From a700f2d8e79ff80041078f160fe1edccf89b0c66 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 23 Sep 2015 12:33:14 -0300 Subject: Linux-libre 4.2.1-gnu --- drivers/ata/ahci.c | 13 +------------ drivers/ata/pata_jmicron.c | 12 ------------ 2 files changed, 1 insertion(+), 24 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index e1ba5ee9f..a074afd77 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -351,6 +351,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { /* JMicron 362B and 362C have an AHCI function with IDE class code */ { PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr }, { PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr }, + /* May need to update quirk_jmicron_async_suspend() for additions */ /* ATI */ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */ @@ -1451,18 +1452,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) else if (pdev->vendor == 0x177d && pdev->device == 0xa01c) ahci_pci_bar = AHCI_PCI_BAR_CAVIUM; - /* - * The JMicron chip 361/363 contains one SATA controller and one - * PATA controller,for powering on these both controllers, we must - * follow the sequence one by one, otherwise one of them can not be - * powered on successfully, so here we disable the async suspend - * method for these chips. - */ - if (pdev->vendor == PCI_VENDOR_ID_JMICRON && - (pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 || - pdev->device == PCI_DEVICE_ID_JMICRON_JMB361)) - device_disable_async_suspend(&pdev->dev); - /* acquire resources */ rc = pcim_enable_device(pdev); if (rc) diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 47e418b8c..4d1a5d2c4 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -143,18 +143,6 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i }; const struct ata_port_info *ppi[] = { &info, NULL }; - /* - * The JMicron chip 361/363 contains one SATA controller and one - * PATA controller,for powering on these both controllers, we must - * follow the sequence one by one, otherwise one of them can not be - * powered on successfully, so here we disable the async suspend - * method for these chips. - */ - if (pdev->vendor == PCI_VENDOR_ID_JMICRON && - (pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 || - pdev->device == PCI_DEVICE_ID_JMICRON_JMB361)) - device_disable_async_suspend(&pdev->dev); - return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0); } -- cgit v1.2.3-54-g00ecf