From 8d91c1e411f55d7ea91b1183a2e9f8088fb4d5be Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Tue, 15 Dec 2015 14:52:16 -0300 Subject: Linux-libre 4.3.2-gnu --- drivers/clk/ti/clkt_dflt.c | 316 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 316 insertions(+) create mode 100644 drivers/clk/ti/clkt_dflt.c (limited to 'drivers/clk/ti/clkt_dflt.c') diff --git a/drivers/clk/ti/clkt_dflt.c b/drivers/clk/ti/clkt_dflt.c new file mode 100644 index 000000000..1ddc288fc --- /dev/null +++ b/drivers/clk/ti/clkt_dflt.c @@ -0,0 +1,316 @@ +/* + * Default clock type + * + * Copyright (C) 2005-2008, 2015 Texas Instruments, Inc. + * Copyright (C) 2004-2010 Nokia Corporation + * + * Contacts: + * Richard Woodruff + * Paul Walmsley + * Tero Kristo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#include "clock.h" + +/* + * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait + * for a module to indicate that it is no longer in idle + */ +#define MAX_MODULE_ENABLE_WAIT 100000 + +/* + * CM module register offsets, used for calculating the companion + * register addresses. + */ +#define CM_FCLKEN 0x0000 +#define CM_ICLKEN 0x0010 + +/** + * _wait_idlest_generic - wait for a module to leave the idle state + * @clk: module clock to wait for (needed for register offsets) + * @reg: virtual address of module IDLEST register + * @mask: value to mask against to determine if the module is active + * @idlest: idle state indicator (0 or 1) for the clock + * @name: name of the clock (for printk) + * + * Wait for a module to leave idle, where its idle-status register is + * not inside the CM module. Returns 1 if the module left idle + * promptly, or 0 if the module did not leave idle before the timeout + * elapsed. XXX Deprecated - should be moved into drivers for the + * individual IP block that the IDLEST register exists in. + */ +static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg, + u32 mask, u8 idlest, const char *name) +{ + int i = 0, ena = 0; + + ena = (idlest) ? 0 : mask; + + /* Wait until module enters enabled state */ + for (i = 0; i < MAX_MODULE_ENABLE_WAIT; i++) { + if ((ti_clk_ll_ops->clk_readl(reg) & mask) == ena) + break; + udelay(1); + } + + if (i < MAX_MODULE_ENABLE_WAIT) + pr_debug("omap clock: module associated with clock %s ready after %d loops\n", + name, i); + else + pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n", + name, MAX_MODULE_ENABLE_WAIT); + + return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; +} + +/** + * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE + * @clk: struct clk * belonging to the module + * + * If the necessary clocks for the OMAP hardware IP block that + * corresponds to clock @clk are enabled, then wait for the module to + * indicate readiness (i.e., to leave IDLE). This code does not + * belong in the clock code and will be moved in the medium term to + * module-dependent code. No return value. + */ +static void _omap2_module_wait_ready(struct clk_hw_omap *clk) +{ + void __iomem *companion_reg, *idlest_reg; + u8 other_bit, idlest_bit, idlest_val, idlest_reg_id; + s16 prcm_mod; + int r; + + /* Not all modules have multiple clocks that their IDLEST depends on */ + if (clk->ops->find_companion) { + clk->ops->find_companion(clk, &companion_reg, &other_bit); + if (!(ti_clk_ll_ops->clk_readl(companion_reg) & + (1 << other_bit))) + return; + } + + clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val); + r = ti_clk_ll_ops->cm_split_idlest_reg(idlest_reg, &prcm_mod, + &idlest_reg_id); + if (r) { + /* IDLEST register not in the CM module */ + _wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit), + idlest_val, clk_hw_get_name(&clk->hw)); + } else { + ti_clk_ll_ops->cm_wait_module_ready(0, prcm_mod, idlest_reg_id, + idlest_bit); + } +} + +/** + * omap2_clk_dflt_find_companion - find companion clock to @clk + * @clk: struct clk * to find the companion clock of + * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in + * @other_bit: u8 ** to return the companion clock bit shift in + * + * Note: We don't need special code here for INVERT_ENABLE for the + * time being since INVERT_ENABLE only applies to clocks enabled by + * CM_CLKEN_PLL + * + * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's + * just a matter of XORing the bits. + * + * Some clocks don't have companion clocks. For example, modules with + * only an interface clock (such as MAILBOXES) don't have a companion + * clock. Right now, this code relies on the hardware exporting a bit + * in the correct companion register that indicates that the + * nonexistent 'companion clock' is active. Future patches will + * associate this type of code with per-module data structures to + * avoid this issue, and remove the casts. No return value. + */ +void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk, + void __iomem **other_reg, u8 *other_bit) +{ + u32 r; + + /* + * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes + * it's just a matter of XORing the bits. + */ + r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN)); + + *other_reg = (__force void __iomem *)r; + *other_bit = clk->enable_bit; +} + +/** + * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk + * @clk: struct clk * to find IDLEST info for + * @idlest_reg: void __iomem ** to return the CM_IDLEST va in + * @idlest_bit: u8 * to return the CM_IDLEST bit shift in + * @idlest_val: u8 * to return the idle status indicator + * + * Return the CM_IDLEST register address and bit shift corresponding + * to the module that "owns" this clock. This default code assumes + * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that + * the IDLEST register address ID corresponds to the CM_*CLKEN + * register address ID (e.g., that CM_FCLKEN2 corresponds to + * CM_IDLEST2). This is not true for all modules. No return value. + */ +void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk, + void __iomem **idlest_reg, u8 *idlest_bit, + u8 *idlest_val) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = clk->enable_bit; + + /* + * 24xx uses 0 to indicate not ready, and 1 to indicate ready. + * 34xx reverses this, just to keep us on our toes + * AM35xx uses both, depending on the module. + */ + *idlest_val = ti_clk_get_features()->cm_idlest_val; +} + +/** + * omap2_dflt_clk_enable - enable a clock in the hardware + * @hw: struct clk_hw * of the clock to enable + * + * Enable the clock @hw in the hardware. We first call into the OMAP + * clockdomain code to "enable" the corresponding clockdomain if this + * is the first enabled user of the clockdomain. Then program the + * hardware to enable the clock. Then wait for the IP block that uses + * this clock to leave idle (if applicable). Returns the error value + * from clkdm_clk_enable() if it terminated with an error, or -EINVAL + * if @hw has a null clock enable_reg, or zero upon success. + */ +int omap2_dflt_clk_enable(struct clk_hw *hw) +{ + struct clk_hw_omap *clk; + u32 v; + int ret = 0; + bool clkdm_control; + + if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) + clkdm_control = false; + else + clkdm_control = true; + + clk = to_clk_hw_omap(hw); + + if (clkdm_control && clk->clkdm) { + ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk); + if (ret) { + WARN(1, + "%s: could not enable %s's clockdomain %s: %d\n", + __func__, clk_hw_get_name(hw), + clk->clkdm_name, ret); + return ret; + } + } + + if (unlikely(IS_ERR(clk->enable_reg))) { + pr_err("%s: %s missing enable_reg\n", __func__, + clk_hw_get_name(hw)); + ret = -EINVAL; + goto err; + } + + /* FIXME should not have INVERT_ENABLE bit here */ + v = ti_clk_ll_ops->clk_readl(clk->enable_reg); + if (clk->flags & INVERT_ENABLE) + v &= ~(1 << clk->enable_bit); + else + v |= (1 << clk->enable_bit); + ti_clk_ll_ops->clk_writel(v, clk->enable_reg); + v = ti_clk_ll_ops->clk_readl(clk->enable_reg); /* OCP barrier */ + + if (clk->ops && clk->ops->find_idlest) + _omap2_module_wait_ready(clk); + + return 0; + +err: + if (clkdm_control && clk->clkdm) + ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk); + return ret; +} + +/** + * omap2_dflt_clk_disable - disable a clock in the hardware + * @hw: struct clk_hw * of the clock to disable + * + * Disable the clock @hw in the hardware, and call into the OMAP + * clockdomain code to "disable" the corresponding clockdomain if all + * clocks/hwmods in that clockdomain are now disabled. No return + * value. + */ +void omap2_dflt_clk_disable(struct clk_hw *hw) +{ + struct clk_hw_omap *clk; + u32 v; + + clk = to_clk_hw_omap(hw); + if (IS_ERR(clk->enable_reg)) { + /* + * 'independent' here refers to a clock which is not + * controlled by its parent. + */ + pr_err("%s: independent clock %s has no enable_reg\n", + __func__, clk_hw_get_name(hw)); + return; + } + + v = ti_clk_ll_ops->clk_readl(clk->enable_reg); + if (clk->flags & INVERT_ENABLE) + v |= (1 << clk->enable_bit); + else + v &= ~(1 << clk->enable_bit); + ti_clk_ll_ops->clk_writel(v, clk->enable_reg); + /* No OCP barrier needed here since it is a disable operation */ + + if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) && + clk->clkdm) + ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk); +} + +/** + * omap2_dflt_clk_is_enabled - is clock enabled in the hardware? + * @hw: struct clk_hw * to check + * + * Return 1 if the clock represented by @hw is enabled in the + * hardware, or 0 otherwise. Intended for use in the struct + * clk_ops.is_enabled function pointer. + */ +int omap2_dflt_clk_is_enabled(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + u32 v; + + v = ti_clk_ll_ops->clk_readl(clk->enable_reg); + + if (clk->flags & INVERT_ENABLE) + v ^= BIT(clk->enable_bit); + + v &= BIT(clk->enable_bit); + + return v ? 1 : 0; +} + +const struct clk_hw_omap_ops clkhwops_wait = { + .find_idlest = omap2_clk_dflt_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; -- cgit v1.2.3-54-g00ecf