg & ~mask) | (timing & mask); + pci_write_config_dword(pdev, addr1, reg); +} +/** + * hpt370_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Perform PIO mode setup. + */ + +static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + hpt370_set_mode(ap, adev, adev->pio_mode); +} + +/** + * hpt370_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * Set up the channel for MWDMA or UDMA modes. + */ + +static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + hpt370_set_mode(ap, adev, adev->dma_mode); +} + +/** + * hpt370_bmdma_end - DMA engine stop + * @qc: ATA command + * + * Work around the HPT370 DMA engine. + */ + +static void hpt370_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + void __iomem *bmdma = ap->ioaddr.bmdma_addr; + u8 dma_stat = ioread8(bmdma + ATA_DMA_STATUS); + u8 dma_cmd; + + if (dma_stat & ATA_DMA_ACTIVE) { + udelay(20); + dma_stat = ioread8(bmdma + ATA_DMA_STATUS); + } + if (dma_stat & ATA_DMA_ACTIVE) { + /* Clear the engine */ + pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); + udelay(10); + /* Stop DMA */ + dma_cmd = ioread8(bmdma + ATA_DMA_CMD); + iowrite8(dma_cmd & ~ATA_DMA_START, bmdma + ATA_DMA_CMD); + /* Clear Error */ + dma_stat = ioread8(bmdma + ATA_DMA_STATUS); + iowrite8(dma_stat | ATA_DMA_INTR | ATA_DMA_ERR, + bmdma + ATA_DMA_STATUS); + /* Clear the engine */ + pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); + udelay(10); + } + ata_bmdma_stop(qc); +} + +static void hpt372_set_mode(struct ata_port *ap, struct ata_device *adev, + u8 mode) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg, timing, mask; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + fast &= ~0x07; + pci_write_config_byte(pdev, addr2, fast); + + /* Determine timing mask and find matching mode entry */ + if (mode < XFER_MW_DMA_0) + mask = 0xcfc3ffff; + else if (mode < XFER_UDMA_0) + mask = 0x31c001ff; + else + mask = 0x303c0000; + + timing = hpt37x_find_mode(ap, mode); + + pci_read_config_dword(pdev, addr1, ®); + reg = (reg & ~mask) | (timing & mask); + pci_write_config_dword(pdev, addr1, reg); +} + +/** + * hpt372_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Perform PIO mode setup. + */ + +static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + hpt372_set_mode(ap, adev, adev->pio_mode); +} + +/** + * hpt372_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * Set up the channel for MWDMA or UDMA modes. + */ + +static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + hpt372_set_mode(ap, adev, adev->dma_mode); +} + +/** + * hpt37x_bmdma_end - DMA engine stop + * @qc: ATA command + * + * Clean up after the HPT372 and later DMA engine + */ + +static void hpt37x_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int mscreg = 0x50 + 4 * ap->port_no; + u8 bwsr_stat, msc_stat; + + pci_read_config_byte(pdev, 0x6A, &bwsr_stat); + pci_read_config_byte(pdev, mscreg, &msc_stat); + if (bwsr_stat & (1 << ap->port_no)) + pci_write_config_byte(pdev, mscreg, msc_stat | 0x30); + ata_bmdma_stop(qc); +} + + +static struct scsi_host_template hpt37x_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +/* + * Configuration for HPT370 + */ + +static struct ata_port_operations hpt370_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .bmdma_stop = hpt370_bmdma_stop, + + .mode_filter = hpt370_filter, + .cable_detect = hpt37x_cable_detect, + .set_piomode = hpt370_set_piomode, + .set_dmamode = hpt370_set_dmamode, + .prereset = hpt37x_pre_reset, +}; + +/* + * Configuration for HPT370A. Close to 370 but less filters + */ + +static struct ata_port_operations hpt370a_port_ops = { + .inherits = &hpt370_port_ops, + .mode_filter = hpt370a_filter, +}; + +/* + * Configuration for HPT371 and HPT302. Slightly different PIO and DMA + * mode setting functionality. + */ + +static struct ata_port_operations hpt302_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .bmdma_stop = hpt37x_bmdma_stop, + + .cable_detect = hpt37x_cable_detect, + .set_piomode = hpt372_set_piomode, + .set_dmamode = hpt372_set_dmamode, + .prereset = hpt37x_pre_reset, +}; + +/* + * Configuration for HPT372. Mode setting works like 371 and 302 + * but we have a mode filter. + */ + +static struct ata_port_operations hpt372_port_ops = { + .inherits = &hpt302_port_ops, + .mode_filter = hpt372_filter, +}; + +/* + * Configuration for HPT374. Mode setting and filtering works like 372 + * but we have a different cable detection procedure for function 1. + */ + +static struct ata_port_operations hpt374_fn1_port_ops = { + .inherits = &hpt372_port_ops, + .cable_detect = hpt374_fn1_cable_detect, +}; + +/** + * hpt37x_clock_slot - Turn timing to PC clock entry + * @freq: Reported frequency timing + * @base: Base timing + * + * Turn the timing data intoa clock slot (0 for 33, 1 for 40, 2 for 50 + * and 3 for 66Mhz) + */ + +static int hpt37x_clock_slot(unsigned int freq, unsigned int base) +{ + unsigned int f = (base * freq) / 192; /* Mhz */ + if (f < 40) + return 0; /* 33Mhz slot */ + if (f < 45) + return 1; /* 40Mhz slot */ + if (f < 55) + return 2; /* 50Mhz slot */ + return 3; /* 60Mhz slot */ +} + +/** + * hpt37x_calibrate_dpll - Calibrate the DPLL loop + * @dev: PCI device + * + * Perform a calibration cycle on the HPT37x DPLL. Returns 1 if this + * succeeds + */ + +static int hpt37x_calibrate_dpll(struct pci_dev *dev) +{ + u8 reg5b; + u32 reg5c; + int tries; + + for (tries = 0; tries < 0x5000; tries++) { + udelay(50); + pci_read_config_byte(dev, 0x5b, ®5b); + if (reg5b & 0x80) { + /* See if it stays set */ + for (tries = 0; tries < 0x1000; tries++) { + pci_read_config_byte(dev, 0x5b, ®5b); + /* Failed ? */ + if ((reg5b & 0x80) == 0) + return 0; + } + /* Turn off tuning, we have the DPLL set */ + pci_read_config_dword(dev, 0x5c, ®5c); + pci_write_config_dword(dev, 0x5c, reg5c & ~0x100); + return 1; + } + } + /* Never went stable */ + return 0; +} + +static u32 hpt374_read_freq(struct pci_dev *pdev) +{ + u32 freq; + unsigned long io_base = pci_resource_start(pdev, 4); + + if (PCI_FUNC(pdev->devfn) & 1) { + struct pci_dev *pdev_0; + + pdev_0 = pci_get_slot(pdev->bus, pdev->devfn - 1); + /* Someone hot plugged the controller on us ? */ + if (pdev_0 == NULL) + return 0; + io_base = pci_resource_start(pdev_0, 4); + freq = inl(io_base + 0x90); + pci_dev_put(pdev_0); + } else + freq = inl(io_base + 0x90); + return freq; +} + +/** + * hpt37x_init_one - Initialise an HPT37X/302 + * @dev: PCI device + * @id: Entry in match table + * + * Initialise an HPT37x device. There are some interesting complications + * here. Firstly the chip may report 366 and be one of several variants. + * Secondly all the timings depend on the clock for the chip which we must + * detect and look up + * + * This is the known chip mappings. It may be missing a couple of later + * releases. + * + * Chip version PCI Rev Notes + * HPT366 4 (HPT366) 0 Other driver + * HPT366 4 (HPT366) 1 Other driver + * HPT368 4 (HPT366) 2 Other driver + * HPT370 4 (HPT366) 3 UDMA100 + * HPT370A 4 (HPT366) 4 UDMA100 + * HPT372 4 (HPT366) 5 UDMA133 (1) + * HPT372N 4 (HPT366) 6 Other driver + * HPT372A 5 (HPT372) 1 UDMA133 (1) + * HPT372N 5 (HPT372) 2 Other driver + * HPT302 6 (HPT302) 1 UDMA133 + * HPT302N 6 (HPT302) 2 Other driver + * HPT371 7 (HPT371) * UDMA133 + * HPT374 8 (HPT374) * UDMA133 4 channel + * HPT372N 9 (HPT372N) * Other driver + * + * (1) UDMA133 support depends on the bus clock + */ + +static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + /* HPT370 - UDMA100 */ + static const struct ata_port_info info_hpt370 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &hpt370_port_ops + }; + /* HPT370A - UDMA100 */ + static const struct ata_port_info info_hpt370a = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &hpt370a_port_ops + }; + /* HPT370 - UDMA66 */ + static const struct ata_port_info info_hpt370_33 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, + .port_ops = &hpt370_port_ops + }; + /* HPT370A - UDMA66 */ + static const struct ata_port_info info_hpt370a_33 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, + .port_ops = &hpt370a_port_ops + }; + /* HPT372 - UDMA133 */ + static const struct ata_port_info info_hpt372 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &hpt372_port_ops + }; + /* HPT371, 302 - UDMA133 */ + static const struct ata_port_info info_hpt302 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &hpt302_port_ops + }; + /* HPT374 - UDMA100, function 1 uses different cable_detect method */ + static const struct ata_port_info info_hpt374_fn0 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &hpt372_port_ops + }; + static const struct ata_port_info info_hpt374_fn1 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &hpt374_fn1_port_ops + }; + + static const int MHz[4] = { 33, 40, 50, 66 }; + void *private_data = NULL; + const struct ata_port_info *ppi[] = { NULL, NULL }; + u8 rev = dev->revision; + u8 irqmask; + u8 mcr1; + u32 freq; + int prefer_dpll = 1; + + unsigned long iobase = pci_resource_start(dev, 4); + + const struct hpt_chip *chip_table; + int clock_slot; + int rc; + + rc = pcim_enable_device(dev); + if (rc) + return rc; + + switch (dev->device) { + case PCI_DEVICE_ID_TTI_HPT366: + /* May be a later chip in disguise. Check */ + /* Older chips are in the HPT366 driver. Ignore them */ + if (rev < 3) + return -ENODEV; + /* N series chips have their own driver. Ignore */ + if (rev == 6) + return -ENODEV; + + switch (rev) { + case 3: + ppi[0] = &info_hpt370; + chip_table = &hpt370; + prefer_dpll = 0; + break; + case 4: + ppi[0] = &info_hpt370a; + chip_table = &hpt370a; + prefer_dpll = 0; + break; + case 5: + ppi[0] = &info_hpt372; + chip_table = &hpt372; + break; + default: + pr_err("Unknown HPT366 subtype, please report (%d)\n", + rev); + return -ENODEV; + } + break; + case PCI_DEVICE_ID_TTI_HPT372: + /* 372N if rev >= 2 */ + if (rev >= 2) + return -ENODEV; + ppi[0] = &info_hpt372; + chip_table = &hpt372a; + break; + case PCI_DEVICE_ID_TTI_HPT302: + /* 302N if rev > 1 */ + if (rev > 1) + return -ENODEV; + ppi[0] = &info_hpt302; + /* Check this */ + chip_table = &hpt302; + break; + case PCI_DEVICE_ID_TTI_HPT371: + if (rev > 1) + return -ENODEV; + ppi[0] = &info_hpt302; + chip_table = &hpt371; + /* + * Single channel device, master is not present but the BIOS + * (or us for non x86) must mark it absent + */ + pci_read_config_byte(dev, 0x50, &mcr1); + mcr1 &= ~0x04; + pci_write_config_byte(dev, 0x50, mcr1); + break; + case PCI_DEVICE_ID_TTI_HPT374: + chip_table = &hpt374; + if (!(PCI_FUNC(dev->devfn) & 1)) + *ppi = &info_hpt374_fn0; + else + *ppi = &info_hpt374_fn1; + break; + default: + pr_err("PCI table is bogus, please report (%d)\n", dev->device); + return -ENODEV; + } + /* Ok so this is a chip we support */ + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4)); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78); + pci_write_config_byte(dev, PCI_MIN_GNT, 0x08); + pci_write_config_byte(dev, PCI_MAX_LAT, 0x08); + + pci_read_config_byte(dev, 0x5A, &irqmask); + irqmask &= ~0x10; + pci_write_config_byte(dev, 0x5a, irqmask); + + /* + * default to pci clock. make sure MA15/16 are set to output + * to prevent drives having problems with 40-pin cables. Needed + * for some drives such as IBM-DTLA which will not enter ready + * state on reset when PDIAG is a input. + */ + + pci_write_config_byte(dev, 0x5b, 0x23); + + /* + * HighPoint does this for HPT372A. + * NOTE: This register is only writeable via I/O space. + */ + if (chip_table == &hpt372a) + outb(0x0e, iobase + 0x9c); + + /* + * Some devices do not let this value be accessed via PCI space + * according to the old driver. In addition we must use the value + * from FN 0 on the HPT374. + */ + + if (chip_table == &hpt374) { + freq = hpt374_read_freq(dev); + if (freq == 0) + return -ENODEV; + } else + freq = inl(iobase + 0x90); + + if ((freq >> 12) != 0xABCDE) { + int i; + u8 sr; + u32 total = 0; + + pr_warn("BIOS has not set timing clocks\n"); + + /* This is the process the HPT371 BIOS is reported to use */ + for (i = 0; i < 128; i++) { + pci_read_config_byte(dev, 0x78, &sr); + total += sr & 0x1FF; + udelay(15); + } + freq = total / 128; + } + freq &= 0x1FF; + + /* + * Turn the frequency check into a band and then find a timing + * table to match it. + */ + + clock_slot = hpt37x_clock_slot(freq, chip_table->base); + if (chip_table->clocks[clock_slot] == NULL || prefer_dpll) { + /* + * We need to try PLL mode instead + * + * For non UDMA133 capable devices we should + * use a 50MHz DPLL by choice + */ + unsigned int f_low, f_high; + int dpll, adjust; + + /* Compute DPLL */ + dpll = (ppi[0]->udma_mask & 0xC0) ? 3 : 2; + + f_low = (MHz[clock_slot] * 48) / MHz[dpll]; + f_high = f_low + 2; + if (clock_slot > 1) + f_high += 2; + + /* Select the DPLL clock. */ + pci_write_config_byte(dev, 0x5b, 0x21); + pci_write_config_dword(dev, 0x5C, + (f_high << 16) | f_low | 0x100); + + for (adjust = 0; adjust < 8; adjust++) { + if (hpt37x_calibrate_dpll(dev)) + break; + /* + * See if it'll settle at a fractionally + * different clock + */ + if (adjust & 1) + f_low -= adjust >> 1; + else + f_high += adjust >> 1; + pci_write_config_dword(dev, 0x5C, + (f_high << 16) | f_low | 0x100); + } + if (adjust == 8) { + pr_err("DPLL did not stabilize!\n"); + return -ENODEV; + } + if (dpll == 3) + private_data = (void *)hpt37x_timings_66; + else + private_data = (void *)hpt37x_timings_50; + + pr_info("bus clock %dMHz, using %dMHz DPLL\n", + MHz[clock_slot], MHz[dpll]); + } else { + private_data = (void *)chip_table->clocks[clock_slot]; + /* + * Perform a final fixup. Note that we will have used the + * DPLL on the HPT372 which means we don't have to worry + * about lack of UDMA133 support on lower clocks + */ + + if (clock_slot < 2 && ppi[0] == &info_hpt370) + ppi[0] = &info_hpt370_33; + if (clock_slot < 2 && ppi[0] == &info_hpt370a) + ppi[0] = &info_hpt370a_33; + + pr_info("%s using %dMHz bus clock\n", + chip_table->name, MHz[clock_slot]); + } + + /* Now kick off ATA set up */ + return ata_pci_bmdma_init_one(dev, ppi, &hpt37x_sht, private_data, 0); +} + +static const struct pci_device_id hpt37x[] = { + { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), }, + { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT371), }, + { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372), }, + { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT374), }, + { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302), }, + + { }, +}; + +static struct pci_driver hpt37x_pci_driver = { + .name = DRV_NAME, + .id_table = hpt37x, + .probe = hpt37x_init_one, + .remove = ata_pci_remove_one +}; + +module_pci_driver(hpt37x_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the Highpoint HPT37x/30x"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, hpt37x); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c new file mode 100644 index 000000000..b93c0f072 --- /dev/null +++ b/drivers/ata/pata_hpt3x2n.c @@ -0,0 +1,629 @@ +/* + * Libata driver for the HighPoint 371N, 372N, and 302N UDMA66 ATA controllers. + * + * This driver is heavily based upon: + * + * linux/drivers/ide/pci/hpt366.c Version 0.36 April 25, 2003 + * + * Copyright (C) 1999-2003 Andre Hedrick + * Portions Copyright (C) 2001 Sun Microsystems, Inc. + * Portions Copyright (C) 2003 Red Hat Inc + * Portions Copyright (C) 2005-2010 MontaVista Software, Inc. + * + * + * TODO + * Work out best PLL policy + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_hpt3x2n" +#define DRV_VERSION "0.3.15" + +enum { + HPT_PCI_FAST = (1 << 31), + PCI66 = (1 << 1), + USE_DPLL = (1 << 0) +}; + +struct hpt_clock { + u8 xfer_speed; + u32 timing; +}; + +struct hpt_chip { + const char *name; + struct hpt_clock *clocks[3]; +}; + +/* key for bus clock timings + * bit + * 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA. + * cycles = value + 1 + * 4:8 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA. + * cycles = value + 1 + * 9:12 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file + * register access. + * 13:17 cmd_low_time. Active time of DIOW_/DIOR_ during task file + * register access. + * 18:20 udma_cycle_time. Clock cycles for UDMA xfer. + * 21 CLK frequency for UDMA: 0=ATA clock, 1=dual ATA clock. + * 22:24 pre_high_time. Time to initialize 1st cycle for PIO and MW DMA xfer. + * 25:27 cmd_pre_high_time. Time to initialize 1st PIO cycle for task file + * register access. + * 28 UDMA enable. + * 29 DMA enable. + * 30 PIO_MST enable. If set, the chip is in bus master mode during + * PIO xfer. + * 31 FIFO enable. Only for PIO. + */ + +/* 66MHz DPLL clocks */ + +static struct hpt_clock hpt3x2n_clocks[] = { + { XFER_UDMA_7, 0x1c869c62 }, + { XFER_UDMA_6, 0x1c869c62 }, + { XFER_UDMA_5, 0x1c8a9c62 }, + { XFER_UDMA_4, 0x1c8a9c62 }, + { XFER_UDMA_3, 0x1c8e9c62 }, + { XFER_UDMA_2, 0x1c929c62 }, + { XFER_UDMA_1, 0x1c9a9c62 }, + { XFER_UDMA_0, 0x1c829c62 }, + + { XFER_MW_DMA_2, 0x2c829c62 }, + { XFER_MW_DMA_1, 0x2c829c66 }, + { XFER_MW_DMA_0, 0x2c829d2e }, + + { XFER_PIO_4, 0x0c829c62 }, + { XFER_PIO_3, 0x0c829c84 }, + { XFER_PIO_2, 0x0c829ca6 }, + { XFER_PIO_1, 0x0d029d26 }, + { XFER_PIO_0, 0x0d029d5e }, +}; + +/** + * hpt3x2n_find_mode - reset the hpt3x2n bus + * @ap: ATA port + * @speed: transfer mode + * + * Return the 32bit register programming information for this channel + * that matches the speed provided. For the moment the clocks table + * is hard coded but easy to change. This will be needed if we use + * different DPLLs + */ + +static u32 hpt3x2n_find_mode(struct ata_port *ap, int speed) +{ + struct hpt_clock *clocks = hpt3x2n_clocks; + + while (clocks->xfer_speed) { + if (clocks->xfer_speed == speed) + return clocks->timing; + clocks++; + } + BUG(); + return 0xffffffffU; /* silence compiler warning */ +} + +/** + * hpt372n_filter - mode selection filter + * @adev: ATA device + * @mask: mode mask + * + * The Marvell bridge chips used on the HighPoint SATA cards do not seem + * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes... + */ +static unsigned long hpt372n_filter(struct ata_device *adev, unsigned long mask) +{ + if (ata_id_is_sata(adev->id)) + mask &= ~((0xE << ATA_SHIFT_UDMA) | ATA_MASK_MWDMA); + + return mask; +} + +/** + * hpt3x2n_cable_detect - Detect the cable type + * @ap: ATA port to detect on + * + * Return the cable type attached to this port + */ + +static int hpt3x2n_cable_detect(struct ata_port *ap) +{ + u8 scr2, ata66; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_byte(pdev, 0x5B, &scr2); + pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01); + + udelay(10); /* debounce */ + + /* Cable register now active */ + pci_read_config_byte(pdev, 0x5A, &ata66); + /* Restore state */ + pci_write_config_byte(pdev, 0x5B, scr2); + + if (ata66 & (2 >> ap->port_no)) + return ATA_CBL_PATA40; + else + return ATA_CBL_PATA80; +} + +/** + * hpt3x2n_pre_reset - reset the hpt3x2n bus + * @link: ATA link to reset + * @deadline: deadline jiffies for the operation + * + * Perform the initial reset handling for the 3x2n series controllers. + * Reset the hardware and state machine, + */ + +static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + /* Reset the state machine */ + pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); + udelay(100); + + return ata_sff_prereset(link, deadline); +} + +static void hpt3x2n_set_mode(struct ata_port *ap, struct ata_device *adev, + u8 mode) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg, timing, mask; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + fast &= ~0x07; + pci_write_config_byte(pdev, addr2, fast); + + /* Determine timing mask and find matching mode entry */ + if (mode < XFER_MW_DMA_0) + mask = 0xcfc3ffff; + else if (mode < XFER_UDMA_0) + mask = 0x31c001ff; + else + mask = 0x303c0000; + + timing = hpt3x2n_find_mode(ap, mode); + + pci_read_config_dword(pdev, addr1, ®); + reg = (reg & ~mask) | (timing & mask); + pci_write_config_dword(pdev, addr1, reg); +} + +/** + * hpt3x2n_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Perform PIO mode setup. + */ + +static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + hpt3x2n_set_mode(ap, adev, adev->pio_mode); +} + +/** + * hpt3x2n_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * Set up the channel for MWDMA or UDMA modes. + */ + +static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + hpt3x2n_set_mode(ap, adev, adev->dma_mode); +} + +/** + * hpt3x2n_bmdma_end - DMA engine stop + * @qc: ATA command + * + * Clean up after the HPT3x2n and later DMA engine + */ + +static void hpt3x2n_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int mscreg = 0x50 + 2 * ap->port_no; + u8 bwsr_stat, msc_stat; + + pci_read_config_byte(pdev, 0x6A, &bwsr_stat); + pci_read_config_byte(pdev, mscreg, &msc_stat); + if (bwsr_stat & (1 << ap->port_no)) + pci_write_config_byte(pdev, mscreg, msc_stat | 0x30); + ata_bmdma_stop(qc); +} + +/** + * hpt3x2n_set_clock - clock control + * @ap: ATA port + * @source: 0x21 or 0x23 for PLL or PCI sourced clock + * + * Switch the ATA bus clock between the PLL and PCI clock sources + * while correctly isolating the bus and resetting internal logic + * + * We must use the DPLL for + * - writing + * - second channel UDMA7 (SATA ports) or higher + * - 66MHz PCI + * + * or we will underclock the device and get reduced performance. + */ + +static void hpt3x2n_set_clock(struct ata_port *ap, int source) +{ + void __iomem *bmdma = ap->ioaddr.bmdma_addr - ap->port_no * 8; + + /* Tristate the bus */ + iowrite8(0x80, bmdma+0x73); + iowrite8(0x80, bmdma+0x77); + + /* Switch clock and reset channels */ + iowrite8(source, bmdma+0x7B); + iowrite8(0xC0, bmdma+0x79); + + /* Reset state machines, avoid enabling the disabled channels */ + iowrite8(ioread8(bmdma+0x70) | 0x32, bmdma+0x70); + iowrite8(ioread8(bmdma+0x74) | 0x32, bmdma+0x74); + + /* Complete reset */ + iowrite8(0x00, bmdma+0x79); + + /* Reconnect channels to bus */ + iowrite8(0x00, bmdma+0x73); + iowrite8(0x00, bmdma+0x77); +} + +static int hpt3x2n_use_dpll(struct ata_port *ap, int writing) +{ + long flags = (long)ap->host->private_data; + + /* See if we should use the DPLL */ + if (writing) + return USE_DPLL; /* Needed for write */ + if (flags & PCI66) + return USE_DPLL; /* Needed at 66Mhz */ + return 0; +} + +static int hpt3x2n_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_port *alt = ap->host->ports[ap->port_no ^ 1]; + int rc, flags = (long)ap->host->private_data; + int dpll = hpt3x2n_use_dpll(ap, qc->tf.flags & ATA_TFLAG_WRITE); + + /* First apply the usual rules */ + rc = ata_std_qc_defer(qc); + if (rc != 0) + return rc; + + if ((flags & USE_DPLL) != dpll && alt->qc_active) + return ATA_DEFER_PORT; + return 0; +} + +static unsigned int hpt3x2n_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + int flags = (long)ap->host->private_data; + int dpll = hpt3x2n_use_dpll(ap, qc->tf.flags & ATA_TFLAG_WRITE); + + if ((flags & USE_DPLL) != dpll) { + flags &= ~USE_DPLL; + flags |= dpll; + ap->host->private_data = (void *)(long)flags; + + hpt3x2n_set_clock(ap, dpll ? 0x21 : 0x23); + } + return ata_bmdma_qc_issue(qc); +} + +static struct scsi_host_template hpt3x2n_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +/* + * Configuration for HPT302N/371N. + */ + +static struct ata_port_operations hpt3xxn_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .bmdma_stop = hpt3x2n_bmdma_stop, + + .qc_defer = hpt3x2n_qc_defer, + .qc_issue = hpt3x2n_qc_issue, + + .cable_detect = hpt3x2n_cable_detect, + .set_piomode = hpt3x2n_set_piomode, + .set_dmamode = hpt3x2n_set_dmamode, + .prereset = hpt3x2n_pre_reset, +}; + +/* + * Configuration for HPT372N. Same as 302N/371N but we have a mode filter. + */ + +static struct ata_port_operations hpt372n_port_ops = { + .inherits = &hpt3xxn_port_ops, + .mode_filter = &hpt372n_filter, +}; + +/** + * hpt3xn_calibrate_dpll - Calibrate the DPLL loop + * @dev: PCI device + * + * Perform a calibration cycle on the HPT3xN DPLL. Returns 1 if this + * succeeds + */ + +static int hpt3xn_calibrate_dpll(struct pci_dev *dev) +{ + u8 reg5b; + u32 reg5c; + int tries; + + for (tries = 0; tries < 0x5000; tries++) { + udelay(50); + pci_read_config_byte(dev, 0x5b, ®5b); + if (reg5b & 0x80) { + /* See if it stays set */ + for (tries = 0; tries < 0x1000; tries++) { + pci_read_config_byte(dev, 0x5b, ®5b); + /* Failed ? */ + if ((reg5b & 0x80) == 0) + return 0; + } + /* Turn off tuning, we have the DPLL set */ + pci_read_config_dword(dev, 0x5c, ®5c); + pci_write_config_dword(dev, 0x5c, reg5c & ~0x100); + return 1; + } + } + /* Never went stable */ + return 0; +} + +static int hpt3x2n_pci_clock(struct pci_dev *pdev) +{ + unsigned long freq; + u32 fcnt; + unsigned long iobase = pci_resource_start(pdev, 4); + + fcnt = inl(iobase + 0x90); /* Not PCI readable for some chips */ + if ((fcnt >> 12) != 0xABCDE) { + int i; + u16 sr; + u32 total = 0; + + pr_warn("BIOS clock data not set\n"); + + /* This is the process the HPT371 BIOS is reported to use */ + for (i = 0; i < 128; i++) { + pci_read_config_word(pdev, 0x78, &sr); + total += sr & 0x1FF; + udelay(15); + } + fcnt = total / 128; + } + fcnt &= 0x1FF; + + freq = (fcnt * 77) / 192; + + /* Clamp to bands */ + if (freq < 40) + return 33; + if (freq < 45) + return 40; + if (freq < 55) + return 50; + return 66; +} + +/** + * hpt3x2n_init_one - Initialise an HPT37X/302 + * @dev: PCI device + * @id: Entry in match table + * + * Initialise an HPT3x2n device. There are some interesting complications + * here. Firstly the chip may report 366 and be one of several variants. + * Secondly all the timings depend on the clock for the chip which we must + * detect and look up + * + * This is the known chip mappings. It may be missing a couple of later + * releases. + * + * Chip version PCI Rev Notes + * HPT372 4 (HPT366) 5 Other driver + * HPT372N 4 (HPT366) 6 UDMA133 + * HPT372 5 (HPT372) 1 Other driver + * HPT372N 5 (HPT372) 2 UDMA133 + * HPT302 6 (HPT302) * Other driver + * HPT302N 6 (HPT302) > 1 UDMA133 + * HPT371 7 (HPT371) * Other driver + * HPT371N 7 (HPT371) > 1 UDMA133 + * HPT374 8 (HPT374) * Other driver + * HPT372N 9 (HPT372N) * UDMA133 + * + * (1) UDMA133 support depends on the bus clock + */ + +static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + /* HPT372N - UDMA133 */ + static const struct ata_port_info info_hpt372n = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &hpt372n_port_ops + }; + /* HPT302N and HPT371N - UDMA133 */ + static const struct ata_port_info info_hpt3xxn = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &hpt3xxn_port_ops + }; + const struct ata_port_info *ppi[] = { &info_hpt3xxn, NULL }; + u8 rev = dev->revision; + u8 irqmask; + unsigned int pci_mhz; + unsigned int f_low, f_high; + int adjust; + unsigned long iobase = pci_resource_start(dev, 4); + void *hpriv = (void *)USE_DPLL; + int rc; + + rc = pcim_enable_device(dev); + if (rc) + return rc; + + switch (dev->device) { + case PCI_DEVICE_ID_TTI_HPT366: + /* 372N if rev >= 6 */ + if (rev < 6) + return -ENODEV; + goto hpt372n; + case PCI_DEVICE_ID_TTI_HPT371: + /* 371N if rev >= 2 */ + if (rev < 2) + return -ENODEV; + break; + case PCI_DEVICE_ID_TTI_HPT372: + /* 372N if rev >= 2 */ + if (rev < 2) + return -ENODEV; + goto hpt372n; + case PCI_DEVICE_ID_TTI_HPT302: + /* 302N if rev >= 2 */ + if (rev < 2) + return -ENODEV; + break; + case PCI_DEVICE_ID_TTI_HPT372N: +hpt372n: + ppi[0] = &info_hpt372n; + break; + default: + pr_err("PCI table is bogus, please report (%d)\n", dev->device); + return -ENODEV; + } + + /* Ok so this is a chip we support */ + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4)); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78); + pci_write_config_byte(dev, PCI_MIN_GNT, 0x08); + pci_write_config_byte(dev, PCI_MAX_LAT, 0x08); + + pci_read_config_byte(dev, 0x5A, &irqmask); + irqmask &= ~0x10; + pci_write_config_byte(dev, 0x5a, irqmask); + + /* + * HPT371 chips physically have only one channel, the secondary one, + * but the primary channel registers do exist! Go figure... + * So, we manually disable the non-existing channel here + * (if the BIOS hasn't done this already). + */ + if (dev->device == PCI_DEVICE_ID_TTI_HPT371) { + u8 mcr1; + pci_read_config_byte(dev, 0x50, &mcr1); + mcr1 &= ~0x04; + pci_write_config_byte(dev, 0x50, mcr1); + } + + /* + * Tune the PLL. HPT recommend using 75 for SATA, 66 for UDMA133 or + * 50 for UDMA100. Right now we always use 66 + */ + + pci_mhz = hpt3x2n_pci_clock(dev); + + f_low = (pci_mhz * 48) / 66; /* PCI Mhz for 66Mhz DPLL */ + f_high = f_low + 2; /* Tolerance */ + + pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100); + /* PLL clock */ + pci_write_config_byte(dev, 0x5B, 0x21); + + /* Unlike the 37x we don't try jiggling the frequency */ + for (adjust = 0; adjust < 8; adjust++) { + if (hpt3xn_calibrate_dpll(dev)) + break; + pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low); + } + if (adjust == 8) { + pr_err("DPLL did not stabilize!\n"); + return -ENODEV; + } + + pr_info("bus clock %dMHz, using 66MHz DPLL\n", pci_mhz); + + /* + * Set our private data up. We only need a few flags + * so we use it directly. + */ + if (pci_mhz > 60) + hpriv = (void *)(PCI66 | USE_DPLL); + + /* + * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in + * the MISC. register to stretch the UltraDMA Tss timing. + * NOTE: This register is only writeable via I/O space. + */ + if (dev->device == PCI_DEVICE_ID_TTI_HPT371) + outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c); + + /* Now kick off ATA set up */ + return ata_pci_bmdma_init_one(dev, ppi, &hpt3x2n_sht, hpriv, 0); +} + +static const struct pci_device_id hpt3x2n[] = { + { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), }, + { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT371), }, + { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372), }, + { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302), }, + { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372N), }, + + { }, +}; + +static struct pci_driver hpt3x2n_pci_driver = { + .name = DRV_NAME, + .id_table = hpt3x2n, + .probe = hpt3x2n_init_one, + .remove = ata_pci_remove_one +}; + +module_pci_driver(hpt3x2n_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the Highpoint HPT3xxN"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, hpt3x2n); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c new file mode 100644 index 000000000..b2fc02378 --- /dev/null +++ b/drivers/ata/pata_hpt3x3.c @@ -0,0 +1,292 @@ +/* + * pata_hpt3x3 - HPT3x3 driver + * (c) Copyright 2005-2006 Red Hat + * + * Was pata_hpt34x but the naming was confusing as it supported the + * 343 and 363 so it has been renamed. + * + * Based on: + * linux/drivers/ide/pci/hpt34x.c Version 0.40 Sept 10, 2002 + * Copyright (C) 1998-2000 Andre Hedrick + * + * May be copied or modified under the terms of the GNU General Public + * License + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_hpt3x3" +#define DRV_VERSION "0.6.1" + +/** + * hpt3x3_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Set our PIO requirements. This is fairly simple on the HPT3x3 as + * all we have to do is clear the MWDMA and UDMA bits then load the + * mode number. + */ + +static void hpt3x3_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 r1, r2; + int dn = 2 * ap->port_no + adev->devno; + + pci_read_config_dword(pdev, 0x44, &r1); + pci_read_config_dword(pdev, 0x48, &r2); + /* Load the PIO timing number */ + r1 &= ~(7 << (3 * dn)); + r1 |= (adev->pio_mode - XFER_PIO_0) << (3 * dn); + r2 &= ~(0x11 << dn); /* Clear MWDMA and UDMA bits */ + + pci_write_config_dword(pdev, 0x44, r1); + pci_write_config_dword(pdev, 0x48, r2); +} + +#if defined(CONFIG_PATA_HPT3X3_DMA) +/** + * hpt3x3_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * Set up the channel for MWDMA or UDMA modes. Much the same as with + * PIO, load the mode number and then set MWDMA or UDMA flag. + * + * 0x44 : bit 0-2 master mode, 3-5 slave mode, etc + * 0x48 : bit 4/0 DMA/UDMA bit 5/1 for slave etc + */ + +static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 r1, r2; + int dn = 2 * ap->port_no + adev->devno; + int mode_num = adev->dma_mode & 0x0F; + + pci_read_config_dword(pdev, 0x44, &r1); + pci_read_config_dword(pdev, 0x48, &r2); + /* Load the timing number */ + r1 &= ~(7 << (3 * dn)); + r1 |= (mode_num << (3 * dn)); + r2 &= ~(0x11 << dn); /* Clear MWDMA and UDMA bits */ + + if (adev->dma_mode >= XFER_UDMA_0) + r2 |= (0x01 << dn); /* Ultra mode */ + else + r2 |= (0x10 << dn); /* MWDMA */ + + pci_write_config_dword(pdev, 0x44, r1); + pci_write_config_dword(pdev, 0x48, r2); +} + +/** + * hpt3x3_freeze - DMA workaround + * @ap: port to freeze + * + * When freezing an HPT3x3 we must stop any pending DMA before + * writing to the control register or the chip will hang + */ + +static void hpt3x3_freeze(struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.bmdma_addr; + + iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ ATA_DMA_START, + mmio + ATA_DMA_CMD); + ata_sff_dma_pause(ap); + ata_sff_freeze(ap); +} + +/** + * hpt3x3_bmdma_setup - DMA workaround + * @qc: Queued command + * + * When issuing BMDMA we must clean up the error/active bits in + * software on this device + */ + +static void hpt3x3_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + u8 r = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + r |= ATA_DMA_INTR | ATA_DMA_ERR; + iowrite8(r, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + return ata_bmdma_setup(qc); +} + +/** + * hpt3x3_atapi_dma - ATAPI DMA check + * @qc: Queued command + * + * Just say no - we don't do ATAPI DMA + */ + +static int hpt3x3_atapi_dma(struct ata_queued_cmd *qc) +{ + return 1; +} + +#endif /* CONFIG_PATA_HPT3X3_DMA */ + +static struct scsi_host_template hpt3x3_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations hpt3x3_port_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = ata_cable_40wire, + .set_piomode = hpt3x3_set_piomode, +#if defined(CONFIG_PATA_HPT3X3_DMA) + .set_dmamode = hpt3x3_set_dmamode, + .bmdma_setup = hpt3x3_bmdma_setup, + .check_atapi_dma= hpt3x3_atapi_dma, + .freeze = hpt3x3_freeze, +#endif + +}; + +/** + * hpt3x3_init_chipset - chip setup + * @dev: PCI device + * + * Perform the setup required at boot and on resume. + */ + +static void hpt3x3_init_chipset(struct pci_dev *dev) +{ + u16 cmd; + /* Initialize the board */ + pci_write_config_word(dev, 0x80, 0x00); + /* Check if it is a 343 or a 363. 363 has COMMAND_MEMORY set */ + pci_read_config_word(dev, PCI_COMMAND, &cmd); + if (cmd & PCI_COMMAND_MEMORY) + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0); + else + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); +} + +/** + * hpt3x3_init_one - Initialise an HPT343/363 + * @pdev: PCI device + * @id: Entry in match table + * + * Perform basic initialisation. We set the device up so we access all + * ports via BAR4. This is necessary to work around errata. + */ + +static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, +#if defined(CONFIG_PATA_HPT3X3_DMA) + /* Further debug needed */ + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, +#endif + .port_ops = &hpt3x3_port_ops + }; + /* Register offsets of taskfiles in BAR4 area */ + static const u8 offset_cmd[2] = { 0x20, 0x28 }; + static const u8 offset_ctl[2] = { 0x36, 0x3E }; + const struct ata_port_info *ppi[] = { &info, NULL }; + struct ata_host *host; + int i, rc; + void __iomem *base; + + hpt3x3_init_chipset(pdev); + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2); + if (!host) + return -ENOMEM; + /* acquire resources and fill host */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* Everything is relative to BAR4 if we set up this way */ + rc = pcim_iomap_regions(pdev, 1 << 4, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + host->iomap = pcim_iomap_table(pdev); + rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + + base = host->iomap[4]; /* Bus mastering base */ + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + struct ata_ioports *ioaddr = &ap->ioaddr; + + ioaddr->cmd_addr = base + offset_cmd[i]; + ioaddr->altstatus_addr = + ioaddr->ctl_addr = base + offset_ctl[i]; + ioaddr->scr_addr = NULL; + ata_sff_std_ports(ioaddr); + ioaddr->bmdma_addr = base + 8 * i; + + ata_port_pbar_desc(ap, 4, -1, "ioport"); + ata_port_pbar_desc(ap, 4, offset_cmd[i], "cmd"); + } + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, + IRQF_SHARED, &hpt3x3_sht); +} + +#ifdef CONFIG_PM_SLEEP +static int hpt3x3_reinit_one(struct pci_dev *dev) +{ + struct ata_host *host = pci_get_drvdata(dev); + int rc; + + rc = ata_pci_device_do_resume(dev); + if (rc) + return rc; + + hpt3x3_init_chipset(dev); + + ata_host_resume(host); + return 0; +} +#endif + +static const struct pci_device_id hpt3x3[] = { + { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT343), }, + + { }, +}; + +static struct pci_driver hpt3x3_pci_driver = { + .name = DRV_NAME, + .id_table = hpt3x3, + .probe = hpt3x3_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = hpt3x3_reinit_one, +#endif +}; + +module_pci_driver(hpt3x3_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the Highpoint HPT343/363"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, hpt3x3); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c new file mode 100644 index 000000000..d7c732042 --- /dev/null +++ b/drivers/ata/pata_icside.c @@ -0,0 +1,627 @@ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DRV_NAME "pata_icside" + +#define ICS_IDENT_OFFSET 0x2280 + +#define ICS_ARCIN_V5_INTRSTAT 0x0000 +#define ICS_ARCIN_V5_INTROFFSET 0x0004 + +#define ICS_ARCIN_V6_INTROFFSET_1 0x2200 +#define ICS_ARCIN_V6_INTRSTAT_1 0x2290 +#define ICS_ARCIN_V6_INTROFFSET_2 0x3200 +#define ICS_ARCIN_V6_INTRSTAT_2 0x3290 + +struct portinfo { + unsigned int dataoffset; + unsigned int ctrloffset; + unsigned int stepping; +}; + +static const struct portinfo pata_icside_portinfo_v5 = { + .dataoffset = 0x2800, + .ctrloffset = 0x2b80, + .stepping = 6, +}; + +static const struct portinfo pata_icside_portinfo_v6_1 = { + .dataoffset = 0x2000, + .ctrloffset = 0x2380, + .stepping = 6, +}; + +static const struct portinfo pata_icside_portinfo_v6_2 = { + .dataoffset = 0x3000, + .ctrloffset = 0x3380, + .stepping = 6, +}; + +struct pata_icside_state { + void __iomem *irq_port; + void __iomem *ioc_base; + unsigned int type; + unsigned int dma; + struct { + u8 port_sel; + u8 disabled; + unsigned int speed[ATA_MAX_DEVICES]; + } port[2]; +}; + +struct pata_icside_info { + struct pata_icside_state *state; + struct expansion_card *ec; + void __iomem *base; + void __iomem *irqaddr; + unsigned int irqmask; + const expansioncard_ops_t *irqops; + unsigned int mwdma_mask; + unsigned int nr_ports; + const struct portinfo *port[2]; + unsigned long raw_base; + unsigned long raw_ioc_base; +}; + +#define ICS_TYPE_A3IN 0 +#define ICS_TYPE_A3USER 1 +#define ICS_TYPE_V6 3 +#define ICS_TYPE_V5 15 +#define ICS_TYPE_NOTYPE ((unsigned int)-1) + +/* ---------------- Version 5 PCB Support Functions --------------------- */ +/* Prototype: pata_icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr) + * Purpose : enable interrupts from card + */ +static void pata_icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr) +{ + struct pata_icside_state *state = ec->irq_data; + + writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET); +} + +/* Prototype: pata_icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr) + * Purpose : disable interrupts from card + */ +static void pata_icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr) +{ + struct pata_icside_state *state = ec->irq_data; + + readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET); +} + +static const expansioncard_ops_t pata_icside_ops_arcin_v5 = { + .irqenable = pata_icside_irqenable_arcin_v5, + .irqdisable = pata_icside_irqdisable_arcin_v5, +}; + + +/* ---------------- Version 6 PCB Support Functions --------------------- */ +/* Prototype: pata_icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr) + * Purpose : enable interrupts from card + */ +static void pata_icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr) +{ + struct pata_icside_state *state = ec->irq_data; + void __iomem *base = state->irq_port; + + if (!state->port[0].disabled) + writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); + if (!state->port[1].disabled) + writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); +} + +/* Prototype: pata_icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) + * Purpose : disable interrupts from card + */ +static void pata_icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) +{ + struct pata_icside_state *state = ec->irq_data; + + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); +} + +/* Prototype: pata_icside_irqprobe(struct expansion_card *ec) + * Purpose : detect an active interrupt from card + */ +static int pata_icside_irqpending_arcin_v6(struct expansion_card *ec) +{ + struct pata_icside_state *state = ec->irq_data; + + return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 || + readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1; +} + +static const expansioncard_ops_t pata_icside_ops_arcin_v6 = { + .irqenable = pata_icside_irqenable_arcin_v6, + .irqdisable = pata_icside_irqdisable_arcin_v6, + .irqpending = pata_icside_irqpending_arcin_v6, +}; + + +/* + * SG-DMA support. + * + * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers. + * There is only one DMA controller per card, which means that only + * one drive can be accessed at one time. NOTE! We do not enforce that + * here, but we rely on the main IDE driver spotting that both + * interfaces use the same IRQ, which should guarantee this. + */ + +/* + * Configure the IOMD to give the appropriate timings for the transfer + * mode being requested. We take the advice of the ATA standards, and + * calculate the cycle time based on the transfer mode, and the EIDE + * MW DMA specs that the drive provides in the IDENTIFY command. + * + * We have the following IOMD DMA modes to choose from: + * + * Type Active Recovery Cycle + * A 250 (250) 312 (550) 562 (800) + * B 187 (200) 250 (550) 437 (750) + * C 125 (125) 125 (375) 250 (500) + * D 62 (50) 125 (375) 187 (425) + * + * (figures in brackets are actual measured timings on DIOR/DIOW) + * + * However, we also need to take care of the read/write active and + * recovery timings: + * + * Read Write + * Mode Active -- Recovery -- Cycle IOMD type + * MW0 215 50 215 480 A + * MW1 80 50 50 150 C + * MW2 70 25 25 120 C + */ +static void pata_icside_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pata_icside_state *state = ap->host->private_data; + struct ata_timing t; + unsigned int cycle; + char iomd_type; + + /* + * DMA is based on a 16MHz clock + */ + if (ata_timing_compute(adev, adev->dma_mode, &t, 1000, 1)) + return; + + /* + * Choose the IOMD cycle timing which ensure that the interface + * satisfies the measured active, recovery and cycle times. + */ + if (t.active <= 50 && t.recover <= 375 && t.cycle <= 425) + iomd_type = 'D', cycle = 187; + else if (t.active <= 125 && t.recover <= 375 && t.cycle <= 500) + iomd_type = 'C', cycle = 250; + else if (t.active <= 200 && t.recover <= 550 && t.cycle <= 750) + iomd_type = 'B', cycle = 437; + else + iomd_type = 'A', cycle = 562; + + ata_dev_info(adev, "timings: act %dns rec %dns cyc %dns (%c)\n", + t.active, t.recover, t.cycle, iomd_type); + + state->port[ap->port_no].speed[adev->devno] = cycle; +} + +static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pata_icside_state *state = ap->host->private_data; + unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE; + + /* + * We are simplex; BUG if we try to fiddle with DMA + * while it's active. + */ + BUG_ON(dma_channel_active(state->dma)); + + /* + * Route the DMA signals to the correct interface + */ + writeb(state->port[ap->port_no].port_sel, state->ioc_base); + + set_dma_speed(state->dma, state->port[ap->port_no].speed[qc->dev->devno]); + set_dma_sg(state->dma, qc->sg, qc->n_elem); + set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ); + + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} + +static void pata_icside_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pata_icside_state *state = ap->host->private_data; + + BUG_ON(dma_channel_active(state->dma)); + enable_dma(state->dma); +} + +static void pata_icside_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pata_icside_state *state = ap->host->private_data; + + disable_dma(state->dma); + + /* see ata_bmdma_stop */ + ata_sff_dma_pause(ap); +} + +static u8 pata_icside_bmdma_status(struct ata_port *ap) +{ + struct pata_icside_state *state = ap->host->private_data; + void __iomem *irq_port; + + irq_port = state->irq_port + (ap->port_no ? ICS_ARCIN_V6_INTRSTAT_2 : + ICS_ARCIN_V6_INTRSTAT_1); + + return readb(irq_port) & 1 ? ATA_DMA_INTR : 0; +} + +static int icside_dma_init(struct pata_icside_info *info) +{ + struct pata_icside_state *state = info->state; + struct expansion_card *ec = info->ec; + int i; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + state->port[0].speed[i] = 480; + state->port[1].speed[i] = 480; + } + + if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { + state->dma = ec->dma; + info->mwdma_mask = ATA_MWDMA2; + } + + return 0; +} + + +static struct scsi_host_template pata_icside_sht = { + ATA_BASE_SHT(DRV_NAME), + .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, + .dma_boundary = IOMD_DMA_BOUNDARY, +}; + +static void pata_icside_postreset(struct ata_link *link, unsigned int *classes) +{ + struct ata_port *ap = link->ap; + struct pata_icside_state *state = ap->host->private_data; + + if (classes[0] != ATA_DEV_NONE || classes[1] != ATA_DEV_NONE) + return ata_sff_postreset(link, classes); + + state->port[ap->port_no].disabled = 1; + + if (state->type == ICS_TYPE_V6) { + /* + * Disable interrupts from this port, otherwise we + * receive spurious interrupts from the floating + * interrupt line. + */ + void __iomem *irq_port = state->irq_port + + (ap->port_no ? ICS_ARCIN_V6_INTROFFSET_2 : ICS_ARCIN_V6_INTROFFSET_1); + readb(irq_port); + } +} + +static struct ata_port_operations pata_icside_port_ops = { + .inherits = &ata_bmdma_port_ops, + /* no need to build any PRD tables for DMA */ + .qc_prep = ata_noop_qc_prep, + .sff_data_xfer = ata_sff_data_xfer_noirq, + .bmdma_setup = pata_icside_bmdma_setup, + .bmdma_start = pata_icside_bmdma_start, + .bmdma_stop = pata_icside_bmdma_stop, + .bmdma_status = pata_icside_bmdma_status, + + .cable_detect = ata_cable_40wire, + .set_dmamode = pata_icside_set_dmamode, + .postreset = pata_icside_postreset, + + .port_start = ATA_OP_NULL, /* don't need PRD table */ +}; + +static void pata_icside_setup_ioaddr(struct ata_port *ap, void __iomem *base, + struct pata_icside_info *info, + const struct portinfo *port) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + void __iomem *cmd = base + port->dataoffset; + + ioaddr->cmd_addr = cmd; + ioaddr->data_addr = cmd + (ATA_REG_DATA << port->stepping); + ioaddr->error_addr = cmd + (ATA_REG_ERR << port->stepping); + ioaddr->feature_addr = cmd + (ATA_REG_FEATURE << port->stepping); + ioaddr->nsect_addr = cmd + (ATA_REG_NSECT << port->stepping); + ioaddr->lbal_addr = cmd + (ATA_REG_LBAL << port->stepping); + ioaddr->lbam_addr = cmd + (ATA_REG_LBAM << port->stepping); + ioaddr->lbah_addr = cmd + (ATA_REG_LBAH << port->stepping); + ioaddr->device_addr = cmd + (ATA_REG_DEVICE << port->stepping); + ioaddr->status_addr = cmd + (ATA_REG_STATUS << port->stepping); + ioaddr->command_addr = cmd + (ATA_REG_CMD << port->stepping); + + ioaddr->ctl_addr = base + port->ctrloffset; + ioaddr->altstatus_addr = ioaddr->ctl_addr; + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", + info->raw_base + port->dataoffset, + info->raw_base + port->ctrloffset); + + if (info->raw_ioc_base) + ata_port_desc(ap, "iocbase 0x%lx", info->raw_ioc_base); +} + +static int pata_icside_register_v5(struct pata_icside_info *info) +{ + struct pata_icside_state *state = info->state; + void __iomem *base; + + base = ecardm_iomap(info->ec, ECARD_RES_MEMC, 0, 0); + if (!base) + return -ENOMEM; + + state->irq_port = base; + + info->base = base; + info->irqaddr = base + ICS_ARCIN_V5_INTRSTAT; + info->irqmask = 1; + info->irqops = &pata_icside_ops_arcin_v5; + info->nr_ports = 1; + info->port[0] = &pata_icside_portinfo_v5; + + info->raw_base = ecard_resource_start(info->ec, ECARD_RES_MEMC); + + return 0; +} + +static int pata_icside_register_v6(struct pata_icside_info *info) +{ + struct pata_icside_state *state = info->state; + struct expansion_card *ec = info->ec; + void __iomem *ioc_base, *easi_base; + unsigned int sel = 0; + + ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); + if (!ioc_base) + return -ENOMEM; + + easi_base = ioc_base; + + if (ecard_resource_flags(ec, ECARD_RES_EASI)) { + easi_base = ecardm_iomap(ec, ECARD_RES_EASI, 0, 0); + if (!easi_base) + return -ENOMEM; + + /* + * Enable access to the EASI region. + */ + sel = 1 << 5; + } + + writeb(sel, ioc_base); + + state->irq_port = easi_base; + state->ioc_base = ioc_base; + state->port[0].port_sel = sel; + state->port[1].port_sel = sel | 1; + + info->base = easi_base; + info->irqops = &pata_icside_ops_arcin_v6; + info->nr_ports = 2; + info->port[0] = &pata_icside_portinfo_v6_1; + info->port[1] = &pata_icside_portinfo_v6_2; + + info->raw_base = ecard_resource_start(ec, ECARD_RES_EASI); + info->raw_ioc_base = ecard_resource_start(ec, ECARD_RES_IOCFAST); + + return icside_dma_init(info); +} + +static int pata_icside_add_ports(struct pata_icside_info *info) +{ + struct expansion_card *ec = info->ec; + struct ata_host *host; + int i; + + if (info->irqaddr) { + ec->irqaddr = info->irqaddr; + ec->irqmask = info->irqmask; + } + if (info->irqops) + ecard_setirq(ec, info->irqops, info->state); + + /* + * Be on the safe side - disable interrupts + */ + ec->ops->irqdisable(ec, ec->irq); + + host = ata_host_alloc(&ec->dev, info->nr_ports); + if (!host) + return -ENOMEM; + + host->private_data = info->state; + host->flags = ATA_HOST_SIMPLEX; + + for (i = 0; i < info->nr_ports; i++) { + struct ata_port *ap = host->ports[i]; + + ap->pio_mask = ATA_PIO4; + ap->mwdma_mask = info->mwdma_mask; + ap->flags |= ATA_FLAG_SLAVE_POSS; + ap->ops = &pata_icside_port_ops; + + pata_icside_setup_ioaddr(ap, info->base, info, info->port[i]); + } + + return ata_host_activate(host, ec->irq, ata_bmdma_interrupt, 0, + &pata_icside_sht); +} + +static int pata_icside_probe(struct expansion_card *ec, + const struct ecard_id *id) +{ + struct pata_icside_state *state; + struct pata_icside_info info; + void __iomem *idmem; + int ret; + + ret = ecard_request_resources(ec); + if (ret) + goto out; + + state = devm_kzalloc(&ec->dev, sizeof(*state), GFP_KERNEL); + if (!state) { + ret = -ENOMEM; + goto release; + } + + state->type = ICS_TYPE_NOTYPE; + state->dma = NO_DMA; + + idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); + if (idmem) { + unsigned int type; + + type = readb(idmem + ICS_IDENT_OFFSET) & 1; + type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1; + type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2; + type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3; + ecardm_iounmap(ec, idmem); + + state->type = type; + } + + memset(&info, 0, sizeof(info)); + info.state = state; + info.ec = ec; + + switch (state->type) { + case ICS_TYPE_A3IN: + dev_warn(&ec->dev, "A3IN unsupported\n"); + ret = -ENODEV; + break; + + case ICS_TYPE_A3USER: + dev_warn(&ec->dev, "A3USER unsupported\n"); + ret = -ENODEV; + break; + + case ICS_TYPE_V5: + ret = pata_icside_register_v5(&info); + break; + + case ICS_TYPE_V6: + ret = pata_icside_register_v6(&info); + break; + + default: + dev_warn(&ec->dev, "unknown interface type\n"); + ret = -ENODEV; + break; + } + + if (ret == 0) + ret = pata_icside_add_ports(&info); + + if (ret == 0) + goto out; + + release: + ecard_release_resources(ec); + out: + return ret; +} + +static void pata_icside_shutdown(struct expansion_card *ec) +{ + struct ata_host *host = ecard_get_drvdata(ec); + unsigned long flags; + + /* + * Disable interrupts from this card. We need to do + * this before disabling EASI since we may be accessing + * this register via that region. + */ + local_irq_save(flags); + ec->ops->irqdisable(ec, ec->irq); + local_irq_restore(flags); + + /* + * Reset the ROM pointer so that we can read the ROM + * after a soft reboot. This also disables access to + * the IDE taskfile via the EASI region. + */ + if (host) { + struct pata_icside_state *state = host->private_data; + if (state->ioc_base) + writeb(0, state->ioc_base); + } +} + +static void pata_icside_remove(struct expansion_card *ec) +{ + struct ata_host *host = ecard_get_drvdata(ec); + struct pata_icside_state *state = host->private_data; + + ata_host_detach(host); + + pata_icside_shutdown(ec); + + /* + * don't NULL out the drvdata - devres/libata wants it + * to free the ata_host structure. + */ + if (state->dma != NO_DMA) + free_dma(state->dma); + + ecard_release_resources(ec); +} + +static const struct ecard_id pata_icside_ids[] = { + { MANU_ICS, PROD_ICS_IDE }, + { MANU_ICS2, PROD_ICS2_IDE }, + { 0xffff, 0xffff } +}; + +static struct ecard_driver pata_icside_driver = { + .probe = pata_icside_probe, + .remove = pata_icside_remove, + .shutdown = pata_icside_shutdown, + .id_table = pata_icside_ids, + .drv = { + .name = DRV_NAME, + }, +}; + +static int __init pata_icside_init(void) +{ + return ecard_register_driver(&pata_icside_driver); +} + +static void __exit pata_icside_exit(void) +{ + ecard_remove_driver(&pata_icside_driver); +} + +MODULE_AUTHOR("Russell King "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("ICS PATA driver"); + +module_init(pata_icside_init); +module_exit(pata_icside_exit); diff --git a/drivers/ata/pata_imx.c b/drivers/ata/pata_imx.c new file mode 100644 index 000000000..139d20778 --- /dev/null +++ b/drivers/ata/pata_imx.c @@ -0,0 +1,252 @@ +/* + * Freescale iMX PATA driver + * + * Copyright (C) 2011 Arnaud Patard + * + * Based on pata_platform - Copyright (C) 2006 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * TODO: + * - dmaengine support + * - check if timing stuff needed + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_imx" + +#define PATA_IMX_ATA_CONTROL 0x24 +#define PATA_IMX_ATA_CTRL_FIFO_RST_B (1<<7) +#define PATA_IMX_ATA_CTRL_ATA_RST_B (1<<6) +#define PATA_IMX_ATA_CTRL_IORDY_EN (1<<0) +#define PATA_IMX_ATA_INT_EN 0x2C +#define PATA_IMX_ATA_INTR_ATA_INTRQ2 (1<<3) +#define PATA_IMX_DRIVE_DATA 0xA0 +#define PATA_IMX_DRIVE_CONTROL 0xD8 + +struct pata_imx_priv { + struct clk *clk; + /* timings/interrupt/control regs */ + void __iomem *host_regs; + u32 ata_ctl; +}; + +static int pata_imx_set_mode(struct ata_link *link, struct ata_device **unused) +{ + struct ata_device *dev; + struct ata_port *ap = link->ap; + struct pata_imx_priv *priv = ap->host->private_data; + u32 val; + + ata_for_each_dev(dev, link, ENABLED) { + dev->pio_mode = dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + + val = __raw_readl(priv->host_regs + PATA_IMX_ATA_CONTROL); + if (ata_pio_need_iordy(dev)) + val |= PATA_IMX_ATA_CTRL_IORDY_EN; + else + val &= ~PATA_IMX_ATA_CTRL_IORDY_EN; + __raw_writel(val, priv->host_regs + PATA_IMX_ATA_CONTROL); + + ata_dev_info(dev, "configured for PIO\n"); + } + return 0; +} + +static struct scsi_host_template pata_imx_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations pata_imx_port_ops = { + .inherits = &ata_sff_port_ops, + .sff_data_xfer = ata_sff_data_xfer_noirq, + .cable_detect = ata_cable_unknown, + .set_mode = pata_imx_set_mode, +}; + +static void pata_imx_setup_port(struct ata_ioports *ioaddr) +{ + /* Fixup the port shift for platforms that need it */ + ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << 2); + ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << 2); + ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << 2); + ioaddr->nsect_addr = ioaddr->cmd_addr + (ATA_REG_NSECT << 2); + ioaddr->lbal_addr = ioaddr->cmd_addr + (ATA_REG_LBAL << 2); + ioaddr->lbam_addr = ioaddr->cmd_addr + (ATA_REG_LBAM << 2); + ioaddr->lbah_addr = ioaddr->cmd_addr + (ATA_REG_LBAH << 2); + ioaddr->device_addr = ioaddr->cmd_addr + (ATA_REG_DEVICE << 2); + ioaddr->status_addr = ioaddr->cmd_addr + (ATA_REG_STATUS << 2); + ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << 2); +} + +static int pata_imx_probe(struct platform_device *pdev) +{ + struct ata_host *host; + struct ata_port *ap; + struct pata_imx_priv *priv; + int irq = 0; + struct resource *io_res; + int ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + priv = devm_kzalloc(&pdev->dev, + sizeof(struct pata_imx_priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(priv->clk)) { + dev_err(&pdev->dev, "Failed to get clock\n"); + return PTR_ERR(priv->clk); + } + + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; + + host = ata_host_alloc(&pdev->dev, 1); + if (!host) { + ret = -ENOMEM; + goto err; + } + + host->private_data = priv; + ap = host->ports[0]; + + ap->ops = &pata_imx_port_ops; + ap->pio_mask = ATA_PIO0; + ap->flags |= ATA_FLAG_SLAVE_POSS; + + io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->host_regs = devm_ioremap_resource(&pdev->dev, io_res); + if (IS_ERR(priv->host_regs)) { + ret = PTR_ERR(priv->host_regs); + goto err; + } + + ap->ioaddr.cmd_addr = priv->host_regs + PATA_IMX_DRIVE_DATA; + ap->ioaddr.ctl_addr = priv->host_regs + PATA_IMX_DRIVE_CONTROL; + + ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; + + pata_imx_setup_port(&ap->ioaddr); + + ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", + (unsigned long long)io_res->start + PATA_IMX_DRIVE_DATA, + (unsigned long long)io_res->start + PATA_IMX_DRIVE_CONTROL); + + /* deassert resets */ + __raw_writel(PATA_IMX_ATA_CTRL_FIFO_RST_B | + PATA_IMX_ATA_CTRL_ATA_RST_B, + priv->host_regs + PATA_IMX_ATA_CONTROL); + /* enable interrupts */ + __raw_writel(PATA_IMX_ATA_INTR_ATA_INTRQ2, + priv->host_regs + PATA_IMX_ATA_INT_EN); + + /* activate */ + ret = ata_host_activate(host, irq, ata_sff_interrupt, 0, + &pata_imx_sht); + + if (ret) + goto err; + + return 0; +err: + clk_disable_unprepare(priv->clk); + + return ret; +} + +static int pata_imx_remove(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + struct pata_imx_priv *priv = host->private_data; + + ata_host_detach(host); + + __raw_writel(0, priv->host_regs + PATA_IMX_ATA_INT_EN); + + clk_disable_unprepare(priv->clk); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int pata_imx_suspend(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct pata_imx_priv *priv = host->private_data; + int ret; + + ret = ata_host_suspend(host, PMSG_SUSPEND); + if (!ret) { + __raw_writel(0, priv->host_regs + PATA_IMX_ATA_INT_EN); + priv->ata_ctl = + __raw_readl(priv->host_regs + PATA_IMX_ATA_CONTROL); + clk_disable_unprepare(priv->clk); + } + + return ret; +} + +static int pata_imx_resume(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct pata_imx_priv *priv = host->private_data; + + int ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; + + __raw_writel(priv->ata_ctl, priv->host_regs + PATA_IMX_ATA_CONTROL); + + __raw_writel(PATA_IMX_ATA_INTR_ATA_INTRQ2, + priv->host_regs + PATA_IMX_ATA_INT_EN); + + ata_host_resume(host); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pata_imx_pm_ops, pata_imx_suspend, pata_imx_resume); + +static const struct of_device_id imx_pata_dt_ids[] = { + { + .compatible = "fsl,imx27-pata", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, imx_pata_dt_ids); + +static struct platform_driver pata_imx_driver = { + .probe = pata_imx_probe, + .remove = pata_imx_remove, + .driver = { + .name = DRV_NAME, + .of_match_table = imx_pata_dt_ids, + .pm = &pata_imx_pm_ops, + }, +}; + +module_platform_driver(pata_imx_driver); + +MODULE_AUTHOR("Arnaud Patard "); +MODULE_DESCRIPTION("low-level driver for iMX PATA"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c new file mode 100644 index 000000000..994f168b5 --- /dev/null +++ b/drivers/ata/pata_isapnp.c @@ -0,0 +1,135 @@ + +/* + * pata-isapnp.c - ISA PnP PATA controller driver. + * Copyright 2005/2006 Red Hat Inc, all rights reserved. + * + * Based in part on ide-pnp.c by Andrey Panin + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_isapnp" +#define DRV_VERSION "0.2.5" + +static struct scsi_host_template isapnp_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations isapnp_port_ops = { + .inherits = &ata_sff_port_ops, + .cable_detect = ata_cable_40wire, +}; + +static struct ata_port_operations isapnp_noalt_port_ops = { + .inherits = &ata_sff_port_ops, + .cable_detect = ata_cable_40wire, + /* No altstatus so we don't want to use the lost interrupt poll */ + .lost_interrupt = ATA_OP_NULL, +}; + +/** + * isapnp_init_one - attach an isapnp interface + * @idev: PnP device + * @dev_id: matching detect line + * + * Register an ISA bus IDE interface. Such interfaces are PIO 0 and + * non shared IRQ. + */ + +static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev_id) +{ + struct ata_host *host; + struct ata_port *ap; + void __iomem *cmd_addr, *ctl_addr; + int irq = 0; + irq_handler_t handler = NULL; + + if (pnp_port_valid(idev, 0) == 0) + return -ENODEV; + + if (pnp_irq_valid(idev, 0)) { + irq = pnp_irq(idev, 0); + handler = ata_sff_interrupt; + } + + /* allocate host */ + host = ata_host_alloc(&idev->dev, 1); + if (!host) + return -ENOMEM; + + /* acquire resources and fill host */ + cmd_addr = devm_ioport_map(&idev->dev, pnp_port_start(idev, 0), 8); + if (!cmd_addr) + return -ENOMEM; + + ap = host->ports[0]; + + ap->ops = &isapnp_noalt_port_ops; + ap->pio_mask = ATA_PIO0; + ap->flags |= ATA_FLAG_SLAVE_POSS; + + ap->ioaddr.cmd_addr = cmd_addr; + + if (pnp_port_valid(idev, 1)) { + ctl_addr = devm_ioport_map(&idev->dev, + pnp_port_start(idev, 1), 1); + ap->ioaddr.altstatus_addr = ctl_addr; + ap->ioaddr.ctl_addr = ctl_addr; + ap->ops = &isapnp_port_ops; + } + + ata_sff_std_ports(&ap->ioaddr); + + ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", + (unsigned long long)pnp_port_start(idev, 0), + (unsigned long long)pnp_port_start(idev, 1)); + + /* activate */ + return ata_host_activate(host, irq, handler, 0, + &isapnp_sht); +} + +/** + * isapnp_remove_one - unplug an isapnp interface + * @idev: PnP device + * + * Remove a previously configured PnP ATA port. Called only on module + * unload events as the core does not currently deal with ISAPnP docking. + */ + +static void isapnp_remove_one(struct pnp_dev *idev) +{ + struct device *dev = &idev->dev; + struct ata_host *host = dev_get_drvdata(dev); + + ata_host_detach(host); +} + +static struct pnp_device_id isapnp_devices[] = { + /* Generic ESDI/IDE/ATA compatible hard disk controller */ + {.id = "PNP0600", .driver_data = 0}, + {.id = ""} +}; + +MODULE_DEVICE_TABLE(pnp, isapnp_devices); + +static struct pnp_driver isapnp_driver = { + .name = DRV_NAME, + .id_table = isapnp_devices, + .probe = isapnp_init_one, + .remove = isapnp_remove_one, +}; + +module_pnp_driver(isapnp_driver); +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for ISA PnP ATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c new file mode 100644 index 000000000..4f97d1e52 --- /dev/null +++ b/drivers/ata/pata_it8213.c @@ -0,0 +1,298 @@ +/* + * pata_it8213.c - iTE Tech. Inc. IT8213 PATA driver + * + * The IT8213 is a very Intel ICH like device for timing purposes, having + * a similar register layout and the same split clock arrangement. Cable + * detection is different, and it does not have slave channels or all the + * clutter of later ICH/SATA setups. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_it8213" +#define DRV_VERSION "0.0.3" + +/** + * it8213_pre_reset - probe begin + * @link: link + * @deadline: deadline jiffies for the operation + * + * Filter out ports by the enable bits before doing the normal reset + * and probe. + */ + +static int it8213_pre_reset(struct ata_link *link, unsigned long deadline) +{ + static const struct pci_bits it8213_enable_bits[] = { + { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ + }; + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + if (!pci_test_config_bits(pdev, &it8213_enable_bits[ap->port_no])) + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + +/** + * it8213_cable_detect - check for 40/80 pin + * @ap: Port + * + * Perform cable detection for the 8213 ATA interface. This is + * different to the PIIX arrangement + */ + +static int it8213_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 tmp; + pci_read_config_byte(pdev, 0x42, &tmp); + if (tmp & 2) /* The initial docs are incorrect */ + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + +/** + * it8213_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device whose timings we are configuring + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned int master_port = ap->port_no ? 0x42 : 0x40; + u16 master_data; + int control = 0; + + /* + * See Intel Document 298600-004 for the timing programing rules + * for PIIX/ICH. The 8213 is a clone so very similar + */ + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + if (pio > 1) + control |= 1; /* TIME */ + if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */ + control |= 2; /* IE */ + /* Bit 2 is set for ATAPI on the IT8213 - reverse of ICH/PIIX */ + if (adev->class != ATA_DEV_ATA) + control |= 4; /* PPE */ + + pci_read_config_word(dev, master_port, &master_data); + + /* Set PPE, IE, and TIME as appropriate */ + if (adev->devno == 0) { + master_data &= 0xCCF0; + master_data |= control; + master_data |= (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } else { + u8 slave_data; + + master_data &= 0xFF0F; + master_data |= (control << 4); + + /* Slave timing in separate register */ + pci_read_config_byte(dev, 0x44, &slave_data); + slave_data &= 0xF0; + slave_data |= (timings[pio][0] << 2) | timings[pio][1]; + pci_write_config_byte(dev, 0x44, slave_data); + } + + master_data |= 0x4000; /* Ensure SITRE is set */ + pci_write_config_word(dev, master_port, master_data); +} + +/** + * it8213_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * This device is basically an ICH alike. + * + * LOCKING: + * None (inherited from caller). + */ + +static void it8213_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u16 master_data; + u8 speed = adev->dma_mode; + int devid = adev->devno; + u8 udma_enable; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + pci_read_config_word(dev, 0x40, &master_data); + pci_read_config_byte(dev, 0x48, &udma_enable); + + if (speed >= XFER_UDMA_0) { + unsigned int udma = adev->dma_mode - XFER_UDMA_0; + u16 udma_timing; + u16 ideconf; + int u_clock, u_speed; + + /* Clocks follow the PIIX style */ + u_speed = min(2 - (udma & 1), udma); + if (udma > 4) + u_clock = 0x1000; /* 100Mhz */ + else if (udma > 2) + u_clock = 1; /* 66Mhz */ + else + u_clock = 0; /* 33Mhz */ + + udma_enable |= (1 << devid); + + /* Load the UDMA cycle time */ + pci_read_config_word(dev, 0x4A, &udma_timing); + udma_timing &= ~(3 << (4 * devid)); + udma_timing |= u_speed << (4 * devid); + pci_write_config_word(dev, 0x4A, udma_timing); + + /* Load the clock selection */ + pci_read_config_word(dev, 0x54, &ideconf); + ideconf &= ~(0x1001 << devid); + ideconf |= u_clock << devid; + pci_write_config_word(dev, 0x54, ideconf); + } else { + /* + * MWDMA is driven by the PIO timings. We must also enable + * IORDY unconditionally along with TIME1. PPE has already + * been set when the PIO timing was set. + */ + unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; + unsigned int control; + u8 slave_data; + static const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + + control = 3; /* IORDY|TIME1 */ + + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO into PIO0 */ + + if (adev->pio_mode < needed_pio[mwdma]) + /* Enable DMA timing only */ + control |= 8; /* PIO cycles in PIO0 */ + + if (devid) { /* Slave */ + master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */ + master_data |= control << 4; + pci_read_config_byte(dev, 0x44, &slave_data); + slave_data &= 0xF0; + /* Load the matching timing */ + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); + pci_write_config_byte(dev, 0x44, slave_data); + } else { /* Master */ + master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY + and master timing bits */ + master_data |= control; + master_data |= + (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } + udma_enable &= ~(1 << devid); + pci_write_config_word(dev, 0x40, master_data); + } + pci_write_config_byte(dev, 0x48, udma_enable); +} + +static struct scsi_host_template it8213_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + + +static struct ata_port_operations it8213_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = it8213_cable_detect, + .set_piomode = it8213_set_piomode, + .set_dmamode = it8213_set_dmamode, + .prereset = it8213_pre_reset, +}; + + +/** + * it8213_init_one - Register 8213 ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in it8213_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .udma_mask = ATA_UDMA6, + .port_ops = &it8213_ops, + }; + /* Current IT8213 stuff is single port */ + const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + return ata_pci_bmdma_init_one(pdev, ppi, &it8213_sht, NULL, 0); +} + +static const struct pci_device_id it8213_pci_tbl[] = { + { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8213), }, + + { } /* terminate list */ +}; + +static struct pci_driver it8213_pci_driver = { + .name = DRV_NAME, + .id_table = it8213_pci_tbl, + .probe = it8213_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(it8213_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for the ITE 8213"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, it8213_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c new file mode 100644 index 000000000..a5088ecb3 --- /dev/null +++ b/drivers/ata/pata_it821x.c @@ -0,0 +1,983 @@ +/* + * pata_it821x.c - IT821x PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * (C) 2007 Bartlomiej Zolnierkiewicz + * + * based upon + * + * it821x.c + * + * linux/drivers/ide/pci/it821x.c Version 0.09 December 2004 + * + * Copyright (C) 2004 Red Hat + * + * May be copied or modified under the terms of the GNU General Public License + * Based in part on the ITE vendor provided SCSI driver. + * + * Documentation available from IT8212F_V04.pdf + * http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91 + * Some other documents are NDA. + * + * The ITE8212 isn't exactly a standard IDE controller. It has two + * modes. In pass through mode then it is an IDE controller. In its smart + * mode its actually quite a capable hardware raid controller disguised + * as an IDE controller. Smart mode only understands DMA read/write and + * identify, none of the fancier commands apply. The IT8211 is identical + * in other respects but lacks the raid mode. + * + * Errata: + * o Rev 0x10 also requires master/slave hold the same DMA timings and + * cannot do ATAPI MWDMA. + * o The identify data for raid volumes lacks CHS info (technically ok) + * but also fails to set the LBA28 and other bits. We fix these in + * the IDE probe quirk code. + * o If you write LBA48 sized I/O's (ie > 256 sector) in smart mode + * raid then the controller firmware dies + * o Smart mode without RAID doesn't clear all the necessary identify + * bits to reduce the command set to the one used + * + * This has a few impacts on the driver + * - In pass through mode we do all the work you would expect + * - In smart mode the clocking set up is done by the controller generally + * but we must watch the other limits and filter. + * - There are a few extra vendor commands that actually talk to the + * controller but only work PIO with no IRQ. + * + * Vendor areas of the identify block in smart mode are used for the + * timing and policy set up. Each HDD in raid mode also has a serial + * block on the disk. The hardware extra commands are get/set chip status, + * rebuild, get rebuild status. + * + * In Linux the driver supports pass through mode as if the device was + * just another IDE controller. If the smart mode is running then + * volumes are managed by the controller firmware and each IDE "disk" + * is a raid volume. Even more cute - the controller can do automated + * hotplug and rebuild. + * + * The pass through controller itself is a little demented. It has a + * flaw that it has a single set of PIO/MWDMA timings per channel so + * non UDMA devices restrict each others performance. It also has a + * single clock source per channel so mixed UDMA100/133 performance + * isn't perfect and we have to pick a clock. Thankfully none of this + * matters in smart mode. ATAPI DMA is not currently supported. + * + * It seems the smart mode is a win for RAID1/RAID10 but otherwise not. + * + * TODO + * - ATAPI and other speed filtering + * - RAID configuration ioctls + */ + +#include +#include +#include +#include +#include +#include +#include +#include + + +#define DRV_NAME "pata_it821x" +#define DRV_VERSION "0.4.2" + +struct it821x_dev +{ + unsigned int smart:1, /* Are we in smart raid mode */ + timing10:1; /* Rev 0x10 */ + u8 clock_mode; /* 0, ATA_50 or ATA_66 */ + u8 want[2][2]; /* Mode/Pri log for master slave */ + /* We need these for switching the clock when DMA goes on/off + The high byte is the 66Mhz timing */ + u16 pio[2]; /* Cached PIO values */ + u16 mwdma[2]; /* Cached MWDMA values */ + u16 udma[2]; /* Cached UDMA values (per drive) */ + u16 last_device; /* Master or slave loaded ? */ +}; + +#define ATA_66 0 +#define ATA_50 1 +#define ATA_ANY 2 + +#define UDMA_OFF 0 +#define MWDMA_OFF 0 + +/* + * We allow users to force the card into non raid mode without + * flashing the alternative BIOS. This is also necessary right now + * for embedded platforms that cannot run a PC BIOS but are using this + * device. + */ + +static int it8212_noraid; + +/** + * it821x_program - program the PIO/MWDMA registers + * @ap: ATA port + * @adev: Device to program + * @timing: Timing value (66Mhz in top 8bits, 50 in the low 8) + * + * Program the PIO/MWDMA timing for this channel according to the + * current clock. These share the same register so are managed by + * the DMA start/stop sequence as with the old driver. + */ + +static void it821x_program(struct ata_port *ap, struct ata_device *adev, u16 timing) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct it821x_dev *itdev = ap->private_data; + int channel = ap->port_no; + u8 conf; + + /* Program PIO/MWDMA timing bits */ + if (itdev->clock_mode == ATA_66) + conf = timing >> 8; + else + conf = timing & 0xFF; + pci_write_config_byte(pdev, 0x54 + 4 * channel, conf); +} + + +/** + * it821x_program_udma - program the UDMA registers + * @ap: ATA port + * @adev: ATA device to update + * @timing: Timing bits. Top 8 are for 66Mhz bottom for 50Mhz + * + * Program the UDMA timing for this drive according to the + * current clock. Handles the dual clocks and also knows about + * the errata on the 0x10 revision. The UDMA errata is partly handled + * here and partly in start_dma. + */ + +static void it821x_program_udma(struct ata_port *ap, struct ata_device *adev, u16 timing) +{ + struct it821x_dev *itdev = ap->private_data; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int channel = ap->port_no; + int unit = adev->devno; + u8 conf; + + /* Program UDMA timing bits */ + if (itdev->clock_mode == ATA_66) + conf = timing >> 8; + else + conf = timing & 0xFF; + if (itdev->timing10 == 0) + pci_write_config_byte(pdev, 0x56 + 4 * channel + unit, conf); + else { + /* Early revision must be programmed for both together */ + pci_write_config_byte(pdev, 0x56 + 4 * channel, conf); + pci_write_config_byte(pdev, 0x56 + 4 * channel + 1, conf); + } +} + +/** + * it821x_clock_strategy + * @ap: ATA interface + * @adev: ATA device being updated + * + * Select between the 50 and 66Mhz base clocks to get the best + * results for this interface. + */ + +static void it821x_clock_strategy(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct it821x_dev *itdev = ap->private_data; + u8 unit = adev->devno; + struct ata_device *pair = ata_dev_pair(adev); + + int clock, altclock; + u8 v; + int sel = 0; + + /* Look for the most wanted clocking */ + if (itdev->want[0][0] > itdev->want[1][0]) { + clock = itdev->want[0][1]; + altclock = itdev->want[1][1]; + } else { + clock = itdev->want[1][1]; + altclock = itdev->want[0][1]; + } + + /* Master doesn't care does the slave ? */ + if (clock == ATA_ANY) + clock = altclock; + + /* Nobody cares - keep the same clock */ + if (clock == ATA_ANY) + return; + /* No change */ + if (clock == itdev->clock_mode) + return; + + /* Load this into the controller */ + if (clock == ATA_66) + itdev->clock_mode = ATA_66; + else { + itdev->clock_mode = ATA_50; + sel = 1; + } + pci_read_config_byte(pdev, 0x50, &v); + v &= ~(1 << (1 + ap->port_no)); + v |= sel << (1 + ap->port_no); + pci_write_config_byte(pdev, 0x50, v); + + /* + * Reprogram the UDMA/PIO of the pair drive for the switch + * MWDMA will be dealt with by the dma switcher + */ + if (pair && itdev->udma[1-unit] != UDMA_OFF) { + it821x_program_udma(ap, pair, itdev->udma[1-unit]); + it821x_program(ap, pair, itdev->pio[1-unit]); + } + /* + * Reprogram the UDMA/PIO of our drive for the switch. + * MWDMA will be dealt with by the dma switcher + */ + if (itdev->udma[unit] != UDMA_OFF) { + it821x_program_udma(ap, adev, itdev->udma[unit]); + it821x_program(ap, adev, itdev->pio[unit]); + } +} + +/** + * it821x_passthru_set_piomode - set PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Configure for PIO mode. This is complicated as the register is + * shared by PIO and MWDMA and for both channels. + */ + +static void it821x_passthru_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + /* Spec says 89 ref driver uses 88 */ + static const u16 pio[] = { 0xAA88, 0xA382, 0xA181, 0x3332, 0x3121 }; + static const u8 pio_want[] = { ATA_66, ATA_66, ATA_66, ATA_66, ATA_ANY }; + + struct it821x_dev *itdev = ap->private_data; + int unit = adev->devno; + int mode_wanted = adev->pio_mode - XFER_PIO_0; + + /* We prefer 66Mhz clock for PIO 0-3, don't care for PIO4 */ + itdev->want[unit][1] = pio_want[mode_wanted]; + itdev->want[unit][0] = 1; /* PIO is lowest priority */ + itdev->pio[unit] = pio[mode_wanted]; + it821x_clock_strategy(ap, adev); + it821x_program(ap, adev, itdev->pio[unit]); +} + +/** + * it821x_passthru_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Set up the DMA modes. The actions taken depend heavily on the mode + * to use. If UDMA is used as is hopefully the usual case then the + * timing register is private and we need only consider the clock. If + * we are using MWDMA then we have to manage the setting ourself as + * we switch devices and mode. + */ + +static void it821x_passthru_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u16 dma[] = { 0x8866, 0x3222, 0x3121 }; + static const u8 mwdma_want[] = { ATA_ANY, ATA_66, ATA_ANY }; + static const u16 udma[] = { 0x4433, 0x4231, 0x3121, 0x2121, 0x1111, 0x2211, 0x1111 }; + static const u8 udma_want[] = { ATA_ANY, ATA_50, ATA_ANY, ATA_66, ATA_66, ATA_50, ATA_66 }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct it821x_dev *itdev = ap->private_data; + int channel = ap->port_no; + int unit = adev->devno; + u8 conf; + + if (adev->dma_mode >= XFER_UDMA_0) { + int mode_wanted = adev->dma_mode - XFER_UDMA_0; + + itdev->want[unit][1] = udma_want[mode_wanted]; + itdev->want[unit][0] = 3; /* UDMA is high priority */ + itdev->mwdma[unit] = MWDMA_OFF; + itdev->udma[unit] = udma[mode_wanted]; + if (mode_wanted >= 5) + itdev->udma[unit] |= 0x8080; /* UDMA 5/6 select on */ + + /* UDMA on. Again revision 0x10 must do the pair */ + pci_read_config_byte(pdev, 0x50, &conf); + if (itdev->timing10) + conf &= channel ? 0x9F: 0xE7; + else + conf &= ~ (1 << (3 + 2 * channel + unit)); + pci_write_config_byte(pdev, 0x50, conf); + it821x_clock_strategy(ap, adev); + it821x_program_udma(ap, adev, itdev->udma[unit]); + } else { + int mode_wanted = adev->dma_mode - XFER_MW_DMA_0; + + itdev->want[unit][1] = mwdma_want[mode_wanted]; + itdev->want[unit][0] = 2; /* MWDMA is low priority */ + itdev->mwdma[unit] = dma[mode_wanted]; + itdev->udma[unit] = UDMA_OFF; + + /* UDMA bits off - Revision 0x10 do them in pairs */ + pci_read_config_byte(pdev, 0x50, &conf); + if (itdev->timing10) + conf |= channel ? 0x60: 0x18; + else + conf |= 1 << (3 + 2 * channel + unit); + pci_write_config_byte(pdev, 0x50, conf); + it821x_clock_strategy(ap, adev); + } +} + +/** + * it821x_passthru_dma_start - DMA start callback + * @qc: Command in progress + * + * Usually drivers set the DMA timing at the point the set_dmamode call + * is made. IT821x however requires we load new timings on the + * transitions in some cases. + */ + +static void it821x_passthru_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct it821x_dev *itdev = ap->private_data; + int unit = adev->devno; + + if (itdev->mwdma[unit] != MWDMA_OFF) + it821x_program(ap, adev, itdev->mwdma[unit]); + else if (itdev->udma[unit] != UDMA_OFF && itdev->timing10) + it821x_program_udma(ap, adev, itdev->udma[unit]); + ata_bmdma_start(qc); +} + +/** + * it821x_passthru_dma_stop - DMA stop callback + * @qc: ATA command + * + * We loaded new timings in dma_start, as a result we need to restore + * the PIO timings in dma_stop so that the next command issue gets the + * right clock values. + */ + +static void it821x_passthru_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct it821x_dev *itdev = ap->private_data; + int unit = adev->devno; + + ata_bmdma_stop(qc); + if (itdev->mwdma[unit] != MWDMA_OFF) + it821x_program(ap, adev, itdev->pio[unit]); +} + + +/** + * it821x_passthru_dev_select - Select master/slave + * @ap: ATA port + * @device: Device number (not pointer) + * + * Device selection hook. If necessary perform clock switching + */ + +static void it821x_passthru_dev_select(struct ata_port *ap, + unsigned int device) +{ + struct it821x_dev *itdev = ap->private_data; + if (itdev && device != itdev->last_device) { + struct ata_device *adev = &ap->link.device[device]; + it821x_program(ap, adev, itdev->pio[adev->devno]); + itdev->last_device = device; + } + ata_sff_dev_select(ap, device); +} + +/** + * it821x_smart_qc_issue - wrap qc issue prot + * @qc: command + * + * Wrap the command issue sequence for the IT821x. We need to + * perform out own device selection timing loads before the + * usual happenings kick off + */ + +static unsigned int it821x_smart_qc_issue(struct ata_queued_cmd *qc) +{ + switch(qc->tf.command) + { + /* Commands the firmware supports */ + case ATA_CMD_READ: + case ATA_CMD_READ_EXT: + case ATA_CMD_WRITE: + case ATA_CMD_WRITE_EXT: + case ATA_CMD_PIO_READ: + case ATA_CMD_PIO_READ_EXT: + case ATA_CMD_PIO_WRITE: + case ATA_CMD_PIO_WRITE_EXT: + case ATA_CMD_READ_MULTI: + case ATA_CMD_READ_MULTI_EXT: + case ATA_CMD_WRITE_MULTI: + case ATA_CMD_WRITE_MULTI_EXT: + case ATA_CMD_ID_ATA: + case ATA_CMD_INIT_DEV_PARAMS: + case 0xFC: /* Internal 'report rebuild state' */ + /* Arguably should just no-op this one */ + case ATA_CMD_SET_FEATURES: + return ata_bmdma_qc_issue(qc); + } + printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command); + return AC_ERR_DEV; +} + +/** + * it821x_passthru_qc_issue - wrap qc issue prot + * @qc: command + * + * Wrap the command issue sequence for the IT821x. We need to + * perform out own device selection timing loads before the + * usual happenings kick off + */ + +static unsigned int it821x_passthru_qc_issue(struct ata_queued_cmd *qc) +{ + it821x_passthru_dev_select(qc->ap, qc->dev->devno); + return ata_bmdma_qc_issue(qc); +} + +/** + * it821x_smart_set_mode - mode setting + * @link: interface to set up + * @unused: device that failed (error only) + * + * Use a non standard set_mode function. We don't want to be tuned. + * The BIOS configured everything. Our job is not to fiddle. We + * read the dma enabled bits from the PCI configuration of the device + * and respect them. + */ + +static int it821x_smart_set_mode(struct ata_link *link, struct ata_device **unused) +{ + struct ata_device *dev; + + ata_for_each_dev(dev, link, ENABLED) { + /* We don't really care */ + dev->pio_mode = XFER_PIO_0; + dev->dma_mode = XFER_MW_DMA_0; + /* We do need the right mode information for DMA or PIO + and this comes from the current configuration flags */ + if (ata_id_has_dma(dev->id)) { + ata_dev_info(dev, "configured for DMA\n"); + dev->xfer_mode = XFER_MW_DMA_0; + dev->xfer_shift = ATA_SHIFT_MWDMA; + dev->flags &= ~ATA_DFLAG_PIO; + } else { + ata_dev_info(dev, "configured for PIO\n"); + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + } + } + return 0; +} + +/** + * it821x_dev_config - Called each device identify + * @adev: Device that has just been identified + * + * Perform the initial setup needed for each device that is chip + * special. In our case we need to lock the sector count to avoid + * blowing the brains out of the firmware with large LBA48 requests + * + */ + +static void it821x_dev_config(struct ata_device *adev) +{ + unsigned char model_num[ATA_ID_PROD_LEN + 1]; + + ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num)); + + if (adev->max_sectors > 255) + adev->max_sectors = 255; + + if (strstr(model_num, "Integrated Technology Express")) { + /* RAID mode */ + ata_dev_info(adev, "%sRAID%d volume", + adev->id[147] ? "Bootable " : "", + adev->id[129]); + if (adev->id[129] != 1) + pr_cont("(%dK stripe)", adev->id[146]); + pr_cont("\n"); + } + /* This is a controller firmware triggered funny, don't + report the drive faulty! */ + adev->horkage &= ~ATA_HORKAGE_DIAGNOSTIC; + /* No HPA in 'smart' mode */ + adev->horkage |= ATA_HORKAGE_BROKEN_HPA; +} + +/** + * it821x_read_id - Hack identify data up + * @adev: device to read + * @tf: proposed taskfile + * @id: buffer for returned ident data + * + * Query the devices on this firmware driven port and slightly + * mash the identify data to stop us and common tools trying to + * use features not firmware supported. The firmware itself does + * some masking (eg SMART) but not enough. + */ + +static unsigned int it821x_read_id(struct ata_device *adev, + struct ata_taskfile *tf, u16 *id) +{ + unsigned int err_mask; + unsigned char model_num[ATA_ID_PROD_LEN + 1]; + + err_mask = ata_do_dev_read_id(adev, tf, id); + if (err_mask) + return err_mask; + ata_id_c_string(id, model_num, ATA_ID_PROD, sizeof(model_num)); + + id[83] &= ~(1 << 12); /* Cache flush is firmware handled */ + id[83] &= ~(1 << 13); /* Ditto for LBA48 flushes */ + id[84] &= ~(1 << 6); /* No FUA */ + id[85] &= ~(1 << 10); /* No HPA */ + id[76] = 0; /* No NCQ/AN etc */ + + if (strstr(model_num, "Integrated Technology Express")) { + /* Set feature bits the firmware neglects */ + id[49] |= 0x0300; /* LBA, DMA */ + id[83] &= 0x7FFF; + id[83] |= 0x4400; /* Word 83 is valid and LBA48 */ + id[86] |= 0x0400; /* LBA48 on */ + id[ATA_ID_MAJOR_VER] |= 0x1F; + /* Clear the serial number because it's different each boot + which breaks validation on resume */ + memset(&id[ATA_ID_SERNO], 0x20, ATA_ID_SERNO_LEN); + } + return err_mask; +} + +/** + * it821x_check_atapi_dma - ATAPI DMA handler + * @qc: Command we are about to issue + * + * Decide if this ATAPI command can be issued by DMA on this + * controller. Return 0 if it can be. + */ + +static int it821x_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct it821x_dev *itdev = ap->private_data; + + /* Only use dma for transfers to/from the media. */ + if (ata_qc_raw_nbytes(qc) < 2048) + return -EOPNOTSUPP; + + /* No ATAPI DMA in smart mode */ + if (itdev->smart) + return -EOPNOTSUPP; + /* No ATAPI DMA on rev 10 */ + if (itdev->timing10) + return -EOPNOTSUPP; + /* Cool */ + return 0; +} + +/** + * it821x_display_disk - display disk setup + * @n: Device number + * @buf: Buffer block from firmware + * + * Produce a nice informative display of the device setup as provided + * by the firmware. + */ + +static void it821x_display_disk(int n, u8 *buf) +{ + unsigned char id[41]; + int mode = 0; + char *mtype = ""; + char mbuf[8]; + char *cbl = "(40 wire cable)"; + + static const char *types[5] = { + "RAID0", "RAID1", "RAID 0+1", "JBOD", "DISK" + }; + + if (buf[52] > 4) /* No Disk */ + return; + + ata_id_c_string((u16 *)buf, id, 0, 41); + + if (buf[51]) { + mode = ffs(buf[51]); + mtype = "UDMA"; + } else if (buf[49]) { + mode = ffs(buf[49]); + mtype = "MWDMA"; + } + + if (buf[76]) + cbl = ""; + + if (mode) + snprintf(mbuf, 8, "%5s%d", mtype, mode - 1); + else + strcpy(mbuf, "PIO"); + if (buf[52] == 4) + printk(KERN_INFO "%d: %-6s %-8s %s %s\n", + n, mbuf, types[buf[52]], id, cbl); + else + printk(KERN_INFO "%d: %-6s %-8s Volume: %1d %s %s\n", + n, mbuf, types[buf[52]], buf[53], id, cbl); + if (buf[125] < 100) + printk(KERN_INFO "%d: Rebuilding: %d%%\n", n, buf[125]); +} + +/** + * it821x_firmware_command - issue firmware command + * @ap: IT821x port to interrogate + * @cmd: command + * @len: length + * + * Issue firmware commands expecting data back from the controller. We + * use this to issue commands that do not go via the normal paths. Other + * commands such as 0xFC can be issued normally. + */ + +static u8 *it821x_firmware_command(struct ata_port *ap, u8 cmd, int len) +{ + u8 status; + int n = 0; + u16 *buf = kmalloc(len, GFP_KERNEL); + if (buf == NULL) { + printk(KERN_ERR "it821x_firmware_command: Out of memory\n"); + return NULL; + } + /* This isn't quite a normal ATA command as we are talking to the + firmware not the drives */ + ap->ctl |= ATA_NIEN; + iowrite8(ap->ctl, ap->ioaddr.ctl_addr); + ata_wait_idle(ap); + iowrite8(ATA_DEVICE_OBS, ap->ioaddr.device_addr); + iowrite8(cmd, ap->ioaddr.command_addr); + udelay(1); + /* This should be almost immediate but a little paranoia goes a long + way. */ + while(n++ < 10) { + status = ioread8(ap->ioaddr.status_addr); + if (status & ATA_ERR) { + kfree(buf); + printk(KERN_ERR "it821x_firmware_command: rejected\n"); + return NULL; + } + if (status & ATA_DRQ) { + ioread16_rep(ap->ioaddr.data_addr, buf, len/2); + return (u8 *)buf; + } + mdelay(1); + } + kfree(buf); + printk(KERN_ERR "it821x_firmware_command: timeout\n"); + return NULL; +} + +/** + * it821x_probe_firmware - firmware reporting/setup + * @ap: IT821x port being probed + * + * Probe the firmware of the controller by issuing firmware command + * 0xFA and analysing the returned data. + */ + +static void it821x_probe_firmware(struct ata_port *ap) +{ + u8 *buf; + int i; + + /* This is a bit ugly as we can't just issue a task file to a device + as this is controller magic */ + + buf = it821x_firmware_command(ap, 0xFA, 512); + + if (buf != NULL) { + printk(KERN_INFO "pata_it821x: Firmware %02X/%02X/%02X%02X\n", + buf[505], + buf[506], + buf[507], + buf[508]); + for (i = 0; i < 4; i++) + it821x_display_disk(i, buf + 128 * i); + kfree(buf); + } +} + + + +/** + * it821x_port_start - port setup + * @ap: ATA port being set up + * + * The it821x needs to maintain private data structures and also to + * use the standard PCI interface which lacks support for this + * functionality. We instead set up the private data on the port + * start hook, and tear it down on port stop + */ + +static int it821x_port_start(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct it821x_dev *itdev; + u8 conf; + + int ret = ata_bmdma_port_start(ap); + if (ret < 0) + return ret; + + itdev = devm_kzalloc(&pdev->dev, sizeof(struct it821x_dev), GFP_KERNEL); + if (itdev == NULL) + return -ENOMEM; + ap->private_data = itdev; + + pci_read_config_byte(pdev, 0x50, &conf); + + if (conf & 1) { + itdev->smart = 1; + /* Long I/O's although allowed in LBA48 space cause the + onboard firmware to enter the twighlight zone */ + /* No ATAPI DMA in this mode either */ + if (ap->port_no == 0) + it821x_probe_firmware(ap); + } + /* Pull the current clocks from 0x50 */ + if (conf & (1 << (1 + ap->port_no))) + itdev->clock_mode = ATA_50; + else + itdev->clock_mode = ATA_66; + + itdev->want[0][1] = ATA_ANY; + itdev->want[1][1] = ATA_ANY; + itdev->last_device = -1; + + if (pdev->revision == 0x10) { + itdev->timing10 = 1; + /* Need to disable ATAPI DMA for this case */ + if (!itdev->smart) + printk(KERN_WARNING DRV_NAME": Revision 0x10, workarounds activated.\n"); + } + + return 0; +} + +/** + * it821x_rdc_cable - Cable detect for RDC1010 + * @ap: port we are checking + * + * Return the RDC1010 cable type. Unlike the IT821x we know how to do + * this and can do host side cable detect + */ + +static int it821x_rdc_cable(struct ata_port *ap) +{ + u16 r40; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_word(pdev, 0x40, &r40); + if (r40 & (1 << (2 + ap->port_no))) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + +static struct scsi_host_template it821x_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations it821x_smart_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .check_atapi_dma= it821x_check_atapi_dma, + .qc_issue = it821x_smart_qc_issue, + + .cable_detect = ata_cable_80wire, + .set_mode = it821x_smart_set_mode, + .dev_config = it821x_dev_config, + .read_id = it821x_read_id, + + .port_start = it821x_port_start, +}; + +static struct ata_port_operations it821x_passthru_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .check_atapi_dma= it821x_check_atapi_dma, + .sff_dev_select = it821x_passthru_dev_select, + .bmdma_start = it821x_passthru_bmdma_start, + .bmdma_stop = it821x_passthru_bmdma_stop, + .qc_issue = it821x_passthru_qc_issue, + + .cable_detect = ata_cable_unknown, + .set_piomode = it821x_passthru_set_piomode, + .set_dmamode = it821x_passthru_set_dmamode, + + .port_start = it821x_port_start, +}; + +static struct ata_port_operations it821x_rdc_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .check_atapi_dma= it821x_check_atapi_dma, + .sff_dev_select = it821x_passthru_dev_select, + .bmdma_start = it821x_passthru_bmdma_start, + .bmdma_stop = it821x_passthru_bmdma_stop, + .qc_issue = it821x_passthru_qc_issue, + + .cable_detect = it821x_rdc_cable, + .set_piomode = it821x_passthru_set_piomode, + .set_dmamode = it821x_passthru_set_dmamode, + + .port_start = it821x_port_start, +}; + +static void it821x_disable_raid(struct pci_dev *pdev) +{ + /* Neither the RDC nor the IT8211 */ + if (pdev->vendor != PCI_VENDOR_ID_ITE || + pdev->device != PCI_DEVICE_ID_ITE_8212) + return; + + /* Reset local CPU, and set BIOS not ready */ + pci_write_config_byte(pdev, 0x5E, 0x01); + + /* Set to bypass mode, and reset PCI bus */ + pci_write_config_byte(pdev, 0x50, 0x00); + pci_write_config_word(pdev, PCI_COMMAND, + PCI_COMMAND_PARITY | PCI_COMMAND_IO | + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + pci_write_config_word(pdev, 0x40, 0xA0F3); + + pci_write_config_dword(pdev,0x4C, 0x02040204); + pci_write_config_byte(pdev, 0x42, 0x36); + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x20); +} + + +static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + u8 conf; + + static const struct ata_port_info info_smart = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &it821x_smart_port_ops + }; + static const struct ata_port_info info_passthru = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &it821x_passthru_port_ops + }; + static const struct ata_port_info info_rdc = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &it821x_rdc_port_ops + }; + static const struct ata_port_info info_rdc_11 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + /* No UDMA */ + .port_ops = &it821x_rdc_port_ops + }; + + const struct ata_port_info *ppi[] = { NULL, NULL }; + static char *mode[2] = { "pass through", "smart" }; + int rc; + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + if (pdev->vendor == PCI_VENDOR_ID_RDC) { + /* Deal with Vortex86SX */ + if (pdev->revision == 0x11) + ppi[0] = &info_rdc_11; + else + ppi[0] = &info_rdc; + } else { + /* Force the card into bypass mode if so requested */ + if (it8212_noraid) { + printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n"); + it821x_disable_raid(pdev); + } + pci_read_config_byte(pdev, 0x50, &conf); + conf &= 1; + + printk(KERN_INFO DRV_NAME": controller in %s mode.\n", + mode[conf]); + if (conf == 0) + ppi[0] = &info_passthru; + else + ppi[0] = &info_smart; + } + return ata_pci_bmdma_init_one(pdev, ppi, &it821x_sht, NULL, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int it821x_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + /* Resume - turn raid back off if need be */ + if (it8212_noraid) + it821x_disable_raid(pdev); + ata_host_resume(host); + return rc; +} +#endif + +static const struct pci_device_id it821x[] = { + { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), }, + { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), }, + { PCI_VDEVICE(RDC, PCI_DEVICE_ID_RDC_D1010), }, + + { }, +}; + +static struct pci_driver it821x_pci_driver = { + .name = DRV_NAME, + .id_table = it821x, + .probe = it821x_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = it821x_reinit_one, +#endif +}; + +module_pci_driver(it821x_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the IT8211/IT8212 IDE RAID controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, it821x); +MODULE_VERSION(DRV_VERSION); + +module_param_named(noraid, it8212_noraid, int, S_IRUGO); +MODULE_PARM_DESC(noraid, "Force card into bypass mode"); diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c new file mode 100644 index 000000000..abda44183 --- /dev/null +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -0,0 +1,207 @@ +/* + * ixp4xx PATA/Compact Flash driver + * Copyright (C) 2006-07 Tower Technologies + * Author: Alessandro Zummo + * + * An ATA driver to handle a Compact Flash connected + * to the ixp4xx expansion bus in TrueIDE mode. The CF + * must have it chip selects connected to two CS lines + * on the ixp4xx. In the irq is not available, you might + * want to modify both this driver and libata to run in + * polling mode. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_ixp4xx_cf" +#define DRV_VERSION "0.2" + +static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error) +{ + struct ata_device *dev; + + ata_for_each_dev(dev, link, ENABLED) { + ata_dev_info(dev, "configured for PIO0\n"); + dev->pio_mode = XFER_PIO_0; + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + } + return 0; +} + +static unsigned int ixp4xx_mmio_data_xfer(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) +{ + unsigned int i; + unsigned int words = buflen >> 1; + u16 *buf16 = (u16 *) buf; + struct ata_port *ap = dev->link->ap; + void __iomem *mmio = ap->ioaddr.data_addr; + struct ixp4xx_pata_data *data = dev_get_platdata(ap->host->dev); + + /* set the expansion bus in 16bit mode and restore + * 8 bit mode after the transaction. + */ + *data->cs0_cfg &= ~(0x01); + udelay(100); + + /* Transfer multiple of 2 bytes */ + if (rw == READ) + for (i = 0; i < words; i++) + buf16[i] = readw(mmio); + else + for (i = 0; i < words; i++) + writew(buf16[i], mmio); + + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + u16 align_buf[1] = { 0 }; + unsigned char *trailing_buf = buf + buflen - 1; + + if (rw == READ) { + align_buf[0] = readw(mmio); + memcpy(trailing_buf, align_buf, 1); + } else { + memcpy(align_buf, trailing_buf, 1); + writew(align_buf[0], mmio); + } + words++; + } + + udelay(100); + *data->cs0_cfg |= 0x01; + + return words << 1; +} + +static struct scsi_host_template ixp4xx_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations ixp4xx_port_ops = { + .inherits = &ata_sff_port_ops, + .sff_data_xfer = ixp4xx_mmio_data_xfer, + .cable_detect = ata_cable_40wire, + .set_mode = ixp4xx_set_mode, +}; + +static void ixp4xx_setup_port(struct ata_port *ap, + struct ixp4xx_pata_data *data, + unsigned long raw_cs0, unsigned long raw_cs1) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned long raw_cmd = raw_cs0; + unsigned long raw_ctl = raw_cs1 + 0x06; + + ioaddr->cmd_addr = data->cs0; + ioaddr->altstatus_addr = data->cs1 + 0x06; + ioaddr->ctl_addr = data->cs1 + 0x06; + + ata_sff_std_ports(ioaddr); + +#ifndef __ARMEB__ + + /* adjust the addresses to handle the address swizzling of the + * ixp4xx in little endian mode. + */ + + *(unsigned long *)&ioaddr->data_addr ^= 0x02; + *(unsigned long *)&ioaddr->cmd_addr ^= 0x03; + *(unsigned long *)&ioaddr->altstatus_addr ^= 0x03; + *(unsigned long *)&ioaddr->ctl_addr ^= 0x03; + *(unsigned long *)&ioaddr->error_addr ^= 0x03; + *(unsigned long *)&ioaddr->feature_addr ^= 0x03; + *(unsigned long *)&ioaddr->nsect_addr ^= 0x03; + *(unsigned long *)&ioaddr->lbal_addr ^= 0x03; + *(unsigned long *)&ioaddr->lbam_addr ^= 0x03; + *(unsigned long *)&ioaddr->lbah_addr ^= 0x03; + *(unsigned long *)&ioaddr->device_addr ^= 0x03; + *(unsigned long *)&ioaddr->status_addr ^= 0x03; + *(unsigned long *)&ioaddr->command_addr ^= 0x03; + + raw_cmd ^= 0x03; + raw_ctl ^= 0x03; +#endif + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", raw_cmd, raw_ctl); +} + +static int ixp4xx_pata_probe(struct platform_device *pdev) +{ + unsigned int irq; + struct resource *cs0, *cs1; + struct ata_host *host; + struct ata_port *ap; + struct ixp4xx_pata_data *data = dev_get_platdata(&pdev->dev); + int ret; + + cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); + cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); + + if (!cs0 || !cs1) + return -EINVAL; + + /* allocate host */ + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + return -ENOMEM; + + /* acquire resources and fill host */ + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret; + + data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000); + data->cs1 = devm_ioremap(&pdev->dev, cs1->start, 0x1000); + + if (!data->cs0 || !data->cs1) + return -ENOMEM; + + irq = platform_get_irq(pdev, 0); + if (irq) + irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); + + /* Setup expansion bus chip selects */ + *data->cs0_cfg = data->cs0_bits; + *data->cs1_cfg = data->cs1_bits; + + ap = host->ports[0]; + + ap->ops = &ixp4xx_port_ops; + ap->pio_mask = ATA_PIO4; + ap->flags |= ATA_FLAG_NO_ATAPI; + + ixp4xx_setup_port(ap, data, cs0->start, cs1->start); + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* activate host */ + return ata_host_activate(host, irq, ata_sff_interrupt, 0, &ixp4xx_sht); +} + +static struct platform_driver ixp4xx_pata_platform_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = ixp4xx_pata_probe, + .remove = ata_platform_remove_one, +}; + +module_platform_driver(ixp4xx_pata_platform_driver); + +MODULE_AUTHOR("Alessandro Zummo "); +MODULE_DESCRIPTION("low-level driver for ixp4xx Compact Flash PATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c new file mode 100644 index 000000000..47e418b8c --- /dev/null +++ b/drivers/ata/pata_jmicron.c @@ -0,0 +1,185 @@ +/* + * pata_jmicron.c - JMicron ATA driver for non AHCI mode. This drives the + * PATA port of the controller. The SATA ports are + * driven by AHCI in the usual configuration although + * this driver can handle other setups if we need it. + * + * (c) 2006 Red Hat + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_jmicron" +#define DRV_VERSION "0.1.5" + +typedef enum { + PORT_PATA0 = 0, + PORT_PATA1 = 1, + PORT_SATA = 2, +} port_type; + +/** + * jmicron_pre_reset - check for 40/80 pin + * @link: ATA link + * @deadline: deadline jiffies for the operation + * + * Perform the PATA port setup we need. + * + * On the Jmicron 361/363 there is a single PATA port that can be mapped + * either as primary or secondary (or neither). We don't do any policy + * and setup here. We assume that has been done by init_one and the + * BIOS. + */ +static int jmicron_pre_reset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 control; + u32 control5; + int port_mask = 1<< (4 * ap->port_no); + int port = ap->port_no; + port_type port_map[2]; + + /* Check if our port is enabled */ + pci_read_config_dword(pdev, 0x40, &control); + if ((control & port_mask) == 0) + return -ENOENT; + + /* There are two basic mappings. One has the two SATA ports merged + as master/slave and the secondary as PATA, the other has only the + SATA port mapped */ + if (control & (1 << 23)) { + port_map[0] = PORT_SATA; + port_map[1] = PORT_PATA0; + } else { + port_map[0] = PORT_SATA; + port_map[1] = PORT_SATA; + } + + /* The 365/366 may have this bit set to map the second PATA port + as the internal primary channel */ + pci_read_config_dword(pdev, 0x80, &control5); + if (control5 & (1<<24)) + port_map[0] = PORT_PATA1; + + /* The two ports may then be logically swapped by the firmware */ + if (control & (1 << 22)) + port = port ^ 1; + + /* + * Now we know which physical port we are talking about we can + * actually do our cable checking etc. Thankfully we don't need + * to do the plumbing for other cases. + */ + switch (port_map[port]) { + case PORT_PATA0: + if ((control & (1 << 5)) == 0) + return -ENOENT; + if (control & (1 << 3)) /* 40/80 pin primary */ + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + break; + case PORT_PATA1: + /* Bit 21 is set if the port is enabled */ + if ((control5 & (1 << 21)) == 0) + return -ENOENT; + if (control5 & (1 << 19)) /* 40/80 pin secondary */ + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + break; + case PORT_SATA: + ap->cbl = ATA_CBL_SATA; + break; + } + return ata_sff_prereset(link, deadline); +} + +/* No PIO or DMA methods needed for this device */ + +static struct scsi_host_template jmicron_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations jmicron_ops = { + .inherits = &ata_bmdma_port_ops, + .prereset = jmicron_pre_reset, +}; + + +/** + * jmicron_init_one - Register Jmicron ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in jmicron_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + + .port_ops = &jmicron_ops, + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + + /* + * The JMicron chip 361/363 contains one SATA controller and one + * PATA controller,for powering on these both controllers, we must + * follow the sequence one by one, otherwise one of them can not be + * powered on successfully, so here we disable the async suspend + * method for these chips. + */ + if (pdev->vendor == PCI_VENDOR_ID_JMICRON && + (pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 || + pdev->device == PCI_DEVICE_ID_JMICRON_JMB361)) + device_disable_async_suspend(&pdev->dev); + + return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0); +} + +static const struct pci_device_id jmicron_pci_tbl[] = { + { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 0 }, + { } /* terminate list */ +}; + +static struct pci_driver jmicron_pci_driver = { + .name = DRV_NAME, + .id_table = jmicron_pci_tbl, + .probe = jmicron_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(jmicron_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for Jmicron PATA ports"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, jmicron_pci_tbl); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c new file mode 100644 index 000000000..bce2a8ca4 --- /dev/null +++ b/drivers/ata/pata_legacy.c @@ -0,0 +1,1276 @@ +/* + * pata-legacy.c - Legacy port PATA/SATA controller driver. + * Copyright 2005/2006 Red Hat, all rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * An ATA driver for the legacy ATA ports. + * + * Data Sources: + * Opti 82C465/82C611 support: Data sheets at opti-inc.com + * HT6560 series: + * Promise 20230/20620: + * http://www.ryston.cz/petr/vlb/pdc20230b.html + * http://www.ryston.cz/petr/vlb/pdc20230c.html + * http://www.ryston.cz/petr/vlb/pdc20630.html + * QDI65x0: + * http://www.ryston.cz/petr/vlb/qd6500.html + * http://www.ryston.cz/petr/vlb/qd6580.html + * + * QDI65x0 probe code based on drivers/ide/legacy/qd65xx.c + * Rewritten from the work of Colten Edwards by + * Samuel Thibault + * + * Unsupported but docs exist: + * Appian/Adaptec AIC25VL01/Cirrus Logic PD7220 + * + * This driver handles legacy (that is "ISA/VLB side") IDE ports found + * on PC class systems. There are three hybrid devices that are exceptions + * The Cyrix 5510/5520 where a pre SFF ATA device is on the bridge and + * the MPIIX where the tuning is PCI side but the IDE is "ISA side". + * + * Specific support is included for the ht6560a/ht6560b/opti82c611a/ + * opti82c465mv/promise 20230c/20630/qdi65x0/winbond83759A + * + * Support for the Winbond 83759A when operating in advanced mode. + * Multichip mode is not currently supported. + * + * Use the autospeed and pio_mask options with: + * Appian ADI/2 aka CLPD7220 or AIC25VL01. + * Use the jumpers, autospeed and set pio_mask to the mode on the jumpers with + * Goldstar GM82C711, PIC-1288A-125, UMC 82C871F, Winbond W83759, + * Winbond W83759A, Promise PDC20230-B + * + * For now use autospeed and pio_mask as above with the W83759A. This may + * change. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_legacy" +#define DRV_VERSION "0.6.5" + +#define NR_HOST 6 + +static int all; +module_param(all, int, 0444); +MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)"); + +enum controller { + BIOS = 0, + SNOOP = 1, + PDC20230 = 2, + HT6560A = 3, + HT6560B = 4, + OPTI611A = 5, + OPTI46X = 6, + QDI6500 = 7, + QDI6580 = 8, + QDI6580DP = 9, /* Dual channel mode is different */ + W83759A = 10, + + UNKNOWN = -1 +}; + +struct legacy_data { + unsigned long timing; + u8 clock[2]; + u8 last; + int fast; + enum controller type; + struct platform_device *platform_dev; +}; + +struct legacy_probe { + unsigned char *name; + unsigned long port; + unsigned int irq; + unsigned int slot; + enum controller type; + unsigned long private; +}; + +struct legacy_controller { + const char *name; + struct ata_port_operations *ops; + unsigned int pio_mask; + unsigned int flags; + unsigned int pflags; + int (*setup)(struct platform_device *, struct legacy_probe *probe, + struct legacy_data *data); +}; + +static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 }; + +static struct legacy_probe probe_list[NR_HOST]; +static struct legacy_data legacy_data[NR_HOST]; +static struct ata_host *legacy_host[NR_HOST]; +static int nr_legacy_host; + + +static int probe_all; /* Set to check all ISA port ranges */ +static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */ +static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */ +static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */ +static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */ +static int autospeed; /* Chip present which snoops speed changes */ +static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */ +static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */ + +/* Set to probe QDI controllers */ +#ifdef CONFIG_PATA_QDI_MODULE +static int qdi = 1; +#else +static int qdi; +#endif + +#ifdef CONFIG_PATA_WINBOND_VLB_MODULE +static int winbond = 1; /* Set to probe Winbond controllers, + give I/O port if non standard */ +#else +static int winbond; /* Set to probe Winbond controllers, + give I/O port if non standard */ +#endif + +/** + * legacy_probe_add - Add interface to probe list + * @port: Controller port + * @irq: IRQ number + * @type: Controller type + * @private: Controller specific info + * + * Add an entry into the probe list for ATA controllers. This is used + * to add the default ISA slots and then to build up the table + * further according to other ISA/VLB/Weird device scans + * + * An I/O port list is used to keep ordering stable and sane, as we + * don't have any good way to talk about ordering otherwise + */ + +static int legacy_probe_add(unsigned long port, unsigned int irq, + enum controller type, unsigned long private) +{ + struct legacy_probe *lp = &probe_list[0]; + int i; + struct legacy_probe *free = NULL; + + for (i = 0; i < NR_HOST; i++) { + if (lp->port == 0 && free == NULL) + free = lp; + /* Matching port, or the correct slot for ordering */ + if (lp->port == port || legacy_port[i] == port) { + free = lp; + break; + } + lp++; + } + if (free == NULL) { + printk(KERN_ERR "pata_legacy: Too many interfaces.\n"); + return -1; + } + /* Fill in the entry for later probing */ + free->port = port; + free->irq = irq; + free->type = type; + free->private = private; + return 0; +} + + +/** + * legacy_set_mode - mode setting + * @link: IDE link + * @unused: Device that failed when error is returned + * + * Use a non standard set_mode function. We don't want to be tuned. + * + * The BIOS configured everything. Our job is not to fiddle. Just use + * whatever PIO the hardware is using and leave it at that. When we + * get some kind of nice user driven API for control then we can + * expand on this as per hdparm in the base kernel. + */ + +static int legacy_set_mode(struct ata_link *link, struct ata_device **unused) +{ + struct ata_device *dev; + + ata_for_each_dev(dev, link, ENABLED) { + ata_dev_info(dev, "configured for PIO\n"); + dev->pio_mode = XFER_PIO_0; + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + } + return 0; +} + +static struct scsi_host_template legacy_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static const struct ata_port_operations legacy_base_port_ops = { + .inherits = &ata_sff_port_ops, + .cable_detect = ata_cable_40wire, +}; + +/* + * These ops are used if the user indicates the hardware + * snoops the commands to decide on the mode and handles the + * mode selection "magically" itself. Several legacy controllers + * do this. The mode range can be set if it is not 0x1F by setting + * pio_mask as well. + */ + +static struct ata_port_operations simple_port_ops = { + .inherits = &legacy_base_port_ops, + .sff_data_xfer = ata_sff_data_xfer_noirq, +}; + +static struct ata_port_operations legacy_port_ops = { + .inherits = &legacy_base_port_ops, + .sff_data_xfer = ata_sff_data_xfer_noirq, + .set_mode = legacy_set_mode, +}; + +/* + * Promise 20230C and 20620 support + * + * This controller supports PIO0 to PIO2. We set PIO timings + * conservatively to allow for 50MHz Vesa Local Bus. The 20620 DMA + * support is weird being DMA to controller and PIO'd to the host + * and not supported. + */ + +static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + int tries = 5; + int pio = adev->pio_mode - XFER_PIO_0; + u8 rt; + unsigned long flags; + + /* Safe as UP only. Force I/Os to occur together */ + + local_irq_save(flags); + + /* Unlock the control interface */ + do { + inb(0x1F5); + outb(inb(0x1F2) | 0x80, 0x1F2); + inb(0x1F2); + inb(0x3F6); + inb(0x3F6); + inb(0x1F2); + inb(0x1F2); + } + while ((inb(0x1F2) & 0x80) && --tries); + + local_irq_restore(flags); + + outb(inb(0x1F4) & 0x07, 0x1F4); + + rt = inb(0x1F3); + rt &= 0x07 << (3 * adev->devno); + if (pio) + rt |= (1 + 3 * pio) << (3 * adev->devno); + + udelay(100); + outb(inb(0x1F2) | 0x01, 0x1F2); + udelay(100); + inb(0x1F5); + +} + +static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) +{ + int slop = buflen & 3; + struct ata_port *ap = dev->link->ap; + + /* 32bit I/O capable *and* we need to write a whole number of dwords */ + if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3) + && (ap->pflags & ATA_PFLAG_PIO32)) { + unsigned long flags; + + local_irq_save(flags); + + /* Perform the 32bit I/O synchronization sequence */ + ioread8(ap->ioaddr.nsect_addr); + ioread8(ap->ioaddr.nsect_addr); + ioread8(ap->ioaddr.nsect_addr); + + /* Now the data */ + if (rw == READ) + ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + else + iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + + if (unlikely(slop)) { + __le32 pad; + if (rw == READ) { + pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); + memcpy(buf + buflen - slop, &pad, slop); + } else { + memcpy(&pad, buf + buflen - slop, slop); + iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); + } + buflen += 4 - slop; + } + local_irq_restore(flags); + } else + buflen = ata_sff_data_xfer_noirq(dev, buf, buflen, rw); + + return buflen; +} + +static struct ata_port_operations pdc20230_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = pdc20230_set_piomode, + .sff_data_xfer = pdc_data_xfer_vlb, +}; + +/* + * Holtek 6560A support + * + * This controller supports PIO0 to PIO2 (no IORDY even though higher + * timings can be loaded). + */ + +static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover; + struct ata_timing t; + + /* Get the timing data in cycles. For now play safe at 50Mhz */ + ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); + + active = clamp_val(t.active, 2, 15); + recover = clamp_val(t.recover, 4, 15); + + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + + iowrite8(recover << 4 | active, ap->ioaddr.device_addr); + ioread8(ap->ioaddr.status_addr); +} + +static struct ata_port_operations ht6560a_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = ht6560a_set_piomode, +}; + +/* + * Holtek 6560B support + * + * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO + * setting unless we see an ATAPI device in which case we force it off. + * + * FIXME: need to implement 2nd channel support. + */ + +static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover; + struct ata_timing t; + + /* Get the timing data in cycles. For now play safe at 50Mhz */ + ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); + + active = clamp_val(t.active, 2, 15); + recover = clamp_val(t.recover, 2, 16) & 0x0F; + + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + + iowrite8(recover << 4 | active, ap->ioaddr.device_addr); + + if (adev->class != ATA_DEV_ATA) { + u8 rconf = inb(0x3E6); + if (rconf & 0x24) { + rconf &= ~0x24; + outb(rconf, 0x3E6); + } + } + ioread8(ap->ioaddr.status_addr); +} + +static struct ata_port_operations ht6560b_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = ht6560b_set_piomode, +}; + +/* + * Opti core chipset helpers + */ + +/** + * opti_syscfg - read OPTI chipset configuration + * @reg: Configuration register to read + * + * Returns the value of an OPTI system board configuration register. + */ + +static u8 opti_syscfg(u8 reg) +{ + unsigned long flags; + u8 r; + + /* Uniprocessor chipset and must force cycles adjancent */ + local_irq_save(flags); + outb(reg, 0x22); + r = inb(0x24); + local_irq_restore(flags); + return r; +} + +/* + * Opti 82C611A + * + * This controller supports PIO0 to PIO3. + */ + +static void opti82c611a_set_piomode(struct ata_port *ap, + struct ata_device *adev) +{ + u8 active, recover, setup; + struct ata_timing t; + struct ata_device *pair = ata_dev_pair(adev); + int clock; + int khz[4] = { 50000, 40000, 33000, 25000 }; + u8 rc; + + /* Enter configuration mode */ + ioread16(ap->ioaddr.error_addr); + ioread16(ap->ioaddr.error_addr); + iowrite8(3, ap->ioaddr.nsect_addr); + + /* Read VLB clock strapping */ + clock = 1000000000 / khz[ioread8(ap->ioaddr.lbah_addr) & 0x03]; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000); + + /* Setup timing is shared */ + if (pair) { + struct ata_timing tp; + ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000); + + ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); + } + + active = clamp_val(t.active, 2, 17) - 2; + recover = clamp_val(t.recover, 1, 16) - 1; + setup = clamp_val(t.setup, 1, 4) - 1; + + /* Select the right timing bank for write timing */ + rc = ioread8(ap->ioaddr.lbal_addr); + rc &= 0x7F; + rc |= (adev->devno << 7); + iowrite8(rc, ap->ioaddr.lbal_addr); + + /* Write the timings */ + iowrite8(active << 4 | recover, ap->ioaddr.error_addr); + + /* Select the right bank for read timings, also + load the shared timings for address */ + rc = ioread8(ap->ioaddr.device_addr); + rc &= 0xC0; + rc |= adev->devno; /* Index select */ + rc |= (setup << 4) | 0x04; + iowrite8(rc, ap->ioaddr.device_addr); + + /* Load the read timings */ + iowrite8(active << 4 | recover, ap->ioaddr.data_addr); + + /* Ensure the timing register mode is right */ + rc = ioread8(ap->ioaddr.lbal_addr); + rc &= 0x73; + rc |= 0x84; + iowrite8(rc, ap->ioaddr.lbal_addr); + + /* Exit command mode */ + iowrite8(0x83, ap->ioaddr.nsect_addr); +} + + +static struct ata_port_operations opti82c611a_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = opti82c611a_set_piomode, +}; + +/* + * Opti 82C465MV + * + * This controller supports PIO0 to PIO3. Unlike the 611A the MVB + * version is dual channel but doesn't have a lot of unique registers. + */ + +static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover, setup; + struct ata_timing t; + struct ata_device *pair = ata_dev_pair(adev); + int clock; + int khz[4] = { 50000, 40000, 33000, 25000 }; + u8 rc; + u8 sysclk; + + /* Get the clock */ + sysclk = (opti_syscfg(0xAC) & 0xC0) >> 6; /* BIOS set */ + + /* Enter configuration mode */ + ioread16(ap->ioaddr.error_addr); + ioread16(ap->ioaddr.error_addr); + iowrite8(3, ap->ioaddr.nsect_addr); + + /* Read VLB clock strapping */ + clock = 1000000000 / khz[sysclk]; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000); + + /* Setup timing is shared */ + if (pair) { + struct ata_timing tp; + ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000); + + ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); + } + + active = clamp_val(t.active, 2, 17) - 2; + recover = clamp_val(t.recover, 1, 16) - 1; + setup = clamp_val(t.setup, 1, 4) - 1; + + /* Select the right timing bank for write timing */ + rc = ioread8(ap->ioaddr.lbal_addr); + rc &= 0x7F; + rc |= (adev->devno << 7); + iowrite8(rc, ap->ioaddr.lbal_addr); + + /* Write the timings */ + iowrite8(active << 4 | recover, ap->ioaddr.error_addr); + + /* Select the right bank for read timings, also + load the shared timings for address */ + rc = ioread8(ap->ioaddr.device_addr); + rc &= 0xC0; + rc |= adev->devno; /* Index select */ + rc |= (setup << 4) | 0x04; + iowrite8(rc, ap->ioaddr.device_addr); + + /* Load the read timings */ + iowrite8(active << 4 | recover, ap->ioaddr.data_addr); + + /* Ensure the timing register mode is right */ + rc = ioread8(ap->ioaddr.lbal_addr); + rc &= 0x73; + rc |= 0x84; + iowrite8(rc, ap->ioaddr.lbal_addr); + + /* Exit command mode */ + iowrite8(0x83, ap->ioaddr.nsect_addr); + + /* We need to know this for quad device on the MVB */ + ap->host->private_data = ap; +} + +/** + * opt82c465mv_qc_issue - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings. The + * MVB has a single set of timing registers and these are shared + * across channels. As there are two registers we really ought to + * track the last two used values as a sort of register window. For + * now we just reload on a channel switch. On the single channel + * setup this condition never fires so we do nothing extra. + * + * FIXME: dual channel needs ->serialize support + */ + +static unsigned int opti82c46x_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + /* If timings are set and for the wrong channel (2nd test is + due to a libata shortcoming and will eventually go I hope) */ + if (ap->host->private_data != ap->host + && ap->host->private_data != NULL) + opti82c46x_set_piomode(ap, adev); + + return ata_sff_qc_issue(qc); +} + +static struct ata_port_operations opti82c46x_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = opti82c46x_set_piomode, + .qc_issue = opti82c46x_qc_issue, +}; + +/** + * qdi65x0_set_piomode - PIO setup for QDI65x0 + * @ap: Port + * @adev: Device + * + * In single channel mode the 6580 has one clock per device and we can + * avoid the requirement to clock switch. We also have to load the timing + * into the right clock according to whether we are master or slave. + * + * In dual channel mode the 6580 has one clock per channel and we have + * to software clockswitch in qc_issue. + */ + +static void qdi65x0_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct legacy_data *ld_qdi = ap->host->private_data; + int active, recovery; + u8 timing; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + if (ld_qdi->fast) { + active = 8 - clamp_val(t.active, 1, 8); + recovery = 18 - clamp_val(t.recover, 3, 18); + } else { + active = 9 - clamp_val(t.active, 2, 9); + recovery = 15 - clamp_val(t.recover, 0, 15); + } + timing = (recovery << 4) | active | 0x08; + ld_qdi->clock[adev->devno] = timing; + + if (ld_qdi->type == QDI6580) + outb(timing, ld_qdi->timing + 2 * adev->devno); + else + outb(timing, ld_qdi->timing + 2 * ap->port_no); + + /* Clear the FIFO */ + if (ld_qdi->type != QDI6500 && adev->class != ATA_DEV_ATA) + outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3); +} + +/** + * qdi_qc_issue - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings. + */ + +static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct legacy_data *ld_qdi = ap->host->private_data; + + if (ld_qdi->clock[adev->devno] != ld_qdi->last) { + if (adev->pio_mode) { + ld_qdi->last = ld_qdi->clock[adev->devno]; + outb(ld_qdi->clock[adev->devno], ld_qdi->timing + + 2 * ap->port_no); + } + } + return ata_sff_qc_issue(qc); +} + +static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int rw) +{ + struct ata_port *ap = adev->link->ap; + int slop = buflen & 3; + + if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3) + && (ap->pflags & ATA_PFLAG_PIO32)) { + if (rw == WRITE) + iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + else + ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + + if (unlikely(slop)) { + __le32 pad; + if (rw == WRITE) { + memcpy(&pad, buf + buflen - slop, slop); + iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); + } else { + pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); + memcpy(buf + buflen - slop, &pad, slop); + } + } + return (buflen + 3) & ~3; + } else + return ata_sff_data_xfer(adev, buf, buflen, rw); +} + +static int qdi_port(struct platform_device *dev, + struct legacy_probe *lp, struct legacy_data *ld) +{ + if (devm_request_region(&dev->dev, lp->private, 4, "qdi") == NULL) + return -EBUSY; + ld->timing = lp->private; + return 0; +} + +static struct ata_port_operations qdi6500_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = qdi65x0_set_piomode, + .qc_issue = qdi_qc_issue, + .sff_data_xfer = vlb32_data_xfer, +}; + +static struct ata_port_operations qdi6580_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = qdi65x0_set_piomode, + .sff_data_xfer = vlb32_data_xfer, +}; + +static struct ata_port_operations qdi6580dp_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = qdi65x0_set_piomode, + .qc_issue = qdi_qc_issue, + .sff_data_xfer = vlb32_data_xfer, +}; + +static DEFINE_SPINLOCK(winbond_lock); + +static void winbond_writecfg(unsigned long port, u8 reg, u8 val) +{ + unsigned long flags; + spin_lock_irqsave(&winbond_lock, flags); + outb(reg, port + 0x01); + outb(val, port + 0x02); + spin_unlock_irqrestore(&winbond_lock, flags); +} + +static u8 winbond_readcfg(unsigned long port, u8 reg) +{ + u8 val; + + unsigned long flags; + spin_lock_irqsave(&winbond_lock, flags); + outb(reg, port + 0x01); + val = inb(port + 0x02); + spin_unlock_irqrestore(&winbond_lock, flags); + + return val; +} + +static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct legacy_data *ld_winbond = ap->host->private_data; + int active, recovery; + u8 reg; + int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2); + + reg = winbond_readcfg(ld_winbond->timing, 0x81); + + /* Get the timing data in cycles */ + if (reg & 0x40) /* Fast VLB bus, assume 50MHz */ + ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); + else + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + active = (clamp_val(t.active, 3, 17) - 1) & 0x0F; + recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F; + timing = (active << 4) | recovery; + winbond_writecfg(ld_winbond->timing, timing, reg); + + /* Load the setup timing */ + + reg = 0x35; + if (adev->class != ATA_DEV_ATA) + reg |= 0x08; /* FIFO off */ + if (!ata_pio_need_iordy(adev)) + reg |= 0x02; /* IORDY off */ + reg |= (clamp_val(t.setup, 0, 3) << 6); + winbond_writecfg(ld_winbond->timing, timing + 1, reg); +} + +static int winbond_port(struct platform_device *dev, + struct legacy_probe *lp, struct legacy_data *ld) +{ + if (devm_request_region(&dev->dev, lp->private, 4, "winbond") == NULL) + return -EBUSY; + ld->timing = lp->private; + return 0; +} + +static struct ata_port_operations winbond_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = winbond_set_piomode, + .sff_data_xfer = vlb32_data_xfer, +}; + +static struct legacy_controller controllers[] = { + {"BIOS", &legacy_port_ops, ATA_PIO4, + ATA_FLAG_NO_IORDY, 0, NULL }, + {"Snooping", &simple_port_ops, ATA_PIO4, + 0, 0, NULL }, + {"PDC20230", &pdc20230_port_ops, ATA_PIO2, + ATA_FLAG_NO_IORDY, + ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, NULL }, + {"HT6560A", &ht6560a_port_ops, ATA_PIO2, + ATA_FLAG_NO_IORDY, 0, NULL }, + {"HT6560B", &ht6560b_port_ops, ATA_PIO4, + ATA_FLAG_NO_IORDY, 0, NULL }, + {"OPTI82C611A", &opti82c611a_port_ops, ATA_PIO3, + 0, 0, NULL }, + {"OPTI82C46X", &opti82c46x_port_ops, ATA_PIO3, + 0, 0, NULL }, + {"QDI6500", &qdi6500_port_ops, ATA_PIO2, + ATA_FLAG_NO_IORDY, + ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, + {"QDI6580", &qdi6580_port_ops, ATA_PIO4, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, + {"QDI6580DP", &qdi6580dp_port_ops, ATA_PIO4, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, + {"W83759A", &winbond_port_ops, ATA_PIO4, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, + winbond_port } +}; + +/** + * probe_chip_type - Discover controller + * @probe: Probe entry to check + * + * Probe an ATA port and identify the type of controller. We don't + * check if the controller appears to be driveless at this point. + */ + +static __init int probe_chip_type(struct legacy_probe *probe) +{ + int mask = 1 << probe->slot; + + if (winbond && (probe->port == 0x1F0 || probe->port == 0x170)) { + u8 reg = winbond_readcfg(winbond, 0x81); + reg |= 0x80; /* jumpered mode off */ + winbond_writecfg(winbond, 0x81, reg); + reg = winbond_readcfg(winbond, 0x83); + reg |= 0xF0; /* local control */ + winbond_writecfg(winbond, 0x83, reg); + reg = winbond_readcfg(winbond, 0x85); + reg |= 0xF0; /* programmable timing */ + winbond_writecfg(winbond, 0x85, reg); + + reg = winbond_readcfg(winbond, 0x81); + + if (reg & mask) + return W83759A; + } + if (probe->port == 0x1F0) { + unsigned long flags; + local_irq_save(flags); + /* Probes */ + outb(inb(0x1F2) | 0x80, 0x1F2); + inb(0x1F5); + inb(0x1F2); + inb(0x3F6); + inb(0x3F6); + inb(0x1F2); + inb(0x1F2); + + if ((inb(0x1F2) & 0x80) == 0) { + /* PDC20230c or 20630 ? */ + printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller" + " detected.\n"); + udelay(100); + inb(0x1F5); + local_irq_restore(flags); + return PDC20230; + } else { + outb(0x55, 0x1F2); + inb(0x1F2); + inb(0x1F2); + if (inb(0x1F2) == 0x00) + printk(KERN_INFO "PDC20230-B VLB ATA " + "controller detected.\n"); + local_irq_restore(flags); + return BIOS; + } + } + + if (ht6560a & mask) + return HT6560A; + if (ht6560b & mask) + return HT6560B; + if (opti82c611a & mask) + return OPTI611A; + if (opti82c46x & mask) + return OPTI46X; + if (autospeed & mask) + return SNOOP; + return BIOS; +} + + +/** + * legacy_init_one - attach a legacy interface + * @pl: probe record + * + * Register an ISA bus IDE interface. Such interfaces are PIO and we + * assume do not support IRQ sharing. + */ + +static __init int legacy_init_one(struct legacy_probe *probe) +{ + struct legacy_controller *controller = &controllers[probe->type]; + int pio_modes = controller->pio_mask; + unsigned long io = probe->port; + u32 mask = (1 << probe->slot); + struct ata_port_operations *ops = controller->ops; + struct legacy_data *ld = &legacy_data[probe->slot]; + struct ata_host *host = NULL; + struct ata_port *ap; + struct platform_device *pdev; + struct ata_device *dev; + void __iomem *io_addr, *ctrl_addr; + u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY; + int ret; + + iordy |= controller->flags; + + pdev = platform_device_register_simple(DRV_NAME, probe->slot, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + ret = -EBUSY; + if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL || + devm_request_region(&pdev->dev, io + 0x0206, 1, + "pata_legacy") == NULL) + goto fail; + + ret = -ENOMEM; + io_addr = devm_ioport_map(&pdev->dev, io, 8); + ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1); + if (!io_addr || !ctrl_addr) + goto fail; + ld->type = probe->type; + if (controller->setup) + if (controller->setup(pdev, probe, ld) < 0) + goto fail; + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + goto fail; + ap = host->ports[0]; + + ap->ops = ops; + ap->pio_mask = pio_modes; + ap->flags |= ATA_FLAG_SLAVE_POSS | iordy; + ap->pflags |= controller->pflags; + ap->ioaddr.cmd_addr = io_addr; + ap->ioaddr.altstatus_addr = ctrl_addr; + ap->ioaddr.ctl_addr = ctrl_addr; + ata_sff_std_ports(&ap->ioaddr); + ap->host->private_data = ld; + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206); + + ret = ata_host_activate(host, probe->irq, ata_sff_interrupt, 0, + &legacy_sht); + if (ret) + goto fail; + async_synchronize_full(); + ld->platform_dev = pdev; + + /* Nothing found means we drop the port as its probably not there */ + + ret = -ENODEV; + ata_for_each_dev(dev, &ap->link, ALL) { + if (!ata_dev_absent(dev)) { + legacy_host[probe->slot] = host; + ld->platform_dev = pdev; + return 0; + } + } + ata_host_detach(host); +fail: + platform_device_unregister(pdev); + return ret; +} + +/** + * legacy_check_special_cases - ATA special cases + * @p: PCI device to check + * @master: set this if we find an ATA master + * @master: set this if we find an ATA secondary + * + * A small number of vendors implemented early PCI ATA interfaces + * on bridge logic without the ATA interface being PCI visible. + * Where we have a matching PCI driver we must skip the relevant + * device here. If we don't know about it then the legacy driver + * is the right driver anyway. + */ + +static void __init legacy_check_special_cases(struct pci_dev *p, int *primary, + int *secondary) +{ + /* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */ + if (p->vendor == 0x1078 && p->device == 0x0000) { + *primary = *secondary = 1; + return; + } + /* Cyrix CS5520 pre SFF MWDMA ATA on the bridge */ + if (p->vendor == 0x1078 && p->device == 0x0002) { + *primary = *secondary = 1; + return; + } + /* Intel MPIIX - PIO ATA on non PCI side of bridge */ + if (p->vendor == 0x8086 && p->device == 0x1234) { + u16 r; + pci_read_config_word(p, 0x6C, &r); + if (r & 0x8000) { + /* ATA port enabled */ + if (r & 0x4000) + *secondary = 1; + else + *primary = 1; + } + return; + } +} + +static __init void probe_opti_vlb(void) +{ + /* If an OPTI 82C46X is present find out where the channels are */ + static const char *optis[4] = { + "3/463MV", "5MV", + "5MVA", "5MVB" + }; + u8 chans = 1; + u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6; + + opti82c46x = 3; /* Assume master and slave first */ + printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", + optis[ctrl]); + if (ctrl == 3) + chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1; + ctrl = opti_syscfg(0xAC); + /* Check enabled and this port is the 465MV port. On the + MVB we may have two channels */ + if (ctrl & 8) { + if (chans == 2) { + legacy_probe_add(0x1F0, 14, OPTI46X, 0); + legacy_probe_add(0x170, 15, OPTI46X, 0); + } + if (ctrl & 4) + legacy_probe_add(0x170, 15, OPTI46X, 0); + else + legacy_probe_add(0x1F0, 14, OPTI46X, 0); + } else + legacy_probe_add(0x1F0, 14, OPTI46X, 0); +} + +static __init void qdi65_identify_port(u8 r, u8 res, unsigned long port) +{ + static const unsigned long ide_port[2] = { 0x170, 0x1F0 }; + /* Check card type */ + if ((r & 0xF0) == 0xC0) { + /* QD6500: single channel */ + if (r & 8) + /* Disabled ? */ + return; + legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01), + QDI6500, port); + } + if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) { + /* QD6580: dual channel */ + if (!request_region(port + 2 , 2, "pata_qdi")) { + release_region(port, 2); + return; + } + res = inb(port + 3); + /* Single channel mode ? */ + if (res & 1) + legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01), + QDI6580, port); + else { /* Dual channel mode */ + legacy_probe_add(0x1F0, 14, QDI6580DP, port); + /* port + 0x02, r & 0x04 */ + legacy_probe_add(0x170, 15, QDI6580DP, port + 2); + } + release_region(port + 2, 2); + } +} + +static __init void probe_qdi_vlb(void) +{ + unsigned long flags; + static const unsigned long qd_port[2] = { 0x30, 0xB0 }; + int i; + + /* + * Check each possible QD65xx base address + */ + + for (i = 0; i < 2; i++) { + unsigned long port = qd_port[i]; + u8 r, res; + + + if (request_region(port, 2, "pata_qdi")) { + /* Check for a card */ + local_irq_save(flags); + /* I have no h/w that needs this delay but it + is present in the historic code */ + r = inb(port); + udelay(1); + outb(0x19, port); + udelay(1); + res = inb(port); + udelay(1); + outb(r, port); + udelay(1); + local_irq_restore(flags); + + /* Fail */ + if (res == 0x19) { + release_region(port, 2); + continue; + } + /* Passes the presence test */ + r = inb(port + 1); + udelay(1); + /* Check port agrees with port set */ + if ((r & 2) >> 1 == i) + qdi65_identify_port(r, res, port); + release_region(port, 2); + } + } +} + +/** + * legacy_init - attach legacy interfaces + * + * Attach legacy IDE interfaces by scanning the usual IRQ/port suspects. + * Right now we do not scan the ide0 and ide1 address but should do so + * for non PCI systems or systems with no PCI IDE legacy mode devices. + * If you fix that note there are special cases to consider like VLB + * drivers and CS5510/20. + */ + +static __init int legacy_init(void) +{ + int i; + int ct = 0; + int primary = 0; + int secondary = 0; + int pci_present = 0; + struct legacy_probe *pl = &probe_list[0]; + int slot = 0; + + struct pci_dev *p = NULL; + + for_each_pci_dev(p) { + int r; + /* Check for any overlap of the system ATA mappings. Native + mode controllers stuck on these addresses or some devices + in 'raid' mode won't be found by the storage class test */ + for (r = 0; r < 6; r++) { + if (pci_resource_start(p, r) == 0x1f0) + primary = 1; + if (pci_resource_start(p, r) == 0x170) + secondary = 1; + } + /* Check for special cases */ + legacy_check_special_cases(p, &primary, &secondary); + + /* If PCI bus is present then don't probe for tertiary + legacy ports */ + pci_present = 1; + } + + if (winbond == 1) + winbond = 0x130; /* Default port, alt is 1B0 */ + + if (primary == 0 || all) + legacy_probe_add(0x1F0, 14, UNKNOWN, 0); + if (secondary == 0 || all) + legacy_probe_add(0x170, 15, UNKNOWN, 0); + + if (probe_all || !pci_present) { + /* ISA/VLB extra ports */ + legacy_probe_add(0x1E8, 11, UNKNOWN, 0); + legacy_probe_add(0x168, 10, UNKNOWN, 0); + legacy_probe_add(0x1E0, 8, UNKNOWN, 0); + legacy_probe_add(0x160, 12, UNKNOWN, 0); + } + + if (opti82c46x) + probe_opti_vlb(); + if (qdi) + probe_qdi_vlb(); + + for (i = 0; i < NR_HOST; i++, pl++) { + if (pl->port == 0) + continue; + if (pl->type == UNKNOWN) + pl->type = probe_chip_type(pl); + pl->slot = slot++; + if (legacy_init_one(pl) == 0) + ct++; + } + if (ct != 0) + return 0; + return -ENODEV; +} + +static __exit void legacy_exit(void) +{ + int i; + + for (i = 0; i < nr_legacy_host; i++) { + struct legacy_data *ld = &legacy_data[i]; + ata_host_detach(legacy_host[i]); + platform_device_unregister(ld->platform_dev); + } +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for legacy ATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("pata_qdi"); +MODULE_ALIAS("pata_winbond"); + +module_param(probe_all, int, 0); +module_param(autospeed, int, 0); +module_param(ht6560a, int, 0); +module_param(ht6560b, int, 0); +module_param(opti82c611a, int, 0); +module_param(opti82c46x, int, 0); +module_param(qdi, int, 0); +module_param(winbond, int, 0); +module_param(pio_mask, int, 0); +module_param(iordy_mask, int, 0); + +module_init(legacy_init); +module_exit(legacy_exit); diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c new file mode 100644 index 000000000..b0028588f --- /dev/null +++ b/drivers/ata/pata_macio.c @@ -0,0 +1,1421 @@ +/* + * Libata based driver for Apple "macio" family of PATA controllers + * + * Copyright 2008/2009 Benjamin Herrenschmidt, IBM Corp + * + * + * Some bits and pieces from drivers/ide/ppc/pmac.c + * + */ + +#undef DEBUG +#undef DEBUG_DMA + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#ifdef DEBUG_DMA +#define dev_dbgdma(dev, format, arg...) \ + dev_printk(KERN_DEBUG , dev , format , ## arg) +#else +#define dev_dbgdma(dev, format, arg...) \ + ({ if (0) dev_printk(KERN_DEBUG, dev, format, ##arg); 0; }) +#endif + +#define DRV_NAME "pata_macio" +#define DRV_VERSION "0.9" + +/* Models of macio ATA controller */ +enum { + controller_ohare, /* OHare based */ + controller_heathrow, /* Heathrow/Paddington */ + controller_kl_ata3, /* KeyLargo ATA-3 */ + controller_kl_ata4, /* KeyLargo ATA-4 */ + controller_un_ata6, /* UniNorth2 ATA-6 */ + controller_k2_ata6, /* K2 ATA-6 */ + controller_sh_ata6, /* Shasta ATA-6 */ +}; + +static const char* macio_ata_names[] = { + "OHare ATA", /* OHare based */ + "Heathrow ATA", /* Heathrow/Paddington */ + "KeyLargo ATA-3", /* KeyLargo ATA-3 (MDMA only) */ + "KeyLargo ATA-4", /* KeyLargo ATA-4 (UDMA/66) */ + "UniNorth ATA-6", /* UniNorth2 ATA-6 (UDMA/100) */ + "K2 ATA-6", /* K2 ATA-6 (UDMA/100) */ + "Shasta ATA-6", /* Shasta ATA-6 (UDMA/133) */ +}; + +/* + * Extra registers, both 32-bit little-endian + */ +#define IDE_TIMING_CONFIG 0x200 +#define IDE_INTERRUPT 0x300 + +/* Kauai (U2) ATA has different register setup */ +#define IDE_KAUAI_PIO_CONFIG 0x200 +#define IDE_KAUAI_ULTRA_CONFIG 0x210 +#define IDE_KAUAI_POLL_CONFIG 0x220 + +/* + * Timing configuration register definitions + */ + +/* Number of IDE_SYSCLK_NS ticks, argument is in nanoseconds */ +#define SYSCLK_TICKS(t) (((t) + IDE_SYSCLK_NS - 1) / IDE_SYSCLK_NS) +#define SYSCLK_TICKS_66(t) (((t) + IDE_SYSCLK_66_NS - 1) / IDE_SYSCLK_66_NS) +#define IDE_SYSCLK_NS 30 /* 33Mhz cell */ +#define IDE_SYSCLK_66_NS 15 /* 66Mhz cell */ + +/* 133Mhz cell, found in shasta. + * See comments about 100 Mhz Uninorth 2... + * Note that PIO_MASK and MDMA_MASK seem to overlap, that's just + * weird and I don't now why .. at this stage + */ +#define TR_133_PIOREG_PIO_MASK 0xff000fff +#define TR_133_PIOREG_MDMA_MASK 0x00fff800 +#define TR_133_UDMAREG_UDMA_MASK 0x0003ffff +#define TR_133_UDMAREG_UDMA_EN 0x00000001 + +/* 100Mhz cell, found in Uninorth 2 and K2. It appears as a pci device + * (106b/0033) on uninorth or K2 internal PCI bus and it's clock is + * controlled like gem or fw. It appears to be an evolution of keylargo + * ATA4 with a timing register extended to 2x32bits registers (one + * for PIO & MWDMA and one for UDMA, and a similar DBDMA channel. + * It has it's own local feature control register as well. + * + * After scratching my mind over the timing values, at least for PIO + * and MDMA, I think I've figured the format of the timing register, + * though I use pre-calculated tables for UDMA as usual... + */ +#define TR_100_PIO_ADDRSETUP_MASK 0xff000000 /* Size of field unknown */ +#define TR_100_PIO_ADDRSETUP_SHIFT 24 +#define TR_100_MDMA_MASK 0x00fff000 +#define TR_100_MDMA_RECOVERY_MASK 0x00fc0000 +#define TR_100_MDMA_RECOVERY_SHIFT 18 +#define TR_100_MDMA_ACCESS_MASK 0x0003f000 +#define TR_100_MDMA_ACCESS_SHIFT 12 +#define TR_100_PIO_MASK 0xff000fff +#define TR_100_PIO_RECOVERY_MASK 0x00000fc0 +#define TR_100_PIO_RECOVERY_SHIFT 6 +#define TR_100_PIO_ACCESS_MASK 0x0000003f +#define TR_100_PIO_ACCESS_SHIFT 0 + +#define TR_100_UDMAREG_UDMA_MASK 0x0000ffff +#define TR_100_UDMAREG_UDMA_EN 0x00000001 + + +/* 66Mhz cell, found in KeyLargo. Can do ultra mode 0 to 2 on + * 40 connector cable and to 4 on 80 connector one. + * Clock unit is 15ns (66Mhz) + * + * 3 Values can be programmed: + * - Write data setup, which appears to match the cycle time. They + * also call it DIOW setup. + * - Ready to pause time (from spec) + * - Address setup. That one is weird. I don't see where exactly + * it fits in UDMA cycles, I got it's name from an obscure piece + * of commented out code in Darwin. They leave it to 0, we do as + * well, despite a comment that would lead to think it has a + * min value of 45ns. + * Apple also add 60ns to the write data setup (or cycle time ?) on + * reads. + */ +#define TR_66_UDMA_MASK 0xfff00000 +#define TR_66_UDMA_EN 0x00100000 /* Enable Ultra mode for DMA */ +#define TR_66_PIO_ADDRSETUP_MASK 0xe0000000 /* Address setup */ +#define TR_66_PIO_ADDRSETUP_SHIFT 29 +#define TR_66_UDMA_RDY2PAUS_MASK 0x1e000000 /* Ready 2 pause time */ +#define TR_66_UDMA_RDY2PAUS_SHIFT 25 +#define TR_66_UDMA_WRDATASETUP_MASK 0x01e00000 /* Write data setup time */ +#define TR_66_UDMA_WRDATASETUP_SHIFT 21 +#define TR_66_MDMA_MASK 0x000ffc00 +#define TR_66_MDMA_RECOVERY_MASK 0x000f8000 +#define TR_66_MDMA_RECOVERY_SHIFT 15 +#define TR_66_MDMA_ACCESS_MASK 0x00007c00 +#define TR_66_MDMA_ACCESS_SHIFT 10 +#define TR_66_PIO_MASK 0xe00003ff +#define TR_66_PIO_RECOVERY_MASK 0x000003e0 +#define TR_66_PIO_RECOVERY_SHIFT 5 +#define TR_66_PIO_ACCESS_MASK 0x0000001f +#define TR_66_PIO_ACCESS_SHIFT 0 + +/* 33Mhz cell, found in OHare, Heathrow (& Paddington) and KeyLargo + * Can do pio & mdma modes, clock unit is 30ns (33Mhz) + * + * The access time and recovery time can be programmed. Some older + * Darwin code base limit OHare to 150ns cycle time. I decided to do + * the same here fore safety against broken old hardware ;) + * The HalfTick bit, when set, adds half a clock (15ns) to the access + * time and removes one from recovery. It's not supported on KeyLargo + * implementation afaik. The E bit appears to be set for PIO mode 0 and + * is used to reach long timings used in this mode. + */ +#define TR_33_MDMA_MASK 0x003ff800 +#define TR_33_MDMA_RECOVERY_MASK 0x001f0000 +#define TR_33_MDMA_RECOVERY_SHIFT 16 +#define TR_33_MDMA_ACCESS_MASK 0x0000f800 +#define TR_33_MDMA_ACCESS_SHIFT 11 +#define TR_33_MDMA_HALFTICK 0x00200000 +#define TR_33_PIO_MASK 0x000007ff +#define TR_33_PIO_E 0x00000400 +#define TR_33_PIO_RECOVERY_MASK 0x000003e0 +#define TR_33_PIO_RECOVERY_SHIFT 5 +#define TR_33_PIO_ACCESS_MASK 0x0000001f +#define TR_33_PIO_ACCESS_SHIFT 0 + +/* + * Interrupt register definitions. Only present on newer cells + * (Keylargo and later afaik) so we don't use it. + */ +#define IDE_INTR_DMA 0x80000000 +#define IDE_INTR_DEVICE 0x40000000 + +/* + * FCR Register on Kauai. Not sure what bit 0x4 is ... + */ +#define KAUAI_FCR_UATA_MAGIC 0x00000004 +#define KAUAI_FCR_UATA_RESET_N 0x00000002 +#define KAUAI_FCR_UATA_ENABLE 0x00000001 + + +/* Allow up to 256 DBDMA commands per xfer */ +#define MAX_DCMDS 256 + +/* Don't let a DMA segment go all the way to 64K */ +#define MAX_DBDMA_SEG 0xff00 + + +/* + * Wait 1s for disk to answer on IDE bus after a hard reset + * of the device (via GPIO/FCR). + * + * Some devices seem to "pollute" the bus even after dropping + * the BSY bit (typically some combo drives slave on the UDMA + * bus) after a hard reset. Since we hard reset all drives on + * KeyLargo ATA66, we have to keep that delay around. I may end + * up not hard resetting anymore on these and keep the delay only + * for older interfaces instead (we have to reset when coming + * from MacOS...) --BenH. + */ +#define IDE_WAKEUP_DELAY_MS 1000 + +struct pata_macio_timing; + +struct pata_macio_priv { + int kind; + int aapl_bus_id; + int mediabay : 1; + struct device_node *node; + struct macio_dev *mdev; + struct pci_dev *pdev; + struct device *dev; + int irq; + u32 treg[2][2]; + void __iomem *tfregs; + void __iomem *kauai_fcr; + struct dbdma_cmd * dma_table_cpu; + dma_addr_t dma_table_dma; + struct ata_host *host; + const struct pata_macio_timing *timings; +}; + +/* Previous variants of this driver used to calculate timings + * for various variants of the chip and use tables for others. + * + * Not only was this confusing, but in addition, it isn't clear + * whether our calculation code was correct. It didn't entirely + * match the darwin code and whatever documentation I could find + * on these cells + * + * I decided to entirely rely on a table instead for this version + * of the driver. Also, because I don't really care about derated + * modes and really old HW other than making it work, I'm not going + * to calculate / snoop timing values for something else than the + * standard modes. + */ +struct pata_macio_timing { + int mode; + u32 reg1; /* Bits to set in first timing reg */ + u32 reg2; /* Bits to set in second timing reg */ +}; + +static const struct pata_macio_timing pata_macio_ohare_timings[] = { + { XFER_PIO_0, 0x00000526, 0, }, + { XFER_PIO_1, 0x00000085, 0, }, + { XFER_PIO_2, 0x00000025, 0, }, + { XFER_PIO_3, 0x00000025, 0, }, + { XFER_PIO_4, 0x00000025, 0, }, + { XFER_MW_DMA_0, 0x00074000, 0, }, + { XFER_MW_DMA_1, 0x00221000, 0, }, + { XFER_MW_DMA_2, 0x00211000, 0, }, + { -1, 0, 0 } +}; + +static const struct pata_macio_timing pata_macio_heathrow_timings[] = { + { XFER_PIO_0, 0x00000526, 0, }, + { XFER_PIO_1, 0x00000085, 0, }, + { XFER_PIO_2, 0x00000025, 0, }, + { XFER_PIO_3, 0x00000025, 0, }, + { XFER_PIO_4, 0x00000025, 0, }, + { XFER_MW_DMA_0, 0x00074000, 0, }, + { XFER_MW_DMA_1, 0x00221000, 0, }, + { XFER_MW_DMA_2, 0x00211000, 0, }, + { -1, 0, 0 } +}; + +static const struct pata_macio_timing pata_macio_kl33_timings[] = { + { XFER_PIO_0, 0x00000526, 0, }, + { XFER_PIO_1, 0x00000085, 0, }, + { XFER_PIO_2, 0x00000025, 0, }, + { XFER_PIO_3, 0x00000025, 0, }, + { XFER_PIO_4, 0x00000025, 0, }, + { XFER_MW_DMA_0, 0x00084000, 0, }, + { XFER_MW_DMA_1, 0x00021800, 0, }, + { XFER_MW_DMA_2, 0x00011800, 0, }, + { -1, 0, 0 } +}; + +static const struct pata_macio_timing pata_macio_kl66_timings[] = { + { XFER_PIO_0, 0x0000038c, 0, }, + { XFER_PIO_1, 0x0000020a, 0, }, + { XFER_PIO_2, 0x00000127, 0, }, + { XFER_PIO_3, 0x000000c6, 0, }, + { XFER_PIO_4, 0x00000065, 0, }, + { XFER_MW_DMA_0, 0x00084000, 0, }, + { XFER_MW_DMA_1, 0x00029800, 0, }, + { XFER_MW_DMA_2, 0x00019400, 0, }, + { XFER_UDMA_0, 0x19100000, 0, }, + { XFER_UDMA_1, 0x14d00000, 0, }, + { XFER_UDMA_2, 0x10900000, 0, }, + { XFER_UDMA_3, 0x0c700000, 0, }, + { XFER_UDMA_4, 0x0c500000, 0, }, + { -1, 0, 0 } +}; + +static const struct pata_macio_timing pata_macio_kauai_timings[] = { + { XFER_PIO_0, 0x08000a92, 0, }, + { XFER_PIO_1, 0x0800060f, 0, }, + { XFER_PIO_2, 0x0800038b, 0, }, + { XFER_PIO_3, 0x05000249, 0, }, + { XFER_PIO_4, 0x04000148, 0, }, + { XFER_MW_DMA_0, 0x00618000, 0, }, + { XFER_MW_DMA_1, 0x00209000, 0, }, + { XFER_MW_DMA_2, 0x00148000, 0, }, + { XFER_UDMA_0, 0, 0x000070c1, }, + { XFER_UDMA_1, 0, 0x00005d81, }, + { XFER_UDMA_2, 0, 0x00004a61, }, + { XFER_UDMA_3, 0, 0x00003a51, }, + { XFER_UDMA_4, 0, 0x00002a31, }, + { XFER_UDMA_5, 0, 0x00002921, }, + { -1, 0, 0 } +}; + +static const struct pata_macio_timing pata_macio_shasta_timings[] = { + { XFER_PIO_0, 0x0a000c97, 0, }, + { XFER_PIO_1, 0x07000712, 0, }, + { XFER_PIO_2, 0x040003cd, 0, }, + { XFER_PIO_3, 0x0500028b, 0, }, + { XFER_PIO_4, 0x0400010a, 0, }, + { XFER_MW_DMA_0, 0x00820800, 0, }, + { XFER_MW_DMA_1, 0x0028b000, 0, }, + { XFER_MW_DMA_2, 0x001ca000, 0, }, + { XFER_UDMA_0, 0, 0x00035901, }, + { XFER_UDMA_1, 0, 0x000348b1, }, + { XFER_UDMA_2, 0, 0x00033881, }, + { XFER_UDMA_3, 0, 0x00033861, }, + { XFER_UDMA_4, 0, 0x00033841, }, + { XFER_UDMA_5, 0, 0x00033031, }, + { XFER_UDMA_6, 0, 0x00033021, }, + { -1, 0, 0 } +}; + +static const struct pata_macio_timing *pata_macio_find_timing( + struct pata_macio_priv *priv, + int mode) +{ + int i; + + for (i = 0; priv->timings[i].mode > 0; i++) { + if (priv->timings[i].mode == mode) + return &priv->timings[i]; + } + return NULL; +} + + +static void pata_macio_apply_timings(struct ata_port *ap, unsigned int device) +{ + struct pata_macio_priv *priv = ap->private_data; + void __iomem *rbase = ap->ioaddr.cmd_addr; + + if (priv->kind == controller_sh_ata6 || + priv->kind == controller_un_ata6 || + priv->kind == controller_k2_ata6) { + writel(priv->treg[device][0], rbase + IDE_KAUAI_PIO_CONFIG); + writel(priv->treg[device][1], rbase + IDE_KAUAI_ULTRA_CONFIG); + } else + writel(priv->treg[device][0], rbase + IDE_TIMING_CONFIG); +} + +static void pata_macio_dev_select(struct ata_port *ap, unsigned int device) +{ + ata_sff_dev_select(ap, device); + + /* Apply timings */ + pata_macio_apply_timings(ap, device); +} + +static void pata_macio_set_timings(struct ata_port *ap, + struct ata_device *adev) +{ + struct pata_macio_priv *priv = ap->private_data; + const struct pata_macio_timing *t; + + dev_dbg(priv->dev, "Set timings: DEV=%d,PIO=0x%x (%s),DMA=0x%x (%s)\n", + adev->devno, + adev->pio_mode, + ata_mode_string(ata_xfer_mode2mask(adev->pio_mode)), + adev->dma_mode, + ata_mode_string(ata_xfer_mode2mask(adev->dma_mode))); + + /* First clear timings */ + priv->treg[adev->devno][0] = priv->treg[adev->devno][1] = 0; + + /* Now get the PIO timings */ + t = pata_macio_find_timing(priv, adev->pio_mode); + if (t == NULL) { + dev_warn(priv->dev, "Invalid PIO timing requested: 0x%x\n", + adev->pio_mode); + t = pata_macio_find_timing(priv, XFER_PIO_0); + } + BUG_ON(t == NULL); + + /* PIO timings only ever use the first treg */ + priv->treg[adev->devno][0] |= t->reg1; + + /* Now get DMA timings */ + t = pata_macio_find_timing(priv, adev->dma_mode); + if (t == NULL || (t->reg1 == 0 && t->reg2 == 0)) { + dev_dbg(priv->dev, "DMA timing not set yet, using MW_DMA_0\n"); + t = pata_macio_find_timing(priv, XFER_MW_DMA_0); + } + BUG_ON(t == NULL); + + /* DMA timings can use both tregs */ + priv->treg[adev->devno][0] |= t->reg1; + priv->treg[adev->devno][1] |= t->reg2; + + dev_dbg(priv->dev, " -> %08x %08x\n", + priv->treg[adev->devno][0], + priv->treg[adev->devno][1]); + + /* Apply to hardware */ + pata_macio_apply_timings(ap, adev->devno); +} + +/* + * Blast some well known "safe" values to the timing registers at init or + * wakeup from sleep time, before we do real calculation + */ +static void pata_macio_default_timings(struct pata_macio_priv *priv) +{ + unsigned int value, value2 = 0; + + switch(priv->kind) { + case controller_sh_ata6: + value = 0x0a820c97; + value2 = 0x00033031; + break; + case controller_un_ata6: + case controller_k2_ata6: + value = 0x08618a92; + value2 = 0x00002921; + break; + case controller_kl_ata4: + value = 0x0008438c; + break; + case controller_kl_ata3: + value = 0x00084526; + break; + case controller_heathrow: + case controller_ohare: + default: + value = 0x00074526; + break; + } + priv->treg[0][0] = priv->treg[1][0] = value; + priv->treg[0][1] = priv->treg[1][1] = value2; +} + +static int pata_macio_cable_detect(struct ata_port *ap) +{ + struct pata_macio_priv *priv = ap->private_data; + + /* Get cable type from device-tree */ + if (priv->kind == controller_kl_ata4 || + priv->kind == controller_un_ata6 || + priv->kind == controller_k2_ata6 || + priv->kind == controller_sh_ata6) { + const char* cable = of_get_property(priv->node, "cable-type", + NULL); + struct device_node *root = of_find_node_by_path("/"); + const char *model = of_get_property(root, "model", NULL); + + if (cable && !strncmp(cable, "80-", 3)) { + /* Some drives fail to detect 80c cable in PowerBook + * These machine use proprietary short IDE cable + * anyway + */ + if (!strncmp(model, "PowerBook", 9)) + return ATA_CBL_PATA40_SHORT; + else + return ATA_CBL_PATA80; + } + } + + /* G5's seem to have incorrect cable type in device-tree. + * Let's assume they always have a 80 conductor cable, this seem to + * be always the case unless the user mucked around + */ + if (of_device_is_compatible(priv->node, "K2-UATA") || + of_device_is_compatible(priv->node, "shasta-ata")) + return ATA_CBL_PATA80; + + /* Anything else is 40 connectors */ + return ATA_CBL_PATA40; +} + +static void pata_macio_qc_prep(struct ata_queued_cmd *qc) +{ + unsigned int write = (qc->tf.flags & ATA_TFLAG_WRITE); + struct ata_port *ap = qc->ap; + struct pata_macio_priv *priv = ap->private_data; + struct scatterlist *sg; + struct dbdma_cmd *table; + unsigned int si, pi; + + dev_dbgdma(priv->dev, "%s: qc %p flags %lx, write %d dev %d\n", + __func__, qc, qc->flags, write, qc->dev->devno); + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + table = (struct dbdma_cmd *) priv->dma_table_cpu; + + pi = 0; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + u32 addr, sg_len, len; + + /* determine if physical DMA addr spans 64K boundary. + * Note h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + addr = (u32) sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + while (sg_len) { + /* table overflow should never happen */ + BUG_ON (pi++ >= MAX_DCMDS); + + len = (sg_len < MAX_DBDMA_SEG) ? sg_len : MAX_DBDMA_SEG; + table->command = cpu_to_le16(write ? OUTPUT_MORE: INPUT_MORE); + table->req_count = cpu_to_le16(len); + table->phy_addr = cpu_to_le32(addr); + table->cmd_dep = 0; + table->xfer_status = 0; + table->res_count = 0; + addr += len; + sg_len -= len; + ++table; + } + } + + /* Should never happen according to Tejun */ + BUG_ON(!pi); + + /* Convert the last command to an input/output */ + table--; + table->command = cpu_to_le16(write ? OUTPUT_LAST: INPUT_LAST); + table++; + + /* Add the stop command to the end of the list */ + memset(table, 0, sizeof(struct dbdma_cmd)); + table->command = cpu_to_le16(DBDMA_STOP); + + dev_dbgdma(priv->dev, "%s: %d DMA list entries\n", __func__, pi); +} + + +static void pata_macio_freeze(struct ata_port *ap) +{ + struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr; + + if (dma_regs) { + unsigned int timeout = 1000000; + + /* Make sure DMA controller is stopped */ + writel((RUN|PAUSE|FLUSH|WAKE|DEAD) << 16, &dma_regs->control); + while (--timeout && (readl(&dma_regs->status) & RUN)) + udelay(1); + } + + ata_sff_freeze(ap); +} + + +static void pata_macio_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pata_macio_priv *priv = ap->private_data; + struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr; + int dev = qc->dev->devno; + + dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc); + + /* Make sure DMA commands updates are visible */ + writel(priv->dma_table_dma, &dma_regs->cmdptr); + + /* On KeyLargo 66Mhz cell, we need to add 60ns to wrDataSetup on + * UDMA reads + */ + if (priv->kind == controller_kl_ata4 && + (priv->treg[dev][0] & TR_66_UDMA_EN)) { + void __iomem *rbase = ap->ioaddr.cmd_addr; + u32 reg = priv->treg[dev][0]; + + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) + reg += 0x00800000; + writel(reg, rbase + IDE_TIMING_CONFIG); + } + + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} + +static void pata_macio_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pata_macio_priv *priv = ap->private_data; + struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr; + + dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc); + + writel((RUN << 16) | RUN, &dma_regs->control); + /* Make sure it gets to the controller right now */ + (void)readl(&dma_regs->control); +} + +static void pata_macio_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pata_macio_priv *priv = ap->private_data; + struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr; + unsigned int timeout = 1000000; + + dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc); + + /* Stop the DMA engine and wait for it to full halt */ + writel (((RUN|WAKE|DEAD) << 16), &dma_regs->control); + while (--timeout && (readl(&dma_regs->status) & RUN)) + udelay(1); +} + +static u8 pata_macio_bmdma_status(struct ata_port *ap) +{ + struct pata_macio_priv *priv = ap->private_data; + struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr; + u32 dstat, rstat = ATA_DMA_INTR; + unsigned long timeout = 0; + + dstat = readl(&dma_regs->status); + + dev_dbgdma(priv->dev, "%s: dstat=%x\n", __func__, dstat); + + /* We have two things to deal with here: + * + * - The dbdma won't stop if the command was started + * but completed with an error without transferring all + * datas. This happens when bad blocks are met during + * a multi-block transfer. + * + * - The dbdma fifo hasn't yet finished flushing to + * to system memory when the disk interrupt occurs. + * + */ + + /* First check for errors */ + if ((dstat & (RUN|DEAD)) != RUN) + rstat |= ATA_DMA_ERR; + + /* If ACTIVE is cleared, the STOP command has been hit and + * the transfer is complete. If not, we have to flush the + * channel. + */ + if ((dstat & ACTIVE) == 0) + return rstat; + + dev_dbgdma(priv->dev, "%s: DMA still active, flushing...\n", __func__); + + /* If dbdma didn't execute the STOP command yet, the + * active bit is still set. We consider that we aren't + * sharing interrupts (which is hopefully the case with + * those controllers) and so we just try to flush the + * channel for pending data in the fifo + */ + udelay(1); + writel((FLUSH << 16) | FLUSH, &dma_regs->control); + for (;;) { + udelay(1); + dstat = readl(&dma_regs->status); + if ((dstat & FLUSH) == 0) + break; + if (++timeout > 1000) { + dev_warn(priv->dev, "timeout flushing DMA\n"); + rstat |= ATA_DMA_ERR; + break; + } + } + return rstat; +} + +/* port_start is when we allocate the DMA command list */ +static int pata_macio_port_start(struct ata_port *ap) +{ + struct pata_macio_priv *priv = ap->private_data; + + if (ap->ioaddr.bmdma_addr == NULL) + return 0; + + /* Allocate space for the DBDMA commands. + * + * The +2 is +1 for the stop command and +1 to allow for + * aligning the start address to a multiple of 16 bytes. + */ + priv->dma_table_cpu = + dmam_alloc_coherent(priv->dev, + (MAX_DCMDS + 2) * sizeof(struct dbdma_cmd), + &priv->dma_table_dma, GFP_KERNEL); + if (priv->dma_table_cpu == NULL) { + dev_err(priv->dev, "Unable to allocate DMA command list\n"); + ap->ioaddr.bmdma_addr = NULL; + ap->mwdma_mask = 0; + ap->udma_mask = 0; + } + return 0; +} + +static void pata_macio_irq_clear(struct ata_port *ap) +{ + struct pata_macio_priv *priv = ap->private_data; + + /* Nothing to do here */ + + dev_dbgdma(priv->dev, "%s\n", __func__); +} + +static void pata_macio_reset_hw(struct pata_macio_priv *priv, int resume) +{ + dev_dbg(priv->dev, "Enabling & resetting... \n"); + + if (priv->mediabay) + return; + + if (priv->kind == controller_ohare && !resume) { + /* The code below is having trouble on some ohare machines + * (timing related ?). Until I can put my hand on one of these + * units, I keep the old way + */ + ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, priv->node, 0, 1); + } else { + int rc; + + /* Reset and enable controller */ + rc = ppc_md.feature_call(PMAC_FTR_IDE_RESET, + priv->node, priv->aapl_bus_id, 1); + ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, + priv->node, priv->aapl_bus_id, 1); + msleep(10); + /* Only bother waiting if there's a reset control */ + if (rc == 0) { + ppc_md.feature_call(PMAC_FTR_IDE_RESET, + priv->node, priv->aapl_bus_id, 0); + msleep(IDE_WAKEUP_DELAY_MS); + } + } + + /* If resuming a PCI device, restore the config space here */ + if (priv->pdev && resume) { + int rc; + + pci_restore_state(priv->pdev); + rc = pcim_enable_device(priv->pdev); + if (rc) + dev_err(&priv->pdev->dev, + "Failed to enable device after resume (%d)\n", + rc); + else + pci_set_master(priv->pdev); + } + + /* On Kauai, initialize the FCR. We don't perform a reset, doesn't really + * seem necessary and speeds up the boot process + */ + if (priv->kauai_fcr) + writel(KAUAI_FCR_UATA_MAGIC | + KAUAI_FCR_UATA_RESET_N | + KAUAI_FCR_UATA_ENABLE, priv->kauai_fcr); +} + +/* Hook the standard slave config to fixup some HW related alignment + * restrictions + */ +static int pata_macio_slave_config(struct scsi_device *sdev) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct pata_macio_priv *priv = ap->private_data; + struct ata_device *dev; + u16 cmd; + int rc; + + /* First call original */ + rc = ata_scsi_slave_config(sdev); + if (rc) + return rc; + + /* This is lifted from sata_nv */ + dev = &ap->link.device[sdev->id]; + + /* OHare has issues with non cache aligned DMA on some chipsets */ + if (priv->kind == controller_ohare) { + blk_queue_update_dma_alignment(sdev->request_queue, 31); + blk_queue_update_dma_pad(sdev->request_queue, 31); + + /* Tell the world about it */ + ata_dev_info(dev, "OHare alignment limits applied\n"); + return 0; + } + + /* We only have issues with ATAPI */ + if (dev->class != ATA_DEV_ATAPI) + return 0; + + /* Shasta and K2 seem to have "issues" with reads ... */ + if (priv->kind == controller_sh_ata6 || priv->kind == controller_k2_ata6) { + /* Allright these are bad, apply restrictions */ + blk_queue_update_dma_alignment(sdev->request_queue, 15); + blk_queue_update_dma_pad(sdev->request_queue, 15); + + /* We enable MWI and hack cache line size directly here, this + * is specific to this chipset and not normal values, we happen + * to somewhat know what we are doing here (which is basically + * to do the same Apple does and pray they did not get it wrong :-) + */ + BUG_ON(!priv->pdev); + pci_write_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, 0x08); + pci_read_config_word(priv->pdev, PCI_COMMAND, &cmd); + pci_write_config_word(priv->pdev, PCI_COMMAND, + cmd | PCI_COMMAND_INVALIDATE); + + /* Tell the world about it */ + ata_dev_info(dev, "K2/Shasta alignment limits applied\n"); + } + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int pata_macio_do_suspend(struct pata_macio_priv *priv, pm_message_t mesg) +{ + int rc; + + /* First, core libata suspend to do most of the work */ + rc = ata_host_suspend(priv->host, mesg); + if (rc) + return rc; + + /* Restore to default timings */ + pata_macio_default_timings(priv); + + /* Mask interrupt. Not strictly necessary but old driver did + * it and I'd rather not change that here */ + disable_irq(priv->irq); + + /* The media bay will handle itself just fine */ + if (priv->mediabay) + return 0; + + /* Kauai has bus control FCRs directly here */ + if (priv->kauai_fcr) { + u32 fcr = readl(priv->kauai_fcr); + fcr &= ~(KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE); + writel(fcr, priv->kauai_fcr); + } + + /* For PCI, save state and disable DMA. No need to call + * pci_set_power_state(), the HW doesn't do D states that + * way, the platform code will take care of suspending the + * ASIC properly + */ + if (priv->pdev) { + pci_save_state(priv->pdev); + pci_disable_device(priv->pdev); + } + + /* Disable the bus on older machines and the cell on kauai */ + ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, priv->node, + priv->aapl_bus_id, 0); + + return 0; +} + +static int pata_macio_do_resume(struct pata_macio_priv *priv) +{ + /* Reset and re-enable the HW */ + pata_macio_reset_hw(priv, 1); + + /* Sanitize drive timings */ + pata_macio_apply_timings(priv->host->ports[0], 0); + + /* We want our IRQ back ! */ + enable_irq(priv->irq); + + /* Let the libata core take it from there */ + ata_host_resume(priv->host); + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static struct scsi_host_template pata_macio_sht = { + ATA_BASE_SHT(DRV_NAME), + .sg_tablesize = MAX_DCMDS, + /* We may not need that strict one */ + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = pata_macio_slave_config, +}; + +static struct ata_port_operations pata_macio_ops = { + .inherits = &ata_bmdma_port_ops, + + .freeze = pata_macio_freeze, + .set_piomode = pata_macio_set_timings, + .set_dmamode = pata_macio_set_timings, + .cable_detect = pata_macio_cable_detect, + .sff_dev_select = pata_macio_dev_select, + .qc_prep = pata_macio_qc_prep, + .bmdma_setup = pata_macio_bmdma_setup, + .bmdma_start = pata_macio_bmdma_start, + .bmdma_stop = pata_macio_bmdma_stop, + .bmdma_status = pata_macio_bmdma_status, + .port_start = pata_macio_port_start, + .sff_irq_clear = pata_macio_irq_clear, +}; + +static void pata_macio_invariants(struct pata_macio_priv *priv) +{ + const int *bidp; + + /* Identify the type of controller */ + if (of_device_is_compatible(priv->node, "shasta-ata")) { + priv->kind = controller_sh_ata6; + priv->timings = pata_macio_shasta_timings; + } else if (of_device_is_compatible(priv->node, "kauai-ata")) { + priv->kind = controller_un_ata6; + priv->timings = pata_macio_kauai_timings; + } else if (of_device_is_compatible(priv->node, "K2-UATA")) { + priv->kind = controller_k2_ata6; + priv->timings = pata_macio_kauai_timings; + } else if (of_device_is_compatible(priv->node, "keylargo-ata")) { + if (strcmp(priv->node->name, "ata-4") == 0) { + priv->kind = controller_kl_ata4; + priv->timings = pata_macio_kl66_timings; + } else { + priv->kind = controller_kl_ata3; + priv->timings = pata_macio_kl33_timings; + } + } else if (of_device_is_compatible(priv->node, "heathrow-ata")) { + priv->kind = controller_heathrow; + priv->timings = pata_macio_heathrow_timings; + } else { + priv->kind = controller_ohare; + priv->timings = pata_macio_ohare_timings; + } + + /* XXX FIXME --- setup priv->mediabay here */ + + /* Get Apple bus ID (for clock and ASIC control) */ + bidp = of_get_property(priv->node, "AAPL,bus-id", NULL); + priv->aapl_bus_id = bidp ? *bidp : 0; + + /* Fixup missing Apple bus ID in case of media-bay */ + if (priv->mediabay && bidp == 0) + priv->aapl_bus_id = 1; +} + +static void pata_macio_setup_ios(struct ata_ioports *ioaddr, + void __iomem * base, void __iomem * dma) +{ + /* cmd_addr is the base of regs for that port */ + ioaddr->cmd_addr = base; + + /* taskfile registers */ + ioaddr->data_addr = base + (ATA_REG_DATA << 4); + ioaddr->error_addr = base + (ATA_REG_ERR << 4); + ioaddr->feature_addr = base + (ATA_REG_FEATURE << 4); + ioaddr->nsect_addr = base + (ATA_REG_NSECT << 4); + ioaddr->lbal_addr = base + (ATA_REG_LBAL << 4); + ioaddr->lbam_addr = base + (ATA_REG_LBAM << 4); + ioaddr->lbah_addr = base + (ATA_REG_LBAH << 4); + ioaddr->device_addr = base + (ATA_REG_DEVICE << 4); + ioaddr->status_addr = base + (ATA_REG_STATUS << 4); + ioaddr->command_addr = base + (ATA_REG_CMD << 4); + ioaddr->altstatus_addr = base + 0x160; + ioaddr->ctl_addr = base + 0x160; + ioaddr->bmdma_addr = dma; +} + +static void pmac_macio_calc_timing_masks(struct pata_macio_priv *priv, + struct ata_port_info *pinfo) +{ + int i = 0; + + pinfo->pio_mask = 0; + pinfo->mwdma_mask = 0; + pinfo->udma_mask = 0; + + while (priv->timings[i].mode > 0) { + unsigned int mask = 1U << (priv->timings[i].mode & 0x0f); + switch(priv->timings[i].mode & 0xf0) { + case 0x00: /* PIO */ + pinfo->pio_mask |= (mask >> 8); + break; + case 0x20: /* MWDMA */ + pinfo->mwdma_mask |= mask; + break; + case 0x40: /* UDMA */ + pinfo->udma_mask |= mask; + break; + } + i++; + } + dev_dbg(priv->dev, "Supported masks: PIO=%lx, MWDMA=%lx, UDMA=%lx\n", + pinfo->pio_mask, pinfo->mwdma_mask, pinfo->udma_mask); +} + +static int pata_macio_common_init(struct pata_macio_priv *priv, + resource_size_t tfregs, + resource_size_t dmaregs, + resource_size_t fcregs, + unsigned long irq) +{ + struct ata_port_info pinfo; + const struct ata_port_info *ppi[] = { &pinfo, NULL }; + void __iomem *dma_regs = NULL; + + /* Fill up privates with various invariants collected from the + * device-tree + */ + pata_macio_invariants(priv); + + /* Make sure we have sane initial timings in the cache */ + pata_macio_default_timings(priv); + + /* Not sure what the real max is but we know it's less than 64K, let's + * use 64K minus 256 + */ + dma_set_max_seg_size(priv->dev, MAX_DBDMA_SEG); + + /* Allocate libata host for 1 port */ + memset(&pinfo, 0, sizeof(struct ata_port_info)); + pmac_macio_calc_timing_masks(priv, &pinfo); + pinfo.flags = ATA_FLAG_SLAVE_POSS; + pinfo.port_ops = &pata_macio_ops; + pinfo.private_data = priv; + + priv->host = ata_host_alloc_pinfo(priv->dev, ppi, 1); + if (priv->host == NULL) { + dev_err(priv->dev, "Failed to allocate ATA port structure\n"); + return -ENOMEM; + } + + /* Setup the private data in host too */ + priv->host->private_data = priv; + + /* Map base registers */ + priv->tfregs = devm_ioremap(priv->dev, tfregs, 0x100); + if (priv->tfregs == NULL) { + dev_err(priv->dev, "Failed to map ATA ports\n"); + return -ENOMEM; + } + priv->host->iomap = &priv->tfregs; + + /* Map DMA regs */ + if (dmaregs != 0) { + dma_regs = devm_ioremap(priv->dev, dmaregs, + sizeof(struct dbdma_regs)); + if (dma_regs == NULL) + dev_warn(priv->dev, "Failed to map ATA DMA registers\n"); + } + + /* If chip has local feature control, map those regs too */ + if (fcregs != 0) { + priv->kauai_fcr = devm_ioremap(priv->dev, fcregs, 4); + if (priv->kauai_fcr == NULL) { + dev_err(priv->dev, "Failed to map ATA FCR register\n"); + return -ENOMEM; + } + } + + /* Setup port data structure */ + pata_macio_setup_ios(&priv->host->ports[0]->ioaddr, + priv->tfregs, dma_regs); + priv->host->ports[0]->private_data = priv; + + /* hard-reset the controller */ + pata_macio_reset_hw(priv, 0); + pata_macio_apply_timings(priv->host->ports[0], 0); + + /* Enable bus master if necessary */ + if (priv->pdev && dma_regs) + pci_set_master(priv->pdev); + + dev_info(priv->dev, "Activating pata-macio chipset %s, Apple bus ID %d\n", + macio_ata_names[priv->kind], priv->aapl_bus_id); + + /* Start it up */ + priv->irq = irq; + return ata_host_activate(priv->host, irq, ata_bmdma_interrupt, 0, + &pata_macio_sht); +} + +static int pata_macio_attach(struct macio_dev *mdev, + const struct of_device_id *match) +{ + struct pata_macio_priv *priv; + resource_size_t tfregs, dmaregs = 0; + unsigned long irq; + int rc; + + /* Check for broken device-trees */ + if (macio_resource_count(mdev) == 0) { + dev_err(&mdev->ofdev.dev, + "No addresses for controller\n"); + return -ENXIO; + } + + /* Enable managed resources */ + macio_enable_devres(mdev); + + /* Allocate and init private data structure */ + priv = devm_kzalloc(&mdev->ofdev.dev, + sizeof(struct pata_macio_priv), GFP_KERNEL); + if (priv == NULL) { + dev_err(&mdev->ofdev.dev, + "Failed to allocate private memory\n"); + return -ENOMEM; + } + priv->node = of_node_get(mdev->ofdev.dev.of_node); + priv->mdev = mdev; + priv->dev = &mdev->ofdev.dev; + + /* Request memory resource for taskfile registers */ + if (macio_request_resource(mdev, 0, "pata-macio")) { + dev_err(&mdev->ofdev.dev, + "Cannot obtain taskfile resource\n"); + return -EBUSY; + } + tfregs = macio_resource_start(mdev, 0); + + /* Request resources for DMA registers if any */ + if (macio_resource_count(mdev) >= 2) { + if (macio_request_resource(mdev, 1, "pata-macio-dma")) + dev_err(&mdev->ofdev.dev, + "Cannot obtain DMA resource\n"); + else + dmaregs = macio_resource_start(mdev, 1); + } + + /* + * Fixup missing IRQ for some old implementations with broken + * device-trees. + * + * This is a bit bogus, it should be fixed in the device-tree itself, + * via the existing macio fixups, based on the type of interrupt + * controller in the machine. However, I have no test HW for this case, + * and this trick works well enough on those old machines... + */ + if (macio_irq_count(mdev) == 0) { + dev_warn(&mdev->ofdev.dev, + "No interrupts for controller, using 13\n"); + irq = irq_create_mapping(NULL, 13); + } else + irq = macio_irq(mdev, 0); + + /* Prevvent media bay callbacks until fully registered */ + lock_media_bay(priv->mdev->media_bay); + + /* Get register addresses and call common initialization */ + rc = pata_macio_common_init(priv, + tfregs, /* Taskfile regs */ + dmaregs, /* DBDMA regs */ + 0, /* Feature control */ + irq); + unlock_media_bay(priv->mdev->media_bay); + + return rc; +} + +static int pata_macio_detach(struct macio_dev *mdev) +{ + struct ata_host *host = macio_get_drvdata(mdev); + struct pata_macio_priv *priv = host->private_data; + + lock_media_bay(priv->mdev->media_bay); + + /* Make sure the mediabay callback doesn't try to access + * dead stuff + */ + priv->host->private_data = NULL; + + ata_host_detach(host); + + unlock_media_bay(priv->mdev->media_bay); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int pata_macio_suspend(struct macio_dev *mdev, pm_message_t mesg) +{ + struct ata_host *host = macio_get_drvdata(mdev); + + return pata_macio_do_suspend(host->private_data, mesg); +} + +static int pata_macio_resume(struct macio_dev *mdev) +{ + struct ata_host *host = macio_get_drvdata(mdev); + + return pata_macio_do_resume(host->private_data); +} +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PMAC_MEDIABAY +static void pata_macio_mb_event(struct macio_dev* mdev, int mb_state) +{ + struct ata_host *host = macio_get_drvdata(mdev); + struct ata_port *ap; + struct ata_eh_info *ehi; + struct ata_device *dev; + unsigned long flags; + + if (!host || !host->private_data) + return; + ap = host->ports[0]; + spin_lock_irqsave(ap->lock, flags); + ehi = &ap->link.eh_info; + if (mb_state == MB_CD) { + ata_ehi_push_desc(ehi, "mediabay plug"); + ata_ehi_hotplugged(ehi); + ata_port_freeze(ap); + } else { + ata_ehi_push_desc(ehi, "mediabay unplug"); + ata_for_each_dev(dev, &ap->link, ALL) + dev->flags |= ATA_DFLAG_DETACH; + ata_port_abort(ap); + } + spin_unlock_irqrestore(ap->lock, flags); + +} +#endif /* CONFIG_PMAC_MEDIABAY */ + + +static int pata_macio_pci_attach(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct pata_macio_priv *priv; + struct device_node *np; + resource_size_t rbase; + + /* We cannot use a MacIO controller without its OF device node */ + np = pci_device_to_OF_node(pdev); + if (np == NULL) { + dev_err(&pdev->dev, + "Cannot find OF device node for controller\n"); + return -ENODEV; + } + + /* Check that it can be enabled */ + if (pcim_enable_device(pdev)) { + dev_err(&pdev->dev, + "Cannot enable controller PCI device\n"); + return -ENXIO; + } + + /* Allocate and init private data structure */ + priv = devm_kzalloc(&pdev->dev, + sizeof(struct pata_macio_priv), GFP_KERNEL); + if (priv == NULL) { + dev_err(&pdev->dev, + "Failed to allocate private memory\n"); + return -ENOMEM; + } + priv->node = of_node_get(np); + priv->pdev = pdev; + priv->dev = &pdev->dev; + + /* Get MMIO regions */ + if (pci_request_regions(pdev, "pata-macio")) { + dev_err(&pdev->dev, + "Cannot obtain PCI resources\n"); + return -EBUSY; + } + + /* Get register addresses and call common initialization */ + rbase = pci_resource_start(pdev, 0); + if (pata_macio_common_init(priv, + rbase + 0x2000, /* Taskfile regs */ + rbase + 0x1000, /* DBDMA regs */ + rbase, /* Feature control */ + pdev->irq)) + return -ENXIO; + + return 0; +} + +static void pata_macio_pci_detach(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + + ata_host_detach(host); +} + +#ifdef CONFIG_PM_SLEEP +static int pata_macio_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host *host = pci_get_drvdata(pdev); + + return pata_macio_do_suspend(host->private_data, mesg); +} + +static int pata_macio_pci_resume(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + + return pata_macio_do_resume(host->private_data); +} +#endif /* CONFIG_PM_SLEEP */ + +static struct of_device_id pata_macio_match[] = +{ + { + .name = "IDE", + }, + { + .name = "ATA", + }, + { + .type = "ide", + }, + { + .type = "ata", + }, + {}, +}; + +static struct macio_driver pata_macio_driver = +{ + .driver = { + .name = "pata-macio", + .owner = THIS_MODULE, + .of_match_table = pata_macio_match, + }, + .probe = pata_macio_attach, + .remove = pata_macio_detach, +#ifdef CONFIG_PM_SLEEP + .suspend = pata_macio_suspend, + .resume = pata_macio_resume, +#endif +#ifdef CONFIG_PMAC_MEDIABAY + .mediabay_event = pata_macio_mb_event, +#endif +}; + +static const struct pci_device_id pata_macio_pci_match[] = { + { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA), 0 }, + { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100), 0 }, + { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100), 0 }, + { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_SH_ATA), 0 }, + { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA), 0 }, + {}, +}; + +static struct pci_driver pata_macio_pci_driver = { + .name = "pata-pci-macio", + .id_table = pata_macio_pci_match, + .probe = pata_macio_pci_attach, + .remove = pata_macio_pci_detach, +#ifdef CONFIG_PM_SLEEP + .suspend = pata_macio_pci_suspend, + .resume = pata_macio_pci_resume, +#endif + .driver = { + .owner = THIS_MODULE, + }, +}; +MODULE_DEVICE_TABLE(pci, pata_macio_pci_match); + + +static int __init pata_macio_init(void) +{ + int rc; + + if (!machine_is(powermac)) + return -ENODEV; + + rc = pci_register_driver(&pata_macio_pci_driver); + if (rc) + return rc; + rc = macio_register_driver(&pata_macio_driver); + if (rc) { + pci_unregister_driver(&pata_macio_pci_driver); + return rc; + } + return 0; +} + +static void __exit pata_macio_exit(void) +{ + macio_unregister_driver(&pata_macio_driver); + pci_unregister_driver(&pata_macio_pci_driver); +} + +module_init(pata_macio_init); +module_exit(pata_macio_exit); + +MODULE_AUTHOR("Benjamin Herrenschmidt"); +MODULE_DESCRIPTION("Apple MacIO PATA driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c new file mode 100644 index 000000000..ae9feb1ba --- /dev/null +++ b/drivers/ata/pata_marvell.c @@ -0,0 +1,186 @@ +/* + * Marvell PATA driver. + * + * For the moment we drive the PATA port in legacy mode. That + * isn't making full use of the device functionality but it is + * easy to get working. + * + * (c) 2006 Red Hat + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_marvell" +#define DRV_VERSION "0.1.6" + +/** + * marvell_pata_active - check if PATA is active + * @pdev: PCI device + * + * Returns 1 if the PATA port may be active. We know how to check this + * for the 6145 but not the other devices + */ + +static int marvell_pata_active(struct pci_dev *pdev) +{ + int i; + u32 devices; + void __iomem *barp; + + /* We don't yet know how to do this for other devices */ + if (pdev->device != 0x6145) + return 1; + + barp = pci_iomap(pdev, 5, 0x10); + if (barp == NULL) + return -ENOMEM; + + printk("BAR5:"); + for(i = 0; i <= 0x0F; i++) + printk("%02X:%02X ", i, ioread8(barp + i)); + printk("\n"); + + devices = ioread32(barp + 0x0C); + pci_iounmap(pdev, barp); + + if (devices & 0x10) + return 1; + return 0; +} + +/** + * marvell_pre_reset - probe begin + * @link: link + * @deadline: deadline jiffies for the operation + * + * Perform the PATA port setup we need. + */ + +static int marvell_pre_reset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (pdev->device == 0x6145 && ap->port_no == 0 && + !marvell_pata_active(pdev)) /* PATA enable ? */ + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + +static int marvell_cable_detect(struct ata_port *ap) +{ + /* Cable type */ + switch(ap->port_no) + { + case 0: + if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; + case 1: /* Legacy SATA port */ + return ATA_CBL_SATA; + } + + BUG(); + return 0; /* Our BUG macro needs the right markup */ +} + +/* No PIO or DMA methods needed for this device */ + +static struct scsi_host_template marvell_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations marvell_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = marvell_cable_detect, + .prereset = marvell_pre_reset, +}; + + +/** + * marvell_init_one - Register Marvell ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in marvell_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + + .port_ops = &marvell_ops, + }; + static const struct ata_port_info info_sata = { + /* Slave possible as its magically mapped not real */ + .flags = ATA_FLAG_SLAVE_POSS, + + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + + .port_ops = &marvell_ops, + }; + const struct ata_port_info *ppi[] = { &info, &info_sata }; + + if (pdev->device == 0x6101) + ppi[1] = &ata_dummy_port_info; + +#if defined(CONFIG_SATA_AHCI) || defined(CONFIG_SATA_AHCI_MODULE) + if (!marvell_pata_active(pdev)) { + printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n"); + return -ENODEV; + } +#endif + return ata_pci_bmdma_init_one(pdev, ppi, &marvell_sht, NULL, 0); +} + +static const struct pci_device_id marvell_pci_tbl[] = { + { PCI_DEVICE(0x11AB, 0x6101), }, + { PCI_DEVICE(0x11AB, 0x6121), }, + { PCI_DEVICE(0x11AB, 0x6123), }, + { PCI_DEVICE(0x11AB, 0x6145), }, + { PCI_DEVICE(0x1B4B, 0x91A0), }, + { PCI_DEVICE(0x1B4B, 0x91A4), }, + + { } /* terminate list */ +}; + +static struct pci_driver marvell_pci_driver = { + .name = DRV_NAME, + .id_table = marvell_pci_tbl, + .probe = marvell_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(marvell_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for Marvell ATA in legacy mode"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, marvell_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c new file mode 100644 index 000000000..252ba27fa --- /dev/null +++ b/drivers/ata/pata_mpc52xx.c @@ -0,0 +1,876 @@ +/* + * drivers/ata/pata_mpc52xx.c + * + * libata driver for the Freescale MPC52xx on-chip IDE interface + * + * Copyright (C) 2006 Sylvain Munaut + * Copyright (C) 2003 Mipsys - Benjamin Herrenschmidt + * + * UDMA support based on patches by Freescale (Bernard Kuhn, John Rigby), + * Domen Puncer and Tim Yamin. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#define DRV_NAME "mpc52xx_ata" + +/* Private structures used by the driver */ +struct mpc52xx_ata_timings { + u32 pio1; + u32 pio2; + u32 mdma1; + u32 mdma2; + u32 udma1; + u32 udma2; + u32 udma3; + u32 udma4; + u32 udma5; + int using_udma; +}; + +struct mpc52xx_ata_priv { + unsigned int ipb_period; + struct mpc52xx_ata __iomem *ata_regs; + phys_addr_t ata_regs_pa; + int ata_irq; + struct mpc52xx_ata_timings timings[2]; + int csel; + + /* DMA */ + struct bcom_task *dmatsk; + const struct udmaspec *udmaspec; + const struct mdmaspec *mdmaspec; + int mpc52xx_ata_dma_last_write; + int waiting_for_dma; +}; + + +/* ATAPI-4 PIO specs (in ns) */ +static const u16 ataspec_t0[5] = {600, 383, 240, 180, 120}; +static const u16 ataspec_t1[5] = { 70, 50, 30, 30, 25}; +static const u16 ataspec_t2_8[5] = {290, 290, 290, 80, 70}; +static const u16 ataspec_t2_16[5] = {165, 125, 100, 80, 70}; +static const u16 ataspec_t2i[5] = { 0, 0, 0, 70, 25}; +static const u16 ataspec_t4[5] = { 30, 20, 15, 10, 10}; +static const u16 ataspec_ta[5] = { 35, 35, 35, 35, 35}; + +#define CALC_CLKCYC(c,v) ((((v)+(c)-1)/(c))) + +/* ======================================================================== */ + +/* ATAPI-4 MDMA specs (in clocks) */ +struct mdmaspec { + u8 t0M; + u8 td; + u8 th; + u8 tj; + u8 tkw; + u8 tm; + u8 tn; +}; + +static const struct mdmaspec mdmaspec66[3] = { + { .t0M = 32, .td = 15, .th = 2, .tj = 2, .tkw = 15, .tm = 4, .tn = 1 }, + { .t0M = 10, .td = 6, .th = 1, .tj = 1, .tkw = 4, .tm = 2, .tn = 1 }, + { .t0M = 8, .td = 5, .th = 1, .tj = 1, .tkw = 2, .tm = 2, .tn = 1 }, +}; + +static const struct mdmaspec mdmaspec132[3] = { + { .t0M = 64, .td = 29, .th = 3, .tj = 3, .tkw = 29, .tm = 7, .tn = 2 }, + { .t0M = 20, .td = 11, .th = 2, .tj = 1, .tkw = 7, .tm = 4, .tn = 1 }, + { .t0M = 16, .td = 10, .th = 2, .tj = 1, .tkw = 4, .tm = 4, .tn = 1 }, +}; + +/* ATAPI-4 UDMA specs (in clocks) */ +struct udmaspec { + u8 tcyc; + u8 t2cyc; + u8 tds; + u8 tdh; + u8 tdvs; + u8 tdvh; + u8 tfs; + u8 tli; + u8 tmli; + u8 taz; + u8 tzah; + u8 tenv; + u8 tsr; + u8 trfs; + u8 trp; + u8 tack; + u8 tss; +}; + +static const struct udmaspec udmaspec66[6] = { + { .tcyc = 8, .t2cyc = 16, .tds = 1, .tdh = 1, .tdvs = 5, .tdvh = 1, + .tfs = 16, .tli = 10, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, + .tsr = 3, .trfs = 5, .trp = 11, .tack = 2, .tss = 4, + }, + { .tcyc = 5, .t2cyc = 11, .tds = 1, .tdh = 1, .tdvs = 4, .tdvh = 1, + .tfs = 14, .tli = 10, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, + .tsr = 2, .trfs = 5, .trp = 9, .tack = 2, .tss = 4, + }, + { .tcyc = 4, .t2cyc = 8, .tds = 1, .tdh = 1, .tdvs = 3, .tdvh = 1, + .tfs = 12, .tli = 10, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, + .tsr = 2, .trfs = 4, .trp = 7, .tack = 2, .tss = 4, + }, + { .tcyc = 3, .t2cyc = 6, .tds = 1, .tdh = 1, .tdvs = 2, .tdvh = 1, + .tfs = 9, .tli = 7, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, + .tsr = 2, .trfs = 4, .trp = 7, .tack = 2, .tss = 4, + }, + { .tcyc = 2, .t2cyc = 4, .tds = 1, .tdh = 1, .tdvs = 1, .tdvh = 1, + .tfs = 8, .tli = 8, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, + .tsr = 2, .trfs = 4, .trp = 7, .tack = 2, .tss = 4, + }, + { .tcyc = 2, .t2cyc = 2, .tds = 1, .tdh = 1, .tdvs = 1, .tdvh = 1, + .tfs = 6, .tli = 5, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, + .tsr = 2, .trfs = 4, .trp = 6, .tack = 2, .tss = 4, + }, +}; + +static const struct udmaspec udmaspec132[6] = { + { .tcyc = 15, .t2cyc = 31, .tds = 2, .tdh = 1, .tdvs = 10, .tdvh = 1, + .tfs = 30, .tli = 20, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3, + .tsr = 7, .trfs = 10, .trp = 22, .tack = 3, .tss = 7, + }, + { .tcyc = 10, .t2cyc = 21, .tds = 2, .tdh = 1, .tdvs = 7, .tdvh = 1, + .tfs = 27, .tli = 20, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3, + .tsr = 4, .trfs = 10, .trp = 17, .tack = 3, .tss = 7, + }, + { .tcyc = 6, .t2cyc = 12, .tds = 1, .tdh = 1, .tdvs = 5, .tdvh = 1, + .tfs = 23, .tli = 20, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3, + .tsr = 3, .trfs = 8, .trp = 14, .tack = 3, .tss = 7, + }, + { .tcyc = 7, .t2cyc = 12, .tds = 1, .tdh = 1, .tdvs = 3, .tdvh = 1, + .tfs = 15, .tli = 13, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3, + .tsr = 3, .trfs = 8, .trp = 14, .tack = 3, .tss = 7, + }, + { .tcyc = 2, .t2cyc = 5, .tds = 0, .tdh = 0, .tdvs = 1, .tdvh = 1, + .tfs = 16, .tli = 14, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, + .tsr = 2, .trfs = 7, .trp = 13, .tack = 2, .tss = 6, + }, + { .tcyc = 3, .t2cyc = 6, .tds = 1, .tdh = 1, .tdvs = 1, .tdvh = 1, + .tfs = 12, .tli = 10, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3, + .tsr = 3, .trfs = 7, .trp = 12, .tack = 3, .tss = 7, + }, +}; + +/* ======================================================================== */ + +/* Bit definitions inside the registers */ +#define MPC52xx_ATA_HOSTCONF_SMR 0x80000000UL /* State machine reset */ +#define MPC52xx_ATA_HOSTCONF_FR 0x40000000UL /* FIFO Reset */ +#define MPC52xx_ATA_HOSTCONF_IE 0x02000000UL /* Enable interrupt in PIO */ +#define MPC52xx_ATA_HOSTCONF_IORDY 0x01000000UL /* Drive supports IORDY protocol */ + +#define MPC52xx_ATA_HOSTSTAT_TIP 0x80000000UL /* Transaction in progress */ +#define MPC52xx_ATA_HOSTSTAT_UREP 0x40000000UL /* UDMA Read Extended Pause */ +#define MPC52xx_ATA_HOSTSTAT_RERR 0x02000000UL /* Read Error */ +#define MPC52xx_ATA_HOSTSTAT_WERR 0x01000000UL /* Write Error */ + +#define MPC52xx_ATA_FIFOSTAT_EMPTY 0x01 /* FIFO Empty */ +#define MPC52xx_ATA_FIFOSTAT_ERROR 0x40 /* FIFO Error */ + +#define MPC52xx_ATA_DMAMODE_WRITE 0x01 /* Write DMA */ +#define MPC52xx_ATA_DMAMODE_READ 0x02 /* Read DMA */ +#define MPC52xx_ATA_DMAMODE_UDMA 0x04 /* UDMA enabled */ +#define MPC52xx_ATA_DMAMODE_IE 0x08 /* Enable drive interrupt to CPU in DMA mode */ +#define MPC52xx_ATA_DMAMODE_FE 0x10 /* FIFO Flush enable in Rx mode */ +#define MPC52xx_ATA_DMAMODE_FR 0x20 /* FIFO Reset */ +#define MPC52xx_ATA_DMAMODE_HUT 0x40 /* Host UDMA burst terminate */ + +#define MAX_DMA_BUFFERS 128 +#define MAX_DMA_BUFFER_SIZE 0x20000u + +/* Structure of the hardware registers */ +struct mpc52xx_ata { + + /* Host interface registers */ + u32 config; /* ATA + 0x00 Host configuration */ + u32 host_status; /* ATA + 0x04 Host controller status */ + u32 pio1; /* ATA + 0x08 PIO Timing 1 */ + u32 pio2; /* ATA + 0x0c PIO Timing 2 */ + u32 mdma1; /* ATA + 0x10 MDMA Timing 1 */ + u32 mdma2; /* ATA + 0x14 MDMA Timing 2 */ + u32 udma1; /* ATA + 0x18 UDMA Timing 1 */ + u32 udma2; /* ATA + 0x1c UDMA Timing 2 */ + u32 udma3; /* ATA + 0x20 UDMA Timing 3 */ + u32 udma4; /* ATA + 0x24 UDMA Timing 4 */ + u32 udma5; /* ATA + 0x28 UDMA Timing 5 */ + u32 share_cnt; /* ATA + 0x2c ATA share counter */ + u32 reserved0[3]; + + /* FIFO registers */ + u32 fifo_data; /* ATA + 0x3c */ + u8 fifo_status_frame; /* ATA + 0x40 */ + u8 fifo_status; /* ATA + 0x41 */ + u16 reserved7[1]; + u8 fifo_control; /* ATA + 0x44 */ + u8 reserved8[5]; + u16 fifo_alarm; /* ATA + 0x4a */ + u16 reserved9; + u16 fifo_rdp; /* ATA + 0x4e */ + u16 reserved10; + u16 fifo_wrp; /* ATA + 0x52 */ + u16 reserved11; + u16 fifo_lfrdp; /* ATA + 0x56 */ + u16 reserved12; + u16 fifo_lfwrp; /* ATA + 0x5a */ + + /* Drive TaskFile registers */ + u8 tf_control; /* ATA + 0x5c TASKFILE Control/Alt Status */ + u8 reserved13[3]; + u16 tf_data; /* ATA + 0x60 TASKFILE Data */ + u16 reserved14; + u8 tf_features; /* ATA + 0x64 TASKFILE Features/Error */ + u8 reserved15[3]; + u8 tf_sec_count; /* ATA + 0x68 TASKFILE Sector Count */ + u8 reserved16[3]; + u8 tf_sec_num; /* ATA + 0x6c TASKFILE Sector Number */ + u8 reserved17[3]; + u8 tf_cyl_low; /* ATA + 0x70 TASKFILE Cylinder Low */ + u8 reserved18[3]; + u8 tf_cyl_high; /* ATA + 0x74 TASKFILE Cylinder High */ + u8 reserved19[3]; + u8 tf_dev_head; /* ATA + 0x78 TASKFILE Device/Head */ + u8 reserved20[3]; + u8 tf_command; /* ATA + 0x7c TASKFILE Command/Status */ + u8 dma_mode; /* ATA + 0x7d ATA Host DMA Mode configuration */ + u8 reserved21[2]; +}; + + +/* ======================================================================== */ +/* Aux fns */ +/* ======================================================================== */ + + +/* MPC52xx low level hw control */ +static int +mpc52xx_ata_compute_pio_timings(struct mpc52xx_ata_priv *priv, int dev, int pio) +{ + struct mpc52xx_ata_timings *timing = &priv->timings[dev]; + unsigned int ipb_period = priv->ipb_period; + u32 t0, t1, t2_8, t2_16, t2i, t4, ta; + + if ((pio < 0) || (pio > 4)) + return -EINVAL; + + t0 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t0[pio]); + t1 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t1[pio]); + t2_8 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t2_8[pio]); + t2_16 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t2_16[pio]); + t2i = CALC_CLKCYC(ipb_period, 1000 * ataspec_t2i[pio]); + t4 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t4[pio]); + ta = CALC_CLKCYC(ipb_period, 1000 * ataspec_ta[pio]); + + timing->pio1 = (t0 << 24) | (t2_8 << 16) | (t2_16 << 8) | (t2i); + timing->pio2 = (t4 << 24) | (t1 << 16) | (ta << 8); + + return 0; +} + +static int +mpc52xx_ata_compute_mdma_timings(struct mpc52xx_ata_priv *priv, int dev, + int speed) +{ + struct mpc52xx_ata_timings *t = &priv->timings[dev]; + const struct mdmaspec *s = &priv->mdmaspec[speed]; + + if (speed < 0 || speed > 2) + return -EINVAL; + + t->mdma1 = ((u32)s->t0M << 24) | ((u32)s->td << 16) | ((u32)s->tkw << 8) | s->tm; + t->mdma2 = ((u32)s->th << 24) | ((u32)s->tj << 16) | ((u32)s->tn << 8); + t->using_udma = 0; + + return 0; +} + +static int +mpc52xx_ata_compute_udma_timings(struct mpc52xx_ata_priv *priv, int dev, + int speed) +{ + struct mpc52xx_ata_timings *t = &priv->timings[dev]; + const struct udmaspec *s = &priv->udmaspec[speed]; + + if (speed < 0 || speed > 2) + return -EINVAL; + + t->udma1 = ((u32)s->t2cyc << 24) | ((u32)s->tcyc << 16) | ((u32)s->tds << 8) | s->tdh; + t->udma2 = ((u32)s->tdvs << 24) | ((u32)s->tdvh << 16) | ((u32)s->tfs << 8) | s->tli; + t->udma3 = ((u32)s->tmli << 24) | ((u32)s->taz << 16) | ((u32)s->tenv << 8) | s->tsr; + t->udma4 = ((u32)s->tss << 24) | ((u32)s->trfs << 16) | ((u32)s->trp << 8) | s->tack; + t->udma5 = (u32)s->tzah << 24; + t->using_udma = 1; + + return 0; +} + +static void +mpc52xx_ata_apply_timings(struct mpc52xx_ata_priv *priv, int device) +{ + struct mpc52xx_ata __iomem *regs = priv->ata_regs; + struct mpc52xx_ata_timings *timing = &priv->timings[device]; + + out_be32(®s->pio1, timing->pio1); + out_be32(®s->pio2, timing->pio2); + out_be32(®s->mdma1, timing->mdma1); + out_be32(®s->mdma2, timing->mdma2); + out_be32(®s->udma1, timing->udma1); + out_be32(®s->udma2, timing->udma2); + out_be32(®s->udma3, timing->udma3); + out_be32(®s->udma4, timing->udma4); + out_be32(®s->udma5, timing->udma5); + priv->csel = device; +} + +static int +mpc52xx_ata_hw_init(struct mpc52xx_ata_priv *priv) +{ + struct mpc52xx_ata __iomem *regs = priv->ata_regs; + int tslot; + + /* Clear share_cnt (all sample code do this ...) */ + out_be32(®s->share_cnt, 0); + + /* Configure and reset host */ + out_be32(®s->config, + MPC52xx_ATA_HOSTCONF_IE | + MPC52xx_ATA_HOSTCONF_IORDY | + MPC52xx_ATA_HOSTCONF_SMR | + MPC52xx_ATA_HOSTCONF_FR); + + udelay(10); + + out_be32(®s->config, + MPC52xx_ATA_HOSTCONF_IE | + MPC52xx_ATA_HOSTCONF_IORDY); + + /* Set the time slot to 1us */ + tslot = CALC_CLKCYC(priv->ipb_period, 1000000); + out_be32(®s->share_cnt, tslot << 16); + + /* Init timings to PIO0 */ + memset(priv->timings, 0x00, 2*sizeof(struct mpc52xx_ata_timings)); + + mpc52xx_ata_compute_pio_timings(priv, 0, 0); + mpc52xx_ata_compute_pio_timings(priv, 1, 0); + + mpc52xx_ata_apply_timings(priv, 0); + + return 0; +} + + +/* ======================================================================== */ +/* libata driver */ +/* ======================================================================== */ + +static void +mpc52xx_ata_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct mpc52xx_ata_priv *priv = ap->host->private_data; + int pio, rv; + + pio = adev->pio_mode - XFER_PIO_0; + + rv = mpc52xx_ata_compute_pio_timings(priv, adev->devno, pio); + + if (rv) { + dev_err(ap->dev, "error: invalid PIO mode: %d\n", pio); + return; + } + + mpc52xx_ata_apply_timings(priv, adev->devno); +} + +static void +mpc52xx_ata_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct mpc52xx_ata_priv *priv = ap->host->private_data; + int rv; + + if (adev->dma_mode >= XFER_UDMA_0) { + int dma = adev->dma_mode - XFER_UDMA_0; + rv = mpc52xx_ata_compute_udma_timings(priv, adev->devno, dma); + } else { + int dma = adev->dma_mode - XFER_MW_DMA_0; + rv = mpc52xx_ata_compute_mdma_timings(priv, adev->devno, dma); + } + + if (rv) { + dev_alert(ap->dev, + "Trying to select invalid DMA mode %d\n", + adev->dma_mode); + return; + } + + mpc52xx_ata_apply_timings(priv, adev->devno); +} + +static void +mpc52xx_ata_dev_select(struct ata_port *ap, unsigned int device) +{ + struct mpc52xx_ata_priv *priv = ap->host->private_data; + + if (device != priv->csel) + mpc52xx_ata_apply_timings(priv, device); + + ata_sff_dev_select(ap, device); +} + +static int +mpc52xx_ata_build_dmatable(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mpc52xx_ata_priv *priv = ap->host->private_data; + struct bcom_ata_bd *bd; + unsigned int read = !(qc->tf.flags & ATA_TFLAG_WRITE), si; + struct scatterlist *sg; + int count = 0; + + if (read) + bcom_ata_rx_prepare(priv->dmatsk); + else + bcom_ata_tx_prepare(priv->dmatsk); + + for_each_sg(qc->sg, sg, qc->n_elem, si) { + dma_addr_t cur_addr = sg_dma_address(sg); + u32 cur_len = sg_dma_len(sg); + + while (cur_len) { + unsigned int tc = min(cur_len, MAX_DMA_BUFFER_SIZE); + bd = (struct bcom_ata_bd *) + bcom_prepare_next_buffer(priv->dmatsk); + + if (read) { + bd->status = tc; + bd->src_pa = (__force u32) priv->ata_regs_pa + + offsetof(struct mpc52xx_ata, fifo_data); + bd->dst_pa = (__force u32) cur_addr; + } else { + bd->status = tc; + bd->src_pa = (__force u32) cur_addr; + bd->dst_pa = (__force u32) priv->ata_regs_pa + + offsetof(struct mpc52xx_ata, fifo_data); + } + + bcom_submit_next_buffer(priv->dmatsk, NULL); + + cur_addr += tc; + cur_len -= tc; + count++; + + if (count > MAX_DMA_BUFFERS) { + dev_alert(ap->dev, "dma table" + "too small\n"); + goto use_pio_instead; + } + } + } + return 1; + + use_pio_instead: + bcom_ata_reset_bd(priv->dmatsk); + return 0; +} + +static void +mpc52xx_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mpc52xx_ata_priv *priv = ap->host->private_data; + struct mpc52xx_ata __iomem *regs = priv->ata_regs; + + unsigned int read = !(qc->tf.flags & ATA_TFLAG_WRITE); + u8 dma_mode; + + if (!mpc52xx_ata_build_dmatable(qc)) + dev_alert(ap->dev, "%s: %i, return 1?\n", + __func__, __LINE__); + + /* Check FIFO is OK... */ + if (in_8(&priv->ata_regs->fifo_status) & MPC52xx_ATA_FIFOSTAT_ERROR) + dev_alert(ap->dev, "%s: FIFO error detected: 0x%02x!\n", + __func__, in_8(&priv->ata_regs->fifo_status)); + + if (read) { + dma_mode = MPC52xx_ATA_DMAMODE_IE | MPC52xx_ATA_DMAMODE_READ | + MPC52xx_ATA_DMAMODE_FE; + + /* Setup FIFO if direction changed */ + if (priv->mpc52xx_ata_dma_last_write != 0) { + priv->mpc52xx_ata_dma_last_write = 0; + + /* Configure FIFO with granularity to 7 */ + out_8(®s->fifo_control, 7); + out_be16(®s->fifo_alarm, 128); + + /* Set FIFO Reset bit (FR) */ + out_8(®s->dma_mode, MPC52xx_ATA_DMAMODE_FR); + } + } else { + dma_mode = MPC52xx_ATA_DMAMODE_IE | MPC52xx_ATA_DMAMODE_WRITE; + + /* Setup FIFO if direction changed */ + if (priv->mpc52xx_ata_dma_last_write != 1) { + priv->mpc52xx_ata_dma_last_write = 1; + + /* Configure FIFO with granularity to 4 */ + out_8(®s->fifo_control, 4); + out_be16(®s->fifo_alarm, 128); + } + } + + if (priv->timings[qc->dev->devno].using_udma) + dma_mode |= MPC52xx_ATA_DMAMODE_UDMA; + + out_8(®s->dma_mode, dma_mode); + priv->waiting_for_dma = ATA_DMA_ACTIVE; + + ata_wait_idle(ap); + ap->ops->sff_exec_command(ap, &qc->tf); +} + +static void +mpc52xx_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mpc52xx_ata_priv *priv = ap->host->private_data; + + bcom_set_task_auto_start(priv->dmatsk->tasknum, priv->dmatsk->tasknum); + bcom_enable(priv->dmatsk); +} + +static void +mpc52xx_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mpc52xx_ata_priv *priv = ap->host->private_data; + + bcom_disable(priv->dmatsk); + bcom_ata_reset_bd(priv->dmatsk); + priv->waiting_for_dma = 0; + + /* Check FIFO is OK... */ + if (in_8(&priv->ata_regs->fifo_status) & MPC52xx_ATA_FIFOSTAT_ERROR) + dev_alert(ap->dev, "%s: FIFO error detected: 0x%02x!\n", + __func__, in_8(&priv->ata_regs->fifo_status)); +} + +static u8 +mpc52xx_bmdma_status(struct ata_port *ap) +{ + struct mpc52xx_ata_priv *priv = ap->host->private_data; + + /* Check FIFO is OK... */ + if (in_8(&priv->ata_regs->fifo_status) & MPC52xx_ATA_FIFOSTAT_ERROR) { + dev_alert(ap->dev, "%s: FIFO error detected: 0x%02x!\n", + __func__, in_8(&priv->ata_regs->fifo_status)); + return priv->waiting_for_dma | ATA_DMA_ERR; + } + + return priv->waiting_for_dma; +} + +static irqreturn_t +mpc52xx_ata_task_irq(int irq, void *vpriv) +{ + struct mpc52xx_ata_priv *priv = vpriv; + while (bcom_buffer_done(priv->dmatsk)) + bcom_retrieve_buffer(priv->dmatsk, NULL, NULL); + + priv->waiting_for_dma |= ATA_DMA_INTR; + + return IRQ_HANDLED; +} + +static struct scsi_host_template mpc52xx_ata_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations mpc52xx_ata_port_ops = { + .inherits = &ata_bmdma_port_ops, + .sff_dev_select = mpc52xx_ata_dev_select, + .set_piomode = mpc52xx_ata_set_piomode, + .set_dmamode = mpc52xx_ata_set_dmamode, + .bmdma_setup = mpc52xx_bmdma_setup, + .bmdma_start = mpc52xx_bmdma_start, + .bmdma_stop = mpc52xx_bmdma_stop, + .bmdma_status = mpc52xx_bmdma_status, + .qc_prep = ata_noop_qc_prep, +}; + +static int mpc52xx_ata_init_one(struct device *dev, + struct mpc52xx_ata_priv *priv, + unsigned long raw_ata_regs, + int mwdma_mask, int udma_mask) +{ + struct ata_host *host; + struct ata_port *ap; + struct ata_ioports *aio; + + host = ata_host_alloc(dev, 1); + if (!host) + return -ENOMEM; + + ap = host->ports[0]; + ap->flags |= ATA_FLAG_SLAVE_POSS; + ap->pio_mask = ATA_PIO4; + ap->mwdma_mask = mwdma_mask; + ap->udma_mask = udma_mask; + ap->ops = &mpc52xx_ata_port_ops; + host->private_data = priv; + + aio = &ap->ioaddr; + aio->cmd_addr = NULL; /* Don't have a classic reg block */ + aio->altstatus_addr = &priv->ata_regs->tf_control; + aio->ctl_addr = &priv->ata_regs->tf_control; + aio->data_addr = &priv->ata_regs->tf_data; + aio->error_addr = &priv->ata_regs->tf_features; + aio->feature_addr = &priv->ata_regs->tf_features; + aio->nsect_addr = &priv->ata_regs->tf_sec_count; + aio->lbal_addr = &priv->ata_regs->tf_sec_num; + aio->lbam_addr = &priv->ata_regs->tf_cyl_low; + aio->lbah_addr = &priv->ata_regs->tf_cyl_high; + aio->device_addr = &priv->ata_regs->tf_dev_head; + aio->status_addr = &priv->ata_regs->tf_command; + aio->command_addr = &priv->ata_regs->tf_command; + + ata_port_desc(ap, "ata_regs 0x%lx", raw_ata_regs); + + /* activate host */ + return ata_host_activate(host, priv->ata_irq, ata_bmdma_interrupt, 0, + &mpc52xx_ata_sht); +} + +/* ======================================================================== */ +/* OF Platform driver */ +/* ======================================================================== */ + +static int mpc52xx_ata_probe(struct platform_device *op) +{ + unsigned int ipb_freq; + struct resource res_mem; + int ata_irq = 0; + struct mpc52xx_ata __iomem *ata_regs; + struct mpc52xx_ata_priv *priv = NULL; + int rv, task_irq; + int mwdma_mask = 0, udma_mask = 0; + const __be32 *prop; + int proplen; + struct bcom_task *dmatsk; + + /* Get ipb frequency */ + ipb_freq = mpc5xxx_get_bus_frequency(op->dev.of_node); + if (!ipb_freq) { + dev_err(&op->dev, "could not determine IPB bus frequency\n"); + return -ENODEV; + } + + /* Get device base address from device tree, request the region + * and ioremap it. */ + rv = of_address_to_resource(op->dev.of_node, 0, &res_mem); + if (rv) { + dev_err(&op->dev, "could not determine device base address\n"); + return rv; + } + + if (!devm_request_mem_region(&op->dev, res_mem.start, + sizeof(*ata_regs), DRV_NAME)) { + dev_err(&op->dev, "error requesting register region\n"); + return -EBUSY; + } + + ata_regs = devm_ioremap(&op->dev, res_mem.start, sizeof(*ata_regs)); + if (!ata_regs) { + dev_err(&op->dev, "error mapping device registers\n"); + return -ENOMEM; + } + + /* + * By default, all DMA modes are disabled for the MPC5200. Some + * boards don't have the required signals routed to make DMA work. + * Also, the MPC5200B has a silicon bug that causes data corruption + * with UDMA if it is used at the same time as the LocalPlus bus. + * + * Instead of trying to guess what modes are usable, check the + * ATA device tree node to find out what DMA modes work on the board. + * UDMA/MWDMA modes can also be forced by adding "libata.force=" + * to the kernel boot parameters. + * + * The MPC5200 ATA controller supports MWDMA modes 0, 1 and 2 and + * UDMA modes 0, 1 and 2. + */ + prop = of_get_property(op->dev.of_node, "mwdma-mode", &proplen); + if ((prop) && (proplen >= 4)) + mwdma_mask = ATA_MWDMA2 & ((1 << (*prop + 1)) - 1); + prop = of_get_property(op->dev.of_node, "udma-mode", &proplen); + if ((prop) && (proplen >= 4)) + udma_mask = ATA_UDMA2 & ((1 << (*prop + 1)) - 1); + + ata_irq = irq_of_parse_and_map(op->dev.of_node, 0); + if (ata_irq == NO_IRQ) { + dev_err(&op->dev, "error mapping irq\n"); + return -EINVAL; + } + + /* Prepare our private structure */ + priv = devm_kzalloc(&op->dev, sizeof(*priv), GFP_ATOMIC); + if (!priv) { + dev_err(&op->dev, "error allocating private structure\n"); + rv = -ENOMEM; + goto err1; + } + + priv->ipb_period = 1000000000 / (ipb_freq / 1000); + priv->ata_regs = ata_regs; + priv->ata_regs_pa = res_mem.start; + priv->ata_irq = ata_irq; + priv->csel = -1; + priv->mpc52xx_ata_dma_last_write = -1; + + if (ipb_freq/1000000 == 66) { + priv->mdmaspec = mdmaspec66; + priv->udmaspec = udmaspec66; + } else { + priv->mdmaspec = mdmaspec132; + priv->udmaspec = udmaspec132; + } + + /* Allocate a BestComm task for DMA */ + dmatsk = bcom_ata_init(MAX_DMA_BUFFERS, MAX_DMA_BUFFER_SIZE); + if (!dmatsk) { + dev_err(&op->dev, "bestcomm initialization failed\n"); + rv = -ENOMEM; + goto err1; + } + + task_irq = bcom_get_task_irq(dmatsk); + rv = devm_request_irq(&op->dev, task_irq, &mpc52xx_ata_task_irq, 0, + "ATA task", priv); + if (rv) { + dev_err(&op->dev, "error requesting DMA IRQ\n"); + goto err2; + } + priv->dmatsk = dmatsk; + + /* Init the hw */ + rv = mpc52xx_ata_hw_init(priv); + if (rv) { + dev_err(&op->dev, "error initializing hardware\n"); + goto err2; + } + + /* Register ourselves to libata */ + rv = mpc52xx_ata_init_one(&op->dev, priv, res_mem.start, + mwdma_mask, udma_mask); + if (rv) { + dev_err(&op->dev, "error registering with ATA layer\n"); + goto err2; + } + + return 0; + + err2: + irq_dispose_mapping(task_irq); + bcom_ata_release(dmatsk); + err1: + irq_dispose_mapping(ata_irq); + return rv; +} + +static int +mpc52xx_ata_remove(struct platform_device *op) +{ + struct ata_host *host = platform_get_drvdata(op); + struct mpc52xx_ata_priv *priv = host->private_data; + int task_irq; + + /* Deregister the ATA interface */ + ata_platform_remove_one(op); + + /* Clean up DMA */ + task_irq = bcom_get_task_irq(priv->dmatsk); + irq_dispose_mapping(task_irq); + bcom_ata_release(priv->dmatsk); + irq_dispose_mapping(priv->ata_irq); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int +mpc52xx_ata_suspend(struct platform_device *op, pm_message_t state) +{ + struct ata_host *host = platform_get_drvdata(op); + + return ata_host_suspend(host, state); +} + +static int +mpc52xx_ata_resume(struct platform_device *op) +{ + struct ata_host *host = platform_get_drvdata(op); + struct mpc52xx_ata_priv *priv = host->private_data; + int rv; + + rv = mpc52xx_ata_hw_init(priv); + if (rv) { + dev_err(host->dev, "error initializing hardware\n"); + return rv; + } + + ata_host_resume(host); + + return 0; +} +#endif + +static struct of_device_id mpc52xx_ata_of_match[] = { + { .compatible = "fsl,mpc5200-ata", }, + { .compatible = "mpc5200-ata", }, + {}, +}; + + +static struct platform_driver mpc52xx_ata_of_platform_driver = { + .probe = mpc52xx_ata_probe, + .remove = mpc52xx_ata_remove, +#ifdef CONFIG_PM_SLEEP + .suspend = mpc52xx_ata_suspend, + .resume = mpc52xx_ata_resume, +#endif + .driver = { + .name = DRV_NAME, + .of_match_table = mpc52xx_ata_of_match, + }, +}; + +module_platform_driver(mpc52xx_ata_of_platform_driver); + +MODULE_AUTHOR("Sylvain Munaut "); +MODULE_DESCRIPTION("Freescale MPC52xx IDE/ATA libata driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(of, mpc52xx_ata_of_match); + diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c new file mode 100644 index 000000000..202b4d601 --- /dev/null +++ b/drivers/ata/pata_mpiix.c @@ -0,0 +1,238 @@ +/* + * pata_mpiix.c - Intel MPIIX PATA for new ATA layer + * (C) 2005-2006 Red Hat Inc + * Alan Cox + * + * The MPIIX is different enough to the PIIX4 and friends that we give it + * a separate driver. The old ide/pci code handles this by just not tuning + * MPIIX at all. + * + * The MPIIX also differs in another important way from the majority of PIIX + * devices. The chip is a bridge (pardon the pun) between the old world of + * ISA IDE and PCI IDE. Although the ATA timings are PCI configured the actual + * IDE controller is not decoded in PCI space and the chip does not claim to + * be IDE class PCI. This requires slightly non-standard probe logic compared + * with PCI IDE and also that we do not disable the device when our driver is + * unloaded (as it has many other functions). + * + * The driver consciously keeps this logic internally to avoid pushing quirky + * PATA history into the clean libata layer. + * + * Thinkpad specific note: If you boot an MPIIX using a thinkpad with a PCMCIA + * hard disk present this driver will not detect it. This is not a bug. In this + * configuration the secondary port of the MPIIX is disabled and the addresses + * are decoded by the PCMCIA bridge and therefore are for a generic IDE driver + * to operate. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_mpiix" +#define DRV_VERSION "0.7.7" + +enum { + IDETIM = 0x6C, /* IDE control register */ + IORDY = (1 << 1), + PPE = (1 << 2), + FTIM = (1 << 0), + ENABLED = (1 << 15), + SECONDARY = (1 << 14) +}; + +static int mpiix_pre_reset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits mpiix_enable_bits = { 0x6D, 1, 0x80, 0x80 }; + + if (!pci_test_config_bits(pdev, &mpiix_enable_bits)) + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + +/** + * mpiix_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. The MPIIX allows us to program the + * IORDY sample point (2-5 clocks), recovery (1-4 clocks) and whether + * prefetching or IORDY are used. + * + * This would get very ugly because we can only program timing for one + * device at a time, the other gets PIO0. Fortunately libata calls + * our qc_issue command before a command is issued so we can flip the + * timings back and forth to reduce the pain. + */ + +static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + int control = 0; + int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 idetim; + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + pci_read_config_word(pdev, IDETIM, &idetim); + + /* Mask the IORDY/TIME/PPE for this device */ + if (adev->class == ATA_DEV_ATA) + control |= PPE; /* Enable prefetch/posting for disk */ + if (ata_pio_need_iordy(adev)) + control |= IORDY; + if (pio > 1) + control |= FTIM; /* This drive is on the fast timing bank */ + + /* Mask out timing and clear both TIME bank selects */ + idetim &= 0xCCEE; + idetim &= ~(0x07 << (4 * adev->devno)); + idetim |= control << (4 * adev->devno); + + idetim |= (timings[pio][0] << 12) | (timings[pio][1] << 8); + pci_write_config_word(pdev, IDETIM, idetim); + + /* We use ap->private_data as a pointer to the device currently + loaded for timing */ + ap->private_data = adev; +} + +/** + * mpiix_qc_issue - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * necessary. Our logic also clears TIME0/TIME1 for the other device so + * that, even if we get this wrong, cycles to the other device will + * be made PIO0. + */ + +static unsigned int mpiix_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + /* If modes have been configured and the channel data is not loaded + then load it. We have to check if pio_mode is set as the core code + does not set adev->pio_mode to XFER_PIO_0 while probing as would be + logical */ + + if (adev->pio_mode && adev != ap->private_data) + mpiix_set_piomode(ap, adev); + + return ata_sff_qc_issue(qc); +} + +static struct scsi_host_template mpiix_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations mpiix_port_ops = { + .inherits = &ata_sff_port_ops, + .qc_issue = mpiix_qc_issue, + .cable_detect = ata_cable_40wire, + .set_piomode = mpiix_set_piomode, + .prereset = mpiix_pre_reset, + .sff_data_xfer = ata_sff_data_xfer32, +}; + +static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + /* Single threaded by the PCI probe logic */ + struct ata_host *host; + struct ata_port *ap; + void __iomem *cmd_addr, *ctl_addr; + u16 idetim; + int cmd, ctl, irq; + + ata_print_version_once(&dev->dev, DRV_VERSION); + + host = ata_host_alloc(&dev->dev, 1); + if (!host) + return -ENOMEM; + ap = host->ports[0]; + + /* MPIIX has many functions which can be turned on or off according + to other devices present. Make sure IDE is enabled before we try + and use it */ + + pci_read_config_word(dev, IDETIM, &idetim); + if (!(idetim & ENABLED)) + return -ENODEV; + + /* See if it's primary or secondary channel... */ + if (!(idetim & SECONDARY)) { + cmd = 0x1F0; + ctl = 0x3F6; + irq = 14; + } else { + cmd = 0x170; + ctl = 0x376; + irq = 15; + } + + cmd_addr = devm_ioport_map(&dev->dev, cmd, 8); + ctl_addr = devm_ioport_map(&dev->dev, ctl, 1); + if (!cmd_addr || !ctl_addr) + return -ENOMEM; + + ata_port_desc(ap, "cmd 0x%x ctl 0x%x", cmd, ctl); + + /* We do our own plumbing to avoid leaking special cases for whacko + ancient hardware into the core code. There are two issues to + worry about. #1 The chip is a bridge so if in legacy mode and + without BARs set fools the setup. #2 If you pci_disable_device + the MPIIX your box goes castors up */ + + ap->ops = &mpiix_port_ops; + ap->pio_mask = ATA_PIO4; + ap->flags |= ATA_FLAG_SLAVE_POSS; + + ap->ioaddr.cmd_addr = cmd_addr; + ap->ioaddr.ctl_addr = ctl_addr; + ap->ioaddr.altstatus_addr = ctl_addr; + + /* Let libata fill in the port details */ + ata_sff_std_ports(&ap->ioaddr); + + /* activate host */ + return ata_host_activate(host, irq, ata_sff_interrupt, IRQF_SHARED, + &mpiix_sht); +} + +static const struct pci_device_id mpiix[] = { + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371MX), }, + + { }, +}; + +static struct pci_driver mpiix_pci_driver = { + .name = DRV_NAME, + .id_table = mpiix, + .probe = mpiix_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(mpiix_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Intel MPIIX"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, mpiix); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c new file mode 100644 index 000000000..0ea18331d --- /dev/null +++ b/drivers/ata/pata_netcell.c @@ -0,0 +1,107 @@ +/* + * pata_netcell.c - Netcell PATA driver + * + * (c) 2006 Red Hat + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_netcell" +#define DRV_VERSION "0.1.7" + +/* No PIO or DMA methods needed for this device */ + +static unsigned int netcell_read_id(struct ata_device *adev, + struct ata_taskfile *tf, u16 *id) +{ + unsigned int err_mask = ata_do_dev_read_id(adev, tf, id); + /* Firmware forgets to mark words 85-87 valid */ + if (err_mask == 0) + id[ATA_ID_CSF_DEFAULT] |= 0x4000; + return err_mask; +} + +static struct scsi_host_template netcell_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations netcell_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = ata_cable_80wire, + .read_id = netcell_read_id, +}; + + +/** + * netcell_init_one - Register Netcell ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in netcell_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + /* Actually we don't really care about these as the + firmware deals with it */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, /* UDMA 133 */ + .port_ops = &netcell_ops, + }; + const struct ata_port_info *port_info[] = { &info, NULL }; + int rc; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* Any chip specific setup/optimisation/messages here */ + ata_pci_bmdma_clear_simplex(pdev); + + /* And let the library code do the work */ + return ata_pci_bmdma_init_one(pdev, port_info, &netcell_sht, NULL, 0); +} + +static const struct pci_device_id netcell_pci_tbl[] = { + { PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), }, + + { } /* terminate list */ +}; + +static struct pci_driver netcell_pci_driver = { + .name = DRV_NAME, + .id_table = netcell_pci_tbl, + .probe = netcell_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(netcell_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for Netcell PATA RAID"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, netcell_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c new file mode 100644 index 000000000..633aa2934 --- /dev/null +++ b/drivers/ata/pata_ninja32.c @@ -0,0 +1,197 @@ +/* + * pata_ninja32.c - Ninja32 PATA for new ATA layer + * (C) 2007 Red Hat Inc + * + * Note: The controller like many controllers has shared timings for + * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back + * in the dma_stop function. Thus we actually don't need a set_dmamode + * method as the PIO method is always called and will set the right PIO + * timing parameters. + * + * The Ninja32 Cardbus is not a generic SFF controller. Instead it is + * laid out as follows off BAR 0. This is based upon Mark Lord's delkin + * driver and the extensive analysis done by the BSD developers, notably + * ITOH Yasufumi. + * + * Base + 0x00 IRQ Status + * Base + 0x01 IRQ control + * Base + 0x02 Chipset control + * Base + 0x03 Unknown + * Base + 0x04 VDMA and reset control + wait bits + * Base + 0x08 BMIMBA + * Base + 0x0C DMA Length + * Base + 0x10 Taskfile + * Base + 0x18 BMDMA Status ? + * Base + 0x1C + * Base + 0x1D Bus master control + * bit 0 = enable + * bit 1 = 0 write/1 read + * bit 2 = 1 sgtable + * bit 3 = go + * bit 4-6 wait bits + * bit 7 = done + * Base + 0x1E AltStatus + * Base + 0x1F timing register + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_ninja32" +#define DRV_VERSION "0.1.5" + + +/** + * ninja32_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. Our timing registers are shared + * but we want to set the PIO timing by default. + */ + +static void ninja32_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static u16 pio_timing[5] = { + 0xd6, 0x85, 0x44, 0x33, 0x13 + }; + iowrite8(pio_timing[adev->pio_mode - XFER_PIO_0], + ap->ioaddr.bmdma_addr + 0x1f); + ap->private_data = adev; +} + + +static void ninja32_dev_select(struct ata_port *ap, unsigned int device) +{ + struct ata_device *adev = &ap->link.device[device]; + if (ap->private_data != adev) { + iowrite8(0xd6, ap->ioaddr.bmdma_addr + 0x1f); + ata_sff_dev_select(ap, device); + ninja32_set_piomode(ap, adev); + } +} + +static struct scsi_host_template ninja32_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations ninja32_port_ops = { + .inherits = &ata_bmdma_port_ops, + .sff_dev_select = ninja32_dev_select, + .cable_detect = ata_cable_40wire, + .set_piomode = ninja32_set_piomode, + .sff_data_xfer = ata_sff_data_xfer32 +}; + +static void ninja32_program(void __iomem *base) +{ + iowrite8(0x05, base + 0x01); /* Enable interrupt lines */ + iowrite8(0xBE, base + 0x02); /* Burst, ?? setup */ + iowrite8(0x01, base + 0x03); /* Unknown */ + iowrite8(0x20, base + 0x04); /* WAIT0 */ + iowrite8(0x8f, base + 0x05); /* Unknown */ + iowrite8(0xa4, base + 0x1c); /* Unknown */ + iowrite8(0x83, base + 0x1d); /* BMDMA control: WAIT0 */ +} + +static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + struct ata_host *host; + struct ata_port *ap; + void __iomem *base; + int rc; + + host = ata_host_alloc(&dev->dev, 1); + if (!host) + return -ENOMEM; + ap = host->ports[0]; + + /* Set up the PCI device */ + rc = pcim_enable_device(dev); + if (rc) + return rc; + rc = pcim_iomap_regions(dev, 1 << 0, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(dev); + if (rc) + return rc; + + host->iomap = pcim_iomap_table(dev); + rc = dma_set_mask(&dev->dev, ATA_DMA_MASK); + if (rc) + return rc; + rc = dma_set_coherent_mask(&dev->dev, ATA_DMA_MASK); + if (rc) + return rc; + pci_set_master(dev); + + /* Set up the register mappings. We use the I/O mapping as only the + older chips also have MMIO on BAR 1 */ + base = host->iomap[0]; + if (!base) + return -ENOMEM; + ap->ops = &ninja32_port_ops; + ap->pio_mask = ATA_PIO4; + ap->flags |= ATA_FLAG_SLAVE_POSS; + + ap->ioaddr.cmd_addr = base + 0x10; + ap->ioaddr.ctl_addr = base + 0x1E; + ap->ioaddr.altstatus_addr = base + 0x1E; + ap->ioaddr.bmdma_addr = base; + ata_sff_std_ports(&ap->ioaddr); + ap->pflags = ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE; + + ninja32_program(base); + /* FIXME: Should we disable them at remove ? */ + return ata_host_activate(host, dev->irq, ata_bmdma_interrupt, + IRQF_SHARED, &ninja32_sht); +} + +#ifdef CONFIG_PM_SLEEP +static int ninja32_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + ninja32_program(host->iomap[0]); + ata_host_resume(host); + return 0; +} +#endif + +static const struct pci_device_id ninja32[] = { + { 0x10FC, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0x8008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0xf008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0xf02C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { }, +}; + +static struct pci_driver ninja32_pci_driver = { + .name = DRV_NAME, + .id_table = ninja32, + .probe = ninja32_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ninja32_reinit_one, +#endif +}; + +module_pci_driver(ninja32_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Ninja32 ATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ninja32); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c new file mode 100644 index 000000000..200e1eb23 --- /dev/null +++ b/drivers/ata/pata_ns87410.c @@ -0,0 +1,176 @@ +/* + * pata_ns87410.c - National Semiconductor 87410 PATA for new ATA layer + * (C) 2006 Red Hat Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_ns87410" +#define DRV_VERSION "0.4.6" + +/** + * ns87410_pre_reset - probe begin + * @link: ATA link + * @deadline: deadline jiffies for the operation + * + * Check enabled ports + */ + +static int ns87410_pre_reset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits ns87410_enable_bits[] = { + { 0x43, 1, 0x08, 0x08 }, + { 0x47, 1, 0x08, 0x08 } + }; + + if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no])) + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + +/** + * ns87410_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program timing data. This is kept per channel not per device, + * and only affects the data port. + */ + +static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = 0x40 + 4 * ap->port_no; + u8 idetcr, idefr; + struct ata_timing at; + + static const u8 activebits[15] = { + 0, 1, 2, 3, 4, + 5, 5, 6, 6, 6, + 6, 7, 7, 7, 7 + }; + + static const u8 recoverbits[12] = { + 0, 1, 2, 3, 4, 5, 6, 6, 7, 7, 7, 7 + }; + + pci_read_config_byte(pdev, port + 3, &idefr); + + if (ata_pio_need_iordy(adev)) + idefr |= 0x04; /* IORDY enable */ + else + idefr &= ~0x04; + + if (ata_timing_compute(adev, adev->pio_mode, &at, 30303, 1) < 0) { + dev_err(&pdev->dev, "unknown mode %d\n", adev->pio_mode); + return; + } + + at.active = clamp_val(at.active, 2, 16) - 2; + at.setup = clamp_val(at.setup, 1, 4) - 1; + at.recover = clamp_val(at.recover, 1, 12) - 1; + + idetcr = (at.setup << 6) | (recoverbits[at.recover] << 3) | activebits[at.active]; + + pci_write_config_byte(pdev, port, idetcr); + pci_write_config_byte(pdev, port + 3, idefr); + /* We use ap->private_data as a pointer to the device currently + loaded for timing */ + ap->private_data = adev; +} + +/** + * ns87410_qc_issue - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * necessary. + */ + +static unsigned int ns87410_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + /* If modes have been configured and the channel data is not loaded + then load it. We have to check if pio_mode is set as the core code + does not set adev->pio_mode to XFER_PIO_0 while probing as would be + logical */ + + if (adev->pio_mode && adev != ap->private_data) + ns87410_set_piomode(ap, adev); + + return ata_sff_qc_issue(qc); +} + +static struct scsi_host_template ns87410_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations ns87410_port_ops = { + .inherits = &ata_sff_port_ops, + .qc_issue = ns87410_qc_issue, + .cable_detect = ata_cable_40wire, + .set_piomode = ns87410_set_piomode, + .prereset = ns87410_pre_reset, +}; + +static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO3, + .port_ops = &ns87410_port_ops + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + return ata_pci_sff_init_one(dev, ppi, &ns87410_sht, NULL, 0); +} + +static const struct pci_device_id ns87410[] = { + { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87410), }, + + { }, +}; + +static struct pci_driver ns87410_pci_driver = { + .name = DRV_NAME, + .id_table = ns87410, + .probe = ns87410_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(ns87410_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Nat Semi 87410"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ns87410); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c new file mode 100644 index 000000000..84c6b225b --- /dev/null +++ b/drivers/ata/pata_ns87415.c @@ -0,0 +1,422 @@ +/* + * pata_ns87415.c - NS87415 (non PARISC) PATA + * + * (C) 2005 Red Hat + * + * This is a fairly generic MWDMA controller. It has some limitations + * as it requires timing reloads on PIO/DMA transitions but it is otherwise + * fairly well designed. + * + * This driver assumes the firmware has left the chip in a valid ST506 + * compliant state, either legacy IRQ 14/15 or native INTA shared. You + * may need to add platform code if your system fails to do this. + * + * The same cell appears in the 87560 controller used by some PARISC + * systems. This has its own special mountain of errata. + * + * TODO: + * Test PARISC SuperIO + * Get someone to test on SPARC + * Implement lazy pio/dma switching for better performance + * 8bit shared timing. + * See if we need to kill the FIFO for ATAPI + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_ns87415" +#define DRV_VERSION "0.0.1" + +/** + * ns87415_set_mode - Initialize host controller mode timings + * @ap: Port whose timings we are configuring + * @adev: Device whose timings we are configuring + * @mode: Mode to set + * + * Program the mode registers for this controller, channel and + * device. Because the chip is quite an old design we have to do this + * for PIO/DMA switches. + * + * LOCKING: + * None (inherited from caller). + */ + +static void ns87415_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mode) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + int unit = 2 * ap->port_no + adev->devno; + int timing = 0x44 + 2 * unit; + unsigned long T = 1000000000 / 33333; /* PCI clocks */ + struct ata_timing t; + u16 clocking; + u8 iordy; + u8 status; + + /* Timing register format is 17 - low nybble read timing with + the high nybble being 16 - x for recovery time in PCI clocks */ + + ata_timing_compute(adev, adev->pio_mode, &t, T, 0); + + clocking = 17 - clamp_val(t.active, 2, 17); + clocking |= (16 - clamp_val(t.recover, 1, 16)) << 4; + /* Use the same timing for read and write bytes */ + clocking |= (clocking << 8); + pci_write_config_word(dev, timing, clocking); + + /* Set the IORDY enable versus DMA enable on or off properly */ + pci_read_config_byte(dev, 0x42, &iordy); + iordy &= ~(1 << (4 + unit)); + if (mode >= XFER_MW_DMA_0 || !ata_pio_need_iordy(adev)) + iordy |= (1 << (4 + unit)); + + /* Paranoia: We shouldn't ever get here with busy write buffers + but if so wait */ + + pci_read_config_byte(dev, 0x43, &status); + while (status & 0x03) { + udelay(1); + pci_read_config_byte(dev, 0x43, &status); + } + /* Flip the IORDY/DMA bits now we are sure the write buffers are + clear */ + pci_write_config_byte(dev, 0x42, iordy); + + /* TODO: Set byte 54 command timing to the best 8bit + mode shared by all four devices */ +} + +/** + * ns87415_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void ns87415_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + ns87415_set_mode(ap, adev, adev->pio_mode); +} + +/** + * ns87415_bmdma_setup - Set up DMA + * @qc: Command block + * + * Set up for bus masterng DMA. We have to do this ourselves + * rather than use the helper due to a chip erratum + */ + +static void ns87415_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u8 dmactl; + + /* load PRD table addr. */ + mb(); /* make sure PRD table writes are visible to controller */ + iowrite32(ap->bmdma_prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); + + /* specify data direction, triple-check start bit is clear */ + dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); + /* Due to an erratum we need to write these bits to the wrong + place - which does save us an I/O bizarrely */ + dmactl |= ATA_DMA_INTR | ATA_DMA_ERR; + if (!rw) + dmactl |= ATA_DMA_WR; + iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} + +/** + * ns87415_bmdma_start - Begin DMA transfer + * @qc: Command block + * + * Switch the timings for the chip and set up for a DMA transfer + * before the DMA burst begins. + * + * FIXME: We should do lazy switching on bmdma_start versus + * ata_pio_data_xfer for better performance. + */ + +static void ns87415_bmdma_start(struct ata_queued_cmd *qc) +{ + ns87415_set_mode(qc->ap, qc->dev, qc->dev->dma_mode); + ata_bmdma_start(qc); +} + +/** + * ns87415_bmdma_stop - End DMA transfer + * @qc: Command block + * + * End DMA mode and switch the controller back into PIO mode + */ + +static void ns87415_bmdma_stop(struct ata_queued_cmd *qc) +{ + ata_bmdma_stop(qc); + ns87415_set_mode(qc->ap, qc->dev, qc->dev->pio_mode); +} + +/** + * ns87415_irq_clear - Clear interrupt + * @ap: Channel to clear + * + * Erratum: Due to a chip bug regisers 02 and 0A bit 1 and 2 (the + * error bits) are reset by writing to register 00 or 08. + */ + +static void ns87415_irq_clear(struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.bmdma_addr; + + if (!mmio) + return; + iowrite8((ioread8(mmio + ATA_DMA_CMD) | ATA_DMA_INTR | ATA_DMA_ERR), + mmio + ATA_DMA_CMD); +} + +/** + * ns87415_check_atapi_dma - ATAPI DMA filter + * @qc: Command block + * + * Disable ATAPI DMA (for now). We may be able to do DMA if we + * kill the prefetching. This isn't clear. + */ + +static int ns87415_check_atapi_dma(struct ata_queued_cmd *qc) +{ + return -EOPNOTSUPP; +} + +#if defined(CONFIG_SUPERIO) + +/* SUPERIO 87560 is a PoS chip that NatSem denies exists. + * Unfortunately, it's built-in on all Astro-based PA-RISC workstations + * which use the integrated NS87514 cell for CD-ROM support. + * i.e we have to support for CD-ROM installs. + * See drivers/parisc/superio.c for more gory details. + * + * Workarounds taken from drivers/ide/pci/ns87415.c + */ + +#include + +#define SUPERIO_IDE_MAX_RETRIES 25 + +/** + * ns87560_read_buggy - workaround buggy Super I/O chip + * @port: Port to read + * + * Work around chipset problems in the 87560 SuperIO chip + */ + +static u8 ns87560_read_buggy(void __iomem *port) +{ + u8 tmp; + int retries = SUPERIO_IDE_MAX_RETRIES; + do { + tmp = ioread8(port); + if (tmp != 0) + return tmp; + udelay(50); + } while(retries-- > 0); + return tmp; +} + +/** + * ns87560_check_status + * @ap: channel to check + * + * Return the status of the channel working around the + * 87560 flaws. + */ + +static u8 ns87560_check_status(struct ata_port *ap) +{ + return ns87560_read_buggy(ap->ioaddr.status_addr); +} + +/** + * ns87560_tf_read - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. Work around the 87560 bugs. + * + * LOCKING: + * Inherited from caller. + */ +void ns87560_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->command = ns87560_check_status(ap); + tf->feature = ioread8(ioaddr->error_addr); + tf->nsect = ioread8(ioaddr->nsect_addr); + tf->lbal = ioread8(ioaddr->lbal_addr); + tf->lbam = ioread8(ioaddr->lbam_addr); + tf->lbah = ioread8(ioaddr->lbah_addr); + tf->device = ns87560_read_buggy(ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr); + tf->hob_feature = ioread8(ioaddr->error_addr); + tf->hob_nsect = ioread8(ioaddr->nsect_addr); + tf->hob_lbal = ioread8(ioaddr->lbal_addr); + tf->hob_lbam = ioread8(ioaddr->lbam_addr); + tf->hob_lbah = ioread8(ioaddr->lbah_addr); + iowrite8(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + } +} + +/** + * ns87560_bmdma_status + * @ap: channel to check + * + * Return the DMA status of the channel working around the + * 87560 flaws. + */ + +static u8 ns87560_bmdma_status(struct ata_port *ap) +{ + return ns87560_read_buggy(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); +} +#endif /* 87560 SuperIO Support */ + +static struct ata_port_operations ns87415_pata_ops = { + .inherits = &ata_bmdma_port_ops, + + .check_atapi_dma = ns87415_check_atapi_dma, + .bmdma_setup = ns87415_bmdma_setup, + .bmdma_start = ns87415_bmdma_start, + .bmdma_stop = ns87415_bmdma_stop, + .sff_irq_clear = ns87415_irq_clear, + + .cable_detect = ata_cable_40wire, + .set_piomode = ns87415_set_piomode, +}; + +#if defined(CONFIG_SUPERIO) +static struct ata_port_operations ns87560_pata_ops = { + .inherits = &ns87415_pata_ops, + .sff_tf_read = ns87560_tf_read, + .sff_check_status = ns87560_check_status, + .bmdma_status = ns87560_bmdma_status, +}; +#endif + +static struct scsi_host_template ns87415_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static void ns87415_fixup(struct pci_dev *pdev) +{ + /* Select 512 byte sectors */ + pci_write_config_byte(pdev, 0x55, 0xEE); + /* Select PIO0 8bit clocking */ + pci_write_config_byte(pdev, 0x54, 0xB7); +} + +/** + * ns87415_init_one - Register 87415 ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in ns87415_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .port_ops = &ns87415_pata_ops, + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + int rc; +#if defined(CONFIG_SUPERIO) + static const struct ata_port_info info87560 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .port_ops = &ns87560_pata_ops, + }; + + if (PCI_SLOT(pdev->devfn) == 0x0E) + ppi[0] = &info87560; +#endif + ata_print_version_once(&pdev->dev, DRV_VERSION); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + ns87415_fixup(pdev); + + return ata_pci_bmdma_init_one(pdev, ppi, &ns87415_sht, NULL, 0); +} + +static const struct pci_device_id ns87415_pci_tbl[] = { + { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87415), }, + + { } /* terminate list */ +}; + +#ifdef CONFIG_PM_SLEEP +static int ns87415_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + ns87415_fixup(pdev); + + ata_host_resume(host); + return 0; +} +#endif + +static struct pci_driver ns87415_pci_driver = { + .name = DRV_NAME, + .id_table = ns87415_pci_tbl, + .probe = ns87415_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ns87415_reinit_one, +#endif +}; + +module_pci_driver(ns87415_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("ATA low-level driver for NS87415 controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c new file mode 100644 index 000000000..27245957e --- /dev/null +++ b/drivers/ata/pata_octeon_cf.c @@ -0,0 +1,1079 @@ +/* + * Driver for the Octeon bootbus compact flash. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 - 2012 Cavium Inc. + * Copyright (C) 2008 Wind River Systems + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* + * The Octeon bootbus compact flash interface is connected in at least + * 3 different configurations on various evaluation boards: + * + * -- 8 bits no irq, no DMA + * -- 16 bits no irq, no DMA + * -- 16 bits True IDE mode with DMA, but no irq. + * + * In the last case the DMA engine can generate an interrupt when the + * transfer is complete. For the first two cases only PIO is supported. + * + */ + +#define DRV_NAME "pata_octeon_cf" +#define DRV_VERSION "2.2" + +/* Poll interval in nS. */ +#define OCTEON_CF_BUSY_POLL_INTERVAL 500000 + +#define DMA_CFG 0 +#define DMA_TIM 0x20 +#define DMA_INT 0x38 +#define DMA_INT_EN 0x50 + +struct octeon_cf_port { + struct hrtimer delayed_finish; + struct ata_port *ap; + int dma_finished; + void *c0; + unsigned int cs0; + unsigned int cs1; + bool is_true_ide; + u64 dma_base; +}; + +static struct scsi_host_template octeon_cf_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static int enable_dma; +module_param(enable_dma, int, 0444); +MODULE_PARM_DESC(enable_dma, + "Enable use of DMA on interfaces that support it (0=no dma [default], 1=use dma)"); + +/** + * Convert nanosecond based time to setting used in the + * boot bus timing register, based on timing multiple + */ +static unsigned int ns_to_tim_reg(unsigned int tim_mult, unsigned int nsecs) +{ + unsigned int val; + + /* + * Compute # of eclock periods to get desired duration in + * nanoseconds. + */ + val = DIV_ROUND_UP(nsecs * (octeon_get_io_clock_rate() / 1000000), + 1000 * tim_mult); + + return val; +} + +static void octeon_cf_set_boot_reg_cfg(int cs, unsigned int multiplier) +{ + union cvmx_mio_boot_reg_cfgx reg_cfg; + unsigned int tim_mult; + + switch (multiplier) { + case 8: + tim_mult = 3; + break; + case 4: + tim_mult = 0; + break; + case 2: + tim_mult = 2; + break; + default: + tim_mult = 1; + break; + } + + reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs)); + reg_cfg.s.dmack = 0; /* Don't assert DMACK on access */ + reg_cfg.s.tim_mult = tim_mult; /* Timing mutiplier */ + reg_cfg.s.rd_dly = 0; /* Sample on falling edge of BOOT_OE */ + reg_cfg.s.sam = 0; /* Don't combine write and output enable */ + reg_cfg.s.we_ext = 0; /* No write enable extension */ + reg_cfg.s.oe_ext = 0; /* No read enable extension */ + reg_cfg.s.en = 1; /* Enable this region */ + reg_cfg.s.orbit = 0; /* Don't combine with previous region */ + reg_cfg.s.ale = 0; /* Don't do address multiplexing */ + cvmx_write_csr(CVMX_MIO_BOOT_REG_CFGX(cs), reg_cfg.u64); +} + +/** + * Called after libata determines the needed PIO mode. This + * function programs the Octeon bootbus regions to support the + * timing requirements of the PIO mode. + * + * @ap: ATA port information + * @dev: ATA device + */ +static void octeon_cf_set_piomode(struct ata_port *ap, struct ata_device *dev) +{ + struct octeon_cf_port *cf_port = ap->private_data; + union cvmx_mio_boot_reg_timx reg_tim; + int T; + struct ata_timing timing; + + unsigned int div; + int use_iordy; + int trh; + int pause; + /* These names are timing parameters from the ATA spec */ + int t1; + int t2; + int t2i; + + /* + * A divisor value of four will overflow the timing fields at + * clock rates greater than 800MHz + */ + if (octeon_get_io_clock_rate() <= 800000000) + div = 4; + else + div = 8; + T = (int)((1000000000000LL * div) / octeon_get_io_clock_rate()); + + if (ata_timing_compute(dev, dev->pio_mode, &timing, T, T)) + BUG(); + + t1 = timing.setup; + if (t1) + t1--; + t2 = timing.active; + if (t2) + t2--; + t2i = timing.act8b; + if (t2i) + t2i--; + + trh = ns_to_tim_reg(div, 20); + if (trh) + trh--; + + pause = (int)timing.cycle - (int)timing.active - + (int)timing.setup - trh; + if (pause < 0) + pause = 0; + if (pause) + pause--; + + octeon_cf_set_boot_reg_cfg(cf_port->cs0, div); + if (cf_port->is_true_ide) + /* True IDE mode, program both chip selects. */ + octeon_cf_set_boot_reg_cfg(cf_port->cs1, div); + + + use_iordy = ata_pio_need_iordy(dev); + + reg_tim.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_TIMX(cf_port->cs0)); + /* Disable page mode */ + reg_tim.s.pagem = 0; + /* Enable dynamic timing */ + reg_tim.s.waitm = use_iordy; + /* Pages are disabled */ + reg_tim.s.pages = 0; + /* We don't use multiplexed address mode */ + reg_tim.s.ale = 0; + /* Not used */ + reg_tim.s.page = 0; + /* Time after IORDY to coninue to assert the data */ + reg_tim.s.wait = 0; + /* Time to wait to complete the cycle. */ + reg_tim.s.pause = pause; + /* How long to hold after a write to de-assert CE. */ + reg_tim.s.wr_hld = trh; + /* How long to wait after a read to de-assert CE. */ + reg_tim.s.rd_hld = trh; + /* How long write enable is asserted */ + reg_tim.s.we = t2; + /* How long read enable is asserted */ + reg_tim.s.oe = t2; + /* Time after CE that read/write starts */ + reg_tim.s.ce = ns_to_tim_reg(div, 5); + /* Time before CE that address is valid */ + reg_tim.s.adr = 0; + + /* Program the bootbus region timing for the data port chip select. */ + cvmx_write_csr(CVMX_MIO_BOOT_REG_TIMX(cf_port->cs0), reg_tim.u64); + if (cf_port->is_true_ide) + /* True IDE mode, program both chip selects. */ + cvmx_write_csr(CVMX_MIO_BOOT_REG_TIMX(cf_port->cs1), + reg_tim.u64); +} + +static void octeon_cf_set_dmamode(struct ata_port *ap, struct ata_device *dev) +{ + struct octeon_cf_port *cf_port = ap->private_data; + union cvmx_mio_boot_pin_defs pin_defs; + union cvmx_mio_boot_dma_timx dma_tim; + unsigned int oe_a; + unsigned int oe_n; + unsigned int dma_ackh; + unsigned int dma_arq; + unsigned int pause; + unsigned int T0, Tkr, Td; + unsigned int tim_mult; + int c; + + const struct ata_timing *timing; + + timing = ata_timing_find_mode(dev->dma_mode); + T0 = timing->cycle; + Td = timing->active; + Tkr = timing->recover; + dma_ackh = timing->dmack_hold; + + dma_tim.u64 = 0; + /* dma_tim.s.tim_mult = 0 --> 4x */ + tim_mult = 4; + + /* not spec'ed, value in eclocks, not affected by tim_mult */ + dma_arq = 8; + pause = 25 - dma_arq * 1000 / + (octeon_get_io_clock_rate() / 1000000); /* Tz */ + + oe_a = Td; + /* Tkr from cf spec, lengthened to meet T0 */ + oe_n = max(T0 - oe_a, Tkr); + + pin_defs.u64 = cvmx_read_csr(CVMX_MIO_BOOT_PIN_DEFS); + + /* DMA channel number. */ + c = (cf_port->dma_base & 8) >> 3; + + /* Invert the polarity if the default is 0*/ + dma_tim.s.dmack_pi = (pin_defs.u64 & (1ull << (11 + c))) ? 0 : 1; + + dma_tim.s.oe_n = ns_to_tim_reg(tim_mult, oe_n); + dma_tim.s.oe_a = ns_to_tim_reg(tim_mult, oe_a); + + /* + * This is tI, C.F. spec. says 0, but Sony CF card requires + * more, we use 20 nS. + */ + dma_tim.s.dmack_s = ns_to_tim_reg(tim_mult, 20); + dma_tim.s.dmack_h = ns_to_tim_reg(tim_mult, dma_ackh); + + dma_tim.s.dmarq = dma_arq; + dma_tim.s.pause = ns_to_tim_reg(tim_mult, pause); + + dma_tim.s.rd_dly = 0; /* Sample right on edge */ + + /* writes only */ + dma_tim.s.we_n = ns_to_tim_reg(tim_mult, oe_n); + dma_tim.s.we_a = ns_to_tim_reg(tim_mult, oe_a); + + pr_debug("ns to ticks (mult %d) of %d is: %d\n", tim_mult, 60, + ns_to_tim_reg(tim_mult, 60)); + pr_debug("oe_n: %d, oe_a: %d, dmack_s: %d, dmack_h: %d, dmarq: %d, pause: %d\n", + dma_tim.s.oe_n, dma_tim.s.oe_a, dma_tim.s.dmack_s, + dma_tim.s.dmack_h, dma_tim.s.dmarq, dma_tim.s.pause); + + cvmx_write_csr(cf_port->dma_base + DMA_TIM, dma_tim.u64); +} + +/** + * Handle an 8 bit I/O request. + * + * @dev: Device to access + * @buffer: Data buffer + * @buflen: Length of the buffer. + * @rw: True to write. + */ +static unsigned int octeon_cf_data_xfer8(struct ata_device *dev, + unsigned char *buffer, + unsigned int buflen, + int rw) +{ + struct ata_port *ap = dev->link->ap; + void __iomem *data_addr = ap->ioaddr.data_addr; + unsigned long words; + int count; + + words = buflen; + if (rw) { + count = 16; + while (words--) { + iowrite8(*buffer, data_addr); + buffer++; + /* + * Every 16 writes do a read so the bootbus + * FIFO doesn't fill up. + */ + if (--count == 0) { + ioread8(ap->ioaddr.altstatus_addr); + count = 16; + } + } + } else { + ioread8_rep(data_addr, buffer, words); + } + return buflen; +} + +/** + * Handle a 16 bit I/O request. + * + * @dev: Device to access + * @buffer: Data buffer + * @buflen: Length of the buffer. + * @rw: True to write. + */ +static unsigned int octeon_cf_data_xfer16(struct ata_device *dev, + unsigned char *buffer, + unsigned int buflen, + int rw) +{ + struct ata_port *ap = dev->link->ap; + void __iomem *data_addr = ap->ioaddr.data_addr; + unsigned long words; + int count; + + words = buflen / 2; + if (rw) { + count = 16; + while (words--) { + iowrite16(*(uint16_t *)buffer, data_addr); + buffer += sizeof(uint16_t); + /* + * Every 16 writes do a read so the bootbus + * FIFO doesn't fill up. + */ + if (--count == 0) { + ioread8(ap->ioaddr.altstatus_addr); + count = 16; + } + } + } else { + while (words--) { + *(uint16_t *)buffer = ioread16(data_addr); + buffer += sizeof(uint16_t); + } + } + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + __le16 align_buf[1] = { 0 }; + + if (rw == READ) { + align_buf[0] = cpu_to_le16(ioread16(data_addr)); + memcpy(buffer, align_buf, 1); + } else { + memcpy(align_buf, buffer, 1); + iowrite16(le16_to_cpu(align_buf[0]), data_addr); + } + words++; + } + return buflen; +} + +/** + * Read the taskfile for 16bit non-True IDE only. + */ +static void octeon_cf_tf_read16(struct ata_port *ap, struct ata_taskfile *tf) +{ + u16 blob; + /* The base of the registers is at ioaddr.data_addr. */ + void __iomem *base = ap->ioaddr.data_addr; + + blob = __raw_readw(base + 0xc); + tf->feature = blob >> 8; + + blob = __raw_readw(base + 2); + tf->nsect = blob & 0xff; + tf->lbal = blob >> 8; + + blob = __raw_readw(base + 4); + tf->lbam = blob & 0xff; + tf->lbah = blob >> 8; + + blob = __raw_readw(base + 6); + tf->device = blob & 0xff; + tf->command = blob >> 8; + + if (tf->flags & ATA_TFLAG_LBA48) { + if (likely(ap->ioaddr.ctl_addr)) { + iowrite8(tf->ctl | ATA_HOB, ap->ioaddr.ctl_addr); + + blob = __raw_readw(base + 0xc); + tf->hob_feature = blob >> 8; + + blob = __raw_readw(base + 2); + tf->hob_nsect = blob & 0xff; + tf->hob_lbal = blob >> 8; + + blob = __raw_readw(base + 4); + tf->hob_lbam = blob & 0xff; + tf->hob_lbah = blob >> 8; + + iowrite8(tf->ctl, ap->ioaddr.ctl_addr); + ap->last_ctl = tf->ctl; + } else { + WARN_ON(1); + } + } +} + +static u8 octeon_cf_check_status16(struct ata_port *ap) +{ + u16 blob; + void __iomem *base = ap->ioaddr.data_addr; + + blob = __raw_readw(base + 6); + return blob >> 8; +} + +static int octeon_cf_softreset16(struct ata_link *link, unsigned int *classes, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + void __iomem *base = ap->ioaddr.data_addr; + int rc; + u8 err; + + DPRINTK("about to softreset\n"); + __raw_writew(ap->ctl, base + 0xe); + udelay(20); + __raw_writew(ap->ctl | ATA_SRST, base + 0xe); + udelay(20); + __raw_writew(ap->ctl, base + 0xe); + + rc = ata_sff_wait_after_reset(link, 1, deadline); + if (rc) { + ata_link_err(link, "SRST failed (errno=%d)\n", rc); + return rc; + } + + /* determine by signature whether we have ATA or ATAPI devices */ + classes[0] = ata_sff_dev_classify(&link->device[0], 1, &err); + DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); + return 0; +} + +/** + * Load the taskfile for 16bit non-True IDE only. The device_addr is + * not loaded, we do this as part of octeon_cf_exec_command16. + */ +static void octeon_cf_tf_load16(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + /* The base of the registers is at ioaddr.data_addr. */ + void __iomem *base = ap->ioaddr.data_addr; + + if (tf->ctl != ap->last_ctl) { + iowrite8(tf->ctl, ap->ioaddr.ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + __raw_writew(tf->hob_feature << 8, base + 0xc); + __raw_writew(tf->hob_nsect | tf->hob_lbal << 8, base + 2); + __raw_writew(tf->hob_lbam | tf->hob_lbah << 8, base + 4); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + if (is_addr) { + __raw_writew(tf->feature << 8, base + 0xc); + __raw_writew(tf->nsect | tf->lbal << 8, base + 2); + __raw_writew(tf->lbam | tf->lbah << 8, base + 4); + VPRINTK("feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + ata_wait_idle(ap); +} + + +static void octeon_cf_dev_select(struct ata_port *ap, unsigned int device) +{ +/* There is only one device, do nothing. */ + return; +} + +/* + * Issue ATA command to host controller. The device_addr is also sent + * as it must be written in a combined write with the command. + */ +static void octeon_cf_exec_command16(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + /* The base of the registers is at ioaddr.data_addr. */ + void __iomem *base = ap->ioaddr.data_addr; + u16 blob; + + if (tf->flags & ATA_TFLAG_DEVICE) { + VPRINTK("device 0x%X\n", tf->device); + blob = tf->device; + } else { + blob = 0; + } + + DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); + blob |= (tf->command << 8); + __raw_writew(blob, base + 6); + + + ata_wait_idle(ap); +} + +static void octeon_cf_ata_port_noaction(struct ata_port *ap) +{ +} + +static void octeon_cf_dma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct octeon_cf_port *cf_port; + + cf_port = ap->private_data; + DPRINTK("ENTER\n"); + /* issue r/w command */ + qc->cursg = qc->sg; + cf_port->dma_finished = 0; + ap->ops->sff_exec_command(ap, &qc->tf); + DPRINTK("EXIT\n"); +} + +/** + * Start a DMA transfer that was already setup + * + * @qc: Information about the DMA + */ +static void octeon_cf_dma_start(struct ata_queued_cmd *qc) +{ + struct octeon_cf_port *cf_port = qc->ap->private_data; + union cvmx_mio_boot_dma_cfgx mio_boot_dma_cfg; + union cvmx_mio_boot_dma_intx mio_boot_dma_int; + struct scatterlist *sg; + + VPRINTK("%d scatterlists\n", qc->n_elem); + + /* Get the scatter list entry we need to DMA into */ + sg = qc->cursg; + BUG_ON(!sg); + + /* + * Clear the DMA complete status. + */ + mio_boot_dma_int.u64 = 0; + mio_boot_dma_int.s.done = 1; + cvmx_write_csr(cf_port->dma_base + DMA_INT, mio_boot_dma_int.u64); + + /* Enable the interrupt. */ + cvmx_write_csr(cf_port->dma_base + DMA_INT_EN, mio_boot_dma_int.u64); + + /* Set the direction of the DMA */ + mio_boot_dma_cfg.u64 = 0; +#ifdef __LITTLE_ENDIAN + mio_boot_dma_cfg.s.endian = 1; +#endif + mio_boot_dma_cfg.s.en = 1; + mio_boot_dma_cfg.s.rw = ((qc->tf.flags & ATA_TFLAG_WRITE) != 0); + + /* + * Don't stop the DMA if the device deasserts DMARQ. Many + * compact flashes deassert DMARQ for a short time between + * sectors. Instead of stopping and restarting the DMA, we'll + * let the hardware do it. If the DMA is really stopped early + * due to an error condition, a later timeout will force us to + * stop. + */ + mio_boot_dma_cfg.s.clr = 0; + + /* Size is specified in 16bit words and minus one notation */ + mio_boot_dma_cfg.s.size = sg_dma_len(sg) / 2 - 1; + + /* We need to swap the high and low bytes of every 16 bits */ + mio_boot_dma_cfg.s.swap8 = 1; + + mio_boot_dma_cfg.s.adr = sg_dma_address(sg); + + VPRINTK("%s %d bytes address=%p\n", + (mio_boot_dma_cfg.s.rw) ? "write" : "read", sg->length, + (void *)(unsigned long)mio_boot_dma_cfg.s.adr); + + cvmx_write_csr(cf_port->dma_base + DMA_CFG, mio_boot_dma_cfg.u64); +} + +/** + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + */ +static unsigned int octeon_cf_dma_finished(struct ata_port *ap, + struct ata_queued_cmd *qc) +{ + struct ata_eh_info *ehi = &ap->link.eh_info; + struct octeon_cf_port *cf_port = ap->private_data; + union cvmx_mio_boot_dma_cfgx dma_cfg; + union cvmx_mio_boot_dma_intx dma_int; + u8 status; + + VPRINTK("ata%u: protocol %d task_state %d\n", + ap->print_id, qc->tf.protocol, ap->hsm_task_state); + + + if (ap->hsm_task_state != HSM_ST_LAST) + return 0; + + dma_cfg.u64 = cvmx_read_csr(cf_port->dma_base + DMA_CFG); + if (dma_cfg.s.size != 0xfffff) { + /* Error, the transfer was not complete. */ + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } + + /* Stop and clear the dma engine. */ + dma_cfg.u64 = 0; + dma_cfg.s.size = -1; + cvmx_write_csr(cf_port->dma_base + DMA_CFG, dma_cfg.u64); + + /* Disable the interrupt. */ + dma_int.u64 = 0; + cvmx_write_csr(cf_port->dma_base + DMA_INT_EN, dma_int.u64); + + /* Clear the DMA complete status */ + dma_int.s.done = 1; + cvmx_write_csr(cf_port->dma_base + DMA_INT, dma_int.u64); + + status = ap->ops->sff_check_status(ap); + + ata_sff_hsm_move(ap, qc, status, 0); + + if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA)) + ata_ehi_push_desc(ehi, "DMA stat 0x%x", status); + + return 1; +} + +/* + * Check if any queued commands have more DMAs, if so start the next + * transfer, else do end of transfer handling. + */ +static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + struct octeon_cf_port *cf_port; + int i; + unsigned int handled = 0; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + DPRINTK("ENTER\n"); + for (i = 0; i < host->n_ports; i++) { + u8 status; + struct ata_port *ap; + struct ata_queued_cmd *qc; + union cvmx_mio_boot_dma_intx dma_int; + union cvmx_mio_boot_dma_cfgx dma_cfg; + + ap = host->ports[i]; + cf_port = ap->private_data; + + dma_int.u64 = cvmx_read_csr(cf_port->dma_base + DMA_INT); + dma_cfg.u64 = cvmx_read_csr(cf_port->dma_base + DMA_CFG); + + qc = ata_qc_from_tag(ap, ap->link.active_tag); + + if (!qc || (qc->tf.flags & ATA_TFLAG_POLLING)) + continue; + + if (dma_int.s.done && !dma_cfg.s.en) { + if (!sg_is_last(qc->cursg)) { + qc->cursg = sg_next(qc->cursg); + handled = 1; + octeon_cf_dma_start(qc); + continue; + } else { + cf_port->dma_finished = 1; + } + } + if (!cf_port->dma_finished) + continue; + status = ioread8(ap->ioaddr.altstatus_addr); + if (status & (ATA_BUSY | ATA_DRQ)) { + /* + * We are busy, try to handle it later. This + * is the DMA finished interrupt, and it could + * take a little while for the card to be + * ready for more commands. + */ + /* Clear DMA irq. */ + dma_int.u64 = 0; + dma_int.s.done = 1; + cvmx_write_csr(cf_port->dma_base + DMA_INT, + dma_int.u64); + hrtimer_start_range_ns(&cf_port->delayed_finish, + ns_to_ktime(OCTEON_CF_BUSY_POLL_INTERVAL), + OCTEON_CF_BUSY_POLL_INTERVAL / 5, + HRTIMER_MODE_REL); + handled = 1; + } else { + handled |= octeon_cf_dma_finished(ap, qc); + } + } + spin_unlock_irqrestore(&host->lock, flags); + DPRINTK("EXIT\n"); + return IRQ_RETVAL(handled); +} + +static enum hrtimer_restart octeon_cf_delayed_finish(struct hrtimer *hrt) +{ + struct octeon_cf_port *cf_port = container_of(hrt, + struct octeon_cf_port, + delayed_finish); + struct ata_port *ap = cf_port->ap; + struct ata_host *host = ap->host; + struct ata_queued_cmd *qc; + unsigned long flags; + u8 status; + enum hrtimer_restart rv = HRTIMER_NORESTART; + + spin_lock_irqsave(&host->lock, flags); + + /* + * If the port is not waiting for completion, it must have + * handled it previously. The hsm_task_state is + * protected by host->lock. + */ + if (ap->hsm_task_state != HSM_ST_LAST || !cf_port->dma_finished) + goto out; + + status = ioread8(ap->ioaddr.altstatus_addr); + if (status & (ATA_BUSY | ATA_DRQ)) { + /* Still busy, try again. */ + hrtimer_forward_now(hrt, + ns_to_ktime(OCTEON_CF_BUSY_POLL_INTERVAL)); + rv = HRTIMER_RESTART; + goto out; + } + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) + octeon_cf_dma_finished(ap, qc); +out: + spin_unlock_irqrestore(&host->lock, flags); + return rv; +} + +static void octeon_cf_dev_config(struct ata_device *dev) +{ + /* + * A maximum of 2^20 - 1 16 bit transfers are possible with + * the bootbus DMA. So we need to throttle max_sectors to + * (2^12 - 1 == 4095) to assure that this can never happen. + */ + dev->max_sectors = min(dev->max_sectors, 4095U); +} + +/* + * We don't do ATAPI DMA so return 0. + */ +static int octeon_cf_check_atapi_dma(struct ata_queued_cmd *qc) +{ + return 0; +} + +static unsigned int octeon_cf_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); + + ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */ + octeon_cf_dma_setup(qc); /* set up dma */ + octeon_cf_dma_start(qc); /* initiate dma */ + ap->hsm_task_state = HSM_ST_LAST; + break; + + case ATAPI_PROT_DMA: + dev_err(ap->dev, "Error, ATAPI not supported\n"); + BUG(); + + default: + return ata_sff_qc_issue(qc); + } + + return 0; +} + +static struct ata_port_operations octeon_cf_ops = { + .inherits = &ata_sff_port_ops, + .check_atapi_dma = octeon_cf_check_atapi_dma, + .qc_prep = ata_noop_qc_prep, + .qc_issue = octeon_cf_qc_issue, + .sff_dev_select = octeon_cf_dev_select, + .sff_irq_on = octeon_cf_ata_port_noaction, + .sff_irq_clear = octeon_cf_ata_port_noaction, + .cable_detect = ata_cable_40wire, + .set_piomode = octeon_cf_set_piomode, + .set_dmamode = octeon_cf_set_dmamode, + .dev_config = octeon_cf_dev_config, +}; + +static int octeon_cf_probe(struct platform_device *pdev) +{ + struct resource *res_cs0, *res_cs1; + + bool is_16bit; + const __be32 *cs_num; + struct property *reg_prop; + int n_addr, n_size, reg_len; + struct device_node *node; + const void *prop; + void __iomem *cs0; + void __iomem *cs1 = NULL; + struct ata_host *host; + struct ata_port *ap; + int irq = 0; + irq_handler_t irq_handler = NULL; + void __iomem *base; + struct octeon_cf_port *cf_port; + int rv = -ENOMEM; + + + node = pdev->dev.of_node; + if (node == NULL) + return -EINVAL; + + cf_port = devm_kzalloc(&pdev->dev, sizeof(*cf_port), GFP_KERNEL); + if (!cf_port) + return -ENOMEM; + + cf_port->is_true_ide = (of_find_property(node, "cavium,true-ide", NULL) != NULL); + + prop = of_get_property(node, "cavium,bus-width", NULL); + if (prop) + is_16bit = (be32_to_cpup(prop) == 16); + else + is_16bit = false; + + n_addr = of_n_addr_cells(node); + n_size = of_n_size_cells(node); + + reg_prop = of_find_property(node, "reg", ®_len); + if (!reg_prop || reg_len < sizeof(__be32)) + return -EINVAL; + + cs_num = reg_prop->value; + cf_port->cs0 = be32_to_cpup(cs_num); + + if (cf_port->is_true_ide) { + struct device_node *dma_node; + dma_node = of_parse_phandle(node, + "cavium,dma-engine-handle", 0); + if (dma_node) { + struct platform_device *dma_dev; + dma_dev = of_find_device_by_node(dma_node); + if (dma_dev) { + struct resource *res_dma; + int i; + res_dma = platform_get_resource(dma_dev, IORESOURCE_MEM, 0); + if (!res_dma) { + of_node_put(dma_node); + return -EINVAL; + } + cf_port->dma_base = (u64)devm_ioremap_nocache(&pdev->dev, res_dma->start, + resource_size(res_dma)); + if (!cf_port->dma_base) { + of_node_put(dma_node); + return -EINVAL; + } + + irq_handler = octeon_cf_interrupt; + i = platform_get_irq(dma_dev, 0); + if (i > 0) + irq = i; + } + of_node_put(dma_node); + } + res_cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res_cs1) + return -EINVAL; + + cs1 = devm_ioremap_nocache(&pdev->dev, res_cs1->start, + resource_size(res_cs1)); + if (!cs1) + return rv; + + if (reg_len < (n_addr + n_size + 1) * sizeof(__be32)) + return -EINVAL; + + cs_num += n_addr + n_size; + cf_port->cs1 = be32_to_cpup(cs_num); + } + + res_cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_cs0) + return -EINVAL; + + cs0 = devm_ioremap_nocache(&pdev->dev, res_cs0->start, + resource_size(res_cs0)); + if (!cs0) + return rv; + + /* allocate host */ + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + return rv; + + ap = host->ports[0]; + ap->private_data = cf_port; + pdev->dev.platform_data = cf_port; + cf_port->ap = ap; + ap->ops = &octeon_cf_ops; + ap->pio_mask = ATA_PIO6; + ap->flags |= ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING; + + if (!is_16bit) { + base = cs0 + 0x800; + ap->ioaddr.cmd_addr = base; + ata_sff_std_ports(&ap->ioaddr); + + ap->ioaddr.altstatus_addr = base + 0xe; + ap->ioaddr.ctl_addr = base + 0xe; + octeon_cf_ops.sff_data_xfer = octeon_cf_data_xfer8; + } else if (cf_port->is_true_ide) { + base = cs0; + ap->ioaddr.cmd_addr = base + (ATA_REG_CMD << 1) + 1; + ap->ioaddr.data_addr = base + (ATA_REG_DATA << 1); + ap->ioaddr.error_addr = base + (ATA_REG_ERR << 1) + 1; + ap->ioaddr.feature_addr = base + (ATA_REG_FEATURE << 1) + 1; + ap->ioaddr.nsect_addr = base + (ATA_REG_NSECT << 1) + 1; + ap->ioaddr.lbal_addr = base + (ATA_REG_LBAL << 1) + 1; + ap->ioaddr.lbam_addr = base + (ATA_REG_LBAM << 1) + 1; + ap->ioaddr.lbah_addr = base + (ATA_REG_LBAH << 1) + 1; + ap->ioaddr.device_addr = base + (ATA_REG_DEVICE << 1) + 1; + ap->ioaddr.status_addr = base + (ATA_REG_STATUS << 1) + 1; + ap->ioaddr.command_addr = base + (ATA_REG_CMD << 1) + 1; + ap->ioaddr.altstatus_addr = cs1 + (6 << 1) + 1; + ap->ioaddr.ctl_addr = cs1 + (6 << 1) + 1; + octeon_cf_ops.sff_data_xfer = octeon_cf_data_xfer16; + + ap->mwdma_mask = enable_dma ? ATA_MWDMA4 : 0; + + /* True IDE mode needs a timer to poll for not-busy. */ + hrtimer_init(&cf_port->delayed_finish, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + cf_port->delayed_finish.function = octeon_cf_delayed_finish; + } else { + /* 16 bit but not True IDE */ + base = cs0 + 0x800; + octeon_cf_ops.sff_data_xfer = octeon_cf_data_xfer16; + octeon_cf_ops.softreset = octeon_cf_softreset16; + octeon_cf_ops.sff_check_status = octeon_cf_check_status16; + octeon_cf_ops.sff_tf_read = octeon_cf_tf_read16; + octeon_cf_ops.sff_tf_load = octeon_cf_tf_load16; + octeon_cf_ops.sff_exec_command = octeon_cf_exec_command16; + + ap->ioaddr.data_addr = base + ATA_REG_DATA; + ap->ioaddr.nsect_addr = base + ATA_REG_NSECT; + ap->ioaddr.lbal_addr = base + ATA_REG_LBAL; + ap->ioaddr.ctl_addr = base + 0xe; + ap->ioaddr.altstatus_addr = base + 0xe; + } + cf_port->c0 = ap->ioaddr.ctl_addr; + + rv = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + if (rv) + return rv; + + ata_port_desc(ap, "cmd %p ctl %p", base, ap->ioaddr.ctl_addr); + + dev_info(&pdev->dev, "version " DRV_VERSION" %d bit%s.\n", + is_16bit ? 16 : 8, + cf_port->is_true_ide ? ", True IDE" : ""); + + return ata_host_activate(host, irq, irq_handler, + IRQF_SHARED, &octeon_cf_sht); +} + +static void octeon_cf_shutdown(struct device *dev) +{ + union cvmx_mio_boot_dma_cfgx dma_cfg; + union cvmx_mio_boot_dma_intx dma_int; + + struct octeon_cf_port *cf_port = dev_get_platdata(dev); + + if (cf_port->dma_base) { + /* Stop and clear the dma engine. */ + dma_cfg.u64 = 0; + dma_cfg.s.size = -1; + cvmx_write_csr(cf_port->dma_base + DMA_CFG, dma_cfg.u64); + + /* Disable the interrupt. */ + dma_int.u64 = 0; + cvmx_write_csr(cf_port->dma_base + DMA_INT_EN, dma_int.u64); + + /* Clear the DMA complete status */ + dma_int.s.done = 1; + cvmx_write_csr(cf_port->dma_base + DMA_INT, dma_int.u64); + + __raw_writeb(0, cf_port->c0); + udelay(20); + __raw_writeb(ATA_SRST, cf_port->c0); + udelay(20); + __raw_writeb(0, cf_port->c0); + mdelay(100); + } +} + +static struct of_device_id octeon_cf_match[] = { + { + .compatible = "cavium,ebt3000-compact-flash", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, octeon_cf_match); + +static struct platform_driver octeon_cf_driver = { + .probe = octeon_cf_probe, + .driver = { + .name = DRV_NAME, + .of_match_table = octeon_cf_match, + .shutdown = octeon_cf_shutdown + }, +}; + +static int __init octeon_cf_init(void) +{ + return platform_driver_register(&octeon_cf_driver); +} + + +MODULE_AUTHOR("David Daney "); +MODULE_DESCRIPTION("low-level driver for Cavium OCTEON Compact Flash PATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("platform:" DRV_NAME); + +module_init(octeon_cf_init); diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c new file mode 100644 index 000000000..b6b7af894 --- /dev/null +++ b/drivers/ata/pata_of_platform.c @@ -0,0 +1,94 @@ +/* + * OF-platform PATA driver + * + * Copyright (c) 2007 MontaVista Software, Inc. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_of_platform" + +static struct scsi_host_template pata_platform_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static int pata_of_platform_probe(struct platform_device *ofdev) +{ + int ret; + struct device_node *dn = ofdev->dev.of_node; + struct resource io_res; + struct resource ctl_res; + struct resource *irq_res; + unsigned int reg_shift = 0; + int pio_mode = 0; + int pio_mask; + const u32 *prop; + + ret = of_address_to_resource(dn, 0, &io_res); + if (ret) { + dev_err(&ofdev->dev, "can't get IO address from " + "device tree\n"); + return -EINVAL; + } + + ret = of_address_to_resource(dn, 1, &ctl_res); + if (ret) { + dev_err(&ofdev->dev, "can't get CTL address from " + "device tree\n"); + return -EINVAL; + } + + irq_res = platform_get_resource(ofdev, IORESOURCE_IRQ, 0); + + prop = of_get_property(dn, "reg-shift", NULL); + if (prop) + reg_shift = be32_to_cpup(prop); + + prop = of_get_property(dn, "pio-mode", NULL); + if (prop) { + pio_mode = be32_to_cpup(prop); + if (pio_mode > 6) { + dev_err(&ofdev->dev, "invalid pio-mode\n"); + return -EINVAL; + } + } else { + dev_info(&ofdev->dev, "pio-mode unspecified, assuming PIO0\n"); + } + + pio_mask = 1 << pio_mode; + pio_mask |= (1 << pio_mode) - 1; + + return __pata_platform_probe(&ofdev->dev, &io_res, &ctl_res, irq_res, + reg_shift, pio_mask, &pata_platform_sht); +} + +static struct of_device_id pata_of_platform_match[] = { + { .compatible = "ata-generic", }, + { }, +}; +MODULE_DEVICE_TABLE(of, pata_of_platform_match); + +static struct platform_driver pata_of_platform_driver = { + .driver = { + .name = DRV_NAME, + .of_match_table = pata_of_platform_match, + }, + .probe = pata_of_platform_probe, + .remove = ata_platform_remove_one, +}; + +module_platform_driver(pata_of_platform_driver); + +MODULE_DESCRIPTION("OF-platform PATA driver"); +MODULE_AUTHOR("Anton Vorontsov "); +MODULE_LICENSE("GPL"); diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c new file mode 100644 index 000000000..b9bf78b7d --- /dev/null +++ b/drivers/ata/pata_oldpiix.c @@ -0,0 +1,273 @@ +/* + * pata_oldpiix.c - Intel PATA/SATA controllers + * + * (C) 2005 Red Hat + * + * Some parts based on ata_piix.c by Jeff Garzik and others. + * + * Early PIIX differs significantly from the later PIIX as it lacks + * SITRE and the slave timing registers. This means that you have to + * set timing per channel, or be clever. Libata tells us whenever it + * does drive selection and we use this to reload the timings. + * + * Because of these behaviour differences PIIX gets its own driver module. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_oldpiix" +#define DRV_VERSION "0.5.5" + +/** + * oldpiix_pre_reset - probe begin + * @link: ATA link + * @deadline: deadline jiffies for the operation + * + * Set up cable type and use generic probe init + */ + +static int oldpiix_pre_reset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits oldpiix_enable_bits[] = { + { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ + { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ + }; + + if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no])) + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + +/** + * oldpiix_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device whose timings we are configuring + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void oldpiix_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned int idetm_port= ap->port_no ? 0x42 : 0x40; + u16 idetm_data; + int control = 0; + + /* + * See Intel Document 298600-004 for the timing programing rules + * for PIIX/ICH. Note that the early PIIX does not have the slave + * timing port at 0x44. + */ + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + if (pio > 1) + control |= 1; /* TIME */ + if (ata_pio_need_iordy(adev)) + control |= 2; /* IE */ + + /* Intel specifies that the prefetch/posting is for disk only */ + if (adev->class == ATA_DEV_ATA) + control |= 4; /* PPE */ + + pci_read_config_word(dev, idetm_port, &idetm_data); + + /* + * Set PPE, IE and TIME as appropriate. + * Clear the other drive's timing bits. + */ + if (adev->devno == 0) { + idetm_data &= 0xCCE0; + idetm_data |= control; + } else { + idetm_data &= 0xCC0E; + idetm_data |= (control << 4); + } + idetm_data |= (timings[pio][0] << 12) | + (timings[pio][1] << 8); + pci_write_config_word(dev, idetm_port, idetm_data); + + /* Track which port is configured */ + ap->private_data = adev; +} + +/** + * oldpiix_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set MWDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void oldpiix_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u8 idetm_port = ap->port_no ? 0x42 : 0x40; + u16 idetm_data; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + /* + * MWDMA is driven by the PIO timings. We must also enable + * IORDY unconditionally along with TIME1. PPE has already + * been set when the PIO timing was set. + */ + + unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; + unsigned int control; + const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + + pci_read_config_word(dev, idetm_port, &idetm_data); + + control = 3; /* IORDY|TIME0 */ + /* Intel specifies that the PPE functionality is for disk only */ + if (adev->class == ATA_DEV_ATA) + control |= 4; /* PPE enable */ + + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO into PIO0 */ + + if (adev->pio_mode < needed_pio[mwdma]) + /* Enable DMA timing only */ + control |= 8; /* PIO cycles in PIO0 */ + + /* Mask out the relevant control and timing bits we will load. Also + clear the other drive TIME register as a precaution */ + if (adev->devno == 0) { + idetm_data &= 0xCCE0; + idetm_data |= control; + } else { + idetm_data &= 0xCC0E; + idetm_data |= (control << 4); + } + idetm_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); + pci_write_config_word(dev, idetm_port, idetm_data); + + /* Track which port is configured */ + ap->private_data = adev; +} + +/** + * oldpiix_qc_issue - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * necessary. Our logic also clears TIME0/TIME1 for the other device so + * that, even if we get this wrong, cycles to the other device will + * be made PIO0. + */ + +static unsigned int oldpiix_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + if (adev != ap->private_data) { + oldpiix_set_piomode(ap, adev); + if (ata_dma_enabled(adev)) + oldpiix_set_dmamode(ap, adev); + } + return ata_bmdma_qc_issue(qc); +} + + +static struct scsi_host_template oldpiix_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations oldpiix_pata_ops = { + .inherits = &ata_bmdma_port_ops, + .qc_issue = oldpiix_qc_issue, + .cable_detect = ata_cable_40wire, + .set_piomode = oldpiix_set_piomode, + .set_dmamode = oldpiix_set_dmamode, + .prereset = oldpiix_pre_reset, +}; + + +/** + * oldpiix_init_one - Register PIIX ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in oldpiix_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .port_ops = &oldpiix_pata_ops, + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + return ata_pci_bmdma_init_one(pdev, ppi, &oldpiix_sht, NULL, 0); +} + +static const struct pci_device_id oldpiix_pci_tbl[] = { + { PCI_VDEVICE(INTEL, 0x1230), }, + + { } /* terminate list */ +}; + +static struct pci_driver oldpiix_pci_driver = { + .name = DRV_NAME, + .id_table = oldpiix_pci_tbl, + .probe = oldpiix_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(oldpiix_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for early PIIX series controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, oldpiix_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c new file mode 100644 index 000000000..3a944a029 --- /dev/null +++ b/drivers/ata/pata_opti.c @@ -0,0 +1,199 @@ +/* + * pata_opti.c - ATI PATA for new ATA layer + * (C) 2005 Red Hat Inc + * + * Based on + * linux/drivers/ide/pci/opti621.c Version 0.7 Sept 10, 2002 + * + * Copyright (C) 1996-1998 Linus Torvalds & authors (see below) + * + * Authors: + * Jaromir Koutek , + * Jan Harkes , + * Mark Lord + * Some parts of code are from ali14xx.c and from rz1000.c. + * + * Also consulted the FreeBSD prototype driver by Kevin Day to try + * and resolve some confusions. Further documentation can be found in + * Ralf Brown's interrupt list + * + * If you have other variants of the Opti range (Viper/Vendetta) please + * try this driver with those PCI idents and report back. For the later + * chips see the pata_optidma driver + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_opti" +#define DRV_VERSION "0.2.9" + +enum { + READ_REG = 0, /* index of Read cycle timing register */ + WRITE_REG = 1, /* index of Write cycle timing register */ + CNTRL_REG = 3, /* index of Control register */ + STRAP_REG = 5, /* index of Strap register */ + MISC_REG = 6 /* index of Miscellaneous register */ +}; + +/** + * opti_pre_reset - probe begin + * @link: ATA link + * @deadline: deadline jiffies for the operation + * + * Set up cable type and use generic probe init + */ + +static int opti_pre_reset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits opti_enable_bits[] = { + { 0x45, 1, 0x80, 0x00 }, + { 0x40, 1, 0x08, 0x00 } + }; + + if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no])) + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + +/** + * opti_write_reg - control register setup + * @ap: ATA port + * @value: value + * @reg: control register number + * + * The Opti uses magic 'trapdoor' register accesses to do configuration + * rather than using PCI space as other controllers do. The double inw + * on the error register activates configuration mode. We can then write + * the control register + */ + +static void opti_write_reg(struct ata_port *ap, u8 val, int reg) +{ + void __iomem *regio = ap->ioaddr.cmd_addr; + + /* These 3 unlock the control register access */ + ioread16(regio + 1); + ioread16(regio + 1); + iowrite8(3, regio + 2); + + /* Do the I/O */ + iowrite8(val, regio + reg); + + /* Relock */ + iowrite8(0x83, regio + 2); +} + +/** + * opti_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. Timing numbers are taken from + * the FreeBSD driver then pre computed to keep the code clean. There + * are two tables depending on the hardware clock speed. + */ + +static void opti_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_device *pair = ata_dev_pair(adev); + int clock; + int pio = adev->pio_mode - XFER_PIO_0; + void __iomem *regio = ap->ioaddr.cmd_addr; + u8 addr; + + /* Address table precomputed with prefetch off and a DCLK of 2 */ + static const u8 addr_timing[2][5] = { + { 0x30, 0x20, 0x20, 0x10, 0x10 }, + { 0x20, 0x20, 0x10, 0x10, 0x10 } + }; + static const u8 data_rec_timing[2][5] = { + { 0x6B, 0x56, 0x42, 0x32, 0x31 }, + { 0x58, 0x44, 0x32, 0x22, 0x21 } + }; + + iowrite8(0xff, regio + 5); + clock = ioread16(regio + 5) & 1; + + /* + * As with many controllers the address setup time is shared + * and must suit both devices if present. + */ + + addr = addr_timing[clock][pio]; + if (pair) { + /* Hardware constraint */ + u8 pair_addr = addr_timing[clock][pair->pio_mode - XFER_PIO_0]; + if (pair_addr > addr) + addr = pair_addr; + } + + /* Commence primary programming sequence */ + opti_write_reg(ap, adev->devno, MISC_REG); + opti_write_reg(ap, data_rec_timing[clock][pio], READ_REG); + opti_write_reg(ap, data_rec_timing[clock][pio], WRITE_REG); + opti_write_reg(ap, addr, MISC_REG); + + /* Programming sequence complete, override strapping */ + opti_write_reg(ap, 0x85, CNTRL_REG); +} + +static struct scsi_host_template opti_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations opti_port_ops = { + .inherits = &ata_sff_port_ops, + .cable_detect = ata_cable_40wire, + .set_piomode = opti_set_piomode, + .prereset = opti_pre_reset, +}; + +static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .port_ops = &opti_port_ops + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + + ata_print_version_once(&dev->dev, DRV_VERSION); + + return ata_pci_sff_init_one(dev, ppi, &opti_sht, NULL, 0); +} + +static const struct pci_device_id opti[] = { + { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 }, + { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 1 }, + + { }, +}; + +static struct pci_driver opti_pci_driver = { + .name = DRV_NAME, + .id_table = opti, + .probe = opti_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(opti_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Opti 621/621X"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, opti); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c new file mode 100644 index 000000000..bdec7efa4 --- /dev/null +++ b/drivers/ata/pata_optidma.c @@ -0,0 +1,455 @@ +/* + * pata_optidma.c - Opti DMA PATA for new ATA layer + * (C) 2006 Red Hat Inc + * + * The Opti DMA controllers are related to the older PIO PCI controllers + * and indeed the VLB ones. The main differences are that the timing + * numbers are now based off PCI clocks not VLB and differ, and that + * MWDMA is supported. + * + * This driver should support Viper-N+, FireStar, FireStar Plus. + * + * These devices support virtual DMA for read (aka the CS5520). Later + * chips support UDMA33, but only if the rest of the board logic does, + * so you have to get this right. We don't support the virtual DMA + * but we do handle UDMA. + * + * Bits that are worth knowing + * Most control registers are shadowed into I/O registers + * 0x1F5 bit 0 tells you if the PCI/VLB clock is 33 or 25Mhz + * Virtual DMA registers *move* between rev 0x02 and rev 0x10 + * UDMA requires a 66MHz FSB + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_optidma" +#define DRV_VERSION "0.3.2" + +enum { + READ_REG = 0, /* index of Read cycle timing register */ + WRITE_REG = 1, /* index of Write cycle timing register */ + CNTRL_REG = 3, /* index of Control register */ + STRAP_REG = 5, /* index of Strap register */ + MISC_REG = 6 /* index of Miscellaneous register */ +}; + +static int pci_clock; /* 0 = 33 1 = 25 */ + +/** + * optidma_pre_reset - probe begin + * @link: ATA link + * @deadline: deadline jiffies for the operation + * + * Set up cable type and use generic probe init + */ + +static int optidma_pre_reset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits optidma_enable_bits = { + 0x40, 1, 0x08, 0x00 + }; + + if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits)) + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + +/** + * optidma_unlock - unlock control registers + * @ap: ATA port + * + * Unlock the control register block for this adapter. Registers must not + * be unlocked in a situation where libata might look at them. + */ + +static void optidma_unlock(struct ata_port *ap) +{ + void __iomem *regio = ap->ioaddr.cmd_addr; + + /* These 3 unlock the control register access */ + ioread16(regio + 1); + ioread16(regio + 1); + iowrite8(3, regio + 2); +} + +/** + * optidma_lock - issue temporary relock + * @ap: ATA port + * + * Re-lock the configuration register settings. + */ + +static void optidma_lock(struct ata_port *ap) +{ + void __iomem *regio = ap->ioaddr.cmd_addr; + + /* Relock */ + iowrite8(0x83, regio + 2); +} + +/** + * optidma_mode_setup - set mode data + * @ap: ATA interface + * @adev: ATA device + * @mode: Mode to set + * + * Called to do the DMA or PIO mode setup. Timing numbers are all + * pre computed to keep the code clean. There are two tables depending + * on the hardware clock speed. + * + * WARNING: While we do this the IDE registers vanish. If we take an + * IRQ here we depend on the host set locking to avoid catastrophe. + */ + +static void optidma_mode_setup(struct ata_port *ap, struct ata_device *adev, u8 mode) +{ + struct ata_device *pair = ata_dev_pair(adev); + int pio = adev->pio_mode - XFER_PIO_0; + int dma = adev->dma_mode - XFER_MW_DMA_0; + void __iomem *regio = ap->ioaddr.cmd_addr; + u8 addr; + + /* Address table precomputed with a DCLK of 2 */ + static const u8 addr_timing[2][5] = { + { 0x30, 0x20, 0x20, 0x10, 0x10 }, + { 0x20, 0x20, 0x10, 0x10, 0x10 } + }; + static const u8 data_rec_timing[2][5] = { + { 0x59, 0x46, 0x30, 0x20, 0x20 }, + { 0x46, 0x32, 0x20, 0x20, 0x10 } + }; + static const u8 dma_data_rec_timing[2][3] = { + { 0x76, 0x20, 0x20 }, + { 0x54, 0x20, 0x10 } + }; + + /* Switch from IDE to control mode */ + optidma_unlock(ap); + + + /* + * As with many controllers the address setup time is shared + * and must suit both devices if present. FIXME: Check if we + * need to look at slowest of PIO/DMA mode of either device + */ + + if (mode >= XFER_MW_DMA_0) + addr = 0; + else + addr = addr_timing[pci_clock][pio]; + + if (pair) { + u8 pair_addr; + /* Hardware constraint */ + if (pair->dma_mode) + pair_addr = 0; + else + pair_addr = addr_timing[pci_clock][pair->pio_mode - XFER_PIO_0]; + if (pair_addr > addr) + addr = pair_addr; + } + + /* Commence primary programming sequence */ + /* First we load the device number into the timing select */ + iowrite8(adev->devno, regio + MISC_REG); + /* Now we load the data timings into read data/write data */ + if (mode < XFER_MW_DMA_0) { + iowrite8(data_rec_timing[pci_clock][pio], regio + READ_REG); + iowrite8(data_rec_timing[pci_clock][pio], regio + WRITE_REG); + } else if (mode < XFER_UDMA_0) { + iowrite8(dma_data_rec_timing[pci_clock][dma], regio + READ_REG); + iowrite8(dma_data_rec_timing[pci_clock][dma], regio + WRITE_REG); + } + /* Finally we load the address setup into the misc register */ + iowrite8(addr | adev->devno, regio + MISC_REG); + + /* Programming sequence complete, timing 0 dev 0, timing 1 dev 1 */ + iowrite8(0x85, regio + CNTRL_REG); + + /* Switch back to IDE mode */ + optidma_lock(ap); + + /* Note: at this point our programming is incomplete. We are + not supposed to program PCI 0x43 "things we hacked onto the chip" + until we've done both sets of PIO/DMA timings */ +} + +/** + * optiplus_mode_setup - DMA setup for Firestar Plus + * @ap: ATA port + * @adev: device + * @mode: desired mode + * + * The Firestar plus has additional UDMA functionality for UDMA0-2 and + * requires we do some additional work. Because the base work we must do + * is mostly shared we wrap the Firestar setup functionality in this + * one + */ + +static void optiplus_mode_setup(struct ata_port *ap, struct ata_device *adev, u8 mode) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 udcfg; + u8 udslave; + int dev2 = 2 * adev->devno; + int unit = 2 * ap->port_no + adev->devno; + int udma = mode - XFER_UDMA_0; + + pci_read_config_byte(pdev, 0x44, &udcfg); + if (mode <= XFER_UDMA_0) { + udcfg &= ~(1 << unit); + optidma_mode_setup(ap, adev, adev->dma_mode); + } else { + udcfg |= (1 << unit); + if (ap->port_no) { + pci_read_config_byte(pdev, 0x45, &udslave); + udslave &= ~(0x03 << dev2); + udslave |= (udma << dev2); + pci_write_config_byte(pdev, 0x45, udslave); + } else { + udcfg &= ~(0x30 << dev2); + udcfg |= (udma << dev2); + } + } + pci_write_config_byte(pdev, 0x44, udcfg); +} + +/** + * optidma_set_pio_mode - PIO setup callback + * @ap: ATA port + * @adev: Device + * + * The libata core provides separate functions for handling PIO and + * DMA programming. The architecture of the Firestar makes it easier + * for us to have a common function so we provide wrappers + */ + +static void optidma_set_pio_mode(struct ata_port *ap, struct ata_device *adev) +{ + optidma_mode_setup(ap, adev, adev->pio_mode); +} + +/** + * optidma_set_dma_mode - DMA setup callback + * @ap: ATA port + * @adev: Device + * + * The libata core provides separate functions for handling PIO and + * DMA programming. The architecture of the Firestar makes it easier + * for us to have a common function so we provide wrappers + */ + +static void optidma_set_dma_mode(struct ata_port *ap, struct ata_device *adev) +{ + optidma_mode_setup(ap, adev, adev->dma_mode); +} + +/** + * optiplus_set_pio_mode - PIO setup callback + * @ap: ATA port + * @adev: Device + * + * The libata core provides separate functions for handling PIO and + * DMA programming. The architecture of the Firestar makes it easier + * for us to have a common function so we provide wrappers + */ + +static void optiplus_set_pio_mode(struct ata_port *ap, struct ata_device *adev) +{ + optiplus_mode_setup(ap, adev, adev->pio_mode); +} + +/** + * optiplus_set_dma_mode - DMA setup callback + * @ap: ATA port + * @adev: Device + * + * The libata core provides separate functions for handling PIO and + * DMA programming. The architecture of the Firestar makes it easier + * for us to have a common function so we provide wrappers + */ + +static void optiplus_set_dma_mode(struct ata_port *ap, struct ata_device *adev) +{ + optiplus_mode_setup(ap, adev, adev->dma_mode); +} + +/** + * optidma_make_bits - PCI setup helper + * @adev: ATA device + * + * Turn the ATA device setup into PCI configuration bits + * for register 0x43 and return the two bits needed. + */ + +static u8 optidma_make_bits43(struct ata_device *adev) +{ + static const u8 bits43[5] = { + 0, 0, 0, 1, 2 + }; + if (!ata_dev_enabled(adev)) + return 0; + if (adev->dma_mode) + return adev->dma_mode - XFER_MW_DMA_0; + return bits43[adev->pio_mode - XFER_PIO_0]; +} + +/** + * optidma_set_mode - mode setup + * @link: link to set up + * + * Use the standard setup to tune the chipset and then finalise the + * configuration by writing the nibble of extra bits of data into + * the chip. + */ + +static int optidma_set_mode(struct ata_link *link, struct ata_device **r_failed) +{ + struct ata_port *ap = link->ap; + u8 r; + int nybble = 4 * ap->port_no; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int rc = ata_do_set_mode(link, r_failed); + if (rc == 0) { + pci_read_config_byte(pdev, 0x43, &r); + + r &= (0x0F << nybble); + r |= (optidma_make_bits43(&link->device[0]) + + (optidma_make_bits43(&link->device[0]) << 2)) << nybble; + pci_write_config_byte(pdev, 0x43, r); + } + return rc; +} + +static struct scsi_host_template optidma_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations optidma_port_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = ata_cable_40wire, + .set_piomode = optidma_set_pio_mode, + .set_dmamode = optidma_set_dma_mode, + .set_mode = optidma_set_mode, + .prereset = optidma_pre_reset, +}; + +static struct ata_port_operations optiplus_port_ops = { + .inherits = &optidma_port_ops, + .set_piomode = optiplus_set_pio_mode, + .set_dmamode = optiplus_set_dma_mode, +}; + +/** + * optiplus_with_udma - Look for UDMA capable setup + * @pdev; ATA controller + */ + +static int optiplus_with_udma(struct pci_dev *pdev) +{ + u8 r; + int ret = 0; + int ioport = 0x22; + struct pci_dev *dev1; + + /* Find function 1 */ + dev1 = pci_get_device(0x1045, 0xC701, NULL); + if (dev1 == NULL) + return 0; + + /* Rev must be >= 0x10 */ + pci_read_config_byte(dev1, 0x08, &r); + if (r < 0x10) + goto done_nomsg; + /* Read the chipset system configuration to check our mode */ + pci_read_config_byte(dev1, 0x5F, &r); + ioport |= (r << 8); + outb(0x10, ioport); + /* Must be 66Mhz sync */ + if ((inb(ioport + 2) & 1) == 0) + goto done; + + /* Check the ATA arbitration/timing is suitable */ + pci_read_config_byte(pdev, 0x42, &r); + if ((r & 0x36) != 0x36) + goto done; + pci_read_config_byte(dev1, 0x52, &r); + if (r & 0x80) /* IDEDIR disabled */ + ret = 1; +done: + printk(KERN_WARNING "UDMA not supported in this configuration.\n"); +done_nomsg: /* Wrong chip revision */ + pci_dev_put(dev1); + return ret; +} + +static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static const struct ata_port_info info_82c700 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .port_ops = &optidma_port_ops + }; + static const struct ata_port_info info_82c700_udma = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, + .port_ops = &optiplus_port_ops + }; + const struct ata_port_info *ppi[] = { &info_82c700, NULL }; + int rc; + + ata_print_version_once(&dev->dev, DRV_VERSION); + + rc = pcim_enable_device(dev); + if (rc) + return rc; + + /* Fixed location chipset magic */ + inw(0x1F1); + inw(0x1F1); + pci_clock = inb(0x1F5) & 1; /* 0 = 33Mhz, 1 = 25Mhz */ + + if (optiplus_with_udma(dev)) + ppi[0] = &info_82c700_udma; + + return ata_pci_bmdma_init_one(dev, ppi, &optidma_sht, NULL, 0); +} + +static const struct pci_device_id optidma[] = { + { PCI_VDEVICE(OPTI, 0xD568), }, /* Opti 82C700 */ + + { }, +}; + +static struct pci_driver optidma_pci_driver = { + .name = DRV_NAME, + .id_table = optidma, + .probe = optidma_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(optidma_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Opti Firestar/Firestar Plus"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, optidma); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c new file mode 100644 index 000000000..8c0d7d736 --- /dev/null +++ b/drivers/ata/pata_palmld.c @@ -0,0 +1,137 @@ +/* + * drivers/ata/pata_palmld.c + * + * Driver for IDE channel in Palm LifeDrive + * + * Based on research of: + * Alex Osborne + * + * Rewrite for mainline: + * Marek Vasut + * + * Rewritten version based on pata_ixp4xx_cf.c: + * ixp4xx PATA/Compact Flash driver + * Copyright (C) 2006-07 Tower Technologies + * Author: Alessandro Zummo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DRV_NAME "pata_palmld" + +static struct gpio palmld_hdd_gpios[] = { + { GPIO_NR_PALMLD_IDE_PWEN, GPIOF_INIT_HIGH, "HDD Power" }, + { GPIO_NR_PALMLD_IDE_RESET, GPIOF_INIT_LOW, "HDD Reset" }, +}; + +static struct scsi_host_template palmld_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations palmld_port_ops = { + .inherits = &ata_sff_port_ops, + .sff_data_xfer = ata_sff_data_xfer_noirq, + .cable_detect = ata_cable_40wire, +}; + +static int palmld_pata_probe(struct platform_device *pdev) +{ + struct ata_host *host; + struct ata_port *ap; + void __iomem *mem; + int ret; + + /* allocate host */ + host = ata_host_alloc(&pdev->dev, 1); + if (!host) { + ret = -ENOMEM; + goto err1; + } + + /* remap drive's physical memory address */ + mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000); + if (!mem) { + ret = -ENOMEM; + goto err1; + } + + /* request and activate power GPIO, IRQ GPIO */ + ret = gpio_request_array(palmld_hdd_gpios, + ARRAY_SIZE(palmld_hdd_gpios)); + if (ret) + goto err1; + + /* reset the drive */ + gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0); + msleep(30); + gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 1); + msleep(30); + + /* setup the ata port */ + ap = host->ports[0]; + ap->ops = &palmld_port_ops; + ap->pio_mask = ATA_PIO4; + ap->flags |= ATA_FLAG_PIO_POLLING; + + /* memory mapping voodoo */ + ap->ioaddr.cmd_addr = mem + 0x10; + ap->ioaddr.altstatus_addr = mem + 0xe; + ap->ioaddr.ctl_addr = mem + 0xe; + + /* start the port */ + ata_sff_std_ports(&ap->ioaddr); + + /* activate host */ + ret = ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING, + &palmld_sht); + if (ret) + goto err2; + + return ret; + +err2: + gpio_free_array(palmld_hdd_gpios, ARRAY_SIZE(palmld_hdd_gpios)); +err1: + return ret; +} + +static int palmld_pata_remove(struct platform_device *dev) +{ + ata_platform_remove_one(dev); + + /* power down the HDD */ + gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0); + + gpio_free_array(palmld_hdd_gpios, ARRAY_SIZE(palmld_hdd_gpios)); + + return 0; +} + +static struct platform_driver palmld_pata_platform_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = palmld_pata_probe, + .remove = palmld_pata_remove, +}; + +module_platform_driver(palmld_pata_platform_driver); + +MODULE_AUTHOR("Marek Vasut "); +MODULE_DESCRIPTION("PalmLD PATA driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c new file mode 100644 index 000000000..bcc4b968c --- /dev/null +++ b/drivers/ata/pata_pcmcia.c @@ -0,0 +1,394 @@ +/* + * pata_pcmcia.c - PCMCIA PATA controller driver. + * Copyright 2005-2006 Red Hat Inc, all rights reserved. + * PCMCIA ident update Copyright 2006 Marcin Juszkiewicz + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Heavily based upon ide-cs.c + * The initial developer of the original code is David A. Hinds + * . Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + + +#define DRV_NAME "pata_pcmcia" +#define DRV_VERSION "0.3.5" + +/** + * pcmcia_set_mode - PCMCIA specific mode setup + * @link: link + * @r_failed_dev: Return pointer for failed device + * + * Perform the tuning and setup of the devices and timings, which + * for PCMCIA is the same as any other controller. We wrap it however + * as we need to spot hardware with incorrect or missing master/slave + * decode, which alas is embarrassingly common in the PC world + */ + +static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) +{ + struct ata_device *master = &link->device[0]; + struct ata_device *slave = &link->device[1]; + + if (!ata_dev_enabled(master) || !ata_dev_enabled(slave)) + return ata_do_set_mode(link, r_failed_dev); + + if (memcmp(master->id + ATA_ID_FW_REV, slave->id + ATA_ID_FW_REV, + ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0) { + /* Suspicious match, but could be two cards from + the same vendor - check serial */ + if (memcmp(master->id + ATA_ID_SERNO, slave->id + ATA_ID_SERNO, + ATA_ID_SERNO_LEN) == 0 && master->id[ATA_ID_SERNO] >> 8) { + ata_dev_warn(slave, "is a ghost device, ignoring\n"); + ata_dev_disable(slave); + } + } + return ata_do_set_mode(link, r_failed_dev); +} + +/** + * pcmcia_set_mode_8bit - PCMCIA specific mode setup + * @link: link + * @r_failed_dev: Return pointer for failed device + * + * For the simple emulated 8bit stuff the less we do the better. + */ + +static int pcmcia_set_mode_8bit(struct ata_link *link, + struct ata_device **r_failed_dev) +{ + return 0; +} + +/** + * ata_data_xfer_8bit - Transfer data by 8bit PIO + * @dev: device to target + * @buf: data buffer + * @buflen: buffer length + * @rw: read/write + * + * Transfer data from/to the device data register by 8 bit PIO. + * + * LOCKING: + * Inherited from caller. + */ + +static unsigned int ata_data_xfer_8bit(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) +{ + struct ata_port *ap = dev->link->ap; + + if (rw == READ) + ioread8_rep(ap->ioaddr.data_addr, buf, buflen); + else + iowrite8_rep(ap->ioaddr.data_addr, buf, buflen); + + return buflen; +} + +/** + * pcmcia_8bit_drain_fifo - Stock FIFO drain logic for SFF controllers + * @qc: command + * + * Drain the FIFO and device of any stuck data following a command + * failing to complete. In some cases this is necessary before a + * reset will recover the device. + * + */ + +static void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc) +{ + int count; + struct ata_port *ap; + + /* We only need to flush incoming data when a command was running */ + if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) + return; + + ap = qc->ap; + + /* Drain up to 64K of data before we give up this recovery method */ + for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) + && count++ < 65536;) + ioread8(ap->ioaddr.data_addr); + + if (count) + ata_port_warn(ap, "drained %d bytes to clear DRQ\n", count); + +} + +static struct scsi_host_template pcmcia_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations pcmcia_port_ops = { + .inherits = &ata_sff_port_ops, + .sff_data_xfer = ata_sff_data_xfer_noirq, + .cable_detect = ata_cable_40wire, + .set_mode = pcmcia_set_mode, +}; + +static struct ata_port_operations pcmcia_8bit_port_ops = { + .inherits = &ata_sff_port_ops, + .sff_data_xfer = ata_data_xfer_8bit, + .cable_detect = ata_cable_40wire, + .set_mode = pcmcia_set_mode_8bit, + .sff_drain_fifo = pcmcia_8bit_drain_fifo, +}; + + +static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data) +{ + int *is_kme = priv_data; + + if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH) + != IO_DATA_PATH_WIDTH_8) { + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + } + pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pdev->resource[1]->end) { + pdev->resource[0]->end = 8; + pdev->resource[1]->end = (*is_kme) ? 2 : 1; + } else { + if (pdev->resource[0]->end < 16) + return -ENODEV; + } + + return pcmcia_request_io(pdev); +} + +/** + * pcmcia_init_one - attach a PCMCIA interface + * @pdev: pcmcia device + * + * Register a PCMCIA IDE interface. Such interfaces are PIO 0 and + * shared IRQ. + */ + +static int pcmcia_init_one(struct pcmcia_device *pdev) +{ + struct ata_host *host; + struct ata_port *ap; + int is_kme = 0, ret = -ENOMEM, p; + unsigned long io_base, ctl_base; + void __iomem *io_addr, *ctl_addr; + int n_ports = 1; + struct ata_port_operations *ops = &pcmcia_port_ops; + + /* Set up attributes in order to probe card and get resources */ + pdev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO | + CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; + + /* See if we have a manufacturer identifier. Use it to set is_kme for + vendor quirks */ + is_kme = ((pdev->manf_id == MANFID_KME) && + ((pdev->card_id == PRODID_KME_KXLC005_A) || + (pdev->card_id == PRODID_KME_KXLC005_B))); + + if (pcmcia_loop_config(pdev, pcmcia_check_one_config, &is_kme)) { + pdev->config_flags &= ~CONF_AUTO_CHECK_VCC; + if (pcmcia_loop_config(pdev, pcmcia_check_one_config, &is_kme)) + goto failed; /* No suitable config found */ + } + io_base = pdev->resource[0]->start; + if (pdev->resource[1]->end) + ctl_base = pdev->resource[1]->start; + else + ctl_base = pdev->resource[0]->start + 0x0e; + + if (!pdev->irq) + goto failed; + + ret = pcmcia_enable_device(pdev); + if (ret) + goto failed; + + /* iomap */ + ret = -ENOMEM; + io_addr = devm_ioport_map(&pdev->dev, io_base, 8); + ctl_addr = devm_ioport_map(&pdev->dev, ctl_base, 1); + if (!io_addr || !ctl_addr) + goto failed; + + /* Success. Disable the IRQ nIEN line, do quirks */ + iowrite8(0x02, ctl_addr); + if (is_kme) + iowrite8(0x81, ctl_addr + 0x01); + + /* FIXME: Could be more ports at base + 0x10 but we only deal with + one right now */ + if (resource_size(pdev->resource[0]) >= 0x20) + n_ports = 2; + + if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620) + ops = &pcmcia_8bit_port_ops; + /* + * Having done the PCMCIA plumbing the ATA side is relatively + * sane. + */ + ret = -ENOMEM; + host = ata_host_alloc(&pdev->dev, n_ports); + if (!host) + goto failed; + + for (p = 0; p < n_ports; p++) { + ap = host->ports[p]; + + ap->ops = ops; + ap->pio_mask = ATA_PIO0; /* ISA so PIO 0 cycles */ + ap->flags |= ATA_FLAG_SLAVE_POSS; + ap->ioaddr.cmd_addr = io_addr + 0x10 * p; + ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p; + ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p; + ata_sff_std_ports(&ap->ioaddr); + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base); + } + + /* activate */ + ret = ata_host_activate(host, pdev->irq, ata_sff_interrupt, + IRQF_SHARED, &pcmcia_sht); + if (ret) + goto failed; + + pdev->priv = host; + return 0; + +failed: + pcmcia_disable_device(pdev); + return ret; +} + +/** + * pcmcia_remove_one - unplug an pcmcia interface + * @pdev: pcmcia device + * + * A PCMCIA ATA device has been unplugged. Perform the needed + * cleanup. Also called on module unload for any active devices. + */ + +static void pcmcia_remove_one(struct pcmcia_device *pdev) +{ + struct ata_host *host = pdev->priv; + + if (host) + ata_host_detach(host); + + pcmcia_disable_device(pdev); +} + +static const struct pcmcia_device_id pcmcia_devices[] = { + PCMCIA_DEVICE_FUNC_ID(4), + PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */ + PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */ + PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */ + PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */ + PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), + PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904), + PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */ + PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */ + PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */ + PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ + PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), + PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ + PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */ + PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001), + PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */ + PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */ + PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0), + PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74), + PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9), + PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591), + PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728), + PCMCIA_DEVICE_PROD_ID12("CNF ", "CD-ROM", 0x46d7db81, 0x66536591), + PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591), + PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4), + PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde), + PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf), + PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591), + PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728), + PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e), + PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae), + PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178), + PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420), + PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), + PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), + PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb), + PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10), + PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e), + PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), + PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), + PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee), + PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), + PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), + PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), + PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728), + PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1), + PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883), + PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d), + PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), + PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), + PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47), + PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), + PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918), + PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), + PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), + PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506), + PCMCIA_DEVICE_NULL, +}; + +MODULE_DEVICE_TABLE(pcmcia, pcmcia_devices); + +static struct pcmcia_driver pcmcia_driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + .id_table = pcmcia_devices, + .probe = pcmcia_init_one, + .remove = pcmcia_remove_one, +}; +module_pcmcia_driver(pcmcia_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for PCMCIA ATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c new file mode 100644 index 000000000..d9ef9e276 --- /dev/null +++ b/drivers/ata/pata_pdc2027x.c @@ -0,0 +1,789 @@ +/* + * Promise PATA TX2/TX4/TX2000/133 IDE driver for pdc20268 to pdc20277. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Ported to libata by: + * Albert Lee IBM Corporation + * + * Copyright (C) 1998-2002 Andre Hedrick + * Portions Copyright (C) 1999 Promise Technology, Inc. + * + * Author: Frank Tiernan (frankt@promise.com) + * Released under terms of General Public License + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware information only available under NDA. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_pdc2027x" +#define DRV_VERSION "1.0" +#undef PDC_DEBUG + +#ifdef PDC_DEBUG +#define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) +#else +#define PDPRINTK(fmt, args...) +#endif + +enum { + PDC_MMIO_BAR = 5, + + PDC_UDMA_100 = 0, + PDC_UDMA_133 = 1, + + PDC_100_MHZ = 100000000, + PDC_133_MHZ = 133333333, + + PDC_SYS_CTL = 0x1100, + PDC_ATA_CTL = 0x1104, + PDC_GLOBAL_CTL = 0x1108, + PDC_CTCR0 = 0x110C, + PDC_CTCR1 = 0x1110, + PDC_BYTE_COUNT = 0x1120, + PDC_PLL_CTL = 0x1202, +}; + +static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +#ifdef CONFIG_PM_SLEEP +static int pdc2027x_reinit_one(struct pci_dev *pdev); +#endif +static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline); +static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev); +static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev); +static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc); +static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask); +static int pdc2027x_cable_detect(struct ata_port *ap); +static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed); + +/* + * ATA Timing Tables based on 133MHz controller clock. + * These tables are only used when the controller is in 133MHz clock. + * If the controller is in 100MHz clock, the ASIC hardware will + * set the timing registers automatically when "set feature" command + * is issued to the device. However, if the controller clock is 133MHz, + * the following tables must be used. + */ +static struct pdc2027x_pio_timing { + u8 value0, value1, value2; +} pdc2027x_pio_timing_tbl [] = { + { 0xfb, 0x2b, 0xac }, /* PIO mode 0 */ + { 0x46, 0x29, 0xa4 }, /* PIO mode 1 */ + { 0x23, 0x26, 0x64 }, /* PIO mode 2 */ + { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */ + { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */ +}; + +static struct pdc2027x_mdma_timing { + u8 value0, value1; +} pdc2027x_mdma_timing_tbl [] = { + { 0xdf, 0x5f }, /* MDMA mode 0 */ + { 0x6b, 0x27 }, /* MDMA mode 1 */ + { 0x69, 0x25 }, /* MDMA mode 2 */ +}; + +static struct pdc2027x_udma_timing { + u8 value0, value1, value2; +} pdc2027x_udma_timing_tbl [] = { + { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */ + { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */ + { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */ + { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */ + { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */ + { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */ + { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ +}; + +static const struct pci_device_id pdc2027x_pci_tbl[] = { + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20268), PDC_UDMA_100 }, + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20269), PDC_UDMA_133 }, + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20270), PDC_UDMA_100 }, + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20271), PDC_UDMA_133 }, + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20275), PDC_UDMA_133 }, + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20276), PDC_UDMA_133 }, + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20277), PDC_UDMA_133 }, + + { } /* terminate list */ +}; + +static struct pci_driver pdc2027x_pci_driver = { + .name = DRV_NAME, + .id_table = pdc2027x_pci_tbl, + .probe = pdc2027x_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = pdc2027x_reinit_one, +#endif +}; + +static struct scsi_host_template pdc2027x_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations pdc2027x_pata100_ops = { + .inherits = &ata_bmdma_port_ops, + .check_atapi_dma = pdc2027x_check_atapi_dma, + .cable_detect = pdc2027x_cable_detect, + .prereset = pdc2027x_prereset, +}; + +static struct ata_port_operations pdc2027x_pata133_ops = { + .inherits = &pdc2027x_pata100_ops, + .mode_filter = pdc2027x_mode_filter, + .set_piomode = pdc2027x_set_piomode, + .set_dmamode = pdc2027x_set_dmamode, + .set_mode = pdc2027x_set_mode, +}; + +static struct ata_port_info pdc2027x_port_info[] = { + /* PDC_UDMA_100 */ + { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &pdc2027x_pata100_ops, + }, + /* PDC_UDMA_133 */ + { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &pdc2027x_pata133_ops, + }, +}; + +MODULE_AUTHOR("Andre Hedrick, Frank Tiernan, Albert Lee"); +MODULE_DESCRIPTION("libata driver module for Promise PDC20268 to PDC20277"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_DEVICE_TABLE(pci, pdc2027x_pci_tbl); + +/** + * port_mmio - Get the MMIO address of PDC2027x extended registers + * @ap: Port + * @offset: offset from mmio base + */ +static inline void __iomem *port_mmio(struct ata_port *ap, unsigned int offset) +{ + return ap->host->iomap[PDC_MMIO_BAR] + ap->port_no * 0x100 + offset; +} + +/** + * dev_mmio - Get the MMIO address of PDC2027x extended registers + * @ap: Port + * @adev: device + * @offset: offset from mmio base + */ +static inline void __iomem *dev_mmio(struct ata_port *ap, struct ata_device *adev, unsigned int offset) +{ + u8 adj = (adev->devno) ? 0x08 : 0x00; + return port_mmio(ap, offset) + adj; +} + +/** + * pdc2027x_pata_cable_detect - Probe host controller cable detect info + * @ap: Port for which cable detect info is desired + * + * Read 80c cable indicator from Promise extended register. + * This register is latched when the system is reset. + * + * LOCKING: + * None (inherited from caller). + */ +static int pdc2027x_cable_detect(struct ata_port *ap) +{ + u32 cgcr; + + /* check cable detect results */ + cgcr = ioread32(port_mmio(ap, PDC_GLOBAL_CTL)); + if (cgcr & (1 << 26)) + goto cbl40; + + PDPRINTK("No cable or 80-conductor cable on port %d\n", ap->port_no); + + return ATA_CBL_PATA80; +cbl40: + printk(KERN_INFO DRV_NAME ": 40-conductor cable detected on port %d\n", ap->port_no); + return ATA_CBL_PATA40; +} + +/** + * pdc2027x_port_enabled - Check PDC ATA control register to see whether the port is enabled. + * @ap: Port to check + */ +static inline int pdc2027x_port_enabled(struct ata_port *ap) +{ + return ioread8(port_mmio(ap, PDC_ATA_CTL)) & 0x02; +} + +/** + * pdc2027x_prereset - prereset for PATA host controller + * @link: Target link + * @deadline: deadline jiffies for the operation + * + * Probeinit including cable detection. + * + * LOCKING: + * None (inherited from caller). + */ + +static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline) +{ + /* Check whether port enabled */ + if (!pdc2027x_port_enabled(link->ap)) + return -ENOENT; + return ata_sff_prereset(link, deadline); +} + +/** + * pdc2720x_mode_filter - mode selection filter + * @adev: ATA device + * @mask: list of modes proposed + * + * Block UDMA on devices that cause trouble with this controller. + */ + +static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask) +{ + unsigned char model_num[ATA_ID_PROD_LEN + 1]; + struct ata_device *pair = ata_dev_pair(adev); + + if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL) + return mask; + + /* Check for slave of a Maxtor at UDMA6 */ + ata_id_c_string(pair->id, model_num, ATA_ID_PROD, + ATA_ID_PROD_LEN + 1); + /* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */ + if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6) + mask &= ~ (1 << (6 + ATA_SHIFT_UDMA)); + + return mask; +} + +/** + * pdc2027x_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port to configure + * @adev: um + * + * Set PIO mode for device. + * + * LOCKING: + * None (inherited from caller). + */ + +static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + u32 ctcr0, ctcr1; + + PDPRINTK("adev->pio_mode[%X]\n", adev->pio_mode); + + /* Sanity check */ + if (pio > 4) { + printk(KERN_ERR DRV_NAME ": Unknown pio mode [%d] ignored\n", pio); + return; + + } + + /* Set the PIO timing registers using value table for 133MHz */ + PDPRINTK("Set pio regs... \n"); + + ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0)); + ctcr0 &= 0xffff0000; + ctcr0 |= pdc2027x_pio_timing_tbl[pio].value0 | + (pdc2027x_pio_timing_tbl[pio].value1 << 8); + iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0)); + + ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1)); + ctcr1 &= 0x00ffffff; + ctcr1 |= (pdc2027x_pio_timing_tbl[pio].value2 << 24); + iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1)); + + PDPRINTK("Set pio regs done\n"); + + PDPRINTK("Set to pio mode[%u] \n", pio); +} + +/** + * pdc2027x_set_dmamode - Initialize host controller PATA UDMA timings + * @ap: Port to configure + * @adev: um + * + * Set UDMA mode for device. + * + * LOCKING: + * None (inherited from caller). + */ +static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned int dma_mode = adev->dma_mode; + u32 ctcr0, ctcr1; + + if ((dma_mode >= XFER_UDMA_0) && + (dma_mode <= XFER_UDMA_6)) { + /* Set the UDMA timing registers with value table for 133MHz */ + unsigned int udma_mode = dma_mode & 0x07; + + if (dma_mode == XFER_UDMA_2) { + /* + * Turn off tHOLD. + * If tHOLD is '1', the hardware will add half clock for data hold time. + * This code segment seems to be no effect. tHOLD will be overwritten below. + */ + ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1)); + iowrite32(ctcr1 & ~(1 << 7), dev_mmio(ap, adev, PDC_CTCR1)); + } + + PDPRINTK("Set udma regs... \n"); + + ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1)); + ctcr1 &= 0xff000000; + ctcr1 |= pdc2027x_udma_timing_tbl[udma_mode].value0 | + (pdc2027x_udma_timing_tbl[udma_mode].value1 << 8) | + (pdc2027x_udma_timing_tbl[udma_mode].value2 << 16); + iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1)); + + PDPRINTK("Set udma regs done\n"); + + PDPRINTK("Set to udma mode[%u] \n", udma_mode); + + } else if ((dma_mode >= XFER_MW_DMA_0) && + (dma_mode <= XFER_MW_DMA_2)) { + /* Set the MDMA timing registers with value table for 133MHz */ + unsigned int mdma_mode = dma_mode & 0x07; + + PDPRINTK("Set mdma regs... \n"); + ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0)); + + ctcr0 &= 0x0000ffff; + ctcr0 |= (pdc2027x_mdma_timing_tbl[mdma_mode].value0 << 16) | + (pdc2027x_mdma_timing_tbl[mdma_mode].value1 << 24); + + iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0)); + PDPRINTK("Set mdma regs done\n"); + + PDPRINTK("Set to mdma mode[%u] \n", mdma_mode); + } else { + printk(KERN_ERR DRV_NAME ": Unknown dma mode [%u] ignored\n", dma_mode); + } +} + +/** + * pdc2027x_set_mode - Set the timing registers back to correct values. + * @link: link to configure + * @r_failed: Returned device for failure + * + * The pdc2027x hardware will look at "SET FEATURES" and change the timing registers + * automatically. The values set by the hardware might be incorrect, under 133Mhz PLL. + * This function overwrites the possibly incorrect values set by the hardware to be correct. + */ +static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed) +{ + struct ata_port *ap = link->ap; + struct ata_device *dev; + int rc; + + rc = ata_do_set_mode(link, r_failed); + if (rc < 0) + return rc; + + ata_for_each_dev(dev, link, ENABLED) { + pdc2027x_set_piomode(ap, dev); + + /* + * Enable prefetch if the device support PIO only. + */ + if (dev->xfer_shift == ATA_SHIFT_PIO) { + u32 ctcr1 = ioread32(dev_mmio(ap, dev, PDC_CTCR1)); + ctcr1 |= (1 << 25); + iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1)); + + PDPRINTK("Turn on prefetch\n"); + } else { + pdc2027x_set_dmamode(ap, dev); + } + } + return 0; +} + +/** + * pdc2027x_check_atapi_dma - Check whether ATAPI DMA can be supported for this command + * @qc: Metadata associated with taskfile to check + * + * LOCKING: + * None (inherited from caller). + * + * RETURNS: 0 when ATAPI DMA can be used + * 1 otherwise + */ +static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + u8 *scsicmd = cmd->cmnd; + int rc = 1; /* atapi dma off by default */ + + /* + * This workaround is from Promise's GPL driver. + * If ATAPI DMA is used for commands not in the + * following white list, say MODE_SENSE and REQUEST_SENSE, + * pdc2027x might hit the irq lost problem. + */ + switch (scsicmd[0]) { + case READ_10: + case WRITE_10: + case READ_12: + case WRITE_12: + case READ_6: + case WRITE_6: + case 0xad: /* READ_DVD_STRUCTURE */ + case 0xbe: /* READ_CD */ + /* ATAPI DMA is ok */ + rc = 0; + break; + default: + ; + } + + return rc; +} + +/** + * pdc_read_counter - Read the ctr counter + * @host: target ATA host + */ + +static long pdc_read_counter(struct ata_host *host) +{ + void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR]; + long counter; + int retry = 1; + u32 bccrl, bccrh, bccrlv, bccrhv; + +retry: + bccrl = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff; + bccrh = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff; + + /* Read the counter values again for verification */ + bccrlv = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff; + bccrhv = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff; + + counter = (bccrh << 15) | bccrl; + + PDPRINTK("bccrh [%X] bccrl [%X]\n", bccrh, bccrl); + PDPRINTK("bccrhv[%X] bccrlv[%X]\n", bccrhv, bccrlv); + + /* + * The 30-bit decreasing counter are read by 2 pieces. + * Incorrect value may be read when both bccrh and bccrl are changing. + * Ex. When 7900 decrease to 78FF, wrong value 7800 might be read. + */ + if (retry && !(bccrh == bccrhv && bccrl >= bccrlv)) { + retry--; + PDPRINTK("rereading counter\n"); + goto retry; + } + + return counter; +} + +/** + * adjust_pll - Adjust the PLL input clock in Hz. + * + * @pdc_controller: controller specific information + * @host: target ATA host + * @pll_clock: The input of PLL in HZ + */ +static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int board_idx) +{ + void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR]; + u16 pll_ctl; + long pll_clock_khz = pll_clock / 1000; + long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ; + long ratio = pout_required / pll_clock_khz; + int F, R; + + /* Sanity check */ + if (unlikely(pll_clock_khz < 5000L || pll_clock_khz > 70000L)) { + printk(KERN_ERR DRV_NAME ": Invalid PLL input clock %ldkHz, give up!\n", pll_clock_khz); + return; + } + +#ifdef PDC_DEBUG + PDPRINTK("pout_required is %ld\n", pout_required); + + /* Show the current clock value of PLL control register + * (maybe already configured by the firmware) + */ + pll_ctl = ioread16(mmio_base + PDC_PLL_CTL); + + PDPRINTK("pll_ctl[%X]\n", pll_ctl); +#endif + + /* + * Calculate the ratio of F, R and OD + * POUT = (F + 2) / (( R + 2) * NO) + */ + if (ratio < 8600L) { /* 8.6x */ + /* Using NO = 0x01, R = 0x0D */ + R = 0x0d; + } else if (ratio < 12900L) { /* 12.9x */ + /* Using NO = 0x01, R = 0x08 */ + R = 0x08; + } else if (ratio < 16100L) { /* 16.1x */ + /* Using NO = 0x01, R = 0x06 */ + R = 0x06; + } else if (ratio < 64000L) { /* 64x */ + R = 0x00; + } else { + /* Invalid ratio */ + printk(KERN_ERR DRV_NAME ": Invalid ratio %ld, give up!\n", ratio); + return; + } + + F = (ratio * (R+2)) / 1000 - 2; + + if (unlikely(F < 0 || F > 127)) { + /* Invalid F */ + printk(KERN_ERR DRV_NAME ": F[%d] invalid!\n", F); + return; + } + + PDPRINTK("F[%d] R[%d] ratio*1000[%ld]\n", F, R, ratio); + + pll_ctl = (R << 8) | F; + + PDPRINTK("Writing pll_ctl[%X]\n", pll_ctl); + + iowrite16(pll_ctl, mmio_base + PDC_PLL_CTL); + ioread16(mmio_base + PDC_PLL_CTL); /* flush */ + + /* Wait the PLL circuit to be stable */ + mdelay(30); + +#ifdef PDC_DEBUG + /* + * Show the current clock value of PLL control register + * (maybe configured by the firmware) + */ + pll_ctl = ioread16(mmio_base + PDC_PLL_CTL); + + PDPRINTK("pll_ctl[%X]\n", pll_ctl); +#endif + + return; +} + +/** + * detect_pll_input_clock - Detect the PLL input clock in Hz. + * @host: target ATA host + * Ex. 16949000 on 33MHz PCI bus for pdc20275. + * Half of the PCI clock. + */ +static long pdc_detect_pll_input_clock(struct ata_host *host) +{ + void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR]; + u32 scr; + long start_count, end_count; + ktime_t start_time, end_time; + long pll_clock, usec_elapsed; + + /* Start the test mode */ + scr = ioread32(mmio_base + PDC_SYS_CTL); + PDPRINTK("scr[%X]\n", scr); + iowrite32(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL); + ioread32(mmio_base + PDC_SYS_CTL); /* flush */ + + /* Read current counter value */ + start_count = pdc_read_counter(host); + start_time = ktime_get(); + + /* Let the counter run for 100 ms. */ + mdelay(100); + + /* Read the counter values again */ + end_count = pdc_read_counter(host); + end_time = ktime_get(); + + /* Stop the test mode */ + scr = ioread32(mmio_base + PDC_SYS_CTL); + PDPRINTK("scr[%X]\n", scr); + iowrite32(scr & ~(0x01 << 14), mmio_base + PDC_SYS_CTL); + ioread32(mmio_base + PDC_SYS_CTL); /* flush */ + + /* calculate the input clock in Hz */ + usec_elapsed = (long) ktime_us_delta(end_time, start_time); + + pll_clock = ((start_count - end_count) & 0x3fffffff) / 100 * + (100000000 / usec_elapsed); + + PDPRINTK("start[%ld] end[%ld] \n", start_count, end_count); + PDPRINTK("PLL input clock[%ld]Hz\n", pll_clock); + + return pll_clock; +} + +/** + * pdc_hardware_init - Initialize the hardware. + * @host: target ATA host + * @board_idx: board identifier + */ +static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx) +{ + long pll_clock; + + /* + * Detect PLL input clock rate. + * On some system, where PCI bus is running at non-standard clock rate. + * Ex. 25MHz or 40MHz, we have to adjust the cycle_time. + * The pdc20275 controller employs PLL circuit to help correct timing registers setting. + */ + pll_clock = pdc_detect_pll_input_clock(host); + + dev_info(host->dev, "PLL input clock %ld kHz\n", pll_clock/1000); + + /* Adjust PLL control register */ + pdc_adjust_pll(host, pll_clock, board_idx); + + return 0; +} + +/** + * pdc_ata_setup_port - setup the mmio address + * @port: ata ioports to setup + * @base: base address + */ +static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base) +{ + port->cmd_addr = + port->data_addr = base; + port->feature_addr = + port->error_addr = base + 0x05; + port->nsect_addr = base + 0x0a; + port->lbal_addr = base + 0x0f; + port->lbam_addr = base + 0x10; + port->lbah_addr = base + 0x15; + port->device_addr = base + 0x1a; + port->command_addr = + port->status_addr = base + 0x1f; + port->altstatus_addr = + port->ctl_addr = base + 0x81a; +} + +/** + * pdc2027x_init_one - PCI probe function + * Called when an instance of PCI adapter is inserted. + * This function checks whether the hardware is supported, + * initialize hardware and register an instance of ata_host to + * libata. (implements struct pci_driver.probe() ) + * + * @pdev: instance of pci_dev found + * @ent: matching entry in the id_tbl[] + */ +static int pdc2027x_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static const unsigned long cmd_offset[] = { 0x17c0, 0x15c0 }; + static const unsigned long bmdma_offset[] = { 0x1000, 0x1008 }; + unsigned int board_idx = (unsigned int) ent->driver_data; + const struct ata_port_info *ppi[] = + { &pdc2027x_port_info[board_idx], NULL }; + struct ata_host *host; + void __iomem *mmio_base; + int i, rc; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* alloc host */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2); + if (!host) + return -ENOMEM; + + /* acquire resources and fill host */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME); + if (rc) + return rc; + host->iomap = pcim_iomap_table(pdev); + + rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + + rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + + mmio_base = host->iomap[PDC_MMIO_BAR]; + + for (i = 0; i < 2; i++) { + struct ata_port *ap = host->ports[i]; + + pdc_ata_setup_port(&ap->ioaddr, mmio_base + cmd_offset[i]); + ap->ioaddr.bmdma_addr = mmio_base + bmdma_offset[i]; + + ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, PDC_MMIO_BAR, cmd_offset[i], "cmd"); + } + + //pci_enable_intx(pdev); + + /* initialize adapter */ + if (pdc_hardware_init(host, board_idx) != 0) + return -EIO; + + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, + IRQF_SHARED, &pdc2027x_sht); +} + +#ifdef CONFIG_PM_SLEEP +static int pdc2027x_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + unsigned int board_idx; + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + if (pdev->device == PCI_DEVICE_ID_PROMISE_20268 || + pdev->device == PCI_DEVICE_ID_PROMISE_20270) + board_idx = PDC_UDMA_100; + else + board_idx = PDC_UDMA_133; + + if (pdc_hardware_init(host, board_idx)) + return -EIO; + + ata_host_resume(host); + return 0; +} +#endif + +module_pci_driver(pdc2027x_pci_driver); diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c new file mode 100644 index 000000000..9001991d2 --- /dev/null +++ b/drivers/ata/pata_pdc202xx_old.c @@ -0,0 +1,392 @@ +/* + * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * (C) 2007,2009,2010 Bartlomiej Zolnierkiewicz + * + * Based in part on linux/drivers/ide/pci/pdc202xx_old.c + * + * First cut with LBA48/ATAPI + * + * TODO: + * Channel interlock/reset on both required ? + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_pdc202xx_old" +#define DRV_VERSION "0.4.3" + +static int pdc2026x_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 cis; + + pci_read_config_word(pdev, 0x50, &cis); + if (cis & (1 << (10 + ap->port_no))) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + +static void pdc202xx_exec_command(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); + + iowrite8(tf->command, ap->ioaddr.command_addr); + ndelay(400); +} + +static bool pdc202xx_irq_check(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long master = pci_resource_start(pdev, 4); + u8 sc1d = inb(master + 0x1d); + + if (ap->port_no) { + /* + * bit 7: error, bit 6: interrupting, + * bit 5: FIFO full, bit 4: FIFO empty + */ + return sc1d & 0x40; + } else { + /* + * bit 3: error, bit 2: interrupting, + * bit 1: FIFO full, bit 0: FIFO empty + */ + return sc1d & 0x04; + } +} + +/** + * pdc202xx_configure_piomode - set chip PIO timing + * @ap: ATA interface + * @adev: ATA device + * @pio: PIO mode + * + * Called to do the PIO mode setup. Our timing registers are shared + * so a configure_dmamode call will undo any work we do here and vice + * versa + */ + +static void pdc202xx_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = 0x60 + 8 * ap->port_no + 4 * adev->devno; + static u16 pio_timing[5] = { + 0x0913, 0x050C , 0x0308, 0x0206, 0x0104 + }; + u8 r_ap, r_bp; + + pci_read_config_byte(pdev, port, &r_ap); + pci_read_config_byte(pdev, port + 1, &r_bp); + r_ap &= ~0x3F; /* Preserve ERRDY_EN, SYNC_IN */ + r_bp &= ~0x1F; + r_ap |= (pio_timing[pio] >> 8); + r_bp |= (pio_timing[pio] & 0xFF); + + if (ata_pio_need_iordy(adev)) + r_ap |= 0x20; /* IORDY enable */ + if (adev->class == ATA_DEV_ATA) + r_ap |= 0x10; /* FIFO enable */ + pci_write_config_byte(pdev, port, r_ap); + pci_write_config_byte(pdev, port + 1, r_bp); +} + +/** + * pdc202xx_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. Our timing registers are shared + * but we want to set the PIO timing by default. + */ + +static void pdc202xx_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + pdc202xx_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0); +} + +/** + * pdc202xx_configure_dmamode - set DMA mode in chip + * @ap: ATA interface + * @adev: ATA device + * + * Load DMA cycle times into the chip ready for a DMA transfer + * to occur. + */ + +static void pdc202xx_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = 0x60 + 8 * ap->port_no + 4 * adev->devno; + static u8 udma_timing[6][2] = { + { 0x60, 0x03 }, /* 33 Mhz Clock */ + { 0x40, 0x02 }, + { 0x20, 0x01 }, + { 0x40, 0x02 }, /* 66 Mhz Clock */ + { 0x20, 0x01 }, + { 0x20, 0x01 } + }; + static u8 mdma_timing[3][2] = { + { 0xe0, 0x0f }, + { 0x60, 0x04 }, + { 0x60, 0x03 }, + }; + u8 r_bp, r_cp; + + pci_read_config_byte(pdev, port + 1, &r_bp); + pci_read_config_byte(pdev, port + 2, &r_cp); + + r_bp &= ~0xE0; + r_cp &= ~0x0F; + + if (adev->dma_mode >= XFER_UDMA_0) { + int speed = adev->dma_mode - XFER_UDMA_0; + r_bp |= udma_timing[speed][0]; + r_cp |= udma_timing[speed][1]; + + } else { + int speed = adev->dma_mode - XFER_MW_DMA_0; + r_bp |= mdma_timing[speed][0]; + r_cp |= mdma_timing[speed][1]; + } + pci_write_config_byte(pdev, port + 1, r_bp); + pci_write_config_byte(pdev, port + 2, r_cp); + +} + +/** + * pdc2026x_bmdma_start - DMA engine begin + * @qc: ATA command + * + * In UDMA3 or higher we have to clock switch for the duration of the + * DMA transfer sequence. + * + * Note: The host lock held by the libata layer protects + * us from two channels both trying to set DMA bits at once + */ + +static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct ata_taskfile *tf = &qc->tf; + int sel66 = ap->port_no ? 0x08: 0x02; + + void __iomem *master = ap->host->ports[0]->ioaddr.bmdma_addr; + void __iomem *clock = master + 0x11; + void __iomem *atapi_reg = master + 0x20 + (4 * ap->port_no); + + u32 len; + + /* Check we keep host level locking here */ + if (adev->dma_mode > XFER_UDMA_2) + iowrite8(ioread8(clock) | sel66, clock); + else + iowrite8(ioread8(clock) & ~sel66, clock); + + /* The DMA clocks may have been trashed by a reset. FIXME: make conditional + and move to qc_issue ? */ + pdc202xx_set_dmamode(ap, qc->dev); + + /* Cases the state machine will not complete correctly without help */ + if ((tf->flags & ATA_TFLAG_LBA48) || tf->protocol == ATAPI_PROT_DMA) { + len = qc->nbytes / 2; + + if (tf->flags & ATA_TFLAG_WRITE) + len |= 0x06000000; + else + len |= 0x05000000; + + iowrite32(len, atapi_reg); + } + + /* Activate DMA */ + ata_bmdma_start(qc); +} + +/** + * pdc2026x_bmdma_end - DMA engine stop + * @qc: ATA command + * + * After a DMA completes we need to put the clock back to 33MHz for + * PIO timings. + * + * Note: The host lock held by the libata layer protects + * us from two channels both trying to set DMA bits at once + */ + +static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct ata_taskfile *tf = &qc->tf; + + int sel66 = ap->port_no ? 0x08: 0x02; + /* The clock bits are in the same register for both channels */ + void __iomem *master = ap->host->ports[0]->ioaddr.bmdma_addr; + void __iomem *clock = master + 0x11; + void __iomem *atapi_reg = master + 0x20 + (4 * ap->port_no); + + /* Cases the state machine will not complete correctly */ + if (tf->protocol == ATAPI_PROT_DMA || (tf->flags & ATA_TFLAG_LBA48)) { + iowrite32(0, atapi_reg); + iowrite8(ioread8(clock) & ~sel66, clock); + } + /* Flip back to 33Mhz for PIO */ + if (adev->dma_mode > XFER_UDMA_2) + iowrite8(ioread8(clock) & ~sel66, clock); + ata_bmdma_stop(qc); + pdc202xx_set_piomode(ap, adev); +} + +/** + * pdc2026x_dev_config - device setup hook + * @adev: newly found device + * + * Perform chip specific early setup. We need to lock the transfer + * sizes to 8bit to avoid making the state engine on the 2026x cards + * barf. + */ + +static void pdc2026x_dev_config(struct ata_device *adev) +{ + adev->max_sectors = 256; +} + +static int pdc2026x_port_start(struct ata_port *ap) +{ + void __iomem *bmdma = ap->ioaddr.bmdma_addr; + if (bmdma) { + /* Enable burst mode */ + u8 burst = ioread8(bmdma + 0x1f); + iowrite8(burst | 0x01, bmdma + 0x1f); + } + return ata_bmdma_port_start(ap); +} + +/** + * pdc2026x_check_atapi_dma - Check whether ATAPI DMA can be supported for this command + * @qc: Metadata associated with taskfile to check + * + * Just say no - not supported on older Promise. + * + * LOCKING: + * None (inherited from caller). + * + * RETURNS: 0 when ATAPI DMA can be used + * 1 otherwise + */ + +static int pdc2026x_check_atapi_dma(struct ata_queued_cmd *qc) +{ + return 1; +} + +static struct scsi_host_template pdc202xx_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations pdc2024x_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .cable_detect = ata_cable_40wire, + .set_piomode = pdc202xx_set_piomode, + .set_dmamode = pdc202xx_set_dmamode, + + .sff_exec_command = pdc202xx_exec_command, + .sff_irq_check = pdc202xx_irq_check, +}; + +static struct ata_port_operations pdc2026x_port_ops = { + .inherits = &pdc2024x_port_ops, + + .check_atapi_dma = pdc2026x_check_atapi_dma, + .bmdma_start = pdc2026x_bmdma_start, + .bmdma_stop = pdc2026x_bmdma_stop, + + .cable_detect = pdc2026x_cable_detect, + .dev_config = pdc2026x_dev_config, + + .port_start = pdc2026x_port_start, + + .sff_exec_command = pdc202xx_exec_command, + .sff_irq_check = pdc202xx_irq_check, +}; + +static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static const struct ata_port_info info[3] = { + { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, + .port_ops = &pdc2024x_port_ops + }, + { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, + .port_ops = &pdc2026x_port_ops + }, + { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &pdc2026x_port_ops + } + + }; + const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL }; + + if (dev->device == PCI_DEVICE_ID_PROMISE_20265) { + struct pci_dev *bridge = dev->bus->self; + /* Don't grab anything behind a Promise I2O RAID */ + if (bridge && bridge->vendor == PCI_VENDOR_ID_INTEL) { + if (bridge->device == PCI_DEVICE_ID_INTEL_I960) + return -ENODEV; + if (bridge->device == PCI_DEVICE_ID_INTEL_I960RM) + return -ENODEV; + } + } + return ata_pci_bmdma_init_one(dev, ppi, &pdc202xx_sht, NULL, 0); +} + +static const struct pci_device_id pdc202xx[] = { + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0 }, + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1 }, + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1 }, + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20265), 2 }, + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20267), 2 }, + + { }, +}; + +static struct pci_driver pdc202xx_pci_driver = { + .name = DRV_NAME, + .id_table = pdc202xx, + .probe = pdc202xx_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(pdc202xx_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Promise 2024x and 20262-20267"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, pdc202xx); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_piccolo.c b/drivers/ata/pata_piccolo.c new file mode 100644 index 000000000..35cb0e263 --- /dev/null +++ b/drivers/ata/pata_piccolo.c @@ -0,0 +1,125 @@ +/* + * pata_piccolo.c - Toshiba Piccolo PATA/SATA controller driver. + * + * This is basically an update to ata_generic.c to add Toshiba Piccolo support + * then split out to keep ata_generic "clean". + * + * Copyright 2005 Red Hat Inc, all rights reserved. + * + * Elements from ide/pci/generic.c + * Copyright (C) 2001-2002 Andre Hedrick + * Portions (C) Copyright 2002 Red Hat Inc + * + * May be copied or modified under the terms of the GNU General Public License + * + * The timing data tables/programming info are courtesy of the NetBSD driver + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_piccolo" +#define DRV_VERSION "0.0.1" + + + +static void tosh_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const u16 pio[6] = { /* For reg 0x50 low word & E088 */ + 0x0566, 0x0433, 0x0311, 0x0201, 0x0200, 0x0100 + }; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 conf; + pci_read_config_word(pdev, 0x50, &conf); + conf &= 0xE088; + conf |= pio[adev->pio_mode - XFER_PIO_0]; + pci_write_config_word(pdev, 0x50, conf); +} + +static void tosh_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 conf; + pci_read_config_dword(pdev, 0x5C, &conf); + conf &= 0x78FFE088; /* Keep the other bits */ + if (adev->dma_mode >= XFER_UDMA_0) { + int udma = adev->dma_mode - XFER_UDMA_0; + conf |= 0x80000000; + conf |= (udma + 2) << 28; + conf |= (2 - udma) * 0x111; /* spread into three nibbles */ + } else { + static const u32 mwdma[4] = { + 0x0655, 0x0200, 0x0200, 0x0100 + }; + conf |= mwdma[adev->dma_mode - XFER_MW_DMA_0]; + } + pci_write_config_dword(pdev, 0x5C, conf); +} + + +static struct scsi_host_template tosh_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations tosh_port_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = ata_cable_unknown, + .set_piomode = tosh_set_piomode, + .set_dmamode = tosh_set_dmamode +}; + +/** + * ata_tosh_init - attach generic IDE + * @dev: PCI device found + * @id: match entry + * + * Called each time a matching IDE interface is found. We check if the + * interface is one we wish to claim and if so we perform any chip + * specific hacks then let the ATA layer do the heavy lifting. + */ + +static int ata_tosh_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO5, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, + .port_ops = &tosh_port_ops + }; + const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; + /* Just one port for the moment */ + return ata_pci_bmdma_init_one(dev, ppi, &tosh_sht, NULL, 0); +} + +static struct pci_device_id ata_tosh[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_3), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), }, + { 0, }, +}; + +static struct pci_driver ata_tosh_pci_driver = { + .name = DRV_NAME, + .id_table = ata_tosh, + .probe = ata_tosh_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(ata_tosh_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("Low level driver for Toshiba Piccolo ATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ata_tosh); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c new file mode 100644 index 000000000..c503ded87 --- /dev/null +++ b/drivers/ata/pata_platform.c @@ -0,0 +1,240 @@ +/* + * Generic platform device PATA driver + * + * Copyright (C) 2006 - 2007 Paul Mundt + * + * Based on pata_pcmcia: + * + * Copyright 2005-2006 Red Hat Inc, all rights reserved. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_platform" +#define DRV_VERSION "1.2" + +static int pio_mask = 1; + +/* + * Provide our own set_mode() as we don't want to change anything that has + * already been configured.. + */ +static int pata_platform_set_mode(struct ata_link *link, struct ata_device **unused) +{ + struct ata_device *dev; + + ata_for_each_dev(dev, link, ENABLED) { + /* We don't really care */ + dev->pio_mode = dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + ata_dev_info(dev, "configured for PIO\n"); + } + return 0; +} + +static struct scsi_host_template pata_platform_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations pata_platform_port_ops = { + .inherits = &ata_sff_port_ops, + .sff_data_xfer = ata_sff_data_xfer_noirq, + .cable_detect = ata_cable_unknown, + .set_mode = pata_platform_set_mode, +}; + +static void pata_platform_setup_port(struct ata_ioports *ioaddr, + unsigned int shift) +{ + /* Fixup the port shift for platforms that need it */ + ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << shift); + ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << shift); + ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << shift); + ioaddr->nsect_addr = ioaddr->cmd_addr + (ATA_REG_NSECT << shift); + ioaddr->lbal_addr = ioaddr->cmd_addr + (ATA_REG_LBAL << shift); + ioaddr->lbam_addr = ioaddr->cmd_addr + (ATA_REG_LBAM << shift); + ioaddr->lbah_addr = ioaddr->cmd_addr + (ATA_REG_LBAH << shift); + ioaddr->device_addr = ioaddr->cmd_addr + (ATA_REG_DEVICE << shift); + ioaddr->status_addr = ioaddr->cmd_addr + (ATA_REG_STATUS << shift); + ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << shift); +} + +/** + * __pata_platform_probe - attach a platform interface + * @dev: device + * @io_res: Resource representing I/O base + * @ctl_res: Resource representing CTL base + * @irq_res: Resource representing IRQ and its flags + * @ioport_shift: I/O port shift + * @__pio_mask: PIO mask + * @sht: scsi_host_template to use when registering + * + * Register a platform bus IDE interface. Such interfaces are PIO and we + * assume do not support IRQ sharing. + * + * Platform devices are expected to contain at least 2 resources per port: + * + * - I/O Base (IORESOURCE_IO or IORESOURCE_MEM) + * - CTL Base (IORESOURCE_IO or IORESOURCE_MEM) + * + * and optionally: + * + * - IRQ (IORESOURCE_IRQ) + * + * If the base resources are both mem types, the ioremap() is handled + * here. For IORESOURCE_IO, it's assumed that there's no remapping + * necessary. + * + * If no IRQ resource is present, PIO polling mode is used instead. + */ +int __pata_platform_probe(struct device *dev, struct resource *io_res, + struct resource *ctl_res, struct resource *irq_res, + unsigned int ioport_shift, int __pio_mask, + struct scsi_host_template *sht) +{ + struct ata_host *host; + struct ata_port *ap; + unsigned int mmio; + int irq = 0; + int irq_flags = 0; + + /* + * Check for MMIO + */ + mmio = (( io_res->flags == IORESOURCE_MEM) && + (ctl_res->flags == IORESOURCE_MEM)); + + /* + * And the IRQ + */ + if (irq_res && irq_res->start > 0) { + irq = irq_res->start; + irq_flags = irq_res->flags & IRQF_TRIGGER_MASK; + } + + /* + * Now that that's out of the way, wire up the port.. + */ + host = ata_host_alloc(dev, 1); + if (!host) + return -ENOMEM; + ap = host->ports[0]; + + ap->ops = &pata_platform_port_ops; + ap->pio_mask = __pio_mask; + ap->flags |= ATA_FLAG_SLAVE_POSS; + + /* + * Use polling mode if there's no IRQ + */ + if (!irq) { + ap->flags |= ATA_FLAG_PIO_POLLING; + ata_port_desc(ap, "no IRQ, using PIO polling"); + } + + /* + * Handle the MMIO case + */ + if (mmio) { + ap->ioaddr.cmd_addr = devm_ioremap(dev, io_res->start, + resource_size(io_res)); + ap->ioaddr.ctl_addr = devm_ioremap(dev, ctl_res->start, + resource_size(ctl_res)); + } else { + ap->ioaddr.cmd_addr = devm_ioport_map(dev, io_res->start, + resource_size(io_res)); + ap->ioaddr.ctl_addr = devm_ioport_map(dev, ctl_res->start, + resource_size(ctl_res)); + } + if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) { + dev_err(dev, "failed to map IO/CTL base\n"); + return -ENOMEM; + } + + ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; + + pata_platform_setup_port(&ap->ioaddr, ioport_shift); + + ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport", + (unsigned long long)io_res->start, + (unsigned long long)ctl_res->start); + + /* activate */ + return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL, + irq_flags, sht); +} +EXPORT_SYMBOL_GPL(__pata_platform_probe); + +static int pata_platform_probe(struct platform_device *pdev) +{ + struct resource *io_res; + struct resource *ctl_res; + struct resource *irq_res; + struct pata_platform_info *pp_info = dev_get_platdata(&pdev->dev); + + /* + * Simple resource validation .. + */ + if ((pdev->num_resources != 3) && (pdev->num_resources != 2)) { + dev_err(&pdev->dev, "invalid number of resources\n"); + return -EINVAL; + } + + /* + * Get the I/O base first + */ + io_res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (io_res == NULL) { + io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(io_res == NULL)) + return -EINVAL; + } + + /* + * Then the CTL base + */ + ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 1); + if (ctl_res == NULL) { + ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (unlikely(ctl_res == NULL)) + return -EINVAL; + } + + /* + * And the IRQ + */ + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + + return __pata_platform_probe(&pdev->dev, io_res, ctl_res, irq_res, + pp_info ? pp_info->ioport_shift : 0, + pio_mask, &pata_platform_sht); +} + +static struct platform_driver pata_platform_driver = { + .probe = pata_platform_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = DRV_NAME, + }, +}; + +module_platform_driver(pata_platform_driver); + +module_param(pio_mask, int, 0); + +MODULE_AUTHOR("Paul Mundt"); +MODULE_DESCRIPTION("low-level driver for platform device ATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c new file mode 100644 index 000000000..c36b3e653 --- /dev/null +++ b/drivers/ata/pata_pxa.c @@ -0,0 +1,397 @@ +/* + * Generic PXA PATA driver + * + * Copyright (C) 2010 Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#define DRV_NAME "pata_pxa" +#define DRV_VERSION "0.1" + +struct pata_pxa_data { + uint32_t dma_channel; + struct pxa_dma_desc *dma_desc; + dma_addr_t dma_desc_addr; + uint32_t dma_desc_id; + + /* DMA IO physical address */ + uint32_t dma_io_addr; + /* PXA DREQ<0:2> pin selector */ + uint32_t dma_dreq; + /* DMA DCSR register value */ + uint32_t dma_dcsr; + + struct completion dma_done; +}; + +/* + * Setup the DMA descriptors. The size is transfer capped at 4k per descriptor, + * if the transfer is longer, it is split into multiple chained descriptors. + */ +static void pxa_load_dmac(struct scatterlist *sg, struct ata_queued_cmd *qc) +{ + struct pata_pxa_data *pd = qc->ap->private_data; + + uint32_t cpu_len, seg_len; + dma_addr_t cpu_addr; + + cpu_addr = sg_dma_address(sg); + cpu_len = sg_dma_len(sg); + + do { + seg_len = (cpu_len > 0x1000) ? 0x1000 : cpu_len; + + pd->dma_desc[pd->dma_desc_id].ddadr = pd->dma_desc_addr + + ((pd->dma_desc_id + 1) * sizeof(struct pxa_dma_desc)); + + pd->dma_desc[pd->dma_desc_id].dcmd = DCMD_BURST32 | + DCMD_WIDTH2 | (DCMD_LENGTH & seg_len); + + if (qc->tf.flags & ATA_TFLAG_WRITE) { + pd->dma_desc[pd->dma_desc_id].dsadr = cpu_addr; + pd->dma_desc[pd->dma_desc_id].dtadr = pd->dma_io_addr; + pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCSRCADDR | + DCMD_FLOWTRG; + } else { + pd->dma_desc[pd->dma_desc_id].dsadr = pd->dma_io_addr; + pd->dma_desc[pd->dma_desc_id].dtadr = cpu_addr; + pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCTRGADDR | + DCMD_FLOWSRC; + } + + cpu_len -= seg_len; + cpu_addr += seg_len; + pd->dma_desc_id++; + + } while (cpu_len); + + /* Should not happen */ + if (seg_len & 0x1f) + DALGN |= (1 << pd->dma_dreq); +} + +/* + * Prepare taskfile for submission. + */ +static void pxa_qc_prep(struct ata_queued_cmd *qc) +{ + struct pata_pxa_data *pd = qc->ap->private_data; + int si = 0; + struct scatterlist *sg; + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + pd->dma_desc_id = 0; + + DCSR(pd->dma_channel) = 0; + DALGN &= ~(1 << pd->dma_dreq); + + for_each_sg(qc->sg, sg, qc->n_elem, si) + pxa_load_dmac(sg, qc); + + pd->dma_desc[pd->dma_desc_id - 1].ddadr = DDADR_STOP; + + /* Fire IRQ only at the end of last block */ + pd->dma_desc[pd->dma_desc_id - 1].dcmd |= DCMD_ENDIRQEN; + + DDADR(pd->dma_channel) = pd->dma_desc_addr; + DRCMR(pd->dma_dreq) = DRCMR_MAPVLD | pd->dma_channel; + +} + +/* + * Configure the DMA controller, load the DMA descriptors, but don't start the + * DMA controller yet. Only issue the ATA command. + */ +static void pxa_bmdma_setup(struct ata_queued_cmd *qc) +{ + qc->ap->ops->sff_exec_command(qc->ap, &qc->tf); +} + +/* + * Execute the DMA transfer. + */ +static void pxa_bmdma_start(struct ata_queued_cmd *qc) +{ + struct pata_pxa_data *pd = qc->ap->private_data; + init_completion(&pd->dma_done); + DCSR(pd->dma_channel) = DCSR_RUN; +} + +/* + * Wait until the DMA transfer completes, then stop the DMA controller. + */ +static void pxa_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct pata_pxa_data *pd = qc->ap->private_data; + + if ((DCSR(pd->dma_channel) & DCSR_RUN) && + wait_for_completion_timeout(&pd->dma_done, HZ)) + dev_err(qc->ap->dev, "Timeout waiting for DMA completion!"); + + DCSR(pd->dma_channel) = 0; +} + +/* + * Read DMA status. The bmdma_stop() will take care of properly finishing the + * DMA transfer so we always have DMA-complete interrupt here. + */ +static unsigned char pxa_bmdma_status(struct ata_port *ap) +{ + struct pata_pxa_data *pd = ap->private_data; + unsigned char ret = ATA_DMA_INTR; + + if (pd->dma_dcsr & DCSR_BUSERR) + ret |= ATA_DMA_ERR; + + return ret; +} + +/* + * No IRQ register present so we do nothing. + */ +static void pxa_irq_clear(struct ata_port *ap) +{ +} + +/* + * Check for ATAPI DMA. ATAPI DMA is unsupported by this driver. It's still + * unclear why ATAPI has DMA issues. + */ +static int pxa_check_atapi_dma(struct ata_queued_cmd *qc) +{ + return -EOPNOTSUPP; +} + +static struct scsi_host_template pxa_ata_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations pxa_ata_port_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = ata_cable_40wire, + + .bmdma_setup = pxa_bmdma_setup, + .bmdma_start = pxa_bmdma_start, + .bmdma_stop = pxa_bmdma_stop, + .bmdma_status = pxa_bmdma_status, + + .check_atapi_dma = pxa_check_atapi_dma, + + .sff_irq_clear = pxa_irq_clear, + + .qc_prep = pxa_qc_prep, +}; + +/* + * DMA interrupt handler. + */ +static void pxa_ata_dma_irq(int dma, void *port) +{ + struct ata_port *ap = port; + struct pata_pxa_data *pd = ap->private_data; + + pd->dma_dcsr = DCSR(dma); + DCSR(dma) = pd->dma_dcsr; + + if (pd->dma_dcsr & DCSR_STOPSTATE) + complete(&pd->dma_done); +} + +static int pxa_ata_probe(struct platform_device *pdev) +{ + struct ata_host *host; + struct ata_port *ap; + struct pata_pxa_data *data; + struct resource *cmd_res; + struct resource *ctl_res; + struct resource *dma_res; + struct resource *irq_res; + struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev); + int ret = 0; + + /* + * Resource validation, three resources are needed: + * - CMD port base address + * - CTL port base address + * - DMA port base address + * - IRQ pin + */ + if (pdev->num_resources != 4) { + dev_err(&pdev->dev, "invalid number of resources\n"); + return -EINVAL; + } + + /* + * CMD port base address + */ + cmd_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(cmd_res == NULL)) + return -EINVAL; + + /* + * CTL port base address + */ + ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (unlikely(ctl_res == NULL)) + return -EINVAL; + + /* + * DMA port base address + */ + dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (unlikely(dma_res == NULL)) + return -EINVAL; + + /* + * IRQ pin + */ + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (unlikely(irq_res == NULL)) + return -EINVAL; + + /* + * Allocate the host + */ + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + return -ENOMEM; + + ap = host->ports[0]; + ap->ops = &pxa_ata_port_ops; + ap->pio_mask = ATA_PIO4; + ap->mwdma_mask = ATA_MWDMA2; + + ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, cmd_res->start, + resource_size(cmd_res)); + ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start, + resource_size(ctl_res)); + ap->ioaddr.bmdma_addr = devm_ioremap(&pdev->dev, dma_res->start, + resource_size(dma_res)); + + /* + * Adjust register offsets + */ + ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; + ap->ioaddr.data_addr = ap->ioaddr.cmd_addr + + (ATA_REG_DATA << pdata->reg_shift); + ap->ioaddr.error_addr = ap->ioaddr.cmd_addr + + (ATA_REG_ERR << pdata->reg_shift); + ap->ioaddr.feature_addr = ap->ioaddr.cmd_addr + + (ATA_REG_FEATURE << pdata->reg_shift); + ap->ioaddr.nsect_addr = ap->ioaddr.cmd_addr + + (ATA_REG_NSECT << pdata->reg_shift); + ap->ioaddr.lbal_addr = ap->ioaddr.cmd_addr + + (ATA_REG_LBAL << pdata->reg_shift); + ap->ioaddr.lbam_addr = ap->ioaddr.cmd_addr + + (ATA_REG_LBAM << pdata->reg_shift); + ap->ioaddr.lbah_addr = ap->ioaddr.cmd_addr + + (ATA_REG_LBAH << pdata->reg_shift); + ap->ioaddr.device_addr = ap->ioaddr.cmd_addr + + (ATA_REG_DEVICE << pdata->reg_shift); + ap->ioaddr.status_addr = ap->ioaddr.cmd_addr + + (ATA_REG_STATUS << pdata->reg_shift); + ap->ioaddr.command_addr = ap->ioaddr.cmd_addr + + (ATA_REG_CMD << pdata->reg_shift); + + /* + * Allocate and load driver's internal data structure + */ + data = devm_kzalloc(&pdev->dev, sizeof(struct pata_pxa_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + ap->private_data = data; + data->dma_dreq = pdata->dma_dreq; + data->dma_io_addr = dma_res->start; + + /* + * Allocate space for the DMA descriptors + */ + data->dma_desc = dmam_alloc_coherent(&pdev->dev, PAGE_SIZE, + &data->dma_desc_addr, GFP_KERNEL); + if (!data->dma_desc) + return -EINVAL; + + /* + * Request the DMA channel + */ + data->dma_channel = pxa_request_dma(DRV_NAME, DMA_PRIO_LOW, + pxa_ata_dma_irq, ap); + if (data->dma_channel < 0) + return -EBUSY; + + /* + * Stop and clear the DMA channel + */ + DCSR(data->dma_channel) = 0; + + /* + * Activate the ATA host + */ + ret = ata_host_activate(host, irq_res->start, ata_sff_interrupt, + pdata->irq_flags, &pxa_ata_sht); + if (ret) + pxa_free_dma(data->dma_channel); + + return ret; +} + +static int pxa_ata_remove(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + struct pata_pxa_data *data = host->ports[0]->private_data; + + pxa_free_dma(data->dma_channel); + + ata_host_detach(host); + + return 0; +} + +static struct platform_driver pxa_ata_driver = { + .probe = pxa_ata_probe, + .remove = pxa_ata_remove, + .driver = { + .name = DRV_NAME, + }, +}; + +module_platform_driver(pxa_ata_driver); + +MODULE_AUTHOR("Marek Vasut "); +MODULE_DESCRIPTION("DMA-capable driver for PATA on PXA CPU"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c new file mode 100644 index 000000000..a3f1123d1 --- /dev/null +++ b/drivers/ata/pata_radisys.c @@ -0,0 +1,252 @@ +/* + * pata_radisys.c - Intel PATA/SATA controllers + * + * (C) 2006 Red Hat + * + * Some parts based on ata_piix.c by Jeff Garzik and others. + * + * A PIIX relative, this device has a single ATA channel and no + * slave timings, SITRE or PPE. In that sense it is a close relative + * of the original PIIX. It does however support UDMA 33/66 per channel + * although no other modes/timings. Also lacking is 32bit I/O on the ATA + * port. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_radisys" +#define DRV_VERSION "0.4.4" + +/** + * radisys_set_piomode - Initialize host controller PATA PIO timings + * @ap: ATA port + * @adev: Device whose timings we are configuring + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void radisys_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u16 idetm_data; + int control = 0; + + /* + * See Intel Document 298600-004 for the timing programing rules + * for PIIX/ICH. Note that the early PIIX does not have the slave + * timing port at 0x44. The Radisys is a relative of the PIIX + * but not the same so be careful. + */ + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, /* Check me */ + { 0, 0 }, + { 1, 1 }, + { 2, 2 }, + { 3, 3 }, }; + + if (pio > 0) + control |= 1; /* TIME1 enable */ + if (ata_pio_need_iordy(adev)) + control |= 2; /* IE IORDY */ + + pci_read_config_word(dev, 0x40, &idetm_data); + + /* Enable IE and TIME as appropriate. Clear the other + drive timing bits */ + idetm_data &= 0xCCCC; + idetm_data |= (control << (4 * adev->devno)); + idetm_data |= (timings[pio][0] << 12) | + (timings[pio][1] << 8); + pci_write_config_word(dev, 0x40, idetm_data); + + /* Track which port is configured */ + ap->private_data = adev; +} + +/** + * radisys_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set MWDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u16 idetm_data; + u8 udma_enable; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 1 }, + { 2, 2 }, + { 3, 3 }, }; + + /* + * MWDMA is driven by the PIO timings. We must also enable + * IORDY unconditionally. + */ + + pci_read_config_word(dev, 0x40, &idetm_data); + pci_read_config_byte(dev, 0x48, &udma_enable); + + if (adev->dma_mode < XFER_UDMA_0) { + unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; + const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + int control = 3; /* IORDY|TIME0 */ + + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO0 for PIO cycles. */ + + if (adev->pio_mode < needed_pio[mwdma]) + control = 1; + + /* Mask out the relevant control and timing bits we will load. Also + clear the other drive TIME register as a precaution */ + + idetm_data &= 0xCCCC; + idetm_data |= control << (4 * adev->devno); + idetm_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); + + udma_enable &= ~(1 << adev->devno); + } else { + u8 udma_mode; + + /* UDMA66 on: UDMA 33 and 66 are switchable via register 0x4A */ + + pci_read_config_byte(dev, 0x4A, &udma_mode); + + if (adev->xfer_mode == XFER_UDMA_2) + udma_mode &= ~(2 << (adev->devno * 4)); + else /* UDMA 4 */ + udma_mode |= (2 << (adev->devno * 4)); + + pci_write_config_byte(dev, 0x4A, udma_mode); + + udma_enable |= (1 << adev->devno); + } + pci_write_config_word(dev, 0x40, idetm_data); + pci_write_config_byte(dev, 0x48, udma_enable); + + /* Track which port is configured */ + ap->private_data = adev; +} + +/** + * radisys_qc_issue - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * necessary. Our logic also clears TIME0/TIME1 for the other device so + * that, even if we get this wrong, cycles to the other device will + * be made PIO0. + */ + +static unsigned int radisys_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + if (adev != ap->private_data) { + /* UDMA timing is not shared */ + if (adev->dma_mode < XFER_UDMA_0) { + if (adev->dma_mode) + radisys_set_dmamode(ap, adev); + else if (adev->pio_mode) + radisys_set_piomode(ap, adev); + } + } + return ata_bmdma_qc_issue(qc); +} + + +static struct scsi_host_template radisys_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations radisys_pata_ops = { + .inherits = &ata_bmdma_port_ops, + .qc_issue = radisys_qc_issue, + .cable_detect = ata_cable_unknown, + .set_piomode = radisys_set_piomode, + .set_dmamode = radisys_set_dmamode, +}; + + +/** + * radisys_init_one - Register PIIX ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in radisys_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .udma_mask = ATA_UDMA24_ONLY, + .port_ops = &radisys_pata_ops, + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + return ata_pci_bmdma_init_one(pdev, ppi, &radisys_sht, NULL, 0); +} + +static const struct pci_device_id radisys_pci_tbl[] = { + { PCI_VDEVICE(RADISYS, 0x8201), }, + + { } /* terminate list */ +}; + +static struct pci_driver radisys_pci_driver = { + .name = DRV_NAME, + .id_table = radisys_pci_tbl, + .probe = radisys_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(radisys_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for Radisys R82600 controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, radisys_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c new file mode 100644 index 000000000..6d08446b8 --- /dev/null +++ b/drivers/ata/pata_rb532_cf.c @@ -0,0 +1,208 @@ +/* + * A low-level PATA driver to handle a Compact Flash connected on the + * Mikrotik's RouterBoard 532 board. + * + * Copyright (C) 2007 Gabor Juhos + * Copyright (C) 2008 Florian Fainelli + * + * This file was based on: drivers/ata/pata_ixp4xx_cf.c + * Copyright (C) 2006-07 Tower Technologies + * Author: Alessandro Zummo + * + * Also was based on the driver for Linux 2.4.xx published by Mikrotik for + * their RouterBoard 1xx and 5xx series devices. The original Mikrotik code + * seems not to have a license. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include + +#define DRV_NAME "pata-rb532-cf" +#define DRV_VERSION "0.1.0" +#define DRV_DESC "PATA driver for RouterBOARD 532 Compact Flash" + +#define RB500_CF_MAXPORTS 1 +#define RB500_CF_IO_DELAY 400 + +#define RB500_CF_REG_BASE 0x0800 +#define RB500_CF_REG_ERR 0x080D +#define RB500_CF_REG_CTRL 0x080E +/* 32bit buffered data register offset */ +#define RB500_CF_REG_DBUF32 0x0C00 + +struct rb532_cf_info { + void __iomem *iobase; + unsigned int gpio_line; + unsigned int irq; +}; + +/* ------------------------------------------------------------------------ */ + +static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance) +{ + struct ata_host *ah = dev_instance; + struct rb532_cf_info *info = ah->private_data; + + if (gpio_get_value(info->gpio_line)) { + irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW); + ata_sff_interrupt(info->irq, dev_instance); + } else { + irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); + } + + return IRQ_HANDLED; +} + +static struct ata_port_operations rb532_pata_port_ops = { + .inherits = &ata_sff_port_ops, + .sff_data_xfer = ata_sff_data_xfer32, +}; + +/* ------------------------------------------------------------------------ */ + +static struct scsi_host_template rb532_pata_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +/* ------------------------------------------------------------------------ */ + +static void rb532_pata_setup_ports(struct ata_host *ah) +{ + struct rb532_cf_info *info = ah->private_data; + struct ata_port *ap; + + ap = ah->ports[0]; + + ap->ops = &rb532_pata_port_ops; + ap->pio_mask = ATA_PIO4; + + ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE; + ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL; + ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL; + + ata_sff_std_ports(&ap->ioaddr); + + ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DBUF32; + ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR; +} + +static int rb532_pata_driver_probe(struct platform_device *pdev) +{ + int irq; + int gpio; + struct resource *res; + struct ata_host *ah; + struct rb532_cf_info *info; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no IOMEM resource found\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(&pdev->dev, "no IRQ resource found\n"); + return -ENOENT; + } + + gpio = irq_to_gpio(irq); + if (gpio < 0) { + dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq); + return -ENOENT; + } + + ret = gpio_request(gpio, DRV_NAME); + if (ret) { + dev_err(&pdev->dev, "GPIO request failed\n"); + return ret; + } + + /* allocate host */ + ah = ata_host_alloc(&pdev->dev, RB500_CF_MAXPORTS); + if (!ah) + return -ENOMEM; + + platform_set_drvdata(pdev, ah); + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + ah->private_data = info; + info->gpio_line = gpio; + info->irq = irq; + + info->iobase = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!info->iobase) + return -ENOMEM; + + ret = gpio_direction_input(gpio); + if (ret) { + dev_err(&pdev->dev, "unable to set GPIO direction, err=%d\n", + ret); + goto err_free_gpio; + } + + rb532_pata_setup_ports(ah); + + ret = ata_host_activate(ah, irq, rb532_pata_irq_handler, + IRQF_TRIGGER_LOW, &rb532_pata_sht); + if (ret) + goto err_free_gpio; + + return 0; + +err_free_gpio: + gpio_free(gpio); + + return ret; +} + +static int rb532_pata_driver_remove(struct platform_device *pdev) +{ + struct ata_host *ah = platform_get_drvdata(pdev); + struct rb532_cf_info *info = ah->private_data; + + ata_host_detach(ah); + gpio_free(info->gpio_line); + + return 0; +} + +static struct platform_driver rb532_pata_platform_driver = { + .probe = rb532_pata_driver_probe, + .remove = rb532_pata_driver_remove, + .driver = { + .name = DRV_NAME, + }, +}; + +#define DRV_INFO DRV_DESC " version " DRV_VERSION + +module_platform_driver(rb532_pata_platform_driver); + +MODULE_AUTHOR("Gabor Juhos "); +MODULE_AUTHOR("Florian Fainelli "); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c new file mode 100644 index 000000000..9ce595221 --- /dev/null +++ b/drivers/ata/pata_rdc.c @@ -0,0 +1,398 @@ +/* + * pata_rdc - Driver for later RDC PATA controllers + * + * This is actually a driver for hardware meeting + * INCITS 370-2004 (1510D): ATA Host Adapter Standards + * + * Based on ata_piix. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_rdc" +#define DRV_VERSION "0.01" + +struct rdc_host_priv { + u32 saved_iocfg; +}; + +/** + * rdc_pata_cable_detect - Probe host controller cable detect info + * @ap: Port for which cable detect info is desired + * + * Read 80c cable indicator from ATA PCI device's PCI config + * register. This register is normally set by firmware (BIOS). + * + * LOCKING: + * None (inherited from caller). + */ + +static int rdc_pata_cable_detect(struct ata_port *ap) +{ + struct rdc_host_priv *hpriv = ap->host->private_data; + u8 mask; + + /* check BIOS cable detect results */ + mask = 0x30 << (2 * ap->port_no); + if ((hpriv->saved_iocfg & mask) == 0) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + +/** + * rdc_pata_prereset - prereset for PATA host controller + * @link: Target link + * @deadline: deadline jiffies for the operation + * + * LOCKING: + * None (inherited from caller). + */ +static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + static const struct pci_bits rdc_enable_bits[] = { + { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ + { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ + }; + + if (!pci_test_config_bits(pdev, &rdc_enable_bits[ap->port_no])) + return -ENOENT; + return ata_sff_prereset(link, deadline); +} + +static DEFINE_SPINLOCK(rdc_lock); + +/** + * rdc_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned long flags; + unsigned int is_slave = (adev->devno != 0); + unsigned int master_port= ap->port_no ? 0x42 : 0x40; + unsigned int slave_port = 0x44; + u16 master_data; + u8 slave_data; + u8 udma_enable; + int control = 0; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + if (pio >= 2) + control |= 1; /* TIME1 enable */ + if (ata_pio_need_iordy(adev)) + control |= 2; /* IE enable */ + + if (adev->class == ATA_DEV_ATA) + control |= 4; /* PPE enable */ + + spin_lock_irqsave(&rdc_lock, flags); + + /* PIO configuration clears DTE unconditionally. It will be + * programmed in set_dmamode which is guaranteed to be called + * after set_piomode if any DMA mode is available. + */ + pci_read_config_word(dev, master_port, &master_data); + if (is_slave) { + /* clear TIME1|IE1|PPE1|DTE1 */ + master_data &= 0xff0f; + /* Enable SITRE (separate slave timing register) */ + master_data |= 0x4000; + /* enable PPE1, IE1 and TIME1 as needed */ + master_data |= (control << 4); + pci_read_config_byte(dev, slave_port, &slave_data); + slave_data &= (ap->port_no ? 0x0f : 0xf0); + /* Load the timing nibble for this slave */ + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) + << (ap->port_no ? 4 : 0); + } else { + /* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */ + master_data &= 0xccf0; + /* Enable PPE, IE and TIME as appropriate */ + master_data |= control; + /* load ISP and RCT */ + master_data |= + (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } + pci_write_config_word(dev, master_port, master_data); + if (is_slave) + pci_write_config_byte(dev, slave_port, slave_data); + + /* Ensure the UDMA bit is off - it will be turned back on if + UDMA is selected */ + + pci_read_config_byte(dev, 0x48, &udma_enable); + udma_enable &= ~(1 << (2 * ap->port_no + adev->devno)); + pci_write_config_byte(dev, 0x48, udma_enable); + + spin_unlock_irqrestore(&rdc_lock, flags); +} + +/** + * rdc_set_dmamode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Drive in question + * + * Set UDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned long flags; + u8 master_port = ap->port_no ? 0x42 : 0x40; + u16 master_data; + u8 speed = adev->dma_mode; + int devid = adev->devno + 2 * ap->port_no; + u8 udma_enable = 0; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + spin_lock_irqsave(&rdc_lock, flags); + + pci_read_config_word(dev, master_port, &master_data); + pci_read_config_byte(dev, 0x48, &udma_enable); + + if (speed >= XFER_UDMA_0) { + unsigned int udma = adev->dma_mode - XFER_UDMA_0; + u16 udma_timing; + u16 ideconf; + int u_clock, u_speed; + + /* + * UDMA is handled by a combination of clock switching and + * selection of dividers + * + * Handy rule: Odd modes are UDMATIMx 01, even are 02 + * except UDMA0 which is 00 + */ + u_speed = min(2 - (udma & 1), udma); + if (udma == 5) + u_clock = 0x1000; /* 100Mhz */ + else if (udma > 2) + u_clock = 1; /* 66Mhz */ + else + u_clock = 0; /* 33Mhz */ + + udma_enable |= (1 << devid); + + /* Load the CT/RP selection */ + pci_read_config_word(dev, 0x4A, &udma_timing); + udma_timing &= ~(3 << (4 * devid)); + udma_timing |= u_speed << (4 * devid); + pci_write_config_word(dev, 0x4A, udma_timing); + + /* Select a 33/66/100Mhz clock */ + pci_read_config_word(dev, 0x54, &ideconf); + ideconf &= ~(0x1001 << devid); + ideconf |= u_clock << devid; + pci_write_config_word(dev, 0x54, ideconf); + } else { + /* + * MWDMA is driven by the PIO timings. We must also enable + * IORDY unconditionally along with TIME1. PPE has already + * been set when the PIO timing was set. + */ + unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; + unsigned int control; + u8 slave_data; + const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + + control = 3; /* IORDY|TIME1 */ + + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO into PIO0 */ + + if (adev->pio_mode < needed_pio[mwdma]) + /* Enable DMA timing only */ + control |= 8; /* PIO cycles in PIO0 */ + + if (adev->devno) { /* Slave */ + master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */ + master_data |= control << 4; + pci_read_config_byte(dev, 0x44, &slave_data); + slave_data &= (ap->port_no ? 0x0f : 0xf0); + /* Load the matching timing */ + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); + pci_write_config_byte(dev, 0x44, slave_data); + } else { /* Master */ + master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY + and master timing bits */ + master_data |= control; + master_data |= + (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } + + udma_enable &= ~(1 << devid); + pci_write_config_word(dev, master_port, master_data); + } + pci_write_config_byte(dev, 0x48, udma_enable); + + spin_unlock_irqrestore(&rdc_lock, flags); +} + +static struct ata_port_operations rdc_pata_ops = { + .inherits = &ata_bmdma32_port_ops, + .cable_detect = rdc_pata_cable_detect, + .set_piomode = rdc_set_piomode, + .set_dmamode = rdc_set_dmamode, + .prereset = rdc_pata_prereset, +}; + +static struct ata_port_info rdc_port_info = { + + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .udma_mask = ATA_UDMA5, + .port_ops = &rdc_pata_ops, +}; + +static struct scsi_host_template rdc_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +/** + * rdc_init_one - Register PIIX ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in rdc_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int rdc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct device *dev = &pdev->dev; + struct ata_port_info port_info[2]; + const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] }; + struct ata_host *host; + struct rdc_host_priv *hpriv; + int rc; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + port_info[0] = rdc_port_info; + port_info[1] = rdc_port_info; + + /* enable device and prepare host */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + + /* Save IOCFG, this will be used for cable detection, quirk + * detection and restoration on detach. + */ + pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg); + + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); + if (rc) + return rc; + host->private_data = hpriv; + + pci_intx(pdev, 1); + + host->flags |= ATA_HOST_PARALLEL_SCAN; + + pci_set_master(pdev); + return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &rdc_sht); +} + +static void rdc_remove_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + struct rdc_host_priv *hpriv = host->private_data; + + pci_write_config_dword(pdev, 0x54, hpriv->saved_iocfg); + + ata_pci_remove_one(pdev); +} + +static const struct pci_device_id rdc_pci_tbl[] = { + { PCI_DEVICE(0x17F3, 0x1011), }, + { PCI_DEVICE(0x17F3, 0x1012), }, + { } /* terminate list */ +}; + +static struct pci_driver rdc_pci_driver = { + .name = DRV_NAME, + .id_table = rdc_pci_tbl, + .probe = rdc_init_one, + .remove = rdc_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + + +module_pci_driver(rdc_pci_driver); + +MODULE_AUTHOR("Alan Cox (based on ata_piix)"); +MODULE_DESCRIPTION("SCSI low-level driver for RDC PATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, rdc_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c new file mode 100644 index 000000000..b3ec18c6b --- /dev/null +++ b/drivers/ata/pata_rz1000.c @@ -0,0 +1,148 @@ +/* + * RZ1000/1001 driver based upon + * + * linux/drivers/ide/pci/rz1000.c Version 0.06 January 12, 2003 + * Copyright (C) 1995-1998 Linus Torvalds & author (see below) + * Principal Author: mlord@pobox.com (Mark Lord) + * + * See linux/MAINTAINERS for address of current maintainer. + * + * This file provides support for disabling the buggy read-ahead + * mode of the RZ1000 IDE chipset, commonly used on Intel motherboards. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_rz1000" +#define DRV_VERSION "0.2.4" + + +/** + * rz1000_set_mode - mode setting function + * @link: ATA link + * @unused: returned device on set_mode failure + * + * Use a non standard set_mode function. We don't want to be tuned. We + * would prefer to be BIOS generic but for the fact our hardware is + * whacked out. + */ + +static int rz1000_set_mode(struct ata_link *link, struct ata_device **unused) +{ + struct ata_device *dev; + + ata_for_each_dev(dev, link, ENABLED) { + /* We don't really care */ + dev->pio_mode = XFER_PIO_0; + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + ata_dev_info(dev, "configured for PIO\n"); + } + return 0; +} + + +static struct scsi_host_template rz1000_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations rz1000_port_ops = { + .inherits = &ata_sff_port_ops, + .cable_detect = ata_cable_40wire, + .set_mode = rz1000_set_mode, +}; + +static int rz1000_fifo_disable(struct pci_dev *pdev) +{ + u16 reg; + /* Be exceptionally paranoid as we must be sure to apply the fix */ + if (pci_read_config_word(pdev, 0x40, ®) != 0) + return -1; + reg &= 0xDFFF; + if (pci_write_config_word(pdev, 0x40, reg) != 0) + return -1; + printk(KERN_INFO DRV_NAME ": disabled chipset readahead.\n"); + return 0; +} + +/** + * rz1000_init_one - Register RZ1000 ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in rz1000_pci_tbl matching with @pdev + * + * Configure an RZ1000 interface. This doesn't require much special + * handling except that we *MUST* kill the chipset readahead or the + * user may experience data corruption. + */ + +static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .port_ops = &rz1000_port_ops + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + if (rz1000_fifo_disable(pdev) == 0) + return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL, 0); + + printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n"); + /* Not safe to use so skip */ + return -ENODEV; +} + +#ifdef CONFIG_PM_SLEEP +static int rz1000_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + /* If this fails on resume (which is a "can't happen" case), we + must stop as any progress risks data loss */ + if (rz1000_fifo_disable(pdev)) + panic("rz1000 fifo"); + + ata_host_resume(host); + return 0; +} +#endif + +static const struct pci_device_id pata_rz1000[] = { + { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), }, + { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), }, + + { }, +}; + +static struct pci_driver rz1000_pci_driver = { + .name = DRV_NAME, + .id_table = pata_rz1000, + .probe = rz1000_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = rz1000_reinit_one, +#endif +}; + +module_pci_driver(rz1000_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for RZ1000 PCI ATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, pata_rz1000); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c new file mode 100644 index 000000000..fa44eb287 --- /dev/null +++ b/drivers/ata/pata_samsung_cf.c @@ -0,0 +1,670 @@ +/* + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * PATA driver for Samsung SoCs. + * Supports CF Interface in True IDE mode. Currently only PIO mode has been + * implemented; UDMA support has to be added. + * + * Based on: + * PATA driver for AT91SAM9260 Static Memory Controller + * PATA driver for Toshiba SCC controller + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DRV_NAME "pata_samsung_cf" +#define DRV_VERSION "0.1" + +#define S3C_CFATA_REG(x) (x) +#define S3C_CFATA_MUX S3C_CFATA_REG(0x0) +#define S3C_ATA_CTRL S3C_CFATA_REG(0x0) +#define S3C_ATA_CMD S3C_CFATA_REG(0x8) +#define S3C_ATA_IRQ S3C_CFATA_REG(0x10) +#define S3C_ATA_IRQ_MSK S3C_CFATA_REG(0x14) +#define S3C_ATA_CFG S3C_CFATA_REG(0x18) + +#define S3C_ATA_PIO_TIME S3C_CFATA_REG(0x2c) +#define S3C_ATA_PIO_DTR S3C_CFATA_REG(0x54) +#define S3C_ATA_PIO_FED S3C_CFATA_REG(0x58) +#define S3C_ATA_PIO_SCR S3C_CFATA_REG(0x5c) +#define S3C_ATA_PIO_LLR S3C_CFATA_REG(0x60) +#define S3C_ATA_PIO_LMR S3C_CFATA_REG(0x64) +#define S3C_ATA_PIO_LHR S3C_CFATA_REG(0x68) +#define S3C_ATA_PIO_DVR S3C_CFATA_REG(0x6c) +#define S3C_ATA_PIO_CSD S3C_CFATA_REG(0x70) +#define S3C_ATA_PIO_DAD S3C_CFATA_REG(0x74) +#define S3C_ATA_PIO_RDATA S3C_CFATA_REG(0x7c) + +#define S3C_CFATA_MUX_TRUEIDE 0x01 +#define S3C_ATA_CFG_SWAP 0x40 +#define S3C_ATA_CFG_IORDYEN 0x02 + +enum s3c_cpu_type { + TYPE_S3C64XX, + TYPE_S5PV210, +}; + +/* + * struct s3c_ide_info - S3C PATA instance. + * @clk: The clock resource for this controller. + * @ide_addr: The area mapped for the hardware registers. + * @sfr_addr: The area mapped for the special function registers. + * @irq: The IRQ number we are using. + * @cpu_type: The exact type of this controller. + * @fifo_status_reg: The ATA_FIFO_STATUS register offset. + */ +struct s3c_ide_info { + struct clk *clk; + void __iomem *ide_addr; + void __iomem *sfr_addr; + unsigned int irq; + enum s3c_cpu_type cpu_type; + unsigned int fifo_status_reg; +}; + +static void pata_s3c_set_endian(void __iomem *s3c_ide_regbase, u8 mode) +{ + u32 reg = readl(s3c_ide_regbase + S3C_ATA_CFG); + reg = mode ? (reg & ~S3C_ATA_CFG_SWAP) : (reg | S3C_ATA_CFG_SWAP); + writel(reg, s3c_ide_regbase + S3C_ATA_CFG); +} + +static void pata_s3c_cfg_mode(void __iomem *s3c_ide_sfrbase) +{ + /* Select true-ide as the internal operating mode */ + writel(readl(s3c_ide_sfrbase + S3C_CFATA_MUX) | S3C_CFATA_MUX_TRUEIDE, + s3c_ide_sfrbase + S3C_CFATA_MUX); +} + +static unsigned long +pata_s3c_setup_timing(struct s3c_ide_info *info, const struct ata_timing *ata) +{ + int t1 = ata->setup; + int t2 = ata->act8b; + int t2i = ata->rec8b; + ulong piotime; + + piotime = ((t2i & 0xff) << 12) | ((t2 & 0xff) << 4) | (t1 & 0xf); + + return piotime; +} + +static void pata_s3c_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct s3c_ide_info *info = ap->host->private_data; + struct ata_timing timing; + int cycle_time; + ulong ata_cfg = readl(info->ide_addr + S3C_ATA_CFG); + ulong piotime; + + /* Enables IORDY if mode requires it */ + if (ata_pio_need_iordy(adev)) + ata_cfg |= S3C_ATA_CFG_IORDYEN; + else + ata_cfg &= ~S3C_ATA_CFG_IORDYEN; + + cycle_time = (int)(1000000000UL / clk_get_rate(info->clk)); + + ata_timing_compute(adev, adev->pio_mode, &timing, + cycle_time * 1000, 0); + + piotime = pata_s3c_setup_timing(info, &timing); + + writel(ata_cfg, info->ide_addr + S3C_ATA_CFG); + writel(piotime, info->ide_addr + S3C_ATA_PIO_TIME); +} + +/* + * Waits until the IDE controller is able to perform next read/write + * operation to the disk. Needed for 64XX series boards only. + */ +static int wait_for_host_ready(struct s3c_ide_info *info) +{ + ulong timeout; + void __iomem *fifo_reg = info->ide_addr + info->fifo_status_reg; + + /* wait for maximum of 20 msec */ + timeout = jiffies + msecs_to_jiffies(20); + while (time_before(jiffies, timeout)) { + if ((readl(fifo_reg) >> 28) == 0) + return 0; + } + return -EBUSY; +} + +/* + * Writes to one of the task file registers. + */ +static void ata_outb(struct ata_host *host, u8 addr, void __iomem *reg) +{ + struct s3c_ide_info *info = host->private_data; + + wait_for_host_ready(info); + writeb(addr, reg); +} + +/* + * Reads from one of the task file registers. + */ +static u8 ata_inb(struct ata_host *host, void __iomem *reg) +{ + struct s3c_ide_info *info = host->private_data; + u8 temp; + + wait_for_host_ready(info); + (void) readb(reg); + wait_for_host_ready(info); + temp = readb(info->ide_addr + S3C_ATA_PIO_RDATA); + return temp; +} + +/* + * pata_s3c_tf_load - send taskfile registers to host controller + */ +static void pata_s3c_tf_load(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + ata_outb(ap->host, tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + ata_outb(ap->host, tf->hob_feature, ioaddr->feature_addr); + ata_outb(ap->host, tf->hob_nsect, ioaddr->nsect_addr); + ata_outb(ap->host, tf->hob_lbal, ioaddr->lbal_addr); + ata_outb(ap->host, tf->hob_lbam, ioaddr->lbam_addr); + ata_outb(ap->host, tf->hob_lbah, ioaddr->lbah_addr); + } + + if (is_addr) { + ata_outb(ap->host, tf->feature, ioaddr->feature_addr); + ata_outb(ap->host, tf->nsect, ioaddr->nsect_addr); + ata_outb(ap->host, tf->lbal, ioaddr->lbal_addr); + ata_outb(ap->host, tf->lbam, ioaddr->lbam_addr); + ata_outb(ap->host, tf->lbah, ioaddr->lbah_addr); + } + + if (tf->flags & ATA_TFLAG_DEVICE) + ata_outb(ap->host, tf->device, ioaddr->device_addr); + + ata_wait_idle(ap); +} + +/* + * pata_s3c_tf_read - input device's ATA taskfile shadow registers + */ +static void pata_s3c_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->feature = ata_inb(ap->host, ioaddr->error_addr); + tf->nsect = ata_inb(ap->host, ioaddr->nsect_addr); + tf->lbal = ata_inb(ap->host, ioaddr->lbal_addr); + tf->lbam = ata_inb(ap->host, ioaddr->lbam_addr); + tf->lbah = ata_inb(ap->host, ioaddr->lbah_addr); + tf->device = ata_inb(ap->host, ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + ata_outb(ap->host, tf->ctl | ATA_HOB, ioaddr->ctl_addr); + tf->hob_feature = ata_inb(ap->host, ioaddr->error_addr); + tf->hob_nsect = ata_inb(ap->host, ioaddr->nsect_addr); + tf->hob_lbal = ata_inb(ap->host, ioaddr->lbal_addr); + tf->hob_lbam = ata_inb(ap->host, ioaddr->lbam_addr); + tf->hob_lbah = ata_inb(ap->host, ioaddr->lbah_addr); + ata_outb(ap->host, tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + } +} + +/* + * pata_s3c_exec_command - issue ATA command to host controller + */ +static void pata_s3c_exec_command(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + ata_outb(ap->host, tf->command, ap->ioaddr.command_addr); + ata_sff_pause(ap); +} + +/* + * pata_s3c_check_status - Read device status register + */ +static u8 pata_s3c_check_status(struct ata_port *ap) +{ + return ata_inb(ap->host, ap->ioaddr.status_addr); +} + +/* + * pata_s3c_check_altstatus - Read alternate device status register + */ +static u8 pata_s3c_check_altstatus(struct ata_port *ap) +{ + return ata_inb(ap->host, ap->ioaddr.altstatus_addr); +} + +/* + * pata_s3c_data_xfer - Transfer data by PIO + */ +static unsigned int pata_s3c_data_xfer(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) +{ + struct ata_port *ap = dev->link->ap; + struct s3c_ide_info *info = ap->host->private_data; + void __iomem *data_addr = ap->ioaddr.data_addr; + unsigned int words = buflen >> 1, i; + u16 *data_ptr = (u16 *)buf; + + /* Requires wait same as in ata_inb/ata_outb */ + if (rw == READ) + for (i = 0; i < words; i++, data_ptr++) { + wait_for_host_ready(info); + (void) readw(data_addr); + wait_for_host_ready(info); + *data_ptr = readw(info->ide_addr + + S3C_ATA_PIO_RDATA); + } + else + for (i = 0; i < words; i++, data_ptr++) { + wait_for_host_ready(info); + writew(*data_ptr, data_addr); + } + + if (buflen & 0x01) + dev_err(ap->dev, "unexpected trailing data\n"); + + return words << 1; +} + +/* + * pata_s3c_dev_select - Select device on ATA bus + */ +static void pata_s3c_dev_select(struct ata_port *ap, unsigned int device) +{ + u8 tmp = ATA_DEVICE_OBS; + + if (device != 0) + tmp |= ATA_DEV1; + + ata_outb(ap->host, tmp, ap->ioaddr.device_addr); + ata_sff_pause(ap); +} + +/* + * pata_s3c_devchk - PATA device presence detection + */ +static unsigned int pata_s3c_devchk(struct ata_port *ap, + unsigned int device) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u8 nsect, lbal; + + pata_s3c_dev_select(ap, device); + + ata_outb(ap->host, 0x55, ioaddr->nsect_addr); + ata_outb(ap->host, 0xaa, ioaddr->lbal_addr); + + ata_outb(ap->host, 0xaa, ioaddr->nsect_addr); + ata_outb(ap->host, 0x55, ioaddr->lbal_addr); + + ata_outb(ap->host, 0x55, ioaddr->nsect_addr); + ata_outb(ap->host, 0xaa, ioaddr->lbal_addr); + + nsect = ata_inb(ap->host, ioaddr->nsect_addr); + lbal = ata_inb(ap->host, ioaddr->lbal_addr); + + if ((nsect == 0x55) && (lbal == 0xaa)) + return 1; /* we found a device */ + + return 0; /* nothing found */ +} + +/* + * pata_s3c_wait_after_reset - wait for devices to become ready after reset + */ +static int pata_s3c_wait_after_reset(struct ata_link *link, + unsigned long deadline) +{ + int rc; + + ata_msleep(link->ap, ATA_WAIT_AFTER_RESET); + + /* always check readiness of the master device */ + rc = ata_sff_wait_ready(link, deadline); + /* -ENODEV means the odd clown forgot the D7 pulldown resistor + * and TF status is 0xff, bail out on it too. + */ + if (rc) + return rc; + + return 0; +} + +/* + * pata_s3c_bus_softreset - PATA device software reset + */ +static int pata_s3c_bus_softreset(struct ata_port *ap, + unsigned long deadline) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + /* software reset. causes dev0 to be selected */ + ata_outb(ap->host, ap->ctl, ioaddr->ctl_addr); + udelay(20); + ata_outb(ap->host, ap->ctl | ATA_SRST, ioaddr->ctl_addr); + udelay(20); + ata_outb(ap->host, ap->ctl, ioaddr->ctl_addr); + ap->last_ctl = ap->ctl; + + return pata_s3c_wait_after_reset(&ap->link, deadline); +} + +/* + * pata_s3c_softreset - reset host port via ATA SRST + */ +static int pata_s3c_softreset(struct ata_link *link, unsigned int *classes, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + unsigned int devmask = 0; + int rc; + u8 err; + + /* determine if device 0 is present */ + if (pata_s3c_devchk(ap, 0)) + devmask |= (1 << 0); + + /* select device 0 again */ + pata_s3c_dev_select(ap, 0); + + /* issue bus reset */ + rc = pata_s3c_bus_softreset(ap, deadline); + /* if link is occupied, -ENODEV too is an error */ + if (rc && rc != -ENODEV) { + ata_link_err(link, "SRST failed (errno=%d)\n", rc); + return rc; + } + + /* determine by signature whether we have ATA or ATAPI devices */ + classes[0] = ata_sff_dev_classify(&ap->link.device[0], + devmask & (1 << 0), &err); + + return 0; +} + +/* + * pata_s3c_set_devctl - Write device control register + */ +static void pata_s3c_set_devctl(struct ata_port *ap, u8 ctl) +{ + ata_outb(ap->host, ctl, ap->ioaddr.ctl_addr); +} + +static struct scsi_host_template pata_s3c_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations pata_s3c_port_ops = { + .inherits = &ata_sff_port_ops, + .sff_check_status = pata_s3c_check_status, + .sff_check_altstatus = pata_s3c_check_altstatus, + .sff_tf_load = pata_s3c_tf_load, + .sff_tf_read = pata_s3c_tf_read, + .sff_data_xfer = pata_s3c_data_xfer, + .sff_exec_command = pata_s3c_exec_command, + .sff_dev_select = pata_s3c_dev_select, + .sff_set_devctl = pata_s3c_set_devctl, + .softreset = pata_s3c_softreset, + .set_piomode = pata_s3c_set_piomode, +}; + +static struct ata_port_operations pata_s5p_port_ops = { + .inherits = &ata_sff_port_ops, + .set_piomode = pata_s3c_set_piomode, +}; + +static void pata_s3c_enable(void __iomem *s3c_ide_regbase, bool state) +{ + u32 temp = readl(s3c_ide_regbase + S3C_ATA_CTRL); + temp = state ? (temp | 1) : (temp & ~1); + writel(temp, s3c_ide_regbase + S3C_ATA_CTRL); +} + +static irqreturn_t pata_s3c_irq(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + struct s3c_ide_info *info = host->private_data; + u32 reg; + + reg = readl(info->ide_addr + S3C_ATA_IRQ); + writel(reg, info->ide_addr + S3C_ATA_IRQ); + + return ata_sff_interrupt(irq, dev_instance); +} + +static void pata_s3c_hwinit(struct s3c_ide_info *info, + struct s3c_ide_platdata *pdata) +{ + switch (info->cpu_type) { + case TYPE_S3C64XX: + /* Configure as big endian */ + pata_s3c_cfg_mode(info->sfr_addr); + pata_s3c_set_endian(info->ide_addr, 1); + pata_s3c_enable(info->ide_addr, true); + msleep(100); + + /* Remove IRQ Status */ + writel(0x1f, info->ide_addr + S3C_ATA_IRQ); + writel(0x1b, info->ide_addr + S3C_ATA_IRQ_MSK); + break; + + case TYPE_S5PV210: + /* Configure as little endian */ + pata_s3c_set_endian(info->ide_addr, 0); + pata_s3c_enable(info->ide_addr, true); + msleep(100); + + /* Remove IRQ Status */ + writel(0x3f, info->ide_addr + S3C_ATA_IRQ); + writel(0x3f, info->ide_addr + S3C_ATA_IRQ_MSK); + break; + + default: + BUG(); + } +} + +static int __init pata_s3c_probe(struct platform_device *pdev) +{ + struct s3c_ide_platdata *pdata = dev_get_platdata(&pdev->dev); + struct device *dev = &pdev->dev; + struct s3c_ide_info *info; + struct resource *res; + struct ata_port *ap; + struct ata_host *host; + enum s3c_cpu_type cpu_type; + int ret; + + cpu_type = platform_get_device_id(pdev)->driver_data; + + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + if (!info) { + dev_err(dev, "failed to allocate memory for device data\n"); + return -ENOMEM; + } + + info->irq = platform_get_irq(pdev, 0); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + info->ide_addr = devm_ioremap_resource(dev, res); + if (IS_ERR(info->ide_addr)) + return PTR_ERR(info->ide_addr); + + info->clk = devm_clk_get(&pdev->dev, "cfcon"); + if (IS_ERR(info->clk)) { + dev_err(dev, "failed to get access to cf controller clock\n"); + ret = PTR_ERR(info->clk); + info->clk = NULL; + return ret; + } + + clk_enable(info->clk); + + /* init ata host */ + host = ata_host_alloc(dev, 1); + if (!host) { + dev_err(dev, "failed to allocate ide host\n"); + ret = -ENOMEM; + goto stop_clk; + } + + ap = host->ports[0]; + ap->pio_mask = ATA_PIO4; + + if (cpu_type == TYPE_S3C64XX) { + ap->ops = &pata_s3c_port_ops; + info->sfr_addr = info->ide_addr + 0x1800; + info->ide_addr += 0x1900; + info->fifo_status_reg = 0x94; + } else { + ap->ops = &pata_s5p_port_ops; + info->fifo_status_reg = 0x84; + } + + info->cpu_type = cpu_type; + + if (info->irq <= 0) { + ap->flags |= ATA_FLAG_PIO_POLLING; + info->irq = 0; + ata_port_desc(ap, "no IRQ, using PIO polling\n"); + } + + ap->ioaddr.cmd_addr = info->ide_addr + S3C_ATA_CMD; + ap->ioaddr.data_addr = info->ide_addr + S3C_ATA_PIO_DTR; + ap->ioaddr.error_addr = info->ide_addr + S3C_ATA_PIO_FED; + ap->ioaddr.feature_addr = info->ide_addr + S3C_ATA_PIO_FED; + ap->ioaddr.nsect_addr = info->ide_addr + S3C_ATA_PIO_SCR; + ap->ioaddr.lbal_addr = info->ide_addr + S3C_ATA_PIO_LLR; + ap->ioaddr.lbam_addr = info->ide_addr + S3C_ATA_PIO_LMR; + ap->ioaddr.lbah_addr = info->ide_addr + S3C_ATA_PIO_LHR; + ap->ioaddr.device_addr = info->ide_addr + S3C_ATA_PIO_DVR; + ap->ioaddr.status_addr = info->ide_addr + S3C_ATA_PIO_CSD; + ap->ioaddr.command_addr = info->ide_addr + S3C_ATA_PIO_CSD; + ap->ioaddr.altstatus_addr = info->ide_addr + S3C_ATA_PIO_DAD; + ap->ioaddr.ctl_addr = info->ide_addr + S3C_ATA_PIO_DAD; + + ata_port_desc(ap, "mmio cmd 0x%llx ", + (unsigned long long)res->start); + + host->private_data = info; + + if (pdata && pdata->setup_gpio) + pdata->setup_gpio(); + + /* Set endianness and enable the interface */ + pata_s3c_hwinit(info, pdata); + + platform_set_drvdata(pdev, host); + + ret = ata_host_activate(host, info->irq, + info->irq ? pata_s3c_irq : NULL, + 0, &pata_s3c_sht); + if (ret) + goto stop_clk; + + return 0; + +stop_clk: + clk_disable(info->clk); + return ret; +} + +static int __exit pata_s3c_remove(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + struct s3c_ide_info *info = host->private_data; + + ata_host_detach(host); + + clk_disable(info->clk); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int pata_s3c_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ata_host *host = platform_get_drvdata(pdev); + + return ata_host_suspend(host, PMSG_SUSPEND); +} + +static int pata_s3c_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ata_host *host = platform_get_drvdata(pdev); + struct s3c_ide_platdata *pdata = dev_get_platdata(&pdev->dev); + struct s3c_ide_info *info = host->private_data; + + pata_s3c_hwinit(info, pdata); + ata_host_resume(host); + + return 0; +} + +static const struct dev_pm_ops pata_s3c_pm_ops = { + .suspend = pata_s3c_suspend, + .resume = pata_s3c_resume, +}; +#endif + +/* driver device registration */ +static struct platform_device_id pata_s3c_driver_ids[] = { + { + .name = "s3c64xx-pata", + .driver_data = TYPE_S3C64XX, + }, { + .name = "s5pv210-pata", + .driver_data = TYPE_S5PV210, + }, + { } +}; + +MODULE_DEVICE_TABLE(platform, pata_s3c_driver_ids); + +static struct platform_driver pata_s3c_driver = { + .remove = __exit_p(pata_s3c_remove), + .id_table = pata_s3c_driver_ids, + .driver = { + .name = DRV_NAME, +#ifdef CONFIG_PM_SLEEP + .pm = &pata_s3c_pm_ops, +#endif + }, +}; + +module_platform_driver_probe(pata_s3c_driver, pata_s3c_probe); + +MODULE_AUTHOR("Abhilash Kesavan, "); +MODULE_DESCRIPTION("low-level driver for Samsung PATA controller"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c new file mode 100644 index 000000000..c71de5d68 --- /dev/null +++ b/drivers/ata/pata_sc1200.c @@ -0,0 +1,269 @@ +/* + * New ATA layer SC1200 driver Alan Cox + * + * TODO: Mode selection filtering + * TODO: Needs custom DMA cleanup code + * + * Based very heavily on + * + * linux/drivers/ide/pci/sc1200.c Version 0.91 28-Jan-2003 + * + * Copyright (C) 2000-2002 Mark Lord + * May be copied or modified under the terms of the GNU General Public License + * + * Development of this chipset driver was funded + * by the nice folks at National Semiconductor. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_sc1200" +#define DRV_VERSION "0.2.6" + +#define SC1200_REV_A 0x00 +#define SC1200_REV_B1 0x01 +#define SC1200_REV_B3 0x02 +#define SC1200_REV_C1 0x03 +#define SC1200_REV_D1 0x04 + +/** + * sc1200_clock - PCI clock + * + * Return the PCI bus clocking for the SC1200 chipset configuration + * in use. We return 0 for 33MHz 1 for 48MHz and 2 for 66Mhz + */ + +static int sc1200_clock(void) +{ + /* Magic registers that give us the chipset data */ + u8 chip_id = inb(0x903C); + u8 silicon_rev = inb(0x903D); + u16 pci_clock; + + if (chip_id == 0x04 && silicon_rev < SC1200_REV_B1) + return 0; /* 33 MHz mode */ + + /* Clock generator configuration 0x901E its 8/9 are the PCI clocking + 0/3 is 33Mhz 1 is 48 2 is 66 */ + + pci_clock = inw(0x901E); + pci_clock >>= 8; + pci_clock &= 0x03; + if (pci_clock == 3) + pci_clock = 0; + return pci_clock; +} + +/** + * sc1200_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Set our PIO requirements. This is fairly simple on the SC1200 + */ + +static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const u32 pio_timings[4][5] = { + /* format0, 33Mhz */ + { 0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010 }, + /* format1, 33Mhz */ + { 0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010 }, + /* format1, 48Mhz */ + { 0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021 }, + /* format1, 66Mhz */ + { 0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131 } + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 format; + unsigned int reg = 0x40 + 0x10 * ap->port_no; + int mode = adev->pio_mode - XFER_PIO_0; + + pci_read_config_dword(pdev, reg + 4, &format); + format >>= 31; + format += sc1200_clock(); + pci_write_config_dword(pdev, reg + 8 * adev->devno, + pio_timings[format][mode]); +} + +/** + * sc1200_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * We cannot mix MWDMA and UDMA without reloading timings each switch + * master to slave. + */ + +static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u32 udma_timing[3][3] = { + { 0x00921250, 0x00911140, 0x00911030 }, + { 0x00932470, 0x00922260, 0x00922140 }, + { 0x009436A1, 0x00933481, 0x00923261 } + }; + + static const u32 mwdma_timing[3][3] = { + { 0x00077771, 0x00012121, 0x00002020 }, + { 0x000BBBB2, 0x00024241, 0x00013131 }, + { 0x000FFFF3, 0x00035352, 0x00015151 } + }; + + int clock = sc1200_clock(); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned int reg = 0x40 + 0x10 * ap->port_no; + int mode = adev->dma_mode; + u32 format; + + if (mode >= XFER_UDMA_0) + format = udma_timing[clock][mode - XFER_UDMA_0]; + else + format = mwdma_timing[clock][mode - XFER_MW_DMA_0]; + + if (adev->devno == 0) { + u32 timings; + + pci_read_config_dword(pdev, reg + 4, &timings); + timings &= 0x80000000UL; + timings |= format; + pci_write_config_dword(pdev, reg + 4, timings); + } else + pci_write_config_dword(pdev, reg + 12, format); +} + +/** + * sc1200_qc_issue - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * necessary. Specifically we have a problem that there is only + * one MWDMA/UDMA bit. + */ + +static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct ata_device *prev = ap->private_data; + + /* See if the DMA settings could be wrong */ + if (ata_dma_enabled(adev) && adev != prev && prev != NULL) { + /* Maybe, but do the channels match MWDMA/UDMA ? */ + if ((ata_using_udma(adev) && !ata_using_udma(prev)) || + (ata_using_udma(prev) && !ata_using_udma(adev))) + /* Switch the mode bits */ + sc1200_set_dmamode(ap, adev); + } + + return ata_bmdma_qc_issue(qc); +} + +/** + * sc1200_qc_defer - implement serialization + * @qc: command + * + * Serialize command issue on this controller. + */ + +static int sc1200_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_host *host = qc->ap->host; + struct ata_port *alt = host->ports[1 ^ qc->ap->port_no]; + int rc; + + /* First apply the usual rules */ + rc = ata_std_qc_defer(qc); + if (rc != 0) + return rc; + + /* Now apply serialization rules. Only allow a command if the + other channel state machine is idle */ + if (alt && alt->qc_active) + return ATA_DEFER_PORT; + return 0; +} + +static struct scsi_host_template sc1200_sht = { + ATA_BMDMA_SHT(DRV_NAME), + .sg_tablesize = LIBATA_DUMB_MAX_PRD, +}; + +static struct ata_port_operations sc1200_port_ops = { + .inherits = &ata_bmdma_port_ops, + .qc_prep = ata_bmdma_dumb_qc_prep, + .qc_issue = sc1200_qc_issue, + .qc_defer = sc1200_qc_defer, + .cable_detect = ata_cable_40wire, + .set_piomode = sc1200_set_piomode, + .set_dmamode = sc1200_set_dmamode, +}; + +/** + * sc1200_init_one - Initialise an SC1200 + * @dev: PCI device + * @id: Entry in match table + * + * Just throw the needed data at the libata helper and it does all + * our work. + */ + +static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, + .port_ops = &sc1200_port_ops + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + + return ata_pci_bmdma_init_one(dev, ppi, &sc1200_sht, NULL, 0); +} + +static const struct pci_device_id sc1200[] = { + { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_IDE), }, + + { }, +}; + +static struct pci_driver sc1200_pci_driver = { + .name = DRV_NAME, + .id_table = sc1200, + .probe = sc1200_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(sc1200_pci_driver); + +MODULE_AUTHOR("Alan Cox, Mark Lord"); +MODULE_DESCRIPTION("low-level driver for the NS/AMD SC1200"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sc1200); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c new file mode 100644 index 000000000..b920c3407 --- /dev/null +++ b/drivers/ata/pata_sch.c @@ -0,0 +1,180 @@ +/* + * pata_sch.c - Intel SCH PATA controllers + * + * Copyright (c) 2008 Alek Du + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * Supports: + * Intel SCH (AF82US15W, AF82US15L, AF82UL11L) chipsets -- see spec at: + * http://download.intel.com/design/chipsets/embedded/datashts/319537.pdf + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_sch" +#define DRV_VERSION "0.2" + +/* see SCH datasheet page 351 */ +enum { + D0TIM = 0x80, /* Device 0 Timing Register */ + D1TIM = 0x84, /* Device 1 Timing Register */ + PM = 0x07, /* PIO Mode Bit Mask */ + MDM = (0x03 << 8), /* Multi-word DMA Mode Bit Mask */ + UDM = (0x07 << 16), /* Ultra DMA Mode Bit Mask */ + PPE = (1 << 30), /* Prefetch/Post Enable */ + USD = (1 << 31), /* Use Synchronous DMA */ +}; + +static int sch_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent); +static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev); +static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev); + +static const struct pci_device_id sch_pci_tbl[] = { + /* Intel SCH PATA Controller */ + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_IDE), 0 }, + { } /* terminate list */ +}; + +static struct pci_driver sch_pci_driver = { + .name = DRV_NAME, + .id_table = sch_pci_tbl, + .probe = sch_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +static struct scsi_host_template sch_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations sch_pata_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = ata_cable_unknown, + .set_piomode = sch_set_piomode, + .set_dmamode = sch_set_dmamode, +}; + +static struct ata_port_info sch_port_info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &sch_pata_ops, +}; + +MODULE_AUTHOR("Alek Du "); +MODULE_DESCRIPTION("SCSI low-level driver for Intel SCH PATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sch_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +/** + * sch_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: ATA device + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned int port = adev->devno ? D1TIM : D0TIM; + unsigned int data; + + pci_read_config_dword(dev, port, &data); + /* see SCH datasheet page 351 */ + /* set PIO mode */ + data &= ~(PM | PPE); + data |= pio; + /* enable PPE for block device */ + if (adev->class == ATA_DEV_ATA) + data |= PPE; + pci_write_config_dword(dev, port, data); +} + +/** + * sch_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: ATA device + * + * Set MW/UDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned int dma_mode = adev->dma_mode; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned int port = adev->devno ? D1TIM : D0TIM; + unsigned int data; + + pci_read_config_dword(dev, port, &data); + /* see SCH datasheet page 351 */ + if (dma_mode >= XFER_UDMA_0) { + /* enable Synchronous DMA mode */ + data |= USD; + data &= ~UDM; + data |= (dma_mode - XFER_UDMA_0) << 16; + } else { /* must be MWDMA mode, since we masked SWDMA already */ + data &= ~(USD | MDM); + data |= (dma_mode - XFER_MW_DMA_0) << 8; + } + pci_write_config_dword(dev, port, data); +} + +/** + * sch_init_one - Register SCH ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in sch_pci_tbl matching with @pdev + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int sch_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + const struct ata_port_info *ppi[] = { &sch_port_info, NULL }; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + return ata_pci_bmdma_init_one(pdev, ppi, &sch_sht, NULL, 0); +} + +module_pci_driver(sch_pci_driver); diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c new file mode 100644 index 000000000..57de02123 --- /dev/null +++ b/drivers/ata/pata_serverworks.c @@ -0,0 +1,492 @@ +/* + * pata_serverworks.c - Serverworks PATA for new ATA layer + * (C) 2005 Red Hat Inc + * (C) 2010 Bartlomiej Zolnierkiewicz + * + * based upon + * + * serverworks.c + * + * Copyright (C) 1998-2000 Michel Aubry + * Copyright (C) 1998-2000 Andrzej Krzysztofowicz + * Copyright (C) 1998-2000 Andre Hedrick + * Portions copyright (c) 2001 Sun Microsystems + * + * + * RCC/ServerWorks IDE driver for Linux + * + * OSB4: `Open South Bridge' IDE Interface (fn 1) + * supports UDMA mode 2 (33 MB/s) + * + * CSB5: `Champion South Bridge' IDE Interface (fn 1) + * all revisions support UDMA mode 4 (66 MB/s) + * revision A2.0 and up support UDMA mode 5 (100 MB/s) + * + * *** The CSB5 does not provide ANY register *** + * *** to detect 80-conductor cable presence. *** + * + * CSB6: `Champion South Bridge' IDE Interface (optional: third channel) + * + * Documentation: + * Available under NDA only. Errata info very hard to get. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_serverworks" +#define DRV_VERSION "0.4.3" + +#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */ +#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */ + +/* Seagate Barracuda ATA IV Family drives in UDMA mode 5 + * can overrun their FIFOs when used with the CSB5 */ + +static const char *csb_bad_ata100[] = { + "ST320011A", + "ST340016A", + "ST360021A", + "ST380021A", + NULL +}; + +/** + * oem_cable - Dell/Sun serverworks cable detection + * @ap: ATA port to do cable detect + * + * Dell PowerEdge and Sun Cobalt 'Alpine' hide the 40/80 pin select + * for their interfaces in the top two bits of the subsystem ID. + */ + +static int oem_cable(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (pdev->subsystem_device & (1 << (ap->port_no + 14))) + return ATA_CBL_PATA80; + return ATA_CBL_PATA40; +} + +struct sv_cable_table { + int device; + int subvendor; + int (*cable_detect)(struct ata_port *ap); +}; + +static struct sv_cable_table cable_detect[] = { + { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, oem_cable }, + { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, oem_cable }, + { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, oem_cable }, + { PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, ata_cable_40wire }, + { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, ata_cable_unknown }, + { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, ata_cable_unknown }, + { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, ata_cable_unknown }, + { PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, ata_cable_unknown }, + { } +}; + +/** + * serverworks_cable_detect - cable detection + * @ap: ATA port + * + * Perform cable detection according to the device and subvendor + * identifications + */ + +static int serverworks_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct sv_cable_table *cb = cable_detect; + + while(cb->device) { + if (cb->device == pdev->device && + (cb->subvendor == pdev->subsystem_vendor || + cb->subvendor == PCI_ANY_ID)) { + return cb->cable_detect(ap); + } + cb++; + } + + BUG(); + return -1; /* kill compiler warning */ +} + +/** + * serverworks_is_csb - Check for CSB or OSB + * @pdev: PCI device to check + * + * Returns true if the device being checked is known to be a CSB + * series device. + */ + +static u8 serverworks_is_csb(struct pci_dev *pdev) +{ + switch (pdev->device) { + case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE: + case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE: + case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2: + case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE: + return 1; + default: + break; + } + return 0; +} + +/** + * serverworks_osb4_filter - mode selection filter + * @adev: ATA device + * @mask: Mask of proposed modes + * + * Filter the offered modes for the device to apply controller + * specific rules. OSB4 requires no UDMA for disks due to a FIFO + * bug we hit. + */ + +static unsigned long serverworks_osb4_filter(struct ata_device *adev, unsigned long mask) +{ + if (adev->class == ATA_DEV_ATA) + mask &= ~ATA_MASK_UDMA; + return mask; +} + + +/** + * serverworks_csb_filter - mode selection filter + * @adev: ATA device + * @mask: Mask of proposed modes + * + * Check the blacklist and disable UDMA5 if matched + */ + +static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned long mask) +{ + const char *p; + char model_num[ATA_ID_PROD_LEN + 1]; + int i; + + /* Disk, UDMA */ + if (adev->class != ATA_DEV_ATA) + return mask; + + /* Actually do need to check */ + ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num)); + + for (i = 0; (p = csb_bad_ata100[i]) != NULL; i++) { + if (!strcmp(p, model_num)) + mask &= ~(0xE0 << ATA_SHIFT_UDMA); + } + return mask; +} + +/** + * serverworks_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the OSB4/CSB5 timing registers for PIO. The PIO register + * load is done as a simple lookup. + */ +static void serverworks_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const u8 pio_mode[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 }; + int offset = 1 + 2 * ap->port_no - adev->devno; + int devbits = (2 * ap->port_no + adev->devno) * 4; + u16 csb5_pio; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int pio = adev->pio_mode - XFER_PIO_0; + + pci_write_config_byte(pdev, 0x40 + offset, pio_mode[pio]); + + /* The OSB4 just requires the timing but the CSB series want the + mode number as well */ + if (serverworks_is_csb(pdev)) { + pci_read_config_word(pdev, 0x4A, &csb5_pio); + csb5_pio &= ~(0x0F << devbits); + pci_write_config_word(pdev, 0x4A, csb5_pio | (pio << devbits)); + } +} + +/** + * serverworks_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the MWDMA/UDMA modes for the serverworks OSB4/CSB5 + * chipset. The MWDMA mode values are pulled from a lookup table + * while the chipset uses mode number for UDMA. + */ + +static void serverworks_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u8 dma_mode[] = { 0x77, 0x21, 0x20 }; + int offset = 1 + 2 * ap->port_no - adev->devno; + int devbits = 2 * ap->port_no + adev->devno; + u8 ultra; + u8 ultra_cfg; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_byte(pdev, 0x54, &ultra_cfg); + pci_read_config_byte(pdev, 0x56 + ap->port_no, &ultra); + ultra &= ~(0x0F << (adev->devno * 4)); + + if (adev->dma_mode >= XFER_UDMA_0) { + pci_write_config_byte(pdev, 0x44 + offset, 0x20); + + ultra |= (adev->dma_mode - XFER_UDMA_0) + << (adev->devno * 4); + ultra_cfg |= (1 << devbits); + } else { + pci_write_config_byte(pdev, 0x44 + offset, + dma_mode[adev->dma_mode - XFER_MW_DMA_0]); + ultra_cfg &= ~(1 << devbits); + } + pci_write_config_byte(pdev, 0x56 + ap->port_no, ultra); + pci_write_config_byte(pdev, 0x54, ultra_cfg); +} + +static struct scsi_host_template serverworks_osb4_sht = { + ATA_BMDMA_SHT(DRV_NAME), + .sg_tablesize = LIBATA_DUMB_MAX_PRD, +}; + +static struct scsi_host_template serverworks_csb_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations serverworks_osb4_port_ops = { + .inherits = &ata_bmdma_port_ops, + .qc_prep = ata_bmdma_dumb_qc_prep, + .cable_detect = serverworks_cable_detect, + .mode_filter = serverworks_osb4_filter, + .set_piomode = serverworks_set_piomode, + .set_dmamode = serverworks_set_dmamode, +}; + +static struct ata_port_operations serverworks_csb_port_ops = { + .inherits = &serverworks_osb4_port_ops, + .qc_prep = ata_bmdma_qc_prep, + .mode_filter = serverworks_csb_filter, +}; + +static int serverworks_fixup_osb4(struct pci_dev *pdev) +{ + u32 reg; + struct pci_dev *isa_dev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL); + if (isa_dev) { + pci_read_config_dword(isa_dev, 0x64, ®); + reg &= ~0x00002000; /* disable 600ns interrupt mask */ + if (!(reg & 0x00004000)) + printk(KERN_DEBUG DRV_NAME ": UDMA not BIOS enabled.\n"); + reg |= 0x00004000; /* enable UDMA/33 support */ + pci_write_config_dword(isa_dev, 0x64, reg); + pci_dev_put(isa_dev); + return 0; + } + printk(KERN_WARNING DRV_NAME ": Unable to find bridge.\n"); + return -ENODEV; +} + +static int serverworks_fixup_csb(struct pci_dev *pdev) +{ + u8 btr; + + /* Third Channel Test */ + if (!(PCI_FUNC(pdev->devfn) & 1)) { + struct pci_dev * findev = NULL; + u32 reg4c = 0; + findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_CSB5, NULL); + if (findev) { + pci_read_config_dword(findev, 0x4C, ®4c); + reg4c &= ~0x000007FF; + reg4c |= 0x00000040; + reg4c |= 0x00000020; + pci_write_config_dword(findev, 0x4C, reg4c); + pci_dev_put(findev); + } + } else { + struct pci_dev * findev = NULL; + u8 reg41 = 0; + + findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_CSB6, NULL); + if (findev) { + pci_read_config_byte(findev, 0x41, ®41); + reg41 &= ~0x40; + pci_write_config_byte(findev, 0x41, reg41); + pci_dev_put(findev); + } + } + /* setup the UDMA Control register + * + * 1. clear bit 6 to enable DMA + * 2. enable DMA modes with bits 0-1 + * 00 : legacy + * 01 : udma2 + * 10 : udma2/udma4 + * 11 : udma2/udma4/udma5 + */ + pci_read_config_byte(pdev, 0x5A, &btr); + btr &= ~0x40; + if (!(PCI_FUNC(pdev->devfn) & 1)) + btr |= 0x2; + else + btr |= (pdev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; + pci_write_config_byte(pdev, 0x5A, btr); + + return btr; +} + +static void serverworks_fixup_ht1000(struct pci_dev *pdev) +{ + u8 btr; + /* Setup HT1000 SouthBridge Controller - Single Channel Only */ + pci_read_config_byte(pdev, 0x5A, &btr); + btr &= ~0x40; + btr |= 0x3; + pci_write_config_byte(pdev, 0x5A, btr); +} + +static int serverworks_fixup(struct pci_dev *pdev) +{ + int rc = 0; + + /* Force master latency timer to 64 PCI clocks */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40); + + switch (pdev->device) { + case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE: + rc = serverworks_fixup_osb4(pdev); + break; + case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE: + ata_pci_bmdma_clear_simplex(pdev); + /* fall through */ + case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE: + case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2: + rc = serverworks_fixup_csb(pdev); + break; + case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE: + serverworks_fixup_ht1000(pdev); + break; + } + + return rc; +} + +static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info info[4] = { + { /* OSB4 */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, + .port_ops = &serverworks_osb4_port_ops + }, { /* OSB4 no UDMA */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + /* No UDMA */ + .port_ops = &serverworks_osb4_port_ops + }, { /* CSB5 */ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, + .port_ops = &serverworks_csb_port_ops + }, { /* CSB5 - later revisions*/ + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &serverworks_csb_port_ops + } + }; + const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL }; + struct scsi_host_template *sht = &serverworks_csb_sht; + int rc; + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + rc = serverworks_fixup(pdev); + + /* OSB4 : South Bridge and IDE */ + if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { + /* Select non UDMA capable OSB4 if we can't do fixups */ + if (rc < 0) + ppi[0] = &info[1]; + sht = &serverworks_osb4_sht; + } + /* setup CSB5/CSB6 : South Bridge and IDE option RAID */ + else if ((pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) || + (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || + (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) { + + /* If the returned btr is the newer revision then + select the right info block */ + if (rc == 3) + ppi[0] = &info[3]; + + /* Is this the 3rd channel CSB6 IDE ? */ + if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2) + ppi[1] = &ata_dummy_port_info; + } + + return ata_pci_bmdma_init_one(pdev, ppi, sht, NULL, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int serverworks_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + (void)serverworks_fixup(pdev); + + ata_host_resume(host); + return 0; +} +#endif + +static const struct pci_device_id serverworks[] = { + { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0}, + { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 2}, + { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2}, + { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 2}, + { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 2}, + + { }, +}; + +static struct pci_driver serverworks_pci_driver = { + .name = DRV_NAME, + .id_table = serverworks, + .probe = serverworks_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = serverworks_reinit_one, +#endif +}; + +module_pci_driver(serverworks_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Serverworks OSB4/CSB5/CSB6"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, serverworks); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c new file mode 100644 index 000000000..c14071be4 --- /dev/null +++ b/drivers/ata/pata_sil680.c @@ -0,0 +1,444 @@ +/* + * pata_sil680.c - SIL680 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * + * based upon + * + * linux/drivers/ide/pci/siimage.c Version 1.07 Nov 30, 2003 + * + * Copyright (C) 2001-2002 Andre Hedrick + * Copyright (C) 2003 Red Hat + * + * May be copied or modified under the terms of the GNU General Public License + * + * Documentation publicly available. + * + * If you have strange problems with nVidia chipset systems please + * see the SI support documentation and update your system BIOS + * if necessary + * + * TODO + * If we know all our devices are LBA28 (or LBA28 sized) we could use + * the command fifo mode. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_sil680" +#define DRV_VERSION "0.4.9" + +#define SIL680_MMIO_BAR 5 + +/** + * sil680_selreg - return register base + * @ap: ATA interface + * @r: config offset + * + * Turn a config register offset into the right address in PCI space + * to access the control register in question. + * + * Thankfully this is a configuration operation so isn't performance + * criticial. + */ + +static unsigned long sil680_selreg(struct ata_port *ap, int r) +{ + unsigned long base = 0xA0 + r; + base += (ap->port_no << 4); + return base; +} + +/** + * sil680_seldev - return register base + * @ap: ATA interface + * @r: config offset + * + * Turn a config register offset into the right address in PCI space + * to access the control register in question including accounting for + * the unit shift. + */ + +static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r) +{ + unsigned long base = 0xA0 + r; + base += (ap->port_no << 4); + base |= adev->devno ? 2 : 0; + return base; +} + + +/** + * sil680_cable_detect - cable detection + * @ap: ATA port + * + * Perform cable detection. The SIL680 stores this in PCI config + * space for us. + */ + +static int sil680_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long addr = sil680_selreg(ap, 0); + u8 ata66; + pci_read_config_byte(pdev, addr, &ata66); + if (ata66 & 1) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + +/** + * sil680_set_piomode - set PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the SIL680 registers for PIO mode. Note that the task speed + * registers are shared between the devices so we must pick the lowest + * mode for command work. + */ + +static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const u16 speed_p[5] = { + 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 + }; + static const u16 speed_t[5] = { + 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1 + }; + + unsigned long tfaddr = sil680_selreg(ap, 0x02); + unsigned long addr = sil680_seldev(ap, adev, 0x04); + unsigned long addr_mask = 0x80 + 4 * ap->port_no; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int pio = adev->pio_mode - XFER_PIO_0; + int lowest_pio = pio; + int port_shift = 4 * adev->devno; + u16 reg; + u8 mode; + + struct ata_device *pair = ata_dev_pair(adev); + + if (pair != NULL && adev->pio_mode > pair->pio_mode) + lowest_pio = pair->pio_mode - XFER_PIO_0; + + pci_write_config_word(pdev, addr, speed_p[pio]); + pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]); + + pci_read_config_word(pdev, tfaddr-2, ®); + pci_read_config_byte(pdev, addr_mask, &mode); + + reg &= ~0x0200; /* Clear IORDY */ + mode &= ~(3 << port_shift); /* Clear IORDY and DMA bits */ + + if (ata_pio_need_iordy(adev)) { + reg |= 0x0200; /* Enable IORDY */ + mode |= 1 << port_shift; + } + pci_write_config_word(pdev, tfaddr-2, reg); + pci_write_config_byte(pdev, addr_mask, mode); +} + +/** + * sil680_set_dmamode - set DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the MWDMA/UDMA modes for the sil680 chipset. + * + * The MWDMA mode values are pulled from a lookup table + * while the chipset uses mode number for UDMA. + */ + +static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u8 ultra_table[2][7] = { + { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01, 0xFF }, /* 100MHz */ + { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }, /* 133Mhz */ + }; + static const u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long ma = sil680_seldev(ap, adev, 0x08); + unsigned long ua = sil680_seldev(ap, adev, 0x0C); + unsigned long addr_mask = 0x80 + 4 * ap->port_no; + int port_shift = adev->devno * 4; + u8 scsc, mode; + u16 multi, ultra; + + pci_read_config_byte(pdev, 0x8A, &scsc); + pci_read_config_byte(pdev, addr_mask, &mode); + pci_read_config_word(pdev, ma, &multi); + pci_read_config_word(pdev, ua, &ultra); + + /* Mask timing bits */ + ultra &= ~0x3F; + mode &= ~(0x03 << port_shift); + + /* Extract scsc */ + scsc = (scsc & 0x30) ? 1 : 0; + + if (adev->dma_mode >= XFER_UDMA_0) { + multi = 0x10C1; + ultra |= ultra_table[scsc][adev->dma_mode - XFER_UDMA_0]; + mode |= (0x03 << port_shift); + } else { + multi = dma_table[adev->dma_mode - XFER_MW_DMA_0]; + mode |= (0x02 << port_shift); + } + pci_write_config_byte(pdev, addr_mask, mode); + pci_write_config_word(pdev, ma, multi); + pci_write_config_word(pdev, ua, ultra); +} + +/** + * sil680_sff_exec_command - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues ATA command, with proper synchronization with interrupt + * handler / other threads. Use our MMIO space for PCI posting to avoid + * a hideously slow cycle all the way to the device. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static void sil680_sff_exec_command(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); + iowrite8(tf->command, ap->ioaddr.command_addr); + ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); +} + +static bool sil680_sff_irq_check(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long addr = sil680_selreg(ap, 1); + u8 val; + + pci_read_config_byte(pdev, addr, &val); + + return val & 0x08; +} + +static struct scsi_host_template sil680_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + + +static struct ata_port_operations sil680_port_ops = { + .inherits = &ata_bmdma32_port_ops, + .sff_exec_command = sil680_sff_exec_command, + .sff_irq_check = sil680_sff_irq_check, + .cable_detect = sil680_cable_detect, + .set_piomode = sil680_set_piomode, + .set_dmamode = sil680_set_dmamode, +}; + +/** + * sil680_init_chip - chip setup + * @pdev: PCI device + * + * Perform all the chip setup which must be done both when the device + * is powered up on boot and when we resume in case we resumed from RAM. + * Returns the final clock settings. + */ + +static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio) +{ + u8 tmpbyte = 0; + + /* FIXME: double check */ + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, + pdev->revision ? 1 : 255); + + pci_write_config_byte(pdev, 0x80, 0x00); + pci_write_config_byte(pdev, 0x84, 0x00); + + pci_read_config_byte(pdev, 0x8A, &tmpbyte); + + dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n", + tmpbyte & 1, tmpbyte & 0x30); + + *try_mmio = 0; +#ifdef CONFIG_PPC + if (machine_is(cell)) + *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5); +#endif + + switch (tmpbyte & 0x30) { + case 0x00: + /* 133 clock attempt to force it on */ + pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10); + break; + case 0x30: + /* if clocking is disabled */ + /* 133 clock attempt to force it on */ + pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20); + break; + case 0x10: + /* 133 already */ + break; + case 0x20: + /* BIOS set PCI x2 clocking */ + break; + } + + pci_read_config_byte(pdev, 0x8A, &tmpbyte); + dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n", + tmpbyte & 1, tmpbyte & 0x30); + + pci_write_config_byte(pdev, 0xA1, 0x72); + pci_write_config_word(pdev, 0xA2, 0x328A); + pci_write_config_dword(pdev, 0xA4, 0x62DD62DD); + pci_write_config_dword(pdev, 0xA8, 0x43924392); + pci_write_config_dword(pdev, 0xAC, 0x40094009); + pci_write_config_byte(pdev, 0xB1, 0x72); + pci_write_config_word(pdev, 0xB2, 0x328A); + pci_write_config_dword(pdev, 0xB4, 0x62DD62DD); + pci_write_config_dword(pdev, 0xB8, 0x43924392); + pci_write_config_dword(pdev, 0xBC, 0x40094009); + + switch (tmpbyte & 0x30) { + case 0x00: + printk(KERN_INFO "sil680: 100MHz clock.\n"); + break; + case 0x10: + printk(KERN_INFO "sil680: 133MHz clock.\n"); + break; + case 0x20: + printk(KERN_INFO "sil680: Using PCI clock.\n"); + break; + /* This last case is _NOT_ ok */ + case 0x30: + printk(KERN_ERR "sil680: Clock disabled ?\n"); + } + return tmpbyte & 0x30; +} + +static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &sil680_port_ops + }; + static const struct ata_port_info info_slow = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &sil680_port_ops + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + struct ata_host *host; + void __iomem *mmio_base; + int rc, try_mmio; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + switch (sil680_init_chip(pdev, &try_mmio)) { + case 0: + ppi[0] = &info_slow; + break; + case 0x30: + return -ENODEV; + } + + if (!try_mmio) + goto use_ioports; + + /* Try to acquire MMIO resources and fallback to PIO if + * that fails + */ + rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME); + if (rc) + goto use_ioports; + + /* Allocate host and set it up */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2); + if (!host) + return -ENOMEM; + host->iomap = pcim_iomap_table(pdev); + + /* Setup DMA masks */ + rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + pci_set_master(pdev); + + /* Get MMIO base and initialize port addresses */ + mmio_base = host->iomap[SIL680_MMIO_BAR]; + host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x00; + host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80; + host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a; + host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a; + ata_sff_std_ports(&host->ports[0]->ioaddr); + host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08; + host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0; + host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca; + host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca; + ata_sff_std_ports(&host->ports[1]->ioaddr); + + /* Register & activate */ + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, + IRQF_SHARED, &sil680_sht); + +use_ioports: + return ata_pci_bmdma_init_one(pdev, ppi, &sil680_sht, NULL, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int sil680_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int try_mmio, rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + sil680_init_chip(pdev, &try_mmio); + ata_host_resume(host); + return 0; +} +#endif + +static const struct pci_device_id sil680[] = { + { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), }, + + { }, +}; + +static struct pci_driver sil680_pci_driver = { + .name = DRV_NAME, + .id_table = sil680, + .probe = sil680_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = sil680_reinit_one, +#endif +}; + +module_pci_driver(sil680_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for SI680 PATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sil680); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c new file mode 100644 index 000000000..626f989d5 --- /dev/null +++ b/drivers/ata/pata_sis.c @@ -0,0 +1,914 @@ +/* + * pata_sis.c - SiS ATA driver + * + * (C) 2005 Red Hat + * (C) 2007,2009 Bartlomiej Zolnierkiewicz + * + * Based upon linux/drivers/ide/pci/sis5513.c + * Copyright (C) 1999-2000 Andre Hedrick + * Copyright (C) 2002 Lionel Bouton , Maintainer + * Copyright (C) 2003 Vojtech Pavlik + * SiS Taiwan : for direct support and hardware. + * Daniela Engert : for initial ATA100 advices and numerous others. + * John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt : + * for checking code correctness, providing patches. + * Original tests and design on the SiS620 chipset. + * ATA100 tests and design on the SiS735 chipset. + * ATA16/33 support from specs + * ATA133 support for SiS961/962 by L.C. Chang + * + * + * TODO + * Check MWDMA on drives that don't support MWDMA speed pio cycles ? + * More Testing + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sis.h" + +#define DRV_NAME "pata_sis" +#define DRV_VERSION "0.5.2" + +struct sis_chipset { + u16 device; /* PCI host ID */ + const struct ata_port_info *info; /* Info block */ + /* Probably add family, cable detect type etc here to clean + up code later */ +}; + +struct sis_laptop { + u16 device; + u16 subvendor; + u16 subdevice; +}; + +static const struct sis_laptop sis_laptop[] = { + /* devid, subvendor, subdev */ + { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ + { 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */ + { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ + /* end marker */ + { 0, } +}; + +static int sis_short_ata40(struct pci_dev *dev) +{ + const struct sis_laptop *lap = &sis_laptop[0]; + + while (lap->device) { + if (lap->device == dev->device && + lap->subvendor == dev->subsystem_vendor && + lap->subdevice == dev->subsystem_device) + return 1; + lap++; + } + + return 0; +} + +/** + * sis_old_port_base - return PCI configuration base for dev + * @adev: device + * + * Returns the base of the PCI configuration registers for this port + * number. + */ + +static int sis_old_port_base(struct ata_device *adev) +{ + return 0x40 + (4 * adev->link->ap->port_no) + (2 * adev->devno); +} + +/** + * sis_port_base - return PCI configuration base for dev + * @adev: device + * + * Returns the base of the PCI configuration registers for this port + * number. + */ + +static int sis_port_base(struct ata_device *adev) +{ + struct ata_port *ap = adev->link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = 0x40; + u32 reg54; + + /* If bit 30 is set then the registers are mapped at 0x70 not 0x40 */ + pci_read_config_dword(pdev, 0x54, ®54); + if (reg54 & 0x40000000) + port = 0x70; + + return port + (8 * ap->port_no) + (4 * adev->devno); +} + +/** + * sis_133_cable_detect - check for 40/80 pin + * @ap: Port + * @deadline: deadline jiffies for the operation + * + * Perform cable detection for the later UDMA133 capable + * SiS chipset. + */ + +static int sis_133_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 tmp; + + /* The top bit of this register is the cable detect bit */ + pci_read_config_word(pdev, 0x50 + 2 * ap->port_no, &tmp); + if ((tmp & 0x8000) && !sis_short_ata40(pdev)) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + +/** + * sis_66_cable_detect - check for 40/80 pin + * @ap: Port + * + * Perform cable detection on the UDMA66, UDMA100 and early UDMA133 + * SiS IDE controllers. + */ + +static int sis_66_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 tmp; + + /* Older chips keep cable detect in bits 4/5 of reg 0x48 */ + pci_read_config_byte(pdev, 0x48, &tmp); + tmp >>= ap->port_no; + if ((tmp & 0x10) && !sis_short_ata40(pdev)) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + + +/** + * sis_pre_reset - probe begin + * @link: ATA link + * @deadline: deadline jiffies for the operation + * + * Set up cable type and use generic probe init + */ + +static int sis_pre_reset(struct ata_link *link, unsigned long deadline) +{ + static const struct pci_bits sis_enable_bits[] = { + { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */ + { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */ + }; + + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) + return -ENOENT; + + /* Clear the FIFO settings. We can't enable the FIFO until + we know we are poking at a disk */ + pci_write_config_byte(pdev, 0x4B, 0); + return ata_sff_prereset(link, deadline); +} + + +/** + * sis_set_fifo - Set RWP fifo bits for this device + * @ap: Port + * @adev: Device + * + * SIS chipsets implement prefetch/postwrite bits for each device + * on both channels. This functionality is not ATAPI compatible and + * must be configured according to the class of device present + */ + +static void sis_set_fifo(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 fifoctrl; + u8 mask = 0x11; + + mask <<= (2 * ap->port_no); + mask <<= adev->devno; + + /* This holds various bits including the FIFO control */ + pci_read_config_byte(pdev, 0x4B, &fifoctrl); + fifoctrl &= ~mask; + + /* Enable for ATA (disk) only */ + if (adev->class == ATA_DEV_ATA) + fifoctrl |= mask; + pci_write_config_byte(pdev, 0x4B, fifoctrl); +} + +/** + * sis_old_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring for. + * + * Set PIO mode for device, in host controller PCI config space. This + * function handles PIO set up for all chips that are pre ATA100 and + * also early ATA100 devices. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = sis_old_port_base(adev); + u8 t1, t2; + int speed = adev->pio_mode - XFER_PIO_0; + + static const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 }; + static const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 }; + + sis_set_fifo(ap, adev); + + pci_read_config_byte(pdev, port, &t1); + pci_read_config_byte(pdev, port + 1, &t2); + + t1 &= ~0x0F; /* Clear active/recovery timings */ + t2 &= ~0x07; + + t1 |= active[speed]; + t2 |= recovery[speed]; + + pci_write_config_byte(pdev, port, t1); + pci_write_config_byte(pdev, port + 1, t2); +} + +/** + * sis_100_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring for. + * + * Set PIO mode for device, in host controller PCI config space. This + * function handles PIO set up for ATA100 devices and early ATA133. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = sis_old_port_base(adev); + int speed = adev->pio_mode - XFER_PIO_0; + + static const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 }; + + sis_set_fifo(ap, adev); + + pci_write_config_byte(pdev, port, actrec[speed]); +} + +/** + * sis_133_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring for. + * + * Set PIO mode for device, in host controller PCI config space. This + * function handles PIO set up for the later ATA133 devices. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port; + u32 t1; + int speed = adev->pio_mode - XFER_PIO_0; + + static const u32 timing133[] = { + 0x28269000, /* Recovery << 24 | Act << 16 | Ini << 12 */ + 0x0C266000, + 0x04263000, + 0x0C0A3000, + 0x05093000 + }; + static const u32 timing100[] = { + 0x1E1C6000, /* Recovery << 24 | Act << 16 | Ini << 12 */ + 0x091C4000, + 0x031C2000, + 0x09072000, + 0x04062000 + }; + + sis_set_fifo(ap, adev); + + port = sis_port_base(adev); + pci_read_config_dword(pdev, port, &t1); + t1 &= 0xC0C00FFF; /* Mask out timing */ + + if (t1 & 0x08) /* 100 or 133 ? */ + t1 |= timing133[speed]; + else + t1 |= timing100[speed]; + pci_write_config_byte(pdev, port, t1); +} + +/** + * sis_old_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles pre UDMA and UDMA33 devices. Supports MWDMA as well unlike + * the old ide/pci driver. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int drive_pci = sis_old_port_base(adev); + u16 timing; + + static const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; + static const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 }; + + pci_read_config_word(pdev, drive_pci, &timing); + + if (adev->dma_mode < XFER_UDMA_0) { + /* bits 3-0 hold recovery timing bits 8-10 active timing and + the higher bits are dependent on the device */ + timing &= ~0x870F; + timing |= mwdma_bits[speed]; + } else { + /* Bit 15 is UDMA on/off, bit 13-14 are cycle time */ + speed = adev->dma_mode - XFER_UDMA_0; + timing &= ~0x6000; + timing |= udma_bits[speed]; + } + pci_write_config_word(pdev, drive_pci, timing); +} + +/** + * sis_66_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles UDMA66 and early UDMA100 devices. Supports MWDMA as well unlike + * the old ide/pci driver. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int drive_pci = sis_old_port_base(adev); + u16 timing; + + /* MWDMA 0-2 and UDMA 0-5 */ + static const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; + static const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 }; + + pci_read_config_word(pdev, drive_pci, &timing); + + if (adev->dma_mode < XFER_UDMA_0) { + /* bits 3-0 hold recovery timing bits 8-10 active timing and + the higher bits are dependent on the device, bit 15 udma */ + timing &= ~0x870F; + timing |= mwdma_bits[speed]; + } else { + /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */ + speed = adev->dma_mode - XFER_UDMA_0; + timing &= ~0xF000; + timing |= udma_bits[speed]; + } + pci_write_config_word(pdev, drive_pci, timing); +} + +/** + * sis_100_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles UDMA66 and early UDMA100 devices. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int drive_pci = sis_old_port_base(adev); + u8 timing; + + static const u8 udma_bits[] = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81}; + + pci_read_config_byte(pdev, drive_pci + 1, &timing); + + if (adev->dma_mode < XFER_UDMA_0) { + /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */ + } else { + /* Bit 7 is UDMA on/off, bit 0-3 are cycle time */ + speed = adev->dma_mode - XFER_UDMA_0; + timing &= ~0x8F; + timing |= udma_bits[speed]; + } + pci_write_config_byte(pdev, drive_pci + 1, timing); +} + +/** + * sis_133_early_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles early SiS 961 bridges. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int drive_pci = sis_old_port_base(adev); + u8 timing; + /* Low 4 bits are timing */ + static const u8 udma_bits[] = { 0x8F, 0x8A, 0x87, 0x85, 0x83, 0x82, 0x81}; + + pci_read_config_byte(pdev, drive_pci + 1, &timing); + + if (adev->dma_mode < XFER_UDMA_0) { + /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */ + } else { + /* Bit 7 is UDMA on/off, bit 0-3 are cycle time */ + speed = adev->dma_mode - XFER_UDMA_0; + timing &= ~0x8F; + timing |= udma_bits[speed]; + } + pci_write_config_byte(pdev, drive_pci + 1, timing); +} + +/** + * sis_133_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port; + u32 t1; + + port = sis_port_base(adev); + pci_read_config_dword(pdev, port, &t1); + + if (adev->dma_mode < XFER_UDMA_0) { + /* Recovery << 24 | Act << 16 | Ini << 12, like PIO modes */ + static const u32 timing_u100[] = { 0x19154000, 0x06072000, 0x04062000 }; + static const u32 timing_u133[] = { 0x221C6000, 0x0C0A3000, 0x05093000 }; + int speed = adev->dma_mode - XFER_MW_DMA_0; + + t1 &= 0xC0C00FFF; + /* disable UDMA */ + t1 &= ~0x00000004; + if (t1 & 0x08) + t1 |= timing_u133[speed]; + else + t1 |= timing_u100[speed]; + } else { + /* bits 4- cycle time 8 - cvs time */ + static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 }; + static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 }; + int speed = adev->dma_mode - XFER_UDMA_0; + + t1 &= ~0x00000FF0; + /* enable UDMA */ + t1 |= 0x00000004; + if (t1 & 0x08) + t1 |= timing_u133[speed]; + else + t1 |= timing_u100[speed]; + } + pci_write_config_dword(pdev, port, t1); +} + +/** + * sis_133_mode_filter - mode selection filter + * @adev: ATA device + * + * Block UDMA6 on devices that do not support it. + */ + +static unsigned long sis_133_mode_filter(struct ata_device *adev, unsigned long mask) +{ + struct ata_port *ap = adev->link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = sis_port_base(adev); + u32 t1; + + pci_read_config_dword(pdev, port, &t1); + /* if ATA133 is disabled, mask it out */ + if (!(t1 & 0x08)) + mask &= ~(0xC0 << ATA_SHIFT_UDMA); + return mask; +} + +static struct scsi_host_template sis_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations sis_133_for_sata_ops = { + .inherits = &ata_bmdma_port_ops, + .set_piomode = sis_133_set_piomode, + .set_dmamode = sis_133_set_dmamode, + .cable_detect = sis_133_cable_detect, +}; + +static struct ata_port_operations sis_base_ops = { + .inherits = &ata_bmdma_port_ops, + .prereset = sis_pre_reset, +}; + +static struct ata_port_operations sis_133_ops = { + .inherits = &sis_base_ops, + .set_piomode = sis_133_set_piomode, + .set_dmamode = sis_133_set_dmamode, + .cable_detect = sis_133_cable_detect, + .mode_filter = sis_133_mode_filter, +}; + +static struct ata_port_operations sis_133_early_ops = { + .inherits = &sis_base_ops, + .set_piomode = sis_100_set_piomode, + .set_dmamode = sis_133_early_set_dmamode, + .cable_detect = sis_66_cable_detect, +}; + +static struct ata_port_operations sis_100_ops = { + .inherits = &sis_base_ops, + .set_piomode = sis_100_set_piomode, + .set_dmamode = sis_100_set_dmamode, + .cable_detect = sis_66_cable_detect, +}; + +static struct ata_port_operations sis_66_ops = { + .inherits = &sis_base_ops, + .set_piomode = sis_old_set_piomode, + .set_dmamode = sis_66_set_dmamode, + .cable_detect = sis_66_cable_detect, +}; + +static struct ata_port_operations sis_old_ops = { + .inherits = &sis_base_ops, + .set_piomode = sis_old_set_piomode, + .set_dmamode = sis_old_set_dmamode, + .cable_detect = ata_cable_40wire, +}; + +static const struct ata_port_info sis_info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + /* No UDMA */ + .port_ops = &sis_old_ops, +}; +static const struct ata_port_info sis_info33 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, + .port_ops = &sis_old_ops, +}; +static const struct ata_port_info sis_info66 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + /* No MWDMA */ + .udma_mask = ATA_UDMA4, + .port_ops = &sis_66_ops, +}; +static const struct ata_port_info sis_info100 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + /* No MWDMA */ + .udma_mask = ATA_UDMA5, + .port_ops = &sis_100_ops, +}; +static const struct ata_port_info sis_info100_early = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + /* No MWDMA */ + .udma_mask = ATA_UDMA5, + .port_ops = &sis_66_ops, +}; +static const struct ata_port_info sis_info133 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &sis_133_ops, +}; +const struct ata_port_info sis_info133_for_sata = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + /* No MWDMA */ + .udma_mask = ATA_UDMA6, + .port_ops = &sis_133_for_sata_ops, +}; +static const struct ata_port_info sis_info133_early = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + /* No MWDMA */ + .udma_mask = ATA_UDMA6, + .port_ops = &sis_133_early_ops, +}; + +/* Privately shared with the SiS180 SATA driver, not for use elsewhere */ +EXPORT_SYMBOL_GPL(sis_info133_for_sata); + +static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis) +{ + u16 regw; + u8 reg; + + if (sis->info == &sis_info133) { + pci_read_config_word(pdev, 0x50, ®w); + if (regw & 0x08) + pci_write_config_word(pdev, 0x50, regw & ~0x08); + pci_read_config_word(pdev, 0x52, ®w); + if (regw & 0x08) + pci_write_config_word(pdev, 0x52, regw & ~0x08); + return; + } + + if (sis->info == &sis_info133_early || sis->info == &sis_info100) { + /* Fix up latency */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80); + /* Set compatibility bit */ + pci_read_config_byte(pdev, 0x49, ®); + if (!(reg & 0x01)) + pci_write_config_byte(pdev, 0x49, reg | 0x01); + return; + } + + if (sis->info == &sis_info66 || sis->info == &sis_info100_early) { + /* Fix up latency */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80); + /* Set compatibility bit */ + pci_read_config_byte(pdev, 0x52, ®); + if (!(reg & 0x04)) + pci_write_config_byte(pdev, 0x52, reg | 0x04); + return; + } + + if (sis->info == &sis_info33) { + pci_read_config_byte(pdev, PCI_CLASS_PROG, ®); + if (( reg & 0x0F ) != 0x00) + pci_write_config_byte(pdev, PCI_CLASS_PROG, reg & 0xF0); + /* Fall through to ATA16 fixup below */ + } + + if (sis->info == &sis_info || sis->info == &sis_info33) { + /* force per drive recovery and active timings + needed on ATA_33 and below chips */ + pci_read_config_byte(pdev, 0x52, ®); + if (!(reg & 0x08)) + pci_write_config_byte(pdev, 0x52, reg|0x08); + return; + } + + BUG(); +} + +/** + * sis_init_one - Register SiS ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in sis_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + const struct ata_port_info *ppi[] = { NULL, NULL }; + struct pci_dev *host = NULL; + struct sis_chipset *chipset = NULL; + struct sis_chipset *sets; + int rc; + + static struct sis_chipset sis_chipsets[] = { + + { 0x0968, &sis_info133 }, + { 0x0966, &sis_info133 }, + { 0x0965, &sis_info133 }, + { 0x0745, &sis_info100 }, + { 0x0735, &sis_info100 }, + { 0x0733, &sis_info100 }, + { 0x0635, &sis_info100 }, + { 0x0633, &sis_info100 }, + + { 0x0730, &sis_info100_early }, /* 100 with ATA 66 layout */ + { 0x0550, &sis_info100_early }, /* 100 with ATA 66 layout */ + + { 0x0640, &sis_info66 }, + { 0x0630, &sis_info66 }, + { 0x0620, &sis_info66 }, + { 0x0540, &sis_info66 }, + { 0x0530, &sis_info66 }, + + { 0x5600, &sis_info33 }, + { 0x5598, &sis_info33 }, + { 0x5597, &sis_info33 }, + { 0x5591, &sis_info33 }, + { 0x5582, &sis_info33 }, + { 0x5581, &sis_info33 }, + + { 0x5596, &sis_info }, + { 0x5571, &sis_info }, + { 0x5517, &sis_info }, + { 0x5511, &sis_info }, + + {0} + }; + static struct sis_chipset sis133_early = { + 0x0, &sis_info133_early + }; + static struct sis_chipset sis133 = { + 0x0, &sis_info133 + }; + static struct sis_chipset sis100_early = { + 0x0, &sis_info100_early + }; + static struct sis_chipset sis100 = { + 0x0, &sis_info100 + }; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* We have to find the bridge first */ + for (sets = &sis_chipsets[0]; sets->device; sets++) { + host = pci_get_device(PCI_VENDOR_ID_SI, sets->device, NULL); + if (host != NULL) { + chipset = sets; /* Match found */ + if (sets->device == 0x630) { /* SIS630 */ + if (host->revision >= 0x30) /* 630 ET */ + chipset = &sis100_early; + } + break; + } + } + + /* Look for concealed bridges */ + if (chipset == NULL) { + /* Second check */ + u32 idemisc; + u16 trueid; + + /* Disable ID masking and register remapping then + see what the real ID is */ + + pci_read_config_dword(pdev, 0x54, &idemisc); + pci_write_config_dword(pdev, 0x54, idemisc & 0x7fffffff); + pci_read_config_word(pdev, PCI_DEVICE_ID, &trueid); + pci_write_config_dword(pdev, 0x54, idemisc); + + switch(trueid) { + case 0x5518: /* SIS 962/963 */ + dev_info(&pdev->dev, + "SiS 962/963 MuTIOL IDE UDMA133 controller\n"); + chipset = &sis133; + if ((idemisc & 0x40000000) == 0) { + pci_write_config_dword(pdev, 0x54, idemisc | 0x40000000); + dev_info(&pdev->dev, + "Switching to 5513 register mapping\n"); + } + break; + case 0x0180: /* SIS 965/965L */ + chipset = &sis133; + break; + case 0x1180: /* SIS 966/966L */ + chipset = &sis133; + break; + } + } + + /* Further check */ + if (chipset == NULL) { + struct pci_dev *lpc_bridge; + u16 trueid; + u8 prefctl; + u8 idecfg; + + /* Try the second unmasking technique */ + pci_read_config_byte(pdev, 0x4a, &idecfg); + pci_write_config_byte(pdev, 0x4a, idecfg | 0x10); + pci_read_config_word(pdev, PCI_DEVICE_ID, &trueid); + pci_write_config_byte(pdev, 0x4a, idecfg); + + switch(trueid) { + case 0x5517: + lpc_bridge = pci_get_slot(pdev->bus, 0x10); /* Bus 0 Dev 2 Fn 0 */ + if (lpc_bridge == NULL) + break; + pci_read_config_byte(pdev, 0x49, &prefctl); + pci_dev_put(lpc_bridge); + + if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) { + chipset = &sis133_early; + break; + } + chipset = &sis100; + break; + } + } + pci_dev_put(host); + + /* No chipset info, no support */ + if (chipset == NULL) + return -ENODEV; + + ppi[0] = chipset->info; + + sis_fixup(pdev, chipset); + + return ata_pci_bmdma_init_one(pdev, ppi, &sis_sht, chipset, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int sis_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + sis_fixup(pdev, host->private_data); + + ata_host_resume(host); + return 0; +} +#endif + +static const struct pci_device_id sis_pci_tbl[] = { + { PCI_VDEVICE(SI, 0x5513), }, /* SiS 5513 */ + { PCI_VDEVICE(SI, 0x5518), }, /* SiS 5518 */ + { PCI_VDEVICE(SI, 0x1180), }, /* SiS 1180 */ + + { } +}; + +static struct pci_driver sis_pci_driver = { + .name = DRV_NAME, + .id_table = sis_pci_tbl, + .probe = sis_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = sis_reinit_one, +#endif +}; + +module_pci_driver(sis_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for SiS ATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sis_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c new file mode 100644 index 000000000..4935f61f6 --- /dev/null +++ b/drivers/ata/pata_sl82c105.c @@ -0,0 +1,380 @@ +/* + * pata_sl82c105.c - SL82C105 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * (C) 2011 Bartlomiej Zolnierkiewicz + * + * Based in part on linux/drivers/ide/pci/sl82c105.c + * SL82C105/Winbond 553 IDE driver + * + * and in part on the documentation and errata sheet + * + * + * Note: The controller like many controllers has shared timings for + * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back + * in the dma_stop function. Thus we actually don't need a set_dmamode + * method as the PIO method is always called and will set the right PIO + * timing parameters. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_sl82c105" +#define DRV_VERSION "0.3.3" + +enum { + /* + * SL82C105 PCI config register 0x40 bits. + */ + CTRL_IDE_IRQB = (1 << 30), + CTRL_IDE_IRQA = (1 << 28), + CTRL_LEGIRQ = (1 << 11), + CTRL_P1F16 = (1 << 5), + CTRL_P1EN = (1 << 4), + CTRL_P0F16 = (1 << 1), + CTRL_P0EN = (1 << 0) +}; + +/** + * sl82c105_pre_reset - probe begin + * @link: ATA link + * @deadline: deadline jiffies for the operation + * + * Set up cable type and use generic probe init + */ + +static int sl82c105_pre_reset(struct ata_link *link, unsigned long deadline) +{ + static const struct pci_bits sl82c105_enable_bits[] = { + { 0x40, 1, 0x01, 0x01 }, + { 0x40, 1, 0x10, 0x10 } + }; + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no])) + return -ENOENT; + return ata_sff_prereset(link, deadline); +} + + +/** + * sl82c105_configure_piomode - set chip PIO timing + * @ap: ATA interface + * @adev: ATA device + * @pio: PIO mode + * + * Called to do the PIO mode setup. Our timing registers are shared + * so a configure_dmamode call will undo any work we do here and vice + * versa + */ + +static void sl82c105_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static u16 pio_timing[5] = { + 0x50D, 0x407, 0x304, 0x242, 0x240 + }; + u16 dummy; + int timing = 0x44 + (8 * ap->port_no) + (4 * adev->devno); + + pci_write_config_word(pdev, timing, pio_timing[pio]); + /* Can we lose this oddity of the old driver */ + pci_read_config_word(pdev, timing, &dummy); +} + +/** + * sl82c105_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. Our timing registers are shared + * but we want to set the PIO timing by default. + */ + +static void sl82c105_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + sl82c105_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0); +} + +/** + * sl82c105_configure_dmamode - set DMA mode in chip + * @ap: ATA interface + * @adev: ATA device + * + * Load DMA cycle times into the chip ready for a DMA transfer + * to occur. + */ + +static void sl82c105_configure_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static u16 dma_timing[3] = { + 0x707, 0x201, 0x200 + }; + u16 dummy; + int timing = 0x44 + (8 * ap->port_no) + (4 * adev->devno); + int dma = adev->dma_mode - XFER_MW_DMA_0; + + pci_write_config_word(pdev, timing, dma_timing[dma]); + /* Can we lose this oddity of the old driver */ + pci_read_config_word(pdev, timing, &dummy); +} + +/** + * sl82c105_reset_engine - Reset the DMA engine + * @ap: ATA interface + * + * The sl82c105 has some serious problems with the DMA engine + * when transfers don't run as expected or ATAPI is used. The + * recommended fix is to reset the engine each use using a chip + * test register. + */ + +static void sl82c105_reset_engine(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 val; + + pci_read_config_word(pdev, 0x7E, &val); + pci_write_config_word(pdev, 0x7E, val | 4); + pci_write_config_word(pdev, 0x7E, val & ~4); +} + +/** + * sl82c105_bmdma_start - DMA engine begin + * @qc: ATA command + * + * Reset the DMA engine each use as recommended by the errata + * document. + * + * FIXME: if we switch clock at BMDMA start/end we might get better + * PIO performance on DMA capable devices. + */ + +static void sl82c105_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + udelay(100); + sl82c105_reset_engine(ap); + udelay(100); + + /* Set the clocks for DMA */ + sl82c105_configure_dmamode(ap, qc->dev); + /* Activate DMA */ + ata_bmdma_start(qc); +} + +/** + * sl82c105_bmdma_end - DMA engine stop + * @qc: ATA command + * + * Reset the DMA engine each use as recommended by the errata + * document. + * + * This function is also called to turn off DMA when a timeout occurs + * during DMA operation. In both cases we need to reset the engine, + * so no actual eng_timeout handler is required. + * + * We assume bmdma_stop is always called if bmdma_start as called. If + * not then we may need to wrap qc_issue. + */ + +static void sl82c105_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + ata_bmdma_stop(qc); + sl82c105_reset_engine(ap); + udelay(100); + + /* This will redo the initial setup of the DMA device to matching + PIO timings */ + sl82c105_set_piomode(ap, qc->dev); +} + +/** + * sl82c105_qc_defer - implement serialization + * @qc: command + * + * We must issue one command per host not per channel because + * of the reset bug. + * + * Q: is the scsi host lock sufficient ? + */ + +static int sl82c105_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_host *host = qc->ap->host; + struct ata_port *alt = host->ports[1 ^ qc->ap->port_no]; + int rc; + + /* First apply the usual rules */ + rc = ata_std_qc_defer(qc); + if (rc != 0) + return rc; + + /* Now apply serialization rules. Only allow a command if the + other channel state machine is idle */ + if (alt && alt->qc_active) + return ATA_DEFER_PORT; + return 0; +} + +static bool sl82c105_sff_irq_check(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 val, mask = ap->port_no ? CTRL_IDE_IRQB : CTRL_IDE_IRQA; + + pci_read_config_dword(pdev, 0x40, &val); + + return val & mask; +} + +static struct scsi_host_template sl82c105_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations sl82c105_port_ops = { + .inherits = &ata_bmdma_port_ops, + .qc_defer = sl82c105_qc_defer, + .bmdma_start = sl82c105_bmdma_start, + .bmdma_stop = sl82c105_bmdma_stop, + .cable_detect = ata_cable_40wire, + .set_piomode = sl82c105_set_piomode, + .prereset = sl82c105_pre_reset, + .sff_irq_check = sl82c105_sff_irq_check, +}; + +/** + * sl82c105_bridge_revision - find bridge version + * @pdev: PCI device for the ATA function + * + * Locates the PCI bridge associated with the ATA function and + * providing it is a Winbond 553 reports the revision. If it cannot + * find a revision or the right device it returns -1 + */ + +static int sl82c105_bridge_revision(struct pci_dev *pdev) +{ + struct pci_dev *bridge; + + /* + * The bridge should be part of the same device, but function 0. + */ + bridge = pci_get_slot(pdev->bus, + PCI_DEVFN(PCI_SLOT(pdev->devfn), 0)); + if (!bridge) + return -1; + + /* + * Make sure it is a Winbond 553 and is an ISA bridge. + */ + if (bridge->vendor != PCI_VENDOR_ID_WINBOND || + bridge->device != PCI_DEVICE_ID_WINBOND_83C553 || + bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA) { + pci_dev_put(bridge); + return -1; + } + /* + * We need to find function 0's revision, not function 1 + */ + pci_dev_put(bridge); + return bridge->revision; +} + +static void sl82c105_fixup(struct pci_dev *pdev) +{ + u32 val; + + pci_read_config_dword(pdev, 0x40, &val); + val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; + pci_write_config_dword(pdev, 0x40, val); +} + +static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static const struct ata_port_info info_dma = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .port_ops = &sl82c105_port_ops + }; + static const struct ata_port_info info_early = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .port_ops = &sl82c105_port_ops + }; + /* for now use only the first port */ + const struct ata_port_info *ppi[] = { &info_early, + NULL }; + int rev; + int rc; + + rc = pcim_enable_device(dev); + if (rc) + return rc; + + rev = sl82c105_bridge_revision(dev); + + if (rev == -1) + dev_warn(&dev->dev, + "pata_sl82c105: Unable to find bridge, disabling DMA\n"); + else if (rev <= 5) + dev_warn(&dev->dev, + "pata_sl82c105: Early bridge revision, no DMA available\n"); + else + ppi[0] = &info_dma; + + sl82c105_fixup(dev); + + return ata_pci_bmdma_init_one(dev, ppi, &sl82c105_sht, NULL, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int sl82c105_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + sl82c105_fixup(pdev); + + ata_host_resume(host); + return 0; +} +#endif + +static const struct pci_device_id sl82c105[] = { + { PCI_VDEVICE(WINBOND, PCI_DEVICE_ID_WINBOND_82C105), }, + + { }, +}; + +static struct pci_driver sl82c105_pci_driver = { + .name = DRV_NAME, + .id_table = sl82c105, + .probe = sl82c105_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = sl82c105_reinit_one, +#endif +}; + +module_pci_driver(sl82c105_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Sl82c105"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sl82c105); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c new file mode 100644 index 000000000..d9364af8e --- /dev/null +++ b/drivers/ata/pata_triflex.c @@ -0,0 +1,248 @@ +/* + * pata_triflex.c - Compaq PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * + * based upon + * + * triflex.c + * + * IDE Chipset driver for the Compaq TriFlex IDE controller. + * + * Known to work with the Compaq Workstation 5x00 series. + * + * Copyright (C) 2002 Hewlett-Packard Development Group, L.P. + * Author: Torben Mathiasen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Loosely based on the piix & svwks drivers. + * + * Documentation: + * Not publicly available. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_triflex" +#define DRV_VERSION "0.2.8" + +/** + * triflex_prereset - probe begin + * @link: ATA link + * @deadline: deadline jiffies for the operation + * + * Set up cable type and use generic probe init + */ + +static int triflex_prereset(struct ata_link *link, unsigned long deadline) +{ + static const struct pci_bits triflex_enable_bits[] = { + { 0x80, 1, 0x01, 0x01 }, + { 0x80, 1, 0x02, 0x02 } + }; + + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no])) + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + + + +/** + * triflex_load_timing - timing configuration + * @ap: ATA interface + * @adev: Device on the bus + * @speed: speed to configure + * + * The Triflex has one set of timings per device per channel. This + * means we must do some switching. As the PIO and DMA timings don't + * match we have to do some reloading unlike PIIX devices where tuning + * tricks can avoid it. + */ + +static void triflex_load_timing(struct ata_port *ap, struct ata_device *adev, int speed) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 timing = 0; + u32 triflex_timing, old_triflex_timing; + int channel_offset = ap->port_no ? 0x74: 0x70; + unsigned int is_slave = (adev->devno != 0); + + + pci_read_config_dword(pdev, channel_offset, &old_triflex_timing); + triflex_timing = old_triflex_timing; + + switch(speed) + { + case XFER_MW_DMA_2: + timing = 0x0103;break; + case XFER_MW_DMA_1: + timing = 0x0203;break; + case XFER_MW_DMA_0: + timing = 0x0808;break; + case XFER_SW_DMA_2: + case XFER_SW_DMA_1: + case XFER_SW_DMA_0: + timing = 0x0F0F;break; + case XFER_PIO_4: + timing = 0x0202;break; + case XFER_PIO_3: + timing = 0x0204;break; + case XFER_PIO_2: + timing = 0x0404;break; + case XFER_PIO_1: + timing = 0x0508;break; + case XFER_PIO_0: + timing = 0x0808;break; + default: + BUG(); + } + triflex_timing &= ~ (0xFFFF << (16 * is_slave)); + triflex_timing |= (timing << (16 * is_slave)); + + if (triflex_timing != old_triflex_timing) + pci_write_config_dword(pdev, channel_offset, triflex_timing); +} + +/** + * triflex_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Use the timing loader to set up the PIO mode. We have to do this + * because DMA start/stop will only be called once DMA occurs. If there + * has been no DMA then the PIO timings are still needed. + */ +static void triflex_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + triflex_load_timing(ap, adev, adev->pio_mode); +} + +/** + * triflex_dma_start - DMA start callback + * @qc: Command in progress + * + * Usually drivers set the DMA timing at the point the set_dmamode call + * is made. Triflex however requires we load new timings on the + * transition or keep matching PIO/DMA pairs (ie MWDMA2/PIO4 etc). + * We load the DMA timings just before starting DMA and then restore + * the PIO timing when the DMA is finished. + */ + +static void triflex_bmdma_start(struct ata_queued_cmd *qc) +{ + triflex_load_timing(qc->ap, qc->dev, qc->dev->dma_mode); + ata_bmdma_start(qc); +} + +/** + * triflex_dma_stop - DMA stop callback + * @ap: ATA interface + * @adev: ATA device + * + * We loaded new timings in dma_start, as a result we need to restore + * the PIO timings in dma_stop so that the next command issue gets the + * right clock values. + */ + +static void triflex_bmdma_stop(struct ata_queued_cmd *qc) +{ + ata_bmdma_stop(qc); + triflex_load_timing(qc->ap, qc->dev, qc->dev->pio_mode); +} + +static struct scsi_host_template triflex_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations triflex_port_ops = { + .inherits = &ata_bmdma_port_ops, + .bmdma_start = triflex_bmdma_start, + .bmdma_stop = triflex_bmdma_stop, + .cable_detect = ata_cable_40wire, + .set_piomode = triflex_set_piomode, + .prereset = triflex_prereset, +}; + +static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .port_ops = &triflex_port_ops + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + + ata_print_version_once(&dev->dev, DRV_VERSION); + + return ata_pci_bmdma_init_one(dev, ppi, &triflex_sht, NULL, 0); +} + +static const struct pci_device_id triflex[] = { + { PCI_VDEVICE(COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE), }, + + { }, +}; + +#ifdef CONFIG_PM_SLEEP +static int triflex_ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc = 0; + + rc = ata_host_suspend(host, mesg); + if (rc) + return rc; + + /* + * We must not disable or powerdown the device. + * APM bios refuses to suspend if IDE is not accessible. + */ + pci_save_state(pdev); + + return 0; +} + +#endif + +static struct pci_driver triflex_pci_driver = { + .name = DRV_NAME, + .id_table = triflex, + .probe = triflex_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = triflex_ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(triflex_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Compaq Triflex"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, triflex); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c new file mode 100644 index 000000000..1ca6bcab3 --- /dev/null +++ b/drivers/ata/pata_via.c @@ -0,0 +1,719 @@ +/* + * pata_via.c - VIA PATA for new ATA layer + * (C) 2005-2006 Red Hat Inc + * + * Documentation + * Most chipset documentation available under NDA only + * + * VIA version guide + * VIA VT82C561 - early design, uses ata_generic currently + * VIA VT82C576 - MWDMA, 33Mhz + * VIA VT82C586 - MWDMA, 33Mhz + * VIA VT82C586a - Added UDMA to 33Mhz + * VIA VT82C586b - UDMA33 + * VIA VT82C596a - Nonfunctional UDMA66 + * VIA VT82C596b - Working UDMA66 + * VIA VT82C686 - Nonfunctional UDMA66 + * VIA VT82C686a - Working UDMA66 + * VIA VT82C686b - Updated to UDMA100 + * VIA VT8231 - UDMA100 + * VIA VT8233 - UDMA100 + * VIA VT8233a - UDMA133 + * VIA VT8233c - UDMA100 + * VIA VT8235 - UDMA133 + * VIA VT8237 - UDMA133 + * VIA VT8237A - UDMA133 + * VIA VT8237S - UDMA133 + * VIA VT8251 - UDMA133 + * + * Most registers remain compatible across chips. Others start reserved + * and acquire sensible semantics if set to 1 (eg cable detect). A few + * exceptions exist, notably around the FIFO settings. + * + * One additional quirk of the VIA design is that like ALi they use few + * PCI IDs for a lot of chips. + * + * Based heavily on: + * + * Version 3.38 + * + * VIA IDE driver for Linux. Supported southbridges: + * + * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b, + * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a, + * vt8235, vt8237 + * + * Copyright (c) 2000-2002 Vojtech Pavlik + * + * Based on the work of: + * Michel Aubry + * Jeff Garzik + * Andre Hedrick + + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_via" +#define DRV_VERSION "0.3.4" + +enum { + VIA_BAD_PREQ = 0x01, /* Crashes if PREQ# till DDACK# set */ + VIA_BAD_CLK66 = 0x02, /* 66 MHz clock doesn't work correctly */ + VIA_SET_FIFO = 0x04, /* Needs to have FIFO split set */ + VIA_NO_UNMASK = 0x08, /* Doesn't work with IRQ unmasking on */ + VIA_BAD_ID = 0x10, /* Has wrong vendor ID (0x1107) */ + VIA_BAD_AST = 0x20, /* Don't touch Address Setup Timing */ + VIA_NO_ENABLES = 0x40, /* Has no enablebits */ + VIA_SATA_PATA = 0x80, /* SATA/PATA combined configuration */ +}; + +enum { + VIA_IDFLAG_SINGLE = (1 << 0), /* single channel controller) */ +}; + +/* + * VIA SouthBridge chips. + */ + +static const struct via_isa_bridge { + const char *name; + u16 id; + u8 rev_min; + u8 rev_max; + u8 udma_mask; + u8 flags; +} via_isa_bridges[] = { + { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, + { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, + { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, + { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_NO_ENABLES }, + { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST | VIA_NO_ENABLES }, + { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, }, + { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, }, + { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, }, + { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, }, + { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, }, + { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 }, + { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, }, + { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO }, + { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO }, + { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO }, + { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK }, + { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, + { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { NULL } +}; + +static const struct dmi_system_id no_atapi_dma_dmi_table[] = { + { + .ident = "AVERATEC 3200", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "AVERATEC"), + DMI_MATCH(DMI_BOARD_NAME, "3200"), + }, + }, + { } +}; + +struct via_port { + u8 cached_device; +}; + +/* + * Cable special cases + */ + +static const struct dmi_system_id cable_dmi_table[] = { + { + .ident = "Acer Ferrari 3400", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."), + DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"), + }, + }, + { } +}; + +static int via_cable_override(struct pci_dev *pdev) +{ + /* Systems by DMI */ + if (dmi_check_system(cable_dmi_table)) + return 1; + /* Arima W730-K8/Targa Visionary 811/... */ + if (pdev->subsystem_vendor == 0x161F && pdev->subsystem_device == 0x2032) + return 1; + return 0; +} + + +/** + * via_cable_detect - cable detection + * @ap: ATA port + * + * Perform cable detection. Actually for the VIA case the BIOS + * already did this for us. We read the values provided by the + * BIOS. If you are using an 8235 in a non-PC configuration you + * may need to update this code. + * + * Hotplug also impacts on this. + */ + +static int via_cable_detect(struct ata_port *ap) { + const struct via_isa_bridge *config = ap->host->private_data; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 ata66; + + if (via_cable_override(pdev)) + return ATA_CBL_PATA40_SHORT; + + if ((config->flags & VIA_SATA_PATA) && ap->port_no == 0) + return ATA_CBL_SATA; + + /* Early chips are 40 wire */ + if (config->udma_mask < ATA_UDMA4) + return ATA_CBL_PATA40; + /* UDMA 66 chips have only drive side logic */ + else if (config->udma_mask < ATA_UDMA5) + return ATA_CBL_PATA_UNK; + /* UDMA 100 or later */ + pci_read_config_dword(pdev, 0x50, &ata66); + /* Check both the drive cable reporting bits, we might not have + two drives */ + if (ata66 & (0x10100000 >> (16 * ap->port_no))) + return ATA_CBL_PATA80; + /* Check with ACPI so we can spot BIOS reported SATA bridges */ + if (ata_acpi_init_gtm(ap) && + ata_acpi_cbl_80wire(ap, ata_acpi_init_gtm(ap))) + return ATA_CBL_PATA80; + return ATA_CBL_PATA40; +} + +static int via_pre_reset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + const struct via_isa_bridge *config = ap->host->private_data; + + if (!(config->flags & VIA_NO_ENABLES)) { + static const struct pci_bits via_enable_bits[] = { + { 0x40, 1, 0x02, 0x02 }, + { 0x40, 1, 0x01, 0x01 } + }; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no])) + return -ENOENT; + } + + return ata_sff_prereset(link, deadline); +} + + +/** + * via_do_set_mode - set transfer mode data + * @ap: ATA interface + * @adev: ATA device + * @mode: ATA mode being programmed + * @set_ast: Set to program address setup + * @udma_type: UDMA mode/format of registers + * + * Program the VIA registers for DMA and PIO modes. Uses the ata timing + * support in order to compute modes. + * + * FIXME: Hotplug will require we serialize multiple mode changes + * on the two channels. + */ + +static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, + int mode, int set_ast, int udma_type) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_device *peer = ata_dev_pair(adev); + struct ata_timing t, p; + static int via_clock = 33333; /* Bus clock in kHZ */ + unsigned long T = 1000000000 / via_clock; + unsigned long UT = T; + int ut; + int offset = 3 - (2*ap->port_no) - adev->devno; + + switch (udma_type) { + case ATA_UDMA4: + UT = T / 2; break; + case ATA_UDMA5: + UT = T / 3; break; + case ATA_UDMA6: + UT = T / 4; break; + } + + /* Calculate the timing values we require */ + ata_timing_compute(adev, mode, &t, T, UT); + + /* We share 8bit timing so we must merge the constraints */ + if (peer) { + if (peer->pio_mode) { + ata_timing_compute(peer, peer->pio_mode, &p, T, UT); + ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT); + } + } + + /* Address setup is programmable but breaks on UDMA133 setups */ + if (set_ast) { + u8 setup; /* 2 bits per drive */ + int shift = 2 * offset; + + pci_read_config_byte(pdev, 0x4C, &setup); + setup &= ~(3 << shift); + setup |= (clamp_val(t.setup, 1, 4) - 1) << shift; + pci_write_config_byte(pdev, 0x4C, setup); + } + + /* Load the PIO mode bits */ + pci_write_config_byte(pdev, 0x4F - ap->port_no, + ((clamp_val(t.act8b, 1, 16) - 1) << 4) | (clamp_val(t.rec8b, 1, 16) - 1)); + pci_write_config_byte(pdev, 0x48 + offset, + ((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1)); + + /* Load the UDMA bits according to type */ + switch (udma_type) { + case ATA_UDMA2: + default: + ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03; + break; + case ATA_UDMA4: + ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f; + break; + case ATA_UDMA5: + ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; + break; + case ATA_UDMA6: + ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; + break; + } + + /* Set UDMA unless device is not UDMA capable */ + if (udma_type) { + u8 udma_etc; + + pci_read_config_byte(pdev, 0x50 + offset, &udma_etc); + + /* clear transfer mode bit */ + udma_etc &= ~0x20; + + if (t.udma) { + /* preserve 80-wire cable detection bit */ + udma_etc &= 0x10; + udma_etc |= ut; + } + + pci_write_config_byte(pdev, 0x50 + offset, udma_etc); + } +} + +static void via_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + const struct via_isa_bridge *config = ap->host->private_data; + int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; + + via_do_set_mode(ap, adev, adev->pio_mode, set_ast, config->udma_mask); +} + +static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + const struct via_isa_bridge *config = ap->host->private_data; + int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; + + via_do_set_mode(ap, adev, adev->dma_mode, set_ast, config->udma_mask); +} + +/** + * via_mode_filter - filter buggy device/mode pairs + * @dev: ATA device + * @mask: Mode bitmask + * + * We need to apply some minimal filtering for old controllers and at least + * one breed of Transcend SSD. Return the updated mask. + */ + +static unsigned long via_mode_filter(struct ata_device *dev, unsigned long mask) +{ + struct ata_host *host = dev->link->ap->host; + const struct via_isa_bridge *config = host->private_data; + unsigned char model_num[ATA_ID_PROD_LEN + 1]; + + if (config->id == PCI_DEVICE_ID_VIA_82C586_0) { + ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num)); + if (strcmp(model_num, "TS64GSSD25-M") == 0) { + ata_dev_warn(dev, + "disabling UDMA mode due to reported lockups with this device\n"); + mask &= ~ ATA_MASK_UDMA; + } + } + + if (dev->class == ATA_DEV_ATAPI && + dmi_check_system(no_atapi_dma_dmi_table)) { + ata_dev_warn(dev, "controller locks up on ATAPI DMA, forcing PIO\n"); + mask &= ATA_MASK_PIO; + } + + return mask; +} + +/** + * via_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller. + * + * Note: This is to fix the internal bug of via chipsets, which + * will reset the device register after changing the IEN bit on + * ctl register + */ +static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + struct via_port *vp = ap->private_data; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + int newctl = 0; + + if (tf->ctl != ap->last_ctl) { + iowrite8(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + newctl = 1; + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + iowrite8(tf->device, ioaddr->device_addr); + vp->cached_device = tf->device; + } else if (newctl) + iowrite8(vp->cached_device, ioaddr->device_addr); + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + WARN_ON_ONCE(!ioaddr->ctl_addr); + iowrite8(tf->hob_feature, ioaddr->feature_addr); + iowrite8(tf->hob_nsect, ioaddr->nsect_addr); + iowrite8(tf->hob_lbal, ioaddr->lbal_addr); + iowrite8(tf->hob_lbam, ioaddr->lbam_addr); + iowrite8(tf->hob_lbah, ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + + if (is_addr) { + iowrite8(tf->feature, ioaddr->feature_addr); + iowrite8(tf->nsect, ioaddr->nsect_addr); + iowrite8(tf->lbal, ioaddr->lbal_addr); + iowrite8(tf->lbam, ioaddr->lbam_addr); + iowrite8(tf->lbah, ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + + ata_wait_idle(ap); +} + +static int via_port_start(struct ata_port *ap) +{ + struct via_port *vp; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + int ret = ata_bmdma_port_start(ap); + if (ret < 0) + return ret; + + vp = devm_kzalloc(&pdev->dev, sizeof(struct via_port), GFP_KERNEL); + if (vp == NULL) + return -ENOMEM; + ap->private_data = vp; + return 0; +} + +static struct scsi_host_template via_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations via_port_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = via_cable_detect, + .set_piomode = via_set_piomode, + .set_dmamode = via_set_dmamode, + .prereset = via_pre_reset, + .sff_tf_load = via_tf_load, + .port_start = via_port_start, + .mode_filter = via_mode_filter, +}; + +static struct ata_port_operations via_port_ops_noirq = { + .inherits = &via_port_ops, + .sff_data_xfer = ata_sff_data_xfer_noirq, +}; + +/** + * via_config_fifo - set up the FIFO + * @pdev: PCI device + * @flags: configuration flags + * + * Set the FIFO properties for this device if necessary. Used both on + * set up and on and the resume path + */ + +static void via_config_fifo(struct pci_dev *pdev, unsigned int flags) +{ + u8 enable; + + /* 0x40 low bits indicate enabled channels */ + pci_read_config_byte(pdev, 0x40 , &enable); + enable &= 3; + + if (flags & VIA_SET_FIFO) { + static const u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20}; + u8 fifo; + + pci_read_config_byte(pdev, 0x43, &fifo); + + /* Clear PREQ# until DDACK# for errata */ + if (flags & VIA_BAD_PREQ) + fifo &= 0x7F; + else + fifo &= 0x9f; + /* Turn on FIFO for enabled channels */ + fifo |= fifo_setting[enable]; + pci_write_config_byte(pdev, 0x43, fifo); + } +} + +static void via_fixup(struct pci_dev *pdev, const struct via_isa_bridge *config) +{ + u32 timing; + + /* Initialise the FIFO for the enabled channels. */ + via_config_fifo(pdev, config->flags); + + if (config->udma_mask == ATA_UDMA4) { + /* The 66 MHz devices require we enable the clock */ + pci_read_config_dword(pdev, 0x50, &timing); + timing |= 0x80008; + pci_write_config_dword(pdev, 0x50, timing); + } + if (config->flags & VIA_BAD_CLK66) { + /* Disable the 66MHz clock on problem devices */ + pci_read_config_dword(pdev, 0x50, &timing); + timing &= ~0x80008; + pci_write_config_dword(pdev, 0x50, timing); + } +} + +/** + * via_init_one - discovery callback + * @pdev: PCI device + * @id: PCI table info + * + * A VIA IDE interface has been discovered. Figure out what revision + * and perform configuration work before handing it to the ATA layer + */ + +static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + /* Early VIA without UDMA support */ + static const struct ata_port_info via_mwdma_info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .port_ops = &via_port_ops + }; + /* Ditto with IRQ masking required */ + static const struct ata_port_info via_mwdma_info_borked = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .port_ops = &via_port_ops_noirq, + }; + /* VIA UDMA 33 devices (and borked 66) */ + static const struct ata_port_info via_udma33_info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, + .port_ops = &via_port_ops + }; + /* VIA UDMA 66 devices */ + static const struct ata_port_info via_udma66_info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, + .port_ops = &via_port_ops + }; + /* VIA UDMA 100 devices */ + static const struct ata_port_info via_udma100_info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &via_port_ops + }; + /* UDMA133 with bad AST (All current 133) */ + static const struct ata_port_info via_udma133_info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, /* FIXME: should check north bridge */ + .port_ops = &via_port_ops + }; + const struct ata_port_info *ppi[] = { NULL, NULL }; + struct pci_dev *isa; + const struct via_isa_bridge *config; + u8 enable; + unsigned long flags = id->driver_data; + int rc; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + if (flags & VIA_IDFLAG_SINGLE) + ppi[1] = &ata_dummy_port_info; + + /* To find out how the IDE will behave and what features we + actually have to look at the bridge not the IDE controller */ + for (config = via_isa_bridges; config->id != PCI_DEVICE_ID_VIA_ANON; + config++) + if ((isa = pci_get_device(PCI_VENDOR_ID_VIA + + !!(config->flags & VIA_BAD_ID), + config->id, NULL))) { + u8 rev = isa->revision; + pci_dev_put(isa); + + if ((id->device == 0x0415 || id->device == 0x3164) && + (config->id != id->device)) + continue; + + if (rev >= config->rev_min && rev <= config->rev_max) + break; + } + + if (!(config->flags & VIA_NO_ENABLES)) { + /* 0x40 low bits indicate enabled channels */ + pci_read_config_byte(pdev, 0x40 , &enable); + enable &= 3; + if (enable == 0) + return -ENODEV; + } + + /* Clock set up */ + switch (config->udma_mask) { + case 0x00: + if (config->flags & VIA_NO_UNMASK) + ppi[0] = &via_mwdma_info_borked; + else + ppi[0] = &via_mwdma_info; + break; + case ATA_UDMA2: + ppi[0] = &via_udma33_info; + break; + case ATA_UDMA4: + ppi[0] = &via_udma66_info; + break; + case ATA_UDMA5: + ppi[0] = &via_udma100_info; + break; + case ATA_UDMA6: + ppi[0] = &via_udma133_info; + break; + default: + WARN_ON(1); + return -ENODEV; + } + + via_fixup(pdev, config); + + /* We have established the device type, now fire it up */ + return ata_pci_bmdma_init_one(pdev, ppi, &via_sht, (void *)config, 0); +} + +#ifdef CONFIG_PM_SLEEP +/** + * via_reinit_one - reinit after resume + * @pdev; PCI device + * + * Called when the VIA PATA device is resumed. We must then + * reconfigure the fifo and other setup we may have altered. In + * addition the kernel needs to have the resume methods on PCI + * quirk supported. + */ + +static int via_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + via_fixup(pdev, host->private_data); + + ata_host_resume(host); + return 0; +} +#endif + +static const struct pci_device_id via[] = { + { PCI_VDEVICE(VIA, 0x0415), }, + { PCI_VDEVICE(VIA, 0x0571), }, + { PCI_VDEVICE(VIA, 0x0581), }, + { PCI_VDEVICE(VIA, 0x1571), }, + { PCI_VDEVICE(VIA, 0x3164), }, + { PCI_VDEVICE(VIA, 0x5324), }, + { PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE }, + { PCI_VDEVICE(VIA, 0x9001), VIA_IDFLAG_SINGLE }, + + { }, +}; + +static struct pci_driver via_pci_driver = { + .name = DRV_NAME, + .id_table = via, + .probe = via_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = via_reinit_one, +#endif +}; + +module_pci_driver(via_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for VIA PATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, via); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c new file mode 100644 index 000000000..64d682c6e --- /dev/null +++ b/drivers/ata/pdc_adma.c @@ -0,0 +1,668 @@ +/* + * pdc_adma.c - Pacific Digital Corporation ADMA + * + * Maintained by: Tejun Heo + * + * Copyright 2005 Mark Lord + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * + * Supports ATA disks in single-packet ADMA mode. + * Uses PIO for everything else. + * + * TODO: Use ADMA transfers for ATAPI devices, when possible. + * This requires careful attention to a number of quirks of the chip. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pdc_adma" +#define DRV_VERSION "1.0" + +/* macro to calculate base address for ATA regs */ +#define ADMA_ATA_REGS(base, port_no) ((base) + ((port_no) * 0x40)) + +/* macro to calculate base address for ADMA regs */ +#define ADMA_REGS(base, port_no) ((base) + 0x80 + ((port_no) * 0x20)) + +/* macro to obtain addresses from ata_port */ +#define ADMA_PORT_REGS(ap) \ + ADMA_REGS((ap)->host->iomap[ADMA_MMIO_BAR], ap->port_no) + +enum { + ADMA_MMIO_BAR = 4, + + ADMA_PORTS = 2, + ADMA_CPB_BYTES = 40, + ADMA_PRD_BYTES = LIBATA_MAX_PRD * 16, + ADMA_PKT_BYTES = ADMA_CPB_BYTES + ADMA_PRD_BYTES, + + ADMA_DMA_BOUNDARY = 0xffffffff, + + /* global register offsets */ + ADMA_MODE_LOCK = 0x00c7, + + /* per-channel register offsets */ + ADMA_CONTROL = 0x0000, /* ADMA control */ + ADMA_STATUS = 0x0002, /* ADMA status */ + ADMA_CPB_COUNT = 0x0004, /* CPB count */ + ADMA_CPB_CURRENT = 0x000c, /* current CPB address */ + ADMA_CPB_NEXT = 0x000c, /* next CPB address */ + ADMA_CPB_LOOKUP = 0x0010, /* CPB lookup table */ + ADMA_FIFO_IN = 0x0014, /* input FIFO threshold */ + ADMA_FIFO_OUT = 0x0016, /* output FIFO threshold */ + + /* ADMA_CONTROL register bits */ + aNIEN = (1 << 8), /* irq mask: 1==masked */ + aGO = (1 << 7), /* packet trigger ("Go!") */ + aRSTADM = (1 << 5), /* ADMA logic reset */ + aPIOMD4 = 0x0003, /* PIO mode 4 */ + + /* ADMA_STATUS register bits */ + aPSD = (1 << 6), + aUIRQ = (1 << 4), + aPERR = (1 << 0), + + /* CPB bits */ + cDONE = (1 << 0), + cATERR = (1 << 3), + + cVLD = (1 << 0), + cDAT = (1 << 2), + cIEN = (1 << 3), + + /* PRD bits */ + pORD = (1 << 4), + pDIRO = (1 << 5), + pEND = (1 << 7), + + /* ATA register flags */ + rIGN = (1 << 5), + rEND = (1 << 7), + + /* ATA register addresses */ + ADMA_REGS_CONTROL = 0x0e, + ADMA_REGS_SECTOR_COUNT = 0x12, + ADMA_REGS_LBA_LOW = 0x13, + ADMA_REGS_LBA_MID = 0x14, + ADMA_REGS_LBA_HIGH = 0x15, + ADMA_REGS_DEVICE = 0x16, + ADMA_REGS_COMMAND = 0x17, + + /* PCI device IDs */ + board_1841_idx = 0, /* ADMA 2-port controller */ +}; + +typedef enum { adma_state_idle, adma_state_pkt, adma_state_mmio } adma_state_t; + +struct adma_port_priv { + u8 *pkt; + dma_addr_t pkt_dma; + adma_state_t state; +}; + +static int adma_ata_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent); +static int adma_port_start(struct ata_port *ap); +static void adma_port_stop(struct ata_port *ap); +static void adma_qc_prep(struct ata_queued_cmd *qc); +static unsigned int adma_qc_issue(struct ata_queued_cmd *qc); +static int adma_check_atapi_dma(struct ata_queued_cmd *qc); +static void adma_freeze(struct ata_port *ap); +static void adma_thaw(struct ata_port *ap); +static int adma_prereset(struct ata_link *link, unsigned long deadline); + +static struct scsi_host_template adma_ata_sht = { + ATA_BASE_SHT(DRV_NAME), + .sg_tablesize = LIBATA_MAX_PRD, + .dma_boundary = ADMA_DMA_BOUNDARY, +}; + +static struct ata_port_operations adma_ata_ops = { + .inherits = &ata_sff_port_ops, + + .lost_interrupt = ATA_OP_NULL, + + .check_atapi_dma = adma_check_atapi_dma, + .qc_prep = adma_qc_prep, + .qc_issue = adma_qc_issue, + + .freeze = adma_freeze, + .thaw = adma_thaw, + .prereset = adma_prereset, + + .port_start = adma_port_start, + .port_stop = adma_port_stop, +}; + +static struct ata_port_info adma_port_info[] = { + /* board_1841_idx */ + { + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_POLLING, + .pio_mask = ATA_PIO4_ONLY, + .udma_mask = ATA_UDMA4, + .port_ops = &adma_ata_ops, + }, +}; + +static const struct pci_device_id adma_ata_pci_tbl[] = { + { PCI_VDEVICE(PDC, 0x1841), board_1841_idx }, + + { } /* terminate list */ +}; + +static struct pci_driver adma_ata_pci_driver = { + .name = DRV_NAME, + .id_table = adma_ata_pci_tbl, + .probe = adma_ata_init_one, + .remove = ata_pci_remove_one, +}; + +static int adma_check_atapi_dma(struct ata_queued_cmd *qc) +{ + return 1; /* ATAPI DMA not yet supported */ +} + +static void adma_reset_engine(struct ata_port *ap) +{ + void __iomem *chan = ADMA_PORT_REGS(ap); + + /* reset ADMA to idle state */ + writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL); + udelay(2); + writew(aPIOMD4, chan + ADMA_CONTROL); + udelay(2); +} + +static void adma_reinit_engine(struct ata_port *ap) +{ + struct adma_port_priv *pp = ap->private_data; + void __iomem *chan = ADMA_PORT_REGS(ap); + + /* mask/clear ATA interrupts */ + writeb(ATA_NIEN, ap->ioaddr.ctl_addr); + ata_sff_check_status(ap); + + /* reset the ADMA engine */ + adma_reset_engine(ap); + + /* set in-FIFO threshold to 0x100 */ + writew(0x100, chan + ADMA_FIFO_IN); + + /* set CPB pointer */ + writel((u32)pp->pkt_dma, chan + ADMA_CPB_NEXT); + + /* set out-FIFO threshold to 0x100 */ + writew(0x100, chan + ADMA_FIFO_OUT); + + /* set CPB count */ + writew(1, chan + ADMA_CPB_COUNT); + + /* read/discard ADMA status */ + readb(chan + ADMA_STATUS); +} + +static inline void adma_enter_reg_mode(struct ata_port *ap) +{ + void __iomem *chan = ADMA_PORT_REGS(ap); + + writew(aPIOMD4, chan + ADMA_CONTROL); + readb(chan + ADMA_STATUS); /* flush */ +} + +static void adma_freeze(struct ata_port *ap) +{ + void __iomem *chan = ADMA_PORT_REGS(ap); + + /* mask/clear ATA interrupts */ + writeb(ATA_NIEN, ap->ioaddr.ctl_addr); + ata_sff_check_status(ap); + + /* reset ADMA to idle state */ + writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL); + udelay(2); + writew(aPIOMD4 | aNIEN, chan + ADMA_CONTROL); + udelay(2); +} + +static void adma_thaw(struct ata_port *ap) +{ + adma_reinit_engine(ap); +} + +static int adma_prereset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct adma_port_priv *pp = ap->private_data; + + if (pp->state != adma_state_idle) /* healthy paranoia */ + pp->state = adma_state_mmio; + adma_reinit_engine(ap); + + return ata_sff_prereset(link, deadline); +} + +static int adma_fill_sg(struct ata_queued_cmd *qc) +{ + struct scatterlist *sg; + struct ata_port *ap = qc->ap; + struct adma_port_priv *pp = ap->private_data; + u8 *buf = pp->pkt, *last_buf = NULL; + int i = (2 + buf[3]) * 8; + u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0); + unsigned int si; + + for_each_sg(qc->sg, sg, qc->n_elem, si) { + u32 addr; + u32 len; + + addr = (u32)sg_dma_address(sg); + *(__le32 *)(buf + i) = cpu_to_le32(addr); + i += 4; + + len = sg_dma_len(sg) >> 3; + *(__le32 *)(buf + i) = cpu_to_le32(len); + i += 4; + + last_buf = &buf[i]; + buf[i++] = pFLAGS; + buf[i++] = qc->dev->dma_mode & 0xf; + buf[i++] = 0; /* pPKLW */ + buf[i++] = 0; /* reserved */ + + *(__le32 *)(buf + i) = + (pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4); + i += 4; + + VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", i/4, + (unsigned long)addr, len); + } + + if (likely(last_buf)) + *last_buf |= pEND; + + return i; +} + +static void adma_qc_prep(struct ata_queued_cmd *qc) +{ + struct adma_port_priv *pp = qc->ap->private_data; + u8 *buf = pp->pkt; + u32 pkt_dma = (u32)pp->pkt_dma; + int i = 0; + + VPRINTK("ENTER\n"); + + adma_enter_reg_mode(qc->ap); + if (qc->tf.protocol != ATA_PROT_DMA) + return; + + buf[i++] = 0; /* Response flags */ + buf[i++] = 0; /* reserved */ + buf[i++] = cVLD | cDAT | cIEN; + i++; /* cLEN, gets filled in below */ + + *(__le32 *)(buf+i) = cpu_to_le32(pkt_dma); /* cNCPB */ + i += 4; /* cNCPB */ + i += 4; /* cPRD, gets filled in below */ + + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + + /* ATA registers; must be a multiple of 4 */ + buf[i++] = qc->tf.device; + buf[i++] = ADMA_REGS_DEVICE; + if ((qc->tf.flags & ATA_TFLAG_LBA48)) { + buf[i++] = qc->tf.hob_nsect; + buf[i++] = ADMA_REGS_SECTOR_COUNT; + buf[i++] = qc->tf.hob_lbal; + buf[i++] = ADMA_REGS_LBA_LOW; + buf[i++] = qc->tf.hob_lbam; + buf[i++] = ADMA_REGS_LBA_MID; + buf[i++] = qc->tf.hob_lbah; + buf[i++] = ADMA_REGS_LBA_HIGH; + } + buf[i++] = qc->tf.nsect; + buf[i++] = ADMA_REGS_SECTOR_COUNT; + buf[i++] = qc->tf.lbal; + buf[i++] = ADMA_REGS_LBA_LOW; + buf[i++] = qc->tf.lbam; + buf[i++] = ADMA_REGS_LBA_MID; + buf[i++] = qc->tf.lbah; + buf[i++] = ADMA_REGS_LBA_HIGH; + buf[i++] = 0; + buf[i++] = ADMA_REGS_CONTROL; + buf[i++] = rIGN; + buf[i++] = 0; + buf[i++] = qc->tf.command; + buf[i++] = ADMA_REGS_COMMAND | rEND; + + buf[3] = (i >> 3) - 2; /* cLEN */ + *(__le32 *)(buf+8) = cpu_to_le32(pkt_dma + i); /* cPRD */ + + i = adma_fill_sg(qc); + wmb(); /* flush PRDs and pkt to memory */ +#if 0 + /* dump out CPB + PRDs for debug */ + { + int j, len = 0; + static char obuf[2048]; + for (j = 0; j < i; ++j) { + len += sprintf(obuf+len, "%02x ", buf[j]); + if ((j & 7) == 7) { + printk("%s\n", obuf); + len = 0; + } + } + if (len) + printk("%s\n", obuf); + } +#endif +} + +static inline void adma_packet_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *chan = ADMA_PORT_REGS(ap); + + VPRINTK("ENTER, ap %p\n", ap); + + /* fire up the ADMA engine */ + writew(aPIOMD4 | aGO, chan + ADMA_CONTROL); +} + +static unsigned int adma_qc_issue(struct ata_queued_cmd *qc) +{ + struct adma_port_priv *pp = qc->ap->private_data; + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + pp->state = adma_state_pkt; + adma_packet_start(qc); + return 0; + + case ATAPI_PROT_DMA: + BUG(); + break; + + default: + break; + } + + pp->state = adma_state_mmio; + return ata_sff_qc_issue(qc); +} + +static inline unsigned int adma_intr_pkt(struct ata_host *host) +{ + unsigned int handled = 0, port_no; + + for (port_no = 0; port_no < host->n_ports; ++port_no) { + struct ata_port *ap = host->ports[port_no]; + struct adma_port_priv *pp; + struct ata_queued_cmd *qc; + void __iomem *chan = ADMA_PORT_REGS(ap); + u8 status = readb(chan + ADMA_STATUS); + + if (status == 0) + continue; + handled = 1; + adma_enter_reg_mode(ap); + pp = ap->private_data; + if (!pp || pp->state != adma_state_pkt) + continue; + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { + if (status & aPERR) + qc->err_mask |= AC_ERR_HOST_BUS; + else if ((status & (aPSD | aUIRQ))) + qc->err_mask |= AC_ERR_OTHER; + + if (pp->pkt[0] & cATERR) + qc->err_mask |= AC_ERR_DEV; + else if (pp->pkt[0] != cDONE) + qc->err_mask |= AC_ERR_OTHER; + + if (!qc->err_mask) + ata_qc_complete(qc); + else { + struct ata_eh_info *ehi = &ap->link.eh_info; + ata_ehi_clear_desc(ehi); + ata_ehi_push_desc(ehi, + "ADMA-status 0x%02X", status); + ata_ehi_push_desc(ehi, + "pkt[0] 0x%02X", pp->pkt[0]); + + if (qc->err_mask == AC_ERR_DEV) + ata_port_abort(ap); + else + ata_port_freeze(ap); + } + } + } + return handled; +} + +static inline unsigned int adma_intr_mmio(struct ata_host *host) +{ + unsigned int handled = 0, port_no; + + for (port_no = 0; port_no < host->n_ports; ++port_no) { + struct ata_port *ap = host->ports[port_no]; + struct adma_port_priv *pp = ap->private_data; + struct ata_queued_cmd *qc; + + if (!pp || pp->state != adma_state_mmio) + continue; + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { + + /* check main status, clearing INTRQ */ + u8 status = ata_sff_check_status(ap); + if ((status & ATA_BUSY)) + continue; + DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", + ap->print_id, qc->tf.protocol, status); + + /* complete taskfile transaction */ + pp->state = adma_state_idle; + qc->err_mask |= ac_err_mask(status); + if (!qc->err_mask) + ata_qc_complete(qc); + else { + struct ata_eh_info *ehi = &ap->link.eh_info; + ata_ehi_clear_desc(ehi); + ata_ehi_push_desc(ehi, "status 0x%02X", status); + + if (qc->err_mask == AC_ERR_DEV) + ata_port_abort(ap); + else + ata_port_freeze(ap); + } + handled = 1; + } + } + return handled; +} + +static irqreturn_t adma_intr(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + unsigned int handled = 0; + + VPRINTK("ENTER\n"); + + spin_lock(&host->lock); + handled = adma_intr_pkt(host) | adma_intr_mmio(host); + spin_unlock(&host->lock); + + VPRINTK("EXIT\n"); + + return IRQ_RETVAL(handled); +} + +static void adma_ata_setup_port(struct ata_ioports *port, void __iomem *base) +{ + port->cmd_addr = + port->data_addr = base + 0x000; + port->error_addr = + port->feature_addr = base + 0x004; + port->nsect_addr = base + 0x008; + port->lbal_addr = base + 0x00c; + port->lbam_addr = base + 0x010; + port->lbah_addr = base + 0x014; + port->device_addr = base + 0x018; + port->status_addr = + port->command_addr = base + 0x01c; + port->altstatus_addr = + port->ctl_addr = base + 0x038; +} + +static int adma_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct adma_port_priv *pp; + + adma_enter_reg_mode(ap); + pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + pp->pkt = dmam_alloc_coherent(dev, ADMA_PKT_BYTES, &pp->pkt_dma, + GFP_KERNEL); + if (!pp->pkt) + return -ENOMEM; + /* paranoia? */ + if ((pp->pkt_dma & 7) != 0) { + printk(KERN_ERR "bad alignment for pp->pkt_dma: %08x\n", + (u32)pp->pkt_dma); + return -ENOMEM; + } + memset(pp->pkt, 0, ADMA_PKT_BYTES); + ap->private_data = pp; + adma_reinit_engine(ap); + return 0; +} + +static void adma_port_stop(struct ata_port *ap) +{ + adma_reset_engine(ap); +} + +static void adma_host_init(struct ata_host *host, unsigned int chip_id) +{ + unsigned int port_no; + + /* enable/lock aGO operation */ + writeb(7, host->iomap[ADMA_MMIO_BAR] + ADMA_MODE_LOCK); + + /* reset the ADMA logic */ + for (port_no = 0; port_no < ADMA_PORTS; ++port_no) + adma_reset_engine(host->ports[port_no]); +} + +static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base) +{ + int rc; + + rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, "32-bit DMA enable failed\n"); + return rc; + } + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n"); + return rc; + } + return 0; +} + +static int adma_ata_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + unsigned int board_idx = (unsigned int) ent->driver_data; + const struct ata_port_info *ppi[] = { &adma_port_info[board_idx], NULL }; + struct ata_host *host; + void __iomem *mmio_base; + int rc, port_no; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* alloc host */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, ADMA_PORTS); + if (!host) + return -ENOMEM; + + /* acquire resources and fill host */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) + return -ENODEV; + + rc = pcim_iomap_regions(pdev, 1 << ADMA_MMIO_BAR, DRV_NAME); + if (rc) + return rc; + host->iomap = pcim_iomap_table(pdev); + mmio_base = host->iomap[ADMA_MMIO_BAR]; + + rc = adma_set_dma_masks(pdev, mmio_base); + if (rc) + return rc; + + for (port_no = 0; port_no < ADMA_PORTS; ++port_no) { + struct ata_port *ap = host->ports[port_no]; + void __iomem *port_base = ADMA_ATA_REGS(mmio_base, port_no); + unsigned int offset = port_base - mmio_base; + + adma_ata_setup_port(&ap->ioaddr, port_base); + + ata_port_pbar_desc(ap, ADMA_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, ADMA_MMIO_BAR, offset, "port"); + } + + /* initialize adapter */ + adma_host_init(host, board_idx); + + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, adma_intr, IRQF_SHARED, + &adma_ata_sht); +} + +module_pci_driver(adma_ata_pci_driver); + +MODULE_AUTHOR("Mark Lord"); +MODULE_DESCRIPTION("Pacific Digital Corporation ADMA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, adma_ata_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c new file mode 100644 index 000000000..902034991 --- /dev/null +++ b/drivers/ata/sata_dwc_460ex.c @@ -0,0 +1,1325 @@ +/* + * drivers/ata/sata_dwc_460ex.c + * + * Synopsys DesignWare Cores (DWC) SATA host driver + * + * Author: Mark Miesfeld + * + * Ported from 2.6.19.2 to 2.6.25/26 by Stefan Roese + * Copyright 2008 DENX Software Engineering + * + * Based on versions provided by AMCC and Synopsys which are: + * Copyright 2006 Applied Micro Circuits Corporation + * COPYRIGHT (C) 2005 SYNOPSYS, INC. ALL RIGHTS RESERVED + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifdef CONFIG_SATA_DWC_DEBUG +#define DEBUG +#endif + +#ifdef CONFIG_SATA_DWC_VDEBUG +#define VERBOSE_DEBUG +#define DEBUG_NCQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "libata.h" + +#include +#include + +/* Supported DMA engine drivers */ +#include +#include + +/* These two are defined in "libata.h" */ +#undef DRV_NAME +#undef DRV_VERSION + +#define DRV_NAME "sata-dwc" +#define DRV_VERSION "1.3" + +#ifndef out_le32 +#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (void __iomem *)(a)) +#endif + +#ifndef in_le32 +#define in_le32(a) __le32_to_cpu(__raw_readl((void __iomem *)(a))) +#endif + +#ifndef NO_IRQ +#define NO_IRQ 0 +#endif + +#define AHB_DMA_BRST_DFLT 64 /* 16 data items burst length*/ + +enum { + SATA_DWC_MAX_PORTS = 1, + + SATA_DWC_SCR_OFFSET = 0x24, + SATA_DWC_REG_OFFSET = 0x64, +}; + +/* DWC SATA Registers */ +struct sata_dwc_regs { + u32 fptagr; /* 1st party DMA tag */ + u32 fpbor; /* 1st party DMA buffer offset */ + u32 fptcr; /* 1st party DMA Xfr count */ + u32 dmacr; /* DMA Control */ + u32 dbtsr; /* DMA Burst Transac size */ + u32 intpr; /* Interrupt Pending */ + u32 intmr; /* Interrupt Mask */ + u32 errmr; /* Error Mask */ + u32 llcr; /* Link Layer Control */ + u32 phycr; /* PHY Control */ + u32 physr; /* PHY Status */ + u32 rxbistpd; /* Recvd BIST pattern def register */ + u32 rxbistpd1; /* Recvd BIST data dword1 */ + u32 rxbistpd2; /* Recvd BIST pattern data dword2 */ + u32 txbistpd; /* Trans BIST pattern def register */ + u32 txbistpd1; /* Trans BIST data dword1 */ + u32 txbistpd2; /* Trans BIST data dword2 */ + u32 bistcr; /* BIST Control Register */ + u32 bistfctr; /* BIST FIS Count Register */ + u32 bistsr; /* BIST Status Register */ + u32 bistdecr; /* BIST Dword Error count register */ + u32 res[15]; /* Reserved locations */ + u32 testr; /* Test Register */ + u32 versionr; /* Version Register */ + u32 idr; /* ID Register */ + u32 unimpl[192]; /* Unimplemented */ + u32 dmadr[256]; /* FIFO Locations in DMA Mode */ +}; + +enum { + SCR_SCONTROL_DET_ENABLE = 0x00000001, + SCR_SSTATUS_DET_PRESENT = 0x00000001, + SCR_SERROR_DIAG_X = 0x04000000, +/* DWC SATA Register Operations */ + SATA_DWC_TXFIFO_DEPTH = 0x01FF, + SATA_DWC_RXFIFO_DEPTH = 0x01FF, + SATA_DWC_DMACR_TMOD_TXCHEN = 0x00000004, + SATA_DWC_DMACR_TXCHEN = (0x00000001 | SATA_DWC_DMACR_TMOD_TXCHEN), + SATA_DWC_DMACR_RXCHEN = (0x00000002 | SATA_DWC_DMACR_TMOD_TXCHEN), + SATA_DWC_DMACR_TXRXCH_CLEAR = SATA_DWC_DMACR_TMOD_TXCHEN, + SATA_DWC_INTPR_DMAT = 0x00000001, + SATA_DWC_INTPR_NEWFP = 0x00000002, + SATA_DWC_INTPR_PMABRT = 0x00000004, + SATA_DWC_INTPR_ERR = 0x00000008, + SATA_DWC_INTPR_NEWBIST = 0x00000010, + SATA_DWC_INTPR_IPF = 0x10000000, + SATA_DWC_INTMR_DMATM = 0x00000001, + SATA_DWC_INTMR_NEWFPM = 0x00000002, + SATA_DWC_INTMR_PMABRTM = 0x00000004, + SATA_DWC_INTMR_ERRM = 0x00000008, + SATA_DWC_INTMR_NEWBISTM = 0x00000010, + SATA_DWC_LLCR_SCRAMEN = 0x00000001, + SATA_DWC_LLCR_DESCRAMEN = 0x00000002, + SATA_DWC_LLCR_RPDEN = 0x00000004, +/* This is all error bits, zero's are reserved fields. */ + SATA_DWC_SERROR_ERR_BITS = 0x0FFF0F03 +}; + +#define SATA_DWC_SCR0_SPD_GET(v) (((v) >> 4) & 0x0000000F) +#define SATA_DWC_DMACR_TX_CLEAR(v) (((v) & ~SATA_DWC_DMACR_TXCHEN) |\ + SATA_DWC_DMACR_TMOD_TXCHEN) +#define SATA_DWC_DMACR_RX_CLEAR(v) (((v) & ~SATA_DWC_DMACR_RXCHEN) |\ + SATA_DWC_DMACR_TMOD_TXCHEN) +#define SATA_DWC_DBTSR_MWR(size) (((size)/4) & SATA_DWC_TXFIFO_DEPTH) +#define SATA_DWC_DBTSR_MRD(size) ((((size)/4) & SATA_DWC_RXFIFO_DEPTH)\ + << 16) +struct sata_dwc_device { + struct device *dev; /* generic device struct */ + struct ata_probe_ent *pe; /* ptr to probe-ent */ + struct ata_host *host; + u8 __iomem *reg_base; + struct sata_dwc_regs *sata_dwc_regs; /* DW Synopsys SATA specific */ + struct dw_dma_chip *dma; +}; + +#define SATA_DWC_QCMD_MAX 32 + +struct sata_dwc_device_port { + struct sata_dwc_device *hsdev; + int cmd_issued[SATA_DWC_QCMD_MAX]; + int dma_pending[SATA_DWC_QCMD_MAX]; + + /* DMA info */ + struct dw_dma_slave *dws; + struct dma_chan *chan; + struct dma_async_tx_descriptor *desc[SATA_DWC_QCMD_MAX]; + u32 dma_interrupt_count; +}; + +/* + * Commonly used DWC SATA driver Macros + */ +#define HSDEV_FROM_HOST(host) ((struct sata_dwc_device *)\ + (host)->private_data) +#define HSDEV_FROM_AP(ap) ((struct sata_dwc_device *)\ + (ap)->host->private_data) +#define HSDEVP_FROM_AP(ap) ((struct sata_dwc_device_port *)\ + (ap)->private_data) +#define HSDEV_FROM_QC(qc) ((struct sata_dwc_device *)\ + (qc)->ap->host->private_data) +#define HSDEV_FROM_HSDEVP(p) ((struct sata_dwc_device *)\ + (hsdevp)->hsdev) + +enum { + SATA_DWC_CMD_ISSUED_NOT = 0, + SATA_DWC_CMD_ISSUED_PEND = 1, + SATA_DWC_CMD_ISSUED_EXEC = 2, + SATA_DWC_CMD_ISSUED_NODATA = 3, + + SATA_DWC_DMA_PENDING_NONE = 0, + SATA_DWC_DMA_PENDING_TX = 1, + SATA_DWC_DMA_PENDING_RX = 2, +}; + +struct sata_dwc_host_priv { + void __iomem *scr_addr_sstatus; + u32 sata_dwc_sactive_issued ; + u32 sata_dwc_sactive_queued ; +}; + +static struct sata_dwc_host_priv host_pvt; + +static struct dw_dma_slave sata_dwc_dma_dws = { + .src_id = 0, + .dst_id = 0, + .src_master = 0, + .dst_master = 1, +}; + +/* + * Prototypes + */ +static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag); +static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc, + u32 check_status); +static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status); +static void sata_dwc_port_stop(struct ata_port *ap); +static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag); + +static const char *get_prot_descript(u8 protocol) +{ + switch ((enum ata_tf_protocols)protocol) { + case ATA_PROT_NODATA: + return "ATA no data"; + case ATA_PROT_PIO: + return "ATA PIO"; + case ATA_PROT_DMA: + return "ATA DMA"; + case ATA_PROT_NCQ: + return "ATA NCQ"; + case ATAPI_PROT_NODATA: + return "ATAPI no data"; + case ATAPI_PROT_PIO: + return "ATAPI PIO"; + case ATAPI_PROT_DMA: + return "ATAPI DMA"; + default: + return "unknown"; + } +} + +static const char *get_dma_dir_descript(int dma_dir) +{ + switch ((enum dma_data_direction)dma_dir) { + case DMA_BIDIRECTIONAL: + return "bidirectional"; + case DMA_TO_DEVICE: + return "to device"; + case DMA_FROM_DEVICE: + return "from device"; + default: + return "none"; + } +} + +static void sata_dwc_tf_dump(struct ata_port *ap, struct ata_taskfile *tf) +{ + dev_vdbg(ap->dev, + "taskfile cmd: 0x%02x protocol: %s flags: 0x%lx device: %x\n", + tf->command, get_prot_descript(tf->protocol), tf->flags, + tf->device); + dev_vdbg(ap->dev, + "feature: 0x%02x nsect: 0x%x lbal: 0x%x lbam: 0x%x lbah: 0x%x\n", + tf->feature, tf->nsect, tf->lbal, tf->lbam, tf->lbah); + dev_vdbg(ap->dev, + "hob_feature: 0x%02x hob_nsect: 0x%x hob_lbal: 0x%x hob_lbam: 0x%x hob_lbah: 0x%x\n", + tf->hob_feature, tf->hob_nsect, tf->hob_lbal, tf->hob_lbam, + tf->hob_lbah); +} + +static void dma_dwc_xfer_done(void *hsdev_instance) +{ + unsigned long flags; + struct sata_dwc_device *hsdev = hsdev_instance; + struct ata_host *host = (struct ata_host *)hsdev->host; + struct ata_port *ap; + struct sata_dwc_device_port *hsdevp; + u8 tag = 0; + unsigned int port = 0; + + spin_lock_irqsave(&host->lock, flags); + ap = host->ports[port]; + hsdevp = HSDEVP_FROM_AP(ap); + tag = ap->link.active_tag; + + /* + * Each DMA command produces 2 interrupts. Only + * complete the command after both interrupts have been + * seen. (See sata_dwc_isr()) + */ + hsdevp->dma_interrupt_count++; + sata_dwc_clear_dmacr(hsdevp, tag); + + if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) { + dev_err(ap->dev, "DMA not pending tag=0x%02x pending=%d\n", + tag, hsdevp->dma_pending[tag]); + } + + if ((hsdevp->dma_interrupt_count % 2) == 0) + sata_dwc_dma_xfer_complete(ap, 1); + + spin_unlock_irqrestore(&host->lock, flags); +} + +static struct dma_async_tx_descriptor *dma_dwc_xfer_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap); + dma_addr_t addr = (dma_addr_t)&hsdev->sata_dwc_regs->dmadr; + struct dma_slave_config sconf; + struct dma_async_tx_descriptor *desc; + + if (qc->dma_dir == DMA_DEV_TO_MEM) { + sconf.src_addr = addr; + sconf.device_fc = true; + } else { /* DMA_MEM_TO_DEV */ + sconf.dst_addr = addr; + sconf.device_fc = false; + } + + sconf.direction = qc->dma_dir; + sconf.src_maxburst = AHB_DMA_BRST_DFLT; + sconf.dst_maxburst = AHB_DMA_BRST_DFLT; + sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + + dmaengine_slave_config(hsdevp->chan, &sconf); + + /* Convert SG list to linked list of items (LLIs) for AHB DMA */ + desc = dmaengine_prep_slave_sg(hsdevp->chan, qc->sg, qc->n_elem, + qc->dma_dir, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + + if (!desc) + return NULL; + + desc->callback = dma_dwc_xfer_done; + desc->callback_param = hsdev; + + dev_dbg(hsdev->dev, "%s sg: 0x%p, count: %d addr: %pad\n", + __func__, qc->sg, qc->n_elem, &addr); + + return desc; +} + +static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val) +{ + if (scr > SCR_NOTIFICATION) { + dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n", + __func__, scr); + return -EINVAL; + } + + *val = in_le32(link->ap->ioaddr.scr_addr + (scr * 4)); + dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n", + __func__, link->ap->print_id, scr, *val); + + return 0; +} + +static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val) +{ + dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n", + __func__, link->ap->print_id, scr, val); + if (scr > SCR_NOTIFICATION) { + dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n", + __func__, scr); + return -EINVAL; + } + out_le32(link->ap->ioaddr.scr_addr + (scr * 4), val); + + return 0; +} + +static u32 core_scr_read(unsigned int scr) +{ + return in_le32(host_pvt.scr_addr_sstatus + (scr * 4)); +} + +static void core_scr_write(unsigned int scr, u32 val) +{ + out_le32(host_pvt.scr_addr_sstatus + (scr * 4), val); +} + +static void clear_serror(void) +{ + u32 val; + val = core_scr_read(SCR_ERROR); + core_scr_write(SCR_ERROR, val); +} + +static void clear_interrupt_bit(struct sata_dwc_device *hsdev, u32 bit) +{ + out_le32(&hsdev->sata_dwc_regs->intpr, + in_le32(&hsdev->sata_dwc_regs->intpr)); +} + +static u32 qcmd_tag_to_mask(u8 tag) +{ + return 0x00000001 << (tag & 0x1f); +} + +/* See ahci.c */ +static void sata_dwc_error_intr(struct ata_port *ap, + struct sata_dwc_device *hsdev, uint intpr) +{ + struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + struct ata_eh_info *ehi = &ap->link.eh_info; + unsigned int err_mask = 0, action = 0; + struct ata_queued_cmd *qc; + u32 serror; + u8 status, tag; + + ata_ehi_clear_desc(ehi); + + serror = core_scr_read(SCR_ERROR); + status = ap->ops->sff_check_status(ap); + + tag = ap->link.active_tag; + + dev_err(ap->dev, + "%s SCR_ERROR=0x%08x intpr=0x%08x status=0x%08x dma_intp=%d pending=%d issued=%d", + __func__, serror, intpr, status, hsdevp->dma_interrupt_count, + hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag]); + + /* Clear error register and interrupt bit */ + clear_serror(); + clear_interrupt_bit(hsdev, SATA_DWC_INTPR_ERR); + + /* This is the only error happening now. TODO check for exact error */ + + err_mask |= AC_ERR_HOST_BUS; + action |= ATA_EH_RESET; + + /* Pass this on to EH */ + ehi->serror |= serror; + ehi->action |= action; + + qc = ata_qc_from_tag(ap, tag); + if (qc) + qc->err_mask |= err_mask; + else + ehi->err_mask |= err_mask; + + ata_port_abort(ap); +} + +/* + * Function : sata_dwc_isr + * arguments : irq, void *dev_instance, struct pt_regs *regs + * Return value : irqreturn_t - status of IRQ + * This Interrupt handler called via port ops registered function. + * .irq_handler = sata_dwc_isr + */ +static irqreturn_t sata_dwc_isr(int irq, void *dev_instance) +{ + struct ata_host *host = (struct ata_host *)dev_instance; + struct sata_dwc_device *hsdev = HSDEV_FROM_HOST(host); + struct ata_port *ap; + struct ata_queued_cmd *qc; + unsigned long flags; + u8 status, tag; + int handled, num_processed, port = 0; + uint intpr, sactive, sactive2, tag_mask; + struct sata_dwc_device_port *hsdevp; + host_pvt.sata_dwc_sactive_issued = 0; + + spin_lock_irqsave(&host->lock, flags); + + /* Read the interrupt register */ + intpr = in_le32(&hsdev->sata_dwc_regs->intpr); + + ap = host->ports[port]; + hsdevp = HSDEVP_FROM_AP(ap); + + dev_dbg(ap->dev, "%s intpr=0x%08x active_tag=%d\n", __func__, intpr, + ap->link.active_tag); + + /* Check for error interrupt */ + if (intpr & SATA_DWC_INTPR_ERR) { + sata_dwc_error_intr(ap, hsdev, intpr); + handled = 1; + goto DONE; + } + + /* Check for DMA SETUP FIS (FP DMA) interrupt */ + if (intpr & SATA_DWC_INTPR_NEWFP) { + clear_interrupt_bit(hsdev, SATA_DWC_INTPR_NEWFP); + + tag = (u8)(in_le32(&hsdev->sata_dwc_regs->fptagr)); + dev_dbg(ap->dev, "%s: NEWFP tag=%d\n", __func__, tag); + if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_PEND) + dev_warn(ap->dev, "CMD tag=%d not pending?\n", tag); + + host_pvt.sata_dwc_sactive_issued |= qcmd_tag_to_mask(tag); + + qc = ata_qc_from_tag(ap, tag); + /* + * Start FP DMA for NCQ command. At this point the tag is the + * active tag. It is the tag that matches the command about to + * be completed. + */ + qc->ap->link.active_tag = tag; + sata_dwc_bmdma_start_by_tag(qc, tag); + + handled = 1; + goto DONE; + } + sactive = core_scr_read(SCR_ACTIVE); + tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive; + + /* If no sactive issued and tag_mask is zero then this is not NCQ */ + if (host_pvt.sata_dwc_sactive_issued == 0 && tag_mask == 0) { + if (ap->link.active_tag == ATA_TAG_POISON) + tag = 0; + else + tag = ap->link.active_tag; + qc = ata_qc_from_tag(ap, tag); + + /* DEV interrupt w/ no active qc? */ + if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { + dev_err(ap->dev, + "%s interrupt with no active qc qc=%p\n", + __func__, qc); + ap->ops->sff_check_status(ap); + handled = 1; + goto DONE; + } + status = ap->ops->sff_check_status(ap); + + qc->ap->link.active_tag = tag; + hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT; + + if (status & ATA_ERR) { + dev_dbg(ap->dev, "interrupt ATA_ERR (0x%x)\n", status); + sata_dwc_qc_complete(ap, qc, 1); + handled = 1; + goto DONE; + } + + dev_dbg(ap->dev, "%s non-NCQ cmd interrupt, protocol: %s\n", + __func__, get_prot_descript(qc->tf.protocol)); +DRVSTILLBUSY: + if (ata_is_dma(qc->tf.protocol)) { + /* + * Each DMA transaction produces 2 interrupts. The DMAC + * transfer complete interrupt and the SATA controller + * operation done interrupt. The command should be + * completed only after both interrupts are seen. + */ + hsdevp->dma_interrupt_count++; + if (hsdevp->dma_pending[tag] == \ + SATA_DWC_DMA_PENDING_NONE) { + dev_err(ap->dev, + "%s: DMA not pending intpr=0x%08x status=0x%08x pending=%d\n", + __func__, intpr, status, + hsdevp->dma_pending[tag]); + } + + if ((hsdevp->dma_interrupt_count % 2) == 0) + sata_dwc_dma_xfer_complete(ap, 1); + } else if (ata_is_pio(qc->tf.protocol)) { + ata_sff_hsm_move(ap, qc, status, 0); + handled = 1; + goto DONE; + } else { + if (unlikely(sata_dwc_qc_complete(ap, qc, 1))) + goto DRVSTILLBUSY; + } + + handled = 1; + goto DONE; + } + + /* + * This is a NCQ command. At this point we need to figure out for which + * tags we have gotten a completion interrupt. One interrupt may serve + * as completion for more than one operation when commands are queued + * (NCQ). We need to process each completed command. + */ + + /* process completed commands */ + sactive = core_scr_read(SCR_ACTIVE); + tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive; + + if (sactive != 0 || (host_pvt.sata_dwc_sactive_issued) > 1 || \ + tag_mask > 1) { + dev_dbg(ap->dev, + "%s NCQ:sactive=0x%08x sactive_issued=0x%08x tag_mask=0x%08x\n", + __func__, sactive, host_pvt.sata_dwc_sactive_issued, + tag_mask); + } + + if ((tag_mask | (host_pvt.sata_dwc_sactive_issued)) != \ + (host_pvt.sata_dwc_sactive_issued)) { + dev_warn(ap->dev, + "Bad tag mask? sactive=0x%08x (host_pvt.sata_dwc_sactive_issued)=0x%08x tag_mask=0x%08x\n", + sactive, host_pvt.sata_dwc_sactive_issued, tag_mask); + } + + /* read just to clear ... not bad if currently still busy */ + status = ap->ops->sff_check_status(ap); + dev_dbg(ap->dev, "%s ATA status register=0x%x\n", __func__, status); + + tag = 0; + num_processed = 0; + while (tag_mask) { + num_processed++; + while (!(tag_mask & 0x00000001)) { + tag++; + tag_mask <<= 1; + } + + tag_mask &= (~0x00000001); + qc = ata_qc_from_tag(ap, tag); + + /* To be picked up by completion functions */ + qc->ap->link.active_tag = tag; + hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT; + + /* Let libata/scsi layers handle error */ + if (status & ATA_ERR) { + dev_dbg(ap->dev, "%s ATA_ERR (0x%x)\n", __func__, + status); + sata_dwc_qc_complete(ap, qc, 1); + handled = 1; + goto DONE; + } + + /* Process completed command */ + dev_dbg(ap->dev, "%s NCQ command, protocol: %s\n", __func__, + get_prot_descript(qc->tf.protocol)); + if (ata_is_dma(qc->tf.protocol)) { + hsdevp->dma_interrupt_count++; + if (hsdevp->dma_pending[tag] == \ + SATA_DWC_DMA_PENDING_NONE) + dev_warn(ap->dev, "%s: DMA not pending?\n", + __func__); + if ((hsdevp->dma_interrupt_count % 2) == 0) + sata_dwc_dma_xfer_complete(ap, 1); + } else { + if (unlikely(sata_dwc_qc_complete(ap, qc, 1))) + goto STILLBUSY; + } + continue; + +STILLBUSY: + ap->stats.idle_irq++; + dev_warn(ap->dev, "STILL BUSY IRQ ata%d: irq trap\n", + ap->print_id); + } /* while tag_mask */ + + /* + * Check to see if any commands completed while we were processing our + * initial set of completed commands (read status clears interrupts, + * so we might miss a completed command interrupt if one came in while + * we were processing --we read status as part of processing a completed + * command). + */ + sactive2 = core_scr_read(SCR_ACTIVE); + if (sactive2 != sactive) { + dev_dbg(ap->dev, + "More completed - sactive=0x%x sactive2=0x%x\n", + sactive, sactive2); + } + handled = 1; + +DONE: + spin_unlock_irqrestore(&host->lock, flags); + return IRQ_RETVAL(handled); +} + +static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag) +{ + struct sata_dwc_device *hsdev = HSDEV_FROM_HSDEVP(hsdevp); + + if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) { + out_le32(&(hsdev->sata_dwc_regs->dmacr), + SATA_DWC_DMACR_RX_CLEAR( + in_le32(&(hsdev->sata_dwc_regs->dmacr)))); + } else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) { + out_le32(&(hsdev->sata_dwc_regs->dmacr), + SATA_DWC_DMACR_TX_CLEAR( + in_le32(&(hsdev->sata_dwc_regs->dmacr)))); + } else { + /* + * This should not happen, it indicates the driver is out of + * sync. If it does happen, clear dmacr anyway. + */ + dev_err(hsdev->dev, + "%s DMA protocol RX and TX DMA not pending tag=0x%02x pending=%d dmacr: 0x%08x\n", + __func__, tag, hsdevp->dma_pending[tag], + in_le32(&hsdev->sata_dwc_regs->dmacr)); + out_le32(&(hsdev->sata_dwc_regs->dmacr), + SATA_DWC_DMACR_TXRXCH_CLEAR); + } +} + +static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status) +{ + struct ata_queued_cmd *qc; + struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap); + u8 tag = 0; + + tag = ap->link.active_tag; + qc = ata_qc_from_tag(ap, tag); + if (!qc) { + dev_err(ap->dev, "failed to get qc"); + return; + } + +#ifdef DEBUG_NCQ + if (tag > 0) { + dev_info(ap->dev, + "%s tag=%u cmd=0x%02x dma dir=%s proto=%s dmacr=0x%08x\n", + __func__, qc->tag, qc->tf.command, + get_dma_dir_descript(qc->dma_dir), + get_prot_descript(qc->tf.protocol), + in_le32(&(hsdev->sata_dwc_regs->dmacr))); + } +#endif + + if (ata_is_dma(qc->tf.protocol)) { + if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) { + dev_err(ap->dev, + "%s DMA protocol RX and TX DMA not pending dmacr: 0x%08x\n", + __func__, + in_le32(&(hsdev->sata_dwc_regs->dmacr))); + } + + hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE; + sata_dwc_qc_complete(ap, qc, check_status); + ap->link.active_tag = ATA_TAG_POISON; + } else { + sata_dwc_qc_complete(ap, qc, check_status); + } +} + +static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc, + u32 check_status) +{ + u8 status = 0; + u32 mask = 0x0; + u8 tag = qc->tag; + struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + host_pvt.sata_dwc_sactive_queued = 0; + dev_dbg(ap->dev, "%s checkstatus? %x\n", __func__, check_status); + + if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) + dev_err(ap->dev, "TX DMA PENDING\n"); + else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) + dev_err(ap->dev, "RX DMA PENDING\n"); + dev_dbg(ap->dev, + "QC complete cmd=0x%02x status=0x%02x ata%u: protocol=%d\n", + qc->tf.command, status, ap->print_id, qc->tf.protocol); + + /* clear active bit */ + mask = (~(qcmd_tag_to_mask(tag))); + host_pvt.sata_dwc_sactive_queued = (host_pvt.sata_dwc_sactive_queued) \ + & mask; + host_pvt.sata_dwc_sactive_issued = (host_pvt.sata_dwc_sactive_issued) \ + & mask; + ata_qc_complete(qc); + return 0; +} + +static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev) +{ + /* Enable selective interrupts by setting the interrupt maskregister*/ + out_le32(&hsdev->sata_dwc_regs->intmr, + SATA_DWC_INTMR_ERRM | + SATA_DWC_INTMR_NEWFPM | + SATA_DWC_INTMR_PMABRTM | + SATA_DWC_INTMR_DMATM); + /* + * Unmask the error bits that should trigger an error interrupt by + * setting the error mask register. + */ + out_le32(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS); + + dev_dbg(hsdev->dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n", + __func__, in_le32(&hsdev->sata_dwc_regs->intmr), + in_le32(&hsdev->sata_dwc_regs->errmr)); +} + +static bool sata_dwc_dma_filter(struct dma_chan *chan, void *param) +{ + struct sata_dwc_device_port *hsdevp = param; + struct dw_dma_slave *dws = hsdevp->dws; + + if (dws->dma_dev != chan->device->dev) + return false; + + chan->private = dws; + return true; +} + +static void sata_dwc_setup_port(struct ata_ioports *port, unsigned long base) +{ + port->cmd_addr = (void __iomem *)base + 0x00; + port->data_addr = (void __iomem *)base + 0x00; + + port->error_addr = (void __iomem *)base + 0x04; + port->feature_addr = (void __iomem *)base + 0x04; + + port->nsect_addr = (void __iomem *)base + 0x08; + + port->lbal_addr = (void __iomem *)base + 0x0c; + port->lbam_addr = (void __iomem *)base + 0x10; + port->lbah_addr = (void __iomem *)base + 0x14; + + port->device_addr = (void __iomem *)base + 0x18; + port->command_addr = (void __iomem *)base + 0x1c; + port->status_addr = (void __iomem *)base + 0x1c; + + port->altstatus_addr = (void __iomem *)base + 0x20; + port->ctl_addr = (void __iomem *)base + 0x20; +} + +/* + * Function : sata_dwc_port_start + * arguments : struct ata_ioports *port + * Return value : returns 0 if success, error code otherwise + * This function allocates the scatter gather LLI table for AHB DMA + */ +static int sata_dwc_port_start(struct ata_port *ap) +{ + int err = 0; + struct sata_dwc_device *hsdev; + struct sata_dwc_device_port *hsdevp = NULL; + struct device *pdev; + dma_cap_mask_t mask; + int i; + + hsdev = HSDEV_FROM_AP(ap); + + dev_dbg(ap->dev, "%s: port_no=%d\n", __func__, ap->port_no); + + hsdev->host = ap->host; + pdev = ap->host->dev; + if (!pdev) { + dev_err(ap->dev, "%s: no ap->host->dev\n", __func__); + err = -ENODEV; + goto CLEANUP; + } + + /* Allocate Port Struct */ + hsdevp = kzalloc(sizeof(*hsdevp), GFP_KERNEL); + if (!hsdevp) { + dev_err(ap->dev, "%s: kmalloc failed for hsdevp\n", __func__); + err = -ENOMEM; + goto CLEANUP; + } + hsdevp->hsdev = hsdev; + + hsdevp->dws = &sata_dwc_dma_dws; + hsdevp->dws->dma_dev = hsdev->dev; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* Acquire DMA channel */ + hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp); + if (!hsdevp->chan) { + dev_err(hsdev->dev, "%s: dma channel unavailable\n", + __func__); + err = -EAGAIN; + goto CLEANUP_ALLOC; + } + + for (i = 0; i < SATA_DWC_QCMD_MAX; i++) + hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT; + + ap->bmdma_prd = NULL; /* set these so libata doesn't use them */ + ap->bmdma_prd_dma = 0; + + if (ap->port_no == 0) { + dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n", + __func__); + out_le32(&hsdev->sata_dwc_regs->dmacr, + SATA_DWC_DMACR_TXRXCH_CLEAR); + + dev_dbg(ap->dev, "%s: setting burst size in DBTSR\n", + __func__); + out_le32(&hsdev->sata_dwc_regs->dbtsr, + (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) | + SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT))); + } + + /* Clear any error bits before libata starts issuing commands */ + clear_serror(); + ap->private_data = hsdevp; + dev_dbg(ap->dev, "%s: done\n", __func__); + return 0; + +CLEANUP_ALLOC: + kfree(hsdevp); +CLEANUP: + dev_dbg(ap->dev, "%s: fail. ap->id = %d\n", __func__, ap->print_id); + return err; +} + +static void sata_dwc_port_stop(struct ata_port *ap) +{ + struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + + dev_dbg(ap->dev, "%s: ap->id = %d\n", __func__, ap->print_id); + + dmaengine_terminate_all(hsdevp->chan); + dma_release_channel(hsdevp->chan); + + kfree(hsdevp); + ap->private_data = NULL; +} + +/* + * Function : sata_dwc_exec_command_by_tag + * arguments : ata_port *ap, ata_taskfile *tf, u8 tag, u32 cmd_issued + * Return value : None + * This function keeps track of individual command tag ids and calls + * ata_exec_command in libata + */ +static void sata_dwc_exec_command_by_tag(struct ata_port *ap, + struct ata_taskfile *tf, + u8 tag, u32 cmd_issued) +{ + unsigned long flags; + struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + + dev_dbg(ap->dev, "%s cmd(0x%02x): %s tag=%d\n", __func__, tf->command, + ata_get_cmd_descript(tf->command), tag); + + spin_lock_irqsave(&ap->host->lock, flags); + hsdevp->cmd_issued[tag] = cmd_issued; + spin_unlock_irqrestore(&ap->host->lock, flags); + /* + * Clear SError before executing a new command. + * sata_dwc_scr_write and read can not be used here. Clearing the PM + * managed SError register for the disk needs to be done before the + * task file is loaded. + */ + clear_serror(); + ata_sff_exec_command(ap, tf); +} + +static void sata_dwc_bmdma_setup_by_tag(struct ata_queued_cmd *qc, u8 tag) +{ + sata_dwc_exec_command_by_tag(qc->ap, &qc->tf, tag, + SATA_DWC_CMD_ISSUED_PEND); +} + +static void sata_dwc_bmdma_setup(struct ata_queued_cmd *qc) +{ + u8 tag = qc->tag; + + if (ata_is_ncq(qc->tf.protocol)) { + dev_dbg(qc->ap->dev, "%s: ap->link.sactive=0x%08x tag=%d\n", + __func__, qc->ap->link.sactive, tag); + } else { + tag = 0; + } + sata_dwc_bmdma_setup_by_tag(qc, tag); +} + +static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag) +{ + int start_dma; + u32 reg; + struct sata_dwc_device *hsdev = HSDEV_FROM_QC(qc); + struct ata_port *ap = qc->ap; + struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + struct dma_async_tx_descriptor *desc = hsdevp->desc[tag]; + int dir = qc->dma_dir; + + if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_NOT) { + start_dma = 1; + if (dir == DMA_TO_DEVICE) + hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_TX; + else + hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_RX; + } else { + dev_err(ap->dev, + "%s: Command not pending cmd_issued=%d (tag=%d) DMA NOT started\n", + __func__, hsdevp->cmd_issued[tag], tag); + start_dma = 0; + } + + dev_dbg(ap->dev, + "%s qc=%p tag: %x cmd: 0x%02x dma_dir: %s start_dma? %x\n", + __func__, qc, tag, qc->tf.command, + get_dma_dir_descript(qc->dma_dir), start_dma); + sata_dwc_tf_dump(ap, &qc->tf); + + if (start_dma) { + reg = core_scr_read(SCR_ERROR); + if (reg & SATA_DWC_SERROR_ERR_BITS) { + dev_err(ap->dev, "%s: ****** SError=0x%08x ******\n", + __func__, reg); + } + + if (dir == DMA_TO_DEVICE) + out_le32(&hsdev->sata_dwc_regs->dmacr, + SATA_DWC_DMACR_TXCHEN); + else + out_le32(&hsdev->sata_dwc_regs->dmacr, + SATA_DWC_DMACR_RXCHEN); + + /* Enable AHB DMA transfer on the specified channel */ + dmaengine_submit(desc); + dma_async_issue_pending(hsdevp->chan); + } +} + +static void sata_dwc_bmdma_start(struct ata_queued_cmd *qc) +{ + u8 tag = qc->tag; + + if (ata_is_ncq(qc->tf.protocol)) { + dev_dbg(qc->ap->dev, "%s: ap->link.sactive=0x%08x tag=%d\n", + __func__, qc->ap->link.sactive, tag); + } else { + tag = 0; + } + dev_dbg(qc->ap->dev, "%s\n", __func__); + sata_dwc_bmdma_start_by_tag(qc, tag); +} + +/* + * Function : sata_dwc_qc_prep_by_tag + * arguments : ata_queued_cmd *qc, u8 tag + * Return value : None + * qc_prep for a particular queued command based on tag + */ +static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag) +{ + struct dma_async_tx_descriptor *desc; + struct ata_port *ap = qc->ap; + struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + + dev_dbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n", + __func__, ap->port_no, get_dma_dir_descript(qc->dma_dir), + qc->n_elem); + + desc = dma_dwc_xfer_setup(qc); + if (!desc) { + dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns NULL\n", + __func__); + return; + } + hsdevp->desc[tag] = desc; +} + +static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc) +{ + u32 sactive; + u8 tag = qc->tag; + struct ata_port *ap = qc->ap; + +#ifdef DEBUG_NCQ + if (qc->tag > 0 || ap->link.sactive > 1) + dev_info(ap->dev, + "%s ap id=%d cmd(0x%02x)=%s qc tag=%d prot=%s ap active_tag=0x%08x ap sactive=0x%08x\n", + __func__, ap->print_id, qc->tf.command, + ata_get_cmd_descript(qc->tf.command), + qc->tag, get_prot_descript(qc->tf.protocol), + ap->link.active_tag, ap->link.sactive); +#endif + + if (!ata_is_ncq(qc->tf.protocol)) + tag = 0; + sata_dwc_qc_prep_by_tag(qc, tag); + + if (ata_is_ncq(qc->tf.protocol)) { + sactive = core_scr_read(SCR_ACTIVE); + sactive |= (0x00000001 << tag); + core_scr_write(SCR_ACTIVE, sactive); + + dev_dbg(qc->ap->dev, + "%s: tag=%d ap->link.sactive = 0x%08x sactive=0x%08x\n", + __func__, tag, qc->ap->link.sactive, sactive); + + ap->ops->sff_tf_load(ap, &qc->tf); + sata_dwc_exec_command_by_tag(ap, &qc->tf, qc->tag, + SATA_DWC_CMD_ISSUED_PEND); + } else { + ata_sff_qc_issue(qc); + } + return 0; +} + +/* + * Function : sata_dwc_qc_prep + * arguments : ata_queued_cmd *qc + * Return value : None + * qc_prep for a particular queued command + */ + +static void sata_dwc_qc_prep(struct ata_queued_cmd *qc) +{ + if ((qc->dma_dir == DMA_NONE) || (qc->tf.protocol == ATA_PROT_PIO)) + return; + +#ifdef DEBUG_NCQ + if (qc->tag > 0) + dev_info(qc->ap->dev, "%s: qc->tag=%d ap->active_tag=0x%08x\n", + __func__, qc->tag, qc->ap->link.active_tag); + + return ; +#endif +} + +static void sata_dwc_error_handler(struct ata_port *ap) +{ + ata_sff_error_handler(ap); +} + +static int sata_dwc_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct sata_dwc_device *hsdev = HSDEV_FROM_AP(link->ap); + int ret; + + ret = sata_sff_hardreset(link, class, deadline); + + sata_dwc_enable_interrupts(hsdev); + + /* Reconfigure the DMA control register */ + out_le32(&hsdev->sata_dwc_regs->dmacr, + SATA_DWC_DMACR_TXRXCH_CLEAR); + + /* Reconfigure the DMA Burst Transaction Size register */ + out_le32(&hsdev->sata_dwc_regs->dbtsr, + SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) | + SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)); + + return ret; +} + +/* + * scsi mid-layer and libata interface structures + */ +static struct scsi_host_template sata_dwc_sht = { + ATA_NCQ_SHT(DRV_NAME), + /* + * test-only: Currently this driver doesn't handle NCQ + * correctly. We enable NCQ but set the queue depth to a + * max of 1. This will get fixed in in a future release. + */ + .sg_tablesize = LIBATA_MAX_PRD, + /* .can_queue = ATA_MAX_QUEUE, */ + .dma_boundary = ATA_DMA_BOUNDARY, +}; + +static struct ata_port_operations sata_dwc_ops = { + .inherits = &ata_sff_port_ops, + + .error_handler = sata_dwc_error_handler, + .hardreset = sata_dwc_hardreset, + + .qc_prep = sata_dwc_qc_prep, + .qc_issue = sata_dwc_qc_issue, + + .scr_read = sata_dwc_scr_read, + .scr_write = sata_dwc_scr_write, + + .port_start = sata_dwc_port_start, + .port_stop = sata_dwc_port_stop, + + .bmdma_setup = sata_dwc_bmdma_setup, + .bmdma_start = sata_dwc_bmdma_start, +}; + +static const struct ata_port_info sata_dwc_port_info[] = { + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NCQ, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &sata_dwc_ops, + }, +}; + +static int sata_dwc_probe(struct platform_device *ofdev) +{ + struct sata_dwc_device *hsdev; + u32 idr, versionr; + char *ver = (char *)&versionr; + u8 __iomem *base; + int err = 0; + int irq; + struct ata_host *host; + struct ata_port_info pi = sata_dwc_port_info[0]; + const struct ata_port_info *ppi[] = { &pi, NULL }; + struct device_node *np = ofdev->dev.of_node; + + /* Allocate DWC SATA device */ + host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS); + hsdev = devm_kzalloc(&ofdev->dev, sizeof(*hsdev), GFP_KERNEL); + if (!host || !hsdev) + return -ENOMEM; + + host->private_data = hsdev; + + /* Ioremap SATA registers */ + base = of_iomap(np, 0); + if (!base) { + dev_err(&ofdev->dev, + "ioremap failed for SATA register address\n"); + return -ENODEV; + } + hsdev->reg_base = base; + dev_dbg(&ofdev->dev, "ioremap done for SATA register address\n"); + + /* Synopsys DWC SATA specific Registers */ + hsdev->sata_dwc_regs = (void *__iomem)(base + SATA_DWC_REG_OFFSET); + + /* Setup port */ + host->ports[0]->ioaddr.cmd_addr = base; + host->ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET; + host_pvt.scr_addr_sstatus = base + SATA_DWC_SCR_OFFSET; + sata_dwc_setup_port(&host->ports[0]->ioaddr, (unsigned long)base); + + /* Read the ID and Version Registers */ + idr = in_le32(&hsdev->sata_dwc_regs->idr); + versionr = in_le32(&hsdev->sata_dwc_regs->versionr); + dev_notice(&ofdev->dev, "id %d, controller version %c.%c%c\n", + idr, ver[0], ver[1], ver[2]); + + /* Get SATA DMA interrupt number */ + hsdev->dma->irq = irq_of_parse_and_map(np, 1); + if (hsdev->dma->irq == NO_IRQ) { + dev_err(&ofdev->dev, "no SATA DMA irq\n"); + err = -ENODEV; + goto error_iomap; + } + + /* Get physical SATA DMA register base address */ + hsdev->dma->regs = of_iomap(np, 1); + if (!hsdev->dma->regs) { + dev_err(&ofdev->dev, + "ioremap failed for AHBDMA register address\n"); + err = -ENODEV; + goto error_iomap; + } + + /* Save dev for later use in dev_xxx() routines */ + hsdev->dev = &ofdev->dev; + + hsdev->dma->dev = &ofdev->dev; + + /* Initialize AHB DMAC */ + err = dw_dma_probe(hsdev->dma, NULL); + if (err) + goto error_dma_iomap; + + /* Enable SATA Interrupts */ + sata_dwc_enable_interrupts(hsdev); + + /* Get SATA interrupt number */ + irq = irq_of_parse_and_map(np, 0); + if (irq == NO_IRQ) { + dev_err(&ofdev->dev, "no SATA DMA irq\n"); + err = -ENODEV; + goto error_out; + } + + /* + * Now, register with libATA core, this will also initiate the + * device discovery process, invoking our port_start() handler & + * error_handler() to execute a dummy Softreset EH session + */ + err = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht); + if (err) + dev_err(&ofdev->dev, "failed to activate host"); + + dev_set_drvdata(&ofdev->dev, host); + return 0; + +error_out: + /* Free SATA DMA resources */ + dw_dma_remove(hsdev->dma); +error_dma_iomap: + iounmap(hsdev->dma->regs); +error_iomap: + iounmap(base); + return err; +} + +static int sata_dwc_remove(struct platform_device *ofdev) +{ + struct device *dev = &ofdev->dev; + struct ata_host *host = dev_get_drvdata(dev); + struct sata_dwc_device *hsdev = host->private_data; + + ata_host_detach(host); + + /* Free SATA DMA resources */ + dw_dma_remove(hsdev->dma); + + iounmap(hsdev->dma->regs); + iounmap(hsdev->reg_base); + dev_dbg(&ofdev->dev, "done\n"); + return 0; +} + +static const struct of_device_id sata_dwc_match[] = { + { .compatible = "amcc,sata-460ex", }, + {} +}; +MODULE_DEVICE_TABLE(of, sata_dwc_match); + +static struct platform_driver sata_dwc_driver = { + .driver = { + .name = DRV_NAME, + .of_match_table = sata_dwc_match, + }, + .probe = sata_dwc_probe, + .remove = sata_dwc_remove, +}; + +module_platform_driver(sata_dwc_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mark Miesfeld "); +MODULE_DESCRIPTION("DesignWare Cores SATA controller low level driver"); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c new file mode 100644 index 000000000..5389579c5 --- /dev/null +++ b/drivers/ata/sata_fsl.c @@ -0,0 +1,1644 @@ +/* + * drivers/ata/sata_fsl.c + * + * Freescale 3.0Gbps SATA device driver + * + * Author: Ashish Kalra + * Li Yang + * + * Copyright (c) 2006-2007, 2011-2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +static unsigned int intr_coalescing_count; +module_param(intr_coalescing_count, int, S_IRUGO); +MODULE_PARM_DESC(intr_coalescing_count, + "INT coalescing count threshold (1..31)"); + +static unsigned int intr_coalescing_ticks; +module_param(intr_coalescing_ticks, int, S_IRUGO); +MODULE_PARM_DESC(intr_coalescing_ticks, + "INT coalescing timer threshold in AHB ticks"); +/* Controller information */ +enum { + SATA_FSL_QUEUE_DEPTH = 16, + SATA_FSL_MAX_PRD = 63, + SATA_FSL_MAX_PRD_USABLE = SATA_FSL_MAX_PRD - 1, + SATA_FSL_MAX_PRD_DIRECT = 16, /* Direct PRDT entries */ + + SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | + ATA_FLAG_PMP | ATA_FLAG_NCQ | ATA_FLAG_AN), + + SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH, + SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */ + SATA_FSL_CMD_SLOT_SIZE = (SATA_FSL_MAX_CMDS * SATA_FSL_CMD_HDR_SIZE), + + /* + * SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and + * chained indirect PRDEs up to a max count of 63. + * We are allocating an array of 63 PRDEs contiguously, but PRDE#15 will + * be setup as an indirect descriptor, pointing to it's next + * (contiguous) PRDE. Though chained indirect PRDE arrays are + * supported,it will be more efficient to use a direct PRDT and + * a single chain/link to indirect PRDE array/PRDT. + */ + + SATA_FSL_CMD_DESC_CFIS_SZ = 32, + SATA_FSL_CMD_DESC_SFIS_SZ = 32, + SATA_FSL_CMD_DESC_ACMD_SZ = 16, + SATA_FSL_CMD_DESC_RSRVD = 16, + + SATA_FSL_CMD_DESC_SIZE = (SATA_FSL_CMD_DESC_CFIS_SZ + + SATA_FSL_CMD_DESC_SFIS_SZ + + SATA_FSL_CMD_DESC_ACMD_SZ + + SATA_FSL_CMD_DESC_RSRVD + + SATA_FSL_MAX_PRD * 16), + + SATA_FSL_CMD_DESC_OFFSET_TO_PRDT = + (SATA_FSL_CMD_DESC_CFIS_SZ + + SATA_FSL_CMD_DESC_SFIS_SZ + + SATA_FSL_CMD_DESC_ACMD_SZ + + SATA_FSL_CMD_DESC_RSRVD), + + SATA_FSL_CMD_DESC_AR_SZ = (SATA_FSL_CMD_DESC_SIZE * SATA_FSL_MAX_CMDS), + SATA_FSL_PORT_PRIV_DMA_SZ = (SATA_FSL_CMD_SLOT_SIZE + + SATA_FSL_CMD_DESC_AR_SZ), + + /* + * MPC8315 has two SATA controllers, SATA1 & SATA2 + * (one port per controller) + * MPC837x has 2/4 controllers, one port per controller + */ + + SATA_FSL_MAX_PORTS = 1, + + SATA_FSL_IRQ_FLAG = IRQF_SHARED, +}; + +/* + * Interrupt Coalescing Control Register bitdefs */ +enum { + ICC_MIN_INT_COUNT_THRESHOLD = 1, + ICC_MAX_INT_COUNT_THRESHOLD = ((1 << 5) - 1), + ICC_MIN_INT_TICKS_THRESHOLD = 0, + ICC_MAX_INT_TICKS_THRESHOLD = ((1 << 19) - 1), + ICC_SAFE_INT_TICKS = 1, +}; + +/* +* Host Controller command register set - per port +*/ +enum { + CQ = 0, + CA = 8, + CC = 0x10, + CE = 0x18, + DE = 0x20, + CHBA = 0x24, + HSTATUS = 0x28, + HCONTROL = 0x2C, + CQPMP = 0x30, + SIGNATURE = 0x34, + ICC = 0x38, + + /* + * Host Status Register (HStatus) bitdefs + */ + ONLINE = (1 << 31), + GOING_OFFLINE = (1 << 30), + BIST_ERR = (1 << 29), + CLEAR_ERROR = (1 << 27), + + FATAL_ERR_HC_MASTER_ERR = (1 << 18), + FATAL_ERR_PARITY_ERR_TX = (1 << 17), + FATAL_ERR_PARITY_ERR_RX = (1 << 16), + FATAL_ERR_DATA_UNDERRUN = (1 << 13), + FATAL_ERR_DATA_OVERRUN = (1 << 12), + FATAL_ERR_CRC_ERR_TX = (1 << 11), + FATAL_ERR_CRC_ERR_RX = (1 << 10), + FATAL_ERR_FIFO_OVRFL_TX = (1 << 9), + FATAL_ERR_FIFO_OVRFL_RX = (1 << 8), + + FATAL_ERROR_DECODE = FATAL_ERR_HC_MASTER_ERR | + FATAL_ERR_PARITY_ERR_TX | + FATAL_ERR_PARITY_ERR_RX | + FATAL_ERR_DATA_UNDERRUN | + FATAL_ERR_DATA_OVERRUN | + FATAL_ERR_CRC_ERR_TX | + FATAL_ERR_CRC_ERR_RX | + FATAL_ERR_FIFO_OVRFL_TX | FATAL_ERR_FIFO_OVRFL_RX, + + INT_ON_DATA_LENGTH_MISMATCH = (1 << 12), + INT_ON_FATAL_ERR = (1 << 5), + INT_ON_PHYRDY_CHG = (1 << 4), + + INT_ON_SIGNATURE_UPDATE = (1 << 3), + INT_ON_SNOTIFY_UPDATE = (1 << 2), + INT_ON_SINGL_DEVICE_ERR = (1 << 1), + INT_ON_CMD_COMPLETE = 1, + + INT_ON_ERROR = INT_ON_FATAL_ERR | INT_ON_SNOTIFY_UPDATE | + INT_ON_PHYRDY_CHG | INT_ON_SINGL_DEVICE_ERR, + + /* + * Host Control Register (HControl) bitdefs + */ + HCONTROL_ONLINE_PHY_RST = (1 << 31), + HCONTROL_FORCE_OFFLINE = (1 << 30), + HCONTROL_LEGACY = (1 << 28), + HCONTROL_PARITY_PROT_MOD = (1 << 14), + HCONTROL_DPATH_PARITY = (1 << 12), + HCONTROL_SNOOP_ENABLE = (1 << 10), + HCONTROL_PMP_ATTACHED = (1 << 9), + HCONTROL_COPYOUT_STATFIS = (1 << 8), + IE_ON_FATAL_ERR = (1 << 5), + IE_ON_PHYRDY_CHG = (1 << 4), + IE_ON_SIGNATURE_UPDATE = (1 << 3), + IE_ON_SNOTIFY_UPDATE = (1 << 2), + IE_ON_SINGL_DEVICE_ERR = (1 << 1), + IE_ON_CMD_COMPLETE = 1, + + DEFAULT_PORT_IRQ_ENABLE_MASK = IE_ON_FATAL_ERR | IE_ON_PHYRDY_CHG | + IE_ON_SIGNATURE_UPDATE | IE_ON_SNOTIFY_UPDATE | + IE_ON_SINGL_DEVICE_ERR | IE_ON_CMD_COMPLETE, + + EXT_INDIRECT_SEG_PRD_FLAG = (1 << 31), + DATA_SNOOP_ENABLE_V1 = (1 << 22), + DATA_SNOOP_ENABLE_V2 = (1 << 28), +}; + +/* + * SATA Superset Registers + */ +enum { + SSTATUS = 0, + SERROR = 4, + SCONTROL = 8, + SNOTIFY = 0xC, +}; + +/* + * Control Status Register Set + */ +enum { + TRANSCFG = 0, + TRANSSTATUS = 4, + LINKCFG = 8, + LINKCFG1 = 0xC, + LINKCFG2 = 0x10, + LINKSTATUS = 0x14, + LINKSTATUS1 = 0x18, + PHYCTRLCFG = 0x1C, + COMMANDSTAT = 0x20, +}; + +/* TRANSCFG (transport-layer) configuration control */ +enum { + TRANSCFG_RX_WATER_MARK = (1 << 4), +}; + +/* PHY (link-layer) configuration control */ +enum { + PHY_BIST_ENABLE = 0x01, +}; + +/* + * Command Header Table entry, i.e, command slot + * 4 Dwords per command slot, command header size == 64 Dwords. + */ +struct cmdhdr_tbl_entry { + u32 cda; + u32 prde_fis_len; + u32 ttl; + u32 desc_info; +}; + +/* + * Description information bitdefs + */ +enum { + CMD_DESC_RES = (1 << 11), + VENDOR_SPECIFIC_BIST = (1 << 10), + CMD_DESC_SNOOP_ENABLE = (1 << 9), + FPDMA_QUEUED_CMD = (1 << 8), + SRST_CMD = (1 << 7), + BIST = (1 << 6), + ATAPI_CMD = (1 << 5), +}; + +/* + * Command Descriptor + */ +struct command_desc { + u8 cfis[8 * 4]; + u8 sfis[8 * 4]; + u8 acmd[4 * 4]; + u8 fill[4 * 4]; + u32 prdt[SATA_FSL_MAX_PRD_DIRECT * 4]; + u32 prdt_indirect[(SATA_FSL_MAX_PRD - SATA_FSL_MAX_PRD_DIRECT) * 4]; +}; + +/* + * Physical region table descriptor(PRD) + */ + +struct prde { + u32 dba; + u8 fill[2 * 4]; + u32 ddc_and_ext; +}; + +/* + * ata_port private data + * This is our per-port instance data. + */ +struct sata_fsl_port_priv { + struct cmdhdr_tbl_entry *cmdslot; + dma_addr_t cmdslot_paddr; + struct command_desc *cmdentry; + dma_addr_t cmdentry_paddr; +}; + +/* + * ata_port->host_set private data + */ +struct sata_fsl_host_priv { + void __iomem *hcr_base; + void __iomem *ssr_base; + void __iomem *csr_base; + int irq; + int data_snoop; + struct device_attribute intr_coalescing; + struct device_attribute rx_watermark; +}; + +static void fsl_sata_set_irq_coalescing(struct ata_host *host, + unsigned int count, unsigned int ticks) +{ + struct sata_fsl_host_priv *host_priv = host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + unsigned long flags; + + if (count > ICC_MAX_INT_COUNT_THRESHOLD) + count = ICC_MAX_INT_COUNT_THRESHOLD; + else if (count < ICC_MIN_INT_COUNT_THRESHOLD) + count = ICC_MIN_INT_COUNT_THRESHOLD; + + if (ticks > ICC_MAX_INT_TICKS_THRESHOLD) + ticks = ICC_MAX_INT_TICKS_THRESHOLD; + else if ((ICC_MIN_INT_TICKS_THRESHOLD == ticks) && + (count > ICC_MIN_INT_COUNT_THRESHOLD)) + ticks = ICC_SAFE_INT_TICKS; + + spin_lock_irqsave(&host->lock, flags); + iowrite32((count << 24 | ticks), hcr_base + ICC); + + intr_coalescing_count = count; + intr_coalescing_ticks = ticks; + spin_unlock_irqrestore(&host->lock, flags); + + DPRINTK("interrupt coalescing, count = 0x%x, ticks = %x\n", + intr_coalescing_count, intr_coalescing_ticks); + DPRINTK("ICC register status: (hcr base: 0x%x) = 0x%x\n", + hcr_base, ioread32(hcr_base + ICC)); +} + +static ssize_t fsl_sata_intr_coalescing_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d %d\n", + intr_coalescing_count, intr_coalescing_ticks); +} + +static ssize_t fsl_sata_intr_coalescing_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + unsigned int coalescing_count, coalescing_ticks; + + if (sscanf(buf, "%d%d", + &coalescing_count, + &coalescing_ticks) != 2) { + printk(KERN_ERR "fsl-sata: wrong parameter format.\n"); + return -EINVAL; + } + + fsl_sata_set_irq_coalescing(dev_get_drvdata(dev), + coalescing_count, coalescing_ticks); + + return strlen(buf); +} + +static ssize_t fsl_sata_rx_watermark_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + unsigned int rx_watermark; + unsigned long flags; + struct ata_host *host = dev_get_drvdata(dev); + struct sata_fsl_host_priv *host_priv = host->private_data; + void __iomem *csr_base = host_priv->csr_base; + + spin_lock_irqsave(&host->lock, flags); + rx_watermark = ioread32(csr_base + TRANSCFG); + rx_watermark &= 0x1f; + + spin_unlock_irqrestore(&host->lock, flags); + return sprintf(buf, "%d\n", rx_watermark); +} + +static ssize_t fsl_sata_rx_watermark_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + unsigned int rx_watermark; + unsigned long flags; + struct ata_host *host = dev_get_drvdata(dev); + struct sata_fsl_host_priv *host_priv = host->private_data; + void __iomem *csr_base = host_priv->csr_base; + u32 temp; + + if (sscanf(buf, "%d", &rx_watermark) != 1) { + printk(KERN_ERR "fsl-sata: wrong parameter format.\n"); + return -EINVAL; + } + + spin_lock_irqsave(&host->lock, flags); + temp = ioread32(csr_base + TRANSCFG); + temp &= 0xffffffe0; + iowrite32(temp | rx_watermark, csr_base + TRANSCFG); + + spin_unlock_irqrestore(&host->lock, flags); + return strlen(buf); +} + +static inline unsigned int sata_fsl_tag(unsigned int tag, + void __iomem *hcr_base) +{ + /* We let libATA core do actual (queue) tag allocation */ + + /* all non NCQ/queued commands should have tag#0 */ + if (ata_tag_internal(tag)) { + DPRINTK("mapping internal cmds to tag#0\n"); + return 0; + } + + if (unlikely(tag >= SATA_FSL_QUEUE_DEPTH)) { + DPRINTK("tag %d invalid : out of range\n", tag); + return 0; + } + + if (unlikely((ioread32(hcr_base + CQ)) & (1 << tag))) { + DPRINTK("tag %d invalid : in use!!\n", tag); + return 0; + } + + return tag; +} + +static void sata_fsl_setup_cmd_hdr_entry(struct sata_fsl_port_priv *pp, + unsigned int tag, u32 desc_info, + u32 data_xfer_len, u8 num_prde, + u8 fis_len) +{ + dma_addr_t cmd_descriptor_address; + + cmd_descriptor_address = pp->cmdentry_paddr + + tag * SATA_FSL_CMD_DESC_SIZE; + + /* NOTE: both data_xfer_len & fis_len are Dword counts */ + + pp->cmdslot[tag].cda = cpu_to_le32(cmd_descriptor_address); + pp->cmdslot[tag].prde_fis_len = + cpu_to_le32((num_prde << 16) | (fis_len << 2)); + pp->cmdslot[tag].ttl = cpu_to_le32(data_xfer_len & ~0x03); + pp->cmdslot[tag].desc_info = cpu_to_le32(desc_info | (tag & 0x1F)); + + VPRINTK("cda=0x%x, prde_fis_len=0x%x, ttl=0x%x, di=0x%x\n", + pp->cmdslot[tag].cda, + pp->cmdslot[tag].prde_fis_len, + pp->cmdslot[tag].ttl, pp->cmdslot[tag].desc_info); + +} + +static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc, + u32 *ttl, dma_addr_t cmd_desc_paddr, + int data_snoop) +{ + struct scatterlist *sg; + unsigned int num_prde = 0; + u32 ttl_dwords = 0; + + /* + * NOTE : direct & indirect prdt's are contiguously allocated + */ + struct prde *prd = (struct prde *)&((struct command_desc *) + cmd_desc)->prdt; + + struct prde *prd_ptr_to_indirect_ext = NULL; + unsigned indirect_ext_segment_sz = 0; + dma_addr_t indirect_ext_segment_paddr; + unsigned int si; + + VPRINTK("SATA FSL : cd = 0x%p, prd = 0x%p\n", cmd_desc, prd); + + indirect_ext_segment_paddr = cmd_desc_paddr + + SATA_FSL_CMD_DESC_OFFSET_TO_PRDT + SATA_FSL_MAX_PRD_DIRECT * 16; + + for_each_sg(qc->sg, sg, qc->n_elem, si) { + dma_addr_t sg_addr = sg_dma_address(sg); + u32 sg_len = sg_dma_len(sg); + + VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%llx, sg_len = %d\n", + (unsigned long long)sg_addr, sg_len); + + /* warn if each s/g element is not dword aligned */ + if (unlikely(sg_addr & 0x03)) + ata_port_err(qc->ap, "s/g addr unaligned : 0x%llx\n", + (unsigned long long)sg_addr); + if (unlikely(sg_len & 0x03)) + ata_port_err(qc->ap, "s/g len unaligned : 0x%x\n", + sg_len); + + if (num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1) && + sg_next(sg) != NULL) { + VPRINTK("setting indirect prde\n"); + prd_ptr_to_indirect_ext = prd; + prd->dba = cpu_to_le32(indirect_ext_segment_paddr); + indirect_ext_segment_sz = 0; + ++prd; + ++num_prde; + } + + ttl_dwords += sg_len; + prd->dba = cpu_to_le32(sg_addr); + prd->ddc_and_ext = cpu_to_le32(data_snoop | (sg_len & ~0x03)); + + VPRINTK("sg_fill, ttl=%d, dba=0x%x, ddc=0x%x\n", + ttl_dwords, prd->dba, prd->ddc_and_ext); + + ++num_prde; + ++prd; + if (prd_ptr_to_indirect_ext) + indirect_ext_segment_sz += sg_len; + } + + if (prd_ptr_to_indirect_ext) { + /* set indirect extension flag along with indirect ext. size */ + prd_ptr_to_indirect_ext->ddc_and_ext = + cpu_to_le32((EXT_INDIRECT_SEG_PRD_FLAG | + data_snoop | + (indirect_ext_segment_sz & ~0x03))); + } + + *ttl = ttl_dwords; + return num_prde; +} + +static void sata_fsl_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sata_fsl_port_priv *pp = ap->private_data; + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + unsigned int tag = sata_fsl_tag(qc->tag, hcr_base); + struct command_desc *cd; + u32 desc_info = CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE; + u32 num_prde = 0; + u32 ttl_dwords = 0; + dma_addr_t cd_paddr; + + cd = (struct command_desc *)pp->cmdentry + tag; + cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE; + + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *) &cd->cfis); + + VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n", + cd->cfis[0], cd->cfis[1], cd->cfis[2]); + + if (qc->tf.protocol == ATA_PROT_NCQ) { + VPRINTK("FPDMA xfer,Sctor cnt[0:7],[8:15] = %d,%d\n", + cd->cfis[3], cd->cfis[11]); + } + + /* setup "ACMD - atapi command" in cmd. desc. if this is ATAPI cmd */ + if (ata_is_atapi(qc->tf.protocol)) { + desc_info |= ATAPI_CMD; + memset((void *)&cd->acmd, 0, 32); + memcpy((void *)&cd->acmd, qc->cdb, qc->dev->cdb_len); + } + + if (qc->flags & ATA_QCFLAG_DMAMAP) + num_prde = sata_fsl_fill_sg(qc, (void *)cd, + &ttl_dwords, cd_paddr, + host_priv->data_snoop); + + if (qc->tf.protocol == ATA_PROT_NCQ) + desc_info |= FPDMA_QUEUED_CMD; + + sata_fsl_setup_cmd_hdr_entry(pp, tag, desc_info, ttl_dwords, + num_prde, 5); + + VPRINTK("SATA FSL : xx_qc_prep, di = 0x%x, ttl = %d, num_prde = %d\n", + desc_info, ttl_dwords, num_prde); +} + +static unsigned int sata_fsl_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + unsigned int tag = sata_fsl_tag(qc->tag, hcr_base); + + VPRINTK("xx_qc_issue called,CQ=0x%x,CA=0x%x,CE=0x%x,CC=0x%x\n", + ioread32(CQ + hcr_base), + ioread32(CA + hcr_base), + ioread32(CE + hcr_base), ioread32(CC + hcr_base)); + + iowrite32(qc->dev->link->pmp, CQPMP + hcr_base); + + /* Simply queue command to the controller/device */ + iowrite32(1 << tag, CQ + hcr_base); + + VPRINTK("xx_qc_issue called, tag=%d, CQ=0x%x, CA=0x%x\n", + tag, ioread32(CQ + hcr_base), ioread32(CA + hcr_base)); + + VPRINTK("CE=0x%x, DE=0x%x, CC=0x%x, CmdStat = 0x%x\n", + ioread32(CE + hcr_base), + ioread32(DE + hcr_base), + ioread32(CC + hcr_base), + ioread32(COMMANDSTAT + host_priv->csr_base)); + + return 0; +} + +static bool sata_fsl_qc_fill_rtf(struct ata_queued_cmd *qc) +{ + struct sata_fsl_port_priv *pp = qc->ap->private_data; + struct sata_fsl_host_priv *host_priv = qc->ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + unsigned int tag = sata_fsl_tag(qc->tag, hcr_base); + struct command_desc *cd; + + cd = pp->cmdentry + tag; + + ata_tf_from_fis(cd->sfis, &qc->result_tf); + return true; +} + +static int sata_fsl_scr_write(struct ata_link *link, + unsigned int sc_reg_in, u32 val) +{ + struct sata_fsl_host_priv *host_priv = link->ap->host->private_data; + void __iomem *ssr_base = host_priv->ssr_base; + unsigned int sc_reg; + + switch (sc_reg_in) { + case SCR_STATUS: + case SCR_ERROR: + case SCR_CONTROL: + case SCR_ACTIVE: + sc_reg = sc_reg_in; + break; + default: + return -EINVAL; + } + + VPRINTK("xx_scr_write, reg_in = %d\n", sc_reg); + + iowrite32(val, ssr_base + (sc_reg * 4)); + return 0; +} + +static int sata_fsl_scr_read(struct ata_link *link, + unsigned int sc_reg_in, u32 *val) +{ + struct sata_fsl_host_priv *host_priv = link->ap->host->private_data; + void __iomem *ssr_base = host_priv->ssr_base; + unsigned int sc_reg; + + switch (sc_reg_in) { + case SCR_STATUS: + case SCR_ERROR: + case SCR_CONTROL: + case SCR_ACTIVE: + sc_reg = sc_reg_in; + break; + default: + return -EINVAL; + } + + VPRINTK("xx_scr_read, reg_in = %d\n", sc_reg); + + *val = ioread32(ssr_base + (sc_reg * 4)); + return 0; +} + +static void sata_fsl_freeze(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + VPRINTK("xx_freeze, CQ=0x%x, CA=0x%x, CE=0x%x, DE=0x%x\n", + ioread32(CQ + hcr_base), + ioread32(CA + hcr_base), + ioread32(CE + hcr_base), ioread32(DE + hcr_base)); + VPRINTK("CmdStat = 0x%x\n", + ioread32(host_priv->csr_base + COMMANDSTAT)); + + /* disable interrupts on the controller/port */ + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp & ~0x3F), hcr_base + HCONTROL); + + VPRINTK("in xx_freeze : HControl = 0x%x, HStatus = 0x%x\n", + ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS)); +} + +static void sata_fsl_thaw(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + /* ack. any pending IRQs for this controller/port */ + temp = ioread32(hcr_base + HSTATUS); + + VPRINTK("xx_thaw, pending IRQs = 0x%x\n", (temp & 0x3F)); + + if (temp & 0x3F) + iowrite32((temp & 0x3F), hcr_base + HSTATUS); + + /* enable interrupts on the controller/port */ + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL); + + VPRINTK("xx_thaw : HControl = 0x%x, HStatus = 0x%x\n", + ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS)); +} + +static void sata_fsl_pmp_attach(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp | HCONTROL_PMP_ATTACHED), hcr_base + HCONTROL); +} + +static void sata_fsl_pmp_detach(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + temp = ioread32(hcr_base + HCONTROL); + temp &= ~HCONTROL_PMP_ATTACHED; + iowrite32(temp, hcr_base + HCONTROL); + + /* enable interrupts on the controller/port */ + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL); + +} + +static int sata_fsl_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct sata_fsl_port_priv *pp; + void *mem; + dma_addr_t mem_dma; + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + pp = kzalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + + mem = dma_zalloc_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, &mem_dma, + GFP_KERNEL); + if (!mem) { + kfree(pp); + return -ENOMEM; + } + + pp->cmdslot = mem; + pp->cmdslot_paddr = mem_dma; + + mem += SATA_FSL_CMD_SLOT_SIZE; + mem_dma += SATA_FSL_CMD_SLOT_SIZE; + + pp->cmdentry = mem; + pp->cmdentry_paddr = mem_dma; + + ap->private_data = pp; + + VPRINTK("CHBA = 0x%x, cmdentry_phys = 0x%x\n", + pp->cmdslot_paddr, pp->cmdentry_paddr); + + /* Now, update the CHBA register in host controller cmd register set */ + iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA); + + /* + * Now, we can bring the controller on-line & also initiate + * the COMINIT sequence, we simply return here and the boot-probing + * & device discovery process is re-initiated by libATA using a + * Softreset EH (dummy) session. Hence, boot probing and device + * discovey will be part of sata_fsl_softreset() callback. + */ + + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp | HCONTROL_ONLINE_PHY_RST), hcr_base + HCONTROL); + + VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); + VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); + VPRINTK("CHBA = 0x%x\n", ioread32(hcr_base + CHBA)); + + return 0; +} + +static void sata_fsl_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct sata_fsl_port_priv *pp = ap->private_data; + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + /* + * Force host controller to go off-line, aborting current operations + */ + temp = ioread32(hcr_base + HCONTROL); + temp &= ~HCONTROL_ONLINE_PHY_RST; + temp |= HCONTROL_FORCE_OFFLINE; + iowrite32(temp, hcr_base + HCONTROL); + + /* Poll for controller to go offline - should happen immediately */ + ata_wait_register(ap, hcr_base + HSTATUS, ONLINE, ONLINE, 1, 1); + + ap->private_data = NULL; + dma_free_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, + pp->cmdslot, pp->cmdslot_paddr); + + kfree(pp); +} + +static unsigned int sata_fsl_dev_classify(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + struct ata_taskfile tf; + u32 temp; + + temp = ioread32(hcr_base + SIGNATURE); + + VPRINTK("raw sig = 0x%x\n", temp); + VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); + VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); + + tf.lbah = (temp >> 24) & 0xff; + tf.lbam = (temp >> 16) & 0xff; + tf.lbal = (temp >> 8) & 0xff; + tf.nsect = temp & 0xff; + + return ata_dev_classify(&tf); +} + +static int sata_fsl_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + int i = 0; + unsigned long start_jiffies; + + DPRINTK("in xx_hardreset\n"); + +try_offline_again: + /* + * Force host controller to go off-line, aborting current operations + */ + temp = ioread32(hcr_base + HCONTROL); + temp &= ~HCONTROL_ONLINE_PHY_RST; + iowrite32(temp, hcr_base + HCONTROL); + + /* Poll for controller to go offline */ + temp = ata_wait_register(ap, hcr_base + HSTATUS, ONLINE, ONLINE, + 1, 500); + + if (temp & ONLINE) { + ata_port_err(ap, "Hardreset failed, not off-lined %d\n", i); + + /* + * Try to offline controller atleast twice + */ + i++; + if (i == 2) + goto err; + else + goto try_offline_again; + } + + DPRINTK("hardreset, controller off-lined\n"); + VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); + VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); + + /* + * PHY reset should remain asserted for atleast 1ms + */ + ata_msleep(ap, 1); + + sata_set_spd(link); + + /* + * Now, bring the host controller online again, this can take time + * as PHY reset and communication establishment, 1st D2H FIS and + * device signature update is done, on safe side assume 500ms + * NOTE : Host online status may be indicated immediately!! + */ + + temp = ioread32(hcr_base + HCONTROL); + temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE); + temp |= HCONTROL_PMP_ATTACHED; + iowrite32(temp, hcr_base + HCONTROL); + + temp = ata_wait_register(ap, hcr_base + HSTATUS, ONLINE, 0, 1, 500); + + if (!(temp & ONLINE)) { + ata_port_err(ap, "Hardreset failed, not on-lined\n"); + goto err; + } + + DPRINTK("hardreset, controller off-lined & on-lined\n"); + VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); + VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); + + /* + * First, wait for the PHYRDY change to occur before waiting for + * the signature, and also verify if SStatus indicates device + * presence + */ + + temp = ata_wait_register(ap, hcr_base + HSTATUS, 0xFF, 0, 1, 500); + if ((!(temp & 0x10)) || ata_link_offline(link)) { + ata_port_warn(ap, "No Device OR PHYRDY change,Hstatus = 0x%x\n", + ioread32(hcr_base + HSTATUS)); + *class = ATA_DEV_NONE; + return 0; + } + + /* + * Wait for the first D2H from device,i.e,signature update notification + */ + start_jiffies = jiffies; + temp = ata_wait_register(ap, hcr_base + HSTATUS, 0xFF, 0x10, + 500, jiffies_to_msecs(deadline - start_jiffies)); + + if ((temp & 0xFF) != 0x18) { + ata_port_warn(ap, "No Signature Update\n"); + *class = ATA_DEV_NONE; + goto do_followup_srst; + } else { + ata_port_info(ap, "Signature Update detected @ %d msecs\n", + jiffies_to_msecs(jiffies - start_jiffies)); + *class = sata_fsl_dev_classify(ap); + return 0; + } + +do_followup_srst: + /* + * request libATA to perform follow-up softreset + */ + return -EAGAIN; + +err: + return -EIO; +} + +static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct sata_fsl_port_priv *pp = ap->private_data; + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + int pmp = sata_srst_pmp(link); + u32 temp; + struct ata_taskfile tf; + u8 *cfis; + u32 Serror; + + DPRINTK("in xx_softreset\n"); + + if (ata_link_offline(link)) { + DPRINTK("PHY reports no device\n"); + *class = ATA_DEV_NONE; + return 0; + } + + /* + * Send a device reset (SRST) explicitly on command slot #0 + * Check : will the command queue (reg) be cleared during offlining ?? + * Also we will be online only if Phy commn. has been established + * and device presence has been detected, therefore if we have + * reached here, we can send a command to the target device + */ + + DPRINTK("Sending SRST/device reset\n"); + + ata_tf_init(link->device, &tf); + cfis = (u8 *) &pp->cmdentry->cfis; + + /* device reset/SRST is a control register update FIS, uses tag0 */ + sata_fsl_setup_cmd_hdr_entry(pp, 0, + SRST_CMD | CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, 0, 0, 5); + + tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */ + ata_tf_to_fis(&tf, pmp, 0, cfis); + + DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n", + cfis[0], cfis[1], cfis[2], cfis[3]); + + /* + * Queue SRST command to the controller/device, ensure that no + * other commands are active on the controller/device + */ + + DPRINTK("@Softreset, CQ = 0x%x, CA = 0x%x, CC = 0x%x\n", + ioread32(CQ + hcr_base), + ioread32(CA + hcr_base), ioread32(CC + hcr_base)); + + iowrite32(0xFFFF, CC + hcr_base); + if (pmp != SATA_PMP_CTRL_PORT) + iowrite32(pmp, CQPMP + hcr_base); + iowrite32(1, CQ + hcr_base); + + temp = ata_wait_register(ap, CQ + hcr_base, 0x1, 0x1, 1, 5000); + if (temp & 0x1) { + ata_port_warn(ap, "ATA_SRST issue failed\n"); + + DPRINTK("Softreset@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n", + ioread32(CQ + hcr_base), + ioread32(CA + hcr_base), ioread32(CC + hcr_base)); + + sata_fsl_scr_read(&ap->link, SCR_ERROR, &Serror); + + DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); + DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); + DPRINTK("Serror = 0x%x\n", Serror); + goto err; + } + + ata_msleep(ap, 1); + + /* + * SATA device enters reset state after receiving a Control register + * FIS with SRST bit asserted and it awaits another H2D Control reg. + * FIS with SRST bit cleared, then the device does internal diags & + * initialization, followed by indicating it's initialization status + * using ATA signature D2H register FIS to the host controller. + */ + + sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, + 0, 0, 5); + + tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */ + ata_tf_to_fis(&tf, pmp, 0, cfis); + + if (pmp != SATA_PMP_CTRL_PORT) + iowrite32(pmp, CQPMP + hcr_base); + iowrite32(1, CQ + hcr_base); + ata_msleep(ap, 150); /* ?? */ + + /* + * The above command would have signalled an interrupt on command + * complete, which needs special handling, by clearing the Nth + * command bit of the CCreg + */ + iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */ + + DPRINTK("SATA FSL : Now checking device signature\n"); + + *class = ATA_DEV_NONE; + + /* Verify if SStatus indicates device presence */ + if (ata_link_online(link)) { + /* + * if we are here, device presence has been detected, + * 1st D2H FIS would have been received, but sfis in + * command desc. is not updated, but signature register + * would have been updated + */ + + *class = sata_fsl_dev_classify(ap); + + DPRINTK("class = %d\n", *class); + VPRINTK("ccreg = 0x%x\n", ioread32(hcr_base + CC)); + VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE)); + } + + return 0; + +err: + return -EIO; +} + +static void sata_fsl_error_handler(struct ata_port *ap) +{ + + DPRINTK("in xx_error_handler\n"); + sata_pmp_error_handler(ap); + +} + +static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc) +{ + if (qc->flags & ATA_QCFLAG_FAILED) + qc->err_mask |= AC_ERR_OTHER; + + if (qc->err_mask) { + /* make DMA engine forget about the failed command */ + + } +} + +static void sata_fsl_error_intr(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 hstatus, dereg=0, cereg = 0, SError = 0; + unsigned int err_mask = 0, action = 0; + int freeze = 0, abort=0; + struct ata_link *link = NULL; + struct ata_queued_cmd *qc = NULL; + struct ata_eh_info *ehi; + + hstatus = ioread32(hcr_base + HSTATUS); + cereg = ioread32(hcr_base + CE); + + /* first, analyze and record host port events */ + link = &ap->link; + ehi = &link->eh_info; + ata_ehi_clear_desc(ehi); + + /* + * Handle & Clear SError + */ + + sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError); + if (unlikely(SError & 0xFFFF0000)) + sata_fsl_scr_write(&ap->link, SCR_ERROR, SError); + + DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n", + hstatus, cereg, ioread32(hcr_base + DE), SError); + + /* handle fatal errors */ + if (hstatus & FATAL_ERROR_DECODE) { + ehi->err_mask |= AC_ERR_ATA_BUS; + ehi->action |= ATA_EH_SOFTRESET; + + freeze = 1; + } + + /* Handle SDB FIS receive & notify update */ + if (hstatus & INT_ON_SNOTIFY_UPDATE) + sata_async_notification(ap); + + /* Handle PHYRDY change notification */ + if (hstatus & INT_ON_PHYRDY_CHG) { + DPRINTK("SATA FSL: PHYRDY change indication\n"); + + /* Setup a soft-reset EH action */ + ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, "%s", "PHY RDY changed"); + freeze = 1; + } + + /* handle single device errors */ + if (cereg) { + /* + * clear the command error, also clears queue to the device + * in error, and we can (re)issue commands to this device. + * When a device is in error all commands queued into the + * host controller and at the device are considered aborted + * and the queue for that device is stopped. Now, after + * clearing the device error, we can issue commands to the + * device to interrogate it to find the source of the error. + */ + abort = 1; + + DPRINTK("single device error, CE=0x%x, DE=0x%x\n", + ioread32(hcr_base + CE), ioread32(hcr_base + DE)); + + /* find out the offending link and qc */ + if (ap->nr_pmp_links) { + unsigned int dev_num; + + dereg = ioread32(hcr_base + DE); + iowrite32(dereg, hcr_base + DE); + iowrite32(cereg, hcr_base + CE); + + dev_num = ffs(dereg) - 1; + if (dev_num < ap->nr_pmp_links && dereg != 0) { + link = &ap->pmp_link[dev_num]; + ehi = &link->eh_info; + qc = ata_qc_from_tag(ap, link->active_tag); + /* + * We should consider this as non fatal error, + * and TF must be updated as done below. + */ + + err_mask |= AC_ERR_DEV; + + } else { + err_mask |= AC_ERR_HSM; + action |= ATA_EH_HARDRESET; + freeze = 1; + } + } else { + dereg = ioread32(hcr_base + DE); + iowrite32(dereg, hcr_base + DE); + iowrite32(cereg, hcr_base + CE); + + qc = ata_qc_from_tag(ap, link->active_tag); + /* + * We should consider this as non fatal error, + * and TF must be updated as done below. + */ + err_mask |= AC_ERR_DEV; + } + } + + /* record error info */ + if (qc) + qc->err_mask |= err_mask; + else + ehi->err_mask |= err_mask; + + ehi->action |= action; + + /* freeze or abort */ + if (freeze) + ata_port_freeze(ap); + else if (abort) { + if (qc) + ata_link_abort(qc->dev->link); + else + ata_port_abort(ap); + } +} + +static void sata_fsl_host_intr(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 hstatus, done_mask = 0; + struct ata_queued_cmd *qc; + u32 SError; + u32 tag; + u32 status_mask = INT_ON_ERROR; + + hstatus = ioread32(hcr_base + HSTATUS); + + sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError); + + /* Read command completed register */ + done_mask = ioread32(hcr_base + CC); + + /* Workaround for data length mismatch errata */ + if (unlikely(hstatus & INT_ON_DATA_LENGTH_MISMATCH)) { + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + qc = ata_qc_from_tag(ap, tag); + if (qc && ata_is_atapi(qc->tf.protocol)) { + u32 hcontrol; + /* Set HControl[27] to clear error registers */ + hcontrol = ioread32(hcr_base + HCONTROL); + iowrite32(hcontrol | CLEAR_ERROR, + hcr_base + HCONTROL); + + /* Clear HControl[27] */ + iowrite32(hcontrol & ~CLEAR_ERROR, + hcr_base + HCONTROL); + + /* Clear SError[E] bit */ + sata_fsl_scr_write(&ap->link, SCR_ERROR, + SError); + + /* Ignore fatal error and device error */ + status_mask &= ~(INT_ON_SINGL_DEVICE_ERR + | INT_ON_FATAL_ERR); + break; + } + } + } + + if (unlikely(SError & 0xFFFF0000)) { + DPRINTK("serror @host_intr : 0x%x\n", SError); + sata_fsl_error_intr(ap); + } + + if (unlikely(hstatus & status_mask)) { + DPRINTK("error interrupt!!\n"); + sata_fsl_error_intr(ap); + return; + } + + VPRINTK("Status of all queues :\n"); + VPRINTK("done_mask/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n", + done_mask, + ioread32(hcr_base + CA), + ioread32(hcr_base + CE), + ioread32(hcr_base + CQ), + ap->qc_active); + + if (done_mask & ap->qc_active) { + int i; + /* clear CC bit, this will also complete the interrupt */ + iowrite32(done_mask, hcr_base + CC); + + DPRINTK("Status of all queues :\n"); + DPRINTK("done_mask/CC = 0x%x, CA = 0x%x, CE=0x%x\n", + done_mask, ioread32(hcr_base + CA), + ioread32(hcr_base + CE)); + + for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) { + if (done_mask & (1 << i)) + DPRINTK + ("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n", + i, ioread32(hcr_base + CC), + ioread32(hcr_base + CA)); + } + ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); + return; + + } else if ((ap->qc_active & (1 << ATA_TAG_INTERNAL))) { + iowrite32(1, hcr_base + CC); + qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL); + + DPRINTK("completing non-ncq cmd, CC=0x%x\n", + ioread32(hcr_base + CC)); + + if (qc) { + ata_qc_complete(qc); + } + } else { + /* Spurious Interrupt!! */ + DPRINTK("spurious interrupt!!, CC = 0x%x\n", + ioread32(hcr_base + CC)); + iowrite32(done_mask, hcr_base + CC); + return; + } +} + +static irqreturn_t sata_fsl_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + struct sata_fsl_host_priv *host_priv = host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 interrupt_enables; + unsigned handled = 0; + struct ata_port *ap; + + /* ack. any pending IRQs for this controller/port */ + interrupt_enables = ioread32(hcr_base + HSTATUS); + interrupt_enables &= 0x3F; + + DPRINTK("interrupt status 0x%x\n", interrupt_enables); + + if (!interrupt_enables) + return IRQ_NONE; + + spin_lock(&host->lock); + + /* Assuming one port per host controller */ + + ap = host->ports[0]; + if (ap) { + sata_fsl_host_intr(ap); + } else { + dev_warn(host->dev, "interrupt on disabled port 0\n"); + } + + iowrite32(interrupt_enables, hcr_base + HSTATUS); + handled = 1; + + spin_unlock(&host->lock); + + return IRQ_RETVAL(handled); +} + +/* + * Multiple ports are represented by multiple SATA controllers with + * one port per controller + */ +static int sata_fsl_init_controller(struct ata_host *host) +{ + struct sata_fsl_host_priv *host_priv = host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + /* + * NOTE : We cannot bring the controller online before setting + * the CHBA, hence main controller initialization is done as + * part of the port_start() callback + */ + + /* sata controller to operate in enterprise mode */ + temp = ioread32(hcr_base + HCONTROL); + iowrite32(temp & ~HCONTROL_LEGACY, hcr_base + HCONTROL); + + /* ack. any pending IRQs for this controller/port */ + temp = ioread32(hcr_base + HSTATUS); + if (temp & 0x3F) + iowrite32((temp & 0x3F), hcr_base + HSTATUS); + + /* Keep interrupts disabled on the controller */ + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp & ~0x3F), hcr_base + HCONTROL); + + /* Disable interrupt coalescing control(icc), for the moment */ + DPRINTK("icc = 0x%x\n", ioread32(hcr_base + ICC)); + iowrite32(0x01000000, hcr_base + ICC); + + /* clear error registers, SError is cleared by libATA */ + iowrite32(0x00000FFFF, hcr_base + CE); + iowrite32(0x00000FFFF, hcr_base + DE); + + /* + * reset the number of command complete bits which will cause the + * interrupt to be signaled + */ + fsl_sata_set_irq_coalescing(host, intr_coalescing_count, + intr_coalescing_ticks); + + /* + * host controller will be brought on-line, during xx_port_start() + * callback, that should also initiate the OOB, COMINIT sequence + */ + + DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); + DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); + + return 0; +} + +/* + * scsi mid-layer and libata interface structures + */ +static struct scsi_host_template sata_fsl_sht = { + ATA_NCQ_SHT("sata_fsl"), + .can_queue = SATA_FSL_QUEUE_DEPTH, + .sg_tablesize = SATA_FSL_MAX_PRD_USABLE, + .dma_boundary = ATA_DMA_BOUNDARY, +}; + +static struct ata_port_operations sata_fsl_ops = { + .inherits = &sata_pmp_port_ops, + + .qc_defer = ata_std_qc_defer, + .qc_prep = sata_fsl_qc_prep, + .qc_issue = sata_fsl_qc_issue, + .qc_fill_rtf = sata_fsl_qc_fill_rtf, + + .scr_read = sata_fsl_scr_read, + .scr_write = sata_fsl_scr_write, + + .freeze = sata_fsl_freeze, + .thaw = sata_fsl_thaw, + .softreset = sata_fsl_softreset, + .hardreset = sata_fsl_hardreset, + .pmp_softreset = sata_fsl_softreset, + .error_handler = sata_fsl_error_handler, + .post_internal_cmd = sata_fsl_post_internal_cmd, + + .port_start = sata_fsl_port_start, + .port_stop = sata_fsl_port_stop, + + .pmp_attach = sata_fsl_pmp_attach, + .pmp_detach = sata_fsl_pmp_detach, +}; + +static const struct ata_port_info sata_fsl_port_info[] = { + { + .flags = SATA_FSL_HOST_FLAGS, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &sata_fsl_ops, + }, +}; + +static int sata_fsl_probe(struct platform_device *ofdev) +{ + int retval = -ENXIO; + void __iomem *hcr_base = NULL; + void __iomem *ssr_base = NULL; + void __iomem *csr_base = NULL; + struct sata_fsl_host_priv *host_priv = NULL; + int irq; + struct ata_host *host = NULL; + u32 temp; + + struct ata_port_info pi = sata_fsl_port_info[0]; + const struct ata_port_info *ppi[] = { &pi, NULL }; + + dev_info(&ofdev->dev, "Sata FSL Platform/CSB Driver init\n"); + + hcr_base = of_iomap(ofdev->dev.of_node, 0); + if (!hcr_base) + goto error_exit_with_cleanup; + + ssr_base = hcr_base + 0x100; + csr_base = hcr_base + 0x140; + + if (!of_device_is_compatible(ofdev->dev.of_node, "fsl,mpc8315-sata")) { + temp = ioread32(csr_base + TRANSCFG); + temp = temp & 0xffffffe0; + iowrite32(temp | TRANSCFG_RX_WATER_MARK, csr_base + TRANSCFG); + } + + DPRINTK("@reset i/o = 0x%x\n", ioread32(csr_base + TRANSCFG)); + DPRINTK("sizeof(cmd_desc) = %d\n", sizeof(struct command_desc)); + DPRINTK("sizeof(#define cmd_desc) = %d\n", SATA_FSL_CMD_DESC_SIZE); + + host_priv = kzalloc(sizeof(struct sata_fsl_host_priv), GFP_KERNEL); + if (!host_priv) + goto error_exit_with_cleanup; + + host_priv->hcr_base = hcr_base; + host_priv->ssr_base = ssr_base; + host_priv->csr_base = csr_base; + + irq = irq_of_parse_and_map(ofdev->dev.of_node, 0); + if (!irq) { + dev_err(&ofdev->dev, "invalid irq from platform\n"); + goto error_exit_with_cleanup; + } + host_priv->irq = irq; + + if (of_device_is_compatible(ofdev->dev.of_node, "fsl,pq-sata-v2")) + host_priv->data_snoop = DATA_SNOOP_ENABLE_V2; + else + host_priv->data_snoop = DATA_SNOOP_ENABLE_V1; + + /* allocate host structure */ + host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_FSL_MAX_PORTS); + if (!host) { + retval = -ENOMEM; + goto error_exit_with_cleanup; + } + + /* host->iomap is not used currently */ + host->private_data = host_priv; + + /* initialize host controller */ + sata_fsl_init_controller(host); + + /* + * Now, register with libATA core, this will also initiate the + * device discovery process, invoking our port_start() handler & + * error_handler() to execute a dummy Softreset EH session + */ + ata_host_activate(host, irq, sata_fsl_interrupt, SATA_FSL_IRQ_FLAG, + &sata_fsl_sht); + + platform_set_drvdata(ofdev, host); + + host_priv->intr_coalescing.show = fsl_sata_intr_coalescing_show; + host_priv->intr_coalescing.store = fsl_sata_intr_coalescing_store; + sysfs_attr_init(&host_priv->intr_coalescing.attr); + host_priv->intr_coalescing.attr.name = "intr_coalescing"; + host_priv->intr_coalescing.attr.mode = S_IRUGO | S_IWUSR; + retval = device_create_file(host->dev, &host_priv->intr_coalescing); + if (retval) + goto error_exit_with_cleanup; + + host_priv->rx_watermark.show = fsl_sata_rx_watermark_show; + host_priv->rx_watermark.store = fsl_sata_rx_watermark_store; + sysfs_attr_init(&host_priv->rx_watermark.attr); + host_priv->rx_watermark.attr.name = "rx_watermark"; + host_priv->rx_watermark.attr.mode = S_IRUGO | S_IWUSR; + retval = device_create_file(host->dev, &host_priv->rx_watermark); + if (retval) { + device_remove_file(&ofdev->dev, &host_priv->intr_coalescing); + goto error_exit_with_cleanup; + } + + return 0; + +error_exit_with_cleanup: + + if (host) + ata_host_detach(host); + + if (hcr_base) + iounmap(hcr_base); + kfree(host_priv); + + return retval; +} + +static int sata_fsl_remove(struct platform_device *ofdev) +{ + struct ata_host *host = platform_get_drvdata(ofdev); + struct sata_fsl_host_priv *host_priv = host->private_data; + + device_remove_file(&ofdev->dev, &host_priv->intr_coalescing); + device_remove_file(&ofdev->dev, &host_priv->rx_watermark); + + ata_host_detach(host); + + irq_dispose_mapping(host_priv->irq); + iounmap(host_priv->hcr_base); + kfree(host_priv); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sata_fsl_suspend(struct platform_device *op, pm_message_t state) +{ + struct ata_host *host = platform_get_drvdata(op); + return ata_host_suspend(host, state); +} + +static int sata_fsl_resume(struct platform_device *op) +{ + struct ata_host *host = platform_get_drvdata(op); + struct sata_fsl_host_priv *host_priv = host->private_data; + int ret; + void __iomem *hcr_base = host_priv->hcr_base; + struct ata_port *ap = host->ports[0]; + struct sata_fsl_port_priv *pp = ap->private_data; + + ret = sata_fsl_init_controller(host); + if (ret) { + dev_err(&op->dev, "Error initializing hardware\n"); + return ret; + } + + /* Recovery the CHBA register in host controller cmd register set */ + iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA); + + iowrite32((ioread32(hcr_base + HCONTROL) + | HCONTROL_ONLINE_PHY_RST + | HCONTROL_SNOOP_ENABLE + | HCONTROL_PMP_ATTACHED), + hcr_base + HCONTROL); + + ata_host_resume(host); + return 0; +} +#endif + +static struct of_device_id fsl_sata_match[] = { + { + .compatible = "fsl,pq-sata", + }, + { + .compatible = "fsl,pq-sata-v2", + }, + {}, +}; + +MODULE_DEVICE_TABLE(of, fsl_sata_match); + +static struct platform_driver fsl_sata_driver = { + .driver = { + .name = "fsl-sata", + .of_match_table = fsl_sata_match, + }, + .probe = sata_fsl_probe, + .remove = sata_fsl_remove, +#ifdef CONFIG_PM_SLEEP + .suspend = sata_fsl_suspend, + .resume = sata_fsl_resume, +#endif +}; + +module_platform_driver(fsl_sata_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ashish Kalra, Freescale Semiconductor"); +MODULE_DESCRIPTION("Freescale 3.0Gbps SATA controller low level driver"); +MODULE_VERSION("1.10"); diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c new file mode 100644 index 000000000..a2adf3f56 --- /dev/null +++ b/drivers/ata/sata_highbank.c @@ -0,0 +1,652 @@ +/* + * Calxeda Highbank AHCI SATA platform driver + * Copyright 2012 Calxeda, Inc. + * + * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ahci.h" + +#define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f)) +#define CPHY_ADDR(addr) (((addr) & 0x1ff) << 2) +#define SERDES_CR_CTL 0x80a0 +#define SERDES_CR_ADDR 0x80a1 +#define SERDES_CR_DATA 0x80a2 +#define CR_BUSY 0x0001 +#define CR_START 0x0001 +#define CR_WR_RDN 0x0002 +#define CPHY_TX_INPUT_STS 0x2001 +#define CPHY_RX_INPUT_STS 0x2002 +#define CPHY_SATA_TX_OVERRIDE 0x8000 +#define CPHY_SATA_RX_OVERRIDE 0x4000 +#define CPHY_TX_OVERRIDE 0x2004 +#define CPHY_RX_OVERRIDE 0x2005 +#define SPHY_LANE 0x100 +#define SPHY_HALF_RATE 0x0001 +#define CPHY_SATA_DPLL_MODE 0x0700 +#define CPHY_SATA_DPLL_SHIFT 8 +#define CPHY_SATA_DPLL_RESET (1 << 11) +#define CPHY_SATA_TX_ATTEN 0x1c00 +#define CPHY_SATA_TX_ATTEN_SHIFT 10 +#define CPHY_PHY_COUNT 6 +#define CPHY_LANE_COUNT 4 +#define CPHY_PORT_COUNT (CPHY_PHY_COUNT * CPHY_LANE_COUNT) + +static DEFINE_SPINLOCK(cphy_lock); +/* Each of the 6 phys can have up to 4 sata ports attached to i. Map 0-based + * sata ports to their phys and then to their lanes within the phys + */ +struct phy_lane_info { + void __iomem *phy_base; + u8 lane_mapping; + u8 phy_devs; + u8 tx_atten; +}; +static struct phy_lane_info port_data[CPHY_PORT_COUNT]; + +static DEFINE_SPINLOCK(sgpio_lock); +#define SCLOCK 0 +#define SLOAD 1 +#define SDATA 2 +#define SGPIO_PINS 3 +#define SGPIO_PORTS 8 + +struct ecx_plat_data { + u32 n_ports; + /* number of extra clocks that the SGPIO PIC controller expects */ + u32 pre_clocks; + u32 post_clocks; + unsigned sgpio_gpio[SGPIO_PINS]; + u32 sgpio_pattern; + u32 port_to_sgpio[SGPIO_PORTS]; +}; + +#define SGPIO_SIGNALS 3 +#define ECX_ACTIVITY_BITS 0x300000 +#define ECX_ACTIVITY_SHIFT 0 +#define ECX_LOCATE_BITS 0x80000 +#define ECX_LOCATE_SHIFT 1 +#define ECX_FAULT_BITS 0x400000 +#define ECX_FAULT_SHIFT 2 +static inline int sgpio_bit_shift(struct ecx_plat_data *pdata, u32 port, + u32 shift) +{ + return 1 << (3 * pdata->port_to_sgpio[port] + shift); +} + +static void ecx_parse_sgpio(struct ecx_plat_data *pdata, u32 port, u32 state) +{ + if (state & ECX_ACTIVITY_BITS) + pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port, + ECX_ACTIVITY_SHIFT); + else + pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port, + ECX_ACTIVITY_SHIFT); + if (state & ECX_LOCATE_BITS) + pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port, + ECX_LOCATE_SHIFT); + else + pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port, + ECX_LOCATE_SHIFT); + if (state & ECX_FAULT_BITS) + pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port, + ECX_FAULT_SHIFT); + else + pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port, + ECX_FAULT_SHIFT); +} + +/* + * Tell the LED controller that the signal has changed by raising the clock + * line for 50 uS and then lowering it for 50 uS. + */ +static void ecx_led_cycle_clock(struct ecx_plat_data *pdata) +{ + gpio_set_value(pdata->sgpio_gpio[SCLOCK], 1); + udelay(50); + gpio_set_value(pdata->sgpio_gpio[SCLOCK], 0); + udelay(50); +} + +static ssize_t ecx_transmit_led_message(struct ata_port *ap, u32 state, + ssize_t size) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ecx_plat_data *pdata = hpriv->plat_data; + struct ahci_port_priv *pp = ap->private_data; + unsigned long flags; + int pmp, i; + struct ahci_em_priv *emp; + u32 sgpio_out; + + /* get the slot number from the message */ + pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; + if (pmp < EM_MAX_SLOTS) + emp = &pp->em_priv[pmp]; + else + return -EINVAL; + + if (!(hpriv->em_msg_type & EM_MSG_TYPE_LED)) + return size; + + spin_lock_irqsave(&sgpio_lock, flags); + ecx_parse_sgpio(pdata, ap->port_no, state); + sgpio_out = pdata->sgpio_pattern; + for (i = 0; i < pdata->pre_clocks; i++) + ecx_led_cycle_clock(pdata); + + gpio_set_value(pdata->sgpio_gpio[SLOAD], 1); + ecx_led_cycle_clock(pdata); + gpio_set_value(pdata->sgpio_gpio[SLOAD], 0); + /* + * bit-bang out the SGPIO pattern, by consuming a bit and then + * clocking it out. + */ + for (i = 0; i < (SGPIO_SIGNALS * pdata->n_ports); i++) { + gpio_set_value(pdata->sgpio_gpio[SDATA], sgpio_out & 1); + sgpio_out >>= 1; + ecx_led_cycle_clock(pdata); + } + for (i = 0; i < pdata->post_clocks; i++) + ecx_led_cycle_clock(pdata); + + /* save off new led state for port/slot */ + emp->led_state = state; + + spin_unlock_irqrestore(&sgpio_lock, flags); + return size; +} + +static void highbank_set_em_messages(struct device *dev, + struct ahci_host_priv *hpriv, + struct ata_port_info *pi) +{ + struct device_node *np = dev->of_node; + struct ecx_plat_data *pdata = hpriv->plat_data; + int i; + int err; + + for (i = 0; i < SGPIO_PINS; i++) { + err = of_get_named_gpio(np, "calxeda,sgpio-gpio", i); + if (IS_ERR_VALUE(err)) + return; + + pdata->sgpio_gpio[i] = err; + err = gpio_request(pdata->sgpio_gpio[i], "CX SGPIO"); + if (err) { + pr_err("sata_highbank gpio_request %d failed: %d\n", + i, err); + return; + } + gpio_direction_output(pdata->sgpio_gpio[i], 1); + } + of_property_read_u32_array(np, "calxeda,led-order", + pdata->port_to_sgpio, + pdata->n_ports); + if (of_property_read_u32(np, "calxeda,pre-clocks", &pdata->pre_clocks)) + pdata->pre_clocks = 0; + if (of_property_read_u32(np, "calxeda,post-clocks", + &pdata->post_clocks)) + pdata->post_clocks = 0; + + /* store em_loc */ + hpriv->em_loc = 0; + hpriv->em_buf_sz = 4; + hpriv->em_msg_type = EM_MSG_TYPE_LED; + pi->flags |= ATA_FLAG_EM | ATA_FLAG_SW_ACTIVITY; +} + +static u32 __combo_phy_reg_read(u8 sata_port, u32 addr) +{ + u32 data; + u8 dev = port_data[sata_port].phy_devs; + spin_lock(&cphy_lock); + writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800); + data = readl(port_data[sata_port].phy_base + CPHY_ADDR(addr)); + spin_unlock(&cphy_lock); + return data; +} + +static void __combo_phy_reg_write(u8 sata_port, u32 addr, u32 data) +{ + u8 dev = port_data[sata_port].phy_devs; + spin_lock(&cphy_lock); + writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800); + writel(data, port_data[sata_port].phy_base + CPHY_ADDR(addr)); + spin_unlock(&cphy_lock); +} + +static void combo_phy_wait_for_ready(u8 sata_port) +{ + while (__combo_phy_reg_read(sata_port, SERDES_CR_CTL) & CR_BUSY) + udelay(5); +} + +static u32 combo_phy_read(u8 sata_port, u32 addr) +{ + combo_phy_wait_for_ready(sata_port); + __combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr); + __combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_START); + combo_phy_wait_for_ready(sata_port); + return __combo_phy_reg_read(sata_port, SERDES_CR_DATA); +} + +static void combo_phy_write(u8 sata_port, u32 addr, u32 data) +{ + combo_phy_wait_for_ready(sata_port); + __combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr); + __combo_phy_reg_write(sata_port, SERDES_CR_DATA, data); + __combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_WR_RDN | CR_START); +} + +static void highbank_cphy_disable_overrides(u8 sata_port) +{ + u8 lane = port_data[sata_port].lane_mapping; + u32 tmp; + if (unlikely(port_data[sata_port].phy_base == NULL)) + return; + tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE); + tmp &= ~CPHY_SATA_RX_OVERRIDE; + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); +} + +static void cphy_override_tx_attenuation(u8 sata_port, u32 val) +{ + u8 lane = port_data[sata_port].lane_mapping; + u32 tmp; + + if (val & 0x8) + return; + + tmp = combo_phy_read(sata_port, CPHY_TX_INPUT_STS + lane * SPHY_LANE); + tmp &= ~CPHY_SATA_TX_OVERRIDE; + combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp |= CPHY_SATA_TX_OVERRIDE; + combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp |= (val << CPHY_SATA_TX_ATTEN_SHIFT) & CPHY_SATA_TX_ATTEN; + combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp); +} + +static void cphy_override_rx_mode(u8 sata_port, u32 val) +{ + u8 lane = port_data[sata_port].lane_mapping; + u32 tmp; + tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE); + tmp &= ~CPHY_SATA_RX_OVERRIDE; + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp |= CPHY_SATA_RX_OVERRIDE; + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp &= ~CPHY_SATA_DPLL_MODE; + tmp |= val << CPHY_SATA_DPLL_SHIFT; + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp |= CPHY_SATA_DPLL_RESET; + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp &= ~CPHY_SATA_DPLL_RESET; + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); + + msleep(15); +} + +static void highbank_cphy_override_lane(u8 sata_port) +{ + u8 lane = port_data[sata_port].lane_mapping; + u32 tmp, k = 0; + + if (unlikely(port_data[sata_port].phy_base == NULL)) + return; + do { + tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + + lane * SPHY_LANE); + } while ((tmp & SPHY_HALF_RATE) && (k++ < 1000)); + cphy_override_rx_mode(sata_port, 3); + cphy_override_tx_attenuation(sata_port, port_data[sata_port].tx_atten); +} + +static int highbank_initialize_phys(struct device *dev, void __iomem *addr) +{ + struct device_node *sata_node = dev->of_node; + int phy_count = 0, phy, port = 0, i; + void __iomem *cphy_base[CPHY_PHY_COUNT] = {}; + struct device_node *phy_nodes[CPHY_PHY_COUNT] = {}; + u32 tx_atten[CPHY_PORT_COUNT] = {}; + + memset(port_data, 0, sizeof(struct phy_lane_info) * CPHY_PORT_COUNT); + + do { + u32 tmp; + struct of_phandle_args phy_data; + if (of_parse_phandle_with_args(sata_node, + "calxeda,port-phys", "#phy-cells", + port, &phy_data)) + break; + for (phy = 0; phy < phy_count; phy++) { + if (phy_nodes[phy] == phy_data.np) + break; + } + if (phy_nodes[phy] == NULL) { + phy_nodes[phy] = phy_data.np; + cphy_base[phy] = of_iomap(phy_nodes[phy], 0); + if (cphy_base[phy] == NULL) { + return 0; + } + phy_count += 1; + } + port_data[port].lane_mapping = phy_data.args[0]; + of_property_read_u32(phy_nodes[phy], "phydev", &tmp); + port_data[port].phy_devs = tmp; + port_data[port].phy_base = cphy_base[phy]; + of_node_put(phy_data.np); + port += 1; + } while (port < CPHY_PORT_COUNT); + of_property_read_u32_array(sata_node, "calxeda,tx-atten", + tx_atten, port); + for (i = 0; i < port; i++) + port_data[i].tx_atten = (u8) tx_atten[i]; + return 0; +} + +/* + * The Calxeda SATA phy intermittently fails to bring up a link with Gen3 + * Retrying the phy hard reset can work around the issue, but the drive + * may fail again. In less than 150 out of 15000 test runs, it took more + * than 10 tries for the link to be established (but never more than 35). + * Triple the maximum observed retry count to provide plenty of margin for + * rare events and to guarantee that the link is established. + * + * Also, the default 2 second time-out on a failed drive is too long in + * this situation. The uboot implementation of the same driver function + * uses a much shorter time-out period and never experiences a time out + * issue. Reducing the time-out to 500ms improves the responsiveness. + * The other timing constants were kept the same as the stock AHCI driver. + * This change was also tested 15000 times on 24 drives and none of them + * experienced a time out. + */ +static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + static const unsigned long timing[] = { 5, 100, 500}; + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + struct ata_taskfile tf; + bool online; + u32 sstatus; + int rc; + int retry = 100; + + ahci_stop_engine(ap); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.command = ATA_BUSY; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); + + do { + highbank_cphy_disable_overrides(link->ap->port_no); + rc = sata_link_hardreset(link, timing, deadline, &online, NULL); + highbank_cphy_override_lane(link->ap->port_no); + + /* If the status is 1, we are connected, but the link did not + * come up. So retry resetting the link again. + */ + if (sata_scr_read(link, SCR_STATUS, &sstatus)) + break; + if (!(sstatus & 0x3)) + break; + } while (!online && retry--); + + hpriv->start_engine(ap); + + if (online) + *class = ahci_dev_classify(ap); + + return rc; +} + +static struct ata_port_operations ahci_highbank_ops = { + .inherits = &ahci_ops, + .hardreset = ahci_highbank_hardreset, + .transmit_led_message = ecx_transmit_led_message, +}; + +static const struct ata_port_info ahci_highbank_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_highbank_ops, +}; + +static struct scsi_host_template ahci_highbank_platform_sht = { + AHCI_SHT("sata_highbank"), +}; + +static const struct of_device_id ahci_of_match[] = { + { .compatible = "calxeda,hb-ahci" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ahci_of_match); + +static int ahci_highbank_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + struct ecx_plat_data *pdata; + struct ata_host *host; + struct resource *mem; + int irq; + int i; + int rc; + u32 n_ports; + struct ata_port_info pi = ahci_highbank_port_info; + const struct ata_port_info *ppi[] = { &pi, NULL }; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(dev, "no mmio space\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(dev, "no irq\n"); + return -EINVAL; + } + + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) { + dev_err(dev, "can't alloc ahci_host_priv\n"); + return -ENOMEM; + } + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "can't alloc ecx_plat_data\n"); + return -ENOMEM; + } + + hpriv->flags |= (unsigned long)pi.private_data; + + hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem)); + if (!hpriv->mmio) { + dev_err(dev, "can't map %pR\n", mem); + return -ENOMEM; + } + + rc = highbank_initialize_phys(dev, hpriv->mmio); + if (rc) + return rc; + + + ahci_save_initial_config(dev, hpriv); + + /* prepare host */ + if (hpriv->cap & HOST_CAP_NCQ) + pi.flags |= ATA_FLAG_NCQ; + + if (hpriv->cap & HOST_CAP_PMP) + pi.flags |= ATA_FLAG_PMP; + + if (hpriv->cap & HOST_CAP_64) + dma_set_coherent_mask(dev, DMA_BIT_MASK(64)); + + /* CAP.NP sometimes indicate the index of the last enabled + * port, at other times, that of the last possible port, so + * determining the maximum port number requires looking at + * both CAP.NP and port_map. + */ + n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); + + pdata->n_ports = n_ports; + hpriv->plat_data = pdata; + highbank_set_em_messages(dev, hpriv, &pi); + + host = ata_host_alloc_pinfo(dev, ppi, n_ports); + if (!host) { + rc = -ENOMEM; + goto err0; + } + + host->private_data = hpriv; + + if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) + host->flags |= ATA_HOST_PARALLEL_SCAN; + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + ata_port_desc(ap, "mmio %pR", mem); + ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); + + /* set enclosure management message type */ + if (ap->flags & ATA_FLAG_EM) + ap->em_message_type = hpriv->em_msg_type; + + rc = ahci_setup_port_privdata(ap); + if (rc) + goto err0; + + /* disabled/not-implemented port */ + if (!(hpriv->port_map & (1 << i))) + ap->ops = &ata_dummy_port_ops; + } + + rc = ahci_reset_controller(host); + if (rc) + goto err0; + + ahci_init_controller(host); + ahci_print_info(host, "platform"); + + rc = ahci_host_activate(host, irq, &ahci_highbank_platform_sht); + if (rc) + goto err0; + + return 0; +err0: + return rc; +} + +#ifdef CONFIG_PM_SLEEP +static int ahci_highbank_suspend(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->mmio; + u32 ctl; + int rc; + + if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { + dev_err(dev, "firmware update required for suspend/resume\n"); + return -EIO; + } + + /* + * AHCI spec rev1.1 section 8.3.3: + * Software must disable interrupts prior to requesting a + * transition of the HBA to D3 state. + */ + ctl = readl(mmio + HOST_CTL); + ctl &= ~HOST_IRQ_EN; + writel(ctl, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + + rc = ata_host_suspend(host, PMSG_SUSPEND); + if (rc) + return rc; + + return 0; +} + +static int ahci_highbank_resume(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + int rc; + + if (dev->power.power_state.event == PM_EVENT_SUSPEND) { + rc = ahci_reset_controller(host); + if (rc) + return rc; + + ahci_init_controller(host); + } + + ata_host_resume(host); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(ahci_highbank_pm_ops, + ahci_highbank_suspend, ahci_highbank_resume); + +static struct platform_driver ahci_highbank_driver = { + .remove = ata_platform_remove_one, + .driver = { + .name = "highbank-ahci", + .of_match_table = ahci_of_match, + .pm = &ahci_highbank_pm_ops, + }, + .probe = ahci_highbank_probe, +}; + +module_platform_driver(ahci_highbank_driver); + +MODULE_DESCRIPTION("Calxeda Highbank AHCI SATA platform driver"); +MODULE_AUTHOR("Mark Langsdorf "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("sata:highbank"); diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c new file mode 100644 index 000000000..e81a8217f --- /dev/null +++ b/drivers/ata/sata_inic162x.c @@ -0,0 +1,915 @@ +/* + * sata_inic162x.c - Driver for Initio 162x SATA controllers + * + * Copyright 2006 SUSE Linux Products GmbH + * Copyright 2006 Tejun Heo + * + * This file is released under GPL v2. + * + * **** WARNING **** + * + * This driver never worked properly and unfortunately data corruption is + * relatively common. There isn't anyone working on the driver and there's + * no support from the vendor. Do not use this driver in any production + * environment. + * + * http://thread.gmane.org/gmane.linux.debian.devel.bugs.rc/378525/focus=54491 + * https://bugzilla.kernel.org/show_bug.cgi?id=60565 + * + * ***************** + * + * This controller is eccentric and easily locks up if something isn't + * right. Documentation is available at initio's website but it only + * documents registers (not programming model). + * + * This driver has interesting history. The first version was written + * from the documentation and a 2.4 IDE driver posted on a Taiwan + * company, which didn't use any IDMA features and couldn't handle + * LBA48. The resulting driver couldn't handle LBA48 devices either + * making it pretty useless. + * + * After a while, initio picked the driver up, renamed it to + * sata_initio162x, updated it to use IDMA for ATA DMA commands and + * posted it on their website. It only used ATA_PROT_DMA for IDMA and + * attaching both devices and issuing IDMA and !IDMA commands + * simultaneously broke it due to PIRQ masking interaction but it did + * show how to use the IDMA (ADMA + some initio specific twists) + * engine. + * + * Then, I picked up their changes again and here's the usable driver + * which uses IDMA for everything. Everything works now including + * LBA48, CD/DVD burning, suspend/resume and hotplug. There are some + * issues tho. Result Tf is not resported properly, NCQ isn't + * supported yet and CD/DVD writing works with DMA assisted PIO + * protocol (which, for native SATA devices, shouldn't cause any + * noticeable difference). + * + * Anyways, so, here's finally a working driver for inic162x. Enjoy! + * + * initio: If you guys wanna improve the driver regarding result TF + * access and other stuff, please feel free to contact me. I'll be + * happy to assist. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_inic162x" +#define DRV_VERSION "0.4" + +enum { + MMIO_BAR_PCI = 5, + MMIO_BAR_CARDBUS = 1, + + NR_PORTS = 2, + + IDMA_CPB_TBL_SIZE = 4 * 32, + + INIC_DMA_BOUNDARY = 0xffffff, + + HOST_ACTRL = 0x08, + HOST_CTL = 0x7c, + HOST_STAT = 0x7e, + HOST_IRQ_STAT = 0xbc, + HOST_IRQ_MASK = 0xbe, + + PORT_SIZE = 0x40, + + /* registers for ATA TF operation */ + PORT_TF_DATA = 0x00, + PORT_TF_FEATURE = 0x01, + PORT_TF_NSECT = 0x02, + PORT_TF_LBAL = 0x03, + PORT_TF_LBAM = 0x04, + PORT_TF_LBAH = 0x05, + PORT_TF_DEVICE = 0x06, + PORT_TF_COMMAND = 0x07, + PORT_TF_ALT_STAT = 0x08, + PORT_IRQ_STAT = 0x09, + PORT_IRQ_MASK = 0x0a, + PORT_PRD_CTL = 0x0b, + PORT_PRD_ADDR = 0x0c, + PORT_PRD_XFERLEN = 0x10, + PORT_CPB_CPBLAR = 0x18, + PORT_CPB_PTQFIFO = 0x1c, + + /* IDMA register */ + PORT_IDMA_CTL = 0x14, + PORT_IDMA_STAT = 0x16, + + PORT_RPQ_FIFO = 0x1e, + PORT_RPQ_CNT = 0x1f, + + PORT_SCR = 0x20, + + /* HOST_CTL bits */ + HCTL_LEDEN = (1 << 3), /* enable LED operation */ + HCTL_IRQOFF = (1 << 8), /* global IRQ off */ + HCTL_FTHD0 = (1 << 10), /* fifo threshold 0 */ + HCTL_FTHD1 = (1 << 11), /* fifo threshold 1*/ + HCTL_PWRDWN = (1 << 12), /* power down PHYs */ + HCTL_SOFTRST = (1 << 13), /* global reset (no phy reset) */ + HCTL_RPGSEL = (1 << 15), /* register page select */ + + HCTL_KNOWN_BITS = HCTL_IRQOFF | HCTL_PWRDWN | HCTL_SOFTRST | + HCTL_RPGSEL, + + /* HOST_IRQ_(STAT|MASK) bits */ + HIRQ_PORT0 = (1 << 0), + HIRQ_PORT1 = (1 << 1), + HIRQ_SOFT = (1 << 14), + HIRQ_GLOBAL = (1 << 15), /* STAT only */ + + /* PORT_IRQ_(STAT|MASK) bits */ + PIRQ_OFFLINE = (1 << 0), /* device unplugged */ + PIRQ_ONLINE = (1 << 1), /* device plugged */ + PIRQ_COMPLETE = (1 << 2), /* completion interrupt */ + PIRQ_FATAL = (1 << 3), /* fatal error */ + PIRQ_ATA = (1 << 4), /* ATA interrupt */ + PIRQ_REPLY = (1 << 5), /* reply FIFO not empty */ + PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */ + + PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL, + PIRQ_MASK_DEFAULT = PIRQ_REPLY | PIRQ_ATA, + PIRQ_MASK_FREEZE = 0xff, + + /* PORT_PRD_CTL bits */ + PRD_CTL_START = (1 << 0), + PRD_CTL_WR = (1 << 3), + PRD_CTL_DMAEN = (1 << 7), /* DMA enable */ + + /* PORT_IDMA_CTL bits */ + IDMA_CTL_RST_ATA = (1 << 2), /* hardreset ATA bus */ + IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */ + IDMA_CTL_GO = (1 << 7), /* IDMA mode go */ + IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */ + + /* PORT_IDMA_STAT bits */ + IDMA_STAT_PERR = (1 << 0), /* PCI ERROR MODE */ + IDMA_STAT_CPBERR = (1 << 1), /* ADMA CPB error */ + IDMA_STAT_LGCY = (1 << 3), /* ADMA legacy */ + IDMA_STAT_UIRQ = (1 << 4), /* ADMA unsolicited irq */ + IDMA_STAT_STPD = (1 << 5), /* ADMA stopped */ + IDMA_STAT_PSD = (1 << 6), /* ADMA pause */ + IDMA_STAT_DONE = (1 << 7), /* ADMA done */ + + IDMA_STAT_ERR = IDMA_STAT_PERR | IDMA_STAT_CPBERR, + + /* CPB Control Flags*/ + CPB_CTL_VALID = (1 << 0), /* CPB valid */ + CPB_CTL_QUEUED = (1 << 1), /* queued command */ + CPB_CTL_DATA = (1 << 2), /* data, rsvd in datasheet */ + CPB_CTL_IEN = (1 << 3), /* PCI interrupt enable */ + CPB_CTL_DEVDIR = (1 << 4), /* device direction control */ + + /* CPB Response Flags */ + CPB_RESP_DONE = (1 << 0), /* ATA command complete */ + CPB_RESP_REL = (1 << 1), /* ATA release */ + CPB_RESP_IGNORED = (1 << 2), /* CPB ignored */ + CPB_RESP_ATA_ERR = (1 << 3), /* ATA command error */ + CPB_RESP_SPURIOUS = (1 << 4), /* ATA spurious interrupt error */ + CPB_RESP_UNDERFLOW = (1 << 5), /* APRD deficiency length error */ + CPB_RESP_OVERFLOW = (1 << 6), /* APRD exccess length error */ + CPB_RESP_CPB_ERR = (1 << 7), /* CPB error flag */ + + /* PRD Control Flags */ + PRD_DRAIN = (1 << 1), /* ignore data excess */ + PRD_CDB = (1 << 2), /* atapi packet command pointer */ + PRD_DIRECT_INTR = (1 << 3), /* direct interrupt */ + PRD_DMA = (1 << 4), /* data transfer method */ + PRD_WRITE = (1 << 5), /* data dir, rsvd in datasheet */ + PRD_IOM = (1 << 6), /* io/memory transfer */ + PRD_END = (1 << 7), /* APRD chain end */ +}; + +/* Comman Parameter Block */ +struct inic_cpb { + u8 resp_flags; /* Response Flags */ + u8 error; /* ATA Error */ + u8 status; /* ATA Status */ + u8 ctl_flags; /* Control Flags */ + __le32 len; /* Total Transfer Length */ + __le32 prd; /* First PRD pointer */ + u8 rsvd[4]; + /* 16 bytes */ + u8 feature; /* ATA Feature */ + u8 hob_feature; /* ATA Ex. Feature */ + u8 device; /* ATA Device/Head */ + u8 mirctl; /* Mirror Control */ + u8 nsect; /* ATA Sector Count */ + u8 hob_nsect; /* ATA Ex. Sector Count */ + u8 lbal; /* ATA Sector Number */ + u8 hob_lbal; /* ATA Ex. Sector Number */ + u8 lbam; /* ATA Cylinder Low */ + u8 hob_lbam; /* ATA Ex. Cylinder Low */ + u8 lbah; /* ATA Cylinder High */ + u8 hob_lbah; /* ATA Ex. Cylinder High */ + u8 command; /* ATA Command */ + u8 ctl; /* ATA Control */ + u8 slave_error; /* Slave ATA Error */ + u8 slave_status; /* Slave ATA Status */ + /* 32 bytes */ +} __packed; + +/* Physical Region Descriptor */ +struct inic_prd { + __le32 mad; /* Physical Memory Address */ + __le16 len; /* Transfer Length */ + u8 rsvd; + u8 flags; /* Control Flags */ +} __packed; + +struct inic_pkt { + struct inic_cpb cpb; + struct inic_prd prd[LIBATA_MAX_PRD + 1]; /* + 1 for cdb */ + u8 cdb[ATAPI_CDB_LEN]; +} __packed; + +struct inic_host_priv { + void __iomem *mmio_base; + u16 cached_hctl; +}; + +struct inic_port_priv { + struct inic_pkt *pkt; + dma_addr_t pkt_dma; + u32 *cpb_tbl; + dma_addr_t cpb_tbl_dma; +}; + +static struct scsi_host_template inic_sht = { + ATA_BASE_SHT(DRV_NAME), + .sg_tablesize = LIBATA_MAX_PRD, /* maybe it can be larger? */ + .dma_boundary = INIC_DMA_BOUNDARY, +}; + +static const int scr_map[] = { + [SCR_STATUS] = 0, + [SCR_ERROR] = 1, + [SCR_CONTROL] = 2, +}; + +static void __iomem *inic_port_base(struct ata_port *ap) +{ + struct inic_host_priv *hpriv = ap->host->private_data; + + return hpriv->mmio_base + ap->port_no * PORT_SIZE; +} + +static void inic_reset_port(void __iomem *port_base) +{ + void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; + + /* stop IDMA engine */ + readw(idma_ctl); /* flush */ + msleep(1); + + /* mask IRQ and assert reset */ + writew(IDMA_CTL_RST_IDMA, idma_ctl); + readw(idma_ctl); /* flush */ + msleep(1); + + /* release reset */ + writew(0, idma_ctl); + + /* clear irq */ + writeb(0xff, port_base + PORT_IRQ_STAT); +} + +static int inic_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val) +{ + void __iomem *scr_addr = inic_port_base(link->ap) + PORT_SCR; + + if (unlikely(sc_reg >= ARRAY_SIZE(scr_map))) + return -EINVAL; + + *val = readl(scr_addr + scr_map[sc_reg] * 4); + + /* this controller has stuck DIAG.N, ignore it */ + if (sc_reg == SCR_ERROR) + *val &= ~SERR_PHYRDY_CHG; + return 0; +} + +static int inic_scr_write(struct ata_link *link, unsigned sc_reg, u32 val) +{ + void __iomem *scr_addr = inic_port_base(link->ap) + PORT_SCR; + + if (unlikely(sc_reg >= ARRAY_SIZE(scr_map))) + return -EINVAL; + + writel(val, scr_addr + scr_map[sc_reg] * 4); + return 0; +} + +static void inic_stop_idma(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + + readb(port_base + PORT_RPQ_FIFO); + readb(port_base + PORT_RPQ_CNT); + writew(0, port_base + PORT_IDMA_CTL); +} + +static void inic_host_err_intr(struct ata_port *ap, u8 irq_stat, u16 idma_stat) +{ + struct ata_eh_info *ehi = &ap->link.eh_info; + struct inic_port_priv *pp = ap->private_data; + struct inic_cpb *cpb = &pp->pkt->cpb; + bool freeze = false; + + ata_ehi_clear_desc(ehi); + ata_ehi_push_desc(ehi, "irq_stat=0x%x idma_stat=0x%x", + irq_stat, idma_stat); + + inic_stop_idma(ap); + + if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) { + ata_ehi_push_desc(ehi, "hotplug"); + ata_ehi_hotplugged(ehi); + freeze = true; + } + + if (idma_stat & IDMA_STAT_PERR) { + ata_ehi_push_desc(ehi, "PCI error"); + freeze = true; + } + + if (idma_stat & IDMA_STAT_CPBERR) { + ata_ehi_push_desc(ehi, "CPB error"); + + if (cpb->resp_flags & CPB_RESP_IGNORED) { + __ata_ehi_push_desc(ehi, " ignored"); + ehi->err_mask |= AC_ERR_INVALID; + freeze = true; + } + + if (cpb->resp_flags & CPB_RESP_ATA_ERR) + ehi->err_mask |= AC_ERR_DEV; + + if (cpb->resp_flags & CPB_RESP_SPURIOUS) { + __ata_ehi_push_desc(ehi, " spurious-intr"); + ehi->err_mask |= AC_ERR_HSM; + freeze = true; + } + + if (cpb->resp_flags & + (CPB_RESP_UNDERFLOW | CPB_RESP_OVERFLOW)) { + __ata_ehi_push_desc(ehi, " data-over/underflow"); + ehi->err_mask |= AC_ERR_HSM; + freeze = true; + } + } + + if (freeze) + ata_port_freeze(ap); + else + ata_port_abort(ap); +} + +static void inic_host_intr(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); + u8 irq_stat; + u16 idma_stat; + + /* read and clear IRQ status */ + irq_stat = readb(port_base + PORT_IRQ_STAT); + writeb(irq_stat, port_base + PORT_IRQ_STAT); + idma_stat = readw(port_base + PORT_IDMA_STAT); + + if (unlikely((irq_stat & PIRQ_ERR) || (idma_stat & IDMA_STAT_ERR))) + inic_host_err_intr(ap, irq_stat, idma_stat); + + if (unlikely(!qc)) + goto spurious; + + if (likely(idma_stat & IDMA_STAT_DONE)) { + inic_stop_idma(ap); + + /* Depending on circumstances, device error + * isn't reported by IDMA, check it explicitly. + */ + if (unlikely(readb(port_base + PORT_TF_COMMAND) & + (ATA_DF | ATA_ERR))) + qc->err_mask |= AC_ERR_DEV; + + ata_qc_complete(qc); + return; + } + + spurious: + ata_port_warn(ap, "unhandled interrupt: cmd=0x%x irq_stat=0x%x idma_stat=0x%x\n", + qc ? qc->tf.command : 0xff, irq_stat, idma_stat); +} + +static irqreturn_t inic_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + struct inic_host_priv *hpriv = host->private_data; + u16 host_irq_stat; + int i, handled = 0; + + host_irq_stat = readw(hpriv->mmio_base + HOST_IRQ_STAT); + + if (unlikely(!(host_irq_stat & HIRQ_GLOBAL))) + goto out; + + spin_lock(&host->lock); + + for (i = 0; i < NR_PORTS; i++) + if (host_irq_stat & (HIRQ_PORT0 << i)) { + inic_host_intr(host->ports[i]); + handled++; + } + + spin_unlock(&host->lock); + + out: + return IRQ_RETVAL(handled); +} + +static int inic_check_atapi_dma(struct ata_queued_cmd *qc) +{ + /* For some reason ATAPI_PROT_DMA doesn't work for some + * commands including writes and other misc ops. Use PIO + * protocol instead, which BTW is driven by the DMA engine + * anyway, so it shouldn't make much difference for native + * SATA devices. + */ + if (atapi_cmd_type(qc->cdb[0]) == READ) + return 0; + return 1; +} + +static void inic_fill_sg(struct inic_prd *prd, struct ata_queued_cmd *qc) +{ + struct scatterlist *sg; + unsigned int si; + u8 flags = 0; + + if (qc->tf.flags & ATA_TFLAG_WRITE) + flags |= PRD_WRITE; + + if (ata_is_dma(qc->tf.protocol)) + flags |= PRD_DMA; + + for_each_sg(qc->sg, sg, qc->n_elem, si) { + prd->mad = cpu_to_le32(sg_dma_address(sg)); + prd->len = cpu_to_le16(sg_dma_len(sg)); + prd->flags = flags; + prd++; + } + + WARN_ON(!si); + prd[-1].flags |= PRD_END; +} + +static void inic_qc_prep(struct ata_queued_cmd *qc) +{ + struct inic_port_priv *pp = qc->ap->private_data; + struct inic_pkt *pkt = pp->pkt; + struct inic_cpb *cpb = &pkt->cpb; + struct inic_prd *prd = pkt->prd; + bool is_atapi = ata_is_atapi(qc->tf.protocol); + bool is_data = ata_is_data(qc->tf.protocol); + unsigned int cdb_len = 0; + + VPRINTK("ENTER\n"); + + if (is_atapi) + cdb_len = qc->dev->cdb_len; + + /* prepare packet, based on initio driver */ + memset(pkt, 0, sizeof(struct inic_pkt)); + + cpb->ctl_flags = CPB_CTL_VALID | CPB_CTL_IEN; + if (is_atapi || is_data) + cpb->ctl_flags |= CPB_CTL_DATA; + + cpb->len = cpu_to_le32(qc->nbytes + cdb_len); + cpb->prd = cpu_to_le32(pp->pkt_dma + offsetof(struct inic_pkt, prd)); + + cpb->device = qc->tf.device; + cpb->feature = qc->tf.feature; + cpb->nsect = qc->tf.nsect; + cpb->lbal = qc->tf.lbal; + cpb->lbam = qc->tf.lbam; + cpb->lbah = qc->tf.lbah; + + if (qc->tf.flags & ATA_TFLAG_LBA48) { + cpb->hob_feature = qc->tf.hob_feature; + cpb->hob_nsect = qc->tf.hob_nsect; + cpb->hob_lbal = qc->tf.hob_lbal; + cpb->hob_lbam = qc->tf.hob_lbam; + cpb->hob_lbah = qc->tf.hob_lbah; + } + + cpb->command = qc->tf.command; + /* don't load ctl - dunno why. it's like that in the initio driver */ + + /* setup PRD for CDB */ + if (is_atapi) { + memcpy(pkt->cdb, qc->cdb, ATAPI_CDB_LEN); + prd->mad = cpu_to_le32(pp->pkt_dma + + offsetof(struct inic_pkt, cdb)); + prd->len = cpu_to_le16(cdb_len); + prd->flags = PRD_CDB | PRD_WRITE; + if (!is_data) + prd->flags |= PRD_END; + prd++; + } + + /* setup sg table */ + if (is_data) + inic_fill_sg(prd, qc); + + pp->cpb_tbl[0] = pp->pkt_dma; +} + +static unsigned int inic_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_base = inic_port_base(ap); + + /* fire up the ADMA engine */ + writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL); + writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL); + writeb(0, port_base + PORT_CPB_PTQFIFO); + + return 0; +} + +static void inic_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + void __iomem *port_base = inic_port_base(ap); + + tf->feature = readb(port_base + PORT_TF_FEATURE); + tf->nsect = readb(port_base + PORT_TF_NSECT); + tf->lbal = readb(port_base + PORT_TF_LBAL); + tf->lbam = readb(port_base + PORT_TF_LBAM); + tf->lbah = readb(port_base + PORT_TF_LBAH); + tf->device = readb(port_base + PORT_TF_DEVICE); + tf->command = readb(port_base + PORT_TF_COMMAND); +} + +static bool inic_qc_fill_rtf(struct ata_queued_cmd *qc) +{ + struct ata_taskfile *rtf = &qc->result_tf; + struct ata_taskfile tf; + + /* FIXME: Except for status and error, result TF access + * doesn't work. I tried reading from BAR0/2, CPB and BAR5. + * None works regardless of which command interface is used. + * For now return true iff status indicates device error. + * This means that we're reporting bogus sector for RW + * failures. Eeekk.... + */ + inic_tf_read(qc->ap, &tf); + + if (!(tf.command & ATA_ERR)) + return false; + + rtf->command = tf.command; + rtf->feature = tf.feature; + return true; +} + +static void inic_freeze(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + + writeb(PIRQ_MASK_FREEZE, port_base + PORT_IRQ_MASK); + writeb(0xff, port_base + PORT_IRQ_STAT); +} + +static void inic_thaw(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + + writeb(0xff, port_base + PORT_IRQ_STAT); + writeb(PIRQ_MASK_DEFAULT, port_base + PORT_IRQ_MASK); +} + +static int inic_check_ready(struct ata_link *link) +{ + void __iomem *port_base = inic_port_base(link->ap); + + return ata_check_ready(readb(port_base + PORT_TF_COMMAND)); +} + +/* + * SRST and SControl hardreset don't give valid signature on this + * controller. Only controller specific hardreset mechanism works. + */ +static int inic_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + void __iomem *port_base = inic_port_base(ap); + void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + int rc; + + /* hammer it into sane state */ + inic_reset_port(port_base); + + writew(IDMA_CTL_RST_ATA, idma_ctl); + readw(idma_ctl); /* flush */ + ata_msleep(ap, 1); + writew(0, idma_ctl); + + rc = sata_link_resume(link, timing, deadline); + if (rc) { + ata_link_warn(link, + "failed to resume link after reset (errno=%d)\n", + rc); + return rc; + } + + *class = ATA_DEV_NONE; + if (ata_link_online(link)) { + struct ata_taskfile tf; + + /* wait for link to become ready */ + rc = ata_wait_after_reset(link, deadline, inic_check_ready); + /* link occupied, -ENODEV too is an error */ + if (rc) { + ata_link_warn(link, + "device not ready after hardreset (errno=%d)\n", + rc); + return rc; + } + + inic_tf_read(ap, &tf); + *class = ata_dev_classify(&tf); + } + + return 0; +} + +static void inic_error_handler(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + + inic_reset_port(port_base); + ata_std_error_handler(ap); +} + +static void inic_post_internal_cmd(struct ata_queued_cmd *qc) +{ + /* make DMA engine forget about the failed command */ + if (qc->flags & ATA_QCFLAG_FAILED) + inic_reset_port(inic_port_base(qc->ap)); +} + +static void init_port(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + struct inic_port_priv *pp = ap->private_data; + + /* clear packet and CPB table */ + memset(pp->pkt, 0, sizeof(struct inic_pkt)); + memset(pp->cpb_tbl, 0, IDMA_CPB_TBL_SIZE); + + /* setup CPB lookup table addresses */ + writel(pp->cpb_tbl_dma, port_base + PORT_CPB_CPBLAR); +} + +static int inic_port_resume(struct ata_port *ap) +{ + init_port(ap); + return 0; +} + +static int inic_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct inic_port_priv *pp; + + /* alloc and initialize private data */ + pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + ap->private_data = pp; + + /* Alloc resources */ + pp->pkt = dmam_alloc_coherent(dev, sizeof(struct inic_pkt), + &pp->pkt_dma, GFP_KERNEL); + if (!pp->pkt) + return -ENOMEM; + + pp->cpb_tbl = dmam_alloc_coherent(dev, IDMA_CPB_TBL_SIZE, + &pp->cpb_tbl_dma, GFP_KERNEL); + if (!pp->cpb_tbl) + return -ENOMEM; + + init_port(ap); + + return 0; +} + +static struct ata_port_operations inic_port_ops = { + .inherits = &sata_port_ops, + + .check_atapi_dma = inic_check_atapi_dma, + .qc_prep = inic_qc_prep, + .qc_issue = inic_qc_issue, + .qc_fill_rtf = inic_qc_fill_rtf, + + .freeze = inic_freeze, + .thaw = inic_thaw, + .hardreset = inic_hardreset, + .error_handler = inic_error_handler, + .post_internal_cmd = inic_post_internal_cmd, + + .scr_read = inic_scr_read, + .scr_write = inic_scr_write, + + .port_resume = inic_port_resume, + .port_start = inic_port_start, +}; + +static struct ata_port_info inic_port_info = { + .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &inic_port_ops +}; + +static int init_controller(void __iomem *mmio_base, u16 hctl) +{ + int i; + u16 val; + + hctl &= ~HCTL_KNOWN_BITS; + + /* Soft reset whole controller. Spec says reset duration is 3 + * PCI clocks, be generous and give it 10ms. + */ + writew(hctl | HCTL_SOFTRST, mmio_base + HOST_CTL); + readw(mmio_base + HOST_CTL); /* flush */ + + for (i = 0; i < 10; i++) { + msleep(1); + val = readw(mmio_base + HOST_CTL); + if (!(val & HCTL_SOFTRST)) + break; + } + + if (val & HCTL_SOFTRST) + return -EIO; + + /* mask all interrupts and reset ports */ + for (i = 0; i < NR_PORTS; i++) { + void __iomem *port_base = mmio_base + i * PORT_SIZE; + + writeb(0xff, port_base + PORT_IRQ_MASK); + inic_reset_port(port_base); + } + + /* port IRQ is masked now, unmask global IRQ */ + writew(hctl & ~HCTL_IRQOFF, mmio_base + HOST_CTL); + val = readw(mmio_base + HOST_IRQ_MASK); + val &= ~(HIRQ_PORT0 | HIRQ_PORT1); + writew(val, mmio_base + HOST_IRQ_MASK); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int inic_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + struct inic_host_priv *hpriv = host->private_data; + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { + rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl); + if (rc) + return rc; + } + + ata_host_resume(host); + + return 0; +} +#endif + +static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + const struct ata_port_info *ppi[] = { &inic_port_info, NULL }; + struct ata_host *host; + struct inic_host_priv *hpriv; + void __iomem * const *iomap; + int mmio_bar; + int i, rc; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + dev_alert(&pdev->dev, "inic162x support is broken with common data corruption issues and will be disabled by default, contact linux-ide@vger.kernel.org if in production use\n"); + + /* alloc host */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS); + hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); + if (!host || !hpriv) + return -ENOMEM; + + host->private_data = hpriv; + + /* Acquire resources and fill host. Note that PCI and cardbus + * use different BARs. + */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + if (pci_resource_flags(pdev, MMIO_BAR_PCI) & IORESOURCE_MEM) + mmio_bar = MMIO_BAR_PCI; + else + mmio_bar = MMIO_BAR_CARDBUS; + + rc = pcim_iomap_regions(pdev, 1 << mmio_bar, DRV_NAME); + if (rc) + return rc; + host->iomap = iomap = pcim_iomap_table(pdev); + hpriv->mmio_base = iomap[mmio_bar]; + hpriv->cached_hctl = readw(hpriv->mmio_base + HOST_CTL); + + for (i = 0; i < NR_PORTS; i++) { + struct ata_port *ap = host->ports[i]; + + ata_port_pbar_desc(ap, mmio_bar, -1, "mmio"); + ata_port_pbar_desc(ap, mmio_bar, i * PORT_SIZE, "port"); + } + + /* Set dma_mask. This devices doesn't support 64bit addressing. */ + rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, "32-bit DMA enable failed\n"); + return rc; + } + + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n"); + return rc; + } + + /* + * This controller is braindamaged. dma_boundary is 0xffff + * like others but it will lock up the whole machine HARD if + * 65536 byte PRD entry is fed. Reduce maximum segment size. + */ + rc = pci_set_dma_max_seg_size(pdev, 65536 - 512); + if (rc) { + dev_err(&pdev->dev, "failed to set the maximum segment size\n"); + return rc; + } + + rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl); + if (rc) { + dev_err(&pdev->dev, "failed to initialize controller\n"); + return rc; + } + + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, inic_interrupt, IRQF_SHARED, + &inic_sht); +} + +static const struct pci_device_id inic_pci_tbl[] = { + { PCI_VDEVICE(INIT, 0x1622), }, + { }, +}; + +static struct pci_driver inic_pci_driver = { + .name = DRV_NAME, + .id_table = inic_pci_tbl, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = inic_pci_device_resume, +#endif + .probe = inic_init_one, + .remove = ata_pci_remove_one, +}; + +module_pci_driver(inic_pci_driver); + +MODULE_AUTHOR("Tejun Heo"); +MODULE_DESCRIPTION("low-level driver for Initio 162x SATA"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(pci, inic_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c new file mode 100644 index 000000000..bd74ee555 --- /dev/null +++ b/drivers/ata/sata_mv.c @@ -0,0 +1,4524 @@ +/* + * sata_mv.c - Marvell SATA support + * + * Copyright 2008-2009: Marvell Corporation, all rights reserved. + * Copyright 2005: EMC Corporation, all rights reserved. + * Copyright 2005 Red Hat, Inc. All rights reserved. + * + * Originally written by Brett Russ. + * Extensive overhaul and enhancement by Mark Lord . + * + * Please ALWAYS copy linux-ide@vger.kernel.org on emails. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +/* + * sata_mv TODO list: + * + * --> Develop a low-power-consumption strategy, and implement it. + * + * --> Add sysfs attributes for per-chip / per-HC IRQ coalescing thresholds. + * + * --> [Experiment, Marvell value added] Is it possible to use target + * mode to cross-connect two Linux boxes with Marvell cards? If so, + * creating LibATA target mode support would be very interesting. + * + * Target mode, for those without docs, is the ability to directly + * connect two SATA ports. + */ + +/* + * 80x1-B2 errata PCI#11: + * + * Users of the 6041/6081 Rev.B2 chips (current is C0) + * should be careful to insert those cards only onto PCI-X bus #0, + * and only in device slots 0..7, not higher. The chips may not + * work correctly otherwise (note: this is a pretty rare condition). + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_mv" +#define DRV_VERSION "1.28" + +/* + * module options + */ + +#ifdef CONFIG_PCI +static int msi; +module_param(msi, int, S_IRUGO); +MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); +#endif + +static int irq_coalescing_io_count; +module_param(irq_coalescing_io_count, int, S_IRUGO); +MODULE_PARM_DESC(irq_coalescing_io_count, + "IRQ coalescing I/O count threshold (0..255)"); + +static int irq_coalescing_usecs; +module_param(irq_coalescing_usecs, int, S_IRUGO); +MODULE_PARM_DESC(irq_coalescing_usecs, + "IRQ coalescing time threshold in usecs"); + +enum { + /* BAR's are enumerated in terms of pci_resource_start() terms */ + MV_PRIMARY_BAR = 0, /* offset 0x10: memory space */ + MV_IO_BAR = 2, /* offset 0x18: IO space */ + MV_MISC_BAR = 3, /* offset 0x1c: FLASH, NVRAM, SRAM */ + + MV_MAJOR_REG_AREA_SZ = 0x10000, /* 64KB */ + MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */ + + /* For use with both IRQ coalescing methods ("all ports" or "per-HC" */ + COAL_CLOCKS_PER_USEC = 150, /* for calculating COAL_TIMEs */ + MAX_COAL_TIME_THRESHOLD = ((1 << 24) - 1), /* internal clocks count */ + MAX_COAL_IO_COUNT = 255, /* completed I/O count */ + + MV_PCI_REG_BASE = 0, + + /* + * Per-chip ("all ports") interrupt coalescing feature. + * This is only for GEN_II / GEN_IIE hardware. + * + * Coalescing defers the interrupt until either the IO_THRESHOLD + * (count of completed I/Os) is met, or the TIME_THRESHOLD is met. + */ + COAL_REG_BASE = 0x18000, + IRQ_COAL_CAUSE = (COAL_REG_BASE + 0x08), + ALL_PORTS_COAL_IRQ = (1 << 4), /* all ports irq event */ + + IRQ_COAL_IO_THRESHOLD = (COAL_REG_BASE + 0xcc), + IRQ_COAL_TIME_THRESHOLD = (COAL_REG_BASE + 0xd0), + + /* + * Registers for the (unused here) transaction coalescing feature: + */ + TRAN_COAL_CAUSE_LO = (COAL_REG_BASE + 0x88), + TRAN_COAL_CAUSE_HI = (COAL_REG_BASE + 0x8c), + + SATAHC0_REG_BASE = 0x20000, + FLASH_CTL = 0x1046c, + GPIO_PORT_CTL = 0x104f0, + RESET_CFG = 0x180d8, + + MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ, + MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ, + MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */ + MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ, + + MV_MAX_Q_DEPTH = 32, + MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1, + + /* CRQB needs alignment on a 1KB boundary. Size == 1KB + * CRPB needs alignment on a 256B boundary. Size == 256B + * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B + */ + MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH), + MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH), + MV_MAX_SG_CT = 256, + MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT), + + /* Determine hc from 0-7 port: hc = port >> MV_PORT_HC_SHIFT */ + MV_PORT_HC_SHIFT = 2, + MV_PORTS_PER_HC = (1 << MV_PORT_HC_SHIFT), /* 4 */ + /* Determine hc port from 0-7 port: hardport = port & MV_PORT_MASK */ + MV_PORT_MASK = (MV_PORTS_PER_HC - 1), /* 3 */ + + /* Host Flags */ + MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ + + MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_PIO_POLLING, + + MV_GEN_I_FLAGS = MV_COMMON_FLAGS | ATA_FLAG_NO_ATAPI, + + MV_GEN_II_FLAGS = MV_COMMON_FLAGS | ATA_FLAG_NCQ | + ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA, + + MV_GEN_IIE_FLAGS = MV_GEN_II_FLAGS | ATA_FLAG_AN, + + CRQB_FLAG_READ = (1 << 0), + CRQB_TAG_SHIFT = 1, + CRQB_IOID_SHIFT = 6, /* CRQB Gen-II/IIE IO Id shift */ + CRQB_PMP_SHIFT = 12, /* CRQB Gen-II/IIE PMP shift */ + CRQB_HOSTQ_SHIFT = 17, /* CRQB Gen-II/IIE HostQueTag shift */ + CRQB_CMD_ADDR_SHIFT = 8, + CRQB_CMD_CS = (0x2 << 11), + CRQB_CMD_LAST = (1 << 15), + + CRPB_FLAG_STATUS_SHIFT = 8, + CRPB_IOID_SHIFT_6 = 5, /* CRPB Gen-II IO Id shift */ + CRPB_IOID_SHIFT_7 = 7, /* CRPB Gen-IIE IO Id shift */ + + EPRD_FLAG_END_OF_TBL = (1 << 31), + + /* PCI interface registers */ + + MV_PCI_COMMAND = 0xc00, + MV_PCI_COMMAND_MWRCOM = (1 << 4), /* PCI Master Write Combining */ + MV_PCI_COMMAND_MRDTRIG = (1 << 7), /* PCI Master Read Trigger */ + + PCI_MAIN_CMD_STS = 0xd30, + STOP_PCI_MASTER = (1 << 2), + PCI_MASTER_EMPTY = (1 << 3), + GLOB_SFT_RST = (1 << 4), + + MV_PCI_MODE = 0xd00, + MV_PCI_MODE_MASK = 0x30, + + MV_PCI_EXP_ROM_BAR_CTL = 0xd2c, + MV_PCI_DISC_TIMER = 0xd04, + MV_PCI_MSI_TRIGGER = 0xc38, + MV_PCI_SERR_MASK = 0xc28, + MV_PCI_XBAR_TMOUT = 0x1d04, + MV_PCI_ERR_LOW_ADDRESS = 0x1d40, + MV_PCI_ERR_HIGH_ADDRESS = 0x1d44, + MV_PCI_ERR_ATTRIBUTE = 0x1d48, + MV_PCI_ERR_COMMAND = 0x1d50, + + PCI_IRQ_CAUSE = 0x1d58, + PCI_IRQ_MASK = 0x1d5c, + PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */ + + PCIE_IRQ_CAUSE = 0x1900, + PCIE_IRQ_MASK = 0x1910, + PCIE_UNMASK_ALL_IRQS = 0x40a, /* assorted bits */ + + /* Host Controller Main Interrupt Cause/Mask registers (1 per-chip) */ + PCI_HC_MAIN_IRQ_CAUSE = 0x1d60, + PCI_HC_MAIN_IRQ_MASK = 0x1d64, + SOC_HC_MAIN_IRQ_CAUSE = 0x20020, + SOC_HC_MAIN_IRQ_MASK = 0x20024, + ERR_IRQ = (1 << 0), /* shift by (2 * port #) */ + DONE_IRQ = (1 << 1), /* shift by (2 * port #) */ + HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */ + HC_SHIFT = 9, /* bits 9-17 = HC1's ports */ + DONE_IRQ_0_3 = 0x000000aa, /* DONE_IRQ ports 0,1,2,3 */ + DONE_IRQ_4_7 = (DONE_IRQ_0_3 << HC_SHIFT), /* 4,5,6,7 */ + PCI_ERR = (1 << 18), + TRAN_COAL_LO_DONE = (1 << 19), /* transaction coalescing */ + TRAN_COAL_HI_DONE = (1 << 20), /* transaction coalescing */ + PORTS_0_3_COAL_DONE = (1 << 8), /* HC0 IRQ coalescing */ + PORTS_4_7_COAL_DONE = (1 << 17), /* HC1 IRQ coalescing */ + ALL_PORTS_COAL_DONE = (1 << 21), /* GEN_II(E) IRQ coalescing */ + GPIO_INT = (1 << 22), + SELF_INT = (1 << 23), + TWSI_INT = (1 << 24), + HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */ + HC_MAIN_RSVD_5 = (0x1fff << 19), /* bits 31-19 */ + HC_MAIN_RSVD_SOC = (0x3fffffb << 6), /* bits 31-9, 7-6 */ + + /* SATAHC registers */ + HC_CFG = 0x00, + + HC_IRQ_CAUSE = 0x14, + DMA_IRQ = (1 << 0), /* shift by port # */ + HC_COAL_IRQ = (1 << 4), /* IRQ coalescing */ + DEV_IRQ = (1 << 8), /* shift by port # */ + + /* + * Per-HC (Host-Controller) interrupt coalescing feature. + * This is present on all chip generations. + * + * Coalescing defers the interrupt until either the IO_THRESHOLD + * (count of completed I/Os) is met, or the TIME_THRESHOLD is met. + */ + HC_IRQ_COAL_IO_THRESHOLD = 0x000c, + HC_IRQ_COAL_TIME_THRESHOLD = 0x0010, + + SOC_LED_CTRL = 0x2c, + SOC_LED_CTRL_BLINK = (1 << 0), /* Active LED blink */ + SOC_LED_CTRL_ACT_PRESENCE = (1 << 2), /* Multiplex dev presence */ + /* with dev activity LED */ + + /* Shadow block registers */ + SHD_BLK = 0x100, + SHD_CTL_AST = 0x20, /* ofs from SHD_BLK */ + + /* SATA registers */ + SATA_STATUS = 0x300, /* ctrl, err regs follow status */ + SATA_ACTIVE = 0x350, + FIS_IRQ_CAUSE = 0x364, + FIS_IRQ_CAUSE_AN = (1 << 9), /* async notification */ + + LTMODE = 0x30c, /* requires read-after-write */ + LTMODE_BIT8 = (1 << 8), /* unknown, but necessary */ + + PHY_MODE2 = 0x330, + PHY_MODE3 = 0x310, + + PHY_MODE4 = 0x314, /* requires read-after-write */ + PHY_MODE4_CFG_MASK = 0x00000003, /* phy internal config field */ + PHY_MODE4_CFG_VALUE = 0x00000001, /* phy internal config field */ + PHY_MODE4_RSVD_ZEROS = 0x5de3fffa, /* Gen2e always write zeros */ + PHY_MODE4_RSVD_ONES = 0x00000005, /* Gen2e always write ones */ + + SATA_IFCTL = 0x344, + SATA_TESTCTL = 0x348, + SATA_IFSTAT = 0x34c, + VENDOR_UNIQUE_FIS = 0x35c, + + FISCFG = 0x360, + FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */ + FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */ + + PHY_MODE9_GEN2 = 0x398, + PHY_MODE9_GEN1 = 0x39c, + PHYCFG_OFS = 0x3a0, /* only in 65n devices */ + + MV5_PHY_MODE = 0x74, + MV5_LTMODE = 0x30, + MV5_PHY_CTL = 0x0C, + SATA_IFCFG = 0x050, + LP_PHY_CTL = 0x058, + LP_PHY_CTL_PIN_PU_PLL = (1 << 0), + LP_PHY_CTL_PIN_PU_RX = (1 << 1), + LP_PHY_CTL_PIN_PU_TX = (1 << 2), + LP_PHY_CTL_GEN_TX_3G = (1 << 5), + LP_PHY_CTL_GEN_RX_3G = (1 << 9), + + MV_M2_PREAMP_MASK = 0x7e0, + + /* Port registers */ + EDMA_CFG = 0, + EDMA_CFG_Q_DEPTH = 0x1f, /* max device queue depth */ + EDMA_CFG_NCQ = (1 << 5), /* for R/W FPDMA queued */ + EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */ + EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */ + EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */ + EDMA_CFG_EDMA_FBS = (1 << 16), /* EDMA FIS-Based Switching */ + EDMA_CFG_FBS = (1 << 26), /* FIS-Based Switching */ + + EDMA_ERR_IRQ_CAUSE = 0x8, + EDMA_ERR_IRQ_MASK = 0xc, + EDMA_ERR_D_PAR = (1 << 0), /* UDMA data parity err */ + EDMA_ERR_PRD_PAR = (1 << 1), /* UDMA PRD parity err */ + EDMA_ERR_DEV = (1 << 2), /* device error */ + EDMA_ERR_DEV_DCON = (1 << 3), /* device disconnect */ + EDMA_ERR_DEV_CON = (1 << 4), /* device connected */ + EDMA_ERR_SERR = (1 << 5), /* SError bits [WBDST] raised */ + EDMA_ERR_SELF_DIS = (1 << 7), /* Gen II/IIE self-disable */ + EDMA_ERR_SELF_DIS_5 = (1 << 8), /* Gen I self-disable */ + EDMA_ERR_BIST_ASYNC = (1 << 8), /* BIST FIS or Async Notify */ + EDMA_ERR_TRANS_IRQ_7 = (1 << 8), /* Gen IIE transprt layer irq */ + EDMA_ERR_CRQB_PAR = (1 << 9), /* CRQB parity error */ + EDMA_ERR_CRPB_PAR = (1 << 10), /* CRPB parity error */ + EDMA_ERR_INTRL_PAR = (1 << 11), /* internal parity error */ + EDMA_ERR_IORDY = (1 << 12), /* IORdy timeout */ + + EDMA_ERR_LNK_CTRL_RX = (0xf << 13), /* link ctrl rx error */ + EDMA_ERR_LNK_CTRL_RX_0 = (1 << 13), /* transient: CRC err */ + EDMA_ERR_LNK_CTRL_RX_1 = (1 << 14), /* transient: FIFO err */ + EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15), /* fatal: caught SYNC */ + EDMA_ERR_LNK_CTRL_RX_3 = (1 << 16), /* transient: FIS rx err */ + + EDMA_ERR_LNK_DATA_RX = (0xf << 17), /* link data rx error */ + + EDMA_ERR_LNK_CTRL_TX = (0x1f << 21), /* link ctrl tx error */ + EDMA_ERR_LNK_CTRL_TX_0 = (1 << 21), /* transient: CRC err */ + EDMA_ERR_LNK_CTRL_TX_1 = (1 << 22), /* transient: FIFO err */ + EDMA_ERR_LNK_CTRL_TX_2 = (1 << 23), /* transient: caught SYNC */ + EDMA_ERR_LNK_CTRL_TX_3 = (1 << 24), /* transient: caught DMAT */ + EDMA_ERR_LNK_CTRL_TX_4 = (1 << 25), /* transient: FIS collision */ + + EDMA_ERR_LNK_DATA_TX = (0x1f << 26), /* link data tx error */ + + EDMA_ERR_TRANS_PROTO = (1 << 31), /* transport protocol error */ + EDMA_ERR_OVERRUN_5 = (1 << 5), + EDMA_ERR_UNDERRUN_5 = (1 << 6), + + EDMA_ERR_IRQ_TRANSIENT = EDMA_ERR_LNK_CTRL_RX_0 | + EDMA_ERR_LNK_CTRL_RX_1 | + EDMA_ERR_LNK_CTRL_RX_3 | + EDMA_ERR_LNK_CTRL_TX, + + EDMA_EH_FREEZE = EDMA_ERR_D_PAR | + EDMA_ERR_PRD_PAR | + EDMA_ERR_DEV_DCON | + EDMA_ERR_DEV_CON | + EDMA_ERR_SERR | + EDMA_ERR_SELF_DIS | + EDMA_ERR_CRQB_PAR | + EDMA_ERR_CRPB_PAR | + EDMA_ERR_INTRL_PAR | + EDMA_ERR_IORDY | + EDMA_ERR_LNK_CTRL_RX_2 | + EDMA_ERR_LNK_DATA_RX | + EDMA_ERR_LNK_DATA_TX | + EDMA_ERR_TRANS_PROTO, + + EDMA_EH_FREEZE_5 = EDMA_ERR_D_PAR | + EDMA_ERR_PRD_PAR | + EDMA_ERR_DEV_DCON | + EDMA_ERR_DEV_CON | + EDMA_ERR_OVERRUN_5 | + EDMA_ERR_UNDERRUN_5 | + EDMA_ERR_SELF_DIS_5 | + EDMA_ERR_CRQB_PAR | + EDMA_ERR_CRPB_PAR | + EDMA_ERR_INTRL_PAR | + EDMA_ERR_IORDY, + + EDMA_REQ_Q_BASE_HI = 0x10, + EDMA_REQ_Q_IN_PTR = 0x14, /* also contains BASE_LO */ + + EDMA_REQ_Q_OUT_PTR = 0x18, + EDMA_REQ_Q_PTR_SHIFT = 5, + + EDMA_RSP_Q_BASE_HI = 0x1c, + EDMA_RSP_Q_IN_PTR = 0x20, + EDMA_RSP_Q_OUT_PTR = 0x24, /* also contains BASE_LO */ + EDMA_RSP_Q_PTR_SHIFT = 3, + + EDMA_CMD = 0x28, /* EDMA command register */ + EDMA_EN = (1 << 0), /* enable EDMA */ + EDMA_DS = (1 << 1), /* disable EDMA; self-negated */ + EDMA_RESET = (1 << 2), /* reset eng/trans/link/phy */ + + EDMA_STATUS = 0x30, /* EDMA engine status */ + EDMA_STATUS_CACHE_EMPTY = (1 << 6), /* GenIIe command cache empty */ + EDMA_STATUS_IDLE = (1 << 7), /* GenIIe EDMA enabled/idle */ + + EDMA_IORDY_TMOUT = 0x34, + EDMA_ARB_CFG = 0x38, + + EDMA_HALTCOND = 0x60, /* GenIIe halt conditions */ + EDMA_UNKNOWN_RSVD = 0x6C, /* GenIIe unknown/reserved */ + + BMDMA_CMD = 0x224, /* bmdma command register */ + BMDMA_STATUS = 0x228, /* bmdma status register */ + BMDMA_PRD_LOW = 0x22c, /* bmdma PRD addr 31:0 */ + BMDMA_PRD_HIGH = 0x230, /* bmdma PRD addr 63:32 */ + + /* Host private flags (hp_flags) */ + MV_HP_FLAG_MSI = (1 << 0), + MV_HP_ERRATA_50XXB0 = (1 << 1), + MV_HP_ERRATA_50XXB2 = (1 << 2), + MV_HP_ERRATA_60X1B2 = (1 << 3), + MV_HP_ERRATA_60X1C0 = (1 << 4), + MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */ + MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */ + MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */ + MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */ + MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */ + MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */ + MV_HP_QUIRK_LED_BLINK_EN = (1 << 12), /* is led blinking enabled? */ + MV_HP_FIX_LP_PHY_CTL = (1 << 13), /* fix speed in LP_PHY_CTL ? */ + + /* Port private flags (pp_flags) */ + MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ + MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */ + MV_PP_FLAG_FBS_EN = (1 << 2), /* is EDMA set up for FBS? */ + MV_PP_FLAG_DELAYED_EH = (1 << 3), /* delayed dev err handling */ + MV_PP_FLAG_FAKE_ATA_BUSY = (1 << 4), /* ignore initial ATA_DRDY */ +}; + +#define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I) +#define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II) +#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE) +#define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE) +#define IS_SOC(hpriv) ((hpriv)->hp_flags & MV_HP_FLAG_SOC) + +#define WINDOW_CTRL(i) (0x20030 + ((i) << 4)) +#define WINDOW_BASE(i) (0x20034 + ((i) << 4)) + +enum { + /* DMA boundary 0xffff is required by the s/g splitting + * we need on /length/ in mv_fill-sg(). + */ + MV_DMA_BOUNDARY = 0xffffU, + + /* mask of register bits containing lower 32 bits + * of EDMA request queue DMA address + */ + EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, + + /* ditto, for response queue */ + EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, +}; + +enum chip_type { + chip_504x, + chip_508x, + chip_5080, + chip_604x, + chip_608x, + chip_6042, + chip_7042, + chip_soc, +}; + +/* Command ReQuest Block: 32B */ +struct mv_crqb { + __le32 sg_addr; + __le32 sg_addr_hi; + __le16 ctrl_flags; + __le16 ata_cmd[11]; +}; + +struct mv_crqb_iie { + __le32 addr; + __le32 addr_hi; + __le32 flags; + __le32 len; + __le32 ata_cmd[4]; +}; + +/* Command ResPonse Block: 8B */ +struct mv_crpb { + __le16 id; + __le16 flags; + __le32 tmstmp; +}; + +/* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */ +struct mv_sg { + __le32 addr; + __le32 flags_size; + __le32 addr_hi; + __le32 reserved; +}; + +/* + * We keep a local cache of a few frequently accessed port + * registers here, to avoid having to read them (very slow) + * when switching between EDMA and non-EDMA modes. + */ +struct mv_cached_regs { + u32 fiscfg; + u32 ltmode; + u32 haltcond; + u32 unknown_rsvd; +}; + +struct mv_port_priv { + struct mv_crqb *crqb; + dma_addr_t crqb_dma; + struct mv_crpb *crpb; + dma_addr_t crpb_dma; + struct mv_sg *sg_tbl[MV_MAX_Q_DEPTH]; + dma_addr_t sg_tbl_dma[MV_MAX_Q_DEPTH]; + + unsigned int req_idx; + unsigned int resp_idx; + + u32 pp_flags; + struct mv_cached_regs cached; + unsigned int delayed_eh_pmp_map; +}; + +struct mv_port_signal { + u32 amps; + u32 pre; +}; + +struct mv_host_priv { + u32 hp_flags; + unsigned int board_idx; + u32 main_irq_mask; + struct mv_port_signal signal[8]; + const struct mv_hw_ops *ops; + int n_ports; + void __iomem *base; + void __iomem *main_irq_cause_addr; + void __iomem *main_irq_mask_addr; + u32 irq_cause_offset; + u32 irq_mask_offset; + u32 unmask_all_irqs; + + /* + * Needed on some devices that require their clocks to be enabled. + * These are optional: if the platform device does not have any + * clocks, they won't be used. Also, if the underlying hardware + * does not support the common clock framework (CONFIG_HAVE_CLK=n), + * all the clock operations become no-ops (see clk.h). + */ + struct clk *clk; + struct clk **port_clks; + /* + * Some devices have a SATA PHY which can be enabled/disabled + * in order to save power. These are optional: if the platform + * devices does not have any phy, they won't be used. + */ + struct phy **port_phys; + /* + * These consistent DMA memory pools give us guaranteed + * alignment for hardware-accessed data structures, + * and less memory waste in accomplishing the alignment. + */ + struct dma_pool *crqb_pool; + struct dma_pool *crpb_pool; + struct dma_pool *sg_tbl_pool; +}; + +struct mv_hw_ops { + void (*phy_errata)(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port); + void (*enable_leds)(struct mv_host_priv *hpriv, void __iomem *mmio); + void (*read_preamp)(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio); + int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc); + void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio); + void (*reset_bus)(struct ata_host *host, void __iomem *mmio); +}; + +static int mv_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val); +static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val); +static int mv5_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val); +static int mv5_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val); +static int mv_port_start(struct ata_port *ap); +static void mv_port_stop(struct ata_port *ap); +static int mv_qc_defer(struct ata_queued_cmd *qc); +static void mv_qc_prep(struct ata_queued_cmd *qc); +static void mv_qc_prep_iie(struct ata_queued_cmd *qc); +static unsigned int mv_qc_issue(struct ata_queued_cmd *qc); +static int mv_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static void mv_eh_freeze(struct ata_port *ap); +static void mv_eh_thaw(struct ata_port *ap); +static void mv6_dev_config(struct ata_device *dev); + +static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port); +static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio); +static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc); +static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio); + +static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port); +static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio); +static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc); +static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv_soc_enable_leds(struct mv_host_priv *hpriv, + void __iomem *mmio); +static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio); +static int mv_soc_reset_hc(struct mv_host_priv *hpriv, + void __iomem *mmio, unsigned int n_hc); +static void mv_soc_reset_flash(struct mv_host_priv *hpriv, + void __iomem *mmio); +static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio); +static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv, + void __iomem *mmio, unsigned int port); +static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio); +static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port_no); +static int mv_stop_edma(struct ata_port *ap); +static int mv_stop_edma_engine(void __iomem *port_mmio); +static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma); + +static void mv_pmp_select(struct ata_port *ap, int pmp); +static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static int mv_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static void mv_pmp_error_handler(struct ata_port *ap); +static void mv_process_crpb_entries(struct ata_port *ap, + struct mv_port_priv *pp); + +static void mv_sff_irq_clear(struct ata_port *ap); +static int mv_check_atapi_dma(struct ata_queued_cmd *qc); +static void mv_bmdma_setup(struct ata_queued_cmd *qc); +static void mv_bmdma_start(struct ata_queued_cmd *qc); +static void mv_bmdma_stop(struct ata_queued_cmd *qc); +static u8 mv_bmdma_status(struct ata_port *ap); +static u8 mv_sff_check_status(struct ata_port *ap); + +/* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below + * because we have to allow room for worst case splitting of + * PRDs for 64K boundaries in mv_fill_sg(). + */ +#ifdef CONFIG_PCI +static struct scsi_host_template mv5_sht = { + ATA_BASE_SHT(DRV_NAME), + .sg_tablesize = MV_MAX_SG_CT / 2, + .dma_boundary = MV_DMA_BOUNDARY, +}; +#endif +static struct scsi_host_template mv6_sht = { + ATA_NCQ_SHT(DRV_NAME), + .can_queue = MV_MAX_Q_DEPTH - 1, + .sg_tablesize = MV_MAX_SG_CT / 2, + .dma_boundary = MV_DMA_BOUNDARY, +}; + +static struct ata_port_operations mv5_ops = { + .inherits = &ata_sff_port_ops, + + .lost_interrupt = ATA_OP_NULL, + + .qc_defer = mv_qc_defer, + .qc_prep = mv_qc_prep, + .qc_issue = mv_qc_issue, + + .freeze = mv_eh_freeze, + .thaw = mv_eh_thaw, + .hardreset = mv_hardreset, + + .scr_read = mv5_scr_read, + .scr_write = mv5_scr_write, + + .port_start = mv_port_start, + .port_stop = mv_port_stop, +}; + +static struct ata_port_operations mv6_ops = { + .inherits = &ata_bmdma_port_ops, + + .lost_interrupt = ATA_OP_NULL, + + .qc_defer = mv_qc_defer, + .qc_prep = mv_qc_prep, + .qc_issue = mv_qc_issue, + + .dev_config = mv6_dev_config, + + .freeze = mv_eh_freeze, + .thaw = mv_eh_thaw, + .hardreset = mv_hardreset, + .softreset = mv_softreset, + .pmp_hardreset = mv_pmp_hardreset, + .pmp_softreset = mv_softreset, + .error_handler = mv_pmp_error_handler, + + .scr_read = mv_scr_read, + .scr_write = mv_scr_write, + + .sff_check_status = mv_sff_check_status, + .sff_irq_clear = mv_sff_irq_clear, + .check_atapi_dma = mv_check_atapi_dma, + .bmdma_setup = mv_bmdma_setup, + .bmdma_start = mv_bmdma_start, + .bmdma_stop = mv_bmdma_stop, + .bmdma_status = mv_bmdma_status, + + .port_start = mv_port_start, + .port_stop = mv_port_stop, +}; + +static struct ata_port_operations mv_iie_ops = { + .inherits = &mv6_ops, + .dev_config = ATA_OP_NULL, + .qc_prep = mv_qc_prep_iie, +}; + +static const struct ata_port_info mv_port_info[] = { + { /* chip_504x */ + .flags = MV_GEN_I_FLAGS, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &mv5_ops, + }, + { /* chip_508x */ + .flags = MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &mv5_ops, + }, + { /* chip_5080 */ + .flags = MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &mv5_ops, + }, + { /* chip_604x */ + .flags = MV_GEN_II_FLAGS, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &mv6_ops, + }, + { /* chip_608x */ + .flags = MV_GEN_II_FLAGS | MV_FLAG_DUAL_HC, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &mv6_ops, + }, + { /* chip_6042 */ + .flags = MV_GEN_IIE_FLAGS, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &mv_iie_ops, + }, + { /* chip_7042 */ + .flags = MV_GEN_IIE_FLAGS, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &mv_iie_ops, + }, + { /* chip_soc */ + .flags = MV_GEN_IIE_FLAGS, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &mv_iie_ops, + }, +}; + +static const struct pci_device_id mv_pci_tbl[] = { + { PCI_VDEVICE(MARVELL, 0x5040), chip_504x }, + { PCI_VDEVICE(MARVELL, 0x5041), chip_504x }, + { PCI_VDEVICE(MARVELL, 0x5080), chip_5080 }, + { PCI_VDEVICE(MARVELL, 0x5081), chip_508x }, + /* RocketRAID 1720/174x have different identifiers */ + { PCI_VDEVICE(TTI, 0x1720), chip_6042 }, + { PCI_VDEVICE(TTI, 0x1740), chip_6042 }, + { PCI_VDEVICE(TTI, 0x1742), chip_6042 }, + + { PCI_VDEVICE(MARVELL, 0x6040), chip_604x }, + { PCI_VDEVICE(MARVELL, 0x6041), chip_604x }, + { PCI_VDEVICE(MARVELL, 0x6042), chip_6042 }, + { PCI_VDEVICE(MARVELL, 0x6080), chip_608x }, + { PCI_VDEVICE(MARVELL, 0x6081), chip_608x }, + + { PCI_VDEVICE(ADAPTEC2, 0x0241), chip_604x }, + + /* Adaptec 1430SA */ + { PCI_VDEVICE(ADAPTEC2, 0x0243), chip_7042 }, + + /* Marvell 7042 support */ + { PCI_VDEVICE(MARVELL, 0x7042), chip_7042 }, + + /* Highpoint RocketRAID PCIe series */ + { PCI_VDEVICE(TTI, 0x2300), chip_7042 }, + { PCI_VDEVICE(TTI, 0x2310), chip_7042 }, + + { } /* terminate list */ +}; + +static const struct mv_hw_ops mv5xxx_ops = { + .phy_errata = mv5_phy_errata, + .enable_leds = mv5_enable_leds, + .read_preamp = mv5_read_preamp, + .reset_hc = mv5_reset_hc, + .reset_flash = mv5_reset_flash, + .reset_bus = mv5_reset_bus, +}; + +static const struct mv_hw_ops mv6xxx_ops = { + .phy_errata = mv6_phy_errata, + .enable_leds = mv6_enable_leds, + .read_preamp = mv6_read_preamp, + .reset_hc = mv6_reset_hc, + .reset_flash = mv6_reset_flash, + .reset_bus = mv_reset_pci_bus, +}; + +static const struct mv_hw_ops mv_soc_ops = { + .phy_errata = mv6_phy_errata, + .enable_leds = mv_soc_enable_leds, + .read_preamp = mv_soc_read_preamp, + .reset_hc = mv_soc_reset_hc, + .reset_flash = mv_soc_reset_flash, + .reset_bus = mv_soc_reset_bus, +}; + +static const struct mv_hw_ops mv_soc_65n_ops = { + .phy_errata = mv_soc_65n_phy_errata, + .enable_leds = mv_soc_enable_leds, + .reset_hc = mv_soc_reset_hc, + .reset_flash = mv_soc_reset_flash, + .reset_bus = mv_soc_reset_bus, +}; + +/* + * Functions + */ + +static inline void writelfl(unsigned long data, void __iomem *addr) +{ + writel(data, addr); + (void) readl(addr); /* flush to avoid PCI posted write */ +} + +static inline unsigned int mv_hc_from_port(unsigned int port) +{ + return port >> MV_PORT_HC_SHIFT; +} + +static inline unsigned int mv_hardport_from_port(unsigned int port) +{ + return port & MV_PORT_MASK; +} + +/* + * Consolidate some rather tricky bit shift calculations. + * This is hot-path stuff, so not a function. + * Simple code, with two return values, so macro rather than inline. + * + * port is the sole input, in range 0..7. + * shift is one output, for use with main_irq_cause / main_irq_mask registers. + * hardport is the other output, in range 0..3. + * + * Note that port and hardport may be the same variable in some cases. + */ +#define MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport) \ +{ \ + shift = mv_hc_from_port(port) * HC_SHIFT; \ + hardport = mv_hardport_from_port(port); \ + shift += hardport * 2; \ +} + +static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc) +{ + return (base + SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ)); +} + +static inline void __iomem *mv_hc_base_from_port(void __iomem *base, + unsigned int port) +{ + return mv_hc_base(base, mv_hc_from_port(port)); +} + +static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port) +{ + return mv_hc_base_from_port(base, port) + + MV_SATAHC_ARBTR_REG_SZ + + (mv_hardport_from_port(port) * MV_PORT_REG_SZ); +} + +static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port) +{ + void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port); + unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL; + + return hc_mmio + ofs; +} + +static inline void __iomem *mv_host_base(struct ata_host *host) +{ + struct mv_host_priv *hpriv = host->private_data; + return hpriv->base; +} + +static inline void __iomem *mv_ap_base(struct ata_port *ap) +{ + return mv_port_base(mv_host_base(ap->host), ap->port_no); +} + +static inline int mv_get_hc_count(unsigned long port_flags) +{ + return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1); +} + +/** + * mv_save_cached_regs - (re-)initialize cached port registers + * @ap: the port whose registers we are caching + * + * Initialize the local cache of port registers, + * so that reading them over and over again can + * be avoided on the hotter paths of this driver. + * This saves a few microseconds each time we switch + * to/from EDMA mode to perform (eg.) a drive cache flush. + */ +static void mv_save_cached_regs(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + + pp->cached.fiscfg = readl(port_mmio + FISCFG); + pp->cached.ltmode = readl(port_mmio + LTMODE); + pp->cached.haltcond = readl(port_mmio + EDMA_HALTCOND); + pp->cached.unknown_rsvd = readl(port_mmio + EDMA_UNKNOWN_RSVD); +} + +/** + * mv_write_cached_reg - write to a cached port register + * @addr: hardware address of the register + * @old: pointer to cached value of the register + * @new: new value for the register + * + * Write a new value to a cached register, + * but only if the value is different from before. + */ +static inline void mv_write_cached_reg(void __iomem *addr, u32 *old, u32 new) +{ + if (new != *old) { + unsigned long laddr; + *old = new; + /* + * Workaround for 88SX60x1-B2 FEr SATA#13: + * Read-after-write is needed to prevent generating 64-bit + * write cycles on the PCI bus for SATA interface registers + * at offsets ending in 0x4 or 0xc. + * + * Looks like a lot of fuss, but it avoids an unnecessary + * +1 usec read-after-write delay for unaffected registers. + */ + laddr = (long)addr & 0xffff; + if (laddr >= 0x300 && laddr <= 0x33c) { + laddr &= 0x000f; + if (laddr == 0x4 || laddr == 0xc) { + writelfl(new, addr); /* read after write */ + return; + } + } + writel(new, addr); /* unaffected by the errata */ + } +} + +static void mv_set_edma_ptrs(void __iomem *port_mmio, + struct mv_host_priv *hpriv, + struct mv_port_priv *pp) +{ + u32 index; + + /* + * initialize request queue + */ + pp->req_idx &= MV_MAX_Q_DEPTH_MASK; /* paranoia */ + index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT; + + WARN_ON(pp->crqb_dma & 0x3ff); + writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI); + writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index, + port_mmio + EDMA_REQ_Q_IN_PTR); + writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR); + + /* + * initialize response queue + */ + pp->resp_idx &= MV_MAX_Q_DEPTH_MASK; /* paranoia */ + index = pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT; + + WARN_ON(pp->crpb_dma & 0xff); + writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI); + writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR); + writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index, + port_mmio + EDMA_RSP_Q_OUT_PTR); +} + +static void mv_write_main_irq_mask(u32 mask, struct mv_host_priv *hpriv) +{ + /* + * When writing to the main_irq_mask in hardware, + * we must ensure exclusivity between the interrupt coalescing bits + * and the corresponding individual port DONE_IRQ bits. + * + * Note that this register is really an "IRQ enable" register, + * not an "IRQ mask" register as Marvell's naming might suggest. + */ + if (mask & (ALL_PORTS_COAL_DONE | PORTS_0_3_COAL_DONE)) + mask &= ~DONE_IRQ_0_3; + if (mask & (ALL_PORTS_COAL_DONE | PORTS_4_7_COAL_DONE)) + mask &= ~DONE_IRQ_4_7; + writelfl(mask, hpriv->main_irq_mask_addr); +} + +static void mv_set_main_irq_mask(struct ata_host *host, + u32 disable_bits, u32 enable_bits) +{ + struct mv_host_priv *hpriv = host->private_data; + u32 old_mask, new_mask; + + old_mask = hpriv->main_irq_mask; + new_mask = (old_mask & ~disable_bits) | enable_bits; + if (new_mask != old_mask) { + hpriv->main_irq_mask = new_mask; + mv_write_main_irq_mask(new_mask, hpriv); + } +} + +static void mv_enable_port_irqs(struct ata_port *ap, + unsigned int port_bits) +{ + unsigned int shift, hardport, port = ap->port_no; + u32 disable_bits, enable_bits; + + MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport); + + disable_bits = (DONE_IRQ | ERR_IRQ) << shift; + enable_bits = port_bits << shift; + mv_set_main_irq_mask(ap->host, disable_bits, enable_bits); +} + +static void mv_clear_and_enable_port_irqs(struct ata_port *ap, + void __iomem *port_mmio, + unsigned int port_irqs) +{ + struct mv_host_priv *hpriv = ap->host->private_data; + int hardport = mv_hardport_from_port(ap->port_no); + void __iomem *hc_mmio = mv_hc_base_from_port( + mv_host_base(ap->host), ap->port_no); + u32 hc_irq_cause; + + /* clear EDMA event indicators, if any */ + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE); + + /* clear pending irq events */ + hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); + writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE); + + /* clear FIS IRQ Cause */ + if (IS_GEN_IIE(hpriv)) + writelfl(0, port_mmio + FIS_IRQ_CAUSE); + + mv_enable_port_irqs(ap, port_irqs); +} + +static void mv_set_irq_coalescing(struct ata_host *host, + unsigned int count, unsigned int usecs) +{ + struct mv_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->base, *hc_mmio; + u32 coal_enable = 0; + unsigned long flags; + unsigned int clks, is_dual_hc = hpriv->n_ports > MV_PORTS_PER_HC; + const u32 coal_disable = PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE | + ALL_PORTS_COAL_DONE; + + /* Disable IRQ coalescing if either threshold is zero */ + if (!usecs || !count) { + clks = count = 0; + } else { + /* Respect maximum limits of the hardware */ + clks = usecs * COAL_CLOCKS_PER_USEC; + if (clks > MAX_COAL_TIME_THRESHOLD) + clks = MAX_COAL_TIME_THRESHOLD; + if (count > MAX_COAL_IO_COUNT) + count = MAX_COAL_IO_COUNT; + } + + spin_lock_irqsave(&host->lock, flags); + mv_set_main_irq_mask(host, coal_disable, 0); + + if (is_dual_hc && !IS_GEN_I(hpriv)) { + /* + * GEN_II/GEN_IIE with dual host controllers: + * one set of global thresholds for the entire chip. + */ + writel(clks, mmio + IRQ_COAL_TIME_THRESHOLD); + writel(count, mmio + IRQ_COAL_IO_THRESHOLD); + /* clear leftover coal IRQ bit */ + writel(~ALL_PORTS_COAL_IRQ, mmio + IRQ_COAL_CAUSE); + if (count) + coal_enable = ALL_PORTS_COAL_DONE; + clks = count = 0; /* force clearing of regular regs below */ + } + + /* + * All chips: independent thresholds for each HC on the chip. + */ + hc_mmio = mv_hc_base_from_port(mmio, 0); + writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD); + writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD); + writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE); + if (count) + coal_enable |= PORTS_0_3_COAL_DONE; + if (is_dual_hc) { + hc_mmio = mv_hc_base_from_port(mmio, MV_PORTS_PER_HC); + writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD); + writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD); + writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE); + if (count) + coal_enable |= PORTS_4_7_COAL_DONE; + } + + mv_set_main_irq_mask(host, 0, coal_enable); + spin_unlock_irqrestore(&host->lock, flags); +} + +/** + * mv_start_edma - Enable eDMA engine + * @base: port base address + * @pp: port private data + * + * Verify the local cache of the eDMA state is accurate with a + * WARN_ON. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_start_edma(struct ata_port *ap, void __iomem *port_mmio, + struct mv_port_priv *pp, u8 protocol) +{ + int want_ncq = (protocol == ATA_PROT_NCQ); + + if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) { + int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0); + if (want_ncq != using_ncq) + mv_stop_edma(ap); + } + if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) { + struct mv_host_priv *hpriv = ap->host->private_data; + + mv_edma_cfg(ap, want_ncq, 1); + + mv_set_edma_ptrs(port_mmio, hpriv, pp); + mv_clear_and_enable_port_irqs(ap, port_mmio, DONE_IRQ|ERR_IRQ); + + writelfl(EDMA_EN, port_mmio + EDMA_CMD); + pp->pp_flags |= MV_PP_FLAG_EDMA_EN; + } +} + +static void mv_wait_for_edma_empty_idle(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + const u32 empty_idle = (EDMA_STATUS_CACHE_EMPTY | EDMA_STATUS_IDLE); + const int per_loop = 5, timeout = (15 * 1000 / per_loop); + int i; + + /* + * Wait for the EDMA engine to finish transactions in progress. + * No idea what a good "timeout" value might be, but measurements + * indicate that it often requires hundreds of microseconds + * with two drives in-use. So we use the 15msec value above + * as a rough guess at what even more drives might require. + */ + for (i = 0; i < timeout; ++i) { + u32 edma_stat = readl(port_mmio + EDMA_STATUS); + if ((edma_stat & empty_idle) == empty_idle) + break; + udelay(per_loop); + } + /* ata_port_info(ap, "%s: %u+ usecs\n", __func__, i); */ +} + +/** + * mv_stop_edma_engine - Disable eDMA engine + * @port_mmio: io base address + * + * LOCKING: + * Inherited from caller. + */ +static int mv_stop_edma_engine(void __iomem *port_mmio) +{ + int i; + + /* Disable eDMA. The disable bit auto clears. */ + writelfl(EDMA_DS, port_mmio + EDMA_CMD); + + /* Wait for the chip to confirm eDMA is off. */ + for (i = 10000; i > 0; i--) { + u32 reg = readl(port_mmio + EDMA_CMD); + if (!(reg & EDMA_EN)) + return 0; + udelay(10); + } + return -EIO; +} + +static int mv_stop_edma(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + int err = 0; + + if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) + return 0; + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + mv_wait_for_edma_empty_idle(ap); + if (mv_stop_edma_engine(port_mmio)) { + ata_port_err(ap, "Unable to stop eDMA\n"); + err = -EIO; + } + mv_edma_cfg(ap, 0, 0); + return err; +} + +#ifdef ATA_DEBUG +static void mv_dump_mem(void __iomem *start, unsigned bytes) +{ + int b, w; + for (b = 0; b < bytes; ) { + DPRINTK("%p: ", start + b); + for (w = 0; b < bytes && w < 4; w++) { + printk("%08x ", readl(start + b)); + b += sizeof(u32); + } + printk("\n"); + } +} +#endif +#if defined(ATA_DEBUG) || defined(CONFIG_PCI) +static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes) +{ +#ifdef ATA_DEBUG + int b, w; + u32 dw; + for (b = 0; b < bytes; ) { + DPRINTK("%02x: ", b); + for (w = 0; b < bytes && w < 4; w++) { + (void) pci_read_config_dword(pdev, b, &dw); + printk("%08x ", dw); + b += sizeof(u32); + } + printk("\n"); + } +#endif +} +#endif +static void mv_dump_all_regs(void __iomem *mmio_base, int port, + struct pci_dev *pdev) +{ +#ifdef ATA_DEBUG + void __iomem *hc_base = mv_hc_base(mmio_base, + port >> MV_PORT_HC_SHIFT); + void __iomem *port_base; + int start_port, num_ports, p, start_hc, num_hcs, hc; + + if (0 > port) { + start_hc = start_port = 0; + num_ports = 8; /* shld be benign for 4 port devs */ + num_hcs = 2; + } else { + start_hc = port >> MV_PORT_HC_SHIFT; + start_port = port; + num_ports = num_hcs = 1; + } + DPRINTK("All registers for port(s) %u-%u:\n", start_port, + num_ports > 1 ? num_ports - 1 : start_port); + + if (NULL != pdev) { + DPRINTK("PCI config space regs:\n"); + mv_dump_pci_cfg(pdev, 0x68); + } + DPRINTK("PCI regs:\n"); + mv_dump_mem(mmio_base+0xc00, 0x3c); + mv_dump_mem(mmio_base+0xd00, 0x34); + mv_dump_mem(mmio_base+0xf00, 0x4); + mv_dump_mem(mmio_base+0x1d00, 0x6c); + for (hc = start_hc; hc < start_hc + num_hcs; hc++) { + hc_base = mv_hc_base(mmio_base, hc); + DPRINTK("HC regs (HC %i):\n", hc); + mv_dump_mem(hc_base, 0x1c); + } + for (p = start_port; p < start_port + num_ports; p++) { + port_base = mv_port_base(mmio_base, p); + DPRINTK("EDMA regs (port %i):\n", p); + mv_dump_mem(port_base, 0x54); + DPRINTK("SATA regs (port %i):\n", p); + mv_dump_mem(port_base+0x300, 0x60); + } +#endif +} + +static unsigned int mv_scr_offset(unsigned int sc_reg_in) +{ + unsigned int ofs; + + switch (sc_reg_in) { + case SCR_STATUS: + case SCR_CONTROL: + case SCR_ERROR: + ofs = SATA_STATUS + (sc_reg_in * sizeof(u32)); + break; + case SCR_ACTIVE: + ofs = SATA_ACTIVE; /* active is not with the others */ + break; + default: + ofs = 0xffffffffU; + break; + } + return ofs; +} + +static int mv_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val) +{ + unsigned int ofs = mv_scr_offset(sc_reg_in); + + if (ofs != 0xffffffffU) { + *val = readl(mv_ap_base(link->ap) + ofs); + return 0; + } else + return -EINVAL; +} + +static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val) +{ + unsigned int ofs = mv_scr_offset(sc_reg_in); + + if (ofs != 0xffffffffU) { + void __iomem *addr = mv_ap_base(link->ap) + ofs; + struct mv_host_priv *hpriv = link->ap->host->private_data; + if (sc_reg_in == SCR_CONTROL) { + /* + * Workaround for 88SX60x1 FEr SATA#26: + * + * COMRESETs have to take care not to accidentally + * put the drive to sleep when writing SCR_CONTROL. + * Setting bits 12..15 prevents this problem. + * + * So if we see an outbound COMMRESET, set those bits. + * Ditto for the followup write that clears the reset. + * + * The proprietary driver does this for + * all chip versions, and so do we. + */ + if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1) + val |= 0xf000; + + if (hpriv->hp_flags & MV_HP_FIX_LP_PHY_CTL) { + void __iomem *lp_phy_addr = + mv_ap_base(link->ap) + LP_PHY_CTL; + /* + * Set PHY speed according to SControl speed. + */ + u32 lp_phy_val = + LP_PHY_CTL_PIN_PU_PLL | + LP_PHY_CTL_PIN_PU_RX | + LP_PHY_CTL_PIN_PU_TX; + + if ((val & 0xf0) != 0x10) + lp_phy_val |= + LP_PHY_CTL_GEN_TX_3G | + LP_PHY_CTL_GEN_RX_3G; + + writelfl(lp_phy_val, lp_phy_addr); + } + } + writelfl(val, addr); + return 0; + } else + return -EINVAL; +} + +static void mv6_dev_config(struct ata_device *adev) +{ + /* + * Deal with Gen-II ("mv6") hardware quirks/restrictions: + * + * Gen-II does not support NCQ over a port multiplier + * (no FIS-based switching). + */ + if (adev->flags & ATA_DFLAG_NCQ) { + if (sata_pmp_attached(adev->link->ap)) { + adev->flags &= ~ATA_DFLAG_NCQ; + ata_dev_info(adev, + "NCQ disabled for command-based switching\n"); + } + } +} + +static int mv_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_link *link = qc->dev->link; + struct ata_port *ap = link->ap; + struct mv_port_priv *pp = ap->private_data; + + /* + * Don't allow new commands if we're in a delayed EH state + * for NCQ and/or FIS-based switching. + */ + if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH) + return ATA_DEFER_PORT; + + /* PIO commands need exclusive link: no other commands [DMA or PIO] + * can run concurrently. + * set excl_link when we want to send a PIO command in DMA mode + * or a non-NCQ command in NCQ mode. + * When we receive a command from that link, and there are no + * outstanding commands, mark a flag to clear excl_link and let + * the command go through. + */ + if (unlikely(ap->excl_link)) { + if (link == ap->excl_link) { + if (ap->nr_active_links) + return ATA_DEFER_PORT; + qc->flags |= ATA_QCFLAG_CLEAR_EXCL; + return 0; + } else + return ATA_DEFER_PORT; + } + + /* + * If the port is completely idle, then allow the new qc. + */ + if (ap->nr_active_links == 0) + return 0; + + /* + * The port is operating in host queuing mode (EDMA) with NCQ + * enabled, allow multiple NCQ commands. EDMA also allows + * queueing multiple DMA commands but libata core currently + * doesn't allow it. + */ + if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) && + (pp->pp_flags & MV_PP_FLAG_NCQ_EN)) { + if (ata_is_ncq(qc->tf.protocol)) + return 0; + else { + ap->excl_link = link; + return ATA_DEFER_PORT; + } + } + + return ATA_DEFER_PORT; +} + +static void mv_config_fbs(struct ata_port *ap, int want_ncq, int want_fbs) +{ + struct mv_port_priv *pp = ap->private_data; + void __iomem *port_mmio; + + u32 fiscfg, *old_fiscfg = &pp->cached.fiscfg; + u32 ltmode, *old_ltmode = &pp->cached.ltmode; + u32 haltcond, *old_haltcond = &pp->cached.haltcond; + + ltmode = *old_ltmode & ~LTMODE_BIT8; + haltcond = *old_haltcond | EDMA_ERR_DEV; + + if (want_fbs) { + fiscfg = *old_fiscfg | FISCFG_SINGLE_SYNC; + ltmode = *old_ltmode | LTMODE_BIT8; + if (want_ncq) + haltcond &= ~EDMA_ERR_DEV; + else + fiscfg |= FISCFG_WAIT_DEV_ERR; + } else { + fiscfg = *old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR); + } + + port_mmio = mv_ap_base(ap); + mv_write_cached_reg(port_mmio + FISCFG, old_fiscfg, fiscfg); + mv_write_cached_reg(port_mmio + LTMODE, old_ltmode, ltmode); + mv_write_cached_reg(port_mmio + EDMA_HALTCOND, old_haltcond, haltcond); +} + +static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) +{ + struct mv_host_priv *hpriv = ap->host->private_data; + u32 old, new; + + /* workaround for 88SX60x1 FEr SATA#25 (part 1) */ + old = readl(hpriv->base + GPIO_PORT_CTL); + if (want_ncq) + new = old | (1 << 22); + else + new = old & ~(1 << 22); + if (new != old) + writel(new, hpriv->base + GPIO_PORT_CTL); +} + +/** + * mv_bmdma_enable - set a magic bit on GEN_IIE to allow bmdma + * @ap: Port being initialized + * + * There are two DMA modes on these chips: basic DMA, and EDMA. + * + * Bit-0 of the "EDMA RESERVED" register enables/disables use + * of basic DMA on the GEN_IIE versions of the chips. + * + * This bit survives EDMA resets, and must be set for basic DMA + * to function, and should be cleared when EDMA is active. + */ +static void mv_bmdma_enable_iie(struct ata_port *ap, int enable_bmdma) +{ + struct mv_port_priv *pp = ap->private_data; + u32 new, *old = &pp->cached.unknown_rsvd; + + if (enable_bmdma) + new = *old | 1; + else + new = *old & ~1; + mv_write_cached_reg(mv_ap_base(ap) + EDMA_UNKNOWN_RSVD, old, new); +} + +/* + * SOC chips have an issue whereby the HDD LEDs don't always blink + * during I/O when NCQ is enabled. Enabling a special "LED blink" mode + * of the SOC takes care of it, generating a steady blink rate when + * any drive on the chip is active. + * + * Unfortunately, the blink mode is a global hardware setting for the SOC, + * so we must use it whenever at least one port on the SOC has NCQ enabled. + * + * We turn "LED blink" off when NCQ is not in use anywhere, because the normal + * LED operation works then, and provides better (more accurate) feedback. + * + * Note that this code assumes that an SOC never has more than one HC onboard. + */ +static void mv_soc_led_blink_enable(struct ata_port *ap) +{ + struct ata_host *host = ap->host; + struct mv_host_priv *hpriv = host->private_data; + void __iomem *hc_mmio; + u32 led_ctrl; + + if (hpriv->hp_flags & MV_HP_QUIRK_LED_BLINK_EN) + return; + hpriv->hp_flags |= MV_HP_QUIRK_LED_BLINK_EN; + hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no); + led_ctrl = readl(hc_mmio + SOC_LED_CTRL); + writel(led_ctrl | SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL); +} + +static void mv_soc_led_blink_disable(struct ata_port *ap) +{ + struct ata_host *host = ap->host; + struct mv_host_priv *hpriv = host->private_data; + void __iomem *hc_mmio; + u32 led_ctrl; + unsigned int port; + + if (!(hpriv->hp_flags & MV_HP_QUIRK_LED_BLINK_EN)) + return; + + /* disable led-blink only if no ports are using NCQ */ + for (port = 0; port < hpriv->n_ports; port++) { + struct ata_port *this_ap = host->ports[port]; + struct mv_port_priv *pp = this_ap->private_data; + + if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) + return; + } + + hpriv->hp_flags &= ~MV_HP_QUIRK_LED_BLINK_EN; + hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no); + led_ctrl = readl(hc_mmio + SOC_LED_CTRL); + writel(led_ctrl & ~SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL); +} + +static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) +{ + u32 cfg; + struct mv_port_priv *pp = ap->private_data; + struct mv_host_priv *hpriv = ap->host->private_data; + void __iomem *port_mmio = mv_ap_base(ap); + + /* set up non-NCQ EDMA configuration */ + cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */ + pp->pp_flags &= + ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY); + + if (IS_GEN_I(hpriv)) + cfg |= (1 << 8); /* enab config burst size mask */ + + else if (IS_GEN_II(hpriv)) { + cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN; + mv_60x1_errata_sata25(ap, want_ncq); + + } else if (IS_GEN_IIE(hpriv)) { + int want_fbs = sata_pmp_attached(ap); + /* + * Possible future enhancement: + * + * The chip can use FBS with non-NCQ, if we allow it, + * But first we need to have the error handling in place + * for this mode (datasheet section 7.3.15.4.2.3). + * So disallow non-NCQ FBS for now. + */ + want_fbs &= want_ncq; + + mv_config_fbs(ap, want_ncq, want_fbs); + + if (want_fbs) { + pp->pp_flags |= MV_PP_FLAG_FBS_EN; + cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */ + } + + cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */ + if (want_edma) { + cfg |= (1 << 22); /* enab 4-entry host queue cache */ + if (!IS_SOC(hpriv)) + cfg |= (1 << 18); /* enab early completion */ + } + if (hpriv->hp_flags & MV_HP_CUT_THROUGH) + cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ + mv_bmdma_enable_iie(ap, !want_edma); + + if (IS_SOC(hpriv)) { + if (want_ncq) + mv_soc_led_blink_enable(ap); + else + mv_soc_led_blink_disable(ap); + } + } + + if (want_ncq) { + cfg |= EDMA_CFG_NCQ; + pp->pp_flags |= MV_PP_FLAG_NCQ_EN; + } + + writelfl(cfg, port_mmio + EDMA_CFG); +} + +static void mv_port_free_dma_mem(struct ata_port *ap) +{ + struct mv_host_priv *hpriv = ap->host->private_data; + struct mv_port_priv *pp = ap->private_data; + int tag; + + if (pp->crqb) { + dma_pool_free(hpriv->crqb_pool, pp->crqb, pp->crqb_dma); + pp->crqb = NULL; + } + if (pp->crpb) { + dma_pool_free(hpriv->crpb_pool, pp->crpb, pp->crpb_dma); + pp->crpb = NULL; + } + /* + * For GEN_I, there's no NCQ, so we have only a single sg_tbl. + * For later hardware, we have one unique sg_tbl per NCQ tag. + */ + for (tag = 0; tag < MV_MAX_Q_DEPTH; ++tag) { + if (pp->sg_tbl[tag]) { + if (tag == 0 || !IS_GEN_I(hpriv)) + dma_pool_free(hpriv->sg_tbl_pool, + pp->sg_tbl[tag], + pp->sg_tbl_dma[tag]); + pp->sg_tbl[tag] = NULL; + } + } +} + +/** + * mv_port_start - Port specific init/start routine. + * @ap: ATA channel to manipulate + * + * Allocate and point to DMA memory, init port private memory, + * zero indices. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct mv_host_priv *hpriv = ap->host->private_data; + struct mv_port_priv *pp; + unsigned long flags; + int tag; + + pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + ap->private_data = pp; + + pp->crqb = dma_pool_alloc(hpriv->crqb_pool, GFP_KERNEL, &pp->crqb_dma); + if (!pp->crqb) + return -ENOMEM; + memset(pp->crqb, 0, MV_CRQB_Q_SZ); + + pp->crpb = dma_pool_alloc(hpriv->crpb_pool, GFP_KERNEL, &pp->crpb_dma); + if (!pp->crpb) + goto out_port_free_dma_mem; + memset(pp->crpb, 0, MV_CRPB_Q_SZ); + + /* 6041/6081 Rev. "C0" (and newer) are okay with async notify */ + if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0) + ap->flags |= ATA_FLAG_AN; + /* + * For GEN_I, there's no NCQ, so we only allocate a single sg_tbl. + * For later hardware, we need one unique sg_tbl per NCQ tag. + */ + for (tag = 0; tag < MV_MAX_Q_DEPTH; ++tag) { + if (tag == 0 || !IS_GEN_I(hpriv)) { + pp->sg_tbl[tag] = dma_pool_alloc(hpriv->sg_tbl_pool, + GFP_KERNEL, &pp->sg_tbl_dma[tag]); + if (!pp->sg_tbl[tag]) + goto out_port_free_dma_mem; + } else { + pp->sg_tbl[tag] = pp->sg_tbl[0]; + pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0]; + } + } + + spin_lock_irqsave(ap->lock, flags); + mv_save_cached_regs(ap); + mv_edma_cfg(ap, 0, 0); + spin_unlock_irqrestore(ap->lock, flags); + + return 0; + +out_port_free_dma_mem: + mv_port_free_dma_mem(ap); + return -ENOMEM; +} + +/** + * mv_port_stop - Port specific cleanup/stop routine. + * @ap: ATA channel to manipulate + * + * Stop DMA, cleanup port memory. + * + * LOCKING: + * This routine uses the host lock to protect the DMA stop. + */ +static void mv_port_stop(struct ata_port *ap) +{ + unsigned long flags; + + spin_lock_irqsave(ap->lock, flags); + mv_stop_edma(ap); + mv_enable_port_irqs(ap, 0); + spin_unlock_irqrestore(ap->lock, flags); + mv_port_free_dma_mem(ap); +} + +/** + * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries + * @qc: queued command whose SG list to source from + * + * Populate the SG list and mark the last entry. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_fill_sg(struct ata_queued_cmd *qc) +{ + struct mv_port_priv *pp = qc->ap->private_data; + struct scatterlist *sg; + struct mv_sg *mv_sg, *last_sg = NULL; + unsigned int si; + + mv_sg = pp->sg_tbl[qc->tag]; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + dma_addr_t addr = sg_dma_address(sg); + u32 sg_len = sg_dma_len(sg); + + while (sg_len) { + u32 offset = addr & 0xffff; + u32 len = sg_len; + + if (offset + len > 0x10000) + len = 0x10000 - offset; + + mv_sg->addr = cpu_to_le32(addr & 0xffffffff); + mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); + mv_sg->flags_size = cpu_to_le32(len & 0xffff); + mv_sg->reserved = 0; + + sg_len -= len; + addr += len; + + last_sg = mv_sg; + mv_sg++; + } + } + + if (likely(last_sg)) + last_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL); + mb(); /* ensure data structure is visible to the chipset */ +} + +static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) +{ + u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS | + (last ? CRQB_CMD_LAST : 0); + *cmdw = cpu_to_le16(tmp); +} + +/** + * mv_sff_irq_clear - Clear hardware interrupt after DMA. + * @ap: Port associated with this ATA transaction. + * + * We need this only for ATAPI bmdma transactions, + * as otherwise we experience spurious interrupts + * after libata-sff handles the bmdma interrupts. + */ +static void mv_sff_irq_clear(struct ata_port *ap) +{ + mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), ERR_IRQ); +} + +/** + * mv_check_atapi_dma - Filter ATAPI cmds which are unsuitable for DMA. + * @qc: queued command to check for chipset/DMA compatibility. + * + * The bmdma engines cannot handle speculative data sizes + * (bytecount under/over flow). So only allow DMA for + * data transfer commands with known data sizes. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + + if (scmd) { + switch (scmd->cmnd[0]) { + case READ_6: + case READ_10: + case READ_12: + case WRITE_6: + case WRITE_10: + case WRITE_12: + case GPCMD_READ_CD: + case GPCMD_SEND_DVD_STRUCTURE: + case GPCMD_SEND_CUE_SHEET: + return 0; /* DMA is safe */ + } + } + return -EOPNOTSUPP; /* use PIO instead */ +} + +/** + * mv_bmdma_setup - Set up BMDMA transaction + * @qc: queued command to prepare DMA for. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + + mv_fill_sg(qc); + + /* clear all DMA cmd bits */ + writel(0, port_mmio + BMDMA_CMD); + + /* load PRD table addr. */ + writel((pp->sg_tbl_dma[qc->tag] >> 16) >> 16, + port_mmio + BMDMA_PRD_HIGH); + writelfl(pp->sg_tbl_dma[qc->tag], + port_mmio + BMDMA_PRD_LOW); + + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} + +/** + * mv_bmdma_start - Start a BMDMA transaction + * @qc: queued command to start DMA on. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u32 cmd = (rw ? 0 : ATA_DMA_WR) | ATA_DMA_START; + + /* start host DMA transaction */ + writelfl(cmd, port_mmio + BMDMA_CMD); +} + +/** + * mv_bmdma_stop - Stop BMDMA transfer + * @qc: queued command to stop DMA on. + * + * Clears the ATA_DMA_START flag in the bmdma control register + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_stop_ap(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 cmd; + + /* clear start/stop bit */ + cmd = readl(port_mmio + BMDMA_CMD); + if (cmd & ATA_DMA_START) { + cmd &= ~ATA_DMA_START; + writelfl(cmd, port_mmio + BMDMA_CMD); + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_sff_dma_pause(ap); + } +} + +static void mv_bmdma_stop(struct ata_queued_cmd *qc) +{ + mv_bmdma_stop_ap(qc->ap); +} + +/** + * mv_bmdma_status - Read BMDMA status + * @ap: port for which to retrieve DMA status. + * + * Read and return equivalent of the sff BMDMA status register. + * + * LOCKING: + * Inherited from caller. + */ +static u8 mv_bmdma_status(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 reg, status; + + /* + * Other bits are valid only if ATA_DMA_ACTIVE==0, + * and the ATA_DMA_INTR bit doesn't exist. + */ + reg = readl(port_mmio + BMDMA_STATUS); + if (reg & ATA_DMA_ACTIVE) + status = ATA_DMA_ACTIVE; + else if (reg & ATA_DMA_ERR) + status = (reg & ATA_DMA_ERR) | ATA_DMA_INTR; + else { + /* + * Just because DMA_ACTIVE is 0 (DMA completed), + * this does _not_ mean the device is "done". + * So we should not yet be signalling ATA_DMA_INTR + * in some cases. Eg. DSM/TRIM, and perhaps others. + */ + mv_bmdma_stop_ap(ap); + if (ioread8(ap->ioaddr.altstatus_addr) & ATA_BUSY) + status = 0; + else + status = ATA_DMA_INTR; + } + return status; +} + +static void mv_rw_multi_errata_sata24(struct ata_queued_cmd *qc) +{ + struct ata_taskfile *tf = &qc->tf; + /* + * Workaround for 88SX60x1 FEr SATA#24. + * + * Chip may corrupt WRITEs if multi_count >= 4kB. + * Note that READs are unaffected. + * + * It's not clear if this errata really means "4K bytes", + * or if it always happens for multi_count > 7 + * regardless of device sector_size. + * + * So, for safety, any write with multi_count > 7 + * gets converted here into a regular PIO write instead: + */ + if ((tf->flags & ATA_TFLAG_WRITE) && is_multi_taskfile(tf)) { + if (qc->dev->multi_count > 7) { + switch (tf->command) { + case ATA_CMD_WRITE_MULTI: + tf->command = ATA_CMD_PIO_WRITE; + break; + case ATA_CMD_WRITE_MULTI_FUA_EXT: + tf->flags &= ~ATA_TFLAG_FUA; /* ugh */ + /* fall through */ + case ATA_CMD_WRITE_MULTI_EXT: + tf->command = ATA_CMD_PIO_WRITE_EXT; + break; + } + } + } +} + +/** + * mv_qc_prep - Host specific command preparation. + * @qc: queued command to prepare + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it handles prep of the CRQB + * (command request block), does some sanity checking, and calls + * the SG load routine. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mv_port_priv *pp = ap->private_data; + __le16 *cw; + struct ata_taskfile *tf = &qc->tf; + u16 flags = 0; + unsigned in_index; + + switch (tf->protocol) { + case ATA_PROT_DMA: + if (tf->command == ATA_CMD_DSM) + return; + /* fall-thru */ + case ATA_PROT_NCQ: + break; /* continue below */ + case ATA_PROT_PIO: + mv_rw_multi_errata_sata24(qc); + return; + default: + return; + } + + /* Fill in command request block + */ + if (!(tf->flags & ATA_TFLAG_WRITE)) + flags |= CRQB_FLAG_READ; + WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); + flags |= qc->tag << CRQB_TAG_SHIFT; + flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT; + + /* get current queue index from software */ + in_index = pp->req_idx; + + pp->crqb[in_index].sg_addr = + cpu_to_le32(pp->sg_tbl_dma[qc->tag] & 0xffffffff); + pp->crqb[in_index].sg_addr_hi = + cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16); + pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags); + + cw = &pp->crqb[in_index].ata_cmd[0]; + + /* Sadly, the CRQB cannot accommodate all registers--there are + * only 11 bytes...so we must pick and choose required + * registers based on the command. So, we drop feature and + * hob_feature for [RW] DMA commands, but they are needed for + * NCQ. NCQ will drop hob_nsect, which is not needed there + * (nsect is used only for the tag; feat/hob_feat hold true nsect). + */ + switch (tf->command) { + case ATA_CMD_READ: + case ATA_CMD_READ_EXT: + case ATA_CMD_WRITE: + case ATA_CMD_WRITE_EXT: + case ATA_CMD_WRITE_FUA_EXT: + mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0); + break; + case ATA_CMD_FPDMA_READ: + case ATA_CMD_FPDMA_WRITE: + mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0); + mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0); + break; + default: + /* The only other commands EDMA supports in non-queued and + * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none + * of which are defined/used by Linux. If we get here, this + * driver needs work. + * + * FIXME: modify libata to give qc_prep a return value and + * return error here. + */ + BUG_ON(tf->command); + break; + } + mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0); + mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0); + mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0); + mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0); + mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0); + mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */ + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + mv_fill_sg(qc); +} + +/** + * mv_qc_prep_iie - Host specific command preparation. + * @qc: queued command to prepare + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it handles prep of the CRQB + * (command request block), does some sanity checking, and calls + * the SG load routine. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_qc_prep_iie(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mv_port_priv *pp = ap->private_data; + struct mv_crqb_iie *crqb; + struct ata_taskfile *tf = &qc->tf; + unsigned in_index; + u32 flags = 0; + + if ((tf->protocol != ATA_PROT_DMA) && + (tf->protocol != ATA_PROT_NCQ)) + return; + if (tf->command == ATA_CMD_DSM) + return; /* use bmdma for this */ + + /* Fill in Gen IIE command request block */ + if (!(tf->flags & ATA_TFLAG_WRITE)) + flags |= CRQB_FLAG_READ; + + WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); + flags |= qc->tag << CRQB_TAG_SHIFT; + flags |= qc->tag << CRQB_HOSTQ_SHIFT; + flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT; + + /* get current queue index from software */ + in_index = pp->req_idx; + + crqb = (struct mv_crqb_iie *) &pp->crqb[in_index]; + crqb->addr = cpu_to_le32(pp->sg_tbl_dma[qc->tag] & 0xffffffff); + crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16); + crqb->flags = cpu_to_le32(flags); + + crqb->ata_cmd[0] = cpu_to_le32( + (tf->command << 16) | + (tf->feature << 24) + ); + crqb->ata_cmd[1] = cpu_to_le32( + (tf->lbal << 0) | + (tf->lbam << 8) | + (tf->lbah << 16) | + (tf->device << 24) + ); + crqb->ata_cmd[2] = cpu_to_le32( + (tf->hob_lbal << 0) | + (tf->hob_lbam << 8) | + (tf->hob_lbah << 16) | + (tf->hob_feature << 24) + ); + crqb->ata_cmd[3] = cpu_to_le32( + (tf->nsect << 0) | + (tf->hob_nsect << 8) + ); + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + mv_fill_sg(qc); +} + +/** + * mv_sff_check_status - fetch device status, if valid + * @ap: ATA port to fetch status from + * + * When using command issue via mv_qc_issue_fis(), + * the initial ATA_BUSY state does not show up in the + * ATA status (shadow) register. This can confuse libata! + * + * So we have a hook here to fake ATA_BUSY for that situation, + * until the first time a BUSY, DRQ, or ERR bit is seen. + * + * The rest of the time, it simply returns the ATA status register. + */ +static u8 mv_sff_check_status(struct ata_port *ap) +{ + u8 stat = ioread8(ap->ioaddr.status_addr); + struct mv_port_priv *pp = ap->private_data; + + if (pp->pp_flags & MV_PP_FLAG_FAKE_ATA_BUSY) { + if (stat & (ATA_BUSY | ATA_DRQ | ATA_ERR)) + pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY; + else + stat = ATA_BUSY; + } + return stat; +} + +/** + * mv_send_fis - Send a FIS, using the "Vendor-Unique FIS" register + * @fis: fis to be sent + * @nwords: number of 32-bit words in the fis + */ +static unsigned int mv_send_fis(struct ata_port *ap, u32 *fis, int nwords) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 ifctl, old_ifctl, ifstat; + int i, timeout = 200, final_word = nwords - 1; + + /* Initiate FIS transmission mode */ + old_ifctl = readl(port_mmio + SATA_IFCTL); + ifctl = 0x100 | (old_ifctl & 0xf); + writelfl(ifctl, port_mmio + SATA_IFCTL); + + /* Send all words of the FIS except for the final word */ + for (i = 0; i < final_word; ++i) + writel(fis[i], port_mmio + VENDOR_UNIQUE_FIS); + + /* Flag end-of-transmission, and then send the final word */ + writelfl(ifctl | 0x200, port_mmio + SATA_IFCTL); + writelfl(fis[final_word], port_mmio + VENDOR_UNIQUE_FIS); + + /* + * Wait for FIS transmission to complete. + * This typically takes just a single iteration. + */ + do { + ifstat = readl(port_mmio + SATA_IFSTAT); + } while (!(ifstat & 0x1000) && --timeout); + + /* Restore original port configuration */ + writelfl(old_ifctl, port_mmio + SATA_IFCTL); + + /* See if it worked */ + if ((ifstat & 0x3000) != 0x1000) { + ata_port_warn(ap, "%s transmission error, ifstat=%08x\n", + __func__, ifstat); + return AC_ERR_OTHER; + } + return 0; +} + +/** + * mv_qc_issue_fis - Issue a command directly as a FIS + * @qc: queued command to start + * + * Note that the ATA shadow registers are not updated + * after command issue, so the device will appear "READY" + * if polled, even while it is BUSY processing the command. + * + * So we use a status hook to fake ATA_BUSY until the drive changes state. + * + * Note: we don't get updated shadow regs on *completion* + * of non-data commands. So avoid sending them via this function, + * as they will appear to have completed immediately. + * + * GEN_IIE has special registers that we could get the result tf from, + * but earlier chipsets do not. For now, we ignore those registers. + */ +static unsigned int mv_qc_issue_fis(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mv_port_priv *pp = ap->private_data; + struct ata_link *link = qc->dev->link; + u32 fis[5]; + int err = 0; + + ata_tf_to_fis(&qc->tf, link->pmp, 1, (void *)fis); + err = mv_send_fis(ap, fis, ARRAY_SIZE(fis)); + if (err) + return err; + + switch (qc->tf.protocol) { + case ATAPI_PROT_PIO: + pp->pp_flags |= MV_PP_FLAG_FAKE_ATA_BUSY; + /* fall through */ + case ATAPI_PROT_NODATA: + ap->hsm_task_state = HSM_ST_FIRST; + break; + case ATA_PROT_PIO: + pp->pp_flags |= MV_PP_FLAG_FAKE_ATA_BUSY; + if (qc->tf.flags & ATA_TFLAG_WRITE) + ap->hsm_task_state = HSM_ST_FIRST; + else + ap->hsm_task_state = HSM_ST; + break; + default: + ap->hsm_task_state = HSM_ST_LAST; + break; + } + + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_sff_queue_pio_task(link, 0); + return 0; +} + +/** + * mv_qc_issue - Initiate a command to the host + * @qc: queued command to start + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it sanity checks our local + * caches of the request producer/consumer indices then enables + * DMA and bumps the request producer index. + * + * LOCKING: + * Inherited from caller. + */ +static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) +{ + static int limit_warnings = 10; + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + u32 in_index; + unsigned int port_irqs; + + pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY; /* paranoia */ + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + if (qc->tf.command == ATA_CMD_DSM) { + if (!ap->ops->bmdma_setup) /* no bmdma on GEN_I */ + return AC_ERR_OTHER; + break; /* use bmdma for this */ + } + /* fall thru */ + case ATA_PROT_NCQ: + mv_start_edma(ap, port_mmio, pp, qc->tf.protocol); + pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK; + in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT; + + /* Write the request in pointer to kick the EDMA to life */ + writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index, + port_mmio + EDMA_REQ_Q_IN_PTR); + return 0; + + case ATA_PROT_PIO: + /* + * Errata SATA#16, SATA#24: warn if multiple DRQs expected. + * + * Someday, we might implement special polling workarounds + * for these, but it all seems rather unnecessary since we + * normally use only DMA for commands which transfer more + * than a single block of data. + * + * Much of the time, this could just work regardless. + * So for now, just log the incident, and allow the attempt. + */ + if (limit_warnings > 0 && (qc->nbytes / qc->sect_size) > 1) { + --limit_warnings; + ata_link_warn(qc->dev->link, DRV_NAME + ": attempting PIO w/multiple DRQ: " + "this may fail due to h/w errata\n"); + } + /* drop through */ + case ATA_PROT_NODATA: + case ATAPI_PROT_PIO: + case ATAPI_PROT_NODATA: + if (ap->flags & ATA_FLAG_PIO_POLLING) + qc->tf.flags |= ATA_TFLAG_POLLING; + break; + } + + if (qc->tf.flags & ATA_TFLAG_POLLING) + port_irqs = ERR_IRQ; /* mask device interrupt when polling */ + else + port_irqs = ERR_IRQ | DONE_IRQ; /* unmask all interrupts */ + + /* + * We're about to send a non-EDMA capable command to the + * port. Turn off EDMA so there won't be problems accessing + * shadow block, etc registers. + */ + mv_stop_edma(ap); + mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs); + mv_pmp_select(ap, qc->dev->link->pmp); + + if (qc->tf.command == ATA_CMD_READ_LOG_EXT) { + struct mv_host_priv *hpriv = ap->host->private_data; + /* + * Workaround for 88SX60x1 FEr SATA#25 (part 2). + * + * After any NCQ error, the READ_LOG_EXT command + * from libata-eh *must* use mv_qc_issue_fis(). + * Otherwise it might fail, due to chip errata. + * + * Rather than special-case it, we'll just *always* + * use this method here for READ_LOG_EXT, making for + * easier testing. + */ + if (IS_GEN_II(hpriv)) + return mv_qc_issue_fis(qc); + } + return ata_bmdma_qc_issue(qc); +} + +static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap) +{ + struct mv_port_priv *pp = ap->private_data; + struct ata_queued_cmd *qc; + + if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) + return NULL; + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && !(qc->tf.flags & ATA_TFLAG_POLLING)) + return qc; + return NULL; +} + +static void mv_pmp_error_handler(struct ata_port *ap) +{ + unsigned int pmp, pmp_map; + struct mv_port_priv *pp = ap->private_data; + + if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH) { + /* + * Perform NCQ error analysis on failed PMPs + * before we freeze the port entirely. + * + * The failed PMPs are marked earlier by mv_pmp_eh_prep(). + */ + pmp_map = pp->delayed_eh_pmp_map; + pp->pp_flags &= ~MV_PP_FLAG_DELAYED_EH; + for (pmp = 0; pmp_map != 0; pmp++) { + unsigned int this_pmp = (1 << pmp); + if (pmp_map & this_pmp) { + struct ata_link *link = &ap->pmp_link[pmp]; + pmp_map &= ~this_pmp; + ata_eh_analyze_ncq_error(link); + } + } + ata_port_freeze(ap); + } + sata_pmp_error_handler(ap); +} + +static unsigned int mv_get_err_pmp_map(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + + return readl(port_mmio + SATA_TESTCTL) >> 16; +} + +static void mv_pmp_eh_prep(struct ata_port *ap, unsigned int pmp_map) +{ + struct ata_eh_info *ehi; + unsigned int pmp; + + /* + * Initialize EH info for PMPs which saw device errors + */ + ehi = &ap->link.eh_info; + for (pmp = 0; pmp_map != 0; pmp++) { + unsigned int this_pmp = (1 << pmp); + if (pmp_map & this_pmp) { + struct ata_link *link = &ap->pmp_link[pmp]; + + pmp_map &= ~this_pmp; + ehi = &link->eh_info; + ata_ehi_clear_desc(ehi); + ata_ehi_push_desc(ehi, "dev err"); + ehi->err_mask |= AC_ERR_DEV; + ehi->action |= ATA_EH_RESET; + ata_link_abort(link); + } + } +} + +static int mv_req_q_empty(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 in_ptr, out_ptr; + + in_ptr = (readl(port_mmio + EDMA_REQ_Q_IN_PTR) + >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; + out_ptr = (readl(port_mmio + EDMA_REQ_Q_OUT_PTR) + >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; + return (in_ptr == out_ptr); /* 1 == queue_is_empty */ +} + +static int mv_handle_fbs_ncq_dev_err(struct ata_port *ap) +{ + struct mv_port_priv *pp = ap->private_data; + int failed_links; + unsigned int old_map, new_map; + + /* + * Device error during FBS+NCQ operation: + * + * Set a port flag to prevent further I/O being enqueued. + * Leave the EDMA running to drain outstanding commands from this port. + * Perform the post-mortem/EH only when all responses are complete. + * Follow recovery sequence from 6042/7042 datasheet (7.3.15.4.2.2). + */ + if (!(pp->pp_flags & MV_PP_FLAG_DELAYED_EH)) { + pp->pp_flags |= MV_PP_FLAG_DELAYED_EH; + pp->delayed_eh_pmp_map = 0; + } + old_map = pp->delayed_eh_pmp_map; + new_map = old_map | mv_get_err_pmp_map(ap); + + if (old_map != new_map) { + pp->delayed_eh_pmp_map = new_map; + mv_pmp_eh_prep(ap, new_map & ~old_map); + } + failed_links = hweight16(new_map); + + ata_port_info(ap, + "%s: pmp_map=%04x qc_map=%04x failed_links=%d nr_active_links=%d\n", + __func__, pp->delayed_eh_pmp_map, + ap->qc_active, failed_links, + ap->nr_active_links); + + if (ap->nr_active_links <= failed_links && mv_req_q_empty(ap)) { + mv_process_crpb_entries(ap, pp); + mv_stop_edma(ap); + mv_eh_freeze(ap); + ata_port_info(ap, "%s: done\n", __func__); + return 1; /* handled */ + } + ata_port_info(ap, "%s: waiting\n", __func__); + return 1; /* handled */ +} + +static int mv_handle_fbs_non_ncq_dev_err(struct ata_port *ap) +{ + /* + * Possible future enhancement: + * + * FBS+non-NCQ operation is not yet implemented. + * See related notes in mv_edma_cfg(). + * + * Device error during FBS+non-NCQ operation: + * + * We need to snapshot the shadow registers for each failed command. + * Follow recovery sequence from 6042/7042 datasheet (7.3.15.4.2.3). + */ + return 0; /* not handled */ +} + +static int mv_handle_dev_err(struct ata_port *ap, u32 edma_err_cause) +{ + struct mv_port_priv *pp = ap->private_data; + + if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) + return 0; /* EDMA was not active: not handled */ + if (!(pp->pp_flags & MV_PP_FLAG_FBS_EN)) + return 0; /* FBS was not active: not handled */ + + if (!(edma_err_cause & EDMA_ERR_DEV)) + return 0; /* non DEV error: not handled */ + edma_err_cause &= ~EDMA_ERR_IRQ_TRANSIENT; + if (edma_err_cause & ~(EDMA_ERR_DEV | EDMA_ERR_SELF_DIS)) + return 0; /* other problems: not handled */ + + if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) { + /* + * EDMA should NOT have self-disabled for this case. + * If it did, then something is wrong elsewhere, + * and we cannot handle it here. + */ + if (edma_err_cause & EDMA_ERR_SELF_DIS) { + ata_port_warn(ap, "%s: err_cause=0x%x pp_flags=0x%x\n", + __func__, edma_err_cause, pp->pp_flags); + return 0; /* not handled */ + } + return mv_handle_fbs_ncq_dev_err(ap); + } else { + /* + * EDMA should have self-disabled for this case. + * If it did not, then something is wrong elsewhere, + * and we cannot handle it here. + */ + if (!(edma_err_cause & EDMA_ERR_SELF_DIS)) { + ata_port_warn(ap, "%s: err_cause=0x%x pp_flags=0x%x\n", + __func__, edma_err_cause, pp->pp_flags); + return 0; /* not handled */ + } + return mv_handle_fbs_non_ncq_dev_err(ap); + } + return 0; /* not handled */ +} + +static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled) +{ + struct ata_eh_info *ehi = &ap->link.eh_info; + char *when = "idle"; + + ata_ehi_clear_desc(ehi); + if (edma_was_enabled) { + when = "EDMA enabled"; + } else { + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && (qc->tf.flags & ATA_TFLAG_POLLING)) + when = "polling"; + } + ata_ehi_push_desc(ehi, "unexpected device interrupt while %s", when); + ehi->err_mask |= AC_ERR_OTHER; + ehi->action |= ATA_EH_RESET; + ata_port_freeze(ap); +} + +/** + * mv_err_intr - Handle error interrupts on the port + * @ap: ATA channel to manipulate + * + * Most cases require a full reset of the chip's state machine, + * which also performs a COMRESET. + * Also, if the port disabled DMA, update our cached copy to match. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_err_intr(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 edma_err_cause, eh_freeze_mask, serr = 0; + u32 fis_cause = 0; + struct mv_port_priv *pp = ap->private_data; + struct mv_host_priv *hpriv = ap->host->private_data; + unsigned int action = 0, err_mask = 0; + struct ata_eh_info *ehi = &ap->link.eh_info; + struct ata_queued_cmd *qc; + int abort = 0; + + /* + * Read and clear the SError and err_cause bits. + * For GenIIe, if EDMA_ERR_TRANS_IRQ_7 is set, we also must read/clear + * the FIS_IRQ_CAUSE register before clearing edma_err_cause. + */ + sata_scr_read(&ap->link, SCR_ERROR, &serr); + sata_scr_write_flush(&ap->link, SCR_ERROR, serr); + + edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE); + if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) { + fis_cause = readl(port_mmio + FIS_IRQ_CAUSE); + writelfl(~fis_cause, port_mmio + FIS_IRQ_CAUSE); + } + writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE); + + if (edma_err_cause & EDMA_ERR_DEV) { + /* + * Device errors during FIS-based switching operation + * require special handling. + */ + if (mv_handle_dev_err(ap, edma_err_cause)) + return; + } + + qc = mv_get_active_qc(ap); + ata_ehi_clear_desc(ehi); + ata_ehi_push_desc(ehi, "edma_err_cause=%08x pp_flags=%08x", + edma_err_cause, pp->pp_flags); + + if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) { + ata_ehi_push_desc(ehi, "fis_cause=%08x", fis_cause); + if (fis_cause & FIS_IRQ_CAUSE_AN) { + u32 ec = edma_err_cause & + ~(EDMA_ERR_TRANS_IRQ_7 | EDMA_ERR_IRQ_TRANSIENT); + sata_async_notification(ap); + if (!ec) + return; /* Just an AN; no need for the nukes */ + ata_ehi_push_desc(ehi, "SDB notify"); + } + } + /* + * All generations share these EDMA error cause bits: + */ + if (edma_err_cause & EDMA_ERR_DEV) { + err_mask |= AC_ERR_DEV; + action |= ATA_EH_RESET; + ata_ehi_push_desc(ehi, "dev error"); + } + if (edma_err_cause & (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR | + EDMA_ERR_CRQB_PAR | EDMA_ERR_CRPB_PAR | + EDMA_ERR_INTRL_PAR)) { + err_mask |= AC_ERR_ATA_BUS; + action |= ATA_EH_RESET; + ata_ehi_push_desc(ehi, "parity error"); + } + if (edma_err_cause & (EDMA_ERR_DEV_DCON | EDMA_ERR_DEV_CON)) { + ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, edma_err_cause & EDMA_ERR_DEV_DCON ? + "dev disconnect" : "dev connect"); + action |= ATA_EH_RESET; + } + + /* + * Gen-I has a different SELF_DIS bit, + * different FREEZE bits, and no SERR bit: + */ + if (IS_GEN_I(hpriv)) { + eh_freeze_mask = EDMA_EH_FREEZE_5; + if (edma_err_cause & EDMA_ERR_SELF_DIS_5) { + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + ata_ehi_push_desc(ehi, "EDMA self-disable"); + } + } else { + eh_freeze_mask = EDMA_EH_FREEZE; + if (edma_err_cause & EDMA_ERR_SELF_DIS) { + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + ata_ehi_push_desc(ehi, "EDMA self-disable"); + } + if (edma_err_cause & EDMA_ERR_SERR) { + ata_ehi_push_desc(ehi, "SError=%08x", serr); + err_mask |= AC_ERR_ATA_BUS; + action |= ATA_EH_RESET; + } + } + + if (!err_mask) { + err_mask = AC_ERR_OTHER; + action |= ATA_EH_RESET; + } + + ehi->serror |= serr; + ehi->action |= action; + + if (qc) + qc->err_mask |= err_mask; + else + ehi->err_mask |= err_mask; + + if (err_mask == AC_ERR_DEV) { + /* + * Cannot do ata_port_freeze() here, + * because it would kill PIO access, + * which is needed for further diagnosis. + */ + mv_eh_freeze(ap); + abort = 1; + } else if (edma_err_cause & eh_freeze_mask) { + /* + * Note to self: ata_port_freeze() calls ata_port_abort() + */ + ata_port_freeze(ap); + } else { + abort = 1; + } + + if (abort) { + if (qc) + ata_link_abort(qc->dev->link); + else + ata_port_abort(ap); + } +} + +static bool mv_process_crpb_response(struct ata_port *ap, + struct mv_crpb *response, unsigned int tag, int ncq_enabled) +{ + u8 ata_status; + u16 edma_status = le16_to_cpu(response->flags); + + /* + * edma_status from a response queue entry: + * LSB is from EDMA_ERR_IRQ_CAUSE (non-NCQ only). + * MSB is saved ATA status from command completion. + */ + if (!ncq_enabled) { + u8 err_cause = edma_status & 0xff & ~EDMA_ERR_DEV; + if (err_cause) { + /* + * Error will be seen/handled by + * mv_err_intr(). So do nothing at all here. + */ + return false; + } + } + ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT; + if (!ac_err_mask(ata_status)) + return true; + /* else: leave it for mv_err_intr() */ + return false; +} + +static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_host_priv *hpriv = ap->host->private_data; + u32 in_index; + bool work_done = false; + u32 done_mask = 0; + int ncq_enabled = (pp->pp_flags & MV_PP_FLAG_NCQ_EN); + + /* Get the hardware queue position index */ + in_index = (readl(port_mmio + EDMA_RSP_Q_IN_PTR) + >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; + + /* Process new responses from since the last time we looked */ + while (in_index != pp->resp_idx) { + unsigned int tag; + struct mv_crpb *response = &pp->crpb[pp->resp_idx]; + + pp->resp_idx = (pp->resp_idx + 1) & MV_MAX_Q_DEPTH_MASK; + + if (IS_GEN_I(hpriv)) { + /* 50xx: no NCQ, only one command active at a time */ + tag = ap->link.active_tag; + } else { + /* Gen II/IIE: get command tag from CRPB entry */ + tag = le16_to_cpu(response->id) & 0x1f; + } + if (mv_process_crpb_response(ap, response, tag, ncq_enabled)) + done_mask |= 1 << tag; + work_done = true; + } + + if (work_done) { + ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); + + /* Update the software queue position index in hardware */ + writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | + (pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT), + port_mmio + EDMA_RSP_Q_OUT_PTR); + } +} + +static void mv_port_intr(struct ata_port *ap, u32 port_cause) +{ + struct mv_port_priv *pp; + int edma_was_enabled; + + /* + * Grab a snapshot of the EDMA_EN flag setting, + * so that we have a consistent view for this port, + * even if something we call of our routines changes it. + */ + pp = ap->private_data; + edma_was_enabled = (pp->pp_flags & MV_PP_FLAG_EDMA_EN); + /* + * Process completed CRPB response(s) before other events. + */ + if (edma_was_enabled && (port_cause & DONE_IRQ)) { + mv_process_crpb_entries(ap, pp); + if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH) + mv_handle_fbs_ncq_dev_err(ap); + } + /* + * Handle chip-reported errors, or continue on to handle PIO. + */ + if (unlikely(port_cause & ERR_IRQ)) { + mv_err_intr(ap); + } else if (!edma_was_enabled) { + struct ata_queued_cmd *qc = mv_get_active_qc(ap); + if (qc) + ata_bmdma_port_intr(ap, qc); + else + mv_unexpected_intr(ap, edma_was_enabled); + } +} + +/** + * mv_host_intr - Handle all interrupts on the given host controller + * @host: host specific structure + * @main_irq_cause: Main interrupt cause register for the chip. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_host_intr(struct ata_host *host, u32 main_irq_cause) +{ + struct mv_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->base, *hc_mmio; + unsigned int handled = 0, port; + + /* If asserted, clear the "all ports" IRQ coalescing bit */ + if (main_irq_cause & ALL_PORTS_COAL_DONE) + writel(~ALL_PORTS_COAL_IRQ, mmio + IRQ_COAL_CAUSE); + + for (port = 0; port < hpriv->n_ports; port++) { + struct ata_port *ap = host->ports[port]; + unsigned int p, shift, hardport, port_cause; + + MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport); + /* + * Each hc within the host has its own hc_irq_cause register, + * where the interrupting ports bits get ack'd. + */ + if (hardport == 0) { /* first port on this hc ? */ + u32 hc_cause = (main_irq_cause >> shift) & HC0_IRQ_PEND; + u32 port_mask, ack_irqs; + /* + * Skip this entire hc if nothing pending for any ports + */ + if (!hc_cause) { + port += MV_PORTS_PER_HC - 1; + continue; + } + /* + * We don't need/want to read the hc_irq_cause register, + * because doing so hurts performance, and + * main_irq_cause already gives us everything we need. + * + * But we do have to *write* to the hc_irq_cause to ack + * the ports that we are handling this time through. + * + * This requires that we create a bitmap for those + * ports which interrupted us, and use that bitmap + * to ack (only) those ports via hc_irq_cause. + */ + ack_irqs = 0; + if (hc_cause & PORTS_0_3_COAL_DONE) + ack_irqs = HC_COAL_IRQ; + for (p = 0; p < MV_PORTS_PER_HC; ++p) { + if ((port + p) >= hpriv->n_ports) + break; + port_mask = (DONE_IRQ | ERR_IRQ) << (p * 2); + if (hc_cause & port_mask) + ack_irqs |= (DMA_IRQ | DEV_IRQ) << p; + } + hc_mmio = mv_hc_base_from_port(mmio, port); + writelfl(~ack_irqs, hc_mmio + HC_IRQ_CAUSE); + handled = 1; + } + /* + * Handle interrupts signalled for this port: + */ + port_cause = (main_irq_cause >> shift) & (DONE_IRQ | ERR_IRQ); + if (port_cause) + mv_port_intr(ap, port_cause); + } + return handled; +} + +static int mv_pci_error(struct ata_host *host, void __iomem *mmio) +{ + struct mv_host_priv *hpriv = host->private_data; + struct ata_port *ap; + struct ata_queued_cmd *qc; + struct ata_eh_info *ehi; + unsigned int i, err_mask, printed = 0; + u32 err_cause; + + err_cause = readl(mmio + hpriv->irq_cause_offset); + + dev_err(host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n", err_cause); + + DPRINTK("All regs @ PCI error\n"); + mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev)); + + writelfl(0, mmio + hpriv->irq_cause_offset); + + for (i = 0; i < host->n_ports; i++) { + ap = host->ports[i]; + if (!ata_link_offline(&ap->link)) { + ehi = &ap->link.eh_info; + ata_ehi_clear_desc(ehi); + if (!printed++) + ata_ehi_push_desc(ehi, + "PCI err cause 0x%08x", err_cause); + err_mask = AC_ERR_HOST_BUS; + ehi->action = ATA_EH_RESET; + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc) + qc->err_mask |= err_mask; + else + ehi->err_mask |= err_mask; + + ata_port_freeze(ap); + } + } + return 1; /* handled */ +} + +/** + * mv_interrupt - Main interrupt event handler + * @irq: unused + * @dev_instance: private data; in this case the host structure + * + * Read the read only register to determine if any host + * controllers have pending interrupts. If so, call lower level + * routine to handle. Also check for PCI errors which are only + * reported here. + * + * LOCKING: + * This routine holds the host lock while processing pending + * interrupts. + */ +static irqreturn_t mv_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + struct mv_host_priv *hpriv = host->private_data; + unsigned int handled = 0; + int using_msi = hpriv->hp_flags & MV_HP_FLAG_MSI; + u32 main_irq_cause, pending_irqs; + + spin_lock(&host->lock); + + /* for MSI: block new interrupts while in here */ + if (using_msi) + mv_write_main_irq_mask(0, hpriv); + + main_irq_cause = readl(hpriv->main_irq_cause_addr); + pending_irqs = main_irq_cause & hpriv->main_irq_mask; + /* + * Deal with cases where we either have nothing pending, or have read + * a bogus register value which can indicate HW removal or PCI fault. + */ + if (pending_irqs && main_irq_cause != 0xffffffffU) { + if (unlikely((pending_irqs & PCI_ERR) && !IS_SOC(hpriv))) + handled = mv_pci_error(host, hpriv->base); + else + handled = mv_host_intr(host, pending_irqs); + } + + /* for MSI: unmask; interrupt cause bits will retrigger now */ + if (using_msi) + mv_write_main_irq_mask(hpriv->main_irq_mask, hpriv); + + spin_unlock(&host->lock); + + return IRQ_RETVAL(handled); +} + +static unsigned int mv5_scr_offset(unsigned int sc_reg_in) +{ + unsigned int ofs; + + switch (sc_reg_in) { + case SCR_STATUS: + case SCR_ERROR: + case SCR_CONTROL: + ofs = sc_reg_in * sizeof(u32); + break; + default: + ofs = 0xffffffffU; + break; + } + return ofs; +} + +static int mv5_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val) +{ + struct mv_host_priv *hpriv = link->ap->host->private_data; + void __iomem *mmio = hpriv->base; + void __iomem *addr = mv5_phy_base(mmio, link->ap->port_no); + unsigned int ofs = mv5_scr_offset(sc_reg_in); + + if (ofs != 0xffffffffU) { + *val = readl(addr + ofs); + return 0; + } else + return -EINVAL; +} + +static int mv5_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val) +{ + struct mv_host_priv *hpriv = link->ap->host->private_data; + void __iomem *mmio = hpriv->base; + void __iomem *addr = mv5_phy_base(mmio, link->ap->port_no); + unsigned int ofs = mv5_scr_offset(sc_reg_in); + + if (ofs != 0xffffffffU) { + writelfl(val, addr + ofs); + return 0; + } else + return -EINVAL; +} + +static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + int early_5080; + + early_5080 = (pdev->device == 0x5080) && (pdev->revision == 0); + + if (!early_5080) { + u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL); + tmp |= (1 << 0); + writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL); + } + + mv_reset_pci_bus(host, mmio); +} + +static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + writel(0x0fcfffff, mmio + FLASH_CTL); +} + +static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio) +{ + void __iomem *phy_mmio = mv5_phy_base(mmio, idx); + u32 tmp; + + tmp = readl(phy_mmio + MV5_PHY_MODE); + + hpriv->signal[idx].pre = tmp & 0x1800; /* bits 12:11 */ + hpriv->signal[idx].amps = tmp & 0xe0; /* bits 7:5 */ +} + +static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + u32 tmp; + + writel(0, mmio + GPIO_PORT_CTL); + + /* FIXME: handle MV_HP_ERRATA_50XXB2 errata */ + + tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL); + tmp |= ~(1 << 0); + writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL); +} + +static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port) +{ + void __iomem *phy_mmio = mv5_phy_base(mmio, port); + const u32 mask = (1<<12) | (1<<11) | (1<<7) | (1<<6) | (1<<5); + u32 tmp; + int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0); + + if (fix_apm_sq) { + tmp = readl(phy_mmio + MV5_LTMODE); + tmp |= (1 << 19); + writel(tmp, phy_mmio + MV5_LTMODE); + + tmp = readl(phy_mmio + MV5_PHY_CTL); + tmp &= ~0x3; + tmp |= 0x1; + writel(tmp, phy_mmio + MV5_PHY_CTL); + } + + tmp = readl(phy_mmio + MV5_PHY_MODE); + tmp &= ~mask; + tmp |= hpriv->signal[port].pre; + tmp |= hpriv->signal[port].amps; + writel(tmp, phy_mmio + MV5_PHY_MODE); +} + + +#undef ZERO +#define ZERO(reg) writel(0, port_mmio + (reg)) +static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port) +{ + void __iomem *port_mmio = mv_port_base(mmio, port); + + mv_reset_channel(hpriv, mmio, port); + + ZERO(0x028); /* command */ + writel(0x11f, port_mmio + EDMA_CFG); + ZERO(0x004); /* timer */ + ZERO(0x008); /* irq err cause */ + ZERO(0x00c); /* irq err mask */ + ZERO(0x010); /* rq bah */ + ZERO(0x014); /* rq inp */ + ZERO(0x018); /* rq outp */ + ZERO(0x01c); /* respq bah */ + ZERO(0x024); /* respq outp */ + ZERO(0x020); /* respq inp */ + ZERO(0x02c); /* test control */ + writel(0xbc, port_mmio + EDMA_IORDY_TMOUT); +} +#undef ZERO + +#define ZERO(reg) writel(0, hc_mmio + (reg)) +static void mv5_reset_one_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int hc) +{ + void __iomem *hc_mmio = mv_hc_base(mmio, hc); + u32 tmp; + + ZERO(0x00c); + ZERO(0x010); + ZERO(0x014); + ZERO(0x018); + + tmp = readl(hc_mmio + 0x20); + tmp &= 0x1c1c1c1c; + tmp |= 0x03030303; + writel(tmp, hc_mmio + 0x20); +} +#undef ZERO + +static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc) +{ + unsigned int hc, port; + + for (hc = 0; hc < n_hc; hc++) { + for (port = 0; port < MV_PORTS_PER_HC; port++) + mv5_reset_hc_port(hpriv, mmio, + (hc * MV_PORTS_PER_HC) + port); + + mv5_reset_one_hc(hpriv, mmio, hc); + } + + return 0; +} + +#undef ZERO +#define ZERO(reg) writel(0, mmio + (reg)) +static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio) +{ + struct mv_host_priv *hpriv = host->private_data; + u32 tmp; + + tmp = readl(mmio + MV_PCI_MODE); + tmp &= 0xff00ffff; + writel(tmp, mmio + MV_PCI_MODE); + + ZERO(MV_PCI_DISC_TIMER); + ZERO(MV_PCI_MSI_TRIGGER); + writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT); + ZERO(MV_PCI_SERR_MASK); + ZERO(hpriv->irq_cause_offset); + ZERO(hpriv->irq_mask_offset); + ZERO(MV_PCI_ERR_LOW_ADDRESS); + ZERO(MV_PCI_ERR_HIGH_ADDRESS); + ZERO(MV_PCI_ERR_ATTRIBUTE); + ZERO(MV_PCI_ERR_COMMAND); +} +#undef ZERO + +static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + u32 tmp; + + mv5_reset_flash(hpriv, mmio); + + tmp = readl(mmio + GPIO_PORT_CTL); + tmp &= 0x3; + tmp |= (1 << 5) | (1 << 6); + writel(tmp, mmio + GPIO_PORT_CTL); +} + +/** + * mv6_reset_hc - Perform the 6xxx global soft reset + * @mmio: base address of the HBA + * + * This routine only applies to 6xxx parts. + * + * LOCKING: + * Inherited from caller. + */ +static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc) +{ + void __iomem *reg = mmio + PCI_MAIN_CMD_STS; + int i, rc = 0; + u32 t; + + /* Following procedure defined in PCI "main command and status + * register" table. + */ + t = readl(reg); + writel(t | STOP_PCI_MASTER, reg); + + for (i = 0; i < 1000; i++) { + udelay(1); + t = readl(reg); + if (PCI_MASTER_EMPTY & t) + break; + } + if (!(PCI_MASTER_EMPTY & t)) { + printk(KERN_ERR DRV_NAME ": PCI master won't flush\n"); + rc = 1; + goto done; + } + + /* set reset */ + i = 5; + do { + writel(t | GLOB_SFT_RST, reg); + t = readl(reg); + udelay(1); + } while (!(GLOB_SFT_RST & t) && (i-- > 0)); + + if (!(GLOB_SFT_RST & t)) { + printk(KERN_ERR DRV_NAME ": can't set global reset\n"); + rc = 1; + goto done; + } + + /* clear reset and *reenable the PCI master* (not mentioned in spec) */ + i = 5; + do { + writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg); + t = readl(reg); + udelay(1); + } while ((GLOB_SFT_RST & t) && (i-- > 0)); + + if (GLOB_SFT_RST & t) { + printk(KERN_ERR DRV_NAME ": can't clear global reset\n"); + rc = 1; + } +done: + return rc; +} + +static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio) +{ + void __iomem *port_mmio; + u32 tmp; + + tmp = readl(mmio + RESET_CFG); + if ((tmp & (1 << 0)) == 0) { + hpriv->signal[idx].amps = 0x7 << 8; + hpriv->signal[idx].pre = 0x1 << 5; + return; + } + + port_mmio = mv_port_base(mmio, idx); + tmp = readl(port_mmio + PHY_MODE2); + + hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */ + hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ +} + +static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + writel(0x00000060, mmio + GPIO_PORT_CTL); +} + +static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port) +{ + void __iomem *port_mmio = mv_port_base(mmio, port); + + u32 hp_flags = hpriv->hp_flags; + int fix_phy_mode2 = + hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); + int fix_phy_mode4 = + hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); + u32 m2, m3; + + if (fix_phy_mode2) { + m2 = readl(port_mmio + PHY_MODE2); + m2 &= ~(1 << 16); + m2 |= (1 << 31); + writel(m2, port_mmio + PHY_MODE2); + + udelay(200); + + m2 = readl(port_mmio + PHY_MODE2); + m2 &= ~((1 << 16) | (1 << 31)); + writel(m2, port_mmio + PHY_MODE2); + + udelay(200); + } + + /* + * Gen-II/IIe PHY_MODE3 errata RM#2: + * Achieves better receiver noise performance than the h/w default: + */ + m3 = readl(port_mmio + PHY_MODE3); + m3 = (m3 & 0x1f) | (0x5555601 << 5); + + /* Guideline 88F5182 (GL# SATA-S11) */ + if (IS_SOC(hpriv)) + m3 &= ~0x1c; + + if (fix_phy_mode4) { + u32 m4 = readl(port_mmio + PHY_MODE4); + /* + * Enforce reserved-bit restrictions on GenIIe devices only. + * For earlier chipsets, force only the internal config field + * (workaround for errata FEr SATA#10 part 1). + */ + if (IS_GEN_IIE(hpriv)) + m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES; + else + m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE; + writel(m4, port_mmio + PHY_MODE4); + } + /* + * Workaround for 60x1-B2 errata SATA#13: + * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3, + * so we must always rewrite PHY_MODE3 after PHY_MODE4. + * Or ensure we use writelfl() when writing PHY_MODE4. + */ + writel(m3, port_mmio + PHY_MODE3); + + /* Revert values of pre-emphasis and signal amps to the saved ones */ + m2 = readl(port_mmio + PHY_MODE2); + + m2 &= ~MV_M2_PREAMP_MASK; + m2 |= hpriv->signal[port].amps; + m2 |= hpriv->signal[port].pre; + m2 &= ~(1 << 16); + + /* according to mvSata 3.6.1, some IIE values are fixed */ + if (IS_GEN_IIE(hpriv)) { + m2 &= ~0xC30FF01F; + m2 |= 0x0000900F; + } + + writel(m2, port_mmio + PHY_MODE2); +} + +/* TODO: use the generic LED interface to configure the SATA Presence */ +/* & Acitivy LEDs on the board */ +static void mv_soc_enable_leds(struct mv_host_priv *hpriv, + void __iomem *mmio) +{ + return; +} + +static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio) +{ + void __iomem *port_mmio; + u32 tmp; + + port_mmio = mv_port_base(mmio, idx); + tmp = readl(port_mmio + PHY_MODE2); + + hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */ + hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ +} + +#undef ZERO +#define ZERO(reg) writel(0, port_mmio + (reg)) +static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv, + void __iomem *mmio, unsigned int port) +{ + void __iomem *port_mmio = mv_port_base(mmio, port); + + mv_reset_channel(hpriv, mmio, port); + + ZERO(0x028); /* command */ + writel(0x101f, port_mmio + EDMA_CFG); + ZERO(0x004); /* timer */ + ZERO(0x008); /* irq err cause */ + ZERO(0x00c); /* irq err mask */ + ZERO(0x010); /* rq bah */ + ZERO(0x014); /* rq inp */ + ZERO(0x018); /* rq outp */ + ZERO(0x01c); /* respq bah */ + ZERO(0x024); /* respq outp */ + ZERO(0x020); /* respq inp */ + ZERO(0x02c); /* test control */ + writel(0x800, port_mmio + EDMA_IORDY_TMOUT); +} + +#undef ZERO + +#define ZERO(reg) writel(0, hc_mmio + (reg)) +static void mv_soc_reset_one_hc(struct mv_host_priv *hpriv, + void __iomem *mmio) +{ + void __iomem *hc_mmio = mv_hc_base(mmio, 0); + + ZERO(0x00c); + ZERO(0x010); + ZERO(0x014); + +} + +#undef ZERO + +static int mv_soc_reset_hc(struct mv_host_priv *hpriv, + void __iomem *mmio, unsigned int n_hc) +{ + unsigned int port; + + for (port = 0; port < hpriv->n_ports; port++) + mv_soc_reset_hc_port(hpriv, mmio, port); + + mv_soc_reset_one_hc(hpriv, mmio); + + return 0; +} + +static void mv_soc_reset_flash(struct mv_host_priv *hpriv, + void __iomem *mmio) +{ + return; +} + +static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio) +{ + return; +} + +static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv, + void __iomem *mmio, unsigned int port) +{ + void __iomem *port_mmio = mv_port_base(mmio, port); + u32 reg; + + reg = readl(port_mmio + PHY_MODE3); + reg &= ~(0x3 << 27); /* SELMUPF (bits 28:27) to 1 */ + reg |= (0x1 << 27); + reg &= ~(0x3 << 29); /* SELMUPI (bits 30:29) to 1 */ + reg |= (0x1 << 29); + writel(reg, port_mmio + PHY_MODE3); + + reg = readl(port_mmio + PHY_MODE4); + reg &= ~0x1; /* SATU_OD8 (bit 0) to 0, reserved bit 16 must be set */ + reg |= (0x1 << 16); + writel(reg, port_mmio + PHY_MODE4); + + reg = readl(port_mmio + PHY_MODE9_GEN2); + reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */ + reg |= 0x8; + reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */ + writel(reg, port_mmio + PHY_MODE9_GEN2); + + reg = readl(port_mmio + PHY_MODE9_GEN1); + reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */ + reg |= 0x8; + reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */ + writel(reg, port_mmio + PHY_MODE9_GEN1); +} + +/** + * soc_is_65 - check if the soc is 65 nano device + * + * Detect the type of the SoC, this is done by reading the PHYCFG_OFS + * register, this register should contain non-zero value and it exists only + * in the 65 nano devices, when reading it from older devices we get 0. + */ +static bool soc_is_65n(struct mv_host_priv *hpriv) +{ + void __iomem *port0_mmio = mv_port_base(hpriv->base, 0); + + if (readl(port0_mmio + PHYCFG_OFS)) + return true; + return false; +} + +static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i) +{ + u32 ifcfg = readl(port_mmio + SATA_IFCFG); + + ifcfg = (ifcfg & 0xf7f) | 0x9b1000; /* from chip spec */ + if (want_gen2i) + ifcfg |= (1 << 7); /* enable gen2i speed */ + writelfl(ifcfg, port_mmio + SATA_IFCFG); +} + +static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port_no) +{ + void __iomem *port_mmio = mv_port_base(mmio, port_no); + + /* + * The datasheet warns against setting EDMA_RESET when EDMA is active + * (but doesn't say what the problem might be). So we first try + * to disable the EDMA engine before doing the EDMA_RESET operation. + */ + mv_stop_edma_engine(port_mmio); + writelfl(EDMA_RESET, port_mmio + EDMA_CMD); + + if (!IS_GEN_I(hpriv)) { + /* Enable 3.0gb/s link speed: this survives EDMA_RESET */ + mv_setup_ifcfg(port_mmio, 1); + } + /* + * Strobing EDMA_RESET here causes a hard reset of the SATA transport, + * link, and physical layers. It resets all SATA interface registers + * (except for SATA_IFCFG), and issues a COMRESET to the dev. + */ + writelfl(EDMA_RESET, port_mmio + EDMA_CMD); + udelay(25); /* allow reset propagation */ + writelfl(0, port_mmio + EDMA_CMD); + + hpriv->ops->phy_errata(hpriv, mmio, port_no); + + if (IS_GEN_I(hpriv)) + mdelay(1); +} + +static void mv_pmp_select(struct ata_port *ap, int pmp) +{ + if (sata_pmp_supported(ap)) { + void __iomem *port_mmio = mv_ap_base(ap); + u32 reg = readl(port_mmio + SATA_IFCTL); + int old = reg & 0xf; + + if (old != pmp) { + reg = (reg & ~0xf) | pmp; + writelfl(reg, port_mmio + SATA_IFCTL); + } + } +} + +static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + mv_pmp_select(link->ap, sata_srst_pmp(link)); + return sata_std_hardreset(link, class, deadline); +} + +static int mv_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + mv_pmp_select(link->ap, sata_srst_pmp(link)); + return ata_sff_softreset(link, class, deadline); +} + +static int mv_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct mv_host_priv *hpriv = ap->host->private_data; + struct mv_port_priv *pp = ap->private_data; + void __iomem *mmio = hpriv->base; + int rc, attempts = 0, extra = 0; + u32 sstatus; + bool online; + + mv_reset_channel(hpriv, mmio, ap->port_no); + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + pp->pp_flags &= + ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY); + + /* Workaround for errata FEr SATA#10 (part 2) */ + do { + const unsigned long *timing = + sata_ehc_deb_timing(&link->eh_context); + + rc = sata_link_hardreset(link, timing, deadline + extra, + &online, NULL); + rc = online ? -EAGAIN : rc; + if (rc) + return rc; + sata_scr_read(link, SCR_STATUS, &sstatus); + if (!IS_GEN_I(hpriv) && ++attempts >= 5 && sstatus == 0x121) { + /* Force 1.5gb/s link speed and try again */ + mv_setup_ifcfg(mv_ap_base(ap), 0); + if (time_after(jiffies + HZ, deadline)) + extra = HZ; /* only extend it once, max */ + } + } while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123); + mv_save_cached_regs(ap); + mv_edma_cfg(ap, 0, 0); + + return rc; +} + +static void mv_eh_freeze(struct ata_port *ap) +{ + mv_stop_edma(ap); + mv_enable_port_irqs(ap, 0); +} + +static void mv_eh_thaw(struct ata_port *ap) +{ + struct mv_host_priv *hpriv = ap->host->private_data; + unsigned int port = ap->port_no; + unsigned int hardport = mv_hardport_from_port(port); + void __iomem *hc_mmio = mv_hc_base_from_port(hpriv->base, port); + void __iomem *port_mmio = mv_ap_base(ap); + u32 hc_irq_cause; + + /* clear EDMA errors on this port */ + writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE); + + /* clear pending irq events */ + hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); + writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE); + + mv_enable_port_irqs(ap, ERR_IRQ); +} + +/** + * mv_port_init - Perform some early initialization on a single port. + * @port: libata data structure storing shadow register addresses + * @port_mmio: base address of the port + * + * Initialize shadow register mmio addresses, clear outstanding + * interrupts on the port, and unmask interrupts for the future + * start of the port. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) +{ + void __iomem *serr, *shd_base = port_mmio + SHD_BLK; + + /* PIO related setup + */ + port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA); + port->error_addr = + port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR); + port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT); + port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL); + port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM); + port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH); + port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE); + port->status_addr = + port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS); + /* special case: control/altstatus doesn't have ATA_REG_ address */ + port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST; + + /* Clear any currently outstanding port interrupt conditions */ + serr = port_mmio + mv_scr_offset(SCR_ERROR); + writelfl(readl(serr), serr); + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE); + + /* unmask all non-transient EDMA error interrupts */ + writelfl(~EDMA_ERR_IRQ_TRANSIENT, port_mmio + EDMA_ERR_IRQ_MASK); + + VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n", + readl(port_mmio + EDMA_CFG), + readl(port_mmio + EDMA_ERR_IRQ_CAUSE), + readl(port_mmio + EDMA_ERR_IRQ_MASK)); +} + +static unsigned int mv_in_pcix_mode(struct ata_host *host) +{ + struct mv_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->base; + u32 reg; + + if (IS_SOC(hpriv) || !IS_PCIE(hpriv)) + return 0; /* not PCI-X capable */ + reg = readl(mmio + MV_PCI_MODE); + if ((reg & MV_PCI_MODE_MASK) == 0) + return 0; /* conventional PCI mode */ + return 1; /* chip is in PCI-X mode */ +} + +static int mv_pci_cut_through_okay(struct ata_host *host) +{ + struct mv_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->base; + u32 reg; + + if (!mv_in_pcix_mode(host)) { + reg = readl(mmio + MV_PCI_COMMAND); + if (reg & MV_PCI_COMMAND_MRDTRIG) + return 0; /* not okay */ + } + return 1; /* okay */ +} + +static void mv_60x1b2_errata_pci7(struct ata_host *host) +{ + struct mv_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->base; + + /* workaround for 60x1-B2 errata PCI#7 */ + if (mv_in_pcix_mode(host)) { + u32 reg = readl(mmio + MV_PCI_COMMAND); + writelfl(reg & ~MV_PCI_COMMAND_MWRCOM, mmio + MV_PCI_COMMAND); + } +} + +static int mv_chip_id(struct ata_host *host, unsigned int board_idx) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + struct mv_host_priv *hpriv = host->private_data; + u32 hp_flags = hpriv->hp_flags; + + switch (board_idx) { + case chip_5080: + hpriv->ops = &mv5xxx_ops; + hp_flags |= MV_HP_GEN_I; + + switch (pdev->revision) { + case 0x1: + hp_flags |= MV_HP_ERRATA_50XXB0; + break; + case 0x3: + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + default: + dev_warn(&pdev->dev, + "Applying 50XXB2 workarounds to unknown rev\n"); + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + } + break; + + case chip_504x: + case chip_508x: + hpriv->ops = &mv5xxx_ops; + hp_flags |= MV_HP_GEN_I; + + switch (pdev->revision) { + case 0x0: + hp_flags |= MV_HP_ERRATA_50XXB0; + break; + case 0x3: + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + default: + dev_warn(&pdev->dev, + "Applying B2 workarounds to unknown rev\n"); + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + } + break; + + case chip_604x: + case chip_608x: + hpriv->ops = &mv6xxx_ops; + hp_flags |= MV_HP_GEN_II; + + switch (pdev->revision) { + case 0x7: + mv_60x1b2_errata_pci7(host); + hp_flags |= MV_HP_ERRATA_60X1B2; + break; + case 0x9: + hp_flags |= MV_HP_ERRATA_60X1C0; + break; + default: + dev_warn(&pdev->dev, + "Applying B2 workarounds to unknown rev\n"); + hp_flags |= MV_HP_ERRATA_60X1B2; + break; + } + break; + + case chip_7042: + hp_flags |= MV_HP_PCIE | MV_HP_CUT_THROUGH; + if (pdev->vendor == PCI_VENDOR_ID_TTI && + (pdev->device == 0x2300 || pdev->device == 0x2310)) + { + /* + * Highpoint RocketRAID PCIe 23xx series cards: + * + * Unconfigured drives are treated as "Legacy" + * by the BIOS, and it overwrites sector 8 with + * a "Lgcy" metadata block prior to Linux boot. + * + * Configured drives (RAID or JBOD) leave sector 8 + * alone, but instead overwrite a high numbered + * sector for the RAID metadata. This sector can + * be determined exactly, by truncating the physical + * drive capacity to a nice even GB value. + * + * RAID metadata is at: (dev->n_sectors & ~0xfffff) + * + * Warn the user, lest they think we're just buggy. + */ + printk(KERN_WARNING DRV_NAME ": Highpoint RocketRAID" + " BIOS CORRUPTS DATA on all attached drives," + " regardless of if/how they are configured." + " BEWARE!\n"); + printk(KERN_WARNING DRV_NAME ": For data safety, do not" + " use sectors 8-9 on \"Legacy\" drives," + " and avoid the final two gigabytes on" + " all RocketRAID BIOS initialized drives.\n"); + } + /* drop through */ + case chip_6042: + hpriv->ops = &mv6xxx_ops; + hp_flags |= MV_HP_GEN_IIE; + if (board_idx == chip_6042 && mv_pci_cut_through_okay(host)) + hp_flags |= MV_HP_CUT_THROUGH; + + switch (pdev->revision) { + case 0x2: /* Rev.B0: the first/only public release */ + hp_flags |= MV_HP_ERRATA_60X1C0; + break; + default: + dev_warn(&pdev->dev, + "Applying 60X1C0 workarounds to unknown rev\n"); + hp_flags |= MV_HP_ERRATA_60X1C0; + break; + } + break; + case chip_soc: + if (soc_is_65n(hpriv)) + hpriv->ops = &mv_soc_65n_ops; + else + hpriv->ops = &mv_soc_ops; + hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE | + MV_HP_ERRATA_60X1C0; + break; + + default: + dev_err(host->dev, "BUG: invalid board index %u\n", board_idx); + return 1; + } + + hpriv->hp_flags = hp_flags; + if (hp_flags & MV_HP_PCIE) { + hpriv->irq_cause_offset = PCIE_IRQ_CAUSE; + hpriv->irq_mask_offset = PCIE_IRQ_MASK; + hpriv->unmask_all_irqs = PCIE_UNMASK_ALL_IRQS; + } else { + hpriv->irq_cause_offset = PCI_IRQ_CAUSE; + hpriv->irq_mask_offset = PCI_IRQ_MASK; + hpriv->unmask_all_irqs = PCI_UNMASK_ALL_IRQS; + } + + return 0; +} + +/** + * mv_init_host - Perform some early initialization of the host. + * @host: ATA host to initialize + * + * If possible, do an early global reset of the host. Then do + * our port init and clear/unmask all/relevant host interrupts. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_init_host(struct ata_host *host) +{ + int rc = 0, n_hc, port, hc; + struct mv_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->base; + + rc = mv_chip_id(host, hpriv->board_idx); + if (rc) + goto done; + + if (IS_SOC(hpriv)) { + hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE; + hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK; + } else { + hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE; + hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK; + } + + /* initialize shadow irq mask with register's value */ + hpriv->main_irq_mask = readl(hpriv->main_irq_mask_addr); + + /* global interrupt mask: 0 == mask everything */ + mv_set_main_irq_mask(host, ~0, 0); + + n_hc = mv_get_hc_count(host->ports[0]->flags); + + for (port = 0; port < host->n_ports; port++) + if (hpriv->ops->read_preamp) + hpriv->ops->read_preamp(hpriv, port, mmio); + + rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc); + if (rc) + goto done; + + hpriv->ops->reset_flash(hpriv, mmio); + hpriv->ops->reset_bus(host, mmio); + hpriv->ops->enable_leds(hpriv, mmio); + + for (port = 0; port < host->n_ports; port++) { + struct ata_port *ap = host->ports[port]; + void __iomem *port_mmio = mv_port_base(mmio, port); + + mv_port_init(&ap->ioaddr, port_mmio); + } + + for (hc = 0; hc < n_hc; hc++) { + void __iomem *hc_mmio = mv_hc_base(mmio, hc); + + VPRINTK("HC%i: HC config=0x%08x HC IRQ cause " + "(before clear)=0x%08x\n", hc, + readl(hc_mmio + HC_CFG), + readl(hc_mmio + HC_IRQ_CAUSE)); + + /* Clear any currently outstanding hc interrupt conditions */ + writelfl(0, hc_mmio + HC_IRQ_CAUSE); + } + + if (!IS_SOC(hpriv)) { + /* Clear any currently outstanding host interrupt conditions */ + writelfl(0, mmio + hpriv->irq_cause_offset); + + /* and unmask interrupt generation for host regs */ + writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_offset); + } + + /* + * enable only global host interrupts for now. + * The per-port interrupts get done later as ports are set up. + */ + mv_set_main_irq_mask(host, 0, PCI_ERR); + mv_set_irq_coalescing(host, irq_coalescing_io_count, + irq_coalescing_usecs); +done: + return rc; +} + +static int mv_create_dma_pools(struct mv_host_priv *hpriv, struct device *dev) +{ + hpriv->crqb_pool = dmam_pool_create("crqb_q", dev, MV_CRQB_Q_SZ, + MV_CRQB_Q_SZ, 0); + if (!hpriv->crqb_pool) + return -ENOMEM; + + hpriv->crpb_pool = dmam_pool_create("crpb_q", dev, MV_CRPB_Q_SZ, + MV_CRPB_Q_SZ, 0); + if (!hpriv->crpb_pool) + return -ENOMEM; + + hpriv->sg_tbl_pool = dmam_pool_create("sg_tbl", dev, MV_SG_TBL_SZ, + MV_SG_TBL_SZ, 0); + if (!hpriv->sg_tbl_pool) + return -ENOMEM; + + return 0; +} + +static void mv_conf_mbus_windows(struct mv_host_priv *hpriv, + const struct mbus_dram_target_info *dram) +{ + int i; + + for (i = 0; i < 4; i++) { + writel(0, hpriv->base + WINDOW_CTRL(i)); + writel(0, hpriv->base + WINDOW_BASE(i)); + } + + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + + writel(((cs->size - 1) & 0xffff0000) | + (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + hpriv->base + WINDOW_CTRL(i)); + writel(cs->base, hpriv->base + WINDOW_BASE(i)); + } +} + +/** + * mv_platform_probe - handle a positive probe of an soc Marvell + * host + * @pdev: platform device found + * + * LOCKING: + * Inherited from caller. + */ +static int mv_platform_probe(struct platform_device *pdev) +{ + const struct mv_sata_platform_data *mv_platform_data; + const struct mbus_dram_target_info *dram; + const struct ata_port_info *ppi[] = + { &mv_port_info[chip_soc], NULL }; + struct ata_host *host; + struct mv_host_priv *hpriv; + struct resource *res; + int n_ports = 0, irq = 0; + int rc; + int port; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* + * Simple resource validation .. + */ + if (unlikely(pdev->num_resources != 2)) { + dev_err(&pdev->dev, "invalid number of resources\n"); + return -EINVAL; + } + + /* + * Get the register base first + */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) + return -EINVAL; + + /* allocate host */ + if (pdev->dev.of_node) { + of_property_read_u32(pdev->dev.of_node, "nr-ports", &n_ports); + irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + } else { + mv_platform_data = dev_get_platdata(&pdev->dev); + n_ports = mv_platform_data->n_ports; + irq = platform_get_irq(pdev, 0); + } + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); + + if (!host || !hpriv) + return -ENOMEM; + hpriv->port_clks = devm_kzalloc(&pdev->dev, + sizeof(struct clk *) * n_ports, + GFP_KERNEL); + if (!hpriv->port_clks) + return -ENOMEM; + hpriv->port_phys = devm_kzalloc(&pdev->dev, + sizeof(struct phy *) * n_ports, + GFP_KERNEL); + if (!hpriv->port_phys) + return -ENOMEM; + host->private_data = hpriv; + hpriv->board_idx = chip_soc; + + host->iomap = NULL; + hpriv->base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + hpriv->base -= SATAHC0_REG_BASE; + + hpriv->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(hpriv->clk)) + dev_notice(&pdev->dev, "cannot get optional clkdev\n"); + else + clk_prepare_enable(hpriv->clk); + + for (port = 0; port < n_ports; port++) { + char port_number[16]; + sprintf(port_number, "%d", port); + hpriv->port_clks[port] = clk_get(&pdev->dev, port_number); + if (!IS_ERR(hpriv->port_clks[port])) + clk_prepare_enable(hpriv->port_clks[port]); + + sprintf(port_number, "port%d", port); + hpriv->port_phys[port] = devm_phy_optional_get(&pdev->dev, + port_number); + if (IS_ERR(hpriv->port_phys[port])) { + rc = PTR_ERR(hpriv->port_phys[port]); + hpriv->port_phys[port] = NULL; + if (rc != -EPROBE_DEFER) + dev_warn(&pdev->dev, "error getting phy %d", rc); + + /* Cleanup only the initialized ports */ + hpriv->n_ports = port; + goto err; + } else + phy_power_on(hpriv->port_phys[port]); + } + + /* All the ports have been initialized */ + hpriv->n_ports = n_ports; + + /* + * (Re-)program MBUS remapping windows if we are asked to. + */ + dram = mv_mbus_dram_info(); + if (dram) + mv_conf_mbus_windows(hpriv, dram); + + rc = mv_create_dma_pools(hpriv, &pdev->dev); + if (rc) + goto err; + + /* + * To allow disk hotplug on Armada 370/XP SoCs, the PHY speed must be + * updated in the LP_PHY_CTL register. + */ + if (pdev->dev.of_node && + of_device_is_compatible(pdev->dev.of_node, + "marvell,armada-370-sata")) + hpriv->hp_flags |= MV_HP_FIX_LP_PHY_CTL; + + /* initialize adapter */ + rc = mv_init_host(host); + if (rc) + goto err; + + dev_info(&pdev->dev, "slots %u ports %d\n", + (unsigned)MV_MAX_Q_DEPTH, host->n_ports); + + rc = ata_host_activate(host, irq, mv_interrupt, IRQF_SHARED, &mv6_sht); + if (!rc) + return 0; + +err: + if (!IS_ERR(hpriv->clk)) { + clk_disable_unprepare(hpriv->clk); + clk_put(hpriv->clk); + } + for (port = 0; port < hpriv->n_ports; port++) { + if (!IS_ERR(hpriv->port_clks[port])) { + clk_disable_unprepare(hpriv->port_clks[port]); + clk_put(hpriv->port_clks[port]); + } + phy_power_off(hpriv->port_phys[port]); + } + + return rc; +} + +/* + * + * mv_platform_remove - unplug a platform interface + * @pdev: platform device + * + * A platform bus SATA device has been unplugged. Perform the needed + * cleanup. Also called on module unload for any active devices. + */ +static int mv_platform_remove(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + struct mv_host_priv *hpriv = host->private_data; + int port; + ata_host_detach(host); + + if (!IS_ERR(hpriv->clk)) { + clk_disable_unprepare(hpriv->clk); + clk_put(hpriv->clk); + } + for (port = 0; port < host->n_ports; port++) { + if (!IS_ERR(hpriv->port_clks[port])) { + clk_disable_unprepare(hpriv->port_clks[port]); + clk_put(hpriv->port_clks[port]); + } + phy_power_off(hpriv->port_phys[port]); + } + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int mv_platform_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct ata_host *host = platform_get_drvdata(pdev); + if (host) + return ata_host_suspend(host, state); + else + return 0; +} + +static int mv_platform_resume(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + const struct mbus_dram_target_info *dram; + int ret; + + if (host) { + struct mv_host_priv *hpriv = host->private_data; + + /* + * (Re-)program MBUS remapping windows if we are asked to. + */ + dram = mv_mbus_dram_info(); + if (dram) + mv_conf_mbus_windows(hpriv, dram); + + /* initialize adapter */ + ret = mv_init_host(host); + if (ret) { + printk(KERN_ERR DRV_NAME ": Error during HW init\n"); + return ret; + } + ata_host_resume(host); + } + + return 0; +} +#else +#define mv_platform_suspend NULL +#define mv_platform_resume NULL +#endif + +#ifdef CONFIG_OF +static struct of_device_id mv_sata_dt_ids[] = { + { .compatible = "marvell,armada-370-sata", }, + { .compatible = "marvell,orion-sata", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mv_sata_dt_ids); +#endif + +static struct platform_driver mv_platform_driver = { + .probe = mv_platform_probe, + .remove = mv_platform_remove, + .suspend = mv_platform_suspend, + .resume = mv_platform_resume, + .driver = { + .name = DRV_NAME, + .of_match_table = of_match_ptr(mv_sata_dt_ids), + }, +}; + + +#ifdef CONFIG_PCI +static int mv_pci_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent); +#ifdef CONFIG_PM_SLEEP +static int mv_pci_device_resume(struct pci_dev *pdev); +#endif + + +static struct pci_driver mv_pci_driver = { + .name = DRV_NAME, + .id_table = mv_pci_tbl, + .probe = mv_pci_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = mv_pci_device_resume, +#endif + +}; + +/* move to PCI layer or libata core? */ +static int pci_go_64(struct pci_dev *pdev) +{ + int rc; + + if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) { + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + if (rc) { + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, + "64-bit DMA enable failed\n"); + return rc; + } + } + } else { + rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, "32-bit DMA enable failed\n"); + return rc; + } + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, + "32-bit consistent DMA enable failed\n"); + return rc; + } + } + + return rc; +} + +/** + * mv_print_info - Dump key info to kernel log for perusal. + * @host: ATA host to print info about + * + * FIXME: complete this. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_print_info(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + struct mv_host_priv *hpriv = host->private_data; + u8 scc; + const char *scc_s, *gen; + + /* Use this to determine the HW stepping of the chip so we know + * what errata to workaround + */ + pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc); + if (scc == 0) + scc_s = "SCSI"; + else if (scc == 0x01) + scc_s = "RAID"; + else + scc_s = "?"; + + if (IS_GEN_I(hpriv)) + gen = "I"; + else if (IS_GEN_II(hpriv)) + gen = "II"; + else if (IS_GEN_IIE(hpriv)) + gen = "IIE"; + else + gen = "?"; + + dev_info(&pdev->dev, "Gen-%s %u slots %u ports %s mode IRQ via %s\n", + gen, (unsigned)MV_MAX_Q_DEPTH, host->n_ports, + scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx"); +} + +/** + * mv_pci_init_one - handle a positive probe of a PCI Marvell host + * @pdev: PCI device found + * @ent: PCI device ID entry for the matched host + * + * LOCKING: + * Inherited from caller. + */ +static int mv_pci_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + unsigned int board_idx = (unsigned int)ent->driver_data; + const struct ata_port_info *ppi[] = { &mv_port_info[board_idx], NULL }; + struct ata_host *host; + struct mv_host_priv *hpriv; + int n_ports, port, rc; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* allocate host */ + n_ports = mv_get_hc_count(ppi[0]->flags) * MV_PORTS_PER_HC; + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); + if (!host || !hpriv) + return -ENOMEM; + host->private_data = hpriv; + hpriv->n_ports = n_ports; + hpriv->board_idx = board_idx; + + /* acquire resources */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + rc = pcim_iomap_regions(pdev, 1 << MV_PRIMARY_BAR, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + host->iomap = pcim_iomap_table(pdev); + hpriv->base = host->iomap[MV_PRIMARY_BAR]; + + rc = pci_go_64(pdev); + if (rc) + return rc; + + rc = mv_create_dma_pools(hpriv, &pdev->dev); + if (rc) + return rc; + + for (port = 0; port < host->n_ports; port++) { + struct ata_port *ap = host->ports[port]; + void __iomem *port_mmio = mv_port_base(hpriv->base, port); + unsigned int offset = port_mmio - hpriv->base; + + ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port"); + } + + /* initialize adapter */ + rc = mv_init_host(host); + if (rc) + return rc; + + /* Enable message-switched interrupts, if requested */ + if (msi && pci_enable_msi(pdev) == 0) + hpriv->hp_flags |= MV_HP_FLAG_MSI; + + mv_dump_pci_cfg(pdev, 0x68); + mv_print_info(host); + + pci_set_master(pdev); + pci_try_set_mwi(pdev); + return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED, + IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht); +} + +#ifdef CONFIG_PM_SLEEP +static int mv_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + /* initialize adapter */ + rc = mv_init_host(host); + if (rc) + return rc; + + ata_host_resume(host); + + return 0; +} +#endif +#endif + +static int __init mv_init(void) +{ + int rc = -ENODEV; +#ifdef CONFIG_PCI + rc = pci_register_driver(&mv_pci_driver); + if (rc < 0) + return rc; +#endif + rc = platform_driver_register(&mv_platform_driver); + +#ifdef CONFIG_PCI + if (rc < 0) + pci_unregister_driver(&mv_pci_driver); +#endif + return rc; +} + +static void __exit mv_exit(void) +{ +#ifdef CONFIG_PCI + pci_unregister_driver(&mv_pci_driver); +#endif + platform_driver_unregister(&mv_platform_driver); +} + +MODULE_AUTHOR("Brett Russ"); +MODULE_DESCRIPTION("SCSI low-level driver for Marvell SATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, mv_pci_tbl); +MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("platform:" DRV_NAME); + +module_init(mv_init); +module_exit(mv_exit); diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c new file mode 100644 index 000000000..7ece85f43 --- /dev/null +++ b/drivers/ata/sata_nv.c @@ -0,0 +1,2519 @@ +/* + * sata_nv.c - NVIDIA nForce SATA + * + * Copyright 2004 NVIDIA Corp. All rights reserved. + * Copyright 2004 Andrew Chew + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * No hardware documentation available outside of NVIDIA. + * This driver programs the NVIDIA SATA controller in a similar + * fashion as with other PCI IDE BMDMA controllers, with a few + * NV-specific details such as register offsets, SATA phy location, + * hotplug info, etc. + * + * CK804/MCP04 controllers support an alternate programming interface + * similar to the ADMA specification (with some modifications). + * This allows the use of NCQ. Non-DMA-mapped ATA commands are still + * sent through the legacy interface. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_nv" +#define DRV_VERSION "3.5" + +#define NV_ADMA_DMA_BOUNDARY 0xffffffffUL + +enum { + NV_MMIO_BAR = 5, + + NV_PORTS = 2, + NV_PIO_MASK = ATA_PIO4, + NV_MWDMA_MASK = ATA_MWDMA2, + NV_UDMA_MASK = ATA_UDMA6, + NV_PORT0_SCR_REG_OFFSET = 0x00, + NV_PORT1_SCR_REG_OFFSET = 0x40, + + /* INT_STATUS/ENABLE */ + NV_INT_STATUS = 0x10, + NV_INT_ENABLE = 0x11, + NV_INT_STATUS_CK804 = 0x440, + NV_INT_ENABLE_CK804 = 0x441, + + /* INT_STATUS/ENABLE bits */ + NV_INT_DEV = 0x01, + NV_INT_PM = 0x02, + NV_INT_ADDED = 0x04, + NV_INT_REMOVED = 0x08, + + NV_INT_PORT_SHIFT = 4, /* each port occupies 4 bits */ + + NV_INT_ALL = 0x0f, + NV_INT_MASK = NV_INT_DEV | + NV_INT_ADDED | NV_INT_REMOVED, + + /* INT_CONFIG */ + NV_INT_CONFIG = 0x12, + NV_INT_CONFIG_METHD = 0x01, // 0 = INT, 1 = SMI + + // For PCI config register 20 + NV_MCP_SATA_CFG_20 = 0x50, + NV_MCP_SATA_CFG_20_SATA_SPACE_EN = 0x04, + NV_MCP_SATA_CFG_20_PORT0_EN = (1 << 17), + NV_MCP_SATA_CFG_20_PORT1_EN = (1 << 16), + NV_MCP_SATA_CFG_20_PORT0_PWB_EN = (1 << 14), + NV_MCP_SATA_CFG_20_PORT1_PWB_EN = (1 << 12), + + NV_ADMA_MAX_CPBS = 32, + NV_ADMA_CPB_SZ = 128, + NV_ADMA_APRD_SZ = 16, + NV_ADMA_SGTBL_LEN = (1024 - NV_ADMA_CPB_SZ) / + NV_ADMA_APRD_SZ, + NV_ADMA_SGTBL_TOTAL_LEN = NV_ADMA_SGTBL_LEN + 5, + NV_ADMA_SGTBL_SZ = NV_ADMA_SGTBL_LEN * NV_ADMA_APRD_SZ, + NV_ADMA_PORT_PRIV_DMA_SZ = NV_ADMA_MAX_CPBS * + (NV_ADMA_CPB_SZ + NV_ADMA_SGTBL_SZ), + + /* BAR5 offset to ADMA general registers */ + NV_ADMA_GEN = 0x400, + NV_ADMA_GEN_CTL = 0x00, + NV_ADMA_NOTIFIER_CLEAR = 0x30, + + /* BAR5 offset to ADMA ports */ + NV_ADMA_PORT = 0x480, + + /* size of ADMA port register space */ + NV_ADMA_PORT_SIZE = 0x100, + + /* ADMA port registers */ + NV_ADMA_CTL = 0x40, + NV_ADMA_CPB_COUNT = 0x42, + NV_ADMA_NEXT_CPB_IDX = 0x43, + NV_ADMA_STAT = 0x44, + NV_ADMA_CPB_BASE_LOW = 0x48, + NV_ADMA_CPB_BASE_HIGH = 0x4C, + NV_ADMA_APPEND = 0x50, + NV_ADMA_NOTIFIER = 0x68, + NV_ADMA_NOTIFIER_ERROR = 0x6C, + + /* NV_ADMA_CTL register bits */ + NV_ADMA_CTL_HOTPLUG_IEN = (1 << 0), + NV_ADMA_CTL_CHANNEL_RESET = (1 << 5), + NV_ADMA_CTL_GO = (1 << 7), + NV_ADMA_CTL_AIEN = (1 << 8), + NV_ADMA_CTL_READ_NON_COHERENT = (1 << 11), + NV_ADMA_CTL_WRITE_NON_COHERENT = (1 << 12), + + /* CPB response flag bits */ + NV_CPB_RESP_DONE = (1 << 0), + NV_CPB_RESP_ATA_ERR = (1 << 3), + NV_CPB_RESP_CMD_ERR = (1 << 4), + NV_CPB_RESP_CPB_ERR = (1 << 7), + + /* CPB control flag bits */ + NV_CPB_CTL_CPB_VALID = (1 << 0), + NV_CPB_CTL_QUEUE = (1 << 1), + NV_CPB_CTL_APRD_VALID = (1 << 2), + NV_CPB_CTL_IEN = (1 << 3), + NV_CPB_CTL_FPDMA = (1 << 4), + + /* APRD flags */ + NV_APRD_WRITE = (1 << 1), + NV_APRD_END = (1 << 2), + NV_APRD_CONT = (1 << 3), + + /* NV_ADMA_STAT flags */ + NV_ADMA_STAT_TIMEOUT = (1 << 0), + NV_ADMA_STAT_HOTUNPLUG = (1 << 1), + NV_ADMA_STAT_HOTPLUG = (1 << 2), + NV_ADMA_STAT_CPBERR = (1 << 4), + NV_ADMA_STAT_SERROR = (1 << 5), + NV_ADMA_STAT_CMD_COMPLETE = (1 << 6), + NV_ADMA_STAT_IDLE = (1 << 8), + NV_ADMA_STAT_LEGACY = (1 << 9), + NV_ADMA_STAT_STOPPED = (1 << 10), + NV_ADMA_STAT_DONE = (1 << 12), + NV_ADMA_STAT_ERR = NV_ADMA_STAT_CPBERR | + NV_ADMA_STAT_TIMEOUT, + + /* port flags */ + NV_ADMA_PORT_REGISTER_MODE = (1 << 0), + NV_ADMA_ATAPI_SETUP_COMPLETE = (1 << 1), + + /* MCP55 reg offset */ + NV_CTL_MCP55 = 0x400, + NV_INT_STATUS_MCP55 = 0x440, + NV_INT_ENABLE_MCP55 = 0x444, + NV_NCQ_REG_MCP55 = 0x448, + + /* MCP55 */ + NV_INT_ALL_MCP55 = 0xffff, + NV_INT_PORT_SHIFT_MCP55 = 16, /* each port occupies 16 bits */ + NV_INT_MASK_MCP55 = NV_INT_ALL_MCP55 & 0xfffd, + + /* SWNCQ ENABLE BITS*/ + NV_CTL_PRI_SWNCQ = 0x02, + NV_CTL_SEC_SWNCQ = 0x04, + + /* SW NCQ status bits*/ + NV_SWNCQ_IRQ_DEV = (1 << 0), + NV_SWNCQ_IRQ_PM = (1 << 1), + NV_SWNCQ_IRQ_ADDED = (1 << 2), + NV_SWNCQ_IRQ_REMOVED = (1 << 3), + + NV_SWNCQ_IRQ_BACKOUT = (1 << 4), + NV_SWNCQ_IRQ_SDBFIS = (1 << 5), + NV_SWNCQ_IRQ_DHREGFIS = (1 << 6), + NV_SWNCQ_IRQ_DMASETUP = (1 << 7), + + NV_SWNCQ_IRQ_HOTPLUG = NV_SWNCQ_IRQ_ADDED | + NV_SWNCQ_IRQ_REMOVED, + +}; + +/* ADMA Physical Region Descriptor - one SG segment */ +struct nv_adma_prd { + __le64 addr; + __le32 len; + u8 flags; + u8 packet_len; + __le16 reserved; +}; + +enum nv_adma_regbits { + CMDEND = (1 << 15), /* end of command list */ + WNB = (1 << 14), /* wait-not-BSY */ + IGN = (1 << 13), /* ignore this entry */ + CS1n = (1 << (4 + 8)), /* std. PATA signals follow... */ + DA2 = (1 << (2 + 8)), + DA1 = (1 << (1 + 8)), + DA0 = (1 << (0 + 8)), +}; + +/* ADMA Command Parameter Block + The first 5 SG segments are stored inside the Command Parameter Block itself. + If there are more than 5 segments the remainder are stored in a separate + memory area indicated by next_aprd. */ +struct nv_adma_cpb { + u8 resp_flags; /* 0 */ + u8 reserved1; /* 1 */ + u8 ctl_flags; /* 2 */ + /* len is length of taskfile in 64 bit words */ + u8 len; /* 3 */ + u8 tag; /* 4 */ + u8 next_cpb_idx; /* 5 */ + __le16 reserved2; /* 6-7 */ + __le16 tf[12]; /* 8-31 */ + struct nv_adma_prd aprd[5]; /* 32-111 */ + __le64 next_aprd; /* 112-119 */ + __le64 reserved3; /* 120-127 */ +}; + + +struct nv_adma_port_priv { + struct nv_adma_cpb *cpb; + dma_addr_t cpb_dma; + struct nv_adma_prd *aprd; + dma_addr_t aprd_dma; + void __iomem *ctl_block; + void __iomem *gen_block; + void __iomem *notifier_clear_block; + u64 adma_dma_mask; + u8 flags; + int last_issue_ncq; +}; + +struct nv_host_priv { + unsigned long type; +}; + +struct defer_queue { + u32 defer_bits; + unsigned int head; + unsigned int tail; + unsigned int tag[ATA_MAX_QUEUE]; +}; + +enum ncq_saw_flag_list { + ncq_saw_d2h = (1U << 0), + ncq_saw_dmas = (1U << 1), + ncq_saw_sdb = (1U << 2), + ncq_saw_backout = (1U << 3), +}; + +struct nv_swncq_port_priv { + struct ata_bmdma_prd *prd; /* our SG list */ + dma_addr_t prd_dma; /* and its DMA mapping */ + void __iomem *sactive_block; + void __iomem *irq_block; + void __iomem *tag_block; + u32 qc_active; + + unsigned int last_issue_tag; + + /* fifo circular queue to store deferral command */ + struct defer_queue defer_queue; + + /* for NCQ interrupt analysis */ + u32 dhfis_bits; + u32 dmafis_bits; + u32 sdbfis_bits; + + unsigned int ncq_flags; +}; + + +#define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & (1 << (19 + (12 * (PORT))))) + +static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +#ifdef CONFIG_PM_SLEEP +static int nv_pci_device_resume(struct pci_dev *pdev); +#endif +static void nv_ck804_host_stop(struct ata_host *host); +static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance); +static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance); +static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance); +static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); +static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); + +static int nv_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static void nv_nf2_freeze(struct ata_port *ap); +static void nv_nf2_thaw(struct ata_port *ap); +static void nv_ck804_freeze(struct ata_port *ap); +static void nv_ck804_thaw(struct ata_port *ap); +static int nv_adma_slave_config(struct scsi_device *sdev); +static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc); +static void nv_adma_qc_prep(struct ata_queued_cmd *qc); +static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc); +static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance); +static void nv_adma_irq_clear(struct ata_port *ap); +static int nv_adma_port_start(struct ata_port *ap); +static void nv_adma_port_stop(struct ata_port *ap); +#ifdef CONFIG_PM +static int nv_adma_port_suspend(struct ata_port *ap, pm_message_t mesg); +static int nv_adma_port_resume(struct ata_port *ap); +#endif +static void nv_adma_freeze(struct ata_port *ap); +static void nv_adma_thaw(struct ata_port *ap); +static void nv_adma_error_handler(struct ata_port *ap); +static void nv_adma_host_stop(struct ata_host *host); +static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc); +static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf); + +static void nv_mcp55_thaw(struct ata_port *ap); +static void nv_mcp55_freeze(struct ata_port *ap); +static void nv_swncq_error_handler(struct ata_port *ap); +static int nv_swncq_slave_config(struct scsi_device *sdev); +static int nv_swncq_port_start(struct ata_port *ap); +static void nv_swncq_qc_prep(struct ata_queued_cmd *qc); +static void nv_swncq_fill_sg(struct ata_queued_cmd *qc); +static unsigned int nv_swncq_qc_issue(struct ata_queued_cmd *qc); +static void nv_swncq_irq_clear(struct ata_port *ap, u16 fis); +static irqreturn_t nv_swncq_interrupt(int irq, void *dev_instance); +#ifdef CONFIG_PM +static int nv_swncq_port_suspend(struct ata_port *ap, pm_message_t mesg); +static int nv_swncq_port_resume(struct ata_port *ap); +#endif + +enum nv_host_type +{ + GENERIC, + NFORCE2, + NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */ + CK804, + ADMA, + MCP5x, + SWNCQ, +}; + +static const struct pci_device_id nv_pci_tbl[] = { + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA), NFORCE2 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA), NFORCE3 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2), NFORCE3 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA), CK804 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2), CK804 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA), CK804 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2), CK804 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), MCP5x }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), MCP5x }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), MCP5x }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), MCP5x }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC }, + + { } /* terminate list */ +}; + +static struct pci_driver nv_pci_driver = { + .name = DRV_NAME, + .id_table = nv_pci_tbl, + .probe = nv_init_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = nv_pci_device_resume, +#endif + .remove = ata_pci_remove_one, +}; + +static struct scsi_host_template nv_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct scsi_host_template nv_adma_sht = { + ATA_NCQ_SHT(DRV_NAME), + .can_queue = NV_ADMA_MAX_CPBS, + .sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN, + .dma_boundary = NV_ADMA_DMA_BOUNDARY, + .slave_configure = nv_adma_slave_config, +}; + +static struct scsi_host_template nv_swncq_sht = { + ATA_NCQ_SHT(DRV_NAME), + .can_queue = ATA_MAX_QUEUE, + .sg_tablesize = LIBATA_MAX_PRD, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = nv_swncq_slave_config, +}; + +/* + * NV SATA controllers have various different problems with hardreset + * protocol depending on the specific controller and device. + * + * GENERIC: + * + * bko11195 reports that link doesn't come online after hardreset on + * generic nv's and there have been several other similar reports on + * linux-ide. + * + * bko12351#c23 reports that warmplug on MCP61 doesn't work with + * softreset. + * + * NF2/3: + * + * bko3352 reports nf2/3 controllers can't determine device signature + * reliably after hardreset. The following thread reports detection + * failure on cold boot with the standard debouncing timing. + * + * http://thread.gmane.org/gmane.linux.ide/34098 + * + * bko12176 reports that hardreset fails to bring up the link during + * boot on nf2. + * + * CK804: + * + * For initial probing after boot and hot plugging, hardreset mostly + * works fine on CK804 but curiously, reprobing on the initial port + * by rescanning or rmmod/insmod fails to acquire the initial D2H Reg + * FIS in somewhat undeterministic way. + * + * SWNCQ: + * + * bko12351 reports that when SWNCQ is enabled, for hotplug to work, + * hardreset should be used and hardreset can't report proper + * signature, which suggests that mcp5x is closer to nf2 as long as + * reset quirkiness is concerned. + * + * bko12703 reports that boot probing fails for intel SSD with + * hardreset. Link fails to come online. Softreset works fine. + * + * The failures are varied but the following patterns seem true for + * all flavors. + * + * - Softreset during boot always works. + * + * - Hardreset during boot sometimes fails to bring up the link on + * certain comibnations and device signature acquisition is + * unreliable. + * + * - Hardreset is often necessary after hotplug. + * + * So, preferring softreset for boot probing and error handling (as + * hardreset might bring down the link) but using hardreset for + * post-boot probing should work around the above issues in most + * cases. Define nv_hardreset() which only kicks in for post-boot + * probing and use it for all variants. + */ +static struct ata_port_operations nv_generic_ops = { + .inherits = &ata_bmdma_port_ops, + .lost_interrupt = ATA_OP_NULL, + .scr_read = nv_scr_read, + .scr_write = nv_scr_write, + .hardreset = nv_hardreset, +}; + +static struct ata_port_operations nv_nf2_ops = { + .inherits = &nv_generic_ops, + .freeze = nv_nf2_freeze, + .thaw = nv_nf2_thaw, +}; + +static struct ata_port_operations nv_ck804_ops = { + .inherits = &nv_generic_ops, + .freeze = nv_ck804_freeze, + .thaw = nv_ck804_thaw, + .host_stop = nv_ck804_host_stop, +}; + +static struct ata_port_operations nv_adma_ops = { + .inherits = &nv_ck804_ops, + + .check_atapi_dma = nv_adma_check_atapi_dma, + .sff_tf_read = nv_adma_tf_read, + .qc_defer = ata_std_qc_defer, + .qc_prep = nv_adma_qc_prep, + .qc_issue = nv_adma_qc_issue, + .sff_irq_clear = nv_adma_irq_clear, + + .freeze = nv_adma_freeze, + .thaw = nv_adma_thaw, + .error_handler = nv_adma_error_handler, + .post_internal_cmd = nv_adma_post_internal_cmd, + + .port_start = nv_adma_port_start, + .port_stop = nv_adma_port_stop, +#ifdef CONFIG_PM + .port_suspend = nv_adma_port_suspend, + .port_resume = nv_adma_port_resume, +#endif + .host_stop = nv_adma_host_stop, +}; + +static struct ata_port_operations nv_swncq_ops = { + .inherits = &nv_generic_ops, + + .qc_defer = ata_std_qc_defer, + .qc_prep = nv_swncq_qc_prep, + .qc_issue = nv_swncq_qc_issue, + + .freeze = nv_mcp55_freeze, + .thaw = nv_mcp55_thaw, + .error_handler = nv_swncq_error_handler, + +#ifdef CONFIG_PM + .port_suspend = nv_swncq_port_suspend, + .port_resume = nv_swncq_port_resume, +#endif + .port_start = nv_swncq_port_start, +}; + +struct nv_pi_priv { + irq_handler_t irq_handler; + struct scsi_host_template *sht; +}; + +#define NV_PI_PRIV(_irq_handler, _sht) \ + &(struct nv_pi_priv){ .irq_handler = _irq_handler, .sht = _sht } + +static const struct ata_port_info nv_port_info[] = { + /* generic */ + { + .flags = ATA_FLAG_SATA, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_generic_ops, + .private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht), + }, + /* nforce2/3 */ + { + .flags = ATA_FLAG_SATA, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_nf2_ops, + .private_data = NV_PI_PRIV(nv_nf2_interrupt, &nv_sht), + }, + /* ck804 */ + { + .flags = ATA_FLAG_SATA, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_ck804_ops, + .private_data = NV_PI_PRIV(nv_ck804_interrupt, &nv_sht), + }, + /* ADMA */ + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NCQ, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_adma_ops, + .private_data = NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht), + }, + /* MCP5x */ + { + .flags = ATA_FLAG_SATA, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_generic_ops, + .private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht), + }, + /* SWNCQ */ + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NCQ, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_swncq_ops, + .private_data = NV_PI_PRIV(nv_swncq_interrupt, &nv_swncq_sht), + }, +}; + +MODULE_AUTHOR("NVIDIA"); +MODULE_DESCRIPTION("low-level driver for NVIDIA nForce SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, nv_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +static bool adma_enabled; +static bool swncq_enabled = 1; +static bool msi_enabled; + +static void nv_adma_register_mode(struct ata_port *ap) +{ + struct nv_adma_port_priv *pp = ap->private_data; + void __iomem *mmio = pp->ctl_block; + u16 tmp, status; + int count = 0; + + if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) + return; + + status = readw(mmio + NV_ADMA_STAT); + while (!(status & NV_ADMA_STAT_IDLE) && count < 20) { + ndelay(50); + status = readw(mmio + NV_ADMA_STAT); + count++; + } + if (count == 20) + ata_port_warn(ap, "timeout waiting for ADMA IDLE, stat=0x%hx\n", + status); + + tmp = readw(mmio + NV_ADMA_CTL); + writew(tmp & ~NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL); + + count = 0; + status = readw(mmio + NV_ADMA_STAT); + while (!(status & NV_ADMA_STAT_LEGACY) && count < 20) { + ndelay(50); + status = readw(mmio + NV_ADMA_STAT); + count++; + } + if (count == 20) + ata_port_warn(ap, + "timeout waiting for ADMA LEGACY, stat=0x%hx\n", + status); + + pp->flags |= NV_ADMA_PORT_REGISTER_MODE; +} + +static void nv_adma_mode(struct ata_port *ap) +{ + struct nv_adma_port_priv *pp = ap->private_data; + void __iomem *mmio = pp->ctl_block; + u16 tmp, status; + int count = 0; + + if (!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) + return; + + WARN_ON(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE); + + tmp = readw(mmio + NV_ADMA_CTL); + writew(tmp | NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL); + + status = readw(mmio + NV_ADMA_STAT); + while (((status & NV_ADMA_STAT_LEGACY) || + !(status & NV_ADMA_STAT_IDLE)) && count < 20) { + ndelay(50); + status = readw(mmio + NV_ADMA_STAT); + count++; + } + if (count == 20) + ata_port_warn(ap, + "timeout waiting for ADMA LEGACY clear and IDLE, stat=0x%hx\n", + status); + + pp->flags &= ~NV_ADMA_PORT_REGISTER_MODE; +} + +static int nv_adma_slave_config(struct scsi_device *sdev) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct nv_adma_port_priv *pp = ap->private_data; + struct nv_adma_port_priv *port0, *port1; + struct scsi_device *sdev0, *sdev1; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long segment_boundary, flags; + unsigned short sg_tablesize; + int rc; + int adma_enable; + u32 current_reg, new_reg, config_mask; + + rc = ata_scsi_slave_config(sdev); + + if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun) + /* Not a proper libata device, ignore */ + return rc; + + spin_lock_irqsave(ap->lock, flags); + + if (ap->link.device[sdev->id].class == ATA_DEV_ATAPI) { + /* + * NVIDIA reports that ADMA mode does not support ATAPI commands. + * Therefore ATAPI commands are sent through the legacy interface. + * However, the legacy interface only supports 32-bit DMA. + * Restrict DMA parameters as required by the legacy interface + * when an ATAPI device is connected. + */ + segment_boundary = ATA_DMA_BOUNDARY; + /* Subtract 1 since an extra entry may be needed for padding, see + libata-scsi.c */ + sg_tablesize = LIBATA_MAX_PRD - 1; + + /* Since the legacy DMA engine is in use, we need to disable ADMA + on the port. */ + adma_enable = 0; + nv_adma_register_mode(ap); + } else { + segment_boundary = NV_ADMA_DMA_BOUNDARY; + sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN; + adma_enable = 1; + } + + pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, ¤t_reg); + + if (ap->port_no == 1) + config_mask = NV_MCP_SATA_CFG_20_PORT1_EN | + NV_MCP_SATA_CFG_20_PORT1_PWB_EN; + else + config_mask = NV_MCP_SATA_CFG_20_PORT0_EN | + NV_MCP_SATA_CFG_20_PORT0_PWB_EN; + + if (adma_enable) { + new_reg = current_reg | config_mask; + pp->flags &= ~NV_ADMA_ATAPI_SETUP_COMPLETE; + } else { + new_reg = current_reg & ~config_mask; + pp->flags |= NV_ADMA_ATAPI_SETUP_COMPLETE; + } + + if (current_reg != new_reg) + pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, new_reg); + + port0 = ap->host->ports[0]->private_data; + port1 = ap->host->ports[1]->private_data; + sdev0 = ap->host->ports[0]->link.device[0].sdev; + sdev1 = ap->host->ports[1]->link.device[0].sdev; + if ((port0->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) || + (port1->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)) { + /** We have to set the DMA mask to 32-bit if either port is in + ATAPI mode, since they are on the same PCI device which is + used for DMA mapping. If we set the mask we also need to set + the bounce limit on both ports to ensure that the block + layer doesn't feed addresses that cause DMA mapping to + choke. If either SCSI device is not allocated yet, it's OK + since that port will discover its correct setting when it + does get allocated. + Note: Setting 32-bit mask should not fail. */ + if (sdev0) + blk_queue_bounce_limit(sdev0->request_queue, + ATA_DMA_MASK); + if (sdev1) + blk_queue_bounce_limit(sdev1->request_queue, + ATA_DMA_MASK); + + dma_set_mask(&pdev->dev, ATA_DMA_MASK); + } else { + /** This shouldn't fail as it was set to this value before */ + dma_set_mask(&pdev->dev, pp->adma_dma_mask); + if (sdev0) + blk_queue_bounce_limit(sdev0->request_queue, + pp->adma_dma_mask); + if (sdev1) + blk_queue_bounce_limit(sdev1->request_queue, + pp->adma_dma_mask); + } + + blk_queue_segment_boundary(sdev->request_queue, segment_boundary); + blk_queue_max_segments(sdev->request_queue, sg_tablesize); + ata_port_info(ap, + "DMA mask 0x%llX, segment boundary 0x%lX, hw segs %hu\n", + (unsigned long long)*ap->host->dev->dma_mask, + segment_boundary, sg_tablesize); + + spin_unlock_irqrestore(ap->lock, flags); + + return rc; +} + +static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct nv_adma_port_priv *pp = qc->ap->private_data; + return !(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE); +} + +static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + /* Other than when internal or pass-through commands are executed, + the only time this function will be called in ADMA mode will be + if a command fails. In the failure case we don't care about going + into register mode with ADMA commands pending, as the commands will + all shortly be aborted anyway. We assume that NCQ commands are not + issued via passthrough, which is the only way that switching into + ADMA mode could abort outstanding commands. */ + nv_adma_register_mode(ap); + + ata_sff_tf_read(ap, tf); +} + +static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb) +{ + unsigned int idx = 0; + + if (tf->flags & ATA_TFLAG_ISADDR) { + if (tf->flags & ATA_TFLAG_LBA48) { + cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->hob_feature | WNB); + cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect); + cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->hob_lbal); + cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->hob_lbam); + cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->hob_lbah); + cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature); + } else + cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature | WNB); + + cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->nsect); + cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->lbal); + cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->lbam); + cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->lbah); + } + + if (tf->flags & ATA_TFLAG_DEVICE) + cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device); + + cpb[idx++] = cpu_to_le16((ATA_REG_CMD << 8) | tf->command | CMDEND); + + while (idx < 12) + cpb[idx++] = cpu_to_le16(IGN); + + return idx; +} + +static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err) +{ + struct nv_adma_port_priv *pp = ap->private_data; + u8 flags = pp->cpb[cpb_num].resp_flags; + + VPRINTK("CPB %d, flags=0x%x\n", cpb_num, flags); + + if (unlikely((force_err || + flags & (NV_CPB_RESP_ATA_ERR | + NV_CPB_RESP_CMD_ERR | + NV_CPB_RESP_CPB_ERR)))) { + struct ata_eh_info *ehi = &ap->link.eh_info; + int freeze = 0; + + ata_ehi_clear_desc(ehi); + __ata_ehi_push_desc(ehi, "CPB resp_flags 0x%x: ", flags); + if (flags & NV_CPB_RESP_ATA_ERR) { + ata_ehi_push_desc(ehi, "ATA error"); + ehi->err_mask |= AC_ERR_DEV; + } else if (flags & NV_CPB_RESP_CMD_ERR) { + ata_ehi_push_desc(ehi, "CMD error"); + ehi->err_mask |= AC_ERR_DEV; + } else if (flags & NV_CPB_RESP_CPB_ERR) { + ata_ehi_push_desc(ehi, "CPB error"); + ehi->err_mask |= AC_ERR_SYSTEM; + freeze = 1; + } else { + /* notifier error, but no error in CPB flags? */ + ata_ehi_push_desc(ehi, "unknown"); + ehi->err_mask |= AC_ERR_OTHER; + freeze = 1; + } + /* Kill all commands. EH will determine what actually failed. */ + if (freeze) + ata_port_freeze(ap); + else + ata_port_abort(ap); + return -1; + } + + if (likely(flags & NV_CPB_RESP_DONE)) + return 1; + return 0; +} + +static int nv_host_intr(struct ata_port *ap, u8 irq_stat) +{ + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); + + /* freeze if hotplugged */ + if (unlikely(irq_stat & (NV_INT_ADDED | NV_INT_REMOVED))) { + ata_port_freeze(ap); + return 1; + } + + /* bail out if not our interrupt */ + if (!(irq_stat & NV_INT_DEV)) + return 0; + + /* DEV interrupt w/ no active qc? */ + if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { + ata_sff_check_status(ap); + return 1; + } + + /* handle interrupt */ + return ata_bmdma_port_intr(ap, qc); +} + +static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + int i, handled = 0; + u32 notifier_clears[2]; + + spin_lock(&host->lock); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + struct nv_adma_port_priv *pp = ap->private_data; + void __iomem *mmio = pp->ctl_block; + u16 status; + u32 gen_ctl; + u32 notifier, notifier_error; + + notifier_clears[i] = 0; + + /* if ADMA is disabled, use standard ata interrupt handler */ + if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) { + u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804) + >> (NV_INT_PORT_SHIFT * i); + handled += nv_host_intr(ap, irq_stat); + continue; + } + + /* if in ATA register mode, check for standard interrupts */ + if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) { + u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804) + >> (NV_INT_PORT_SHIFT * i); + if (ata_tag_valid(ap->link.active_tag)) + /** NV_INT_DEV indication seems unreliable + at times at least in ADMA mode. Force it + on always when a command is active, to + prevent losing interrupts. */ + irq_stat |= NV_INT_DEV; + handled += nv_host_intr(ap, irq_stat); + } + + notifier = readl(mmio + NV_ADMA_NOTIFIER); + notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR); + notifier_clears[i] = notifier | notifier_error; + + gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL); + + if (!NV_ADMA_CHECK_INTR(gen_ctl, ap->port_no) && !notifier && + !notifier_error) + /* Nothing to do */ + continue; + + status = readw(mmio + NV_ADMA_STAT); + + /* + * Clear status. Ensure the controller sees the + * clearing before we start looking at any of the CPB + * statuses, so that any CPB completions after this + * point in the handler will raise another interrupt. + */ + writew(status, mmio + NV_ADMA_STAT); + readw(mmio + NV_ADMA_STAT); /* flush posted write */ + rmb(); + + handled++; /* irq handled if we got here */ + + /* freeze if hotplugged or controller error */ + if (unlikely(status & (NV_ADMA_STAT_HOTPLUG | + NV_ADMA_STAT_HOTUNPLUG | + NV_ADMA_STAT_TIMEOUT | + NV_ADMA_STAT_SERROR))) { + struct ata_eh_info *ehi = &ap->link.eh_info; + + ata_ehi_clear_desc(ehi); + __ata_ehi_push_desc(ehi, "ADMA status 0x%08x: ", status); + if (status & NV_ADMA_STAT_TIMEOUT) { + ehi->err_mask |= AC_ERR_SYSTEM; + ata_ehi_push_desc(ehi, "timeout"); + } else if (status & NV_ADMA_STAT_HOTPLUG) { + ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, "hotplug"); + } else if (status & NV_ADMA_STAT_HOTUNPLUG) { + ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, "hot unplug"); + } else if (status & NV_ADMA_STAT_SERROR) { + /* let EH analyze SError and figure out cause */ + ata_ehi_push_desc(ehi, "SError"); + } else + ata_ehi_push_desc(ehi, "unknown"); + ata_port_freeze(ap); + continue; + } + + if (status & (NV_ADMA_STAT_DONE | + NV_ADMA_STAT_CPBERR | + NV_ADMA_STAT_CMD_COMPLETE)) { + u32 check_commands = notifier_clears[i]; + u32 done_mask = 0; + int pos, rc; + + if (status & NV_ADMA_STAT_CPBERR) { + /* check all active commands */ + if (ata_tag_valid(ap->link.active_tag)) + check_commands = 1 << + ap->link.active_tag; + else + check_commands = ap->link.sactive; + } + + /* check CPBs for completed commands */ + while ((pos = ffs(check_commands))) { + pos--; + rc = nv_adma_check_cpb(ap, pos, + notifier_error & (1 << pos)); + if (rc > 0) + done_mask |= 1 << pos; + else if (unlikely(rc < 0)) + check_commands = 0; + check_commands &= ~(1 << pos); + } + ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); + } + } + + if (notifier_clears[0] || notifier_clears[1]) { + /* Note: Both notifier clear registers must be written + if either is set, even if one is zero, according to NVIDIA. */ + struct nv_adma_port_priv *pp = host->ports[0]->private_data; + writel(notifier_clears[0], pp->notifier_clear_block); + pp = host->ports[1]->private_data; + writel(notifier_clears[1], pp->notifier_clear_block); + } + + spin_unlock(&host->lock); + + return IRQ_RETVAL(handled); +} + +static void nv_adma_freeze(struct ata_port *ap) +{ + struct nv_adma_port_priv *pp = ap->private_data; + void __iomem *mmio = pp->ctl_block; + u16 tmp; + + nv_ck804_freeze(ap); + + if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) + return; + + /* clear any outstanding CK804 notifications */ + writeb(NV_INT_ALL << (ap->port_no * NV_INT_PORT_SHIFT), + ap->host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804); + + /* Disable interrupt */ + tmp = readw(mmio + NV_ADMA_CTL); + writew(tmp & ~(NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN), + mmio + NV_ADMA_CTL); + readw(mmio + NV_ADMA_CTL); /* flush posted write */ +} + +static void nv_adma_thaw(struct ata_port *ap) +{ + struct nv_adma_port_priv *pp = ap->private_data; + void __iomem *mmio = pp->ctl_block; + u16 tmp; + + nv_ck804_thaw(ap); + + if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) + return; + + /* Enable interrupt */ + tmp = readw(mmio + NV_ADMA_CTL); + writew(tmp | (NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN), + mmio + NV_ADMA_CTL); + readw(mmio + NV_ADMA_CTL); /* flush posted write */ +} + +static void nv_adma_irq_clear(struct ata_port *ap) +{ + struct nv_adma_port_priv *pp = ap->private_data; + void __iomem *mmio = pp->ctl_block; + u32 notifier_clears[2]; + + if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) { + ata_bmdma_irq_clear(ap); + return; + } + + /* clear any outstanding CK804 notifications */ + writeb(NV_INT_ALL << (ap->port_no * NV_INT_PORT_SHIFT), + ap->host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804); + + /* clear ADMA status */ + writew(0xffff, mmio + NV_ADMA_STAT); + + /* clear notifiers - note both ports need to be written with + something even though we are only clearing on one */ + if (ap->port_no == 0) { + notifier_clears[0] = 0xFFFFFFFF; + notifier_clears[1] = 0; + } else { + notifier_clears[0] = 0; + notifier_clears[1] = 0xFFFFFFFF; + } + pp = ap->host->ports[0]->private_data; + writel(notifier_clears[0], pp->notifier_clear_block); + pp = ap->host->ports[1]->private_data; + writel(notifier_clears[1], pp->notifier_clear_block); +} + +static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct nv_adma_port_priv *pp = qc->ap->private_data; + + if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) + ata_bmdma_post_internal_cmd(qc); +} + +static int nv_adma_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct nv_adma_port_priv *pp; + int rc; + void *mem; + dma_addr_t mem_dma; + void __iomem *mmio; + struct pci_dev *pdev = to_pci_dev(dev); + u16 tmp; + + VPRINTK("ENTER\n"); + + /* Ensure DMA mask is set to 32-bit before allocating legacy PRD and + pad buffers */ + rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) + return rc; + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) + return rc; + + /* we might fallback to bmdma, allocate bmdma resources */ + rc = ata_bmdma_port_start(ap); + if (rc) + return rc; + + pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + + mmio = ap->host->iomap[NV_MMIO_BAR] + NV_ADMA_PORT + + ap->port_no * NV_ADMA_PORT_SIZE; + pp->ctl_block = mmio; + pp->gen_block = ap->host->iomap[NV_MMIO_BAR] + NV_ADMA_GEN; + pp->notifier_clear_block = pp->gen_block + + NV_ADMA_NOTIFIER_CLEAR + (4 * ap->port_no); + + /* Now that the legacy PRD and padding buffer are allocated we can + safely raise the DMA mask to allocate the CPB/APRD table. + These are allowed to fail since we store the value that ends up + being used to set as the bounce limit in slave_config later if + needed. */ + dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); + dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + pp->adma_dma_mask = *dev->dma_mask; + + mem = dmam_alloc_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ, + &mem_dma, GFP_KERNEL); + if (!mem) + return -ENOMEM; + memset(mem, 0, NV_ADMA_PORT_PRIV_DMA_SZ); + + /* + * First item in chunk of DMA memory: + * 128-byte command parameter block (CPB) + * one for each command tag + */ + pp->cpb = mem; + pp->cpb_dma = mem_dma; + + writel(mem_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW); + writel((mem_dma >> 16) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH); + + mem += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ; + mem_dma += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ; + + /* + * Second item: block of ADMA_SGTBL_LEN s/g entries + */ + pp->aprd = mem; + pp->aprd_dma = mem_dma; + + ap->private_data = pp; + + /* clear any outstanding interrupt conditions */ + writew(0xffff, mmio + NV_ADMA_STAT); + + /* initialize port variables */ + pp->flags = NV_ADMA_PORT_REGISTER_MODE; + + /* clear CPB fetch count */ + writew(0, mmio + NV_ADMA_CPB_COUNT); + + /* clear GO for register mode, enable interrupt */ + tmp = readw(mmio + NV_ADMA_CTL); + writew((tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN | + NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL); + + tmp = readw(mmio + NV_ADMA_CTL); + writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); + readw(mmio + NV_ADMA_CTL); /* flush posted write */ + udelay(1); + writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); + readw(mmio + NV_ADMA_CTL); /* flush posted write */ + + return 0; +} + +static void nv_adma_port_stop(struct ata_port *ap) +{ + struct nv_adma_port_priv *pp = ap->private_data; + void __iomem *mmio = pp->ctl_block; + + VPRINTK("ENTER\n"); + writew(0, mmio + NV_ADMA_CTL); +} + +#ifdef CONFIG_PM +static int nv_adma_port_suspend(struct ata_port *ap, pm_message_t mesg) +{ + struct nv_adma_port_priv *pp = ap->private_data; + void __iomem *mmio = pp->ctl_block; + + /* Go to register mode - clears GO */ + nv_adma_register_mode(ap); + + /* clear CPB fetch count */ + writew(0, mmio + NV_ADMA_CPB_COUNT); + + /* disable interrupt, shut down port */ + writew(0, mmio + NV_ADMA_CTL); + + return 0; +} + +static int nv_adma_port_resume(struct ata_port *ap) +{ + struct nv_adma_port_priv *pp = ap->private_data; + void __iomem *mmio = pp->ctl_block; + u16 tmp; + + /* set CPB block location */ + writel(pp->cpb_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW); + writel((pp->cpb_dma >> 16) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH); + + /* clear any outstanding interrupt conditions */ + writew(0xffff, mmio + NV_ADMA_STAT); + + /* initialize port variables */ + pp->flags |= NV_ADMA_PORT_REGISTER_MODE; + + /* clear CPB fetch count */ + writew(0, mmio + NV_ADMA_CPB_COUNT); + + /* clear GO for register mode, enable interrupt */ + tmp = readw(mmio + NV_ADMA_CTL); + writew((tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN | + NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL); + + tmp = readw(mmio + NV_ADMA_CTL); + writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); + readw(mmio + NV_ADMA_CTL); /* flush posted write */ + udelay(1); + writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); + readw(mmio + NV_ADMA_CTL); /* flush posted write */ + + return 0; +} +#endif + +static void nv_adma_setup_port(struct ata_port *ap) +{ + void __iomem *mmio = ap->host->iomap[NV_MMIO_BAR]; + struct ata_ioports *ioport = &ap->ioaddr; + + VPRINTK("ENTER\n"); + + mmio += NV_ADMA_PORT + ap->port_no * NV_ADMA_PORT_SIZE; + + ioport->cmd_addr = mmio; + ioport->data_addr = mmio + (ATA_REG_DATA * 4); + ioport->error_addr = + ioport->feature_addr = mmio + (ATA_REG_ERR * 4); + ioport->nsect_addr = mmio + (ATA_REG_NSECT * 4); + ioport->lbal_addr = mmio + (ATA_REG_LBAL * 4); + ioport->lbam_addr = mmio + (ATA_REG_LBAM * 4); + ioport->lbah_addr = mmio + (ATA_REG_LBAH * 4); + ioport->device_addr = mmio + (ATA_REG_DEVICE * 4); + ioport->status_addr = + ioport->command_addr = mmio + (ATA_REG_STATUS * 4); + ioport->altstatus_addr = + ioport->ctl_addr = mmio + 0x20; +} + +static int nv_adma_host_init(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + unsigned int i; + u32 tmp32; + + VPRINTK("ENTER\n"); + + /* enable ADMA on the ports */ + pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32); + tmp32 |= NV_MCP_SATA_CFG_20_PORT0_EN | + NV_MCP_SATA_CFG_20_PORT0_PWB_EN | + NV_MCP_SATA_CFG_20_PORT1_EN | + NV_MCP_SATA_CFG_20_PORT1_PWB_EN; + + pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32); + + for (i = 0; i < host->n_ports; i++) + nv_adma_setup_port(host->ports[i]); + + return 0; +} + +static void nv_adma_fill_aprd(struct ata_queued_cmd *qc, + struct scatterlist *sg, + int idx, + struct nv_adma_prd *aprd) +{ + u8 flags = 0; + if (qc->tf.flags & ATA_TFLAG_WRITE) + flags |= NV_APRD_WRITE; + if (idx == qc->n_elem - 1) + flags |= NV_APRD_END; + else if (idx != 4) + flags |= NV_APRD_CONT; + + aprd->addr = cpu_to_le64(((u64)sg_dma_address(sg))); + aprd->len = cpu_to_le32(((u32)sg_dma_len(sg))); /* len in bytes */ + aprd->flags = flags; + aprd->packet_len = 0; +} + +static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb) +{ + struct nv_adma_port_priv *pp = qc->ap->private_data; + struct nv_adma_prd *aprd; + struct scatterlist *sg; + unsigned int si; + + VPRINTK("ENTER\n"); + + for_each_sg(qc->sg, sg, qc->n_elem, si) { + aprd = (si < 5) ? &cpb->aprd[si] : + &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (si-5)]; + nv_adma_fill_aprd(qc, sg, si, aprd); + } + if (si > 5) + cpb->next_aprd = cpu_to_le64(((u64)(pp->aprd_dma + NV_ADMA_SGTBL_SZ * qc->tag))); + else + cpb->next_aprd = cpu_to_le64(0); +} + +static int nv_adma_use_reg_mode(struct ata_queued_cmd *qc) +{ + struct nv_adma_port_priv *pp = qc->ap->private_data; + + /* ADMA engine can only be used for non-ATAPI DMA commands, + or interrupt-driven no-data commands. */ + if ((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) || + (qc->tf.flags & ATA_TFLAG_POLLING)) + return 1; + + if ((qc->flags & ATA_QCFLAG_DMAMAP) || + (qc->tf.protocol == ATA_PROT_NODATA)) + return 0; + + return 1; +} + +static void nv_adma_qc_prep(struct ata_queued_cmd *qc) +{ + struct nv_adma_port_priv *pp = qc->ap->private_data; + struct nv_adma_cpb *cpb = &pp->cpb[qc->tag]; + u8 ctl_flags = NV_CPB_CTL_CPB_VALID | + NV_CPB_CTL_IEN; + + if (nv_adma_use_reg_mode(qc)) { + BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) && + (qc->flags & ATA_QCFLAG_DMAMAP)); + nv_adma_register_mode(qc->ap); + ata_bmdma_qc_prep(qc); + return; + } + + cpb->resp_flags = NV_CPB_RESP_DONE; + wmb(); + cpb->ctl_flags = 0; + wmb(); + + cpb->len = 3; + cpb->tag = qc->tag; + cpb->next_cpb_idx = 0; + + /* turn on NCQ flags for NCQ commands */ + if (qc->tf.protocol == ATA_PROT_NCQ) + ctl_flags |= NV_CPB_CTL_QUEUE | NV_CPB_CTL_FPDMA; + + VPRINTK("qc->flags = 0x%lx\n", qc->flags); + + nv_adma_tf_to_cpb(&qc->tf, cpb->tf); + + if (qc->flags & ATA_QCFLAG_DMAMAP) { + nv_adma_fill_sg(qc, cpb); + ctl_flags |= NV_CPB_CTL_APRD_VALID; + } else + memset(&cpb->aprd[0], 0, sizeof(struct nv_adma_prd) * 5); + + /* Be paranoid and don't let the device see NV_CPB_CTL_CPB_VALID + until we are finished filling in all of the contents */ + wmb(); + cpb->ctl_flags = ctl_flags; + wmb(); + cpb->resp_flags = 0; +} + +static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc) +{ + struct nv_adma_port_priv *pp = qc->ap->private_data; + void __iomem *mmio = pp->ctl_block; + int curr_ncq = (qc->tf.protocol == ATA_PROT_NCQ); + + VPRINTK("ENTER\n"); + + /* We can't handle result taskfile with NCQ commands, since + retrieving the taskfile switches us out of ADMA mode and would abort + existing commands. */ + if (unlikely(qc->tf.protocol == ATA_PROT_NCQ && + (qc->flags & ATA_QCFLAG_RESULT_TF))) { + ata_dev_err(qc->dev, "NCQ w/ RESULT_TF not allowed\n"); + return AC_ERR_SYSTEM; + } + + if (nv_adma_use_reg_mode(qc)) { + /* use ATA register mode */ + VPRINTK("using ATA register mode: 0x%lx\n", qc->flags); + BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) && + (qc->flags & ATA_QCFLAG_DMAMAP)); + nv_adma_register_mode(qc->ap); + return ata_bmdma_qc_issue(qc); + } else + nv_adma_mode(qc->ap); + + /* write append register, command tag in lower 8 bits + and (number of cpbs to append -1) in top 8 bits */ + wmb(); + + if (curr_ncq != pp->last_issue_ncq) { + /* Seems to need some delay before switching between NCQ and + non-NCQ commands, else we get command timeouts and such. */ + udelay(20); + pp->last_issue_ncq = curr_ncq; + } + + writew(qc->tag, mmio + NV_ADMA_APPEND); + + DPRINTK("Issued tag %u\n", qc->tag); + + return 0; +} + +static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + unsigned int i; + unsigned int handled = 0; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { + handled += ata_bmdma_port_intr(ap, qc); + } else { + /* + * No request pending? Clear interrupt status + * anyway, in case there's one pending. + */ + ap->ops->sff_check_status(ap); + } + } + + spin_unlock_irqrestore(&host->lock, flags); + + return IRQ_RETVAL(handled); +} + +static irqreturn_t nv_do_interrupt(struct ata_host *host, u8 irq_stat) +{ + int i, handled = 0; + + for (i = 0; i < host->n_ports; i++) { + handled += nv_host_intr(host->ports[i], irq_stat); + irq_stat >>= NV_INT_PORT_SHIFT; + } + + return IRQ_RETVAL(handled); +} + +static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + u8 irq_stat; + irqreturn_t ret; + + spin_lock(&host->lock); + irq_stat = ioread8(host->ports[0]->ioaddr.scr_addr + NV_INT_STATUS); + ret = nv_do_interrupt(host, irq_stat); + spin_unlock(&host->lock); + + return ret; +} + +static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + u8 irq_stat; + irqreturn_t ret; + + spin_lock(&host->lock); + irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804); + ret = nv_do_interrupt(host, irq_stat); + spin_unlock(&host->lock); + + return ret; +} + +static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) +{ + if (sc_reg > SCR_CONTROL) + return -EINVAL; + + *val = ioread32(link->ap->ioaddr.scr_addr + (sc_reg * 4)); + return 0; +} + +static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) +{ + if (sc_reg > SCR_CONTROL) + return -EINVAL; + + iowrite32(val, link->ap->ioaddr.scr_addr + (sc_reg * 4)); + return 0; +} + +static int nv_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_eh_context *ehc = &link->eh_context; + + /* Do hardreset iff it's post-boot probing, please read the + * comment above port ops for details. + */ + if (!(link->ap->pflags & ATA_PFLAG_LOADING) && + !ata_dev_enabled(link->device)) + sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, + NULL, NULL); + else { + const unsigned long *timing = sata_ehc_deb_timing(ehc); + int rc; + + if (!(ehc->i.flags & ATA_EHI_QUIET)) + ata_link_info(link, + "nv: skipping hardreset on occupied port\n"); + + /* make sure the link is online */ + rc = sata_link_resume(link, timing, deadline); + /* whine about phy resume failure but proceed */ + if (rc && rc != -EOPNOTSUPP) + ata_link_warn(link, "failed to resume link (errno=%d)\n", + rc); + } + + /* device signature acquisition is unreliable */ + return -EAGAIN; +} + +static void nv_nf2_freeze(struct ata_port *ap) +{ + void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr; + int shift = ap->port_no * NV_INT_PORT_SHIFT; + u8 mask; + + mask = ioread8(scr_addr + NV_INT_ENABLE); + mask &= ~(NV_INT_ALL << shift); + iowrite8(mask, scr_addr + NV_INT_ENABLE); +} + +static void nv_nf2_thaw(struct ata_port *ap) +{ + void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr; + int shift = ap->port_no * NV_INT_PORT_SHIFT; + u8 mask; + + iowrite8(NV_INT_ALL << shift, scr_addr + NV_INT_STATUS); + + mask = ioread8(scr_addr + NV_INT_ENABLE); + mask |= (NV_INT_MASK << shift); + iowrite8(mask, scr_addr + NV_INT_ENABLE); +} + +static void nv_ck804_freeze(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR]; + int shift = ap->port_no * NV_INT_PORT_SHIFT; + u8 mask; + + mask = readb(mmio_base + NV_INT_ENABLE_CK804); + mask &= ~(NV_INT_ALL << shift); + writeb(mask, mmio_base + NV_INT_ENABLE_CK804); +} + +static void nv_ck804_thaw(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR]; + int shift = ap->port_no * NV_INT_PORT_SHIFT; + u8 mask; + + writeb(NV_INT_ALL << shift, mmio_base + NV_INT_STATUS_CK804); + + mask = readb(mmio_base + NV_INT_ENABLE_CK804); + mask |= (NV_INT_MASK << shift); + writeb(mask, mmio_base + NV_INT_ENABLE_CK804); +} + +static void nv_mcp55_freeze(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR]; + int shift = ap->port_no * NV_INT_PORT_SHIFT_MCP55; + u32 mask; + + writel(NV_INT_ALL_MCP55 << shift, mmio_base + NV_INT_STATUS_MCP55); + + mask = readl(mmio_base + NV_INT_ENABLE_MCP55); + mask &= ~(NV_INT_ALL_MCP55 << shift); + writel(mask, mmio_base + NV_INT_ENABLE_MCP55); +} + +static void nv_mcp55_thaw(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR]; + int shift = ap->port_no * NV_INT_PORT_SHIFT_MCP55; + u32 mask; + + writel(NV_INT_ALL_MCP55 << shift, mmio_base + NV_INT_STATUS_MCP55); + + mask = readl(mmio_base + NV_INT_ENABLE_MCP55); + mask |= (NV_INT_MASK_MCP55 << shift); + writel(mask, mmio_base + NV_INT_ENABLE_MCP55); +} + +static void nv_adma_error_handler(struct ata_port *ap) +{ + struct nv_adma_port_priv *pp = ap->private_data; + if (!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) { + void __iomem *mmio = pp->ctl_block; + int i; + u16 tmp; + + if (ata_tag_valid(ap->link.active_tag) || ap->link.sactive) { + u32 notifier = readl(mmio + NV_ADMA_NOTIFIER); + u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR); + u32 gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL); + u32 status = readw(mmio + NV_ADMA_STAT); + u8 cpb_count = readb(mmio + NV_ADMA_CPB_COUNT); + u8 next_cpb_idx = readb(mmio + NV_ADMA_NEXT_CPB_IDX); + + ata_port_err(ap, + "EH in ADMA mode, notifier 0x%X " + "notifier_error 0x%X gen_ctl 0x%X status 0x%X " + "next cpb count 0x%X next cpb idx 0x%x\n", + notifier, notifier_error, gen_ctl, status, + cpb_count, next_cpb_idx); + + for (i = 0; i < NV_ADMA_MAX_CPBS; i++) { + struct nv_adma_cpb *cpb = &pp->cpb[i]; + if ((ata_tag_valid(ap->link.active_tag) && i == ap->link.active_tag) || + ap->link.sactive & (1 << i)) + ata_port_err(ap, + "CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n", + i, cpb->ctl_flags, cpb->resp_flags); + } + } + + /* Push us back into port register mode for error handling. */ + nv_adma_register_mode(ap); + + /* Mark all of the CPBs as invalid to prevent them from + being executed */ + for (i = 0; i < NV_ADMA_MAX_CPBS; i++) + pp->cpb[i].ctl_flags &= ~NV_CPB_CTL_CPB_VALID; + + /* clear CPB fetch count */ + writew(0, mmio + NV_ADMA_CPB_COUNT); + + /* Reset channel */ + tmp = readw(mmio + NV_ADMA_CTL); + writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); + readw(mmio + NV_ADMA_CTL); /* flush posted write */ + udelay(1); + writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); + readw(mmio + NV_ADMA_CTL); /* flush posted write */ + } + + ata_bmdma_error_handler(ap); +} + +static void nv_swncq_qc_to_dq(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + struct nv_swncq_port_priv *pp = ap->private_data; + struct defer_queue *dq = &pp->defer_queue; + + /* queue is full */ + WARN_ON(dq->tail - dq->head == ATA_MAX_QUEUE); + dq->defer_bits |= (1 << qc->tag); + dq->tag[dq->tail++ & (ATA_MAX_QUEUE - 1)] = qc->tag; +} + +static struct ata_queued_cmd *nv_swncq_qc_from_dq(struct ata_port *ap) +{ + struct nv_swncq_port_priv *pp = ap->private_data; + struct defer_queue *dq = &pp->defer_queue; + unsigned int tag; + + if (dq->head == dq->tail) /* null queue */ + return NULL; + + tag = dq->tag[dq->head & (ATA_MAX_QUEUE - 1)]; + dq->tag[dq->head++ & (ATA_MAX_QUEUE - 1)] = ATA_TAG_POISON; + WARN_ON(!(dq->defer_bits & (1 << tag))); + dq->defer_bits &= ~(1 << tag); + + return ata_qc_from_tag(ap, tag); +} + +static void nv_swncq_fis_reinit(struct ata_port *ap) +{ + struct nv_swncq_port_priv *pp = ap->private_data; + + pp->dhfis_bits = 0; + pp->dmafis_bits = 0; + pp->sdbfis_bits = 0; + pp->ncq_flags = 0; +} + +static void nv_swncq_pp_reinit(struct ata_port *ap) +{ + struct nv_swncq_port_priv *pp = ap->private_data; + struct defer_queue *dq = &pp->defer_queue; + + dq->head = 0; + dq->tail = 0; + dq->defer_bits = 0; + pp->qc_active = 0; + pp->last_issue_tag = ATA_TAG_POISON; + nv_swncq_fis_reinit(ap); +} + +static void nv_swncq_irq_clear(struct ata_port *ap, u16 fis) +{ + struct nv_swncq_port_priv *pp = ap->private_data; + + writew(fis, pp->irq_block); +} + +static void __ata_bmdma_stop(struct ata_port *ap) +{ + struct ata_queued_cmd qc; + + qc.ap = ap; + ata_bmdma_stop(&qc); +} + +static void nv_swncq_ncq_stop(struct ata_port *ap) +{ + struct nv_swncq_port_priv *pp = ap->private_data; + unsigned int i; + u32 sactive; + u32 done_mask; + + ata_port_err(ap, "EH in SWNCQ mode,QC:qc_active 0x%X sactive 0x%X\n", + ap->qc_active, ap->link.sactive); + ata_port_err(ap, + "SWNCQ:qc_active 0x%X defer_bits 0x%X last_issue_tag 0x%x\n " + "dhfis 0x%X dmafis 0x%X sdbfis 0x%X\n", + pp->qc_active, pp->defer_queue.defer_bits, pp->last_issue_tag, + pp->dhfis_bits, pp->dmafis_bits, pp->sdbfis_bits); + + ata_port_err(ap, "ATA_REG 0x%X ERR_REG 0x%X\n", + ap->ops->sff_check_status(ap), + ioread8(ap->ioaddr.error_addr)); + + sactive = readl(pp->sactive_block); + done_mask = pp->qc_active ^ sactive; + + ata_port_err(ap, "tag : dhfis dmafis sdbfis sactive\n"); + for (i = 0; i < ATA_MAX_QUEUE; i++) { + u8 err = 0; + if (pp->qc_active & (1 << i)) + err = 0; + else if (done_mask & (1 << i)) + err = 1; + else + continue; + + ata_port_err(ap, + "tag 0x%x: %01x %01x %01x %01x %s\n", i, + (pp->dhfis_bits >> i) & 0x1, + (pp->dmafis_bits >> i) & 0x1, + (pp->sdbfis_bits >> i) & 0x1, + (sactive >> i) & 0x1, + (err ? "error! tag doesn't exit" : " ")); + } + + nv_swncq_pp_reinit(ap); + ap->ops->sff_irq_clear(ap); + __ata_bmdma_stop(ap); + nv_swncq_irq_clear(ap, 0xffff); +} + +static void nv_swncq_error_handler(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->link.eh_context; + + if (ap->link.sactive) { + nv_swncq_ncq_stop(ap); + ehc->i.action |= ATA_EH_RESET; + } + + ata_bmdma_error_handler(ap); +} + +#ifdef CONFIG_PM +static int nv_swncq_port_suspend(struct ata_port *ap, pm_message_t mesg) +{ + void __iomem *mmio = ap->host->iomap[NV_MMIO_BAR]; + u32 tmp; + + /* clear irq */ + writel(~0, mmio + NV_INT_STATUS_MCP55); + + /* disable irq */ + writel(0, mmio + NV_INT_ENABLE_MCP55); + + /* disable swncq */ + tmp = readl(mmio + NV_CTL_MCP55); + tmp &= ~(NV_CTL_PRI_SWNCQ | NV_CTL_SEC_SWNCQ); + writel(tmp, mmio + NV_CTL_MCP55); + + return 0; +} + +static int nv_swncq_port_resume(struct ata_port *ap) +{ + void __iomem *mmio = ap->host->iomap[NV_MMIO_BAR]; + u32 tmp; + + /* clear irq */ + writel(~0, mmio + NV_INT_STATUS_MCP55); + + /* enable irq */ + writel(0x00fd00fd, mmio + NV_INT_ENABLE_MCP55); + + /* enable swncq */ + tmp = readl(mmio + NV_CTL_MCP55); + writel(tmp | NV_CTL_PRI_SWNCQ | NV_CTL_SEC_SWNCQ, mmio + NV_CTL_MCP55); + + return 0; +} +#endif + +static void nv_swncq_host_init(struct ata_host *host) +{ + u32 tmp; + void __iomem *mmio = host->iomap[NV_MMIO_BAR]; + struct pci_dev *pdev = to_pci_dev(host->dev); + u8 regval; + + /* disable ECO 398 */ + pci_read_config_byte(pdev, 0x7f, ®val); + regval &= ~(1 << 7); + pci_write_config_byte(pdev, 0x7f, regval); + + /* enable swncq */ + tmp = readl(mmio + NV_CTL_MCP55); + VPRINTK("HOST_CTL:0x%X\n", tmp); + writel(tmp | NV_CTL_PRI_SWNCQ | NV_CTL_SEC_SWNCQ, mmio + NV_CTL_MCP55); + + /* enable irq intr */ + tmp = readl(mmio + NV_INT_ENABLE_MCP55); + VPRINTK("HOST_ENABLE:0x%X\n", tmp); + writel(tmp | 0x00fd00fd, mmio + NV_INT_ENABLE_MCP55); + + /* clear port irq */ + writel(~0x0, mmio + NV_INT_STATUS_MCP55); +} + +static int nv_swncq_slave_config(struct scsi_device *sdev) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_device *dev; + int rc; + u8 rev; + u8 check_maxtor = 0; + unsigned char model_num[ATA_ID_PROD_LEN + 1]; + + rc = ata_scsi_slave_config(sdev); + if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun) + /* Not a proper libata device, ignore */ + return rc; + + dev = &ap->link.device[sdev->id]; + if (!(ap->flags & ATA_FLAG_NCQ) || dev->class == ATA_DEV_ATAPI) + return rc; + + /* if MCP51 and Maxtor, then disable ncq */ + if (pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA || + pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2) + check_maxtor = 1; + + /* if MCP55 and rev <= a2 and Maxtor, then disable ncq */ + if (pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA || + pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2) { + pci_read_config_byte(pdev, 0x8, &rev); + if (rev <= 0xa2) + check_maxtor = 1; + } + + if (!check_maxtor) + return rc; + + ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num)); + + if (strncmp(model_num, "Maxtor", 6) == 0) { + ata_scsi_change_queue_depth(sdev, 1); + ata_dev_notice(dev, "Disabling SWNCQ mode (depth %x)\n", + sdev->queue_depth); + } + + return rc; +} + +static int nv_swncq_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + void __iomem *mmio = ap->host->iomap[NV_MMIO_BAR]; + struct nv_swncq_port_priv *pp; + int rc; + + /* we might fallback to bmdma, allocate bmdma resources */ + rc = ata_bmdma_port_start(ap); + if (rc) + return rc; + + pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + + pp->prd = dmam_alloc_coherent(dev, ATA_PRD_TBL_SZ * ATA_MAX_QUEUE, + &pp->prd_dma, GFP_KERNEL); + if (!pp->prd) + return -ENOMEM; + memset(pp->prd, 0, ATA_PRD_TBL_SZ * ATA_MAX_QUEUE); + + ap->private_data = pp; + pp->sactive_block = ap->ioaddr.scr_addr + 4 * SCR_ACTIVE; + pp->irq_block = mmio + NV_INT_STATUS_MCP55 + ap->port_no * 2; + pp->tag_block = mmio + NV_NCQ_REG_MCP55 + ap->port_no * 2; + + return 0; +} + +static void nv_swncq_qc_prep(struct ata_queued_cmd *qc) +{ + if (qc->tf.protocol != ATA_PROT_NCQ) { + ata_bmdma_qc_prep(qc); + return; + } + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + nv_swncq_fill_sg(qc); +} + +static void nv_swncq_fill_sg(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scatterlist *sg; + struct nv_swncq_port_priv *pp = ap->private_data; + struct ata_bmdma_prd *prd; + unsigned int si, idx; + + prd = pp->prd + ATA_MAX_PRD * qc->tag; + + idx = 0; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + u32 addr, offset; + u32 sg_len, len; + + addr = (u32)sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + while (sg_len) { + offset = addr & 0xffff; + len = sg_len; + if ((offset + sg_len) > 0x10000) + len = 0x10000 - offset; + + prd[idx].addr = cpu_to_le32(addr); + prd[idx].flags_len = cpu_to_le32(len & 0xffff); + + idx++; + sg_len -= len; + addr += len; + } + } + + prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); +} + +static unsigned int nv_swncq_issue_atacmd(struct ata_port *ap, + struct ata_queued_cmd *qc) +{ + struct nv_swncq_port_priv *pp = ap->private_data; + + if (qc == NULL) + return 0; + + DPRINTK("Enter\n"); + + writel((1 << qc->tag), pp->sactive_block); + pp->last_issue_tag = qc->tag; + pp->dhfis_bits &= ~(1 << qc->tag); + pp->dmafis_bits &= ~(1 << qc->tag); + pp->qc_active |= (0x1 << qc->tag); + + ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */ + ap->ops->sff_exec_command(ap, &qc->tf); + + DPRINTK("Issued tag %u\n", qc->tag); + + return 0; +} + +static unsigned int nv_swncq_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct nv_swncq_port_priv *pp = ap->private_data; + + if (qc->tf.protocol != ATA_PROT_NCQ) + return ata_bmdma_qc_issue(qc); + + DPRINTK("Enter\n"); + + if (!pp->qc_active) + nv_swncq_issue_atacmd(ap, qc); + else + nv_swncq_qc_to_dq(ap, qc); /* add qc to defer queue */ + + return 0; +} + +static void nv_swncq_hotplug(struct ata_port *ap, u32 fis) +{ + u32 serror; + struct ata_eh_info *ehi = &ap->link.eh_info; + + ata_ehi_clear_desc(ehi); + + /* AHCI needs SError cleared; otherwise, it might lock up */ + sata_scr_read(&ap->link, SCR_ERROR, &serror); + sata_scr_write(&ap->link, SCR_ERROR, serror); + + /* analyze @irq_stat */ + if (fis & NV_SWNCQ_IRQ_ADDED) + ata_ehi_push_desc(ehi, "hot plug"); + else if (fis & NV_SWNCQ_IRQ_REMOVED) + ata_ehi_push_desc(ehi, "hot unplug"); + + ata_ehi_hotplugged(ehi); + + /* okay, let's hand over to EH */ + ehi->serror |= serror; + + ata_port_freeze(ap); +} + +static int nv_swncq_sdbfis(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + struct nv_swncq_port_priv *pp = ap->private_data; + struct ata_eh_info *ehi = &ap->link.eh_info; + u32 sactive; + u32 done_mask; + u8 host_stat; + u8 lack_dhfis = 0; + + host_stat = ap->ops->bmdma_status(ap); + if (unlikely(host_stat & ATA_DMA_ERR)) { + /* error when transferring data to/from memory */ + ata_ehi_clear_desc(ehi); + ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat); + ehi->err_mask |= AC_ERR_HOST_BUS; + ehi->action |= ATA_EH_RESET; + return -EINVAL; + } + + ap->ops->sff_irq_clear(ap); + __ata_bmdma_stop(ap); + + sactive = readl(pp->sactive_block); + done_mask = pp->qc_active ^ sactive; + + pp->qc_active &= ~done_mask; + pp->dhfis_bits &= ~done_mask; + pp->dmafis_bits &= ~done_mask; + pp->sdbfis_bits |= done_mask; + ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); + + if (!ap->qc_active) { + DPRINTK("over\n"); + nv_swncq_pp_reinit(ap); + return 0; + } + + if (pp->qc_active & pp->dhfis_bits) + return 0; + + if ((pp->ncq_flags & ncq_saw_backout) || + (pp->qc_active ^ pp->dhfis_bits)) + /* if the controller can't get a device to host register FIS, + * The driver needs to reissue the new command. + */ + lack_dhfis = 1; + + DPRINTK("id 0x%x QC: qc_active 0x%x," + "SWNCQ:qc_active 0x%X defer_bits %X " + "dhfis 0x%X dmafis 0x%X last_issue_tag %x\n", + ap->print_id, ap->qc_active, pp->qc_active, + pp->defer_queue.defer_bits, pp->dhfis_bits, + pp->dmafis_bits, pp->last_issue_tag); + + nv_swncq_fis_reinit(ap); + + if (lack_dhfis) { + qc = ata_qc_from_tag(ap, pp->last_issue_tag); + nv_swncq_issue_atacmd(ap, qc); + return 0; + } + + if (pp->defer_queue.defer_bits) { + /* send deferral queue command */ + qc = nv_swncq_qc_from_dq(ap); + WARN_ON(qc == NULL); + nv_swncq_issue_atacmd(ap, qc); + } + + return 0; +} + +static inline u32 nv_swncq_tag(struct ata_port *ap) +{ + struct nv_swncq_port_priv *pp = ap->private_data; + u32 tag; + + tag = readb(pp->tag_block) >> 2; + return (tag & 0x1f); +} + +static void nv_swncq_dmafis(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + unsigned int rw; + u8 dmactl; + u32 tag; + struct nv_swncq_port_priv *pp = ap->private_data; + + __ata_bmdma_stop(ap); + tag = nv_swncq_tag(ap); + + DPRINTK("dma setup tag 0x%x\n", tag); + qc = ata_qc_from_tag(ap, tag); + + if (unlikely(!qc)) + return; + + rw = qc->tf.flags & ATA_TFLAG_WRITE; + + /* load PRD table addr. */ + iowrite32(pp->prd_dma + ATA_PRD_TBL_SZ * qc->tag, + ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); + + /* specify data direction, triple-check start bit is clear */ + dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + dmactl &= ~ATA_DMA_WR; + if (!rw) + dmactl |= ATA_DMA_WR; + + iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); +} + +static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis) +{ + struct nv_swncq_port_priv *pp = ap->private_data; + struct ata_queued_cmd *qc; + struct ata_eh_info *ehi = &ap->link.eh_info; + u32 serror; + u8 ata_stat; + + ata_stat = ap->ops->sff_check_status(ap); + nv_swncq_irq_clear(ap, fis); + if (!fis) + return; + + if (ap->pflags & ATA_PFLAG_FROZEN) + return; + + if (fis & NV_SWNCQ_IRQ_HOTPLUG) { + nv_swncq_hotplug(ap, fis); + return; + } + + if (!pp->qc_active) + return; + + if (ap->ops->scr_read(&ap->link, SCR_ERROR, &serror)) + return; + ap->ops->scr_write(&ap->link, SCR_ERROR, serror); + + if (ata_stat & ATA_ERR) { + ata_ehi_clear_desc(ehi); + ata_ehi_push_desc(ehi, "Ata error. fis:0x%X", fis); + ehi->err_mask |= AC_ERR_DEV; + ehi->serror |= serror; + ehi->action |= ATA_EH_RESET; + ata_port_freeze(ap); + return; + } + + if (fis & NV_SWNCQ_IRQ_BACKOUT) { + /* If the IRQ is backout, driver must issue + * the new command again some time later. + */ + pp->ncq_flags |= ncq_saw_backout; + } + + if (fis & NV_SWNCQ_IRQ_SDBFIS) { + pp->ncq_flags |= ncq_saw_sdb; + DPRINTK("id 0x%x SWNCQ: qc_active 0x%X " + "dhfis 0x%X dmafis 0x%X sactive 0x%X\n", + ap->print_id, pp->qc_active, pp->dhfis_bits, + pp->dmafis_bits, readl(pp->sactive_block)); + if (nv_swncq_sdbfis(ap) < 0) + goto irq_error; + } + + if (fis & NV_SWNCQ_IRQ_DHREGFIS) { + /* The interrupt indicates the new command + * was transmitted correctly to the drive. + */ + pp->dhfis_bits |= (0x1 << pp->last_issue_tag); + pp->ncq_flags |= ncq_saw_d2h; + if (pp->ncq_flags & (ncq_saw_sdb | ncq_saw_backout)) { + ata_ehi_push_desc(ehi, "illegal fis transaction"); + ehi->err_mask |= AC_ERR_HSM; + ehi->action |= ATA_EH_RESET; + goto irq_error; + } + + if (!(fis & NV_SWNCQ_IRQ_DMASETUP) && + !(pp->ncq_flags & ncq_saw_dmas)) { + ata_stat = ap->ops->sff_check_status(ap); + if (ata_stat & ATA_BUSY) + goto irq_exit; + + if (pp->defer_queue.defer_bits) { + DPRINTK("send next command\n"); + qc = nv_swncq_qc_from_dq(ap); + nv_swncq_issue_atacmd(ap, qc); + } + } + } + + if (fis & NV_SWNCQ_IRQ_DMASETUP) { + /* program the dma controller with appropriate PRD buffers + * and start the DMA transfer for requested command. + */ + pp->dmafis_bits |= (0x1 << nv_swncq_tag(ap)); + pp->ncq_flags |= ncq_saw_dmas; + nv_swncq_dmafis(ap); + } + +irq_exit: + return; +irq_error: + ata_ehi_push_desc(ehi, "fis:0x%x", fis); + ata_port_freeze(ap); + return; +} + +static irqreturn_t nv_swncq_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + unsigned int i; + unsigned int handled = 0; + unsigned long flags; + u32 irq_stat; + + spin_lock_irqsave(&host->lock, flags); + + irq_stat = readl(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_MCP55); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + if (ap->link.sactive) { + nv_swncq_host_interrupt(ap, (u16)irq_stat); + handled = 1; + } else { + if (irq_stat) /* reserve Hotplug */ + nv_swncq_irq_clear(ap, 0xfff0); + + handled += nv_host_intr(ap, (u8)irq_stat); + } + irq_stat >>= NV_INT_PORT_SHIFT_MCP55; + } + + spin_unlock_irqrestore(&host->lock, flags); + + return IRQ_RETVAL(handled); +} + +static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + const struct ata_port_info *ppi[] = { NULL, NULL }; + struct nv_pi_priv *ipriv; + struct ata_host *host; + struct nv_host_priv *hpriv; + int rc; + u32 bar; + void __iomem *base; + unsigned long type = ent->driver_data; + + // Make sure this is a SATA controller by counting the number of bars + // (NVIDIA SATA controllers will always have six bars). Otherwise, + // it's an IDE controller and we ignore it. + for (bar = 0; bar < 6; bar++) + if (pci_resource_start(pdev, bar) == 0) + return -ENODEV; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* determine type and allocate host */ + if (type == CK804 && adma_enabled) { + dev_notice(&pdev->dev, "Using ADMA mode\n"); + type = ADMA; + } else if (type == MCP5x && swncq_enabled) { + dev_notice(&pdev->dev, "Using SWNCQ mode\n"); + type = SWNCQ; + } + + ppi[0] = &nv_port_info[type]; + ipriv = ppi[0]->private_data; + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); + if (rc) + return rc; + + hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + hpriv->type = type; + host->private_data = hpriv; + + /* request and iomap NV_MMIO_BAR */ + rc = pcim_iomap_regions(pdev, 1 << NV_MMIO_BAR, DRV_NAME); + if (rc) + return rc; + + /* configure SCR access */ + base = host->iomap[NV_MMIO_BAR]; + host->ports[0]->ioaddr.scr_addr = base + NV_PORT0_SCR_REG_OFFSET; + host->ports[1]->ioaddr.scr_addr = base + NV_PORT1_SCR_REG_OFFSET; + + /* enable SATA space for CK804 */ + if (type >= CK804) { + u8 regval; + + pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); + regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN; + pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); + } + + /* init ADMA */ + if (type == ADMA) { + rc = nv_adma_host_init(host); + if (rc) + return rc; + } else if (type == SWNCQ) + nv_swncq_host_init(host); + + if (msi_enabled) { + dev_notice(&pdev->dev, "Using MSI\n"); + pci_enable_msi(pdev); + } + + pci_set_master(pdev); + return ata_pci_sff_activate_host(host, ipriv->irq_handler, ipriv->sht); +} + +#ifdef CONFIG_PM_SLEEP +static int nv_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + struct nv_host_priv *hpriv = host->private_data; + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { + if (hpriv->type >= CK804) { + u8 regval; + + pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); + regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN; + pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); + } + if (hpriv->type == ADMA) { + u32 tmp32; + struct nv_adma_port_priv *pp; + /* enable/disable ADMA on the ports appropriately */ + pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32); + + pp = host->ports[0]->private_data; + if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) + tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN | + NV_MCP_SATA_CFG_20_PORT0_PWB_EN); + else + tmp32 |= (NV_MCP_SATA_CFG_20_PORT0_EN | + NV_MCP_SATA_CFG_20_PORT0_PWB_EN); + pp = host->ports[1]->private_data; + if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) + tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT1_EN | + NV_MCP_SATA_CFG_20_PORT1_PWB_EN); + else + tmp32 |= (NV_MCP_SATA_CFG_20_PORT1_EN | + NV_MCP_SATA_CFG_20_PORT1_PWB_EN); + + pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32); + } + } + + ata_host_resume(host); + + return 0; +} +#endif + +static void nv_ck804_host_stop(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + u8 regval; + + /* disable SATA space for CK804 */ + pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); + regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN; + pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); +} + +static void nv_adma_host_stop(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + u32 tmp32; + + /* disable ADMA on the ports */ + pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32); + tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN | + NV_MCP_SATA_CFG_20_PORT0_PWB_EN | + NV_MCP_SATA_CFG_20_PORT1_EN | + NV_MCP_SATA_CFG_20_PORT1_PWB_EN); + + pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32); + + nv_ck804_host_stop(host); +} + +module_pci_driver(nv_pci_driver); + +module_param_named(adma, adma_enabled, bool, 0444); +MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)"); +module_param_named(swncq, swncq_enabled, bool, 0444); +MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)"); +module_param_named(msi, msi_enabled, bool, 0444); +MODULE_PARM_DESC(msi, "Enable use of MSI (Default: false)"); diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c new file mode 100644 index 000000000..0fa211e28 --- /dev/null +++ b/drivers/ata/sata_promise.c @@ -0,0 +1,1268 @@ +/* + * sata_promise.c - Promise SATA + * + * Maintained by: Tejun Heo + * Mikael Pettersson + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2004 Red Hat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware information only available under NDA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sata_promise.h" + +#define DRV_NAME "sata_promise" +#define DRV_VERSION "2.12" + +enum { + PDC_MAX_PORTS = 4, + PDC_MMIO_BAR = 3, + PDC_MAX_PRD = LIBATA_MAX_PRD - 1, /* -1 for ASIC PRD bug workaround */ + + /* host register offsets (from host->iomap[PDC_MMIO_BAR]) */ + PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */ + PDC_FLASH_CTL = 0x44, /* Flash control register */ + PDC_PCI_CTL = 0x48, /* PCI control/status reg */ + PDC_SATA_PLUG_CSR = 0x6C, /* SATA Plug control/status reg */ + PDC2_SATA_PLUG_CSR = 0x60, /* SATAII Plug control/status reg */ + PDC_TBG_MODE = 0x41C, /* TBG mode (not SATAII) */ + PDC_SLEW_CTL = 0x470, /* slew rate control reg (not SATAII) */ + + /* per-port ATA register offsets (from ap->ioaddr.cmd_addr) */ + PDC_FEATURE = 0x04, /* Feature/Error reg (per port) */ + PDC_SECTOR_COUNT = 0x08, /* Sector count reg (per port) */ + PDC_SECTOR_NUMBER = 0x0C, /* Sector number reg (per port) */ + PDC_CYLINDER_LOW = 0x10, /* Cylinder low reg (per port) */ + PDC_CYLINDER_HIGH = 0x14, /* Cylinder high reg (per port) */ + PDC_DEVICE = 0x18, /* Device/Head reg (per port) */ + PDC_COMMAND = 0x1C, /* Command/status reg (per port) */ + PDC_ALTSTATUS = 0x38, /* Alternate-status/device-control reg (per port) */ + PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */ + PDC_GLOBAL_CTL = 0x48, /* Global control/status (per port) */ + PDC_CTLSTAT = 0x60, /* IDE control and status (per port) */ + + /* per-port SATA register offsets (from ap->ioaddr.scr_addr) */ + PDC_SATA_ERROR = 0x04, + PDC_PHYMODE4 = 0x14, + PDC_LINK_LAYER_ERRORS = 0x6C, + PDC_FPDMA_CTLSTAT = 0xD8, + PDC_INTERNAL_DEBUG_1 = 0xF8, /* also used for PATA */ + PDC_INTERNAL_DEBUG_2 = 0xFC, /* also used for PATA */ + + /* PDC_FPDMA_CTLSTAT bit definitions */ + PDC_FPDMA_CTLSTAT_RESET = 1 << 3, + PDC_FPDMA_CTLSTAT_DMASETUP_INT_FLAG = 1 << 10, + PDC_FPDMA_CTLSTAT_SETDB_INT_FLAG = 1 << 11, + + /* PDC_GLOBAL_CTL bit definitions */ + PDC_PH_ERR = (1 << 8), /* PCI error while loading packet */ + PDC_SH_ERR = (1 << 9), /* PCI error while loading S/G table */ + PDC_DH_ERR = (1 << 10), /* PCI error while loading data */ + PDC2_HTO_ERR = (1 << 12), /* host bus timeout */ + PDC2_ATA_HBA_ERR = (1 << 13), /* error during SATA DATA FIS transmission */ + PDC2_ATA_DMA_CNT_ERR = (1 << 14), /* DMA DATA FIS size differs from S/G count */ + PDC_OVERRUN_ERR = (1 << 19), /* S/G byte count larger than HD requires */ + PDC_UNDERRUN_ERR = (1 << 20), /* S/G byte count less than HD requires */ + PDC_DRIVE_ERR = (1 << 21), /* drive error */ + PDC_PCI_SYS_ERR = (1 << 22), /* PCI system error */ + PDC1_PCI_PARITY_ERR = (1 << 23), /* PCI parity error (from SATA150 driver) */ + PDC1_ERR_MASK = PDC1_PCI_PARITY_ERR, + PDC2_ERR_MASK = PDC2_HTO_ERR | PDC2_ATA_HBA_ERR | + PDC2_ATA_DMA_CNT_ERR, + PDC_ERR_MASK = PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR | + PDC_OVERRUN_ERR | PDC_UNDERRUN_ERR | + PDC_DRIVE_ERR | PDC_PCI_SYS_ERR | + PDC1_ERR_MASK | PDC2_ERR_MASK, + + board_2037x = 0, /* FastTrak S150 TX2plus */ + board_2037x_pata = 1, /* FastTrak S150 TX2plus PATA port */ + board_20319 = 2, /* FastTrak S150 TX4 */ + board_20619 = 3, /* FastTrak TX4000 */ + board_2057x = 4, /* SATAII150 Tx2plus */ + board_2057x_pata = 5, /* SATAII150 Tx2plus PATA port */ + board_40518 = 6, /* SATAII150 Tx4 */ + + PDC_HAS_PATA = (1 << 1), /* PDC20375/20575 has PATA */ + + /* Sequence counter control registers bit definitions */ + PDC_SEQCNTRL_INT_MASK = (1 << 5), /* Sequence Interrupt Mask */ + + /* Feature register values */ + PDC_FEATURE_ATAPI_PIO = 0x00, /* ATAPI data xfer by PIO */ + PDC_FEATURE_ATAPI_DMA = 0x01, /* ATAPI data xfer by DMA */ + + /* Device/Head register values */ + PDC_DEVICE_SATA = 0xE0, /* Device/Head value for SATA devices */ + + /* PDC_CTLSTAT bit definitions */ + PDC_DMA_ENABLE = (1 << 7), + PDC_IRQ_DISABLE = (1 << 10), + PDC_RESET = (1 << 11), /* HDMA reset */ + + PDC_COMMON_FLAGS = ATA_FLAG_PIO_POLLING, + + /* ap->flags bits */ + PDC_FLAG_GEN_II = (1 << 24), + PDC_FLAG_SATA_PATA = (1 << 25), /* supports SATA + PATA */ + PDC_FLAG_4_PORTS = (1 << 26), /* 4 ports */ +}; + +struct pdc_port_priv { + u8 *pkt; + dma_addr_t pkt_dma; +}; + +struct pdc_host_priv { + spinlock_t hard_reset_lock; +}; + +static int pdc_sata_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); +static int pdc_sata_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static int pdc_ata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static int pdc_common_port_start(struct ata_port *ap); +static int pdc_sata_port_start(struct ata_port *ap); +static void pdc_qc_prep(struct ata_queued_cmd *qc); +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); +static int pdc_check_atapi_dma(struct ata_queued_cmd *qc); +static int pdc_old_sata_check_atapi_dma(struct ata_queued_cmd *qc); +static void pdc_irq_clear(struct ata_port *ap); +static unsigned int pdc_qc_issue(struct ata_queued_cmd *qc); +static void pdc_freeze(struct ata_port *ap); +static void pdc_sata_freeze(struct ata_port *ap); +static void pdc_thaw(struct ata_port *ap); +static void pdc_sata_thaw(struct ata_port *ap); +static int pdc_pata_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static void pdc_error_handler(struct ata_port *ap); +static void pdc_post_internal_cmd(struct ata_queued_cmd *qc); +static int pdc_pata_cable_detect(struct ata_port *ap); +static int pdc_sata_cable_detect(struct ata_port *ap); + +static struct scsi_host_template pdc_ata_sht = { + ATA_BASE_SHT(DRV_NAME), + .sg_tablesize = PDC_MAX_PRD, + .dma_boundary = ATA_DMA_BOUNDARY, +}; + +static const struct ata_port_operations pdc_common_ops = { + .inherits = &ata_sff_port_ops, + + .sff_tf_load = pdc_tf_load_mmio, + .sff_exec_command = pdc_exec_command_mmio, + .check_atapi_dma = pdc_check_atapi_dma, + .qc_prep = pdc_qc_prep, + .qc_issue = pdc_qc_issue, + + .sff_irq_clear = pdc_irq_clear, + .lost_interrupt = ATA_OP_NULL, + + .post_internal_cmd = pdc_post_internal_cmd, + .error_handler = pdc_error_handler, +}; + +static struct ata_port_operations pdc_sata_ops = { + .inherits = &pdc_common_ops, + .cable_detect = pdc_sata_cable_detect, + .freeze = pdc_sata_freeze, + .thaw = pdc_sata_thaw, + .scr_read = pdc_sata_scr_read, + .scr_write = pdc_sata_scr_write, + .port_start = pdc_sata_port_start, + .hardreset = pdc_sata_hardreset, +}; + +/* First-generation chips need a more restrictive ->check_atapi_dma op, + and ->freeze/thaw that ignore the hotplug controls. */ +static struct ata_port_operations pdc_old_sata_ops = { + .inherits = &pdc_sata_ops, + .freeze = pdc_freeze, + .thaw = pdc_thaw, + .check_atapi_dma = pdc_old_sata_check_atapi_dma, +}; + +static struct ata_port_operations pdc_pata_ops = { + .inherits = &pdc_common_ops, + .cable_detect = pdc_pata_cable_detect, + .freeze = pdc_freeze, + .thaw = pdc_thaw, + .port_start = pdc_common_port_start, + .softreset = pdc_pata_softreset, +}; + +static const struct ata_port_info pdc_port_info[] = { + [board_2037x] = + { + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | + PDC_FLAG_SATA_PATA, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &pdc_old_sata_ops, + }, + + [board_2037x_pata] = + { + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &pdc_pata_ops, + }, + + [board_20319] = + { + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | + PDC_FLAG_4_PORTS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &pdc_old_sata_ops, + }, + + [board_20619] = + { + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS | + PDC_FLAG_4_PORTS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &pdc_pata_ops, + }, + + [board_2057x] = + { + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | + PDC_FLAG_GEN_II | PDC_FLAG_SATA_PATA, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &pdc_sata_ops, + }, + + [board_2057x_pata] = + { + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS | + PDC_FLAG_GEN_II, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &pdc_pata_ops, + }, + + [board_40518] = + { + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | + PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &pdc_sata_ops, + }, +}; + +static const struct pci_device_id pdc_ata_pci_tbl[] = { + { PCI_VDEVICE(PROMISE, 0x3371), board_2037x }, + { PCI_VDEVICE(PROMISE, 0x3373), board_2037x }, + { PCI_VDEVICE(PROMISE, 0x3375), board_2037x }, + { PCI_VDEVICE(PROMISE, 0x3376), board_2037x }, + { PCI_VDEVICE(PROMISE, 0x3570), board_2057x }, + { PCI_VDEVICE(PROMISE, 0x3571), board_2057x }, + { PCI_VDEVICE(PROMISE, 0x3574), board_2057x }, + { PCI_VDEVICE(PROMISE, 0x3577), board_2057x }, + { PCI_VDEVICE(PROMISE, 0x3d73), board_2057x }, + { PCI_VDEVICE(PROMISE, 0x3d75), board_2057x }, + + { PCI_VDEVICE(PROMISE, 0x3318), board_20319 }, + { PCI_VDEVICE(PROMISE, 0x3319), board_20319 }, + { PCI_VDEVICE(PROMISE, 0x3515), board_40518 }, + { PCI_VDEVICE(PROMISE, 0x3519), board_40518 }, + { PCI_VDEVICE(PROMISE, 0x3d17), board_40518 }, + { PCI_VDEVICE(PROMISE, 0x3d18), board_40518 }, + + { PCI_VDEVICE(PROMISE, 0x6629), board_20619 }, + + { } /* terminate list */ +}; + +static struct pci_driver pdc_ata_pci_driver = { + .name = DRV_NAME, + .id_table = pdc_ata_pci_tbl, + .probe = pdc_ata_init_one, + .remove = ata_pci_remove_one, +}; + +static int pdc_common_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct pdc_port_priv *pp; + int rc; + + /* we use the same prd table as bmdma, allocate it */ + rc = ata_bmdma_port_start(ap); + if (rc) + return rc; + + pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + + pp->pkt = dmam_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL); + if (!pp->pkt) + return -ENOMEM; + + ap->private_data = pp; + + return 0; +} + +static int pdc_sata_port_start(struct ata_port *ap) +{ + int rc; + + rc = pdc_common_port_start(ap); + if (rc) + return rc; + + /* fix up PHYMODE4 align timing */ + if (ap->flags & PDC_FLAG_GEN_II) { + void __iomem *sata_mmio = ap->ioaddr.scr_addr; + unsigned int tmp; + + tmp = readl(sata_mmio + PDC_PHYMODE4); + tmp = (tmp & ~3) | 1; /* set bits 1:0 = 0:1 */ + writel(tmp, sata_mmio + PDC_PHYMODE4); + } + + return 0; +} + +static void pdc_fpdma_clear_interrupt_flag(struct ata_port *ap) +{ + void __iomem *sata_mmio = ap->ioaddr.scr_addr; + u32 tmp; + + tmp = readl(sata_mmio + PDC_FPDMA_CTLSTAT); + tmp |= PDC_FPDMA_CTLSTAT_DMASETUP_INT_FLAG; + tmp |= PDC_FPDMA_CTLSTAT_SETDB_INT_FLAG; + + /* It's not allowed to write to the entire FPDMA_CTLSTAT register + when NCQ is running. So do a byte-sized write to bits 10 and 11. */ + writeb(tmp >> 8, sata_mmio + PDC_FPDMA_CTLSTAT + 1); + readb(sata_mmio + PDC_FPDMA_CTLSTAT + 1); /* flush */ +} + +static void pdc_fpdma_reset(struct ata_port *ap) +{ + void __iomem *sata_mmio = ap->ioaddr.scr_addr; + u8 tmp; + + tmp = (u8)readl(sata_mmio + PDC_FPDMA_CTLSTAT); + tmp &= 0x7F; + tmp |= PDC_FPDMA_CTLSTAT_RESET; + writeb(tmp, sata_mmio + PDC_FPDMA_CTLSTAT); + readl(sata_mmio + PDC_FPDMA_CTLSTAT); /* flush */ + udelay(100); + tmp &= ~PDC_FPDMA_CTLSTAT_RESET; + writeb(tmp, sata_mmio + PDC_FPDMA_CTLSTAT); + readl(sata_mmio + PDC_FPDMA_CTLSTAT); /* flush */ + + pdc_fpdma_clear_interrupt_flag(ap); +} + +static void pdc_not_at_command_packet_phase(struct ata_port *ap) +{ + void __iomem *sata_mmio = ap->ioaddr.scr_addr; + unsigned int i; + u32 tmp; + + /* check not at ASIC packet command phase */ + for (i = 0; i < 100; ++i) { + writel(0, sata_mmio + PDC_INTERNAL_DEBUG_1); + tmp = readl(sata_mmio + PDC_INTERNAL_DEBUG_2); + if ((tmp & 0xF) != 1) + break; + udelay(100); + } +} + +static void pdc_clear_internal_debug_record_error_register(struct ata_port *ap) +{ + void __iomem *sata_mmio = ap->ioaddr.scr_addr; + + writel(0xffffffff, sata_mmio + PDC_SATA_ERROR); + writel(0xffff0000, sata_mmio + PDC_LINK_LAYER_ERRORS); +} + +static void pdc_reset_port(struct ata_port *ap) +{ + void __iomem *ata_ctlstat_mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT; + unsigned int i; + u32 tmp; + + if (ap->flags & PDC_FLAG_GEN_II) + pdc_not_at_command_packet_phase(ap); + + tmp = readl(ata_ctlstat_mmio); + tmp |= PDC_RESET; + writel(tmp, ata_ctlstat_mmio); + + for (i = 11; i > 0; i--) { + tmp = readl(ata_ctlstat_mmio); + if (tmp & PDC_RESET) + break; + + udelay(100); + + tmp |= PDC_RESET; + writel(tmp, ata_ctlstat_mmio); + } + + tmp &= ~PDC_RESET; + writel(tmp, ata_ctlstat_mmio); + readl(ata_ctlstat_mmio); /* flush */ + + if (sata_scr_valid(&ap->link) && (ap->flags & PDC_FLAG_GEN_II)) { + pdc_fpdma_reset(ap); + pdc_clear_internal_debug_record_error_register(ap); + } +} + +static int pdc_pata_cable_detect(struct ata_port *ap) +{ + u8 tmp; + void __iomem *ata_mmio = ap->ioaddr.cmd_addr; + + tmp = readb(ata_mmio + PDC_CTLSTAT + 3); + if (tmp & 0x01) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + +static int pdc_sata_cable_detect(struct ata_port *ap) +{ + return ATA_CBL_SATA; +} + +static int pdc_sata_scr_read(struct ata_link *link, + unsigned int sc_reg, u32 *val) +{ + if (sc_reg > SCR_CONTROL) + return -EINVAL; + *val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 4)); + return 0; +} + +static int pdc_sata_scr_write(struct ata_link *link, + unsigned int sc_reg, u32 val) +{ + if (sc_reg > SCR_CONTROL) + return -EINVAL; + writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 4)); + return 0; +} + +static void pdc_atapi_pkt(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + dma_addr_t sg_table = ap->bmdma_prd_dma; + unsigned int cdb_len = qc->dev->cdb_len; + u8 *cdb = qc->cdb; + struct pdc_port_priv *pp = ap->private_data; + u8 *buf = pp->pkt; + __le32 *buf32 = (__le32 *) buf; + unsigned int dev_sel, feature; + + /* set control bits (byte 0), zero delay seq id (byte 3), + * and seq id (byte 2) + */ + switch (qc->tf.protocol) { + case ATAPI_PROT_DMA: + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) + buf32[0] = cpu_to_le32(PDC_PKT_READ); + else + buf32[0] = 0; + break; + case ATAPI_PROT_NODATA: + buf32[0] = cpu_to_le32(PDC_PKT_NODATA); + break; + default: + BUG(); + break; + } + buf32[1] = cpu_to_le32(sg_table); /* S/G table addr */ + buf32[2] = 0; /* no next-packet */ + + /* select drive */ + if (sata_scr_valid(&ap->link)) + dev_sel = PDC_DEVICE_SATA; + else + dev_sel = qc->tf.device; + + buf[12] = (1 << 5) | ATA_REG_DEVICE; + buf[13] = dev_sel; + buf[14] = (1 << 5) | ATA_REG_DEVICE | PDC_PKT_CLEAR_BSY; + buf[15] = dev_sel; /* once more, waiting for BSY to clear */ + + buf[16] = (1 << 5) | ATA_REG_NSECT; + buf[17] = qc->tf.nsect; + buf[18] = (1 << 5) | ATA_REG_LBAL; + buf[19] = qc->tf.lbal; + + /* set feature and byte counter registers */ + if (qc->tf.protocol != ATAPI_PROT_DMA) + feature = PDC_FEATURE_ATAPI_PIO; + else + feature = PDC_FEATURE_ATAPI_DMA; + + buf[20] = (1 << 5) | ATA_REG_FEATURE; + buf[21] = feature; + buf[22] = (1 << 5) | ATA_REG_BYTEL; + buf[23] = qc->tf.lbam; + buf[24] = (1 << 5) | ATA_REG_BYTEH; + buf[25] = qc->tf.lbah; + + /* send ATAPI packet command 0xA0 */ + buf[26] = (1 << 5) | ATA_REG_CMD; + buf[27] = qc->tf.command; + + /* select drive and check DRQ */ + buf[28] = (1 << 5) | ATA_REG_DEVICE | PDC_PKT_WAIT_DRDY; + buf[29] = dev_sel; + + /* we can represent cdb lengths 2/4/6/8/10/12/14/16 */ + BUG_ON(cdb_len & ~0x1E); + + /* append the CDB as the final part */ + buf[30] = (((cdb_len >> 1) & 7) << 5) | ATA_REG_DATA | PDC_LAST_REG; + memcpy(buf+31, cdb, cdb_len); +} + +/** + * pdc_fill_sg - Fill PCI IDE PRD table + * @qc: Metadata associated with taskfile to be transferred + * + * Fill PCI IDE PRD (scatter-gather) table with segments + * associated with the current disk command. + * Make sure hardware does not choke on it. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + */ +static void pdc_fill_sg(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_bmdma_prd *prd = ap->bmdma_prd; + struct scatterlist *sg; + const u32 SG_COUNT_ASIC_BUG = 41*4; + unsigned int si, idx; + u32 len; + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + idx = 0; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + u32 addr, offset; + u32 sg_len; + + /* determine if physical DMA addr spans 64K boundary. + * Note h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + addr = (u32) sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + while (sg_len) { + offset = addr & 0xffff; + len = sg_len; + if ((offset + sg_len) > 0x10000) + len = 0x10000 - offset; + + prd[idx].addr = cpu_to_le32(addr); + prd[idx].flags_len = cpu_to_le32(len & 0xffff); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); + + idx++; + sg_len -= len; + addr += len; + } + } + + len = le32_to_cpu(prd[idx - 1].flags_len); + + if (len > SG_COUNT_ASIC_BUG) { + u32 addr; + + VPRINTK("Splitting last PRD.\n"); + + addr = le32_to_cpu(prd[idx - 1].addr); + prd[idx - 1].flags_len = cpu_to_le32(len - SG_COUNT_ASIC_BUG); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx - 1, addr, SG_COUNT_ASIC_BUG); + + addr = addr + len - SG_COUNT_ASIC_BUG; + len = SG_COUNT_ASIC_BUG; + prd[idx].addr = cpu_to_le32(addr); + prd[idx].flags_len = cpu_to_le32(len); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); + + idx++; + } + + prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); +} + +static void pdc_qc_prep(struct ata_queued_cmd *qc) +{ + struct pdc_port_priv *pp = qc->ap->private_data; + unsigned int i; + + VPRINTK("ENTER\n"); + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + pdc_fill_sg(qc); + /*FALLTHROUGH*/ + case ATA_PROT_NODATA: + i = pdc_pkt_header(&qc->tf, qc->ap->bmdma_prd_dma, + qc->dev->devno, pp->pkt); + if (qc->tf.flags & ATA_TFLAG_LBA48) + i = pdc_prep_lba48(&qc->tf, pp->pkt, i); + else + i = pdc_prep_lba28(&qc->tf, pp->pkt, i); + pdc_pkt_footer(&qc->tf, pp->pkt, i); + break; + case ATAPI_PROT_PIO: + pdc_fill_sg(qc); + break; + case ATAPI_PROT_DMA: + pdc_fill_sg(qc); + /*FALLTHROUGH*/ + case ATAPI_PROT_NODATA: + pdc_atapi_pkt(qc); + break; + default: + break; + } +} + +static int pdc_is_sataii_tx4(unsigned long flags) +{ + const unsigned long mask = PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS; + return (flags & mask) == mask; +} + +static unsigned int pdc_port_no_to_ata_no(unsigned int port_no, + int is_sataii_tx4) +{ + static const unsigned char sataii_tx4_port_remap[4] = { 3, 1, 0, 2}; + return is_sataii_tx4 ? sataii_tx4_port_remap[port_no] : port_no; +} + +static unsigned int pdc_sata_nr_ports(const struct ata_port *ap) +{ + return (ap->flags & PDC_FLAG_4_PORTS) ? 4 : 2; +} + +static unsigned int pdc_sata_ata_port_to_ata_no(const struct ata_port *ap) +{ + const struct ata_host *host = ap->host; + unsigned int nr_ports = pdc_sata_nr_ports(ap); + unsigned int i; + + for (i = 0; i < nr_ports && host->ports[i] != ap; ++i) + ; + BUG_ON(i >= nr_ports); + return pdc_port_no_to_ata_no(i, pdc_is_sataii_tx4(ap->flags)); +} + +static void pdc_freeze(struct ata_port *ap) +{ + void __iomem *ata_mmio = ap->ioaddr.cmd_addr; + u32 tmp; + + tmp = readl(ata_mmio + PDC_CTLSTAT); + tmp |= PDC_IRQ_DISABLE; + tmp &= ~PDC_DMA_ENABLE; + writel(tmp, ata_mmio + PDC_CTLSTAT); + readl(ata_mmio + PDC_CTLSTAT); /* flush */ +} + +static void pdc_sata_freeze(struct ata_port *ap) +{ + struct ata_host *host = ap->host; + void __iomem *host_mmio = host->iomap[PDC_MMIO_BAR]; + unsigned int hotplug_offset = PDC2_SATA_PLUG_CSR; + unsigned int ata_no = pdc_sata_ata_port_to_ata_no(ap); + u32 hotplug_status; + + /* Disable hotplug events on this port. + * + * Locking: + * 1) hotplug register accesses must be serialised via host->lock + * 2) ap->lock == &ap->host->lock + * 3) ->freeze() and ->thaw() are called with ap->lock held + */ + hotplug_status = readl(host_mmio + hotplug_offset); + hotplug_status |= 0x11 << (ata_no + 16); + writel(hotplug_status, host_mmio + hotplug_offset); + readl(host_mmio + hotplug_offset); /* flush */ + + pdc_freeze(ap); +} + +static void pdc_thaw(struct ata_port *ap) +{ + void __iomem *ata_mmio = ap->ioaddr.cmd_addr; + u32 tmp; + + /* clear IRQ */ + readl(ata_mmio + PDC_COMMAND); + + /* turn IRQ back on */ + tmp = readl(ata_mmio + PDC_CTLSTAT); + tmp &= ~PDC_IRQ_DISABLE; + writel(tmp, ata_mmio + PDC_CTLSTAT); + readl(ata_mmio + PDC_CTLSTAT); /* flush */ +} + +static void pdc_sata_thaw(struct ata_port *ap) +{ + struct ata_host *host = ap->host; + void __iomem *host_mmio = host->iomap[PDC_MMIO_BAR]; + unsigned int hotplug_offset = PDC2_SATA_PLUG_CSR; + unsigned int ata_no = pdc_sata_ata_port_to_ata_no(ap); + u32 hotplug_status; + + pdc_thaw(ap); + + /* Enable hotplug events on this port. + * Locking: see pdc_sata_freeze(). + */ + hotplug_status = readl(host_mmio + hotplug_offset); + hotplug_status |= 0x11 << ata_no; + hotplug_status &= ~(0x11 << (ata_no + 16)); + writel(hotplug_status, host_mmio + hotplug_offset); + readl(host_mmio + hotplug_offset); /* flush */ +} + +static int pdc_pata_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + pdc_reset_port(link->ap); + return ata_sff_softreset(link, class, deadline); +} + +static unsigned int pdc_ata_port_to_ata_no(const struct ata_port *ap) +{ + void __iomem *ata_mmio = ap->ioaddr.cmd_addr; + void __iomem *host_mmio = ap->host->iomap[PDC_MMIO_BAR]; + + /* ata_mmio == host_mmio + 0x200 + ata_no * 0x80 */ + return (ata_mmio - host_mmio - 0x200) / 0x80; +} + +static void pdc_hard_reset_port(struct ata_port *ap) +{ + void __iomem *host_mmio = ap->host->iomap[PDC_MMIO_BAR]; + void __iomem *pcictl_b1_mmio = host_mmio + PDC_PCI_CTL + 1; + unsigned int ata_no = pdc_ata_port_to_ata_no(ap); + struct pdc_host_priv *hpriv = ap->host->private_data; + u8 tmp; + + spin_lock(&hpriv->hard_reset_lock); + + tmp = readb(pcictl_b1_mmio); + tmp &= ~(0x10 << ata_no); + writeb(tmp, pcictl_b1_mmio); + readb(pcictl_b1_mmio); /* flush */ + udelay(100); + tmp |= (0x10 << ata_no); + writeb(tmp, pcictl_b1_mmio); + readb(pcictl_b1_mmio); /* flush */ + + spin_unlock(&hpriv->hard_reset_lock); +} + +static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + if (link->ap->flags & PDC_FLAG_GEN_II) + pdc_not_at_command_packet_phase(link->ap); + /* hotplug IRQs should have been masked by pdc_sata_freeze() */ + pdc_hard_reset_port(link->ap); + pdc_reset_port(link->ap); + + /* sata_promise can't reliably acquire the first D2H Reg FIS + * after hardreset. Do non-waiting hardreset and request + * follow-up SRST. + */ + return sata_std_hardreset(link, class, deadline); +} + +static void pdc_error_handler(struct ata_port *ap) +{ + if (!(ap->pflags & ATA_PFLAG_FROZEN)) + pdc_reset_port(ap); + + ata_sff_error_handler(ap); +} + +static void pdc_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* make DMA engine forget about the failed command */ + if (qc->flags & ATA_QCFLAG_FAILED) + pdc_reset_port(ap); +} + +static void pdc_error_intr(struct ata_port *ap, struct ata_queued_cmd *qc, + u32 port_status, u32 err_mask) +{ + struct ata_eh_info *ehi = &ap->link.eh_info; + unsigned int ac_err_mask = 0; + + ata_ehi_clear_desc(ehi); + ata_ehi_push_desc(ehi, "port_status 0x%08x", port_status); + port_status &= err_mask; + + if (port_status & PDC_DRIVE_ERR) + ac_err_mask |= AC_ERR_DEV; + if (port_status & (PDC_OVERRUN_ERR | PDC_UNDERRUN_ERR)) + ac_err_mask |= AC_ERR_OTHER; + if (port_status & (PDC2_ATA_HBA_ERR | PDC2_ATA_DMA_CNT_ERR)) + ac_err_mask |= AC_ERR_ATA_BUS; + if (port_status & (PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR | PDC2_HTO_ERR + | PDC_PCI_SYS_ERR | PDC1_PCI_PARITY_ERR)) + ac_err_mask |= AC_ERR_HOST_BUS; + + if (sata_scr_valid(&ap->link)) { + u32 serror; + + pdc_sata_scr_read(&ap->link, SCR_ERROR, &serror); + ehi->serror |= serror; + } + + qc->err_mask |= ac_err_mask; + + pdc_reset_port(ap); + + ata_port_abort(ap); +} + +static unsigned int pdc_host_intr(struct ata_port *ap, + struct ata_queued_cmd *qc) +{ + unsigned int handled = 0; + void __iomem *ata_mmio = ap->ioaddr.cmd_addr; + u32 port_status, err_mask; + + err_mask = PDC_ERR_MASK; + if (ap->flags & PDC_FLAG_GEN_II) + err_mask &= ~PDC1_ERR_MASK; + else + err_mask &= ~PDC2_ERR_MASK; + port_status = readl(ata_mmio + PDC_GLOBAL_CTL); + if (unlikely(port_status & err_mask)) { + pdc_error_intr(ap, qc, port_status, err_mask); + return 1; + } + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + case ATA_PROT_NODATA: + case ATAPI_PROT_DMA: + case ATAPI_PROT_NODATA: + qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); + ata_qc_complete(qc); + handled = 1; + break; + default: + ap->stats.idle_irq++; + break; + } + + return handled; +} + +static void pdc_irq_clear(struct ata_port *ap) +{ + void __iomem *ata_mmio = ap->ioaddr.cmd_addr; + + readl(ata_mmio + PDC_COMMAND); +} + +static irqreturn_t pdc_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + struct ata_port *ap; + u32 mask = 0; + unsigned int i, tmp; + unsigned int handled = 0; + void __iomem *host_mmio; + unsigned int hotplug_offset, ata_no; + u32 hotplug_status; + int is_sataii_tx4; + + VPRINTK("ENTER\n"); + + if (!host || !host->iomap[PDC_MMIO_BAR]) { + VPRINTK("QUICK EXIT\n"); + return IRQ_NONE; + } + + host_mmio = host->iomap[PDC_MMIO_BAR]; + + spin_lock(&host->lock); + + /* read and clear hotplug flags for all ports */ + if (host->ports[0]->flags & PDC_FLAG_GEN_II) { + hotplug_offset = PDC2_SATA_PLUG_CSR; + hotplug_status = readl(host_mmio + hotplug_offset); + if (hotplug_status & 0xff) + writel(hotplug_status | 0xff, host_mmio + hotplug_offset); + hotplug_status &= 0xff; /* clear uninteresting bits */ + } else + hotplug_status = 0; + + /* reading should also clear interrupts */ + mask = readl(host_mmio + PDC_INT_SEQMASK); + + if (mask == 0xffffffff && hotplug_status == 0) { + VPRINTK("QUICK EXIT 2\n"); + goto done_irq; + } + + mask &= 0xffff; /* only 16 SEQIDs possible */ + if (mask == 0 && hotplug_status == 0) { + VPRINTK("QUICK EXIT 3\n"); + goto done_irq; + } + + writel(mask, host_mmio + PDC_INT_SEQMASK); + + is_sataii_tx4 = pdc_is_sataii_tx4(host->ports[0]->flags); + + for (i = 0; i < host->n_ports; i++) { + VPRINTK("port %u\n", i); + ap = host->ports[i]; + + /* check for a plug or unplug event */ + ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4); + tmp = hotplug_status & (0x11 << ata_no); + if (tmp) { + struct ata_eh_info *ehi = &ap->link.eh_info; + ata_ehi_clear_desc(ehi); + ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, "hotplug_status %#x", tmp); + ata_port_freeze(ap); + ++handled; + continue; + } + + /* check for a packet interrupt */ + tmp = mask & (1 << (i + 1)); + if (tmp) { + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) + handled += pdc_host_intr(ap, qc); + } + } + + VPRINTK("EXIT\n"); + +done_irq: + spin_unlock(&host->lock); + return IRQ_RETVAL(handled); +} + +static void pdc_packet_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pdc_port_priv *pp = ap->private_data; + void __iomem *host_mmio = ap->host->iomap[PDC_MMIO_BAR]; + void __iomem *ata_mmio = ap->ioaddr.cmd_addr; + unsigned int port_no = ap->port_no; + u8 seq = (u8) (port_no + 1); + + VPRINTK("ENTER, ap %p\n", ap); + + writel(0x00000001, host_mmio + (seq * 4)); + readl(host_mmio + (seq * 4)); /* flush */ + + pp->pkt[2] = seq; + wmb(); /* flush PRD, pkt writes */ + writel(pp->pkt_dma, ata_mmio + PDC_PKT_SUBMIT); + readl(ata_mmio + PDC_PKT_SUBMIT); /* flush */ +} + +static unsigned int pdc_qc_issue(struct ata_queued_cmd *qc) +{ + switch (qc->tf.protocol) { + case ATAPI_PROT_NODATA: + if (qc->dev->flags & ATA_DFLAG_CDB_INTR) + break; + /*FALLTHROUGH*/ + case ATA_PROT_NODATA: + if (qc->tf.flags & ATA_TFLAG_POLLING) + break; + /*FALLTHROUGH*/ + case ATAPI_PROT_DMA: + case ATA_PROT_DMA: + pdc_packet_start(qc); + return 0; + default: + break; + } + return ata_sff_qc_issue(qc); +} + +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA); + ata_sff_tf_load(ap, tf); +} + +static void pdc_exec_command_mmio(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA); + ata_sff_exec_command(ap, tf); +} + +static int pdc_check_atapi_dma(struct ata_queued_cmd *qc) +{ + u8 *scsicmd = qc->scsicmd->cmnd; + int pio = 1; /* atapi dma off by default */ + + /* Whitelist commands that may use DMA. */ + switch (scsicmd[0]) { + case WRITE_12: + case WRITE_10: + case WRITE_6: + case READ_12: + case READ_10: + case READ_6: + case 0xad: /* READ_DVD_STRUCTURE */ + case 0xbe: /* READ_CD */ + pio = 0; + } + /* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */ + if (scsicmd[0] == WRITE_10) { + unsigned int lba = + (scsicmd[2] << 24) | + (scsicmd[3] << 16) | + (scsicmd[4] << 8) | + scsicmd[5]; + if (lba >= 0xFFFF4FA2) + pio = 1; + } + return pio; +} + +static int pdc_old_sata_check_atapi_dma(struct ata_queued_cmd *qc) +{ + /* First generation chips cannot use ATAPI DMA on SATA ports */ + return 1; +} + +static void pdc_ata_setup_port(struct ata_port *ap, + void __iomem *base, void __iomem *scr_addr) +{ + ap->ioaddr.cmd_addr = base; + ap->ioaddr.data_addr = base; + ap->ioaddr.feature_addr = + ap->ioaddr.error_addr = base + 0x4; + ap->ioaddr.nsect_addr = base + 0x8; + ap->ioaddr.lbal_addr = base + 0xc; + ap->ioaddr.lbam_addr = base + 0x10; + ap->ioaddr.lbah_addr = base + 0x14; + ap->ioaddr.device_addr = base + 0x18; + ap->ioaddr.command_addr = + ap->ioaddr.status_addr = base + 0x1c; + ap->ioaddr.altstatus_addr = + ap->ioaddr.ctl_addr = base + 0x38; + ap->ioaddr.scr_addr = scr_addr; +} + +static void pdc_host_init(struct ata_host *host) +{ + void __iomem *host_mmio = host->iomap[PDC_MMIO_BAR]; + int is_gen2 = host->ports[0]->flags & PDC_FLAG_GEN_II; + int hotplug_offset; + u32 tmp; + + if (is_gen2) + hotplug_offset = PDC2_SATA_PLUG_CSR; + else + hotplug_offset = PDC_SATA_PLUG_CSR; + + /* + * Except for the hotplug stuff, this is voodoo from the + * Promise driver. Label this entire section + * "TODO: figure out why we do this" + */ + + /* enable BMR_BURST, maybe change FIFO_SHD to 8 dwords */ + tmp = readl(host_mmio + PDC_FLASH_CTL); + tmp |= 0x02000; /* bit 13 (enable bmr burst) */ + if (!is_gen2) + tmp |= 0x10000; /* bit 16 (fifo threshold at 8 dw) */ + writel(tmp, host_mmio + PDC_FLASH_CTL); + + /* clear plug/unplug flags for all ports */ + tmp = readl(host_mmio + hotplug_offset); + writel(tmp | 0xff, host_mmio + hotplug_offset); + + tmp = readl(host_mmio + hotplug_offset); + if (is_gen2) /* unmask plug/unplug ints */ + writel(tmp & ~0xff0000, host_mmio + hotplug_offset); + else /* mask plug/unplug ints */ + writel(tmp | 0xff0000, host_mmio + hotplug_offset); + + /* don't initialise TBG or SLEW on 2nd generation chips */ + if (is_gen2) + return; + + /* reduce TBG clock to 133 Mhz. */ + tmp = readl(host_mmio + PDC_TBG_MODE); + tmp &= ~0x30000; /* clear bit 17, 16*/ + tmp |= 0x10000; /* set bit 17:16 = 0:1 */ + writel(tmp, host_mmio + PDC_TBG_MODE); + + readl(host_mmio + PDC_TBG_MODE); /* flush */ + msleep(10); + + /* adjust slew rate control register. */ + tmp = readl(host_mmio + PDC_SLEW_CTL); + tmp &= 0xFFFFF03F; /* clear bit 11 ~ 6 */ + tmp |= 0x00000900; /* set bit 11-9 = 100b , bit 8-6 = 100 */ + writel(tmp, host_mmio + PDC_SLEW_CTL); +} + +static int pdc_ata_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + const struct ata_port_info *pi = &pdc_port_info[ent->driver_data]; + const struct ata_port_info *ppi[PDC_MAX_PORTS]; + struct ata_host *host; + struct pdc_host_priv *hpriv; + void __iomem *host_mmio; + int n_ports, i, rc; + int is_sataii_tx4; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* enable and acquire resources */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + host_mmio = pcim_iomap_table(pdev)[PDC_MMIO_BAR]; + + /* determine port configuration and setup host */ + n_ports = 2; + if (pi->flags & PDC_FLAG_4_PORTS) + n_ports = 4; + for (i = 0; i < n_ports; i++) + ppi[i] = pi; + + if (pi->flags & PDC_FLAG_SATA_PATA) { + u8 tmp = readb(host_mmio + PDC_FLASH_CTL + 1); + if (!(tmp & 0x80)) + ppi[n_ports++] = pi + 1; + } + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + if (!host) { + dev_err(&pdev->dev, "failed to allocate host\n"); + return -ENOMEM; + } + hpriv = devm_kzalloc(&pdev->dev, sizeof *hpriv, GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + spin_lock_init(&hpriv->hard_reset_lock); + host->private_data = hpriv; + host->iomap = pcim_iomap_table(pdev); + + is_sataii_tx4 = pdc_is_sataii_tx4(pi->flags); + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + unsigned int ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4); + unsigned int ata_offset = 0x200 + ata_no * 0x80; + unsigned int scr_offset = 0x400 + ata_no * 0x100; + + pdc_ata_setup_port(ap, host_mmio + ata_offset, host_mmio + scr_offset); + + ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, PDC_MMIO_BAR, ata_offset, "ata"); + } + + /* initialize adapter */ + pdc_host_init(host); + + rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + + /* start host, request IRQ and attach */ + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, pdc_interrupt, IRQF_SHARED, + &pdc_ata_sht); +} + +module_pci_driver(pdc_ata_pci_driver); + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("Promise ATA TX2/TX4/TX4000 low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, pdc_ata_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/sata_promise.h b/drivers/ata/sata_promise.h new file mode 100644 index 000000000..00d6000e5 --- /dev/null +++ b/drivers/ata/sata_promise.h @@ -0,0 +1,157 @@ +/* + * sata_promise.h - Promise SATA common definitions and inline funcs + * + * Copyright 2003-2004 Red Hat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + */ + +#ifndef __SATA_PROMISE_H__ +#define __SATA_PROMISE_H__ + +#include + +enum pdc_packet_bits { + PDC_PKT_READ = (1 << 2), + PDC_PKT_NODATA = (1 << 3), + + PDC_PKT_SIZEMASK = (1 << 7) | (1 << 6) | (1 << 5), + PDC_PKT_CLEAR_BSY = (1 << 4), + PDC_PKT_WAIT_DRDY = (1 << 3) | (1 << 4), + PDC_LAST_REG = (1 << 3), + + PDC_REG_DEVCTL = (1 << 3) | (1 << 2) | (1 << 1), +}; + +static inline unsigned int pdc_pkt_header(struct ata_taskfile *tf, + dma_addr_t sg_table, + unsigned int devno, u8 *buf) +{ + u8 dev_reg; + __le32 *buf32 = (__le32 *) buf; + + /* set control bits (byte 0), zero delay seq id (byte 3), + * and seq id (byte 2) + */ + switch (tf->protocol) { + case ATA_PROT_DMA: + if (!(tf->flags & ATA_TFLAG_WRITE)) + buf32[0] = cpu_to_le32(PDC_PKT_READ); + else + buf32[0] = 0; + break; + + case ATA_PROT_NODATA: + buf32[0] = cpu_to_le32(PDC_PKT_NODATA); + break; + + default: + BUG(); + break; + } + + buf32[1] = cpu_to_le32(sg_table); /* S/G table addr */ + buf32[2] = 0; /* no next-packet */ + + if (devno == 0) + dev_reg = ATA_DEVICE_OBS; + else + dev_reg = ATA_DEVICE_OBS | ATA_DEV1; + + /* select device */ + buf[12] = (1 << 5) | PDC_PKT_CLEAR_BSY | ATA_REG_DEVICE; + buf[13] = dev_reg; + + /* device control register */ + buf[14] = (1 << 5) | PDC_REG_DEVCTL; + buf[15] = tf->ctl; + + return 16; /* offset of next byte */ +} + +static inline unsigned int pdc_pkt_footer(struct ata_taskfile *tf, u8 *buf, + unsigned int i) +{ + if (tf->flags & ATA_TFLAG_DEVICE) { + buf[i++] = (1 << 5) | ATA_REG_DEVICE; + buf[i++] = tf->device; + } + + /* and finally the command itself; also includes end-of-pkt marker */ + buf[i++] = (1 << 5) | PDC_LAST_REG | ATA_REG_CMD; + buf[i++] = tf->command; + + return i; +} + +static inline unsigned int pdc_prep_lba28(struct ata_taskfile *tf, u8 *buf, unsigned int i) +{ + /* the "(1 << 5)" should be read "(count << 5)" */ + + /* ATA command block registers */ + buf[i++] = (1 << 5) | ATA_REG_FEATURE; + buf[i++] = tf->feature; + + buf[i++] = (1 << 5) | ATA_REG_NSECT; + buf[i++] = tf->nsect; + + buf[i++] = (1 << 5) | ATA_REG_LBAL; + buf[i++] = tf->lbal; + + buf[i++] = (1 << 5) | ATA_REG_LBAM; + buf[i++] = tf->lbam; + + buf[i++] = (1 << 5) | ATA_REG_LBAH; + buf[i++] = tf->lbah; + + return i; +} + +static inline unsigned int pdc_prep_lba48(struct ata_taskfile *tf, u8 *buf, unsigned int i) +{ + /* the "(2 << 5)" should be read "(count << 5)" */ + + /* ATA command block registers */ + buf[i++] = (2 << 5) | ATA_REG_FEATURE; + buf[i++] = tf->hob_feature; + buf[i++] = tf->feature; + + buf[i++] = (2 << 5) | ATA_REG_NSECT; + buf[i++] = tf->hob_nsect; + buf[i++] = tf->nsect; + + buf[i++] = (2 << 5) | ATA_REG_LBAL; + buf[i++] = tf->hob_lbal; + buf[i++] = tf->lbal; + + buf[i++] = (2 << 5) | ATA_REG_LBAM; + buf[i++] = tf->hob_lbam; + buf[i++] = tf->lbam; + + buf[i++] = (2 << 5) | ATA_REG_LBAH; + buf[i++] = tf->hob_lbah; + buf[i++] = tf->lbah; + + return i; +} + + +#endif /* __SATA_PROMISE_H__ */ diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c new file mode 100644 index 000000000..af987a4f3 --- /dev/null +++ b/drivers/ata/sata_qstor.c @@ -0,0 +1,643 @@ +/* + * sata_qstor.c - Pacific Digital Corporation QStor SATA + * + * Maintained by: Mark Lord + * + * Copyright 2005 Pacific Digital Corporation. + * (OSL/GPL code release authorized by Jalil Fadavi). + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_qstor" +#define DRV_VERSION "0.09" + +enum { + QS_MMIO_BAR = 4, + + QS_PORTS = 4, + QS_MAX_PRD = LIBATA_MAX_PRD, + QS_CPB_ORDER = 6, + QS_CPB_BYTES = (1 << QS_CPB_ORDER), + QS_PRD_BYTES = QS_MAX_PRD * 16, + QS_PKT_BYTES = QS_CPB_BYTES + QS_PRD_BYTES, + + /* global register offsets */ + QS_HCF_CNFG3 = 0x0003, /* host configuration offset */ + QS_HID_HPHY = 0x0004, /* host physical interface info */ + QS_HCT_CTRL = 0x00e4, /* global interrupt mask offset */ + QS_HST_SFF = 0x0100, /* host status fifo offset */ + QS_HVS_SERD3 = 0x0393, /* PHY enable offset */ + + /* global control bits */ + QS_HPHY_64BIT = (1 << 1), /* 64-bit bus detected */ + QS_CNFG3_GSRST = 0x01, /* global chip reset */ + QS_SERD3_PHY_ENA = 0xf0, /* PHY detection ENAble*/ + + /* per-channel register offsets */ + QS_CCF_CPBA = 0x0710, /* chan CPB base address */ + QS_CCF_CSEP = 0x0718, /* chan CPB separation factor */ + QS_CFC_HUFT = 0x0800, /* host upstream fifo threshold */ + QS_CFC_HDFT = 0x0804, /* host downstream fifo threshold */ + QS_CFC_DUFT = 0x0808, /* dev upstream fifo threshold */ + QS_CFC_DDFT = 0x080c, /* dev downstream fifo threshold */ + QS_CCT_CTR0 = 0x0900, /* chan control-0 offset */ + QS_CCT_CTR1 = 0x0901, /* chan control-1 offset */ + QS_CCT_CFF = 0x0a00, /* chan command fifo offset */ + + /* channel control bits */ + QS_CTR0_REG = (1 << 1), /* register mode (vs. pkt mode) */ + QS_CTR0_CLER = (1 << 2), /* clear channel errors */ + QS_CTR1_RDEV = (1 << 1), /* sata phy/comms reset */ + QS_CTR1_RCHN = (1 << 4), /* reset channel logic */ + QS_CCF_RUN_PKT = 0x107, /* RUN a new dma PKT */ + + /* pkt sub-field headers */ + QS_HCB_HDR = 0x01, /* Host Control Block header */ + QS_DCB_HDR = 0x02, /* Device Control Block header */ + + /* pkt HCB flag bits */ + QS_HF_DIRO = (1 << 0), /* data DIRection Out */ + QS_HF_DAT = (1 << 3), /* DATa pkt */ + QS_HF_IEN = (1 << 4), /* Interrupt ENable */ + QS_HF_VLD = (1 << 5), /* VaLiD pkt */ + + /* pkt DCB flag bits */ + QS_DF_PORD = (1 << 2), /* Pio OR Dma */ + QS_DF_ELBA = (1 << 3), /* Extended LBA (lba48) */ + + /* PCI device IDs */ + board_2068_idx = 0, /* QStor 4-port SATA/RAID */ +}; + +enum { + QS_DMA_BOUNDARY = ~0UL +}; + +typedef enum { qs_state_mmio, qs_state_pkt } qs_state_t; + +struct qs_port_priv { + u8 *pkt; + dma_addr_t pkt_dma; + qs_state_t state; +}; + +static int qs_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); +static int qs_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static int qs_ata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static int qs_port_start(struct ata_port *ap); +static void qs_host_stop(struct ata_host *host); +static void qs_qc_prep(struct ata_queued_cmd *qc); +static unsigned int qs_qc_issue(struct ata_queued_cmd *qc); +static int qs_check_atapi_dma(struct ata_queued_cmd *qc); +static void qs_freeze(struct ata_port *ap); +static void qs_thaw(struct ata_port *ap); +static int qs_prereset(struct ata_link *link, unsigned long deadline); +static void qs_error_handler(struct ata_port *ap); + +static struct scsi_host_template qs_ata_sht = { + ATA_BASE_SHT(DRV_NAME), + .sg_tablesize = QS_MAX_PRD, + .dma_boundary = QS_DMA_BOUNDARY, +}; + +static struct ata_port_operations qs_ata_ops = { + .inherits = &ata_sff_port_ops, + + .check_atapi_dma = qs_check_atapi_dma, + .qc_prep = qs_qc_prep, + .qc_issue = qs_qc_issue, + + .freeze = qs_freeze, + .thaw = qs_thaw, + .prereset = qs_prereset, + .softreset = ATA_OP_NULL, + .error_handler = qs_error_handler, + .lost_interrupt = ATA_OP_NULL, + + .scr_read = qs_scr_read, + .scr_write = qs_scr_write, + + .port_start = qs_port_start, + .host_stop = qs_host_stop, +}; + +static const struct ata_port_info qs_port_info[] = { + /* board_2068_idx */ + { + .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_POLLING, + .pio_mask = ATA_PIO4_ONLY, + .udma_mask = ATA_UDMA6, + .port_ops = &qs_ata_ops, + }, +}; + +static const struct pci_device_id qs_ata_pci_tbl[] = { + { PCI_VDEVICE(PDC, 0x2068), board_2068_idx }, + + { } /* terminate list */ +}; + +static struct pci_driver qs_ata_pci_driver = { + .name = DRV_NAME, + .id_table = qs_ata_pci_tbl, + .probe = qs_ata_init_one, + .remove = ata_pci_remove_one, +}; + +static void __iomem *qs_mmio_base(struct ata_host *host) +{ + return host->iomap[QS_MMIO_BAR]; +} + +static int qs_check_atapi_dma(struct ata_queued_cmd *qc) +{ + return 1; /* ATAPI DMA not supported */ +} + +static inline void qs_enter_reg_mode(struct ata_port *ap) +{ + u8 __iomem *chan = qs_mmio_base(ap->host) + (ap->port_no * 0x4000); + struct qs_port_priv *pp = ap->private_data; + + pp->state = qs_state_mmio; + writeb(QS_CTR0_REG, chan + QS_CCT_CTR0); + readb(chan + QS_CCT_CTR0); /* flush */ +} + +static inline void qs_reset_channel_logic(struct ata_port *ap) +{ + u8 __iomem *chan = qs_mmio_base(ap->host) + (ap->port_no * 0x4000); + + writeb(QS_CTR1_RCHN, chan + QS_CCT_CTR1); + readb(chan + QS_CCT_CTR0); /* flush */ + qs_enter_reg_mode(ap); +} + +static void qs_freeze(struct ata_port *ap) +{ + u8 __iomem *mmio_base = qs_mmio_base(ap->host); + + writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */ + qs_enter_reg_mode(ap); +} + +static void qs_thaw(struct ata_port *ap) +{ + u8 __iomem *mmio_base = qs_mmio_base(ap->host); + + qs_enter_reg_mode(ap); + writeb(1, mmio_base + QS_HCT_CTRL); /* enable host interrupts */ +} + +static int qs_prereset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + + qs_reset_channel_logic(ap); + return ata_sff_prereset(link, deadline); +} + +static int qs_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) +{ + if (sc_reg > SCR_CONTROL) + return -EINVAL; + *val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 8)); + return 0; +} + +static void qs_error_handler(struct ata_port *ap) +{ + qs_enter_reg_mode(ap); + ata_sff_error_handler(ap); +} + +static int qs_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) +{ + if (sc_reg > SCR_CONTROL) + return -EINVAL; + writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 8)); + return 0; +} + +static unsigned int qs_fill_sg(struct ata_queued_cmd *qc) +{ + struct scatterlist *sg; + struct ata_port *ap = qc->ap; + struct qs_port_priv *pp = ap->private_data; + u8 *prd = pp->pkt + QS_CPB_BYTES; + unsigned int si; + + for_each_sg(qc->sg, sg, qc->n_elem, si) { + u64 addr; + u32 len; + + addr = sg_dma_address(sg); + *(__le64 *)prd = cpu_to_le64(addr); + prd += sizeof(u64); + + len = sg_dma_len(sg); + *(__le32 *)prd = cpu_to_le32(len); + prd += sizeof(u64); + + VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", si, + (unsigned long long)addr, len); + } + + return si; +} + +static void qs_qc_prep(struct ata_queued_cmd *qc) +{ + struct qs_port_priv *pp = qc->ap->private_data; + u8 dflags = QS_DF_PORD, *buf = pp->pkt; + u8 hflags = QS_HF_DAT | QS_HF_IEN | QS_HF_VLD; + u64 addr; + unsigned int nelem; + + VPRINTK("ENTER\n"); + + qs_enter_reg_mode(qc->ap); + if (qc->tf.protocol != ATA_PROT_DMA) + return; + + nelem = qs_fill_sg(qc); + + if ((qc->tf.flags & ATA_TFLAG_WRITE)) + hflags |= QS_HF_DIRO; + if ((qc->tf.flags & ATA_TFLAG_LBA48)) + dflags |= QS_DF_ELBA; + + /* host control block (HCB) */ + buf[ 0] = QS_HCB_HDR; + buf[ 1] = hflags; + *(__le32 *)(&buf[ 4]) = cpu_to_le32(qc->nbytes); + *(__le32 *)(&buf[ 8]) = cpu_to_le32(nelem); + addr = ((u64)pp->pkt_dma) + QS_CPB_BYTES; + *(__le64 *)(&buf[16]) = cpu_to_le64(addr); + + /* device control block (DCB) */ + buf[24] = QS_DCB_HDR; + buf[28] = dflags; + + /* frame information structure (FIS) */ + ata_tf_to_fis(&qc->tf, 0, 1, &buf[32]); +} + +static inline void qs_packet_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + u8 __iomem *chan = qs_mmio_base(ap->host) + (ap->port_no * 0x4000); + + VPRINTK("ENTER, ap %p\n", ap); + + writeb(QS_CTR0_CLER, chan + QS_CCT_CTR0); + wmb(); /* flush PRDs and pkt to memory */ + writel(QS_CCF_RUN_PKT, chan + QS_CCT_CFF); + readl(chan + QS_CCT_CFF); /* flush */ +} + +static unsigned int qs_qc_issue(struct ata_queued_cmd *qc) +{ + struct qs_port_priv *pp = qc->ap->private_data; + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + pp->state = qs_state_pkt; + qs_packet_start(qc); + return 0; + + case ATAPI_PROT_DMA: + BUG(); + break; + + default: + break; + } + + pp->state = qs_state_mmio; + return ata_sff_qc_issue(qc); +} + +static void qs_do_or_die(struct ata_queued_cmd *qc, u8 status) +{ + qc->err_mask |= ac_err_mask(status); + + if (!qc->err_mask) { + ata_qc_complete(qc); + } else { + struct ata_port *ap = qc->ap; + struct ata_eh_info *ehi = &ap->link.eh_info; + + ata_ehi_clear_desc(ehi); + ata_ehi_push_desc(ehi, "status 0x%02X", status); + + if (qc->err_mask == AC_ERR_DEV) + ata_port_abort(ap); + else + ata_port_freeze(ap); + } +} + +static inline unsigned int qs_intr_pkt(struct ata_host *host) +{ + unsigned int handled = 0; + u8 sFFE; + u8 __iomem *mmio_base = qs_mmio_base(host); + + do { + u32 sff0 = readl(mmio_base + QS_HST_SFF); + u32 sff1 = readl(mmio_base + QS_HST_SFF + 4); + u8 sEVLD = (sff1 >> 30) & 0x01; /* valid flag */ + sFFE = sff1 >> 31; /* empty flag */ + + if (sEVLD) { + u8 sDST = sff0 >> 16; /* dev status */ + u8 sHST = sff1 & 0x3f; /* host status */ + unsigned int port_no = (sff1 >> 8) & 0x03; + struct ata_port *ap = host->ports[port_no]; + struct qs_port_priv *pp = ap->private_data; + struct ata_queued_cmd *qc; + + DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n", + sff1, sff0, port_no, sHST, sDST); + handled = 1; + if (!pp || pp->state != qs_state_pkt) + continue; + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { + switch (sHST) { + case 0: /* successful CPB */ + case 3: /* device error */ + qs_enter_reg_mode(qc->ap); + qs_do_or_die(qc, sDST); + break; + default: + break; + } + } + } + } while (!sFFE); + return handled; +} + +static inline unsigned int qs_intr_mmio(struct ata_host *host) +{ + unsigned int handled = 0, port_no; + + for (port_no = 0; port_no < host->n_ports; ++port_no) { + struct ata_port *ap = host->ports[port_no]; + struct qs_port_priv *pp = ap->private_data; + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (!qc) { + /* + * The qstor hardware generates spurious + * interrupts from time to time when switching + * in and out of packet mode. There's no + * obvious way to know if we're here now due + * to that, so just ack the irq and pretend we + * knew it was ours.. (ugh). This does not + * affect packet mode. + */ + ata_sff_check_status(ap); + handled = 1; + continue; + } + + if (!pp || pp->state != qs_state_mmio) + continue; + if (!(qc->tf.flags & ATA_TFLAG_POLLING)) + handled |= ata_sff_port_intr(ap, qc); + } + return handled; +} + +static irqreturn_t qs_intr(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + unsigned int handled = 0; + unsigned long flags; + + VPRINTK("ENTER\n"); + + spin_lock_irqsave(&host->lock, flags); + handled = qs_intr_pkt(host) | qs_intr_mmio(host); + spin_unlock_irqrestore(&host->lock, flags); + + VPRINTK("EXIT\n"); + + return IRQ_RETVAL(handled); +} + +static void qs_ata_setup_port(struct ata_ioports *port, void __iomem *base) +{ + port->cmd_addr = + port->data_addr = base + 0x400; + port->error_addr = + port->feature_addr = base + 0x408; /* hob_feature = 0x409 */ + port->nsect_addr = base + 0x410; /* hob_nsect = 0x411 */ + port->lbal_addr = base + 0x418; /* hob_lbal = 0x419 */ + port->lbam_addr = base + 0x420; /* hob_lbam = 0x421 */ + port->lbah_addr = base + 0x428; /* hob_lbah = 0x429 */ + port->device_addr = base + 0x430; + port->status_addr = + port->command_addr = base + 0x438; + port->altstatus_addr = + port->ctl_addr = base + 0x440; + port->scr_addr = base + 0xc00; +} + +static int qs_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct qs_port_priv *pp; + void __iomem *mmio_base = qs_mmio_base(ap->host); + void __iomem *chan = mmio_base + (ap->port_no * 0x4000); + u64 addr; + + pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + pp->pkt = dmam_alloc_coherent(dev, QS_PKT_BYTES, &pp->pkt_dma, + GFP_KERNEL); + if (!pp->pkt) + return -ENOMEM; + memset(pp->pkt, 0, QS_PKT_BYTES); + ap->private_data = pp; + + qs_enter_reg_mode(ap); + addr = (u64)pp->pkt_dma; + writel((u32) addr, chan + QS_CCF_CPBA); + writel((u32)(addr >> 32), chan + QS_CCF_CPBA + 4); + return 0; +} + +static void qs_host_stop(struct ata_host *host) +{ + void __iomem *mmio_base = qs_mmio_base(host); + + writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */ + writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */ +} + +static void qs_host_init(struct ata_host *host, unsigned int chip_id) +{ + void __iomem *mmio_base = host->iomap[QS_MMIO_BAR]; + unsigned int port_no; + + writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */ + writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */ + + /* reset each channel in turn */ + for (port_no = 0; port_no < host->n_ports; ++port_no) { + u8 __iomem *chan = mmio_base + (port_no * 0x4000); + writeb(QS_CTR1_RDEV|QS_CTR1_RCHN, chan + QS_CCT_CTR1); + writeb(QS_CTR0_REG, chan + QS_CCT_CTR0); + readb(chan + QS_CCT_CTR0); /* flush */ + } + writeb(QS_SERD3_PHY_ENA, mmio_base + QS_HVS_SERD3); /* enable phy */ + + for (port_no = 0; port_no < host->n_ports; ++port_no) { + u8 __iomem *chan = mmio_base + (port_no * 0x4000); + /* set FIFO depths to same settings as Windows driver */ + writew(32, chan + QS_CFC_HUFT); + writew(32, chan + QS_CFC_HDFT); + writew(10, chan + QS_CFC_DUFT); + writew( 8, chan + QS_CFC_DDFT); + /* set CPB size in bytes, as a power of two */ + writeb(QS_CPB_ORDER, chan + QS_CCF_CSEP); + } + writeb(1, mmio_base + QS_HCT_CTRL); /* enable host interrupts */ +} + +/* + * The QStor understands 64-bit buses, and uses 64-bit fields + * for DMA pointers regardless of bus width. We just have to + * make sure our DMA masks are set appropriately for whatever + * bridge lies between us and the QStor, and then the DMA mapping + * code will ensure we only ever "see" appropriate buffer addresses. + * If we're 32-bit limited somewhere, then our 64-bit fields will + * just end up with zeros in the upper 32-bits, without any special + * logic required outside of this routine (below). + */ +static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base) +{ + u32 bus_info = readl(mmio_base + QS_HID_HPHY); + int rc, have_64bit_bus = (bus_info & QS_HPHY_64BIT); + + if (have_64bit_bus && + !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) { + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + if (rc) { + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, + "64-bit DMA enable failed\n"); + return rc; + } + } + } else { + rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, "32-bit DMA enable failed\n"); + return rc; + } + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, + "32-bit consistent DMA enable failed\n"); + return rc; + } + } + return 0; +} + +static int qs_ata_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + unsigned int board_idx = (unsigned int) ent->driver_data; + const struct ata_port_info *ppi[] = { &qs_port_info[board_idx], NULL }; + struct ata_host *host; + int rc, port_no; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* alloc host */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, QS_PORTS); + if (!host) + return -ENOMEM; + + /* acquire resources and fill host */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + if ((pci_resource_flags(pdev, QS_MMIO_BAR) & IORESOURCE_MEM) == 0) + return -ENODEV; + + rc = pcim_iomap_regions(pdev, 1 << QS_MMIO_BAR, DRV_NAME); + if (rc) + return rc; + host->iomap = pcim_iomap_table(pdev); + + rc = qs_set_dma_masks(pdev, host->iomap[QS_MMIO_BAR]); + if (rc) + return rc; + + for (port_no = 0; port_no < host->n_ports; ++port_no) { + struct ata_port *ap = host->ports[port_no]; + unsigned int offset = port_no * 0x4000; + void __iomem *chan = host->iomap[QS_MMIO_BAR] + offset; + + qs_ata_setup_port(&ap->ioaddr, chan); + + ata_port_pbar_desc(ap, QS_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, QS_MMIO_BAR, offset, "port"); + } + + /* initialize adapter */ + qs_host_init(host, board_idx); + + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, qs_intr, IRQF_SHARED, + &qs_ata_sht); +} + +module_pci_driver(qs_ata_pci_driver); + +MODULE_AUTHOR("Mark Lord"); +MODULE_DESCRIPTION("Pacific Digital Corporation QStor SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, qs_ata_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c new file mode 100644 index 000000000..d49a5193b --- /dev/null +++ b/drivers/ata/sata_rcar.c @@ -0,0 +1,1039 @@ +/* + * Renesas R-Car SATA driver + * + * Author: Vladimir Barinov + * Copyright (C) 2013-2015 Cogent Embedded, Inc. + * Copyright (C) 2013-2015 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_rcar" + +/* SH-Navi2G/ATAPI-ATA compatible task registers */ +#define DATA_REG 0x100 +#define SDEVCON_REG 0x138 + +/* SH-Navi2G/ATAPI module compatible control registers */ +#define ATAPI_CONTROL1_REG 0x180 +#define ATAPI_STATUS_REG 0x184 +#define ATAPI_INT_ENABLE_REG 0x188 +#define ATAPI_DTB_ADR_REG 0x198 +#define ATAPI_DMA_START_ADR_REG 0x19C +#define ATAPI_DMA_TRANS_CNT_REG 0x1A0 +#define ATAPI_CONTROL2_REG 0x1A4 +#define ATAPI_SIG_ST_REG 0x1B0 +#define ATAPI_BYTE_SWAP_REG 0x1BC + +/* ATAPI control 1 register (ATAPI_CONTROL1) bits */ +#define ATAPI_CONTROL1_ISM BIT(16) +#define ATAPI_CONTROL1_DTA32M BIT(11) +#define ATAPI_CONTROL1_RESET BIT(7) +#define ATAPI_CONTROL1_DESE BIT(3) +#define ATAPI_CONTROL1_RW BIT(2) +#define ATAPI_CONTROL1_STOP BIT(1) +#define ATAPI_CONTROL1_START BIT(0) + +/* ATAPI status register (ATAPI_STATUS) bits */ +#define ATAPI_STATUS_SATAINT BIT(11) +#define ATAPI_STATUS_DNEND BIT(6) +#define ATAPI_STATUS_DEVTRM BIT(5) +#define ATAPI_STATUS_DEVINT BIT(4) +#define ATAPI_STATUS_ERR BIT(2) +#define ATAPI_STATUS_NEND BIT(1) +#define ATAPI_STATUS_ACT BIT(0) + +/* Interrupt enable register (ATAPI_INT_ENABLE) bits */ +#define ATAPI_INT_ENABLE_SATAINT BIT(11) +#define ATAPI_INT_ENABLE_DNEND BIT(6) +#define ATAPI_INT_ENABLE_DEVTRM BIT(5) +#define ATAPI_INT_ENABLE_DEVINT BIT(4) +#define ATAPI_INT_ENABLE_ERR BIT(2) +#define ATAPI_INT_ENABLE_NEND BIT(1) +#define ATAPI_INT_ENABLE_ACT BIT(0) + +/* Access control registers for physical layer control register */ +#define SATAPHYADDR_REG 0x200 +#define SATAPHYWDATA_REG 0x204 +#define SATAPHYACCEN_REG 0x208 +#define SATAPHYRESET_REG 0x20C +#define SATAPHYRDATA_REG 0x210 +#define SATAPHYACK_REG 0x214 + +/* Physical layer control address command register (SATAPHYADDR) bits */ +#define SATAPHYADDR_PHYRATEMODE BIT(10) +#define SATAPHYADDR_PHYCMD_READ BIT(9) +#define SATAPHYADDR_PHYCMD_WRITE BIT(8) + +/* Physical layer control enable register (SATAPHYACCEN) bits */ +#define SATAPHYACCEN_PHYLANE BIT(0) + +/* Physical layer control reset register (SATAPHYRESET) bits */ +#define SATAPHYRESET_PHYRST BIT(1) +#define SATAPHYRESET_PHYSRES BIT(0) + +/* Physical layer control acknowledge register (SATAPHYACK) bits */ +#define SATAPHYACK_PHYACK BIT(0) + +/* Serial-ATA HOST control registers */ +#define BISTCONF_REG 0x102C +#define SDATA_REG 0x1100 +#define SSDEVCON_REG 0x1204 + +#define SCRSSTS_REG 0x1400 +#define SCRSERR_REG 0x1404 +#define SCRSCON_REG 0x1408 +#define SCRSACT_REG 0x140C + +#define SATAINTSTAT_REG 0x1508 +#define SATAINTMASK_REG 0x150C + +/* SATA INT status register (SATAINTSTAT) bits */ +#define SATAINTSTAT_SERR BIT(3) +#define SATAINTSTAT_ATA BIT(0) + +/* SATA INT mask register (SATAINTSTAT) bits */ +#define SATAINTMASK_SERRMSK BIT(3) +#define SATAINTMASK_ERRMSK BIT(2) +#define SATAINTMASK_ERRCRTMSK BIT(1) +#define SATAINTMASK_ATAMSK BIT(0) + +#define SATA_RCAR_INT_MASK (SATAINTMASK_SERRMSK | \ + SATAINTMASK_ATAMSK) + +/* Physical Layer Control Registers */ +#define SATAPCTLR1_REG 0x43 +#define SATAPCTLR2_REG 0x52 +#define SATAPCTLR3_REG 0x5A +#define SATAPCTLR4_REG 0x60 + +/* Descriptor table word 0 bit (when DTA32M = 1) */ +#define SATA_RCAR_DTEND BIT(0) + +#define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFEUL + +/* Gen2 Physical Layer Control Registers */ +#define RCAR_GEN2_PHY_CTL1_REG 0x1704 +#define RCAR_GEN2_PHY_CTL1 0x34180002 +#define RCAR_GEN2_PHY_CTL1_SS 0xC180 /* Spread Spectrum */ + +#define RCAR_GEN2_PHY_CTL2_REG 0x170C +#define RCAR_GEN2_PHY_CTL2 0x00002303 + +#define RCAR_GEN2_PHY_CTL3_REG 0x171C +#define RCAR_GEN2_PHY_CTL3 0x000B0194 + +#define RCAR_GEN2_PHY_CTL4_REG 0x1724 +#define RCAR_GEN2_PHY_CTL4 0x00030994 + +#define RCAR_GEN2_PHY_CTL5_REG 0x1740 +#define RCAR_GEN2_PHY_CTL5 0x03004001 +#define RCAR_GEN2_PHY_CTL5_DC BIT(1) /* DC connection */ +#define RCAR_GEN2_PHY_CTL5_TR BIT(2) /* Termination Resistor */ + +enum sata_rcar_type { + RCAR_GEN1_SATA, + RCAR_GEN2_SATA, + RCAR_R8A7790_ES1_SATA, +}; + +struct sata_rcar_priv { + void __iomem *base; + struct clk *clk; + enum sata_rcar_type type; +}; + +static void sata_rcar_gen1_phy_preinit(struct sata_rcar_priv *priv) +{ + void __iomem *base = priv->base; + + /* idle state */ + iowrite32(0, base + SATAPHYADDR_REG); + /* reset */ + iowrite32(SATAPHYRESET_PHYRST, base + SATAPHYRESET_REG); + udelay(10); + /* deassert reset */ + iowrite32(0, base + SATAPHYRESET_REG); +} + +static void sata_rcar_gen1_phy_write(struct sata_rcar_priv *priv, u16 reg, + u32 val, int group) +{ + void __iomem *base = priv->base; + int timeout; + + /* deassert reset */ + iowrite32(0, base + SATAPHYRESET_REG); + /* lane 1 */ + iowrite32(SATAPHYACCEN_PHYLANE, base + SATAPHYACCEN_REG); + /* write phy register value */ + iowrite32(val, base + SATAPHYWDATA_REG); + /* set register group */ + if (group) + reg |= SATAPHYADDR_PHYRATEMODE; + /* write command */ + iowrite32(SATAPHYADDR_PHYCMD_WRITE | reg, base + SATAPHYADDR_REG); + /* wait for ack */ + for (timeout = 0; timeout < 100; timeout++) { + val = ioread32(base + SATAPHYACK_REG); + if (val & SATAPHYACK_PHYACK) + break; + } + if (timeout >= 100) + pr_err("%s timeout\n", __func__); + /* idle state */ + iowrite32(0, base + SATAPHYADDR_REG); +} + +static void sata_rcar_gen1_phy_init(struct sata_rcar_priv *priv) +{ + sata_rcar_gen1_phy_preinit(priv); + sata_rcar_gen1_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 0); + sata_rcar_gen1_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 1); + sata_rcar_gen1_phy_write(priv, SATAPCTLR3_REG, 0x0000A061, 0); + sata_rcar_gen1_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 0); + sata_rcar_gen1_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 1); + sata_rcar_gen1_phy_write(priv, SATAPCTLR4_REG, 0x28E80000, 0); +} + +static void sata_rcar_gen2_phy_init(struct sata_rcar_priv *priv) +{ + void __iomem *base = priv->base; + + iowrite32(RCAR_GEN2_PHY_CTL1, base + RCAR_GEN2_PHY_CTL1_REG); + iowrite32(RCAR_GEN2_PHY_CTL2, base + RCAR_GEN2_PHY_CTL2_REG); + iowrite32(RCAR_GEN2_PHY_CTL3, base + RCAR_GEN2_PHY_CTL3_REG); + iowrite32(RCAR_GEN2_PHY_CTL4, base + RCAR_GEN2_PHY_CTL4_REG); + iowrite32(RCAR_GEN2_PHY_CTL5 | RCAR_GEN2_PHY_CTL5_DC | + RCAR_GEN2_PHY_CTL5_TR, base + RCAR_GEN2_PHY_CTL5_REG); +} + +static void sata_rcar_freeze(struct ata_port *ap) +{ + struct sata_rcar_priv *priv = ap->host->private_data; + + /* mask */ + iowrite32(0x7ff, priv->base + SATAINTMASK_REG); + + ata_sff_freeze(ap); +} + +static void sata_rcar_thaw(struct ata_port *ap) +{ + struct sata_rcar_priv *priv = ap->host->private_data; + void __iomem *base = priv->base; + + /* ack */ + iowrite32(~(u32)SATA_RCAR_INT_MASK, base + SATAINTSTAT_REG); + + ata_sff_thaw(ap); + + /* unmask */ + iowrite32(0x7ff & ~SATA_RCAR_INT_MASK, base + SATAINTMASK_REG); +} + +static void sata_rcar_ioread16_rep(void __iomem *reg, void *buffer, int count) +{ + u16 *ptr = buffer; + + while (count--) { + u16 data = ioread32(reg); + + *ptr++ = data; + } +} + +static void sata_rcar_iowrite16_rep(void __iomem *reg, void *buffer, int count) +{ + const u16 *ptr = buffer; + + while (count--) + iowrite32(*ptr++, reg); +} + +static u8 sata_rcar_check_status(struct ata_port *ap) +{ + return ioread32(ap->ioaddr.status_addr); +} + +static u8 sata_rcar_check_altstatus(struct ata_port *ap) +{ + return ioread32(ap->ioaddr.altstatus_addr); +} + +static void sata_rcar_set_devctl(struct ata_port *ap, u8 ctl) +{ + iowrite32(ctl, ap->ioaddr.ctl_addr); +} + +static void sata_rcar_dev_select(struct ata_port *ap, unsigned int device) +{ + iowrite32(ATA_DEVICE_OBS, ap->ioaddr.device_addr); + ata_sff_pause(ap); /* needed; also flushes, for mmio */ +} + +static unsigned int sata_rcar_ata_devchk(struct ata_port *ap, + unsigned int device) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u8 nsect, lbal; + + sata_rcar_dev_select(ap, device); + + iowrite32(0x55, ioaddr->nsect_addr); + iowrite32(0xaa, ioaddr->lbal_addr); + + iowrite32(0xaa, ioaddr->nsect_addr); + iowrite32(0x55, ioaddr->lbal_addr); + + iowrite32(0x55, ioaddr->nsect_addr); + iowrite32(0xaa, ioaddr->lbal_addr); + + nsect = ioread32(ioaddr->nsect_addr); + lbal = ioread32(ioaddr->lbal_addr); + + if (nsect == 0x55 && lbal == 0xaa) + return 1; /* found a device */ + + return 0; /* nothing found */ +} + +static int sata_rcar_wait_after_reset(struct ata_link *link, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + + ata_msleep(ap, ATA_WAIT_AFTER_RESET); + + return ata_sff_wait_ready(link, deadline); +} + +static int sata_rcar_bus_softreset(struct ata_port *ap, unsigned long deadline) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + DPRINTK("ata%u: bus reset via SRST\n", ap->print_id); + + /* software reset. causes dev0 to be selected */ + iowrite32(ap->ctl, ioaddr->ctl_addr); + udelay(20); + iowrite32(ap->ctl | ATA_SRST, ioaddr->ctl_addr); + udelay(20); + iowrite32(ap->ctl, ioaddr->ctl_addr); + ap->last_ctl = ap->ctl; + + /* wait the port to become ready */ + return sata_rcar_wait_after_reset(&ap->link, deadline); +} + +static int sata_rcar_softreset(struct ata_link *link, unsigned int *classes, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + unsigned int devmask = 0; + int rc; + u8 err; + + /* determine if device 0 is present */ + if (sata_rcar_ata_devchk(ap, 0)) + devmask |= 1 << 0; + + /* issue bus reset */ + DPRINTK("about to softreset, devmask=%x\n", devmask); + rc = sata_rcar_bus_softreset(ap, deadline); + /* if link is occupied, -ENODEV too is an error */ + if (rc && (rc != -ENODEV || sata_scr_valid(link))) { + ata_link_err(link, "SRST failed (errno=%d)\n", rc); + return rc; + } + + /* determine by signature whether we have ATA or ATAPI devices */ + classes[0] = ata_sff_dev_classify(&link->device[0], devmask, &err); + + DPRINTK("classes[0]=%u\n", classes[0]); + return 0; +} + +static void sata_rcar_tf_load(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + iowrite32(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + iowrite32(tf->hob_feature, ioaddr->feature_addr); + iowrite32(tf->hob_nsect, ioaddr->nsect_addr); + iowrite32(tf->hob_lbal, ioaddr->lbal_addr); + iowrite32(tf->hob_lbam, ioaddr->lbam_addr); + iowrite32(tf->hob_lbah, ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + + if (is_addr) { + iowrite32(tf->feature, ioaddr->feature_addr); + iowrite32(tf->nsect, ioaddr->nsect_addr); + iowrite32(tf->lbal, ioaddr->lbal_addr); + iowrite32(tf->lbam, ioaddr->lbam_addr); + iowrite32(tf->lbah, ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + iowrite32(tf->device, ioaddr->device_addr); + VPRINTK("device 0x%X\n", tf->device); + } + + ata_wait_idle(ap); +} + +static void sata_rcar_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->command = sata_rcar_check_status(ap); + tf->feature = ioread32(ioaddr->error_addr); + tf->nsect = ioread32(ioaddr->nsect_addr); + tf->lbal = ioread32(ioaddr->lbal_addr); + tf->lbam = ioread32(ioaddr->lbam_addr); + tf->lbah = ioread32(ioaddr->lbah_addr); + tf->device = ioread32(ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + iowrite32(tf->ctl | ATA_HOB, ioaddr->ctl_addr); + tf->hob_feature = ioread32(ioaddr->error_addr); + tf->hob_nsect = ioread32(ioaddr->nsect_addr); + tf->hob_lbal = ioread32(ioaddr->lbal_addr); + tf->hob_lbam = ioread32(ioaddr->lbam_addr); + tf->hob_lbah = ioread32(ioaddr->lbah_addr); + iowrite32(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + } +} + +static void sata_rcar_exec_command(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); + + iowrite32(tf->command, ap->ioaddr.command_addr); + ata_sff_pause(ap); +} + +static unsigned int sata_rcar_data_xfer(struct ata_device *dev, + unsigned char *buf, + unsigned int buflen, int rw) +{ + struct ata_port *ap = dev->link->ap; + void __iomem *data_addr = ap->ioaddr.data_addr; + unsigned int words = buflen >> 1; + + /* Transfer multiple of 2 bytes */ + if (rw == READ) + sata_rcar_ioread16_rep(data_addr, buf, words); + else + sata_rcar_iowrite16_rep(data_addr, buf, words); + + /* Transfer trailing byte, if any. */ + if (unlikely(buflen & 0x01)) { + unsigned char pad[2] = { }; + + /* Point buf to the tail of buffer */ + buf += buflen - 1; + + /* + * Use io*16_rep() accessors here as well to avoid pointlessly + * swapping bytes to and from on the big endian machines... + */ + if (rw == READ) { + sata_rcar_ioread16_rep(data_addr, pad, 1); + *buf = pad[0]; + } else { + pad[0] = *buf; + sata_rcar_iowrite16_rep(data_addr, pad, 1); + } + words++; + } + + return words << 1; +} + +static void sata_rcar_drain_fifo(struct ata_queued_cmd *qc) +{ + int count; + struct ata_port *ap; + + /* We only need to flush incoming data when a command was running */ + if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) + return; + + ap = qc->ap; + /* Drain up to 64K of data before we give up this recovery method */ + for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) && + count < 65536; count += 2) + ioread32(ap->ioaddr.data_addr); + + /* Can become DEBUG later */ + if (count) + ata_port_dbg(ap, "drained %d bytes to clear DRQ\n", count); +} + +static int sata_rcar_scr_read(struct ata_link *link, unsigned int sc_reg, + u32 *val) +{ + if (sc_reg > SCR_ACTIVE) + return -EINVAL; + + *val = ioread32(link->ap->ioaddr.scr_addr + (sc_reg << 2)); + return 0; +} + +static int sata_rcar_scr_write(struct ata_link *link, unsigned int sc_reg, + u32 val) +{ + if (sc_reg > SCR_ACTIVE) + return -EINVAL; + + iowrite32(val, link->ap->ioaddr.scr_addr + (sc_reg << 2)); + return 0; +} + +static void sata_rcar_bmdma_fill_sg(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_bmdma_prd *prd = ap->bmdma_prd; + struct scatterlist *sg; + unsigned int si; + + for_each_sg(qc->sg, sg, qc->n_elem, si) { + u32 addr, sg_len; + + /* + * Note: h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + addr = (u32)sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + prd[si].addr = cpu_to_le32(addr); + prd[si].flags_len = cpu_to_le32(sg_len); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", si, addr, sg_len); + } + + /* end-of-table flag */ + prd[si - 1].addr |= cpu_to_le32(SATA_RCAR_DTEND); +} + +static void sata_rcar_qc_prep(struct ata_queued_cmd *qc) +{ + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + sata_rcar_bmdma_fill_sg(qc); +} + +static void sata_rcar_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int rw = qc->tf.flags & ATA_TFLAG_WRITE; + struct sata_rcar_priv *priv = ap->host->private_data; + void __iomem *base = priv->base; + u32 dmactl; + + /* load PRD table addr. */ + mb(); /* make sure PRD table writes are visible to controller */ + iowrite32(ap->bmdma_prd_dma, base + ATAPI_DTB_ADR_REG); + + /* specify data direction, triple-check start bit is clear */ + dmactl = ioread32(base + ATAPI_CONTROL1_REG); + dmactl &= ~(ATAPI_CONTROL1_RW | ATAPI_CONTROL1_STOP); + if (dmactl & ATAPI_CONTROL1_START) { + dmactl &= ~ATAPI_CONTROL1_START; + dmactl |= ATAPI_CONTROL1_STOP; + } + if (!rw) + dmactl |= ATAPI_CONTROL1_RW; + iowrite32(dmactl, base + ATAPI_CONTROL1_REG); + + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} + +static void sata_rcar_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sata_rcar_priv *priv = ap->host->private_data; + void __iomem *base = priv->base; + u32 dmactl; + + /* start host DMA transaction */ + dmactl = ioread32(base + ATAPI_CONTROL1_REG); + dmactl &= ~ATAPI_CONTROL1_STOP; + dmactl |= ATAPI_CONTROL1_START; + iowrite32(dmactl, base + ATAPI_CONTROL1_REG); +} + +static void sata_rcar_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sata_rcar_priv *priv = ap->host->private_data; + void __iomem *base = priv->base; + u32 dmactl; + + /* force termination of DMA transfer if active */ + dmactl = ioread32(base + ATAPI_CONTROL1_REG); + if (dmactl & ATAPI_CONTROL1_START) { + dmactl &= ~ATAPI_CONTROL1_START; + dmactl |= ATAPI_CONTROL1_STOP; + iowrite32(dmactl, base + ATAPI_CONTROL1_REG); + } + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_sff_dma_pause(ap); +} + +static u8 sata_rcar_bmdma_status(struct ata_port *ap) +{ + struct sata_rcar_priv *priv = ap->host->private_data; + u8 host_stat = 0; + u32 status; + + status = ioread32(priv->base + ATAPI_STATUS_REG); + if (status & ATAPI_STATUS_DEVINT) + host_stat |= ATA_DMA_INTR; + if (status & ATAPI_STATUS_ACT) + host_stat |= ATA_DMA_ACTIVE; + + return host_stat; +} + +static struct scsi_host_template sata_rcar_sht = { + ATA_BASE_SHT(DRV_NAME), + /* + * This controller allows transfer chunks up to 512MB which cross 64KB + * boundaries, therefore the DMA limits are more relaxed than standard + * ATA SFF. + */ + .sg_tablesize = ATA_MAX_PRD, + .dma_boundary = SATA_RCAR_DMA_BOUNDARY, +}; + +static struct ata_port_operations sata_rcar_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .freeze = sata_rcar_freeze, + .thaw = sata_rcar_thaw, + .softreset = sata_rcar_softreset, + + .scr_read = sata_rcar_scr_read, + .scr_write = sata_rcar_scr_write, + + .sff_dev_select = sata_rcar_dev_select, + .sff_set_devctl = sata_rcar_set_devctl, + .sff_check_status = sata_rcar_check_status, + .sff_check_altstatus = sata_rcar_check_altstatus, + .sff_tf_load = sata_rcar_tf_load, + .sff_tf_read = sata_rcar_tf_read, + .sff_exec_command = sata_rcar_exec_command, + .sff_data_xfer = sata_rcar_data_xfer, + .sff_drain_fifo = sata_rcar_drain_fifo, + + .qc_prep = sata_rcar_qc_prep, + + .bmdma_setup = sata_rcar_bmdma_setup, + .bmdma_start = sata_rcar_bmdma_start, + .bmdma_stop = sata_rcar_bmdma_stop, + .bmdma_status = sata_rcar_bmdma_status, +}; + +static void sata_rcar_serr_interrupt(struct ata_port *ap) +{ + struct sata_rcar_priv *priv = ap->host->private_data; + struct ata_eh_info *ehi = &ap->link.eh_info; + int freeze = 0; + u32 serror; + + serror = ioread32(priv->base + SCRSERR_REG); + if (!serror) + return; + + DPRINTK("SError @host_intr: 0x%x\n", serror); + + /* first, analyze and record host port events */ + ata_ehi_clear_desc(ehi); + + if (serror & (SERR_DEV_XCHG | SERR_PHYRDY_CHG)) { + /* Setup a soft-reset EH action */ + ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, "%s", "hotplug"); + + freeze = serror & SERR_COMM_WAKE ? 0 : 1; + } + + /* freeze or abort */ + if (freeze) + ata_port_freeze(ap); + else + ata_port_abort(ap); +} + +static void sata_rcar_ata_interrupt(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + int handled = 0; + + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc) + handled |= ata_bmdma_port_intr(ap, qc); + + /* be sure to clear ATA interrupt */ + if (!handled) + sata_rcar_check_status(ap); +} + +static irqreturn_t sata_rcar_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + struct sata_rcar_priv *priv = host->private_data; + void __iomem *base = priv->base; + unsigned int handled = 0; + struct ata_port *ap; + u32 sataintstat; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + sataintstat = ioread32(base + SATAINTSTAT_REG); + sataintstat &= SATA_RCAR_INT_MASK; + if (!sataintstat) + goto done; + /* ack */ + iowrite32(~sataintstat & 0x7ff, base + SATAINTSTAT_REG); + + ap = host->ports[0]; + + if (sataintstat & SATAINTSTAT_ATA) + sata_rcar_ata_interrupt(ap); + + if (sataintstat & SATAINTSTAT_SERR) + sata_rcar_serr_interrupt(ap); + + handled = 1; +done: + spin_unlock_irqrestore(&host->lock, flags); + + return IRQ_RETVAL(handled); +} + +static void sata_rcar_setup_port(struct ata_host *host) +{ + struct ata_port *ap = host->ports[0]; + struct ata_ioports *ioaddr = &ap->ioaddr; + struct sata_rcar_priv *priv = host->private_data; + void __iomem *base = priv->base; + + ap->ops = &sata_rcar_port_ops; + ap->pio_mask = ATA_PIO4; + ap->udma_mask = ATA_UDMA6; + ap->flags |= ATA_FLAG_SATA; + + if (priv->type == RCAR_R8A7790_ES1_SATA) + ap->flags |= ATA_FLAG_NO_DIPM; + + ioaddr->cmd_addr = base + SDATA_REG; + ioaddr->ctl_addr = base + SSDEVCON_REG; + ioaddr->scr_addr = base + SCRSSTS_REG; + ioaddr->altstatus_addr = ioaddr->ctl_addr; + + ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << 2); + ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << 2); + ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << 2); + ioaddr->nsect_addr = ioaddr->cmd_addr + (ATA_REG_NSECT << 2); + ioaddr->lbal_addr = ioaddr->cmd_addr + (ATA_REG_LBAL << 2); + ioaddr->lbam_addr = ioaddr->cmd_addr + (ATA_REG_LBAM << 2); + ioaddr->lbah_addr = ioaddr->cmd_addr + (ATA_REG_LBAH << 2); + ioaddr->device_addr = ioaddr->cmd_addr + (ATA_REG_DEVICE << 2); + ioaddr->status_addr = ioaddr->cmd_addr + (ATA_REG_STATUS << 2); + ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << 2); +} + +static void sata_rcar_init_controller(struct ata_host *host) +{ + struct sata_rcar_priv *priv = host->private_data; + void __iomem *base = priv->base; + u32 val; + + /* reset and setup phy */ + switch (priv->type) { + case RCAR_GEN1_SATA: + sata_rcar_gen1_phy_init(priv); + break; + case RCAR_GEN2_SATA: + case RCAR_R8A7790_ES1_SATA: + sata_rcar_gen2_phy_init(priv); + break; + default: + dev_warn(host->dev, "SATA phy is not initialized\n"); + break; + } + + /* SATA-IP reset state */ + val = ioread32(base + ATAPI_CONTROL1_REG); + val |= ATAPI_CONTROL1_RESET; + iowrite32(val, base + ATAPI_CONTROL1_REG); + + /* ISM mode, PRD mode, DTEND flag at bit 0 */ + val = ioread32(base + ATAPI_CONTROL1_REG); + val |= ATAPI_CONTROL1_ISM; + val |= ATAPI_CONTROL1_DESE; + val |= ATAPI_CONTROL1_DTA32M; + iowrite32(val, base + ATAPI_CONTROL1_REG); + + /* Release the SATA-IP from the reset state */ + val = ioread32(base + ATAPI_CONTROL1_REG); + val &= ~ATAPI_CONTROL1_RESET; + iowrite32(val, base + ATAPI_CONTROL1_REG); + + /* ack and mask */ + iowrite32(0, base + SATAINTSTAT_REG); + iowrite32(0x7ff, base + SATAINTMASK_REG); + /* enable interrupts */ + iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG); +} + +static struct of_device_id sata_rcar_match[] = { + { + /* Deprecated by "renesas,sata-r8a7779" */ + .compatible = "renesas,rcar-sata", + .data = (void *)RCAR_GEN1_SATA, + }, + { + .compatible = "renesas,sata-r8a7779", + .data = (void *)RCAR_GEN1_SATA, + }, + { + .compatible = "renesas,sata-r8a7790", + .data = (void *)RCAR_GEN2_SATA + }, + { + .compatible = "renesas,sata-r8a7790-es1", + .data = (void *)RCAR_R8A7790_ES1_SATA + }, + { + .compatible = "renesas,sata-r8a7791", + .data = (void *)RCAR_GEN2_SATA + }, + { + .compatible = "renesas,sata-r8a7793", + .data = (void *)RCAR_GEN2_SATA + }, + { }, +}; +MODULE_DEVICE_TABLE(of, sata_rcar_match); + +static const struct platform_device_id sata_rcar_id_table[] = { + { "sata_rcar", RCAR_GEN1_SATA }, /* Deprecated by "sata-r8a7779" */ + { "sata-r8a7779", RCAR_GEN1_SATA }, + { "sata-r8a7790", RCAR_GEN2_SATA }, + { "sata-r8a7790-es1", RCAR_R8A7790_ES1_SATA }, + { "sata-r8a7791", RCAR_GEN2_SATA }, + { "sata-r8a7793", RCAR_GEN2_SATA }, + { }, +}; +MODULE_DEVICE_TABLE(platform, sata_rcar_id_table); + +static int sata_rcar_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id; + struct ata_host *host; + struct sata_rcar_priv *priv; + struct resource *mem; + int irq; + int ret = 0; + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) + return -EINVAL; + + priv = devm_kzalloc(&pdev->dev, sizeof(struct sata_rcar_priv), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + of_id = of_match_device(sata_rcar_match, &pdev->dev); + if (of_id) + priv->type = (enum sata_rcar_type)of_id->data; + else + priv->type = platform_get_device_id(pdev)->driver_data; + + priv->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(priv->clk)) { + dev_err(&pdev->dev, "failed to get access to sata clock\n"); + return PTR_ERR(priv->clk); + } + clk_prepare_enable(priv->clk); + + host = ata_host_alloc(&pdev->dev, 1); + if (!host) { + dev_err(&pdev->dev, "ata_host_alloc failed\n"); + ret = -ENOMEM; + goto cleanup; + } + + host->private_data = priv; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(priv->base)) { + ret = PTR_ERR(priv->base); + goto cleanup; + } + + /* setup port */ + sata_rcar_setup_port(host); + + /* initialize host controller */ + sata_rcar_init_controller(host); + + ret = ata_host_activate(host, irq, sata_rcar_interrupt, 0, + &sata_rcar_sht); + if (!ret) + return 0; + +cleanup: + clk_disable_unprepare(priv->clk); + + return ret; +} + +static int sata_rcar_remove(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + struct sata_rcar_priv *priv = host->private_data; + void __iomem *base = priv->base; + + ata_host_detach(host); + + /* disable interrupts */ + iowrite32(0, base + ATAPI_INT_ENABLE_REG); + /* ack and mask */ + iowrite32(0, base + SATAINTSTAT_REG); + iowrite32(0x7ff, base + SATAINTMASK_REG); + + clk_disable_unprepare(priv->clk); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sata_rcar_suspend(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct sata_rcar_priv *priv = host->private_data; + void __iomem *base = priv->base; + int ret; + + ret = ata_host_suspend(host, PMSG_SUSPEND); + if (!ret) { + /* disable interrupts */ + iowrite32(0, base + ATAPI_INT_ENABLE_REG); + /* mask */ + iowrite32(0x7ff, base + SATAINTMASK_REG); + + clk_disable_unprepare(priv->clk); + } + + return ret; +} + +static int sata_rcar_resume(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct sata_rcar_priv *priv = host->private_data; + void __iomem *base = priv->base; + + clk_prepare_enable(priv->clk); + + /* ack and mask */ + iowrite32(0, base + SATAINTSTAT_REG); + iowrite32(0x7ff, base + SATAINTMASK_REG); + /* enable interrupts */ + iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG); + + ata_host_resume(host); + + return 0; +} + +static int sata_rcar_restore(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct sata_rcar_priv *priv = host->private_data; + + clk_prepare_enable(priv->clk); + + sata_rcar_setup_port(host); + + /* initialize host controller */ + sata_rcar_init_controller(host); + + ata_host_resume(host); + + return 0; +} + +static const struct dev_pm_ops sata_rcar_pm_ops = { + .suspend = sata_rcar_suspend, + .resume = sata_rcar_resume, + .freeze = sata_rcar_suspend, + .thaw = sata_rcar_resume, + .poweroff = sata_rcar_suspend, + .restore = sata_rcar_restore, +}; +#endif + +static struct platform_driver sata_rcar_driver = { + .probe = sata_rcar_probe, + .remove = sata_rcar_remove, + .id_table = sata_rcar_id_table, + .driver = { + .name = DRV_NAME, + .of_match_table = sata_rcar_match, +#ifdef CONFIG_PM_SLEEP + .pm = &sata_rcar_pm_ops, +#endif + }, +}; + +module_platform_driver(sata_rcar_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Vladimir Barinov"); +MODULE_DESCRIPTION("Renesas R-Car SATA controller low level driver"); diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c new file mode 100644 index 000000000..dea6edcbf --- /dev/null +++ b/drivers/ata/sata_sil.c @@ -0,0 +1,822 @@ +/* + * sata_sil.c - Silicon Image SATA + * + * Maintained by: Tejun Heo + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2005 Red Hat, Inc. + * Copyright 2003 Benjamin Herrenschmidt + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Documentation for SiI 3112: + * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 + * + * Other errata and documentation available under NDA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_sil" +#define DRV_VERSION "2.4" + +#define SIL_DMA_BOUNDARY 0x7fffffffUL + +enum { + SIL_MMIO_BAR = 5, + + /* + * host flags + */ + SIL_FLAG_NO_SATA_IRQ = (1 << 28), + SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29), + SIL_FLAG_MOD15WRITE = (1 << 30), + + SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA, + + /* + * Controller IDs + */ + sil_3112 = 0, + sil_3112_no_sata_irq = 1, + sil_3512 = 2, + sil_3114 = 3, + + /* + * Register offsets + */ + SIL_SYSCFG = 0x48, + + /* + * Register bits + */ + /* SYSCFG */ + SIL_MASK_IDE0_INT = (1 << 22), + SIL_MASK_IDE1_INT = (1 << 23), + SIL_MASK_IDE2_INT = (1 << 24), + SIL_MASK_IDE3_INT = (1 << 25), + SIL_MASK_2PORT = SIL_MASK_IDE0_INT | SIL_MASK_IDE1_INT, + SIL_MASK_4PORT = SIL_MASK_2PORT | + SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT, + + /* BMDMA/BMDMA2 */ + SIL_INTR_STEERING = (1 << 1), + + SIL_DMA_ENABLE = (1 << 0), /* DMA run switch */ + SIL_DMA_RDWR = (1 << 3), /* DMA Rd-Wr */ + SIL_DMA_SATA_IRQ = (1 << 4), /* OR of all SATA IRQs */ + SIL_DMA_ACTIVE = (1 << 16), /* DMA running */ + SIL_DMA_ERROR = (1 << 17), /* PCI bus error */ + SIL_DMA_COMPLETE = (1 << 18), /* cmd complete / IRQ pending */ + SIL_DMA_N_SATA_IRQ = (1 << 6), /* SATA_IRQ for the next channel */ + SIL_DMA_N_ACTIVE = (1 << 24), /* ACTIVE for the next channel */ + SIL_DMA_N_ERROR = (1 << 25), /* ERROR for the next channel */ + SIL_DMA_N_COMPLETE = (1 << 26), /* COMPLETE for the next channel */ + + /* SIEN */ + SIL_SIEN_N = (1 << 16), /* triggered by SError.N */ + + /* + * Others + */ + SIL_QUIRK_MOD15WRITE = (1 << 0), + SIL_QUIRK_UDMA5MAX = (1 << 1), +}; + +static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +#ifdef CONFIG_PM_SLEEP +static int sil_pci_device_resume(struct pci_dev *pdev); +#endif +static void sil_dev_config(struct ata_device *dev); +static int sil_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); +static int sil_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed); +static void sil_qc_prep(struct ata_queued_cmd *qc); +static void sil_bmdma_setup(struct ata_queued_cmd *qc); +static void sil_bmdma_start(struct ata_queued_cmd *qc); +static void sil_bmdma_stop(struct ata_queued_cmd *qc); +static void sil_freeze(struct ata_port *ap); +static void sil_thaw(struct ata_port *ap); + + +static const struct pci_device_id sil_pci_tbl[] = { + { PCI_VDEVICE(CMD, 0x3112), sil_3112 }, + { PCI_VDEVICE(CMD, 0x0240), sil_3112 }, + { PCI_VDEVICE(CMD, 0x3512), sil_3512 }, + { PCI_VDEVICE(CMD, 0x3114), sil_3114 }, + { PCI_VDEVICE(ATI, 0x436e), sil_3112 }, + { PCI_VDEVICE(ATI, 0x4379), sil_3112_no_sata_irq }, + { PCI_VDEVICE(ATI, 0x437a), sil_3112_no_sata_irq }, + + { } /* terminate list */ +}; + + +/* TODO firmware versions should be added - eric */ +static const struct sil_drivelist { + const char *product; + unsigned int quirk; +} sil_blacklist [] = { + { "ST320012AS", SIL_QUIRK_MOD15WRITE }, + { "ST330013AS", SIL_QUIRK_MOD15WRITE }, + { "ST340017AS", SIL_QUIRK_MOD15WRITE }, + { "ST360015AS", SIL_QUIRK_MOD15WRITE }, + { "ST380023AS", SIL_QUIRK_MOD15WRITE }, + { "ST3120023AS", SIL_QUIRK_MOD15WRITE }, + { "ST340014ASL", SIL_QUIRK_MOD15WRITE }, + { "ST360014ASL", SIL_QUIRK_MOD15WRITE }, + { "ST380011ASL", SIL_QUIRK_MOD15WRITE }, + { "ST3120022ASL", SIL_QUIRK_MOD15WRITE }, + { "ST3160021ASL", SIL_QUIRK_MOD15WRITE }, + { "TOSHIBA MK2561GSYN", SIL_QUIRK_MOD15WRITE }, + { "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX }, + { } +}; + +static struct pci_driver sil_pci_driver = { + .name = DRV_NAME, + .id_table = sil_pci_tbl, + .probe = sil_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = sil_pci_device_resume, +#endif +}; + +static struct scsi_host_template sil_sht = { + ATA_BASE_SHT(DRV_NAME), + /** These controllers support Large Block Transfer which allows + transfer chunks up to 2GB and which cross 64KB boundaries, + therefore the DMA limits are more relaxed than standard ATA SFF. */ + .dma_boundary = SIL_DMA_BOUNDARY, + .sg_tablesize = ATA_MAX_PRD +}; + +static struct ata_port_operations sil_ops = { + .inherits = &ata_bmdma32_port_ops, + .dev_config = sil_dev_config, + .set_mode = sil_set_mode, + .bmdma_setup = sil_bmdma_setup, + .bmdma_start = sil_bmdma_start, + .bmdma_stop = sil_bmdma_stop, + .qc_prep = sil_qc_prep, + .freeze = sil_freeze, + .thaw = sil_thaw, + .scr_read = sil_scr_read, + .scr_write = sil_scr_write, +}; + +static const struct ata_port_info sil_port_info[] = { + /* sil_3112 */ + { + .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &sil_ops, + }, + /* sil_3112_no_sata_irq */ + { + .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE | + SIL_FLAG_NO_SATA_IRQ, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &sil_ops, + }, + /* sil_3512 */ + { + .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &sil_ops, + }, + /* sil_3114 */ + { + .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &sil_ops, + }, +}; + +/* per-port register offsets */ +/* TODO: we can probably calculate rather than use a table */ +static const struct { + unsigned long tf; /* ATA taskfile register block */ + unsigned long ctl; /* ATA control/altstatus register block */ + unsigned long bmdma; /* DMA register block */ + unsigned long bmdma2; /* DMA register block #2 */ + unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */ + unsigned long scr; /* SATA control register block */ + unsigned long sien; /* SATA Interrupt Enable register */ + unsigned long xfer_mode;/* data transfer mode register */ + unsigned long sfis_cfg; /* SATA FIS reception config register */ +} sil_port[] = { + /* port 0 ... */ + /* tf ctl bmdma bmdma2 fifo scr sien mode sfis */ + { 0x80, 0x8A, 0x0, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c }, + { 0xC0, 0xCA, 0x8, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc }, + { 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c }, + { 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc }, + /* ... port 3 */ +}; + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sil_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +static int slow_down; +module_param(slow_down, int, 0444); +MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)"); + + +static void sil_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; + void __iomem *bmdma2 = mmio_base + sil_port[ap->port_no].bmdma2; + + /* clear start/stop bit - can safely always write 0 */ + iowrite8(0, bmdma2); + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_sff_dma_pause(ap); +} + +static void sil_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *bmdma = ap->ioaddr.bmdma_addr; + + /* load PRD table addr. */ + iowrite32(ap->bmdma_prd_dma, bmdma + ATA_DMA_TABLE_OFS); + + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} + +static void sil_bmdma_start(struct ata_queued_cmd *qc) +{ + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + struct ata_port *ap = qc->ap; + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; + void __iomem *bmdma2 = mmio_base + sil_port[ap->port_no].bmdma2; + u8 dmactl = ATA_DMA_START; + + /* set transfer direction, start host DMA transaction + Note: For Large Block Transfer to work, the DMA must be started + using the bmdma2 register. */ + if (!rw) + dmactl |= ATA_DMA_WR; + iowrite8(dmactl, bmdma2); +} + +/* The way God intended PCI IDE scatter/gather lists to look and behave... */ +static void sil_fill_sg(struct ata_queued_cmd *qc) +{ + struct scatterlist *sg; + struct ata_port *ap = qc->ap; + struct ata_bmdma_prd *prd, *last_prd = NULL; + unsigned int si; + + prd = &ap->bmdma_prd[0]; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + /* Note h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + u32 addr = (u32) sg_dma_address(sg); + u32 sg_len = sg_dma_len(sg); + + prd->addr = cpu_to_le32(addr); + prd->flags_len = cpu_to_le32(sg_len); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", si, addr, sg_len); + + last_prd = prd; + prd++; + } + + if (likely(last_prd)) + last_prd->flags_len |= cpu_to_le32(ATA_PRD_EOT); +} + +static void sil_qc_prep(struct ata_queued_cmd *qc) +{ + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + sil_fill_sg(qc); +} + +static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) +{ + u8 cache_line = 0; + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line); + return cache_line; +} + +/** + * sil_set_mode - wrap set_mode functions + * @link: link to set up + * @r_failed: returned device when we fail + * + * Wrap the libata method for device setup as after the setup we need + * to inspect the results and do some configuration work + */ + +static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed) +{ + struct ata_port *ap = link->ap; + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; + void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode; + struct ata_device *dev; + u32 tmp, dev_mode[2] = { }; + int rc; + + rc = ata_do_set_mode(link, r_failed); + if (rc) + return rc; + + ata_for_each_dev(dev, link, ALL) { + if (!ata_dev_enabled(dev)) + dev_mode[dev->devno] = 0; /* PIO0/1/2 */ + else if (dev->flags & ATA_DFLAG_PIO) + dev_mode[dev->devno] = 1; /* PIO3/4 */ + else + dev_mode[dev->devno] = 3; /* UDMA */ + /* value 2 indicates MDMA */ + } + + tmp = readl(addr); + tmp &= ~((1<<5) | (1<<4) | (1<<1) | (1<<0)); + tmp |= dev_mode[0]; + tmp |= (dev_mode[1] << 4); + writel(tmp, addr); + readl(addr); /* flush */ + return 0; +} + +static inline void __iomem *sil_scr_addr(struct ata_port *ap, + unsigned int sc_reg) +{ + void __iomem *offset = ap->ioaddr.scr_addr; + + switch (sc_reg) { + case SCR_STATUS: + return offset + 4; + case SCR_ERROR: + return offset + 8; + case SCR_CONTROL: + return offset; + default: + /* do nothing */ + break; + } + + return NULL; +} + +static int sil_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) +{ + void __iomem *mmio = sil_scr_addr(link->ap, sc_reg); + + if (mmio) { + *val = readl(mmio); + return 0; + } + return -EINVAL; +} + +static int sil_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) +{ + void __iomem *mmio = sil_scr_addr(link->ap, sc_reg); + + if (mmio) { + writel(val, mmio); + return 0; + } + return -EINVAL; +} + +static void sil_host_intr(struct ata_port *ap, u32 bmdma2) +{ + struct ata_eh_info *ehi = &ap->link.eh_info; + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); + u8 status; + + if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) { + u32 serror = 0xffffffff; + + /* SIEN doesn't mask SATA IRQs on some 3112s. Those + * controllers continue to assert IRQ as long as + * SError bits are pending. Clear SError immediately. + */ + sil_scr_read(&ap->link, SCR_ERROR, &serror); + sil_scr_write(&ap->link, SCR_ERROR, serror); + + /* Sometimes spurious interrupts occur, double check + * it's PHYRDY CHG. + */ + if (serror & SERR_PHYRDY_CHG) { + ap->link.eh_info.serror |= serror; + goto freeze; + } + + if (!(bmdma2 & SIL_DMA_COMPLETE)) + return; + } + + if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { + /* this sometimes happens, just clear IRQ */ + ap->ops->sff_check_status(ap); + return; + } + + /* Check whether we are expecting interrupt in this state */ + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ + + /* Check the ATA_DFLAG_CDB_INTR flag is enough here. + * The flag was turned on only for atapi devices. No + * need to check ata_is_atapi(qc->tf.protocol) again. + */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + goto err_hsm; + break; + case HSM_ST_LAST: + if (ata_is_dma(qc->tf.protocol)) { + /* clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + if (bmdma2 & SIL_DMA_ERROR) { + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } + } + break; + case HSM_ST: + break; + default: + goto err_hsm; + } + + /* check main status, clearing INTRQ */ + status = ap->ops->sff_check_status(ap); + if (unlikely(status & ATA_BUSY)) + goto err_hsm; + + /* ack bmdma irq events */ + ata_bmdma_irq_clear(ap); + + /* kick HSM in the ass */ + ata_sff_hsm_move(ap, qc, status, 0); + + if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol)) + ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2); + + return; + + err_hsm: + qc->err_mask |= AC_ERR_HSM; + freeze: + ata_port_freeze(ap); +} + +static irqreturn_t sil_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR]; + int handled = 0; + int i; + + spin_lock(&host->lock); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2); + + /* turn off SATA_IRQ if not supported */ + if (ap->flags & SIL_FLAG_NO_SATA_IRQ) + bmdma2 &= ~SIL_DMA_SATA_IRQ; + + if (bmdma2 == 0xffffffff || + !(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ))) + continue; + + sil_host_intr(ap, bmdma2); + handled = 1; + } + + spin_unlock(&host->lock); + + return IRQ_RETVAL(handled); +} + +static void sil_freeze(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; + u32 tmp; + + /* global IRQ mask doesn't block SATA IRQ, turn off explicitly */ + writel(0, mmio_base + sil_port[ap->port_no].sien); + + /* plug IRQ */ + tmp = readl(mmio_base + SIL_SYSCFG); + tmp |= SIL_MASK_IDE0_INT << ap->port_no; + writel(tmp, mmio_base + SIL_SYSCFG); + readl(mmio_base + SIL_SYSCFG); /* flush */ + + /* Ensure DMA_ENABLE is off. + * + * This is because the controller will not give us access to the + * taskfile registers while a DMA is in progress + */ + iowrite8(ioread8(ap->ioaddr.bmdma_addr) & ~SIL_DMA_ENABLE, + ap->ioaddr.bmdma_addr); + + /* According to ata_bmdma_stop, an HDMA transition requires + * on PIO cycle. But we can't read a taskfile register. + */ + ioread8(ap->ioaddr.bmdma_addr); +} + +static void sil_thaw(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; + u32 tmp; + + /* clear IRQ */ + ap->ops->sff_check_status(ap); + ata_bmdma_irq_clear(ap); + + /* turn on SATA IRQ if supported */ + if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ)) + writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien); + + /* turn on IRQ */ + tmp = readl(mmio_base + SIL_SYSCFG); + tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no); + writel(tmp, mmio_base + SIL_SYSCFG); +} + +/** + * sil_dev_config - Apply device/host-specific errata fixups + * @dev: Device to be examined + * + * After the IDENTIFY [PACKET] DEVICE step is complete, and a + * device is known to be present, this function is called. + * We apply two errata fixups which are specific to Silicon Image, + * a Seagate and a Maxtor fixup. + * + * For certain Seagate devices, we must limit the maximum sectors + * to under 8K. + * + * For certain Maxtor devices, we must not program the drive + * beyond udma5. + * + * Both fixups are unfairly pessimistic. As soon as I get more + * information on these errata, I will create a more exhaustive + * list, and apply the fixups to only the specific + * devices/hosts/firmwares that need it. + * + * 20040111 - Seagate drives affected by the Mod15Write bug are blacklisted + * The Maxtor quirk is in the blacklist, but I'm keeping the original + * pessimistic fix for the following reasons... + * - There seems to be less info on it, only one device gleaned off the + * Windows driver, maybe only one is affected. More info would be greatly + * appreciated. + * - But then again UDMA5 is hardly anything to complain about + */ +static void sil_dev_config(struct ata_device *dev) +{ + struct ata_port *ap = dev->link->ap; + int print_info = ap->link.eh_context.i.flags & ATA_EHI_PRINTINFO; + unsigned int n, quirks = 0; + unsigned char model_num[ATA_ID_PROD_LEN + 1]; + + ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num)); + + for (n = 0; sil_blacklist[n].product; n++) + if (!strcmp(sil_blacklist[n].product, model_num)) { + quirks = sil_blacklist[n].quirk; + break; + } + + /* limit requests to 15 sectors */ + if (slow_down || + ((ap->flags & SIL_FLAG_MOD15WRITE) && + (quirks & SIL_QUIRK_MOD15WRITE))) { + if (print_info) + ata_dev_info(dev, + "applying Seagate errata fix (mod15write workaround)\n"); + dev->max_sectors = 15; + return; + } + + /* limit to udma5 */ + if (quirks & SIL_QUIRK_UDMA5MAX) { + if (print_info) + ata_dev_info(dev, "applying Maxtor errata fix %s\n", + model_num); + dev->udma_mask &= ATA_UDMA5; + return; + } +} + +static void sil_init_controller(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR]; + u8 cls; + u32 tmp; + int i; + + /* Initialize FIFO PCI bus arbitration */ + cls = sil_get_device_cache_line(pdev); + if (cls) { + cls >>= 3; + cls++; /* cls = (line_size/8)+1 */ + for (i = 0; i < host->n_ports; i++) + writew(cls << 8 | cls, + mmio_base + sil_port[i].fifo_cfg); + } else + dev_warn(&pdev->dev, + "cache line size not set. Driver may not function\n"); + + /* Apply R_ERR on DMA activate FIS errata workaround */ + if (host->ports[0]->flags & SIL_FLAG_RERR_ON_DMA_ACT) { + int cnt; + + for (i = 0, cnt = 0; i < host->n_ports; i++) { + tmp = readl(mmio_base + sil_port[i].sfis_cfg); + if ((tmp & 0x3) != 0x01) + continue; + if (!cnt) + dev_info(&pdev->dev, + "Applying R_ERR on DMA activate FIS errata fix\n"); + writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg); + cnt++; + } + } + + if (host->n_ports == 4) { + /* flip the magic "make 4 ports work" bit */ + tmp = readl(mmio_base + sil_port[2].bmdma); + if ((tmp & SIL_INTR_STEERING) == 0) + writel(tmp | SIL_INTR_STEERING, + mmio_base + sil_port[2].bmdma); + } +} + +static bool sil_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq nx6325", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x12UL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + +static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int board_id = ent->driver_data; + struct ata_port_info pi = sil_port_info[board_id]; + const struct ata_port_info *ppi[] = { &pi, NULL }; + struct ata_host *host; + void __iomem *mmio_base; + int n_ports, rc; + unsigned int i; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* allocate host */ + n_ports = 2; + if (board_id == sil_3114) + n_ports = 4; + + if (sil_broken_system_poweroff(pdev)) { + pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN | + ATA_FLAG_NO_HIBERNATE_SPINDOWN; + dev_info(&pdev->dev, "quirky BIOS, skipping spindown " + "on poweroff and hibernation\n"); + } + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + if (!host) + return -ENOMEM; + + /* acquire resources and fill host */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + rc = pcim_iomap_regions(pdev, 1 << SIL_MMIO_BAR, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + host->iomap = pcim_iomap_table(pdev); + + rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + + mmio_base = host->iomap[SIL_MMIO_BAR]; + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + struct ata_ioports *ioaddr = &ap->ioaddr; + + ioaddr->cmd_addr = mmio_base + sil_port[i].tf; + ioaddr->altstatus_addr = + ioaddr->ctl_addr = mmio_base + sil_port[i].ctl; + ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma; + ioaddr->scr_addr = mmio_base + sil_port[i].scr; + ata_sff_std_ports(ioaddr); + + ata_port_pbar_desc(ap, SIL_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, SIL_MMIO_BAR, sil_port[i].tf, "tf"); + } + + /* initialize and activate */ + sil_init_controller(host); + + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, sil_interrupt, IRQF_SHARED, + &sil_sht); +} + +#ifdef CONFIG_PM_SLEEP +static int sil_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + sil_init_controller(host); + ata_host_resume(host); + + return 0; +} +#endif + +module_pci_driver(sil_pci_driver); diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c new file mode 100644 index 000000000..4b1995e2d --- /dev/null +++ b/drivers/ata/sata_sil24.c @@ -0,0 +1,1391 @@ +/* + * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers + * + * Copyright 2005 Tejun Heo + * + * Based on preview driver from Silicon Image. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_sil24" +#define DRV_VERSION "1.1" + +/* + * Port request block (PRB) 32 bytes + */ +struct sil24_prb { + __le16 ctrl; + __le16 prot; + __le32 rx_cnt; + u8 fis[6 * 4]; +}; + +/* + * Scatter gather entry (SGE) 16 bytes + */ +struct sil24_sge { + __le64 addr; + __le32 cnt; + __le32 flags; +}; + + +enum { + SIL24_HOST_BAR = 0, + SIL24_PORT_BAR = 2, + + /* sil24 fetches in chunks of 64bytes. The first block + * contains the PRB and two SGEs. From the second block, it's + * consisted of four SGEs and called SGT. Calculate the + * number of SGTs that fit into one page. + */ + SIL24_PRB_SZ = sizeof(struct sil24_prb) + + 2 * sizeof(struct sil24_sge), + SIL24_MAX_SGT = (PAGE_SIZE - SIL24_PRB_SZ) + / (4 * sizeof(struct sil24_sge)), + + /* This will give us one unused SGEs for ATA. This extra SGE + * will be used to store CDB for ATAPI devices. + */ + SIL24_MAX_SGE = 4 * SIL24_MAX_SGT + 1, + + /* + * Global controller registers (128 bytes @ BAR0) + */ + /* 32 bit regs */ + HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */ + HOST_CTRL = 0x40, + HOST_IRQ_STAT = 0x44, + HOST_PHY_CFG = 0x48, + HOST_BIST_CTRL = 0x50, + HOST_BIST_PTRN = 0x54, + HOST_BIST_STAT = 0x58, + HOST_MEM_BIST_STAT = 0x5c, + HOST_FLASH_CMD = 0x70, + /* 8 bit regs */ + HOST_FLASH_DATA = 0x74, + HOST_TRANSITION_DETECT = 0x75, + HOST_GPIO_CTRL = 0x76, + HOST_I2C_ADDR = 0x78, /* 32 bit */ + HOST_I2C_DATA = 0x7c, + HOST_I2C_XFER_CNT = 0x7e, + HOST_I2C_CTRL = 0x7f, + + /* HOST_SLOT_STAT bits */ + HOST_SSTAT_ATTN = (1 << 31), + + /* HOST_CTRL bits */ + HOST_CTRL_M66EN = (1 << 16), /* M66EN PCI bus signal */ + HOST_CTRL_TRDY = (1 << 17), /* latched PCI TRDY */ + HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */ + HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */ + HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */ + HOST_CTRL_GLOBAL_RST = (1 << 31), /* global reset */ + + /* + * Port registers + * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2) + */ + PORT_REGS_SIZE = 0x2000, + + PORT_LRAM = 0x0000, /* 31 LRAM slots and PMP regs */ + PORT_LRAM_SLOT_SZ = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */ + + PORT_PMP = 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */ + PORT_PMP_STATUS = 0x0000, /* port device status offset */ + PORT_PMP_QACTIVE = 0x0004, /* port device QActive offset */ + PORT_PMP_SIZE = 0x0008, /* 8 bytes per PMP */ + + /* 32 bit regs */ + PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */ + PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */ + PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */ + PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */ + PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */ + PORT_ACTIVATE_UPPER_ADDR= 0x101c, + PORT_EXEC_FIFO = 0x1020, /* command execution fifo */ + PORT_CMD_ERR = 0x1024, /* command error number */ + PORT_FIS_CFG = 0x1028, + PORT_FIFO_THRES = 0x102c, + /* 16 bit regs */ + PORT_DECODE_ERR_CNT = 0x1040, + PORT_DECODE_ERR_THRESH = 0x1042, + PORT_CRC_ERR_CNT = 0x1044, + PORT_CRC_ERR_THRESH = 0x1046, + PORT_HSHK_ERR_CNT = 0x1048, + PORT_HSHK_ERR_THRESH = 0x104a, + /* 32 bit regs */ + PORT_PHY_CFG = 0x1050, + PORT_SLOT_STAT = 0x1800, + PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */ + PORT_CONTEXT = 0x1e04, + PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */ + PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */ + PORT_SCONTROL = 0x1f00, + PORT_SSTATUS = 0x1f04, + PORT_SERROR = 0x1f08, + PORT_SACTIVE = 0x1f0c, + + /* PORT_CTRL_STAT bits */ + PORT_CS_PORT_RST = (1 << 0), /* port reset */ + PORT_CS_DEV_RST = (1 << 1), /* device reset */ + PORT_CS_INIT = (1 << 2), /* port initialize */ + PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ + PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */ + PORT_CS_PMP_RESUME = (1 << 6), /* PMP resume */ + PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */ + PORT_CS_PMP_EN = (1 << 13), /* port multiplier enable */ + PORT_CS_RDY = (1 << 31), /* port ready to accept commands */ + + /* PORT_IRQ_STAT/ENABLE_SET/CLR */ + /* bits[11:0] are masked */ + PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */ + PORT_IRQ_ERROR = (1 << 1), /* command execution error */ + PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */ + PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */ + PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */ + PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */ + PORT_IRQ_UNK_FIS = (1 << 6), /* unknown FIS received */ + PORT_IRQ_DEV_XCHG = (1 << 7), /* device exchanged */ + PORT_IRQ_8B10B = (1 << 8), /* 8b/10b decode error threshold */ + PORT_IRQ_CRC = (1 << 9), /* CRC error threshold */ + PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */ + PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */ + + DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | + PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG | + PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_NOTIFY, + + /* bits[27:16] are unmasked (raw) */ + PORT_IRQ_RAW_SHIFT = 16, + PORT_IRQ_MASKED_MASK = 0x7ff, + PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT), + + /* ENABLE_SET/CLR specific, intr steering - 2 bit field */ + PORT_IRQ_STEER_SHIFT = 30, + PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT), + + /* PORT_CMD_ERR constants */ + PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */ + PORT_CERR_SDB = 2, /* Error bit in SDB FIS */ + PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */ + PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */ + PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */ + PORT_CERR_DIRECTION = 6, /* Data direction mismatch */ + PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */ + PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */ + PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */ + PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */ + PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */ + PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */ + PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */ + PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */ + PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */ + PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */ + PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */ + PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */ + PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */ + PORT_CERR_XFR_MSTABRT = 34, /* PSD ecode 10 - master abort */ + PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ + PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */ + + /* bits of PRB control field */ + PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */ + PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */ + PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */ + PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */ + PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */ + + /* PRB protocol field */ + PRB_PROT_PACKET = (1 << 0), + PRB_PROT_TCQ = (1 << 1), + PRB_PROT_NCQ = (1 << 2), + PRB_PROT_READ = (1 << 3), + PRB_PROT_WRITE = (1 << 4), + PRB_PROT_TRANSPARENT = (1 << 5), + + /* + * Other constants + */ + SGE_TRM = (1 << 31), /* Last SGE in chain */ + SGE_LNK = (1 << 30), /* linked list + Points to SGT, not SGE */ + SGE_DRD = (1 << 29), /* discard data read (/dev/null) + data address ignored */ + + SIL24_MAX_CMDS = 31, + + /* board id */ + BID_SIL3124 = 0, + BID_SIL3132 = 1, + BID_SIL3131 = 2, + + /* host flags */ + SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | + ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA | + ATA_FLAG_AN | ATA_FLAG_PMP, + SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */ + + IRQ_STAT_4PORTS = 0xf, +}; + +struct sil24_ata_block { + struct sil24_prb prb; + struct sil24_sge sge[SIL24_MAX_SGE]; +}; + +struct sil24_atapi_block { + struct sil24_prb prb; + u8 cdb[16]; + struct sil24_sge sge[SIL24_MAX_SGE]; +}; + +union sil24_cmd_block { + struct sil24_ata_block ata; + struct sil24_atapi_block atapi; +}; + +static const struct sil24_cerr_info { + unsigned int err_mask, action; + const char *desc; +} sil24_cerr_db[] = { + [0] = { AC_ERR_DEV, 0, + "device error" }, + [PORT_CERR_DEV] = { AC_ERR_DEV, 0, + "device error via D2H FIS" }, + [PORT_CERR_SDB] = { AC_ERR_DEV, 0, + "device error via SDB FIS" }, + [PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_RESET, + "error in data FIS" }, + [PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_RESET, + "failed to transmit command FIS" }, + [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_RESET, + "protocol mismatch" }, + [PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_RESET, + "data directon mismatch" }, + [PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_RESET, + "ran out of SGEs while writing" }, + [PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_RESET, + "ran out of SGEs while reading" }, + [PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_RESET, + "invalid data directon for ATAPI CDB" }, + [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET, + "SGT not on qword boundary" }, + [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET, + "PCI target abort while fetching SGT" }, + [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET, + "PCI master abort while fetching SGT" }, + [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET, + "PCI parity error while fetching SGT" }, + [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET, + "PRB not on qword boundary" }, + [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET, + "PCI target abort while fetching PRB" }, + [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET, + "PCI master abort while fetching PRB" }, + [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET, + "PCI parity error while fetching PRB" }, + [PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_RESET, + "undefined error while transferring data" }, + [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET, + "PCI target abort while transferring data" }, + [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET, + "PCI master abort while transferring data" }, + [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET, + "PCI parity error while transferring data" }, + [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_RESET, + "FIS received while sending service FIS" }, +}; + +/* + * ap->private_data + * + * The preview driver always returned 0 for status. We emulate it + * here from the previous interrupt. + */ +struct sil24_port_priv { + union sil24_cmd_block *cmd_block; /* 32 cmd blocks */ + dma_addr_t cmd_block_dma; /* DMA base addr for them */ + int do_port_rst; +}; + +static void sil24_dev_config(struct ata_device *dev); +static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val); +static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val); +static int sil24_qc_defer(struct ata_queued_cmd *qc); +static void sil24_qc_prep(struct ata_queued_cmd *qc); +static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc); +static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc); +static void sil24_pmp_attach(struct ata_port *ap); +static void sil24_pmp_detach(struct ata_port *ap); +static void sil24_freeze(struct ata_port *ap); +static void sil24_thaw(struct ata_port *ap); +static int sil24_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static int sil24_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static void sil24_error_handler(struct ata_port *ap); +static void sil24_post_internal_cmd(struct ata_queued_cmd *qc); +static int sil24_port_start(struct ata_port *ap); +static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +#ifdef CONFIG_PM_SLEEP +static int sil24_pci_device_resume(struct pci_dev *pdev); +#endif +#ifdef CONFIG_PM +static int sil24_port_resume(struct ata_port *ap); +#endif + +static const struct pci_device_id sil24_pci_tbl[] = { + { PCI_VDEVICE(CMD, 0x3124), BID_SIL3124 }, + { PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 }, + { PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 }, + { PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 }, + { PCI_VDEVICE(CMD, 0x0244), BID_SIL3132 }, + { PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 }, + { PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 }, + + { } /* terminate list */ +}; + +static struct pci_driver sil24_pci_driver = { + .name = DRV_NAME, + .id_table = sil24_pci_tbl, + .probe = sil24_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = sil24_pci_device_resume, +#endif +}; + +static struct scsi_host_template sil24_sht = { + ATA_NCQ_SHT(DRV_NAME), + .can_queue = SIL24_MAX_CMDS, + .sg_tablesize = SIL24_MAX_SGE, + .dma_boundary = ATA_DMA_BOUNDARY, + .tag_alloc_policy = BLK_TAG_ALLOC_FIFO, +}; + +static struct ata_port_operations sil24_ops = { + .inherits = &sata_pmp_port_ops, + + .qc_defer = sil24_qc_defer, + .qc_prep = sil24_qc_prep, + .qc_issue = sil24_qc_issue, + .qc_fill_rtf = sil24_qc_fill_rtf, + + .freeze = sil24_freeze, + .thaw = sil24_thaw, + .softreset = sil24_softreset, + .hardreset = sil24_hardreset, + .pmp_softreset = sil24_softreset, + .pmp_hardreset = sil24_pmp_hardreset, + .error_handler = sil24_error_handler, + .post_internal_cmd = sil24_post_internal_cmd, + .dev_config = sil24_dev_config, + + .scr_read = sil24_scr_read, + .scr_write = sil24_scr_write, + .pmp_attach = sil24_pmp_attach, + .pmp_detach = sil24_pmp_detach, + + .port_start = sil24_port_start, +#ifdef CONFIG_PM + .port_resume = sil24_port_resume, +#endif +}; + +static bool sata_sil24_msi; /* Disable MSI */ +module_param_named(msi, sata_sil24_msi, bool, S_IRUGO); +MODULE_PARM_DESC(msi, "Enable MSI (Default: false)"); + +/* + * Use bits 30-31 of port_flags to encode available port numbers. + * Current maxium is 4. + */ +#define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30) +#define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1) + +static const struct ata_port_info sil24_port_info[] = { + /* sil_3124 */ + { + .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) | + SIL24_FLAG_PCIX_IRQ_WOC, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &sil24_ops, + }, + /* sil_3132 */ + { + .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2), + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &sil24_ops, + }, + /* sil_3131/sil_3531 */ + { + .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1), + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &sil24_ops, + }, +}; + +static int sil24_tag(int tag) +{ + if (unlikely(ata_tag_internal(tag))) + return 0; + return tag; +} + +static unsigned long sil24_port_offset(struct ata_port *ap) +{ + return ap->port_no * PORT_REGS_SIZE; +} + +static void __iomem *sil24_port_base(struct ata_port *ap) +{ + return ap->host->iomap[SIL24_PORT_BAR] + sil24_port_offset(ap); +} + +static void sil24_dev_config(struct ata_device *dev) +{ + void __iomem *port = sil24_port_base(dev->link->ap); + + if (dev->cdb_len == 16) + writel(PORT_CS_CDB16, port + PORT_CTRL_STAT); + else + writel(PORT_CS_CDB16, port + PORT_CTRL_CLR); +} + +static void sil24_read_tf(struct ata_port *ap, int tag, struct ata_taskfile *tf) +{ + void __iomem *port = sil24_port_base(ap); + struct sil24_prb __iomem *prb; + u8 fis[6 * 4]; + + prb = port + PORT_LRAM + sil24_tag(tag) * PORT_LRAM_SLOT_SZ; + memcpy_fromio(fis, prb->fis, sizeof(fis)); + ata_tf_from_fis(fis, tf); +} + +static int sil24_scr_map[] = { + [SCR_CONTROL] = 0, + [SCR_STATUS] = 1, + [SCR_ERROR] = 2, + [SCR_ACTIVE] = 3, +}; + +static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val) +{ + void __iomem *scr_addr = sil24_port_base(link->ap) + PORT_SCONTROL; + + if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { + *val = readl(scr_addr + sil24_scr_map[sc_reg] * 4); + return 0; + } + return -EINVAL; +} + +static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val) +{ + void __iomem *scr_addr = sil24_port_base(link->ap) + PORT_SCONTROL; + + if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { + writel(val, scr_addr + sil24_scr_map[sc_reg] * 4); + return 0; + } + return -EINVAL; +} + +static void sil24_config_port(struct ata_port *ap) +{ + void __iomem *port = sil24_port_base(ap); + + /* configure IRQ WoC */ + if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); + else + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + + /* zero error counters. */ + writew(0x8000, port + PORT_DECODE_ERR_THRESH); + writew(0x8000, port + PORT_CRC_ERR_THRESH); + writew(0x8000, port + PORT_HSHK_ERR_THRESH); + writew(0x0000, port + PORT_DECODE_ERR_CNT); + writew(0x0000, port + PORT_CRC_ERR_CNT); + writew(0x0000, port + PORT_HSHK_ERR_CNT); + + /* always use 64bit activation */ + writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); + + /* clear port multiplier enable and resume bits */ + writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR); +} + +static void sil24_config_pmp(struct ata_port *ap, int attached) +{ + void __iomem *port = sil24_port_base(ap); + + if (attached) + writel(PORT_CS_PMP_EN, port + PORT_CTRL_STAT); + else + writel(PORT_CS_PMP_EN, port + PORT_CTRL_CLR); +} + +static void sil24_clear_pmp(struct ata_port *ap) +{ + void __iomem *port = sil24_port_base(ap); + int i; + + writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR); + + for (i = 0; i < SATA_PMP_MAX_PORTS; i++) { + void __iomem *pmp_base = port + PORT_PMP + i * PORT_PMP_SIZE; + + writel(0, pmp_base + PORT_PMP_STATUS); + writel(0, pmp_base + PORT_PMP_QACTIVE); + } +} + +static int sil24_init_port(struct ata_port *ap) +{ + void __iomem *port = sil24_port_base(ap); + struct sil24_port_priv *pp = ap->private_data; + u32 tmp; + + /* clear PMP error status */ + if (sata_pmp_attached(ap)) + sil24_clear_pmp(ap); + + writel(PORT_CS_INIT, port + PORT_CTRL_STAT); + ata_wait_register(ap, port + PORT_CTRL_STAT, + PORT_CS_INIT, PORT_CS_INIT, 10, 100); + tmp = ata_wait_register(ap, port + PORT_CTRL_STAT, + PORT_CS_RDY, 0, 10, 100); + + if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) { + pp->do_port_rst = 1; + ap->link.eh_context.i.action |= ATA_EH_RESET; + return -EIO; + } + + return 0; +} + +static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp, + const struct ata_taskfile *tf, + int is_cmd, u32 ctrl, + unsigned long timeout_msec) +{ + void __iomem *port = sil24_port_base(ap); + struct sil24_port_priv *pp = ap->private_data; + struct sil24_prb *prb = &pp->cmd_block[0].ata.prb; + dma_addr_t paddr = pp->cmd_block_dma; + u32 irq_enabled, irq_mask, irq_stat; + int rc; + + prb->ctrl = cpu_to_le16(ctrl); + ata_tf_to_fis(tf, pmp, is_cmd, prb->fis); + + /* temporarily plug completion and error interrupts */ + irq_enabled = readl(port + PORT_IRQ_ENABLE_SET); + writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR); + + /* + * The barrier is required to ensure that writes to cmd_block reach + * the memory before the write to PORT_CMD_ACTIVATE. + */ + wmb(); + writel((u32)paddr, port + PORT_CMD_ACTIVATE); + writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4); + + irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT; + irq_stat = ata_wait_register(ap, port + PORT_IRQ_STAT, irq_mask, 0x0, + 10, timeout_msec); + + writel(irq_mask, port + PORT_IRQ_STAT); /* clear IRQs */ + irq_stat >>= PORT_IRQ_RAW_SHIFT; + + if (irq_stat & PORT_IRQ_COMPLETE) + rc = 0; + else { + /* force port into known state */ + sil24_init_port(ap); + + if (irq_stat & PORT_IRQ_ERROR) + rc = -EIO; + else + rc = -EBUSY; + } + + /* restore IRQ enabled */ + writel(irq_enabled, port + PORT_IRQ_ENABLE_SET); + + return rc; +} + +static int sil24_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + int pmp = sata_srst_pmp(link); + unsigned long timeout_msec = 0; + struct ata_taskfile tf; + const char *reason; + int rc; + + DPRINTK("ENTER\n"); + + /* put the port into known state */ + if (sil24_init_port(ap)) { + reason = "port not ready"; + goto err; + } + + /* do SRST */ + if (time_after(deadline, jiffies)) + timeout_msec = jiffies_to_msecs(deadline - jiffies); + + ata_tf_init(link->device, &tf); /* doesn't really matter */ + rc = sil24_exec_polled_cmd(ap, pmp, &tf, 0, PRB_CTRL_SRST, + timeout_msec); + if (rc == -EBUSY) { + reason = "timeout"; + goto err; + } else if (rc) { + reason = "SRST command error"; + goto err; + } + + sil24_read_tf(ap, 0, &tf); + *class = ata_dev_classify(&tf); + + DPRINTK("EXIT, class=%u\n", *class); + return 0; + + err: + ata_link_err(link, "softreset failed (%s)\n", reason); + return -EIO; +} + +static int sil24_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + void __iomem *port = sil24_port_base(ap); + struct sil24_port_priv *pp = ap->private_data; + int did_port_rst = 0; + const char *reason; + int tout_msec, rc; + u32 tmp; + + retry: + /* Sometimes, DEV_RST is not enough to recover the controller. + * This happens often after PM DMA CS errata. + */ + if (pp->do_port_rst) { + ata_port_warn(ap, + "controller in dubious state, performing PORT_RST\n"); + + writel(PORT_CS_PORT_RST, port + PORT_CTRL_STAT); + ata_msleep(ap, 10); + writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); + ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_RDY, 0, + 10, 5000); + + /* restore port configuration */ + sil24_config_port(ap); + sil24_config_pmp(ap, ap->nr_pmp_links); + + pp->do_port_rst = 0; + did_port_rst = 1; + } + + /* sil24 does the right thing(tm) without any protection */ + sata_set_spd(link); + + tout_msec = 100; + if (ata_link_online(link)) + tout_msec = 5000; + + writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); + tmp = ata_wait_register(ap, port + PORT_CTRL_STAT, + PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, + tout_msec); + + /* SStatus oscillates between zero and valid status after + * DEV_RST, debounce it. + */ + rc = sata_link_debounce(link, sata_deb_timing_long, deadline); + if (rc) { + reason = "PHY debouncing failed"; + goto err; + } + + if (tmp & PORT_CS_DEV_RST) { + if (ata_link_offline(link)) + return 0; + reason = "link not ready"; + goto err; + } + + /* Sil24 doesn't store signature FIS after hardreset, so we + * can't wait for BSY to clear. Some devices take a long time + * to get ready and those devices will choke if we don't wait + * for BSY clearance here. Tell libata to perform follow-up + * softreset. + */ + return -EAGAIN; + + err: + if (!did_port_rst) { + pp->do_port_rst = 1; + goto retry; + } + + ata_link_err(link, "hardreset failed (%s)\n", reason); + return -EIO; +} + +static inline void sil24_fill_sg(struct ata_queued_cmd *qc, + struct sil24_sge *sge) +{ + struct scatterlist *sg; + struct sil24_sge *last_sge = NULL; + unsigned int si; + + for_each_sg(qc->sg, sg, qc->n_elem, si) { + sge->addr = cpu_to_le64(sg_dma_address(sg)); + sge->cnt = cpu_to_le32(sg_dma_len(sg)); + sge->flags = 0; + + last_sge = sge; + sge++; + } + + last_sge->flags = cpu_to_le32(SGE_TRM); +} + +static int sil24_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_link *link = qc->dev->link; + struct ata_port *ap = link->ap; + u8 prot = qc->tf.protocol; + + /* + * There is a bug in the chip: + * Port LRAM Causes the PRB/SGT Data to be Corrupted + * If the host issues a read request for LRAM and SActive registers + * while active commands are available in the port, PRB/SGT data in + * the LRAM can become corrupted. This issue applies only when + * reading from, but not writing to, the LRAM. + * + * Therefore, reading LRAM when there is no particular error [and + * other commands may be outstanding] is prohibited. + * + * To avoid this bug there are two situations where a command must run + * exclusive of any other commands on the port: + * + * - ATAPI commands which check the sense data + * - Passthrough ATA commands which always have ATA_QCFLAG_RESULT_TF + * set. + * + */ + int is_excl = (ata_is_atapi(prot) || + (qc->flags & ATA_QCFLAG_RESULT_TF)); + + if (unlikely(ap->excl_link)) { + if (link == ap->excl_link) { + if (ap->nr_active_links) + return ATA_DEFER_PORT; + qc->flags |= ATA_QCFLAG_CLEAR_EXCL; + } else + return ATA_DEFER_PORT; + } else if (unlikely(is_excl)) { + ap->excl_link = link; + if (ap->nr_active_links) + return ATA_DEFER_PORT; + qc->flags |= ATA_QCFLAG_CLEAR_EXCL; + } + + return ata_std_qc_defer(qc); +} + +static void sil24_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sil24_port_priv *pp = ap->private_data; + union sil24_cmd_block *cb; + struct sil24_prb *prb; + struct sil24_sge *sge; + u16 ctrl = 0; + + cb = &pp->cmd_block[sil24_tag(qc->tag)]; + + if (!ata_is_atapi(qc->tf.protocol)) { + prb = &cb->ata.prb; + sge = cb->ata.sge; + if (ata_is_data(qc->tf.protocol)) { + u16 prot = 0; + ctrl = PRB_CTRL_PROTOCOL; + if (ata_is_ncq(qc->tf.protocol)) + prot |= PRB_PROT_NCQ; + if (qc->tf.flags & ATA_TFLAG_WRITE) + prot |= PRB_PROT_WRITE; + else + prot |= PRB_PROT_READ; + prb->prot = cpu_to_le16(prot); + } + } else { + prb = &cb->atapi.prb; + sge = cb->atapi.sge; + memset(cb->atapi.cdb, 0, sizeof(cb->atapi.cdb)); + memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len); + + if (ata_is_data(qc->tf.protocol)) { + if (qc->tf.flags & ATA_TFLAG_WRITE) + ctrl = PRB_CTRL_PACKET_WRITE; + else + ctrl = PRB_CTRL_PACKET_READ; + } + } + + prb->ctrl = cpu_to_le16(ctrl); + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, prb->fis); + + if (qc->flags & ATA_QCFLAG_DMAMAP) + sil24_fill_sg(qc, sge); +} + +static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sil24_port_priv *pp = ap->private_data; + void __iomem *port = sil24_port_base(ap); + unsigned int tag = sil24_tag(qc->tag); + dma_addr_t paddr; + void __iomem *activate; + + paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block); + activate = port + PORT_CMD_ACTIVATE + tag * 8; + + /* + * The barrier is required to ensure that writes to cmd_block reach + * the memory before the write to PORT_CMD_ACTIVATE. + */ + wmb(); + writel((u32)paddr, activate); + writel((u64)paddr >> 32, activate + 4); + + return 0; +} + +static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc) +{ + sil24_read_tf(qc->ap, qc->tag, &qc->result_tf); + return true; +} + +static void sil24_pmp_attach(struct ata_port *ap) +{ + u32 *gscr = ap->link.device->gscr; + + sil24_config_pmp(ap, 1); + sil24_init_port(ap); + + if (sata_pmp_gscr_vendor(gscr) == 0x11ab && + sata_pmp_gscr_devid(gscr) == 0x4140) { + ata_port_info(ap, + "disabling NCQ support due to sil24-mv4140 quirk\n"); + ap->flags &= ~ATA_FLAG_NCQ; + } +} + +static void sil24_pmp_detach(struct ata_port *ap) +{ + sil24_init_port(ap); + sil24_config_pmp(ap, 0); + + ap->flags |= ATA_FLAG_NCQ; +} + +static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int rc; + + rc = sil24_init_port(link->ap); + if (rc) { + ata_link_err(link, "hardreset failed (port not ready)\n"); + return rc; + } + + return sata_std_hardreset(link, class, deadline); +} + +static void sil24_freeze(struct ata_port *ap) +{ + void __iomem *port = sil24_port_base(ap); + + /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear + * PORT_IRQ_ENABLE instead. + */ + writel(0xffff, port + PORT_IRQ_ENABLE_CLR); +} + +static void sil24_thaw(struct ata_port *ap) +{ + void __iomem *port = sil24_port_base(ap); + u32 tmp; + + /* clear IRQ */ + tmp = readl(port + PORT_IRQ_STAT); + writel(tmp, port + PORT_IRQ_STAT); + + /* turn IRQ back on */ + writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET); +} + +static void sil24_error_intr(struct ata_port *ap) +{ + void __iomem *port = sil24_port_base(ap); + struct sil24_port_priv *pp = ap->private_data; + struct ata_queued_cmd *qc = NULL; + struct ata_link *link; + struct ata_eh_info *ehi; + int abort = 0, freeze = 0; + u32 irq_stat; + + /* on error, we need to clear IRQ explicitly */ + irq_stat = readl(port + PORT_IRQ_STAT); + writel(irq_stat, port + PORT_IRQ_STAT); + + /* first, analyze and record host port events */ + link = &ap->link; + ehi = &link->eh_info; + ata_ehi_clear_desc(ehi); + + ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); + + if (irq_stat & PORT_IRQ_SDB_NOTIFY) { + ata_ehi_push_desc(ehi, "SDB notify"); + sata_async_notification(ap); + } + + if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) { + ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, "%s", + irq_stat & PORT_IRQ_PHYRDY_CHG ? + "PHY RDY changed" : "device exchanged"); + freeze = 1; + } + + if (irq_stat & PORT_IRQ_UNK_FIS) { + ehi->err_mask |= AC_ERR_HSM; + ehi->action |= ATA_EH_RESET; + ata_ehi_push_desc(ehi, "unknown FIS"); + freeze = 1; + } + + /* deal with command error */ + if (irq_stat & PORT_IRQ_ERROR) { + const struct sil24_cerr_info *ci = NULL; + unsigned int err_mask = 0, action = 0; + u32 context, cerr; + int pmp; + + abort = 1; + + /* DMA Context Switch Failure in Port Multiplier Mode + * errata. If we have active commands to 3 or more + * devices, any error condition on active devices can + * corrupt DMA context switching. + */ + if (ap->nr_active_links >= 3) { + ehi->err_mask |= AC_ERR_OTHER; + ehi->action |= ATA_EH_RESET; + ata_ehi_push_desc(ehi, "PMP DMA CS errata"); + pp->do_port_rst = 1; + freeze = 1; + } + + /* find out the offending link and qc */ + if (sata_pmp_attached(ap)) { + context = readl(port + PORT_CONTEXT); + pmp = (context >> 5) & 0xf; + + if (pmp < ap->nr_pmp_links) { + link = &ap->pmp_link[pmp]; + ehi = &link->eh_info; + qc = ata_qc_from_tag(ap, link->active_tag); + + ata_ehi_clear_desc(ehi); + ata_ehi_push_desc(ehi, "irq_stat 0x%08x", + irq_stat); + } else { + err_mask |= AC_ERR_HSM; + action |= ATA_EH_RESET; + freeze = 1; + } + } else + qc = ata_qc_from_tag(ap, link->active_tag); + + /* analyze CMD_ERR */ + cerr = readl(port + PORT_CMD_ERR); + if (cerr < ARRAY_SIZE(sil24_cerr_db)) + ci = &sil24_cerr_db[cerr]; + + if (ci && ci->desc) { + err_mask |= ci->err_mask; + action |= ci->action; + if (action & ATA_EH_RESET) + freeze = 1; + ata_ehi_push_desc(ehi, "%s", ci->desc); + } else { + err_mask |= AC_ERR_OTHER; + action |= ATA_EH_RESET; + freeze = 1; + ata_ehi_push_desc(ehi, "unknown command error %d", + cerr); + } + + /* record error info */ + if (qc) + qc->err_mask |= err_mask; + else + ehi->err_mask |= err_mask; + + ehi->action |= action; + + /* if PMP, resume */ + if (sata_pmp_attached(ap)) + writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_STAT); + } + + /* freeze or abort */ + if (freeze) + ata_port_freeze(ap); + else if (abort) { + if (qc) + ata_link_abort(qc->dev->link); + else + ata_port_abort(ap); + } +} + +static inline void sil24_host_intr(struct ata_port *ap) +{ + void __iomem *port = sil24_port_base(ap); + u32 slot_stat, qc_active; + int rc; + + /* If PCIX_IRQ_WOC, there's an inherent race window between + * clearing IRQ pending status and reading PORT_SLOT_STAT + * which may cause spurious interrupts afterwards. This is + * unavoidable and much better than losing interrupts which + * happens if IRQ pending is cleared after reading + * PORT_SLOT_STAT. + */ + if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); + + slot_stat = readl(port + PORT_SLOT_STAT); + + if (unlikely(slot_stat & HOST_SSTAT_ATTN)) { + sil24_error_intr(ap); + return; + } + + qc_active = slot_stat & ~HOST_SSTAT_ATTN; + rc = ata_qc_complete_multiple(ap, qc_active); + if (rc > 0) + return; + if (rc < 0) { + struct ata_eh_info *ehi = &ap->link.eh_info; + ehi->err_mask |= AC_ERR_HSM; + ehi->action |= ATA_EH_RESET; + ata_port_freeze(ap); + return; + } + + /* spurious interrupts are expected if PCIX_IRQ_WOC */ + if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit()) + ata_port_info(ap, + "spurious interrupt (slot_stat 0x%x active_tag %d sactive 0x%x)\n", + slot_stat, ap->link.active_tag, ap->link.sactive); +} + +static irqreturn_t sil24_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + void __iomem *host_base = host->iomap[SIL24_HOST_BAR]; + unsigned handled = 0; + u32 status; + int i; + + status = readl(host_base + HOST_IRQ_STAT); + + if (status == 0xffffffff) { + dev_err(host->dev, "IRQ status == 0xffffffff, " + "PCI fault or device removal?\n"); + goto out; + } + + if (!(status & IRQ_STAT_4PORTS)) + goto out; + + spin_lock(&host->lock); + + for (i = 0; i < host->n_ports; i++) + if (status & (1 << i)) { + sil24_host_intr(host->ports[i]); + handled++; + } + + spin_unlock(&host->lock); + out: + return IRQ_RETVAL(handled); +} + +static void sil24_error_handler(struct ata_port *ap) +{ + struct sil24_port_priv *pp = ap->private_data; + + if (sil24_init_port(ap)) + ata_eh_freeze_port(ap); + + sata_pmp_error_handler(ap); + + pp->do_port_rst = 0; +} + +static void sil24_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* make DMA engine forget about the failed command */ + if ((qc->flags & ATA_QCFLAG_FAILED) && sil24_init_port(ap)) + ata_eh_freeze_port(ap); +} + +static int sil24_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct sil24_port_priv *pp; + union sil24_cmd_block *cb; + size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS; + dma_addr_t cb_dma; + + pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + + cb = dmam_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL); + if (!cb) + return -ENOMEM; + memset(cb, 0, cb_size); + + pp->cmd_block = cb; + pp->cmd_block_dma = cb_dma; + + ap->private_data = pp; + + ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host"); + ata_port_pbar_desc(ap, SIL24_PORT_BAR, sil24_port_offset(ap), "port"); + + return 0; +} + +static void sil24_init_controller(struct ata_host *host) +{ + void __iomem *host_base = host->iomap[SIL24_HOST_BAR]; + u32 tmp; + int i; + + /* GPIO off */ + writel(0, host_base + HOST_FLASH_CMD); + + /* clear global reset & mask interrupts during initialization */ + writel(0, host_base + HOST_CTRL); + + /* init ports */ + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + void __iomem *port = sil24_port_base(ap); + + + /* Initial PHY setting */ + writel(0x20c, port + PORT_PHY_CFG); + + /* Clear port RST */ + tmp = readl(port + PORT_CTRL_STAT); + if (tmp & PORT_CS_PORT_RST) { + writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); + tmp = ata_wait_register(NULL, port + PORT_CTRL_STAT, + PORT_CS_PORT_RST, + PORT_CS_PORT_RST, 10, 100); + if (tmp & PORT_CS_PORT_RST) + dev_err(host->dev, + "failed to clear port RST\n"); + } + + /* configure port */ + sil24_config_port(ap); + } + + /* Turn on interrupts */ + writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL); +} + +static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + extern int __MARKER__sil24_cmd_block_is_sized_wrongly; + struct ata_port_info pi = sil24_port_info[ent->driver_data]; + const struct ata_port_info *ppi[] = { &pi, NULL }; + void __iomem * const *iomap; + struct ata_host *host; + int rc; + u32 tmp; + + /* cause link error if sil24_cmd_block is sized wrongly */ + if (sizeof(union sil24_cmd_block) != PAGE_SIZE) + __MARKER__sil24_cmd_block_is_sized_wrongly = 1; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* acquire resources */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + rc = pcim_iomap_regions(pdev, + (1 << SIL24_HOST_BAR) | (1 << SIL24_PORT_BAR), + DRV_NAME); + if (rc) + return rc; + iomap = pcim_iomap_table(pdev); + + /* apply workaround for completion IRQ loss on PCI-X errata */ + if (pi.flags & SIL24_FLAG_PCIX_IRQ_WOC) { + tmp = readl(iomap[SIL24_HOST_BAR] + HOST_CTRL); + if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL)) + dev_info(&pdev->dev, + "Applying completion IRQ loss on PCI-X errata fix\n"); + else + pi.flags &= ~SIL24_FLAG_PCIX_IRQ_WOC; + } + + /* allocate and fill host */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, + SIL24_FLAG2NPORTS(ppi[0]->flags)); + if (!host) + return -ENOMEM; + host->iomap = iomap; + + /* configure and activate the device */ + if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) { + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + if (rc) { + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, + "64-bit DMA enable failed\n"); + return rc; + } + } + } else { + rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, "32-bit DMA enable failed\n"); + return rc; + } + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, + "32-bit consistent DMA enable failed\n"); + return rc; + } + } + + /* Set max read request size to 4096. This slightly increases + * write throughput for pci-e variants. + */ + pcie_set_readrq(pdev, 4096); + + sil24_init_controller(host); + + if (sata_sil24_msi && !pci_enable_msi(pdev)) { + dev_info(&pdev->dev, "Using MSI\n"); + pci_intx(pdev, 0); + } + + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, sil24_interrupt, IRQF_SHARED, + &sil24_sht); +} + +#ifdef CONFIG_PM_SLEEP +static int sil24_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + void __iomem *host_base = host->iomap[SIL24_HOST_BAR]; + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) + writel(HOST_CTRL_GLOBAL_RST, host_base + HOST_CTRL); + + sil24_init_controller(host); + + ata_host_resume(host); + + return 0; +} +#endif + +#ifdef CONFIG_PM +static int sil24_port_resume(struct ata_port *ap) +{ + sil24_config_pmp(ap, ap->nr_pmp_links); + return 0; +} +#endif + +module_pci_driver(sil24_pci_driver); + +MODULE_AUTHOR("Tejun Heo"); +MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sil24_pci_tbl); diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c new file mode 100644 index 000000000..d1637ac40 --- /dev/null +++ b/drivers/ata/sata_sis.c @@ -0,0 +1,314 @@ +/* + * sata_sis.c - Silicon Integrated Systems SATA + * + * Maintained by: Uwe Koziolek + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2004 Uwe Koziolek + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sis.h" + +#define DRV_NAME "sata_sis" +#define DRV_VERSION "1.0" + +enum { + sis_180 = 0, + SIS_SCR_PCI_BAR = 5, + + /* PCI configuration registers */ + SIS_GENCTL = 0x54, /* IDE General Control register */ + SIS_SCR_BASE = 0xc0, /* sata0 phy SCR registers */ + SIS180_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */ + SIS182_SATA1_OFS = 0x20, /* offset from sata0->sata1 phy regs */ + SIS_PMR = 0x90, /* port mapping register */ + SIS_PMR_COMBINED = 0x30, + + /* random bits */ + SIS_FLAG_CFGSCR = (1 << 30), /* host flag: SCRs via PCI cfg */ + + GENCTL_IOMAPPED_SCR = (1 << 26), /* if set, SCRs are in IO space */ +}; + +static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static int sis_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); +static int sis_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); + +static const struct pci_device_id sis_pci_tbl[] = { + { PCI_VDEVICE(SI, 0x0180), sis_180 }, /* SiS 964/180 */ + { PCI_VDEVICE(SI, 0x0181), sis_180 }, /* SiS 964/180 */ + { PCI_VDEVICE(SI, 0x0182), sis_180 }, /* SiS 965/965L */ + { PCI_VDEVICE(SI, 0x0183), sis_180 }, /* SiS 965/965L */ + { PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/680 */ + { PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L/968/680 */ + + { } /* terminate list */ +}; + +static struct pci_driver sis_pci_driver = { + .name = DRV_NAME, + .id_table = sis_pci_tbl, + .probe = sis_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +static struct scsi_host_template sis_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations sis_ops = { + .inherits = &ata_bmdma_port_ops, + .scr_read = sis_scr_read, + .scr_write = sis_scr_write, +}; + +static const struct ata_port_info sis_port_info = { + .flags = ATA_FLAG_SATA, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &sis_ops, +}; + +MODULE_AUTHOR("Uwe Koziolek"); +MODULE_DESCRIPTION("low-level driver for Silicon Integrated Systems SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sis_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +static unsigned int get_scr_cfg_addr(struct ata_link *link, unsigned int sc_reg) +{ + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned int addr = SIS_SCR_BASE + (4 * sc_reg); + u8 pmr; + + if (ap->port_no) { + switch (pdev->device) { + case 0x0180: + case 0x0181: + pci_read_config_byte(pdev, SIS_PMR, &pmr); + if ((pmr & SIS_PMR_COMBINED) == 0) + addr += SIS180_SATA1_OFS; + break; + + case 0x0182: + case 0x0183: + case 0x1182: + addr += SIS182_SATA1_OFS; + break; + } + } + if (link->pmp) + addr += 0x10; + + return addr; +} + +static u32 sis_scr_cfg_read(struct ata_link *link, + unsigned int sc_reg, u32 *val) +{ + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + unsigned int cfg_addr = get_scr_cfg_addr(link, sc_reg); + + if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */ + return -EINVAL; + + pci_read_config_dword(pdev, cfg_addr, val); + return 0; +} + +static int sis_scr_cfg_write(struct ata_link *link, + unsigned int sc_reg, u32 val) +{ + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + unsigned int cfg_addr = get_scr_cfg_addr(link, sc_reg); + + pci_write_config_dword(pdev, cfg_addr, val); + return 0; +} + +static int sis_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) +{ + struct ata_port *ap = link->ap; + void __iomem *base = ap->ioaddr.scr_addr + link->pmp * 0x10; + + if (sc_reg > SCR_CONTROL) + return -EINVAL; + + if (ap->flags & SIS_FLAG_CFGSCR) + return sis_scr_cfg_read(link, sc_reg, val); + + *val = ioread32(base + sc_reg * 4); + return 0; +} + +static int sis_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) +{ + struct ata_port *ap = link->ap; + void __iomem *base = ap->ioaddr.scr_addr + link->pmp * 0x10; + + if (sc_reg > SCR_CONTROL) + return -EINVAL; + + if (ap->flags & SIS_FLAG_CFGSCR) + return sis_scr_cfg_write(link, sc_reg, val); + + iowrite32(val, base + (sc_reg * 4)); + return 0; +} + +static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct ata_port_info pi = sis_port_info; + const struct ata_port_info *ppi[] = { &pi, &pi }; + struct ata_host *host; + u32 genctl, val; + u8 pmr; + u8 port2_start = 0x20; + int i, rc; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* check and see if the SCRs are in IO space or PCI cfg space */ + pci_read_config_dword(pdev, SIS_GENCTL, &genctl); + if ((genctl & GENCTL_IOMAPPED_SCR) == 0) + pi.flags |= SIS_FLAG_CFGSCR; + + /* if hardware thinks SCRs are in IO space, but there are + * no IO resources assigned, change to PCI cfg space. + */ + if ((!(pi.flags & SIS_FLAG_CFGSCR)) && + ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) || + (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) { + genctl &= ~GENCTL_IOMAPPED_SCR; + pci_write_config_dword(pdev, SIS_GENCTL, genctl); + pi.flags |= SIS_FLAG_CFGSCR; + } + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + switch (ent->device) { + case 0x0180: + case 0x0181: + + /* The PATA-handling is provided by pata_sis */ + switch (pmr & 0x30) { + case 0x10: + ppi[1] = &sis_info133_for_sata; + break; + + case 0x30: + ppi[0] = &sis_info133_for_sata; + break; + } + if ((pmr & SIS_PMR_COMBINED) == 0) { + dev_info(&pdev->dev, + "Detected SiS 180/181/964 chipset in SATA mode\n"); + port2_start = 64; + } else { + dev_info(&pdev->dev, + "Detected SiS 180/181 chipset in combined mode\n"); + port2_start = 0; + pi.flags |= ATA_FLAG_SLAVE_POSS; + } + break; + + case 0x0182: + case 0x0183: + pci_read_config_dword(pdev, 0x6C, &val); + if (val & (1L << 31)) { + dev_info(&pdev->dev, "Detected SiS 182/965 chipset\n"); + pi.flags |= ATA_FLAG_SLAVE_POSS; + } else { + dev_info(&pdev->dev, "Detected SiS 182/965L chipset\n"); + } + break; + + case 0x1182: + dev_info(&pdev->dev, + "Detected SiS 1182/966/680 SATA controller\n"); + pi.flags |= ATA_FLAG_SLAVE_POSS; + break; + + case 0x1183: + dev_info(&pdev->dev, + "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n"); + ppi[0] = &sis_info133_for_sata; + ppi[1] = &sis_info133_for_sata; + break; + } + + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); + if (rc) + return rc; + + for (i = 0; i < 2; i++) { + struct ata_port *ap = host->ports[i]; + + if (ap->flags & ATA_FLAG_SATA && + ap->flags & ATA_FLAG_SLAVE_POSS) { + rc = ata_slave_link_init(ap); + if (rc) + return rc; + } + } + + if (!(pi.flags & SIS_FLAG_CFGSCR)) { + void __iomem *mmio; + + rc = pcim_iomap_regions(pdev, 1 << SIS_SCR_PCI_BAR, DRV_NAME); + if (rc) + return rc; + mmio = host->iomap[SIS_SCR_PCI_BAR]; + + host->ports[0]->ioaddr.scr_addr = mmio; + host->ports[1]->ioaddr.scr_addr = mmio + port2_start; + } + + pci_set_master(pdev); + pci_intx(pdev, 1); + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, + IRQF_SHARED, &sis_sht); +} + +module_pci_driver(sis_pci_driver); diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c new file mode 100644 index 000000000..ff614be55 --- /dev/null +++ b/drivers/ata/sata_svw.c @@ -0,0 +1,544 @@ +/* + * sata_svw.c - ServerWorks / Apple K2 SATA + * + * Maintained by: Benjamin Herrenschmidt and + * Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003 Benjamin Herrenschmidt + * + * Bits from Jeff Garzik, Copyright RedHat, Inc. + * + * This driver probably works with non-Apple versions of the + * Broadcom chipset... + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_svw" +#define DRV_VERSION "2.3" + +enum { + /* ap->flags bits */ + K2_FLAG_SATA_8_PORTS = (1 << 24), + K2_FLAG_NO_ATAPI_DMA = (1 << 25), + K2_FLAG_BAR_POS_3 = (1 << 26), + + /* Taskfile registers offsets */ + K2_SATA_TF_CMD_OFFSET = 0x00, + K2_SATA_TF_DATA_OFFSET = 0x00, + K2_SATA_TF_ERROR_OFFSET = 0x04, + K2_SATA_TF_NSECT_OFFSET = 0x08, + K2_SATA_TF_LBAL_OFFSET = 0x0c, + K2_SATA_TF_LBAM_OFFSET = 0x10, + K2_SATA_TF_LBAH_OFFSET = 0x14, + K2_SATA_TF_DEVICE_OFFSET = 0x18, + K2_SATA_TF_CMDSTAT_OFFSET = 0x1c, + K2_SATA_TF_CTL_OFFSET = 0x20, + + /* DMA base */ + K2_SATA_DMA_CMD_OFFSET = 0x30, + + /* SCRs base */ + K2_SATA_SCR_STATUS_OFFSET = 0x40, + K2_SATA_SCR_ERROR_OFFSET = 0x44, + K2_SATA_SCR_CONTROL_OFFSET = 0x48, + + /* Others */ + K2_SATA_SICR1_OFFSET = 0x80, + K2_SATA_SICR2_OFFSET = 0x84, + K2_SATA_SIM_OFFSET = 0x88, + + /* Port stride */ + K2_SATA_PORT_OFFSET = 0x100, + + chip_svw4 = 0, + chip_svw8 = 1, + chip_svw42 = 2, /* bar 3 */ + chip_svw43 = 3, /* bar 5 */ +}; + +static u8 k2_stat_check_status(struct ata_port *ap); + + +static int k2_sata_check_atapi_dma(struct ata_queued_cmd *qc) +{ + u8 cmnd = qc->scsicmd->cmnd[0]; + + if (qc->ap->flags & K2_FLAG_NO_ATAPI_DMA) + return -1; /* ATAPI DMA not supported */ + else { + switch (cmnd) { + case READ_10: + case READ_12: + case READ_16: + case WRITE_10: + case WRITE_12: + case WRITE_16: + return 0; + + default: + return -1; + } + + } +} + +static int k2_sata_scr_read(struct ata_link *link, + unsigned int sc_reg, u32 *val) +{ + if (sc_reg > SCR_CONTROL) + return -EINVAL; + *val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 4)); + return 0; +} + + +static int k2_sata_scr_write(struct ata_link *link, + unsigned int sc_reg, u32 val) +{ + if (sc_reg > SCR_CONTROL) + return -EINVAL; + writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 4)); + return 0; +} + +static int k2_sata_softreset(struct ata_link *link, + unsigned int *class, unsigned long deadline) +{ + u8 dmactl; + void __iomem *mmio = link->ap->ioaddr.bmdma_addr; + + dmactl = readb(mmio + ATA_DMA_CMD); + + /* Clear the start bit */ + if (dmactl & ATA_DMA_START) { + dmactl &= ~ATA_DMA_START; + writeb(dmactl, mmio + ATA_DMA_CMD); + } + + return ata_sff_softreset(link, class, deadline); +} + +static int k2_sata_hardreset(struct ata_link *link, + unsigned int *class, unsigned long deadline) +{ + u8 dmactl; + void __iomem *mmio = link->ap->ioaddr.bmdma_addr; + + dmactl = readb(mmio + ATA_DMA_CMD); + + /* Clear the start bit */ + if (dmactl & ATA_DMA_START) { + dmactl &= ~ATA_DMA_START; + writeb(dmactl, mmio + ATA_DMA_CMD); + } + + return sata_sff_hardreset(link, class, deadline); +} + +static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + writeb(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + writew(tf->feature | (((u16)tf->hob_feature) << 8), + ioaddr->feature_addr); + writew(tf->nsect | (((u16)tf->hob_nsect) << 8), + ioaddr->nsect_addr); + writew(tf->lbal | (((u16)tf->hob_lbal) << 8), + ioaddr->lbal_addr); + writew(tf->lbam | (((u16)tf->hob_lbam) << 8), + ioaddr->lbam_addr); + writew(tf->lbah | (((u16)tf->hob_lbah) << 8), + ioaddr->lbah_addr); + } else if (is_addr) { + writew(tf->feature, ioaddr->feature_addr); + writew(tf->nsect, ioaddr->nsect_addr); + writew(tf->lbal, ioaddr->lbal_addr); + writew(tf->lbam, ioaddr->lbam_addr); + writew(tf->lbah, ioaddr->lbah_addr); + } + + if (tf->flags & ATA_TFLAG_DEVICE) + writeb(tf->device, ioaddr->device_addr); + + ata_wait_idle(ap); +} + + +static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u16 nsect, lbal, lbam, lbah, feature; + + tf->command = k2_stat_check_status(ap); + tf->device = readw(ioaddr->device_addr); + feature = readw(ioaddr->error_addr); + nsect = readw(ioaddr->nsect_addr); + lbal = readw(ioaddr->lbal_addr); + lbam = readw(ioaddr->lbam_addr); + lbah = readw(ioaddr->lbah_addr); + + tf->feature = feature; + tf->nsect = nsect; + tf->lbal = lbal; + tf->lbam = lbam; + tf->lbah = lbah; + + if (tf->flags & ATA_TFLAG_LBA48) { + tf->hob_feature = feature >> 8; + tf->hob_nsect = nsect >> 8; + tf->hob_lbal = lbal >> 8; + tf->hob_lbam = lbam >> 8; + tf->hob_lbah = lbah >> 8; + } +} + +/** + * k2_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction (MMIO) + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +static void k2_bmdma_setup_mmio(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u8 dmactl; + void __iomem *mmio = ap->ioaddr.bmdma_addr; + + /* load PRD table addr. */ + mb(); /* make sure PRD table writes are visible to controller */ + writel(ap->bmdma_prd_dma, mmio + ATA_DMA_TABLE_OFS); + + /* specify data direction, triple-check start bit is clear */ + dmactl = readb(mmio + ATA_DMA_CMD); + dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); + if (!rw) + dmactl |= ATA_DMA_WR; + writeb(dmactl, mmio + ATA_DMA_CMD); + + /* issue r/w command if this is not a ATA DMA command*/ + if (qc->tf.protocol != ATA_PROT_DMA) + ap->ops->sff_exec_command(ap, &qc->tf); +} + +/** + * k2_bmdma_start_mmio - Start a PCI IDE BMDMA transaction (MMIO) + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *mmio = ap->ioaddr.bmdma_addr; + u8 dmactl; + + /* start host DMA transaction */ + dmactl = readb(mmio + ATA_DMA_CMD); + writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); + /* This works around possible data corruption. + + On certain SATA controllers that can be seen when the r/w + command is given to the controller before the host DMA is + started. + + On a Read command, the controller would initiate the + command to the drive even before it sees the DMA + start. When there are very fast drives connected to the + controller, or when the data request hits in the drive + cache, there is the possibility that the drive returns a + part or all of the requested data to the controller before + the DMA start is issued. In this case, the controller + would become confused as to what to do with the data. In + the worst case when all the data is returned back to the + controller, the controller could hang. In other cases it + could return partial data returning in data + corruption. This problem has been seen in PPC systems and + can also appear on an system with very fast disks, where + the SATA controller is sitting behind a number of bridges, + and hence there is significant latency between the r/w + command and the start command. */ + /* issue r/w command if the access is to ATA */ + if (qc->tf.protocol == ATA_PROT_DMA) + ap->ops->sff_exec_command(ap, &qc->tf); +} + + +static u8 k2_stat_check_status(struct ata_port *ap) +{ + return readl(ap->ioaddr.status_addr); +} + +static int k2_sata_show_info(struct seq_file *m, struct Scsi_Host *shost) +{ + struct ata_port *ap; + struct device_node *np; + int index; + + /* Find the ata_port */ + ap = ata_shost_to_port(shost); + if (ap == NULL) + return 0; + + /* Find the OF node for the PCI device proper */ + np = pci_device_to_OF_node(to_pci_dev(ap->host->dev)); + if (np == NULL) + return 0; + + /* Match it to a port node */ + index = (ap == ap->host->ports[0]) ? 0 : 1; + for (np = np->child; np != NULL; np = np->sibling) { + const u32 *reg = of_get_property(np, "reg", NULL); + if (!reg) + continue; + if (index == *reg) { + seq_printf(m, "devspec: %s\n", np->full_name); + break; + } + } + return 0; +} + +static struct scsi_host_template k2_sata_sht = { + ATA_BMDMA_SHT(DRV_NAME), + .show_info = k2_sata_show_info, +}; + + +static struct ata_port_operations k2_sata_ops = { + .inherits = &ata_bmdma_port_ops, + .softreset = k2_sata_softreset, + .hardreset = k2_sata_hardreset, + .sff_tf_load = k2_sata_tf_load, + .sff_tf_read = k2_sata_tf_read, + .sff_check_status = k2_stat_check_status, + .check_atapi_dma = k2_sata_check_atapi_dma, + .bmdma_setup = k2_bmdma_setup_mmio, + .bmdma_start = k2_bmdma_start_mmio, + .scr_read = k2_sata_scr_read, + .scr_write = k2_sata_scr_write, +}; + +static const struct ata_port_info k2_port_info[] = { + /* chip_svw4 */ + { + .flags = ATA_FLAG_SATA | K2_FLAG_NO_ATAPI_DMA, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &k2_sata_ops, + }, + /* chip_svw8 */ + { + .flags = ATA_FLAG_SATA | K2_FLAG_NO_ATAPI_DMA | + K2_FLAG_SATA_8_PORTS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &k2_sata_ops, + }, + /* chip_svw42 */ + { + .flags = ATA_FLAG_SATA | K2_FLAG_BAR_POS_3, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &k2_sata_ops, + }, + /* chip_svw43 */ + { + .flags = ATA_FLAG_SATA, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &k2_sata_ops, + }, +}; + +static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base) +{ + port->cmd_addr = base + K2_SATA_TF_CMD_OFFSET; + port->data_addr = base + K2_SATA_TF_DATA_OFFSET; + port->feature_addr = + port->error_addr = base + K2_SATA_TF_ERROR_OFFSET; + port->nsect_addr = base + K2_SATA_TF_NSECT_OFFSET; + port->lbal_addr = base + K2_SATA_TF_LBAL_OFFSET; + port->lbam_addr = base + K2_SATA_TF_LBAM_OFFSET; + port->lbah_addr = base + K2_SATA_TF_LBAH_OFFSET; + port->device_addr = base + K2_SATA_TF_DEVICE_OFFSET; + port->command_addr = + port->status_addr = base + K2_SATA_TF_CMDSTAT_OFFSET; + port->altstatus_addr = + port->ctl_addr = base + K2_SATA_TF_CTL_OFFSET; + port->bmdma_addr = base + K2_SATA_DMA_CMD_OFFSET; + port->scr_addr = base + K2_SATA_SCR_STATUS_OFFSET; +} + + +static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + const struct ata_port_info *ppi[] = + { &k2_port_info[ent->driver_data], NULL }; + struct ata_host *host; + void __iomem *mmio_base; + int n_ports, i, rc, bar_pos; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* allocate host */ + n_ports = 4; + if (ppi[0]->flags & K2_FLAG_SATA_8_PORTS) + n_ports = 8; + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + if (!host) + return -ENOMEM; + + bar_pos = 5; + if (ppi[0]->flags & K2_FLAG_BAR_POS_3) + bar_pos = 3; + /* + * If this driver happens to only be useful on Apple's K2, then + * we should check that here as it has a normal Serverworks ID + */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* + * Check if we have resources mapped at all (second function may + * have been disabled by firmware) + */ + if (pci_resource_len(pdev, bar_pos) == 0) { + /* In IDE mode we need to pin the device to ensure that + pcim_release does not clear the busmaster bit in config + space, clearing causes busmaster DMA to fail on + ports 3 & 4 */ + pcim_pin_device(pdev); + return -ENODEV; + } + + /* Request and iomap PCI regions */ + rc = pcim_iomap_regions(pdev, 1 << bar_pos, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + host->iomap = pcim_iomap_table(pdev); + mmio_base = host->iomap[bar_pos]; + + /* different controllers have different number of ports - currently 4 or 8 */ + /* All ports are on the same function. Multi-function device is no + * longer available. This should not be seen in any system. */ + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + unsigned int offset = i * K2_SATA_PORT_OFFSET; + + k2_sata_setup_port(&ap->ioaddr, mmio_base + offset); + + ata_port_pbar_desc(ap, 5, -1, "mmio"); + ata_port_pbar_desc(ap, 5, offset, "port"); + } + + rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + + /* Clear a magic bit in SCR1 according to Darwin, those help + * some funky seagate drives (though so far, those were already + * set by the firmware on the machines I had access to) + */ + writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000, + mmio_base + K2_SATA_SICR1_OFFSET); + + /* Clear SATA error & interrupts we don't use */ + writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET); + writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); + + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, + IRQF_SHARED, &k2_sata_sht); +} + +/* 0x240 is device ID for Apple K2 device + * 0x241 is device ID for Serverworks Frodo4 + * 0x242 is device ID for Serverworks Frodo8 + * 0x24a is device ID for BCM5785 (aka HT1000) HT southbridge integrated SATA + * controller + * */ +static const struct pci_device_id k2_sata_pci_tbl[] = { + { PCI_VDEVICE(SERVERWORKS, 0x0240), chip_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw8 }, + { PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x024a), chip_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x024b), chip_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x0410), chip_svw42 }, + { PCI_VDEVICE(SERVERWORKS, 0x0411), chip_svw43 }, + + { } +}; + +static struct pci_driver k2_sata_pci_driver = { + .name = DRV_NAME, + .id_table = k2_sata_pci_tbl, + .probe = k2_sata_init_one, + .remove = ata_pci_remove_one, +}; + +module_pci_driver(k2_sata_pci_driver); + +MODULE_AUTHOR("Benjamin Herrenschmidt"); +MODULE_DESCRIPTION("low-level driver for K2 SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, k2_sata_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c new file mode 100644 index 000000000..3a18a8a71 --- /dev/null +++ b/drivers/ata/sata_sx4.c @@ -0,0 +1,1501 @@ +/* + * sata_sx4.c - Promise SATA + * + * Maintained by: Tejun Heo + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2004 Red Hat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. + * + */ + +/* + Theory of operation + ------------------- + + The SX4 (PDC20621) chip features a single Host DMA (HDMA) copy + engine, DIMM memory, and four ATA engines (one per SATA port). + Data is copied to/from DIMM memory by the HDMA engine, before + handing off to one (or more) of the ATA engines. The ATA + engines operate solely on DIMM memory. + + The SX4 behaves like a PATA chip, with no SATA controls or + knowledge whatsoever, leading to the presumption that + PATA<->SATA bridges exist on SX4 boards, external to the + PDC20621 chip itself. + + The chip is quite capable, supporting an XOR engine and linked + hardware commands (permits a string to transactions to be + submitted and waited-on as a single unit), and an optional + microprocessor. + + The limiting factor is largely software. This Linux driver was + written to multiplex the single HDMA engine to copy disk + transactions into a fixed DIMM memory space, from where an ATA + engine takes over. As a result, each WRITE looks like this: + + submit HDMA packet to hardware + hardware copies data from system memory to DIMM + hardware raises interrupt + + submit ATA packet to hardware + hardware executes ATA WRITE command, w/ data in DIMM + hardware raises interrupt + + and each READ looks like this: + + submit ATA packet to hardware + hardware executes ATA READ command, w/ data in DIMM + hardware raises interrupt + + submit HDMA packet to hardware + hardware copies data from DIMM to system memory + hardware raises interrupt + + This is a very slow, lock-step way of doing things that can + certainly be improved by motivated kernel hackers. + + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sata_promise.h" + +#define DRV_NAME "sata_sx4" +#define DRV_VERSION "0.12" + + +enum { + PDC_MMIO_BAR = 3, + PDC_DIMM_BAR = 4, + + PDC_PRD_TBL = 0x44, /* Direct command DMA table addr */ + + PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */ + PDC_HDMA_PKT_SUBMIT = 0x100, /* Host DMA packet pointer addr */ + PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */ + PDC_HDMA_CTLSTAT = 0x12C, /* Host DMA control / status */ + + PDC_CTLSTAT = 0x60, /* IDEn control / status */ + + PDC_20621_SEQCTL = 0x400, + PDC_20621_SEQMASK = 0x480, + PDC_20621_GENERAL_CTL = 0x484, + PDC_20621_PAGE_SIZE = (32 * 1024), + + /* chosen, not constant, values; we design our own DIMM mem map */ + PDC_20621_DIMM_WINDOW = 0x0C, /* page# for 32K DIMM window */ + PDC_20621_DIMM_BASE = 0x00200000, + PDC_20621_DIMM_DATA = (64 * 1024), + PDC_DIMM_DATA_STEP = (256 * 1024), + PDC_DIMM_WINDOW_STEP = (8 * 1024), + PDC_DIMM_HOST_PRD = (6 * 1024), + PDC_DIMM_HOST_PKT = (128 * 0), + PDC_DIMM_HPKT_PRD = (128 * 1), + PDC_DIMM_ATA_PKT = (128 * 2), + PDC_DIMM_APKT_PRD = (128 * 3), + PDC_DIMM_HEADER_SZ = PDC_DIMM_APKT_PRD + 128, + PDC_PAGE_WINDOW = 0x40, + PDC_PAGE_DATA = PDC_PAGE_WINDOW + + (PDC_20621_DIMM_DATA / PDC_20621_PAGE_SIZE), + PDC_PAGE_SET = PDC_DIMM_DATA_STEP / PDC_20621_PAGE_SIZE, + + PDC_CHIP0_OFS = 0xC0000, /* offset of chip #0 */ + + PDC_20621_ERR_MASK = (1<<19) | (1<<20) | (1<<21) | (1<<22) | + (1<<23), + + board_20621 = 0, /* FastTrak S150 SX4 */ + + PDC_MASK_INT = (1 << 10), /* HDMA/ATA mask int */ + PDC_RESET = (1 << 11), /* HDMA/ATA reset */ + PDC_DMA_ENABLE = (1 << 7), /* DMA start/stop */ + + PDC_MAX_HDMA = 32, + PDC_HDMA_Q_MASK = (PDC_MAX_HDMA - 1), + + PDC_DIMM0_SPD_DEV_ADDRESS = 0x50, + PDC_DIMM1_SPD_DEV_ADDRESS = 0x51, + PDC_I2C_CONTROL = 0x48, + PDC_I2C_ADDR_DATA = 0x4C, + PDC_DIMM0_CONTROL = 0x80, + PDC_DIMM1_CONTROL = 0x84, + PDC_SDRAM_CONTROL = 0x88, + PDC_I2C_WRITE = 0, /* master -> slave */ + PDC_I2C_READ = (1 << 6), /* master <- slave */ + PDC_I2C_START = (1 << 7), /* start I2C proto */ + PDC_I2C_MASK_INT = (1 << 5), /* mask I2C interrupt */ + PDC_I2C_COMPLETE = (1 << 16), /* I2C normal compl. */ + PDC_I2C_NO_ACK = (1 << 20), /* slave no-ack addr */ + PDC_DIMM_SPD_SUBADDRESS_START = 0x00, + PDC_DIMM_SPD_SUBADDRESS_END = 0x7F, + PDC_DIMM_SPD_ROW_NUM = 3, + PDC_DIMM_SPD_COLUMN_NUM = 4, + PDC_DIMM_SPD_MODULE_ROW = 5, + PDC_DIMM_SPD_TYPE = 11, + PDC_DIMM_SPD_FRESH_RATE = 12, + PDC_DIMM_SPD_BANK_NUM = 17, + PDC_DIMM_SPD_CAS_LATENCY = 18, + PDC_DIMM_SPD_ATTRIBUTE = 21, + PDC_DIMM_SPD_ROW_PRE_CHARGE = 27, + PDC_DIMM_SPD_ROW_ACTIVE_DELAY = 28, + PDC_DIMM_SPD_RAS_CAS_DELAY = 29, + PDC_DIMM_SPD_ACTIVE_PRECHARGE = 30, + PDC_DIMM_SPD_SYSTEM_FREQ = 126, + PDC_CTL_STATUS = 0x08, + PDC_DIMM_WINDOW_CTLR = 0x0C, + PDC_TIME_CONTROL = 0x3C, + PDC_TIME_PERIOD = 0x40, + PDC_TIME_COUNTER = 0x44, + PDC_GENERAL_CTLR = 0x484, + PCI_PLL_INIT = 0x8A531824, + PCI_X_TCOUNT = 0xEE1E5CFF, + + /* PDC_TIME_CONTROL bits */ + PDC_TIMER_BUZZER = (1 << 10), + PDC_TIMER_MODE_PERIODIC = 0, /* bits 9:8 == 00 */ + PDC_TIMER_MODE_ONCE = (1 << 8), /* bits 9:8 == 01 */ + PDC_TIMER_ENABLE = (1 << 7), + PDC_TIMER_MASK_INT = (1 << 5), + PDC_TIMER_SEQ_MASK = 0x1f, /* SEQ ID for timer */ + PDC_TIMER_DEFAULT = PDC_TIMER_MODE_ONCE | + PDC_TIMER_ENABLE | + PDC_TIMER_MASK_INT, +}; + +#define ECC_ERASE_BUF_SZ (128 * 1024) + +struct pdc_port_priv { + u8 dimm_buf[(ATA_PRD_SZ * ATA_MAX_PRD) + 512]; + u8 *pkt; + dma_addr_t pkt_dma; +}; + +struct pdc_host_priv { + unsigned int doing_hdma; + unsigned int hdma_prod; + unsigned int hdma_cons; + struct { + struct ata_queued_cmd *qc; + unsigned int seq; + unsigned long pkt_ofs; + } hdma[32]; +}; + + +static int pdc_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static void pdc_error_handler(struct ata_port *ap); +static void pdc_freeze(struct ata_port *ap); +static void pdc_thaw(struct ata_port *ap); +static int pdc_port_start(struct ata_port *ap); +static void pdc20621_qc_prep(struct ata_queued_cmd *qc); +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); +static unsigned int pdc20621_dimm_init(struct ata_host *host); +static int pdc20621_detect_dimm(struct ata_host *host); +static unsigned int pdc20621_i2c_read(struct ata_host *host, + u32 device, u32 subaddr, u32 *pdata); +static int pdc20621_prog_dimm0(struct ata_host *host); +static unsigned int pdc20621_prog_dimm_global(struct ata_host *host); +#ifdef ATA_VERBOSE_DEBUG +static void pdc20621_get_from_dimm(struct ata_host *host, + void *psource, u32 offset, u32 size); +#endif +static void pdc20621_put_to_dimm(struct ata_host *host, + void *psource, u32 offset, u32 size); +static void pdc20621_irq_clear(struct ata_port *ap); +static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc); +static int pdc_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static void pdc_post_internal_cmd(struct ata_queued_cmd *qc); +static int pdc_check_atapi_dma(struct ata_queued_cmd *qc); + + +static struct scsi_host_template pdc_sata_sht = { + ATA_BASE_SHT(DRV_NAME), + .sg_tablesize = LIBATA_MAX_PRD, + .dma_boundary = ATA_DMA_BOUNDARY, +}; + +/* TODO: inherit from base port_ops after converting to new EH */ +static struct ata_port_operations pdc_20621_ops = { + .inherits = &ata_sff_port_ops, + + .check_atapi_dma = pdc_check_atapi_dma, + .qc_prep = pdc20621_qc_prep, + .qc_issue = pdc20621_qc_issue, + + .freeze = pdc_freeze, + .thaw = pdc_thaw, + .softreset = pdc_softreset, + .error_handler = pdc_error_handler, + .lost_interrupt = ATA_OP_NULL, + .post_internal_cmd = pdc_post_internal_cmd, + + .port_start = pdc_port_start, + + .sff_tf_load = pdc_tf_load_mmio, + .sff_exec_command = pdc_exec_command_mmio, + .sff_irq_clear = pdc20621_irq_clear, +}; + +static const struct ata_port_info pdc_port_info[] = { + /* board_20621 */ + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_ATAPI | + ATA_FLAG_PIO_POLLING, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &pdc_20621_ops, + }, + +}; + +static const struct pci_device_id pdc_sata_pci_tbl[] = { + { PCI_VDEVICE(PROMISE, 0x6622), board_20621 }, + + { } /* terminate list */ +}; + +static struct pci_driver pdc_sata_pci_driver = { + .name = DRV_NAME, + .id_table = pdc_sata_pci_tbl, + .probe = pdc_sata_init_one, + .remove = ata_pci_remove_one, +}; + + +static int pdc_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct pdc_port_priv *pp; + + pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + + pp->pkt = dmam_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL); + if (!pp->pkt) + return -ENOMEM; + + ap->private_data = pp; + + return 0; +} + +static inline void pdc20621_ata_sg(u8 *buf, unsigned int portno, + unsigned int total_len) +{ + u32 addr; + unsigned int dw = PDC_DIMM_APKT_PRD >> 2; + __le32 *buf32 = (__le32 *) buf; + + /* output ATA packet S/G table */ + addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA + + (PDC_DIMM_DATA_STEP * portno); + VPRINTK("ATA sg addr 0x%x, %d\n", addr, addr); + buf32[dw] = cpu_to_le32(addr); + buf32[dw + 1] = cpu_to_le32(total_len | ATA_PRD_EOT); + + VPRINTK("ATA PSG @ %x == (0x%x, 0x%x)\n", + PDC_20621_DIMM_BASE + + (PDC_DIMM_WINDOW_STEP * portno) + + PDC_DIMM_APKT_PRD, + buf32[dw], buf32[dw + 1]); +} + +static inline void pdc20621_host_sg(u8 *buf, unsigned int portno, + unsigned int total_len) +{ + u32 addr; + unsigned int dw = PDC_DIMM_HPKT_PRD >> 2; + __le32 *buf32 = (__le32 *) buf; + + /* output Host DMA packet S/G table */ + addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA + + (PDC_DIMM_DATA_STEP * portno); + + buf32[dw] = cpu_to_le32(addr); + buf32[dw + 1] = cpu_to_le32(total_len | ATA_PRD_EOT); + + VPRINTK("HOST PSG @ %x == (0x%x, 0x%x)\n", + PDC_20621_DIMM_BASE + + (PDC_DIMM_WINDOW_STEP * portno) + + PDC_DIMM_HPKT_PRD, + buf32[dw], buf32[dw + 1]); +} + +static inline unsigned int pdc20621_ata_pkt(struct ata_taskfile *tf, + unsigned int devno, u8 *buf, + unsigned int portno) +{ + unsigned int i, dw; + __le32 *buf32 = (__le32 *) buf; + u8 dev_reg; + + unsigned int dimm_sg = PDC_20621_DIMM_BASE + + (PDC_DIMM_WINDOW_STEP * portno) + + PDC_DIMM_APKT_PRD; + VPRINTK("ENTER, dimm_sg == 0x%x, %d\n", dimm_sg, dimm_sg); + + i = PDC_DIMM_ATA_PKT; + + /* + * Set up ATA packet + */ + if ((tf->protocol == ATA_PROT_DMA) && (!(tf->flags & ATA_TFLAG_WRITE))) + buf[i++] = PDC_PKT_READ; + else if (tf->protocol == ATA_PROT_NODATA) + buf[i++] = PDC_PKT_NODATA; + else + buf[i++] = 0; + buf[i++] = 0; /* reserved */ + buf[i++] = portno + 1; /* seq. id */ + buf[i++] = 0xff; /* delay seq. id */ + + /* dimm dma S/G, and next-pkt */ + dw = i >> 2; + if (tf->protocol == ATA_PROT_NODATA) + buf32[dw] = 0; + else + buf32[dw] = cpu_to_le32(dimm_sg); + buf32[dw + 1] = 0; + i += 8; + + if (devno == 0) + dev_reg = ATA_DEVICE_OBS; + else + dev_reg = ATA_DEVICE_OBS | ATA_DEV1; + + /* select device */ + buf[i++] = (1 << 5) | PDC_PKT_CLEAR_BSY | ATA_REG_DEVICE; + buf[i++] = dev_reg; + + /* device control register */ + buf[i++] = (1 << 5) | PDC_REG_DEVCTL; + buf[i++] = tf->ctl; + + return i; +} + +static inline void pdc20621_host_pkt(struct ata_taskfile *tf, u8 *buf, + unsigned int portno) +{ + unsigned int dw; + u32 tmp; + __le32 *buf32 = (__le32 *) buf; + + unsigned int host_sg = PDC_20621_DIMM_BASE + + (PDC_DIMM_WINDOW_STEP * portno) + + PDC_DIMM_HOST_PRD; + unsigned int dimm_sg = PDC_20621_DIMM_BASE + + (PDC_DIMM_WINDOW_STEP * portno) + + PDC_DIMM_HPKT_PRD; + VPRINTK("ENTER, dimm_sg == 0x%x, %d\n", dimm_sg, dimm_sg); + VPRINTK("host_sg == 0x%x, %d\n", host_sg, host_sg); + + dw = PDC_DIMM_HOST_PKT >> 2; + + /* + * Set up Host DMA packet + */ + if ((tf->protocol == ATA_PROT_DMA) && (!(tf->flags & ATA_TFLAG_WRITE))) + tmp = PDC_PKT_READ; + else + tmp = 0; + tmp |= ((portno + 1 + 4) << 16); /* seq. id */ + tmp |= (0xff << 24); /* delay seq. id */ + buf32[dw + 0] = cpu_to_le32(tmp); + buf32[dw + 1] = cpu_to_le32(host_sg); + buf32[dw + 2] = cpu_to_le32(dimm_sg); + buf32[dw + 3] = 0; + + VPRINTK("HOST PKT @ %x == (0x%x 0x%x 0x%x 0x%x)\n", + PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * portno) + + PDC_DIMM_HOST_PKT, + buf32[dw + 0], + buf32[dw + 1], + buf32[dw + 2], + buf32[dw + 3]); +} + +static void pdc20621_dma_prep(struct ata_queued_cmd *qc) +{ + struct scatterlist *sg; + struct ata_port *ap = qc->ap; + struct pdc_port_priv *pp = ap->private_data; + void __iomem *mmio = ap->host->iomap[PDC_MMIO_BAR]; + void __iomem *dimm_mmio = ap->host->iomap[PDC_DIMM_BAR]; + unsigned int portno = ap->port_no; + unsigned int i, si, idx, total_len = 0, sgt_len; + __le32 *buf = (__le32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ]; + + WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); + + VPRINTK("ata%u: ENTER\n", ap->print_id); + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + /* + * Build S/G table + */ + idx = 0; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + buf[idx++] = cpu_to_le32(sg_dma_address(sg)); + buf[idx++] = cpu_to_le32(sg_dma_len(sg)); + total_len += sg_dma_len(sg); + } + buf[idx - 1] |= cpu_to_le32(ATA_PRD_EOT); + sgt_len = idx * 4; + + /* + * Build ATA, host DMA packets + */ + pdc20621_host_sg(&pp->dimm_buf[0], portno, total_len); + pdc20621_host_pkt(&qc->tf, &pp->dimm_buf[0], portno); + + pdc20621_ata_sg(&pp->dimm_buf[0], portno, total_len); + i = pdc20621_ata_pkt(&qc->tf, qc->dev->devno, &pp->dimm_buf[0], portno); + + if (qc->tf.flags & ATA_TFLAG_LBA48) + i = pdc_prep_lba48(&qc->tf, &pp->dimm_buf[0], i); + else + i = pdc_prep_lba28(&qc->tf, &pp->dimm_buf[0], i); + + pdc_pkt_footer(&qc->tf, &pp->dimm_buf[0], i); + + /* copy three S/G tables and two packets to DIMM MMIO window */ + memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP), + &pp->dimm_buf, PDC_DIMM_HEADER_SZ); + memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP) + + PDC_DIMM_HOST_PRD, + &pp->dimm_buf[PDC_DIMM_HEADER_SZ], sgt_len); + + /* force host FIFO dump */ + writel(0x00000001, mmio + PDC_20621_GENERAL_CTL); + + readl(dimm_mmio); /* MMIO PCI posting flush */ + + VPRINTK("ata pkt buf ofs %u, prd size %u, mmio copied\n", i, sgt_len); +} + +static void pdc20621_nodata_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pdc_port_priv *pp = ap->private_data; + void __iomem *mmio = ap->host->iomap[PDC_MMIO_BAR]; + void __iomem *dimm_mmio = ap->host->iomap[PDC_DIMM_BAR]; + unsigned int portno = ap->port_no; + unsigned int i; + + VPRINTK("ata%u: ENTER\n", ap->print_id); + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + i = pdc20621_ata_pkt(&qc->tf, qc->dev->devno, &pp->dimm_buf[0], portno); + + if (qc->tf.flags & ATA_TFLAG_LBA48) + i = pdc_prep_lba48(&qc->tf, &pp->dimm_buf[0], i); + else + i = pdc_prep_lba28(&qc->tf, &pp->dimm_buf[0], i); + + pdc_pkt_footer(&qc->tf, &pp->dimm_buf[0], i); + + /* copy three S/G tables and two packets to DIMM MMIO window */ + memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP), + &pp->dimm_buf, PDC_DIMM_HEADER_SZ); + + /* force host FIFO dump */ + writel(0x00000001, mmio + PDC_20621_GENERAL_CTL); + + readl(dimm_mmio); /* MMIO PCI posting flush */ + + VPRINTK("ata pkt buf ofs %u, mmio copied\n", i); +} + +static void pdc20621_qc_prep(struct ata_queued_cmd *qc) +{ + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + pdc20621_dma_prep(qc); + break; + case ATA_PROT_NODATA: + pdc20621_nodata_prep(qc); + break; + default: + break; + } +} + +static void __pdc20621_push_hdma(struct ata_queued_cmd *qc, + unsigned int seq, + u32 pkt_ofs) +{ + struct ata_port *ap = qc->ap; + struct ata_host *host = ap->host; + void __iomem *mmio = host->iomap[PDC_MMIO_BAR]; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4)); + readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */ + + writel(pkt_ofs, mmio + PDC_HDMA_PKT_SUBMIT); + readl(mmio + PDC_HDMA_PKT_SUBMIT); /* flush */ +} + +static void pdc20621_push_hdma(struct ata_queued_cmd *qc, + unsigned int seq, + u32 pkt_ofs) +{ + struct ata_port *ap = qc->ap; + struct pdc_host_priv *pp = ap->host->private_data; + unsigned int idx = pp->hdma_prod & PDC_HDMA_Q_MASK; + + if (!pp->doing_hdma) { + __pdc20621_push_hdma(qc, seq, pkt_ofs); + pp->doing_hdma = 1; + return; + } + + pp->hdma[idx].qc = qc; + pp->hdma[idx].seq = seq; + pp->hdma[idx].pkt_ofs = pkt_ofs; + pp->hdma_prod++; +} + +static void pdc20621_pop_hdma(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pdc_host_priv *pp = ap->host->private_data; + unsigned int idx = pp->hdma_cons & PDC_HDMA_Q_MASK; + + /* if nothing on queue, we're done */ + if (pp->hdma_prod == pp->hdma_cons) { + pp->doing_hdma = 0; + return; + } + + __pdc20621_push_hdma(pp->hdma[idx].qc, pp->hdma[idx].seq, + pp->hdma[idx].pkt_ofs); + pp->hdma_cons++; +} + +#ifdef ATA_VERBOSE_DEBUG +static void pdc20621_dump_hdma(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int port_no = ap->port_no; + void __iomem *dimm_mmio = ap->host->iomap[PDC_DIMM_BAR]; + + dimm_mmio += (port_no * PDC_DIMM_WINDOW_STEP); + dimm_mmio += PDC_DIMM_HOST_PKT; + + printk(KERN_ERR "HDMA[0] == 0x%08X\n", readl(dimm_mmio)); + printk(KERN_ERR "HDMA[1] == 0x%08X\n", readl(dimm_mmio + 4)); + printk(KERN_ERR "HDMA[2] == 0x%08X\n", readl(dimm_mmio + 8)); + printk(KERN_ERR "HDMA[3] == 0x%08X\n", readl(dimm_mmio + 12)); +} +#else +static inline void pdc20621_dump_hdma(struct ata_queued_cmd *qc) { } +#endif /* ATA_VERBOSE_DEBUG */ + +static void pdc20621_packet_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_host *host = ap->host; + unsigned int port_no = ap->port_no; + void __iomem *mmio = host->iomap[PDC_MMIO_BAR]; + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u8 seq = (u8) (port_no + 1); + unsigned int port_ofs; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + VPRINTK("ata%u: ENTER\n", ap->print_id); + + wmb(); /* flush PRD, pkt writes */ + + port_ofs = PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * port_no); + + /* if writing, we (1) DMA to DIMM, then (2) do ATA command */ + if (rw && qc->tf.protocol == ATA_PROT_DMA) { + seq += 4; + + pdc20621_dump_hdma(qc); + pdc20621_push_hdma(qc, seq, port_ofs + PDC_DIMM_HOST_PKT); + VPRINTK("queued ofs 0x%x (%u), seq %u\n", + port_ofs + PDC_DIMM_HOST_PKT, + port_ofs + PDC_DIMM_HOST_PKT, + seq); + } else { + writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4)); + readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */ + + writel(port_ofs + PDC_DIMM_ATA_PKT, + ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl(ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + VPRINTK("submitted ofs 0x%x (%u), seq %u\n", + port_ofs + PDC_DIMM_ATA_PKT, + port_ofs + PDC_DIMM_ATA_PKT, + seq); + } +} + +static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc) +{ + switch (qc->tf.protocol) { + case ATA_PROT_NODATA: + if (qc->tf.flags & ATA_TFLAG_POLLING) + break; + /*FALLTHROUGH*/ + case ATA_PROT_DMA: + pdc20621_packet_start(qc); + return 0; + + case ATAPI_PROT_DMA: + BUG(); + break; + + default: + break; + } + + return ata_sff_qc_issue(qc); +} + +static inline unsigned int pdc20621_host_intr(struct ata_port *ap, + struct ata_queued_cmd *qc, + unsigned int doing_hdma, + void __iomem *mmio) +{ + unsigned int port_no = ap->port_no; + unsigned int port_ofs = + PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * port_no); + u8 status; + unsigned int handled = 0; + + VPRINTK("ENTER\n"); + + if ((qc->tf.protocol == ATA_PROT_DMA) && /* read */ + (!(qc->tf.flags & ATA_TFLAG_WRITE))) { + + /* step two - DMA from DIMM to host */ + if (doing_hdma) { + VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->print_id, + readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); + /* get drive status; clear intr; complete txn */ + qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); + ata_qc_complete(qc); + pdc20621_pop_hdma(qc); + } + + /* step one - exec ATA command */ + else { + u8 seq = (u8) (port_no + 1 + 4); + VPRINTK("ata%u: read ata, 0x%x 0x%x\n", ap->print_id, + readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); + + /* submit hdma pkt */ + pdc20621_dump_hdma(qc); + pdc20621_push_hdma(qc, seq, + port_ofs + PDC_DIMM_HOST_PKT); + } + handled = 1; + + } else if (qc->tf.protocol == ATA_PROT_DMA) { /* write */ + + /* step one - DMA from host to DIMM */ + if (doing_hdma) { + u8 seq = (u8) (port_no + 1); + VPRINTK("ata%u: write hdma, 0x%x 0x%x\n", ap->print_id, + readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); + + /* submit ata pkt */ + writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4)); + readl(mmio + PDC_20621_SEQCTL + (seq * 4)); + writel(port_ofs + PDC_DIMM_ATA_PKT, + ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl(ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + } + + /* step two - execute ATA command */ + else { + VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->print_id, + readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); + /* get drive status; clear intr; complete txn */ + qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); + ata_qc_complete(qc); + pdc20621_pop_hdma(qc); + } + handled = 1; + + /* command completion, but no data xfer */ + } else if (qc->tf.protocol == ATA_PROT_NODATA) { + + status = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); + DPRINTK("BUS_NODATA (drv_stat 0x%X)\n", status); + qc->err_mask |= ac_err_mask(status); + ata_qc_complete(qc); + handled = 1; + + } else { + ap->stats.idle_irq++; + } + + return handled; +} + +static void pdc20621_irq_clear(struct ata_port *ap) +{ + ioread8(ap->ioaddr.status_addr); +} + +static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + struct ata_port *ap; + u32 mask = 0; + unsigned int i, tmp, port_no; + unsigned int handled = 0; + void __iomem *mmio_base; + + VPRINTK("ENTER\n"); + + if (!host || !host->iomap[PDC_MMIO_BAR]) { + VPRINTK("QUICK EXIT\n"); + return IRQ_NONE; + } + + mmio_base = host->iomap[PDC_MMIO_BAR]; + + /* reading should also clear interrupts */ + mmio_base += PDC_CHIP0_OFS; + mask = readl(mmio_base + PDC_20621_SEQMASK); + VPRINTK("mask == 0x%x\n", mask); + + if (mask == 0xffffffff) { + VPRINTK("QUICK EXIT 2\n"); + return IRQ_NONE; + } + mask &= 0xffff; /* only 16 tags possible */ + if (!mask) { + VPRINTK("QUICK EXIT 3\n"); + return IRQ_NONE; + } + + spin_lock(&host->lock); + + for (i = 1; i < 9; i++) { + port_no = i - 1; + if (port_no > 3) + port_no -= 4; + if (port_no >= host->n_ports) + ap = NULL; + else + ap = host->ports[port_no]; + tmp = mask & (1 << i); + VPRINTK("seq %u, port_no %u, ap %p, tmp %x\n", i, port_no, ap, tmp); + if (tmp && ap) { + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) + handled += pdc20621_host_intr(ap, qc, (i > 4), + mmio_base); + } + } + + spin_unlock(&host->lock); + + VPRINTK("mask == 0x%x\n", mask); + + VPRINTK("EXIT\n"); + + return IRQ_RETVAL(handled); +} + +static void pdc_freeze(struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.cmd_addr; + u32 tmp; + + /* FIXME: if all 4 ATA engines are stopped, also stop HDMA engine */ + + tmp = readl(mmio + PDC_CTLSTAT); + tmp |= PDC_MASK_INT; + tmp &= ~PDC_DMA_ENABLE; + writel(tmp, mmio + PDC_CTLSTAT); + readl(mmio + PDC_CTLSTAT); /* flush */ +} + +static void pdc_thaw(struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.cmd_addr; + u32 tmp; + + /* FIXME: start HDMA engine, if zero ATA engines running */ + + /* clear IRQ */ + ioread8(ap->ioaddr.status_addr); + + /* turn IRQ back on */ + tmp = readl(mmio + PDC_CTLSTAT); + tmp &= ~PDC_MASK_INT; + writel(tmp, mmio + PDC_CTLSTAT); + readl(mmio + PDC_CTLSTAT); /* flush */ +} + +static void pdc_reset_port(struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT; + unsigned int i; + u32 tmp; + + /* FIXME: handle HDMA copy engine */ + + for (i = 11; i > 0; i--) { + tmp = readl(mmio); + if (tmp & PDC_RESET) + break; + + udelay(100); + + tmp |= PDC_RESET; + writel(tmp, mmio); + } + + tmp &= ~PDC_RESET; + writel(tmp, mmio); + readl(mmio); /* flush */ +} + +static int pdc_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + pdc_reset_port(link->ap); + return ata_sff_softreset(link, class, deadline); +} + +static void pdc_error_handler(struct ata_port *ap) +{ + if (!(ap->pflags & ATA_PFLAG_FROZEN)) + pdc_reset_port(ap); + + ata_sff_error_handler(ap); +} + +static void pdc_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* make DMA engine forget about the failed command */ + if (qc->flags & ATA_QCFLAG_FAILED) + pdc_reset_port(ap); +} + +static int pdc_check_atapi_dma(struct ata_queued_cmd *qc) +{ + u8 *scsicmd = qc->scsicmd->cmnd; + int pio = 1; /* atapi dma off by default */ + + /* Whitelist commands that may use DMA. */ + switch (scsicmd[0]) { + case WRITE_12: + case WRITE_10: + case WRITE_6: + case READ_12: + case READ_10: + case READ_6: + case 0xad: /* READ_DVD_STRUCTURE */ + case 0xbe: /* READ_CD */ + pio = 0; + } + /* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */ + if (scsicmd[0] == WRITE_10) { + unsigned int lba = + (scsicmd[2] << 24) | + (scsicmd[3] << 16) | + (scsicmd[4] << 8) | + scsicmd[5]; + if (lba >= 0xFFFF4FA2) + pio = 1; + } + return pio; +} + +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + WARN_ON(tf->protocol == ATA_PROT_DMA || + tf->protocol == ATAPI_PROT_DMA); + ata_sff_tf_load(ap, tf); +} + + +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + WARN_ON(tf->protocol == ATA_PROT_DMA || + tf->protocol == ATAPI_PROT_DMA); + ata_sff_exec_command(ap, tf); +} + + +static void pdc_sata_setup_port(struct ata_ioports *port, void __iomem *base) +{ + port->cmd_addr = base; + port->data_addr = base; + port->feature_addr = + port->error_addr = base + 0x4; + port->nsect_addr = base + 0x8; + port->lbal_addr = base + 0xc; + port->lbam_addr = base + 0x10; + port->lbah_addr = base + 0x14; + port->device_addr = base + 0x18; + port->command_addr = + port->status_addr = base + 0x1c; + port->altstatus_addr = + port->ctl_addr = base + 0x38; +} + + +#ifdef ATA_VERBOSE_DEBUG +static void pdc20621_get_from_dimm(struct ata_host *host, void *psource, + u32 offset, u32 size) +{ + u32 window_size; + u16 idx; + u8 page_mask; + long dist; + void __iomem *mmio = host->iomap[PDC_MMIO_BAR]; + void __iomem *dimm_mmio = host->iomap[PDC_DIMM_BAR]; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + page_mask = 0x00; + window_size = 0x2000 * 4; /* 32K byte uchar size */ + idx = (u16) (offset / window_size); + + writel(0x01, mmio + PDC_GENERAL_CTLR); + readl(mmio + PDC_GENERAL_CTLR); + writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); + readl(mmio + PDC_DIMM_WINDOW_CTLR); + + offset -= (idx * window_size); + idx++; + dist = ((long) (window_size - (offset + size))) >= 0 ? size : + (long) (window_size - offset); + memcpy_fromio(psource, dimm_mmio + offset / 4, dist); + + psource += dist; + size -= dist; + for (; (long) size >= (long) window_size ;) { + writel(0x01, mmio + PDC_GENERAL_CTLR); + readl(mmio + PDC_GENERAL_CTLR); + writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); + readl(mmio + PDC_DIMM_WINDOW_CTLR); + memcpy_fromio(psource, dimm_mmio, window_size / 4); + psource += window_size; + size -= window_size; + idx++; + } + + if (size) { + writel(0x01, mmio + PDC_GENERAL_CTLR); + readl(mmio + PDC_GENERAL_CTLR); + writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); + readl(mmio + PDC_DIMM_WINDOW_CTLR); + memcpy_fromio(psource, dimm_mmio, size / 4); + } +} +#endif + + +static void pdc20621_put_to_dimm(struct ata_host *host, void *psource, + u32 offset, u32 size) +{ + u32 window_size; + u16 idx; + u8 page_mask; + long dist; + void __iomem *mmio = host->iomap[PDC_MMIO_BAR]; + void __iomem *dimm_mmio = host->iomap[PDC_DIMM_BAR]; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + page_mask = 0x00; + window_size = 0x2000 * 4; /* 32K byte uchar size */ + idx = (u16) (offset / window_size); + + writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); + readl(mmio + PDC_DIMM_WINDOW_CTLR); + offset -= (idx * window_size); + idx++; + dist = ((long)(s32)(window_size - (offset + size))) >= 0 ? size : + (long) (window_size - offset); + memcpy_toio(dimm_mmio + offset / 4, psource, dist); + writel(0x01, mmio + PDC_GENERAL_CTLR); + readl(mmio + PDC_GENERAL_CTLR); + + psource += dist; + size -= dist; + for (; (long) size >= (long) window_size ;) { + writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); + readl(mmio + PDC_DIMM_WINDOW_CTLR); + memcpy_toio(dimm_mmio, psource, window_size / 4); + writel(0x01, mmio + PDC_GENERAL_CTLR); + readl(mmio + PDC_GENERAL_CTLR); + psource += window_size; + size -= window_size; + idx++; + } + + if (size) { + writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); + readl(mmio + PDC_DIMM_WINDOW_CTLR); + memcpy_toio(dimm_mmio, psource, size / 4); + writel(0x01, mmio + PDC_GENERAL_CTLR); + readl(mmio + PDC_GENERAL_CTLR); + } +} + + +static unsigned int pdc20621_i2c_read(struct ata_host *host, u32 device, + u32 subaddr, u32 *pdata) +{ + void __iomem *mmio = host->iomap[PDC_MMIO_BAR]; + u32 i2creg = 0; + u32 status; + u32 count = 0; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + i2creg |= device << 24; + i2creg |= subaddr << 16; + + /* Set the device and subaddress */ + writel(i2creg, mmio + PDC_I2C_ADDR_DATA); + readl(mmio + PDC_I2C_ADDR_DATA); + + /* Write Control to perform read operation, mask int */ + writel(PDC_I2C_READ | PDC_I2C_START | PDC_I2C_MASK_INT, + mmio + PDC_I2C_CONTROL); + + for (count = 0; count <= 1000; count ++) { + status = readl(mmio + PDC_I2C_CONTROL); + if (status & PDC_I2C_COMPLETE) { + status = readl(mmio + PDC_I2C_ADDR_DATA); + break; + } else if (count == 1000) + return 0; + } + + *pdata = (status >> 8) & 0x000000ff; + return 1; +} + + +static int pdc20621_detect_dimm(struct ata_host *host) +{ + u32 data = 0; + if (pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, + PDC_DIMM_SPD_SYSTEM_FREQ, &data)) { + if (data == 100) + return 100; + } else + return 0; + + if (pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) { + if (data <= 0x75) + return 133; + } else + return 0; + + return 0; +} + + +static int pdc20621_prog_dimm0(struct ata_host *host) +{ + u32 spd0[50]; + u32 data = 0; + int size, i; + u8 bdimmsize; + void __iomem *mmio = host->iomap[PDC_MMIO_BAR]; + static const struct { + unsigned int reg; + unsigned int ofs; + } pdc_i2c_read_data [] = { + { PDC_DIMM_SPD_TYPE, 11 }, + { PDC_DIMM_SPD_FRESH_RATE, 12 }, + { PDC_DIMM_SPD_COLUMN_NUM, 4 }, + { PDC_DIMM_SPD_ATTRIBUTE, 21 }, + { PDC_DIMM_SPD_ROW_NUM, 3 }, + { PDC_DIMM_SPD_BANK_NUM, 17 }, + { PDC_DIMM_SPD_MODULE_ROW, 5 }, + { PDC_DIMM_SPD_ROW_PRE_CHARGE, 27 }, + { PDC_DIMM_SPD_ROW_ACTIVE_DELAY, 28 }, + { PDC_DIMM_SPD_RAS_CAS_DELAY, 29 }, + { PDC_DIMM_SPD_ACTIVE_PRECHARGE, 30 }, + { PDC_DIMM_SPD_CAS_LATENCY, 18 }, + }; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + for (i = 0; i < ARRAY_SIZE(pdc_i2c_read_data); i++) + pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, + pdc_i2c_read_data[i].reg, + &spd0[pdc_i2c_read_data[i].ofs]); + + data |= (spd0[4] - 8) | ((spd0[21] != 0) << 3) | ((spd0[3]-11) << 4); + data |= ((spd0[17] / 4) << 6) | ((spd0[5] / 2) << 7) | + ((((spd0[27] + 9) / 10) - 1) << 8) ; + data |= (((((spd0[29] > spd0[28]) + ? spd0[29] : spd0[28]) + 9) / 10) - 1) << 10; + data |= ((spd0[30] - spd0[29] + 9) / 10 - 2) << 12; + + if (spd0[18] & 0x08) + data |= ((0x03) << 14); + else if (spd0[18] & 0x04) + data |= ((0x02) << 14); + else if (spd0[18] & 0x01) + data |= ((0x01) << 14); + else + data |= (0 << 14); + + /* + Calculate the size of bDIMMSize (power of 2) and + merge the DIMM size by program start/end address. + */ + + bdimmsize = spd0[4] + (spd0[5] / 2) + spd0[3] + (spd0[17] / 2) + 3; + size = (1 << bdimmsize) >> 20; /* size = xxx(MB) */ + data |= (((size / 16) - 1) << 16); + data |= (0 << 23); + data |= 8; + writel(data, mmio + PDC_DIMM0_CONTROL); + readl(mmio + PDC_DIMM0_CONTROL); + return size; +} + + +static unsigned int pdc20621_prog_dimm_global(struct ata_host *host) +{ + u32 data, spd0; + int error, i; + void __iomem *mmio = host->iomap[PDC_MMIO_BAR]; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + /* + Set To Default : DIMM Module Global Control Register (0x022259F1) + DIMM Arbitration Disable (bit 20) + DIMM Data/Control Output Driving Selection (bit12 - bit15) + Refresh Enable (bit 17) + */ + + data = 0x022259F1; + writel(data, mmio + PDC_SDRAM_CONTROL); + readl(mmio + PDC_SDRAM_CONTROL); + + /* Turn on for ECC */ + pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, + PDC_DIMM_SPD_TYPE, &spd0); + if (spd0 == 0x02) { + data |= (0x01 << 16); + writel(data, mmio + PDC_SDRAM_CONTROL); + readl(mmio + PDC_SDRAM_CONTROL); + printk(KERN_ERR "Local DIMM ECC Enabled\n"); + } + + /* DIMM Initialization Select/Enable (bit 18/19) */ + data &= (~(1<<18)); + data |= (1<<19); + writel(data, mmio + PDC_SDRAM_CONTROL); + + error = 1; + for (i = 1; i <= 10; i++) { /* polling ~5 secs */ + data = readl(mmio + PDC_SDRAM_CONTROL); + if (!(data & (1<<19))) { + error = 0; + break; + } + msleep(i*100); + } + return error; +} + + +static unsigned int pdc20621_dimm_init(struct ata_host *host) +{ + int speed, size, length; + u32 addr, spd0, pci_status; + u32 time_period = 0; + u32 tcount = 0; + u32 ticks = 0; + u32 clock = 0; + u32 fparam = 0; + void __iomem *mmio = host->iomap[PDC_MMIO_BAR]; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + /* Initialize PLL based upon PCI Bus Frequency */ + + /* Initialize Time Period Register */ + writel(0xffffffff, mmio + PDC_TIME_PERIOD); + time_period = readl(mmio + PDC_TIME_PERIOD); + VPRINTK("Time Period Register (0x40): 0x%x\n", time_period); + + /* Enable timer */ + writel(PDC_TIMER_DEFAULT, mmio + PDC_TIME_CONTROL); + readl(mmio + PDC_TIME_CONTROL); + + /* Wait 3 seconds */ + msleep(3000); + + /* + When timer is enabled, counter is decreased every internal + clock cycle. + */ + + tcount = readl(mmio + PDC_TIME_COUNTER); + VPRINTK("Time Counter Register (0x44): 0x%x\n", tcount); + + /* + If SX4 is on PCI-X bus, after 3 seconds, the timer counter + register should be >= (0xffffffff - 3x10^8). + */ + if (tcount >= PCI_X_TCOUNT) { + ticks = (time_period - tcount); + VPRINTK("Num counters 0x%x (%d)\n", ticks, ticks); + + clock = (ticks / 300000); + VPRINTK("10 * Internal clk = 0x%x (%d)\n", clock, clock); + + clock = (clock * 33); + VPRINTK("10 * Internal clk * 33 = 0x%x (%d)\n", clock, clock); + + /* PLL F Param (bit 22:16) */ + fparam = (1400000 / clock) - 2; + VPRINTK("PLL F Param: 0x%x (%d)\n", fparam, fparam); + + /* OD param = 0x2 (bit 31:30), R param = 0x5 (bit 29:25) */ + pci_status = (0x8a001824 | (fparam << 16)); + } else + pci_status = PCI_PLL_INIT; + + /* Initialize PLL. */ + VPRINTK("pci_status: 0x%x\n", pci_status); + writel(pci_status, mmio + PDC_CTL_STATUS); + readl(mmio + PDC_CTL_STATUS); + + /* + Read SPD of DIMM by I2C interface, + and program the DIMM Module Controller. + */ + if (!(speed = pdc20621_detect_dimm(host))) { + printk(KERN_ERR "Detect Local DIMM Fail\n"); + return 1; /* DIMM error */ + } + VPRINTK("Local DIMM Speed = %d\n", speed); + + /* Programming DIMM0 Module Control Register (index_CID0:80h) */ + size = pdc20621_prog_dimm0(host); + VPRINTK("Local DIMM Size = %dMB\n", size); + + /* Programming DIMM Module Global Control Register (index_CID0:88h) */ + if (pdc20621_prog_dimm_global(host)) { + printk(KERN_ERR "Programming DIMM Module Global Control Register Fail\n"); + return 1; + } + +#ifdef ATA_VERBOSE_DEBUG + { + u8 test_parttern1[40] = + {0x55,0xAA,'P','r','o','m','i','s','e',' ', + 'N','o','t',' ','Y','e','t',' ', + 'D','e','f','i','n','e','d',' ', + '1','.','1','0', + '9','8','0','3','1','6','1','2',0,0}; + u8 test_parttern2[40] = {0}; + + pdc20621_put_to_dimm(host, test_parttern2, 0x10040, 40); + pdc20621_put_to_dimm(host, test_parttern2, 0x40, 40); + + pdc20621_put_to_dimm(host, test_parttern1, 0x10040, 40); + pdc20621_get_from_dimm(host, test_parttern2, 0x40, 40); + printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], + test_parttern2[1], &(test_parttern2[2])); + pdc20621_get_from_dimm(host, test_parttern2, 0x10040, + 40); + printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], + test_parttern2[1], &(test_parttern2[2])); + + pdc20621_put_to_dimm(host, test_parttern1, 0x40, 40); + pdc20621_get_from_dimm(host, test_parttern2, 0x40, 40); + printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], + test_parttern2[1], &(test_parttern2[2])); + } +#endif + + /* ECC initiliazation. */ + + pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, + PDC_DIMM_SPD_TYPE, &spd0); + if (spd0 == 0x02) { + void *buf; + VPRINTK("Start ECC initialization\n"); + addr = 0; + length = size * 1024 * 1024; + buf = kzalloc(ECC_ERASE_BUF_SZ, GFP_KERNEL); + while (addr < length) { + pdc20621_put_to_dimm(host, buf, addr, + ECC_ERASE_BUF_SZ); + addr += ECC_ERASE_BUF_SZ; + } + kfree(buf); + VPRINTK("Finish ECC initialization\n"); + } + return 0; +} + + +static void pdc_20621_init(struct ata_host *host) +{ + u32 tmp; + void __iomem *mmio = host->iomap[PDC_MMIO_BAR]; + + /* hard-code chip #0 */ + mmio += PDC_CHIP0_OFS; + + /* + * Select page 0x40 for our 32k DIMM window + */ + tmp = readl(mmio + PDC_20621_DIMM_WINDOW) & 0xffff0000; + tmp |= PDC_PAGE_WINDOW; /* page 40h; arbitrarily selected */ + writel(tmp, mmio + PDC_20621_DIMM_WINDOW); + + /* + * Reset Host DMA + */ + tmp = readl(mmio + PDC_HDMA_CTLSTAT); + tmp |= PDC_RESET; + writel(tmp, mmio + PDC_HDMA_CTLSTAT); + readl(mmio + PDC_HDMA_CTLSTAT); /* flush */ + + udelay(10); + + tmp = readl(mmio + PDC_HDMA_CTLSTAT); + tmp &= ~PDC_RESET; + writel(tmp, mmio + PDC_HDMA_CTLSTAT); + readl(mmio + PDC_HDMA_CTLSTAT); /* flush */ +} + +static int pdc_sata_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + const struct ata_port_info *ppi[] = + { &pdc_port_info[ent->driver_data], NULL }; + struct ata_host *host; + struct pdc_host_priv *hpriv; + int i, rc; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* allocate host */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4); + hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); + if (!host || !hpriv) + return -ENOMEM; + + host->private_data = hpriv; + + /* acquire resources and fill host */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + rc = pcim_iomap_regions(pdev, (1 << PDC_MMIO_BAR) | (1 << PDC_DIMM_BAR), + DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + host->iomap = pcim_iomap_table(pdev); + + for (i = 0; i < 4; i++) { + struct ata_port *ap = host->ports[i]; + void __iomem *base = host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS; + unsigned int offset = 0x200 + i * 0x80; + + pdc_sata_setup_port(&ap->ioaddr, base + offset); + + ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, PDC_DIMM_BAR, -1, "dimm"); + ata_port_pbar_desc(ap, PDC_MMIO_BAR, offset, "port"); + } + + /* configure and activate */ + rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + + if (pdc20621_dimm_init(host)) + return -ENOMEM; + pdc_20621_init(host); + + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, pdc20621_interrupt, + IRQF_SHARED, &pdc_sata_sht); +} + +module_pci_driver(pdc_sata_pci_driver); + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("Promise SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, pdc_sata_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c new file mode 100644 index 000000000..08f98c3ed --- /dev/null +++ b/drivers/ata/sata_uli.c @@ -0,0 +1,245 @@ +/* + * sata_uli.c - ULi Electronics SATA + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_uli" +#define DRV_VERSION "1.3" + +enum { + uli_5289 = 0, + uli_5287 = 1, + uli_5281 = 2, + + uli_max_ports = 4, + + /* PCI configuration registers */ + ULI5287_BASE = 0x90, /* sata0 phy SCR registers */ + ULI5287_OFFS = 0x10, /* offset from sata0->sata1 phy regs */ + ULI5281_BASE = 0x60, /* sata0 phy SCR registers */ + ULI5281_OFFS = 0x60, /* offset from sata0->sata1 phy regs */ +}; + +struct uli_priv { + unsigned int scr_cfg_addr[uli_max_ports]; +}; + +static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static int uli_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); +static int uli_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); + +static const struct pci_device_id uli_pci_tbl[] = { + { PCI_VDEVICE(AL, 0x5289), uli_5289 }, + { PCI_VDEVICE(AL, 0x5287), uli_5287 }, + { PCI_VDEVICE(AL, 0x5281), uli_5281 }, + + { } /* terminate list */ +}; + +static struct pci_driver uli_pci_driver = { + .name = DRV_NAME, + .id_table = uli_pci_tbl, + .probe = uli_init_one, + .remove = ata_pci_remove_one, +}; + +static struct scsi_host_template uli_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations uli_ops = { + .inherits = &ata_bmdma_port_ops, + .scr_read = uli_scr_read, + .scr_write = uli_scr_write, + .hardreset = ATA_OP_NULL, +}; + +static const struct ata_port_info uli_port_info = { + .flags = ATA_FLAG_SATA | ATA_FLAG_IGN_SIMPLEX, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &uli_ops, +}; + + +MODULE_AUTHOR("Peer Chen"); +MODULE_DESCRIPTION("low-level driver for ULi Electronics SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, uli_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg) +{ + struct uli_priv *hpriv = ap->host->private_data; + return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg); +} + +static u32 uli_scr_cfg_read(struct ata_link *link, unsigned int sc_reg) +{ + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + unsigned int cfg_addr = get_scr_cfg_addr(link->ap, sc_reg); + u32 val; + + pci_read_config_dword(pdev, cfg_addr, &val); + return val; +} + +static void uli_scr_cfg_write(struct ata_link *link, unsigned int scr, u32 val) +{ + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + unsigned int cfg_addr = get_scr_cfg_addr(link->ap, scr); + + pci_write_config_dword(pdev, cfg_addr, val); +} + +static int uli_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) +{ + if (sc_reg > SCR_CONTROL) + return -EINVAL; + + *val = uli_scr_cfg_read(link, sc_reg); + return 0; +} + +static int uli_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) +{ + if (sc_reg > SCR_CONTROL) //SCR_CONTROL=2, SCR_ERROR=1, SCR_STATUS=0 + return -EINVAL; + + uli_scr_cfg_write(link, sc_reg, val); + return 0; +} + +static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + const struct ata_port_info *ppi[] = { &uli_port_info, NULL }; + unsigned int board_idx = (unsigned int) ent->driver_data; + struct ata_host *host; + struct uli_priv *hpriv; + void __iomem * const *iomap; + struct ata_ioports *ioaddr; + int n_ports, rc; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + n_ports = 2; + if (board_idx == uli_5287) + n_ports = 4; + + /* allocate the host */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + if (!host) + return -ENOMEM; + + hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + host->private_data = hpriv; + + /* the first two ports are standard SFF */ + rc = ata_pci_sff_init_host(host); + if (rc) + return rc; + + ata_pci_bmdma_init(host); + + iomap = host->iomap; + + switch (board_idx) { + case uli_5287: + /* If there are four, the last two live right after + * the standard SFF ports. + */ + hpriv->scr_cfg_addr[0] = ULI5287_BASE; + hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; + + ioaddr = &host->ports[2]->ioaddr; + ioaddr->cmd_addr = iomap[0] + 8; + ioaddr->altstatus_addr = + ioaddr->ctl_addr = (void __iomem *) + ((unsigned long)iomap[1] | ATA_PCI_CTL_OFS) + 4; + ioaddr->bmdma_addr = iomap[4] + 16; + hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4; + ata_sff_std_ports(ioaddr); + + ata_port_desc(host->ports[2], + "cmd 0x%llx ctl 0x%llx bmdma 0x%llx", + (unsigned long long)pci_resource_start(pdev, 0) + 8, + ((unsigned long long)pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4, + (unsigned long long)pci_resource_start(pdev, 4) + 16); + + ioaddr = &host->ports[3]->ioaddr; + ioaddr->cmd_addr = iomap[2] + 8; + ioaddr->altstatus_addr = + ioaddr->ctl_addr = (void __iomem *) + ((unsigned long)iomap[3] | ATA_PCI_CTL_OFS) + 4; + ioaddr->bmdma_addr = iomap[4] + 24; + hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5; + ata_sff_std_ports(ioaddr); + + ata_port_desc(host->ports[2], + "cmd 0x%llx ctl 0x%llx bmdma 0x%llx", + (unsigned long long)pci_resource_start(pdev, 2) + 9, + ((unsigned long long)pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4, + (unsigned long long)pci_resource_start(pdev, 4) + 24); + + break; + + case uli_5289: + hpriv->scr_cfg_addr[0] = ULI5287_BASE; + hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; + break; + + case uli_5281: + hpriv->scr_cfg_addr[0] = ULI5281_BASE; + hpriv->scr_cfg_addr[1] = ULI5281_BASE + ULI5281_OFFS; + break; + + default: + BUG(); + break; + } + + pci_set_master(pdev); + pci_intx(pdev, 1); + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, + IRQF_SHARED, &uli_sht); +} + +module_pci_driver(uli_pci_driver); diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c new file mode 100644 index 000000000..17d31fc00 --- /dev/null +++ b/drivers/ata/sata_via.c @@ -0,0 +1,657 @@ +/* + * sata_via.c - VIA Serial ATA controllers + * + * Maintained by: Tejun Heo + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2004 Red Hat, Inc. All rights reserved. + * Copyright 2003-2004 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. + * + * + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_via" +#define DRV_VERSION "2.6" + +/* + * vt8251 is different from other sata controllers of VIA. It has two + * channels, each channel has both Master and Slave slot. + */ +enum board_ids_enum { + vt6420, + vt6421, + vt8251, +}; + +enum { + SATA_CHAN_ENAB = 0x40, /* SATA channel enable */ + SATA_INT_GATE = 0x41, /* SATA interrupt gating */ + SATA_NATIVE_MODE = 0x42, /* Native mode enable */ + PATA_UDMA_TIMING = 0xB3, /* PATA timing for DMA/ cable detect */ + PATA_PIO_TIMING = 0xAB, /* PATA timing register */ + + PORT0 = (1 << 1), + PORT1 = (1 << 0), + ALL_PORTS = PORT0 | PORT1, + + NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4), + + SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */ +}; + +static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); +static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val); +static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val); +static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); +static void svia_noop_freeze(struct ata_port *ap); +static int vt6420_prereset(struct ata_link *link, unsigned long deadline); +static void vt6420_bmdma_start(struct ata_queued_cmd *qc); +static int vt6421_pata_cable_detect(struct ata_port *ap); +static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev); +static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev); + +static const struct pci_device_id svia_pci_tbl[] = { + { PCI_VDEVICE(VIA, 0x5337), vt6420 }, + { PCI_VDEVICE(VIA, 0x0591), vt6420 }, /* 2 sata chnls (Master) */ + { PCI_VDEVICE(VIA, 0x3149), vt6420 }, /* 2 sata chnls (Master) */ + { PCI_VDEVICE(VIA, 0x3249), vt6421 }, /* 2 sata chnls, 1 pata chnl */ + { PCI_VDEVICE(VIA, 0x5372), vt6420 }, + { PCI_VDEVICE(VIA, 0x7372), vt6420 }, + { PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */ + { PCI_VDEVICE(VIA, 0x9000), vt8251 }, + + { } /* terminate list */ +}; + +static struct pci_driver svia_pci_driver = { + .name = DRV_NAME, + .id_table = svia_pci_tbl, + .probe = svia_init_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif + .remove = ata_pci_remove_one, +}; + +static struct scsi_host_template svia_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations svia_base_ops = { + .inherits = &ata_bmdma_port_ops, + .sff_tf_load = svia_tf_load, +}; + +static struct ata_port_operations vt6420_sata_ops = { + .inherits = &svia_base_ops, + .freeze = svia_noop_freeze, + .prereset = vt6420_prereset, + .bmdma_start = vt6420_bmdma_start, +}; + +static struct ata_port_operations vt6421_pata_ops = { + .inherits = &svia_base_ops, + .cable_detect = vt6421_pata_cable_detect, + .set_piomode = vt6421_set_pio_mode, + .set_dmamode = vt6421_set_dma_mode, +}; + +static struct ata_port_operations vt6421_sata_ops = { + .inherits = &svia_base_ops, + .scr_read = svia_scr_read, + .scr_write = svia_scr_write, +}; + +static struct ata_port_operations vt8251_ops = { + .inherits = &svia_base_ops, + .hardreset = sata_std_hardreset, + .scr_read = vt8251_scr_read, + .scr_write = vt8251_scr_write, +}; + +static const struct ata_port_info vt6420_port_info = { + .flags = ATA_FLAG_SATA, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &vt6420_sata_ops, +}; + +static struct ata_port_info vt6421_sport_info = { + .flags = ATA_FLAG_SATA, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &vt6421_sata_ops, +}; + +static struct ata_port_info vt6421_pport_info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + /* No MWDMA */ + .udma_mask = ATA_UDMA6, + .port_ops = &vt6421_pata_ops, +}; + +static struct ata_port_info vt8251_port_info = { + .flags = ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &vt8251_ops, +}; + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, svia_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) +{ + if (sc_reg > SCR_CONTROL) + return -EINVAL; + *val = ioread32(link->ap->ioaddr.scr_addr + (4 * sc_reg)); + return 0; +} + +static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) +{ + if (sc_reg > SCR_CONTROL) + return -EINVAL; + iowrite32(val, link->ap->ioaddr.scr_addr + (4 * sc_reg)); + return 0; +} + +static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val) +{ + static const u8 ipm_tbl[] = { 1, 2, 6, 0 }; + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + int slot = 2 * link->ap->port_no + link->pmp; + u32 v = 0; + u8 raw; + + switch (scr) { + case SCR_STATUS: + pci_read_config_byte(pdev, 0xA0 + slot, &raw); + + /* read the DET field, bit0 and 1 of the config byte */ + v |= raw & 0x03; + + /* read the SPD field, bit4 of the configure byte */ + if (raw & (1 << 4)) + v |= 0x02 << 4; + else + v |= 0x01 << 4; + + /* read the IPM field, bit2 and 3 of the config byte */ + v |= ipm_tbl[(raw >> 2) & 0x3]; + break; + + case SCR_ERROR: + /* devices other than 5287 uses 0xA8 as base */ + WARN_ON(pdev->device != 0x5287); + pci_read_config_dword(pdev, 0xB0 + slot * 4, &v); + break; + + case SCR_CONTROL: + pci_read_config_byte(pdev, 0xA4 + slot, &raw); + + /* read the DET field, bit0 and bit1 */ + v |= ((raw & 0x02) << 1) | (raw & 0x01); + + /* read the IPM field, bit2 and bit3 */ + v |= ((raw >> 2) & 0x03) << 8; + break; + + default: + return -EINVAL; + } + + *val = v; + return 0; +} + +static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val) +{ + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + int slot = 2 * link->ap->port_no + link->pmp; + u32 v = 0; + + switch (scr) { + case SCR_ERROR: + /* devices other than 5287 uses 0xA8 as base */ + WARN_ON(pdev->device != 0x5287); + pci_write_config_dword(pdev, 0xB0 + slot * 4, val); + return 0; + + case SCR_CONTROL: + /* set the DET field */ + v |= ((val & 0x4) >> 1) | (val & 0x1); + + /* set the IPM field */ + v |= ((val >> 8) & 0x3) << 2; + + pci_write_config_byte(pdev, 0xA4 + slot, v); + return 0; + + default: + return -EINVAL; + } +} + +/** + * svia_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller. + * + * This is to fix the internal bug of via chipsets, which will + * reset the device register after changing the IEN bit on ctl + * register. + */ +static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_taskfile ttf; + + if (tf->ctl != ap->last_ctl) { + ttf = *tf; + ttf.flags |= ATA_TFLAG_DEVICE; + tf = &ttf; + } + ata_sff_tf_load(ap, tf); +} + +static void svia_noop_freeze(struct ata_port *ap) +{ + /* Some VIA controllers choke if ATA_NIEN is manipulated in + * certain way. Leave it alone and just clear pending IRQ. + */ + ap->ops->sff_check_status(ap); + ata_bmdma_irq_clear(ap); +} + +/** + * vt6420_prereset - prereset for vt6420 + * @link: target ATA link + * @deadline: deadline jiffies for the operation + * + * SCR registers on vt6420 are pieces of shit and may hang the + * whole machine completely if accessed with the wrong timing. + * To avoid such catastrophe, vt6420 doesn't provide generic SCR + * access operations, but uses SStatus and SControl only during + * boot probing in controlled way. + * + * As the old (pre EH update) probing code is proven to work, we + * strictly follow the access pattern. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +static int vt6420_prereset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &ap->link.eh_context; + unsigned long timeout = jiffies + (HZ * 5); + u32 sstatus, scontrol; + int online; + + /* don't do any SCR stuff if we're not loading */ + if (!(ap->pflags & ATA_PFLAG_LOADING)) + goto skip_scr; + + /* Resume phy. This is the old SATA resume sequence */ + svia_scr_write(link, SCR_CONTROL, 0x300); + svia_scr_read(link, SCR_CONTROL, &scontrol); /* flush */ + + /* wait for phy to become ready, if necessary */ + do { + ata_msleep(link->ap, 200); + svia_scr_read(link, SCR_STATUS, &sstatus); + if ((sstatus & 0xf) != 1) + break; + } while (time_before(jiffies, timeout)); + + /* open code sata_print_link_status() */ + svia_scr_read(link, SCR_STATUS, &sstatus); + svia_scr_read(link, SCR_CONTROL, &scontrol); + + online = (sstatus & 0xf) == 0x3; + + ata_port_info(ap, + "SATA link %s 1.5 Gbps (SStatus %X SControl %X)\n", + online ? "up" : "down", sstatus, scontrol); + + /* SStatus is read one more time */ + svia_scr_read(link, SCR_STATUS, &sstatus); + + if (!online) { + /* tell EH to bail */ + ehc->i.action &= ~ATA_EH_RESET; + return 0; + } + + skip_scr: + /* wait for !BSY */ + ata_sff_wait_ready(link, deadline); + + return 0; +} + +static void vt6420_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + if ((qc->tf.command == ATA_CMD_PACKET) && + (qc->scsicmd->sc_data_direction == DMA_TO_DEVICE)) { + /* Prevents corruption on some ATAPI burners */ + ata_sff_pause(ap); + } + ata_bmdma_start(qc); +} + +static int vt6421_pata_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 tmp; + + pci_read_config_byte(pdev, PATA_UDMA_TIMING, &tmp); + if (tmp & 0x10) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + +static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const u8 pio_bits[] = { 0xA8, 0x65, 0x65, 0x31, 0x20 }; + pci_write_config_byte(pdev, PATA_PIO_TIMING - adev->devno, + pio_bits[adev->pio_mode - XFER_PIO_0]); +} + +static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const u8 udma_bits[] = { 0xEE, 0xE8, 0xE6, 0xE4, 0xE2, 0xE1, 0xE0, 0xE0 }; + pci_write_config_byte(pdev, PATA_UDMA_TIMING - adev->devno, + udma_bits[adev->dma_mode - XFER_UDMA_0]); +} + +static const unsigned int svia_bar_sizes[] = { + 8, 4, 8, 4, 16, 256 +}; + +static const unsigned int vt6421_bar_sizes[] = { + 16, 16, 16, 16, 32, 128 +}; + +static void __iomem *svia_scr_addr(void __iomem *addr, unsigned int port) +{ + return addr + (port * 128); +} + +static void __iomem *vt6421_scr_addr(void __iomem *addr, unsigned int port) +{ + return addr + (port * 64); +} + +static void vt6421_init_addrs(struct ata_port *ap) +{ + void __iomem * const * iomap = ap->host->iomap; + void __iomem *reg_addr = iomap[ap->port_no]; + void __iomem *bmdma_addr = iomap[4] + (ap->port_no * 8); + struct ata_ioports *ioaddr = &ap->ioaddr; + + ioaddr->cmd_addr = reg_addr; + ioaddr->altstatus_addr = + ioaddr->ctl_addr = (void __iomem *) + ((unsigned long)(reg_addr + 8) | ATA_PCI_CTL_OFS); + ioaddr->bmdma_addr = bmdma_addr; + ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no); + + ata_sff_std_ports(ioaddr); + + ata_port_pbar_desc(ap, ap->port_no, -1, "port"); + ata_port_pbar_desc(ap, 4, ap->port_no * 8, "bmdma"); +} + +static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) +{ + const struct ata_port_info *ppi[] = { &vt6420_port_info, NULL }; + struct ata_host *host; + int rc; + + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); + if (rc) + return rc; + *r_host = host; + + rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME); + if (rc) { + dev_err(&pdev->dev, "failed to iomap PCI BAR 5\n"); + return rc; + } + + host->ports[0]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 0); + host->ports[1]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 1); + + return 0; +} + +static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) +{ + const struct ata_port_info *ppi[] = + { &vt6421_sport_info, &vt6421_sport_info, &vt6421_pport_info }; + struct ata_host *host; + int i, rc; + + *r_host = host = ata_host_alloc_pinfo(&pdev->dev, ppi, ARRAY_SIZE(ppi)); + if (!host) { + dev_err(&pdev->dev, "failed to allocate host\n"); + return -ENOMEM; + } + + rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME); + if (rc) { + dev_err(&pdev->dev, "failed to request/iomap PCI BARs (errno=%d)\n", + rc); + return rc; + } + host->iomap = pcim_iomap_table(pdev); + + for (i = 0; i < host->n_ports; i++) + vt6421_init_addrs(host->ports[i]); + + rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + + return 0; +} + +static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) +{ + const struct ata_port_info *ppi[] = { &vt8251_port_info, NULL }; + struct ata_host *host; + int i, rc; + + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); + if (rc) + return rc; + *r_host = host; + + rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME); + if (rc) { + dev_err(&pdev->dev, "failed to iomap PCI BAR 5\n"); + return rc; + } + + /* 8251 hosts four sata ports as M/S of the two channels */ + for (i = 0; i < host->n_ports; i++) + ata_slave_link_init(host->ports[i]); + + return 0; +} + +static void svia_configure(struct pci_dev *pdev, int board_id) +{ + u8 tmp8; + + pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8); + dev_info(&pdev->dev, "routed to hard irq line %d\n", + (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f); + + /* make sure SATA channels are enabled */ + pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8); + if ((tmp8 & ALL_PORTS) != ALL_PORTS) { + dev_dbg(&pdev->dev, "enabling SATA channels (0x%x)\n", + (int)tmp8); + tmp8 |= ALL_PORTS; + pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8); + } + + /* make sure interrupts for each channel sent to us */ + pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8); + if ((tmp8 & ALL_PORTS) != ALL_PORTS) { + dev_dbg(&pdev->dev, "enabling SATA channel interrupts (0x%x)\n", + (int) tmp8); + tmp8 |= ALL_PORTS; + pci_write_config_byte(pdev, SATA_INT_GATE, tmp8); + } + + /* make sure native mode is enabled */ + pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8); + if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) { + dev_dbg(&pdev->dev, + "enabling SATA channel native mode (0x%x)\n", + (int) tmp8); + tmp8 |= NATIVE_MODE_ALL; + pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); + } + + /* + * vt6420/1 has problems talking to some drives. The following + * is the fix from Joseph Chan . + * + * When host issues HOLD, device may send up to 20DW of data + * before acknowledging it with HOLDA and the host should be + * able to buffer them in FIFO. Unfortunately, some WD drives + * send up to 40DW before acknowledging HOLD and, in the + * default configuration, this ends up overflowing vt6421's + * FIFO, making the controller abort the transaction with + * R_ERR. + * + * Rx52[2] is the internal 128DW FIFO Flow control watermark + * adjusting mechanism enable bit and the default value 0 + * means host will issue HOLD to device when the left FIFO + * size goes below 32DW. Setting it to 1 makes the watermark + * 64DW. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=15173 + * http://article.gmane.org/gmane.linux.ide/46352 + * http://thread.gmane.org/gmane.linux.kernel/1062139 + */ + if (board_id == vt6420 || board_id == vt6421) { + pci_read_config_byte(pdev, 0x52, &tmp8); + tmp8 |= 1 << 2; + pci_write_config_byte(pdev, 0x52, tmp8); + } +} + +static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + unsigned int i; + int rc; + struct ata_host *host = NULL; + int board_id = (int) ent->driver_data; + const unsigned *bar_sizes; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + if (board_id == vt6421) + bar_sizes = &vt6421_bar_sizes[0]; + else + bar_sizes = &svia_bar_sizes[0]; + + for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++) + if ((pci_resource_start(pdev, i) == 0) || + (pci_resource_len(pdev, i) < bar_sizes[i])) { + dev_err(&pdev->dev, + "invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n", + i, + (unsigned long long)pci_resource_start(pdev, i), + (unsigned long long)pci_resource_len(pdev, i)); + return -ENODEV; + } + + switch (board_id) { + case vt6420: + rc = vt6420_prepare_host(pdev, &host); + break; + case vt6421: + rc = vt6421_prepare_host(pdev, &host); + break; + case vt8251: + rc = vt8251_prepare_host(pdev, &host); + break; + default: + rc = -EINVAL; + } + if (rc) + return rc; + + svia_configure(pdev, board_id); + + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, + IRQF_SHARED, &svia_sht); +} + +module_pci_driver(svia_pci_driver); diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c new file mode 100644 index 000000000..183eb5208 --- /dev/null +++ b/drivers/ata/sata_vsc.c @@ -0,0 +1,443 @@ +/* + * sata_vsc.c - Vitesse VSC7174 4 port DPA SATA + * + * Maintained by: Jeremy Higdon @ SGI + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2004 SGI + * + * Bits from Jeff Garzik, Copyright RedHat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Vitesse hardware documentation presumably available under NDA. + * Intel 31244 (same hardware interface) documentation presumably + * available from http://developer.intel.com/ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_vsc" +#define DRV_VERSION "2.3" + +enum { + VSC_MMIO_BAR = 0, + + /* Interrupt register offsets (from chip base address) */ + VSC_SATA_INT_STAT_OFFSET = 0x00, + VSC_SATA_INT_MASK_OFFSET = 0x04, + + /* Taskfile registers offsets */ + VSC_SATA_TF_CMD_OFFSET = 0x00, + VSC_SATA_TF_DATA_OFFSET = 0x00, + VSC_SATA_TF_ERROR_OFFSET = 0x04, + VSC_SATA_TF_FEATURE_OFFSET = 0x06, + VSC_SATA_TF_NSECT_OFFSET = 0x08, + VSC_SATA_TF_LBAL_OFFSET = 0x0c, + VSC_SATA_TF_LBAM_OFFSET = 0x10, + VSC_SATA_TF_LBAH_OFFSET = 0x14, + VSC_SATA_TF_DEVICE_OFFSET = 0x18, + VSC_SATA_TF_STATUS_OFFSET = 0x1c, + VSC_SATA_TF_COMMAND_OFFSET = 0x1d, + VSC_SATA_TF_ALTSTATUS_OFFSET = 0x28, + VSC_SATA_TF_CTL_OFFSET = 0x29, + + /* DMA base */ + VSC_SATA_UP_DESCRIPTOR_OFFSET = 0x64, + VSC_SATA_UP_DATA_BUFFER_OFFSET = 0x6C, + VSC_SATA_DMA_CMD_OFFSET = 0x70, + + /* SCRs base */ + VSC_SATA_SCR_STATUS_OFFSET = 0x100, + VSC_SATA_SCR_ERROR_OFFSET = 0x104, + VSC_SATA_SCR_CONTROL_OFFSET = 0x108, + + /* Port stride */ + VSC_SATA_PORT_OFFSET = 0x200, + + /* Error interrupt status bit offsets */ + VSC_SATA_INT_ERROR_CRC = 0x40, + VSC_SATA_INT_ERROR_T = 0x20, + VSC_SATA_INT_ERROR_P = 0x10, + VSC_SATA_INT_ERROR_R = 0x8, + VSC_SATA_INT_ERROR_E = 0x4, + VSC_SATA_INT_ERROR_M = 0x2, + VSC_SATA_INT_PHY_CHANGE = 0x1, + VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC | VSC_SATA_INT_ERROR_T | \ + VSC_SATA_INT_ERROR_P | VSC_SATA_INT_ERROR_R | \ + VSC_SATA_INT_ERROR_E | VSC_SATA_INT_ERROR_M | \ + VSC_SATA_INT_PHY_CHANGE), +}; + +static int vsc_sata_scr_read(struct ata_link *link, + unsigned int sc_reg, u32 *val) +{ + if (sc_reg > SCR_CONTROL) + return -EINVAL; + *val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 4)); + return 0; +} + + +static int vsc_sata_scr_write(struct ata_link *link, + unsigned int sc_reg, u32 val) +{ + if (sc_reg > SCR_CONTROL) + return -EINVAL; + writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 4)); + return 0; +} + + +static void vsc_freeze(struct ata_port *ap) +{ + void __iomem *mask_addr; + + mask_addr = ap->host->iomap[VSC_MMIO_BAR] + + VSC_SATA_INT_MASK_OFFSET + ap->port_no; + + writeb(0, mask_addr); +} + + +static void vsc_thaw(struct ata_port *ap) +{ + void __iomem *mask_addr; + + mask_addr = ap->host->iomap[VSC_MMIO_BAR] + + VSC_SATA_INT_MASK_OFFSET + ap->port_no; + + writeb(0xff, mask_addr); +} + + +static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) +{ + void __iomem *mask_addr; + u8 mask; + + mask_addr = ap->host->iomap[VSC_MMIO_BAR] + + VSC_SATA_INT_MASK_OFFSET + ap->port_no; + mask = readb(mask_addr); + if (ctl & ATA_NIEN) + mask |= 0x80; + else + mask &= 0x7F; + writeb(mask, mask_addr); +} + + +static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + /* + * The only thing the ctl register is used for is SRST. + * That is not enabled or disabled via tf_load. + * However, if ATA_NIEN is changed, then we need to change + * the interrupt register. + */ + if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) { + ap->last_ctl = tf->ctl; + vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN); + } + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + writew(tf->feature | (((u16)tf->hob_feature) << 8), + ioaddr->feature_addr); + writew(tf->nsect | (((u16)tf->hob_nsect) << 8), + ioaddr->nsect_addr); + writew(tf->lbal | (((u16)tf->hob_lbal) << 8), + ioaddr->lbal_addr); + writew(tf->lbam | (((u16)tf->hob_lbam) << 8), + ioaddr->lbam_addr); + writew(tf->lbah | (((u16)tf->hob_lbah) << 8), + ioaddr->lbah_addr); + } else if (is_addr) { + writew(tf->feature, ioaddr->feature_addr); + writew(tf->nsect, ioaddr->nsect_addr); + writew(tf->lbal, ioaddr->lbal_addr); + writew(tf->lbam, ioaddr->lbam_addr); + writew(tf->lbah, ioaddr->lbah_addr); + } + + if (tf->flags & ATA_TFLAG_DEVICE) + writeb(tf->device, ioaddr->device_addr); + + ata_wait_idle(ap); +} + + +static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u16 nsect, lbal, lbam, lbah, feature; + + tf->command = ata_sff_check_status(ap); + tf->device = readw(ioaddr->device_addr); + feature = readw(ioaddr->error_addr); + nsect = readw(ioaddr->nsect_addr); + lbal = readw(ioaddr->lbal_addr); + lbam = readw(ioaddr->lbam_addr); + lbah = readw(ioaddr->lbah_addr); + + tf->feature = feature; + tf->nsect = nsect; + tf->lbal = lbal; + tf->lbam = lbam; + tf->lbah = lbah; + + if (tf->flags & ATA_TFLAG_LBA48) { + tf->hob_feature = feature >> 8; + tf->hob_nsect = nsect >> 8; + tf->hob_lbal = lbal >> 8; + tf->hob_lbam = lbam >> 8; + tf->hob_lbah = lbah >> 8; + } +} + +static inline void vsc_error_intr(u8 port_status, struct ata_port *ap) +{ + if (port_status & (VSC_SATA_INT_PHY_CHANGE | VSC_SATA_INT_ERROR_M)) + ata_port_freeze(ap); + else + ata_port_abort(ap); +} + +static void vsc_port_intr(u8 port_status, struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + int handled = 0; + + if (unlikely(port_status & VSC_SATA_INT_ERROR)) { + vsc_error_intr(port_status, ap); + return; + } + + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING))) + handled = ata_bmdma_port_intr(ap, qc); + + /* We received an interrupt during a polled command, + * or some other spurious condition. Interrupt reporting + * with this hardware is fairly reliable so it is safe to + * simply clear the interrupt + */ + if (unlikely(!handled)) + ap->ops->sff_check_status(ap); +} + +/* + * vsc_sata_interrupt + * + * Read the interrupt register and process for the devices that have + * them pending. + */ +static irqreturn_t vsc_sata_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + unsigned int i; + unsigned int handled = 0; + u32 status; + + status = readl(host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_STAT_OFFSET); + + if (unlikely(status == 0xffffffff || status == 0)) { + if (status) + dev_err(host->dev, + ": IRQ status == 0xffffffff, PCI fault or device removal?\n"); + goto out; + } + + spin_lock(&host->lock); + + for (i = 0; i < host->n_ports; i++) { + u8 port_status = (status >> (8 * i)) & 0xff; + if (port_status) { + vsc_port_intr(port_status, host->ports[i]); + handled++; + } + } + + spin_unlock(&host->lock); +out: + return IRQ_RETVAL(handled); +} + + +static struct scsi_host_template vsc_sata_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + + +static struct ata_port_operations vsc_sata_ops = { + .inherits = &ata_bmdma_port_ops, + /* The IRQ handling is not quite standard SFF behaviour so we + cannot use the default lost interrupt handler */ + .lost_interrupt = ATA_OP_NULL, + .sff_tf_load = vsc_sata_tf_load, + .sff_tf_read = vsc_sata_tf_read, + .freeze = vsc_freeze, + .thaw = vsc_thaw, + .scr_read = vsc_sata_scr_read, + .scr_write = vsc_sata_scr_write, +}; + +static void vsc_sata_setup_port(struct ata_ioports *port, void __iomem *base) +{ + port->cmd_addr = base + VSC_SATA_TF_CMD_OFFSET; + port->data_addr = base + VSC_SATA_TF_DATA_OFFSET; + port->error_addr = base + VSC_SATA_TF_ERROR_OFFSET; + port->feature_addr = base + VSC_SATA_TF_FEATURE_OFFSET; + port->nsect_addr = base + VSC_SATA_TF_NSECT_OFFSET; + port->lbal_addr = base + VSC_SATA_TF_LBAL_OFFSET; + port->lbam_addr = base + VSC_SATA_TF_LBAM_OFFSET; + port->lbah_addr = base + VSC_SATA_TF_LBAH_OFFSET; + port->device_addr = base + VSC_SATA_TF_DEVICE_OFFSET; + port->status_addr = base + VSC_SATA_TF_STATUS_OFFSET; + port->command_addr = base + VSC_SATA_TF_COMMAND_OFFSET; + port->altstatus_addr = base + VSC_SATA_TF_ALTSTATUS_OFFSET; + port->ctl_addr = base + VSC_SATA_TF_CTL_OFFSET; + port->bmdma_addr = base + VSC_SATA_DMA_CMD_OFFSET; + port->scr_addr = base + VSC_SATA_SCR_STATUS_OFFSET; + writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET); + writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET); +} + + +static int vsc_sata_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static const struct ata_port_info pi = { + .flags = ATA_FLAG_SATA, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &vsc_sata_ops, + }; + const struct ata_port_info *ppi[] = { &pi, NULL }; + struct ata_host *host; + void __iomem *mmio_base; + int i, rc; + u8 cls; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* allocate host */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4); + if (!host) + return -ENOMEM; + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* check if we have needed resource mapped */ + if (pci_resource_len(pdev, 0) == 0) + return -ENODEV; + + /* map IO regions and initialize host accordingly */ + rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + host->iomap = pcim_iomap_table(pdev); + + mmio_base = host->iomap[VSC_MMIO_BAR]; + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET; + + vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset); + + ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port"); + } + + /* + * Use 32 bit DMA mask, because 64 bit address support is poor. + */ + rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) + return rc; + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) + return rc; + + /* + * Due to a bug in the chip, the default cache line size can't be + * used (unless the default is non-zero). + */ + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cls); + if (cls == 0x00) + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80); + + if (pci_enable_msi(pdev) == 0) + pci_intx(pdev, 0); + + /* + * Config offset 0x98 is "Extended Control and Status Register 0" + * Default value is (1 << 28). All bits except bit 28 are reserved in + * DPA mode. If bit 28 is set, LED 0 reflects all ports' activity. + * If bit 28 is clear, each port has its own LED. + */ + pci_write_config_dword(pdev, 0x98, 0); + + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, vsc_sata_interrupt, + IRQF_SHARED, &vsc_sata_sht); +} + +static const struct pci_device_id vsc_sata_pci_tbl[] = { + { PCI_VENDOR_ID_VITESSE, 0x7174, + PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 }, + { PCI_VENDOR_ID_INTEL, 0x3200, + PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 }, + + { } /* terminate list */ +}; + +static struct pci_driver vsc_sata_pci_driver = { + .name = DRV_NAME, + .id_table = vsc_sata_pci_tbl, + .probe = vsc_sata_init_one, + .remove = ata_pci_remove_one, +}; + +module_pci_driver(vsc_sata_pci_driver); + +MODULE_AUTHOR("Jeremy Higdon"); +MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/sis.h b/drivers/ata/sis.h new file mode 100644 index 000000000..f7f3eebe6 --- /dev/null +++ b/drivers/ata/sis.h @@ -0,0 +1,5 @@ + +struct ata_port_info; + +/* pata_sis.c */ +extern const struct ata_port_info sis_info133_for_sata; -- cgit v1.2.3-54-g00ecf